A #
157
PUBLISHED WEEKLY August 31st 2012 #05157
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Manufactured Structures Industry
Inside: NAHB Eye on Housing: Pending Home Sales Increase to Highest Level Since 2010 Home Buyer Tax Credit?... page #3
Madisons Canadian Lumber Reporter: page 13
JobLine Hiring Zone: page 21-24
New Equipment Spotlight: page 21-24
Safety First Topics in English/Spanish: page 25
Business Directory: page 26-27
Reader Response Form page 28
www.mii.com/MiTekAssurance
8 Page 2
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
Published Weekly Editor/Publisher
Adverti$er
August 31st, 2012 #05157 Page #3
Eye On Housing
Pending Home Sales Increase to Highest Level Since 2010 Home Buyer Tax Credit
Thomas McAnally tmcanally@componentadvertiser.com
Advertising
Thomas McAnally Position available August 29th, 2012
Subscriptions
The Pending Home Sales Index, a forward-looking indicator based on signed contracts, increased 2.4 percent in July 2012 to 101.7 from 99.3 in June. The July 2012 PHSI was 12.4 percent higher than the same period a year ago. The PHSI is at its highest level since April 2010 when the home buyer tax credit was about to expire.
Renae McAnally
Distributed FREE
via e-mail subscription or on line at www.componentadvertiser.com
The National Association of Realtors (NAR) reported that the July PHSI was up in all regions but the West. The year-over-year increases were 13.4 percent in the Northeast, 20.2 percent in the Midwest, 15.6 percent in the South and 1.3 percent in the West. July new home sales also declined slightly in the West from the previous month.
Download FREE and
subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011-2012
Component Advertiser
PO Box 16685 Fernandina Beach, FL. 32035 no reproduction in whole or in part without permission from the component advertiser
If contracts closed at the same time they were signed, this graph would be the correspondence between sales and the PHSI. So the PHSI is a good indicator of what will likely happen to existing home sales when the contracts close in coming months. We anticipate that the August and September existing sales data will reflect today’s pending sales report. For information, visit http://eyeonhousing.wordpress.com/
eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com
Member PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
SAWS
Don’t Forget! You Saw it in the
SAWS
Adverti$er
SAWS
August 31st, 2012 #05157 Page #4
SAWS
ASI B500 5 Blade Component Saw
•
2003 Spida Automated Truss Saw
Automated Stop & Automated Saw Rotation as directed by Truss Design Software
•
Touch Screen Computer
•
2 Available
$13,500 for One $22,500 for Both
Five blade saw that includes PC and cabinet and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut is 14 inches and the shortest angle cut is 18 inches. The saw cutsfrom 2x4 through 2x12 lumber up to 20 feet in length. Angles are set using digital readouts. Both the length and angle adjustments are power driven. $19,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
• • • •
1999 Mitek Smart Set Pro Semi-Automated 5 Blade Component Saw
Semi-Automated Saw with Touchscreen Input 5 Blades cut up to 2x12 Material from 18" to 20' in Length 240 Volt / 3 Phase $14,900 FOB CA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2001 Omni Mini-Miser Saw
-Auto Live Deck -Inkjet Print System D (Two Faces & One Edge) -Installation Available (quote upon request) $10,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FOB WY
Wasserman & Associates 800-382-0329 www.wasserman-associates.com
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
Adverti$er
August 31st, 2012 #05157 Page #5
SAWS
8
Omega Round Web Saw
LD
Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 765-751-9990
2000 Alpine AutoMill RS
SAWS
SAWS
2002 Hain Quick Rafter Cutter
2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw
1996 Mitek Combi Set 4 Blade Web Saw
SO
Model 344V saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer. The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $16,900 FOB KY. Wood Truss Systems 765-751-9990
Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS NOW $20,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
-Waste & Incline Conveyor -Extra Set of Blades -220/440 Volt - 3 Phase $12,500 FOB MO
Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
SAWS
2003 Delta 16" Radial Arm Saw
Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22". Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #6
Don’t Forget! You Saw it in the
SAWS
SAWS
SAWS
R P ed r u ice ct io n
SAWS
Adverti$er
Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329
2005 Koskovich Auto Omni Component Saw
Location: TX, Price: $11,900.00 -Power Angulation & Carriage -Internal (1,2,3,4) Blades are mounted at 90 degrees from each other -External(5) Cut-Off Blade -Lengths up to 14' -Vibrating Waste Conveyor(No Incline Conveyor) -480 Volt / 3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com
SO
2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw
LD
DePauw 5 Blade Floor Web Saw
Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical. Wood Truss Systems 765-751-9990
1987 Alpine Timber Mill 620 Pro Saw
MD MH6C-20 / SN R0347 / 230 volts 3 phase / Saw Foot Print: 40’ overall (30’ Frame & 10’ Incline) x 7’-6” tall x 8’ wide /Bought new and used in small plant / See the operational video link. WAS $8,500 NOW $8,000 FOB GA. Salter Associates 770-434-1006 www.salter.com
2006 Mitek Cybersaw AT Component Cutter
2003 Alpine Speed Cut Metra-Cut Centerline Saw with Speed Measure
SN 530 / CTC Parker Automation Touch Screen Monitor / Fully automated or manual input / Automated five-blade component saw / Cutting performed by (2) 16” – 7 HP, (2)20”- 7 HP, (1) 32”-13 HP / / Mark model DOD 8400E Controller printer (not sure about printer operability) / 24” under carriage waste conveyor & Inline / All powered movements, cuts, 2x4 – 2x12 plus 4x2 lumber / Lengths cut from 14” (11’ in manual mode) to 20’ maximum length. / Minimum. 4 angle board cut is 22’’ auto/17” manual mode / 240 volts 3 Phase / One owner bought new / Shipped out of PA / Rigging available upon request. Disassembled and ready for Inspection / shipment (except the material conveyor arms/conveyors). The saw has been stored inside building!
