October 2015 Advertiser by Component Manufacturing Advertiser

A #

195

PUBLISHED MONTHLY October 1st 2015 #08195

Component Manufacturing dverti$er

Serving the Structural Building Components Industry

Inside:

Question of the Day: Used Equipment:

page 3

Industry News Links:

page 32

Laymans Lumber Guide:

page 33

Saws page 4 Truss Equipment Page 13 Panel Equipment Page 22 Trucks & Trailers Page 27 Misc. Page 28 Door and Stair Equipment Page 31 Parts House Page 32

Safety First Topics in English/Spanish

page 39

JobLine Hiring Zone: Available Jobs Available Candidates

Business Directory:

page 41 page 45

Page 2

www.mitek-us.com/planxreview

Component Manufacturing Advertiser

October 1st, 2015

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #3

Don’t Forget! You Saw it in the

Adverti$er

Question of the Day

Published Monthly Editor/Publisher

Thomas McAnally tmcanally@componentadvertiser.com

By: Stan Sias

Question of the Day Gable End Frame Connections and Bracing

Advertising

Thomas McAnally 800-289-5627 x1

Distributed FREE

Stan Sias - National Manager Plated Truss Industry at Simpson Strong-Tie I was asked recently why Component Manufacturers (CMs) do not provide the bracing details and holdowns for gable end frames like they do for the common trusses. The question got me thinking because the details are readily available, as are any mechanical connectors that might be needed to complete the specification and/or installation. I wondered if the installers simply gave up reading once they saw how to restrain and brace the commons. It also got me thinking about how often we see post storm wind event news coverage where the gable end frames have been blown off, or sucked off, the supporting exterior wall below, often at recorded wind speeds well below design wind loads. Why is this happening and what can we do to prevent it?

via e-mail subscription or on line at www.componentadvertiser.com

Download FREE and

subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources. Deadline is the 25th of each month.

Let’s take a look at what is involved in specifying Gable End Frame connections and bracing and the resources readily available to assist you with this task. After all, it is the scene depicted in the two images below that we want to avoid before, during and after a wind event.

Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011-20122013-2014-2015

Component Manufacturing Advertiser a division of

JobLine, Inc.

the

Source: disastersafety.org

1723 Colonial Drive Green Cove Springs, FL. 32043

Source: Brainerd Dispatch

In designing a bracing system for a gable end wall application we need to look at two separate

no reproduction in whole and distinct functions. First, we need to brace the top of the gable wall itself as without it the gable or in part without permission wall is free to move in and out at will. In the completed structure, the gable end wall and gable from the component advertiser end frame above it will be subjected to loads (wind and seismic) both parallel and perpendicular their direction (see Figure B8-6 below).

eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com PHONE: 800-289-5627

When wind or seismic forces act upon the structure, it attempts to resist the sliding and overturning forces via the sheathing, connections, bearing walls and diaphragms.

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #4

Don’t Forget! You Saw it in the

Adverti$er

Question of the Day: Gable End Frame Connections and Bracing From page #3

SAWS

The industry standard, Building Component Safety Information (BCSI), Guide to Good Practice for Handling, Installing, Restraining & Bracing of Metal Plate Connected Wood Trusses provides guidance for bracing the joint between the wall and gable end frame. It is typically accomplished with lateral restraints and diagonal bracing in a means similar to the detail in BCSI‐B3, Figure B3‐35, shown below.

2006 Alpine PF90 AutoMark System •Wall Panel Plate Cutting & Marking Saw •Touch Screen Interface •Automated Length Stop & Ink Jet Printer as directed by Design Software Output •Cuts & Marks Both Top & Bottom Plates Simultaneously •24’ Infeed and 16’ Outfeed Table •10 HP Motor with 20” Blade •240 Volt / 3 Phase $29,500 FOB FL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1999 MiTek Cyber Saw Frame #094, fully automated five-blade component saw. Cutting performed by (2) 16” X 6 HP, (2) 20” X 6 HP and (1) 32” X 12.5 HP blades, with Dell PC upgrade featuring Windows XP and touch screen controls for fully automated part input, all powered movements, cuts 2x4 through 2x12” and 4x2”. Lengths cut from 15 inches (90/90) to 20 feet. Includes scrap conveyor (no incline). Recently inspected by OEM, currently not under power. 220 volt, 3 phase electrical. $26,890 FOB NY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

The restraint and bracing detail above works to eliminate the failure mode depicted in Figure B3‐33 right. Be aware that the forces depicted in Fig. 32 & 33 could be acting in either direction, positive as shown or negative as a sucking force pulling the connection outward.

Question of the Day: Gable End Frame Connections and Bracing continues page #5

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

2002 Omni Mini-Miser Saw Automated Wall Panel Component Cutting & Layout. 5 HP Motor with 14” Blade. Ink Jet Printing System (2 Faces & 1 Edge). Bulk Feeder. Incline Live Deck. 7 Magazine Feeders (3-2x4, 3-2x6 & 1-2x8). Installation Available (quote upon request). $35,900 FOB MN. Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SAWS

2005 Alpine AutoMill SC Saw Five-blade, servo-controlled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. It has 23 axes of automated movement, enhanced diagnostics, auto management reporting. The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [4] 18" and [1] 32" blades with air brakes, yellow outfeed skatewheel conveyors and pc, carriage and cabinet compressed air connections (for cooling & dust buildup prevention). Installed and operational. 480v/60Hz/3Ph power. Price: $89,990 :: FOB TX. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Maximizer Technologies Max Custom Cutter Model WA420 (4 High - 20’ Capacity). Automated Length & Angle Function as directed by Truss Design Software. Touch Screen Operation. 6.17 HP Motor with 25.6” Blade. 220 Volt / 3 Phase. Installation & Operator Training available at additional cost. Microcom Model 400 Label Printer $40,500 NOW $36,500 FOB KS. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Don’t Forget! You Saw it in the

Adverti$er

Question of the Day: Gable End Frame Connections and Bracing From page #4

Secondly, and certainly no less important at least from an aesthetic perspective, we often need to brace the gable end frame studs themselves. It is very common for gable end frames delivered with roof trusses to have their studs oriented flatwise in the plane of the gable. The flatwise studs (vertical webs) are designed to transfer vertical loads only to (or from) the bearing structure below. Loads acting perpendicular to these studs must be resisted by vertical and/or horizontal reinforcement along with diagonal bracing to the roof or ceiling structural diaphragms. BCSI details individual web member reinforcement options in Section B3, Permanent Restraint/Bracing (in addition to the BCSI‐B3 Summary Sheet). Gable end frame stud reinforcement specification is the responsibility of the Truss Designer. This may be done on the Gable End Frame Truss Design Drawing (TDD) or on a supplemental detail. These details will always have the Design Assumptions specified, including: wind speed, duration factor, Building Exposure, Category and Maximum Mean roof Height, all as specified by the Building Designer. Truss Designers provide these standard details to the Building Designers to assist them in determining the bracing required to transfer the lateral loads into the targeted diaphragm(s).

Check out the new

Parts House Section on Page 32! PHONE: 800-289-5627

October 1st, 2015 #08195 Page #5

Question of the Day: Gable End Frame Connections and Bracing continues page #5

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

CONNECTORS

INTEGRATED COMPONENT Systems

Look to Simpson Strong-Tie for your system solutions. Our growing product line is a direct result of listening to the needs of our customers and staying true to our core strengths of exceptional customer service, product innovation and testing, and manufacturing to the highest quality standards. ÂŠ 2015 Simpson Strong-Tie Company Inc. SBC14

SSTM_SBC14R_16x9_3-4.indd All Pages

LATERAL Systems

FASTENING Systems

Let us help you with your next job. Contact your local rep at (800) 999-5099 and visit our website strongtie.com. www.strongtie.com/ics.

9/21/15 11:52 AM

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #8

Don’t Forget! You Saw it in the

Question of the Day: Gable End Frame Connections and Bracing From page #7

Adverti$er

SAWS

The Standard Gable Bracing Details will have a table that shows the requirements for reinforcement or diagonal bracing based on the maximum stud length. These can vary from no requirements for relatively short studs to up to two sets of horizontal ‘L’ reinforcements with their associated diagonal braces per Section A‐A above.

The Building Designer may, in addition to the lateral restraint and diagonal bracing details, specify a structural connector between the gable end frame and the supporting wall/structure below. These could include a variety of connectors based on the desired intent and anticipated flow of loads. Some options include: LPT4 LPT5 RBC RBCP HGA10

Other details may include structural screws and/or metal straps. In lieu of project specific details for attaching and bracing gable end frames being provided by the Building Designer, Component Manufacturers would be well served to consistently provide the standard industry details referenced above as part of their jobsite submittal packages. I would be happy to review and discuss the content of your jobsite packages at your convenience. Thanks for reading, SKS The SAWS

JobLine.com, inc.

800-289-JOBS

2003 Omni Miser Saw •Automated Wood Processing System •Lengths to 16’ •Ink Jet Print System A (One Face) •Incline Live Deck •Bunk Feeder •(5) 2x4 Magazines •Installation & Training is available at additional cost $67,500 NOW $49,500 FOB MN Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

2000 Auto-Omni Automated Component Saw Automated Setup as directed by Truss Design Software Output. Computer, Enclosure & Stand. Remote Monitor. 5 Blades cut 2x3 through 2x12 and 4x2 from 11” to 20’. Belt Waste Conveyor (under saw). Excludes Incline Waste Conveyor (adjacent to saw). Installation Available (quote upon request). $39,000 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2000 Monet DeSauw B500 XE Component Saw 2000 Monet Desauw B500 XE component saw features semi-automatic user interface with backup mechanical indicators. This saw comes complete with a 12' x 16' 4-arm CMF live in-feed deck. The B500 XE features grouped functions such as automatic blade alignment for chords or webs and automatic centerline adjustment of nominal board size. Other saw features include over travel protection, pneumatic blade brakes on all 5 blades, safety fencing, shaker pan scrap system, scrap incline, manual skate-wheel infeed stands, and spare set of blades. 18" minimum cut, 20' max. 480 volt, 3 phase. Price: $38,990 $34,900 :: FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2005 Onmi Miser RT Roof truss only. Features A-print one face side, auto-deck material feed, spare 16” blade. Price new was $175,000. $78,990 NOW $53,990 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #9

SAWS

2005 Apollo Saw with Mango Plate Marker 5.5 HP Motor with 18” Blade. Minimum Angle of 10 Degrees with 36” Stroke. Manual Saw Angulation with Air Brake on Turntable. Laser Pointer, Variable Stroke Limiter & Plexiglass Shield for Operator Safety. Automated 20’ Length Stop & Plate Positioner as directed By Design Software. Computer, Monitor & Cabinet Enclosure. MangoTech Plate Cutting & Marking Software. 30’ of Roller Conveyor with Stands. Add $11,285 for Touch Screen Computer Upgrade. Add $3,680 for 2 Day Onsite Installation & Training. Excludes Dust Collection System. $15,000 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #10

Excellent Customer Service and Productive Equipment Provide a Decisive Advantage Outstanding customer service and the productivity and durability of Alpine Equipment have enabled Warman Truss to grow consistently since its founding 17 years ago. Managing Partner Roy Bedient focuses on optimizing plant efficiency through equipment innovations and effective preventive maintenance programs. Since its establishment in 1998, Warman Truss has relied on the productivity and reliability of Alpine equipment to help build a highly successful business. Located in Warman, Saskatchewan, Warman Truss serves all of Saskatchewan and Alberta. The company has also completed work in Manitoba and British Columbia. Warman Truss produces standard and custom-made truss systems and I-joists for residential, commercial and agricultural buildings, as well as a select group of retail dealers. The firm’s portfolio also includes several allied building and construction industry businesses. Managing Partner Roy Bedient oversees all aspects of the production process. He has watched Warman Truss grow steadily to its current size of about 90 employees. The plant typically operates two shifts, and production has increased every year, even during the downturn. “Our business model is straightforward – we focus on what we know and do well,” said Bedient. “Service is at the forefront, and we have maintained many of our core customers from the first day they started with us. I’m a firm believer that if you serve customers well, they won’t go anywhere else.” Bedient installed Alpine equipment when the plant opened and is one of Alpine’s most loyal customers. Warman Truss now has 10 pieces of Alpine equipment, and Bedient credits Alpine’s equipment and strong technical support for helping the business grow. “We are one of the province’s leading truss suppliers and take pride in our state-of-the-art cutting and assembly equipment and software,” pointed out Bedient. “Alpine has always been a great fit for us, and we like the fact the equipment is well made, user-friendly, easy to maintain and has reliable software. The company is very responsive whenever we need support.” In late 2014, Warman Truss installed the ALS 276 Motion Control Upgrade on its eight-year-old saw, and employees are pleased with the results. “The saw is now 10 to 15 percent quicker and has been running smoothly since the upgrade,” said Bedient. “The new drives helped as well. The saw usually runs at least 12 hours a day, and we anticipate the upgrade will extend its life by at least five years.” According to Bedient, the upgrade process itself took only about a day and a half. “We like the truss-by-truss cutting and optimize-by-cost features. We don’t do a lot of beveling, but it’s nice to know it’s there if we need it.” To keep its equipment running smoothly, Warman Truss follows a rigorous preventive maintenance program, which is reviewed and updated regularly. “Our philosophy is to address issues and fix them right away before they become bigger problems,” he emphasized. “We have a simple maintenance program stressing cleanliness throughout the plant and make sure our equipment is as clean as possible. We also follow the maintenance recommendations in Alpine’s equipment manuals.” To further enhance plant productivity, Warman Truss installed Alpine’s eShop software about a year ago. “The program has increased our assembly and cutting productivity by about 30 percent,” noted Bedient. “The software has greatly enhanced our overall efficiency and enabled us to optimize our staffing levels.” PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

INCREASE PRODUCTIVITY— UPDATE YOUR ALS 276. Why Upgrade? • Increase saw speed • Reduce truss costs • Cut truss by truss • Avoid downtime • Extend service life

The Alpine ALS 276 linear saw has been a longtime industry leader when it comes to productive cutting. Alpine offers a new upgrade kit that increases the saw speed, optimizes material use and works with Windows® 7.

Upgrade Now!

(800) 521-9790 | alpineitw.com alpineitw.com

Alpine part number 37124 The motion control upgrade package is available now and takes only one day to install when using a qualified electrician.

