A #
179
PUBLISHED MONTHLY June 1st 2014 #07179
Component Manufacturing dverti$er
Serving the Structural Building Components Industry
Inside: Question of the Day:
page 3
Oakland Athletics Baseball and Component Manufacturing?:
page 7
Layman’s Lumber Guide: Madison’s Canadian Lumber Reporter: Are you paying 60% Interest on Lumber:
page 14
page 21
page 24
JobLine Hiring Zone: Available Jobs Available Candidates
page 28
Safety First Topics in English/Spanish:
New Equipment Directory: Business Directory:
page 33 page 34 page 35
Page 2
www.mitek-us.com/planxreview
Component Manufacturing Advertiser
June 1st, 2014
M ACdverti$er omponent
anufacturing
Published Monthly Editor/Publisher
Thomas McAnally tmcanally@componentadvertiser.com
Advertising
Thomas McAnally Position available
Subscriptions
Renae McAnally
Distributed FREE
via e-mail subscription or on line at www.componentadvertiser.com
Download FREE and
subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources. Deadline is the 25th of each month. Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011-20122013-2014
Component Advertiser
PO Box 16685 Fernandina Beach, FL. 32035 no reproduction in whole or in part without permission from the component advertiser
eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com
Member PHONE: 800-289-5627
June 1st, 2014 #07179 Page #3
Don’t Forget! You Saw it in the
Adverti$er
Question of the Day By: Stan Sias
?
Lateral restraints… What, Where, When, Why…and by Whom?
We have all seen the Truss Design Drawings where there are a slew of Continuous Lateral Restraint (CLR) indicators on the webs indicating that they need someone’s attention. Does that someone (most likely the installation contractor) know what you know about the need for this special attention? Are they going to install the CLRs and necessary diagonal bracing to permit your trusses to perform as designed? Let’s have a look at the 5Ws.
What is a Lateral Restraint? The Building Component Safety Information (BCSI) booklet defines Lateral Restraint as: A structural member (typically lumber or metal) installed at right angles to a chord or web member of a truss to reduce the laterally unsupported length of the truss member (ANSI/TPI 1 has similar language). OK, the Lateral Restraint is required to reduce the buckling length of the member in question, what makes it become ‘continuous’? Let’s again look at the BCSI. A Continuous Lateral Restraint is defined as: A line of structural members (typically lumber or metal) installed at right angles to a chord or web member of a truss to reduce the laterally unsupported length of the truss member. Continuous restraints happen when there are several like members in a row needing the same buckling length reduction. Where do lateral restraints need to be placed? The location or locations of lateral restraints depends on the forces within the member. When the forces exceed the limit for the member length a single restraint will be tried at the member centerline. If the force is still too high, a second restraint will be located at the member third-points. ANSI/TPI 1 -2007, Chapter 2 places the responsibility for specifying the location(s) of Required Permanent Individual Truss Member Restraints on the Truss Designer or Truss Design Engineer. The Method of Restraint is the responsibility of the Building Designer. By reference, ANSI/ TPI 1 is a part of both the IBC and IRC.
When do Lateral Restraints become necessary? Lateral Restraints (and diagonal bracing) become necessary to prevent deformation when lateral loads are applied to the member and/or the accumulation of compressive forces within the member exceeds limits. Different species, sizes and grades of lumber have differing compressive strengths. Why do we need these Lateral Restraints? Can’t they be designed out of the truss? Many times it simply depends on your objective when designing/bidding the job as to whether you try to eliminate or minimize the number of lateral restraints required. If low price is your objective then you’re probably not going to bother to flip, up-grade or up-size the web to eliminate the necessity. If, on the other hand, you’ve discussed this with your customer and have promised to eliminate them whenever possible, you’ll do whatever it takes to get rid of them. When they are necessary, you’ll want to share that
Stan Sias - National Manager
Plated Truss Industry at Simpson Strong-Tie
info with your customer so that they cover the material and labor for the known CLRs. Where does it state whose responsibility it is to install the lateral restraints and associated diagonal bracing? The ‘Who’ question is also answered in ANSI/TPI 1, Chapter 2. Sections 2.3.4 & 2.4.4 clearly specify that the installation of Temporary Installation Restraint/Bracing for the truss system and the permanent truss system Lateral Restraint and Diagonal Bracing for the completed building is the responsibility of the Contractor. OK, for a minute let’s assume that the required Lateral Restraints not installed, now what? My friend, Dave Motter, PE, at Louws Truss in Burlington, WA addressed this very topic during a presentation at the 2010 BCMC the last time we were in Charlotte. Dave reported that that actual load carrying capacity of a truss without required CLRs installed could be reduced by as much as 75%. Does anyone think that the installation contractor knows that? Does the Building Official know that? What about the Building Designer? How do we think the occupants of the building would feel about this ‘cost saving’ measure being taken with their building project? This raises a few more questions and may perhaps warrant a discussion on the topic with your best customers. 1. What do CLRs really cost the installation contractor and does he willingly accept that cost? 2. How is the installation contractor supposed to know what restraint and bracing is required when bidding the job before the deferred truss submittal is available? 3. What price is the customer really looking for when they ask you to produce a bid? Do they really want the lowest invoice price or are they more interested in what the job has cost them as they walk off the site? After all, it is that price that determines if the job was profitable or not. Having these types of conversations with your customers is rarely detrimental to your relationship. It may even provide you with an advantage over your competitors. Good things happen when they know that you’ve got their back. In addition, the education they get from the conversation will help to assure that the CLRs that are required will actually get installed.
Read/Subscribe online at www.componentadvertiser.com
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
FAX: 800-524-4982
Auto Eye Truss system
Fast Reliable Accurate
www.randek.com www.randek.com
Auto Eye Truss System is an automatic truss production system developed with speed, accuracy and reliability in mind. Read more about our products at randek.com
omponent
anufacturing
SAWS
Don’t Forget! You Saw it in the SAWS
Adverti$er SAWS
e n ic io r t P uc ed R
2013 Apollo Radial-Arm Saw WITH Mango Automation Automated centerpoint saw, direct-drive 5.0 h.p. 230/460v, 3ph (208v - 575v) power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37” cuts with an 18” carbide-tip blade. Featured price includes integrated Mango length automation and roof truss software (compatible with all truss/wall-design software), 17" LCD touch screen display, 30' of gravity conveyor, full OEM warranty, and 12 months of phone and virtual tech support, two-day, on-site installation and training. Apollo saw features, HD steel frame with powder-coat finish, and noncorrosive exposed materials (zinc-plate, bronze, aluminum), Blade-stroke limiter, see-through Plexiglas shield, and laser cutting guide now standard for maximum operator safety and minimal regulatory hassle! Add $1,500 for wall marking hardware/software option. $38,700 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Advertiser Trivia
What is the most common element on earth? Answers on page 35
2006 Mango Apollo Saw 2006 Apollo saw[s] featuring Direct-Drive 5.5 h.p. 220/440v, 3ph power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37” cuts with an 18” blade. Features stroke limiter, powder-coat finish, 20' conveyor on the feed side and 10' conveyor on the exit side with vacuum dust collector. OEM Installation and service agreement available from MangoTech USA. $8,890 NOW $7,390 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1999 Holz-Her Accura "S" 14' Beam Saw Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
SAWS
R P ed r u ice ct io n
M ACdverti$er
June 1st, 2014 #07179 Page #5
2006 Hundegger SC-1 Linear Saw •Servo Driven Single Blade Linear Saw •Angle & Bevel Drive for Roof Truss, Floor Truss & Wall Panel Cutting •Process Lumber from 1/2” x 1 1/2” to 6 1/4” x 17 3/4” up to 26’ in Length •Automated Cutting with Software Download to Operator Console •Automated Infeed Conveyor & Table •Automated Clamping & Positioning System •Outfeed Table with Ink Jet Printer •Currently in operation and available for inspection until the end of March 2014 •Optional Installation, Maintenance & Tech Support available from Hundegger. FOB AB. $105,000 NOW $95,000 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2005 (12/05) Wyrks Tool / Omega Double End Web Cutter 2005 (12/05) Wyrks Tool / Omega Double End Web Cutter / Model 12-05-J-260038 / Cuts 2x4, 4x2 & 2x3 Rounded End RT&FT Webs / Electric and Hydraulically Powered / 460 Volts 3 Phase / Bought New in 2005 for $70k. The rounded end web system that can replace up to 70% of conventional angle cut webs and they deliver equivalent performance. The system is a field proven manufacturing system that saves hours of cutting and assembly time, which can greatly reduce costs. It consists of the rounded Roof and Floor webs. Rounded webs are a fully tested alternative to conventional truss webs. Design procedures for both lumber design and plate connections are in full compliance with ANSI/TPI 1-2002 “National Design Standard for Metal Plate Connected Wood Truss Construction” NOW $4,800 FOB: GA Salter Associates 770-434-1006 www.salter.com
Delta Unisaw 10" Tilting Arbor Saw -Model 36-951 -Left Tilt -Biesemeyer Fence System -5 HP / 230 Volt / 3 Phase $1,250 FOB KS. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
www.mitek-usa.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
Adverti$er
June 1st, 2014 #07179 Page #6
748 MALEME ST, TAURANGA, 3112, NEW ZEALAND P: +64 7 579 5010 F: +64 7 579 5020 TOLL FREE USA: 1 888 262 9476 TOLL FREE CAN: 1 866 497 1562 W: WWW.SPIDA.CO.NZ
SAWS
2005 Hundegger SC-1 Saw CNC Linear Saw / Live Deck / Beveling Head Out Feed / Cuts I-Joists, LSL, LVL, Glue-Lams, etc. Bought New / Used Only (2) Years Operational Inspection Available Excellent Condition / FOB FL $240K New / Asking $86k Salter Associates 770-434-1006 www.salter.com
PHONE: 800-289-5627
SAWS
SAWS
Idaco Webmatic 4 Blade Web Saw Manual Angulation, 9" to 16' Length Capacity. Waste Conveyor(under saw) needs New Belt(approximately $400). 480 Volt/3 Phase. Excludes Incline Waste Conveyor(adjacent to saw). $6,900 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2003 Alpine Metra-Cut Saw w/20' Hain Measuring System 5 HP Motor with 16" Blade. 230/460 Volt, 3 Phase. 20' Hain Powered Measuring System & 10 Infeed Roller Conveyor. Turntable Air Brake. Price: $6,900.00 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
SAWS
Holtec Transcut Portable Crosscut Saw •20 HP Kohler Gasoline Engine •Cutting Capacity: 48" x 48" •Chain Oiler •Guide Bar with Chain Tensioner •Kickback Safety Bar •Squaring Frame $5,250 FOB NV Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
Todd Drummond Consulting, LLC. Oakland Athletics Baseball and Component Manufacturing? Website: www.todd-drummond.com Phone: (USA) 603-763-8857 Email: todd@todd-drummond.com Copyrights © 2014
Anyone who knows me to any degree will tell you I am not a sports fan. I do not follow any professional sports or know much about the players and culture. So it may surprise you to have me compare component manufacturing (CM) to baseball. To be honest, I mean to compare the management practices of the Oakland A’s, whom I witnessed in the movie “Moneyball,” which was based on their 2002 season. What I saw in this movie shocked me because I witnessed the same human behavior I deal with in my professional career as a consultant in our industry. In a nutshell, the general manager, Billy Beane, did not have enough money to hire the very best players to get the winning results he was tasked to achieve. If he did the same thing as always, he knew the results were going to be the same as they had always been before. So instead of recruiting players the traditional way, with the tried and tested method of scouts looking for the best players and then relying on the highest bidder to win, he broke all the rules. He used what many now call a sophisticated “sabermetric” approach to scouting and analyzing players (pure empirical analysis). What do you think the resistance in the team and especially the rest of the management group was like when he implemented these brand new ideas? Again, Billy was telling people that their old methods were no longer going to be used. There was a torrent of resistance. This was a great example of what happens when we implement changes to what we think are the best methods that most of us have been following for years. Think about it for moment: Do you really think managing a sports team is all that different than managing a CM plant? Both have a need for qualified personnel who have a set of skills to perform tasks so that stated goals can be achieved. Human behavior is the same on a baseball team as it is in the CM shops and office. All of us want to achieve something and to be recognized for our achievements. But the management practices of motivation and benchmarks are not what I want to explain. What was most important was that the implementation of change itself caused General Manager Billy to endure a storm of resistance. Because he prevailed, his team went on to create the longest winning streak in baseball’s history: 20 games. He broke all the rules, and it changed baseball and every other professional sports team forever. (I recommend watching the movie.) Human nature is the same everywhere. I constantly hear the same types of things Billy heard from everyone: • “I have 40 years’ experience and know what I am doing!” I never doubt someone’s experience and deep knowledge, but have they been exposed to better practices and embraced them in those 40 years? • “We have always used board footage, sales dollars or number of pieces, and it is good enough!” These will never give you consistent benchmarks, so they are not
reliable. There are better methods. “We have a labor shortage (shop and/or office) because we cannot find the right people!” There are ways to afford attracting better talent and getting more from what you have, but you are fooling yourself if you think somehow the world has changed and that the people are no longer available. • “My plate vendor will let us know what the best practices are and his/her advice is free!” Yes, trusting your plate vendor was like trusting IBM stock value in the 80s. No one ever got fired for buying IBM stock. (Ask anyone over the age of 45 what IBM was to understand.) Just like in your company, if you tell people your truss plate vendor provided the software, equipment or idea, you are somewhat protected from the “radical” change. They are a safe, reliable resource. But you are seriously mistaken if you think their advice is unbiased, free or really the best idea. Ask the salespeople in your company if they try to keep out any CM competition from their own customers. Do you think your vendor is trying to prevent you from any and all suppliers of service and sales? Is that really in your best interest? The answer to that is no, it isn’t, and it is costing you a great deal of money because you never knew you were failing to realize it. Implementing change is difficult in itself because it is time-consuming and we can make mistakes. Failure is something we all do our best to avoid. Using older tried and true methods appears safer and creates far less resistance from the groups. But implementing change can and does provide results far more than many of us would initially believe. Having someone actually showing you what those changes are and how to make them mitigates the risk and lowers the cost dramatically. But you have to tell yourself: no more excuses, the time to start is now. • You have told yourself time and time again that you can’t spare the time right now. It really is never a good time because something is always more pressing, no matter what time of the year. Tell yourself that the time to start is now, and you can roll out the changes at the best pace possible. • You told yourself that you have trusted your plate vendor too much and that you really shouldn’t do this to the degree that you do. The free advice is actually costing you a great deal of money. When you look beyond your plate vendor, you can call upon many others who have taken the risk and view their testimonials. They are all saying it was well worth the fees paid and the effort required. Billy was able to change professional sports forever because he no longer accepted the status quo and was not going to listen to the excuses anymore. Just like baseball, wood truss and wall panel component manufacturing is changing. Actual tried and true common-sense methods are ready for you to embrace and will make you more money. •
The Average Truss Plant Has Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts!
