December 2014 Advertiser by Component Manufacturing Advertiser

184

PUBLISHED MONTHLY December 1st 2014

COMPONENT MANUFACTURING dverti$er

#07185

SERVING THE STRUCTURAL BUILDING COMPONENTS INDUSTRY Inside: Question of the Day: Madison’s Canadian Lumber Reporter: Layman’s Lumber Guide JobLine Hiring Zone: Available Jobs Available Candidates

page 3 page 13 page 19

page 320

Safety First Topics in English/Spanish:

page 31

New Equipment Directory: page 32 Business Directory: page 33W

Page 2

www.mitek-us.com/planxreview

Component Manufacturing Advertiser

December 1st, 2014

M ACdverti$er OMPONENT

ANUFACTURING

Published Monthly Editor/Publisher Thomas McAnally tmcanally@componentadvertiser.com

Advertising Thomas McAnally Position available

Subscriptions Renae McAnally

Distributed FREE via e-mail subscription or on line at www.componentadvertiser.com

Download FREE and subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources. Deadline is the 25th of each month.

Don’t Forget! YOU SAW IT IN THE

Adverti$er

December 1st, 2014 #07185 PAGE #3

Question of the Day By: Stan Sias

Scope of Work?

I had a frantic phone call this week from a Component Manufacturer regarding hurricane ties…really big hurricane ties! After answering their question, I posed one of my own, that being “If you are being asked to assume this additional risk in specifying the truss to wall connections on this (very large) multi-family project, who is checking the load path through to the foundation on these three-story structures?”

Stan Sias - National Manager Plated Truss Industry at Simpson Strong-Tie

This brings to light serious questions with regards to the Component Manufacturer’s (CMs) assumed and actual scope of work (SOW). As I have stated many times before in this space, ANSI/TPI 1, Chapter 2 is very clear about the division and assignment of responsibilities with respect to the application of Trusses in the construction of a Building. Unless otherwise changed in the specific contract documents, the provisions of Chapter 2 should be adhered to. With regards to the connection between the roof truss and the bearing support, the IBC requires that there be a Continuous Load Path (Section 2304.9.6) and TPI 1 places the responsibility for the connection between the truss and the structure inside Section 2.3.2.4, Required Information in the Construction Documents, as shown below.

Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk Copyright 2008-2009-2010 -2011-20122013-2014

Component Advertiser PO Box 16685 Fernandina Beach, FL. 32035 NO REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION FROM THE COMPONENT ADVERTISER

eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com

Member PHONE: 800-289-5627

Although it may be with the best of intentions when you or your associates inadvertently expand your scope of work to ‘do your customer a favor’, it is all-to-often exposing you to an incredible increase in your risk. For starters, unless you have an engineer on staff, you may be (and probably are!) not acting in compliance with your State Engineering laws. You may also be acting outside of your insurance coverage and placing your attorney in a precarious position if he/she were called to defend or protect you. Further, do you or your staff have the expertise to accurately determine all of the loads acting on the truss-to-bearing connection? [A previous Question of the Day addressed the truss to bearing question in great detail.] Are you being compensated to do this work? Do you have the proper professional liability and errors and omissions insurance? Unless you do, and have a Registered Design Professional either on staff or on contract, you may be risking the entire store on this one ‘favor’. Sometimes Owners, Contractors and/or other that do not know or understand TPI 1 or our industry try and force you to assume these additional risks because they feel that you are closest to the product. It is wiser to take the time to educate them then it is to simply knuckle under. Because you may have done it in the past doesn’t mean it has to continue. Read the Contract Documents for each project very carefully and either strike any detrimental language or choose to pass. In any event, I would always make a reference to ANSI/TPI 1, Chapter 2 when placing a bid for a new project. Unless the contract documents specifically revise the Design Responsibilities Section, your industry has done a good job to protect your interest. If the contract documents do change the Design Responsibilities assumptions, you then have a business decision to make but as always, business decisions should be made in conjunction with your insurance and legal folks, not as an ill-advised ‘favor’. READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

Auto Eye Truss system

Fast Reliable Accurate

www.randek.com www.randek.com

Auto Eye Truss System is an automatic truss production system developed with speed, accuracy and reliability in mind. Read more about our products at randek.com

M ACdverti$er ANUFACTURING

SAWS

2007 Mitek Cyber A/T Component Saw •Fully Automated 5 Blade Component Saw •1-32”, 2-20” and 2-16” Blades cut 4x2 and 2x4 through 2x12 up to 20’ in length •Extra Set of Blades •Touch Screen Computer (has latest updates) •Matthews Ink Jet Printer •Outfeed Skatewheel Conveyor •Waste Conveyor (under saw, new belt) •Incline Waste Conveyor (adjacent to saw, looks rough) $129,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2004 TCT 1100 Linear Saw Series 1100 linear saw features 3 HP, 3 phase saw motor with 20" carbide tip blade, 3 axis motion control system utilizing magnet servo motors. Cuts chords and webs from 2x4, 2x6 material. Saw is left feed and includes a pc with touch screen, Matthews Jet-A-Mark DOD 2002A inkjet printer, with 20' in-feed and 10' Outfeed OEM supplied conveyor. 230V, 3 Ph, 20 Amp service. Price: $49,900 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

DePauw Combi-Cut Five head saw with powered angulation, Cuts from 1’-9” to 20’ at 90/90, Includes shaker pan waste conveyor, front-end cut off blade for quick web processing from varying length material. This saw has been well cared for throughout its service live including improved electrical components. Wired for 480v, 3Ph power. Price: $9,790 :: FOB MN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE SAWS

Adverti$er SAWS

2005 Monet Desauw B500 XEL Component Saw 2003 Omni Miser Saw 2005 Monet Desauw B500 XEL component •Automated Wood Processing System saw features semi-automatic user interface •Lengths to 16’ with backup mechanical indicators and •Ink Jet Print System A (One Face) includes grouped functions such as •Incline Live Deck automatic blade alignment for chords or •Bunk Feeder webs and automatic centerline adjustment •(5) 2x4 Magazines of nominal board size. Includes over travel •Installation & Training is available at protection, pneumatic blade brakes on additional cost all 5 blades, safety fencing, 600v to 480v $67,500 FOB MN transformer, shaker pan scrap system, Wasserman & Associates manuals, and all available hardware and 800-382-0329 spare parts. 18" minimum cut, 20' max. www.wasserman-associates.com Does not include incline scrap conveyor. 480 volt, 3 phase. Price: $71,990 $59,900 :: FOB ON Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 Alpine PF90 AutoMark System •Wall Panel Plate Cutting & Marking Saw •Touch Screen Interface •Automated Length Stop & Ink Jet Printer as directed by Design Software Output •Cuts & Marks Both Top & Bottom Plates Simultaneously •24’ Infeed and 16’ Outfeed Table •10 HP Motor with 20” Blade •240 Volt / 3 Phase $29,500 FOB FL Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Onmi Miser RT Roof truss only. Features A-print one face side, auto-deck material feed, spare 16” blade. Price new was $175,000. $78,990 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

R P ed r u ice ct io n

OMPONENT

2005 (12/05) Wyrks Tool / Omega Double End Web Cutter 2005 (12/05) Wyrks Tool / Omega Double End Web Cutter / Model 12-05-J-260038 / Cuts 2x4, 4x2 & 2x3 Rounded End RT&FT Webs / Electric and Hydraulically Powered / 460 Volts 3 Phase / Bought New in 2005 for $70k. The rounded end web system that can replace up to 70% of conventional angle cut webs and they deliver equivalent performance. The system is a field proven manufacturing system that saves hours of cutting and assembly time, which can greatly reduce costs. It consists of the rounded Roof and Floor webs. Rounded webs are a fully tested alternative to conventional truss webs. Design procedures for both lumber design and plate connections are in full compliance with ANSI/TPI 1-2002 “National Design Standard for Metal Plate Connected Wood Truss Construction” NOW $4,800 FOB: GA Salter Associates 770-434-1006 www.salter.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

December 1st, 2014 #07185 PAGE #5 SAWS

2003 MiTek Cyber A/T Component Saw Fully automated five-blade component saw with Dell PC upgrade. Cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor in enclosure for fully automated or manual part input. All powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" @ 90/90 deg. (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode). Includes OEM belt scrap conveyor and (5) spare blades. 3 Ph, 220v/240vac, 60 htz, 175 Amp, 100 psi air required. Price: $89,990 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1986 Timbermill 6-20 Timbermill Mod.# MH6C-20, s/n Q0301, six blades cuts lumber from 2x4 through 2x12, 4x2 lengths from 12” to 20’ including four angle floor truss webs from 18”, all powered movements, 480v, 3Ph, includes chain-drag scrap conveyor with long incline, extra set of blades, well maintained, and currently in service. Price: $11,850 :: FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Alpine PF-90 Automark Plate Cutting/ Marking System Automated under-table saw with blade, non-functioning Matthews marking system, all system conveyor, and PC with environmental enclosure. 120VAC/3 Phase power required. Price: $18,890 :: FOB IN PENDING Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

CONNECTORS

INTEGRATED COMPONENT Systems

Look to Simpson Strong-Tie for your system solutions. Our growing product line is a direct result of listening to the needs of our customers and staying true to our core strengths of exceptional customer service, product innovation and testing, and manufacturing to the highest quality standards. ÂŠ 2014 Simpson Strong-Tie Company Inc. SBC14

LATERAL Systems

FASTENING Systems

Let us help you with your next job. Contact your local rep

at 999-5099and | www.strongtie.com (800) 999-5099 at (800) visit our website strongtie.com.