Contact your local Alpine representative or Carlos Lozano at (800) 786-5006, ext. 4263 or clozano@alpineitw.com to order the upgrade kit. Page 11

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

SAWS

R P ed r u ice ct io n

SAWS

October 1st, 2015 #08195 Page #12

MiTek Combi Set Web Saw •Four Blades Cut Lengths from 2' to 16' •Waste & Incline Conveyor •Extra Set of Blades •220/440 Volt - 3 Phase $13,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Alpine AutoMill SC Saw Five-blade, servo-controlled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. It has 23 axes of automated movement, enhanced diagnostics, auto management reporting. The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [4] 18" and [1] 32" blades with air brakes, yellow outfeed skatewheel conveyors and pc, carriage and cabinet compressed air connections (for cooling & dust buildup prevention). Installed and operational. 480v/60Hz/3Ph power. Price: $89,990 :: FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2004 TCT 1100 Linear Saw Series 1100 linear saw features 3 HP, 3 phase saw motor with 20" carbide tip blade, 3 axis motion control system utilizing magnet servo motors. Cuts chords and webs from 2x4, 2x6 material. Saw is left feed and includes a pc with touch screen, Matthews Jet-A-Mark DOD 2002A inkjet printer, with 20' in-feed and 10' Outfeed OEM supplied conveyor. 230V, 3 Ph, 20 Amp service. Price: $49,900 NOW $39,900 FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2004 TCT 1100 Linear Saw Series 1100 linear saw features 3 HP, 3 phase saw motor with 20" carbide tip blade, 3 axis motion control system utilizing magnet servo motors. Cuts chords and webs from 2x4, 2x6 material. Saw is left feed and includes a pc with touch screen, Matthews Jet-A-Mark DOD 2002A inkjet printer, with 20' in-feed and 10' Outfeed OEM supplied conveyor. 230V, 3 Ph, 20 Amp service. $49,900 $39,900 :: FOB ONT. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

2006 Spida Automated Truss Saw Automated Stop & Automated Saw Rotation as directed by Truss Software. 5.5 HP Motor with 18” Blade. Angles from 10 Degrees to 170 Degrees. Length of Cut: 24”. Depth of Cut: 6”. Touch Screen Computer with Enclosure & Stand. 20’ Outfeed Table with Automated Stop. 10’ Infeed Roller Conveyor with Pneumatic Clamp. $25,000 NOW $22,900 FOB TN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Autozen Automation

Truss Equipment

Service and Parts On Site Service and Repair

817-666-0880

JobLine.com, inc.

The

800-289-JOBS

Truss Designers & Panel Designers

Available NOW! Screened, Tested,

Guaranteed! PHONE: 800-289-5627

anufacturing

Reconditioned 1995 Auto Omni Component Saw Price: $86,900 :: FOB OH Condition: Good+ 1995 Koskovich Auto Omni saw. 5-blade automated saw fully frame-off reconditioned to nearly new standard with upgrades in 2015. Includes shaker waste conveyor with factory side pans, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20’ to 9” @ 90°/90°, spare blades, remote monitor, full set of electronic spares and manual. New computer with updated software, flat screen monitor, entire saw is newly painted. Also included: Full 3-month parts warrantee if installation is performed by independent tech. Geoff Monger. 208/240/480 volt,3 phase, 100 Amp and 120 vac, 90 Amp electrical required. Photos show saw during restoration. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Clary Shortcutter Floor & Roof Truss Web Saw •Four 5 HP Cutting Heads •Cut 2x4 and 4x2 from 8” to ?? •Manual Length & Angle Adjustments •Powered Material Conveyor (up to 25 pieces per minute) •Overhead Material Hold Downs •Waste & Incline Conveyor $10,900 NOW $8,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com

• • • • •

Automills ALS 275, 276 and 286 SpeedCut Saws Manual Saws Automated/Manual Tables • Coast to Coast

• • • • • •

Maintenance Contracts Remote PC Support PC Repair Installations De-installations Servo Motor/Amplifier Rebuilding

www.AutozenAutomation.com

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er SAWS

October 1st, 2015 #08195 Page #13 TRUSS EQUIPMENT

800-382-0329 2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $49,900 FOB AB NOW $39,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Alpine AutoMill SC Automated Component Saw • Servo controlled for fast set-ups, accuracy and system diagnostics • 23 Axes of Automation • Ink Jet Printer • 1-20” Blade, 3-18” Blades & 1-32” Blade set-up in 2-15 seconds • Incline Waste Conveyor • Excludes Live Deck and Outfeed Skate Conveyor

$99,000 FOB AB

2004 TCT EZ Trimmer Model CT041-2000. New Variable Speed Drive & Push Cylinder with Linear Slide. 2x3, 2x4 & 2x6 Capacity, Double Bevels on Pitches from 0/12 thru 12/12. Cycle Time: 15 Pieces / Minute. Air: 9 CFM at 80 PSI. Electrical: 230 Volt / 3 Phase / 20 Amp / 5 HP Motor. $8,900 NOW $7,900 FOB FL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

1999 TimberMill 6-20 Pro Component Saw Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12” up to 20’-0”. Base Plane Referencing and Pivot Axis Elevation Direct Link: http://goo.gl/xaXNAw for Faster Setup and Greater Accuracy. Powered Angulation & Carriage. Single Sided Digital. Waste & Incline Conveyor. 480 Volt / 3 Phase. Excludes Live Deck. $25,000 FOB PA Wasserman & Associates www.wasserman-associates.com 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com

Inc $13,000 in Spare Parts

2008 Pacific Automation Floor Truss Gantry Pacific Automation Floor Truss Gantry LS - Side-eject, 40’ x 5’4” table, with single set-up. Builds floor trusses from 12” to 24” depth up to 32’ in length. System features a raised-rail design, gantry-head with wired remote control station, and 24 inch diameter roller that travels at 120 Fpm and includes dual park-stations, under-table air cylinders, on-table splicing, on-table plate staging, and pop-up ejector. One owner, low hours, 575V, 3 phase electrical service. $44,900 FOB AB. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1983 Jager Travelmatic Mini III Hydraulic Bridge Press Designed for smaller trusses the system is capable of handling 2”x4” and 4”x2” trusses with no adjustment, ideal for hips, jacks, and valley-sets. No finish press required, system consists of a 6’ x 40’ drilled & tapped steel table, table guided press head (trackless), with a 6’x12” press platten, riding operator platform and all available jig hardware. 575 volt, 3 phase electrical. Price: $13,890 :: FOB ON. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Check out the NEW

Parts House Section on Page 32! FAX: 800-524-4982

Your NEW source for MangoTechâ&#x20AC;&#x2122;s Automated Apollo Saw & Plate Markers

Contact Information: PH+1-866-647-7771 Sales@sq-1Design.com

Visit us at www.SQ-1Design.com

Your source for Roof Truss, Floor Truss and Wall Panel Equipment

To Our Valued Customers, As you may have heard, Australian based Multinail Machinery Pty acquired Spida Machinery and MangoTech Pty in 2013. In a effort to provide North American customers with improved local product support, advancements, and additional product offerings, Square 1 Design & Manufacture Inc. has been contracted to provide service and support for new and existing Spida and Mangotech products. Customers may continue to contact their local or national distributors for equipment needs or may contact Square 1 Design & Manufacture Inc. directly. Square 1 Design is gearing up for improved service and support, currently stocking a variety of the common replacement parts for both Spida Machineryâ&#x20AC;&#x2122;s CSS & CXM saws as well as the Mangotech product line including the Apollo Saws. Square 1 Design & Manufacture Inc will continue to provide our industry leading Roof and Floor Truss assembly equipment including: trackless roller presses, finish rollers, stackers, Rolsplicers as well as all of the Klaisler Mfg. product.

Contact Information: Square 1 Design & Manufacture Inc. PH+1-866-647-7771 Fax: +1-866-646-5771 Sales@Sq-1Design.com Kind Regards, Sean Hubbard C.E.O. Square 1 Design & Manufacture Inc. (Office) 866-647-7771 Ext 105 Sean@SQ-1Design.com

Visit us at www.SQ-1Design.com

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

MiTek/Tee-Lok Gantry System MiTek/Tee-Lok 102’ working length, side-eject, gantry system includes (1) 2006 MiTek 24” diameter gantry head, (1) 1996 Tee-Lok 20” diameter gantry head, (1) TeeLok 20” diameter finish roller press, (13) wood-top Tee-Lok tables with skate-wheel ejectors, (11) idle rollers, (10) stand-alone receivers and rail. Includes all available hardware. 220 volt, 3 phase electrical. $48,990 FOB FL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Pacific Automation Floor Gantry with Finish Roller & Stacker 2005 Pacific Automation 24” Diameter Floor Gantry (7 1/2 HP). Flat Park Section & Incline Ramp Park Section (for end eject). 40’ Table with Air Cylinder Clamping. Maximum Truss Length: 36’. Floor Truss Depth: 11 1/2” to 26”. Side Electors in Jig #1, End Eject Rollers in Jig #2. 2005 Pacific Automation Floor Truss Finish Roller. 2007 Pacific Automation Floor Truss Stacker. Stored outside under lumber tarps since 2011. $67,500 $62,500 FOB AB. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Alpine 34’ Floor Truss “Speed Roll” Gantry System Alpine 34’ Floor Truss “Speed Roll” Gantry System / 38’ Overhead Plate Rack / Air Clamping / Operated Indoors / Ready for Immediate Shipment. $15,500 FOB NH. Salter Associates 770-434-1006 www.salter.com PHONE: 800-289-5627

Don’t Forget! You Saw it in the

TRUSS EQUIPMENT

Refurbished 1997 CMF Tracked Gantry System 1997 side eject CMF tracked gantry system with 14’ by 93 ft. working length. Tables and finish roller press were refurbished in 2007. System features (13) plastic topped tables with slotted-steel bottom chords, (1) 24” CMF diameter gantry head, (1) CMF 24" finish roller press, (4) idler rollers, and all available receivers. 440 volt, 3 phase electrical. $43,890 :: FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er TRUSS EQUIPMENT

TRUSS EQUIPMENT

Design your own custom roof truss gantry! Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990

Alpine Speed Roll Model 47 Kick-Leg Floor Machine 1994 Alpine Speed Roll, Model 47, kick-leg floor machine. Serial number 14-12277-A. 40 feet overall length, 36 foot maximum length truss, builds floor-trusses from 10” inch to 24” inch truss depths. Includes one head with 18" diameter roll, two parking rail areas, and table with air cylinderclamp system. 480v, 3 phase power. (Plate rack shown is not available, vertical rack support stands are included). $8,400 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2007 Klaisler Tracked Gantry Head Klaisler Gantry with riding platform, 24" diameter roll, variable frequency drive and Sumitomo twin drives, Very low hours. 230/460v, 3 Ph. Price: $18,990 :: FOB SC NOW $12,890 Wood Truss Systems 765-751-9990 www.woodtrusssystems.com MiTek TK-8 Klincher 60' C-Clamp Systems MiTek TK-8, 20 ton C-clamp style press with 60’ working length floor-mounted jig filtering. Each system includes: support beam, manual trolley, counter balance arm with hydraulic reservoir. Three systems available. Price is per 60’ system. $6,900 each. FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

October 1st, 2015 #08195 Page #16

New Square 1 Floor Truss Finish Press New 2014 Square 1 floor truss finish roller press, four-foot* wide x 3 1/2” tall throat. Use of this process speeds assembly and transports finish truss away from the production area, adds quality and peace of mind for your finished floor trusses. The unique “uni-body” construction creates a ridged machine that does a final press of the connector plates for complete embedment into lumber, saving wear on your floor assembly machine. 14” diameter rolls, 7 1/2 HP motor, 80# chain, 114 FPM speed, emergency shut-off bars, chain and sprocket Klaisler Receiver Arms guards, integrated brake. Available options (27) Klaisler Receiver Arms include: *other roller widths, Heavy-Duty Date of Manufacture: 2005 & 2006 upgrade, gear motor drive, and soft start Excellent Condition controls at an additional charge. 208, 240, Reduced - $550 @ any quantity FOB GA 480 volt electrical. $15,750 FOB IN. Salter Associates Wood Truss Systems 770-434-1006 765-751-9990 www.salter.com www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com

Hydro-Air Mark-10 Mono-Press •Press Tonnage: 37.5 Tons •Platen Size: 10” x 18” •Lumber Size: 2x4 to 2x10 •Includes: Hydraulic Power Unit, Counterbalance Arm, Trolley & C-Clamp Press •Excludes: Overhead I-Beam, Electric Feed Rail & Pedestals (all available at additional cost) •480 Volt / 3 Phase $8,000 FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

TRUSS EQUIPMENT

2009 MiTek RailRider Floor Truss Machine MiTek RailRider floor truss gantry, sideeject system, 42 foot working length, 56 foot overall length, 24 inch diameter gantry roll. OEM options including: overhead plate rack, "A-side" flip jig, riding platform and joy stick control. Minimum depth truss 10 inches and the maximum depth 24 inches. Clamping fence actuated by air cylinders mounted under the table. System includes electrical s/o chord, masts, wire support cable. Machine is wired for 460 volt, 3 phase electrical service. $78,890 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

TRUSS EQUIPMENT

1986 Mid-Atlantic (Tee-Lok) Tracked Gantry Mid-Atlantic 75 foot working length roof gantry featuring one (1) 18” diameter roller gantry head with pendant controls, twelve (12) 4’-8” x 13’-6” tables configured for soft top (plastic) with imbedded uni-strut jig rails. (plastic and underlayment removed). Eight table ejectors need repairs. Includes rail, power masts, all available aisle plates and jigging. 480 volt, 3 phase electrical. Price: $17,990 :: FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

FitzGroup.com

Adverti$er

October 1st, 2015 #08195 Page #17

TRUSS EQUIPMENT

1986 Mid-Atlantic (Tee-Lok) Tracked Gantry Mid-Atlantic 75 foot working length roof gantry featuring one (1) 18” diameter roller gantry (needs new pendant controls), twelve (12) 4’-8” x 13’-6” tables configured for soft top (plastic) with imbedded uni-strut jig rails. (plastic and underlayment removed). Eight table ejectors need repairs. Includes rail, power masts, all available aisle plates and jigging. 480 volt, 3 phase electrical. $17,990 :: FOB NY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1992 Clark Industries 14' Tri-Axis Press with Kick-Leg Table Model 4000 Gantry Press (14’) with Joystick Control, Ride Platform & Floor Track. 20 HP Hydraulic Pump Motor. 16” x 19” Pressing Platen. Kicklegs & End Stands for 12’ x 50’ Table. Combination Steel/Wood & Plastic Top with Jig Bars $28,000 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com

RFitzgerald@FitzGroup.com

54' CMF Gantry Roller with Tables CMF gantry system consisting of (1) 24” CMF tracked gantry, (9) 5' 11" wood tables with plastic tops and ejectors, (1) 5' 11" wood tables with plastic tops and no ejectors, (23) 14' conveyor rollers, (3) 12' conveyor rollers, approx. 80 feet of rail and (15) truss receivers. Includes any available system jigging hardware, and all available spare parts if any. Price: $38,990 :: FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Helps cut lumber even faster tHan it Helps cut costs. Compatible with any linear-feed saw, the WoodRunner™ automated lumber retrieval system increases production by 30%, while reducing labor by half. WoodRunner sets the pace of the operator, and ensures accurate lumber selection every time. Visit www.apexmw.com or call 507-322-3700 to learn more today.