Sell It!
in the Advertiser Call Today and Make Some Extra Cash! 800-289-5627
Simpson Strong-Tie® Component Solutions™ Software Suite The new Simpson Strong-Tie® Component Solutions™ suite of truss and component software is intuitive, user friendly and integrated for your business. You can create truss and panel designs optimized for production efficiency and receive engineering seals direct from Simpson Strong-Tie.
Partner for success with Simpson Strong-Tie When it comes to manufacturing metal connectors, there is no other company with the track record of reliability and performance like Simpson Strong-Tie. Our connector-plate manufacturing facility incorporates state-of-the-art technology to consistently produce top-quality plates with some of the highest loads in the industry. With our Integrated Component Systems, our truss customers can take advantage of all the elements of the Simpson Strong-Tie offering. It includes our new 3D modeling Component Solutions™ software, a full line of high-quality, code-listed truss connector plates, comprehensive training,unsurpassed customer service, and our wide range of Simpson Strong-Tie structural connectors, fasteners, anchors and lateral systems. Our long-term commitment to you and this industry has never been stronger. Tell us about your business by calling one of our specialists at (800) 999-5099. Learn more about Simpson Strong-Tie Ž Integrated Components Systems strongtie.com/ics. and sign up for our newsletter at www.strongtie.com/ics.
A heritage of integrity, leadership and putting the customer first
Š 2014 Simpson Strong-Tie Company Inc. TRUSS12-R
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
SAWS
June 1st, 2014 #07179 Page #10
Adverti$er Managing the Numbers of our Business
by Ben Hershey
2000 Koskovich Auto Omni Saw 5-blade automated saw includes shaker waste conveyor with factory side pan deflectors, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, ink-jet marking system, remote monitor with cabinet, Exair cabinet coolers, all available spares, and shakerpan conveyor. 208/240/480 volt,3 phase, 100 Amp and 120 vac, 90 Amp electrical required. Price: $24,890 :: FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
When I had control of the reins at Imperial Components/TruTrus, it was always my passion to grow the business and find new ways to be more efficient. But, I learned in my early management years that businesses succeed not just by growth, but also by paying attention to the numbers. Like most managers, you would rather spend your time on favorite activities; sales, design, production, logistics, customer interaction, etc. Some of us live for the hands on part of our jobs that we like and dread the number crunching, budgeting, planning, bill collecting, and payroll side of our business. Yet, our priority every week needs to be focused on our company’s numbers and the ability to know exactly how we are doing. As part of every managers tasks each week, a review of the numbers, the accounting side of the business, will allow us to build a base for future success and growth. What’s in front of us (our windshield) is often foggy; but what is behind us is always clear. We can cut the fog in front of us by being better planners and analyzing what’s ahead. Knowing our cash flow, our booked production, how much profit each job contributes and what expenses will be each week, allows us to plan our cash flow and what is required to run the business. That is a simple way of looking at it, but you need to know how much money you are going to need each week to meet your payroll and purchase materials. In most component plants, materials costs are about 47% and labor and salaries are 37% then figure all your other costs and you get a sense not only on what you need to have in sales, but more importantly profit and cash flow. On a very simple basis, if you know that you have $100,000 in production you need to build and ship next week, you know that you need $47,000 in materials and $37,000 in payroll costs. Now there are certainly other costs in the business to consider, but knowing your cash requirements and building a cash flow model will allow you to stay ahead of what collections you need to be each week to support the business. You can count on the numbers in your business. They drive the success we have by the same amount that we count on the products we build and the team we have working for us. You may not like the numbers, or spending the detailed time to review them, but they do need to be a priority for you. The numbers will allow you to continue to grow your business and meet the needs of your customers. The team at 4Ward Consulting works with numerous companies each month to review their numbers and help them to better manage 12" Sliding Miter Saw, Automated 20' Length Stop & Plate their businesses. If we can be of to you and your team, Positioner as directed by Design Software Output, 17" assistance contact us at info@4wardconsult. Touch Screen Computer, MangoTech Wall Panel Cutting com or call us at 623-512-6770.
N
EW
!
800-382-0329
2006 Hundegger SC-1 Linear Saw Hundegger Speed-Cut SC-1 linear truss saw, complete roof truss cutting functions including angle and bevel drive unit. Auto infeed live deck and auto-discharge, Ink-Jet marking system included. As configured this saw can process any length of material with finished parts up to 26' in length. The SC-1 processes lumber from ½"x1 ½" to 6 ¼"x17 ¾". According to Hundegger USA: "The Hundegger Whole House Saw TM is a computer numeric controlled (CNC) saw capable of cutting a wide range of roof, floor and wall framing components, including wood I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam". Maintenance program, tech support and installation are available from Hundegger USA and Hundegger Canada. This machine is currently in operation and will be available for inspection and / or viewing until the end of March 2014. Price includes packaging for shipping FOB Calgary, Alberta by Hundegger Canada. 480 volt , 3 phase electrical. Price: $104,990. FOB AB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
NEW! Miter Saw with NEW Mango Plate Marker
& Marking Software, 30' of Roller Conveyor with Stands, 12 Month Phone & Virtual Tech Support, 2 Day Onsite Training & Installation. Excludes: Dust Collector & Saw Stand.
$19,900
www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com
Ben Hershey is an expert in Continuous Process and Operations Improvement and is with 4Ward Consulting Group. He was previously President of SBCA and President of Imperial Components/TruTrus.
FAX: 800-524-4982
Toll Free 800-382-0329
www.wasserman-associates.com
Representing Manufacturers Who Take Pride in Providing Quality Products and Services
M ACdverti$er omponent
anufacturing
June 1st, 2014 #07179 Page #12
Don’t Forget! You Saw it in the
www.todd-drummond.com
Adverti$er
todd@todd-drummond.com
(603) 763-8857
25+ Years in the Truss Industry 70+ Companies Completed 10+ Years in the Consultation Business Expert in reducing cost and improving productivity in all departments of wood truss and wall panel manufacturing. Normal gains for most clients are 3 to 6 points in net profit! √
Common-sense best practices garnered from over 70 consultations.
√
All proven methods with lean principles in mind.
√
Improve all areas such as manufacturing, design and sales.
√
Proven time standards (Man minutes) for truss manufacturing.
√
I do not make any fees, commissions or other income from any equipment or truss plate manufactures. My advice is unbiased.
√
Go beyond the typical truss plate and equipment vendor recommendations!
See website for testimonials and consultation service details: Testimonials of services: http://todd-drummond.com/todds-profile/ Consultation Brochure: http://todd-drummond.com/wp-content/uploads/2013/05/Consult_Brochure.pdf PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
Adverti$er
June 1st, 2014 #07179 Page #13
Design, sales and admin productivity multiplier. Easily gain more time every day for all your personnel. Ready-made, fully customizable, used already in many industries (including the wood truss industry) all-in-one Internet-based communication system. Fully supported, onsite or offsite setup options; no need for your own IT staffing. Everything at your fingertips via tablet, smartphone and computer via the Internet. Quick - Simple - Drop Dead Easy to Use!
TDC is now collaborating with a financial advisory firm
Specializing in the Building Products and Component Manufacturing Industry.
Thinking of selling your company? If you want the absolute top dollar derived from multiple offers bidding for your company, you need to contact me.
All info linked to each W.O…. √ Multiple schedules for all departments √ User-defined dependencies for schedules and tasks √ Automated reminders √ Any type of file such as prints √ Notes viewed by all √ Change order requests √ Audit trial √
MS Outlook® e-mails
And much more to give your people more time to get things done!
