October 2014 Advertiser by Component Manufacturing Advertiser

183

PUBLISHED MONTHLY October 1st 2014

COMPONENT MANUFACTURING dverti$er

#07183

SERVING THE STRUCTURAL BUILDING COMPONENTS INDUSTRY

Inside: Question of the Day: Continuous Improvement is a Cultural Thing : Madison’s Canadian Lumber Reporter: Layman’s Lumber Guide JobLine Hiring Zone: Available Jobs Available Candidates

page 3 page 12 page 14 page 22

page 35

Safety First Topics in English/Spanish:

page 36

New Equipment Directory: Business Directory:

page 37 page 38

Stop By Booth #544 and pick up a FREE copy of the Advertiser!

Page 2

www.mitek-us.com/planxreview

Component Manufacturing Advertiser

October 1st, 2014

M ACdverti$er OMPONENT

ANUFACTURING

Published Monthly Editor/Publisher Thomas McAnally tmcanally@componentadvertiser.com

Advertising Thomas McAnally Position available

Subscriptions Renae McAnally

Distributed FREE via e-mail subscription or on line at www.componentadvertiser.com

Download FREE and subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources. Deadline is the 25th of each month. Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Question of the Day By: Stan Sias

Structural Fascia ? Question of the day…The only way I can make my roof corner framing work is by specifying a ‘structural fascia’. How does this work anyway? What is this ‘structural fascia’ and how is it supported? What are the typical connections at each end? How are they executed?

Stan Sias - National Manager Whoa there! I think this qualifies as more Plated Truss Industry at Simpson Strong-Tie that one question, but being that they are all related, let’s take a stab at answering them. As seen in the second graphics, the connection at Structural fascia comes into play when: a) the first ‘stable end jack’ is typically a straight 90 there is only one bearing for truss, typically on a degree hanger. Many of these can have the outer corner jack of a hip set with a long overhang or flange turned-in to help get the hanger closer to cantilever; b) where the existing bearings are so the overhang edge. Hangers that connect with close together they can’t resist the overturning 10d common nails would have an end distance (unstable truss); or c) where the designer is (closest nail to the end of the member) of 1 1/2” trying to limit overhang deflection issues (see if we follow the NDS recommendation of those nails not being closer than 10 diameters from the graphic below). the end. This works out nicely to inset the beam by 1 ½” and then fill the gap with 2x blocking once the beam is installed.

Component Advertiser PO Box 16685 Fernandina Beach, FL. 32035 NO REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION FROM THE COMPONENT ADVERTISER

eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com

Member PHONE: 800-289-5627

October 1st, 2014 #07183 PAGE #3

The structural fascia is actually just another beam supporting a triangular load. The only tricky part is making the beam fit into the allotted space, and making sure that adequate connections can be made on either end. Often times, the beam needs to be moved in off the actual overhang edge to allow for hanger flanges and fastener end distance requirements. READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

T h e h a n g e r connection on the skewed hip member needs all the same considerations. If the hips are symmetrical (main roof and hip-end roof are the same pitch) the hanger would be a standard 45 degree. If the hips are different then we would be looking for a specific skew or fieldadjustable solution. Once again watch those hanger flange widths and be sure that the hanger will fit with adequate nail end distances. ~SS FAX: 800-524-4982

Auto Eye Truss system

Fast Reliable Accurate

www.randek.com www.randek.com

Auto Eye Truss System is an automatic truss production system developed with speed, accuracy and reliability in mind. Read more about our products at randek.com

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

SAWS

Adverti$er

October 1st, 2014 #07183 PAGE #5

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

2003 Spida Automated Truss Saw Automated Stop & Automated Saw Rotation as directed by Truss Software. Computer, Micro Touch Enabled Monitor & Keyboard with Enclosure & Stand. 20’ Outfeed Table & 10’ Infeed Roller Conveyor with Stands. $$11,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Late 2007 Alpine X4 Linear Saw Only Touch Screen Control Panel. 5 Axes of Automation. 15 HP Motor with 22” Blade •Ink Jet Printer. EXCLUDES Auto Feeder (Live Deck). EXCLUDES 2 Outfeed Conveyors for Sorting. EXCLUDES Incline Waste Conveyor. Installed January 2008, Out of Service March 2010. $19,500 FOB IA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2012 Monet DeRobo Linear Saw

EW !

800-382-0329

NEW! Miter Saw with NEW Mango Plate Marker

12" Sliding Miter Saw, Automated 20' Length Stop & Plate Positioner as directed by Design Software Output, 17" Touch Screen Computer, MangoTech Wall Panel Cutting & Marking Software, 30' of Roller Conveyor with Stands, 12 Month Phone & Virtual Tech Support, 2 Day Onsite Training & Installation. Excludes: Dust Collector & Saw Stand.

$22,900

www.wasserman-associates.com PHONE: 800-289-5627

DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and openstair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, touch-screen display, right-to-left feed direction, lumber push and pull grippers for more accuracy, ink marking on edge (1.5” Dimension) on the in-feed side, standard OEM in-feed and out feed decks, small piece delivery to the front of the saw for easy access, includes waste conveyor and incline. 440 volt, 3 phase power.

$108,890 NOW $98,980 FOB AB

765-751-9990

www.woodtrusssystems.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

CONNECTORS

INTEGRATED COMPONENT Systems

Learn more about our system solutions and see what’s new, visit us at BCMC in Charlotte, October 8–9.

LATERAL Systems

FASTENING Systems

999-5099| |www.strongtie.com www.strongtie.com ((800) 800) 999-5099

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Adverti$er

October 1st, 2014 #07183 PAGE #8 SAWS

800-382-0329 2000 Koskovich Auto Omni Saw 5-blade automated saw includes shaker waste conveyor with factory side pan deflectors, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, ink-jet marking system, remote monitor with cabinet, Exair cabinet coolers, all available spares, and shakerpan conveyor. 208/240/480 volt,3 phase, 100 Amp and 120 vac, 90 Amp electrical required. Price: $24,890 :: FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Alpine AutoMill SC Automated Component Saw •Servo controlled for fast set-ups, accuracy and system dianostics •23 Axes of Automation •Ink Jet Printer •1-20” Blade, 3-18” Blades and 1-32” Blade set-up in 2 to 15 seconds •Incline Waste Conveyor •Excludes Live Deck and Outfeed Skate Conveyor

$120,000 FOB AB

Direct Link: http://goo.gl/xaXNAw www.wasserman-associates.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

2006 Razer v4 Linear Saw Features hydraulic 5,000 rpm saw motor, full axis of motion to complete straight, single/ compound bevel, and rip (bevel rip capable) with 14” blade. Handles material up to 16’ in length, 14” in width, and up to 4” depth in either imperial (US) or metric dimensions (shortest cut piece is 3” delivered to front of the saw). Windows OS with color touchscreen interface allows an operator to cut up to 200+ parts per hour, 2nd generation v4 saw with 5-sensor re-referencing feature for enhanced accuracy. Includes OEM supplied in-feed and out-feed conveyor. Well maintained including new C-Axis motor July ’14. 480v, 3Ph power, requires 100 psi air supply. $89,880 FOB IL. See video here: http://goo.gl/Hxns5A Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

SAWS

Adverti$er

October 1st, 2014 #07183 PAGE #9

SAWS

800-382-0329 2000 Alpine AutoMill RS Alpine AutoMill model 344A component saw, computer controlled, sets up in 2 to 19 seconds with download from a network or using the touch screen for ease of operation. Five-head automated component saw works in both automated and semi-automated control via touch-screen input. 23 axes of automated movement. Cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x20" and 1x32" blades with air brakes. Installation and technical support available from the OEM. 480 volt, 3 phase electrical. $19,890 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

R P ed r u ice ct io n

DePauw Floor Web Saw Completely rebuilt by Monet DeSauw over a three month span of time including: All five blade motors are new Baldor with one year factory warranty, all five blade hubs have been resurfaced and balanced, angle crank handles and rods are new, all guards and sheet steel covers are new, hold down assemblies are new, including bars, chain, springs, and bolts. The saw has been completely rewired with new electrical panel components. New legends and buttons where needed, new safety switches on bump bar and cut off guard, new scales and mounts, new drive line chains, shafts and bearings. Shaker waste conveyor has new paddles, sheaves and pulleys, repainted with new safety decals, ready for immediate delivery, factory installation available. 240/480v, 3ph. $36,890 FOB MO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2013 Apollo Radial-Arm Saw WITH Mango Automation Automated centerpoint saw, direct-drive 5.0 h.p. 230/460v, 3ph (208v - 575v) power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37” cuts with an 18” carbide-tip blade. Featured price includes integrated Mango length automation and roof truss software (compatible with all truss/wall-design software), 17" LCD touch screen display, 30' of gravity conveyor, full OEM warranty, and 12 months of phone and virtual tech support, two-day, on-site installation and training. Apollo saw features, HD steel frame with powder-coat finish, and noncorrosive exposed materials (zinc-plate, bronze, aluminum), Blade-stroke limiter, see-through Plexiglas shield, and laser cutting guide now standard for maximum operator safety and minimal regulatory hassle! Add $1,500 for wall marking hardware/software option. $38,700 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

2005 (12/05) Wyrks Tool / Omega Double End Web Cutter 2005 (12/05) Wyrks Tool / Omega Double End Web Cutter / Model 12-05-J-260038 / Cuts 2x4, 4x2 & 2x3 Rounded End RT&FT Webs / Electric and Hydraulically Powered / 460 Volts 3 Phase / Bought New in 2005 for $70k. The rounded end web system that can replace up to 70% of conventional angle cut webs and they deliver equivalent performance. The system is a field proven manufacturing system that saves hours of cutting and assembly time, which can greatly reduce costs. It consists of the rounded Roof and Floor webs. Rounded webs are a fully tested alternative to conventional truss webs. Design procedures for both lumber design and plate connections are in full compliance with ANSI/TPI 1-2002 “National Design Standard for Metal Plate Connected Wood Truss Construction” NOW $4,800 FOB: GA Salter Associates 770-434-1006 www.salter.com

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

• • • • • • • • •

2006 Omni Miser Saw

Automated Wood Processing System Model RTWF (Roof Truss & Wall Frame Components) 5 HP Motor with 16" Blade Cuts 2x3, 2x4, 2x6, 2x8, 2x10 & 2x12 up to 16' in length Crooked Lumber Sensor Print System D (Both Faces & One Edge) Auto Deck (Live Deck) Available Septemeber 1, 2014 Installation & Training is available at additional cost.