PHONE: 800-289-5627

006_WTS_wood_runner ad_7.123x3_v3.indd 1

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982 12/15/14 5:38 PM

www.todd-drummond.com

todd@todd-drummond.com

(603) 763-8857

Testimonials of Consultation Services at http://todd-drummond.com/todds-profile/

To: Whom it May Concern From: Dan West Re: Todd Drummond Consulting I have been intimately involved in every facet of the truss business. This gives me a unique ability to understand how different areas of the business should intertwine to get things done. I have been involved in creating and running top performing businesses for decades. My aphorism: No matter how good you are, there is someone else doing it better! You need to constantly be on the lookout for the better option and adapt to make it your own. One of my goals has been to learn more about “lean manufacturing” and how I could adapt it to my operation. Of course, like all business owners, I have never had the time to do this. Enter Todd Drummond, I have known Todd for years and have watched as he slowly grew his consulting business into a major player in our industry. Todd has a luxury that very few people have. He has not only been in dozens of truss plants, he has had the opportunity to watch, listen and learn in every one of them. This is invaluable in itself and something a business owner would never have the time to do. The other side of the coin is, Todd has extensively studied Lean Manufacturing and been very progressive about understanding how best to implement lean principles in a component operation. I hired Todd’s services in 2013. His process was all encompassing and included almost every aspect of the business. He did a great job covering every aspect of the process, while using lean principles as the foundation. I was pleased with everything. Todd went over best practices and lean principles related to our location. He gave us some great advice and input. One of the most powerful things was the power point presentation Todd left with us. This is invaluable when trying to work with and train your people. When we are ready to upgrade a part of our business, we refer to the TDC presentation to help keep us on track and make sure we are always thinking lean! Todd has watched and done time studies on almost every piece of equipment in our industry. To have that as a resource is worth the price of admission, in and of itself. When it comes to investing in new equipment, Todd’s suggestions have been very astute. His recommendations and suggestions have definitely made a positive impact on our company and our bottom line. Whether you’re a successful business looking for more, a struggling business that needs some guidance, or a business somewhere in between, I highly recommend Todd Drummond Consulting LLC to help you along the way. Sincerely,

Dan West - Owner & Managing Member - Snake River Truss & Components LLC

80+ Companies Completed 25+ Years in the Truss Industry 10+ Years in the Consultation Business Normal gains for most clients are 3 to 6 points in net profit!  Lean Principles Explained and Demonstrated  Tailored for the Component Industry and for Each Company  Proven and Practical Best Methods for Reducing Cost and Improving Net Profits  Includes Theory of Constraints, Opportunity Cost, and Better Pricing Methods  Approx. 18 Hours of Training Spread Over 4 days  All Departments Addressed - Manufacturing, Design, Sales, & Administration

(50% manufacturing - 50% is all other departments)

 Truss Manufacturing Time Standards

(R.E., S.U. & Man-Minutes)

 ~95 Different Time Elements to Choose for Differing Conditions for Both Roof and Floor Manufacturing  Proper Costing & Pricing. Scheduling, Production Efficiencies

 Effective Incentive Programs  Equipment  Before You Buy, Get Unbiased Advice - I do not receive any commission or get any type of referral fee from any of the

equipment or plate vendors. Warning: Equipment and plate salespeople are spreading discouraging remarks about my services. They are all worried about losing a potential sale, which has happened on more than one occasion. The best advocates are my previous consultations. See the many testimonials of my services on my profile page.  Linear Saw Time Study Spreadsheet – Eleven different types of linear saws and one generic automated component saw

for expected productivity

 Design Department  Management and Employee Issues

All have given positive testimonials and recommendation of services…

Testimonials of Consultation Services at http://todd-drummond.com/todds-profile/

M ACdverti$er omponent

October 1 , 2015 WE DI DN’T #08195 Don’t Forget! You Saw it in the Adverti$er Page J UST WEATH E R #20 TH E STOR M. st

anufacturing

W e helped

PART TH E CLOU DS. Matching you with the right wood component equipment. New or used. Through thick or thin. www.WoodTrussSystems.com www.mitek-usa.com

765-751-9990

WE DI DN’T J UST WEATH E R TH E STOR M.

W e helped

PART TH E CLOU DS. Matching you with the right wood component equipment. New or used. Through thick or thin.

www.WoodTrussSystems.com www.WoodTrussSystems.com 765-751-9990

005_WTS_WOOD _TRUSS_AD_2.25X4.75_v2.indd

1 12/15/14

7:42

Table Guided Gantry System by Square 1 Manufacturing

New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase. Price: $(Based on required configuration) :: FOB IN.

Call for pricing (Based on configuration) 765-751-9990 www.woodtrusssystems.com

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

SQ-1 Series Roof Truss Line Donâ&#x20AC;&#x2122;t Forget!

The:

You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #21

CONTACT SQ-1 AT: 866-647-7771

Visit us at www.SQ-1Design.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUSS EQUIPMENT

Idaco Trussembler Hydraulic Clamp System Idaco hydraulic clamp system includes (12) hydraulic clamping heads, 50 ft. of bottom chord track, 14 ft. of peak track with all available air supply piping and fittings, (5) bottom chord heads, pop-up ejector arms for the bottom chord, (2) additional heads that require repair, (1) peak table, (4) free standing top chord heads ,hydraulic pump unit with a spare pump motor, controller stand, (2) spare cylinders for the hydraulic heads, and (2) spare recoil springs for lifting the heads. 240 volt, 3 phase electrical. Price: $8,990 NOW $6,300:: FOB BC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Mitek 14' x 100' Side Eject Roller Gantry System Mitek 14’ x 24” Diameter Roller Gantry (Track Mounted). 100’ of Walk-Thru Steel Top Tables with Pop-up Skatewheel Conveyor. Unistrut Jigging & Jig Hardware. Powered Exiting Conveyor with Receivers. Mitek 14’ x 24” Diameter Finish Roller. Outside Conveyor with Peak-Up Truss Stacker. $69,000 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

e ic io r t P uc ed R n

Alpine RAM Easy Rider Tables 10 Each - Steel Tables with Slotted Tops & Liftouts. $3,000 per Table or $27,500 for all 10 Tables. FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

October 1st, 2015 #08195 Page #22

Don’t Forget! You Saw it in the

Adverti$er

WALL PANEL EQUIPMENT

2004 MiTek/PCS Wall Panel Line System includes Power Framer nailon-the-fly framing table builds 8’ to 12’ wall heights up to 24’ in length, workers remain stationary as the wall continuously and automatically moves through nailing station. Framer transitions to power squaring conveyor with E-Series Multi-tool Turret Bridge for application of exterior sheathing. System transitions to 20’ stacking queue conveyor with Smart Crane which auto stacks up to 16’ wall lengths according to pre-determined bundle layout. 460v/60/3, 120v/60/1, air at 100 psi required. $48,990 :: FOB WI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

WALL PANEL EQUIPMENT

Panels Plus Wall Panel Framer Wall panel assembly equipment for wood or steel wall panels, floor-panels, and related framing components. The base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches. Design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality. Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages. Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge. Squaring stations, sub-component tables, conveyors and panel lifts are also available. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical. From $40,200 base price FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Does Your Truss Plant Have Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts!

Sell It! in the Advertiser Call 800-289-5627

2005 Viking ADT Wall Panel Framer Price: $30,890 :: FOB MI Condition: Good Category: Wall Panel Description: Component Manufacturing Viking framing station with PreStage table. dverti$er M I Framing station model PS-1000, includes S S B C , E W P stud locators (16" & 24" centers), skate wheel ejectors, walk-through aisles, 1/2 HP motor and two powered tool carriages. From the OEM's literature: "Discharge speed of 12" per second. Once staged the framing sequence is event driven: tools fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4'-2" to 12'-0" high, in lengths up to 20' long." Sold new for Thomas McAnally - Publisher tmcanally@componentadvertiser.com $132,000. System support and installation 800-289-5627 x1 www.componentadvertiser.com available from the OEM. 480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Tools not included. 1 Page - 12x Rate Advertisers get a Wood Truss Systems 765-751-9990 Second Page FREE! www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982

erving the tructural uilding omponents

Our Advertising Rates will

ngineered

ood roducts and

illwork ndustry

Blow You Away!

CALL NOW!

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #24

WALL PANEL EQUIPMENT

Wright Panel Lift and Hoist Assembly (Bridge Crane Assembly) Wright lift and hoist assembly . Includes (2) 1.5 HP trolley motors, (4) 500 lb. capacity hoists, capacity (1) ton. Was used for transferring wall panels to 12 feet in height. Distance between the hoists is 13'-6" x 8'-0", the travel distance is 50 feet and the vertical travel distance is 15 feet. See video for demonstration. 220 volt, 3 phase electrical. Price: $9,990 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Viking Framing Station Viking 38’ framing station with walk through design includes H.D. stud locators (16” & 24” centers), skate wheel ejectors, Powered tool carriages with three (3) tools per side, Auto-Plate Stops, and dual operator controls. Once staged the framing sequence is event driven, including 2x4 or 2x6 material size System allows assemblers to work from both the top and bottom chord for increased productivity. Builds walls from 4' to 12’-0” high. System support, and installation available from the OEM. 480 volt, 20 Amp, 3 phase electrical. 15 CFM air at 100 PSI. Price: $43,990 :: FOB OH Wood Truss Systems 765-751-9990

NEWS FLASH! NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

Carlson 9' x 16' Wall Panel Line •Framing Table with Stud Locators, Skatewheel Conveyor & Pneumatic Plate Clamping •Squaring Table with Router Bridge •Sheathing Table with 16 Tool Panel Bridge •Excludes Bostitch Nail Guns on Panel Bridge •Triad CN-4 Sub-Component Nailer $14,900 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

We stole a Sneak Peek at the NEW Single Tool Sheathing Station VIDEO: http://goo.gl/rzOQ10 Don’t tell Panels Plus!

2007 Hain 12' x 20' Framing Table Wall Lengths up to 20’. Powered Height Adjustment (8’ to 12’ wall heights). Single Gun Tool Dollies. Includes 2 Bostitch F21PL Nail Guns (21 Degree, Plastic Collated). Pop-up Skatewheel Conveyor. Ball Screw Telescoping System (Repeatable to .015”). Retractable Plate Clamps. Movable Single Rail Sill Support. Movable Double Rail Header Support. 110 Volt / 1 Phase. Lightly Used (Dirty and Minor Surface Rust from Long Term Storage) $19,500 FOB NE OPTIONS Add $1,250 for Used IBS Handle Bar Router Add $3,500 for IBS Component Tables with Pop-up Skatewheel Conveyor Add $360 for 1 Pair of 10’ Skatwheel Conveyor Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

Be a part of the

thing !

BCMC

BCMC 2015 | October 20-23 | Wisconsin Center | Milwaukee, WI | bcmcshow.com

Toll Free 800-382-0329

www.wasserman-associates.com

WizardPDS®

drop-in Channels™ Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.

Retro fit now - own it in 6 months!

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er WALL PANEL EQUIPMENT

$59,000 FOB MO

IBS 16’ Tilt Table •Adjustable Heights & Clamping to 12' •Skatewheel Conveyor •Hydraulic Pump & Cylinders •Remote Control Panel •Excludes Wall Panel Lift & Plant Net Computer with Enclosure in Photos $25,000 FOB Alberta Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Monet DeSauw Framing Table with Panel Bridge FRAMING TABLE

Lengths to 16' (additional length available in 4' increments) Powered Height Adjustment (8' to 12' wall heights) Pop-up Skatewheel Conveyor Fixed Squaring Stops Excludes Tool Dollies IBS 12’ x 16’ Exterior Wall Panel Line (Line #2) FRAMING TABLE Programmable Fastener Patterns with PLC Touch Pad Entry Wall Panel Lengths up to 16' Bridge Auto Return Powered Height Adjustment (3'-11" to 12'3" wall heights) Bridge Tilt at Sheathing Seams Light Bar Laser Pointer Auto Stops Tool Dollies (Excludes Nail Guns) OPTIONS Stud Locators at 16" & 24" O.C. Pop-up Skatewheel Conveyor Add $950 for Stud Locators at 16" & 24" O.C. SQUARING TABLE WITH MULTIAdd $1,750 for Handle Bar Router TOOL PANEL BRIDGE Add $1,250 for Wall Panel Lift (Excluding Hoist) Wall Panel Lengths to 16' Add $1,500 for 1 Pair of 15' Skatewheel Conveyor with Stands Powered Height Adjustment (3'-11" to 12'3" wall heights) Add $3,750 for Sub-Component Layup Tables Manual Squaring Stops Beam Panel Bridge (Excludes Nail Includes Installation Support in the United States & Single or Staple Guns) Top & Bottom Plate Stitchers (Excludes Nail Canada or Staple Guns) No Bridge Tilt or Auto Return ACCESSORY EQUIPMENT Four (4) IBS Plant Net Computers with Enclosures (No Stands) IBS Component Table with Auto Stops 60' Conveyor with Stands IBS Handle Bar Router (No Router Motor) Wall Panel Lift. $69,900 FOB AB Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com

October 1st, 2015 #08195 Page #27 WALL PANEL EQUIPMENT

Carlson Sub-Component Nailer Infeed/Outfeed Roller Conveyor. 3 Mounted Senco Nail Guns & 1 Loose Senco Nail Gun. $4,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com TRUCKS & TRAILERS

Load Lifter T-40 Yard Carrier The T-40 Modular Yard Carrier can easily move a modular building off your production line to your staging area in minutes. 50,000 Lb Capacity. 70' Main Rail Length (78'-6" Overall Length). 20" Vertical Lift. 18 HP Gas Engine Power Unit for All Hydraulics. Rear Lift: Six 5 x 20 Cylinders. Pintle Hitch Coupler. Running Gear: Six 20,000 Lb Heavy Duty Agricultural Spindles & Hubs FOB NE:: $19,500. NOW $18,900 Wasserman & Associates 800-382-0329 www.wassermanassociates.com

PANEL BRIDGE

Toll Free 800-382-0329

www.wasserman-associates.com

2015 Precision Equipment Roll-Off Trailers 40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System. Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extenda-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System. Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

TRUCKS & TRAILERS

2000 Prentice Telestik-33 Material Handler 32’-10” Boom. 4,000 Lb Payload. Excludes Truck. $10,000 FOB GA. NOW $8,000 Wasserman & Associates 800-382-0329

1990 Ford F800 Truck with 1982 Barns Truss Trailer

•Low Mileage Unit in Good Condition FANTASTIC DEAL! $9,900 FOB CA Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Component Manufacturing dverti$er

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Don’t Forget! You Saw it in the TRUCKS & TRAILERS

2004 Hot Shot 43' Roll-Off Trailer Hydraulic Raised Roller Bed. GVWR: 24,000 Lbs. Tandem Axle. Tires: 23516. Electric Brakes. Headache Rack. Manufactured by R & R Truck & Trailer (7-26-04). $9,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

1999 Haulin 48' Roll-Off Trailer Leaf Suspension with Tandem Sliding Axle. Hydraulic Lift Neck. Air Pin Locks. DOT is Current (March 2015). Air Brakes with ABS. Brakes are 50%. Tire Size: 25570R22.5. Tires are 6/32” to 14/32”. Hub Meter. Some of the cross members have rust holes. $13,900 FOB MN. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Tell Them You Saw it in the

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Adverti$er

October 1st, 2015 #08195 Page #28

MISC.