Industrial 18" Up-Cut Saw
-Model N-510R -2x12 Capacity Hinged Saw Guard -10 HP Saw Motor(230/460 Volt) -Add $400 for Heavy Duty 10' Infeed & Outfeed Roller Conveyor with Stands. $1,750 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
PHONE: 800-289-5627
R P ed r u ice ct io n
Location: AZ Price: $5,500.00 -20' Speed Measure, Roller Conveyor & Stands -Turntable Air Brake Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Mechanical: 4.5 Stars Appearance: 4.5 Stars Lightly used /As-Is / Where Is : PA
NOW Asking $49,000
For Additional Information Call: (707)-434-1006 Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
•
anufacturing
Don’t Forget! You Saw it in the
SAWS
SAWS
2006 Alpine AutoMill SC 5 Blade Automated Saw
2006 Monet DeSauw PD-6 Power Deck Lumber Feed System
Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $59,900 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com
-6 Chain Live Deck -16' Wide x 20' Long -Foot Pedal Control $6,750 FOB GA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Adverti$er SAWS
Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900. Wood Truss Systems 765-751-9990
2005 Dimter OptiCut S700 Wood I-Joist Crosscut Saw
800-382-0329 1998 TimberMill 4-14 Web Saw
•
2006 TCT EZ Trimmer
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
PHONE: 800-289-5627
SAWS
2002 Koskovich Auto Omni Component Saw
Location: CA, Price: NOW $9,900.00 -Cut 4x2 and 2x4 thru 2x8 Lumber from 11" to 14' -(4) 16" Blades powered by 5 HP Motors -Digital Readouts -Chain Waste & Incline Conveyor -240 Volt / 3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com
cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 765-751-9990
August 31st, 2012 #05157 Page #7
• • •
2004 MiTek Cyber A/T
Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor with Dell PC upgrade in enclosure for fully automated or manual part input, catcherside monitor, ink-jet marking system, belt scrap conveyor with incline. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode). 220v, 3ph power required. $56,900 FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
• • • • •
Optimizes, labels and cuts wood I-beams. Features 66’ long infeed for up to 60’ long, wood I-beams with 42’ long outfeed. 90/90 cuts up to 14” depths x 3 ½” wide flanges. Runs in automated batch mode or manual mode. Includes windows-based touch screen controls, console, ink-jet printing option on cut boards and 20 HP motor. Saw is operational and available to demo, touch-screen is cracked and may require a replacement estimated at $5,000. Ink jet needs maintenance. 3 Ph power required. (Saw cost $300,000 new in 2005.) $109,900 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
L-M Equipment Package Cross Cut System
65' overall length with 4 1/2" diameter hydraulic powered 4'-3" long rollers Bump Rollcase to flush up one end of the lumber unit Hydraulic controlled lumber clamping Hydraulic controlled 8' chain saw cutting bar with 10 HP motor Emergency stop safety bar at operator station 7 HP hydraulic pump system 24" wide belt scrap system Extra saw chains & 5 extra 8' cutting bars 480 Volt / 3 Phase Video: http://www.youtube.com/ watch?v=08z91mnOdbQ
Your Ad Could be Here
$19,900 FOB AZ www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
Adverti$er
August 31st, 2012 #05157 Page #8
TRUSS EQUIPMENT
Tee-Lok 14' x 24" Diameter Finish Roller plus 4 Sections of Idle Conveyor
R P ed r u ice ct io n
-Two 5 HP Motors -Conveyor Section: 6'-6" x 12-0" x 33 1/2" FOB AZ - $6,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
800-382-0329
www.wasserman-associates.com
2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta
8
n
Your Ad Could be Here
PHONE: 800-289-5627
Price: $32,900 NOW $25,900 :: FOB TN Condition: Good Category: Roof Truss Description: 86' x 14' side-eject gantry system with (11) plastic top tables with strut, with (1) model 6800 gantry roller, (+/- 75') interior conveyor and (+/- 75') exterior rollers. Includes all available system hardware and stand-alone receivers. Can be paired with the 2008 MiTek finish press for an additional $15,200. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
e ic io r t P uc ed R
-32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase
1997 MiTek Tracked Gantry System (TN)
Read/Subscribe online at www.componentadvertiser.com
1996 MiTek Floor Truss Gantry System
Price: $13,900 NOW $11,900 :: FOB TN Condition: Good Category: Floor Truss Description: Model 66100 gantry with 24" dia. roller, builds trusses from 14" to 24" deep and up to 40' in length. Includes dual safety bars, pendant control and all available system hardware. $13,900 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #9
Don’t Forget!
Wood Truss Systems
You Saw it in the
Adverti$er
inc.
765-751-9990 www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
1999 Gardner-Denver 30HP Compressor System
2008 IBS Yard Barn Wall Panel Line
PA
30 HP Gardner-Denver rotary screw air compressor with (newer) electronic control panel, model EBK99K. Rated 115 CFM. Also includes system dryer and 120 gallon air tank, recently dealer serviced. 460V, 3 phase power. $6,990 FOB IN
FO
B
-
$24,900 FOB MI
Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI
2004 Ruvo 925 Door Machine
Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA
2005 (4) Projector SL Laser System
R P ed r u ice ct io n
Four-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.
$31,300 :: FOB AZ Condition: Good 2005 Koskovich Auto Omni $52,900 FOB UT
NOW $49,900
Fax: 765-288-9991 PHONE: 800-289-5627
www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com
Phone: 765.751.9990 FAX: 800-524-4982
M ACdverti$er anufacturing
Don’t Forget! You Saw it in the
Wood Truss Systems 765-751-9990 inc.
MANUFACTURERS’ REPRESENTATIVES
www.woodtrusssystems.com
Combining the qualities and expertise you should expect from an industry supplier
Hundegger SC-1 $310,000 NOW $250,000 FOB NY
Model SC 1 saw includes vertical finger mill with 5.5 kW router motor, 40mm end mill., 25.5" diameter blade, 12.3 HP, 1480 RPM saw motor, and REA 16 pin, single-head ink-jet print option. System includes Hundegger extended infeed deck with OEM automated clamping system which includes pressurized horizontal and vertical clamps that hold and straighten twisted, bowed, and curved lumber; outfeed framework: gripper wagon is mounted – rack and pinion system. Saw is a computer numeric controller (CNC) saw capable of cutting a wide range of roof, floor, and wall framing components, including I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam. The saw can also cut 2x dimensional lumber stacked up to four pieces deep. Hundegger's Whole House Saw quickly and efficiently processes all types of cuts and profiles used in house construction. Comes with operator console, flat screen monitor, and industrial keyboard, Hundegger computer loaded with Windows XP/built in LAN card, and electronics cabinet which is A/C climate-controlled. Complete with waste conveyor system and incline, The SC 1 is upgradeable by OEM. OEM maintenance program, tech support and expert installation available at additional cost. 480 volt, 3 phase power.