Testimonial of Consultation Services Over the years United Truss (a subsidiary of United Lumber) has done an outstanding job of providing our customers with quality trusses for their building needs. We reached a point, though, where our manual practices were restricting our capacity to not only serve existing clients, but also limited our ability to serve or target new customers. So, in the midst of automating our plant and updating our production/design practices, we chose to contact Todd. Innisfil, ON Canada Were we ever glad we had made the leap to request Todd’s consultation services. Todd’s consultation encompassed time and motion studies, best practices, the theory and practical components of lean manufacturing, which then enabled us to go back to the drawing board in terms of our pricing model. For years we had been pricing our products without actually and properly tracking our actual costs. Todd’s teachings showed that we could and should incorporate proper costing fundamentals into our model, and the icing was he showed us how to do this. Without a doubt we made the right decision to hire Todd Drummond, and once fully implemented, we have no doubt that United Truss will reach heights we had never thought possible under our old regime. Our entire staff, encompassing our production and design staff as well, were both impressed and thankful for the ideas and instructions that Todd brought to the table. Thanks Todd
Ed DeBiasio , President, United Lumber
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er anufacturing
Don’t Forget! You Saw it in the
Adverti$er TRUSS EQUIPMENT
TRUSS EQUIPMENT
R P ed r u ice ct io n
omponent
June 1st, 2014 #07179 Page #14
800-382-0329 Late 2007 Alpine X4 Linear Saw e n ic io r t P uc ed R
$54,000 NOW $40,000 FOB IA
2004 MiTek Tracked Gantry 2004 MiTek 88' x 14' working length sideeject system includes (12) slotted-steel top tables with (3) receivers, (1) MiTek gantry head model 87700-502 (Tee-Lok) with pendant controls and 24" dia. rollers. Includes all available rail. 575V, 3 phase electrical. Price: $23,990 :: FOB MI Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1983 Jager Travelmatic Mini III Truss Press -40 Ton Hydraulic Press with Continuous Platen (575 Volt/15 HP) -40'-0" x 6'-0" Drilled & Tapped Steel Top -1" to 6" Pressing Height -Roof Truss Jig Hardware -May Require Finish Roller (Subject to Wood Species & Connector Plate Size). $13,900 NOW $12,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com
-Touch Screen Control Panel -5 Axes of Automation -15 HP Motor with 22" Blade -Cut 1, 2, 3 or 4 Boards at the same time
-Ink Jet Printer -Auto Feeder (Live Deck) -Hydraulic Clamping -2 Outfeed Conveyors for Sorting -Incline Waste Conveyor -Installed January 2008, Out of Service March 2010
1999 TimberMill 6-20 Pro Component Saw Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12" up to 20'-0". Base Plane Referencing and Pivot Axis Elevation for Faster Setup and Greater Accuracy. Powered Angulation & Carriage. Single Sided Digital. Waste & Incline Conveyor. Extra Blades. 480 Volt / 3 Phase. $14,900 NOW $13,500 FOB IN. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
Rand Final Roller Press Rand finish roller press with 14' throat x 18" diameter rolls, forward/reverse functions, (2) 5 HP motors, safety bars, 80 RIV chains and drive enclosures. 220 volt, 3 phase electrical. Price: $8,900 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
R P ed r u ice ct io n
R P ed r u ice ct io n
www.wasserman-associates.com
2007 MiTek Floor Truss Stacker Foor truss stacker. Stacks single, double, or triple high stacks, includes 10 idle/powered outfeed conveyors, with OEM control panel. 208v, 3 phase power. Price: $14,190 :: FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1998 ASI/Monet DeSauw B400 Four Blade Component Saw -Push Button Controlled Single Side Setup with with Digital Readouts -Backup Mechanical Indicators -Powered Hold Downs -(2)16" Blades and (2)30" Blades -Cut 4x2 & 2x3 thru 2x12 up to 20' -Vibrating Waste Conveyor (under saw) -Excludes Incline Waste Conveyor (adjacent to saw) -Includes Jefferson Electric Transformer. $14,900 $11,900 NOW $10,900 FOB KS. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
CMF Tracked Gantry Tables Quantity of (4) 6' X 14' slotted, 3/4" steeltop tables with ejectors (some partial) and some rail for an extension of a roller gantry truss line. Tables also useful for Wall Panel sub-components, roof-truss "junk" tables (jacks, valley-sets, etc.), metal fabrication tables. Will sell individually. Price: $2,500 ea. :: FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Read/Subscribe online at www.componentadvertiser.com
1997 MiTek Tracked Gantry Equipment 1997 tracked gantry system featuring (2) MiTek model 68000 gantry heads, (15) slotted steel top tables, (15) idle outfeed conveyors, (11) powered outfeed conveyors, (16) idle outside conveyor, and (7) manual stacker arms, all crane rail with base plate. System is currently in operation and available for inspection by appointment . 460v. 3ph power. Price: $68,950 $58,950 :: FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982
LUMBER MARKET INTELLIGENCE Softwood Framing Lumber Market Forecast & Trade Sreategies Since 1985
Matt Layman, Publisher
TWITTER.com/Laymansguide | www.laymansguide.org | LinkedIn Group Layman’s Lumber Guide
Interpreting the Conversation Trend Analysis •
•
•
Forecasted Decision Points propose a 4-week decline, Memorial Day thru July 4th, with a two week reversal over the "cookout" holiday break. 6x10 Historicals forecast accelerated downside momentum mirroring the FDP, with a summer recovery beginning late July. Sales/Production Ratios indicate mill order files have deteriorated over the last two weeks. SYP buyers took longer to replenish and now dealers, treaters and truss plants are well covered.
Lumber Market Summary Many wholesalers and distributors proclaim that dealers are still under bought, however dealers disagree. Dealer buying has declined from three weeks ago, which is no surprise, rather it has been expected. Mill order flow has lost upside momentum, yet producers are clinging to current levels. Meanwhile, wholesalers under cut by $5-10. "Shipment insurance" loads are arriving, creating inventory accumulation. So why does the conversation continue to be "dealers are under bought"? Well, if I was sitting on a pile of excess wood, what conversation would I create...bullish or bearish. I could be real convincing back in my trading days. And how do we know our lumber market is sufficiently bought? Five weeks of rising prices confirm inventory accumulation...and now? Now we begin the most bearish four week trend of the year...Memorial Day thru July 4th. •
Buying Strategy...Regardless of what you hear, what you think...historically, lumber prices should fall $30 or more over the next 4-5 weeks. Delay purchases.
•
Selling Strategy...With prices forecasted to decline 10+% by July 4th, it makes sense to give up a few bucks before the declines become contagious.
Matt provides us with page #1 of 3 at no charge. Get the rest of the story! Request subscription information from matt@laymansguide.org ... 336-516-6684 Follow us on Twitter.com/laymansguide www.laymansguide.org Lumber Market Intellenge... Matt Layman, Publisher 145 N. Main St., Cramerton, NC. 28032 Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: Matt@laymansguide.org Reprint or distribution is unlawful without permission. TWITTER.comLaymansguide Join LinkedIn group Layman’s Lumber Guide
M ACdverti$er omponent
anufacturing
June 1st, 2014 #07179 Page #16
Don’t Forget! You Saw it in the
Adverti$er TRUSS EQUIPMENT
www.integratedstealth.com
Robbins has been Integrated!
TRUSS EQUIPMENT
2002 MiTek Tee-Tracker Gantry Featured System: 14' X 73' side-eject, trackless system complete with ten (10) 6' X 14'slotted, 3/4" steel-top tables w/ ejectors, one (1) MiTek Tee-Tracker Gantry head 14' X 24" dia. roller with pendant control, Demag Gmb motor, controls, and drive components with Auto-Lube. System includes dual park stations, (8) powered conveyors, (7) idle conveyors and all available system hardware. 460v/230v, 3ph, 60Hz. OPTIONAL CONFIGURATIONS: Using Tee-Tracker components allow us to configure any system length long or short. Available equipment includes six (6) MiTek Tee-Tracker gantry heads, 60+ Tee-Tracker all steel, slotted-top, side-eject tables, park stations, conveyor rollers, and one (1) 24" diameter final roller x 14' standard throat is available at an additional cost. $49,900 fob NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2005 Koorsen Connector Detector Location: AZ Price: $6,500.00 -6 detection zones to locate missing plates -Horn & zone lights indicate missing plates -12" to 60" adjustable height from floor -110 Volt / 1 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Integrated Stealth Technology has refurbished this Robbins Line and added Auto Jigging. Our equipment can help you produce trusses faster and with substantial savings. Integrated Stealth Technology can do what it takes to satisfy your equipment needs. We have equipment refurbished as new available now at affordable prices. In addition to Robbins, we have also upgraded equipment from Alpine, Tee-LoK, Klaisler and MiTek to the new integrated auto system. We also, can help you with your replacement parts for all the major brands of truss equipment.
Let us Integrate your old equipment Contact us for any questions or to request additional information. Also, please check out our recently updated website.
517-323-1996 | 800-662-2857 ed@integratedstealth.com | www.integratedstealth.com TRUSS EQUIPMENT
TRUSS EQUIPMENT
Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
MiTek TK-8 Klincher 60' C-Clamp Systems MiTek TK-8, 20 ton C-clamp style press with 60’ working length floor-mounted jig filtering. Each system includes: support beam, manual trolley, counter balance arm with hydraulic reservoir. Three systems available. Price is per 60’ system. $6,900 each. FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
JobLine.com
The
, inc.
800-289-JOBS
Design your own custom roof truss gantry! Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990 PHONE: 800-289-5627
2007 Klaisler Tracked Gantry Head Klaisler Gantry with riding platform, 24" diameter roll, variable frequency drive and Sumitomo twin drives, Very low hours. 230/460v, 3 Ph. Price: $18,990 :: FOB SC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Time To Hire?
www.thejobline.com Read/Subscribe online at www.componentadvertiser.com
Klaisler Receiver Arms (27) Klaisler Receiver Arms Date of Manufacture: 2005 & 2006 Excellent Condition Reduced - $550 FOB GA Salter Associates 770-434-1006 www.salter.com FAX: 800-524-4982
PASSIONATE ABOUT OUR WORK AND DEDICATED TO OUR SERVICE
FINISH ROLLERS FOR ROOFS & FLOORS COMPACT DESIGN & ECONOMICALLY AFFORDABLE (2)12” DIAMETER X 4’ to 8’ LONG ROLLERS WITH CONTINOUS SHAFT AVAILABLE IN 4’, 5’, 6’ LENGTHS (PRICED PER 1’ EXTENSION) 7 1/2 HP SUMITOMO GEAR MOTOR NO. 80 DRIVE CHAIN AND SPROCKETS INTEGRATED LASER CUT STEEL SUPPORT FRAME PILLOW BLOCK ROLLER BEARINGS STRUCTURAL STEEL FRAME 114’ PER MINUTE FIXED WORKING SPEED *12” diameter roller may not meet TPI specifications, based on a single pass system. Please check your local code.
CONTACT SALES@SQ-1DESIGN.COM SALES@SQ-1DESIGN.COM
866 647 7771
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
TRUSS EQUIPMENT
IST AUTOMATIC TRUSS STACKER IMPROVE PRODUCTION FROM YOUR ASSEMBLY LINES Saves labor and helps reduce injuries Will stack any Truss 16’ to 80’ in length and 14’ in height Standard capacity is 30 trusses Average stacking cycle is 40 seconds Bundle indexes 1-1/2” as each truss is stacked Electric-mechanical controls and drive system operate in all weather Automatic and manual controls are standard
Give us a call and we can quote a system that will work for your operation. Or visit our website to see our other production equipment. 1-517-323-1996 Office | Ed’s cell 1-517-285-4838 | www.integratedstealth.com TRUSS EQUIPMENT
TRUSS EQUIPMENT
Mitek 14' x 24" Diameter Finish Roller including 12 Truss Rollers. $11,250.00 FOB MT. Wasserman & Associates 800-382-0329
e n ic io r t P uc ed R
Integrated Stealth Technology Roof Truss Equipment
• • • • • • •
Adverti$er
Eagle TP600 C-Clamp Roof Truss Press 1 1/8 HP / 230 Volt / 1 Phase Motor & Pump. 5 1/4" x 6 1/4" Platen. 11 1/4" Throat. Includes Boom & Trolley. Excludes Overhead Beam & Jig Table. $5,900 NOW $5,500 FOB NC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
June 1st, 2014 #07179 Page #18 TRUSS EQUIPMENT
2005 Koskovich Jet-Set 23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990
Custom Floor Truss Splicer Hydraulic floor truss chord splicer system splices 2x4 chords for floor-truss operation with maximum plate size of 3" X 10". Dual hand controls allow for safer operation. 10' infeed/20' out-feed conveyors. 10HP motor with integrated hydraulic reservoir. 208v, 3ph, 60Hz (multi voltage Baldor motor). Price: $7,800 :: FOB NC PENDING Wood Truss Systems 765-751-9990
New Website Offers Mobile Friendly Interface! The website includes a product explorer which will allow you to search for specific equipment from the over 150 new & used products available. The listings will be comprehensive with great detail, many photos and an occasional video. Our goal is to provide the best resource in the industry for making profitable equipment selections for your company.