2010 USIFAB Roof Truss Vertical/Flat Stacker Price: $63,980 :: FOB QC Condition: Good Category: Material Handling Description: 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2009 EnDiSys / Graco Foam Insulation System EnDiSys Model 3004240B. Skid Mounted Graco Reactor H-25 Hydraulic, Heated, Plural Component Proportioner. Maximum Flow Rate: 22 Lb/Min. Maximum Fluid Working Pressure: 2,000 PSI. Reactor Portable Dispense System (Manual Contol). 230 Volt / 3 Phase. Two 100 Gallon Heated Tanks. Drum Agitators (Both Sides). Feed Pumps. Recirculation System for Hose and Reactor. 150’ Heated Hose with 10’ Whip. Out of Service (Stored Inside). $19,500 Now $17,000 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt). •Pressure Pump & Vessel. •Lightly Used. •Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

www.mitek-usa.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

MISC.

Don’t Forget! You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #29

Todd Drummond Consulting LLC.

Improve Profit With Better Time Management Practices

www.todd-drummond.com Phone: 603-763-8857 todd@todd-drummond.com September 23, 2015 Copyright © 2015 2008 OMGA Finger Jointing Line Price: $29,900 NOW $24,900:: FOB CO Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, OMGA INK F-100 glue station, and TITEN finish planer of unknown age, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

People say “I don’t have enough time” all too often. This seems to be Todd Drummond especially true of the home building industry where there never seems to Todd Drummond Consulting www.todd-drummond.com be enough skilled workers to satisfy the demand. If your group is always talking about needing more people, equipment, and time, then it would certainly benefit by improving time management. Improving time management allows everyone to accomplish more with the existing resources, which certainly will have a positive effect on net profits. Stephen Covey, the guru of effective time management, once created a simple matrix that has stood the test of time. By dividing a common task that is urgent and important into four groups (see matrix), one can begin to understand some common-sense truths about time management. Too often, we are spending too much time in the quadrant of necessity (1) because we neglect the quadrant of quality and improvement (2). Quadrants deception and waste (3 and 4) should be self-explanatory. Neither group is important, and they both are characteristics of self-discipline that define an individual’s work ethics and drive.

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $52,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Hain 20' Powered Measuring System •Adapts to Any Saw •Left or Right Hand Operation •Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers) •Motor: 1/4 HP Linear Actuator (110 Volt) •Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion •Stops: Jig Bored Steel •Stop Blocks: Machine Billet Aluminum •Optional Lengths from 5’ to 60’ •Optional Gang Stop •Add $770.00 per 10’ Section of Heavt Duty Roller Conveyor with Stands Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

The Quadrant of necessity (1) is what too many of us are focused on. The more our time is consumed by crises, pressing problems, firefighting, reworks, and all the “MUST BE DONE NOW” issues, the more things get out of hand. How does one reduce this stress and find more time? The old axiom of “work smarter not harder” is a term that is often stated but seldom implemented. But that old axiom is the key for many of us to become more productive and effective with our time. Essentially, we will have more time by reducing mistakes, producing more with greater skill and speed, and creating system processes that do not need our constant supervision. Take a quick survey within your group about the following issues. Regardless of any formal education, how many have or are actively pursuing greater knowledge for anything related to better management practices, system processes, and skill development? Does your company actually support training and development, or are such issues not addressed? What kind of returns could a company expect with an active training program? Calculating training time versus return: •

Assume 10 hours training per employee;

•

10 employees = 100 hours of training;

•

Assume only 1% gain in productivity;

• ~2,000 Hours/employee/year * 1% gain * 10 employees = 200 hours gained versus the 100 of training

•

Every 1% gain is an extra 200 hours for the same 100 hours spent (2% = 400, 3% = 600…); and

•

Depending on the department and task, most case studies state that there is an average gain of 5% to 25% in productivity directly related to training programs. Improve Profit With Better Time Management Practices continues page #40

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

WE DI DN’T Component Manufacturing Don’t Forget! J UST WEATH E R dverti$er You Saw it in the Adverti$er MISC. MISC. TH E STOR M.

October 1st, 2015 #08195 Page #30

Toll Free 800-382-0329

W e helped

www.wasserman-associates.com

PART TH E CLOU DS.

2001 MiTek Ready-Feed Lumber Conveyor Invicta DGI-40 16" Feeds 4’ to 20’ material on an extended 30’ Single Surface Planer (Used) length, five-chain in-feed at 25’ fpm. HD •15 3/4” x 8 1/2” Capacity 15,000 lb. capacity, 230/460v 3Ph, 3 H.P. •25 & 46 FPM Feed Speeds Motor, with foot pedal forward and reverse •5,000 RPM Cutterhead Speed control. This unit has always been inside •7 1/2 HP Motor and the appearance is especially good. •230 Volt / 3 Phase Price: $8,890 :: FOB KY. •Powered Raise & Lower of Table Wood Truss Systems $4,000 FOB WA 765-751-9990 www.WoodTrussSystems.com Wasserman & Associates www.woodtrusssystems.com 800-382-0329 www.wassermanassociates.com

Matching you with the right wood component equipment. New or used. Through thick or thin. 765-751-9990

2007 Univeyor Automated Linear Conveyor System

_WTS_WOOD _TRUSS_AD_2.25X4.75_v2.indd 1 12/15/14 Just-in-time delivery of cut material packages via automated linear conveyor, delivering banded packages to four-stations over a 103' production area. Features a Signode HB 4300, semiautomatic plastic strapping station with foot control to strap truss packages which are delivered to an operator selected station via Univeyor conveyor system consisting of medium duty chain driven live rollers at a rate of 40' per minute. Weight of cut material package can be up to 800# and up to 20' long. Includes (1) 40' continuous strand chain driven conveyor, (1) 18' continuous strand chain driven conveyor, (1) 22' continuous strand chain driven conveyor, (1) 19' continuous strand chain driven conveyor, (4) right angle transfers, (4) skate wheel tracks, (2) 48" non-powered gates, and all available safety equipment, light towers, controls, e-stops, and motors. System includes top-loading, gravity-fed trays for pre-picked connector plate delivery to lumber package stations . Allen-Bradley controls, 575v, 3 phase power. Includes all shop drawings and layouts, system is installed and under power for inspection by prospective buyer. (System was over $140,000 new in '07).

$88,990 NOW $79,990:: FOB BC 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

2011 Todd Saw Notch & Drill System

• PLC Control to Drill, Notch & Cut up to 5 Boards at once • 2x4 thru 2x10 up to 16’ in length • Automatic Advancing Infeed Table • Notch from 3/4” to 3 1/2” deep with a minimum notch width of 3” at different locations • Drill at different heights and locations 7:42• AM34” Diameter Saw Blade • 16” Diameter x 3” Kerf Notcher Blade • 1 1/2” Maximum Boring Bit • 600 Volt / 3 Phase / 60 Amps • Excludes: Optional Infeed & Outfeed Lift Tables & Lumber Carts $75,500 FOB CO.

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? We’re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com

STRICTLY CONFIDENTIAL!

Read/Subscribe online at www.componentadvertiser.com

MISC.

Sullair ES-8 Screw Air Compressor/Tank/Dryer Sullair 20 HP model ES-8 screw type air compressor with Large 200 PSI tank and Sullair SR-175 air dryer. $8,890 FOB OH. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

MISC.

Adverti$er

October 1st, 2015 #08195 Page #31

Door & Stair

2003 Triad Smart Stair Router System CNC (computer numeric controls), menudriven machine cuts 2x10 & 2x12 standard stair profiles w/touch screen controls. Two HD routers cut top or bottom stringer only, or both stringers simultaneously. Smart Stair Router accommodates standard stair profiles, no riser profiles, split stringers & open stringers with hardwood or softwood settings; cuts top or bottom stringers or both simultaneously. Features (2) HD 2 HP belt driven routers w/1/2" capacity collets, (2) stepper linear actuators for cutting profiles, (1) servo/stepper drive wheel for indexing, 628 lb. vertical clamp, 352 lb. horizontal clamp, industrial computer, and 4-axis motion controller. System includes 2260 Wedge & Glue Block Cutter to mix stacks of 1x and 2x materials in the same hopper. Cuts (2) wedges out of 1x material and (1) wedge out of 2x material w/walkaway hands-free operation. Capable of cutting glue blocks; bag-style dust-vacuum system included. Includes Triad stair assembly clamp for easy jigging of staircase assemblies. Accomodates up to 16 risers with a maximum width of 50". Price: $52,750 $47,750 NOW $32,750 FOB PA Wood Truss Systems 765-751-9990

Norfield Vertical Door Loader 2,800 Lb Capacity. 48" Stack Height. 480 Volt / 3 Phase. Location: TX. $7,900.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

New SL Laser Projection System New, laser projection system from SL Laser. Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights). Includes system computer, cables, mounting hardware for attachment to customer's structure, factory installation, training and choice of green or red laser. Works with each connector plate manufacturer's design software. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.

$22,677 FOB FL | AS NEW

765-751-9990

www.woodtrusssystems.com New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $15,500. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Four Arm Infeed Deck Price: $7,890 :: FOB PA Condition: Fair+ Description: 10' long x 10' wide 4-arm infeed deck, powered by a 1 HP motor, prism chain feed and deflector pans. 230/460 volt, 3 phase. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

BAM CNC Stair Router Saw Reman 03/08. Builders Automation Machinery [BAM] model CNC/MFSR stair router. Contemporary, box & open stairs, the only machine available that also cuts the top and bottom landings. Programmable with a large library already in the machine for most all box and open stringers. Remanufactured includes new wiring, rebuilt spindle motors, new drives & is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. One year warranty. Setup is free of labor charges we do charge airfare and per diem for setup and training. Portable 4 bag, 3 phase vacuum switched on at the machine controls is available for $1,568. Installation the OEM available at an additional omponent anufacturing by charge. 230 volt, 3 phase, 60 amp electrical requirements and 120 p.s.i. and 35 CFM air B C ,E W P M I requirements. Price: $56,667 :: FOB FL Wood Truss Systems 765-751-9990 Read/Subscribe online at www.componentadvertiser.com

Spanco Freestanding Bridge Crane Equipment Details •Capacity: 4,000 Lbs •Runway Length: 33’ •Bridge Length: 20’ •Trolley Clevis Height: 12’ •Overall Height: 15’-6” •Add $2,500 for Harrington NER 1/2 Ton Hoist & IBS Wall Panel Lift •Add $25,000 for IBS Tilt Table $10,000 FOB AB Wasserman & Associates 800-382-0329 www.wasserman-associates.com

M ACdverti$er Serving the Structural

uilding omponents

ngineered

ood roducts and

illwork ndustry

2002 Builders Automation Template Stair Router Model RUWO 2000 MFSR. Cut Box and Open Stringers. Manual Setup with Auto Feed and Cut. One or Two Stringers per Cycle. 10’ Infeed and 10’ Outfeed Roller. Conveyor with Stands. 2 Bag Dust Collector. (2) Lift Tables for Staircase Assembly. 240 Volt / 3 Phase. $25,600 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

RUVO Model 925 Door Machining Center Interior & Exterior Door Machine will automatically: bore for the main lock hole. bore for the latch hole. rout for the rectangular latch plate. bore for the strike hole. rout for the rectangular strike plate. mortise for two or three hinges in both door & hinge jamb. Specifications: Door Height: 6’-6” to 8’-0”. Door Width: 1’-4” to 4’-0”. Door Thickness: 1 3/8” or 1 3/4”. Butt Sizes: 3 1/2”, 4” or 4 1/2”. Jamb Width: 2 1/2” or 10 1/2”. Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Door & Stair

Norfield Magnum Door & Jamb Machine •Door Sizing/Beveling •Lock & Latch Drilling •Hinge Butt Routing in the Door & Jamb •Faceplate Routing up to 1 1/8” x 2 3/4” •Air Predrill & Air Screwdriver •Width: Doors to 4-0, Jambs to 10 1/2” •Height: Doors to 8-0, Jambs to 8-0 •Thickness: Doors to 1 3/4”, Jambs to 1 1/8” •Butt Sizes to 5” x 5” •Butt Spacing: Infinitely Variable •Lock Backsets from 2 3/8” to 5” •230 Volt / 3 Phase $8,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Don’t Forget! You Saw it in the Door & Stair

B.A.M. CNC Stair Router System Builders Automation Machinery model CNC/MFSR, 4-axis SERVO stair router. Produces contemporary, box and open stairs. The only machine available that also cuts the top and bottom landings. Fully programmable via system touchscreen w/large library already stored in the machine for almost all box and open stringers. This is a complete system with stair-clamp, Weg Saw and optional Vacuum dust collector. Two high-frequency, 5 H.P., 24,000 RPM fan-cooled spindles horsepower, Installation and support OEM available at an additional charge. 230v, 70 amp, 3 ph., electrical requirements and 110 p.s.i. @ 15 CFM air requirements. One owner, purchased new and installed by OEM. $40,890 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

new equipment showcase

800-382-0329

Adverti$er Parts house

POST USED PARTS FOR SALE FREE!