TRUSS EQUIPMENT
2002 MiTek Tee-Tracker Gantry System
14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
TRUSS EQUIPMENT
Adverti$er
TRUSS EQUIPMENT
2002 Mitek RoofGlider 14' x 100' Side Eject Roller Gantry System
Mitek RoofGlider 14' x 24" Diameter Roller Gantry (Trackless). (13) Slotted Top Tables with Pop-up Skatewheel Ejectors. Roof Truss Jig Hardware & Bridge Plates. Roller Gantry Park Sections. 6 Powered Rollers, 6 Idle Rollers & 6 Receivers. Mitek 14' x 24" Diameter Finish Roller. $39,900 FOB CA Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ For more WizardPDS® Information visit: http://eideintegratedsystems.com/ Wasserman & Associates 800-382-0329 www.wasserman-associates.com
1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System 2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted). Slotted Top Tables with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers. Tee-Lok 14’ Finish Roller. Dismantled & Stored in Early 2011. Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™. $33,500 FOB SC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2006 MiTek TK-8 Clamp System
1999 Tee-Lok 40' Floor Truss Machine $18,800 FOB GA Wasserman & Associates 800-382-0329
2002 Robbins No-Rail Gantry System
Price: $79,800 :: FOB IL Robbins Side-Eject 14' x 103' working length trackless gantry system. Includes (2) Robbins gantry heads, (1) 1995 Alpine model 725 finish roller press with 15' throat, (14) slotted, steel-top tables with skate-wheel ejectors and (optional) 24" aisles, (15) powered conveyor rolls, (16) idle rolls and (13) outside heavy duty roll. Each gantry head includes an AC inverter soft start control with 15 HP drive. System includes all available jigging hardware and aisle plates. 440v, 3phase. (snow in photos not available) Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
TRUSS EQUIPMENT
R P ed r u ice ct io n
omponent
August 31st, 2012 #05157 Page #10
MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 765-751-9990
2005 MiTek RailRider End Eject Floor Machine
2003 MiTek Railrider Floor Machine
Model 82500-502, 24 inch diameter gantry head with riding platform and push-button controls. Machine builds floor-trusses to 42 foot working length (54 foot overall length) truss depth capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, plate storage along table edge. Includes all available hardware. 230 volt, 3 phase electrical. $39,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Read/Subscribe online at www.componentadvertiser.com
End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks. Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 765-751-9990
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TRUSS EQUIPMENT
Don’t Forget! You Saw it in the
Adverti$er
August 31st, 2012 #05157 Page #11
TRUSS EQUIPMENT
800-382-0329 2006 MiTek Infeed Deck
2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity. Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 765-751-9990
R P ed r u ice ct io n
Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990
2001 Alpine Track Gantry Heads (Qty. 2 Only 1 left)
Two (2) 24” diameter x 14’ throat, track gantry heads, 15’-0 ¾” rail centers, two available at this location. Price per each. 460 / 230 volt, 3 phase electrical. Price: $6,900 ea. :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1994 (50') Robbins Roof Truss Gantry
MD Super Torque / 10 HP / 7 ea. (5’x14’) steel tables with 2x6 underlayment and 1” dense plastic top / Includes (4) ea. uni-strut channels per table /(1) ea. pop-up skate roller per table / (6) Receiver arms / No Exits rollers / 15 ea. 24’x16”x1’ bridge plates / (65’) floor track / 230 volts 3 phase. WAS $15,000 NOW $14,500 FOB GA Salter Associates 770-434-1006 www.salter.com
R P ed r u ice ct io n
Design your own custom roof truss gantry!
2003 Alpine RAM Easy Rider 14’ x 104’ Trackless Roller Gantry System -2003 Alpine RAM Easy Rider 14’ Roller Gantry (Trackless) -104’ of Steel Slotted Top Tables with Pop-up Skatewheel Ejectors -Roof Truss Jig Hardware Location: -Roller Gantry Park Sections -Center Powered/Idle Exiting Conveyor with Receivers -2002 Alpine 15’-6” x 24” Diameter Finish Roller -(20) 14’ Outfeed Gravity Rollers with Stands -240 Volt / 3 Phase
CA
WAS $69,900 NOW $59,900
Optional Equipment -Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ www.wasserman-associates.com
8 PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TRUSS EQUIPMENT
Don’t Forget! You Saw it in the
TRUSS EQUIPMENT
Klaisler 6-40 Traveling Floor Machine
Tee-Lok Side-Eject 24" dia Gantry
165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware. System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Adverti$er
TRUSS EQUIPMENT
2006 Koorsen Plate Detector
Truss plate detector significantly reduces field repairs by indicating missing connection plates. Features adjustable height and missing plate alarm. Button controls on stand-alone console. +/- Footprint dimensions. 17’ x 3’ x 5’. Compatible with any type of truss roller. 110 volt, 1 phase electrical. $6,800 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
August 31st, 2012 #05157 Page #12
TRUSS EQUIPMENT
2006 MiTek Tracked Gantry Head
Price: $8,900 :: FOB TX 24" x 14' tracked gantry head with double push button pendant controls and operator platform. Fits 15'-1 1/2" rail centers. 208v, 3ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
800-382-0329 1994 Pacific Automation Auto 8 Gantry System
8'x40' hydraulic press system specifically designed for smaller trusses. No finish press required, system includes single joystick control, operator platform and drilled / tapped, steel, table building surface. 50 ton press capacity. 230 Volt, 3 phase electrical. $10,990 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Page 7 No Change...
04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform. 24 roll -10HP motor w/electric softstart. Item F1026 Truss Machinery Connections 800-580-6430
PHONE: 800-289-5627
TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press
6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase . FOB GA $14,500 Salter & Associates
770-434-1006 www.salter.com
2005 Koskovich Jet-Set
23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990
www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Don’t Forget! You Saw it in the
JobLine.com
the
800-289-JOBS
Time To Hire? We’re here when you need help!
