#
170
PUBLISHED MONTHLY
September 1st 2013
COMPONENT MANUFACTURING dverti$er
#06170
A
SERVING THE STRUCTURAL BUILDING COMPONENTS INDUSTRY
Inside: BCMC: page 3
Layman’s Lumber Guids: Guids: page 9
Madisons Canadian Lumber Reporter: page 19
JobLine Hiring Zone: Available Jobs Available Candidates page 24-30
New Equipment Spotlight: page 26-29
Safety First Topics in English/Spanish: page 31
Business Directory: page 32 Advertising Rates and Reader Response Form page 33
See you at.....
BCMC
Page 2
Component Manufacturing Advertiser
September 1st, 2013
M ACdverti$er OMPONENT
ANUFACTURING
Published Monthly Editor/Publisher Thomas McAnally tmcanally@componentadvertiser.com
Advertising Thomas McAnally Position available
September 1st, 2013 #06170 PAGE #3
Don’t Forget! YOU SAW IT IN THE
Adverti$er
BCMC Show Edition
Where has 2013 gone? It’s already time for BCMC, a great chance to network and do some business y’all. We are exibiting this year so stop by our booth, say hi and subscribe to the Component Manufacturing Advertiser. It’s free!
Thomas McAnally - Editor
Subscriptions Renae McAnally
Distributed FREE via e-mail subscription or on line at www.componentadvertiser.com
Download FREE and subscribe by e-mail at www.componentadvertiser.com
BCMC 2013 in San Antonio, TX October 8-10
News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources. Deadline is the 25th of each month. Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011-2012-2013
Component Advertiser PO Box 16685 Fernandina Beach, FL. 32035
BCMC does a great job identifying areas component manufacturers struggle with and then provides an opportunity through the educational sessions and other events to learn and improve.
Jess Lohse, Rocky Mountain Truss
NO REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION FROM THE COMPONENT ADVERTISER
eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above.
BUILDING COMMUNITY
BCMC
Archive Copies Available On Line www.componentadvertiser.com
MAKING CONNECTIONS
bcmcshow.com
Member PHONE: 800-289-5627
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
SAWS
2005 Spida Automated Truss Saw Automated Stop & Automated Saw Rotation as directed by Truss Design Software. Touch Screen Computer with Generation III Software. Laser Guide, Clamping Roller Table $13,900 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
PHONE: 800-289-5627
Don’t Forget! YOU SAW IT IN THE
Adverti$er
SAWS
SAWS
Idaco Webmatic 4 Blade Web Saw Manual Angulation, 9" to 16' Length Capacity. Waste Conveyor(under saw) needs New Belt(approximately $400). 480 Volt/3 Phase. Excludes Incline Waste Conveyor(adjacent to saw). $6,000 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2002 Hain Quick Rafter Cutter Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
September 1st, 2013 #06170 PAGE #4
SAWS
2005 Mitek Hercules 30' Auto Feeder Location: AZ Price: $6,950.00 NOW $6,500.00 -6 Chain Live Deck -16' x 30' Footprint -Auto or Manual Lumber Feed -460 Volt / 3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
SAWS
Don’t Forget! YOU SAW IT IN THE
Adverti$er
SAWS
September 1st, 2013 #06170 PAGE #5
SAWS
R P ed r u ice ct io n
800-382-0329
2005 Alpine PF-90 Saw with AutoMark Option Automated under-table saw with 20" blade can cut multiple pieces with a single up-cut stroke. AutoMark uses data from design software and accurately marks stud, cripple and jack locations, job and panel number, sub-component and window/door locations, and sheeting locations on both top and bottom plates simultaneously. OEM rated at 1,000 linear feet per hour. 16’ lumber length. Cutting envelope of 3 1Ž2” X 14”, marks on edge of two stacked boards laying face down. This saw has been recently tested and reprogrammed by OEM including the Matthews DOD8000 marking system. 240v, 3Ph/ 110v for PC. System originally sold for $75,900; equipment has extremely low hours (was used for a matter of weeks when installed new. $59,995 FOB MD Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2004 TCT EZ Trimmer Model CT041-2000. 2x3, 2x4 & 2x6 Capacity. Double Bevels on Pitches from 0/12 thru12/12. Cycle Time: 15 Pieces / Minute. Air: 9 CFM at 80 PSI. Electrical: 230 Volt / 3 Phase / 20 Amp / 5 HP Motor. Out of Production Since Late 2008. Price: $4,950.00. FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2003 Alpine Metra-Cut Saw w/20' Hain Measuring System 5 HP Motor with 16" Blade. 230/460 Volt, 3 Phase. 20' Hain Powered Measuring System & 10 Infeed Roller Conveyor. Turntable Air Brake. Price: $6,900.00 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Safety Speed Cut H5 Panel Saw Safety Speed Cut model H-5, vertical panel saw utilizes 3.25 H.P., 15 amp 120v industrial saw motor, double guide tube bearings, molded plastic material rollers, adjustable rulers, 8" blade and frame length of 120”. Crosscut material up to 64" wide and 1 ¾” thick, unlimited rip cut length. Includes optional wheels and stand. Price: $1,690 :: FOB IL Condition: Good Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2005 Maximizer Technologies Max Custom Cutter -Model WA420 (4 High - 20' Capacity) -Automated Length & Angle Function as directed by Truss Design Software Output -220 Volt/3 Phase Safety Speed Cut H-5 Panel Saw (IN) -Installation & Operator Training available Safety Speed Cut, model H-5, vertical at additional cost panel saw utilizes 3.25 H.P., 15 amp 120v $45,000 NOW $38,500 NOW $32,500 industrial saw motor, double guide tube FOB NE bearings, molded plastic material rollers, adjustable rulers, 8" blade, Crosscut material www.wasserman-associates.com up to 64" wide, and 1 ¾” thick, unlimited rip cut length, includes optional wheels and stand. Wheels need repair. Price: $1,799 :: FOB IN. Condition: Fair. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
COMPONENT MANUFACTURING dverti$er
A
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
L-M Portable Electric Yard Saw L-M Equipment Portable yard saw for pre-cutting bunks of lumber to length for automated component saws or studs, etc. 7.5 h.p., 208vac, 3ph power, .404 pitch saw chain, 15'+ electrical lead, auto-oiler, pneumatic tires, cuts 63” x 9mm kerf for processing up to 40"x44" lumber bunks. $1,740 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
1996 MiTek Combi-Cut Saw Four blade saw cuts from 2 to 20 feet in depths from 2x4 through 2x12. Can cut 4x2 from 2 foot long 90/90 blocks and 2 foot long four angle webs. Features digital readouts for both angles and length, powered angulation and length, and belt-type scrap system with scrap incline. (Two hold-down arm motors need to be replaced). 460v, 3 phase power. $3,990 FOB KS. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
Mitek Hercules 20' Live Deck 6 Chain Live Deck, 16' x 20' Footprint, Auto or Manual Lumber Feed. $4,400 FOB CA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
Simpson Strong-Tie® Component Solutions™ Software Suite
The new Simpson Strong-Tie® Component Solutions™ suite of truss and component software is intuitive, user friendly and integrated for your business. You can create truss and panel designs optimized for production efficiency and receive engineering seals direct from Simpson Strong-Tie.
Introducing Integrated Component Systems – Truss Plates, Software and Solutions When it comes to manufacturing metal connectors, there is no other company with the track record of reliability and performance like Simpson Strong-Tie. Our new connector-plate manufacturing facility incorporates state-of-the-art technology to consistently produce top-quality plates with some of the highest loads in the industry. With our Integrated Component Systems, our truss customers can take advantage of all the elements of the Simpson Strong-Tie® offering. It includes our new 3D modeling Component Solutions™ software, a full line of high-quality, code-listed truss connector plates, comprehensive training, unsurpassed customer service, and our wide range of Simpson Strong-Tie structural connectors, fasteners, anchors and lateral systems. Our long-term commitment to this industry has never been stronger. To learn more about Simpson Strong-Tie® Integrated Components Systems, call (800) 999-5099 or visit www.strongtie.com/ics.
A heritage of integrity, leadership and putting the customer first
© 2013 Simpson
Strong-Tie Company Inc. TRUSS12
OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Adverti$er
R P ed r u ice ct io n
SAWS
2005 (12/05) Wyrks Tool / Omega Double End Web Cutter 2005 (12/05) Wyrks Tool / Omega Double End Web Cutter / Model 12-05-J-260038 / Cuts 2x4, 4x2 & 2x3 Rounded End RT&FT Webs / Electric and Hydraulically Powered / 460 Volts 3 Phase / Bought New in 2005 for $70k The rounded end web system that can replace up to 70% of conventional angle cut webs and they deliver equivalent performance. The system is a field proven manufacturing system that saves hours of cutting and assembly time, which can greatly reduce costs. It consists of the rounded Roof and Floor webs. Rounded webs are a fully tested alternative to conventional truss webs. Design procedures for both lumber design and plate connections are in full compliance with ANSI/TPI 1-2002 “National Design Standard for Metal Plate Connected Wood Truss Construction." Mechanical: 4 Stars Appearance: 3 Stars $6,000. NOW $4,800 FOB: GA Salter Associates 770-434-1006 www.salter.com
SAWS
800-382-0329 Late 2007 Alpine X4 Linear Saw
$67,500 FOB IA
-Touch Screen Control Panel -5 Axes of Automation -15 HP Motor with 22" Blade -Cut 1, 2, 3 or 4 Boards at the same time
-Ink Jet Printer -Auto Feeder (Live Deck) -Hydraulic Clamping -2 Outfeed Conveyors for Sorting -Incline Waste Conveyor -Installed January 2008, Out of Service March 2010
R P ed r u ice ct io n
M ACdverti$er
September 1st, 2013 #06170 PAGE #8
Tiger Stop with Uppercut Saw Tiger Stop (20’) with Lauderdale-Hamilton Uppercut Saw / TigerStop is the industry leading positioning system that has transformed measuring forever. Enter a length and process your part... It’s just that simple! The TigerStop automatic stop/ gauge and pusher system is the perfect addition to almost any machine tool in your shop where ease of setup, ease of use, and accuracy are required. No more battle of the tape measures—every part’s the same with a TigerStop linear measuring system. Employees can be trained in a matter of minutes and be top performers by the end of the day. 120 Volts (Tigerstop) / 460 Volts 3 Phase (Saw) View a demonstration (see video icon) of the famous Tigerstop Automatic Stop System and learn how you can save over 33% of you labor on cut to length applications Mechanical: 4 Stars Appearance: 3 Stars $7,500. NOW $6,000 FOB: GA Salter Associates 770-434-1006 www.salter.com
R P ed r u ice ct io n
www.wasserman-associates.com
2000 Koskovich Auto Omni Saw 5-blade automated saw includes shaker waste conveyor with factory side pan deflectors, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, ink-jet marking system, remote monitor with cabinet, Exair cabinet coolers, all available spares, and shaker-pan conveyor. 208/240/480 volt,3 phase, 100 Amp and 120 vac, 90 Amp electrical required. $24,890 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
2007 Triad Plate Marking Saw Model PL Saw, high-speed percussion marking and cutting system. Includes two case-hardened marking emblems, touch screen, programmable controller, Servo motor controls with speeds up to 290 fpm feed rate. 10 HP saw motor, 18”, 60-tooth carbide saw blade, dual V-belt, feed pusher, pneumatic material clamps and hold downs. Steel construction with leveling feet. Cuts 2x4 to 2x8 inch plates at 90 degrees or miter cuts up to 45 degrees. 220 volt, 3 phase electrical. $42,500 FOB UT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Hain 21’ Measure System with DeWalt Saws Hain Company measuring device model MEA, 1/4 HP electrical linear actuator unit with steel stops and pusher, 21 foot long, measures material lengths up to 22’ in feet, inches and fractions of an inch. Includes two commercial grade DeWalt, custom mounted chop saws, with 20’ infeed and 10’ outfeed HD Hytrol conveyor with legs. This Hain MEA is a consistent way to measure your product, can adapt to any saw. 120 VAC electrical. $6,800 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
2003 Spida (Automated) Saw (ID 144) 2003 Spida (Automated) Saw / monitor / CPU / 10ft in feed roller table / 20ft bench out feed table and automation system Spida CSS, designed for use in both truss and wall frame cutting, automatically sets up for angles and lengths. The Spida SSS (Automation System) can typically cut at least double the amount of a manual saw. Jobs are downloaded to the saw via network or removable media with simple operation. / Model CSM 4560-5.5 / SN 2006 / 460 Volts 3 Phase. $8,500 NOW $6,800 FOB GA. Salter Associates 770-434-1006 www.salter.com
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Adverti$er
September 1st, 2013 #06170 PAGE #9
August 26, 2013
The Invisible Edge...Scale Trading
7
Layman’s Lumber Guide creates an Invisible Edge, an Unlevel Advantageous Playing Field. This is accomplished by forecasting reversal highs and lows (Forecasted Decision Points.) Once identified, up to one year in advance, the optimum trading strategy...SCALE TRADING...is implemented. Scale Trading is an Inventory Management (IM) strategy; increasing or decreasing inventory in preparation for approaching market reversals. There are three IM strategies. Accumulate prior to rising markets, Liquidate prior to falling markets, and Maintain during flat market.