e n ic io r t P uc ed R Alpine Rollmaster 94' Roof Truss Gantry Alpine Rollmaster roof truss gantry, 14' x 94' working length. Includes (1) 18" x 14' gantry head with mast, (12) 6' wide, drilled/tapped steel tables with skate-wheel ejectors, (16) idler rollers, (12) receivers, all available hardware, track and electrical s/o cord. Rand 24" x 14' -6" final roller press can be purchased separately for $12,720. 440V 3phase electrical. $20,690 NOW $12,890 FOB NV. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
Alpine Rollmaster 100' Roof Truss Gantry Alpine Rollmaster roof truss gantry, 14' x 100' working length. Includes (1) 18" x 14' gantry head with mast, (13) 6' wide, drilled/tapped steel tables with skate-wheel ejectors, (17) idler rollers, (13) receivers, all available hardware, track and electrical s/o cord. Alpine 24" x 15'-6" final roller press can be purchased separately for $17,490. 440V 3phase electrical. $27,890 NOW $21,890 FOB NV. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Toll Free 800-382-0329
www.wasserman-associates.com
NEW Monet DeSauw 12’ x 16’ Framing Table with Programmable Single Tool Panel Bridge
$58,000 FOB MO Includes Installation Support in the United States & Canada
• Stud Locators at 16" & 24" O.C. OPTIONS • Pop-up Skatewheel Conveyor • Add $1,750 for Handle Bar • Powered Height Adjustment (8' Router • Add $1,250 for Wall Panel Lift to 12' wall heights) (Excluding Hoist) • Adjustable Squaring Stops • Add $1,500 for 1 Pair of 15' • Excludes Tool Dollies ® Skatewheel Conveyor with PANEL BRIDGE Stands ™ drop-in Channels • Programmable Fastener Patterns• Add $3,750® for Sub-Component Old technology turned state-of-the-art with WizardPDS drop-in Channels™ with PLC Touch Pad Entry Layup Tables Your table + our technology = Zero Set up time and NO manual jigging. • Click on Photo 7 for Video
WizardPDS
the Video Here Retro fit nowWatch - own it in 6 months!
http://www.wasserman-associates.com/images/Item_Photos/MDProgrammableBridge1.MOV?PHPSESSID=76ucbqov4862721kdv69qn7hd6 Page 19
Component Manufacturing Advertiser
June 1st, 2014
M ACdverti$er omponent
anufacturing
June 1st, 2014 #07179 Page #20
Don’t Forget! You Saw it in the
Adverti$er
2003 Klaisler 14’x24” Finish Roller
Integrated Stealth Technology Roof Truss Equipment Side Eject or End Off Trackless Truss System We have complete Roof Truss Systems. End-Off Systems or Side Eject Systems customized to whatever your plant needs may be. These are Steel Slotted Tables that come to you Auto-Plank ready so when you decide the time is right we just need to send the components to install on the plank and plug the wires in and you’re ready to go.
2003 Klaisler Finish Roller Model 14’x24” / SN T14121GR24TR24593P3 480 Volts 3 Phase. (2) Drive Motors
14’ Systems in Crane rail or Trackless Gantries in Stock
Bought New in 2003
Aisle ways or full table top.
One Owner / Used Inside Building
Side- ejects or End-off design All Truss Systems are turn-key Auto-Jigging quoted as an option with all systems. Let us Custom Design a Truss System to fit your needs today! 1-517-323-1996 Office | Ed’s cell 1-517-285-4838 | www.integratedstealth.com
Excellent Condition
FOB GA $12,500 www.salter.com
www.mitek-usa.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
Adverti$er
June 1st, 2014 #07179 Page #21
Updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com
May Lumber Market Analysis By Keta Kosman Publisher, Madison's Lumber Reporter May 28, 2014
Generally speaking, prices of North American dimension lumber and panel products have found a floor for this year’s home building and renovation season. There continue to be relatively minor fluctuations in specialty products like Douglas fir, and in panel. This is nothing resembling the volatility of last year, with $100 swings in both directions twice over the course of a year. The price of benchmark lumber commodity WSPF KD 2x4 &2&Btr remained level for the second half of May, at US$346 per thousand board feet (mfbm) [net FOB mill]. This is $2 higher than one month ago, at US$344 mfbm, and $20, or 5.8
per cent, higher than US$326 mfbm for the same time in 2013. Both US and Canadian lumber traders reported limp preholiday demand, which does not bode well for post-Memorial Day long weekend in the US. Usually this event marks the beginning of annual ‘honey-do’ lists for DIY, home improvements, and renovations. The next couple of weeks of wood price trends will indicate whether secondary suppliers and large retailers sold good volumes. A further depressed lumber futures board did nothing to improve sentiment this week, however that financial hedge has been exceeding bearish for the past many years. The inside word with forest product industry players this year is that hot US remodelling and DIY activity, as well as continued stable demand for industrials, are keeping North American lumber supplies lean. Many agree that — barring an extreme circumstance — lumber manufacturing volumes have stabilized and solid wood prices have found a floor. A noticeable stocking-up by major lumber wholesalers and the big box stores about a month and a half ago had lumber traders buzzing about positive numbers for US building and renovations this year. The US Memorial Day holiday is acknowledged as the unofficial start to summer holidays and outdoor housework. The following couple of weeks’ retail lumber sales will provide indication of lumber demand for the rest of this season.
Madison’s Announces . . .
We have completed our annual update of Madison’s Online Lumber Directory! Don’t miss out on this valuable information resource, freshly researched and updated. The new data is being installed on the website, as an online subscription. Get instantly connected with the Canadian solid wood and pulp and paper products industries!
MADISON'S LUMBER REPORTER KEY PRICES WEEK OF 05/23 To be published in this week's issue of Madison's Lumber Reporter: WSPF KD R/L 2x4 #2&Btr . . . $346 +0 WSPF KD R/L 2x6 #2&Btr . . . $332 +0 WSPF KD R/L 2x8 #2&Btr . . . $347 +4 WSPF KD R/L 2x10 #2&Btr . . . $480 +0 WSPF KD PET 2x4 Studs . . . $325 +5 Douglas Fir green #2&Btr 2x4 . . . $320 -15 D o u g l a s F i r g r e e n # 2 & B t r 2 x 1 0 . . . $ 3 7 0 - 1 0 ESPF KD 2x4 8ft Studs . . . . . . . $427 +7 OSB ON 7/16" (C$/1000 sq ft) . . . $245 +5
Each of the more than 1,600 listings detail: locations; contact names/titles; websites and emails; species handled; rough and surfaced sizes; product mix; dry kiln and production capacities; countries of export; grading agency & mill number; plus much more.
Contact our office any time to sign up today! Follow us on Twitter! https://twitter.com/LumberNews
all prices FOB mill, US$ per thousand board feet *except OSB which is C$ per thousand square feet
Keta Kosman - Publisher Madison's Lumber Reporter Madison's Timber Preview Madison's Investment Rx 604 984-6838 www.madisonsreport.com
Sign Up for Weekly Price Updates at www.madisonsreport.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TECHNICAL SPECS 3000 Lineal feet production per 8
June 1st, 2014 #07179 Page #22
Informa-Don’t Forget!Adverti$er You Saw it in the
MangoTech Plate Marker System
hour shift
Extremely easy to use, the
Standard infeed table speed
MangoTech Platemarker
240’/min (can be increased)
System can be retrofitted to pull
Number of operators: 1
o r u n d e r c u t s a ws , o r s u p p l i e d
Marks top and bottom sill plates
wit h t he M ango Apollo Sa w
Cut and mark 2x3-2x6 on edge,
The desired wall file to be cut and
2x8-2x12 flat
marked is selected from the file
Cuts all wall pieces
loading screen.
Allows manual input 10 degree min. angle cut
The plates are placed on the saw
Smallest length cut: No
bench and cut to length. If the saw
minimum
is fitted with angulation, the angles
Largest length cut: 21’6” (Can be
will set automatically.
extended by extending length
Once the plates are cut, the
stop
length stop will automatically reset
Length of delay to mark board:
for marking.
1/2 sec (can be adjusted)
After making the first mark, the length stop will feed the plates SOFTWARE SPECS
forward to the next marking position
Compatible file formats:
on an adjustable time delay. This is repeated for the length of the wall.
.trs, .mdf, .mwf, .xml, .hay/hfs, .gwf, .tx
Cutting and marking order can be
Tech service agreement
filtered and batched to be cut for
available
efficiency and to suit each plant’s needs.
AUTOMATED SOLUTIONS FOR WALL AND ROOF TRUSSES
ADDITIONAL BENEFITS Can cut truss members w i t h t r u s s s o f t wa r e Can view each member on the screen as it’s marked and cut Considerable labor sav ings
PHONE: 800-289-5627
CONTACT SALES@MANGOTECH.COM.AU CONTACT SALES@MANGOTECH.COM.AU 1866GOMANGO Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
WALL PANEL EQUIPMENT
WALL PANEL EQUIPMENT
Wright Panel Lift and Hoist Assembly (Bridge Crane Assembly) Wright lift and hoist assembly . Includes (2) 1.5 HP trolley motors, (4) 500 lb. capacity hoists, capacity (1) ton. Was used for transferring wall panels to 12 feet in height. Distance between the hoists is 13'-6" x 8'-0", the travel distance is 50 feet and the vertical travel distance is 15 feet. See video for demonstration. 220 volt, 3 phase electrical. Price: $9,990 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Basic Automation 12' x 16' Interior/Exterior Wall Panel Line Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge. Includes (25) Senco Staple Guns. $9,900 FOB GA. Wasserman & Associates 800-382-0329
NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329
2005 IBS Wall Panel Line Framing table with light bar and gun mounted laser, (3) monitors with fiber optic hub, squaring table, sub-component table and sub-component nailer. Also includes a nail/sheath/multi-bridge with 5 degree tilt feature and (28) bostich gun tool mounts, panel lift, (2) tool dollies, and hand-held router. Builds maximum length of 16' 8" and 12' height. 120 PSI air, 208/230v, 3 ph power required. Price: $49,490. FOB NB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
Adverti$er
June 1st, 2014 #07179 Page #23
Panel Clip TK-7 C-Clamp Truss Presses •10 Ton C-Clamp Press •Platen Sizes from 4” x 5” to 5 1/2” to 6 1/4” •110 Volt Motor & Pump •Includes Boom & Trolley •Excludes Overhead Beam & Jig Table •3 Roof Truss Presses Available •1 Roof & Floor Truss Press Available Price is $5,000 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com TRUCKS & TRAILERS
1999 Haulin Gooseneck Roll-Off Trailer •8’ Gooseneck + 4’ Fixed Platform + 26’ Tilt Roller Bed + 2’ Tail •Hydraulic Tilt Bed •6” Rollers •Steel Plate Between Rollers •Tandem Axle (4 Tires per Axle) •GVWR: 26,000 Lbs •Approximate Trailer Weight: 8,600 Lbs •Needs New Brakes and Has Leaky Hydraulic Cylinder $8,900 FOB CO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com
www.panplus.com FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TRUCKS & TRAILERS
Lakeside 30'- 45' Mini Stretch Roll Off Trailer Price: $7,890 :: FOB IN Condition: Good Category: Trailers and Rolling Stock Description: Single axle trailer, features anti-lock brakes, tongue connection, locking, controllable rollers and hydraulic lift neck. Stretches from 30’ to 45’. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Advertiser Trivia
It occurs Once in a minute Twice in a week and once in a year what is it? Answers on page 35
Don’t Forget! You Saw it in the TRUCKS & TRAILERS
Load Lifter T-40 Yard Carrier •The T-40 Modular Yard Carrier can easily move a modular building off your production line to your staging area in minutes •50,000 Lb Capacity •70' Main Rail Length (78'-6" Overall Length) •20" Vertical Lift •18 HP Gas Engine Power Unit for All Hydraulics •Rear Lift: Six 5 x 20 Cylinders •Pintle Hitch Coupler •Running Gear: Six 20,000 Lb Heavy Duty Agricultural Spindles & Hubs FOB NE:: $19,500. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Adverti$er Are You Paying 60% Interests on Your Lumber Purchases?
June 1st, 2014 #07179 Page #24
It is perplexing why most small to midsized truss plants [as well as dealers, treaters, reman’s] put all their lumber buying eggs in such a small basket. Lumber is 50% of their costs and many, if not most of them buy from brokers rather than mills, due to cash flow. They cannot, or choose not, to pay mill terms for discount, 1%10 ADI, and mills don’t want to sell net 30 customers. Instead, buyers pay a broker 4-5% to use them as a bank. That is 5% every time they buy, not annually. 5% on the same $100,000 line of credit that revolves in 30 days. That is 60% annually...$60,000 per year interest. Even if partnering with an investor and generously paying a 15% ROI they could save $45,000 per year for every broker that gives them $100k line. And, multiple brokers are required because $100,000 only buys 10 trucks per month. That is assuming you find a generous, risk taking broker. The reason a broker makes 5% margin on net 30 accounts is statistically speaking, they are high risk for becoming 45-day receivables which are negative cash flow businesses. 45-day receivables are even higher risk for becoming 60-day receivables which is a giant step towards insolvency. It’s all about protecting for a worst case scenario. The only escape is discounting your invoices.