$115,000 FOB WA www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

4Ward ConsulƟng Group Today’s component manufacturing requires you to be eĸcient while maintaining quality and delivery expecͲ taƟons. Our experience in all areas of a component business will provide you with handsͲon consulƟng which will drive proĮt to your boƩom line. With experƟse in labor tracking and the use of metrics in an operaƟon, we will provide you with accurate and useful informaƟon. In addiƟon, our team has employͲ ment experience in mulƟple and single locaƟon operͲ aƟons and in all management levels of a business.

g in d en

Your source for these answers and so much more is

SAWS

If you are trying to track labor, do you know the diīerence between ProducƟon and ProducƟvity? Are you geƫng advice from a team that actually managed producƟon?

Adverti$er

2006 Hundegger SC-1 Linear Saw •Servo Driven Single Blade Linear Saw •Angle & Bevel Drive for Roof Truss, Floor Truss & Wall Panel Cutting •Process Lumber from 1/2” x 1 1/2” to 6 1/4” x 17 3/4” up to 26’ in Length •Automated Cutting with Software Download to Operator Console •Automated Infeed Conveyor & Table •Automated Clamping & Positioning System •Outfeed Table with Ink Jet Printer •Currently in operation and available for inspection until the end of March 2014 •Optional Installation, Maintenance & Tech Support available from Hundegger. FOB AB. $105,000 NOW $95,000 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

ConƟnuous OperaƟonal Improvements New Business & Product Development Financial & Performance Metrics Time & MoƟon Studies Personnel & Hiring Strategies Business TurnͲAround Ask us about the many other services we provide “Businesses oŌen express some concern for the value of a consultant’s advice. With 4Ward ConsulƟng Group their clients experience the beneĮt of over 30 years of service and success dedicated to the building component industry. Along with many of their clients, I have found total conĮdence in the focused, Ɵmeproven, advice delivered by Ben Hershey and his team. Built on Įrst-hand knowledge in every segment of operaƟng a proĮtable component manufacturing business there is no beƩer source of consulƟng available in our industry.”

2006 Mango Apollo Saw 2006 Apollo saw[s] featuring Direct-Drive 5.5 h.p. 220/440v, 3ph power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37” cuts with an 18” blade. Features stroke limiter, powder-coat finish, 20' conveyor on the feed side and 10' conveyor on the exit side with vacuum dust collector. OEM Installation and service agreement available from MangoTech USA. $8,890 NOW $7,390 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Ͳ Jay Halteman, President, Wood Truss Systems, LLC Contact us today and Įnd out why more and more manufacturers are turning to 4Ward ConsulƟng Group.

info@4wardconsult.com info@4wardconsult.com www.4WardConsult.com www.4wardconsult.com Or call 623.512.6770

PHONE: 800-289-5627

October 1st, 2014 #07183 PAGE #10

2000 MiTek Cyber Saw Frame #151, Fully automated five-blade component saw. Cutting performed by (2)-16" X 6HP, (2)-20" X 6HP, (1)-32" X 12.5HP, all powered movements, cuts 2x3 thru 2x12. Lengths cut from 2 to 20 feet. Includes scrap conveyor (no incline) and outfeed skatewheel stand. 240V/60Hz/3ph. Missing saw #3 and #5 motors. $16,490 FOB TX. Wood Truss Systems 765-751-9990 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

The Average Truss Plant Has Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts!

Sell It! in the M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Call Today and Make Some Extra Cash! 800-289-5627 FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

SAWS

2005 Omni Mini-Miser Saw •Omni Mini-Miser Saw •5 HP Motor with 14” Blade •Ink Jet Printing System •Incline Live Deck •Bulk Feeder •Five(5) Magazines $34,500 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE

SAWS

2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $59,900 FOB AB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er

SAWS

MiTek Combi Set Web Saw •Four Blades Cut Lengths from 2' to 16' •Waste & Incline Conveyor •Extra Set of Blades •220/440 Volt - 3 Phase $13,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

October 1st, 2014 #07183 PAGE #11

SAWS

Holtec Transcut Portable Crosscut Saw •20 HP Kohler Gasoline Engine •Cutting Capacity: 48" x 48" •Chain Oiler •Guide Bar with Chain Tensioner •Kickback Safety Bar •Squaring Frame $5,250 FOB NV Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Adverti$er

October 1st, 2014 #07183 PAGE #12

Continuous Improvement is a Cultural Thing If you are attending the BCMC show in Charlotte, NC, what is it you are hoping to find? Are you looking for new methods of improvement for manufacturing or design? Perhaps your goal is to make a decision on purchasing new equipment or establishing a new relationship with a vendor. If your goal is some type of improvement, then your intent may be considered continuous improvement and is the major tenant of lean manufacturing principles. The Japanese reference this idea of “good change” as kaizen. Most companies who embrace lean manufacturing practices simply refer to this as being continuous improvement. When I am performing my services as a consultant I explain and demonstrate all the lean principles, but continuous improvement comes from within a company’s culture. Continuous improvement can be summed up by viewing everything with 3 things in mind: Can you improve it by fine-tuning it, modifying it, or completely replacing it with something better? Nothing is off limits and it is a never-ending endeavor to seek improvement. Understanding and implementing this are two very different things. One must embrace change as something that is beneficial and worth the effort. Here are examples that I have witnessed in my consulting services, as well as the results. Failure example: Sometimes people within a company want to improve their company but they have no real power to do so. In other words, they do not have the management’s authority to actually implement what is discussed and demonstrated during the consultation. Thus all too often what ends up happening is a game of “protection of perceived power” within each group and also “failed leadership” from upper management. Change often requires responsibility shifts and a change of current practices. Because change requires effort and everyone is already tasked with a very busy workload, few want to give up their current practices, believing it is only the other departments that need to make any type of change. You can do your best to show how much the overall organization will benefit from the changes, but without buy-in from everyone and the backing of better management practices, it is a total waste of time. More often than not, these types of companies view a major equipment purchase as the one thing that will make all the difference. Typically the equipment purchase is biased toward their current vendor’s recommendation without knowing the true pros and cons of what might be a better fit for their needs. Once the new equipment is actually purchased and installed, all the other practices that need to be refined for the proper use of it are not properly thought through and therefor the new investment is only marginally helpful for their situation. I cannot tell you how many times I have witnessed expensive equipment being severally underutilized. An example of this is easy to see in a company’s production by generating a report on any of the automated saws and seeing what percentage of the shift it is actually making sawdust. Without a doubt, these types of organizations are the most difficult and disheartening to deal with. They typically have high employee turnover with positions constantly vacant, so their overall output suffers. Their cost of manufacturing is marginal at best. Also, they are always the ones with the poor net profit results. I often wonder how they remain in business. Successful example: Real positive change comes from the top down of the organization. Continuous improvement is part of the culture of the company and it starts with the CEO. The best companies I have witnessed implementing better practices do so by empowering and encouraging their employees to look for better methods on a daily basis. When I do my consultation it is so refreshing to present the material to a group who is eager to listen and challenge me. (Where do you think some of my best ideas come from?) Many ask me, “What is the single most important thing that will make a real positive difference to our organization?” I tell them first they must embrace the ideal of cultural continuous improvement and second comes New Website Offers Mobile Friendly Interface! everything else. Yes, refining the labor standards, pricing methods, The website includes a product explorer which will allow you to search and maybe purchasing new equipment might make big difference for them, but all the other things need to be done too. It is never just for specific equipment from the over 150 new & used products available. one thing, but many things that add up to making a real positive The listings will be comprehensive with great detail, many photos and an change. Typically, it takes most companies 6 to 12 months on their occasional video. Our goal is to provide the best resource in the industry for own without further assistance from me to implement all the things making profitable equipment selections for your company. we discuss in a consultation. That means it is a sustained effort on their behalf to constantly review and methodically implement all the desired changes they are going to implement. This is what is referred to as continuous improvement. Every company I have witnessed implement this type of cultural environment all have three common results: (1) low employee turnover, both in the shop and in the office, (2) lowest cost of manufacturing, lowest errors, and best quality, and then finally, (3) best net profits. If you are going the BCMC show, I do hope you find something that will help you become more successful. Maybe it is the small change you pick up from a seminar, or maybe it is a much bigger change such as a major equipment purchase or vendor change. Whatever it is that you are going to the show for, look for the potential change as an opportunity to make your life a little bit better. I hope to see you at the BCMC show this year! Read Todd’s newsletters at: www.todd-drummond.com/newsletter

www.wasserman-associates.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

Educational Sessions Vendor Exhibits Plant Tours CM Roundtable BCMC Build SBCA Annual Meeting and more! “BCMC is a great opportunity to renew old friendships and make new ones, and between the educational sessions and the show floor I always learn a lot about industry innovations and trends.” –Chris Johnson, Toll Integrated Systems, Inc.