FDP Reversal Lows/Scale-IN/Consumer Inventory Accumulation. This is accomplished by Scale-IN buying..."lumber dealers" et al., buying more than selling (Speculatively). The recommended time period is three weeks... the week before, week of, and week after a Forecasted Decision Point Reversal Low. This protects against an early or late reversal and averages the position at or near the bottom turn. Ideally, the volume purchased should be enough to last two weeks beyond the next FDP Reversal High to eliminate buying at a top...one third each week. Producer Inventory Accumulation is accomplished by resisting order files prior to FDP Reversal Lows. FDP Reversal High/Scale-OUT/Consumer Inventory Liquidation. This is accomplished by Scale-OUT Buying...consumers buying less than selling, (Just-In-Time). The recommended time frame is three weeks prior to an FDP Reversal High, being completely out of the market, the week prior, week of and week after the projected FDP Reversal High.
Producer Inventory Liquidation is accomplished by expanding order files prior to FDP Reversal Highs. Maintaining Inventory is self explanatory. Layman’s Lumber Guide subscribers trade these Inventory Management, Scale Trading strategies as FDP reversal highs and lows approach. They have an Invisible Edge that builds an Advantageous Unlevel Playing Field. This week, #35, is an FDP reversal high. We are marching towards the fall FDP low, week #41, which is your best lumber market investment opportunity of the annual cycle. Request current Layman’s Lumber Guide market forecast from matt@ laymansguide.org. Happy Trading...ml Lumber Market Intelligence
Forecasted Decision Points, Inventory Management & Trading Strategies Since 1984...29 Years of the Lumber Market’s BEST ANALYSES Matt Layman, Publisher, Layman's Lumber Guide is an Associated Person (AP) and principal of MCL Trading, LLC and an Associate Member of the NFA. MCL Trading, LLC is a registered Commodity Trading Advisor (CTA) with the CFTC and a Member of NFA. Matt Layman, Publisher 145 N. Main St., Cramerton, NC 28032 Phone or Text: 336-516-6684 Fax: 888-811-6917 email to: matt@ laymansguide.org. Reprint or distribution is unlawful without permission. Bi-Weekly Publication, month-to-month Subscription Rate: $89/month Monthly Publication, month-to-month Subscription Rate: $29/month PHONE: 800-289-5627
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
SAWS
2007 Triad Plate Marking Saw Model PL Saw, high-speed percussion marking and cutting system. Includes two case hardened marking emblems, touch screen, programmable controller, Servo motor controls with speeds up to 290 fpm feed rate. 10 HP saw motor, 18”, 60-tooth carbide saw blade, dual V-belt, feed pusher, pneumatic material clamps and hold downs. Steel construction with leveling feet. Cuts 2x4 to 2x8 inch plates at 90 degrees or miter cuts up to 45 degrees. 220 volt, 3 phase electrical. $$42,500 FOB UT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE SAWS
2003 Klaisler END-EJECT Gantry System 70' End-eject system complete, 67' buildable surface with nine 14'x6', all-steel, slottedtop, tables featuring , recessed rail (contained under the production table). GR14-24 Gantry Roller features: 24” diameter x 1” wall minimum x 14’ lg. roller, two-5HP SEW-EURODRIVE gearmotors with mechanical fail-safe brakes, 3” diameter shafts full length supported by 4 interior baffles, spherical roller bearings, 120’ per minute fixed working speed (optional speeds available), “Soft Start” inverter, flashing motion indicator beacon light, emergency shut off bars, recessed 4-Wheel Drive under the tables, with operator riding-platform. Final Roller model TR214H-24 with 2 x 24” diameter x 1” wall minimum x 14’ lg. rollers, two -5HP SEW-EURODRIVE gearmotors with mechanical fail-safe brakes, 90’ per minute fixed working speed (optional speeds available), emergency shut off bar. Includes outside conveyor consisting of two -model 6414i idle conveyor sections each section with 14’ rollers x 20’ long (6 rollers per section), 1” pillow block bearings, 32” working height. Includes all available system hardware, 460 Volt 3-Phase power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Adverti$er SAWS
2002 Spida (Automated) Saw (ID #109) 2002 Spida (Automated) Saw / monitor / CPU / 10ft in feed roller table / 20ft bench out feed table and automation system Spida CSS, designed for use in both truss and wall frame cutting, automatically sets up for angles and lengths. The Spida SSS (Automation System) can typically cut at least double the amount of a manual saw. Jobs are downloaded to the saw via network or removable media with simple operation. / Model CSS 4560-5.5 / SN 1146.4 /460 Volts 3 Phase Mechanical: 2.5 Stars, Appearance: 2 Stars $6,500 NOW $5,200 FOB: GA Salter Associates 770-434-1006 www.salter.com PHONE: 800-289-5627
SAWS
2005 Virtek Laser MC-20 Automated plate cutting/laser burning layout system with right to left feed of material up to 20'. System is complete with Virtek Laser MC Class IV laser w/computer workstation in OEM environmental enclosure. Laser burner is combined with Vista Angle Boss undertable, angulating, cut-off saw and infeed table with lumber advance pusher bar. 20" blade, 480V, 3ph power. Safety guards, Windows operating system. 460V, 3ph power for saw, two 110 volt, single phase circuits required for the PC and the laser. 80 PSI air. Price: $46,890 :: FOB ID Condition: Good Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Wood Truss Systems 765-751-9990 inc.
MANUFACTURERS’ REPRESENTATIVES
www.woodtrusssystems.com
Combining the qualities and expertise you should expect from an industry supplier
1992 (2005) Koskovich Auto Omni Component Saw
R P ed r u ice ct io n
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
September 1st, 2013 #06170 PAGE #10
Price: $49,900
NOW $9,950 2006 Mango Automation Plate Marker with 24" Upcut Saw Automated cutting and marking with a Lauderdale-Hamilton under-table saw (24" blade), dust collector, paired with a Mango Automation plate marker touch-screen input system for fast accurate material cutting. 120v, single phase electrical required for Mango Automation computer and vacuum. 230v, 3 phase electrical service required for upcut saw. $13,890 FOB AB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FOB OH 4-blade s/n AO920xxR, This saw was completely rebuilt by the OEM in 2005 and has seen light duty since. The saw includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers, and all available spares.
HUGE PRICE REDUCTION!
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
SAWS
1989 HydroAir 5-Head Component Saw Price: $8,925 :: FOB MO Condition: Good Category: Saws Description: Five head saw with powered angulation reconditioned by Monet in 2004, Cuts from 1'-9" to 18' at 90/90, Includes shaker pan waste conveyor with incline and all available system hardware. Wood Truss Systems 765-751-9990
Whirlwind Saw with Tiger Stop Whirlwind up-cut saw with 18" blade and 16’ long Tiger Stop. Includes in-feed and out-feed conveyor, left-hand feed, 10 HP motor and additional roller conveyors without legs. 230 volt, 3 phase electrical. Price: $7,890 :: FOB IL Condition: Good. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Don’t Forget! YOU SAW IT IN THE
Adverti$er
September 1st, 2013 #06170 PAGE #11
SAWS
Integrated Stealth Technology Roof Truss Equipment Safety Speed Cut Model 6400 Panel Saw Heavy-duty, 3 HP worm gear driven saw motor for higher-production, OSB and sheathing cutting. 10 foot wide frame with welded steel supports, 1 3/4" guide tubes, guide tube bearings and machined aluminum material rollers. Blade 7 1/4" diameter. Cutting accuracy of 1/64". Cuts panels up to 64" wide. Adjustable vertical and horizontal rulers, thin material pressure guard and counterweight system. 120 volt, 1 phase electrical, 13 amps. Price: $2,490 :: FOB OK Condition: Good. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com TRUSS EQUIPMENT
Side Eject or End Off Trackless Truss System We have complete Roof Truss Systems. End-Off Systems or Side Eject Systems customized to whatever your plant needs may be. These are Steel Slotted Tables that come to you Auto-Plank ready so when you decide the time is right we just need to send the components to install on the plank and plug the wires in and you’re ready to go.
14’ Systems in Crane rail or Trackless Gantries in Stock Aisle ways or full table top. Side- ejects or End-off design All Truss Systems are turn-key Auto-Jigging quoted as an option with all systems. Let us Custom Design a Truss System to fit your needs today! 1-517-323-1996 Office | Ed’s cell 1-517-285-4838 | www.integratedstealth.com
2006 Mango Apollo Saw 2006 Apollo saw[s] featuring Direct-Drive 5.5 h.p. 220/440v, 3ph power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37” cuts with an 18” blade. Features stroke limiter, powder-coat finish, 20' conveyor on the feed side and 10' conveyor on the exit side with vacuum dust collector. OEM Installation and service agreement available from MangoTech USA. $8,890 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
MiTek TK-8 and TK-7 Clamp Assemblies Quantity of (3) MiTek TK-8 C-Clamps and (3) MiTek TK-7 C-Clamps. Each assembly has cast C-Clamp, boom, reservoir, trolley & button control. One of the TK-7s and one of the TK-8s have a wider opening for use with floor truss assembly (4x2), when the spacers are removed. 220V 1ph electrical. Price is per each. Extra clamp parts include: seven pistons, one barrel, four bottom pressure plates, five gaskets, and two C clamp frames, can be purchased as a set for an additional $1,000. Price: $1,595 ea. :: FOB KS Wood Truss Systems 765-751-9990
M ACdverti$er OMPONENT
ANUFACTURING
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
TRUSS EQUIPMENT
Alpine "Mighty Mite" Truss Assembly System 5' x 20' Table with Plastic Top $8,900 fob ne Wasserman & Associates 800-382-0329 www.wasserman-associates.com
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
TRUSS EQUIPMENT
Eagle TP600 C-Clamp Roof Truss Press 1 1/8 HP / 230 Volt / 1 Phase Motor & Pump. 5 1/4" x 6 1/4" Platen. 11 1/4" Throat. Includes Boom & Trolley. Excludes Overhead Beam & Jig Table. $5,900 FOB NC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982
Automated Jigging System AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE
AUTOMATE SETUP TRUSS PROFILE IN 60 SECONDS OR LESS RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME, ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS
THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE MARKET, GIVES YOU A COMPETITIVE EDGE
To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO
ROLSPLICER ??? Yes, We do!! Square 1 Design & Manufacture ~ 400 N. Forsythe St. Ste 7 Franklin, IN 46143 ~ (317) 354-5438 www.SQ-1Design.com "Passionate About Our Work and Dedicated to Our Service"
M ACdverti$er OMPONENT
ANUFACTURING
September 1st, 2013 #06170 PAGE #14
Don’t Forget! YOU SAW IT IN THE
Adverti$er
Wood Truss Systems 765-751-9990 inc.
MANUFACTURERS’ REPRESENTATIVES
www.woodtrusssystems.com
Combining the qualities and expertise you should expect from an industry supplier
1995 Pacific Automation LT-14 80’ Gantry Side-eject roof gantry system, 14’ X 80’ working length includes LT-14 gantry head with 15 HP hydraulic drive, 50 ton pressing force, 24” wide platen, 1” to 6” stroke and inverter drive, 80’ worth of idle and power conveyors. Featuring slotted steel, J-Slot tables, 6’ x 14’ each. Gantry does not require a final roller. Includes all avilable system hardware. Used Pacific Automated finish roller press, 24” diameter x 14’ throat, is available at an additional $9,900.
Integrated Stealth Technology Floor Truss
$87,500 FOB ND Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
•
Heavy-duty 3/4” steel top 1/2” camber pre-built into steel table top 10HP motor with variable speed drive & industrial brake Full auto clamping
• • •
On table splicing Double splice tray full length of table IST will manufacture to your plants specifications.