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Adverti$er

December 1st, 2014 #07185 PAGE #8 SAWS

800-382-0329 2004 Hundegger SC-1 Linear Saw Servo Driven Single Blade Linear Saw. Angle & Bevel Drive for Roof Truss, Floor Truss and Wall Panel Cutting. Process Lumber from 1/2” x 1 1/2” to 6 1/4” x 17 . 3/4” up to 26’ in Length. Automated Cutting with Software Download to Operator Console. Automated Infeed Conveyor & Table. Automated Clamping & Positioning System. Outfeed Table with Ink Jet Printer (Edge Printing). Currently in operation and available in December 2014. Optional Installation, Maintenance & Tech Support available from Hundegger $95,000 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2005 Alpine AutoMill SC Automated Component Saw •Servo controlled for fast set-ups, accuracy and system dianostics •23 Axes of Automation •Ink Jet Printer •1-20” Blade, 3-18” Blades and 1-32” Blade set-up in 2 to 15 seconds •Incline Waste Conveyor •Excludes Live Deck and Outfeed Skate Conveyor

$120,000 NOW $110,000 FOB AB Direct Link: http://goo.gl/xaXNAw www.wasserman-associates.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

2006 Razer v4 Linear Saw Features hydraulic 5,000 rpm saw motor, full axis of motion to complete straight, single/ compound bevel, and rip (bevel rip capable) with 14” blade. Handles material up to 16’ in length, 14” in width, and up to 4” depth in either imperial (US) or metric dimensions (shortest cut piece is 3” delivered to front of the saw). Windows OS with color touchscreen interface allows an operator to cut up to 200+ parts per hour, 2nd generation v4 saw with 5-sensor re-referencing feature for enhanced accuracy. Includes OEM supplied in-feed and out-feed conveyor. Well maintained including new C-Axis motor July ’14. 480v, 3Ph power, requires 100 psi air supply. $89,880 FOB IL. See video here: http://goo.gl/Hxns5A Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

SAWS

Adverti$er

December 1st, 2014 #07185 PAGE #9

SAWS

800-382-0329 2000 MiTek Cyber Saw Frame #151, Fully automated five-blade component saw. Cutting performed by (2)-16" X 6HP, (2)-20" X 6HP, (1)-32" X 12.5HP, all powered movements, cuts 2x3 thru 2x12. Lengths cut from 2 to 20 feet. Includes scrap conveyor (no incline) and outfeed skatewheel stand. 240V/60Hz/3ph. Missing saw #3 and #5 motors. $16,490 FOB TX. Wood Truss Systems 765-751-9990

Tell Them You Saw it in the M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

2013 Apollo Radial-Arm Saw WITH Mango Automation Automated centerpoint saw, direct-drive 5.0 h.p. 230/460v, 3ph (208v - 575v) power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37” cuts with an 18” carbide-tip blade. Featured price includes integrated Mango length automation and roof truss software (compatible with all truss/wall-design software), 17" LCD touch screen display, 30' of gravity conveyor, full OEM warranty, and 12 months of phone and virtual tech support, two-day, on-site installation and training. Apollo saw features, HD steel frame with powder-coat finish, and noncorrosive exposed materials (zinc-plate, bronze, aluminum), Blade-stroke limiter, see-through Plexiglas shield, and laser cutting guide now standard for maximum operator safety and minimal regulatory hassle! Add $1,500 for wall marking hardware/software option. $38,700 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

SEMMLER SYSTEMS INC. ONE STOP SHOP COLUMN FABRICATING EQUIPMENT

2006 Omni Miser Saw

BIG RED III *Total system inline equipment - mobile nailing bridge, joint gusset press, planer, conveyer, bunk banding station/floor track * Contains 10,000 nails, fabricates 140 columns without reloading x Fabricates 3 ply, 4 ply,2x6 and 2x8 columns up to 32’0” * Special equipment inline design requires only one operator * Column engineering and desip manual available * Finger Jointer & stacker equipment options Semmler Systems Inc. 605’787-4765 cell 605-391-9373 www.semmlerinc.com Email: jimsemmler1@msn.com PHONE: 800-289-5627

• • • • • • • • •

Automated Wood Processing System Model RTWF (Roof Truss & Wall Frame Components) 5 HP Motor with 16" Blade Cuts 2x3, 2x4, 2x6, 2x8, 2x10 & 2x12 up to 16' in length Crooked Lumber Sensor Print System D (Both Faces & One Edge) Auto Deck (Live Deck) Available Septemeber 1, 2014 Installation & Training is available at additional cost.

$115,000 FOB WA www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

SAWS

2005 Omni Mini-Miser Saw •Omni Mini-Miser Saw •5 HP Motor with 14” Blade •Ink Jet Printing System •Incline Live Deck •Bulk Feeder •Five(5) Magazines $34,500 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE

SAWS

2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $59,900 FOB AB NOW $49,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er

SAWS

MiTek Combi Set Web Saw •Four Blades Cut Lengths from 2' to 16' •Waste & Incline Conveyor •Extra Set of Blades •220/440 Volt - 3 Phase $13,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

December 1st, 2014 #07185 PAGE #10

SAWS

Holtec Transcut Portable Crosscut Saw •20 HP Kohler Gasoline Engine •Cutting Capacity: 48" x 48" •Chain Oiler •Guide Bar with Chain Tensioner •Kickback Safety Bar •Squaring Frame $5,250 FOB NV Wasserman & Associates 800-382-0329 www.wasserman-associates.com

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

SAWS

Wood Truss Systems

inc.

g in d en 2003 Spida Automated Truss Saw Automated Stop & Automated Saw Rotation as directed by Truss Software. Computer, Micro Touch Enabled Monitor & Keyboard with Enclosure & Stand. 20’ Outfeed Table & 10’ Infeed Roller Conveyor with Stands. $$11,500 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er

December 1st, 2014 #07185 PAGE #11

MANUFACTURERS’ REPRESENTATIVES

Late 2007 Alpine X4 Linear Saw Only Touch Screen Control Panel. 5 Axes of Automation. 15 HP Motor with 22” Blade •Ink Jet Printer. EXCLUDES Auto Feeder (Live Deck). EXCLUDES 2 Outfeed Conveyors for Sorting. EXCLUDES Incline Waste Conveyor. Installed January 2008, Out of Service March 2010. $19,500 FOB IA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2012 Monet DeRobo Linear Saw

800-382-0329

NEW! Miter Saw with NEW Mango Plate Marker 12" Sliding Miter Saw, Automated 20' Length Stop & Plate Positioner as directed by Design Software Output, 17" Touch Screen Computer, MangoTech Wall Panel Cutting & Marking Software, 30' of Roller Conveyor with Stands, 12 Month Phone & Virtual Tech Support, 2 Day Onsite Training & Installation. Excludes: Dust Collector & Saw Stand.

$27,500

www.wasserman-associates.com PHONE: 800-289-5627

DeRobo linear saw by Monet organizes "fill" boards to increase optimization of each board, can produce unlimited scarf cuts, cuts 1 or 2 boards at a time and cuts webs, chords, wedges, rafters and openstair stringers. Works with all major connector plate manufacturer's software. Features include 22 inch blade, touch-screen display, right-to-left feed direction, lumber push and pull grippers for more accuracy, ink marking on edge (1.5” Dimension) on the in-feed side, standard OEM in-feed and out feed decks, small piece delivery to the front of the saw for easy access, includes waste conveyor and incline. 440 volt, 3 phase power.

$108,890 $98,980 NOW $89,890 FOB AB

765-751-9990 www.woodtrusssystems.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

BIDDING CLOSES Thursday December 4

ALL TRUSS BUILDING SYSTEMS

167 Sentry Drive /CPUĹżGNF 6:

Beginning at 10 AM Preview: Tuesday, December 2, 9 AM-4 PM

WOOD TRUSS MANUFACTURER

(2) BIG FOOT TRUSS MACHINES

5â&#x20AC;&#x2122; X 100â&#x20AC;&#x2122; TRUSS SYSTEM

SPYDER COMPONENT CUTTER

HYSTER FORKLIFTS

TRUSS MACHINES

FORKLIFTS

Ĺ&#x2013; .KPM 9QQF .KPGU $KI (QQV /FN Ĺ? Z #RRTQZ Ĺ? Table Ĺ&#x2013; %NGCT[ 6TWUU 5CY 5[UVGO %TCHVUOCUVGT /FN $NCFG Ĺ&#x2013; .KPM 9QQF 6TWUU 5CY 5[UVGO 5R[FGT # 2 %QORQPGPV %WVVGT /FN $NCFG Ĺ&#x2013; Ĺ? Z Ĺ? 6TWUU 5[UVGO Ĺ&#x2013; Ĺ? Z 6TWUU 5[UVGO Ĺ&#x2013; )CPI 0CKN 2TGUUGU

Ĺ&#x2013; *[UVGT 5 :. .2) .$ Ĺ&#x2019; .KHV *GKIJV Ĺ&#x2013; *[UVGT 5 ' .2) .$ Ĺ&#x2019; .KHV *GKIJV

(972) 248-2266 (972) 248-6887-F 2323 Langford St., Dallas, TX 75208 Michael Rosen TX Lic. #6732

SHOP EQUIPMENT Ĺ&#x2013; 4CFKCN #TO 5CYU Ĺ&#x2013; * (TCOG 5JQR 2TGUU Ĺ&#x2013; 4QNN +P 8GTVKECN $CPF 5CY Ĺ&#x2013; /KNNGT 9GNFGTU

INCLUDING Ĺ&#x2013; #KT %QORTGUUQTU Ĺ&#x2013; *QRRGTU Ĺ&#x2013; 2CNNGVU ,CEMU Ĺ&#x2013; %CTVU Ĺ&#x2013; (CPU Ĺ&#x2013; 5CYU Ĺ&#x2013; /WEJ /QTG

www.RosenSystems.com info@rosensysems.com 15% Buyerâ&#x20AC;&#x2122;s Premium will apply. See our website for complete terms & decriptions

M ACdverti$er OMPONENT

ANUFACTURING

December 1st, 2014 #07185 PAGE #13

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Updates on the solid wood market in Canada and the US provided by Keta Kosman, publisher and editor of Madison’s Lumber Reporter. Madison’s is a North American lumber and panel commodity price guide and market analysis newsletter, which has been published every Friday out of Vancouver, BC since 1952. For more information please visit http://www.madisonsreport.com

MADISON’S MONTHLY LUMBER MARKET UPDATE AND OVERVIEW

customers simply refused to budge on discounted counter-offers.