WALL PANEL EQUIPMENT
Panels Plus Manual Framer
PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker $22,500 FOB NE. NOW $17,900 Wasserman & Associates 800-382-0329
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com
Analysts, and even the general population, have now come to realize that North American forest products is indeed not a “sunset industry” and is right now marching on toward solid recovery after the single most devastating downturn in history. This seems like a good time to look back over the peaks and troughs of the past 60+ years of the lumber business, and examine various periods. Madison’s Lumber Reporter has been published out of Vancouver, BC, weekly since September 1952. Using the vast knowledge base acquired over that time, for the next four weeks Component Advertiser readers will get a snapshot of how solid wood producers have progressed over time. Generally when people try to understand the ups and downs of a complex business like lumber they look at macroeconomic factors: US home building of course, but also; interest rates; the CA/US exchange rate; and, seasonal cycles. There are so many other things that can happen to throw business off, such as: labour disputes; storms; wildfires; and, transportation issues, whether on the rails or the roads. Taking a quick look at benchmark dimension lumber, Western Spruce-Pine-Fir KD 2x4 #2&Btr, prices over the past thirty years tells a good story of macroeconomic conditions but also reflects other factors that might not impact other, non-forestry, businesses. Between 1977 and 1991 that WSPF 2x4 prices had a relatively stable up-and-down cycle depending on the season and on general financial circumstances. From 1992 to 2000 prices surged much higher, but still following the same general cyclical trends, at an approximately $150 premium over the previous two decades. WSPF’s southern counterpart, Southern Yellow Pine, also had a sustained increase in price, just not by as much. All the searching in the world for general macroeconomic conditions will not provide answers for the reason behind this phenomenon. It happened due to the massive amount of mergers and consolidations during that time frame, in which small- and medium-sized private and family-owned companies were gobbled up by bigger companies. The “vertically integrated” lumber company was born.
Dimension Lumber Key Prices
For this week’s prices subscribe to Madison’s at www.madisonsreport.com
Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16
Last Week $314 $318 $312 $365 $375 $318 $310 $415 $328
Tr
16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 765-751-9990
WALL PANEL EQUIPMENT
Adverti$er
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
Change +8 +8 +4 +5 0 +3 +5 +5 +18
g
anufacturing
av el
omponent
in
M ACdverti$er
August 31st, 2012 #05157 Page #13
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
WALL PANEL EQUIPMENT
Don’t Forget! You Saw it in the
WALL PANEL EQUIPMENT
Adverti$er WALL PANEL EQUIPMENT
2005 Panels Plus Framing Table
Reconditioned Panels Plus 10' x 20' Squaring Table
-Squaring Stops & Roller Conveyor -Motorized Telescoping Arms (for wall height adjustments) -No Rail or Track on Floor Increases Operator Safety and Simplifies Clean-up -Excludes Router or Panel Bridge $10,900 FOB NE Wasserman & Associates 800-382-0329
Panels Plus manual wall framer builds walls to 16’ length and from 8’ to 12' in height. Includes 3-gun tool dollies each side, stud locaters, pop-up skate-wheel transfer, and motorized telescoping arms for adjusting wall height. Table also includes subcomponent layout tables and skate-wheel transition conveyor. (120v, 1ph, 100 psi air supply). Table is a trackless design for easy install. $15,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
n
e ic io r t P uc ed R 2004 Virtek LaserMC Wall Panel Cutting & Marking System
-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output -Vista Angle Boss Cut-Off Saw -20' Capacity -Left to Right Material Flow -Environmental Computer Enclosure with Computer/Monitor -Laser is burning light -Used for 2 years Location: KS, Price: $27,900.00 NOW $25,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2012 MiTek Wall Panel Framing Light Bars
In use for only four weeks. 16 foot long, enclosed set with console, stand, cables and pc. Used to indicate wall panel start point and sub-component locations when used with a framing table. Light bars are crated for shipment. Spare card, controller and plexi-glas cover included. Framer shown in pictures not included. 110 volt, single phase electrical. Price: $23,500 :: FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
WALL PANEL EQUIPMENT
2007 Panels Plus Sub-Component Nailer
2002 Mango Automated Wall Extruder OEM Reconditioned
Price: $39,900 $28,500 :: FOB TN Auto feed wall framer. It has a 16’auto conveyor on each side of the incoming feed system (out feed conveyors are not included). The Mango Automated Wall Extruder is operated using data downloaded from virtually any wall design software in the office. The wall extruder is a fast, safe and efficient way to automate your existing manual wall equipment. The system accurately sets the plate positions in front of the nail guns to ensure that the studs are in the correct position. The studs (or other features that are being assembled) can be placed anywhere, not just on fixed centers. The standard machine is designed to allow for 2 nails in each end of the stud 3 nails for 2x6 wall. Plate sizes can be 2x4 or 2x6 material without need for manual adjustment for nail position or number of nails. Features include: Minimum wall height = 6’8”, Maximum wall height = 12’0, Minimum wall length = 1’0”, Maximum wall length = 16’ . 2 x nail guns required, Able to fire 3.5” stick nails, or coil-feed nails, to suit nail reels, Power: USA / Canada 110 Vac 6 Amp, Air: 100 psi / 8cfm (Machine is disassembled and ready for shipping) Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer
2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329
PHONE: 800-289-5627
August 31st, 2012 #05157 Page #14
Read/Subscribe online at www.componentadvertiser.com
Maximum Opening: 17" x 17 1/2". On/ Off Switches for Each Nail Gun. Button to Activate Squaring Stop, Foot Pedal to Activate Clamping, Excludes Nail Guns $7,500 FOB LA Wasserman & Associates 800-382-0329
2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies
$10,900.00 FOB TN Wasserman & Associates 800-382-0329
Basic Automation 12' x 16' Interior/Exterior Wall Panel Line
Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge, Includes (25) Senco Staple Guns. $14,900 NOW $13,400 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
PHONE: 800-289-5627
Don’t Forget! You Saw it in the
Adverti$er
Read/Subscribe online at www.componentadvertiser.com
August 31st, 2012 #05157 Page #15
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Wood Truss Systems
inc.
MANUFACTURERS’ REPRESENTATIVES
Don’t Forget! You Saw it in the
Adverti$er
TRUCKS
&
TRAILERS
August 31st, 2012 #05157 Page #16
TRUCKS
&
TRAILERS
765-751-9990
Combining the qualities and expertise you should expect from an industry supplier
2005 Viking ADT Wall Panel Framing System $37,990 FOB TX
2001 Ford F-250 With Rolloff Trailer Price: $18,900 FOB IN Condition: As Is, Where Is
Viking framing station with PreStage table and conveyors. Framing station model PS-Special, includes stud locators (16” & 24” centers), skate wheel ejectors, walk-through aisles, ½ HP motor and two (2) powered tool carriages. Discharge speed of 12” per second. Once staged the framing sequence is event driven: guns fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4’-2”’ to 12’0” high, in lengths up to 20’ long. Includes two (2) 4’x 8’ plastic top setup tables, (1) set of 5’ wide x 10’ long skate wheel conveyors and (1) set of exit conveyors 24’ long. System supported, and installation available from the OEM (Sold new for $132,000). 480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Guns not included.