TRUSS EQUIPMENT
TRUSS EQUIPMENT
g
• • •
in
VALUE ADDED IMPROVEMENTS
1-517-323-1996 Office | Ed’s cell 1-517-285-4838 | www.integratedstealth.com TRUSS EQUIPMENT
Design your own custom roof truss gantry! Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990 PHONE: 800-289-5627
TRUSS EQUIPMENT
Klaisler 14' x 46' End Eject Roller Gantry System Klailser 14' Roller Gantry (track mounted) with Hydraulic Roll Lifter & Ride Platform. (10) 4'-8" x 14'-0" Steel & Plastic Top Tables with Pop-up Rollers (for end eject). 208 Volt / 3 Phase. Excludes Finish Roller & Outside Conveyor. $13,900 NOW $12,900 FOB IA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
en
2002 MiTek Tee-Tracker Gantry Featured System: 14' X 73' side-eject, trackless system complete with ten (10) 6' X 14'slotted, 3/4" steel-top tables w/ ejectors, one (1) MiTek Tee-Tracker Gantry head 14' X 24" dia. roller with pendant control, Demag Gmb motor, controls, and drive components with Auto-Lube. System includes dual park stations, (8) powered conveyors, (7) idle conveyors and all available system hardware. 460v/230v, 3ph, 60Hz. OPTIONAL CONFIGURATIONS: Using Tee-Tracker components allow us to configure any system length long or short. Available equipment includes six (6) MiTek Tee-Tracker gantry heads, 60+ Tee-Tracker all steel, slotted-top, side-eject tables, park stations, conveyor rollers, and one (1) 24" diameter final roller x 14' standard throat is available at an additional cost. $49,900 fob NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
1998 Tee-Lok 40' Floor Truss Machine Trackless Roller Gantry with 24" Diameter Roller. Dismantled & Stored Inside Wasserman & Associates 800-382-0329
P
Give us a call and we can quote a system that will work for your operation. Or visit our website to see other production equipment.
d
OPTIONS
The
JobLine
, inc.
800-289-JOBS
Time To Hire? We’re here when you need help! Call 800-289-5627 ext. 1 www.thejobline.com FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
TRUSS EQUIPMENT
Tee-Lok Side-Eject 24" dia Gantry 165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware. System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990
Mitek 14' x 24" Diameter Finish Roller plus 16 Truss Rollers 208 Volt / 3 Phase. 7 Powered Rollers with Stands. 9 Non-Powered Rollers with Stands Wasserman & Associates 800-382-0329
Don’t Forget!
Adverti$er
YOU SAW IT IN THE
September 1st, 2013 #06170 PAGE #15
TRUSS EQUIPMENT
2005 Koskovich Jet-Set 23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990
Klaisler Receiver Arms / Power Conveyors / Idle Conveyors (27) Klaisler Receiver Arms (29) Klaisler Roller Conveyors (33) Klaisler Idle Roller Conveyors (Date of Manufacture: 2003, 2005 & 2006) Items priced according to purchase of (1) lot or subdivided items. Excellent Condition / FOB GA / (Please Call for Pricing & Availability) Salter Associates 770-434-1006 www.salter.com
Integrated Stealth Technology Roof Truss Equipment
IST AUTOMATIC TRUSS STACKER IMPROVE PRODUCTION FROM YOUR ASSEMBLY LINES • • • • • • •
Saves labor and helps reduce injuries Will stack any Truss 16’ to 80’ in length and 14’ in height Standard capacity is 30 trusses Average stacking cycle is 40 seconds Bundle indexes 1-1/2” as each truss is stacked Electric-mechanical controls and drive system operate in all weather Automatic and manual controls are standard
Give us a call and we can quote a system that will work for your operation. Or visit our website to see our other production equipment. 1-517-323-1996 Office | Ed’s cell 1-517-285-4838 | www.integratedstealth.com TRUSS EQUIPMENT
MiTek TK-8 Klincher 60' C-Clamp Systems MiTek TK-8, 20 ton C-clamp style press with 60’ working length floor-mounted jig filtering. Each system includes: support beam, manual trolley, counter balance arm with hydraulic reservoir. Three systems available. Price is per 60’ system. $6,900 each. FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
Alpine Tracked Roof Gantry Side-eject 14’x 118' working length, tracked gantry system with (16) 3/4" thick, plastic topped tables over 1 1/8" OSB, with bottom chord steel plate, 3/4" thick, drilled and tapped at 6” centers. Includes (2) Alpine gantry heads with pendant controls (11) 5" diameter rollers, (1) 8" diameter roller, (11) motors with stands, aisle pads, gantry rail, masts, and panel box for roller conveyors with electric s/o cord and all available system hardware. 480 volt, 3 phase electrical. $29,899 FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1998 MiTek Tracked Gantry 80 foot working length 'x 14' side-eject system includes [10] slotted steel top tables with skate-wheel lift-outs and multiple ejector controls Features MiTek gantry with riding platform and 24" dia. roller. Includes all available system hardware. 15'-10" rail centers. 220v, 3ph electrical. (equipment currently under power, no conveyor or final roller included). Price: $23,950 $19,900 :: FOB MO Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
TRUSS EQUIPMENT
2007 Alpine 15'-6" x 24" Diameter Finish Roller -Model 725 -Variable Speed -240 Volt / 3 Phase Location: BC. Price: $14,500.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Adverti$er
September 1st, 2013 #06170 PAGE #16 WALL PANEL EQUIPMENT
Selling Roof Trusses and Truck Transmissions Website: www.todd-drummond.com Phone: 603-763- 8857 - Email: todd@todd-drummond.com Copyrights © 2013
It looks as though we finally had a respectable year for component sales in the USA this year. Because of this, I am expecting this year’s BCMC trade show in San Antonio, Texas on October 8th to the 10th to have a much better turnout than it has had since the crash. Most vendors are talking about strong sales with many component companies investing in new equipment and expanding their existing manufacturing in some way. I will have a booth, and I hope to see you at the show. Of course, if you do go, you will be able to recognize me by my big brown leather hat that I always wear at the trade show. Now, for the odd title of this article: “Selling Roof Trusses and Truck Transmissions.” Let us assume you are having problems with your truck’s transmission and you need to have it replaced. When you take your car to the local mechanic, do they not tell you the hourly rate for service and that any parts needed to fix your auto is extra? The hourly charge they are billing you is to cover their operating expenses and create a net profit. The cost of the part they are replacing has no bearing on how much the hourly rate is. The cost of the part is an add-on expense you are charged on top of the established hourly rate. Now, what does this have to do with roof truss sales? Bear with me, and keep reading, please. If you were not selling manufactured components, how would you maximize your gross profit for your manufacturing facility? It is quite simple, really. You would rent or lease your facility at the maximum dollar rate per time period. It would be a natural idea to lease at the maximum dollar rate the market would allow, whether on a monthly, weekly, daily, or even per-hour basis. What they are using your facility for and the cost of materials they are using to manufacture their products is irrelevant to you. You want the most you can possibly get based on market conditions for the agreed time the lessee uses your facility. Now, when you sell a component project to your customers, how is this so different from leasing your manufacturing facility? When you manufacture a customer’s project, it is using your facility’s hourly and daily time periods. Most component manufacturers establish the selling price based on the cost of material plus labor cost, and then use some type of multiplier for establishing the total sales price. Material costs of lumber and truss plates are like a new transmission for your truck. What does that mean? Well, you go to your local mechanic and they first establish how long it will take to replace the transmission in your truck, then they add the cost of the new transmission to the bill. They do not use the cost of the transmission, plus the cost of labor, and then mark it up. Why is this? Because the cost of the transmission has nothing to do with how much of the hourly garage time rate the replacement job will consume. Yes, they will mark up the cost of the new transmission, but the cost of the transmission is a separate line item. Now you can see how this applies to selling roof trusses. When you use the cost of material in your pricing formula, you are charging your customer less per hour for your facility’s hourly rate when the material cost drops. Using material cost to establish the margin rate skews the hourly rate up and down depending on the market cost of material. By using a cost markup, any time lumber cost drops, you are giving yourself an hourly pay cut for your company. Now, what can you do to provide a consistent baseline to establish your gross margin markup for each project? Drummond’s pricing method for proper margin rate per time period: Material + Labor Cost + (Dollar Rate * Expected Hours) = Sales Price
NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329
2004 MiTek/PCS Wall Panel Line “E-Series” system includes auto-cycle feature, (2) sub-component tables, (1) 16’ Power Framer with power height adjustment, provides nail-on-the-fly framing that builds from 7’ to 12’ wall heights up to 16’ in length. Workers remain stationary as the wall continuously and automatically moves past (6) high-production nail guns. Framer transitions to Power/Sheathing station with multi-tool, turret bridge, power chain drive and pc control station. Total system length 55’. 460v/60/3, 120v/60/1, air at 100 psi required. Price: $39,990 :: FOB WI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
JobLine.com, inc.
The
Results of using this pricing formula: Higher margin dollars per hour projects than prior sales. Why is this? Watching the gross-margin dollar rate per estimated hour will allow you to recognize the high and low margin dollar-per-hour projects at a glance. You will have a much better understanding of which orders really are worth the effort and which ones you will pass on to your competition. You will know at a glance how much you really will be earning on an hourly basis, so in essence you are giving your company an hourly raise to do business. All of this will lead to greater net profit at the end of the year. Drummond Consulting Service… • Average net profit gain for most clients is 3 to 5 points in net profit. • Lean Manufacturing Best Practices Made Simple and Practical (50% shop & 50% office) • Established Time Standards for Truss Manufacturing (Over 80 different factors to choose from based on equipment types) • Labor Tracking Software (Automated per truss tracking off the build tables!) • 60+ consults, 10th year in consulting service, and 25 years in the truss industry See website for customer testimonials and other helpful information: www.todd-drummond.com.
PHONE: 800-289-5627
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
800-289-JOBS
Time To Hire? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE WALL PANEL EQUIPMENT
WALL PANEL EQUIPMENT
2002 Mango Automated Wall Extruder OEM Reconditioned Price: $39,900 $28,500 :: FOB TN Auto feed wall framer. It has a 16’auto conveyor on each side of the incoming feed system (out feed conveyors are not included). The Mango Automated Wall Extruder is operated using data downloaded from virtually any wall design software in the office. The wall extruder is a fast, safe and efficient way to automate your existing manual wall equipment. The system accurately sets the plate positions in front of the nail guns to ensure that the studs are in the correct position. The studs (or other features that are being assembled) can be placed anywhere, not just on fixed centers. The standard machine is designed to allow for 2 nails in each end of the stud 3 nails for 2x6 wall. Plate sizes can be 2x4 or 2x6 material without need for manual adjustment for nail position or number of nails. Features include: Minimum wall height = 6’8”, Maximum wall height = 12’0, Minimum wall length = 1’0”, Maximum wall length = 16’ . 2 x nail guns required, Able to fire 3.5” stick nails, or coil-feed nails, to suit nail reels, Power: USA / Canada 110 Vac 6 Amp, Air: 100 psi / 8cfm (Machine is disassembled and ready for shipping). $84,990 FOB AB. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Adverti$er
September 1st, 2013 #06170 PAGE #17
2007 Panels Plus 312 Combination Table System Fully Complete wall panel production system includes Panels Plus (P+) SemiAutomated 312 Series Combo Unit allows you to frame and sheath on one table. Builds both 2x4 and 2x6 walls up to 16 foot long and up to 12 foot wall hieght. Framer features dual three-gun tool dollies, with remote push button gun activation, automatic hold-down clamp coded stud locators at 16 inches & 24 inches o.c., and motorized telescoping arms for wall heights from 7'-11” to 12’-4”. Combo table securely clamps wall prior to nailing (or stapling), includes P+ Sheathing Bridge with with Laser Pointer for easy & precise fastening, tilt-beam function for accurate seams, end-stops and manual crank tool bridge with easy, accurate movement. System includes automated cutting and marking with a Lauderdale-Hamilton under-table saw (24" balde), dust collector, paired with a Mango Automation plate marker touch-screen input system for fast accurate material cutting, Panels Plus SubComponent Lay-Up table with pneumatic squaring edge and efficient walk-through design, 10' Infeed & 20' Outfeed Roller Conveyors and two pair P+ 15' skate-wheel conveyors with Stands, Safety Speed Cut H-5 panel saws, P+ Handle-Bar Router, 1 Ton electric hoist with P+ Wall Panel lift. Requires 30 CFM at 120 psi and 120v or 230v, single phase electrical service.
