ZTT0857
Name:ZTT0857 Joey Micro6 Name: Room Movement Sensor Description:The Six ZTT0857 button, wallmounted control Description: uses passiveroom infra-red unit. Ideal for basic to medium classrooms or technology to detect movement in a room. It is intended toboardrooms. be used with the CommBox range of control systems to allow them to automatically shut down equipment in the Extraafter notes: Unit comes complete with power pack room a period of time during which no movement is and access port (right) detected, so saving energy and maximising projector lamp life.
For your safety Please ensure that any wiring used to connect a ZTT0857 to other equipment is kept clear of mains wiring and follows applicable local wiring codes. Under no circumstances may a ZTT0857 be connected directly to power mains wiring. Make sure that the power supply you are using meets your local safety regulations and that its voltage does not exceed 15 volts DC. Unregulated power supplies can output voltages that are well above what is shown on their label. The ZTT0857 is intended for indoor use only. Dimensions
85mm x 66mm x 45mm
Mounting Height
1.1m to 3.1m
Wide Angle
15m x 15m : 90 degrees
Long Range
30m x 13 degrees
Detection zones (wide angle(
20 Dual element zones in 4 layers
Sensor
Dual Element Pyroelectric
Detect display
Red Led
Warmup period
30 seconds
Relay output
Normally Closed dry contact
Supply voltage
9 – 15v DC
Supply current
15mA
Supported by
Joey authoring software V2.7.15 and above & TCWin
COMMAND SYSTEMS Pty Ltd abn: 99 001 742 034 Telephone +61 2 9938 4811 Fax: +61 2 9905 6153 PO Box W105, Warringah Mall, NSW2100, Australia w w w . c o m m a n d s y s t e m s . c o m.a u
AUSTRALIA, CHINA, MALAYSIA, SINGAPORE, KOREA, SOUTH AFRICA