All truss industry equipment parts ads are FREE, including machinery that is “For Parts Only” Submit your ads with one photo, not to exceed 750k to: tmcanally@componentadvertiser.com or Call: 800-289-5627 x 1

Used Bimba 314-DXP Air Cylinder (9 Available) $20 Each (Nebraska) Wasserman & Associates 800-382-0329 www.wasserman-associates.com Alpine AutoMill RS Component Saw Parts (5) Encoder Drive Belts (2) Encoder Drive Gears (1) Drive Circuit (3) Hold Down Drive Rod Couplers (4) 3/4" Encoder Couplers (5) Carriage Track Scrubbers (1) Encoder Data Cable (1) P.C. Data Cable (3) 1 1/2" Plastic Slider Bushings (1) 1 1/4" Gear Encoder Coupler (5) Encoders (2) Motor Brake Caliper & Disk Sets Wasserman & Associates 800-382-0329 www.wasserman-associates.com

October 1st, 2015 #08195 Page #32 NEWS LINKS 84 Lumber’s Woes Continue in Louisiana: http://goo.gl/XH0bcB US LBM’s Acquisition Frenzy Continues http://goo.gl/VVmqGk THE Advocate Sheriff’s Office searches for work release inmate who walked off job at lumber company: http://goo.gl/9e9g0z BFS buys ProBuild. US LBM first gets Lyman, then Lampert. ABC Supply expands. And now Consolidated Lumber Co. aka Arrow Building Center has a new owner. http://goo.gl/2LXwPl 10 Most Overvalued Housing Markets in America: http://goo.gl/eOjwYD Q3 2015 Openings, Closures, and Acquisitions: http://goo.gl/kVAz62 84 Lumber to Increase its Manufacturing Operations http://goo.gl/D5zNUC Metal Construction News ClarkDietrich Building Systems to Relocate Warren, Ohio Manufacturing Facility http://goo.gl/22ar6N

MiTek Launches New Hardy Frame® Website http://goo.gl/cf0nXH

Monet DeSauw FWA 500 Floor Web Cutter

•Push Button Powered Blade Angulations •Single Push Button Setting for 2 Blades per Side •Electronic Digital Readouts •Backup Mechanical Indicators •Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks •Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber •12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) •60 Pieces per Minute •(4) Internal 16” Blades & (1) External 16” Cut-Off Blade •Pneumatic Blade Brake on External Blade •Dust Hoods •Vibrating Waste Conveyor (under saw) •Add $3,600 for 12’ Incline Waste Conveyor (adjacent to saw) •Add $1,700 for Extra Set of Blades •Single Sided Setup is available at Additional Cost •480 Volt / 3 Phase

(2) Used Triad Stud Locators mounted to (1) Bracket (30 Available) $45 Each (Nebraska) Wasserman & Associates 800-382-0329 www.wasserman-associates.com Read/Subscribe online at www.componentadvertiser.com

$48,000 FOB MO

www.wasserman-associates.com PHONE: 800-289-5627

2000 Auto-Omni 5 Blade Automated Component Saw (For Parts or Repair) $12,900 (Alabama) Wasserman & Associates 800-382-0329 www.wasserman-associates.com

MiTek® Releases “SAPPHIRE™ Mobile Viewer” for Windows, a Collaboration Tool for Designing, Building, and Inspecting Wood Frame Structures http://goo.gl/INErwi MiTek Launches MiTek Builder Products Division http://goo.gl/yd7UBW

Tell Them You Saw it in the

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #33

LAYMAN'S LUMBER GUIDE

Softwood Framing Lumber Market Forecasts & Trading Strategies Since 1985

Overcome Lumber Market Volatility, One Week At a Time The most sure >ire way to make a Likewise, in falling markets, LOT of money in the lumber business is by purchasing prior to weekly price decreases leaves frequently taking small bites out of multiple price money on the table. Why do that? swings...one week at a time...without taking To overcome this volatility, week by expensive risks. week, >irst and foremost, stay on top of inventory. To do that, one only needs to Review it daily and anticipate what needs to be anticipate and act. Anticipate which way prices purchased over the coming three weeks. (Bought, will move "next" week, and buy either before the not delivered. Factor in delivery by truck or rail.) next price increases or after the next price Then, act on the Layman's Lumber Guide buying decreases. strategies. Fact: Mill prices change either up or Twice weekly I evaluate current down an average of $9 per thousand, 37 weeks market conditions, direction and momentum, each year. [15 weeks remain unchanged.] along with seasonal and historical in>luences. The In effect, your inventory changes long term (12 months) and short term (6 weeks) $333/mbft annually (2x4 basis). That is 100% forecasts are updated Sundays and Wednesdays volatility. $250,000 of inventory >luctuates in value and buying strategies are determined prior to bi-‐ $250,000 per year. $1 million of inventory weekly price changes. >luctuates $1 million. Somebody gets that money. You either give it away to your customers and The complete Lumber Market suppliers, or you keep it. Wouldn't you prefer to INTELLIGENCE is published Wednesday evening, keep it? Lumber Market BRIEFING is published Sunday evening, and Lumber Market BLUEPRINT, a This radical price volatility effects 30-‐60-‐90 day forecast the last day of each month. your business in two ways...the value of existing inventory and value of future, not-‐yet-‐purchased A month-‐to-‐month subscription can inventory. be worth $$$ thousands to you every month. In rising markets, failing to increase Subscription request form at the link below. sales prices to re>lect replacement costs, "gifts" price appreciation, your pro>its, to your customers. www.laymansguide.org/Subscriptions www.laymansguide.org/subscriptions Not good! Failing to make purchases prior to midweek and week-‐ending price increases just Thanks for your consideration. forks money over to your suppliers. Also, not good. Ironically, falling markets occur Matt Layman, Layman's Lumber Guide during periods of increased jobsite demand. (See green zone on graph next page.) Therefore, Layman's Lumber Guide Forecasts lowering sales prices with weekly price declines is www.laymansguide.org not necessary. Sales can be based upon average inventory costs, rather than replacement, when prices are falling during peak demand. MARKET INTELLIGENCE is a product of Laman’s Lumber Guide Forecasting Suite... LUMBER Matt Layman, Publisher 145 N. Main St., Cramerton, NC. 28032 Lumber Market Intelligence...Matt Layman, Publisher 145 N. St., Cramerton, NC 28032 Phone|Text: 336-516-6684 | FAX: 888-811-6917 | Main email: matt@laymansguide.org Phone or www.laymansguide.org Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org | Reprint or distribution is unlawful without permission. | twitter.com/Laymansguide Join Matt Layman on LinkedIn www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #34

Don’t Forget!

Adverti$er

You Saw it in the

Celebrating 30 Years of Softwood Framing Lumber Market Analyses and Forecasts

LAYMAN'S LUMBER GUIDE

North American Softwood Lumber Market Evaluation

Matt Layman, Publisher

Week #39

Wednesday September 23, 2015

Another Dimension

Thought Provoking and Inspirational

The Bluff Has Been Called, Momentum on the Wane

For the last several decades we have abused the phrase "multi-tasking". Equally as long, perhaps even longer, multi-talenting has been around. Multi-talenting, likely a term you have never heard because I just made it up, can be evidenced primarily on a drive through the country. This is where living off of the land or living off of people who live off the land is how folks generate income. Farms are common, country churches frequent the landscape, the random country store can be found every few miles, a farm supply is a must, and an old fashioned genuine full service, service station is a staple. Also equally as necessary to these nonmetro communities are multi-talented entrepreneurs. These enterprises start out with something like a small engine repair that generates a trickle of year round business. During hunting season, the talent of taxidermy provides a little extra holiday money. Having to make things last, there is always a neighbor in need of upholstery. And every March and April tax season can be quite lucrative. So on the next drive through the country note how very common it is to see a sign in the front yard that reads, "Small Engine Repair, Taxidermy, Upholstery, Tax Returns." That is America. ...ML

Two weeks ago our lumber market began to feel the effects of production curtailments. Strength in pricing and increased order flow to the mills was almost instantaneous. That first round of revived energy was only the warm up. It was a sampling of what a bull market would look and feel like if/when over all lumber production were to be reduced by some 20%. An over reaction by the futures markets with a one-week $25 rally, spooked buyers and lifted cash prices before mills could secure the coveted solid two-week order file. With no additional production curtailments being added since that first flurry, the futures market has given back its gains over the last ten days. Mills' sales have stalled, buyers have resumed inventory liquidation and prices are once again negotiable. In last Sunday's Lumber Market BRIEFING the strategy was to "call the bluff". Give this market some space and time to encourage more production curtailments. The FDP projected low is at week #42 with upside momentum anticipated to accelerate beginning week #43. That is the target for the beginning of the next bull market. Transition to bull market buying and selling strategies will be our focus over the next couple of weeks. Looking Forward...ML!

"Multi-Talenting," The Real Entrepreneurial America

FORECASTED DECISION POINTS (FDP'S), 10-YEAR AVERAGE, LUMBER COMPOSITE

SPOT PRICE Composite 2x4's #2 SYP-E, SPF-W, Dry Hem Fir, Green Doug Fir. (Blue). FDP's (Vertical Red Lines), reversals or accelerations, since 01/99: 398 FDP's…340 turns within 1 week. 85% FDP Historical Accuracy. Green Shade=Highest Demand Weeks #10-25; Yellow Shade=Daylight Savings Weeks #10 Through Week #45; Red Shade = Lowest Demand Weeks #45-09

Lbr Composite FDP Forecast 420 395 370 345 320 295 270 245 220

Lbr Composite 10-‐Year Ave 2013-‐'16

Lbr Composite 2013-‐'15

`` `

39 43 47 51 3 7 11 15 19 23 27 31 35 39 43 47 51 3 7 11 15 19 23 27 31 35 39 43 47 51 3 7 11 15 19 23 27 31 35 39

LUMBER MARKET HOTWASH is a product Layman's Guide Forecasting Suite... LAYMAN’S LUMBER MARKET HOTWASH is a of product of Lumber Laman’s Lumber Guide Forecasting Suite... Matt Layman, Publisher Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org Matt Layman, Publisher 145 N. Main St., Cramerton, NC. 28032 www.laymansguide.org Join Matt Layman on LinkedIn Phone|Text: 336-516-6684TWITTER.com/Laymansguide | FAX: 888-811-6917 | email: matt@laymansguide.org www.laymansguide.org | twitter.com/Laymansguide | Join Matt Layman on LinkedIn PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #35

Don’t Forget! You Saw it in the

Adverti$er

LAYMAN'S LUMBER GUIDE

North American Softwood Lumber Price Summary

Matt Layman, Publisher

Week #39

SPOT CHECK

2x4#2 Last Week This Week Change

SYP-E 310 325 15

SYP-W 295 305 10

SPF-W 245 245 0

Wednesday September 23, 2015 Page 2 SPF-E 350 350 0

HF 305 305 0

(SYP) SOUTHERN YELLOW PINE SYP-East KD 19% 2x4#2 2x6#2 2x8#2 2x10#2 2x12#2 KD 19% 2x4#1 2x6#1 2x8#1 2x10#1 2x12#1 SYP-Central KD 19% 2x4#2 2x6#2 2x8#2 2x10#2 2x12#2 KD 19% 2x4#1 2x6#1 2x8#1 2x10#1 2x12#1 SYP-West KD 19% 2x4#2 2x6#2 2x8#2 2x10#2 2x12#2 KD 19% 2x4#1 2x6#1 2x8#1 2x10#1 2x12#1

R/L 325 290 240 285 405 R/L 370 370 315 325 455

SC, NC 14' 325 280 230 290 315 14' 345 350 310 325 355

& So.VA 16' 18' 345 310 295 285 240 230 285 265 435 405 16' 18' 360 470 370 375 300 315 320 330 485 430

20' 335 290 265 295 590 20' 450 450 415 440 730

R/L 305 295 230 255 400 R/L 360 345 280 315 445

Mill prices in AL, MS 8' 10' 12' 305 285 290 275 305 310 210 220 220 230 250 260 385 355 410 8' 10' 12' 335 320 335 300 325 330 280 290 290 280 305 295 420 370 455

14' 300 295 225 265 365 14' 345 320 260 295 390

16' 320 300 235 265 400 16' 360 335 280 315 450

20' 335 305 250 255 535 20' 415 385 300 390 590

8' 280 280 225 220 375 8' 330 305 265 255 390

10' 270 300 230 240 325 10' 295 325 275 265 360

SPOT CHECK

7/16 OSB Last Week This Week Change

SW 190 195 5

NC 220 220 0

WC 170 170 0

(SPF-W) WESTERN CANADIAN SPRUCE-PINE-FIR

Mill prices in No.FL, GA, 8' 10' 12' 290 315 315 255 300 290 230 245 240 235 295 295 390 335 405 8' 10' 12' 340 330 345 360 360 360 310 325 325 285 320 325 440 360 430

R/L 305 300 235 240 380 R/L 335 325 280 275 405

GDF 300 300 0

12' 305 310 250 240 380 12' 305 325 275 265 390

14' 300 315 230 235 350 14' 315 315 270 260 375

16' 355 300 230 240 375 16' 355 315 260 285 415

18' 290 290 245 235 390 18' 415 335 290 300 425

18' 275 300 245 230 365 18' 325 315 290 260 390

20' 305 305 250 255 505 20' 370 350 330 295 550

FOB British Columbia KD 19% R/L 2x4#2 245 2x6#2 245 2x8#2 280 2x10#2 315 2x12#2 365

8' 220 210 265 290 235

10' 215 250 295 325 280

12' 225 245 300 315 390

14' 255 230 255 320 325

16' 270 260 280 295 385

18' 265 270 305 375 460

20' 260 270 315 355 445

(SPF-E) EASTERN CANADIAN SPRUCE-PINE-FIR Delivered Boston (8'-16' R/L tallies) KD 19% R/L 8' 10' 12' 2x4#2 350 340 315 325 2x6#2 350 355 360 345 2x8#2 360 375 375 375 2x10#2 445 425 440 445

14' 350 310 330 455

16' 385 375 370 445

12' 285 270 290 340 350

14' 300 290 295 340 345

16' 350 345 330 365 390

18' 305 310 300 340 365

20' 305 310 300 340 375

12' 285 285 265 370 360

14' 290 295 265 380 335

16' 355 355 330 440 415

18' 310 325 295 410 385

20' 335 335 375 410 430

(HF) WESTERN COASTAL HEM FIR FOB Mill Western U.S. KD 19% R/L 8' 2x4#2 305 255 2x6#2 305 255 2x8#2 305 280 2x10#2 340 290 2x12#2 355 290