Now $72,500 Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2007 Triad Bridge Nailer and Sheathing Table 2007 Triad Gen II, model PSTT sheathing/ squaring table. Sheathing bridge features: 3" side-shift, laser indicator, tool tilt, dual plate stitcher option, and (16) Max Super Framer nailing tools with mounts. Squaring table is 20' x 12' and builds from 8' minimum to 12' maximum wall heights, includes 12' of conveyors, and all available manuals and hardware. 120 v power and 100 PSI air. $29,490 FOB UT. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
Tell ThemYou Saw it in the COMPONENT MANUFACTURING dverti$er
A
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Adverti$er
September 1st, 2013 #06170 PAGE #18
800-382-0329 www.wasserman-associates.com
2007 Wall Panel Cutting & Assembly Equipment Total Package!
$84,900 FOB Alberta
PHONE: 800-289-5627
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
PANELS PLUS 12' X 16' COMBINATION FRAMING/SHEATHING TABLE -Single Table Wall Panel Assembly System -Remote Fire Tool Dollies with Automatic Down Clamp -3 Tool Mounts per Dolly plus Holster on each side for spare tools -Motorized Panel Bridge with Laser Pointer for easy & precise fastening -Tilt on Panel Bridge -Single button remote tool fire adjacent to hand crank on bridge -Panel Bridge tool spacing on 6" centers with 3" bridge shift -Panel Bridge accommodates nailing or stapling of 4" and 6" walls -Motorized telescoping arms (7'-11" to 12'-4" wall Heights) -Pop-up Skatewheel Conveyor at both sides -Telescope and Conveyor controls at each end of table -Steel Stud Locators at 16" and 24" centers -Adjustable Squaring Stops with Tape Measure -Excludes Nail & Staple Guns -Click on Photo 5 for Literature LAUDERDALE HAMILTON UP-CUT SAW WITH MANGO PLATE MARKER & DUST COLLECTOR -Lauderdale Hamilton 24" Super Chop Up-Cut Saw -Mango Plate Marker with Touch Screen Computer -10' Infeed & 20' Outfeed Roller Conveyor with Stands -General Dust Collector -Add $995 for 12 Month MangoTech Technical Support STEEL COLUMNS & BEAMS FOR FLOOR MOUNTED OVERHEAD HOIST SUPPORT(40' LONG X 24' WIDE X 12' HIGH) 1 TON ELECTRIC HOIST WITH PANELS PLUS WALL PANEL LIFT PANELS PLUS SUB-COMPONENT LAYUP TABLES 2 PA I R - 1 5 ' PA N E L S P L U S SKATEWHEEL CONVEYOR WITH STANDS PANELS PLUS HANDLE BAR ROUTER 2 EACH - SAFETY SPEED CUT MODEL H5 VERTICAL PANEL SAWS Call for Installation & Training Quote in USA or Canada
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Adverti$er
September 1st, 2013 #06170 PAGE #19
Updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com
August Lumber Market Analysis By Keta Kosman Publisher, Madison's Lumber Reporter
August 28, 2013
To the astonishment of all, an actual two-tiered market developed in the first week of August for lumber buyers and sellers. Traders reported that secondary suppliers (reloads, stocking wholesalers, retail yards) were undercutting producer prices, at the sawmills, by $5 mfbm. Perhaps the lumber market will indeed return to more familiar ground as demand recovers and supply becomes more stable!
The regular seasonal slowdown of lumber buying and selling manifested in August, however prices remained generally firm. Consistent volumes were moved as well, providing confidence to traders that when the real seasonal down-time comes, in autumn, solid wood prices might not soften as starkly as in some recent years.
Looking Backwards is OK but not if you want to know where you are going! Subscribe to Madison’s for weekly market analysis and forecasting.
Field inventories remained weak compared to 2004 levels, but there was obviously enough wood available through the supply chain to In western Canada, exporters provide negotiating room for buyers and sellers. Prices on most lumber hit with the 10 per cent softwood and panel commodities improved through July, and at the beginning of lumber tax on shipments headed www.madisonsreport.com August sawmills reported order files out as far as October on some items. to the US starting August 1 While epic wildfires burst to life in various parts of the US west in shifted their focus to Canadian and overseas selling. So August, British Columbia thankfully escaped any meaningful forest fire much so, in fact, that traders in eastern Canada grumbled activity. With cooler nighttime temperatures upon us, the timber supply about the quantity of lower-priced western SPF arriving at of North America’s fibre basket is safe from that threat for likely another rail terminals in southern Ontario during August. year. Lumber producers and timber harvesters in BC currently enjoy no The recently-announced reduction of that tax to 5 restriction on access to the back country, which gives them every ability per cent for September 1 will likely have little effect on to stock up sawmill log yards before the autumn rains come and road volumes of Canadian wood moving across the US border, bans go into effect. as producers in the north are bent on nurturing customers from all regions; be they new or established.
MADISON'S LUMBER REPORTER KEY PRICES WEEK OF 08/23
As more players openly acknowledge improving sales volumes, supply and demand are coming into better balance. Wholesalers and end-users are losing their terror of overstocking on wood then getting mashed with high replacement costs in the future. The fear that lumber and panel commodities could experience serious drops in value seems to be evaporating now that the difficult lessons of the epic US home building downturn are behind us.
A selection of key lumber and panel prices, to be published in this week's issue of Madison's Lumber Reporter:
WSPF KD R/L 2x4 #2&Btr . . . $328 WSPF KD R/L 2x6 #2&Btr . . . $312 WSPF KD R/L 2x8 #2&Btr . . . $318 WSPF KD R/L 2x10 #2&Btr . . . $380 WSPF KD PET 2x4 Studs . . . $310 Douglas Fir green #2&Btr 2x4 . . . $312 Douglas Fir green #2&Btr 2x10 . . . $405 ESPF KD 2x4 8ft Studs . . . . . . . $370 OSB ON 7/16" (C$/1000 sq ft) . . . $223
Keta Kosman - Publisher Madison's Lumber Reporter Madison's Timber Preview Madison's Investment Rx 604 984-6838 www.madisonsreport.com
all prices FOB mill, US$ per thousand board feet *except OSB which is C$ per thousand square feet PHONE: 800-289-5627
Follow us on Twitter! https://twitter.com/ LumberNews
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
September 1st, 2013 #06170 PAGE #20
Don’t Forget! YOU SAW IT IN THE
Wood Truss 765-751-9990 Systems www.woodtrusssystems.com
Adverti$er
TRUCKS
&
TRAILERS
TRUCKS
&
TRAILERS
inc.
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
2000/08 IBS Interior/Exterior Wall Panel Line $63,500 FOB BC
n
late 90's IBS 12'x16' squaring table, two pair 10' accumulation roller conveyors with stands, SSC panel saw, jib crane with a 2000 lb hoist with wall panel lift, (vertical columns not included). Also includes a 2007 Panels Plus handle bar router, two steel material carts. Primary system is 120 volt electrical, 120 psi air/90+ CFM. (NOTE: Some photos are current, some are from previous installation.)
2007 JDH Trussmaster Pole Trailer Features square tube, dual axle, fixed rear and stretches from 25-40 feet. 26,000 GVWR, 15,000 lb. axles. $11,800 FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
e ic io r t P uc ed R
2000/08 IBS Interior/Exterior Wall Panel Line includes a 2000 12'x16' framing table (no tool dollies), 2008 12'x16' sheathing table with multi-tool bridge including plate stitchers, joy stick controls and auto-return, 24 +/Paslode nail guns with tool mounts,
2002 JDH Trussmaster 36'-51' Stretch Roll-Off Trailer Roll-off trailer stretches from 36 to 51 feet. Features anti-lock brakes, tongue connection, sliding tandem axle, locking, controllable rollers and hydraulic lift neck, maintained well during its service life, tires good to fair. $12,900 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2008 40' Gooseneck Roll-Off Trailer 1999 Sterling Tractor 1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Wood Truss Systems inc.
Location: NC Price: $11,900.00 NOW $10,900 -40' Trailer hauls up to 60' Trusses -Tandem 7,000 Lb Axles Wasserman & Associates 800-382-0329 www.wassermanassociates.com
765-751-9990 www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
TRUCKS
&
TRAILERS
Lakeside 30'- 45' Mini Stretch Roll Off Trailer Price: $7,890 :: FOB IN Condition: Good Category: Trailers and Rolling Stock Description: Single axle trailer, features anti-lock brakes, tongue connection, locking, controllable rollers and hydraulic lift neck. Stretches from 30’ to 45’. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
TRUCKS
&
TRAILERS
2007 Hotshot 20' Roll-Off Trailer Location: CA Price: $7,900.00 Attributes: Details: [Updated: 6/28/2013] -Hydraulic Tilt Bed & Winch -Locking Rollers -Tandem 7,000 Lb Axles Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Combining the qualities and expertise you should expect from an industry supplier
1999 T-800 Kenworth Boom Truck Price: $79,900 :: FOB WV PENDING Condition: As is, Where is 1999 T-800 Kenworth with 475 Cat 8-speed, 20,000 lb. front, 44,000 lb. rear, and air ride double frame, approx. 421k miles, HB transmission and good tires. Features model RK-24001 Palfinger boom with hydraulic jib to 62 ft., continuous rotation overload protection system, and 6-function, fully proportional, hand-held radio remote control with wide belt strap.
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
TRUCKS
&
ANUFACTURING
TRAILERS
Don’t Forget! YOU SAW IT IN THE
TRUCKS
&
Adverti$er
TRAILERS
Price Reduction
1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2000 JDH Trussmaster 36’-51’ Stretch Roll-Off Trailer Hydraulic Lift Sliding Tandems Dual Rollers Price: $8,900.00 NOW $7,900 (FOB NY) Wasserman & Associates 800-382-0329 www.wassermanassociates.com
2005 32' Precision Goose Neck Trailer 32 foot long trailer featuring anti-lock brakes, dual-axle, locking rollers, fifth wheel connection and tilt-bed. Price: $13,995 :: FOB BC. Condition: Good Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
September 1st, 2013 #06170 PAGE #21
Custom Tri-Axle Truss Trailer (Qty: 4) Price: $11,990 each :: FOB WA Custom built, peak-up truss trailers, with belt winches, three (3) 7,000 lb. axles, stake pockets, 1/4" thick steel wheel fenders, moveable vertical light bars, electric over hydraulic brakes. Telescoping trailer tongue extends to 11 feet. Wood Truss Systems 765-751-9990 MISC.
800-382-0329
2006 Omni Miser Automated Material Picking System $89,000 FOB SD
-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000! Option to Omni Miser Picking System. -The standard NEW WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!
Alpine Lumber Carousel HD carousel feed system with 7 stations handles material to 16’, always housed inside, includes toggle controls and 10 HP motor to power systems hydraulic power unit. $4,990 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
IBS Sub-Component Nailer Clamps lumber up to 15" wide x 13" high. All clamping positions are adjustable. Can nail headers from both sides. End stop assures pieces are flush. 120 Volt / 1 Phase. Checked and sold in working condition. Add $450 to remove casters & add used 5' infeed/outfeed roller conveyor with stands. Add $800 for nail gun tool mounts & trigger pulls (buyer to furnish 4 nail guns). $4,750 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
M ACdverti$er OMPONENT
ANUFACTURING
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
Click for WoodRunner Details: http://apexmw.com/ MISC.
2013 SL Laser 60' System SL Laser 3-head laser projection system, model ProDirector 6, allows for quick and accurate laser guided setups for wall panel, floor panel or roof trusses. Compatible with virtually any commercial design software. Consists of three (3) green laser heads for 21' x 63' projection area (@ 15' working ht.), includes system computer, operator remote control, and all available cables and accessories. System was purchased in March of 2013, not installed until June of 2013 and has logged very few hours since installation. Factory installation and training available from SL for an additional fee. (Sold for over $81,000 new). $70,990 FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
READ//SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
MISC.
2006 IBS A4 Sub-Component Nailer The IBS component nailer assembles all common building components. Production and configuration changes are fast and easy with one man operation. Material capacities up to 15" wide and 13" high. Clamping force of 500 lbs. vertical and 1,300 lbs. horizontal. End squaring stop raises to ensure a flush start and retracts automatically after the first nail is fired. Nails are driven at a 15 degree angle for greater holding power. Nailers are individually safety controlled for worker protection. 120 volt, single phase power and 1/2 " air feed line, nail guns not included, one owner, low-hours. Price: $9,595 :: FOB NJ. Condition: Good. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
MISC.
September 1st, 2013 #06170 PAGE #22
Don’t Forget! YOU SAW IT IN THE MISC.
Adverti$er MISC.
MISC.
Wood Truss Systems
inc.
MANUFACTURERS’ REPRESENTATIVES
2005 Atlas Copco GA18 Rotary Screw Compressor Atlas Copco, model GA18, 25 HP rotary screw compressor with integrated air dryer and tank. Unit features oil injected lubrication, air cooled, digital display, 3,600 RPM motor, free air 99 CFM and maximum final pressure 132 PSI. 480 volt, 3 phase electrical. $7,990 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Refurbished 2005 Hain 20Ft. Measuring System 2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.