BCMC

BUILDING COMMUNITY

MAKING CONNECTIONS

M ACdverti$er OMPONENT

ANUFACTURING

October 1st, 2014 #07183 PAGE #14

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

All was not lost, however, as order files at most sawmills September Lumber Market Analysis remained at a solid two weeks. The game at the end of September was to carry just enough wood to not get caught short thus have to accept producer asking prices, but also to not stock up too much as many players are waiting to see if prices soften further. With the US home building season almost completed for this year, all eyes were on China for large program buying which has been happening at this time of year, especially if price floors are weakening.

By Keta Kosman Publisher, Madison's Lumber Reporter September 22, 2014

After a very busy pre-Labour Day week of trading North American dimension lumber and panel products, sellers expected more business in September than actually happened. Disappointment reigned for producers as sales volumes were below expectations after an encouraging August end. Solid wood traders kept waiting for pent-up demand to materialize following the long For the past couple of years a surge in demand out of China weekend but all they got was disinterested customers. at the beginning of 4Q, when demand is traditionally low, has Suppliers did their best to resist counter-offers but were beaten down by buoyed prices off historical low cycles. Whether that will happen stalwart buyers, especially in the east. Eastern SPF sellers told Madison’s Lumber again remains to be seen; so far this year lumber export volumes Reporter in mid-September that customers were calling to actually cancel orders from British Columbia to China remain stable. already made if they didn’t receive a discount on the previously-agreed price. While some specialty items were hotly sought after, others Purchasers of eastern studs were triumphant in beating down producer price experienced a down-market. Specifically green Douglas fir, lists. Standard construction-framing dimension lumber products did a little bit most highly prized by home builders in California and the US better as suppliers were able to hold prices level on those. Just. northeast, had a discouraging drop in demand this month. Some panel products suffered a slash in prices midSeptember then bounced back up. Manufacturers of OSB and plywood remain nervous as prices are currently very close to cost-of-production. Regardless, panel traders reported new orders coming in every day. Recent supply curtailment out of one major OSB mill is helping to keep the supply-demand balance stable as autumn approaches.

MADISON'S LUMBER REPORTER KEY PRICES WEEK OF 09/19 To be published in this week's issue of Madison's Lumber Reporter: WSPF KD R/L 2x4 #2&Btr . . . WSPF KD R/L 2x6 #2&Btr . . . WSPF KD R/L 2x8 #2&Btr . . . WSPF KD R/L 2x10 #2&Btr . . . WSPF KD PET 2x4 Studs . . . Douglas Fir green #2&Btr 2x4 . . . Douglas Fir green #2&Btr 2x10 . . . ESPF KD 2x4 8ft Studs . . . . . . . OSB ON 7/16" (C$/1000 sq ft) . . . all prices FOB mill, US$ per thousand board feet *except OSB which is C$ per thousand square feet

$362 $380 $378 $388 $345 $325 $380 $435 $205

-6 -6 +0 -2 -10 -5 -5 +0 -5

PHONE: 800-289-5627

Regardless of species, dimension lumber as well as studs 2x6 sizes continue to be quite hot. This item is used most in US multi-family building, so ongoing demand could be an indicator of future new housing starts of that type.

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Visit us on Slideshare! http://goo.gl/gDeRsX

Keta Kosman - Publisher Madison's Lumber Reporter Madison's Timber Preview Madison's Investment Rx 604 984-6838 www.madisonsreport.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

Design your own custom roof truss gantry! Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990

Don’t Forget! YOU SAW IT IN THE

TRUSS EQUIPMENT

Refurbished 1997 CMF Tracked Gantry System 1997 side eject CMF tracked gantry system with 14’ by 93 ft. working length. Tables and finish roller press were refurbished in 2007. System features (13) plastic topped tables with slotted-steel bottom chords, (1) 24” CMF diameter gantry head, (1) CMF 24" finish roller press, (4) idler rollers, and all available receivers. 440 volt, 3 phase electrical. $43,890 :: FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er

October 1st, 2014 #07183 PAGE #15

TRUSS EQUIPMENT

Sanford Finish Roller Press with Idler Conveyors Sanford final roller press, 18" diameter x 12 foot throat, includes 5 HP motor, safety bars, (14) idler conveyors 11 foot long. 440 volt, 3 phase electrical. $4,890 $4,190 :: FOB KS Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Hydro-Air Beaver B80 Floor Truss Machine •Traveling Hydraulic Press with Push Button Controls •Platen Size: 20” x 70” •(10) Air Cylinders for Clamping •Overhead Plate Rack •Floor Truss Lengths to 39’-6” •Floor Truss Depths from 12” to 24” •480 Volt / 3 Phase $15,000 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

2007 Klaisler Tracked Gantry Head Klaisler Gantry with riding platform, 24" diameter roll, variable frequency drive and Sumitomo twin drives, Very low hours. 230/460v, 3 Ph. Price: $18,990 :: FOB SC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Square 1 Floor Truss Finish Press New 2014 Square 1 floor truss finish roller press, four-foot* wide x 3 1/2” tall throat. Use of this process speeds assembly and transports finish truss away from the production area, adds quality and peace of mind for your finished floor trusses. The unique “uni-body” construction creates a ridged machine that does a final press of the connector plates for complete embedment into lumber, saving wear on your floor assembly machine. 14” diameter rolls, 7 1/2 HP motor, 80# chain, 114 FPM speed, emergency shut-off bars, chain and sprocket guards, integrated brake. Available options include: *other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

MiTek TK-8 Klincher 60' C-Clamp Systems MiTek TK-8, 20 ton C-clamp style press with 60’ working length floor-mounted jig filtering. Each system includes: support beam, manual trolley, counter balance arm with hydraulic reservoir. Three systems available. Price is per 60’ system. $6,900 each. FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2007 MiTek Floor Truss Stacker Foor truss stacker. Stacks single, double, or triple high stacks, includes 10 idle/powered outfeed conveyors, with OEM control panel. 208v, 3 phase power. Price: $14,190 :: FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

CMF Tracked Gantry Tables Quantity of (4 3) 6' X 14' slotted, 3/4" steeltop tables with ejectors (some partial) and some rail for an extension of a roller gantry Klaisler Receiver Arms truss line. Tables also useful for Wall Panel (27) Klaisler Receiver Arms sub-components, roof-truss "junk" tables Date of Manufacture: 2005 & 2006 (jacks, valley-sets, etc.), metal fabrication Excellent Condition tables. Will sell individually. Price: $2,500 Reduced - $550 @ any quantity FOB GA ea. :: FOB NC Salter Associates Wood Truss Systems 770-434-1006 765-751-9990 www.salter.com www.woodtrusssystems.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Hydro-Air Mark-10 Mono-Press •Press Tonnage: 37.5 Tons •Platen Size: 10” x 18” •Lumber Size: 2x4 to 2x10 •Includes: Hydraulic Power Unit, Counterbalance Arm, Trolley & C-Clamp Press •Excludes: Overhead I-Beam, Electric Feed Rail & Pedestals (all available at additional cost) •480 Volt / 3 Phase $8,000 FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

www.todd-drummond.com

Adverti$er

todd@todd-drummond.com

October 1st, 2014 #07183 PAGE #16

(603) 763-8857

75+ Companies Completed 25+ Years in the Truss Industry 10+ Years in the Consultation Business Expert in reducing cost and improving productivity in all departments of wood truss and wall panel manufacturing. Normal gains for most clients are 3 to 6 points in net profit! √

Common-sense best practices garnered from over 75 consultations.

√

All proven methods with lean principles in mind.

√

Improvement in all areas such as manufacturing, design and sales.

√

Proven time standards (Man minutes) for truss manufacturing.

√

I do not make any fees, commissions or other income from any equipment or truss plate manufactures. My advice is unbiased.

√

Go beyond the typical truss plate and equipment vendor recommendations!

See website for testimonials and consultation service details: http://todd-drummond.com/todds-profile/ Testimonials of services: http://todd-drummond.com/todds-profile/ Consultation Brochure: http://todd-drummond.com/wp-content/uploads/2013/05/Consult_Brochure.pdf http://todd-drummond.com/wp-content/uploads/2013/05/Consult_Brochure.pdf PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

October 1st, 2014 #07183 PAGE #17

M ACdverti$er A Thinking of Selling your Company and Want to Maximize the Value? OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

dverti$er

Restructuring or Refinancing and Want to Minimize Your Cost of Capital? Expert Financial Advisory Firm Specializing in the Building Products and Component Manufacturing Industry. With deep contacts in both component manufacturing and the financial world, sellers can expect to have access to over 80 potential suitors. On a recent deal, this competitive approach earned a client far more than the current owners ever expected. If you are thinking of selling, or would like to figure out how to get the lowest cost of capital, call me and we'll get you the proper expertise on your side of the table to maximize value. TDC collaborates with a well-established, industry-focused financial advisory firm. This firm is extremely sophisticated and has a well-earned reputation for honesty and integrity that is already established within the building products and construction industry. If you're interested in any of the above, call me and I'll put you in touch with them.

Everything at your fingertips via tablet, smartphone or computer over the Internet.

Quick - Simple - Drop-Dead Easy to Use! Tracks the labor per each truss count off the build tables.

All info linked to each W.O…. √ Multiple schedules for all departments √ User-defined dependencies for schedules and tasks √ Automated reminders √ Any type of file such as prints √ Notes viewed by all √ Change order requests √ MS Outlook® e-mails And more to give your people more time to get things done!