The relentless onset of winter conditions at the end of November did nothing to bolster US and Canadian lumber and panel sales, despite the annual North American Wholesale November 26, 2014 Lumbermen’s Association meeting being held in Chicago, IL, Provided by: Madison’s Lumber Reporter in mid-November. Prices on almost all standard construction www.madisonsreport.com framing commodities remained flat as severe weather hit Western Spruce-Pine-Fir dimension lumber traders in British Columbia important markets in the US northeast. reported an uptick in buying from customers in China mid-month. Export Terrible storms in the US northeast put an absolute stall to volumes of Canadian wood to that populous country have been extremely stable all activity, whether hauling, production, or building. Lumber so far in 2014 compared to last year, even as buyers there have been somewhat traders could do nothing but hunker down until the epic snows dormant. Suppliers are watching carefully for any increase in demand from melt, along with everyone else. China before the end of this year; a repeat of surging 4Q sales as happened in While solid wood traders reported slowing sales, reluctant 2011 and 2012 would be very welcome indeed. customers were — once again — forced to come to the table Otherwise, sales of almost all solid wood commodities continued strong to fill unavoidable holes in their inventory. Luckily for them, into the US. The year-long battle over a price floor seems to be mostly resolved; transportation posed no issues and both rail car and truck production and shipment volumes this year at Canadian and US sawmills are deliveries were timely. very stable compared to 2013. In some cases producers tried to drive up prices, Log supplies in mill yards at British Columbian and US pointing to consistently extended order files as the reason, while in other cases northwest sawmills were replenished during a couple of weeks of cold weather. The rains returned by the last week o f N o v e m b e r, turning remote logging roads once again to mush. Lumber manufacturers were unconcerned as they expect their current log decks to last through the end of this year.

MADISON'S LUMBER REPORTER KEY PRICES WEEK OF 11/21 To be published in this week's issue of Madison's Lumber Reporter: WSPF KD R/L 2x4 #2&Btr . . . WSPF KD R/L 2x6 #2&Btr . . . WSPF KD R/L 2x8 #2&Btr . . . WSPF KD R/L 2x10 #2&Btr . . . WSPF KD PET 2x4 Studs . . . Douglas Fir green #2&Btr 2x4 . . . Douglas Fir green #2&Btr 2x10 . . . ESPF KD 2x4 8ft Studs . . . . . . . OSB ON 7/16" (C$/1000 sq ft) . . . all prices FOB mill, US$ per thousand board feet *except OSB which is C$ per thousand square feet

$335 $345 $342 $363 $355 $305 $405 $405 $215

-4 -5 -8 -12 +0 -3 -5 -15 -15

Visit us on Slideshare!

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

http://goo.gl/gDeRsX

Keta Kosman - Publisher Madison's Lumber Reporter Madison's Timber Preview Madison's Investment Rx 604 319-2266 www.madisonsreport.com

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

www.todd-drummond.com

Adverti$er

todd@todd-drummond.com

December 1st, 2014 #07185 PAGE #14

(603) 763-8857

75+ Companies Completed 25+ Years in the Truss Industry 10+ Years in the Consultation Business Expert in reducing cost and improving productivity in all departments of wood truss and wall panel manufacturing. Normal gains for most clients are 3 to 6 points in net profit! √

Common-sense best practices garnered from over 75 consultations.

√

All proven methods with lean principles in mind.

√

Improvement in all areas such as manufacturing, design and sales.

√

Proven time standards (Man minutes) for truss manufacturing.

√

I do not make any fees, commissions or other income from any equipment or truss plate manufactures. My advice is unbiased.

√

Go beyond the typical truss plate and equipment vendor recommendations!

See website for testimonials and consultation service details: Testimonials of services: http://todd-drummond.com/todds-profile/ http://todd-drummond.com/todds-profile/ Consultation Brochure: http://todd-drummond.com/wp-content/uploads/2013/05/Consult_Brochure.pdf http://todd-drummond.com/wp-content/uploads/2013/05/Consult_Brochure.pdf PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

December 1st, 2014 #07185 PAGE #15

M ACdverti$er A Thinking of Selling your Company and Want to Maximize the Value? OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

dverti$er

Restructuring or Refinancing and Want to Minimize Your Cost of Capital? Expert Financial Advisory Firm Specializing in the Building Products and Component Manufacturing Industry. With deep contacts in both component manufacturing and the financial world, sellers can expect to have access to over 80 potential suitors. On a recent deal, this competitive approach earned a client far more than the current owners ever expected. If you are thinking of selling, or would like to figure out how to get the lowest cost of capital, call me and we'll get you the proper expertise on your side of the table to maximize value. TDC collaborates with a well-established, industry-focused financial advisory firm. This firm is extremely sophisticated and has a well-earned reputation for honesty and integrity that is already established within the building products and construction industry. If you're interested in any of the above, call me and I'll put you in touch with them.

Everything at your fingertips via tablet, smartphone or computer over the Internet.

Quick - Simple - Drop-Dead Easy to Use! Tracks the labor per each truss count off the build tables.

All info linked to each W.O…. √ Multiple schedules for all departments √ User-defined dependencies for schedules and tasks √ Automated reminders √ Any type of file such as prints √ Notes viewed by all √ Change order requests √ MS Outlook® e-mails And more to give your people more time to get things done!

Testimonial of Consultation Services Wallace Building Products Corp. John Tauriello – President Danbury, NH Wallace develops and manufactures panelized wood building components and installs turnkey frame packages for commercial, multi-family, and residential construction projects in the Northeast US. We initially engaged Todd to introduce and implement lean manufacturing methods that would help us streamline our manufacturing and business processes. He brought much more! Todd possesses analytical horsepower, particularly strong knowledge about component manufacturing equipment and current best practices in our industry. He emphasizes a common-sense approach with plenty of real-world applications. We have implemented several of Todd’s suggestions in our manufacturing processes and our business processes. In addition, he helped us plan and implement a relatively modest capital equipment investment that will help us dramatically increase our production capacity! Todd was well worth our investment in his consulting services. PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

2006 Pacific Automation Roof Truss Gantry with Planx & Virtek Lasers Pacific Automation, side-eject, roof truss production with eleven (11) 8’w X 14’t, J-Slot steel tables, zero-aisles (88’ build area). Each table is fitted with two (2) 6” I-Planx rails per table (21 Planx rails total, 42 total pucks) for automated jigging. Table hardware is integrated with a 2003 Virtek LPS-6R, five-head laser projection system with PC and enclosure integrated with the Planx automated pucks. Pressing is completed with two raised-rail (table-mounted) press heads: one Pacific Automation 14-RT roller gantry head, one Pacific Automation LT-14 hydraulic press head, (2) park stations, and side-eject, skatewheel table ejectors to power/idle out feed conveyor @ 4’ O.C. spacing. No (0) finish roller included. 575 volt, 3 phase electrical for gantry, dedicated 3-Ph power for i-Planx, 120 vac dedicated electrical for Virtek system (Over US$600k eqpt cost new). $334,490 FOB BC Wood Truss Systems 765-751-9990

M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Don’t Forget! YOU SAW IT IN THE

TRUSS EQUIPMENT

Rand 24" Finish Roller Press Rand finish roller press with 14'-6" throat x 24" diameter rolls, forward/reverse functions, (2) 5 HP motors, safety bars, 80 RIV chains and drive enclosures. 440 volt, 3 phase electrical. Price: $13,890 :: FOB NV Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2003 103' MiTek RoofGlider Gantry System MiTek Model 82700-601 14' X 103' sideeject, trackless system. Includes (13) 6'-4" X 14' slotted, 3/4" steel-top tables with ejectors, 2003 MiTek RoofGlider gantry head Model 82700-601 with riding platform, 2003 MiTek finish roller Model 68300, dual 9' park stations, (31) MiTek powered/ idle outfeed conveyors with (40) stands. System includes conveyor control panel, power supply line, festooned cable, and masts. Complete with all available system hardware (5 Bridge Plates, 5 ejector covers). 460v, 3ph. Price: $145,900 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er

December 1st, 2014 #07185 PAGE #16

TRUSS EQUIPMENT

2004 MiTek RailRider Floor Truss Gantry Side-eject trackless system builds from 9"24" X 40' truss with 7' X 54' OAL Table. System includes center air clamping rails with under table air cylinders, pop-up option, and, push button controls. Includes electrical s/o chord, and masts. 230v, 3ph power. Price: $44,990 :: FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Robbins Tracked Gantry Equipment Robbins track gantry equipment including (1) one roller gantry head with 24" diameter roll, (158) feet of rail with base plate, (3) slotted steel tables 5'-3" x 14' and (8) solid steel tables, 5' x 14'. Solid steel tables have drilled and tapped holes at 6" o/c spacing. Enough tables for 75' of working length. 480 volt, 3 phase. Price: $37,490 :: FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2006 CMF 102 Ft. Trackless Gantry Commercial Machinery Fabricators sideeject system consisting of (1) 24” CMF trackless-gantry, (13) Slotted steel top, 6'x14' tables (96' build area), (1) Klaisler TR214-24 final roller with twin gear-motor drives, with single park station, Transfer Roller to powered/idle outfeed conveyor, out side rollers (no stands) for conveyor including mounting bearings. Includes all system jigging-hardware, and all available spare parts if any. Price: $139,990 $134,850 :: FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Sanford Finish Roller Press with Idler Conveyors Sanford final roller press, 18" diameter x 12 foot throat, includes 5 HP motor, safety bars, (14) idler conveyors 11 foot long. 440 volt, 3 phase electrical. $4,890 $4,190 :: FOB KS Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

www.mitek-usa.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

Design your own custom roof truss gantry! Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990