Nobody’s better equipped
to help you
There is another course of action. Squeeze the market by working the volatility. For example, 2x4 #2 prices change an average of 2.18% per week. Many weeks prices don’t change, which means when they do move it is often more like 3% weekly. $10-15/mbft. Anticipating those moves, up or down reduces your lumber costs.
be better equipped too.
Here is a perfect example. Memorial Day through July 4th is the weakest lumber market of the year. Prices will likely fall 10-15% over the next four weeks. Buying on Friday each week, after “print” will get you lower prices. Delaying for two weeks could likely save 5%. That is $15-20 per thousand...$350-400 per truckload.
Making sure you have the right equipment for your needs is something we’ve been doing for nearly 30 years. We have the experience, industry contacts, and broad-scope thinking to help you be more productive, more efficient, and more profitable.
So riddle me this...Why doesn’t every lumber buyer care about that? Why do so many lumber businesses pay 60% annual interest in lieu of taking on an investor? Why do so many lumber businesses ignore the predictable, repeating lumber market cycles that DO reduce lumber costs?
www.WoodTrussSystems.com www.WoodTrussSystems.com • 765-751-9990
Looking Forward ...ml
Layman's Lumber Guide Lumber Market Intelligence Lumber Market Forecast Since 1985 Matt Layman, Publisher Phone or Text Msg: 336-516-6684 Fax: 888-811-6917 http://www.laymansguide.org/
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
omponent
anufacturing
TRUCKS & TRAILERS
2009 EnDiSys / Graco Foam Insulation System •EnDiSys Model 3004240B •Skid Mounted Graco Reactor H-25 Hydraulic, Heated, Plural Component Proportioner •Maximum Flow Rate: 22 Lb/Min •Maximum Fluid Working Pressure: 2,000 PSI •Reactor Portable Dispense System (Manual Contol) •230 Volt / 3 Phase •Two 100 Gallon Heated Tanks •Drum Agitators (Both Sides) •Feed Pumps •Recirculation System for Hose and Reactor •150’ Heated Hose with 10’ Whip •Out of Service (Stored Inside) $19,500 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com
n
e ic io r t P uc ed R 2008 40' Gooseneck Roll-Off Trailer Location: NC. NOW $10,900 -40' Trailer hauls up to 60' Trusses -Tandem 7,000 Lb Axles Wasserman & Associates 800-382-0329
1994 36' Gooseneck Trailer Price: $4,890 :: FOB TX 1994 Oklahoma Gooseneck Manufacturing, 36' tandem axle gooseneck trailer with electric drum brakes, indicator lights, and 13/32 to 13/64 tread depth, integrated, manual "landing-gear". 20,000 lbs. load rating. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
Don’t Forget! You Saw it in the
Adverti$er
TRUCKS & TRAILERS
1999 JDH Trussmaster 36’-51’ Stretch Roll-Off Trailer •Hydraulic Front End •Roller Brakes $9,900 FOB KS Wasserman & Associates 800-382-0329 www.wassermanassociates.com
MISC.
MISC.
2008 OMGA Finger Jointing Line Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, and OMGA INK F-100 glue station, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power. Price: $29,900 $24,900 :: FOB CO Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Load Lifter T-40 Yard Carrier •The T-40 Modular Yard Carrier can easily move a modular building off your production line to your staging area in minutes •50,000 Lb Capacity •70' Main Rail Length (78'-6" Overall Length) •20" Vertical Lift •18 HP Gas Engine Power Unit for All Hydraulics •Rear Lift: Six 5 x 20 Cylinders •Pintle Hitch Coupler •Running Gear: Six 20,000 Lb Heavy Duty Agricultural Spindles & Hubs FOB NE:: $19,500. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Advertiser Trivia
The 3-4-5 right-triangle rule is “a triangle with sides in the proportion of 3,4,and 5 (inches, feet, or any other measure) will always be a right-triangle, forming a 90-degree corner... • • • •
where the “3” and “4” sides meet where the “3” and “5” sides meet where the “4” and “5” sides meet Depends on the fractional dimention
Answers on page 35
800-382-0329 2006 Semmler "Big Red II" Column Fabricator
R P ed r u ice ct io n
M ACdverti$er
June 1st, 2014 #07179 Page #25
MISC.
IBS Sub-Component Nailer •Clamps lumber up to 15” wide x 13” high. •All clamping positions are adjustable. •Can nail headers from both sides. •End stop assures pieces are flush •120 Volt / 1 Phase. •Checked and sold in working condition. •Excludes: Nail Guns, Tool Mounts, Trigger Pulls & Infeed/Oufeed Roller Conveyor. $4,900 FOB NE. Wasserman & Associates 800-382-0329
$89,000 FOB ND NOW $84,000
Automated Column Fabricating Machine. Assemble 3 or 4 plies of 2x6 or 2x8 lumber up to 40'. Mechanical Caddy applies Side & Down Pressure while nailing column with 4 Nail Guns. Pop-up Conveyor on Assembly Table. Inline Gusset Press. Inline Column Planer with Dust Collector (excludes hopper). Outfeed Conveyor, Push Off Cylinders & Cart for Column Stacking & Banding. 2 Banding Carts
www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
FOR SOME GUYS, IT’S FAST CARS. FOR OTHERS, IT’S BEAUTIFUL WOMEN. FOR US, IT’S LASER-GUIDED LUMBER RETRIEVAL.
Our WoodRunner™ lumber retrieval system not only reduces labor by a half over manual saw feeding, it increases productivity by 30%. And, it’s compatible with any new or existing linear saw. Now, who wouldn’t be a little passionate about all that? Visit www.apexmw.com www.apexmw.com or call 507-322-3700 to learn more today.
Page 26
Component Manufacturing Advertiser
June 1st, 2014
M ACdverti$er omponent
anufacturing
MISC.
Don’t Forget! You Saw it in the MISC.
Adverti$er MISC.
June 1st, 2014 #07179 Page #27 Door & Stair
Wood Truss Systems
inc.
MANUFACTURERS’ REPRESENTATIVES
Refurbished 2005 Hain 20Ft. Measuring System 2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.
$22,677 FOB FL | AS NEW 2010 Polar Air Rotary Screw Compressor, Dryer & Tank 20 HP rotary screw compressor with refrigerated dryer and 120 gallon storage tank included. 208/230v power. Price: $8,490 :: FOB NB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $14,250. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
765-751-9990
www.woodtrusssystems.com
Palatek 25 HP Rotary Screw Air Compressor with Atlas Copco Air Dryer -Palatek Model 25D4 Air Compressor -25 HP Motor (230/460 Volt-3 Phase) -95 CFM at 125 PSI -13,111 Hours on Air Compressor -2007 Atlas Copco Model FX Refrigerated Air Dryer (115 Volt-1 Phase) -Air Storage Tank $6,000 FOB KS. Wasserman & Associates 800-382-0329
2008 OMGA Finger Jointing Line Price: $29,900 :: FOB CO Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, OMGA INK F-100 glue station, and TITEN finish planer of unknown age, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2008 AeroGo Load Beams Air Caster Load Beams (for moving modular home sections). Two Aero-Caster Load Modules connected by an Adjustable Telescopic Tube. Lightly Used (Once or Twice). Capacity: 7 Ton Each. 36 Load Beams Available. $50,000 for all or $1,700 each. FOB AL. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2002 Builders Automation Template Stair Router •Model RUWO 2000 MFSR •Cut Box and Open Stringers •Manual Setup with Auto Feed and Cut •One or Two Stringers per Cycle •10’ Infeed and 10’ Outfeed Roller Conveyor with Stands •2 Bag Dust Collector •(2) Lift Tables for Staircase Assembly •240 Volt / 3 Phase Price: $25,600 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
Norfield Vertical Door Loader -2,800 Lb Capacity -48" Stack Height -480 Volt / 3 Phase Location: TX Price: $7,900.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Norfield Pro Door Machine with Door Cut-Off Saw Norfield Pro Door & Jamb Machine Width: Doors to 3-0, Jambs to 10 1/2” Height: Doors to 7-0, Jambs to 7-0 Thickness: Doors to 1 3/4”, Jambs to 1 1/8” Butt Sizes to 4” x 4” Butt Spacing: Infinitely Variable Lock Backsets from 2 3/8” to 5” 230 Volt/3 Phase/ 50 Amp and 230 Volt/1 Phase/20 Amps Norfield Model 3600 Door Cut-Off Saw Maximum Door Width: 4-0 Maximum Door Length: 9-0 Maximum Door Thickness: 2 1/4” Saw Blades: 2 at 8” 230 Volt/1 Phase/20 Amp/5.5 HP $6,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Advertiser Trivia
How thick must a piece of lumber measure to be considered timber? • at least 4” • 6” • 8” • Over 8” Answers on page 35 FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
JobLine.com, inc.
