A #
147
PUBLISHED WEEKLY June 22nd 2012
Component Manufacturing dverti$er
#05147
Serving the Structural Building Components, Engineered Wood Products and Manufactured Structures Industry
Inside: Stocking Shelves and Pulling Weeds ... page #3
BCMC 2012 page 3
Madisons Canadian Lumber Reporter: page 12
JobLine Hiring Zone: page 22-26
New Equipment Spotlight: page 23-26
Safety First Topics in English/Spanish: page 27
Business Directory: page 28-29 Reader Response Form page 30
www.mii.com/MiTekAssurance
8 Page 2
M ACdverti$er omponent
anufacturing
Adverti$er Stocking Shelves and Pulling Weeds Don’t Forget! You Saw it in the
Published Weekly
June 22nd, 2012 #05147 Page #3
Reprinted with permission from the author Written by George M. Fishtorn II 2012 FBMA Chairman and General Manager of Kimal Lumber & Hardware
Editor/Publisher Thomas McAnally tmcanally@componentadvertiser.com
Advertising
Thirty two years ago I was stocking shelves, cleaning bathrooms, and pulling weeds at my family’s lumber yard in Indiana, as of today, I’m still stocking shelves, cleaning bathrooms, and even pulling weeds, and that’s ok.
Todd Doperalski Thomas McAnally
Subscriptions
I’m sure many of you can repeat my words, and that’s just fine because we will do whatever we need to in order to survive and set the example for others to follow. If you’re walking your operation with one of your associates, be the first one to pick up that empty soda can, or that weed sticking up in-between the concrete. If you get to the next empty soda can and the person you’re walking with doesn’t grab it before you do, then maybe that person should be walking home. Here at Kimal Lumber & Hardware, we take great pride in the cleanliness of our operations; a high standard was set many years ago by our President, Mr. Al Bavry. Many times I have heard the vendor reps (who travel around the state) tell me Kimal has the cleanest, most organized yards they have ever seen.
Renae McAnally
Distributed FREE via e-mail subscription or on line at www.componentadvertiser.com
Download FREE and subscribe by e-mail at www.componentadvertiser.com
Getting your yard in order isn’t that hard, but maintaining it can be more difficult if the discipline isn’t instilled in your associates. Yet a clean, well-organized yard speaks volumes to the customer. For example, if you were car shopping and the dealer had unwashed cars and overflowing garbage cans lying around—that may tell you something about that dealer. If you pulled into another dealer’s lot with clean vehicles, maintained grounds, and a spotless showroom that gives off a much better, professional vibe, who would you be more inclined to buy from?
News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources Industry Articles are the property of their creator unless otherwise noted
So whether you’re selling lumber, windows, doors, or cars, keep your yard clean, organized, and welcoming to the customer, and you may have a little bit of advantage over the competition, and every little bit helps.
Disclaimer: We reserve the right to refuse 2012 BUILDING COMPONENT MANUFACTURERS CONFERENCE If you have some ideas you would like to share we would love to hear them, simply e-mail any advertisement or material that we deem CEUs ENG. AdSBC SBC George@kimallumber.com upcoming newsletters. not in the interest of the industry or the FIRE HIRING LEGISLATIVE and we we will post them in STEEL TESTING TPI TRAINING PDHs WOOD ASSOCIATION MAG. vertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011-2012
Register Here: http://bcmcshow.com/
Component Advertiser LOGIN PO Box 16685 Home Menu didn't Click here or Fernandina Beach, FL. load. 32035
see SBC article on #8 for JOIN SBCApage CONTACT US SITE MAP details PRINT QUESTIONS
refresh to view. For Attendees
About New Orleans
no reproduction in whole Show Schedule & Events BCMC Build or in part without permission from BCMCs Past
the component advertiser Join SBCA
BCMC History eMagazine Control Panel/Options ReadingContact options Us HELP You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com
Member PHONE: 800-289-5627
2012 Building Component Manufacturers Conference © Menu | Legal
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
SAWS
Adverti$er
Don’t Forget! You Saw it in the
SAWS
SAWS
Five blade saw that includes PC and cabinet and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut Automated Length Stop & Automated is 14 inches and the shortest angle cut is 18 Saw Rotation as directed by Truss Design inches. The saw cutsfrom 2x4 through 2x12 Software. 10' Infeed & 20' Outfeed Roller lumber up to 20 feet in length. Angles are Conveyor with Stands. 5 HP Motor, set using digital readouts. Both the length 18" Blade. Dust Collector. Computer, and angle adjustments are power driven. Monitor & Keypad. Add $7,000 for New $19,000 FOB AL. Wood Truss Systems Mango Touch Screen Upgrade. $13,900.00 765-751-9990 FOB AB. NOW $11,900 www.woodtrusssystems.com Wasserman & Associates 800-382-0329 www.wasserman-associates.com
g
ASI B500 5 Blade Component Saw
SAWS
Used Apollo Saw with Mango Truss Automation
1999 Mitek Smart Set Pro Semi-Automated 5 Blade Component Saw • • • •
Semi-Automated Saw with Touchscreen Input 5 Blades cut up to 2x12 Material from 18" to 20' in Length 240 Volt / 3 Phase $14,900 FOB CA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
in
anufacturing
d
omponent
2001 Omni Mini-Miser Saw
P en
M ACdverti$er
June 22nd, 2012 #05147 Page #4
-Auto Live Deck -Inkjet Print System D (Two Faces & One Edge) -Installation Available (quote upon request) $10,900 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
June 22nd, 2012 #05147 Page #5
SAWS
e n ic io r t P uc ed R
8
2008 Spida Automated Truss Saw Automated Stop & Automated Saw Rotation as directed by Truss Design Software. Digital LCD Touch Screen Monitor. Clamping Roller Table. Two Bag 3 HP Dust Collector. $26,250 NOW $18,500 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2000 Alpine AutoMill RS Model 344V saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer. The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $16,900 FOB KY. Wood Truss Systems 765-751-9990
SAWS
SAWS
2002 Hain Quick Rafter Cutter
2000 Monet DeSauw B500XE 5 Blade Semi-Automatic Component Saw
1996 Mitek Combi Set 4 Blade Web Saw
Hain Company model QRC, double-bevel cut machine, cuts 2x4 and 2x6, includes (2) 2 HP motors, (2) 7 1/4” blades set at 45 degree angles to one another, steel frame with aluminum housing, manual angulation with air brakes. 90 PSI, 440 volt, 3 phase electrical. $2,900 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
-Touch Pad/PLC Driven with Mechanical Backup -(1) 30" Blade & (4) 16" Blades cut from 10" Square to 20' -Vibrating Waste Conveyor -Belt Incline Conveyor -480 Volt / 3 Phase $22,900 FOB KS NOW $20,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
-Waste & Incline Conveyor -Extra Set of Blades -220/440 Volt - 3 Phase $12,500 FOB MO Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
SAWS
2003 Delta 16" Radial Arm Saw Delta 33-411 16" Radial Arm Saw. Maximum crosscut of 29" and maximum right or left 45 degree miter cut of 22". Features "Turret Arm" construction which allows the sawblade to rotate 360° above the work table, a 5HP motor and 460V, 3ph power. $1,800 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
SAWS
R P ed r u ice ct io n
SAWS
June 22nd, 2012 #05147 Page #6
2004 Monet DeSauw "Desawyer 2000" Five Blade Automated Component Saw Automated, Semi-Automated & Manual Operating Modes. (1) 30" Blade & (4) 16" Blades cut 2x4 thru 2x12 up to 20'. No Incline Waste Conveyor. Add $5,000 for 2000 Monet DeSauw Power Deck. $47,500 NOW $44,500 - FOB IL) Wasserman & Associates 800-382-0329
1987 Alpine Timber Mill 620 Pro Saw
1995 Auto Omni Component Saw
MD MH6C-20 / SN R0347 / 230 volts 3 phase / Saw Foot Print: 40’ overall (30’ Frame & 10’ Incline) x 7’-6” tall x 8’ wide /Bought new and used in small plant / See the operational video link. $8,500 FOB GA. Salter Associates 770-434-1006 www.salter.com
Re Pri du ce ct io n
2002 Alpine AutoMill RS 5 Blade Automated Component Saw including Live Deck Automated via Download or SemiAutomated via Touch Screen Input 19 Axes of Automation. Cut 2x3 thru 2x12 from 13” to 20’. Label Printer. 5 Chain Live Deck. Extra Set of Blades. Waste & Incline Conveyor. Self Dumping Hopper. $40,000 NOW $35,000 FOB WA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2003 Alpine Speed Cut Metra-Cut Centerline Saw with Speed Measure Location: AZ Price: $5,500.00 -20' Speed Measure, Roller Conveyor & Stands -Turntable Air Brake Wasserman & Associates 800-382-0329 www.wasserman-associates.com
1995 Auto Omni component saw, rebuilt in 2004. 5-blade automated saw includes shaker waste conveyor with factory side pans. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20' to 9" @ 90°/90°, spare blades
2005 Koskovich Auto Omni Component Saw Price: $34,900 :: FOB OH Condition: Good 4-blade Koskovich Auto Omni saw, (1) 30" and (3) 19" blades. Includes shaker-pan waste conveyor, factory side pans, factory console with PC, Exair cabinet coolers and set of spare blades. 440 volt, 3 phase electrical. Wood Truss Systems 765-751-9990
PHONE: 800-289-5627
Hain Quick Rafter Cutter Location: AZ Price: $3,500.00 -2x4 and 2x6 to 45 Degrees Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Price-$19,000 FOB Denver CO. Contact: John Wood
303-249-7037
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
SAWS
June 22nd, 2012 #05147 Page #7
Adverti$er
Don’t Forget! You Saw it in the
SAWS
Wood Truss Systems
inc.