2001 Ford F-250, standard cab with Triton V-10 gas engine, 140,000 miles, includes a Tri-Star rolloff, dual-axle trailer with a gooseneck mount, mechanical ‘landing-gear”, GVW: 14000#. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Your Ad Could be Here
1997 ASI 48-72' Stretch Trailer
NEED HELP WITH YOUR PANELS PLUS EQUIMENT?
Price: $16,900 :: FOB TN Condition: Good Category: Trailers and Rolling Stock Description: ASI model 5AM stretch trailer from 48 to 72 feet, features sliding tandem axles, electric roll-off controls, fifth wheel connection and hydraulic lift. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
We offer:
Disassembly & packaging of equipment. Installation by trained personnel. Adjustment and calibration of equipment. Training for operators and maintenance workers. Recommend upgrade options. Assistance in getting your fastening tools mounted and operational.
Contact Information:
email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
2007 Mitsubishi FD70 Forklift
FD70 forklift weighs 23,500 lbs., featuring an OEM maximum lift capacity of 15,500 lbs., with a maximum lift height of 196 in. (16 ft. 4 in.). Features a 90 HP diesel motor powering two (2) wheels, two (2) forward gears, two (2) reverse gears, driver’s cab, and extended forks (tines) for handling wood components. $38,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
You Saw it in the
TRUCKS & TRAILERS
Adverti$er
TRUCKS
&
TRAILERS
TRUCKS
&
TRAILERS
R P ed r u ice ct io n
TRUCKS & TRAILERS
Don’t Forget!
August 31st, 2012 #05157 Page #17
1994 Wabash T-30 Trailer
48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 765-751-9990
2008 Precision 42-60' Stretch Roll-Off Trailer (4001c)
Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1999 Western Star Truck with National 990 Crane
Model 4964F Truck with 20’-6” Flatbed. 475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
1996 Lakeside 42'-60' Stretch Roll-Off Trailer
Location: NY Price: $7,500.00 -Sliding Tandems -Hydraulic Neck Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Price Reduction
Page 15 No-Change ...
2000 Raglan Trailer 48’
48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 765-751-9990
1997 Haulin 48' Roll-Off Trailer
-Sliding Tandems -Hydraulic Neck -DOT is Current FOB IN, $5,900.00 Wasserman & Associates 800-382-0329 www.wassermanassociates.com
01 Haulin (Stretch 48 -70 )
2004 Pratt 48' Roll-Off Trailer
-Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com
$8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust. Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430
1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
1999 Sterling Tractor
2000 Teledyne D50 Forklift
1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
2005 Pratt 36'-50' Stretch Roll-Off Trailer
Sliding Tandems, Hydraulic Neck. $17,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Terex Teledyne D50 straight mast forklift with 5,500 lb. capacity, 120" lift height and diesel power to (3) all-wheel drive. $8,996 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
M ACdverti$er omponent
TRUCKS
&
anufacturing
TRAILERS
Don’t Forget! You Saw it in the
MISC.
Adverti$er
Wood Truss Systems inc.
August 31st, 2012 #05157 Page #18
765-751-9990
www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
1997 PCS Hercules Auto-Feeder
1995 Wabash 36'-50' Stretch Roll-Off Trailer -Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires $9,900.00 FOB CO. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Your Ad Could be Here
2001 Klaisler Rolsplicer
The industry's best floor truss chord splicer, splices both 2 X 4 and 2 X 6, splices in vertical orientation and forces lumber together (compression) prior to plate pressing, single operator easily trained to accomplish accurate, reliable splices. Includes dual recessed simultaneous activation buttons, guarded motors and sprockets, 3 HP motor, 10 foot infeed and 20 foot outfeed conveyors. 460v, 3 phase. (Open listing to view OEM video). Price: $6,800 :: FOB IL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Refurbished 2005 Hain 20Ft. Measuring System
MISC.
2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
$4,499 FOB SC Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed. 460V, 3ph. MISC.
MISC.
Like New Altman Model 122 Dustless Sheetrock Saw
Call for Price. FOB NE. Wasserman & Associates 800-382-0329
Ruvo 2200 Stair Saw
Price: $26,667 :: FOB FL Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
1999 Sullair LS-10 Compressor with SR Dryer
25 hp Sullair rotary screw air compressor, model LS-10. Rated 111 CFM @ 100 PSI. Also includes Sullair SR-175 dryer. The compressor is 230/460V and the dryer is 230V, 1 phase power. $8,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Murphy-Rodgers MRT-9A Dust Collector
-Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums
Read/Subscribe online at www.componentadvertiser.com
$990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #19
Don’t Forget! You Saw it in the
Adverti$er
Wood Truss Systems
765-751-9990
inc.
Price Reduction
800-382-0329
www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
8
2006 Omni Miser Automated Material Picking System $89,000 FOB SD
-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000! Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!
Click for WoodRunner Details: http://apexmw.com/ MISC.
2005 Williams Pulverizer
Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.
$8,000 FOB TN
MISC.
MISC.
MISC.
2006 Allison Material Carts
Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 765-751-9990
2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2004 MiTek Lumber Splicer
MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen. Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 765-751-9990
Read/Subscribe online at www.componentadvertiser.com
Lumber/Teeter Carts
-20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
MISC.
Don’t Forget! You Saw it in the
MISC.
Adverti$er MISC.
August 31st, 2012 #05157 Page #20
Door & Stair Equipment
MMC 5-Arm Infeed Deck
Roller Table (16' x 5' x 32")
1999 Holz-Her Accura "S" 14' Beam Saw
Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329
-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Wood Truss Systems
Handles lumber from 4’ to 20’ and features 5 rails/pedestals, foot pedal controls, safety-guarded drive chain, heavy-duty steel I-beam and tubing construction and adjustable swivel base feet. Foot print +/14 x 20’. Price: $5,500 $4,500 :: FOB TN Wood Truss Systems 765-751-9990
Door & Stair Equipment
inc.
