A #
194
PUBLISHED MONTHLY September 1st 2015
Component Manufacturing dverti$er
#08194
Serving the Structural Building Components Industry
Inside: Question of the Day:
page 3
Used Equipment:
Saws page 4 Truss Equipment Page 11 Panel Equipment Page 20 Trucks & Trailers Page 27 Misc. Page 28 Door and Stair Equipment Page 31 Parts House Page 32
Safety First Topics in English/Spanish
page 33
JobLine Hiring Zone: Available Jobs Available Candidates
Business Directory:
page 34 page 38
Page 2
www.mitek-us.com/planxreview
Component Manufacturing Advertiser
September 1st, 2015
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
Question of the Day
Published Monthly Editor/Publisher Thomas McAnally tmcanally@componentadvertiser.com
By: Stan Sias
Truss-to-Truss Hanger Selection.
Advertising Thomas McAnally 800-289-5627 x1
Just this week I received this call…“My Building Official has red-flagged and shut down one of the jobsites Stan Sias - National Manager Plated Truss Industry at Simpson Strong-Tie I’m supplying because he says that I have used the wrong hangers for my truss-to-truss connections. I checked the loads in the catalog but he still says I’m wrong! How can this be?”
Distributed FREE via e-mail subscription or on line at www.componentadvertiser.com
Download FREE and subscribe by e-mail at www.componentadvertiser.com News of interest can be submitted to: info@componentadvertiser.com We offer one forum for many sources. Deadline is the 25th of each month. Industry Articles are the property of their creator unless otherwise noted Disclaimer: We reserve the right to refuse any advertisement or material that we deem not in the interest of the industry or the Advertiser. The Advertiser is provided “As Is” including typographical errors, omissions, and mistakes both intentional and unintentional. Believe it at your own risk
Your Building Official (BO) may very well be correct! There is much more to proper hanger selection than just satisfying the demand load. First, there are all the geometry checks to see if the hanger actually fits on the supporting truss, and then fits the supported truss. There is the uplift load check if all nail holes are filled and there is the additional supported truss heel height checks to be sure all the fasteners go thru wood. Then there is the check to assure that the assumed fasteners are going into the assumed number of plies (and not 10d or 16d nails sticking out the back of a single ply girder). There is the additional check of the wood species for both the carrying and the carried members. Last and certainly not least is the required ANSI/TPI 1 cross-grain tension check (see ANSI/TPI 1-2007, Section 7.5.3). This tension perpendicular to grain check is often the controlling factor in the connection design. Let’s look at the Commentary to TPI 1 for what contributes to this specific design check. Remember, NDS provides no value for tension perpendicular to grain for lumber, it simply states that perp to grain applications should be avoided.
Copyright 2008-2009-2010 -2011-20122013-2014-2015
Component Manufacturing Advertiser a division of
JobLine, Inc.
the
September 1st, 2015 #08194 Page #3
1723 Colonial Drive Green Cove Springs, FL. 32043
no reproduction in whole or in part without permission from the component advertiser eMagazine Reading options You have two options with our new eMagazine, 1 or 2 page display. For smaller screens, tablets and phones, we will now offer a 1 page link in our weekly notice. If you open this in two page, you can easily change to one page by clicking on the control Icon above. Archive Copies Available On Line www.componentadvertiser.com
As you can see from the sidebar on the left, the first bullet limits the cross-sectional area for calculating the applied shear stress based on the “effective depth” of the member as opposed to the entire depth. The effective depth is the distance from the bottom of the carrying member to it’s centerline (shown as ‘c’ below) plus the distance from the centerline to the center of the uppermost fastener in the applied joist hanger (shown as ‘y’ below). The second bullet further limits the cross-sectional area for calculating the applied shear stresses to that area in two plies regardless of the number of plies in the girder. The third bullet gets even more restrictive when we get close to the end of the member. This additional restriction comes into play when we are installing hangers (or hurricane ties for that matter) within a distance equal to five times the depth of the member. Continued Page 4
Member PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
SAWS
As you can see, ANSI/TPI 1 places additional restrictions on these connections beyond what is required for other types of construction. Though as stated above, NDS says that cross-grain tension should be avoided, it is rarely if ever enforced out in the field. This is why the Simpson Strong-Tie catalog has the following note in its Important Information & General Notes, General Instructions to the Designer (CC-2015, p.18).
To remind the specifier of the importance of this design consideration, the following footnote appears under practically every load table within the Plated Truss Connector section of the catalog.
Let’s look at some examples of hangers subjected to the ANSI/TPI 1 Limits. We will utilize the Simpson Strong-Tie Connector Selector (CS) software to see hanger capacities with and without the limits being applied, and perhaps see exactly where the Building Official was coming from when he shut the job down. First, we’ll look at a connection geometry that has a two-ply girder truss carrying a common truss, a typical common to girder application. Let’s first view the results assuming no ANSI/TPI limits (aka the catalog results).
2005 Alpine AutoMill SC Saw Five-blade, servo-controlled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. It has 23 axes of automated movement, enhanced diagnostics, auto management reporting. The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [4] 18" and [1] 32" blades with air brakes, yellow outfeed skatewheel conveyors and pc, carriage and cabinet compressed air connections (for cooling & dust buildup prevention). Installed and operational. 480v/60Hz/3Ph power. Price: $89,990 :: FOB TX. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2005 Maximizer Technologies Max Custom Cutter Model WA420 (4 High - 20’ Capacity). Automated Length & Angle Function as directed by Truss Design Software. Touch Screen Operation. 6.17 HP Motor with 25.6” Blade. 220 Volt / 3 Phase. Installation & Operator Training available at additional cost. Microcom Model 400 Label Printer $40,500 FOB KS. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
September 1st, 2015 #08194 Page #4 SAWS
2006 Alpine PF90 AutoMark System •Wall Panel Plate Cutting & Marking Saw •Touch Screen Interface •Automated Length Stop & Ink Jet Printer as directed by Design Software Output •Cuts & Marks Both Top & Bottom Plates Simultaneously •24’ Infeed and 16’ Outfeed Table •10 HP Motor with 20” Blade •240 Volt / 3 Phase $29,500 FOB FL Wasserman & Associates 800-382-0329 www.wasserman-associates.com
1999 MiTek Cyber Saw Frame #094, fully automated five-blade component saw. Cutting performed by (2) 16” X 6 HP, (2) 20” X 6 HP and (1) 32” X 12.5 HP blades, with Dell PC upgrade featuring Windows XP and touch screen controls for fully automated part input, all powered movements, cuts 2x4 through 2x12” and 4x2”. Lengths cut from 15 inches (90/90) to 20 feet. Includes scrap conveyor (no incline). Recently inspected by OEM, currently not under power. 220 volt, 3 phase electrical. $26,890 FOB NY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Check out the new
Parts House We can see that the CS software shows the LUS24 having a capacity of 830# download and 490# Uplift, which matches the catalog loads exactly. Now let’s assume that this connection is subjected to the ANSI/ TPI 1 provisions (after all, we are designing to the Standard, right?).
Section on Page 32!
Continued Page 5
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
2002 Omni Mini-Miser Saw Automated Wall Panel Component Cutting & Layout. 5 HP Motor with 14” Blade. Ink Jet Printing System (2 Faces & 1 Edge). Bulk Feeder. Incline Live Deck. 7 Magazine Feeders (3-2x4, 3-2x6 & 1-2x8). Installation Available (quote upon request). $35,900 FOB MN. Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
Assuming the Interior Zone, meaning we are beyond the five times the depth End Zone, what happens to the allowable hanger loads.
The same LUS24 hanger is now limited to the ANSI/TPI 1 prescribed 800# download instead of the 830# catalog load. In the End Zone it gets hit even harder!
Just for fun, look also at the LUS26 in the three screen shots above (using the blue underlines). Without the TPI 1 restrictions, the LUS26 would have 1075# download. The TPI 1 Interior Zone would limit it to 800# and the End Zone limits it to 400#. Maybe the Building Official was on to something. Do you utilize automatic hanger selection in your Truss Design software or the power of the Connector Selector software or are you still utilizing catalog loads when specifying truss-to-truss connections? The Simpson Strong-Tie Connector Selector software is a free download at http://goo.gl/ZPPf8m. Thanks for reading. SS
SAWS
2005 Apollo Saw with Mango Plate Marker 5.5 HP Motor with 18” Blade. Minimum Angle of 10 Degrees with 36” Stroke. Manual Saw Angulation with Air Brake on Turntable. Laser Pointer, Variable Stroke Limiter & Plexiglass Shield for Operator Safety. Automated 20’ Length Stop & Plate Positioner as directed By Design Software. Computer, Monitor & Cabinet Enclosure. MangoTech Plate Cutting & Marking Software. 30’ of Roller Conveyor with Stands. Add $11,285 for Touch Screen Computer Upgrade. Add $3,680 for 2 Day Onsite Installation & Training. Excludes Dust Collection System. $15,000 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2003 Omni Miser Saw •Automated Wood Processing System •Lengths to 16’ •Ink Jet Print System A (One Face) •Incline Live Deck •Bunk Feeder •(5) 2x4 Magazines •Installation & Training is available at additional cost $67,500 NOW $49,500 FOB MN Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2005 Onmi Miser RT Roof truss only. Features A-print one face side, auto-deck material feed, spare 16” blade. Price new was $175,000. $78,990 NOW $53,990 FOB CA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
September 1st, 2015 #08194 Page #5 SAWS
2000 Auto-Omni Automated Component Saw Automated Setup as directed by Truss Design Software Output. Computer, Enclosure & Stand. Remote Monitor. 5 Blades cut 2x3 through 2x12 and 4x2 from 11” to 20’. Belt Waste Conveyor (under saw). Excludes Incline Waste Conveyor (adjacent to saw). Installation Available (quote upon request). $39,000 FOB OH. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2000 Monet DeSauw B500 XE Component Saw 2000 Monet Desauw B500 XE component saw features semi-automatic user interface with backup mechanical indicators. This saw comes complete with a 12' x 16' 4-arm CMF live in-feed deck. The B500 XE features grouped functions such as automatic blade alignment for chords or webs and automatic centerline adjustment of nominal board size. Other saw features include over travel protection, pneumatic blade brakes on all 5 blades, safety fencing, shaker pan scrap system, scrap incline, manual skate-wheel infeed stands, and spare set of blades. 18" minimum cut, 20' max. 480 volt, 3 phase. Price: $38,990 $34,900 :: FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2007 Omni Miser Saw Installed Early 2008, Removed Summer 2015. Model RTB (Roof Truss Bevel). Wall Panel Software. Crooked Lumber Sensor. Print System D (Both Faces & One Edge). 10’ Manual Staging Deck. Spare Parts. Has LASM Error that needs troubleshooting. Excludes Dust Collection System. $67,900 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982
CUSTOM SOLUTIONS Â WITHIN REACH
Simpson Strong-Tie is on the job where you are with structural connectors and fasteners, truss plates and component design software. We’re providing you with innovative products and customizable tools to make it easier for you to design components and build structures while managing your business.
SSTM-ICS15_16x9_3-4.indd All Pages
Come visit us at BCMC and let us show you our new solutions designed around you, including our Component Solutions™ Director and Truss Studio software. Connect with us: (800) 999-5099 and strongtie.com/ics. www.strongtie.com/ics.