765-751-9990 www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
•
2006 Alpine AutoMill SC 5 Blade Automated Saw
Automated(File Download) or SemiAutomated(Touch Screen) Servo Controlled Operation • 23 Axes of Automation • Set Up Times less than 20 Seconds • Auto Sequencing • Auto Management Reporting • Auto Saw Calibration (80 Seconds) without Lumber Cutting & Measuring • Enhanced Diagnostics & Safety Features • 5 Blades(3-18", 1-20" & 1-32") with Air Brakes cut from 13" to 20' $59,900 FOB Alberta Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2004 MiTek Cyber A/T
2002 Koskovich Auto Omni Component Saw Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. O.E.M. conveyor with shaker side pans, rear extensions and a set of spare blades. 230V/120V, 3/1 phase electrical service. Infeed deck shown in pictures can be purchased separately for an additional $5,900. FOB CA $39,900. Wood Truss Systems 765-751-9990
WAS: $64,700 NOW: $57,490 FOB IN Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor with PC in enclosure for fully automated or manual part input, and catcher-side monitor. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode). 24' carriage, belt scrap conveyor included with long incline, spare enclosure, and all available spare parts. (approx. 12'). 220v, 3ph power required.
Omega Round Web Saw
SAWS
SAWS
2006 Monet DeSauw PD-6 Power Deck Lumber Feed System
2007 Lauderdale Hamiltion Up-Cut Saw with Mango Plate Marker
Web saw for cutting "Turb-O-Webs™" features (10) 5 HP saw blades 2@14" 8@12" with air brakes, cuts 2"x3" or 2"X4" webs from 17" to 14' at speeds up to 1,000 webs per hour. Includes scrap conveyor. 460V 3ph. $5,900 :: FOB TN Wood Truss Systems 765-751-9990
2006 TCT EZ Trimmer cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm. Electrical requirements are 440 volt, 3 phase. $5,900 FOB OH. Wood Truss Systems 765-751-9990
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
PHONE: 800-289-5627
2002 Alpine AutoMill RS Model 348A saw fully computer controlled sets up in 2 to 19 seconds - download from a network or in using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. 23 axes of automated movement, enhanced diagnostics, auto management reporting, with label printer. The RS cuts from 13” to 20’ long material in size range from 2x3 through 2x12, and includes 3x18", 1x22" and 1x32" blades with air brakes; installation and tech support available from OEM. 480v/60Hz/3Ph power. $19,900 FOB KY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
-6 Chain Live Deck -16' Wide x 20' Long -Foot Pedal Control $6,750 FOB GA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
Lauderdale Hamilton 24” Super Chop Up-Cut Saw. Mango Plate Marker with Touch Screen Computer. 10’ Infeed & 20’ Outfeed Roller Conveyor with Stands. Dust Collection System. $14,900 FOB LA. NOW $12,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #8
Adverti$er BCMC Line-up Promises Something for Everyone
Don’t Forget! You Saw it in the
Wood Truss Systems 765-751-9990 inc.
MANUFACTURERS’ REPRESENTATIVES
www.woodtrusssystems.com
Combining the qualities and expertise you should expect from an industry supplier
2004 DeSauw Desawyer 2000 Component Saw
NOW $44,000 $55,755 $61,950 FOB: NY Five blade automated component saw that includes shaker pan and waste incline. This saw cuts from 8 to 115 degree angles. The minimum 90/90 cut is 14 inches and the shortest angle cut is 18 inches. The saw cuts 2x4 through 2x12 lumber up to 20 feet in length. OEM reconditioning in 2010.
SAWS
Reprinted from SBC Magazine: BCMC June 18, 2012
BCMC, in the heart of New Orleans this year will be sure to be a great success! The line-up of events is unique this year and with it all being under one roof at the Sheraton on Canal Street, there is literally something for everyone! The BCMC Build project starts it all off on October 16 – where BCMC gives back to a deserving and hard-working local family. Then on Wednesday, October 17 BCMC officially starts with more educational sessions than ever before, the Welcome Reception, and Kick-off Presentation, which you should not to miss. Thursday, October 18 we start the day with the 5K Run/Walk for the BCMC Build and then a line-up of great events throughout the day including Exhibits open all day. Friday, October 19 starts with the Economic Forecast, then Exhibits, and the official adjournment. Go to www.bcmcshow.com to register to attend BCMC and to reserve your hotel rooms!
TRUSS EQUIPMENT
TRUSS EQUIPMENT
1997 Tee-Lok 14' x 120' Side Eject Roller Gantry System
2002 Mitek RoofGlider 14' x 100' Side Eject Roller Gantry System
TRUSS EQUIPMENT
DePauw 5 Blade Floor Web Saw Location: TX Price: $11,900.00 -Power Angulation & Carriage -Internal (1,2,3,4) Blades are mounted at 90 degrees from each other -External(5) Cut-Off Blade -Lengths up to 14' -Vibrating Waste Conveyor(No Incline Conveyor) -480 Volt / 3 Phase Wasserman & Associates 800-382-0329 www.wasserman-associates.com
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
PHONE: 800-289-5627
2 Each - Tee-Lok 14’ Roller Gantries (Track Mounted). Slotted Top Tables with Pop-up Skatewheel Ejectors. Powered Exiting Conveyor with Receivers. Tee-Lok 14’ Finish Roller. Dismantled & Stored in Early 2011. Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™. $33,500 FOB SC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Mitek RoofGlider 14' x 24" Diameter Roller Gantry (Trackless). (13) Slotted Top Tables with Pop-up Skatewheel Ejectors. Roof Truss Jig Hardware & Bridge Plates. Roller Gantry Park Sections. 6 Powered Rollers, 6 Idle Rollers & 6 Receivers. Mitek 14' x 24" Diameter Finish Roller. $49,400 FOB CA Optional Equipment: Eliminate 99% of the set-up time & all manual jigging by retrofitting the tables with WizardPDS® drop-in ChannelS™ For more WizardPDS® Information visit: http://eideintegratedsystems.com/ Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
2006 Koorsen Plate Detector
Truss plate detector significantly reduces field repairs by indicating missing connection plates. Features adjustable height and missing plate alarm. Button controls on stand-alone console. +/- Footprint dimensions. 17’ x 3’ x 5’. Compatible with any type of truss roller. 110 volt, 1 phase electrical. $6,800 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #9
Adverti$er
Don’t Forget! You Saw it in the
Wood Truss Systems
inc.
765-751-9990 www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
LD
R P ed r u ice ct io n
Combining the qualities and expertise you should expect from an industry supplier
SO
2005 Robbins No-Rail Gantry
14'x180' trackless gantry with aisles. Includes (2) gantry heads, (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive. System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 440v, 3phase. Seller is willing to sub-divide this system. $79,000 NOW $59,000 FOB TX
PA
2008 IBS Yard Barn Wall Panel Line
FO
B
-
$24,900 FOB MI
Custom Yard Barn system includes Special 16' framing table with laser guided tool dollies with multiple panel set-ups (two 4' and two 2' sections), to squaring sheathing table, includes joy-stick controlled single-tool nailing bridge with tilt-beam function for accurate seams, System features full-length 40' Panel Transfer System with stops, two 20' skate-wheel conveyor sections and sheathing staging area with panellift, equipment in good working condition and available for immediate use, 230v, 3ph. (System priced new at over $130,000). $24,900FOB MI
2004 Ruvo 925 Door Machine Model 925 pre-hung door machine handles both interior or exterior doors. It machines the door, hinge jamb, strike jamb, drills and fastens the hinges for door sizes 6’-8” to 8’-0”. Handles door thicknesses of 1 3/8 inch or 1 3/4 inch. 440v, 3 phase electrical.. $19,000 FOB PA
R P ed r u ice ct io n
2005 (4) Projector SL Laser System Four-projector system with two computers, model SL 400205 GBPU, Pro director 4. Includes cables, 20’ projection area per head, green lasers. Software license required.
$31,300 :: FOB AZ Condition: Good
2005 Koskovich Auto Omni $52,900 FOB UT
NOW $49,900
Fax: 765-288-9991 PHONE: 800-289-5627
www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com
Phone: 765.751.9990 FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
June 22nd, 2012 #05147 Page #10
TRUSS EQUIPMENT
800-382-0329 www.wasserman-associates.com
2006 Hundegger SC-1 Lineal Saw with Milling Capacity $129,000 FOB Alberta -32' Loading Conveyor -Automated Infeed Wheel -Automated Positioning & Clamping -360 Degree Servo Drive Saw for Angle & Bevel/Compound Cuttting -Vertical End Mill Router -Special Stacked Bevel Cutter Mill Head -Outfeed Table with Rear Stacked Ink Jet System (16 Nozzles) -6 Arm Storage Deck -Stack Assistant -Y-Axis Cross Section Measuring Device -Electronic Controls & Operator Console with 2 Computers -A/C System for Electronic Control Cabinet -Remote Diagnostic System -Disposal Conveyor under Saw -Small Parts Ejector & Conveyor -480 Volt / 3 Phase
TRUSS EQUIPMENT
Klaisler Finish Roller Press
inc.