Don’t Forget! YOU SAW IT IN THE

TRUSS EQUIPMENT

Refurbished 1997 CMF Tracked Gantry System 1997 side eject CMF tracked gantry system with 14’ by 93 ft. working length. Tables and finish roller press were refurbished in 2007. System features (13) plastic topped tables with slotted-steel bottom chords, (1) 24” CMF diameter gantry head, (1) CMF 24" finish roller press, (4) idler rollers, and all available receivers. 440 volt, 3 phase electrical. $43,890 :: FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er TRUSS EQUIPMENT

TRUSS EQUIPMENT

2004 MiTek 103' RoofGlider Gantry System MiTek Model 82700-601-460v 14' X 103' side-eject, trackless gantry system manufactured in December of 2004. Includes (13) 6'-4" X 14' slotted, 3/4" steel-top tables with ejectors, 2004 MiTek RoofGlider gantry head with riding platform, 2003 MiTek finish roller Model 68300, dual 9' park stations, (32) MiTek powered/idle outfeed conveyors with (46) stands, (11) motors, and control panel. power supply line with cable and masts. System includes all available system hardware (bridge plates (10), ejector covers (8), and limited pucks). 460v, 3ph. Price: $154,900 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Hydro-Air Beaver B80 Floor Truss Machine •Traveling Hydraulic Press with Push Button Controls •Platen Size: 20” x 70” •(10) Air Cylinders for Clamping •Overhead Plate Rack •Floor Truss Lengths to 39’-6” •Floor Truss Depths from 12” to 24” •480 Volt / 3 Phase $15,000 FOB AZ Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2007 Klaisler Tracked Gantry Head Klaisler Gantry with riding platform, 24" diameter roll, variable frequency drive and Sumitomo twin drives, Very low hours. 230/460v, 3 Ph. Price: $18,990 :: FOB SC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Square 1 Floor Truss Finish Press New 2014 Square 1 floor truss finish roller press, four-foot* wide x 3 1/2” tall throat. Use of this process speeds assembly and transports finish truss away from the production area, adds quality and peace of mind for your finished floor trusses. The unique “uni-body” construction creates a ridged machine that does a final press of the connector plates for complete embedment into lumber, saving wear on your floor assembly machine. 14” diameter rolls, 7 1/2 HP motor, 80# chain, 114 FPM speed, emergency shut-off bars, chain and sprocket guards, integrated brake. Available options include: *other roller widths, Heavy-Duty upgrade, gear motor drive, and soft start controls at an additional charge. 208, 240, 480 volt electrical. $15,750 FOB IN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

MiTek TK-8 Klincher 60' C-Clamp Systems MiTek TK-8, 20 ton C-clamp style press with 60’ working length floor-mounted jig filtering. Each system includes: support beam, manual trolley, counter balance arm with hydraulic reservoir. Three systems available. Price is per 60’ system. $6,900 each. FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

December 1st, 2014 #07185 PAGE #17

2007 MiTek Floor Truss Stacker Foor truss stacker. Stacks single, double, or triple high stacks, includes 10 idle/powered outfeed conveyors, with OEM control panel. 208v, 3 phase power. Price: $14,190 :: FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

CMF Tracked Gantry Tables Quantity of (4 3) 6' X 14' slotted, 3/4" steeltop tables with ejectors (some partial) and some rail for an extension of a roller gantry Klaisler Receiver Arms truss line. Tables also useful for Wall Panel (27) Klaisler Receiver Arms sub-components, roof-truss "junk" tables Date of Manufacture: 2005 & 2006 (jacks, valley-sets, etc.), metal fabrication Excellent Condition tables. Will sell individually. Price: $2,500 Reduced - $550 @ any quantity FOB GA ea. :: FOB NC Salter Associates Wood Truss Systems 770-434-1006 765-751-9990 www.salter.com www.woodtrusssystems.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Hydro-Air Mark-10 Mono-Press •Press Tonnage: 37.5 Tons •Platen Size: 10” x 18” •Lumber Size: 2x4 to 2x10 •Includes: Hydraulic Power Unit, Counterbalance Arm, Trolley & C-Clamp Press •Excludes: Overhead I-Beam, Electric Feed Rail & Pedestals (all available at additional cost) •480 Volt / 3 Phase $8,000 FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

TRUSS EQUIPMENT

Mitek 14' x 24" Diameter Finish Roller including 12 Truss Rollers. $11,250.00 Now $9,900 FOB MT. Wasserman & Associates 800-382-0329

2005 MiTek RailRider Floor Truss Machine Side-eject trackless system builds from 9"24" X 40' truss with 7' X 54' OAL Table. System includes center air clamping rails with under table air cylinders, pop-up option, optional overhead plate rack and riding platform, push button controls. Includes electrical s/o chord, masts and wire cable. 230v, 3ph power. Price: $49,990 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Don’t Forget! YOU SAW IT IN THE TRUSS EQUIPMENT

Table Guided Gantry System by Square 1 Manufacturing New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", undertable-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase. Price: $(Based on required configuration) :: FOB IN. Wood Truss Systems 765-751-9990

2006 Robbins Jack Table 6’x25’ vertical hydraulic press with plastic top table. Price: $13,890 :: FOB CA Wood Truss Systems 765-751-9990

Adverti$er TRUSS EQUIPMENT

WALL PANEL EQUIPMENT

Panels Plus Wall Panel Framer Wall panel assembly equipment for wood or steel wall panels, floor-panels, and related framing components. The base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 PE & E Floor Truss Gantry foot lengths, at a working height of 29 to PE & E kick-leg floor machine builds up to 32 inches. Design includes controls at each 34 foot maximum span floor truss, 12 inch end of table, squaring stops and pneumatic minimum truss depth, 24 inch maximum clamping for consistent wall panel quality. truss depth. Includes one head with 5 HP Frames 2x4 or 2 x 6 walls, with color-coded, electric over hydraulic drive motor, joy-stick steel stud locators at 16 and 24 inches O.C. control, operator stand, steel-top table with spacing. Includes pop-up skate wheels steel angle/air hose clamp system, electric for easy transfer of completed wall frame. s/o cord with wire cable/ pulleys, (2) masts Framing table can be configured to receive and all available jigging. 240 volt, 3 phase wall framing light bars, other options include custom buildable wall heights, electrical. $10,890 $7,890 :: FOB KS lengths and auto-indexing of optional 2 or Wasserman & Associates 3 tool carriages. 800-382-0329 Additionally from Panels Plus are sheathing www.wasserman-associates.com tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge. Rand Final Roller Press Squaring stations, sub-component tables, Rand finish roller press with 14' throat x 18" conveyors and panel lifts are also available. diameter rolls, forward/reverse functions, Price includes factory installation and (2) 5 HP motors, safety bars, 80 RIV chains training. 50 CFM at 120 psi air. 120 or 230 and drive enclosures. 220 volt, 3 phase volt, 1 phase electrical. electrical. Price: $8,900 :: FOB WA From $40,200 base price FOB MN. Wood Truss Systems Wood Truss Systems 765-751-9990 765-751-9990 www.woodtrusssystems.com www.woodtrusssystems.com

FitzGroup.com PHONE: 800-289-5627

December 1st, 2014 #07185 PAGE #18

RFitzgerald@FitzGroup.com

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

LUMBER MARKET INTELLIGENCE FRONT PAGE

The Softwood Framing Lumber Market Forecast & Trading Strategies Since 1985 Matt Layman, Publisher

Week #48

â&#x20AC;˘ FDP Trends...Lumber suggests that upside momentum will accelerate beginning the third week of December. OSB's forecast looks like we should expect a sideways trade into year end. â&#x20AC;˘ 6x10 Historicals...The most significant change over the coming six weeks is unchanged weeks becoming negative. Up weeks still dominate the totals and average price advances $17. â&#x20AC;˘ Sales/Production Ratios... Inventory has overly shifted to producers. Look out!

Monday

November 24, 2014

Too Little Too Early...For the last few weeks we have been anticipating that the flight to inventory liquidation would create an under bought condition with substantial back logs yet to be delivered to construction sites. Last week producers saw a significant increase in phone calls, both tire kicking and hole filling. Buyers have too little too early. The recent winter weather has not had a chilling affect on the majority of the nation's metro markets where the bulk of the building is occurring. Rural areas continue to be plagued by absence of jobs and economic recovery. Consequently, housing continues to boom in heavily populated areas closer to cities. Making the decision to build winter inventories is difficult for those neck-deep in snow and less than ankle-deep in the recovery. . Regardless of where you are, there is money to be made from making a winter investment in lumber. If covered storage space is available and finances provide for payment of increasing inventory for next spring, I suggest taking a position now. Market appreciation will outweigh year-end inventory taxes. Looking Forward...ml

Forecasted Decision Points (FDP's), Lumber Composite SPOT PRICE Composite 2x4's #2 SYP-E, SPF-W, Dry Hem Fir, Green Doug Fir. (Blue). FDP's (Vertical Red Lines), reversals or accelerations, since 01/99: 393 FDP'sâ&#x20AC;Ś340 turns within 1 week. 87% FDP Historical Accuracy. Green Shade=Highest Demand Weeks #10-25; Yellow Shade=Daylight Savings Weeks #10 Through Week #45; Red Shade = Lowest Demand Weeks #45-52.

! %! # ! %! # !

! % # ! % # ! % ! % # ! % # ! % ! % # ! % # ! %

Forecasted Decision Points (FDP's), Oriented Strand Board (OSB)

SPOT PRICE OSB. (Blue). FDP's (Vertical Red Lines), reversals or accelerations, since 01/99: 96 FDP'sâ&#x20AC;Ś83 turns within 1 week. 86% FDP Historical Accuracy Green Shade=Highest Demand Weeks #10-25; Yellow Shade=Daylight Savings Weeks #10 Through Week #45; Red Shade = Lowest Demand Weeks #45-52.