Š 2015 Simpson Strong-Tie Company Inc. ICS15-C
8/12/15 10:05 AM
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
September 1st, 2015 #08194 Page #8
Excellent Customer Service and Productive Equipment Provide a Decisive Advantage Outstanding customer service and the productivity and durability of Alpine Equipment have enabled Warman Truss to grow consistently since its founding 17 years ago. Managing Partner Roy Bedient focuses on optimizing plant efficiency through equipment innovations and effective preventive maintenance programs. Since its establishment in 1998, Warman Truss has relied on the productivity and reliability of Alpine equipment to help build a highly successful business. Located in Warman, Saskatchewan, Warman Truss serves all of Saskatchewan and Alberta. The company has also completed work in Manitoba and British Columbia. Warman Truss produces standard and custom-made truss systems and I-joists for residential, commercial and agricultural buildings, as well as a select group of retail dealers. The firm’s portfolio also includes several allied building and construction industry businesses. Managing Partner Roy Bedient oversees all aspects of the production process. He has watched Warman Truss grow steadily to its current size of about 90 employees. The plant typically operates two shifts, and production has increased every year, even during the downturn. “Our business model is straightforward – we focus on what we know and do well,” said Bedient. “Service is at the forefront, and we have maintained many of our core customers from the first day they started with us. I’m a firm believer that if you serve customers well, they won’t go anywhere else.” Bedient installed Alpine equipment when the plant opened and is one of Alpine’s most loyal customers. Warman Truss now has 10 pieces of Alpine equipment, and Bedient credits Alpine’s equipment and strong technical support for helping the business grow. “We are one of the province’s leading truss suppliers and take pride in our state-of-the-art cutting and assembly equipment and software,” pointed out Bedient. “Alpine has always been a great fit for us, and we like the fact the equipment is well made, user-friendly, easy to maintain and has reliable software. The company is very responsive whenever we need support.” In late 2014, Warman Truss installed the ALS 276 Motion Control Upgrade on its eight-year-old saw, and employees are pleased with the results. “The saw is now 10 to 15 percent quicker and has been running smoothly since the upgrade,” said Bedient. “The new drives helped as well. The saw usually runs at least 12 hours a day, and we anticipate the upgrade will extend its life by at least five years.” According to Bedient, the upgrade process itself took only about a day and a half. “We like the truss-by-truss cutting and optimize-by-cost features. We don’t do a lot of beveling, but it’s nice to know it’s there if we need it.” To keep its equipment running smoothly, Warman Truss follows a rigorous preventive maintenance program, which is reviewed and updated regularly. “Our philosophy is to address issues and fix them right away before they become bigger problems,” he emphasized. “We have a simple maintenance program stressing cleanliness throughout the plant and make sure our equipment is as clean as possible. We also follow the maintenance recommendations in Alpine’s equipment manuals.” To further enhance plant productivity, Warman Truss installed Alpine’s eShop software about a year ago. “The program has increased our assembly and cutting productivity by about 30 percent,” noted Bedient. “The software has greatly enhanced our overall efficiency and enabled us to optimize our staffing levels.” PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
INCREASE PRODUCTIVITY— UPDATE YOUR ALS 276. Why Upgrade? • Increase saw speed • Reduce truss costs • Cut truss by truss • Avoid downtime • Extend service life
The Alpine ALS 276 linear saw has been a longtime industry leader when it comes to productive cutting. Alpine offers a new upgrade kit that increases the saw speed, optimizes material use and works with Windows® 7.
Upgrade Now!
(800) 521-9790 | alpineitw.com alpineitw.com
Alpine part number 37124 The motion control upgrade package is available now and takes only one day to install when using a qualified electrician.
Contact your local Alpine representative or Carlos Lozano at (800) 786-5006, ext. 4263 or clozano@alpineitw.com to order the upgrade kit. Page 9
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the SAWS
SAWS
SAWS
R P ed r u ice ct io n
SAWS
September 1st, 2015 #08194 Page #10
2000 Alpine AutoMill RS Automated Component Saw Automated via Download or SemiAutomated via Touch Screen Input. 19 Axes of Automation. Sets up in 2 to 19 seconds. Five Blades cut 2x3 thru 2x12 from 13” to 20’. Waste & Incline Conveyor. 480 Volt / 3 Phase. Available in August 2015 $44,500 NOW $29,500 FOB ON Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2004 TCT 1100 Linear Saw Series 1100 linear saw features 3 HP, 3 phase saw motor with 20" carbide tip blade, 3 axis motion control system utilizing magnet servo motors. Cuts chords and webs from 2x4, 2x6 material. Saw is left feed and includes a pc with touch screen, Matthews Jet-A-Mark DOD 2002A inkjet printer, with 20' in-feed and 10' Outfeed OEM supplied conveyor. 230V, 3 Ph, 20 Amp service. Price: $49,900 NOW $39,900 FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2004 TCT 1100 Linear Saw Series 1100 linear saw features 3 HP, 3 phase saw motor with 20" carbide tip blade, 3 axis motion control system utilizing magnet servo motors. Cuts chords and webs from 2x4, 2x6 material. Saw is left feed and includes a pc with touch screen, Matthews Jet-A-Mark DOD 2002A inkjet printer, with 20' in-feed and 10' Outfeed OEM supplied conveyor. 230V, 3 Ph, 20 Amp service. $49,900 $39,900 :: FOB ONT. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
MiTek Combi Set Web Saw •Four Blades Cut Lengths from 2' to 16' •Waste & Incline Conveyor •Extra Set of Blades •220/440 Volt - 3 Phase $13,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2005 Alpine AutoMill SC Saw Five-blade, servo-controlled computerized saw, sets up in 2 to 19 seconds and downloads from a network or by using a touch screen for ease of operation. Five-head automated component saw works in both automated (downloading files) and semi-automated control via touch-screen input. It has 23 axes of automated movement, enhanced diagnostics, auto management reporting. The SC cuts from 13" to 20' long material in size range from 2x3 through 2x12, and includes [4] 18" and [1] 32" blades with air brakes, yellow outfeed skatewheel conveyors and pc, carriage and cabinet compressed air connections (for cooling & dust buildup prevention). Installed and operational. 480v/60Hz/3Ph power. Price: $89,990 :: FOB TX Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
2006 Spida Automated Truss Saw Automated Stop & Automated Saw Rotation as directed by Truss Software. 5.5 HP Motor with 18” Blade. Angles from 10 Degrees to 170 Degrees. Length of Cut: 24”. Depth of Cut: 6”. Touch Screen Computer with Enclosure & Stand. 20’ Outfeed Table with Automated Stop. 10’ Infeed Roller Conveyor with Pneumatic Clamp. $25,000 NOW $22,900 FOB TN Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Reconditioned 1995 Auto Omni Component Saw Price: $86,900 :: FOB OH Condition: Good+ 1995 Koskovich Auto Omni saw. 5-blade automated saw fully frame-off reconditioned to nearly new standard with upgrades in 2015. Includes shaker waste conveyor with factory side pans, [3] 20 inch blades, [1] 30 inch blade and [1] 12 inch blade. Fully automated setup with full power length and all axis angulation, single sided setup from operator console, 2x3 through 2x12 and 4x2, 20’ to 9” @ 90°/90°, spare blades, remote monitor, full set of electronic spares and manual. New computer with updated software, flat screen monitor, entire saw is newly painted. Also included: Full 3-month parts warrantee if installation is performed by independent tech. Geoff Monger. 208/240/480 volt,3 phase, 100 Amp and 120 vac, 90 Amp electrical required. Photos show saw during restoration. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Autozen Automation
Truss Equipment
Service and Parts On Site Service and Repair
817-666-0880
Clary Shortcutter Floor & Roof Truss Web Saw •Four 5 HP Cutting Heads •Cut 2x4 and 4x2 from 8” to ?? •Manual Length & Angle Adjustments •Powered Material Conveyor (up to 25 pieces per minute) •Overhead Material Hold Downs •Waste & Incline Conveyor $10,900 FOB KS Wasserman & Associates 800-382-0329 www.wasserman-associates.com
• • • • •
Automills ALS 275, 276 and 286 SpeedCut Saws Manual Saws Automated/Manual Tables • Coast to Coast
• • • • • •
Maintenance Contracts Remote PC Support PC Repair Installations De-installations Servo Motor/Amplifier Rebuilding
www.AutozenAutomation.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
SAWS
September 1st, 2015 #08194 Page #11 TRUSS EQUIPMENT
800-382-0329 2008 Alpine X4 Linear Saw •Touch Screen Control Panel •5 Axes of Automation •15 HP Motor with 22” Blade •Ink Jet Printer •Auto Feeder (Live Deck) •Outfeed Conveyor •230 Volt / 3 Phase $49,900 FOB AB NOW $39,900 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2005 Alpine AutoMill SC Automated Component Saw • Servo controlled for fast set-ups, accuracy and system diagnostics • 23 Axes of Automation • Ink Jet Printer • 1-20” Blade, 3-18” Blades & 1-32” Blade set-up in 2-15 seconds • Incline Waste Conveyor • Excludes Live Deck and Outfeed Skate Conveyor
$99,000 FOB AB
2004 TCT EZ Trimmer Model CT041-2000. New Variable Speed Drive & Push Cylinder with Linear Slide. 2x3, 2x4 & 2x6 Capacity, Double Bevels on Pitches from 0/12 thru 12/12. Cycle Time: 15 Pieces / Minute. Air: 9 CFM at 80 PSI. Electrical: 230 Volt / 3 Phase / 20 Amp / 5 HP Motor. $8,900 FOB FL Wasserman & Associates 800-382-0329 www.wasserman-associates.com
1999 TimberMill 6-20 Pro Component Saw Six Blades cut 4x2 & 2x4 through 2x12 Lumber from 12” up to 20’-0”. Base Plane Referencing and Pivot Axis Elevation Direct Link: http://goo.gl/xaXNAw for Faster Setup and Greater Accuracy. Powered Angulation & Carriage. Single Sided Digital. Waste & Incline Conveyor. 480 Volt / 3 Phase. Excludes Live Deck. $25,000 FOB PA Wasserman & Associates www.wasserman-associates.com 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627 Read/Subscribe online at www.componentadvertiser.com
Inc $13,000 in Spare Parts
2008 Pacific Automation Floor Truss Gantry Pacific Automation Floor Truss Gantry LS - Side-eject, 40’ x 5’4” table, with single set-up. Builds floor trusses from 12” to 24” depth up to 32’ in length. System features a raised-rail design, gantry-head with wired remote control station, and 24 inch diameter roller that travels at 120 Fpm and includes dual park-stations, under-table air cylinders, on-table splicing, on-table plate staging, and pop-up ejector. One owner, low hours, 575V, 3 phase electrical service. $44,900 FOB AB. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1983 Jager Travelmatic Mini III Hydraulic Bridge Press Designed for smaller trusses the system is capable of handling 2”x4” and 4”x2” trusses with no adjustment, ideal for hips, jacks, and valley-sets. No finish press required, system consists of a 6’ x 40’ drilled & tapped steel table, table guided press head (trackless), with a 6’x12” press platten, riding operator platform and all available jig hardware. 575 volt, 3 phase electrical. Price: $13,890 :: FOB ON. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Check out the NEW
Parts House Section on Page 32! FAX: 800-524-4982
Your NEW source for MangoTech’s Automated Apollo Saw & Plate Markers
Contact Information: PH+1-866-647-7771 Sales@sq-1Design.com
Visit us at www.SQ-1Design.com
Your source for Roof Truss, Floor Truss and Wall Panel Equipment
To Our Valued Customers, As you may have heard, Australian based Multinail Machinery Pty acquired Spida Machinery and MangoTech Pty in 2013. In a effort to provide North American customers with improved local product support, advancements, and additional product offerings, Square 1 Design & Manufacture Inc. has been contracted to provide service and support for new and existing Spida and Mangotech products. Customers may continue to contact their local or national distributors for equipment needs or may contact Square 1 Design & Manufacture Inc. directly. Square 1 Design is gearing up for improved service and support, currently stocking a variety of the common replacement parts for both Spida Machinery’s CSS & CXM saws as well as the Mangotech product line including the Apollo Saws. Square 1 Design & Manufacture Inc will continue to provide our industry leading Roof and Floor Truss assembly equipment including: trackless roller presses, finish rollers, stackers, Rolsplicers as well as all of the Klaisler Mfg. product.