MANUFACTURERS’ REPRESENTATIVES
www.woodtrusssystems.com
Combining the qualities and expertise you should expect from an industry supplier
Hundegger SC-1 $310,000 NOW $280,000 FOB NY
Model SC 1 saw includes vertical finger mill with 5.5 kW router motor, 40mm end mill., 25.5" diameter blade, 12.3 HP, 1480 RPM saw motor, and REA 16 pin, single-head ink-jet print option. System includes Hundegger extended infeed deck with OEM automated clamping system which includes pressurized horizontal and vertical clamps that hold and straighten twisted, bowed, and curved lumber; outfeed framework: gripper wagon is mounted – rack and pinion system. Saw is a computer numeric controller (CNC) saw capable of cutting a wide range of roof, floor, and wall framing components, including I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lam. The saw can also cut 2x dimensional lumber stacked up to four pieces deep. Hundegger's Whole House Saw quickly and efficiently processes all types of cuts and profiles used in house construction. Comes with operator console, flat screen monitor, and industrial keyboard, Hundegger computer loaded with Windows XP/built in LAN card, and electronics cabinet which is A/C climate-controlled. Complete with waste conveyor system and incline, The SC 1 is upgradeable by OEM. OEM maintenance program, tech support and expert installation available at additional cost. 480 volt, 3 phase power.
PHONE: 800-289-5627
LD
Wood Truss Systems 765-751-9990
Trackless floor truss press includes gantry head with 20 inch diameter roll, 6' x 45' steel table (42' working length). Builds from 12" to 27" deep trusses, up to 42 foot long. Gantry has toggle forward / reverse & panic-stop controls. 220 volt, 3 phase electrical. $18,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
SO
8
Tee-Lok Trackless Floor Truss System
2002 MiTek Tee-Tracker Gantry System 14' X 72' side-eject, trackless system complete with (10) 6' X 14'slotted, 3/4" steel-top tables w/ejectors to powered transfer rollers, (66 tables available), 10 powered, 18 idle outfeed conveyor (140’ @ 5’ o.c.), MiTek Tee-Tracker Gantry head 14' X 24" dia. (seven available) featuring joy-stick control, Demag Gmb motor and drive components with Auto-Lube. System includes dual park stations, electrical festooned cable, bridge-plates, all available hardware, etc. 460v/230v, 3ph, 60Hz. Two (2) 14’ X 24" diameter MiTek final rollers available at an additional cost to complete a system. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Read/Subscribe online at www.componentadvertiser.com
Klaisler TR214-24 Features two 5 HP motors with a frequency drive, two 24 inch diameter rolls, 14 foot wide throat, push button controls, emergency stop, safety bars and limit switches. 230/460 volt, 3 phase electrical. $8,900 FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2003 MiTek Railrider Floor Machine Model 82500-502, 24 inch diameter gantry head with riding platform and push-button controls. Machine builds floor-trusses to 42 foot working length (54 foot overall length) truss depth capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, plate storage along table edge. Includes all available hardware. 230 volt, 3 phase electrical. $39,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TRUSS EQUIPMENT
Adverti$er
Don’t Forget! You Saw it in the
TRUSS EQUIPMENT
June 22nd, 2012 #05147 Page #11
SA
alter & ssociates
Engineered Wood Products Industry
Klaisler 6-40 Traveling Floor Machine Tee-Lok Side-Eject 24" dia Gantry 165' Side-eject system with (22) Tee-Slot 6'x14' slotted steel-top tables, Two (2) TeeLok 14'x24" dia. roller gantries, soft start, direct drive gear motors. System includes air-manifold and available jigging hardware. System includes Tee-Lok 24"x14' dia final roller, transfer roller to inside and outside power/idle conveyor. 480v, 3 ph. (Can be sold in lesser quantities to create a customlength system). $49,900 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1994 Pacific Automation Auto 8 Gantry System
8'x40' hydraulic press system specifically designed for smaller trusses. No finish press required, system includes single joystick control, operator platform and drilled / tapped, steel, table building surface. 50 ton press capacity. 230 Volt, 3 phase electrical. $10,990 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Page 7 No Change...
Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has twohanded push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 460 volt, 3 phase electrical. $6,900 FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2006 MiTek TK-8 Clamp System MiTek TK-8, Qty. 1 20 ton C-clamp system with overhead beam, jigging, trolley, counter balance arm and manual drive. Reservoir is included. Approximately 14ft X 60ft production table. 220V 1ph electrical. $13,400 FOB OH Wood Truss Systems 765-751-9990
04 Mitek Rail Rider Reduced to $29,900 /FOB TX 7 X42 , 54 O/A. Trackless table design, Pop- up air ejectors, an overhead plate rack, a 9 shelf on each side of the table for plate storage and a riding platform. 24 roll -10HP motor w/electric softstart. Item F1026 Truss Machinery Connections 800-580-6430
PHONE: 800-289-5627
2005 Koskovich Jet-Set 23 Auto Jigging rails with 2 independent pucks per rail, special compact 12' assembly jigs to 13', 3 with cosmetic damage to face cover (2 new covers included in spare parts) Can be retrofitted to most table styles, installation available. Price listed per rail. $1,554, FOB IN. Wood Truss Systems 765-751-9990
Truss Equipment Installation Consulting
770.434.1006 www.salter.com
2001 Alpine (100’) Floor Track Gantry System #2 2001 Alpine (100’) floor track 2001 Alpine (100’) floor track gantry gantry system / (1) system / (1) 7.5 HP 24” gantry head / Model 705 / SN 705A1007/ (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL S22,000
7.5 HP 24” gantry head / Model 705 / SN 705A1006 / (14) (6’x14’) steel topped tables with 5” wide planks and 1 ½” unistrut “C” channels on each side / (1) pop-up skate roller conveyor / miscellaneous jigging hardware / overhead electrical / no electric poles / 240 volts 3 phase. FOB FL.
2001 Alpine (100’) Interior Exit Conveyor System
TSS Auto (6’-6” x 37’- 0”) Vertical Roof Truss Press
2001 Alpine (100’) interior (14’ x 6” diameter x 1” shaft) steel roller conveyor system / spaced 6’-0” on center / (9) powered rollers / (10) idle rollers (14) receiver arms for side “A” roof truss table and (14) receiver arms for side “B” roof truss table / purchased new 2001 Mechanical: 4½ Stars, Appearance: 4 Stars As-Is/Where-Is: FL
6’-6” wide x 37’-0” long clear span table supported with 16” steel “I” beams / Hydraulic vertical gantry head with a 16” wide x 6’-6” platen head / 240 volts but the motors are set up by the factory so they can quickly and inexpensively be rewired for 440 volts 3 phase . FOB GA $14,500
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #12
Adverti$er
Don’t Forget! You Saw it in the
Wood Truss Systems
765-751-9990 www.woodtrusssystems.com
inc.
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
2009 Stealth Trackless Gantry System (NY2)
$81,900 NOW $60,000 FOB: NY
Weekly updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com
The celebrations among North America’s solid wood sellers continued last week, as shocked customers were once again faced with strong prices. Dimension lumber stayed flat or eased off slightly, particularly in the west. It was once again panel products that were the hottest items, with prices improving further on previous weeks’ gains. Order files at dimension lumber mills were at four weeks, while plywood and OSB producers -- especially in the east -- continued to report a sold six week order file. Eastern plywood producers crowed about order files out to the first week of August. It is not reasonable to expect panel prices to remain flat, let alone soften, any time this season. And possibly far beyond it. Benchmark WSPF KD 2x4 #2&Btr prices held firm at US$308 mfbm last week. This is a $78, or 25 per cent, improvement over mid-June 2011.
14' x 80' trackless side-eject gantry equipment with (10) all slotted-steel, continuoustop 6'-6" tables, (10) side ejectors. System features a 36" Stealth gantry roller, and (4) 14' transfer rollers, and with limited conveyor: (4) 14' inside pwr/idle conveyors, and (6) 14' outside conveyors. System was OEM refurbished in 2010, 460 volt, 3 phase power. OEM support and installation available.
In panel, benchmark OSB 7/16” Ontario rested for another week at C$260 msf, a $20, or almost 8 per cent, increase over one month ago and a $60, or 23 per cent, rise over this time last year. Its plywood partner however, Canadian Softwood Plywood 3/8” was the star of the week, rising another $9 from the week before to C$410 msf. This plywood commodity as climbed $57, or 14 per cent, since last month, and a whopping $115, or 28 per cent, compared to mid-June last year. Studs prices across species, sizes, and grades, remain at highs reached in May following the catastrophic loss of the Sinclar Group’s Lakeland stud mill in Prince George, BC. Hesitant customers tried, and failed, to bring prices down by delaying buying but only got caught having to pick up absolute necessity wood at higher prices in the following days. Mills are receiving rounds of calls asking for quotes; anyone who doesn’t jump in and buy is forced to call back later. But by then mills are quoting higher than the previously-unacceptable highs. Caught with no inventory, customers are forced to accept the increases. Counter-offers are being laughed off with impunity. The banks of the mighty Fraser River have swelled to levels not seen since 1972. A combination of late snow melt and heavy rains has brought flood warnings to several regions of the BC interior, where many saw milling and logging operations take place. The Fraser is expected to crest at the end of this week.
R P ed r u ice ct io n
Dimension Lumber Key Prices
8 $14,900
PHONE: 800-289-5627
For this week’s prices subscribe to Madison’s at www.madisonsreport.com
Product WSPF 2x4 WSPF 2x6 WSPF 2x8 WSPF 2x10 WSPF 2x4 Stud D.F. Green 2x4 D.F. Green 2x10 ESPF KD 2x4 8ft. Stud OSB Ontario 7/16 Read/Subscribe online at www.componentadvertiser.com
Last Week $308 $298 $324 $378 $360 $238 $280 $415 $260
Change +1 -1 0 0 0 +3 -5 +5 +15 FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TRUSS EQUIPMENT
June 22nd, 2012 #05147 Page #13
Adverti$er
Don’t Forget! You Saw it in the
TRUSS EQUIPMENT
Wood Truss Systems
inc.