$22,677 FOB FL | AS NEW
Basic Automation Handlebar Router with Bits HD 2400 RPM Porter-Cable motor for cutting sheathing material, on/off switch at end of handlebars, cast frame and motor mount. 120v, 1 phase, 13 amp. 122” long X 28” wide. Quantity of four (4) available at this location. Priced per unit. Price: $1,190 ea. :: FOB IL. Condition: Good. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1999 Holz-Her Accura "S" 14' Beam Saw Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329
2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com Door & Stair
2007 Norfield 3800L Door Lite Machine -Process Wood, Metal & Fiberglass Doors -Door Lite Cutting -Lock Boring -Latch Drilling $15,000 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com
765-751-9990 www.woodtrusssystems.com Norfield 1020 Double-End Trim Saw
MMC 5-Arm Infeed Deck Handles lumber from 4’ to 20’ and features 5 rails/pedestals, foot pedal controls, safety-guarded drive chain, heavy-duty steel I-beam and tubing construction and adjustable swivel base feet. Foot print +/14 x 20’. Price: $5,500 $4,500 :: FOB TN Wood Truss Systems 765-751-9990
PHONE: 800-289-5627
2002 TeeLok Splicer (Qty:2) Quantity of two (2) TeeLok splicers. Splices 2" x 4" lumber, minimum length 17". Maximum plate size of 3" x 12". Includes both foot pedal and dual, push button controls. Plate storage bin, 5 HP motor and 20 gallon hydraulic reservoir. Price is per each. 230 volt, 3 phase electrical. 120 PSI air required. Price: $3,290 ea. :: FOB NC Condition: Good. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2007 MiTek Ready Feed Live Deck Auto-Feed live deck for component saw. 14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
Norfield 1020 Double-End Trim Saw - Miter cuts or square cuts can be compound/beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982
Page 23
Component Manufacturing Advertiser
September 1st, 2013
M ACdverti$er OMPONENT
ANUFACTURING
JobLine.com, inc.
The
800-289-JOBS
email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL! Truss Designer - Intermediate Location: South Small but growing truss plant producing single family residential roof trusses is looking to hire 1-2 intermediate level truss designers. The ideal candidate will have MiTek Sapphire experience, have WTCA I or II rating, or be ranked intermediate or above by JobLine. Compensation: $45-55k+- based on experience. Relocation assistance is available. ID: J10568 Senior Designer- Truss Location: South Products include floor and roof trusses, I-Joists, wall panels, MiTek. Panel experience is a plus! JobLine Senior Designer rating is preferred. $50-70k DOE. Thom's Notes: One of my "A" list employers, great benefits, competitive compensation. When I place someone there, they stick! Very tight specifications for this employer. Relocation assistance is available. ID: J10582
PHONE: 800-289-5627
September 1st, 2013 #06170 PAGE #24
Don’t Forget! YOU SAW IT IN THE
Adverti$er
Hiring Zone - Available jobs Senior Designer - Truss/EWP/MF • Calls on construction management Location: Texas representatives such as project manJobLine Senior Designer certification is agers, estimators and field personnel Required. Skills required include MiTek at construction and building related software, no exceptions, math skills, and establishments. Provides the active blueprint reading. Components include: or prospective client with the type floor trusses, roof trusses, and framing and scope of products or services components. Past Design Managers who offered. are interested in a Senior Designer posi• Works with design professionals tion are urged to apply. Step back candisuch as architects and structural endates will be considered if compensation gineers to provide working solutions is comparable. that involve products and services offered. Senior Level Compensation Package: • During initial customer interview Base from $20-30hr+ depending upon "qualifies" prospective job order by experience and ability (Plus OT. Averdefining the following items: what age 45 hours a week). Benefits include: type of building, customer reputaMedical, Dental, Vision, 401K and/or tion, quality of plans and soundness other retirement programs, profit sharing, of engineering specifications, credit and detailed benefits plan - see Company rating and project needs (types of Profile. Relocation is acceptable with trusses, etc.). reasonable expenses paid and open to ne• Reviews blueprints, plans, and other gotiation. (Corporate relocation packages customer documents to develop and available for candidates from CA, AZ, NV prepare projected materials used and and other states, ask for details and states production costs from client's use of included) product and forwards specifications ID: J10506 to the estimating department for pricing. Outside Sales - Truss • Draws up initial proposal for Single & Multi-Family customer consideration. Verifies Location: Northeast acceptance and forwards information This Single & Multi-Family Truss Manuto Engineering/Design for complete facturer is looking for Seasoned Outside layout and completion of cutting Sales Reps who are self starters, has an out bills to initiate production. going personality, and is capable in preProvides technical services to clients senting himself or herself in a professional • relating to use, operation, and mainmanner. Must be comfortable and be able tenance of equipment. to communicate effectively with contacts • Draws up sales or service contract including framers, builders, developers, for products or services. and architects. Must be knowledgeable in Provides technical training to emapplying trusses and building components • ployees of customer. to single and multi-family projects and Spends approximately 15 to 25 hours have current, on-going client relationships • calling on current and prospective in your specific market area. customers, including visiting job sites when necessary. SUMMARY: Sells fabricated roof and • Responsible for developing and floor trusses and components and related maintaining customer accounts, supplies or services. generating approximately 4.0 million
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
•
dollars in sales annually. Performs other job-related duties or special projects as assigned
KNOWLEDGE SKILLS AND ABILITIES • •
• •
Excellent verbal and written communication skills Strong understanding of customer and market dynamics and requirements Information management; organizing and planning Knowledge of computers and relevant software applications, primarily Microsoft Office Products and Outlook
EDUCATION AND EXPERIENCE Bachelor's degree from four-year college or university; or two to four years related experience and/or training in sales or equivalent combination of education and experience required. Prefer 2-5 years lumber/truss/construction industry experience in a contractor market sales role. RELOCATION: None. Must be from the MD/DC/NY/PA/NJ market with a client base. ID: J10565
Estimator/Takeoff EWP/Beams Location: Upper Midwest This company produces architectural beams and trusses, arches, and timber frames. The ideal candidate will have experience in takoff and estimating, engineered wood products, blueprint reading, specifications, and code compliance. Compensation based on ability ID: J10544
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
September 1st, 2013 #06170 PAGE #25
Don’t Forget! YOU SAW IT IN THE
Adverti$er
Hiring Zone - Available jobs Senior Designer- Truss Location: South Products include floor and roof trusses, and markets include 60% single family and 40% multi family so your experience needs to be strong in these areas. MiTek. Panel experience is a plus! Thom's Notes: One of my "A" list employers, great benefits, competitive compensation. When I place someone there, they stick! Very tight specifications for this employer. ID: J10545
Senior Designer - Truss/ Panel/EWP Location: Canada Responsibilities: Design of roof and floor systems using wood trusses, i-joists and pre-engineered wood beams for residential, commercial and agricultural construction. Prepare drawings for manufacturing and erecting wood building components. Provide technical support to customers, production and sales staff. Qualifications: Diploma from a recognized architectural, civil or construction engineering technology program, degree in civil engineering or previous experience designing roofs and/or floor systems using engineered wood products. Compensation: $60-80k DOE Locations: US Citizens will need at least 5 years of verifiable experience and a minimum of an Associates degree in a design, cad or engineering field related to truss or building construction field. Possibility that employer will obtain an LMO so apply if you have a degree or not. ID: J10383 Production Manager - Truss Location: South Production Manager with 4+ years truss production management or supervision needed at a $3-5M truss plant. 95% Single family custom and tract. Must be hands on, good at organization, and building a production team. Crew of 25-30 per shift, with 1-2-3 shifts depending on demand. Computer literate, able to batch to saws, plan production schedule, flow, and keep tables organized to maximize output. Responsible for interviewing, hiring, disciplining, and terminating as required. Compensation: $50-60k+- plus bonus based on performance. Thom's Notes: This is not rural or city but mid-sized city that is within an our of large cities and beaches. The ideal candidate will have come up through production and have a complete understanding of all positions from the saw shop to the yard. ID: J10566 PHONE: 800-289-5627
Senior Estimator - Truss/EWP/MF Location: Texas Primary duties include estimating, job books, bid creation and working closely with Sales, Customers, Architects, Engineers, and Code Officials as well as Design, Production and internal departments. Must have excellent communications skills Truss design skills are a strong plus. JobLine Senior Designer certification is preferred. Skills required include MiTek software, (Sapphire preferred) will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, and framing components. Markets must include multi family. Compensation: Base from $20-28hr + OT, averaging 45 hrs, depending upon experience and ability. Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs, profit sharing, and detailed benefits plan - see Company Profile. Relocation is acceptable with reasonable expenses paid and open to negotiation. ID: J10578
Senior Designer - Truss Location: Southeast MiTek Sapphire and AutoCAD software experience preferred. JobLine certified Senior Designer rating strongly preferred. Employment history must demonstrate progressive advancement, stability, and strong skills in multi family design. No job hoppers. We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. Priority is multifamily and commercial experience.
Senior Designer - Truss/EWP/MF Location: Texas JobLine Senior Designer certification is Required. Skills required include MiTek software, no exceptions, math skills, and blueprint reading. Components include: floor trusses, roof trusses, and framing components. Past Design Managers who are interested in a Senior Designer position are urged to apply. Step back candidates will be considered if compensation is comparable. Senior Level Compensation Package: Base from $20-30hr+ depending upon experience and ability (Plus OT. Average 45 hours a week). Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs, profit sharing, and detailed benefits plan - see Company Profile. Relocation is acceptable with reasonable expenses paid and open to negotiation. (Corporate relocation packages available for candidates from CA, AZ, NV and other states, ask for details and states included) ID: J10506
Truss Designer - Intermediate Location: South Small but growing truss plant producing single family residential roof trusses is looking to hire 1-2 intermediate level truss designers. The ideal candidate will have MiTek Sapphire experience, have WTCA I or II rating, or be ranked intermediate or above by JobLine. Compensation: $45-55k+- based on experience. Relocation assistance is available. ID: J10568
Outside Sales - Truss/Multifamily Compensation: $20-27hr. plus OT, 45 Location: Midwest hrs+. Full benefits program. Relocation UPDATE 8/28/2013! One of our clients assistance is negotiable. Candidates from in the Midwest is looking for a seasoned the Southeast are preferred. outside sales specialist with experience ID: J10537 selling trusses to lumber yards. They are looking for someone with 4+ years selling single and multifamily projects and at least a working understanding of the Senior Designer - Truss estimating process using MiTek Sapphire Location: North Carolina or equal. They have an estimating deMiTek Sapphire and AutoCAD software partment but want the sales rep to know experience preferred. JobLine certified how to bring the project to estimating. Senior Designer rating strongly preferred. They will pay additional for doing some Employment history must demonstrate or all of the estimating up front. These progressive advancement, stability, and details are still being developed and may strong skills in multi family design. No not be something they communicate to job hoppers. We have specific instrucus so please inquire to be considered. tions on what type of candidate they will We will only consider candidates with accept, and we will be closely screening the experience mentioned above and a candidates for this opportunity. Priority is career that is primarily sales focused. multifamily and commercial experience. Relocation assistance will be considered for candidates living in the central US. Compensation: $20-29hr. plus OT, 45 Candidates on the coasts may not be conhrs+. Full benefits program. Relocation sidered unless they have prior Midwest assistance is negotiable. Candidates from experience. the Southeast are preferred. ID: J10542 ID: J10571 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
JobLine.com, inc.
The
800-289-JOBS
email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
Catch us on
thejobline.com
COMPONENT MANUFACTURING dverti$er
A
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
Immediate Search Production Manager - Truss Location: Midwest
Immediate Plant Manager Opportunity This employer needs a hands on plant manager who can take a $2M plant to $4m. Current efforts are not meeting demand, with improvements needed in volume, cots, and quality. The idea candidate will have first hand knowledge with all phases of production as well as the ability to coordinate design, delivery, customer service and inventory management. Specific needs are in implementing systems and refining equipment utilization to maximize efficiency. The focus of this job is production, but attention to managing work flow through design and approvals is also needed. Current efforts lack urgency and focus. This is a turn around opportunity. Compensation: $70-80K depending on experience and performance. ID: J10569 FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Hiring Zone - Available jobs
JobLine.com, inc.