Contact Information: Square 1 Design & Manufacture Inc. PH+1-866-647-7771 Fax: +1-866-646-5771 Sales@Sq-1Design.com Kind Regards, Sean Hubbard C.E.O. Square 1 Design & Manufacture Inc. (Office) 866-647-7771 Ext 105 Sean@SQ-1Design.com
Visit us at www.SQ-1Design.com
M ACdverti$er omponent
anufacturing
TRUSS EQUIPMENT
MiTek/Tee-Lok Gantry System MiTek/Tee-Lok 102’ working length, side-eject, gantry system includes (1) 2006 MiTek 24” diameter gantry head, (1) 1996 Tee-Lok 20” diameter gantry head, (1) TeeLok 20” diameter finish roller press, (13) wood-top Tee-Lok tables with skate-wheel ejectors, (11) idle rollers, (10) stand-alone receivers and rail. Includes all available hardware. 220 volt, 3 phase electrical. $48,990 FOB FL. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Pacific Automation Floor Gantry with Finish Roller & Stacker 2005 Pacific Automation 24” Diameter Floor Gantry (7 1/2 HP). Flat Park Section & Incline Ramp Park Section (for end eject). 40’ Table with Air Cylinder Clamping. Maximum Truss Length: 36’. Floor Truss Depth: 11 1/2” to 26”. Side Electors in Jig #1, End Eject Rollers in Jig #2. 2005 Pacific Automation Floor Truss Finish Roller. 2007 Pacific Automation Floor Truss Stacker. Stored outside under lumber tarps since 2011 . $67,500 FOB AB. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Alpine 34’ Floor Truss “Speed Roll” Gantry System Alpine 34’ Floor Truss “Speed Roll” Gantry System / 38’ Overhead Plate Rack / Air Clamping / Operated Indoors / Ready for Immediate Shipment. $15,500 FOB NH. Salter Associates 770-434-1006 www.salter.com PHONE: 800-289-5627
Adverti$er
Don’t Forget! You Saw it in the
TRUSS EQUIPMENT
Refurbished 1997 CMF Tracked Gantry System 1997 side eject CMF tracked gantry system with 14’ by 93 ft. working length. Tables and finish roller press were refurbished in 2007. System features (13) plastic topped tables with slotted-steel bottom chords, (1) 24” CMF diameter gantry head, (1) CMF 24" finish roller press, (4) idler rollers, and all available receivers. 440 volt, 3 phase electrical. $43,890 :: FOB WA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
TRUSS EQUIPMENT
TRUSS EQUIPMENT
Design your own custom roof truss gantry! Don’t see the system that is just right for you? With many our listings, we can split the system up to create the perfect fit for your space or budget limitations. Need a 46’ RoofGlider, with 50’ of conveyor, and no final roller. or an 80’ Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building your custom solution. Wood Truss Systems 765-751-9990
Alpine Speed Roll Model 47 Kick-Leg Floor Machine 1994 Alpine Speed Roll, Model 47, kick-leg floor machine. Serial number 14-12277-A. 40 feet overall length, 36 foot maximum length truss, builds floor-trusses from 10” inch to 24” inch truss depths. Includes one head with 18" diameter roll, two parking rail areas, and table with air cylinderclamp system. 480v, 3 phase power. (Plate rack shown is not available, vertical rack support stands are included). $8,400 :: FOB ONT Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2007 Klaisler Tracked Gantry Head Klaisler Gantry with riding platform, 24" diameter roll, variable frequency drive and Sumitomo twin drives, Very low hours. 230/460v, 3 Ph. Price: $18,990 :: FOB SC NOW $12,890 Wood Truss Systems 765-751-9990 www.woodtrusssystems.com MiTek TK-8 Klincher 60' C-Clamp Systems MiTek TK-8, 20 ton C-clamp style press with 60’ working length floor-mounted jig filtering. Each system includes: support beam, manual trolley, counter balance arm with hydraulic reservoir. Three systems available. Price is per 60’ system. $6,900 each. FOB CA. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
September 1st, 2015 #08194 Page #14
New Square 1 Floor Truss Finish Press New 2014 Square 1 floor truss finish roller press, four-foot* wide x 3 1/2” tall throat. Use of this process speeds assembly and transports finish truss away from the production area, adds quality and peace of mind for your finished floor trusses. The unique “uni-body” construction creates a ridged machine that does a final press of the connector plates for complete embedment into lumber, saving wear on your floor assembly machine. 14” diameter rolls, 7 1/2 HP motor, 80# chain, 114 FPM speed, emergency shut-off bars, chain and sprocket Klaisler Receiver Arms guards, integrated brake. Available options (27) Klaisler Receiver Arms include: *other roller widths, Heavy-Duty Date of Manufacture: 2005 & 2006 upgrade, gear motor drive, and soft start Excellent Condition controls at an additional charge. 208, 240, Reduced - $550 @ any quantity FOB GA 480 volt electrical. $15,750 FOB IN. Salter Associates Wood Truss Systems 770-434-1006 765-751-9990 www.salter.com www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com
Hydro-Air Mark-10 Mono-Press •Press Tonnage: 37.5 Tons •Platen Size: 10” x 18” •Lumber Size: 2x4 to 2x10 •Includes: Hydraulic Power Unit, Counterbalance Arm, Trolley & C-Clamp Press •Excludes: Overhead I-Beam, Electric Feed Rail & Pedestals (all available at additional cost) •480 Volt / 3 Phase $8,000 FOB AZ. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Mitek 40' Floor Truss Machine Build floor truss depths up to 24”, lengths up to 40’. Track Mounted Roller Gantry with Ride Platform. 230/460 Volt - 3 Phase - 10 HP Motor. Overhead Plate Rack. Dual Safety Bars. Air Cylinder Clamping. Stored outside for 2 years. $21,900 Now $20,900 NOW $19,900. FOB GA Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
You Saw it in the
TRUSS EQUIPMENT
2009 MiTek RailRider Floor Truss Machine MiTek RailRider floor truss gantry, sideeject system, 42 foot working length, 56 foot overall length, 24 inch diameter gantry roll. OEM options including: overhead plate rack, "A-side" flip jig, riding platform and joy stick control. Minimum depth truss 10 inches and the maximum depth 24 inches. Clamping fence actuated by air cylinders mounted under the table. System includes electrical s/o chord, masts, wire support cable. Machine is wired for 460 volt, 3 phase electrical service. $78,890 FOB NC. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Adverti$er
Don’t Forget! TRUSS EQUIPMENT
1986 Mid-Atlantic (Tee-Lok) Tracked Gantry Mid-Atlantic 75 foot working length roof gantry featuring one (1) 18” diameter roller gantry head with pendant controls, twelve (12) 4’-8” x 13’-6” tables configured for soft top (plastic) with imbedded uni-strut jig rails. (plastic and underlayment removed). Eight table ejectors need repairs. Includes rail, power masts, all available aisle plates and jigging. 480 volt, 3 phase electrical. Price: $17,990 :: FOB NY Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
FitzGroup.com
September 1st, 2015 #08194 Page #15
TRUSS EQUIPMENT
TRUSS EQUIPMENT
1986 Mid-Atlantic (Tee-Lok) Tracked Gantry Mid-Atlantic 75 foot working length roof gantry featuring one (1) 18” diameter roller gantry (needs new pendant controls), twelve (12) 4’-8” x 13’-6” tables configured for soft top (plastic) with imbedded uni-strut jig rails. (plastic and underlayment removed). Eight table ejectors need repairs. Includes rail, power masts, all available aisle plates and jigging. 480 volt, 3 phase electrical. $17,990 :: FOB NY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
1992 Clark Industries 14' Tri-Axis Press with Kick-Leg Table Model 4000 Gantry Press (14’) with Joystick Control, Ride Platform & Floor Track. 20 HP Hydraulic Pump Motor. 16” x 19” Pressing Platen. Kicklegs & End Stands for 12’ x 50’ Table. Combination Steel/Wood & Plastic Top with Jig Bars $28,000 FOB MI Wasserman & Associates 800-382-0329 www.wasserman-associates.com
RFitzgerald@FitzGroup.com
54' CMF Gantry Roller with Tables CMF gantry system consisting of (1) 24” CMF tracked gantry, (9) 5' 11" wood tables with plastic tops and ejectors, (1) 5' 11" wood tables with plastic tops and no ejectors, (23) 14' conveyor rollers, (3) 12' conveyor rollers, approx. 80 feet of rail and (15) truss receivers. Includes any available system jigging hardware, and all available spare parts if any. Price: $38,990 :: FOB PA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Helps cut lumber even faster tHan it Helps cut costs. Compatible with any linear-feed saw, the WoodRunner™ automated lumber retrieval system increases production by 30%, while reducing labor by half. WoodRunner sets the pace of the operator, and ensures accurate lumber selection every time. Visit www.apexmw.com or call 507-322-3700 to learn more today.