Used Builders Automation Model 2210 Staircase Assembly Clamp
Location: NE, Price: $5,900.00 Up to 20’ Stringers with Maximum Width of 54”. Pneumatic Clamping (2 CFM at 110 PSI). 9 Side Clamps Wasserman & Associates 800-382-0329 www.wasserman-associates.com
R P ed r u ice ct io n
MANUFACTURERS’ REPRESENTATIVES
Norfield Vertical Door Loader
Ruvo 2200 Stair Saw
26" Wide x 24" Deep x 66" High with 6" Legs. Polycarbonate Window. WeldedIn 12" Deep Keyboard Shelf. Three Point Locking System. Fan for Hot Air Evacuation. 2 Adjustable Shelves in Lower Cabinet. $950 FOB NE Wasserman & Associates 800-382-0329
$22,677 FOB FL AS NEW
2007 MiTek Ready Feed Live Deck
Auto-Feed live deck for component saw. 14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
Norfield 1020 Double-End Trim Saw
Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990
R P ed r u ice ct io n
NEW Strong Hold Topview Computer Cabinet
Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.
2,800 Lb Capacity. 48" Stack Height 480 Volt / 3 Phase. $9,500 FOB TX Wasserman & Associates 800-382-0329
Full House Double End Trimmer
765-751-9990
www.woodtrusssystems.com
Cut Casing, Jambs, Door Stop & Brickmold. $5,850 NOW $5,000 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
Triad/RUVO Model 928 PreHung Door Machine with Triad/RUVO Model 1275 Door Assembly Table
Location: NY Price: $28,800.00 NOW $25,000 -Excludes Bostitch Staple Guns Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2000 Hain Vent Block Drill
-Handles block sizes ranging from 2x4 through 2x12 -Drills 1,2,3 or 4 holes at a time -220/440 Volt, 3 Phase, 5 HP Motor Location: CA Price: $4,000.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #21
Don’t Forget! You Saw it in the
Adverti$er
new equipment showcase
Automated Jigging System
Hiring Zone
JobLine.com, inc.
The
800-289-JOBS
AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE
Time To Hire? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service
STRICTLY CONFIDENTIAL!
Technical Outside Sales AUTOMATE
SETUP TRUSS PROFILE IN 60 SECONDS OR LESS
RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME,
ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS
THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE MARKET, GIVES YOU A COMPETITIVE EDGE
To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO
IMMEDIATE! SENIOR TRUSS ESTIMATOR Texas NOW! send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com
Strictly Confidential! PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
California NOW!
Agressive - Experienced with MiTek Software Sales/Layout Estimating Roof & Floor Truss Focus on High End Custom Homes & Multifamily
send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential!
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #22
Don’t Forget! You Saw it in the
Hiring Zone
Adverti$er
new equipment showcase
JobLine.com, inc.
The
800-289-JOBS
Introducing the:
Purlin Plunger
SET TRUSSES FASTER WITH PREDRILLED PURLINS
Time To Hire?
We’re here when you need help! visit: www.thejobline.com
Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)
email: mail@thejobline.com or call Thomas McAnally for Personalized Service
STRICTLY CONFIDENTIAL!
General Manager Truss/Panel
P&L Responsibility for a $12-15MM Truss and Panel plant in the Upper Midwest. Must have a strong sales management background and be trained in LEAN Manufacturing. Key requirement is to be proficient in all areas of manufacturing management, with emphasis on combining individual strengths into one team effort. The ideal candidate will be good with people from employees to customers, and have a management style that builds depth, loyalty, and rewards. Six figures expected. Txt: UPGM to 406-210-1226 or call 800-289-5627 x1
Attention Employers We have over 1,000 registered Industry Professionals. All Job Searches are not public! We can search behind the scenes to find the right candidate for your opportunity.
See what I can do for you! Thomas McAnally 800-289-5627 x 1
Visit us at www.SQ-1Design.com
Specifications and Gallery
Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time
Drill heads feature “quick stop” clamping for fast drill head location movement
Drill bit detection provides warning to operator in the event of drill bit failure
Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature
Vertical and horizontal air clamping results in consistent and accurate hole placement
Touch screen PLC controls create user friendly operator interface for both manual and automatic operation
Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.
1ph. 230V power
Clamping
PLC Touch Screen Control
Drill Bit Sensor
Centerline Marking
Outfeed Deck
Outfeed Belt Conveyor
Outfeed Ejectors
Drill Head Adjustment
Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237
Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237
Catch us on thejobline.com PHONE: 800-289-5627
Scan our QR code to view our latest video http://www.youtube.com/watch?v=78A3uIJGj4U
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #23
Don’t Forget!
Adverti$er
You Saw it in the
new equipment showcase
On the Cutting Edge...
New! Porta Field Press
New! Roll Splicer
The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.
The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.
Phone: 530.295.8068
Fax: 530.295.0468
Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672
Features: • • • • • • • •
Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area
Call 770-434-1006 For Details Salter & Associates www.salter.com
We go to any lengths to expand your opportunity. PHONE: 800-289-5627
Features: • • • • • • • •
Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place
Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com
You find the opportunity -- we’ll build you the products to meet it. Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.
Each of these machines was built to provide custom details to fit the customer’s plant.
76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.
• Wall Framers
• Combination Tables – frame, square & sheath on one table
• Single or Dual Tool Beam Sheathing Bridges
Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple
An
Company
866.726.7587 or www.panplus.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Hiring Zone
JobLine.com, inc.