# " !

# "

! ! #! ! ! $! !! ! %! "! ! ! % # ! % # ! % ! % # ! % # ! % ! % # ! % # ! %

Lumber Market Intelligence...Matt Layman, Publisher 145 N. Main St., Cramerton, NC 28032 Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org Reprint or distribution is unlawful without permission. www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn Product dimensions referred to herein do not imply actual net sizes, rather are commonly used descriptions of the products.

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Wood Truss Systems

inc.

Adverti$er

December 1st, 2014 #07185 PAGE #20

2008/09 IBS Wall Panel System

MANUFACTURERS’ REPRESENTATIVES

Interior or exterior wall panel production tables 6’-4” through 12’-3” wall height capacity to 20’ maximum panel length. Includes 20’ Sub-Component lay-out tables with optional Auto Stops, and skatewheel lift-outs, and short conveyor to (1) 20’ long IBS framing table with tool dollies, and dual 20’ Light Bars, (1) 20’ long squaring/sheathing table with Auto Router bridge and rough-opening stitcher tool, (1) 20’ long squaring/sheathing station with single-tool Auto-Bridge featuring beam tilt, joy-stick control, and optional dual stitcher tools. (4) four sets of powered IBS chain-drag conveyors, (1) IBS four-tool subcomponent nailer with conveyor, (1) 24” diameter Lauderdale Super Chop, 10 HP, up-cut saw with 20’ Tiger-Stop and roller conveyor, with Miter Saw Pan. Plant Net (w/o fiber optic cable & card), (6 ) IBS Plant Net terminal enclosures with stands, Saw Trax Panel Saw Model 2064, Safety Speed Cut with stand and wheels, two panel lift, support frame, and hoist assemblies. 230/460 volt, 3 phase and 120VAC electrical. 120 PSI air.

$249,600 NOW 198,890 FOB BC

765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

WALL PANEL EQUIPMENT

Wright Panel Lift and Hoist Assembly (Bridge Crane Assembly) Wright lift and hoist assembly . Includes (2) 1.5 HP trolley motors, (4) 500 lb. capacity hoists, capacity (1) ton. Was used for transferring wall panels to 12 feet in height. Distance between the hoists is 13'-6" x 8'-0", the travel distance is 50 feet and the vertical travel distance is 15 feet. See video for demonstration. 220 volt, 3 phase electrical. Price: $9,990 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329

Carlson 9' x 16' Wall Panel Line •Framing Table with Stud Locators, Skatewheel Conveyor & Pneumatic Plate Clamping •Squaring Table with Router Bridge •Sheathing Table with 16 Tool Panel Bridge •Excludes Bostitch Nail Guns on Panel Bridge •Triad CN-4 Sub-Component Nailer $14,900 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627

Adverti$er

December 1st, 2014 #07185 PAGE #21

WALL PANEL EQUIPMENT

Basic Automation 12' x 16' Interior/Exterior Wall Panel Line Framing Table with Tool Dollies (No Nail Guns). Squaring Table with Multi-Tool Panel Bridge. Panel Bridge Mounts at 6" O.C. with 3" Bridge Shift. Top & Bottom Plate Stitchers on Panel Bridge. Laser Pointer on Panel Bridge. Includes (25) Senco Staple Guns. $9,900 FOB GA. Wasserman & Associates 800-382-0329

IBS Framing Table & Squaring Table FRAMING TABLE Wall Panel Lengths up to 16’ Powered Height Adjustment (3’-11”’ to 12’-3” wall heights) Tool Dollies Light Bars Stud Locators at 16” & 24” O.C. Pop-up Skatewheel Conveyor Auto Stops Excludes Plant Net Computer & Enclosure SQUARING TABLE Wall Panel Lengths up to 16’ Powered Height Adjustment (3’-11” to 12’3” wall heights) Manual Squaring Stops Excludes Plant Net Computer & Enclosure OPTIONS Add $1,250 for Used IBS Handle Bar Router Add $3,500 for IBS Component Tables with Pop-up Skatewheel Conveyor Add $360 for 1 Pair of 10’ Skatewheel Conveyor Available February 2015 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

www.panplus.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

Toll Free 800-382-0329 www.wasserman-associates.com

WizardPDS®

drop-in Channels™ Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.

Retro fit now - own it in 6 months!

Toll Free 800-382-0329 www.wasserman-associates.com

Used Truss & Wall Panel Equipment in Tennessee

$7,500 Alpine Kick-Leg Floor Truss Machine

Alpine 14' x 100' Roller Gantry System with Exiting Conveyor, Finish Roller & Outside Conveyor $ 40,000

Basic Automation Framing Table & Squaring Table with Panel Bridge $ 12,500

$148,000 Klaisler 14' x 50' End Eject Roller Gantry System with Wizard Automated Jigging

Haulin 36'-50' Stretch Roll-Off Trailer

$13,000 en

P g

$8,000 Klaisler RolSplicer

M ACdverti$er OMPONENT

ANUFACTURING

WALL PANEL EQUIPMENT

Wright Panel Lift and Hoist Assembly Wright lift and hoist assembly . Includes (2) 1.5 HP trolley motors, (4) 500 lb. capacity hoists, capacity (1) ton. Was used for transferring wall panels to 12 feet in height. Distance between the hoists is 13'6" x 8'-0", the travel distance is 50 feet and the vertical travel distance is 15 feet. See video for demonstration. 220 volt, 3 phase electrical. $9,900 FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

1998 Triad 10’x16’ Wall Panel Line Interior/Exterior Wall Panel Line. Triad GEN II 10' x 16' Framing Table with Tool Dollies. Triad GEN II 10' x 16' Squaring Table with Router Bridge. Triad GEN II 10' x 16' Sheathing Table with Panel Bridge & Top/Bottom Plate Fastening. 19 Paslode Staple Guns. Accumulation Roller Conveyor. Gantry Crane with Electric Hoist & Wall Panel Lift. Dismantled & Ready to Ship. $24,900 FOB IA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

December 1st, 2014 #07185 PAGE #24

Don’t Forget! YOU SAW IT IN THE WALL PANEL EQUIPMENT

Carlson Sub-Component Nailer Infeed/Outfeed Roller Conveyor. 3 Mounted Senco Nail Guns & 1 Loose Senco Nail Gun. $4,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2009 Panels Plus 12' x 16' Squaring Table with Panel Bridge •Wall Lengths to 16’ •Foot Pedal Powered Height Adjustment (8’ to 12’ Wall Heights) •Powered Panel Bridge with Auto Return •Panel Bridge Tool Spacing on 6” Centers with 3” Bridge Shift •Panel Bridge Stitchers for Fastening Top & Bottom Plates •Panel Bridge Tilt at Sheathing Seams •Excludes Nail/Staple Guns $49,900 FOB MN Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Adverti$er TRUCKS & TRAILERS

2006 A Nu Prospect 53' Step Deck Roll Off Trailer Price: $42,890 :: FOB WI NEW ITEM! Condition: Good Description: 53' step deck trailer with GVWR of 77,000 lbs. Top deck height is 64", bottom deck height is 40". Unique "convertable" desigh allows for wall panel / building supplies / roof trusses to ship on one trailer or for long roof-trusses when hydraulic deck is lifted. Features split, locking rollers, right-side outrigger rollers for wide loads, hydraulic lift neck, LED lighting, straps to D-rings, and anti-lock brakes. Tires are good 70+ tread Trailer is currently in use, well maintained, and has current DOT inspection. $42,890 NOW 39,890 :: FOB WI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

TRUCKS & TRAILERS

1994 36' OK Gooseneck Mfg. Trailer 1994 Oklahoma Gooseneck Manufacturing, 36' tandem axle gooseneck trailer with electric drum brakes, indicator lights, and 13/32 to 13/64 tread depth, integrated, manual "landing-gear". 20,000 lbs. load rating.Price: $4,890 :: FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

JobLine.com, inc.

The

800-289-JOBS

Time To Hire? We’re here when you need help! visit: www.thejobline.com

2000 Prentice Telestik-33 Material Handler 32’-10” Boom. 4,000 Lb Payload. Excludes Truck. $10,000 FOB GA. Wasserman & Associates 800-382-0329

email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!

www.mitek-usa.com PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

Toll Free 800-382-0329 www.wasserman-associates.com

NEW Monet DeSauw 12’ x 16’ Framing Table with Programmable Single Tool Panel Bridge

$59,000 FOB MO Includes Installation Support in the United States & Canada

• Stud Locators at 16" & 24" O.C. OPTIONS • Pop-up Skatewheel Conveyor • Add $1,750 for Handle Bar • Powered Height Adjustment (8' Router • Add $1,250 for Wall Panel Lift to 12' wall heights) (Excluding Hoist) • Adjustable Squaring Stops • Add $1,500 for 1 Pair of 15' • Excludes Tool Dollies ® Skatewheel Conveyor with PANEL BRIDGE Stands ™ drop-in Channels • Programmable Fastener Patterns• Add $3,750® for Sub-Component Old technology turned state-of-the-art with WizardPDS drop-in Channels™ with PLC Touch Pad Entry Layup Tables Your table + our technology = Zero Set up time and NO manual jigging. • Click on Photo 7 for Video

WizardPDS

the Video Here Retro fit nowWatch - own it in 6 months!

http://www.wasserman-associates.com/images/Item_Photos/MDProgrammableBridge1.MOV?PHPSESSID=76ucbqov4862721kdv69qn7hd6

M ACdverti$er OMPONENT

ANUFACTURING

Donâ&#x20AC;&#x2122;t Forget! YOU SAW IT IN THE

Adverti$er TRUCKS & TRAILERS

December 1st, 2014 #07185 PAGE #26 MISC.

New Website Offers Mobile Friendly Interface! The website includes a product explorer which will allow you to search for specific equipment from the over 150 new & used products available. The listings will be comprehensive with great detail, many photos and an occasional video. Our goal is to provide the best resource in the industry for making profitable equipment selections for your company.