765-751-9990 www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
R P ed r u ice ct io n
1994 (50') Robbins Roof Truss Gantry 1997 Pacific Automation Auto-8 (40’) Truss Press -8' x 40' Drilled & Tapped Steel Table -50 Ton Hydraulic Press -24" x 96" Platen -Floor Truss Jig -Press 2x4 and 4x2 with no adjustment. $29,500 FOB ID. NOW $13,900 Wasserman & Associates 800-382-0329
LD
Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990
2006 MiTek Infeed Deck 2006 MiTek live deck with foot controls, 19’ wide x 21’ long footprint, 3 HP motor, 25 fpm speed and 15,000 lb capacity. Disassembled and ready to ship. 440 volt, 3 phase electrical. $4,900 FOB ID Wood Truss Systems 765-751-9990
2002 Tee-Tracker System
SO
Design your own custom roof truss gantry!
MD Super Torque / 10 HP / 7 ea. (5’x14’) steel tables with 2x6 underlayment and 1” dense plastic top / Includes (4) ea. uni-strut channels per table /(1) ea. pop-up skate roller per table / (6) Receiver arms / No Exits rollers / 15 ea. 24’x16”x1’ bridge plates / (65’) floor track / 230 volts 3 phase. $15,000 FOB GA Salter Associates 770-434-1006 www.salter.com
$68,140 FOB TN & TX
14' X 96' side-eject, trackless system complete with (16) 6' X 14'slotted, 3/4" steel-top tables w/ ejectors, (38) outfeed conveyors (190’ @ 5’ o.c.), two (2) MiTek TeeTracker Gantry heads (14' X 24" dia.) featuring riding platform, electrical supply mast, Demag Gmb motor and drive components with Auto-Lube, complete with 14’ X 24" dia. final roller. System includes park stations and all available hardware with some spare drive wheels, etc. 240v, 3ph, 60Hz.
8 PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TRUSS EQUIPMENT
June 22nd, 2012 #05147 Page #14
Adverti$er
Don’t Forget! You Saw it in the
TRUSS EQUIPMENT
Wood Truss Systems
inc.
765-751-9990 www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
2009 Stealth Trackless Gantry System with Auto Puck System 2005 MiTek RailRider End Eject Floor Machine
Tee-Lok 14' x 24" Diameter Finish Roller plus 4 Sections of Idle Conveyor
$125,000 $113,304 $89,000
End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter -Two 5 HP Motors gantry head roll, depth truss capacity from -Conveyor Section: 6'-6" x 12-0" x 33 1/2" 10 inches to 24 inches. Clamping fence FOB AZ - $6,500.00 Wasserman & Associates actuated by air cylinders mounted under 800-382-0329 the table, pop-up end-eject ejector idler www.wasserman-associates.com rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks. Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical. $49,000 FOB OH. Wood Truss Systems 2 0 0 3 R o b b i n s " S u p e r To r q u e " 765-751-9990 14' x 24" Diameter Finish Roller -230 Volt / 3 Phase -$9,900 FOB SK Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Two (2) 24” diameter x 14’ throat, track gantry heads, 15’-0 ¾” rail centers, two available at this location. Price per each. 460 / 230 volt, 3 phase electrical. Price: $6,900 ea. :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
R P ed r u ice ct io n
TRUSS EQUIPMENT
TRUSS EQUIPMENT
1997 MiTek Tracked Gantry System (TN) Price: $32,900 NOW $25,900 :: FOB TN Condition: Good Category: Roof Truss Description: 86' x 14' side-eject gantry system with (11) plastic top tables with strut, with (1) model 6800 gantry roller, (+/- 75') interior conveyor and (+/- 75') exterior rollers. Includes all available system hardware and stand-alone receivers. Can be paired with the 2008 MiTek finish press for an additional $15,200. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
n
PHONE: 800-289-5627
14' x 58' Trackless Gantry, Side-eject system with auto jigging system in a continuious all steel slotted top configuration. Featuring (12) Automated puck systems with system computer and stand, (8) 6'-6" table sections, (8) ejectors and (3) 14' transfer rollers. Includes one (1) trackless Stealth 24" diameter gantry roller, side-ejects to transfer roller leading to (12) 14' inside pwr/idle conveyors and (13) 14' outside conveyors. System includes a large 16' capacity Integrated Stealth finish press. 460 volt, 3 phase. System was OEM refurbished in 2010, continuing support and installation available.
e ic io r t P uc ed R
n
e ic io r t P uc ed R Stealth Peak-Up Stackers (2) Two (2) Peak-Up, Four Receiver Stacker Systems with four (4) arms each. Features four (4) stacker horses (2 left and 2 right) for use with scissor trusses, HD Drive System, Auto Indexing and spring assisted receiver arms. Holds up to 30 trusses from 16’ to 60’ in length. Price is per stacker. $19,950 $19,950 NOW $11,900 each FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
R P ed r u ice ct io n
2001 Alpine Track Gantry Heads (Qty. 2 Only 1 left)
FOB NY
1996 MiTek Floor Truss Gantry System Price: $13,900 NOW $11,900 :: FOB TN Condition: Good Category: Floor Truss Description: Model 66100 gantry with 24" dia. roller, builds trusses from 14" to 24" deep and up to 40' in length. Includes dual safety bars, pendant control and all available system hardware. $13,900 FOB TN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Read/Subscribe online at www.componentadvertiser.com
1999 Tee-Lok 40' Floor Truss Machine $18,800 FOB GA Wasserman & Associates 800-382-0329
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
WALL PANEL EQUIPMENT
June 22nd, 2012 #05147 Page #15
Adverti$er
Don’t Forget! You Saw it in the
WALL PANEL EQUIPMENT
2005 Panels Plus Framing Table Triad Wall Panel Line Four (4) station line includes Generation II framing table 10' x 20' long, squaring table 10' x 16' long with router bridge, squaring table with sheathing bridge 10' x 16' long includes laser, & tilt option, to router bridge section, and transition/exit table; No gundollies included, air-guns not included. 120 volt, 3 phase electrical, 100 PSI air. $18,900 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Panels Plus manual wall framer builds walls to 16’ length and from 8’ to 12' in height. Includes 3-gun tool dollies each side, stud locaters, pop-up skate-wheel transfer, and motorized telescoping arms for adjusting wall height. Table also includes subcomponent layout tables and skate-wheel transition conveyor. (120v, 1ph, 100 psi air supply). Table is a trackless design for easy install. $15,900 FOB AL Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
R P ed r u ice ct io n
800-382-0329
2004 IBS 12' x 16' Sheathing Table with Multi-Tool Bridge -26 Each - Senco FramePro 702XP Nail Guns -Plate Stitchers for Top & Bottom Plates -Bridge Tilt -Excludes Plant Net Computer/Enclosure
WALL PANEL EQUIPMENT
$24,900 NOW $22,900
FOB AB
WALL PANEL EQUIPMENT
n
e ic io r t P uc ed R NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer
JobLine.com
the
800-289-JOBS 2004 Virtek LaserMC Wall Panel Cutting & Marking System
Time To Hire?
-Automated Wall Panel Component Cutting & Laser Layout Marking as directed by Wall Panel Software Output -Vista Angle Boss Cut-Off Saw -20' Capacity -Left to Right Material Flow -Environmental Computer Enclosure with Computer/Monitor -Laser is burning light -Used for 2 years Location: KS, Price: $27,900.00 NOW $25,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
We’re here when you need help!
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329
2007 Panels Plus Sub-Component Nailer Maximum Opening: 17" x 17 1/2". On/ Off Switches for Each Nail Gun. Button to Activate Squaring Stop, Foot Pedal to Activate Clamping, Excludes Nail Guns $7,500 FOB LA Wasserman & Associates 800-382-0329
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Wood Truss Systems
You Saw it in the
inc.
MANUFACTURERS’ REPRESENTATIVES
Adverti$er
Don’t Forget!
765-751-9990
June 22nd, 2012 #05147 Page #16
WALL PANEL EQUIPMENT
WALL PANEL EQUIPMENT
Panels Plus Manual Framer
Reconditioned Panels Plus 10' x 20' Squaring Table
Combining the qualities and expertise you should expect from an industry supplier
2005 Viking ADT Wall Panel Framing System $37,990 FOB TX
Viking framing station with PreStage table and conveyors. Framing station model PS-Special, includes stud locators (16” & 24” centers), skate wheel ejectors, walk-through aisles, ½ HP motor and two (2) powered tool carriages. Discharge speed of 12” per second. Once staged the framing sequence is event driven: guns fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4’-2”’ to 12’0” high, in lengths up to 20’ long. Includes two (2) 4’x 8’ plastic top setup tables, (1) set of 5’ wide x 10’ long skate wheel conveyors and (1) set of exit conveyors 24’ long. System supported, and installation available from the OEM (Sold new for $132,000). 480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Guns not included.
16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skatewheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install. $17,900 FOB OH. Wood Truss Systems 765-751-9990
-Squaring Stops & Roller Conveyor -Motorized Telescoping Arms (for wall height adjustments) -No Rail or Track on Floor Increases Operator Safety and Simplifies Clean-up -Excludes Router or Panel Bridge $10,900 FOB NE Wasserman & Associates 800-382-0329
PCS/Mitek Power Framer with Smart Crane Auto Wall Panel Stacker $22,500 FOB NE. NOW $17,900 Wasserman & Associates 800-382-0329
2006 Triad "Diamond Quad" 12' x 16' Framing Table with Tool Dollies
NEED HELP WITH YOUR PANELS PLUS EQUIMENT?