Testimonial of Consultation Services Wallace Building Products Corp. John Tauriello – President Danbury, NH Wallace develops and manufactures panelized wood building components and installs turnkey frame packages for commercial, multi-family, and residential construction projects in the Northeast US. We initially engaged Todd to introduce and implement lean manufacturing methods that would help us streamline our manufacturing and business processes. He brought much more! Todd possesses analytical horsepower, particularly strong knowledge about component manufacturing equipment and current best practices in our industry. He emphasizes a common-sense approach with plenty of real-world applications. We have implemented several of Todd’s suggestions in our manufacturing processes and our business processes. In addition, he helped us plan and implement a relatively modest capital equipment investment that will help us dramatically increase our production capacity! Todd was well worth our investment in his consulting services. PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

PASSIONATE ABOUT OUR WORK AND DEDICATED TO OUR SERVICE

FINISH ROLLERS FOR ROOFS & FLOORS COMPACT DESIGN & ECONOMICALLY AFFORDABLE (2)12” DIAMETER X 4’ to 8’ LONG ROLLERS WITH CONTINOUS SHAFT AVAILABLE IN 4’, 5’, 6’ LENGTHS (PRICED PER 1’ EXTENSION) 7 1/2 HP SUMITOMO GEAR MOTOR NO. 80 DRIVE CHAIN AND SPROCKETS INTEGRATED LASER CUT STEEL SUPPORT FRAME PILLOW BLOCK ROLLER BEARINGS STRUCTURAL STEEL FRAME 114’ PER MINUTE FIXED WORKING SPEED *12” diameter roller may not meet TPI specifications, based on a single pass system. Please check your local code.

CONTACT SALES@SQ-1DESIGN.COM SALES@SQ-1DESIGN.COM

866 647 7771

M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

1990 Alpine 14' x 80' Side Eject Roller Gantry System •Alpine 14’ x 18” Diameter Roller Gantry (Track Mounted) •10 Each - 8’ x 14’ Tables with Pop-up Skatewheel Conveyor (For Side Eject) •Steel Top at Bottom Chord, Balance is LVL •Mitek Tekset Jig Hardware •Exiting Conveyor (No Receivers) •Alpine 14’ x 18” Diameter Finish Roller •No Outside Conveyor Optional Equipment Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ $19,900 FOB MN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mitek 14' x 24" Diameter Finish Roller including 12 Truss Rollers. $11,250.00 Now $9,900 FOB MT. Wasserman & Associates 800-382-0329

Don’t Forget! YOU SAW IT IN THE TRUSS EQUIPMENT

Table Guided Gantry System by Square 1 Manufacturing New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", undertable-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase. Price: $(Based on required configuration) :: FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Adverti$er TRUSS EQUIPMENT

PE & E Floor Truss Gantry PE & E kick-leg floor machine builds up to 34 foot maximum span floor truss, 12 inch minimum truss depth, 24 inch maximum truss depth. Includes one head with 5 HP electric over hydraulic drive motor, joy-stick control, operator stand, steel-top table with steel angle/air hose clamp system, electric s/o cord with wire cable/ pulleys, (2) masts and all available jigging. 240 volt, 3 phase electrical. $10,890 $7,890 :: FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Custom Floor Truss Splicer Hydraulic floor truss chord splicer system splices 2x4 chords for floor-truss operation with maximum plate size of 3" X 10". Dual hand controls allow for safer operation. 10' infeed/20' out-feed conveyors. 10HP motor with integrated hydraulic reservoir. 208v, 3ph, 60Hz (multi voltage Baldor motor). Price: $7,800 :: FOB NC PENDING Wood Truss Systems 765-751-9990

FitzGroup.com PHONE: 800-289-5627

October 1st, 2014 #07183 PAGE #19 TRUSS EQUIPMENT

Panel Clip TK-7 C-Clamp Truss Presses •10 Ton C-Clamp Press •Platen Sizes from 4” x 5” to 5 1/2” to 6 1/4” •110 Volt Motor & Pump •Includes Boom & Trolley •Excludes Overhead Beam & Jig Table •3 Roof Truss Presses Available •1 Roof & Floor Truss Press Available $5,000 Each, FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Rand Final Roller Press Rand finish roller press with 14' throat x 18" diameter rolls, forward/reverse functions, (2) 5 HP motors, safety bars, 80 RIV chains and drive enclosures. 220 volt, 3 phase electrical. Price: $8,900 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

RFitzgerald@FitzGroup.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

ADVERTISMENT

Universal Trusses – Customer Study Universal Trusses Start of business: 1989 Time for investment: 2013 Country: Australia Reference: Arthur Potter, Owner Investment AutoEye Truss System a system for automatic production of roof trusses. Configuration: pucktable (17 m) with angle transfer and nailing bridge. What was the basis for the investment? “We made the investment for several reasons. We wanted to automate the production of trusses more, achieve higher quality and get the opportunity to build complex trusses. Also traditional equipment requires skilled and motivated workers and this is difficult to find. We had an issue with worker compensation insurance and this cost a lot of money so we wanted to avoid this in the future. The issue was caused by people walking up and down on a jig table 8 hours per day. The AutoEye is the future of building trusses, in the future all will build with this system no one will build with the old systems it is just a matter of time before they change.” In general what do you think about the system? “It works. We can build complex trusses easily. We now can control the production and control the labor. Before on the old systems we used when building complex trusses we did not know how long it would take. This could cause red projects or lock the production for an uncertain amount of time which could create late orders and angry customers. Now we know that a joint will be processed every 10-11 seconds, this gives control. We have significant lower production costs with this system combined with much lower education cost. Before it took approximately 6 months to get an operator skilled enough to produce trusses with the right quality and productivity level. Now they can do this from day 1, even I can build trusses. Also cost for labor control has reduced a lot. Today we run 2 shifts without problems the production manager does not need to be on site the quality level and productivity level is on the same top level anyway. Before it was impossible to work 2 shifts because it was very difficult to find skilled and motivated workers enough. Before many of the workers we hired were not motivated or skilled enough so we needed to sack them after a period of time which also created a lot of costs. Today the workers wants to work with this system, it is true!! We are not reliant to skilled workers.” What are the main benefits of the system? “High automation and output level combined with high consistent quality. Also the ability to control the labor cost through the project. Pucks + laser give a high quality level. C-presses can give good quality but you are reliant to the operators being skilled enough and you need to control the workers and constantly check that they actually run the c-press fast enough and are motivated to set-up the system in the correct way.”

ADVERTISMENT

What do you think about the service level from Randek and Bliss and Reels?? “It is good. The only issue is the time difference between Australia and Sweden for issues that needs to be solved from Sweden. We have not had any service problem. You can tell that the machine has been built really well, it is impressive.” How would you compare this system with traditional systems? “Arm jig (c-press system) – this system is reliant how fast the person actually walks around the system with the c-press so you need to control them. It takes several months to educate the staff which is costly and you invest a lot in the personnel. Also the set-up time is very demanding and the quality output is an issue. The quality is dependent on how accurate you set-up the system.” “Box-jig – It improves the output compared to c-presses but it is very limited what type of trusses you can actually build.” “Table press – A big issue is that you need to walk up and down on the tables the workers do not want to do this and it can create a lot of costs through worker compensation insurances. The quality is an issue; you need to slide the nail plates under the wood members which is difficult to do with high accuracy. The system is also dependent on the workers to hammer the corners of the nail plates correctly so they do not slide when entering the roller press.” “The Randek automatic truss production system solves all this!” What do you think about the AutoEye software? “It is easy to set-up the trusses and the offline planning is a good feature. The software is easy to learn. It works. The only feature we miss, that is under development, is higher flexibility to park the nailing bridge in different locations during the production.” How would you change the system if you were to invest today? “I would invest in more table units making the table longer giving us opportunity to have a double table system for more trusses, today it is only possible if we do 2 short trusses as the pucktable is in total 17 m long. We would not invest in the nailing bridge. We get a higher output when not using the bridge when producing low trusses in height and we do that often. For our type of production it only makes sense to use the nailing bridge when running a 2 table set-up which we rarely can due to limitation in length of pucktable we chose to invest in.”

Auto Eye Truss system Anyhing more you would like to add? “We are very pleased with the overall quality with the system.” Arthur Potter, Owner, Universal Trusses 52 Sheppard Street Hume ACT 2620 Australia http://www.universaltrusses.com.au/

Fast Reliable Accurate

www.randek.com

Auto Eye Truss System is an automatic truss production system developed with speed, accuracy and reliability in mind. Read more about our products at randek.com

L A Y M A N ' S LUMBER GUIDE

â&#x20AC;˘Page â&#x20AC;˘Page â&#x20AC;˘Page â&#x20AC;˘Page

LUMBER MARKET INTELLIGENCE Softwood Framing Lumber Market Forecasts & Trading Strategies Since 1985 Matt Layman, Publisher

Week #38

Thursday

â&#x20AC;˘Page â&#x20AC;˘Page â&#x20AC;˘Page â&#x20AC;˘Page

1...Lumber Market & Trading Strategy 2...Briefings 3...Southern Yellow Pine Lumber 4...Canadian SPF Lumber

September 18, 2014

5...Dry Fir Lumber 6...Green Doug Fir Lumber 7...Oriented Strand Board 8...Component/Treated Stock

â&#x20AC;˘Page 9...SYP & Canadian Studs & Prices â&#x20AC;˘Page 10...Western US Studs & Spread Matrix â&#x20AC;˘Page 11...Lumber Futures Analysis

The Future of Housing

The Future of Lumber Prices

NEW, custom-built single-family, homes are rare these days. Large tract and multifamily builders are providing the punch to this housing recovery and their choice of location is metropolitan areas and the suburbs. Why is that? That's where the jobs are and where new home buyers are moving. Cities and suburbs are where opportunity, entertainment, and education are best. Businesses are expanding towards major metros, creating new jobs, attracting the qualified employees and home buyers. It is a self-perpetuating evolution. This is truly an example of, "If you build it they will come." This scenario is creating long term growth shift away from rural communities with multigenerational family-owned businesses, like lumber yards and farms. Even more remarkable is the possible elimination of forest products as a primary construction material in only 1-2 decades. How? 3D PRINTING! Imagine a planet with more trees, oxygen, no O-Zone, no global warming. Abundance through exponential technological growth can eliminate poverty, hunger, and insufficient housing. The world IS a better place and continues to get better. Progress = change. Prepare.