Load Lifter T-40 Yard Carrier â&#x20AC;˘The T-40 Modular Yard Carrier can easily move a modular building off your production line to your staging area in minutes â&#x20AC;˘50,000 Lb Capacity â&#x20AC;˘70' Main Rail Length (78'-6" Overall Length) â&#x20AC;˘20" Vertical Lift â&#x20AC;˘18 HP Gas Engine Power Unit for All Hydraulics â&#x20AC;˘Rear Lift: Six 5 x 20 Cylinders â&#x20AC;˘Pintle Hitch Coupler â&#x20AC;˘Running Gear: Six 20,000 Lb Heavy Duty Agricultural Spindles & Hubs FOB NE:: $19,500. Wasserman & Associates 800-382-0329 www.wassermanassociates.com

2007 Hydrovane HV15 Rotary Air Compressor with Sullair SR75 Refrigerated Air Dryer 77 CFM, -20 HP / 230 Volt / 3 Phase, Manchester 200 Gallon Vertical Tank. $7,750 FOB LA. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

www.wasserman-associates.com NOBODYâ&#x20AC;&#x2122;S BETTER EQUIPPED

to help you

BE BETTER EQUIPPED TOO. Making sure you have the right equipment for your needs is something weâ&#x20AC;&#x2122;ve been doing GPS OFBSMZ ZFBST 8F IBWF UIF FYQFSJFODF JOEVTUSZ DPOUBDUT BOE CSPBE TDPQF UIJOLJOH UP IFMQ ZPV CF NPSF QSPEVDUJWF NPSF FĂłDJFOU and more profitable.

1993 ASI 40' Roll-Off Trailer Sliding Single Axle. No Hydraulic Neck. Spring Suspension. Air Brakes. Tires & Brakes are 80%. Roller Locks. $9,900 FOB WI. Wasserman & Associates 800-382-0329 www.wasserman-associates.com READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

www.WoodTrussSystems.com XXX 8PPE5SVTT4ZTUFNT DPN t

PHONE: 800-289-5627

2014 Precision Equipment Roll-Off Trailers 40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System. Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extenda-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System. Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $52,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Invicta DGI-40 16" Single Surface Planer (Used) â&#x20AC;˘15 3/4â&#x20AC;? x 8 1/2â&#x20AC;? Capacity â&#x20AC;˘25 & 46 FPM Feed Speeds â&#x20AC;˘5,000 RPM Cutterhead Speed â&#x20AC;˘7 1/2 HP Motor â&#x20AC;˘230 Volt / 3 Phase â&#x20AC;˘Powered Raise & Lower of Table $4,000 FOB WA Wasserman & Associates 800-382-0329 www.wassermanassociates.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

MISC.

New SL Laser Projection System New, laser projection system from SL Laser. Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights). Includes system computer, cables, mounting hardware for attachment to customer's structure, factory installation, training and choice of green or red laser. Works with each connector plate manufacturer's design software. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

IBS Sub-Component Nailer •Clamps lumber up to 15” wide x 13” high •All clamping positions are adjustable •Can nail headers from both sides •End stop assures pieces are flush •120 Volt / 1 Phase •Includes Infeed/Outfeed Roller Conveyor (not seen in photos) •Includes Bostitch Nail Guns with Extended Magazines $5,900 FOB AB Wasserman & Associates 800-382-0329 www.wassermanassociates.com

M ACdverti$er OMPONENT

ANUFACTURING

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE MISC.

2005 Atlas Copco GA18 Rotary Screw Compressor Atlas Copco, model GA18, 25 HP rotary screw compressor with integrated air dryer and tank. Unit features oil injected lubrication, air cooled, digital display, 3,600 RPM motor, free air 99 CFM and maximum final pressure 132 PSI. 480 volt, 3 phase electrical. Price: $7,990 :: FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Pacific Automation Infeed Deck Pacific Automation 5-arm indeed deck, 15’ x 22’ footprint, features 5 HP gear motor, heavy-duty chains, tubular steel construction, sealed bearings, and foot pedal controls. 26" high, weight 7,000 lbs. 440 volt, 3 phase electrical. $4,900 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Adverti$er MISC.

2009 EnDiSys / Graco Foam Insulation System EnDiSys Model 3004240B. Skid Mounted Graco Reactor H-25 Hydraulic, Heated, Plural Component Proportioner. Maximum Flow Rate: 22 Lb/Min. Maximum Fluid Working Pressure: 2,000 PSI. Reactor Portable Dispense System (Manual Contol). 230 Volt / 3 Phase. Two 100 Gallon Heated Tanks. Drum Agitators (Both Sides). Feed Pumps. Recirculation System for Hose and Reactor. 150’ Heated Hose with 10’ Whip. Out of Service (Stored Inside). $19,500 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com

Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt). •Pressure Pump & Vessel. •Lightly Used. •Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Palatek 25 HP Rotary Screw Air Compressor with Atlas Copco Air Dryer -Palatek Model 25D4 Air Compressor Cross Manufacturing Lumber Splicer -25 HP Motor (230/460 Volt-3 Phase) Custom manufactured 7.5 HP hydraulic -95 CFM at 125 PSI lumber splicer with maximum plate size of -13,111 Hours on Air Compressor 10" x 11". Dual hand controls and reservoir.. -2007 Atlas Copco Model FX Refrigerated 208/240/460 volt, 3 phase power. $4,890 :: Air Dryer (115 Volt-1 Phase) FOB TN. -Air Storage Tank Wood Truss Systems $6,000 FOB KS. 765-751-9990 Wasserman & Associates www.woodtrusssystems.com 800-382-0329 READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

December 1st, 2014 #07185 PAGE #27 MISC.

2008 OMGA Finger Jointing Line Price: $29,900 :: FOB CO Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, OMGA INK F-100 glue station, and TITEN finish planer of unknown age, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

2008 AeroGo Load Beams Air Caster Load Beams (for moving modular home sections). Two Aero-Caster Load Modules connected by an Adjustable Telescopic Tube. Lightly Used (Once or Twice). Capacity: 7 Ton Each. 36 Load Beams Available. $50,000 for all or $1,700 each. FOB AL. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Hain 20' Powered Measuring System •Adapts to Any Saw •Left or Right Hand Operation •Feet & Inches System (Stops at 12” Centers) or Inches System (Stops at 10” Centers) •Motor: 1/4 HP Linear Actuator (110 Volt) •Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion •Stops: Jig Bored Steel •Stop Blocks: Machine Billet Aluminum •Optional Lengths from 5’ to 60’ •Optional Gang Stop •Add $770.00 per 10’ Section of Heavt Duty Roller Conveyor with Stands Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

FOR SOME GUYS, IT’S FAST CARS. FOR OTHERS, IT’S BEAUTIFUL WOMEN. FOR US, IT’S LASER-GUIDED LUMBER RETRIEVAL.

Our WoodRunner™ lumber retrieval system not only reduces labor by a half over manual saw feeding, it increases productivity by 30%. And, it’s compatible with any new or existing linear saw. Now, who wouldn’t be a little passionate about all that? Visitwww.apexmw.com www.apexmw.com or call 507-322-3700 to learn more today.

Page 28

Component Manufacturing Advertiser

December 1st, 2014

M ACdverti$er OMPONENT

ANUFACTURING

MISC.

Don’t Forget! YOU SAW IT IN THE MISC.

Adverti$er Door & Stair

December 1st, 2014 #07185 PAGE #29 Door & Stair

Wood Truss Systems

inc.

MANUFACTURERS’ REPRESENTATIVES

Refurbished 2005 Hain 20Ft. Measuring System 2005 Hain power head 1/4 HP electrical unit with new steel rails, pusher and stops, 20 foot long from OEM, measures lengths in feet, inches and fractions of an inch. The Hain MEA is a consistent way to measure your product, can adapt to any saw, allows left or right hand operation. OEM can custom build the unit to length up to 20 feet. 110 volt electrical. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.

$22,677 FOB FL | AS NEW

765-751-9990 2010 Polar Air Rotary Screw Compressor, Dryer & Tank 20 HP rotary screw compressor with refrigerated dryer and 120 gallon storage tank included. 208/230v power. Price: $8,490 :: FOB NB Wood Truss Systems 765-751-9990 www.woodtrusssystems.com

New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $14,250. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627

www.woodtrusssystems.com Door & Stair

Norfield Magnum Door & Jamb Machine •Door Sizing/Beveling •Lock & Latch Drilling •Hinge Butt Routing in the Door & Jamb •Faceplate Routing up to 1 1/8” x 2 3/4” •Air Predrill & Air Screwdriver •Width: Doors to 4-0, Jambs to 10 1/2” •Height: Doors to 8-0, Jambs to 8-0 •Thickness: Doors to 1 3/4”, Jambs to 1 1/8” •Butt Sizes to 5” x 5” •Butt Spacing: Infinitely Variable •Lock Backsets from 2 3/8” to 5” •230 Volt / 3 Phase $8,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2003 Triad Smart Stair Router System CNC (computer numeric controls), menudriven machine cuts 2x10 & 2x12 standard stair profiles w/touch screen controls. Two HD routers cut top or bottom stringer only, or both stringers simultaneously. Smart Stair Router accommodates standard stair profiles, no riser profiles, split stringers & open stringers with hardwood or softwood settings; cuts top or bottom stringers or both simultaneously. Features (2) HD 2 HP belt driven routers w/1/2" capacity collets, (2) stepper linear actuators for cutting profiles, (1) servo/stepper drive wheel for indexing, 628 lb. vertical clamp, 352 lb. horizontal clamp, industrial computer, and 4-axis motion controller. System includes 2260 Wedge & Glue Block Cutter to mix stacks of 1x and 2x materials in the same hopper. Cuts (2) wedges out of 1x material and (1) wedge out of 2x material w/walkaway hands-free operation. Capable of cutting glue blocks; bag-style dust-vacuum system included. Includes Triad stair assembly clamp for easy jigging of staircase assemblies. Accomodates up to 16 risers with a maximum width of 50". Price: $52,750 $47,750 :: FOB PA Wood Truss Systems 765-751-9990