The
800-289-JOBS
email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
Truss Designer - Intermediate Location: South Small but growing truss plant producing single family residential roof trusses is looking to hire 1-2 intermediate level truss designers. The ideal candidate will have MiTek Sapphire experience, have WTCA I or II rating, or be ranked intermediate or above by JobLine. Compensation: $45-55k+- based on experience. Relocation assistance is available. ID: J10568 Senior Designer- Truss Location: KY Products include floor and roof trusses, I-Joists, wall panels, MiTek. Panel experience is a plus! JobLine Senior Designer rating is preferred Thom's Notes: One of my "A" list employers, great benefits, competitive compensation. When I place someone there, they stick! Very tight specifications for this employer. Relocation assistance is available. ID: J10630
Don’t Forget! You Saw it in the
Adverti$er
Hiring Zone - Available jobs Senior Designer- Truss Senior Designer - Truss/Panel/EWP Location: South Location: Canada Products include floor and roof trusses, Responsibilities: Design of roof and floor I-Joists, wall panels, MiTek. Panel systems using wood trusses, i-joists and experience is a plus! JobLine Senior pre-engineered wood beams for residential, Designer rating is preferred. $50-70k DOE. commercial and agricultural construction. Prepare drawings for manufacturing and Thom's Notes: One of my "A" list employers, erecting wood building components. great benefits, competitive compensation. Provide technical support to customers, When I place someone there, they stick! production and sales staff. ID: J10416 Very tight specifications for this employer. Canadian Candidates Only Relocation assistance is available. Review/Optimizing - Truss ID: J10582 Location: Texas This is a great position to advance toward Senior Designer - Truss a Truss Designer position. The employer Location: Florida is looking for someone to do review, MiTek Sapphire and AutoCAD software optimizing, and advance to a truss designer experience preferred. JobLine certified role. The ideal candidate will have 1-3 Senior Designer rating strongly preferred. years of Review/Optimizing experience, Employment history must demonstrate MiTek software preferred, and be detail progressive advancement, stability, and oriented and willing to work in a fast paced strong skills in multi family design. No job environment. Excellent opportunities hoppers. We have specific instructions on for advancement, great benefits, stable what type of candidate they will accept, and company. The company looks for people we will be closely screening candidates for in this position to advance rapidly to a full this opportunity. Priority is multifamily and Designer position. Usually within 6-12 commercial experience. months of training on Multifamily and their systems. Compensation: $20-29hr. plus OT, 45 hrs+. Compensation: $16-25 hr plus overtime, Full benefits program. Relocation assistance depending upon skills and experience. ID: is negotiable. Candidates from the Southeast J10557. are preferred. ID: J10570 Production/Plant Manager - Truss Truss Designer Location: South Location: Central US We are looking for a large facility, high Our client, a multi-location lumber yard, volume, multi shift Truss Production pro-dealer, and truss manufacturer is seeking Manager. The ideal candidate will have a truss designer with MiTek Sapphire experienced with large Multi Family and software. The ideal candidate will have commercial roof and floor truss projects. both floor and roof truss as well as single Truss experience required, panel experience and multifamily experience. Average work is a plus. Bi-lingual English/Spanish desired week is 40 hours. but not required. Must be aggressive, hands Compensation: $40-60k in a very low cost on, and a get the job done type of person. of living, family friendly area. Relocation assistance is negotiable. If you are logged Compensation: $60-90k++ Depending in and see this job, it is in an area you have upon experience and ability. Relocation listed in your relocation preferences. assistance is available. ID: J10563. ID: J10595
FitzGroup.com PHONE: 800-289-5627
June 1st, 2014 #07179 Page #28 Senior Designer/Design Supervisor Location: Central Canada We have a unique opportunity for Design Professionals who are avid outdoors enthusiasts. This truss and wall panel employer is located in Rural Saskatchewan, Canada and offers a family focused location that is perfect for raising kids and living a rural lifestyle. This is a great opportunity for Midwestern and upper Midwestern candidates. The job entails the usual working Design Manager's role. Designing, checking, supervising, training, planning, reporting, etc. At $8M this is not a small operation. The ideal candidate will have some supervisory experience as well as commercial and multifamily. They also do a good bit of single family and AG projects too. Software is Alpine but the employer will consider other truss software experience. Pay is very good compared to the cost of living. Relocation assistance is negotiable. US candidates must meet NAFTA requirements. Message me for additional details. ID: J10588 Cutting/Optimizing - Truss Location: Texas This is a position to advance toward a Truss Designer position. Start with optimizing, cutting, and production documents, and advance to a Senior Truss Designer role over 1-2 years. The ideal candidate will have 1-3 years of design/cutting experience, MiTek software preferred, and be detail oriented and willing to work in a fast paced environment. Excellent opportunities for advancement, great benefits, stable company. Compensation: $16-25 hr plus overtime, depending upon skills and experience. ID: J10632
RFitzgerald@FitzGroup.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
CFO/Controller - Truss Location: South/Southwest Summary: Directs the organization's financial planning and accounting practices as well as its relationship with lending institutions, owners, and the financial community by performing the following duties personally or through subordinates. Oversees and directs treasury, budgeting, audit, tax, accounting, purchasing, real estate, long range forecasting, and insurance activities for the organization. Responsible for procedures and computer application systems necessary to maintain proper records and to afford adequate accounting controls and services. Appraises the organization's financial position and issues periodic reports on organization's financial stability, liquidity, and growth. Directs and coordinates the establishment of budget programs. Coordinates tax reporting programs. Analyzes, consolidates, and directs all cost accounting procedures together with other statistical and routine reports. Directs and analyzes studies of general economic, business, and financial conditions and their impact on the organization's policies and operations. Analyzes operational issues impacting individual locations and the entire company, and determines their financial impact. Evaluates and recommends business partnering opportunities. Establishes and maintains contacts with stockholders, financial institutions, and the investment community. Education and/or Experience: Four-year college or university degree in finance or accounting; Certified Public Accountant (not required but a plus); five plus years experience. Experience with multiple manufacturing locations is preferred. Manages subordinate employees in Accounting, IT, Credit and Billing. Is responsible for the overall direction, coordination, and evaluation of these units. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. ID: J10622 Attention Employers We have over 1,000 registered Industry Professionals. All Job Searches are not public! We can search behind the scenes to find the right candidate for your opportunity. See what I can do for you! Thomas McAnally PHONE: 800-289-5627
June 1st, 2014 #07179 Page #29
Don’t Forget! You Saw it in the
Adverti$er
Hiring Zone - Available jobs Senior Estimator - Truss/EWP/MF Remote Wall Panel Designer - MiTek Location: Texas Location: Remote Primary duties include estimating, job This is a unique opportunity and targets a books, bid creation and working closely specific group of candidates. with Sales, Customers, Architects, EnWe have been retained by a leading remote gineers, and Code Officials as well as design firm to find wall panel designers, Design, Production and internal departincluding those whom have been out of ments. Must have excellent communicathe design job for several years. The ideal tions skills Truss design skills are a strong candidate will have MiTek experience, plus. JobLine Senior Designer certification Sapphire experience is not required, is preferred. but other panel software experience is acceptable as long as you are willing to Skills required include MiTek software, learn Sapphire. Needs to have 4+ years (Sapphire preferred) will consider equal of experience designing wall panels in the brand experience, math skills, and bluelast 10 years. print reading. Components include: floor There is no charge for training and trusses, roof trusses, and framing compoexpenses including software. To be nents. Markets must include multi family. considered, you must provide a computer capable of running MiTek Sapphire and Compensation: Base from $20-28hr + a broad band internet connection. If OT, averaging 45 hrs, depending upon you need to have a training period, there experience and ability. Benefits include: is a reduction in compensation based Medical, Dental, Vision, 401K and/or on billable hours, but once you have other retirement programs, profit sharing, completed the training period, and you pass and detailed benefits plan - see Company a competency evaluation, compensation Profile. Relocation is acceptable with can increase to $25-50 per billable hour reasonable expenses paid and open to based on the role and responsibility. This negotiation. is a contract position. Please inquire for ID: J10578 additional information. ID: J10621
Senior Designer - Truss Location: Southeast MiTek Sapphire and AutoCAD software experience preferred. JobLine certified Senior Designer rating strongly preferred. Employment history must demonstrate progressive advancement, stability, and strong skills in multi family design. No job hoppers. We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. Priority is multifamily and commercial experience. Compensation: $20-27hr. plus OT, 45 hrs+. Full benefits program. Relocation assistance is negotiable. Candidates from the Southeast are preferred. ID: J10537
Designer - Truss/EWP/I-Joists Location: South Our client is looking for a truss designer with MiTek Sapphire experience, MiTek prior versions are also acceptable. The ideal candidate will have tested using the JobLine Truss Design Skills Evaluation and scored in the $80+ range. Mostly single family custom with some smaller multifamily projects. Compensation: $40-60k plus benefits. Relocation Assistance is negotiable. Pay based on 40 hours a week. More hours available if desired. Ask for details. ID: J10619
Outside Sales - Truss/Multifamily Location: Midwest One of our clients in the Midwest is looking for a seasoned outside sales specialist with experience selling trusses to lumber yards. They are looking for someone with 4+ years selling single Senior Designer - Truss and multifamily projects and at least a Location: North Carolina working understanding of the estimating MiTek Sapphire and AutoCAD software process using MiTek Sapphire or equal. experience preferred. JobLine certified They have an estimating department Senior Designer rating strongly preferred. but want the sales rep to know how to Employment history must demonstrate bring the project to estimating. They progressive advancement, stability, and will pay additional for doing some or strong skills in multi family design. No all of the estimating up front. These job hoppers. We have specific instrucdetails are still being developed and may tions on what type of candidate they will not be something they communicate to accept, and we will be closely screening us so please inquire to be considered. candidates for this opportunity. Priority is We will only consider candidates with multifamily and commercial experience. the experience mentioned above and a career that is primarily sales focused. Compensation: $20-29hr. plus OT, 45 Relocation assistance will be considered hrs+. Full benefits program. Relocation for candidates living in the central US. assistance is negotiable. Candidates from Candidates on the coasts may not be conthe Southeast are preferred. sidered unless they have prior Midwest ID: J10571 experience. ID: J10542 Read/Subscribe online at www.componentadvertiser.com
JobLine.com, inc.
The
800-289-JOBS
email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
Catch us on thejobline.com
Senior Designer Truss/Panel/I-Joist/EWP Location: Canada I am looking for a high energy Senior Designer with experience supporting a very large plant using RANDEK and/or WoodRunner equipment. Someone who understands all aspects of truss, panel, I-Joist, and EWP design. Commercial experience is a plus! Experience required: 5+ years in component design plus JobLine skills evaluation above 90. Primary duties include design/layout, reviewing other's work, optimization, and cutting. Secondary duties include customer service and interaction with other departments. Must be willing to be proactive in supporting production, sales and administration. Technical skills required include MiTek software, AutoCAD, will consider equal brand experience, producing production documents to support RANDEK and WoodRunner equipment, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware. Benefits, company culture, and advancement opportunities are what makes this employer attractive. Compensation: Salary from $85k+ CN depending upon experience and performance. Relocation assistance is open to negotiation. Thom's Notes: If you are a US Citizen, the employer will also consider your application if you have a 2 year degree in an architectural or design field and 3 years of experience. ID: J10612 FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
JobLine.com, inc.
The
800-289-JOBS
email: thom@thejobline.com or call Thomas McAnally for Personalized Service 800-289-5627 x 1 STRICTLY CONFIDENTIAL!
Designer/Plant Manager in Training Location: South We are looking for a Designer with potential to train as a Plant Manager. The ideal candidate will have Intermediate to Advanced Truss Design skills as well as experience in production. Software is ITW/Alpine but other software experience will be considered. Relocation assistance is negotiable. Send me a message for more information. Compensation: Starting compensation in the $45-60k+ range with upside potential of $75-90k+. ID: J10611
Senior Designer - Truss/Multifamily Location: Mid-Atlantic This is not our typical Senior Designer job opportunity. "A" list employer, very stable, great benefits. MiTek software experience preferred. JobLine certified Senior Designer rating strongly preferred. Employment history must demonstrate progressive advancement, stability, and strong skills in multi family design. No job hoppers. We have specific instructions on what type of candidate they will accept, and we will be closely screening candidates for this opportunity. Priority is multifamily and commercial experience. Compensation: Senior Designers can make $65-80's+. Reviews are annual and your ability and value will be rewarded. Benefits include: Medical, Dental, Vision, 401K and/or other retirement programs, profit sharing, and detailed benefits plan - see Company Profile. Relocation is acceptable and expenses are open to negotiation for the right candidate. The lower your relocation cost are, the better. Other considerations: a Non-Smoking facility, and EOE (Equal Opportunity Employer). ID: J10575 PHONE: 800-289-5627
Don’t Forget! You Saw it in the
Adverti$er
Hiring Zone - Available Jobs Designer - Roof/Floor Truss Production Manager 2nd Shift - Truss Location: South Location: Colorado This search is for an Intermediate Level $8-10M manufacturing operation building Truss Designer with MiTek Sapphire roof and floor trusses has a management experience. They may consider other opportunity available. The ideal candidate software experience depending on your will be experienced in production, willing skill level. Projects include roof and floor to work 2nd shift and be a self starter. Skills trusses for Single Family, SF Custom, and will include all aspects of the manufacturing light Multifamily (Townhomes). This is a process, equipment, and MiTek MBA. salaried position and works 40 hours a week. Relocation assistance is negotiable for the Reporting to the GM, the Production right candidate. Manager / 2nd shift is responsible for Txt: J10604 to 406-210-1226 meeting production, labor and quality or call 800-289-5627 x1 standards. This is a key role in the company and requires someone who is trustworthy, Review/Optimizing - Truss independent, and looking for advancement. Location: Texas This is a great position to advance toward Compensation: $50's to $60's+ based on a Truss Designer position or to regain lost experience and ability. skills. The employer is looking for someone ID: J10618 to do reviewing, optimizing, cutting, and production documents, and advance to a truss designer role over 1-2 years. The Senior Designer ideal candidate will have 1-3 years of Truss/Panel/I-Joist/EWP design/cutting experience, MiTek software Location: Arizona preferred. Must be detail oriented and able I am looking for a high energy Senior to work in a fast paced environment. Designer. Someone who understands all aspects of truss, panel, I-Joist, and EWP Excellent opportunities for advancement, design. Commercial experience is a plus! great benefits, stable company. Experience required: 5+ years in component design plus JobLine skills evaluation Compensation: $16-20 hr. plus OT, 45 hours above 90. Primary duties include design, average per week, depending upon skills review, optimization, problem solving. and experience. Relocation assistance is Secondary duties include customer service available. and interaction with other departments. Must ID: J10547 be willing to be proactive in supporting production, sales and administration. Senior Designer - Truss Technical skills required include MiTek Location: Colorado MiTek Sapphire and AutoCAD software software, AutoCAD, will consider equal experience preferred. JobLine certified brand experience, math skills, and blueprint Senior Designer rating strongly preferred. reading. Components include: floor trusses, Employment history must demonstrate roof trusses, framing components, I-joists, progressive advancement, stability, and EWP, hardware. strong skills in multi family design. No job hoppers. We have specific instructions on Compensation: Salary from $70-72+ what type of candidate they will accept, and depending upon experience and performance. we will be closely screening candidates for Relocation is open to negotiation. this opportunity. Priority is multifamily and ID: J10616 commercial experience. Compensation: $20-29hr. plus OT, 45 hrs+. Full benefits program. Relocation assistance is negotiable. ID: J10617
Outside Sales - Truss Location: Midwest
Details: This is a unique opportunity for a seasoned outside sales specialist with experience selling trusses to lumber yards. The client will consider Sales Candidates who are willing to relocate to their market. Relocation assistance is available!