PHONE: 800-289-5627
006_WTS_wood_runner ad_7.123x3_v3.indd 1
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982 12/15/14 5:38 PM
M ACdverti$er omponent
anufacturing
www.todd-drummond.com
Adverti$er
Don’t Forget! You Saw it in the
todd@todd-drummond.com
September 1st, 2015 #08194 Page #16
(603) 763-8857
80+ Companies Completed - 25+ Years in the Truss Industry - 10+ Years in the Consultation Business
Normal gains for most clients are 3 to 6 points in net profit! √ Lean Manufacturing Best Practices Made Simple and Practical Approximately 18 hours of training spread over 4 days that has been tailored for your operations
√
√ √
√ √
This is a planned and tailored structured training week to bring all your people onboard so they can all understand the importance of the new ideas. 10+ years of structured information that is constantly being improved upon 50% pertains to the manufacturing and 50% is for all the other departments No B.S. theoretical ideals but actual, real, tried-and-true best methods being used every day by many CMs Established Time Standards for Truss Manufacturing - Over 80 different factors to choose from based on different equipment and materials which have been derived by time and motion studies Improve your costing and pricing of each project Improve your scheduling of manufacturing Understanding of your manufacturing teams productivity Implement an effective incentive program that rewards individual’s efforts Equipment – Save thousands of dollars by getting an unbiased advice for what is best for you Many companies pay for the consultation cost with this one aspect of the advisement Linear Saw performance time spreadsheet included with consultation. Written report with all keys suggestions and copy of PowerPoint training Industry performance ratios for key cost groups and P/L provided
Testimonials of Consultation Services at http://todd-drummond.com/todds-profile/ InteFrame Components LLC Tom Manning – General Manager Nampa, Idaho In 2009, InteFrame was created by the joining of two former truss companies. Together they combined the best parts of their processes and became what is now known as InteFrame. Coupled with many years of experience and the ambition to be more than just your average supplier, InteFrame has become the largest truss supplier in Idaho. We continue to expand and improve upon the strong foundations of our past while always staying focused on the future. Since our conception, year to year sales have grown tremendously. With this new growth, our need for capacity has also increased. Our first impulse was to purchase new equipment to fulfill this growing requirement, but after many discussions our company took the approach to focus attention on the current manufacturing process. InteFrame has always been attentive on lean manufacturing practices and continually works daily to put these practices into place. To validate, provide new ideas, and possibly increase the effectiveness of these practices, InteFrame looked to Todd Drummond and his formal experience. His methods for training led our group down a path that touched on every aspect of our business. The consultation not only looked at the manufacturing area, but focused attention on our sales, design, and accounting methods. The daily routine was divided with the mornings being utilized as Todd’s “fact finding” time of our company’s practices. The afternoons were constructed of training sessions that were serious and methodical, all being guided by Todd’s understanding of the fact finding session from earlier in the day/week. Todd’s insights and suggestions were based upon his assessments of our company’s practices and performance, as well as being guided by best practices he has observed through the numerous other consultations he has been a part of. The end result is our company has a much clearer understanding of areas we can improve. Todd’s consultation confirmed some of our own ideas and challenged us with new ones enriching our internal processes and creating better efficiencies. Where Todd challenged us he provided the why, how, and what to successfully complete and implement the change. Through better management practices, guided by Todd, our company was able to increase capacity in our manufacturing area. Our team has many decades of experience in the component industry, and we all still gained valuable new ideas and practices from Todd’s consultation. Our investment in his services has made a real difference in our processes and methods of doing business. Most weeks Todd’s information and comments still populate most of our meetings. His consultation has allowed an increase to profits and is highly worth the investment. PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
Just a few of the many clients using the AppWright application in the construction industry.
http://todd-drummond.com/appwright/
M ACdverti$er omponent
September 1 , 2015 WE DI DN’T #08194 Don’t Forget! You Saw it in the Adverti$er Page J UST WEATH E R #18 TH E STOR M. st
anufacturing
W e helped
PART TH E CLOU DS. Matching you with the right wood component equipment. New or used. Through thick or thin. www.WoodTrussSystems.com www.mitek-usa.com
765-751-9990
WE DI DN’T J UST WEATH E R TH E STOR M.
W e helped
PART TH E CLOU DS. Matching you with the right wood component equipment. New or used. Through thick or thin.
www.WoodTrussSystems.com www.WoodTrussSystems.com 765-751-9990
005_WTS_WOOD _TRUSS_AD_2.25X4.75_v2.indd
1 12/15/14
7:42
Table Guided Gantry System by Square 1 Manufacturing
New, table-guided (NO rail) gantry system by Square 1 Manufacturing, side-eject or end-eject options, with continuous production tables built to length. Available in steel, plastic or combination table top options. Can be fabricated to received automated jigging. New 24" diameter gantry heads feature raised operator platform, heavy-duty steel roll with 4" shaft, baffles and heavy-duty spherical bearings, dual 7.5 HP braking gear motors for a total of 15 HP, easy adjusting bogie wheel assemblies, safety bars, Wampfler "finger safe", under-table-mounted electrical supply and optional soft start drive. Square 1 Manufacturing can provide the combination of powered transfer rolls, sloping ejectors, receivers, idler conveyors and powered conveyors required to meet your configuration needs. 440 volt, 3 phase. Price: $(Based on required configuration) :: FOB IN.
Call for pricing (Based on configuration) 765-751-9990 www.woodtrusssystems.com
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
SQ-1 Series Roof Truss Line Adverti$er
Don’t Forget!
The:
You Saw it in the
September 1st, 2015 #08194 Page #19
CONTACT SQ-1 AT: 866-647-7771
Visit us at www.SQ-1Design.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
TRUSS EQUIPMENT
Idaco Trussembler Hydraulic Clamp System Idaco hydraulic clamp system includes (12) hydraulic clamping heads, 50 ft. of bottom chord track, 14 ft. of peak track with all available air supply piping and fittings, (5) bottom chord heads, pop-up ejector arms for the bottom chord, (2) additional heads that require repair, (1) peak table, (4) free standing top chord heads ,hydraulic pump unit with a spare pump motor, controller stand, (2) spare cylinders for the hydraulic heads, and (2) spare recoil springs for lifting the heads. 240 volt, 3 phase electrical. Price: $8,990 NOW $6,300:: FOB BC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Mitek 14' x 100' Side Eject Roller Gantry System Mitek 14’ x 24” Diameter Roller Gantry (Track Mounted). 100’ of Walk-Thru Steel Top Tables with Pop-up Skatewheel Conveyor. Unistrut Jigging & Jig Hardware. Powered Exiting Conveyor with Receivers. Mitek 14’ x 24” Diameter Finish Roller. Outside Conveyor with Peak-Up Truss Stacker. $69,000 FOB AR. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
e ic io r t P uc ed R n Alpine RAM Easy Rider Tables 10 Each - Steel Tables with Slotted Tops & Liftouts. $3,000 per Table or $27,500 for all 10 Tables. FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
September 1st, 2015 #08194 Page #20
Adverti$er
Don’t Forget! You Saw it in the WALL PANEL EQUIPMENT
2004 MiTek/PCS Wall Panel Line System includes Power Framer nailon-the-fly framing table builds 8’ to 12’ wall heights up to 24’ in length, workers remain stationary as the wall continuously and automatically moves through nailing station. Framer transitions to power squaring conveyor with E-Series Multi-tool Turret Bridge for application of exterior sheathing. System transitions to 20’ stacking queue conveyor with Smart Crane which auto stacks up to 16’ wall lengths according to pre-determined bundle layout. 460v/60/3, 120v/60/1, air at 100 psi required. $48,990 :: FOB WI. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
WALL PANEL EQUIPMENT
Panels Plus Wall Panel Framer Wall panel assembly equipment for wood or steel wall panels, floor-panels, and related framing components. The base framing table allows you to assemble from 7-12 foot wall heights, at industry standard 16 foot lengths, at a working height of 29 to 32 inches. Design includes controls at each end of table, squaring stops and pneumatic clamping for consistent wall panel quality. Frames 2x4 or 2 x 6 walls, with color-coded, steel stud locators at 16 and 24 inches O.C. spacing. Includes pop-up skate wheels for easy transfer of completed wall frame. Framing table can be configured to receive wall framing light bars, other options include custom buildable wall heights, lengths and auto-indexing of optional 2 or 3 tool carriages. Additionally from Panels Plus are sheathing tables with features that include foot pedal control at squaring end of table, with squaring stops, roller conveyors at both sides, single pendant controls for bridge, tool spacing at 6 inch centers with 3 inch bridge shift for offset nailing. Tool bridges can accommodate from 2 x 4 to 2 x 8 walls, with seam tilt being standard equipment Panels Plus Tool Bridges are available with single beam or dual beam design for two different tool mounts on one bridge. Squaring stations, sub-component tables, conveyors and panel lifts are also available. Price includes factory installation and training. 50 CFM at 120 psi air. 120 or 230 volt, 1 phase electrical. From $40,200 base price FOB MN. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Does Your Truss Plant Have Thousands of Dollars in Off-Line Obsolete and Unused Equipment and Parts!
Sell It! in the Advertiser Call 800-289-5627
2005 Viking ADT Wall Panel Framer Price: $30,890 :: FOB MI Condition: Good Category: Wall Panel Description: Component Manufacturing Viking framing station with PreStage table. dverti$er M I Framing station model PS-1000, includes S S B C , E W P stud locators (16" & 24" centers), skate wheel ejectors, walk-through aisles, 1/2 HP motor and two powered tool carriages. From the OEM's literature: "Discharge speed of 12" per second. Once staged the framing sequence is event driven: tools fire as the staged assembly enters the framing area from the PreStage table. System allows laborers to work from both the top and bottom chord for increased productivity. Builds walls from 4'-2" to 12'-0" high, in lengths up to 20' long." Sold new for Thomas McAnally - Publisher tmcanally@componentadvertiser.com $132,000. System support and installation 800-289-5627 x1 www.componentadvertiser.com available from the OEM. 480 volt, 3 phase electrical. 16 CFM air at 100 PSI. Tools not included. 1 Page - 12x Rate Advertisers get a Wood Truss Systems 765-751-9990 Second Page FREE! www.woodtrusssystems.com Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982
A
erving the tructural uilding omponents
Our Advertising Rates will
ngineered
ood roducts and
illwork ndustry
Blow You Away!
CALL NOW!
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
September 1st, 2015 #08194 Page #21
Celebrating 30 Years of Softwood Framing Lumber Market Analyses and Forecasts
LAYMAN'S LUMBER GUIDE Matt Layman, Publisher
Week #35
North American Softwood Lumber Market Evaluation
Wednesday August 26, 2015
Another Dimension
Lumber & Housing Market Expectations Cooling In Front of the Approaching Bull Market
Thought Provoking and Inspirational
Common Sense When a bully says he is going to beat you up, and he has a previous proven history of making good on his word, it seems prudent to avoid provoking him. Wouldn't you agree? It seems logical that one would try to avoid confrontations with bullies. Near the top of the list would be, "Do not say things that might embarrass or challenge the bully, and provoke him to wrath." He wants a fight and doesn't need much of a reason. For example, calling a him fat, or telling her she is stupid and ugly, or saying he is poor and smelly... or broadcasting annoying political and social propaganda over loud speakers 24 hours a day...might be unwise. Bullies seek power through abusive and violent language or behavior and are provoked by depriving them of power. Ignoring a bully only causes him to seek more attention. What bullies want is to believe that there is hope for relief from their pain and suffering and anger...not patronized or punished. Our civilization, if you can call it that, creates bullies. We can also stop it any time. It's a choice. Meanwhile, bullies cannot be allowed to run loose, killing people because they get their feelings hurt. That's why I have a conceal carry permit. ...ML
If you are confused and skeptical...join the club. Historical stock market volatility, housing statistics coming out of both sides of the mouth [home ownership down, rents higher, home inventories declining, sales prices rising], strong lumber demand, equally as strong production. Housing sucks because our kids are afraid to invest in one. This week's Layman's Guide "Temperature Check" survey was overwhelmingly consistent. Buyers are adequately covered and will use strong September sales to liquidate inventories. Fall and winter lumber demand expectations are weakening with the stock market. Business "has been" good, however the next six months are uncertain. Producers admit over production and are looking for the other guy to do something about it. Weakness in the global economy has tempered the outlook for the balance of 2015 and early 2016. The combination of lower lumber prices, renewed interest from China, and production curtailments will inspire speculative buying this fall. Prepare for a SIGNIFICANT reversal this fall after this aggressive inventory liquidation creates a premature under bought condition. Looking Forward...ML!