The single most important thing to know about the lumber market is "when prices will change." Look at the chart below. Note the approaching week #44 and week #12 of 2015. The Forecasted Decision Points trend and 10-year average clearly projects that prices should be expected to work higher during that period. Now look at the previous same cycle. The trend was similar, yet not identical. Why? People tend to repeat most recent behaviors with slight modifications toward improvement, like diet and exercise. The Forecasted Decision Points formula considers past behavior and expectation of desire to improve future performance, thus creating a reliable forecast. In the next cycle beginning in October, housing expectations are more uncertain. Lumber supply is expected to increase. This will reduce transportation issues. These three components diminish buyers' fear, i.e., willingness and desire to accumulate, or build a speculative inventory. This behavior creates a scenario in which prices decline and buyers become over-liquidated. To get that strong up trend lumber prices need to fall by $50-100/mbft over by week #44, which is entirely possible. We are headed in the right direction at the right time. Looking Forward...ml

FORECASTED DECISION POINTS (FDP'S), 10-YEAR AVERAGE, LUMBER COMPOSITE

SPOT PRICE Composite 2x4's #2 SYP-E, SPF-W, Dry Hem Fir, Green Doug Fir. (Blue). FDP's (Vertical Red Lines), reversals or accelerations, since 01/99: 387 FDP'sâ&#x20AC;Ś336 turns within 1 week. 87% FDP Historical Accuracy. Green Shade=Highest Demand Weeks #10-25; Yellow Shade=Daylight Savings Weeks #e10 Through Week #45; Red Shade = Lowest Demand Weeks #45-09.

Lumber Market Intelligence...Matt Layman, Publisher 145 N. Main St., Cramerton, NC 28032 Phone or Text: 336-516-6684 Fax: 888-811-6917 email: matt@laymansguide.org Reprint or distribution is unlawful without permission. TWITTER.com/Laymansguide Join Matt layman on LinkedIn

www.laymansguide.org

Product dimensions referred to herein do not imply actual net sizes, rather are commonly used descriptions of the products.

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

WALL PANEL EQUIPMENT

Wright Panel Lift and Hoist Assembly (Bridge Crane Assembly) Wright lift and hoist assembly . Includes (2) 1.5 HP trolley motors, (4) 500 lb. capacity hoists, capacity (1) ton. Was used for transferring wall panels to 12 feet in height. Distance between the hoists is 13'-6" x 8'-0", the travel distance is 50 feet and the vertical travel distance is 15 feet. See video for demonstration. 220 volt, 3 phase electrical. Price: $9,990 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Basic Automation 12' x 16' Interior/Exterior Wall Panel Line Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge. Includes (25) Senco Staple Guns. $9,900 FOB GA. Wasserman & Associates 800-382-0329

Adverti$er

October 1st, 2014 #07183 PAGE #23

JobLine.com, inc.

The

800-289-JOBS

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

2006 IBS Wall Panel Line Framing table with light bar and gun mounted laser, (3) monitors with fiber optic hub, squaring table, sub-component table and sub-component nailer. Also includes a nail/sheath/multi-bridge with 5 degree tilt feature and (28) bostich gun tool mounts, panel lift, (2) tool dollies, and hand-held router. Builds maximum length of 16' 8" and 12' height. 120 PSI air, 208/230v, 3 ph power required. Price: $49,490. FOB NB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

Time To Hire? We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

Carlson 9' x 16' Wall Panel Line •Framing Table with Stud Locators, Skatewheel Conveyor & Pneumatic Plate Clamping •Squaring Table with Router Bridge •Sheathing Table with 16 Tool Panel Bridge •Excludes Bostitch Nail Guns on Panel Bridge •Triad CN-4 Sub-Component Nailer $14,900 FOB PA Wasserman & Associates 800-382-0329 www.panplus.com www.wasserman-associates.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

Informa-

TECHNICAL SPECS

MangoTech Plate Marker System

3000 Lineal feet production per 8 hour shift

Extremely easy to use, the

Standard infeed table speed

MangoTech Platemarker

240’/min (can be increased)

System can be retrofitted to pull

Number of operators: 1

o r u n d e r c u t s a ws , o r s u p p l i e d

Marks top and bottom sill plates

wit h t he M ango Apollo Sa w

Cut and mark 2x3-2x6 on edge, 2x8-2x12 flat Cuts all wall pieces Allows manual input

The desired wall file to be cut and marked is selected from the file loading screen.

10 degree min. angle cut

The plates are placed on the saw

Smallest length cut: No

bench and cut to length. If the saw

minimum

is fitted with angulation, the angles

Largest length cut: 21’6” (Can be

will set automatically.

extended by extending length stop Length of delay to mark board:

Once the plates are cut, the length stop will automatically reset for marking.

1/2 sec (can be adjusted)

After making the first mark, the length stop will feed the plates SOFTWARE SPECS

forward to the next marking position

Compatible file formats:

on an adjustable time delay. This is

.trs, .mdf, .mwf, .xml, .hay/hfs, .gwf, .tx

repeated for the length of the wall. Cutting and marking order can be

Tech service agreement

filtered and batched to be cut for

available

efficiency and to suit each plant’s needs.

ADDITIONAL BENEFITS Can cut truss members w i t h t r u s s s o f t wa r e Can view each member on the screen as it’s marked and cut

AUTOMATED SOLUTIONS FOR WALL AND ROOF TRUSSES

Considerable labor sav ings

CONTACT SALES@MANGOTECH.COM.AU CONTACT SALES@MANGOTECH.COM.AU 1866GOMANGO

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Wood Truss Systems

inc.

Adverti$er

October 1st, 2014 #07183 PAGE #25

2008/09 IBS Wall Panel System

MANUFACTURERS’ REPRESENTATIVES

Interior or exterior wall panel production tables 6’-4” through 12’-3” wall height capacity to 20’ maximum panel length. Includes 20’ Sub-Component lay-out tables with optional Auto Stops, and skatewheel lift-outs, and short conveyor to (1) 20’ long IBS framing table with tool dollies, and dual 20’ Light Bars, (1) 20’ long squaring/sheathing table with Auto Router bridge and rough-opening stitcher tool, (1) 20’ long squaring/sheathing station with single-tool Auto-Bridge featuring beam tilt, joy-stick control, and optional dual stitcher tools. (4) four sets of powered IBS chain-drag conveyors, (1) IBS four-tool subcomponent nailer with conveyor, (1) 24” diameter Lauderdale Super Chop, 10 HP, up-cut saw with 20’ Tiger-Stop and roller conveyor, with Miter Saw Pan. Plant Net (w/o fiber optic cable & card), (6 ) IBS Plant Net terminal enclosures with stands, Saw Trax Panel Saw Model 2064, Safety Speed Cut with stand and wheels, two panel lift, support frame, and hoist assemblies. 230/460 volt, 3 phase and 120VAC electrical. 120 PSI air.

$249,600 FOB BC

765-751-9990

www.woodtrusssystems.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

Toll Free 800-382-0329

www.wasserman-associates.com

WizardPDS®

drop-in Channels™ Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.

Retro fit now - own it in 6 months!

Toll Free 800-382-0329

www.wasserman-associates.com

Used Truss & Wall Panel Equipment in Tennessee

Alpine 14' x 100' Roller Gantry System with Exiting Conveyor, Finish Roller & Outside Conveyor $ 40,000

$7,500 Alpine Kick-Leg Floor Truss Machine

Basic Automation Framing Table & Squaring Table with Panel Bridge $ 12,500

$148,000 Klaisler 14' x 50' End Eject Roller Gantry System with Wizard Automated Jigging Haulin 36'-50' Stretch Roll-Off Trailer

$13,000

$8,000 Klaisler RolSplicer

M ACdverti$er OMPONENT

ANUFACTURING

WALL PANEL EQUIPMENT

IBS Component Nailer, Component Tables & Conveyor •IBS Sub-Component Nailer with Bostitch Nail Guns •IBS Component Tables with Pop-up Skatewheel Conveyor •Hytrol Roller & Skatewheel Conveyor •IBS Handle Bar Router Frame Only •Excludes Plant Net Computer & Enclosure Equipment Information Manufacturer: IBS Location: Arizona Status: Standard Category: Wall Panel Price: $9,500 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Tell Them You Saw it in the M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Don’t Forget! YOU SAW IT IN THE WALL PANEL EQUIPMENT

Wright Panel Lift and Hoist Assembly Wright lift and hoist assembly . Includes (2) 1.5 HP trolley motors, (4) 500 lb. capacity hoists, capacity (1) ton. Was used for transferring wall panels to 12 feet in height. Distance between the hoists is 13'6" x 8'-0", the travel distance is 50 feet and the vertical travel distance is 15 feet. See video for demonstration. 220 volt, 3 phase electrical. $9,900 FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er WALL PANEL EQUIPMENT

Carlson Sub-Component Nailer Infeed/Outfeed Roller Conveyor. 3 Mounted Senco Nail Guns & 1 Loose Senco Nail Gun. $4,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2001 IBS 12' x 16' Framing Table •Tool Dollies with Duo-Fast Nail Guns •Motorized Wall Height Adjustments •Stud Locators on 16” & 24” Centers •Pop-Up Skatewheel Conveyor $18,500 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com 1998 Triad 10’x16’ Wall Panel Line Interior/Exterior Wall Panel Line. Triad GEN II 10' x 16' Framing Table with Tool Dollies. Triad GEN II 10' x 16' Squaring Table with Router Bridge. Triad GEN II 10' x 16' Sheathing Table with Panel Bridge & Top/Bottom Plate Fastening. 19 Paslode Staple Guns. Accumulation Roller Conveyor. Gantry Crane with Electric Hoist & Wall Panel Lift. Dismantled & Ready to Ship. $24,900 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Your Ad Could be Here