$10,900.00 FOB TN Wasserman & Associates 800-382-0329
We offer:
Disassembly & packaging of equipment. Installation by trained personnel. Adjustment and calibration of equipment. Training for operators and maintenance workers. Recommend upgrade options. Assistance in getting your fastening tools mounted and operational.
Contact Information:
email: tkaasa@panplus.com Phone:507.377.5341 www.panplus.com www.youtube.com/panelsplus
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
Basic Automation 12' x 16' Interior/Exterior Wall Panel Line Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge, Includes (25) Senco Staple Guns. $14,900 FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
PHONE: 800-289-5627
Adverti$er
Don’t Forget! You Saw it in the
Read/Subscribe online at www.componentadvertiser.com
June 22nd, 2012 #05147 Page #17
FAX: 800-524-4982
omponent
anufacturing
You Saw it in the
TRUCKS & TRAILERS
TRUCKS
&
TRAILERS
R P ed r u ice ct io n
TRUCKS & TRAILERS
Adverti$er
Don’t Forget!
1994 Wabash T-30 Trailer
48 ft long, sliding tandem, fifth wheel neck, hydraulic lift, no locking rollers, passed DOT, no ABS, brakes average. 68,000 lb. capacity. $8,100. NOW $4,900 FOB MI. Wood Truss Systems 765-751-9990
2008 Precision 42-60' Stretch Roll-Off Trailer (4001c) Price: $19,900 :: FOB TX Condition: Good Category: Trailers and Rolling Stock Description: Precision roll-off 42 x 60 ft stretch trailer, 102" width. Features include ABS, locking rollers, controllable rollers, sliding tandem axle, hydraulic lift neck and expanded metal deck between rolls. Needs two tires and one replacement roller. 64,000# GVWR. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1999 Western Star Truck with National 990 Crane Model 4964F Truck with 20’-6” Flatbed. 475 HP CAT Engine. 8 Speed Manual Transmission. 215,885 Miles, National Model 990 Crane, Crane Capacity: 46,000 Lbs. 90’ Boom with Jib Option. $74,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
TRUCKS
&
TRAILERS
SO LD
M ACdverti$er
June 22nd, 2012 #05147 Page #18
2003 Iron Steer 30' Gooseneck Roll-Off Trailer -Model 12R30 -12,000 Lb Dexter Tandem Axles. -Bed Tilt -LED Lights $11,500 NOW $8,500 FOB NY Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Price Reduction
Page 15 No-Change ...
1997 Haulin 48' Roll-Off Trailer
2000 Raglan Trailer 48’
-Sliding Tandems -Hydraulic Neck -DOT is Current FOB IN, $5,900.00 Wasserman & Associates 800-382-0329 www.wassermanassociates.com
48 ft long, sliding tandem, fifth wheel neck, electric lift, locking rolls, passed DOT in April of 08, no ABS, brakes average. 78,000 lb. capacity. $9,800. NOW $7,800 FOB MI. Wood Truss Systems 765-751-9990
2004 Pratt 48' Roll-Off Trailer -Sliding Tandems -Hydraulic Neck $8,500 FOB OH Wasserman & Associates 800-382-0329 www.wassermanassociates.com
01 Haulin (Stretch 48 -70 ) $8,900 /FOB FL Dual axle trailer in good working condition. Some minor surface rust. Slanted profile w/ fixed tandem. 68,000 Gross Vehicle Weight Rate and a Gross Axle Weight Rate at (2) 20,280. #T1016 Truss Machinery Connections 800-580-6430
1989 Western Star Boom Truck & Trailer Combo Price: $89,990 :: FOB WA Model 4964F boom truck, NTC 365 Cummins diesel engine, 18-speed transmission installed in 2008 (has only 5,000 miles on it), 1994 National Crane model 600C, 81 foot crane, recently refurbished at a cost of $10,000, 447,000 miles. 54,000 lb. GVWR. Includes one (1) custom built, peak-up truss trailer, with three axles, stake pockets, 1/4" thick steel wheel fenders, moveable light bars. Trailer can be purchased separately for $11,990. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
1995 Wabash 36'-50' Stretch Roll-Off Trailer
2005 Pratt 36'-50' Stretch Roll-Off Trailer Sliding Tandems, Hydraulic Neck. $17,900 FOB OH. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
-Sliding Tandems -Hydraulic Neck -Less than 500 Miles on Tires $9,900.00 FOB CO. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Read/Subscribe online at www.componentadvertiser.com
1999 Sterling Tractor 1999 Sterling L7500 truck tractor. Tractor has a 3126 CAT diesel engine, 224 HP, CD player, cruise, 22.5” tires, 180,000 miles, 8LL transmission and passed DOT inspection. $11,900 FOB CO. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FAX: 800-524-4982
M ACdverti$er omponent
TRUCKS
&
anufacturing
TRAILERS
June 22nd, 2012 #05147 Page #19
Adverti$er
Don’t Forget! You Saw it in the
MISC.
Wood Truss Systems inc.
765-751-9990 www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Combining the qualities and expertise you should expect from an industry supplier
1997 PCS Hercules Auto-Feeder 1997 ASI 48-72' Stretch Trailer Price: $16,900 :: FOB TN Condition: Good Category: Trailers and Rolling Stock Description: ASI model 5AM stretch trailer from 48 to 72 feet, features sliding tandem axles, electric roll-off controls, fifth wheel connection and hydraulic lift. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1999 Holz-Her Accura "S" 14' Beam Saw Model CA80. 230V 3ph. $12,500 FOB NE Wasserman & Associates 800-382-0329
MISC.
2006 Allison Material Carts
Refurbished 2005 Hain 20Ft. Measuring System 2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Material carts feature heavy duty tubular/CChannel construction with two (2) uprights, 3' x 5' with four (4) phenolic casters (fixed) allowing for "teeter" maneuvering. Quantity of (35) available. $95 EA, FOB SC Wood Truss Systems 765-751-9990
$4,499 FOB SC Model HAF-620 for component saw, handles lumber from 3’ to 20’, 6 rail/pedestal, safety-guarded sprockets, SM-Cyclo gearmotor, HD I-beam construction, photo-eye lumber stop PLUS foot-pedal control, adjustable swivel base feet, easily shipped and installed. 460V, 3ph. MISC.
MISC.
Virtek Laser Projection Heads QUANTITY ten (10) 4 red-laser heads (only) for up to 140 ft. projection @ 16' ceiling ht. Heads are model LPS-2D that were under OEM maintenance agreement since installation. Virtek license agreement required, OEM inspection required to obtain continuing maintenance agreement and installation. Contact us for serial number history per OEM records. $39,900 NOW $11,900 for all 4 FOB IN. Wood Truss Systems 765-751-9990
Like New Altman Model 122 Dustless Sheetrock Saw Call for Price. FOB NE. Wasserman & Associates 800-382-0329
Your Ad Could be Here 1999 Sullair LS-10 Compressor with SR Dryer 25 hp Sullair rotary screw air compressor, model LS-10. Rated 111 CFM @ 100 PSI. Also includes Sullair SR-175 dryer. The compressor is 230/460V and the dryer is 230V, 1 phase power. $8,000 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
Murphy-Rodgers MRT-9A Dust Collector -Air Delivered: 1,740 CFM -Free Air: 2,400 CFM -9" Inlet -5 HP / 3 Phase Motor with Starter -Includes 2 Filter Bags, Plenum & Vertical Piping to Plenum -Add $100 for (2) 55 Gallon Drums
Read/Subscribe online at www.componentadvertiser.com
$990 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #20
Adverti$er
Don’t Forget! You Saw it in the
Wood Truss Systems
765-751-9990
inc.
www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
Price Reduction
800-382-0329
Combining the qualities and expertise you should expect from an industry supplier
8
2006 Omni Miser Automated Material Picking System $89,000 FOB SD
-Incline Live Deck -(1) Standard Bulk Feeder -(3) Shuttle Bulk Feeders -(3) Magazines -New Price is Over $325,000! Option to Omni Miser Picking System. -The standard NEW
2005 Williams Pulverizer
WoodRunner System is $119,900 $114,900 which includes 4 Bunk Stations & 1 Pieces Station (with 3 Magazine Racks & 1 Manual Load Shelf) -Eliminate the picker and dramatically increase the Omni Miser or ALS Saw output with the WoodRunner!
Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, hopper and discharge ductwork. Generates 1 ½ tons of material per hour maximum capacity. The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power. Serial #20585.
$8,000 FOB TN
Click for WoodRunner Details: http://apexmw.com/ MISC.
MISC.
MISC.
1987 Jager TTS Auto Lumber Stacker $14,900 FOB NB Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2005 Kaeser Model ASD40 Air Compressor with Kaeser Model TD51 Dryer -Direct Drive Rotary Screw Compressor delivers 191 CFM at 125 PSI -Storage Tank -40 HP / 480 Volt / 3 Phase $9,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
MISC.
2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2004 MiTek Lumber Splicer MiTek Chord Splicer - Model 88560-501 - Hydraulic system splices 2x4 chords (minimum material length 17") for floortruss operation with maximum plate size of 3" X 12" with dual action pressing platen. Dual hand controls, and magnitic plate positioning allows for safer operation. Plate storage bin, and conveyor. 5HP motor, 20 gal. hydraulic reservoir, 460v, 3ph, 60Hz. Wood Truss Systems 765-751-9990
Read/Subscribe online at www.componentadvertiser.com
Lumber/Teeter Carts -20 Available -6,000 Lb Capacity -Rubber Tires & Swivel Casters Location: SC, Price: $395.00 Each Wasserman & Associates 800-382-0329 www.wasserman-associates.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
MISC.