August 31st, 2012 #05157 Page #24
Don’t Forget! You Saw it in the
Adverti$er
new equipment showcase
The
800-289-JOBS
800-382-0329 email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
@JobLine Business Development Manager Laminated Beams
Location: South (Carolinas centered) Work with the Sales manager to determine commercial business potential in the South and surrounding states. Build relationships with contractors, architects, designers, and business owners in the commercial industry using Glulam products; responds to RFQs, sources take offs & shop drawings, prepare quote proposals & letters, estimates freight, generates bid documents, completes internal files, and manages orders & shipments for awarded bid. Txt ID: J10485 to 406-210-1226
Design Manager/PE CET, AScT
PE, CET, AScT Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities.. The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family. Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region. Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here. Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program. Canadian CET or AScT, or Degreed Architectural or Civil Engineer preferred. Detailed job description is available. Txt ID: 10486 to 406-210-1226
PHONE: 800-289-5627
NEW Monet DeSauw Wood Finger Jointing Line
Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada. Advantages: -Reduce Waste -Positive Ecological Impact -Produce Straight Material
$79,900 FOB MO
www.wasserman-associates.com
Immediate Search Estimator - Truss/Lumber Location: Texas
Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package design experience is a plus. Projects include commercial, multifamily, government, and industrial. Compensation $45-55k (minimal relocation assistance possible) Txt ID: J10498 to 406-210-1226
Priority: Immediate Search Outside Sales - Truss/Panel Location: DC/Metro
Looking for an Outside Sales rep in the DC/Metro market and surrounding areas who can bring $3-4M+ to the table. Floor Truss, Roof Truss, Wall Panels and EWP. This highly successful manufacturer has multiple plants and can easily handle all you can sell. Excellent reputation for quality, competitive pricing and on time delivery. Manufactures Roof & Floor Trusses, Wall Panels and EWP. Compensation: $70k-+, 6 figures possible Thom's Notes: One of my top 5 employers. Great benefits and outstanding advancement potential. Txt ID: J10496 to 406-210-1226
Hiring Zone
Priority: Immediate Search Designer/Senior Designer Truss/Panel/I-Joist/EWP Location: Edmonton, Canada
Priority: Immediate Search Production Manager - Truss/ Panel Location: Midwest
This is a Job in EDMONTON CANADA
Direct production of wall components, roof and floor trusses and floor systems for custom, single family homes. Plant produces 175+- homes a year. reporting to this position are 8-15 production workers. Responsibilities include production, scheduling, costing and purchasing 5-10+ years components experience required. Will consider move up if qualified.
I am looking for a high energy designer who is willing to learn and apply all aspects of truss, panel, I-Joist, and EWP design. Experience required: 5+ years in component design plus JobLine skills evaluation above average. Primary duties include design, layout, optimization, and cutting/ production documents. Secondary duties include customer service. Skills required include MiTek software, AutoCAD, will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware. Compensation: Salary from $45-75 CN depending upon experience and performance. Relocation is open to negotiation. Thom's Notes: If you are a US Citizen, the employer will also consider your application. NO DEGREE REQUIRED! Txt ID: J10497 to 406-210-1226
Read/Subscribe online at www.componentadvertiser.com
Compensation: $45-60k base salary, plus bonus potential when profits return. Vehicle w/expenses provided. Average 45-50 hours per week in peak season. Company benefits package, bonus program, vacation plan, and 401k program are detailed in our Company Profile. Relocation assistance negotiable. Thom's Notes: I need a true Operations/Plant Manager with career that doesn't require a major step back for this opportunity. Txt ID: J10041 to 406-210-1226
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #25
Don’t Forget! You Saw it in the
Safety First! Safety Meeting Topics
Adverti$er Herramientas Eléctricas Hay que Tener Cuidado
Cada año trabajadores sufren choques eléctricos al manejar herramientas y equipos eléctricos. Para proteger a los trabajadores contra los peligros de la electricidad, es necesario enseñarles los conocimientos básicos sobre Each year workers suffer shock when handling electrical tools and las causas de los choques eléctricos y la posibilidad de muerte. Uno de los grandes problemas al comprender los peligros de los choques eléctricos es equipment. To protect workers against the hazards of electricity, teach la creencia errónea de que sólo los altos voltajes pueden producir la muerte. them the basic facts about the causes of shock and death. One of the Lo que mata no es el voltaje sino la cantidad de corriente que pasa a través big problems in understanding the dangers of del cuerpo. Las condiciones y la posición del cuerpo electrical shock is the mistaken belief that only tienen mucho que ver con la probabilidad de recibir una high voltages kill. It’s not the voltage that kills, descarga eléctrica. From State Fund CA.
Electric Tools - Grounds for Concern
but the amount of current that passes through the body. The condition and placement of the body has a lot to do with the chance of getting a shock.
El agua y la electricidad pueden ser una combinación fatal. Las áreas húmedas y los objetos metálicos le ofrecen un paso fácil a la electricidad para llegar hasta la tierra. Si un trabajador tiene las manos sudadas, si los calcetines o los zapatos están húmedos o mojados, si el piso está mojado, o si el trabajador está parado en un charco de agua, la humedad permitirá que pase más corriente a través del cuerpo. Si el trabajo se hace con objetos metálicos o en áreas húmedas, el trabajador debe reconocer los peligros presentes y tomar las precauciones necesarias. Estas precauciones incluyen guantes y botas de hule, alfombrillas de hule, herramientas aisladas y láminas de hule que pueden usarse para cubrir el metal expuesto.
Water and electricity can be a fatal combination. Damp areas and metal objects can offer good shortcuts for electricity to reach the ground. If a worker’s hands are sweaty, if socks and shoes are moist or damp, if the floor is wet, or if the worker is standing in a puddle of water, the moisture will allow more current to pass through the body. If work is to be done with metal objects or in damp areas, workers should recognize the hazards and take necessary precautions. These precautions include rubber Recordar algunas recomendaciones puede ayudar a evitar accidentes gloves and boots, rubber mats, insulated tools, and rubber sheets which eléctricos: can be used to cover exposed metal. • Trate todos los cables eléctricos como si tuvieran corriente. Remembering a few tips can help avoid electrical accidents: • Treat every electric wire as if it were a live one. • Inspect equipment and extension cords before each use. • Take faulty equipment or plugs with bent or missing prongs out of service for repair. • Only qualified electricians should repair electrical equipment or work on energized lines. • If a plug doesn’t have three prongs or if the receptacle doesn’t have three openings, make sure the tool is grounded in some other way before use. • Never try to bypass an electrical system by cutting off the third prong of a plug. • Turn off the power and report the smell of hot or burning plastic, smoke, sparks or flickering lights. • Stop using a tool or appliance if a slight shock or tingling is felt. • Never disconnect an electrical plug by pulling on the cord. • Whenever working on an electric circuit, the circuit should be turned off and locked out at the circuit breaker or fuse box to ensure that the circuit cannot be accidentally turned on. • Those who regularly work on or around energized electrical equipment should be trained in emergency response and CPR.