The
800-289-JOBS
email: thom@thejobline.com or call Thomas McAnally for Personalized Service 800-289-5627 x 1 STRICTLY CONFIDENTIAL! Senior Designer - Truss Location: Southeast MiTek Sapphire and AutoCAD software experience preferred. JobLine certified Senior Designer rating strongly preferred. Employment history must demonstrate progressive advancement, stability, and strong skills in multi family design. No job hoppers. We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. Priority is multifamily and commercial experience. Compensation: $20-27hr. plus OT, 45 hrs+. Full benefits program. Relocation assistance is negotiable. Candidates from the Southeast are preferred. ID: J10537 Senior Designer - Truss/Multifamily Location: Mid-Atlantic This is not our typical Senior Designer job opportunity. "A" list employer, very stable, great benefits. MiTek software experience preferred. JobLine certified Senior Designer rating strongly preferred. Employment history must demonstrate progressive advancement, stability, and strong skills in multi family design. No job hoppers. We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. Priority is multifamily and commercial experience. Compensation: Senior Designers can make $65-80's+. Reviews are annual and your ability and value will be rewarded. Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs, profit sharing, and detailed benefits plan - see Company Profile. Relocation is acceptable and expenses are open to negotiation for the right candidate. The lower your relocation cost are, the better. Other considerations: a Non-Smoking facility, and EOE (Equal Opportunity Employer). ID: J10575 PHONE: 800-289-5627
new equipment showcase
Design Manager - Truss Location: South Small but growing truss plant, producing single family residential roof trusses needs to hire a working Design Manager/Supervisor. Duties include supervising 2-4 designers, designing as time allows, customer service, and problem solving. The ideal candidate will have MiTek Sapphire experience, be a JobLine Certified Senior Designer or have WTCA III rating.
New! Roll Splicer
Compensation: $55-60k+- based on experience. Relocation assistance is available. ID: J10567 Designer - Truss Multifamily/Single family Location: Colorado MiTek experienced Senior Roof and Floor Truss Designer with Multifamily experience needed. The ideal candidate will have a strong MiTek (Sapphire preferred) background and be very experienced in high end single family and multifamily projects from town homes to large apartment complexes. The company embraces 6 Sigma and a LEAN manufacturing philosophy. Candidates who are team and customer service oriented are urged to apply. There are two positions so bring someone you like to work with! Compensation: $50-60's+ ID: J10535 Software Technical Support - Regional Location: Texas/Southeast A position is open for a Truss Software Technical Support Specialist out of the DFW Texas region. This position will be based in Texas and cover the territory of the South Eastern US. Job Description: The Truss Software Technical Support Specialist is an integral position to the Company's sales force. This job requires the creation and maintenance of good relationships with customers such as Truss and Component Manufacturers as well as other users of Truss Software. Essential duties include identifying opportunities, understanding competitive trade-offs, and working with the Territory Manager and other sales force team members to provide "No-equal" focused knowledge and support to customers. The Truss Software Technical Support Specialist works daily in the territory and creates his or her own travel/work schedule; therefore, this job requires a strong ability to self-manage projects and tasks, work independently and take initiative. This job also requires teamwork, punctuality, attendance and reliability due to the position's key participation with other company team members and most importantly, our customers. Positive representation for the Company at industry association is a necessary responsibility.
New! Porta Field Press
Features: • Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber • (3 to 4) second align, roll, eject, cycle time • (2) recessed / simutaneous activation required / saftey controls • Guarded motor and sprockets • 3 HP heavy duty Sumitomo brand electric motor • Air operated / bearing mounted / solid steel hold down rollers • Both top and bottom bearings are adjustable with single crank • Anti-abrasible resistant steel wear slide plate in the splice area
Features: • Presses roof and floor trusses • 4 x 4 " p l a t e n • 5 ton, 1 1/8 dia Cylinder • 5 ton, C-Clamp-Weight 35 lbs • 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs • 10,000 psi 10' length hose • Simple toggle switch operation • Magnets hold connector plates while moving press unit into place
Call 770-434-1006 For Details Salter & Associates www.salter.com
Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com
Desired Qualifications: • College degree preferred with an emphasis in business or marketing, and 4-5 years of job experience •
Past job-related experience in building components and design software required
•
Must be an ethical, self-disciplined and reliable team player
•
Excellent communication and interpersonal skills
•
Excellent driving record
•
Willingness to travel - overnight travel is required Must reside in the territory Continued next column
• Continued next column
Adverti$er
September 1st, 2013 #06170 PAGE #26
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
Relocation: may be negotiated for a qualified candidate. ID: J10560 Designer - Truss/MiTek/Multifamily Location: Texas JobLine Senior Designer ranking or WTCA III certification, and MiTek software experience (Sapphire preferred) required for this position. Prefer someone with commercial and multifamily and having wall panel experience is a plus. Bring your friends and earn a signing bonus. $45-75k+- to start, relocation assistance negotiable. Excellent benefits. ID: J10480
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
September 1st, 2013 #06170 PAGE #27
Don’t Forget! YOU SAW IT IN THE
Hiring Zone
Adverti$er
new equipment showcase
Designer - Truss/Multifamily Location: Colorado MiTek experienced Senior Roof and Floor Truss Designer with Multifamily experience needed. The ideal candidate will have a strong MiTek background and be very experienced in multifamily projects from town homes to large apartment complexes. Compensation: $50-60k+ Txt: J10535 to 406-210-1226 or call 800-289-5627 x1
Operations Manager Truss/Lumber Location: Central Canada Responsible for managing a truss production crew of 40-50, lumber yard crew of 20, plus truck drivers at a mostly contractor yard. LEAN or continual process improvement experience is a plus. 4 year business or management degree required for all US candidates. High school diploma required for Canadian candidates. Candidates with class 5 (Canadian commercial) drivers license, fork lift certification, and prior management of crews in the 80-100+ range including multiple shifts are preferred. Salary (plus profit sharing after 1 year). Please inquire for more information. ID: J10525
Designer - Truss Location: Midwest Components include: floor trusses, roof trusses, EWP, and hardware. Markets include tract homes, single family, single family custom, and multi family. Experience required: 2+ years experience in this position. Skills required include Alpine software, will consider equal brand experience, math skills, and blueprint reading. Work Schedule: average 45-50 hours a week. The ideal candidatae will be from the Midwest. Compensation Hourly, plus overtime, $55k+- depending upon experience. Benefits include: Medical, Ira, and/or other retirement programs, and detailed benefits plan - see Company Profile. Relocation is open to negotiation. Other considerations include EOE (Equal Opportunity Employer). Thom's Notes: I am looking for someone who is willing to make a long term commitment, including moving their family (if). Must be a team player. Must be people oriented, and have a proven track record. Close attention will be paid to where you are, and where you come from. Not likely a good fit for life long Florida candidates. Gets cold in the winter... If you haven't heard or said "Think Snow" forget it. Great cost of living, a family oriented community with great schools. Txt: J10500 to 406-210-1226 or call 800-289-5627 x1 PHONE: 800-289-5627
800-382-0329
NEW Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada. Advantages: -Reduce Waste -Positive Ecological Impact -Produce Straight Material
$79,900 FOB MO
www.wasserman-associates.com Hiring Zone - Available Jobs Outside Sales - Truss/Multifamily Location: Midwest Details: Just In! The details are not all in for this position but we wanted to get it out to our network as fast as possible. One of our clients in the Midwest is looking for a seasoned multifamily outside sales specialist. They are looking for someone with 4+ years selling multifamily projects and at least a working understanding of the estimating process using MiTek Sapphire or equal. They have an estimating department but want the sales rep to know how to bring the project to estimating. They will pay additional for doing some or all of the estimating up front. These details are still being developed and may not be something they communicate to us so please inquire to be considered. We will only consider candidates with the experience mentioned above and a career that is primarily sales focused. Relocation assistance will be considered for candidates living in the central US. Candidates on the coasts may not be considered unless they have prior Midwest experience. ID: J10542
Design Manager/PE CET, AScT PE, CET, AScT Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities.. The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family. Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region. Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here. Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program.
Designer - Truss Texas Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include supervising and checking others work and customer service. Skills required include MiTek software (Sapphire preferred), will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, and framing components.
Canadian CET or AScT, or Degreed Architectural or Civil Engineer preferred. Detailed job description is available. Txt ID: 10486 to 406-210-1226
Thom's Notes: Our specifications for this opening are detailed, but we can't put much on line. Strong math skills, ability to deal with multiple projects, self starter, motivated, thinking outside of the box. After proving yourself, compensation is some of the best in the industry. I am looking for someone with 4+ years experience. ID: J10536
@JobLine READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
Compensation: Base from $50's to $60's+ depending upon experience and ability. Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs, profit sharing, and detailed benefits plan - see Company Profile. Relocation is acceptable with reasonable expenses paid and open to negotiation.
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
JobLine.com, inc.
The
800-289-JOBS
Time To Hire? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
Candidates seeking jobs: theJobLine.com, Inc. The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries. A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. To be considered, every candidate must create and maintain a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time. You can also specify your job, location, and compensation goals. Our Recruiters are personally committed to helping you find opportunities that fit your goals.