October 1st, 2014 #07183 PAGE #28 WALL PANEL EQUIPMENT

Panels Plus Wall Panel Framer Wall panel assembly equipment for wood or steel wall panels, floor-panels, and related framing components. The base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches. Design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality. Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages. Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge. Squaring stations, sub-component tables, conveyors and panel lifts are also available. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical. From $40,200 base price FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

www.mitek-usa.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

Toll Free 800-382-0329

www.wasserman-associates.com

NEW Monet DeSauw 12’ x 16’ Framing Table with Programmable Single Tool Panel Bridge

$58,000 FOB MO Includes Installation Support in the United States & Canada

• Stud Locators at 16" & 24" O.C. OPTIONS • Pop-up Skatewheel Conveyor • Add $1,750 for Handle Bar • Powered Height Adjustment (8' Router • Add $1,250 for Wall Panel Lift to 12' wall heights) (Excluding Hoist) • Adjustable Squaring Stops • Add $1,500 for 1 Pair of 15' • Excludes Tool Dollies ® Skatewheel Conveyor with PANEL BRIDGE Stands ™ drop-in Channels • Programmable Fastener Patterns• Add $3,750® for Sub-Component Old technology turned state-of-the-art with WizardPDS drop-in Channels™ with PLC Touch Pad Entry Layup Tables Your table + our technology = Zero Set up time and NO manual jigging. • Click on Photo 7 for Video

WizardPDS

the Video Here Retro fit nowWatch - own it in 6 months!

http://www.wasserman-associates.com/images/Item_Photos/MDProgrammableBridge1.MOV?PHPSESSID=76ucbqov4862721kdv69qn7hd6

M ACdverti$er OMPONENT

ANUFACTURING

TRUCKS & TRAILERS

2006 A Nu Prospect 53' Step Deck Roll Off Trailer Price: $42,890 :: FOB WI NEW ITEM! Condition: Good Description: 53' step deck trailer with GVWR of 77,000 lbs. Top deck height is 64", bottom deck height is 40". Unique "convertable" desigh allows for wall panel / building supplies / roof trusses to ship on one trailer or for long roof-trusses when hydraulic deck is lifted. Features split, locking rollers, right-side outrigger rollers for wide loads, hydraulic lift neck, LED lighting, straps to D-rings, and anti-lock brakes. Tires are good 70+ tread Trailer is currently in use, well maintained, and has current DOT inspection. $42,890 :: FOB WI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Donâ&#x20AC;&#x2122;t Forget! YOU SAW IT IN THE

Adverti$er

TRUCKS & TRAILERS

1994 36' OK Gooseneck Mfg. Trailer 1994 Oklahoma Gooseneck Manufacturing, 36' tandem axle gooseneck trailer with electric drum brakes, indicator lights, and 13/32 to 13/64 tread depth, integrated, manual "landing-gear". 20,000 lbs. load rating.Price: $4,890 :: FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Load Lifter T-40 Yard Carrier â&#x20AC;˘The T-40 Modular Yard Carrier can easily move a modular building off your production line to your staging area in minutes â&#x20AC;˘50,000 Lb Capacity â&#x20AC;˘70' Main Rail Length (78'-6" Overall Length) â&#x20AC;˘20" Vertical Lift â&#x20AC;˘18 HP Gas Engine Power Unit for All Hydraulics â&#x20AC;˘Rear Lift: Six 5 x 20 Cylinders â&#x20AC;˘Pintle Hitch Coupler â&#x20AC;˘Running Gear: Six 20,000 Lb Heavy Duty Agricultural Spindles & Hubs FOB NE:: $19,500. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2000 Prentice Telestik-33 Material Handler 32â&#x20AC;&#x2122;-10â&#x20AC;? Boom. 4,000 Lb Payload. Excludes Truck. $10,000 FOB GA. Wasserman & Associates 800-382-0329

NOBODYâ&#x20AC;&#x2122;S BETTER EQUIPPED

to help you

BE BETTER EQUIPPED TOO. Making sure you have the right equipment for your needs is something weâ&#x20AC;&#x2122;ve been doing GPS OFBSMZ ZFBST 8F IBWF UIF FYQFSJFODF JOEVTUSZ DPOUBDUT BOE CSPBE TDPQF UIJOLJOH UP IFMQ ZPV CF NPSF QSPEVDUJWF NPSF FĂłDJFOU and more profitable.

2014 Precision Equipment Roll-Off Trailers 40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System. Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extenda-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System. Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1993 ASI 40' Roll-Off Trailer Sliding Single Axle. No Hydraulic Neck. www.WoodTrussSystems.com XXX 8PPE5SVTT4ZTUFNT DPN t Spring Suspension. Air Brakes. Tires & Brakes are 80%. Roller Locks. $9,900 FOB WI. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

October 1st, 2014 #07183 PAGE #31 MISC.

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2010 Polar Air Rotary Screw Compressor, Dryer & Tank 20 HP rotary screw compressor with refrigerated dryer and 120 gallon storage tank included. 1,329 hours logged. 208/230v power. Price: $8,490 :: FOB NB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

MISC.

New SL Laser Projection System New, laser projection system from SL Laser. Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights). Includes system computer, cables, mounting hardware for attachment to customer's structure, factory installation, training and choice of green or red laser. Works with each connector plate manufacturer's design software. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2007 SL Laser One-Head System Single head, green laser projection system from SL Laser, model SL4002-05 GBPU, reviewed by OEM but not reinstalled. Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights). Works with each connector plate manufacturer's design software. This unit can be used for projecting a single area or the modular nature of the laser head allows for easy integration into an existing SL projection system. In any case, a software update by OEM is required before installation. Includes system computer, all available cables and mounting hardware for attachment to customer's structure. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. (OEM installation and training available at additional cost.) $18,690 :: FOB BC Wood Truss Systems 765-751-9990 PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE

Adverti$er

MISC.

2005 Atlas Copco GA18 Rotary Screw Compressor Atlas Copco, model GA18, 25 HP rotary screw compressor with integrated air dryer and tank. Unit features oil injected lubrication, air cooled, digital display, 3,600 RPM motor, free air 99 CFM and maximum final pressure 132 PSI. 480 volt, 3 phase electrical. Price: $7,990 :: FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Pacific Automation Infeed Deck Pacific Automation 5-arm indeed deck, 15’ x 22’ footprint, features 5 HP gear motor, heavy-duty chains, tubular steel construction, sealed bearings, and foot pedal controls. 26" high, weight 7,000 lbs. 440 volt, 3 phase electrical. $4,900 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

MISC.

2009 EnDiSys / Graco Foam Insulation System EnDiSys Model 3004240B. Skid Mounted Graco Reactor H-25 Hydraulic, Heated, Plural Component Proportioner. Maximum Flow Rate: 22 Lb/Min. Maximum Fluid Working Pressure: 2,000 PSI. Reactor Portable Dispense System (Manual Contol). 230 Volt / 3 Phase. Two 100 Gallon Heated Tanks. Drum Agitators (Both Sides). Feed Pumps. Recirculation System for Hose and Reactor. 150’ Heated Hose with 10’ Whip. Out of Service (Stored Inside). $19,500 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt). •Pressure Pump & Vessel. •Lightly Used. •Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

October 1st, 2014 #07183 PAGE #32 MISC.

2008 OMGA Finger Jointing Line Price: $29,900 :: FOB CO Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, OMGA INK F-100 glue station, and TITEN finish planer of unknown age, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2008 AeroGo Load Beams Air Caster Load Beams (for moving modular home sections). Two Aero-Caster Load Modules connected by an Adjustable Telescopic Tube. Lightly Used (Once or Twice). Capacity: 7 Ton Each. 36 Load Beams Available. $50,000 for all or $1,700 each. FOB AL. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

JobLine.com, inc.

The

800-289-JOBS

Cross Manufacturing Lumber Splicer Custom manufactured 7.5 HP hydraulic lumber splicer with maximum plate size of We’re here when you need help! 10" x 11". Dual hand controls and reservoir.. visit: www.thejobline.com 208/240/460 volt, 3 phase power. $4,890 :: email: mail@thejobline.com FOB TN. or call Thomas McAnally Wood Truss Systems for Personalized Service 765-751-9990 STRICTLY CONFIDENTIAL! www.woodtrusssystems.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Time To Hire?

Hain 20' Powered Measuring System •Adapts to Any Saw •Left or Right Hand Operation •Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers) •Motor: 1/4 HP Linear Actuator (110 Volt) •Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion •Stops: Jig Bored Steel •Stop Blocks: Machine Billet Aluminum •Optional Lengths from 5’ to 60’ •Optional Gang Stop •Add $770.00 per 10’ Section of Heavt Duty Roller Conveyor with Stands Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

FOR SOME GUYS, IT’S FAST CARS. FOR OTHERS, IT’S BEAUTIFUL WOMEN. FOR US, IT’S LASER-GUIDED LUMBER RETRIEVAL.

Our WoodRunner™ lumber retrieval system not only reduces labor by a half over manual saw feeding, it increases productivity by 30%. And, it’s compatible with any new or existing linear saw. Now, who wouldn’t be a little passionate about all that? Visit www.apexmw.com www.apexmw.com or call 507-322-3700 to learn more today.

Page 33

Component Manufacturing Advertiser

October 1st, 2014

M ACdverti$er OMPONENT

ANUFACTURING

MISC.

Don’t Forget! YOU SAW IT IN THE MISC.

Adverti$er Door & Stair

October 1st, 2014 #07183 PAGE #34 Door & Stair

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Refurbished 2005 Hain 20Ft. Measuring System 2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.