BAM CNC Stair Router Saw Reman 03/08. Builders Automation Machinery [BAM] model CNC/MFSR stair router. Contemporary, box & open stairs, the only machine available that also cuts the top and bottom landings. Programmable with a large library already in the machine for most all box and open stringers. Remanufactured includes new wiring, rebuilt spindle motors, new drives & is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. One year warranty. Setup is free of labor charges we do charge airfare and per diem for setup and training. Portable 4 bag, 3 phase vacuum switched on at the machine controls is available for $1,568. Installation by the OEM available at an additional charge. 230 volt, 3 phase, 60 amp electrical requirements and 120 p.s.i. and 35 CFM air requirements. Price: $56,667 :: FOB FL Wood Truss Systems 765-751-9990

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

Norfield Vertical Door Loader -2,800 Lb Capacity -48" Stack Height -480 Volt / 3 Phase Location: TX Price: $7,900.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com

2002 Builders Automation Template Stair Router •Model RUWO 2000 MFSR •Cut Box and Open Stringers •Manual Setup with Auto Feed and Cut •One or Two Stringers per Cycle •10’ Infeed and 10’ Outfeed Roller Conveyor with Stands •2 Bag Dust Collector •(2) Lift Tables for Staircase Assembly •240 Volt / 3 Phase Price: $25,600 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com

Norfield Pro Door Machine with Door Cut-Off Saw Norfield Pro Door & Jamb Machine Width: Doors to 3-0, Jambs to 10 1/2” Height: Doors to 7-0, Jambs to 7-0 Thickness: Doors to 1 3/4”, Jambs to 1 1/8” Butt Sizes to 4” x 4” Butt Spacing: Infinitely Variable Lock Backsets from 2 3/8” to 5” 230 Volt/3 Phase/ 50 Amp and 230 Volt/1 Phase/20 Amps Norfield Model 3600 Door Cut-Off Saw Maximum Door Width: 4-0 Maximum Door Length: 9-0 Maximum Door Thickness: 2 1/4” Saw Blades: 2 at 8” 230 Volt/1 Phase/20 Amp/5.5 HP $6,900 FOB IN Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Production/Design/Location Manager Truss/EWP/Package Relocation: California Design and manage all truss operations. purchase all lumber and plates. Arrange payment and shipping. Troubleshoot every aspect including machinery. Implemented our OSHA safety plan and requirements. Print invoices and remove material from active inventory using peach tree software. Set up new customer accounts and validate credit references. Design wood and steel joists and headers. Assist customer project problems for the best economical and practical solution. Prior: Truss design and supervise. Purchase building material. Arrange billing and shipping from start to finish. From the small detached garage to the large apartment complex, I have done them all... Txt: C12276 to 406-210-1226 or call 800-289-5627 x1 Outside Sales/Management - Truss Relocation: Houston Texas Manage the daily function of my sales team, to insure the my team has the tools and the resources they need to reach goals set by the company and their individual goals as well. I have 3 outside sales personnel and 2 inside. Make routine trips to help the team close certain jobs. Work closely with our estimating department to make sure all quotes are handled in a timely manner and with the production team on delivery schedules. Txt: C12256 to 406-210-1226 or call 800-289-5627 x1 Designer/Estimator - Remote Location: Iowa or Remote Inside sales & estimating, blueprint reading, customer relations & service, product support, product & job management, problem solving, load transfer, mechanical & technical math, research & design, multitasking, detailing, technical writing, data entry, supply and material management. Software: MiTek, AutoCAD, Microsoft Office. Products: Roof & Floor Trusses, EWP, I-Joists, Beams. Prior WTCA III, Associates in CAD. Txt: C12253 to 406-210-1226 or call 800-289-5627 x1 Designer/Design Manager Truss/Panel/I-Joist/Stairs/EWP Relocation: Ohio 18 years Design experience with 3 as a Senior Designer. Primary duties: design, layout, and optimization. Secondary duties: checking others work and repairs. Software used: Robbins, Keymark, and AutoCAD. Component experience includes floor trusses, roof trusses, wall panels, I-Joists, and hardware. Market experience includes tract, single family, single family custom, multi-family, and agriculture. My volume was varied depending on projects. ID: C11856 PHONE: 800-289-5627

Don’t Forget! YOU SAW IT IN THE

Adverti$er

December 1st, 2014 #07185 PAGE #30

Hiring Zone - Available Candidates Remote Truss Designer - Multifamily Senior Designer - Truss/Panel/Packages Relocation: Colorado, Delaware, Florida, Relocation: California or Remote Design The .com, inc. Maryland, North Carolina, Virginia, As Truss Design Dept. Manager for Washington DC designers at multiple locations. Primary Overview: Well rounded candidate duties; Reporting to the plant manager, on who worked from a design job through top of managing a department of 13 to 15 supervision, to location management. people, which includes the administration Candidate is very technical, MiTek Sapphire duties for the department as well as training experience. Looking for an opportunity to newer designers, hiring, releasing, internal work remotely. policies and customer interaction in the Txt: C12044 to 406-210-1226 beginning and throughout to the end of the or call 800-289-5627 x1 project. Customer consultant and problem solver. Consultant to architects, engineers Truss Designer - Remote Designer - Truss. Primary duties: design, and local, state and federal jurisdictions. layout, optimization, and cutting/production documents. Secondary duties: checking As Senior Designer: Truss design and others work, scheduling, repairs, customer bidding for primarily commercial projects, service, inside sales, field measurements, layouts, manifests, delivery lists, shop s o f t w a r e m a i n t e n a n c e , n e t w o r k drawings, extensive customer contact, administration, training, and filling in for and field relations along with inventory. We’re here when you need help! the design manager as needed. Software Extensively worked with DSA for schools. visit: www.thejobline.com used: MiTek, TJ Expert, and AutoCAD. Formatted and wrote many of the programs email: mail@thejobline.com Component experience includes floor and forms that were used in the bidding and trusses, roof trusses, wall panels, I-Joists, design stages. Utilized the Uniform Building or call Thomas McAnally EWP, hardware, and lumber. Market Code in design practices. Extensive use of for Personalized Service experience includes tract, single family, AutoCad, MiTek, and many of the Microsoft STRICTLY CONFIDENTIAL! single family custom, multi-family, light software programs. Candidates seeking jobs: Txt: C12255 to 406-210-1226 commercial, and agriculture. My volume or call 800-289-5627 x1 was varied depending on projects, but I sold theJobLine.com, Inc. around 100k per month. Relocation: USA - ALL States The JobLine specializes in Txt: C12344 to 406-210-1226 recruiting and placing professionals or call 800-289-5627 x1 Truss Plant/Location/General Manager in the LBM, Engineered Wood Production/Design/Location Manager - Truss and Components Plant Manager with Truss/EWP/Package over 15 years of experience in the truss Products, Truss, Wall Panel, and industry who is looking to apply knowledge Modular industries. Design and manage all truss operations. gained while continuing to develop and A s t h e C a n d i d a t e ’s purchase all lumber and plates. Arrange grow within the management sector. intermediary, our process is unique, payment and shipping. Troubleshoot every aspect including machinery. Implemented As Plant Manager: Create programs to doesn’t require a resume, and only our OSHA safety plan and requirements. motivate employees to achieve peak presents a you to an employer if Print invoices and remove material from productivity. Hire, train, discipline and active inventory using peach tree software. terminate employees. Order lumber and all you approve. To be considered, Set up new customer accounts and validate production materiel. Coordinate weekly every candidate must create and credit references. Design wood and steel production, sales and safety meetings. maintain a JobLine Candidate joists and headers. Assist customer project Research cost on purchasing new equipment. Profile. It’s easy and on line. Just problems for the best economical and Attended monthly city council meetings to practical solution. ensure codes were followed. Oversee click on the New Candidate tab development of truss fabrication facility. at the top of the page. Take your Prior: Truss design and supervise. Purchase Ensure compliance with Cal OSHA and time and be thorough. It’s a tool building material. Arrange billing and Dot. Oversee shipping and optimize freight for your future! You can create, shipping from start to finish. From the costs. Responsible for training leads and small detached garage to the large apartment supervisors on company policy’s. Program save, and update at any time. You can also specify your job, complex, I have done them all... and operate computerized equipment.

JobLine

800-289-JOBS

Time To Hire?

Relocation: CA ID: C12276 ATTENTION EMPLOYERS We have over 1,000 registered Industry Professionals. All Job Searches are not public! We can search behind the scenes to find the right candidate for your opportunity. See what I can do for you!

Thomas McAnally 800-289-5627 x1 twm@thejobline.com

Proficient with Microsoft Programs, Excel, Word, Outlook, ERP software Team growth and development through effective feedback and ongoing mentorship Excellent communication skills Experience working with: Metal, Polymer Blends, Components, Finished Product Assembly, Clean Room, etc. Tenacious, Professional, Detail-Oriented, Strong Sense of Urgency Lean Manufacturing Certified, Kaizen Trained, Fork lift Certified Relocation: Arizona, Arkansas, California, Colorado, Florida, Hawaii, New Mexico, Texas, USA - ALL States Txt: C10500 to 406-210-1226 or call 800-289-5627 x1

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

location, and compensation goals. Our Recruiters are personally committed to helping you find opportunities that fit your goals.

To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab. FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

Don’t Forget! YOU SAW IT IN THE

Safety First! Safety Meeting Topics

December 1st, 2014 #07185 PAGE #31

Adverti$er Aserrado y elaboración de artículos de madera

From State Fund CA.