FORECASTED DECISION POINTS (FDP'S), 10-YEAR AVERAGE, LUMBER COMPOSITE
SPOT PRICE Composite 2x4's #2 SYP-E, SPF-W, Dry Hem Fir, Green Doug Fir. (Blue). FDP's (Vertical Red Lines), reversals or accelerations, since 01/99: 398 FDP's…340 turns within 1 week. 85% FDP Historical Accuracy. Green Shade=Highest Demand Weeks #10-25; Yellow Shade=Daylight Savings Weeks #10 Through Week #45; Red Shade = Lowest Demand Weeks #45-09
Lbr Composite FDP Forecast 420 395 370 345 320 295 270 245 220
Lbr Composite 10-‐Year Ave 2013-‐'16
Lbr Composite 2013-‐'15
Layman's Lumber Guide
`` `
Get the complete forecast with a monthly subscription. Click here. www.laymansguide.org
35 39 43 47 51 3 7 11 15 19 23 27 31 35 39 43 47 51 3 7 11 15 19 23 27 31 35 39 43 47 51 3 7 11 15 19 23 27 31 35
LUMBER MARKET HOTWASH is a product of Layman's Lumber Guide Forecasting Suite... Read/Subscribe online at www.componentadvertiser.com FAX: 800-524-4982 Matt Layman, Publisher Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn
PHONE: 800-289-5627
M ACdverti$er omponent
anufacturing
September 1st, 2015 #08194 Page #22
Adverti$er
Don’t Forget! You Saw it in the
LAYMAN'S LUMBER GUIDE
North American Softwood Lumber Price Summary
Matt Layman, Publisher
Week #35
SPOT CHECK
2x4#2 Last Week This Week Change
SYP-E 330 320 (10)
SYP-W 330 315 (15)
SPF-W 275 260 (15)
Wednesday August 26, 2015 Page 2
SPF-E 360 355 (5)
HF 315 310 (5)
(SYP) SOUTHERN YELLOW PINE SYP-East KD 19% 2x4#2 2x6#2 2x8#2 2x10#2 2x12#2 KD 19% 2x4#1 2x6#1 2x8#1 2x10#1 2x12#1 SYP-Central KD 19% 2x4#2 2x6#2 2x8#2 2x10#2 2x12#2 KD 19% 2x4#1 2x6#1 2x8#1 2x10#1 2x12#1 SYP-West KD 19% 2x4#2 2x6#2 2x8#2 2x10#2 2x12#2 KD 19% 2x4#1 2x6#1 2x8#1 2x10#1 2x12#1
R/L 320 290 235 300 465 R/L 360 370 310 340 515
SC, NC 14' 320 280 220 305 375 14' 335 350 305 340 415
& So.VA 16' 18' 320 320 295 295 235 225 300 280 495 465 16' 18' 350 460 370 375 295 310 335 345 545 490
20' 335 305 260 310 650 20' 440 450 410 455 790
R/L 300 300 240 290 480 R/L 355 360 290 345 525
Mill prices in AL, MS 8' 10' 12' 300 280 285 280 310 315 220 230 230 265 285 295 465 435 490 8' 10' 12' 330 315 330 315 340 345 290 300 300 310 335 325 500 450 535
14' 295 300 235 300 445 14' 340 335 270 325 470
16' 315 305 245 300 480 16' 355 350 290 345 530
20' 330 310 260 290 615 20' 410 400 310 420 670
8' 310 285 240 250 480 8' 345 310 280 285 490
10' 285 305 245 260 430 10' 310 330 290 295 460
SPOT CHECK
7/16 OSB Last Week This Week Change
SE 175 180 5
NC 200 210 10
WC 160 165 5
(SPF-W) WESTERN CANADIAN SPRUCE-PINE-FIR
Mill prices in No.FL, GA, 8' 10' 12' 310 310 305 255 300 290 230 245 235 250 310 310 450 395 465 8' 10' 12' 330 320 335 360 360 360 305 320 320 300 335 340 500 420 490
R/L 315 305 250 275 485 R/L 350 330 295 305 505
GDF 330 320 (10)
12' 300 320 260 275 485 12' 320 330 290 295 490
14' 310 315 245 275 455 14' 330 320 285 290 475
16' 365 305 245 275 480 16' 370 320 275 315 515
18' 285 295 255 270 470 18' 410 350 300 330 505
18' 280 305 260 265 470 18' 340 320 305 290 490
20' 340 310 270 275 610 20' 385 355 345 325 650
FOB British Columbia KD 19% R/L 8' 2x4#2 260 235 2x6#2 260 225 2x8#2 290 275 2x10#2 340 315 2x12#2 390 260
10' 230 265 305 350 295
12' 240 260 310 340 415
14' 270 255 265 345 350
16' 280 275 290 320 410
18' 280 275 315 400 485
20' 275 275 325 360 470
(SPF-E) EASTERN CANADIAN SPRUCE-PINE-FIR Delivered Boston (8'-16' R/L tallies) KD 19% R/L 8' 10' 12' 2x4#2 355 345 320 330 2x6#2 365 370 375 360 2x8#2 365 380 380 380 2x10#2 485 465 480 485
14' 355 325 335 495
16' 390 390 375 485
12' 290 280 290 345 365
14' 305 300 295 345 360
16' 355 345 330 370 405
18' 310 320 300 345 380
20' 310 320 300 345 390
12' 305 295 295 385 400
14' 315 305 295 395 375
16' 365 365 350 455 465
18' 330 345 325 425 425
20' 355 345 375 425 470
(HF) WESTERN COASTAL HEM FIR FOB Mill Western U.S. KD 19% R/L 8' 2x4#2 310 260 2x6#2 305 255 2x8#2 305 280 2x10#2 345 295 2x12#2 370 305
10' 285 300 305 300 325
(GDF) GREEN DOUGLAS FIR FOB Portland, OR Green R/L 2x4#2 320 2x6#2 315 2x8#2 315 2x10#2 410 2x12#2 410
8' 275 280 285 300 335
10' 295 315 290 350 365
(GDF) GREEN DOUGLAS FIR LONG LENGTHS FOB Portland, OR Green 2x6#2 2x8#2 2x10#2 2x12#2
22' 465 420 450 410
24' 465 420 450 410
26' 470 425 440 410
28 480 460 445 420
LAYMAN'S LUMBER MARKET HOTWASH is a product of Layman's Lumber Guide Forecasting Suite... Matt Layman, Publisher 145 N. Main St., Cramerton, NC 28032 Phone or Text: 336-516-6684 Email: matt@laymansguide.org www.laymansguide.org Join Matt Layman on LinkedIn PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
September 1st, 2015 #08194 Page #23
Adverti$er
Don’t Forget! You Saw it in the
LAYMAN'S LUMBER GUIDE
North American Softwood Lumber Price Summary
Matt Layman, Publisher
Week #35
STRUCTURAL COMPONENT GRADES
SYP MSR 2x4 2400f 2x4 2100f 2x6 2400f 2x6 2100f 2x8 2400f 2x8 1950f 2x10 2250f 2x10 1950f 2x12 2250f 2x12 1950f SYP Visual 2x4 SelStr 2x4 #1Dns 2x4 #2Dns 2x6 SelStr 2x6 #1Dns 2x8 SelStr 2x10 SelStr
R/L 410 397 432 416 387 363 402 371 589 566 R/L 416 400 348 405 390 356 428
8' 365 360 350 355 310 310 350 320 535 530 8' 365 345 350 345 325 340 530
MSR R/L SYP vs SPF 2x4 2400F 2x4 2100F 2x4 1650F 2x4 #1 SYP 2x6 2400F 2x6 2100F 2x6 1650F
Chicago SYP SPF 440 440 427 420 395 395 462 435 446 420 370
10' 365 360 400 380 410 380 375 340 490 490 10' 370 360 310 400 385 360 365
12' 380 370 405 395 390 360 375 345 595 575 12' 385 375 325 400 385 360 370
Niagara SYP SPF 455 450 442 430 405 405 477 445 461 430 380
All SPF prices reflect Western Canada origins and include 3-4 18 & 20's combined on each car. MSR SPF KD19% R/L Western Mill BC Atl 2x4-2100f 365 440 2x6-2100f 365 440 MSR SPF KD19% R/L Eastern Mill Niagara Atl 2x4 2100f 400 420 2x6 2100f 440 460
14' 410 390 435 395 380 355 375 350 555 535 14' 400 380 325 390 375 345 370
16' 420 410 450 450 370 345 425 390 630 590 16' 420 400 340 410 395 335 575
Minne SYP SPF 445 430 432 410 385 395 467 425 451 410 360
Chi 420 420 Chi 390 435
Wednesday Page 3
18' 495 465 480 450 430 415 430 395 600 565 18' 540 520 450 415 400 350 375
20' 495 465 525 500 430 410 520 495 765 730 20' 520 500 430 490 475 450 300
Detroit SYP SPF 450 435 437 415 390 400 472 430 456 415 365
August 26, 2015
STUDS 2x4x8
SYP SPF-W SPF-E HF Stud Stud Stud #2 285 230 320 265
FL Stud 280
GDF #2 315
R/L 440 469 441 R/L 385 430 419
14' 425 450 400 14' 350 425 425
16' 450 475 440 16' 400 425 400
TIMBERS
SYP East 4x4 #2 4x6 6x6 West 4x4 #2 4x6 6x6
8' 450 475 450 8' 400 425 420
10' 450 450 460 10' 400 410 410
12' 425 475 460 12' 375 450 450
SYP 5/4x6" RADIUS EDGED DECKING
East Std Prem West Std Prem
R/L 407 999 R/L 519
1019
8' 425 900 8' 525 925
10' 425 900 10' 550 925
12' 400 900 12' 500 900
14' 390 770 14' 450 900
16' 410 1190 16' 550 1175
East
West
(OSB) ORIENTED STRAND BOARD FOB MILL 7/16" 23/32" T&G
South
South
East
West
SE 180 315
SW 180 315
North
Mid
Central Atlantic Canada Canada
NC 210 315
MA 205 320
EC 180 275
WC 165 285
You can read Layman’s Hot Wash FREE Every Week Click Here: http://goo.gl/LWgxQN LUMBER MARKET HOTWASH is a product of Layman's Lumber Guide Forecasting Suite... Matt Layman, Publisher 145 N. Main St., Cramerton, NC 28032 Phone or Text: 336-516-6684 Fax: 888-811-6917 Email: matt@laymansguide.org www.laymansguide.org TWITTER.com/Laymansguide Join Matt Layman on LinkedIn PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
September 1st, 2015 #08194 Page #24
WALL PANEL EQUIPMENT
WALL PANEL EQUIPMENT
Wright Panel Lift and Hoist Assembly (Bridge Crane Assembly) Wright lift and hoist assembly . Includes (2) 1.5 HP trolley motors, (4) 500 lb. capacity hoists, capacity (1) ton. Was used for transferring wall panels to 12 feet in height. Distance between the hoists is 13'-6" x 8'-0", the travel distance is 50 feet and the vertical travel distance is 15 feet. See video for demonstration. 220 volt, 3 phase electrical. Price: $9,990 :: FOB WA Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Viking Framing Station Viking 38’ framing station with walk through design includes H.D. stud locators (16” & 24” centers), skate wheel ejectors, Powered tool carriages with three (3) tools per side, Auto-Plate Stops, and dual operator controls. Once staged the framing sequence is event driven, including 2x4 or 2x6 material size System allows assemblers to work from both the top and bottom chord for increased productivity. Builds walls from 4' to 12’-0” high. System support, and installation available from the OEM. 480 volt, 20 Amp, 3 phase electrical. 15 CFM air at 100 PSI. Price: $43,990 :: FOB OH Wood Truss Systems 765-751-9990
NEWS FLASH! NEW PortaFramer 16' x 7'-9" to 10'-6" Trailer Mounted Wall Framer 2" Ball Coupler. Safety Chains with Hooks. 2,000 Lb Jack with Wheel. Wheel Fenders. 12" White Spoke Wheels. Primed & Painted White. Galvanized Platform Stands. Galvanized Rollers & Cross Members. Stainless Steel Guide Pins on 16" Centers. Stainless Steel Air Cylinders. Stainless Steel Push-In Air Line Fittings. Water Separator & Regulator with Gauge. $15,000 FOB MO. Wasserman & Associates 800-382-0329
Carlson 9' x 16' Wall Panel Line •Framing Table with Stud Locators, Skatewheel Conveyor & Pneumatic Plate Clamping •Squaring Table with Router Bridge •Sheathing Table with 16 Tool Panel Bridge •Excludes Bostitch Nail Guns on Panel Bridge •Triad CN-4 Sub-Component Nailer $14,900 FOB PA Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
We stole a Sneak Peek at the NEW Single Tool Sheathing Station VIDEO: http://goo.gl/rzOQ10 Don’t tell Panels Plus!