10' 280 290 305 295 310

(GDF) GREEN DOUGLAS FIR FOB Portland, OR Green R/L 2x4#2 300 2x6#2 305 2x8#2 285 2x10#2 395 2x12#2 370

8' 245 245 255 285 295

10' 275 285 260 325 325

(GDF) GREEN DOUGLAS FIR LONG LENGTHS FOB Portland, OR Green 2x6#2 2x8#2 2x10#2 2x12#2

22' 505 440 465 470

24' 505 440 445 470

26' 520 445 485 470

28 530 480 480 480

LAYMAN’S LUMBER MARKET HOTWASH is a product of Laman’s Lumber Guide Forecasting Suite... Matt Layman, Publisher 145 N. Main St., Cramerton, NC. 28032 LAYMAN'S LUMBER MARKET HOTWASH is a888-811-6917 product of Layman's Lumber Guide Forecasting Suite... Phone|Text: 336-516-6684 | FAX: | email: matt@laymansguide.org Matt Layman, Publisher 145 N. Main St., Cramerton, NC 28032 www.laymansguide.org | twitter.com/Laymansguide | Join Matt Layman on LinkedIn Phone or Text: 336-516-6684 Email: matt@laymansguide.org PHONE: 800-289-5627 Read/Subscribe online at Join www.componentadvertiser.com FAX: 800-524-4982 www.laymansguide.org Matt Layman on LinkedIn

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #36

Don’t Forget! You Saw it in the

Adverti$er

LAYMAN'S LUMBER GUIDE

North American Softwood Lumber Price Summary

Matt Layman, Publisher

Week #39

STRUCTURAL COMPONENT GRADES

SYP MSR 2x4 2400f 2x4 2100f 2x6 2400f 2x6 2100f 2x8 2400f 2x8 1950f 2x10 2250f 2x10 1950f 2x12 2250f 2x12 1950f SYP Visual 2x4 SelStr 2x4 #1Dns 2x4 #2Dns 2x6 SelStr 2x6 #1Dns 2x8 SelStr 2x10 SelStr

R/L 415 402 417 401 377 353 372 341 509 486 R/L 426 410 357 405 390 360 398

8' 370 365 335 340 300 300 320 290 455 450 8' 375 355 350 350 330 325 470

MSR R/L SYP vs SPF 2x4 2400F 2x4 2100F 2x4 1650F 2x4 #1 SYP 2x6 2400F 2x6 2100F 2x6 1650F

Chicago SYP SPF 445 455 432 435 410 380 447 445 431 435 405

10' 370 365 385 365 400 370 345 310 410 410 10' 380 370 320 400 385 365 350

12' 385 375 390 380 380 350 345 315 515 495 12' 395 385 335 400 385 365 355

Niagara SYP SPF 460 465 447 445 420 410 462 455 446 445 415

All SPF prices reflect Western Canada origins and include 3-4 18 & 20's combined on each car. MSR SPF KD19% R/L Western Mill BC Atl 2x4-2100f 380 455 2x6-2100f 380 455 MSR SPF KD19% R/L Eastern Mill Niagara Atl 2x4 2100f 415 435 2x6 2100f 455 475

14' 415 395 420 380 370 345 345 320 475 455 14' 410 390 335 390 375 350 355

16' 425 415 435 435 360 335 395 360 550 510 16' 430 410 350 410 395 340 515

Minne SYP SPF 450 445 437 425 400 400 452 435 436 425 395

Chi 435 435 Chi 405 450

Wednesday September 23, 2015 Page 3

18' 500 470 465 435 420 405 400 365 520 485 18' 550 530 460 415 400 355 360

20' 500 470 510 485 420 400 490 465 685 650 20' 530 510 440 490 475 455 280

Detroit SYP SPF 455 450 442 430 405 405 457 440 441 430 400

STUDS 2x4x8

SYP SPF-W SPF-E HF Stud Stud Stud #2 260 215 305 250

FL Stud 280

GDF #2 310

R/L 401 455 441 R/L 314 405 419

14' 375 425 400 14' 300 400 425

16' 425 455 440 16' 325 400 400

TIMBERS

SYP East 4x4 #2 4x6 6x6 West 4x4 #2 4x6 6x6

8' 415 465 450 8' 330 400 420

10' 400 440 460 10' 315 380 410

12' 375 475 460 12' 300 425 450

SYP 5/4x6" RADIUS EDGED DECKING

East Std Prem West Std Prem

R/L 382

1001

R/L 459 1009

8' 385 900 8' 455 925

10' 385 900 10' 475 925

12' 385 900 12' 450 900

14' 365 755 14' 400 880

16' 385 1200 16' 485 1160

East

West

(OSB) ORIENTED STRAND BOARD South South

FOB MILL 7/16" 23/32" T&G

East

West

SE 190 325

SW 195 325

North

Mid

Central Atlantic Canada Canada

NC 220 325

MA 210 335

EC 190 285

WC 170 290

LAYMAN’S LUMBER MARKET HOTWASH is a product of Laman’s Lumber Guide Forecasting Suite... Matt Layman, Publisher 145 N. Main St., Cramerton, NC. 28032 Phone|Text: 336-516-6684 | FAX: 888-811-6917 | email: matt@laymansguide.org www.laymansguide.org | twitter.com/Laymansguide | Join Matt Layman on LinkedIn PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #37

LAYMAN'S LUMBER MARKET INTELLIGENCE

Softwood Framing Lumber Market Forecasts & Trading Strategies Week #39 Wednesday September 23, 2015 Page 4 MARKET SNAPSHOT #2 2x4 SYP-Mill #2 2x4 SPF-W Mill #2 2x4 KD HF Mill #2 2x4 Grn DF Prtlnd Lbr Composite 7/16 OSB SE

Wk 39 325 245 305 300 294 190

Wk 38 310 245 305 300 290 185

Wk 37 310 240 305 300 289 180

Last Current vs Year Last Year 435 (110) 335 (90) 360 (55) 320 (20) 363 (69) 165 25

6x10 LUMBER HISTORICALS (+/-)Current vs 10-yr Ave Current 10-yr-6-wk ave 10-yr/6-wk hi 10-yr/6-wk lo

SYP SPF-W HF 5 (17) 36 325 245 305 320 262 269 485 380 385 224 175 180

GDF 58 300 242 385 155

OSB (1) 190 191 450 125

Next 6 weeks / last 10 years 300 combined weeks SYP, SPF, HF, GDF, & OSB

Week # % UP Weeks % DOWN Weeks % UNCHANGED Weeks Total Up Weeks Total Down Weeks Total Unchanged Weeks Ave 6-wk Price Change

39 28% 40% 31% 85 121 94 (6)

38 26 45 29 79 135 86 (9)

37 25 48 28 74 143 83 (12)

36 27 51 21 82 154 64 (15)

MILL ORDER FILES: Sales/Production Ratios % LUMBER 3wk wk Ave 38 97 98 Sales=Production

wk wk 37 36 118 75 at 100%

OSB 3wk wk wk wk Ave 38 37 36 100 90 120 90 Sales=Production at 100%

HOUSING TRENDS (realtor.org) N.A.R. Seasonally Adjusted EXISTING HOME SALES Months Supply Median Price Existing (census.gov) U.S. Census Seasonally Adjusted NEW HOME SALES Months Supply Median Price New U.S. Census Seasonally Adjusted HOUSING STARTS Single Family Multi-Family U.S. Census Seasonally Adjusted HOUSING PERMITS Single Family Multi-Family Q2'14 Rental Vacancies 7.5% Home Ownership 64.7% (NAHB.org) June Housing Market Index 60 Single Family Present 65 SF Next 6-months 69 Shopper Traffic 44

PHONE: 800-289-5627

Jun 5.48 4.7 236.4

Jly 5.59 4.9 234.0

Aug 5.31 5.2 228.7

Jun 481 5.3 281.8 Jun 1211 687 524 Jun 1337 692 645 Q3'14 7.4% 64.4% Jul 60 65 70 43

Jly 507 5.2 285.9 Jly 1161 762 399 Jly 1130 680 450 Q4'14 7.0% 64.0% Aug 61 66 70 45

Aug

Aug'14 5.07 5.2 220.9

Aud'14 403 6.1 280.4 Aug Aug'14 1126 966 739 643 387 323 Aug Aug'14 1170 1040 699 643 471 397 Q1'15 Q2'15 7.1% 6.8% 63.7% 63.4% Sep Sep'14 62 59 67 63 68 67 47 47

¥Weather: Now this is some nice weather, isn't it? Partially over cast, 75 degrees with a light breeze...perfect for setting trusses, banging nails, and building decks. This is catch up and get ahead time. ¥Price Summary: (2x4#2 SPF-W basis.) This market is typical of lumber buyer mentality. When mill prices are $300, everyone is a strong buyer at $250. At $250 they are less willing because the market is weak. At $200 the number becomes too good to refuse. ¥6x10 Historical Evaluation: Current prices are more in line with 10-year historical values, yet still deeply discounted to last year's values. The next six weeks still lean towards the bearish side, though that the down trend has lost significant momentum over the last four weeks. ¥Curtailments: Follow through curtailments have stalled, weakening buyer resolve. Weaker prices will reignite mill willingness to cut back. ¥Sales / Production Ratio: Well there you go. Last week's 2-week wood is now ready. 3-week offerings have evaporated. Mill order files are thinning again. ¥Housing: Existing home sales softened in August as we expected while shoppers wrapped up vacations and prepared for back-to-school. Housing starts also slipped as expected with summer's heat reducing productivity. Permits improved as a leading indicator that weather would improve and summer back logs would catch up. Look for October housing stats to improve as a function of weather. ¥Forecast: As the next FDP reversal low draws closer, we see that week's #41/42 put in the bottom with upside acceleration beginning the third week of October, week #43. ¥Strategy: Begin scale-in buying over the next 2 weeks with late week purchases until we see additional production curtailments.

Layman's Lumber Guide...Matt Layman, Publisher Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org Reprint or distribution is unlawful without permission. www.laymansguide.org

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #38

Donâ&#x20AC;&#x2122;t Forget! You Saw it in the

Adverti$er

LUMBER FUTURES

Technical Analysis & Trading Strategy Week #39

Wednesday

Page 5

September 23, 2015

New Contract Lows We have seen $70 in volatility over the past three weeks...up $30 and down $40 (-$25 over the past week)...not a game for sissies. Since January my long term objective for this bear market once it broke below $300 was $210. That projection was based upon the previous lows seen on the chart and a parallel trend line off of the lower highs across the top. Now that we are in the "zone" there is another trend line, blue, that projects a slightly higher support at $215-ish. Today we traded $216.50. The parallel trend line now projects a move down to $200. The November contract has an 87%, five-year correlation (2008:85% 2007:87% 1985:88% 1982:86% 1981:86%) that suggests waiting out $210...with a shot at $200...or lower.

J,H1/-KL(M:).?BN2

O+"!-/-P:;)-480-I;@-?,)):<;":I-Q:;=,D;<.1394586102 480-R;@-?,)):<;"+,D

?,)):<-X 70Y 8667$7/Y 8669$79Y 137/$77Y 1378$7UY 1371$7UY

-4U6--406--

Today's prices are current as of 5:30 PM Central Cash 2x4

245

52-Wk Low 52-Wk High

Nov

Jan

Mar

May

216.5

220.5

230.5

240.0

362.9

346.4

323.0

317.9

LBR Futures Last Wed. Close

241.5

245.8

241.5

256.2

LBR Futures This Wed. Close

217.3

221.5

230.5

240.8

(4.2)

(9.0)

(10.3)

LBR Spread

-486--466--876--8U6--

Basis= Cash-Futures

-806--

Carry=$.030/mbft/day

-886--

Cash value to futures

Futures Last Year

330

337

340

Data taken from trade and statistical services deemed reliable. Basis does not include 1% payment discount terms for futures. Trade summaries do not include fees and commissions.

/-P:;) ?,)):<

-866--

-166 --76

1/-P:;) W;"":)D

--U6 --06

/-P:;) W;"":)D

--86

46-P:;) W;"":)D 4 -861/6384

!""#$%%&&&'()*+'*,(%---./012-3445/406%.7662-389598/3---:5(;+<$-=;<:=>()*+'*,(

---6 -

?,#@)+A!" ď&#x203A;&#x2122;-13735861/-B,,):-C:=:;)*!-?:D":)E-FD*'-G<<-C+A!"=-C:=:)H:I

Futures Graphs are courtesy of Moore Research Center, Eugene, OR. , MRCI.com The contents of this publication are not, nor should be construed as, a solicitation to trade futures. There is a risk of losing your investment when trading commodities. Futures prices are rounded to the nearest dollar. Cash is contract grade #2 2x4 W-SPF. Current spot contract is November 2015. The last trading day, or expiration, is the last trading day before the 16th of the contract month. Forecasts and observations are based upon technical and fundamental criterion at the time of publication and are not offers to buy or sell futures or the cash equivalent. Recommendations and forecasts are the sole opinions of Matt Layman, publisher of Layman's Lumber Guide. Constantly changing market conditions must be considered prior to trading commodities. Reproduction and redistribution of this document is strictly prohibited without permission of the publisher. Layman's Lumber Guide Forecasting Suite Subscriptions Lumber Market Intelligence, Bi-weekly 12-month forecast, month-to-month: $87/month. Lumber Market Briefings, Bi-weekly abbreviated 12-month forecast: $57/month. Lumber Market Blueprint Monthly 30-60-90 day forecast: $27/month. Matt Layman, Publisher, 145 N. Main St., Cramerton, NC 28032...Phone:336-516-6684 Fax:888-811-6917 Email: matt@laymansguide.org www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

M ACdverti$er omponent OMPONENT

anufacturing ANUFACTURING

Safety First!

Don’t Forget! You Saw it IN in THE the YOU S AW IT

Safety Meeting Topics

st October17 1th , 2012 2015 February #08195 #05131 Page #39 P AGE #33

Adverti$er Protección Personal Contra la Violencia en el Sitio de Trabajo

From State Fund CA.