Los aserraderos y fabricantes de artículos de madera utilizan poderosas máquinas para cortar, contornear y conformar productos diferentes de madera. Las lesiones más frecuentes entre los trabajadores de la industria maderera incluyen traumas en las manos y dedos causados Wood millers and manufacturers use powerful cutting machines por las cuchillas y la maquinaria, lesiones en la parte inferior de la to cut, route, and shape wood materials to create different products. columna debido al levantamiento de objetos pesados, y esguinces y The most frequent injuries to wood industry workers include trauma to torceduras debidas a movimientos repetitivos. hands and fingers from blades and machinery, lower back injuries due Vístase de manera acorde con el trabajo. Use ropa debidamente to lifting heavy objects, and strains and sprains due to frequent, repeated ajustada, quítese la joyería, y amárrese el cabello hacia atrás al trabajar movements. alrededor de maquinaria Use guantes de seguridad para manipular la Dress for the work you do. Wear close-fitting clothing, remove madera y los productos, pero no los use cuando se encuentre cerca de maquinaria en movimiento. Use calzado de seguridad para proteger jewelry, and tie back your hair when working around machinery. Wear sus pies de los productos y materiales pesados, y suelas antideslizantes gloves to handle stock and product, but don’t wear them around moving para prevenir resbalones, tropiezos y caídas. Las gafas de seguridad y machinery. Wear protective footwear to protect your feet from heavy las caretas protegen sus ojos y su rostro contra el polvo y partículas de products and stock, and slip-resistant soles to prevent slips, trips and falls. madera lanzados al aire. Use protección auditiva al ingresar a las áreas de Safety glasses and a face shield protect your eyes and face from flying plantas o al operar maquinaria que produzca niveles peligrosos de ruido. dust and wood particles. Wear hearing Obtenga capacitación en todo el equipo que usted opera. Las protection when you enter plant areas or máquinas eléctricas de corte y mecanizado, las herramientas de corte, operate machinery that has unsafe noise y los elementos de sujeción pueden causar cortaduras, perforaciones, levels. amputaciones e incluso la muerte. Sepa cómo operarlos de manera segura. Utilice métodos de bloqueo con candado y etiquetado cuando Get training on all of the equipment deba inspeccionar, mantener o despejar atoramientos en la maquinaria. that you operate. Powered cutting and Las piezas móviles y de corte deben tener guardas protectoras para tooling machines, cutting tools, and mantener sus manos y otras partes corporales alejados de ellas. fasteners can cause cuts, punctures, Además, cubra las áreas que puedan permitir que materiales como amputations and even death. Know how desportillados y astillas de madera resulten lanzados fuera de la to operate them safely. Practice lockout máquina. Use los equipos únicamente si las paradas de emergencia / blockout when you need to inspect, y los dispositivos de emergencia están funcionando debidamente. maintain or clear jams on machinery. Moving and cutting parts should Para prevenir esguinces y torceduras a sus brazos, hombros y have guard protectors to keep your hands and other body parts away from abdominales, mantenga su trabajo cerca de su cuerpo para el máximo them. Also guard areas that could allow materials such as wood chips confort y nivel de fuerza. Guarde el material y los productos a una and splinters to fly out of the machine. Only operate equipment if the altura que quede entre la altura de las rodillas y de los hombros para el emergency stops and safety devices are working properly. acceso fácil y más seguro. Use las técnicas de levantamiento apropiadas, To prevent strains and sprains to your arms, shoulders, and manteniendo su columna recta e impulsando sus movimientos con sus piernas. Evite levantar cargas pesadas. Use equipo para levantar cargas, abdominals, keep your work close to your body for the most comfort and carretillas, montacargas (con la debida capacitación) y/o transportadores power. Store stock and materials between knee and shoulder height for para mover artículos pesados. Las lesiones ergonómicas pueden tener easy, safer access. Use proper lifting techniques by keeping your back como causa la fatiga y el movimiento excesivo. Tómese micro recesos straight and powering your moves with your legs. Avoid lifting heavy frecuentes para dar un descanso a su cuerpo. Rote sus tareas durante el loads. Use lifting equipment, dollies, forklifts (with proper training) and/ día para evitar el uso repetitivo y excesivo de sus músculos. or conveyors to move heavy items. Ergonomic injuries may be caused by Mantenga la seguridad del ambiente de trabajo proporcionando fatigue and overuse. Take frequent micro-breaks to give your body a rest. iluminación adecuada para la operación de la maquinaria y movimientos Rotate your tasks throughout the day to prevent overuse of your muscles. seguros en la planta. No descuide el aseo y limpieza del sitio de trabajo Keep the work environment safe by providing adequate lighting for para asegurarse de que se limpien inmediatamente los derrames, el polvo safe machinery operation and movements around the plant. Stay on top y los residuos. Asegúrese de que haya un movimiento adecuado de aire of housekeeping to make sure that spills, dust, and debris are cleaned up y ventilación para eliminar el polvillo de la madera en el ambiente de trabajo. Use un respirador en aquellos trabajos donde se genere mucho immediately. Make sure there is adequate air movement and ventilation polvo para prevenir irritación y enfermedades de los pulmones. Aísle o to remove wood dust from the work environment. Wear a respirator for construya cerramientos alrededor de máquinas demasiado ruidosas o con dusty jobs to prevent lung irritation and illnesses. Isolate or enclose muchas vibraciones. Almacene debidamente los productos y desechos machinery that is too noisy or vibrates. Properly store chemicals and químicos para prevenir incendios y mezclas incompatibles. Tenga en el wastes to prevent fires and incompatible mixing. Have a trained first sitio a alguien capacitado en técnicas de primeros auxilios, un botiquín aider, first aid kit, and charged fire extinguishers on site. y extintores cargados.

Wood Milling and Manufacturing

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. PHONE: 800-289-5627

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

December 1st, 2014 #07185 PAGE #32

Don’t Forget! YOU SAW IT IN THE

Adverti$er

new equipment showcase

800-382-0329

Wood Truss Systems

inc.

765-751-9990 www.woodtrusssystems.com

MANUFACTURERS’ REPRESENTATIVES

Tired of service agreements? We have been associated with selling lasers in the wood component industry for over 20 years, dating back to the pioneering truss company in Maple, Ontario. We are big believers in laser projection and have sold systems new and used in the USA, Canada, Australia, and China. In our experience we can easily say that S-L Laser is the best when it comes to customer support and service; they are also the most economical to operate over the life of the system. S-L Laser USA is a company with world class technology based in North Carolina. Cut labor, improve quality, without expensive and time consuming modifications to your existing equipment.

Monet DeSauw FWA 500 Floor Web Cutter •Push Button Powered Blade Angulations •Single Push Button Setting for 2 Blades per Side •Electronic Digital Readouts •Backup Mechanical Indicators •Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks •Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber •12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) •60 Pieces per Minute •(4) Internal 16” Blades & (1) External 16” Cut-Off Blade •Pneumatic Blade Brake on External Blade •Dust Hoods •Vibrating Waste Conveyor (under saw) •Add $3,600 for 12’ Incline Waste Conveyor (adjacent to saw) •Add $1,700 for Extra Set of Blades •Single Sided Setup is available at Additional Cost •480 Volt / 3 Phase

$47,000 FOB MO

www.wasserman-associates.com PHONE: 800-289-5627

Business & Professional Services Listings

A full year subscription is only C$225 Access Madison’s freshly-updated database of Canadian lumber producers conveniently through your internet browser. As always: with extensive, detailed listings of all Canadian sawmills and remanufacturers, panel, pulp and paper mills, and wholesalers Be up-to-the minute on the full spectrum of company information, including: species handled, product mix, rough and surfaced sizes, production volumes, kiln capacity, number of employees, grading agency mill number, and much more

SIGN UP TODAY Each listing in our database has been completely revamped! Don’t go without this vital information at your fingertips. Madison’s Lumber Reporter | madrep@shawcable.com | 604 319-2266

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

FAX: 800-524-4982

M ACdverti$er OMPONENT

ANUFACTURING

December 1st, 2014 #07185 PAGE #33

Don’t Forget! YOU SAW IT IN THE

Adverti$er

Business & Professional Services Listings

COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers

www.componentrunner.com 314.374.7400

CDean@ComponentRunner.com Used Equipment Wanted! Floor Truss Machines Floor Truss Web Saw

ALS or Miser Linear Saws Cyber AT, Servo Omni or AutoMill Trackless Roller Gantry Systems Lumber (Chord) Splicers Triad “Diamond Quad” Framing Tables Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment 48’-70’ Stretch Roll-Off Trailers Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Planx or Wizard Jigging Systems SL Laser or Virtek Laser Projection Systems Field Repair Press Stationary Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16

Before You Buy Equipment!

765-751-9990

Save tens of thousands of dollars by first getting a complete assessment of all your current and future needs with a lean manufacturing consultation. Ö Unbiased, pro versus con assessment

of all manufacturing equipment Ö No referral fees or commissions from the plate or equipment vendors Ö Onsite consulting services for the wood truss and wall panel industry

Toll Free: 800-382-0329 www.wasserman-associates.com COMPONENT MANUFACTURING dverti$er

SERVING THE STRUCTURAL BUILDING COMPONENTS, ENGINEERED WOOD PRODUCTS AND MILLWORK INDUSTRY

Our Advertising Rates will

Blow You Away!

NORMAL NET PROFIT GAINS ARE 3 TO 6 POINTS! 9 75+ 75+ Clients - See Web Site for Testimonials 9 10+ 10+ Years Consultant Services All Areas Covered - 50% Shop / 50% Office

9 25+ 25+ Years in Truss Industry Todd Drummond Consulting, LLC www.toddwww.todd-drummond.com todd@toddtodd@todd-drummond.com Phone 603603-763763-8857 PHONE: 800-289-5627

Thomas McAnally - Publisher 800-289-5627 x1

CALL NOW!

READ/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM

tmcanally@componentadvertiser.com

www.componentadvertiser.com FAX: 800-524-4982

www.mii.com/MiTekAssurance

Page 34

Component Manufacturing Advertiser