2007 Hain 12' x 20' Framing Table Wall Lengths up to 20’. Powered Height Adjustment (8’ to 12’ wall heights). Single Gun Tool Dollies. Includes 2 Bostitch F21PL Nail Guns (21 Degree, Plastic Collated). Pop-up Skatewheel Conveyor. Ball Screw Telescoping System (Repeatable to .015”). Retractable Plate Clamps. Movable Single Rail Sill Support. Movable Double Rail Header Support. 110 Volt / 1 Phase. Lightly Used (Dirty and Minor Surface Rust from Long Term Storage) $19,500 FOB NE OPTIONS Add $1,250 for Used IBS Handle Bar Router Add $3,500 for IBS Component Tables with Pop-up Skatewheel Conveyor Add $360 for 1 Pair of 10’ Skatwheel Conveyor Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982
Toll Free 800-382-0329 www.wasserman-associates.com
WizardPDS®
drop-in Channels™ Old technology turned state-of-the-art with WizardPDS® drop-in Channels™ Your table + our technology = Zero Set up time and NO manual jigging.
Retro fit now - own it in 6 months!
M ACdverti$er omponent
anufacturing
Adverti$er Toll Free 800-382-0329
Don’t Forget! You Saw it in the
September 1st, 2015 #08194 Page #27 WALL PANEL EQUIPMENT
www.wasserman-associates.com
$59,000 FOB MO
Monet DeSauw Framing Table with Panel Bridge FRAMING TABLE Lengths to 16' (additional length available in 4' increments) Powered Height Adjustment (8' to 12' wall heights) Pop-up Skatewheel Conveyor Fixed Squaring Stops Excludes Tool Dollies
PANEL BRIDGE Programmable Fastener Patterns with PLC Touch Pad Entry Bridge Auto Return Bridge Tilt at Sheathing Seams Laser Pointer
OPTIONS Add $950 for Stud Locators at 16" & 24" O.C. Add $1,750 for Handle Bar Router Add $1,250 for Wall Panel Lift (Excluding Hoist) Add $1,500 for 1 Pair of 15' Skatewheel Conveyor with Stands Add $3,750 for Sub-Component Layup Tables
Includes Installation Support in the United States & Canada
PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
Carlson Sub-Component Nailer Infeed/Outfeed Roller Conveyor. 3 Mounted Senco Nail Guns & 1 Loose Senco Nail Gun. $4,000 FOB MO. Wasserman & Associates 800-382-0329 www.wasserman-associates.com TRUCKS & TRAILERS
Load Lifter T-40 Yard Carrier The T-40 Modular Yard Carrier can easily move a modular building off your production line to your staging area in minutes. 50,000 Lb Capacity. 70' Main Rail Length (78'-6" Overall Length). 20" Vertical Lift. 18 HP Gas Engine Power Unit for All Hydraulics. Rear Lift: Six 5 x 20 Cylinders. Pintle Hitch Coupler. Running Gear: Six 20,000 Lb Heavy Duty Agricultural Spindles & Hubs FOB NE:: $19,500. NOW $18,900 Wasserman & Associates 800-382-0329 www.wassermanassociates.com
2015 Precision Equipment Roll-Off Trailers 40', 48' and 53' Fixed Lengths. 36' to 51', 42' to 60', 46' to 64', 50' to 70' and 53' to 80' Expandable Lengths. 102" Wide. Air Lift ICC Bumper. Self Contained Hydraulic Power Unit. Spring Loaded Composite Fenders. Dual Rear Rollers. New Low Pro Tires. Air Operated Roller Pin Lock System. Air Operated Load Control System. Sliding Air Ride Suspension. Strobe Lighting. Mesh Between All Rollers. Patented Load Lifts. LED Lighting System. Extenda-Rail. 4" x 35' Load Straps. Patented Strap Locks. Strap Winches. Dove Tail on Rear of Trailer. Hydraulic King Pin Plate. Removable Headache Rack. 7 Way Receptacle on Rear of Trailer. Split Rollers. Sliding Winch System. Aluminum Tool Box. Trailer is Sandblasted & Primed with PPG Polyurethane Paint Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
You Saw it in the
TRUCKS & TRAILERS
TRUCKS & TRAILERS
2000 Prentice Telestik-33 Material Handler 32’-10” Boom. 4,000 Lb Payload. Excludes Truck. $10,000 FOB GA. NOW $8,000 Wasserman & Associates 800-382-0329
2004 Hot Shot 43' Roll-Off Trailer Hydraulic Raised Roller Bed. GVWR: 24,000 Lbs. Tandem Axle. Tires: 23516. Electric Brakes. Headache Rack. Manufactured by R & R Truck & Trailer (7-26-04). $9,500 FOB IL. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
1990 Ford F800 Truck with 1982 Barns Truss Trailer
•Low Mileage Unit in Good Condition FANTASTIC DEAL! $9,900 FOB CA Wasserman & Associates 800-382-0329 www.wassermanassociates.com
A
Component Manufacturing dverti$er
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Adverti$er
Don’t Forget!
1999 Haulin 48' Roll-Off Trailer Leaf Suspension with Tandem Sliding Axle. Hydraulic Lift Neck. Air Pin Locks. DOT is Current (March 2015). Air Brakes with ABS. Brakes are 50%. Tire Size: 25570R22.5. Tires are 6/32” to 14/32”. Hub Meter. Some of the cross members have rust holes. $13,900 FOB MN. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Tell Them You Saw it in the
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
September 1st, 2015 #08194 Page #28
MISC.
MISC.
2010 USIFAB Roof Truss Vertical/Flat Stacker Price: $63,980 :: FOB QC Condition: Good Category: Material Handling Description: 90 foot long, 3-station single/dual/tandem, peak-up, hydraulic powered roof truss stacker with electrical control panel and remote control for operator use. System includes 90 feet of conveyor capable of travel speed up to 140 feet / minute. Nine (9) arms rotate to 90 degrees for Peak-Up stacking, plus lateral transfer on opposite side for flat stacking. 15 GPM hydraulic unit with 15 HP electric motor. Professionally manufactured by USIFAB R. L. Inc. (www. usifabrl.com). Currently wired for 600 V, 3 phase electrical power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2009 EnDiSys / Graco Foam Insulation System EnDiSys Model 3004240B. Skid Mounted Graco Reactor H-25 Hydraulic, Heated, Plural Component Proportioner. Maximum Flow Rate: 22 Lb/Min. Maximum Fluid Working Pressure: 2,000 PSI. Reactor Portable Dispense System (Manual Contol). 230 Volt / 3 Phase. Two 100 Gallon Heated Tanks. Drum Agitators (Both Sides). Feed Pumps. Recirculation System for Hose and Reactor. 150’ Heated Hose with 10’ Whip. Out of Service (Stored Inside). $19,500 Now $17,000 FOB NE Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Cullen Model A40-2 Generator Set Detroit 12V-92 Engine.Capacity: 400 KW Capacity.Output: 120/208 Volt - 1388 Amps - 3 Phase..Control Panel..Skid Mounted..1,200 Hours. 30,000 FOB BC. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Metriguard Finger Jointing Testing Equipment •Metriguard Model 330 Press. •Humboldt Model H-30140 Laboratory Oven (115 Volt). •Pressure Pump & Vessel. •Lightly Used. •Excludes Associated Machinery Material Cart. $6,500 FOB NE Wasserman & Associates 800-382-0329 www.wasserman-associates.com
www.mitek-usa.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
MISC.
Adverti$er Wages and Productivity Don’t Forget! You Saw it in the
September 1st, 2015 #08194 Page #29
For many companies, properly staffing and retaining employees to meet their needs is a never-ending struggle. Let’s summarize what human resources gurus require years of training to understand and disseminate it to the masses for better results.
2008 OMGA Finger Jointing Line Price: $29,900 NOW $24,900:: FOB CO Model FJL100M, refurbished by Monet in 2010. This complete system includes OMGA JL 100M finger joint cutting head, shaper unit, OMGA PR 100/3.2 hydraulic press, OMGA INK F-100 glue station, and TITEN finish planer of unknown age, used for producing finger joint stud material from cut off scrap material. 480v, 3Ph power. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
2010 Monet DeSauw Wood Finger Jointing Line Cut-Off/Shaper Unit with 5 HP Saw to Cut-Off Angles & 25 HP Cutter Head to Fingerjoint Ends. Delta 2 Bag Dust Collector. Glue Station with Apquip Glue Applicator & 6 Gallon Glue Pot. Hydraulic Finger Joint Press with Cut-Off Blades (2x4 and 2x6 Lumber). 480 Volt / 3 Phase. Save $$ on Disposal Fees, Earn Profit on Waste Material & Produce Straight Lumber. $58,900 NOW $52,500 FOB IL Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Let us start by understanding some basic truths about productivity. If there is an inadequate output and/or quality issue, then the two leading factors are usually not enough employees and/or poorly skilled employees. Some companies cannot attract enough new employees, or when they do they have poor retention of employees, which both lead to an employee shortage. As a result of low employee retention, a company’s Todd Drummond staff is often poorly trained or not skilled enough, which leads to many mistakes. Todd Drummond Consulting Industrial engineers are taught that most skilled positions take an average of three years www.todd-drummond.com of experience to reach full potential. Experienced workers not only produce more units per hour but also higher quality units with fewer mistakes. So, how can any company reach maximum output if it has a high percentage of new employees with very little experience? The answer is simple: It cannot. If most companies actually retained their new hires, most would be fully staffed with long-term employees within just three years. Some think money is the number-one way to retain good employees; however, this is a mistake. Many human resources surveys over the years have shown the same results; when asked about the most effective motivation for keeping employees satisfied, survey results rank contributing factors as follows: 1st. 2nd. 3rd. 4th. 5th. 6th. 7th. 8th. 9th. 10th.