To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab. PHONE: 800-289-5627
Don’t Forget! YOU SAW IT IN THE
Adverti$er
Hiring Zone - Available Candidates Designer/Manager - Truss/Log/Modular Timber truss production and delivery. ProRelocation: SC, NC duction management, Facilities ManageTruss Design Experience: Used Mitek ment, Maintenance Management, Master software to design very complex roof and Production Scheduling, Quality Control, floor designs for ocean front properties Safety, Hiring/Firing, Discipline, Human to withstand 130 plus mph wind zone per Resources, Purchasing (lumber, plates, code requirements. Used 20/20 engineerhardware, LGS and accessories, EWP, ing software to produce the plant shop etc.), delivery, and others as needed. drawings. Produced all files for CNC ID: C12001 equipment to produce product. Designed Production Manager/Supervisor structural beams with wood works Relocation: USA - ALL States software to code compliance with in the deflection limits. 30 years production management experience. Manufacturing of Floor & Roof Prior Modular experience: Create electriTrusses for Home,Business,Apartments,1 cal schematics and diagrams for the plant Supervised up to 20 People. Responsible shop drawings and state approvals for for quality control and production flow. NEC code compliance for each custom Handled production scheduling and met home built which was sealed by a third demanding production deadlines. Ensured party inspection agency engineer and the orders were processed on time. This canstate. Create cut sheets with electrical didate came from production. Prior posiholes that reflect the approved circuitry tions as team leader, saw operator, forklift and panel layout per NEC requirements. driver. Helps set tables up for building, Create all plumbing riser distribution supervised employees and trained them in plans cold hot and drainage per the proper safety procedures. international plumbing code and plant ID: C12053 shop drawings. Create custom hinged Designer - Truss/Beam/EWP/Panel roof systems for the plant and produced Relocation: AZ, NM, OK, TX approved shop drawings. Create floor plan elevations and section details required per As Designer: state and work with the local and third - design roof and floor truss systems party building officials to create a quality - design floor systems using EWP code compliance product. Create new - software experience with MiTek, BC product and renderings for the sales team Calc, and LP Wood E Design and for marketing. Worked with Barlow - create detailed placement diagrams engineering and Third party inspection - estimated and designed roof/floor trusses agency HWC on plan approval revisions using wood trusses,LVL, Glulam, and and state submittals LiteSteel Beam products ID: C11687 - specified loading for appropriate site Production/Plant/General Manager locations and verified deflections for Truss/Panel/LGS/Wood serviceability Relocation: AL, AR, FL, GA, LA, MS, TN, USA - South This candidate came up from production. Prior experience as a builder and sawyer. My objective is to gain a position as a pro- ID: C12051 duction/plant manager with a professional, Design/Manager winning organization where I can utilize LGS/CFS Truss/Panel my years of experience to assist in the Relocation: USA - ALL States continued success and growth of the company. I have a strong desire to be a part Design Technician. Design of CFS/ a great team that has a clear vision and LGS, Cold Formed Steel Trusses. CFS/ mission for their stockholders, customers, LGS Wall Panel Design and Estimating. employees, and for the future. I welcome Software: Aegis, AutoCAD, Excel, Word, the opportunity for advancement and Access, CRM. promotion, and am always ready to accept ID: C12042 new responsibilities. I have been involved Remote Designer in the rapid growth of a small truss plant, Truss/Panel/EWP a new LGS truss and panel production Relocation: Remote Only facility, and timber truss production, with responsibility for hiring/training/managDesigner - Estimator - Inside Sales Priing employees at every stage. In addition mary duties: design and layout. Secondary to production management, I also have duties: customer service and inside sales. extensive experience in purchasing, inven- Software used: Alpine, MiTek, TJ Expert, tory control, quality control and delivery. I and AutoCAD. Component experience am "long-term" oriented, having been with includes floor trusses, roof trusses, wall my current employer 18 years. I am look- panels, EWP, and complete framing packing for the chance to grow and advance age. Market experience includes single within the same company, depending on family, single family custom, light commy performance and abilities. mercial, and agriculture. ID: C12050 As Plant Manager: Oversee all areas in wood truss, LGS truss, LGS wall panel, READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
September 1st, 2013 #06170 PAGE #28 GM/DM/SD/OS Truss/Wood/LGS/Installed Relocation: Canada - Eastern, Canada Western/Central, USA - Northwest, USA - Southwest, USA - Western Developed and managed sales and sales staff in Arizona, California and Nevada with annual sale of $15,000,000.00 Developed trained and managed estimating, designed, engineering staff and trained design manager. Developed trained and managed production staff and trained production manager, peak production 100,000 BF/Day. Target markets custom homes, tract homes, multi-family, hotel and motel, warehouse, strip malls, military. Increase line of credit from $300,000.00 to 1,200,000.00 is six months from First Community Financial. Developed accurate production time and motion labor tracking comparing daily budget to actual. Started software development (Job Tract) in 1988 for Bidding, Sales, Estimating, Work Orders, Job Costing, Tasks Job Tract on a monthly basis tracked all direct operations costs and units plus or minus 1.5 % of accounting. Created incentives for Sale, Design and Engineering staff who effective all acted like owners of the company. Created product usage and educations material. (See Attached Specification Book) Created companies training manual for all employment positions. Implemented processes and systems that improved quality and productivity. Eliminate waste of time, money, materials, energy, and other commodities. Implemented efficient and more profitable business practices. Reduced costs utilizing new technologies ID: C12012 Senior Designer/Design Manager Truss/Panel Relocation: Alberta, Ontario, Canada Eastern, USA - South, USA - Southwest 11 years truss experience. As Design Manager, implementing Lean Design with wood minimization within individual designs. All management responsibilities for team of 10 designers including hiring/ firing, efficient use of resources, resource planning and distribution. Co-ordination of design with Sales force and high client contact. Initially a framer, the candidate started as an entry level trainee and advanced to design management. Software: MiTek, T-Lok. ID: C11489 ATTENTION EMPLOYERS We have over 1,000 registered Industry Professionals. All Job Searches are not public! We can search behind the scenes to find the right candidate for your opportunity. See what I can do for you! Thomas McAnally
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Adverti$er
Design/Management/Sales - Truss
September 1st, 2013 #06170 PAGE #29
Hiring Zone - Available Candidates The Designer/Optimizer/Inside Sales Plant/Location/General Manager Truss 19 years' experience in CAD engineered .com, inc. Truss/EWP/I-Joist Candidate Overview: truss designs and layouts to construction Started in Production, advanced to Truss contractors for residential and commercial Design and Design Management. I was Designer - Multi-family. 15 Years truss builders which includes interaction with moved to position of Production Manager experience. Primary duties: design, architects and engineers on a daily basis and then Assistant Plant Manager. I was layout, optimization, cutting/production I computed load and grade requirements documents, and takeoff. Secondary duties: transfered to another location as GM. and material stress factors to determine checking others work, scheduling, repairs, Managed on site reconstruction of the design specifications based on customers entire truss production department to a new customer service, inside sales, software structural design needs. As Truss Design facility. Manage all aspects of the operation, maintenance, network administration, Manager I provided CAD engineered including satellite design office. Oversaw training, and filling in for the design truss designs and layouts to construction manager as needed. Software used: MiTek design functions, production operations, contractors for residential and comsales & marketing. Main focus was financial and AutoCAD. Component experience mercial buildings which also included responsibility and P&L management. includes floor trusses, roof trusses, and interaction with architects and engineers. Performed annual financial budgets and EWP. Market experience includes tract, Additionally, I computed load and grade single family, single family custom, multi- market forecast. requirements and material stress factors to family, and light commercial. My volume determine design specifications based on was varied depending on projects. WTCA Recruited to supervise all area of the customers structural design needs. Alpine engineered truss division for a leading I & II and some MiTek software experience. I We’re here when you need help! lumber building material supplier with worked for a small plant during my career visit: www.thejobline.com multiple offices. Extensive travel, P&L Relocation: FL, GA, NC, SC and wore many hats, drove trucks, ran email: mail@thejobline.com responsibility, administrative supervision, ID: C11477 production, whatever it took. At larger sales & marketing, production. Staff size Designer - Truss/I-Joist or call Thomas McAnally plants, I trained designers and provided was 5 direct reports, total employees for Personalized Service customer service in addition to Design combined of all location averaged 60 - 80. 15 Years design experience, 15 using MiManagement. STRICTLY CONFIDENTIAL! Total rebuilt this operation from a total Tek. Truss and I-Joist. Will self relocate. manual operation to current modernization How to Hire from: Relocation: USA - ALL States including computerized cutting equipment Compensation: $45-50k ID: C11688 theJobLine.com, Inc. to up to date design facilities. Due to local labor difficulties I had to hire from different Relocation: AL, AZ, AR, USA - Eastern, The JobLine.com is a OMPONENT ANUFACTURING FL, IL, KY, LA, MI, NV, PA, USA states and countries. Relocation: AB, BC, Canada - Eastern, contingency search firm. No fee South, SC, USA - Southwest, TN, TX, S S B C ,E W P M I Canada - Western/Central, CT, DE, GA, KY, is due unless you hire or otherwise VA, WV, USA - Western, WI ME, MB, MD, MA, NH, NY, NC, ND, ON, engage a candidate that we present. ID: C11212 OR, PA, QB, RI, SK, SC, TN, TX, VT, VA, new equipment showcase As an advocate for the WA, DC, WV, WI Txt: C11583 to 406-210-1226 employer, we screen candidates to or call 800-289-5627 x1
JobLine
800-289-JOBS
Time To Hire?
C M dverti$er
A
ERVING THE TRUCTURAL UILDING OMPONENTS
NGINEERED
OOD RODUCTS AND
ILLWORK NDUSTRY
Wood Truss Systems
inc.
765-751-9990
www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
M ACdverti$er OMPONENT
ANUFACTURING
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
General Manager - Truss/Panel
Tired of service agreements? We have been associated with selling lasers in the wood component industry for over 20 years, dating back to the pioneering truss company in Maple, Ontario. We are big believers in laser projection and have sold systems new and used in the USA, Canada, Australia, and China. In our experience we can easily say that S-L Laser is the best when it comes to customer support and service; they are also the most economical to operate over the life of the system. S-L Laser USA is a company with world class technology based in North Carolina. Cut labor, improve quality, without expensive and time consuming modifications to your existing equipment. PHONE: 800-289-5627
I have worked in the residential and multifamily construction industry for 25 yrs. I started as a framer and have held numerous positions throughout my career. I have held a position as a Division Manager for a Wall Panel Facility that was part of a Building Material Supply Company. In this position, I was responsible for total operation of the division including P&L responsibility. I have also been a Department Manager of a Wall Panel Facility at a second Building Material Supply Company. During my career, I have held positions as a Director of Purchasing and a Purchasing Manager for Home Building companies, as well as an Operations Manager at a Soffit & Siding installation company. In this position, I was responsible for the day to day operations of the company.
Relocation: FL, GA, NC, SC, USA - Eastern, USA - South, AL, AR, KY, NV, CT, ME, NH, VT ID: C11667 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
meet your specifications, test when applicable, and check references. We will only present candidates who are qualified and have an interested in employment that matches your needs. Every candidate presented must first review your opportunity and request to be presented. No Resume Spam from the JobLine!. Give us a call if you have any questions. References are available.
To request information on any of these candidates or to discuss your hiring needs, please call: Thomas McAnally 800-289-5627 x1 or email: thom@thejobline.com
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
Don’t Forget! YOU SAW IT IN THE
Adverti$er
September 1st, 2013 #06170 PAGE #30
Hiring Zone - Available Candidates Plant/Location/General Manager Truss Truss and Components Plant Manager with over 15 years of experience in the truss industry who is looking to apply knowledge gained while continuing to develop and grow within the management sector. As Plant Manager: Create programs to motivate employees to achieve peak productivity. Hire, train, discipline and terminate employees. Order lumber and all production materiel. Coordinate weekly production, sales and safety meetings. Research cost on purchasing new equipment. Attended monthly city council meetings to ensure codes were followed. Oversee development of truss fabrication facility. Ensure compliance with Cal OSHA and Dot. Oversee shipping and optimize freight costs. Responsible for training leads and supervisors on company policy’s. Program and operate computerized equipment. Proficient with Microsoft Programs, Excel, Word, Outlook, ERP software Team growth and development through effective feedback and ongoing mentorship Excellent communication skills Experience working with: Metal, Polymer Blends, Components, Finished Product Assembly, Clean Room, etc. Tenacious, Professional, Detail-Oriented, Strong Sense of Urgency Lean Manufacturing Certified, Kaizen Trained, Fork lift Certified Relocation: Arizona, Arkansas, California, Colorado, Florida, Hawaii, New Mexico, Texas, USA - ALL States Txt: C10500 to 406-210-1226 or call 800-289-5627 x1
Design/Plant/Management - Truss/ Panel/EWP As Operations Manager, Grew the operation by diversifying the customer base, revenue of additional $6M/Year. Increased production output by 33%. Increased production capacity by 50%. Grew production staff to over 110 employees. Reorganized roof equipment to increase production capacity by 40% and optimize material flow reducing indirect labor and expense. Increased sales by introducing new market segments not a part of the current business. As Design Manager, Scheduled and assigned design responsibilities as needed. Improved efficiency of the department by eliminating unnecessary positions and enhanced the ability to use available technology. Unified the design department as one unit v/s two individual entities (quoting and orders). Reduced the error rate by focusing on 5 core fundamentals. Reduced the amount of time needed to complete a job to order phase by installing a more efficient process form quote to order. Txt: C11988 to 406-210-1226 or call 800-289-5627 x1 PHONE: 800-289-5627
Sales/Sales Manager - Truss/Panel Relocation: Illinois Oversee the component sales department. All salesman reported to me on a daily basis with concentration on selling turnkey packages to Chicago's larger framing contractors. I brought long term relationships along with product knowledge to get awarded commercial projects such as memory care facilities, senior living projects and apartment complexes. Individual projects range from $100,000 - $800,000 panels and trusses. Txt: C11999 to 406-210-1226 or call 800-289-5627 x1