• • • • • • • • •
•
Inspeccione los equipos y cordones de extensión antes de cada uso. Saque de servicio para su reparación a todos los equipos defectuosos o que tengan clavijas de enchufe dobladas o faltantes. Sólo los electricistas calificados deben reparar los equipos eléctricos o trabajar en líneas eléctricas activas. Si el enchufe no tiene tres clavijas, o si el tomacorriente no tiene tres agujeros, asegúrese de que la herramienta esté conectada a tierra de alguna otra manera antes de usarla. Nunca trate de enchufar un equipo eléctrico cortándole la tercera clavija al enchufe. Corte toda la alimentación eléctrica y reporte cualquier olor de plástico caliente o quemado, humo, chispas o luces parpadeantes. Deje de usar la herramienta o equipo electrodoméstico si se siente un choque ligero o cosquilleo eléctrico. Nunca desconecte un enchufe tirando del cable eléctrico. Siempre que trabaje con un circuito eléctrico, éste deberá tener su alimentación desconectada y bloqueada en el cortacircuitos o caja de fusibles correspondiente para asegurar que alguien no pueda conectar accidentalmente la alimentación a dicho circuito. Las personas que normalmente trabajan en equipos eléctricos con corriente o en sus alrededores, deben estar entrenados para dar auxilio ante emergencias y en reanimación cardiopulmonar (RCP).
Durante los meses lluviosos de invierno, se debe tener aún más cuidado
In wet, winter months, extra caution should be observed when working al trabajar con equipos eléctricos o cuando se trabaja cerca de objetos with electrical equipment or when working near grounded objects. conectados a tierra. The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #26
Don’t Forget! You Saw it in the
Adverti$er
Used Equipment Wanted!
765-751-9990
Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16
Toll Free: 800-382-0329 www.wasserman-associates.com
Take Back Your Business Become More Competitive with:
Powerful Software High Quality Connector Plates Independent Established Supplier
All at a Great Price
For a software demonstration call 1-800-652-6050 www.keymark.com
Join the Southern Pine Partnership! Since 1915
2012 BUILDING COMPONENT MANUFACTURERS CONFERENCE CEUs PDHs
ENG. WOOD
FIRE
HIRING
LEGISLATIVE
SBC ASSOCIATION
SBC MAG.
STEEL
TESTING
TPI
TRAINING
As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org LOGIN Home Menu didn't load. Click here or refresh to view. For Attendees
JobLine.com
The
About New Orleans
JOIN SBCA
CONTACT US
SITE MAP
QUESTIONS
Register Here: http://bcmcshow.com/
, inc.
Show Schedule & Events BCMC Build
800-289-JOBS(5627) BCMCs Past Join SBCA
BCMC History
Control Panel/Options
Time to Hire? Contact Us HELP
Affordable
Recruiting & Testing
www.thejobline.com PHONE: 800-289-5627
Since 1992
Read/Subscribe online at www.componentadvertiser.com
2012 Building Component Manufacturers Conference © Menu | Legal
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #27
Don’t Forget! You Saw it in the
Adverti$er
Business Listings
JobLine.com, inc.
The
800-289-JOBS
Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers
www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com Wood Roof & Floor Trusses Wall Panels Engineered Components
CAD Design
Gould Design, Inc. Designing to your needs... A. One Gould project at -a time. Christopher President
Time To Hire? We’re here when you need help!
www.thejobline.com
Designing to your needs... One project at a time
Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards Industry Leading Professionals at your fingertips Overall design department cost reduced, saving you $$$ Experienced with multiple industry design software suites Up to date with US & Canadian Building Codes
(772) 475-3583 - Call Today
cgould@goulddesigninc.com | www.goulddesigninc.com
Your Ad Could be Here 2”x3” Single Card
$195 per YEAR! Sizes & Rates on-line
www.componentadvertiser.com
or call 800-289-5627 x 1
Mylon Stark
Professional Services Anywhere, Anytime Invest In Your People!
Here's a partial list of services BPS will provide to your operations:
• • • • • •
Improve Your Net Profit !
• •
Time Standards
(R.E., S.U. & Man-Minutes also known as Houlihan Method)
Proper Production Efficiencies, Pricing , Scheduling
Supervisor & Leadership Development Safety Integration Development of Safety Committees Developing Personal Responsibility for Operational Success Workplace Safety & Health Training for "Best Practice" Application OSHA and MSHA-related Training and Education Jobsite and Facility Audits and Inspections Incident Investigations
888.519.4130 toll-free
Lean Manufacturing Practices All Areas Are Covered 50% Shop - 50% Office Manufacturing, Design,
Admin Practices
Sales and
Tailored for Your Company
605.220.2342 mobile
info@bigpicturesafety.com www.bigpicturesafety.com
Truss Shop Labor Tracking Software Easy to use Software Track Your Labor Efficiencies and Labor Cost
Todd Drummond Consulting, LLC www.todd-drummond.com
todd@todd-drummond.com
Phone 603-763-8857
20 Years in Truss Industry - 9th Year in Consulting Service - 50+ Clients
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
Your Ad Could be Here 2”x3” or 3”x2” Single Card
$195 per YEAR! 3”x4” Double Card
$295 per YEAR! Sizes & Rates on-line
www.componentadvertiser.com
or call 800-289-5627 x 1
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
August 31st, 2012 #05157 Page #28
Don’t Forget! You Saw it in the
Reader Response Form FAX to: 800-524-4982
Adverti$er
Reader Response Sponsors
or email: info@componentadvertiser.com Name: ____________________________________________________ Company: ______________________________________________ Address: ______________________________________________ City:____________________________ State:______
Zip:______
Phone: _________________________ Fax: ______________________ Email: ____________________________________________________ How would you like to be contacted? Phone Fax Check All that Apply Email
Wood Truss 765-751-9990 Systems inc.
Combining the qualities and expertise you should expect from an industry supplier MANUFACTURERS’ REPRESENTATIVES
www.woodtrusssystems.com
Would you like to be a Reader Response Form Sponsor?
Call 800-289-5627 x 1 or Email info@componentadvertiser.com
List of Items you are interested in: List the Page # and Title of the item. Page # Item Title ____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
Would you like to be added to our subscription list?
PHONE: 800-289-5627
Yes:
www.mii.com/MiTekAssurance
WWW.SPIDA.CO.NZ
No:
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
CSS Automated saw for fast, accurate production of timber components
The CSS automatically sets up for angles and lengths
The CSS will cut at least double the amount of a manual saw
Jobs are downloaded to the saw via LAN, Floppy or removable media
Set up left or right hand timber flow to meet your requirements
CSS PACKAGE INCLUDES:
10 ft (3 metre) roller infeed table
20ft (6 metre) outfeed automated bench table
CXM saw
Rockwell Automation
17 inch Industrial flat touch screen
Custom designed software
A: 31 ALLEN MILLS ROAD, ROTORUA, NEW ZEALAND 3010 P:+64 7 345 8088 F:+64 7 345 8087 W: WWW.SPIDA.CO.NZ