Appreciation of work well done Being part of the discussions Help with personal matters Job security Good wages Interesting work Promotion and growth Management loyalty to employees Good working conditions Tactful discipline
Notice how good wages is positioned 5th place in this ranking? Similar surveys all find the same results: Wages are normally the 4th or 5th in a list regarding employee satisfaction. However, if a company has a high turnover rate and high employee vacancy, the number one reason is usually the company is not paying the correct market wages for the given positions. There are two very distinct aspects of employee pay rates. 1st. Market Wages • Employer’s responsibility to attract and retain the right employees • Potential employees will not apply for the position if not met. • Employee will eventually leave for better-paying positions with other companies if not met. • Employee performance will suffer if not met. 2nd. Employee Wage Needs • Employee’s responsibility to meet their own obligations, not the employer’s • Employees will eventually find other employment to meet monetary needs • Employers will find other employees to fill the position at market wages
To meet the first two most important things employees desire—appreciation of work well done and being part of the discussions—a manager needs to actually take the time to let employees know how they are doing and what is going on. To put it simply, managers need to praise the good work employees do, communicate what good work is, and Hain 20' Powered Measuring System communicate what the company is doing overall. As part of the communication process, many are surprised that, when •Adapts to Any Saw talking about future investments in equipment or other mundane things managers would normally never discuss with •Left or Right Hand Operation •Feet & Inches System (Stops at 12” employees, employees respond with a great deal of enthusiasm because the managers took the time and displayed an Centers) or Inches System (Stops at 10” appreciation of them being part of the discussion. The “being part of the discussion” aspect is normally the one thing most managers fail to do the most. A daily walk-around while having brief conversations with all employees can go a Centers) •Motor: 1/4 HP Linear Actuator (110 Volt) long way to improve morale. •Stop Rail: 2 x 4 x 1/4” Aluminum Extrusion •Stops: Jig Bored Steel •Stop Blocks: Machine Billet Aluminum •Optional Lengths from 5’ to 60’ •Optional Gang Stop •Add $770.00 per 10’ Section of Heavt Duty Roller Conveyor with Stands Wasserman & Associates 800-382-0329 www.wasserman-associates.com PHONE: 800-289-5627
Every company has its own unique culture and way of doing business. In the end, it is about making the best net profit possible in order to survive and thrive. Without profit, there would be no business. And no matter how many investments are made in automation, employees play a key role in making everything work. But take heart: Wage expenses can actually decrease as a percentage of sales if productivity increases. That is quite common for the best companies that display the best net profit: These well-performing companies display very low employee turnover, few vacancies, and performance at the highest productivity with very few mistakes.
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
WE DI DN’T Component Manufacturing Don’t Forget! J UST WEATH E R dverti$er You Saw it in the Adverti$er MISC. MISC. TH E STOR M.
A
September 1st, 2015 #08194 Page #30
Toll Free 800-382-0329
W e helped
www.wasserman-associates.com
PART TH E CLOU DS. 2008 AeroGo Load Beams Invicta DGI-40 16" Air Caster Load Beams (for moving Single Surface Planer (Used) modular home sections). Two Aero-Caster •15 3/4” x 8 1/2” Capacity Load Modules connected by an Adjustable •25 & 46 FPM Feed Speeds Telescopic Tube. Lightly Used (Once or •5,000 RPM Cutterhead Speed Twice). Capacity: 7 Ton Each. 36 Load •7 1/2 HP Motor Beams Available. $49,500 for all or $1,525 •230 Volt / 3 Phase each. FOB AL. •Powered Raise & Lower of Table Wasserman & Associates $4,000 FOB WA 800-382-0329 www.WoodTrussSystems.com Wasserman & Associates www.wasserman-associates.com 800-382-0329 www.wassermanassociates.com
Matching you with the right wood component equipment. New or used. Through thick or thin. 765-751-9990
2007 Univeyor Automated Linear Conveyor System
_WTS_WOOD _TRUSS_AD_2.25X4.75_v2.indd 1 12/15/14 Just-in-time delivery of cut material packages via automated linear conveyor, delivering banded packages to four-stations over a 103' production area. Features a Signode HB 4300, semiautomatic plastic strapping station with foot control to strap truss packages which are delivered to an operator selected station via Univeyor conveyor system consisting of medium duty chain driven live rollers at a rate of 40' per minute. Weight of cut material package can be up to 800# and up to 20' long. Includes (1) 40' continuous strand chain driven conveyor, (1) 18' continuous strand chain driven conveyor, (1) 22' continuous strand chain driven conveyor, (1) 19' continuous strand chain driven conveyor, (4) right angle transfers, (4) skate wheel tracks, (2) 48" non-powered gates, and all available safety equipment, light towers, controls, e-stops, and motors. System includes top-loading, gravity-fed trays for pre-picked connector plate delivery to lumber package stations . Allen-Bradley controls, 575v, 3 phase power. Includes all shop drawings and layouts, system is installed and under power for inspection by prospective buyer. (System was over $140,000 new in '07).
$88,990 NOW $79,990:: FOB BC 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
2011 Todd Saw Notch & Drill System
• PLC Control to Drill, Notch & Cut up to 5 Boards at once • 2x4 thru 2x10 up to 16’ in length • Automatic Advancing Infeed Table • Notch from 3/4” to 3 1/2” deep with a minimum notch width of 3” at different locations • Drill at different heights and locations 7:42• AM34” Diameter Saw Blade • 16” Diameter x 3” Kerf Notcher Blade • 1 1/2” Maximum Boring Bit • 600 Volt / 3 Phase / 60 Amps • Excludes: Optional Infeed & Outfeed Lift Tables & Lumber Carts $75,500 FOB CO. MISC.
Dayton Electric Hoist with Trolley 1/2 Ton Electric Chain Hoist. Chain Container. 1 Ton Trolley. 10’ Lift. 32 FPM Lift Speed. Push Botton Pendant Control. 115-230 / 1 Phase - 1 HP Motor. 2 Available at $900 Each. Wasserman & Associates 800-382-0329 www.wassermanassociates.com
Read/Subscribe online at www.componentadvertiser.com
MISC.
Sullair ES-8 Screw Air Compressor/Tank/Dryer Sullair 20 HP model ES-8 screw type air compressor with Large 200 PSI tank and Sullair SR-175 air dryer. $8,890 FOB OH. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
Adverti$er
Don’t Forget! You Saw it in the
MISC.
MISC.
Door & Stair
September 1st, 2015 #08194 Page #31 Door & Stair
Wood Truss Systems
inc.
MANUFACTURERS’ REPRESENTATIVES
New SL Laser Projection System New, laser projection system from SL Laser. Projects roof truss, floor truss and wall panel design images accurately onto building surface, for faster setup and fabrication times. Each laser head provides 21' projection length (@15 foot ceiling heights). Includes system computer, cables, mounting hardware for attachment to customer's structure, factory installation, training and choice of green or red laser. Works with each connector plate manufacturer's design software. Modular nature of the laser heads allows for easy, future expansion of system length. 120 volt, 1 phase. FOB NC Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Ruvo 2200 Stair Saw Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time. The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical. Spindle motors are either new or rebuilt. The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied. Installation by the OEM is available at an additional charge. Wired for 230 volt, 3 phase and 30 amp electrical service.
$22,677 FOB FL | AS NEW
765-751-9990 www.woodtrusssystems.com New Square 1 Rolsplicer New 2014 Square 1 Rolsplicer splices 2"x3", 2"x4" and 2"x6" lumber with a 3-4 second cycle time. Presses the lumber together prior to imbedding plates. Features two, recessed, simultaneous-activation buttons, guarded motor and sprockets, external lubrication points, 3 HP motor and a footprint of 59" long x 42" wide. Optional 20' infeed and 10' outfeed conveyor available. 240 or 480 volt electrical. $15,500. FOB IN Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Four Arm Infeed Deck Price: $7,890 :: FOB PA Condition: Fair+ Description: 10' long x 10' wide 4-arm infeed deck, powered by a 1 HP motor, prism chain feed and deflector pans. 230/460 volt, 3 phase. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com PHONE: 800-289-5627
2001 MiTek Ready-Feed Lumber Conveyor Feeds 4’ to 20’ material on an extended 30’ length, five-chain in-feed at 25’ fpm. HD 15,000 lb. capacity, 230/460v 3Ph, 3 H.P. Motor, with foot pedal forward and reverse control. This unit has always been inside and the appearance is especially good. Price: $8,890 :: FOB KY. Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
A
2003 Triad Smart Stair Router System CNC (computer numeric controls), menudriven machine cuts 2x10 & 2x12 standard stair profiles w/touch screen controls. Two HD routers cut top or bottom stringer only, or both stringers simultaneously. Smart Stair Router accommodates standard stair profiles, no riser profiles, split stringers & open stringers with hardwood or softwood settings; cuts top or bottom stringers or both simultaneously. Features (2) HD 2 HP belt driven routers w/1/2" capacity collets, (2) stepper linear actuators for cutting profiles, (1) servo/stepper drive wheel for indexing, 628 lb. vertical clamp, 352 lb. horizontal clamp, industrial computer, and 4-axis motion controller. System includes 2260 Wedge & Glue Block Cutter to mix stacks of 1x and 2x materials in the same hopper. Cuts (2) wedges out of 1x material and (1) wedge out of 2x material w/walkaway hands-free operation. Capable of cutting glue blocks; bag-style dust-vacuum system included. Includes Triad stair assembly clamp for easy jigging of staircase assemblies. Accomodates up to 16 risers with a maximum width of 50". Price: $52,750 $47,750 NOW $32,750 FOB PA Wood Truss Systems 765-751-9990
BAM CNC Stair Router Saw Reman 03/08. Builders Automation Machinery [BAM] model CNC/MFSR stair router. Contemporary, box & open stairs, the only machine available that also cuts the top and bottom landings. Programmable with a large library already in the machine for most all box and open stringers. Remanufactured includes new wiring, rebuilt spindle motors, new drives & is equipped with two variable frequency drive, 5 horsepower, 3 phase motors. One year warranty. Setup is free of labor charges we do charge airfare and per diem for setup and training. Portable 4 bag, 3 phase vacuum switched on at the machine omponent anufacturing controls is available for $1,568. Installation by the OEM available at an additional charge. 230 volt, 3 phase, 60 amp electrical B C ,E W P M I requirements and 120 p.s.i. and 35 CFM air requirements. Price: $56,667 :: FOB FL Wood Truss Systems 765-751-9990 Read/Subscribe online at www.componentadvertiser.com
C M dverti$er
Serving the Structural
uilding omponents
ngineered
ood roducts and
illwork ndustry
Norfield Vertical Door Loader 2,800 Lb Capacity. 48" Stack Height. 480 Volt / 3 Phase. Location: TX. $7,900.00 Wasserman & Associates 800-382-0329 www.wasserman-associates.com
2002 Builders Automation Template Stair Router Model RUWO 2000 MFSR. Cut Box and Open Stringers. Manual Setup with Auto Feed and Cut. One or Two Stringers per Cycle. 10’ Infeed and 10’ Outfeed Roller. Conveyor with Stands. 2 Bag Dust Collector. (2) Lift Tables for Staircase Assembly. 240 Volt / 3 Phase. $25,600 FOB NE. Wasserman & Associates 800-382-0329 www.wasserman-associates.com
RUVO Model 925 Door Machining Center Interior & Exterior Door Machine will automatically: bore for the main lock hole. bore for the latch hole. rout for the rectangular latch plate. bore for the strike hole. rout for the rectangular strike plate. mortise for two or three hinges in both door & hinge jamb. Specifications: Door Height: 6’-6” to 8’-0”. Door Width: 1’-4” to 4’-0”. Door Thickness: 1 3/8” or 1 3/4”. Butt Sizes: 3 1/2”, 4” or 4 1/2”. Jamb Width: 2 1/2” or 10 1/2”. Wasserman & Associates 800-382-0329 www.wasserman-associates.com FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
September 1st, 2015 #08194 Page #32
Adverti$er
Don’t Forget! You Saw it in the
Door & Stair
Door & Stair
Norfield Magnum Door & Jamb Machine •Door Sizing/Beveling •Lock & Latch Drilling •Hinge Butt Routing in the Door & Jamb •Faceplate Routing up to 1 1/8” x 2 3/4” •Air Predrill & Air Screwdriver •Width: Doors to 4-0, Jambs to 10 1/2” •Height: Doors to 8-0, Jambs to 8-0 •Thickness: Doors to 1 3/4”, Jambs to 1 1/8” •Butt Sizes to 5” x 5” •Butt Spacing: Infinitely Variable •Lock Backsets from 2 3/8” to 5” •230 Volt / 3 Phase $8,000 FOB WA Wasserman & Associates 800-382-0329 www.wasserman-associates.com
B.A.M. CNC Stair Router System Builders Automation Machinery model CNC/MFSR, 4-axis SERVO stair router. Produces contemporary, box and open stairs. The only machine available that also cuts the top and bottom landings. Fully programmable via system touchscreen w/large library already stored in the machine for almost all box and open stringers. This is a complete system with stair-clamp, Weg Saw and optional Vacuum dust collector. Two high-frequency, 5 H.P., 24,000 RPM fan-cooled spindles horsepower, Installation and support OEM available at an additional charge. 230v, 70 amp, 3 ph., electrical requirements and 110 p.s.i. @ 15 CFM air requirements. One owner, purchased new and installed by OEM. $40,890 :: FOB OH Wood Truss Systems 765-751-9990 www.woodtrusssystems.com
Parts house
Parts House POST PARTS FOR SALE FREE!