You Saw it in the
MISC.
Door & Stair Equipment
Roller Table (16' x 5' x 32") Mitek Lumber Splicer HP Hydraulic System. 3" x 12" Maximum Plate Size (2x4 Material). Magnetic Platens for Plate Placement. Pneumatic Lumber Clamps. Foot Pedal Control for Clamping, Dual Push Button Control for Pressing. $4,750 FOB WY Wasserman & Associates 800-382-0329
Adverti$er
Don’t Forget!
-Gravity Rollers at 2' O.C. -3 Available, $800 ea, FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Full House Strike Jamb Router Location: NY Price: $1,300.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Wood Truss Systems
inc.
June 22nd, 2012 #05147 Page #21
Door & Stair Equipment
Reconditioned RUVO Staircase Assembly Clamp Location: OH Price: $4,900.00 -14' x 4' Capacity -Air Cylinder Clamping -16' x 4' Stair Clamp available at $5,400 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
MANUFACTURERS’ REPRESENTATIVES
NEW Strong Hold Topview Computer Cabinet 26" Wide x 24" Deep x 66" High with 6" Legs. Polycarbonate Window. WeldedIn 12" Deep Keyboard Shelf. Three Point Locking System. Fan for Hot Air Evacuation. 2 Adjustable Shelves in Lower Cabinet. $950 FOB NE Wasserman & Associates 800-382-0329
2007 MiTek Ready Feed Live Deck Auto-Feed live deck for component saw. 14' wide x 20'-6", 5 rails, safety-guarded sprockets, HD I-beam construction, footpedal control and adjustable height. Easily shipped and installed. 230V, 3 phase power. $7,500 FOB AL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
SO
LD
Norfield Vertical Door Loader
MiTek PCS Component Express Conveyor M iTek / P C S C o m p o n en t Express conveyor, transfers wall subcomponents & parts between nailing stations and a framing station. Toggle controls, (2) 18” wide conveyors, 5 feet long each, included. 1 HP motor. 480 volt, 3 phase.
$3,200.00 NOW $1,500 FOB TX
765-751-9990 www.woodtrusssystems.com
2,800 Lb Capacity. 48" Stack Height 480 Volt / 3 Phase. $9,500 FOB TX Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Norfield 1020 Double-End Trim Saw
Norfield 1020 Double-End Trim Saw Miter cuts or square cuts can be compound/ beveled up to 10º to create a snug fit for any casing material, hopper fed, compound angle adjustments for a variety of cuts, 10” blade, easy adjustment for 45º to 90º , Material width from 1’6” to 8’0”, length from 1” to 3.5”, thickness from 3/8” to 1.5”, at an average of 24 cycles per minute. 230V, 3PH $10,900 Wood Truss Systems 765-751-9990
Full House Double End Trimmer Cut Casing, Jambs, Door Stop & Brickmold. $5,850 FOB NY. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Read/Subscribe online at www.componentadvertiser.com
Triad/RUVO Model 928 PreHung Door Machine with Triad/RUVO Model 1275 Door Assembly Table Location: NY Price: $28,800.00 -Excludes Bostitch Staple Guns Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Your Ad Could be Here
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Hiring Zone
JobLine.com, inc.
The
800-289-JOBS
Adverti$er
Don’t Forget! You Saw it in the
June 22nd, 2012 #05147 Page #22
new equipment showcase
Automated Jigging System AUTOMATE YOUR ROOF TRUSS LINE WITHOUT MOVING A TABLE
Time To Hire? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
IMMEDIATE! M-Fam Truss Estimator(s) & Designers Needed in Texas
NOW!
send your resume to mail@thejobline.com or Register On~Line at www.thejobline.com Strictly Confidential!
AUTOMATE
SETUP TRUSS PROFILE IN 60 SECONDS OR LESS
RETROFIT ANY ROOF TRUSS TABLE; WOOD, PLASTIC OR STEEL MINIMIZE DOWNTIME,
ONSITE INSTALLATION SAVES THOUSANDS OF DOLLARS AS OPPOSED TO OTHER RETROFIT SYSTEMS
THE LEAST EXPENSIVE DUAL PUCK RAIL SYSTEM ON THE Priority: Immediate Search Designer/Estimator Truss/Lumber Location: Texas Designer/Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package estimating experience is a plus. Projects include commercial/ multifamily. Compensation $45-55k (relocation assistance negotiable) Txt ID: J10493 to 406-210-1226
MARKET, GIVES YOU A COMPETITIVE EDGE
To learn MORE about MangoTech Automated Jigging visit us at www.MangoTech.com.au Contact us at Sales@MangoTech.com.au or 866-GO-MANGO
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #23
Adverti$er
Don’t Forget! You Saw it in the
Hiring Zone
new equipment showcase
JobLine.com, inc.
The
800-289-JOBS
Introducing the:
Purlin Plunger
SET TRUSSES FASTER WITH PREDRILLED PURLINS
Time To Hire? We’re here when you need help! visit: www.thejobline.com
Pre-Drill & Mark Only 2-3 Hammer Blows (60d Nails) Purlins Reduce Field Labor by 25-30% Set Trusses Faster & More Accurate Reduce the Exposure to Jobsite Fall Hazards Pre-Drilled & Marked Purlins (Shown)
email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
Florida! Designer/Senior Designer Truss Location: Florida Details: Opportunity for a Senior Designer with 3-5+ years of experience in wood truss design. The ideal candidate will have Alpine Software experience. Please inquire for additional information. Txt ID: J10487 to 406-210-1226
Immediate Search Position: Plant Operations Manager - Truss Location: Rocky Mountains
Visit us at www.SQ-1Design.com
Specifications and Gallery
Multi head, (3) 1/2HP industrial-duty drill head design allows for pre-drilling purlins from 4’up to 20’ in length with 5.6 sec. cycle time
Drill heads feature “quick stop” clamping for fast drill head location movement
Drill bit detection provides warning to operator in the event of drill bit failure
Features shaft driven infeed/outfeed material handling chain conveyor. Belt conveyor transfers drilled purlin to outfeed deck with auto-eject feature
Vertical and horizontal air clamping results in consistent and accurate hole placement
Touch screen PLC controls create user friendly operator interface for both manual and automatic operation
Automatic operation features material detection devices resulting in activating indexing of all sequences and transfer to outfeed material deck.
1ph. 230V power
Operations/Plant Manager needed with 5+ years truss industry experience. Responsible for estimating, costing, purchasing design, administration and production. No sales responsibility. Plant size $3M+ Compensation: $75k+- (relocation assistance negotiable) Txt ID: J10494 to 406-210-1226
Clamping
PLC Touch Screen Control
Drill Bit Sensor
Centerline Marking
Outfeed Deck
Outfeed Belt Conveyor
Outfeed Ejectors
Drill Head Adjustment
Sean Hubbard 317-440-2804 Sean@SQ-1Design.com Fax 320-210-4237
Jay Bunyard 317-354-5438 Jay@SQ-1Design.com Fax 320-210-4237
Catch us on Scan our QR code to view our latest video
thejobline.com PHONE: 800-289-5627
http://www.youtube.com/watch?v=78A3uIJGj4U
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #24
Adverti$er
Don’t Forget! You Saw it in the
new equipment showcase
On the Cutting Edge... New! Porta Field Press
New! Roll Splicer
The Measuring System (MEA) is the fastest, most consistent way to measure and cut your product! Read more about where this machine can be used, and how it can be added to your existing sawing equipment.
The Vent Block Drill (VBD) is designed to make lumber, truss and wall panel manufacturing yards more efficient by easily converting scrap wood into useable vent (frieze) blocks in seconds.
Phone: 530.295.8068
Fax: 530.295.0468
Email: margie@thehaincompany.com - www.thehaincompany.com P.O. Box 238 - Rescue, CA 95672
Features: • • • • • • • •
Vertically Splices 2x3, 2 x 4, and 2 x 6 lumber (3 to 4) second align, roll, eject, cycle time (2) recessed / simutaneous activation required / saftey controls Guarded motor and sprockets 3 HP heavy duty Sumitomo brand electric motor Air operated / bearing mounted / solid steel hold down rollers Both top and bottom bearings are adjustable with single crank Anti-abrasible resistant steel wear slide plate in the splice area
Call 770-434-1006 For Details Salter & Associates www.salter.com
We go to any lengths to expand your opportunity. PHONE: 800-289-5627
Features: • • • • • • • •
Presses roof and floor trusses 4 x 4 " p l a t e n 5 ton, 1 1/8 dia Cylinder 5 ton, C-Clamp-Weight 35 lbs 10,000 psi hydraulic 2 stage power unit / 110 Volts-Weight 40 lbs 10,000 psi 10' length hose Simple toggle switch operation Magnets hold connector plates while moving press unit into place
Direct Lender Financing Ed Ragofsky 561.309.7652 eragofsky@msnbank.com
You find the opportunity -- we’ll build you the products to meet it. Whether it’s a 70’ squaring table or a 16’ sheathing station. We have a proven track record of building robust, well-engineered equipment within your time frame. And we install it and start it up promptly.
Each of these machines was built to provide custom details to fit the customer’s plant.
76 feet of Expanded Wall Opportunity required a “custom built “ wall table with optional Dual Beams & Plate nailing tool carriages.
• Wall Framers
• Combination Tables – frame, square & sheath on one table
• Single or Dual Tool Beam Sheathing Bridges
Contact Tim Kaasa about custom solutions for your plant Wall Framing Made Simple
An
Company
866.726.7587 or www.panplus.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Hiring Zone
JobLine.com, inc.