Se estima que cada año 1.7 millones de trabajadores resultan lesionados en su sitio de trabajo por asaltos y que ocurren aproximadamente 800 homicidios. Los incidentes de violencia en el sitio de trabajo incluyen confrontaciones verbales, asaltos simples o agresiones con daños físicos graves, robo, violación y homicidio. Todos podemos ser víctima de la Each year in the workplace, an estimated 1.7 million workers are violencia en el trabajo, por lo que es importante estar conscientes de los injured in assaults and approximately 800 homicides occur. Workplace factores de riesgo. violence incidents include verbal assault, simple or aggravated assault, Los factores que aumentan el riesgo de violencia en el sitio de robbery, rape and homicide. Anyone can become the victim of a trabajo incluyen el contacto con el público, el intercambio de dinero, y workplace assault, so it is important to know the risk factors. la vigilancia, resguardo o entrega de artículos de valor. Otros factores incluyen sitios de trabajo móviles (autos o camiones), trabajo en Factors that increase the risk of áreas de alto crimen y trabajo tarde por la noche o temprano por workplace violence include contact with la mañana. Por último, los trabajadores que entran en contacto the public; the exchange of money; and con personas inestables y volubles en el cuidado de la salud, guarding or delivering valuable property. servicios sociales y justicia penal pueden correr riesgos. Other factors include mobile workplaces

Personal Protection Against Workplace Violence

(cars or trucks); working in high-crime areas, and working late night or early morning hours. Finally, workers that have contact with unstable and volatile persons in health care, social services, and criminal justice settings can be at risk.

Si usted corre el riesgo de ser víctima de la violencia en el sitio de trabajo, conozca y observe los resguardos de seguridad que existen en su sitio de trabajo. Respete los requerimientos de acceso limitado al público. Asegúrese de que los visitantes sean revisados al entrar al sitio de trabajo y actúe usted como escolta por todo el edificio. La separación física, como por medio de paredes o divisiones de vidrio y mostradores anchos If you are at risk for workplace pueden proporcionar mayor distancia entre usted y el público; violence, know and follow the safety úselos. Medidas de seguridad tales como cámaras de video, guards in place at your worksite. Respect espejos falsos o unidireccionales y alarmas de pánico personales o en el requirements for restricted access to the public. Ensure that visitors escritorio pueden ayudarle a comunicarse si tiene problemas. are screened when entering the workplace and escort them throughout the building. Physical separations like glass walls, partitions, and deep Conozca y cumpla las políticas para abrir y cerrar su sitio de counters can provide distance between you and the public, so use them. trabajo, y para manejar y transportar dinero en efectivo o artículos de Security measures like video cameras, two-way mirrors, and personal valor. Establezca, como regla de trabajo, tener a otro empleado como or desk panic alarms can help you communicate if you are in distress. refuerzo, o suficientes empleados si usted tiene que tratar con una persona Know and follow the policies for opening and closing your place potencialmente hostil. Mantenga todas las armas ofensivas potenciales, of business and handling and transporting cash and valuables. Make it tales como instrumentos filosos o artículos pesados guardados bajo llave a rule to work with a backup employee or enough staff coverage if you y fuera de la vista del público. will be dealing with a potentially hostile person. Keep possible offensive Entrénese sobre cómo reconocer y reportar los indicios de un weapons like sharp or heavy instruments locked away and out of the compañero de trabajo, cliente o integrante del público con trastornos public eye. emocionales. Usted también debe recibir entrenamiento sobre cómo tratar Get training on recognizing and reporting the signs of a disturbed a clientes hostiles y calmar situaciones violentas. Reporte de inmediato coworker, customer, or member of the public. You should also seek cualquier incidente de violencia o amenaza contra la gerencia; a menudo training on handling hostile customers and diffusing violent situations. las amenazas de violencia pueden intensificarse y convertirse en actos Immediately report violent incidents and threats to management; often, de violencia. violent threats can escalate to become violent acts.

When faced with a hostile person, respect their personal space and be aware of your body language, movements, and tone of voice. Stay calm and diffuse the situation. Try to keep a barrier like a desk between yourself and the person, but don’t block yourself into a corner. If there is no barrier available, stand at an angle and 4 to 6 feet from the person; this keeps you at arms length and gives you a means to escape. Have plans should a dangerous situation arise; note exits, phones, and potential defensive weapons. Use physical force as a defense only.

Cuando encare a una persona hostil, respete su espacio personal y esté consciente de su propio lenguaje corporal, movimientos y tono de voz. Permanezca tranquilo y calme la situación. Trate de mantener una barrera física, tal como un escritorio, entre usted y la persona, pero no quede acorralado en una esquina. Si no hay una barrera disponible, párese en ángulo y a unos 4 a 6 pies de la persona; esto le mantiene alejado a más del largo de un brazo y le brinda una vía de escape. Planifique cómo actuar si surge una situación peligrosa; observe las salidas, teléfonos y armas defensivas potenciales. Use la fuerza física sólo como defensa.

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. PHONE: 800-289-5627 online at FAX: 800-524-4982 PHONE: 800-289-5627 RRead/Subscribe EAD/SUBSCRIBE ONLINE AT www.componentadvertiser.com WWW.COMPONENTADVERTISER.COM FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

Don’t Forget! You Saw it in the

Adverti$er

October 1st, 2015 #08195 Page #40

Improve Profit With Better Time Management Practices from page #29

A perfect example is training and the implementation of lean manufacturing practices. Implementation of lean manufacturing gives everyone more time! Common results across numerous case studies for effective lean manufacturing implementation are as follows: √

Increased overall productivity;

√

Quality improvement while having lower re-works;

√

Shorter lead time for scheduling;

√

Lower overall cost while improving net margins; and

√ Higher net profits for companies implementing an ongoing lean manufacturing practice compared to those who do not, according to every case study published on this topic. If your company wants to improve net profit by improving time management, then more time should be spent doing more of the task in quadrant of quality and improvement (2). Taking the time that always seems to be in too short of supply takes a concerted effort and active support by the entire management team. Failure is almost certain if it is delegated to a department head without an active participation of the entire management team. It has to be more than just talked about; everyone must be playing a role. Once this is done, more time will avail itself, and net profits will improve. A final word of caution about embracing and trying to implement lean manufacturing: Like any new idea, there is a normal surge of enthusiasm in the initial stage. However, once the hard task of actual implementation starts, it can easily falter. There are numerous reasons for this, but primarily knowing the lean terminology and actually applying it are two very different things. I have been refining my understanding, training, and implementation of lean manufacturing for the past 12+ years as a full-time lean consultant. Lean manufacturing is not one thing, such as the 5 “S” rules, but many things. It is like a big tool box with many different tools for different situations. I cannot state this enough: save your company a great deal of time and money by getting professional help with the training and effective implementation of lean manufacturing from someone like me who understands the home building industry. It is well worth it. ~ Todd...

PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

The

JobLine

.com

Careers in the Truss, Wall Panel

and Engineereed Wood Components Industry

JobLine Hiring Zone Job Opportunities Available Candidates

JobLine.com, inc.

800-289-JOBS

The

JobLine.com, inc.

The

800-289-JOBS

www.thejobline.com

job opportunities available Truss Designer Central Texas. ID: J12723 https://goo.gl/Bm3Ox3 Truss Designer Texas ID: J12726 https://goo.gl/TlFaMJ Outside Sales MD/Northern VA ID: J12725 https://goo.gl/c8h8KW Location Manager in Training - Truss GA ID: J12716 https://goo.gl/KJlphu

Job Hunting?

Truss Designer with Panel and EWP/I-Joist experience Northeast ID: J12724 https://goo.gl/ylHNE2

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

Truss Designer with Panel and EWP/I-Joist experience Northeast ID: J12712 https://goo.gl/2SA7oc

We’re here when you need help! visit: www.thejobline.com

STRICTLY CONFIDENTIAL!

Candidates seeking jobs: theJobLine.com, Inc.

The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries. A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. To be considered, every candidate must create and maintain a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time. You can also specify your job, location, and compensation goals. Our Recruiters are personally committed to helping you find opportunities that fit your goals.

To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab. Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627

October 1st, 2015 #08195 Page #42

Outside Sales - Truss Atlanta J12722 https://goo.gl/VDRUR5 Production Manager - Truss/Panel Upper Midwest ID: J12719 https://goo.gl/gMPCaY Truss Designer - MiTek/Multifamily Texas ID: J12721 https://goo.gl/iAOQZV Truss Design Manager - Multifamily Texas ID: J12720 https://goo.gl/Zkwtu0 Multifamily Truss Designer ***Promotion Opportunity*** South ID: J12718 https://goo.gl/vmmeBe Truss Designer GA ID: J12717 https://goo.gl/MQZWR0 Truss Designer Northeast ID: J11700 https://goo.gl/aQE3HP Senior Multifamily Truss Designer Southeast ID: J12714 https://goo.gl/wCA4uh Light Gauge Steel Wall Panel Designer Colorado ID: J10666 https://goo.gl/ChhC6B Truss Designer Mid-Atlantic ID: J10655 https://goo.gl/1onRrz Multifamily Truss Designer East ID: J10662 https://goo.gl/CSH668 Inside Sales / Truss Designer Midwest ID: J10500

https://goo.gl/KcYQ0c Truss Designer / Senior Truss Designer Southwest ID: J11689 https://goo.gl/QiEv10 Senior Designer - Truss North Carolina ID: J10651 https://goo.gl/uXQf3f Regional VP - Truss Division Western US ID: J12709 https://goo.gl/eGsE0q Truss Designer - Single Family Tract AZ ID: J12702 https://goo.gl/PXH85a General Manager - Truss Midwest ID: J12707 https://goo.gl/HtdofH Senior Truss Designer / Design Manager Midwest ID: J10649 https://goo.gl/jLygFB Truss Designer - Multifamily/Single family Colorado ID: J11694 https://goo.gl/sLEhDe Truss Designer & Panel Designer - Remote Remote ID: J12705 https://goo.gl/8dFouq Truss Designer & Panel Designer Midwest ID: J12704 https://goo.gl/syTje3 Truss Designer - Single Family Florida ID: J10658 https://goo.gl/Xe303x Remote Truss Designer - Truss/I-Joist/EWP MD ID: J10683 https://goo.gl/rTVg8Z Truss Designer Northeast ID: J11700 https://goo.gl/0Dpe5r Designer - Wall Panel Iowa ID: J10591 https://goo.gl/8U9kSE Designer - Wall Panel Nebraska ID: J10592 https://goo.gl/lBCYwF Remote Designer - Wall Panel Work from Home Office ID: J10594 https://goo.gl/HKC81c Truss Designer - MiTek Midwest ID: J12701 https://goo.gl/LnogdT Multifamily Wall Panel Designer Arizona ID: J10616 https://goo.gl/x9OD7l Finishing/Shipping Supervisor - Beams Midwest ID: J11698 https://goo.gl/AurM7U

Read/Subscribe online at www.componentadvertiser.com

Truss & Wall Panel Outside Sales I-35 corridor, OK and KS. ID: J11692 https://goo.gl/xU7QVU

Single and Multifamily Truss Designer Minnesota ID: J11697 https://goo.gl/GmVttJ Wall Panel Designer Northeast ID: J11696 https://goo.gl/M6xmdP Production Manager - Truss Midwest ID: J11695 https://goo.gl/SSWLXt Available Candidates General Manager/Division Manager Truss/Panel/EWP/Lumber An energetic, out-of-the-box, problemsolving, executive with a science-based holistic approach to manufacturing, building products and other business operations; I am recognized for my vision, business acumen, integrity, work ethic and capability to cultivate durable professional relationships. Practitioner of “Lean and JIT” manufacturing principles, setting metrics, improving key performance indicators, reducing costs, expanding production capacity and sales – all improving the bottom line. Skilled in business analysis, strategic planning, market and sales development; ability to drive multi-million dollar growth, institute “Best Practices” for small to medium emerging and expanding companies, managing budgets to $ 30M with full P&L accountability and oversight. 20+ Years of truss/panel/EWP manufacturing and business management experience. In 2006 at the height of residential construction distributed $ 24.0 in Lumber, Architectural Millwork and Windows and $ 8.5 M in manufactured wood components. In this position optimized design and production process, which increased output and reduced labor and material costs. Hired trained and mentored middle management; negotiated union labor contracts. Implemented “Lean and JIT” fabrication procedures; consolidated raw material inventory, implemented batch fabrication process and continuous production flow. Enhanced scheduling system to accurately track production and achieve on-time delivery, established QC metrics, quality assurance and OSHA-approved safety programs. After 2006, helped company downsize and then worked as a consultant for turn around opportunities. Computer literate, Alpine and MiTek experience, Microsoft Office. Relocation: CO, CT, DE, IL, MD, MA, MN, NJ, NY, PA, WI, NC, OH, IN, KY, LA, ME, MI, MO, OR, SC, VA, DC, NH, VT ID: C11638 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com FAX: 800-524-4982

JobLine.com, inc.

800-289-JOBS

The

EWP Designer | Estimator | Inside Sales Experienced with AutoCAD, iLevel, TJ Beam, and TJ xPert software to produce framing layouts for TrusJoist engineered wood products. Responsible for working with builders and retailers to create the most cost effective solution for their project. Creating quotes from layouts. Calculate gravity loads and sizing wood products to support the load. Understanding the IRC building code for wood-framed structures. Explaining structural framing details to builders and salespeople. Training other designers in load development and design software. Relocation: VA ID: C14506

www.thejobline.com

Available Candidates Truss Designer | Wall Panel Designer Wall Panel Designer | Remote Wall North Carolina Panel Designer 5 years truss design experience - focused Experienced candidate in the design and on floor and roof trusses and connectors. production of a variety of commercial wall I designed trusses and engineered wood panel jobs; small single and multi-unit retail beams for many residential, commercial, structures, medical care facilities, assisted multifamily, hotels, and developments. Once living structures and multi-unit multi-level the design was completed I would provide a apartment and hotel buildings. Coordinate detailed estimate/quote to the customer, and panel designs with truss and EWP designers assist in the final price negotiations. Once as well as loose material estimators for accepted a detailed cutting and stacking list supplying complete framing packages. was provided for the builders in the shop. Prior whole house design using AutoCAD. I provided technical support as needed to Current in MiTek's Sapphire. Some truss builders. Jobsite visits were required from design experience but focus is wall panels. time to time for updates problem solving etc. I spent some time training a couple of new people over those years. MiTek, AutoCAD, Relocation: MD I-Joist software experience, not on Sapphire. ID: C14505

Remote Truss Designer

As Design Manager: Managed a design staff of eight people ensuring that workload was distributed and projects were completed in a timely manner. Worked with production manager and dispatcher to insure that work was prioritized accordingly. Trained new employees and coached existing technician in the use of MiTek design software and encourage them to use problem solving skills to come up with value engineered design solutions. Tracked incident information relating to design and fabrication issues so that management could focus on areas where process improvements or additional training are needed.

Design Roof and Floor trusses from blueprints. Engineer and send to production finished designs along with placement schematic and hanger info. Additionally, I had to engineer LVL beams for floor truss schematics. Has been out of design since the crash, but scored "Average" with only a Jobber. Considering average equals 15 years of experience, he should be able to get back up to speed quickly. Prior MiTek, some Alpine and Truswal, CAD, I-Joist, Beam, and Microsoft Office software experience.