Designer - Truss Multifamily/Single family Location: Colorado MiTek experienced Senior Roof and Floor Truss Designer with Multifamily experience needed. The ideal candidate will They are looking for someone with 4+ years have a strong MiTek (Sapphire preferred) selling single and multifamily projects and background and be very experienced in at least a working understanding of the high end single family and multifamily estimating process using MiTek Sapphire or projects from town homes to large apartequal. They have an estimating department ment complexes. The company embraces but want the sales rep to know how to 6 Sigma and a LEAN manufacturing bring the project to estimating. They will philosophy. Candidates who are team pay additional for doing some or all of the and customer service oriented are urged estimating up front. These details are still to apply. There are two positions so bring being developed and may not be something someone you like to work with! they communicate to us so please inquire to Compensation: $50-60's+ be considered. ID: J10535 ID: J10608 Read/Subscribe online at www.componentadvertiser.com
June 1st, 2014 #07179 Page #30 Senior Designer - Truss/ Panel/EWP Location: Canada Responsibilities: Design of roof and floor systems using wood trusses, i-joists and pre-engineered wood beams for residential, commercial and agricultural construction. Prepare drawings for manufacturing and erecting wood building components. Provide technical support to customers, production and sales staff. Qualifications: Diploma from a recognized architectural, civil or construction engineering technology program, degree in civil engineering or previous experience designing roofs and/or floor systems using engineered wood products. Compensation: $60-80k DOE Locations: US Citizens will need at least 5 years of verifiable experience and a minimum of an Associates degree in a design, cad or engineering field related to truss or building construction field. Possibility that employer will obtain an LMO so apply if you have a degree or not. ID: J10383 Designer - Truss/MiTek/Multifamily Location: Texas JobLine Senior Designer ranking or WTCA III certification, and MiTek software experience (Sapphire preferred) required for this position. Prefer someone with commercial and multifamily and having wall panel experience is a plus. Bring your friends and earn a signing bonus. $45-75k+- to start, relocation assistance negotiable. Excellent benefits. ID: J10480
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Production Manager - Truss Location: South Production Manager with 4+ years truss production management or supervision needed at a $3-5M truss plant. 95% Single family custom and tract. Must be hands on, good at organization, and building a production team. Crew of 25-30 per shift, with 1-2-3 shifts depending on demand. Computer literate, able to batch to saws, plan production schedule, flow, and keep tables organized to maximize output. Responsible for interviewing, hiring, disciplining, and terminating as required. Compensation: $50-60k+- plus bonus based on performance. Thom's Notes: This is not rural or city but mid-sized city that is within an our of large cities and beaches. The ideal candidate will have come up through production and have a complete understanding of all positions from the saw shop to the yard. ID: J10566 FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Don’t Forget! You Saw it in the
Hiring Zone - Available jobs
JobLine.com, inc.
The
Hiring Zone - Available Candidates Senior Designer - Remote: Truss/Panel The JobLine Certified Senior Designer (Top .com, 2%). Candidate has 13 years industry experience and 13 years experience in this position. Products include floor trusses, roof trusses, wall panels, and hardware. Markets include tract, single family, custom, high end, multifamily, and light commercial. Primary duties include design, layout, optimization, and cutting/production documents. Secondary duties include checking others work, customer service, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, OptiFrame, GenericCAD, and TJ Expert. Training received includes WTCA Level 1, 2, 3, MiTek 20/20 & Engineering Principles.
JobLine
inc.
800-289-JOBS
800-289-JOBS
Priority Search Assistant Design Manager Location: Canada Experience Required:
• 8 to 10 years of design experience in the wood construction industry with supervisory experience • Min 4 years’ experience in wall panel design with Mitek Sapphire™ or similar • Min 4 years’ experience in I-joist design with KeyBuild® or iStruct™ or similar • Min 4 years’ experience in roof truss design with Mitek Sapphire™, Alpine or similar program
Able to take on a senior level of leadership, direction, and discipline to carry out daily tasks. Able to assist in the evaluation, training, and mentoring of Design Staff; managing team activities, and scheduling and assigning workload appropriately.
Advanced abilities in the following:
• Command of local and national building codes, structural analysis and structural engineering. • Executes design activities in conjunction with project drawings, specifications, schedules, cost estimates, procedures, quality requirements. • Reviews the design scope approach in regards to constructability and submits recommendations for change. • Knowledge in the application and design of building components of wall, floor and roof systems. • Comprehensive understanding of Building Components Manufacturing and Logistics Operations. • Knowledge of computer software, i.e.; MS excel, outlook and word, and Mitek and iStruct. • Fluent in English with above average writing skills.
Education: Bachelor’s degree in Engineering, Architecture, Industrial Design, or a 2 year Diploma in a Construction related Design field is required. Wage: $80,000+ per annum dependent on experience Vacation (6% = 3 weeks) Benefits package being offered: Group Medical/Dental Benefits Relocation assistance is available. Txt: J10613 to 406-210-1226 or call Thomas McAnally 800-289-5627 x1
Strictly Confidential PHONE: 800-289-5627
Adverti$er
June 1st, 2014 #07179 Page #31
This is a perfect Remote candidate with current MiTek Sapphire experience! ID: C10019 Designer - I-Joist/EWP Relocation: Colorado, Nevada, New Mexico, North Carolina, South Carolina, Texas, USA - ALL States, Arizona 3 years experience designing floor and roof systems using I-Joist with Javelin software. Houses ranged in size from 2000 sq/ft to 12000 sq/ft. I was given the "Top Gun Designer" award by Weyerhauser for the 2nd half of 2007 for the Atlantic division. In addition to I-joist I sized all the beams and headers need. Compensation: $45-50K ID: C11637 Senior Designer/Estimator/Technical Outside Sales/Management - Truss/ Panel/I-Joist/EWP/On Site 30 year industry veteran with a broad range of experience from design & estimating, to operations and general management. MiTek, Alpine, AutoCAD, and Microsoft Office software proficient. Experience includes truss, panel, I-Joist, and on site construction of residential, multi-family and commercial projects. Has managed up to 16 designers, and has hands on skills to design projects from tract to large multi-family projects. Estimating experience includes multi-family, town houses, and single family residential. Prior single family construction company owner. Thom's Notes: JobLine Certified Senior Designer. Willing to wear any hat but wants a challenge. Relocation: FL, CO, GA, IA, KS, KY, MO, MT, NC, OH, PA, TN, TX, VA, WV ID: C10749 Designer - I-Joist/EWP Relocation: USA - ALL States 3 years experience designing floor and roof systems using I-Joist with Javelin software. Houses ranged in size from 2000 sq/ft to 12000 sq/ft. I was given the "Top Gun Designer" award by Weyerhauser for the @ nd half of 2007 for the Atlantic division. In addition to I-joist I sized all the beams and headers need. Compensation: $45-50K Txt: C11637 to 406-210-1226 or call 800-289-5627 x1
Read/Subscribe online at www.componentadvertiser.com
Time To Hire? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service
STRICTLY CONFIDENTIAL!
How to Hire from: theJobLine.com, Inc. The JobLine.com is a contingency search firm. No fee is due unless you hire or otherwise engage a candidate that we present. As an advocate for the employer, we screen candidates to meet your specifications, test when applicable, and check references. We will only present candidates who are qualified and have an interested in employment that matches your needs. Every candidate presented must first review your opportunity and request to be presented. No Resume Spam from the JobLine!. Give us a call if you have any questions. References are available.
To request information on any of these candidates or to discuss your hiring needs, please call: Thomas McAnally 800-289-5627 x1 or email: thom@thejobline.com FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
JobLine.com, inc.
The
800-289-JOBS
Time To Hire? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service
STRICTLY CONFIDENTIAL!
Candidates seeking jobs: theJobLine.com, Inc.
The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries. A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. To be considered, every candidate must create and maintain a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time. You can also specify your job, location, and compensation goals. Our Recruiters are personally committed to helping you find opportunities that fit your goals.
To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab. PHONE: 800-289-5627
Don’t Forget! You Saw it in the
Adverti$er
Hiring Zone - Available Candidates Production/Plant/General Manager Remote Truss Designer - Multifamily Truss/Panel/LGS/Wood Relocation: Colorado, Delaware, Florida, Relocation: AL, AR, FL, GA, LA, MS, Maryland, North Carolina, Virginia, TN, USA - South Washington DC My objective is to gain a position as a pro- Overview: Well rounded candidate duction/plant manager with a professional, who worked from a design job through winning organization where I can utilize supervision, to location management. my years of experience to assist in the Candidate is very technical, MiTek Sapphire continued success and growth of the com- experience. Looking for an opportunity to pany. I have a strong desire to be a part work remotely. a great team that has a clear vision and Txt: C12044 to 406-210-1226 mission for their stockholders, customers, or call 800-289-5627 x1 employees, and for the future. I welcome Senior Designer/Design Manager the opportunity for advancement and Truss/Panel/I-Joist/EWP promotion, and am always ready to accept Relocation: USA - Eastern, USA - Southwest new responsibilities. I have been involved Overview: in the rapid growth of a small truss plant, 16 years industry experience. 4 as a new LGS truss and panel production Designer. Now Senior Designer (12 years), facility, and timber truss production, with responsibilities include full layout and responsibility for hiring/training/managdesign, including EWP floor joists , columns, ing employees at every stage. In addition etc. Providing a comprehensive structural to production management, I also have component package to our customers. extensive experience in purchasing, inven- Including large custom homes, hotel/ tory control, quality control and delivery. I apartment structures as well as commercial am "long-term" oriented, having been with applications. Advise all junior designers on my current employer 18 years. I am look- design features not addressed in software ing for the chance to grow and advance packages, i.e. connections, beam/joist within the same company, depending on applications, computer/software issues, risk my performance and abilities. management (design responsibilities), code compliance, basically the "go to guy" in an As Plant Manager: Oversee all areas in office of 14 design/sales staff. Experience wood truss, LGS truss, LGS wall panel, includes roof & floor truss, wall panels, Timber truss production and delivery. Pro- EWP, I-Joists, and component hardware. duction management, Facilities ManageSoftware includes Alpine truss & panel, ment, Maintenance Management, Master AutoCAD, TJ Xpert, Truswal, TJ-Beam, Production Scheduling, Quality Control, and some MiTek. Safety, Hiring/Firing, Discipline, Human Resources, Purchasing (lumber, plates, Thom's Notes: JobLine Certified Senior hardware, LGS and accessories, EWP, Designer etc.), delivery, and others as needed. Txt: C10706 to 406-210-1226 ID: C12001 or call 800-289-5627 x1 Designer/Estimator - Remote Production/Design/Location Manager Location: Iowa or Remote Truss/EWP/Package Inside sales & estimating, blueprint reading, customer relations & service, product Design and manage all truss operations. support, product & job management, purchase all lumber and plates. Arrange problem solving, load transfer, mechanical payment and shipping. Troubleshoot every & technical math, research & design, aspect including machinery. Implemented multitasking, detailing, technical writing, our OSHA safety plan and requirements. data entry, supply and material management. Print invoices and remove material from Software: MiTek, AutoCAD, Microsoft active inventory using peach tree software. Office. Products: Roof & Floor Trusses, Set up new customer accounts and validate EWP, I-Joists, Beams. Prior WTCA III, credit references. Design wood and steel Associates in CAD. joists and headers. Assist customer project Txt: C12253 to 406-210-1226 problems for the best economical and or call 800-289-5627 x1 practical solution. Designer/Design Manager Prior: Truss design and supervise. Purchase Truss/Panel/I-Joist/Stairs/EWP building material. Arrange billing and Relocation: Ohio 18 years Design experience with 3 as a shipping from start to finish. From the Senior Designer. Primary duties: design, small detached garage to the large apartment layout, and optimization. Secondary duties: complex, I have done them all... checking others work and repairs. Software used: Robbins, Keymark, and AutoCAD. Relocation: CA Component experience includes floor ID: C12276 trusses, roof trusses, wall panels, I-Joists, and hardware. Market experience includes tract, single family, single family custom, multi-family, and agriculture. My volume was varied depending on projects. ID: C11856
@JobLine
Read/Subscribe online at www.componentadvertiser.com
June 1st, 2014 #07179 Page #32 Senior Designer - Truss/Panel/Packages Relocation: California or Remote Design As Truss Design Dept. Manager for designers at multiple locations. Primary duties; Reporting to the plant manager, on top of managing a department of 13 to 15 people, which includes the administration duties for the department as well as training newer designers, hiring, releasing, internal policies and customer interaction in the beginning and throughout to the end of the project. Customer consultant and problem solver. Consultant to architects, engineers and local, state and federal jurisdictions. As Senior Designer: Truss design and bidding for primarily commercial projects, layouts, manifests, delivery lists, shop drawings, extensive customer contact, and field relations along with inventory. Extensively worked with DSA for schools. Formatted and wrote many of the programs and forms that were used in the bidding and design stages. Utilized the Uniform Building Code in design practices. Extensive use of AutoCad, MiTek, and many of the Microsoft software programs. Txt: C12255 to 406-210-1226 or call 800-289-5627 x1 Production Manager - Truss/Panel Relocation: USA - ALL States Production/Plant Manager Manager. Candidate has 10 years industry experience and 4 years experience in this position. Products include floor trusses, roof trusses, and wall panels. Markets include tract, single family, single family custom, multifamily, and light commercial. Responsible for Production. Skills include understanding of all areas in the production process, familiar with production equipment and methods, ability to effectively communicate with workers, and MiTek plant software skills. Education: High School Graduate and 2 years college with no degree. Management skills include developing the production schedule, managing resources to achieve production schedule, solving problems on line, and reporting. HR experience includes interviewing, hiring recommendations, evaluating, motivating/disciplining, documenting and implementing corrective actions, and termination recommendations. Purchasing/Inventory experience includes monitoring inventory levels, preparing material requisitions, and managing the inventory process. ID: C10149 Outside Sales/Management - Truss Relocation: Houston Texas Manage the daily function of my sales team, to insure the my team has the tools and the resources they need to reach goals set by the company and their individual goals as well. I have 3 outside sales personnel and 2 inside. Make routine trips to help the team close certain jobs. Work closely with our estimating department to make sure all quotes are handled in a timely manner and with the production team on delivery schedules. Txt: C12256 to 406-210-1226 or call 800-289-5627 x1 FAX: 800-524-4982
MM ACCdverti$er dverti$er omponent OMPONENT
anufacturing ANUFACTURING
Safety First!