June 22nd, 2012 #05147 Page #25
Adverti$er
Don’t Forget! You Saw it in the
new equipment showcase
The
800-289-JOBS
800-382-0329 email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
NEW Monet DeSauw Wood Finger Jointing Line
@JobLine Business Development Manager Laminated Beams Location: South (Carolinas centered) Work with the Sales manager to determine commercial business potential in the South and surrounding states. Build relationships with contractors, architects, designers, and business owners in the commercial industry using Glulam products; responds to RFQs, sources take offs & shop drawings, prepare quote proposals & letters, estimates freight, generates bid documents, completes internal files, and manages orders & shipments for awarded bid. Txt ID: J10485 to 406-210-1226
Design Manager/PE CET, AScT PE, CET, AScT Design Manager or Senior Designer who can implement an improvement program, training, and grow current department capabilities.. The candidate should be very technical, have strong MiTek experience, be people oriented with an ability to get results. The employer wants someone who will commit and become part of the company family. Location is central Canada, cold winters, snow, truly 4 seasons so you southern candidates are not likely to get considered without some history in a similar region. Dollar volume $10M now, but lots more in the past and looking like it will continue to grow from here. Compensation: $65-75k, depending on your ability, experience, and fit in the job. They have a performance based bonus program. Canadian CET or AScT, or Degreed Architectural or Civil Engineer preferred. Detailed job description is available. Txt ID: 10486 to 406-210-1226
PHONE: 800-289-5627
Cut-Off/Shaper Unit. 5 HP Saw to Cut-Off Angles. 25 HP Cutter Head to Shape/Fingerjoint Ends. Shape up to (8)2x4's or (5)2x6's. 480 Volt / 3 Phase / 60 Amp. Glue Station - Apquip Glue Applicator & Valve. 6 Gallon Glue Pot. 110 Volt / 1 Phase / 15 Amp. Finger Joint Press -Hydraulic Press for 2x4 and 2x6 Material. Internal Cut-Off Blades for 8' & 9' Studs. 480 Volt / 3 Phase / 20 Amp. Includes Installation & Training in the United States & Canada. -Reduce Waste Advantages: -Positive Ecological Impact -Produce Straight Material
$79,900 FOB MO
www.wasserman-associates.com Hiring Zone Immediate Search Estimator - Truss/Lumber Location: Texas Estimator familiar with MiTek software, roof and floor truss. Lumber or framing package design experience is a plus. Projects include commercial, multifamily, government, and industrial. Compensation $45-55k (minimal relocation assistance possible) Txt ID: J10498 to 406-210-1226
Priority: Immediate Search Outside Sales - Truss/Panel Location: DC/Metro Looking for an Outside Sales rep in the DC/Metro market and surrounding areas who can bring $3-4M+ to the table. Floor Truss, Roof Truss, Wall Panels and EWP. This highly successful manufacturer has multiple plants and can easily handle all you can sell. Excellent reputation for quality, competitive pricing and on time delivery. Manufactures Roof & Floor Trusses, Wall Panels and EWP. Compensation: $70k-+, 6 figures possible Thom's Notes: One of my top 5 employers. Great benefits and outstanding advancement potential. Txt ID: J10496 to 406-210-1226
Priority: Immediate Search Designer/Senior Designer Truss/Panel/I-Joist/EWP Location: Edmonton, Canada
Priority: Immediate Search Production Manager - Truss/ Panel Location: Midwest
This is a Job in EDMONTON CANADA
Direct production of wall components, roof and floor trusses and floor systems for custom, single family homes. Plant produces 175+- homes a year. reporting to this position are 8-15 production workers. Responsibilities include production, scheduling, costing and purchasing 5-10+ years components experience required. Will consider move up if qualified.
I am looking for a high energy designer who is willing to learn and apply all aspects of truss, panel, I-Joist, and EWP design. Experience required: 5+ years in component design plus JobLine skills evaluation above average. Primary duties include design, layout, optimization, and cutting/ production documents. Secondary duties include customer service. Skills required include MiTek software, AutoCAD, will consider equal brand experience, math skills, and blueprint reading. Components include: floor trusses, roof trusses, framing components, I-joists, EWP, hardware. Compensation: Salary from $45-75 CN depending upon experience and performance. Relocation is open to negotiation. Thom's Notes: If you are a US Citizen, the employer will also consider your application. NO DEGREE REQUIRED! Txt ID: J10497 to 406-210-1226
Read/Subscribe online at www.componentadvertiser.com
Compensation: $45-60k base salary, plus bonus potential when profits return. Vehicle w/expenses provided. Average 45-50 hours per week in peak season. Company benefits package, bonus program, vacation plan, and 401k program are detailed in our Company Profile. Relocation assistance negotiable. Thom's Notes: I need a true Operations/Plant Manager with career that doesn't require a major step back for this opportunity. Txt ID: J10041 to 406-210-1226
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #26
Adverti$er
Don’t Forget! You Saw it in the
Hiring Zone
new equipment showcase
Wood Truss Systems
765-751-9990
inc.
www.woodtrusssystems.com
MANUFACTURERS’ REPRESENTATIVES
JobLine.com, inc.
The
800-289-JOBS
Combining the qualities and expertise you should expect from an industry supplier
WoodRunner by Apex Machine Works $114,900 FOB MN
8
email: thom@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
Truss/Panel Designer Location: New England Truss and wall panel design using MiTek software on single and multifamily projects. Has to be able to hit the ground running with strong wall and truss skills. Ability to step into the desk and instantly use MiTek software is a non-negotiable requirement. Compensation: base pay $45-55k+depending upon experience. Relocation is acceptable with reasonable expenses paid and is open to negotiation. Txt ID: 10482 to 406-210-1226
The WoodRunner is a revolutionary step forward in automated lumber retrieval systems. As a totally automated system, the WoodRunner eliminates the costs and limitations associated with manulally fed saws. This proven technology brings a new level of versatility, efficiency and accuracy to picking and feeding lumber to saws like Omni Mizer, Alpine's ALS and other linear saws. Click on the photo for additional images, a brief VIDEO, or to download a Brochure and a footprint layout for Wood Runner Miser Specs or Wood Runner Alpine ALS Specs.
Hiring Zone
Truss Designers & PEng.(s) Needed in SK & MB Canada NOW! send your resume to mail@thejobline.com or
Register On~Line at www.thejobline.com Strictly Confidential! PHONE: 800-289-5627
Sales/Plant/Design/Estimating Manager Are you a multi-tasker with the ability to grow sales, lead design, and manage operations for a plant that has potential to produce $20M? The job requires someone who has experience with total takeoff, design/layout/engineering using MiTek software, manufacturing operations, and managing multiple department while focusing on growing sales. The ideal candidate will have either been a GM or past owner, who came up through the business in manufacturing, design or sales. If this is a possible match for what you are looking for, let's talk! Email to request information thom@thejobline.com
IMMEDIATE OPENING Estimator - Truss Location: Mid Atlantic We need a experienced Estimator for Single Family Custom, Commercial, and Multifamily truss, panel and EWP. Must have experience with MiTek eFrame for estimating or Sapphire software. Truss Design is not the main focus of this job. Other pre-screening specifications apply Compensation: $20-26hr.+- +OT based on ability and experience. Relocation assistance is negotiable.
@JobLine
Read/Subscribe online at www.componentadvertiser.com
Catch us on
thejobline.com
URGENT-NEED NOW! Designer - Truss Priority: Immediate Search Location: Texas JobLine Senior Designer ranking or WTCA III certification, and MiTek software experience required for this position. Prefer someone with commercial and multifamily and having wall panel experience is a plus. $50-60k+- to start, relocation assistance negotiable. Txt ID: J10480 to 406-210-1226 FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er Seguridad en el uso de Herramientas de Carpintería
Don’t Forget! You Saw it in the
Safety First! Safety Meeting Topics From State Fund CA.
Woodworking Tool Safety Woodworkers use power tools such as saws, drills, routers, planers, sanders, and lathes along with hand tools such as chisels, carvers, and augers to shape wood into functional and artistic objects. While wood crafting, woodworkers need to keep safety in mind.
June 22nd, 2012 #05147 Page #27
Los carpinteros usan herramientas motorizadas tales como sierras, taladros, acanaladoras, cepilladoras, lijadoras, y tornos junto con sus herramientas de mano tales como cinceles, cepillos y barrenas para conformar la madera en la construcción de objetos artísticos y funcionales. Mientras trabajan con la madera, los carpinteros deben tener en mente su seguridad.