Truss Design Technician/Sales Relocation: USA - ALL States, USA Western Utilized AutoCAD and proprietary design software for production of a truss design package consisting of engineered drawings, component layouts, and connection requirements. Analyzed customer plans and needs to ensure compliance with pertinent building codes and proposed building design modifications/improvements to provide a successful, cost effective truss design package and satisfied customers. Conducted field visits providing installation and repair solutions. Introduced new, more effective methods for tracking customers and orders using Access/SQL database and spreadsheets. Directed production personnel in the maintenance and operation of automated machinery. Provided necessary updates and training for office and production personnel via hands-on training and self-directed manuals Txt: C11998 to 406-210-1226 or call 800-289-5627 x1
Design/Estimating/Management Truss 12 years truss experience. Inside sales and estimating, and customer service. Design custom homes, commercial jobs, remodels & additions, field measure with framing crew and prepare job for production. Inventory control and purchasing lumber and plates. Trained all other employees in AutoCAD and produced all layout, calfill, hip fill, and blocking templates for production purposes. Great job, loved it and would have stayed forever. Software: MiTek, Alpine, AutoCAD. Relocation: Arizona, California, New Mexico, Texas, USA - Western, USA South, USA - Southwest, Colorado Txt: C11639 to 406-210-1226 or call 800-289-5627 x1 General/Location/Regional Manager Truss/Panel/EWP P&L responsibility for floor and roof truss plant mostly building tract and single family custom. Also distributes EWP. All departments report to the candidate with oversight by a corporate sales manager for the sales staff only. Has managed two shifts with 100 +/- employees at the $13,000,000 to $16,000,000 level. Prior industry experience includes EWP Division Manager, Technical Sales Representative, and EWP Designer. Is also an experienced framer/framing foreman. Education: Associates degree. Has a working knowledge of, but is not currently proficient in AutoCAD, TJ Epert, MiTek 20/20 and eFrame. Txt: C10241 to 406-210-1226 or call 800-289-5627 x1
Outside Sales - Truss/Panel/EWP/I-Joist 9 years experience. Quote prices to customers from blueprint takeoff and lists. Jobsite visits to resolve problems. Sales reports to management and for personal use as necessary. Design of jobs OMPONENT ANUFACTURING for estimating and production. Introduction of new products to customers. Development of relationships with existing as well as new S S B C ,E W P M I customers. Sold $2.5-4 million annually in roof and floor trusses. Most of business was sold to lumber yards. The majority of Cutting/Optimizing/Design my projects were multi-family, however I Truss Relocation: California, Colorado, Ten- have sold many high end custom house jobs. Relocation: USA - ALL States nessee, Texas, Washington Read blueprints for tract homes, custom ID: C10922 Txt: C10992 to 406-210-1226 homes and apartments and condos. Translate or call 800-289-5627 x1 blueprints into MiTek eframe program. Layout then design roof trusses and create the necessary paper-work for production. Discuss blueprint issues with the architect Plant/Production Manager and go out to the job-site if necessary to Truss clarify any problems in the field. I am happy My experience in the industry is extensive and to say I caught many errors before it cost includes engineering, sales, administration either the architect, the company I worked and production. I think it would be easier to for and/or the builders any money. I am list two job descriptions I can't claim credit also happy to say that I didn't make any for performing, with a caveat, although I mistakes during my time with the company. never operated a component saw or worked (4.5 years) extensively in the maintenance department I Txt: C12011 to 406-210-1226 had a tremendous success improving aspects or call 800-289-5627 x1 of both these areas. I was a hands on owner,
M ACdverti$er ERVING THE TRUCTURAL UILDING OMPONENTS
NGINEERED
OOD RODUCTS AND
ILLWORK NDUSTRY
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
even to the extent of developing a 28 hour training course in truss fabrication which potential employees had to pass. I lowered our workers comp x-mod to .58 and kept it there. I lead over 200 individuals and knew each one of them but I did have trouble with the names of their wives and children. I coordinated efforts of every department as if from one customer to another. I read extensively and studied trends in order to develop industry best practices. Customer satisfaction, quality and safety can and must work hand in hand. It is often said, "You can only offer two of the three things customers always want";and you must choose between Price, Quality or Service. I don't believe that is a true statement and the entity which can satisfy all three? ....has everyone else wondering how they do what they do! I put together production fabrications team which quadrupled production. I created a sawsystem which could handle 5,000 boards /shift with 7-800 set-ups.(on 1 component saw) I helped develop a fully automated functioning quality control devise for roof trusses which is now patented. I could go on and on about the past so, I will say, I overcame huge obstacles and I met with success. But failures followed those successes I am being honest. I think my best ideas will reflect additional lessons learned following such failure. They be the ones which are suited to improve an envirionment where opportunities currently exist for significant bolstered by an awareness we should always strive for improvement. Whatever we are doing now can in whatever aspect of an operation you turn your attention to can be made better.. Relocation: USA - ALL States ID: C11943 Txt: C1943 to 406-210-1226 or call 800-289-5627 x1
M ACdverti$er OMPONENT
ANUFACTURING
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
Design/Estimating - Truss/EWP/Windows/Doors Primary duties: design, layout, optimization, cutting/production documents, and takeoff. Secondary duties: checking others work, repairs, and customer service. Software used: MiTek, Robbins, CAD - Optiframe, BC Framer and BC Calc. Component experience includes floor trusses, roof trusses, I-Joists, and EWP. Market experience includes tract, single family, single family custom, multifamily, and light commercial. My volume was $100,000 to $300,000 a month. Thom’s Notes: NOT a job hopper. Relocation: MD, VA, WV Txt: C10359 to 406-210-1226 or call 800-289-5627 x1 FAX: 800-524-4982
M M ACCdverti$er dverti$er OMPONENT OMPONENT
ANUFACTURING ANUFACTURING
September 1st, 2013 #06170 PAGE #31
Don’t Forget! YOU SAW IT IN THE
Safety First! Safety Meeting Topics From State Fund CA.
Noise - Hear Today Gone Tomorrow Most workers take good hearing for granted. Hearing loss can happen so gradually that it can go unnoticed until it’s too late. Then, even a hearing aid may not help. Some assume hearing loss is the unavoidable result of getting older, yet most hearing loss is due to noise over a lifetime. While loss of hearing may result from a single exposure to a noise or explosion, such traumatic losses are rare. Most cases of hearing loss begin gradually in frequencies slightly above that of human speech and then subtly spread to lower and higher frequencies. Hearing loss can disrupt job performance, cause stressrelated problems, increased heart rate, fatigue, irritability, tension and lead to unnecessary accidents or injuries on the job. The workplace can be very noisy. Both the amount of noise and the duration of exposure determine the ability to damage hearing. Workers may be exposed to noise from many sources: equipment, vehicles, or tools, to name a few. Any of these things can damage hearing when exposure accumulates over extended periods of time. How can you tell if work is too loud and may be causing hearing damage? It’s too loud if: •
You have to raise your voice to be heard.
•
You can’t hear someone less than two feet away without shouting.
Adverti$er Hoy Puede que Oiga, pero Mañana No
La mayoría de los trabajadores presuponen que tienen buena audición. Pero la pérdida de la audición puede ocurrir de manera tan gradual que a menudo éstos no se dan cuenta hasta que es demasiado tarde, cuando ya no es posible solucionar el problema ni siquiera usando audífonos. Algunos piensan que la sordera es el resultado inevitable de la vejez, aun cuando la mayoría de los casos de pérdida de la audición se debe a la exposición continua a ruidos, y no al pasar de los años. Si bien la pérdida de la audición puede ser el resultado de una sola exposición a un ruido o explosión, este tipo de traumatismo es poco frecuente. La mayoría de los casos de pérdida de la audición comienza gradualmente, afectando la gama de frecuencias ligeramente superiores a las de la voz humana, y más tarde expandiéndose a las frecuencias por encima y por debajo de la mencionada gama. La pérdida de la audición puede afectar el rendimiento del trabajo, ocasionar problemas relacionados con estrés, aumentar el ritmo cardíaco y causar fatiga, irritabilidad y tensión, los cuales conducen a accidentes y lesiones innecesarias en el trabajo. En ciertos casos, el lugar de trabajo es muy ruidoso. Tanto la cantidad de ruido como la duración de la exposición determinan la probabilidad de las lesiones auditivas. Los trabajadores pueden estar expuestos a ruidos provenientes de muy diversas fuentes, como por ejemplo, equipos, vehículos y herramientas. Cualquiera de estas fuentes de ruido puede afectar la audición si la exposición se acumula sobre largos períodos. ¿Cómo se puede determinar si el ruido en el trabajo es demasiado intenso y puede ocasionar lesiones auditivas? El ruido es demasiado intenso si: •
Usted tiene que subir el tono de voz para que lo oigan.
•
No puede escuchar a alguien que habla a menos de 2 pies (60 cm) de distancia a un tono de voz normal.
•
Escucha sordas y apagadas las voces a su alrededor tras abandonar el área ruidosa.
•
Le zumban los oídos después de haber estado expuesto al ruido.
¿Qué pueden hacer los empleadores para evitar que sus trabajadores sufran Speech around you sounds muffled or dull after you leave a noisy area. problemas auditivos? Una buena planificación puede prevenir los problemas causados por una excesiva exposición al ruido. La principal preocupación debe • You have ringing in your ears after exposure to noise. ser reducir las fuentes de ruido. Los empleadores deben invertir en equipos que What can employers do to prevent their workers from developing hearing emitan un nivel de ruido moderado. Al realizar las compras de los equipos, los problems? empleadores pueden preguntar a los proveedores si existe un modelo "silencioso" Good planning can prevent problems caused by excessive noise exposure. o una opción reductora de ruido, como por ejemplo, cabinas de vehículos y Noise reduced at its source should be the first consideration. Employers should equipos cerrados o con revestimiento acústico. Los turnos de trabajo pueden invest in noise-controlled equipment. When purchasing, employers can ask ser ajustados de manera que la exposición a los niveles de ruido intensos no vendors if there is a "quiet" model or a noise-reducing option, such as enclosed ocurran durante toda la jornada laboral. Así, parte de la jornada se utiliza como or acoustically lined vehicular cabs and equipment. Work schedules can be período de recuperación tras la exposición al ruido. De igual importancia es el adjusted so that exposure to high noise levels does not occur for the entire work uso de dispositivos de protección personal, tales como tapones y protectores para day. This allows a noise recovery period to be part of the work shift. Equally los oídos. Los empleadores deben ofrecer capacitación sobre el uso de dichos important is the use of personal protection devices, such as ear plugs and ear dispositivos y sobre las consecuencias a nivel auditivo que pueden sufrir los muffs. Employers should provide training on the protection devices available trabajadores de no usar este tipo de protección. La capacitación debe incluir la and the effects of noise on hearing if workers do not use the protection. Training colocación, uso y cuidado del dispositivo de protección auditiva. should include the fit, use, and care of any hearing protection device. Los empleadores no siempre pueden impedir el ruido, pero sí pueden Employers can’t always prevent noise, but they can lessen the chance of reducir la probabilidad de que los trabajadores sufran la pérdida de la audición, workers experiencing hearing loss by having them follow established safety haciéndoles seguir los procedimientos de seguridad establecidos y exigiendo procedures and enforcing the use of proper hearing protection. Don’t risk losing el uso de dispositivos de protección auditiva apropiados. No se arriesgue; un a worker’s hearing on the job. Silence may be a great thing, but not when its trabajador podría perder la audición a causa del ruido en el lugar de trabajo. El silencio a veces es muy agradable, pero no cuando es permanente. permanent. •
The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. PHONE: 800-289-5627
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
September 1st, 2013 #06170 PAGE #32
Don’t Forget! YOU SAW IT IN THE
Adverti$er
Business & Professional Services Listings
Your Ad Could be Here M ACdverti$er
Truss Design | Wall Panel Design | Whole House Materials
OMPONENT
exclusively for MiTek 20/20 customers
www.componentrunner.com 314.374.7400
ANUFACTURING
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
CDean@ComponentRunner.com
JobLine.com
the
800-289-JOBS Is your business on a flat performance or growth line? Comprehensive Management and Manufacturing experience in industries from Structural Building Components, steel and green products, that you can put to work for you.
Time To Hire?
New Business StartͲUp
Product Development
Lean Manufacturing
Project Management
Strategic Plans
Green Programs/CerƟĮcaƟons
Talk to us about our special on precision wall panel headers that will save you money.
We’re here when you need help!
www.thejobline.com
Visit our website at www.4WardConsult.com or contact Ben Hershey at 623.512.6770.
Before You Buy Equipment! Save tens of thousands of dollars by first getting a complete assessment of all your current and future needs with a lean manufacturing consultation.
Used Equipment Wanted! 8’ or 10’ Finish Roller Used Floor Truss Web Saw
Ö Proven
and Practical Methods for Better Productivity in All Areas Ö Time Standards (Truss Labor Estimations) Ö Lean Manufacturing Principles Ö Theory of Constraints Principles
NORMAL NET PROFIT GAINS ARE 3 TO 6 POINTS! 9 60+ Clients - See Web Site for Testimonials 9 10th Year Lean Consultant Services All Areas Covered - 50% Shop / 50% Office
9 25 Years in Truss Industry Todd Drummond Consulting, LLC www.todd-drummond.com todd@todd-drummond.com Phone 603-763-8857 PHONE: 800-289-5627
765-751-9990
Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Planx Ready Tables Triad “Diamond Quad” Framing Tables Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16
Toll Free: 800-382-0329 www.wasserman-associates.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er OMPONENT
ANUFACTURING
September 1st, 2013 #06170 PAGE #33
Don’t Forget! YOU SAW IT IN THE
Adverti$er
Reader Response Form FAX to: 800-524-4982
Reader Response Sponsors
or email: info@componentadvertiser.com
Name: ____________________________________________________ Company:
______________________________________________
Address:
______________________________________________
City:____________________________ State:______
Zip:______
Phone: _________________________ Fax: ______________________ Email: ____________________________________________________
How would you like to be contacted? Phone Fax Email
Check All that Apply
www.mii.com/MiTekAssurance List of Items you are interested in: List the Page # and Title of the item. PAGE # ITEM TITLE ____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
COMPONENT MANUFACTURING dverti$er
A
SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY
Thomas McAnally - Publisher 800-289-5627 x1 PHONE: 800-289-5627
WWW.SPIDA.CO.NZ
Our Advertising Rates will
Blow You Away!
CALL NOW!
tmcanally@componentadvertiser.com
www.componentadvertiser.com
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
www.mii.com/MiTekAssurance
 Page 34
Component Manufacturing Advertiser
September 1st, 2013