Don’t Don’t Forget! Forget! You Saw it in the Adverti$er YOU SAW IT IN THE
Safety Meeting Topics
June 1st, 2014 April 20th, 2012 #07179 #05139 Page #33 PAGE #34
Adverti$er La Seguridad con Herramientas de Corte y Filosas
From State Fund CA.
Frecuentemente en el sitio de trabajo se usan herramientas de mano de corte y filosas. Estas herramienta abarcan desde tijeras, navajas, sierras y cuchillas hasta podadoras, cinceles y cortadoras. Aunque estas herramientas son muy diferentes y pueden usarse para una amplia variedad de tareas, tienen en común Hand-held sharp and cutting tools are frequently used in the workplace. ciertos peligros y precauciones de seguridad. Se deben prohibir los jugueteos The tools range from scissors, razors, saws, and knives to pruners, chisels, and cerca de herramientas de corte y filosas. snips. While these tools are very different and can be used for a wide variety of Las herramientas de corte y filosas pueden ocasionar cortadas y lesiones jobs, they have some common hazards and safety precautions. Horseplay should por perforación si no se manejan debidamente. Los trabajadores deberán estar be forbidden around sharp and cutting tools. capacitados sobre las instrucciones del fabricante en el uso correcto de la Sharp and cutting tools can cause cuts and puncture wounds, if they’re not herramienta, incluyendo cómo inspeccionarlas, mantenerlas y afilarlas. Con handled properly. Workers should be trained in the tool manufacturer’s directions algunas herramientas los trabajadores deberán usar equipos de protección for proper use, including how to inspect, maintain, and sharpen the tool. For personal, tales como gafas de seguridad y guantes que le queden bien. some tools, workers must wear personal protective equipment such as safety Con el objeto de seleccionar la herramienta correcta para cada tarea, el glasses and well-fitting gloves. trabajador debe considerar no sólo la tarea a ejecutar sino también el tipo, In order to choose the right tool for the job, workers should consider not la dureza y las dimensiones del material con el que trabajará. El uso de una only the job task but the type, hardness, and size of the material on which they’ll herramienta incorrecta para el trabajo puede resultar en un accidente o lesión. Los be working. Substituting the wrong tool for the job can lead to an accident or trabajadores deberán usar sólo herramientas de buena calidad que estén afiladas injury. Workers should use only quality tools that are sharp and in good condition. y en buenas condiciones de operación. Si una herramienta está rota, desafilada If a tool is broken, dull or damaged, it should be tagged as such and taken out o dañada, debe rotularse como tal y sacarse de servicio. of service. La regla más importante a recordar cuando se usan herramientas de corte The most important rule to remember y filosas es SIEMPRE hacer el corte en sentido opuesto about using sharp and cutting tools is to al cuerpo y la cara. Cuando se corta con una sola mano, ALWAYS cut away from the body and el trabajador debe saber dónde tiene la otra mano. Si se face. When cutting with one hand, workers cae una herramienta afilada, los trabajadores deberán estar should know where their other hand is. If entrenados para no tratar de atraparla, sino dejar que se a sharp tool is dropped, workers should be caiga, asegurándose de tener las piernas y los pies fuera taught not to try to catch it but allow it to de su trayecto. fall, making sure that their legs and feet are La manera segura de trabajar con herramientas de out of the way. corte y filosas es concentrarse en la tarea que se está The safe way to work with a sharp haciendo, efectuando cortes rectos y uniformes sin sacudir, or cutting tool is to concentrate on the levantar o girar la herramienta. Martillar o aplicar presión task at hand, making straight, even cuts excesiva sobre herramientas de corte y filosas puede hacer without rocking, prying or twisting the que se resbalen. Tenga en cuenta que algunos materiales o tool. Hammering or applying excessive condiciones del tiempo también pueden volver resbalosas force or pressure to sharp and cutting tools a las herramientas. can cause them to slip. Keep in mind, that Los trabajadores necesitan tener cuidado al some materials or outdoor conditions can transportar y almacenar las herramientas filosas. Los also make tools slippery. trabajadores deben recibir instrucciones de nunca llevar Workers need to be careful when transporting and storing sharp tools. una herramienta filosa en el bolsillo, que deben usar funda, cinturón o delantal Workers should be instructed not to carry a sharp tool in their pocket; to use a y que cuando hay una pausa en el trabajo se debe sostener la herramienta a sheath, belt or apron; and when there is a pause in work, to hold the tool at their un lado del cuerpo, pero a una distancia segura. Cuando se camina con una sides but a safe distance from their body. When walking with a sharp tool, the tool herramienta filosa, ésta deberá llevarse con la cuchilla hacia abajo y alejada del should be carried with the blade down and away from the body. When climbing cuerpo. Cuando se sube con una herramienta filosa, se debe usar un cinturón with a sharp tool, tool belts or buckets with hand lines should be used so workers para herramientas o cubetas con cuerdas para subirlas a mano, de manera que el can have both hands to grip the ladder. When passing a sharp or cutting tool to trabajador tenga las dos manos libres para sujetar la escalera. Cuando se traspasa another worker, tools should be passed with the hand first and the blade down; una herramienta filosa a otro trabajador, ésta debe darse con el asa primero y con they should never be tossed from one worker to another. la cuchilla hacia abajo; nunca se debe tirar de un trabajador a otro. When not in use, sharp or cutting tools should be stored in a sturdy tool Cuando no estén en uso, las herramientas de corte y filosas deben guardarse box or on a tool rack with the sharp edges suitably covered. Otherwise, they en una caja de herramientas resistente o en un bastidor para guardar herramientas, should be placed near the back of work benches to keep handles or blades from con sus cuchillas debidamente cubiertas. De lo contrario, se deben colocar cerca extending over the edge. de la parte trasera de bancos de trabajo para evitar que las asas o las cuchillas sobresalgan más allá del borde del banco.
Sharp and Cutting Tool Safety
The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are The above evaluations and/or recommendations arerelate for general only and specifically should not discussed. be relied upon for not legal compliance purposes. They are based solely on the information provided to us and only toguidance those conditions We do make any warranty, expressed or based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982
PHONE: 800-289-5627
READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 1st, 2014 #07179 Page #34
Don’t Forget! You Saw it in the
Adverti$er
new equipment showcase
800-382-0329
New! Roll Splicer
New! Porta Field Press
NEW Monet DeSauw Wood Finger Jointing Line
Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal CutOff Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada. Advantages: -Reduce Waste -Positive Ecological Impact -Produce Straight Material
$79,900 FOB MO
www.wasserman-associates.com
Wood Truss Systems
inc.
765-751-9990
www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Features: • Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber • (3 to 4) second align, roll, eject, cycle time • (2) recessed / simutaneous activation required / saftey controls • Guarded motor and sprockets • 3 HP heavy duty Sumitomo brand electric motor • Air operated / bearing mounted / solid steel hold down rollers • Both top and bottom bearings are adjustable with single crank • Anti-abrasible resistant steel wear slide plate in the splice area
Features: • Presses roof and floor trusses • 4 x 4 " p l a t e n • 5 ton, 1 1/8 dia Cylinder • 5 ton, C-Clamp-Weight 35 lbs • 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs • 10,000 psi 10' length hose • Simple toggle switch operation • Magnets hold connector plates while moving press unit into place
Call 770-434-1006 For Details Salter & Associates www.salter.com
Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com
Business & Professional Services Listings
A full year subscription is only C$225
Tired of service agreements? We have been associated with selling lasers in the wood component industry for over 20 years, dating back to the pioneering truss company in Maple, Ontario. We are big believers in laser projection and have sold systems new and used in the USA, Canada, Australia, and China. In our experience we can easily say that S-L Laser is the best when it comes to customer support and service; they are also the most economical to operate over the life of the system. S-L Laser USA is a company with world class technology based in North Carolina. Cut labor, improve quality, without expensive and time consuming modifications to your existing equipment. PHONE: 800-289-5627
Access Madison’s freshly-updated database of Canadian lumber producers conveniently through your internet browser. As always: with extensive, detailed listings of all Canadian sawmills and remanufacturers, panel, pulp and paper mills, and wholesalers Be up-to-the minute on the full spectrum of company information, including: species handled, product mix, rough and surfaced sizes, production volumes, kiln capacity, number of employees, grading agency mill number, and much more
SIGN UP TODAY
Each listing in our database has been completely revamped! Don’t go without this vital information at your fingertips. Madison’s Lumber Reporter | madrep@shawcable.com | 604 984-6838
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 1st, 2014 #07179 Page #35
Don’t Forget! You Saw it in the
Adverti$er
Business & Professional Services Listings
Advertiser Trivia Answers
Page 5 = Hydrogen Page 24 - the letter “e” Page 25 = where the “3” and “4” sides meet Page 27 = Over 4” Thanks for playing along!
Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers
www.componentrunner.com 314.374.7400
CDean@ComponentRunner.com Used Equipment Wanted! 8’ or 10’ Finish Roller Used Floor Truss Web Saw
Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Planx Ready Tables Triad “Diamond Quad” Framing Tables Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16
765-751-9990
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Thomas McAnally - Publisher 800-289-5627 x1 PHONE: 800-289-5627
Toll Free: 800-382-0329 www.wasserman-associates.com
Our Advertising Rates will
Blow You Away!
CALL NOW!
Read/Subscribe online at www.componentadvertiser.com
tmcanally@componentadvertiser.com
www.componentadvertiser.com FAX: 800-524-4982
www.mii.com/MiTekAssurance
www.MiTek-us.com Page 36
Component Manufacturing Advertiser
June 1st, 2014