$22,677 FOB FL | AS NEW

765-751-9990

2010 Polar Air Rotary Screw Compressor, Dryer & Tank 20 HP rotary screw compressor with refrigerated dryer and 120 gallon storage tank included. 208/230v power. Price: $8,490 :: FOB NB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $14,250. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

www.woodtrusssystems.com

Palatek 25 HP Rotary Screw Air Compressor with Atlas Copco Air Dryer -Palatek Model 25D4 Air Compressor -25 HP Motor (230/460 Volt-3 Phase) -95 CFM at 125 PSI -13,111 Hours on Air Compressor -2007 Atlas Copco Model FX Refrigerated Air Dryer (115 Volt-1 Phase) -Air Storage Tank $6,000 FOB KS. Wasserman & Associates 800-382-0329

2003 Triad Smart Stair Router System CNC (computer numeric controls), menudriven machine cuts 2x10 & 2x12 standard stair profiles w/touch screen controls. Two HD routers cut top or bottom stringer only, or both stringers simultaneously. Smart Stair Router accommodates standard stair profiles, no riser profiles, split stringers & open stringers with hardwood or softwood settings; cuts top or bottom stringers or both simultaneously. Features (2) HD 2 HP belt driven routers w/1/2" capacity collets, (2) stepper linear actuators for cutting profiles, (1) servo/stepper drive wheel for indexing, 628 lb. vertical clamp, 352 lb. horizontal clamp, industrial computer, and 4-axis motion controller. System includes 2260 Wedge & Glue Block Cutter to mix stacks of 1x and 2x materials in the same hopper. Cuts (2) wedges out of 1x material and (1) wedge out of 2x material w/walkaway hands-free operation. Capable of cutting glue blocks; bag-style dust-vacuum system included. Includes Triad stair assembly clamp for easy jigging of staircase assemblies. Accomodates up to 16 risers with a maximum width of 50". Price: $52,750 $47,750 :: FOB PA Wood Truss Systems 765-751-9990

BAM CNC Stair Router Saw Reman 03/08. Builders Automation Machinery [BAM] model CNC/MFSR stair router. Contemporary, box & open stairs, the only machine available that also cuts the top and bottom landings. Programmable with a large library already in the machine for most all box and open stringers. Remanufactured includes new wiring, rebuilt spindle motors, new drives & is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. One year warranty. Setup is free of labor charges we do charge airfare and per diem for setup and training. Portable 4 bag, 3 phase vacuum switched on at the machine controls is available for $1,568. Installation by the OEM available at an additional charge. 230 volt, 3 phase, 60 amp electrical requirements and 120 p.s.i. and 35 CFM air requirements. Price: $56,667 :: FOB FL Wasserman & Associates 800-382-0329

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Norfield Vertical Door Loader -2,800 Lb Capacity -48" Stack Height -480 Volt / 3 Phase Location: TX Price: $7,900.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Builders Automation Template Stair Router •Model RUWO 2000 MFSR •Cut Box and Open Stringers •Manual Setup with Auto Feed and Cut •One or Two Stringers per Cycle •10’ Infeed and 10’ Outfeed Roller Conveyor with Stands •2 Bag Dust Collector •(2) Lift Tables for Staircase Assembly •240 Volt / 3 Phase Price: $25,600 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Norfield Pro Door Machine with Door Cut-Off Saw Norfield Pro Door & Jamb Machine Width: Doors to 3-0, Jambs to 10 1/2” Height: Doors to 7-0, Jambs to 7-0 Thickness: Doors to 1 3/4”, Jambs to 1 1/8” Butt Sizes to 4” x 4” Butt Spacing: Infinitely Variable Lock Backsets from 2 3/8” to 5” 230 Volt/3 Phase/ 50 Amp and 230 Volt/1 Phase/20 Amps Norfield Model 3600 Door Cut-Off Saw Maximum Door Width: 4-0 Maximum Door Length: 9-0 Maximum Door Thickness: 2 1/4” Saw Blades: 2 at 8” 230 Volt/1 Phase/20 Amp/5.5 HP $6,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Production/Design/Location Manager Truss/EWP/Package Relocation: California Design and manage all truss operations. purchase all lumber and plates. Arrange payment and shipping. Troubleshoot every aspect including machinery. Implemented our OSHA safety plan and requirements. Print invoices and remove material from active inventory using peach tree software. Set up new customer accounts and validate credit references. Design wood and steel joists and headers. Assist customer project problems for the best economical and practical solution. Prior: Truss design and supervise. Purchase building material. Arrange billing and shipping from start to finish. From the small detached garage to the large apartment complex, I have done them all... Txt: C12276 to 406-210-1226 or call 800-289-5627 x1 Outside Sales/Management - Truss Relocation: Houston Texas Manage the daily function of my sales team, to insure the my team has the tools and the resources they need to reach goals set by the company and their individual goals as well. I have 3 outside sales personnel and 2 inside. Make routine trips to help the team close certain jobs. Work closely with our estimating department to make sure all quotes are handled in a timely manner and with the production team on delivery schedules. Txt: C12256 to 406-210-1226 or call 800-289-5627 x1 Designer/Estimator - Remote Location: Iowa or Remote Inside sales & estimating, blueprint reading, customer relations & service, product support, product & job management, problem solving, load transfer, mechanical & technical math, research & design, multitasking, detailing, technical writing, data entry, supply and material management. Software: MiTek, AutoCAD, Microsoft Office. Products: Roof & Floor Trusses, EWP, I-Joists, Beams. Prior WTCA III, Associates in CAD. Txt: C12253 to 406-210-1226 or call 800-289-5627 x1 Designer/Design Manager Truss/Panel/I-Joist/Stairs/EWP Relocation: Ohio 18 years Design experience with 3 as a Senior Designer. Primary duties: design, layout, and optimization. Secondary duties: checking others work and repairs. Software used: Robbins, Keymark, and AutoCAD. Component experience includes floor trusses, roof trusses, wall panels, I-Joists, and hardware. Market experience includes tract, single family, single family custom, multi-family, and agriculture. My volume was varied depending on projects. ID: C11856 PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE

Adverti$er

October 1st, 2014 #07183 PAGE #35

Hiring Zone - Available Candidates Remote Truss Designer - Multifamily Senior Designer - Truss/Panel/Packages Relocation: Colorado, Delaware, Florida, Relocation: California or Remote Design The .com, inc. Maryland, North Carolina, Virginia, As Truss Design Dept. Manager for Washington DC designers at multiple locations. Primary Overview: Well rounded candidate duties; Reporting to the plant manager, on who worked from a design job through top of managing a department of 13 to 15 supervision, to location management. people, which includes the administration Candidate is very technical, MiTek Sapphire duties for the department as well as training experience. Looking for an opportunity to newer designers, hiring, releasing, internal work remotely. policies and customer interaction in the Txt: C12044 to 406-210-1226 beginning and throughout to the end of the or call 800-289-5627 x1 project. Customer consultant and problem solver. Consultant to architects, engineers Truss Designer - Remote Designer - Truss. Primary duties: design, and local, state and federal jurisdictions. layout, optimization, and cutting/production documents. Secondary duties: checking As Senior Designer: Truss design and others work, scheduling, repairs, customer bidding for primarily commercial projects, service, inside sales, field measurements, layouts, manifests, delivery lists, shop s o f t w a r e m a i n t e n a n c e , n e t w o r k drawings, extensive customer contact, administration, training, and filling in for and field relations along with inventory. We’re here when you need help! the design manager as needed. Software Extensively worked with DSA for schools. visit: www.thejobline.com used: MiTek, TJ Expert, and AutoCAD. Formatted and wrote many of the programs email: mail@thejobline.com Component experience includes floor and forms that were used in the bidding and trusses, roof trusses, wall panels, I-Joists, design stages. Utilized the Uniform Building or call Thomas McAnally EWP, hardware, and lumber. Market Code in design practices. Extensive use of for Personalized Service experience includes tract, single family, AutoCad, MiTek, and many of the Microsoft STRICTLY CONFIDENTIAL! single family custom, multi-family, light software programs. Candidates seeking jobs: Txt: C12255 to 406-210-1226 commercial, and agriculture. My volume or call 800-289-5627 x1 was varied depending on projects, but I sold theJobLine.com, Inc. around 100k per month. Relocation: USA - ALL States The JobLine specializes in Txt: C12344 to 406-210-1226 recruiting and placing professionals or call 800-289-5627 x1 Truss Plant/Location/General Manager in the LBM, Engineered Wood Production/Design/Location Manager - Truss and Components Plant Manager with Truss/EWP/Package over 15 years of experience in the truss Products, Truss, Wall Panel, and industry who is looking to apply knowledge Modular industries. Design and manage all truss operations. gained while continuing to develop and A s t h e C a n d i d a t e ’s purchase all lumber and plates. Arrange grow within the management sector. intermediary, our process is unique, payment and shipping. Troubleshoot every aspect including machinery. Implemented As Plant Manager: Create programs to doesn’t require a resume, and only our OSHA safety plan and requirements. motivate employees to achieve peak presents a you to an employer if Print invoices and remove material from productivity. Hire, train, discipline and active inventory using peach tree software. terminate employees. Order lumber and all you approve. To be considered, Set up new customer accounts and validate production materiel. Coordinate weekly every candidate must create and credit references. Design wood and steel production, sales and safety meetings. maintain a JobLine Candidate joists and headers. Assist customer project Research cost on purchasing new equipment. Profile. It’s easy and on line. Just problems for the best economical and Attended monthly city council meetings to practical solution. ensure codes were followed. Oversee click on the New Candidate tab development of truss fabrication facility. at the top of the page. Take your Prior: Truss design and supervise. Purchase Ensure compliance with Cal OSHA and time and be thorough. It’s a tool building material. Arrange billing and Dot. Oversee shipping and optimize freight for your future! You can create, shipping from start to finish. From the costs. Responsible for training leads and small detached garage to the large apartment supervisors on company policy’s. Program save, and update at any time. You can also specify your job, complex, I have done them all... and operate computerized equipment.