As Designer: Designed roof and floor trusses on both tract homes and high end custom work. Interacted with both salespeople and customers on a daily basis to provide accurate layouts and truss designs. Relocation: OR ID: C14497 Designer/Production/Estimating/Inside Sales - Truss/Loose Lumber 6 years truss industry experience. 3 in design using MiTek and 3 in production, starting as a builder, stacker, sawyer, forklift operator, then into supervision and production manager. Started learning design, estimating and inside sales 3 years ago. All at the same company. Is working toward an engineering degree. Software includes MiTek 20/20 & eFrame, Optiframe, and CadWorks. Products include Floor and Roof Trusses, and loose lumber. Thom's Notes: We tested this candidate and his results confirm a solid 3.5 years skill level but he only had a Construction Master, no software. Not easy with only 3 years experience. I think this candidate is a hidden find! Relocation: AZ, CA, CO, NV, OR, WA, AB ID: C10879 PHONE: 800-289-5627

Relocation: IN, KY, NC, OH, TN, USA South, VA, WV ID: C13446 Truss Design/Estimating Truss Estimator/Designer. - Intermediate. Candidate has 10 years industry experience and 10 years experience in this position. Products include floor trusses and roof trusses. Markets include single family, single family custom, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, and takeoff. Secondary duties include checking others work, repairs, customer service, inside sales, field measurements, software maintenance, training, and filling in for the Design Manager as needed. Software experience includes MiTek and I am willing to learn new software. Education: High School Graduate and Associates degree in Arch Tech. Compensation desired $50,000: Salary. Motivating factors: advancement, compensation, benefits, and job security. Relocation: AB, USA - ALL States, AZ, BC, Canada - Eastern, CO ID: C10132

Prior experience: Design wall panels (some roof and floor trusses) for residential developers, multifamily, hotels, and assisted living buildings. I had regular contact with the builders, engineers, and architects. Once the design was completed I would provide a detailed estimate/quote to the customer, and assist in the final price negotiations. Once accepted a detailed cutting, stacking diagrams and other paperwork was sent to the manufacturing shop. Thom's Notes: Although the candidate has been out of the truss design job since 2007, he has remained in an architectural design, teaching and designing, and his test results show. Scored above average, faster than average, and only used a calculator and CAD. He is one of the best retread candidates I have seen this year. Txt: C14465 to 406-210-1226 or call 800-289-5627 x1 Truss Designer | Truss Design Manager | Estimator | Estimating Manager Relocation: IL, IN, MI, OH Manage the design/engineering & estimating departments. Supervising 3-8 designers in roof and floor truss design/ engineering and I joist design. Coordinate truss repair drawings and timber truss designs. Personally manage large builder accounts. MiTek Sapphire, prior Alpine, Keymark, TeeLok. This candidate will work remotely and has some relocation areas acceptable. Txt: C14456 to 406-210-1226 or call 800-289-5627 x1

Tell Them You Saw it in the

M ACdverti$er omponent

anufacturing

Serving the Structural Building Components, Engineered Wood Products and Millwork Industry

Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com Read/Subscribe online at www.componentadvertiser.com

October 1st, 2015 #08195 Page #43 Design/Operations Manager Truss/Panel - Wood/Steel As Operations Manager: Responsible for all aspects of a major component manufacturing facility, including: profit/loss accountability, budgeting, inventory control and compliance with company policies in all facets of the facility's operations. Recorded a 4% profit, based upon sales, within three months of assuming the leadership position. Responsible for a staff in excess of fifty persons including: engineering, sales, office, delivery and production personnel. As Design Manager: Directly supervised and managed the engineering department staff of eight. Department was responsible for creating engineering and layout drawings for all orders. Scheduled and reviewed all work to ensure it was completed within company guidelines. Led the conversion to MiTek 20/20 design software and MiTek MBA for order entry and quoting. Responsible for the setup and implementation of updated Quality Control program and established design and training standards for engineering staff and lead production personnel. Worked closely with manufacturing to facilitate the assembly and erection processes through the layout and design of components. Relocation: MI, USA - Eastern, USA South, MD, VA ID: C11927 Senior Truss Designer + Panel/EWP/I-Joist/Framing Package Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, hardware, and complete framing packages. Markets include tract, single family, single family custom, multi-family, and light commercial. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, inside sales, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, TJ Expert, AutoCAD, and I am willing to learn new software. Relocation: CA, TN, WA Txt: C10199 to 406-210-1226 or call 800-289-5627 x1 Plant/Location/General Manager-Truss Relocation: AZ Over 20 years experience including P&L responsibility for a truss manufacturing facility producing $18M, multiple shifts, 150+ employees. Very stable with a career track from Production. Computer literate, Microsoft Office. Txt: C11270 to 406-210-1226 or call 800-289-5627 x1 FAX: 800-524-4982

JobLine.com, inc.

The

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? Weâ&#x20AC;&#x2122;re here when you need help! visit: www.thejobline.com

email: mail@thejobline.com or call Thomas McAnally for Personalized Service

STRICTLY CONFIDENTIAL! Truss/Wall Panel/Management Plan direct & control daily operations of wall panel & floor panel division. I Provided a complete plant layout and directed the installation and start-up of a 2004 PanelPlus wall panel line. Evaluate productions, plan and manage budgets and direct QC inspections. Provided wall panel designer training & developed design, production & quality control guidelines. Oversee the analysis of data and information and report to upper management. Provided Site supervision & training for home builders and framing contractors. Lead the planning, pricing, scheduling, administration, implementation & installation of all products, floor panels, wall panels, roof trusses & building materials. A typical 2 story house w/basement (1600 +/- sq./ft.) would be erected in 2-5 days ready for shingles. 20 years experience including Outside Sales, coordinating Estimating, Sales, Design, Production, Delivery and Administrative functions of the truss plant with builders, engineers, architects, home owners, project managers, contractors and store managers. Established work schedules, created designs, layouts and Cad drawings as needed. Supervised up to 3 designers, including training new designers. Coordinated schedules, manufacturing, delivery, billing and job sign off. Resolved problems including collections as needed. Proficient with MiTek, OptiFrame, and Microsoft Office software. Relocation: AK, BC, ID, MT, OR, CO ID: C11220 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627

800-289-JOBS www.thejobline.com

Hiring Zone - Available Candidates Production Manager/Designer/EstimaPlant/Location Manager tor - Truss/EWP/Beams/I-Joist Floor & Roof Truss/Wall Panel Relocation: Virginia Relocation: USA - ALL States Overview: Overview: As Designer: Problem solving with Started in production, working as a builder, incomplete or questionable plans. sawyer, and forklift operator for 16 years. Verification of roof and floor systems As a working shop supervisor he trained including beam adequacy as specified by 10-20 production workers over 2 years. As architects or engineers. Liaison between production manager, he trained, evaluated company suppliers and customers to local and suppervised 25 to 35 production area codes compliance inspectors and plans employees. Responsible for reporting of examiners. Development, manipulation, and lumber inventories and purchasing of plates modification od estimating subroutines in and hangers. Maintained production levels computer software to ensure profitability to meet customer's needs. Increased roof of work. Maintenance of all default and and floor production and lowered labor rates variable software was kept up to date from through hand-on training and leadership a codes standpoint. Hardware order and for 7 years. For the last 5 years he has been inventory control. Taking and verifying responsible for production operations of field dimensions. Verification of contract entire plant. Accountable to owner for the necessities and criteria for commercial productivity and profitabilityof the plant. applications in private, state, and federal In charge of all day-to-day operations areas. This includes contract negotiations, of production, inventory management, addenda, plans changes, and documents worker supervision and OSHA regulatory for proper design, manufacture, and compliances. Hired, trained, evaluated delivery of products. Company quality and managed a work force of 40 people, control representative to TPI (Truss- including 2 supervisors At one time had 3 Plate Institute). Including inspections, for shifts. Led company to 28.4 million BFT of verification of product to national standards. production at 94.1 BFT per man hour. Estimate, Design, optimize, layout and when necessary consult with production Compensation: $70-80K and shipping on orders for wood roof Txt: C11504 to 406-210-1226 trusses, floor systems, and accompanying or call 800-289-5627 x1 beams and hardware. Software: BC Framer, Truss Plant/Location/General Manager FASTBeam, I-Joist, MiTek, Simpson, TJ Truss and Components Plant Manager with Beam, Microsoft Office. over 15 years of experience in the truss Txt: C12286 to 406-210-1226 industry who is looking to apply knowledge or call 800-289-5627 x1 gained while continuing to develop and Production/Design/Location Manager - grow within the management sector. Truss/EWP/Package As Plant Manager: Create programs to Design and manage all truss operations. motivate employees to achieve peak purchase all lumber and plates. Arrange productivity. Hire, train, discipline and payment and shipping. Troubleshoot every terminate employees. Order lumber and all aspect including machinery. Implemented production materiel. Coordinate weekly our OSHA safety plan and requirements. production, sales and safety meetings. Print invoices and remove material from Research cost on purchasing new equipment. active inventory using peach tree software. Attended monthly city council meetings to Set up new customer accounts and validate ensure codes were followed. Oversee credit references. Design wood and steel development of truss fabrication facility. joists and headers. Assist customer project Ensure compliance with Cal OSHA and problems for the best economical and Dot. Oversee shipping and optimize freight costs. Responsible for training leads and practical solution. supervisors on company policyâ&#x20AC;&#x2122;s. Program Prior: Truss design and supervise. Purchase and operate computerized equipment. building material. Arrange billing and shipping from start to finish. From the Proficient with Microsoft Programs, Excel, small detached garage to the large apartment Word, Outlook, ERP software Team growth and development through complex, I have done them all... Relocation: CA effective feedback and ongoing mentorship Excellent communication skills ID: C12276 Experience working with: Metal, Polymer Attention Employers Blends, Components, Finished Product We have over 1,000 Assembly, Clean Room, etc. registered Industry Professionals. Tenacious, Professional, Detail-Oriented, All Job Searches are not public! Strong Sense of Urgency We can search behind the scenes Lean Manufacturing Certified, Kaizen to find the right candidate for your opportunity. Trained, Fork lift Certified Relocation: Arizona, Arkansas, California, See what I can do for you! Colorado, Florida, Hawaii, New Mexico, Thomas McAnally Texas, USA - ALL States 800-289-5627 x1 Txt: C10500 to 406-210-1226 twm@thejobline.com or call 800-289-5627 x1 Read/Subscribe online at www.componentadvertiser.com

October 1st, 2015 #08195 Page #44 Designer/Remote Designer - Truss Relocation: Georgia Design and engineer roof and floor truss systems for residential, commercial and multifamily applications using Alpine AutoCAD design software. Communicate with builders, architects, and engineers to obtain initial truss design and follow up to ensure proper delivery and instillation and repairs if needed. Responsible for design, engineering, repairs, installation guides, job quotes and pricing takeoffs for some of the company's largest customers. Inspection of truss installation, placement and loading conditions at specific job sites in order to ensure customer satisfaction. Txt: C12154 to 406-210-1226 or call 800-289-5627 x1 Outside Sales/Technical - Truss Relocation: Arizona, California, Colorado, Idaho, Minnesota, Montana, Nevada, New Mexico, Oregon, South Dakota, USA Western, Utah, Wyoming, Iowa, Oklahoma, Texas. 35 years construction experience, 25 in truss sales. Sells Trusses wholesale. Sells Trusses to Builders and Owner Builders and service the account through Design, Pricing, Production, Delivery, Installation, and problem solving. Also service National accounts which involves solving all the in-field problems. Dealing directly with the project Supervisor on missing trusses, damaged, missing plates, trusses don't plane, don't work, design errors, bad deliveries, dealing also with the building inspectors, and project engineers. Compensation: Mid $30's base plus commission. Txt: C10234 to 406-210-1226 or call 800-289-5627 x1 Design Manager/Senior Designer - LGS Relocation: New Jersey, New York Overview: As GM: Restructured, organized and currently managing the truss department for the company. Estimating and overseeing all truss estimates valued between $20,000 - $2,000,000. Designing and supervising truss designs for all running projects. Managing projects including supply only and installations. Inventory control including ordering and maintaining approx. $200,000 stock material. Coordinating with Engineers and Architects on design/builds, loading and calculations. Sales coordination through proposal follow-up's, customer design meetings and jobsite tours. As Estimator/Senor Designer: Estimating and design of truss projects. Project management. Coordination of third party engineering, subcontractor installations and material ordering. Always learning and looking for more efficient and economical business practices. Helped restructure the department to become accountable and more profitable. Txt: C12165 to 406-210-1226 or call 800-289-5627 x1

FAX: 800-524-4982

M ACdverti$er omponent

anufacturing

October 1st, 2015 #08195 Page #45

Don’t Forget! You Saw it in the

Adverti$er

Business & Professional Services Listings

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400

CDean@ComponentRunner.com Used Equipment Wanted! Floor Truss Machines Floor Truss Web Saw

Before You Buy Equipment! Save tens of thousands of dollars by first getting a complete assessment of all your current and future needs with a lean manufacturing consultation.  Unbiased, pro versus con assessment

of all manufacturing equipment

 No referral fees or commissions from

the plate or equipment vendors

 Onsite consulting services for the

765-751-9990

ALS or Miser Linear Saws Cyber AT, Servo Omni or AutoMill Trackless Roller Gantry Systems Lumber (Chord) Splicers Triad “Diamond Quad” Framing Tables Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment 48’-70’ Stretch Roll-Off Trailers Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Planx or Wizard Jigging Systems SL Laser or Virtek Laser Projection Systems Field Repair Press Stationary Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

wood truss and wall panel industry

NORMAL NET PROFIT GAINS ARE 3 TO 6 POINTS!

Toll Free: 800-382-0329 www.wasserman-associates.com

 75+ Clients - See Web Site for Testimonials  10+ Years Consultant Services All Areas Covered - 50% Shop / 50% Office

 25+ Years in Truss Industry

Todd Drummond Consulting, LLC www.toddwww.todd-drummond.com todd@toddtodd@todd-drummond.com Phone 603603-763763-8857

We welcome Angela’s Creative Design Studio to the Advertiser Family. If you ever wondered who does the fantastic artwork for Panels Plus, search no more. Let Angela create stunning media for your company. Visit her website at www.angelascreativestudio.com PHONE: 800-289-5627

Read/Subscribe online at www.componentadvertiser.com

FAX: 800-524-4982

www.mii.com/MiTekAssurance

Page 46

Component Manufacturing Advertiser