Capacítese en el uso de las herramientas motorizadas y de mano que utiliza en su trabajo. Lea los manuales de las herramientas motorizadas y asegúrese de entender y cumplir con todas las instrucciones. Siempre inspeccione todas las Get training on the power and hand tools that you work with on the job. Read herramientas antes de usarlas. Asegúrese de que los cordones eléctricos estén en the power tool manuals and make sure that buenas condiciones y tengan buena conexión a tierra. Rotule y you understand and follow the instructions. saque de servicio, deseche o repare cualquier herramienta que Always inspect your tools before each use. no esté en buenas condiciones. Asegúrese de que las cuchillas y Make sure that power cords are in good las superficies estén limpias y afiladas para brindarle el máximo shape with proper grounding. Tag-out, control. Dé mantenimiento periódico a las herramientas discard, or repair the tools if they are not in dependiendo de la cantidad de uso que reciban. good working order. Make sure that cutting Vista ropa apropiada y ceñida, y átese el pelo largo al blades and surfaces are clean and sharp to hacer trabajos de carpintería. Evite usar artículos de joyería give you the best control. Conduct periodic o ropa holgada que se pueda enredar en partes móviles o maintenance on the tools depending on the giratorias. Use calzado con suelas antideslizantes para evitar amount of use they get. caídas. Los anteojos de seguridad le protegen los ojos contra Wear appropriate, close-fitting clothing el aserrín y objetos que vuelan. Una máscara contra el polvo and tie back long hair for woodworking. y un área bien ventilada le protegen los pulmones contra la Avoid jewelry and loose clothing that could inhalación de partículas pequeñas de madera. La protección be pulled into moving and rotating parts. para los oídos los protege contra los ruidos del taller. Guantes Wear slip-resistant footwear to prevent ceñidos, cuando sean necesarios, le protegen las manos al falls. Safety glasses protect your eyes from manejar los materiales. sawdust and flying objects. Dust masks and Use las buenas prácticas de seguridad al trabajar en a well-ventilated work area protect your carpintería. Piense primero antes de meter las manos o los lungs from inhaling small wood particles. materiales cerca de una cuchilla de corte. Preste atención a la Hearing protection protects your ears from cuchilla de corte todo el tiempo hasta haber terminado el corte. the noise of the shop. Close-fitting work Cualquier distracción mirando televisión, escuchando la radio gloves, when appropriate, can protect your o hablando con un compañero de trabajo o con un cliente puede hands when handling materials. hacer que pierda un dedo o una mano. Mantenga las manos Use safe work practices when woodworking. Think first before you place alejadas de las cuchillas u otras partes en movimiento usando un palo u otra guía your materials or your hands near the cutting blade. Pay attention to the cutting para empujar el material hacia el área de corte. blade the entire time until your cut is completed. A distraction while watching Siempre saque los clavos, nudos u otras imperfecciones que puedan television, listening to the radio, or talking to a coworker or customer can lead hacer que el material se atore o “rebote”. Sujete los materiales a la mesa de to a lost finger or hand. Keep your hands away from the blade or moving parts corte para evitar que el material y/o la cuchilla se deslicen cuando usted le by using push sticks or other guides to move materials into the cutting area. aplique presión. Si la sierra u otra herramienta se resiste al cortar, no fuerce el Always remove nails, burls, or other imperfections and additives that could material. Pare e investigue el problema. Siempre espere a que la herramienta o cause the materials to jam or “kick-back.” Secure your materials to the work cuchilla pare por completo antes de tocarla. Apague la máquina por completo, surface to avoid having the material and/or the cutting blade slip when you apply bloquéela y etiquétela antes de eliminar cualquier material atorado o antes de pressure to it. If your saw or other machine is resisting the cut, don’t force the limpiar la máquina. Nunca deje una herramienta motorizada de corte en marcha material through. Stop and investigate the problem. Always give the power tool y desatendida. time to run down and the blade to completely stop before you try to handle it. Mantenga su taller de carpintería seguro contra resbalones y tropiezos con Turn the power off completely and lockout-tagout before you clear a jam or clean un buen orden y aseo. Asegúrese de que los cordones eléctricos estén enrollados a machine. Never leave power cutting equipment running while unattended. ordenadamente y fuera de los pasillos. Mantenga el área de trabajo limpia y Keep your woodworking shop a safe place from slips and bumps with good ordenada. Limpie los derrames de inmediato. Mantenga el aserrín bajo control housekeeping. Make sure that power cords are coiled neatly and out of pathways. limpiándolo con regularidad a lo largo del día. Keep your work area clean and clutter-free. Clean up spills immediately. Keep Use una postura neutral y evite alcanzar demasiado lejos, así como otras sawdust to a minimum by cleaning regularly through the day. posiciones incómodas para evitar lesiones ergonómicas. Alterne las tareas a lo Use neutral postures and avoid awkward reaches or positions to avoid largo del día y tome descansos frecuentes para dejar descansar a su cuerpo. Si es ergonomic injuries. Rotate your tasks throughout the day and take frequent necesario, use guantes contra la vibración para prevenir el síndrome de vibración rest breaks to give your body a rest. If necessary, wear anti-vibration gloves to en manos y brazos (HAVS, por sus siglas en inglés). prevent hand-arm vibration syndrome (HAVS). The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #28
Adverti$er
Don’t Forget! You Saw it in the
Used Equipment Wanted!
765-751-9990
Omni Miser Saw Alpine AutoMill RS/SC/HP Saws Pacific Automation Auto Press 14 LT of 14 RT Ink Jet Printer for MiTek Cyber Saw or Auto Omni Saw Planx Ready Tables Triad “Diamond Quad” Framing Tables Triad Wall Panel Lift Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Pacific Automation Raised Track Gantry Systems Planx or Wizard Jigging Systems Virtek Laser Projection Systems Field Repair Press Portable Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16
Toll Free: 800-382-0329 www.wasserman-associates.com
Take Back Your Business Become More Competitive with:
Powerful Software High Quality Connector Plates Independent Established Supplier
All at a Great Price
For a software demonstration call 1-800-652-6050 www.keymark.com
Join the Southern Pine Partnership! Since 1915
As a member, your ideas help formulate programs and activities that benefit not only your company but the wellbeing of the entire industry 2900 Indiana Ave. Kenner, LA. 70065 504/443-4464 sfpa.org southernpine.com mail@sfpa.org
JobLine.com
The
, inc.
800-289-JOBS(5627)
Time to Hire? Affordable
Recruiting & Testing www.thejobline.com PHONE: 800-289-5627
This Space is Available Call 800-289-5627 x1 or email
info@componentadvertiser.com
Since 1992 Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #29
Adverti$er
Don’t Forget! You Saw it in the
Business Listings
JobLine.com, inc.
The
800-289-JOBS Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers
www.componentrunner.com 314.374.7400 CDean@ComponentRunner.com Wood Roof & Floor Trusses Wall Panels Engineered Components Gould Design, Inc. Designing to your needs... A. One Gould project at -a time. Christopher President
CAD Design
Time To Hire? We’re here when you need help!
www.thejobline.com
Designing to your needs... One project at a time
Reasons to consider utilizing GDI’s Design Services Design is custom fit to your individual standards
Mylon Stark
Your Ad Could be Here
Industry Leading Professionals at your fingertips
2”x3” Single Card
Overall design department cost reduced, saving you $$$
$195 per YEAR!
Experienced with multiple industry design software suites
Sizes & Rates on-line
Up to date with US & Canadian Building Codes
www.componentadvertiser.com
(772) 475-3583 - Call Today
or call 800-289-5627 x 1
cgould@goulddesigninc.com | www.goulddesigninc.com
Professional Services Anywhere, Anytime Invest In Your People! Here's a partial list of services BPS will provide to your operations:
• • • • • •
Improve Your Net Profit !
• •
Time Standards
(R.E., S.U. & Man-Minutes also known as Houlihan Method)
Proper Production Efficiencies, Pricing , Scheduling
Supervisor & Leadership Development Safety Integration Development of Safety Committees Developing Personal Responsibility for Operational Success Workplace Safety & Health Training for "Best Practice" Application OSHA and MSHA-related Training and Education Jobsite and Facility Audits and Inspections Incident Investigations
888.519.4130 toll-free
Lean Manufacturing Practices All Areas Are Covered 50% Shop - 50% Office Manufacturing, Design,
Admin Practices
Sales and
Tailored for Your Company
605.220.2342 mobile
info@bigpicturesafety.com www.bigpicturesafety.com
Truss Shop Labor Tracking Software Easy to use Software Track Your Labor Efficiencies and Labor Cost
Todd Drummond Consulting, LLC www.todd-drummond.com
todd@todd-drummond.com
Phone 603-763-8857
20 Years in Truss Industry - 9th Year in Consulting Service - 50+ Clients
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
Your Ad Could be Here 2”x3” or 3”x2” Single Card
$195 per YEAR! 3”x4” Double Card
$295 per YEAR! Sizes & Rates on-line www.componentadvertiser.com
or call 800-289-5627 x 1 FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
June 22nd, 2012 #05147 Page #30
Adverti$er
Don’t Forget! You Saw it in the
Reader Response Form FAX to: 800-524-4982
Reader Response Sponsors
or email: info@componentadvertiser.com Name: ____________________________________________________ Company: ______________________________________________ Address: ______________________________________________ Zip:______
City:____________________________ State:______
Wood Truss 765-751-9990 Systems inc.
Combining the qualities and expertise you should expect from an industry supplier MANUFACTURERS’ REPRESENTATIVES
www.woodtrusssystems.com
Phone: _________________________ Fax: ______________________ Email: ____________________________________________________ How would you like to be contacted? Phone Fax Check All that Apply Email
Would you like to be a Reader Response Form Sponsor?
List of Items you are interested in: List the Page # and Title of the item. Page # Item Title ____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
____
______________________________________________
Would you like to be added to our subscription list?
PHONE: 800-289-5627
Yes:
Call 800-289-5627 x 1 or Email info@componentadvertiser.com
No:
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
CSS Automated saw for fast, accurate production of timber components
The CSS automatically sets up for angles and lengths
The CSS will cut at least double the amount of a manual saw
Jobs are downloaded to the saw via LAN, Floppy or removable media
Set up left or right hand timber flow to meet your requirements
CSS PACKAGE INCLUDES:
10 ft (3 metre) roller infeed table
20ft (6 metre) outfeed automated bench table
CXM saw
Rockwell Automation
17 inch Industrial flat touch screen
Custom designed software
A: 31 ALLEN MILLS ROAD, ROTORUA, NEW ZEALAND 3010 P:+64 7 345 8088 F:+64 7 345 8087 W: WWW.SPIDA.CO.NZ