JobLine

800-289-JOBS

Time To Hire?

Relocation: CA ID: C12276 ATTENTION EMPLOYERS We have over 1,000 registered Industry Professionals. All Job Searches are not public! We can search behind the scenes to find the right candidate for your opportunity. See what I can do for you!

Thomas McAnally 800-289-5627 x1 twm@thejobline.com

Proficient with Microsoft Programs, Excel, Word, Outlook, ERP software Team growth and development through effective feedback and ongoing mentorship Excellent communication skills Experience working with: Metal, Polymer Blends, Components, Finished Product Assembly, Clean Room, etc. Tenacious, Professional, Detail-Oriented, Strong Sense of Urgency Lean Manufacturing Certified, Kaizen Trained, Fork lift Certified Relocation: Arizona, Arkansas, California, Colorado, Florida, Hawaii, New Mexico, Texas, USA - ALL States Txt: C10500 to 406-210-1226 or call 800-289-5627 x1

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

location, and compensation goals. Our Recruiters are personally committed to helping you find opportunities that fit your goals.

To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab. FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Safety First! Safety Meeting Topics From State Fund CA.

Types of Injuries How Workers Get Hurt Accidents can happen anywhere and at any time. Many workplace accidents and injuries can be prevented if workers know the causes of accidents and they are taught how to protect themselves to avoid injury. Although no one wants to get hurt at work, there are four major causes for injuries on the job.

Back injuries

October 1st, 2014 #07183 PAGE #36

Adverti$er Cómo se Lesionan los Trabajadores

Los accidentes pueden ocurrir dondequiera y en cualquier momento. Muchos accidentes de trabajo pueden prevenirse si los trabajadores conocen sus causas y se les enseña cómo protegerse para evitar lesiones. Aunque nadie desea sufrir una lesión en el lugar de trabajo, dichas lesiones se deben a cuatro causas primarias.

Lesiones de la espalda La causa número uno de lesiones en el lugar de trabajo es la sobrecarga física. Estas lesiones son ocasionadas al levantar objetos (cargas demasiado pesadas o levantamiento inadecuado), realizar un gran esfuerzo físico, intentar realizar demasiadas actividades, o al doblar o torcer la espalda. Para evitar lesiones de la espalda, aprenda y emplee técnicas adecuadas de levantamiento, nunca doble o tuerza la espalda al levantar o transportar objetos, haga uso de dispositivos mecánicos o pida ayuda a un compañero de trabajo.

The number one cause of on-the-job injuries is physical overload. These injuries are cause by lifting (too Golpes contra objetos heavy a load or lifting improperly), straining, overreaching, bending, and twisting. To protect your back against injury, learn and use proper La segunda causa más común de lesiones en el lugar de trabajo lifting techniques, never bend or twist while lifting or carrying, and son los golpes contra objetos. La mejor forma de protegerse contra whenever possible, use a mechanical aid or get help with the load from estos accidentes consiste en mantenerse alerta en torno a los peligros another worker. potenciales y usar el equipo de protección apropiado (cascos protectores, protección para los ojos, guantes). Esté consciente de su cuerpo y del Hitting or striking against espacio libre alrededor suyo. Mantenga una distancia prudencial al The second most common cause of worker injury is being hit by or agacharse o desplazarse por debajo de los equipos, o al pasar por pasillos hitting against an object. The best way to protect against these accidents de dimensiones reducidas. is to be alert to the potential hazards and to use appropriate protective Caídas equipment (hard hats, eye protection, gloves). Be aware of your body and the space around you. Give yourself enough clearance when passing Para evitar las lesiones debidas a caídas, apoye bien los pies sobre by or ducking under equipment or going through a passageway. el suelo y use zapatos con suelas antirresbalones. Camine con cuidado.

Falls

No camine de espaldas ni salte de un nivel a otro. Compruebe que lo que lleva cargado no le obstaculiza la visibilidad, y que el camino esté bien iluminado y sin obstáculos. Limpie los derrames o manchas de grasa y use los pasamanos al caminar por escaleras.

To avoid injuries from falls, be sure that your footing is firm and wear slip-resistant soled shoes. Watch where youre walking. Dont walk backward to direct equipment or leap from one level to another. Make sure you can see over the Accidentes con máquinas load you carry and that walkways are well-lighted and clear of obstacles. Clean up spills or grease spots and use handrails when La cuarta causa más común de lesiones en el lugar de trabajo la walking on stairs. constituyen los accidentes con máquinas, es decir, accidentes que se producen al ser atrapado por las piezas móviles de una máquina. Cuando Machine Accidents trabaje cerca de cualquier equipo móvil (máquinas rotativas, cintas The fourth major cause of on-the-job injury is machine-related transportadoras o prensas) use siempre protectores de seguridad, cubiertas accidents, that is, getting caught by moving machine parts. When working y procedimientos de bloqueo. Sólo use las máquinas para las cuales haya around any moving equipment (a machine that rotates, slides, or presses) recibido capacitación. Nunca tenga puesto joyerías ni ropa holgada que always use safety shields, guards, and lock-out procedures. Only work puedan prenderse en un equipo en movimiento. on a machine that you have been trained to use. Never wear jewelry or Manténgase alerta sobre los peligros a los que está expuesto en loose-fitting clothing that could get caught in the moving equipment. su trabajo, aprenda qué debe hacer para protegerse contra accidentes Be alert to the hazards you face on your job and learn what you y lesiones, y siga las pautas de seguridad establecidas en su empresa. should do to protect yourself against accidents and injuries and follow your companys established safety guidelines. The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

October 1st, 2014 #07183 PAGE #37

Don’t Forget! YOU SAW IT IN THE

Adverti$er

new equipment showcase

800-382-0329

Wood Truss Systems

inc.

765-751-9990

www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Tired of service agreements?

We have been associated with selling lasers in the wood component industry for over 20 years, dating back to the pioneering truss company in Maple, Ontario. We are big believers in laser projection and have sold systems new and used in the USA, Canada, Australia, and China. In our experience we can easily say that S-L Laser is the best when it comes to customer support and service; they are also the most economical to operate over the life of the system. S-L Laser USA is a company with world class technology based in North Carolina. Cut labor, improve quality, without expensive and time consuming modifications to your existing equipment.

Monet DeSauw FWA 500 Floor Web Cutter

•Push Button Powered Blade Angulations •Single Push Button Setting for 2 Blades per Side •Electronic Digital Readouts •Backup Mechanical Indicators •Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks •Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber •12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) •60 Pieces per Minute •(4) Internal 16” Blades & (1) External 16” Cut-Off Blade •Pneumatic Blade Brake on External Blade •Dust Hoods •Vibrating Waste Conveyor (under saw) •Add $3,600 for 12’ Incline Waste Conveyor (adjacent to saw) •Add $1,700 for Extra Set of Blades •Single Sided Setup is available at Additional Cost •480 Volt / 3 Phase

$47,000 FOB MO

www.wasserman-associates.com PHONE: 800-289-5627

Business & Professional Services Listings

A full year subscription is only C$225 Access Madison’s freshly-updated database of Canadian lumber producers conveniently through your internet browser. As always: with extensive, detailed listings of all Canadian sawmills and remanufacturers, panel, pulp and paper mills, and wholesalers Be up-to-the minute on the full spectrum of company information, including: species handled, product mix, rough and surfaced sizes, production volumes, kiln capacity, number of employees, grading agency mill number, and much more

SIGN UP TODAY Each listing in our database has been completely revamped! Don’t go without this vital information at your fingertips. Madison’s Lumber Reporter | madrep@shawcable.com | 604 984-6838

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

October 1st, 2014 #07183 PAGE #38

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Business & Professional Services Listings

Advertiser Trivia Answers

Page 5 = Hydrogen Page 24 - the letter “e” Page 25 = where the “3” and “4” sides meet Page 27 = Over 4” Thanks for playing along!

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400

CDean@ComponentRunner.com Used Equipment Wanted! Floor Truss Machines Floor Truss Web Saw

Before You Buy Equipment!

765-751-9990

Save tens of thousands of dollars by first getting a complete assessment of all your current and future needs with a lean manufacturing consultation. Ö Unbiased, pro versus con assessment

of all manufacturing equipment Ö No referral fees or commissions from the plate or equipment vendors Ö Onsite consulting services for the wood truss and wall panel industry

ALS or Miser Linear Saws Ciber AT, ServerOmni or AutoMill Trackless Roller Gantry Systems Lumber (Chord) Splicers Triad “Diamond Quad” Framing Tables Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment 42’-70’ Stretch Roll-Off Trailers Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Planx or Wizard Jigging Systems SL Laser or Virtek Laser Projection Systems Field Repair Press Stationary Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Toll Free: 800-382-0329 www.wasserman-associates.com COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Our Advertising Rates will

Blow You Away!

NORMAL NET PROFIT GAINS ARE 3 TO 6 POINTS! 9 75+ 75+ Clients - See Web Site for Testimonials 9 10+ 10+ Years Consultant Services All Areas Covered - 50% Shop / 50% Office

9 25+ 25+ Years in Truss Industry Todd Drummond Consulting, LLC www.toddwww.todd-drummond.com todd@toddtodd@todd-drummond.com Phone 603603-763763-8857 PHONE: 800-289-5627

Thomas McAnally - Publisher 800-289-5627 x1

CALL NOW!

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

tmcanally@componentadvertiser.com

www.componentadvertiser.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Adverti$er

October 1st, 2014 #07183 PAGE #39

Tell Keta you saw it in The Advertiser and get a 15% discount through October 15th

(Regular deadline was August 1st!)

PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

www.mii.com/MiTekAssurance

www.MiTek-us.com Page 40

Component Manufacturing Advertiser

October 1st, 2014