All truss industry equipment parts ads are FREE, including machinery that is “For Parts Only” Submit your ads with one photo, not to exceed 750k to: tmcanally@componentadvertiser.com or Call: 800-289-5627 x 1
(2) Used Triad Stud Locators mounted to (1) Bracket (30 Available) $45 Each (Nebraska) Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Parts house
new equipment showcase Used Bimba 314-DXP Air Cylinder (9 Available) $20 Each (Nebraska) Wasserman & Associates 800-382-0329 www.wasserman-associates.com
800-382-0329
2000 Auto-Omni 5 Blade Automated Component Saw (For Parts or Repair) $12,900 (Alabama) Wasserman & Associates 800-382-0329 www.wasserman-associates.com
Autozen Automation
Truss Equipment
Service and Parts
Monet DeSauw FWA 500 Floor Web Cutter
•Push Button Powered Blade Angulations •Single Push Button Setting for 2 Blades per Side •Electronic Digital Readouts •Backup Mechanical Indicators •Cuts 4 Angle Webs, Cantilever Webs (2 piece webs) & Square Blocks •Magazine Lumber Feed for 3x2, 4x2 and 6x2 Lumber •12 1/2” to 48 1/2” Length Capacity (7” Minimum on Square Blocks) •60 Pieces per Minute •(4) Internal 16” Blades & (1) External 16” Cut-Off Blade •Pneumatic Blade Brake on External Blade •Dust Hoods •Vibrating Waste Conveyor (under saw) •Add $3,600 for 12’ Incline Waste Conveyor (adjacent to saw) •Add $1,700 for Extra Set of Blades •Single Sided Setup is available at Additional Cost •480 Volt / 3 Phase
$48,000 FOB MO
www.wasserman-associates.com PHONE: 800-289-5627
On Site Service and Repair
• • • • •
817-666-0880
Automills ALS 275, 276 and 286 SpeedCut Saws Manual Saws Automated/Manual Tables • Coast to Coast
• • • • • •
Maintenance Contracts Remote PC Support PC Repair Installations De-installations Servo Motor/Amplifier Rebuilding
www.AutozenAutomation.com
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
M ACdverti$er omponent OMPONENT
anufacturing ANUFACTURING
st September 1th 2015 February 10 ,, 2012 #08194 #05130 Page #33 PAGE #32
Adverti$er Hoy Puede que Oiga, pero Mañana No
Don’t Forget! You Saw it IN in THE the YOU S AW IT
Safety First! Safety Meeting Topics From State Fund CA.
Noise - Hear Today Gone Tomorrow Most workers take good hearing for granted. Hearing loss can happen so gradually that it can go unnoticed until it’s too late. Then, even a hearing aid may not help. Some assume hearing loss is the unavoidable result of getting older, yet most hearing loss is due to noise over a lifetime. While loss of hearing may result from a single exposure to a noise or explosion, such traumatic losses are rare. Most cases of hearing loss begin gradually in frequencies slightly above that of human speech and then subtly spread to lower and higher frequencies. Hearing loss can disrupt job performance, cause stressrelated problems, increased heart rate, fatigue, irritability, tension and lead to unnecessary accidents or injuries on the job. The workplace can be very noisy. Both the amount of noise and the duration of exposure determine the ability to damage hearing. Workers may be exposed to noise from many sources: equipment, vehicles, or tools, to name a few. Any of these things can damage hearing when exposure accumulates over extended periods of time. How can you tell if work is too loud and may be causing hearing damage? It’s too loud if: •
You have to raise your voice to be heard.
•
You can’t hear someone less than two feet away without shouting.
•
Speech around you sounds muffled or dull after you leave a noisy area.
•
You have ringing in your ears after exposure to noise.
What can employers do to prevent their workers from developing hearing problems? Good planning can prevent problems caused by excessive noise exposure. Noise reduced at its source should be the first consideration. Employers should invest in noise-controlled equipment. When purchasing, employers can ask vendors if there is a "quiet" model or a noise-reducing option, such as enclosed or acoustically lined vehicular cabs and equipment. Work schedules can be adjusted so that exposure to high noise levels does not occur for the entire work day. This allows a noise recovery period to be part of the work shift. Equally important is the use of personal protection devices, such as ear plugs and ear muffs. Employers should provide training on the protection devices available and the effects of noise on hearing if workers do not use the protection. Training should include the fit, use, and care of any hearing protection device. Employers can’t always prevent noise, but they can lessen the chance of workers experiencing hearing loss by having them follow established safety procedures and enforcing the use of proper hearing protection. Don’t risk losing a worker’s hearing on the job. Silence may be a great thing, but not when its permanent.
La mayoría de los trabajadores presuponen que tienen buena audición. Pero la pérdida de la audición puede ocurrir de manera tan gradual que a menudo éstos no se dan cuenta hasta que es demasiado tarde, cuando ya no es posible solucionar el problema ni siquiera usando audífonos. Algunos piensan que la sordera es el resultado inevitable de la vejez, aun cuando la mayoría de los casos de pérdida de la audición se debe a la exposición continua a ruidos, y no al pasar de los años. Si bien la pérdida de la audición puede ser el resultado de una sola exposición a un ruido o explosión, este tipo de traumatismo es poco frecuente. La mayoría de los casos de pérdida de la audición comienza gradualmente, afectando la gama de frecuencias ligeramente superiores a las de la voz humana, y más tarde expandiéndose a las frecuencias por encima y por debajo de la mencionada gama. La pérdida de la audición puede afectar el rendimiento del trabajo, ocasionar problemas relacionados con estrés, aumentar el ritmo cardíaco y causar fatiga, irritabilidad y tensión, los cuales conducen a accidentes y lesiones innecesarias en el trabajo. En ciertos casos, el lugar de trabajo es muy ruidoso. Tanto la cantidad de ruido como la duración de la exposición determinan la probabilidad de las lesiones auditivas. Los trabajadores pueden estar expuestos a ruidos provenientes de muy diversas fuentes, como por ejemplo, equipos, vehículos y herramientas. Cualquiera de estas fuentes de ruido puede afectar la audición si la exposición se acumula sobre largos períodos. ¿Cómo se puede determinar si el ruido en el trabajo es demasiado intenso y puede ocasionar lesiones auditivas? El ruido es demasiado intenso si: •
Usted tiene que subir el tono de voz para que lo oigan.
•
No puede escuchar a alguien que habla a menos de 2 pies (60 cm) de distancia a un tono de voz normal.
•
Escucha sordas y apagadas las voces a su alrededor tras abandonar el área ruidosa.
•
Le zumban los oídos después de haber estado expuesto al ruido.
¿Qué pueden hacer los empleadores para evitar que sus trabajadores sufran problemas auditivos? Una buena planificación puede prevenir los problemas causados por una excesiva exposición al ruido. La principal preocupación debe ser reducir las fuentes de ruido. Los empleadores deben invertir en equipos que emitan un nivel de ruido moderado. Al realizar las compras de los equipos, los empleadores pueden preguntar a los proveedores si existe un modelo "silencioso" o una opción reductora de ruido, como por ejemplo, cabinas de vehículos y equipos cerrados o con revestimiento acústico. Los turnos de trabajo pueden ser ajustados de manera que la exposición a los niveles de ruido intensos no ocurran durante toda la jornada laboral. Así, parte de la jornada se utiliza como período de recuperación tras la exposición al ruido. De igual importancia es el uso de dispositivos de protección personal, tales como tapones y protectores para los oídos. Los empleadores deben ofrecer capacitación sobre el uso de dichos dispositivos y sobre las consecuencias a nivel auditivo que pueden sufrir los trabajadores de no usar este tipo de protección. La capacitación debe incluir la colocación, uso y cuidado del dispositivo de protección auditiva. Los empleadores no siempre pueden impedir el ruido, pero sí pueden reducir la probabilidad de que los trabajadores sufran la pérdida de la audición, haciéndoles seguir los procedimientos de seguridad establecidos y exigiendo el uso de dispositivos de protección auditiva apropiados. No se arriesgue; un trabajador podría perder la audición a causa del ruido en el lugar de trabajo. El silencio a veces es muy agradable, pero no cuando es permanente.
The evaluations and/or and/or recommendations recommendations are are for for general general guidance guidance only only and and should should not not be be relied relied upon upon for for legal legal compliance compliance purposes. purposes. They The above above evaluations They are are based on the the information information provided discussed. We We do do not not make make any any warranty, warranty, expressed expressed or or based solely solely on provided to to us us and and relate relate only only to to those those conditions conditions specifically specifically discussed. implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards. PHONE: 800-289-5627 online at www.componentadvertiser.com FAX: 800-524-4982 PHONE: 800-289-5627 RRead/Subscribe EAD/SUBSCRIBE ONLINE AT WWW.COMPONENTADVERTISER.COM FAX: 800-524-4982
The
JobLine
.com
Careers in the Truss, Wall Panel
and Engineereed Wood Components Industry
JobLine Hiring Zone Job Opportunities Available Candidates
JobLine.com, inc.
800-289-JOBS
The
JobLine.com, inc.
The
800-289-JOBS
www.thejobline.com
job opportunities available Truss Designer Central Texas. ID: J12723 https://goo.gl/Bm3Ox3 Truss Designer Texas ID: J12726 https://goo.gl/TlFaMJ Outside Sales MD/Northern VA ID: J12725 https://goo.gl/c8h8KW Location Manager in Training - Truss GA ID: J12716 https://goo.gl/KJlphu
Job Hunting? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service STRICTLY CONFIDENTIAL!
Candidates seeking jobs: theJobLine.com, Inc.
The JobLine specializes in recruiting and placing professionals in the LBM, Engineered Wood Products, Truss, Wall Panel, and Modular industries. A s t h e C a n d i d a t e ’s intermediary, our process is unique, doesn’t require a resume, and only presents a you to an employer if you approve. To be considered, every candidate must create and maintain a JobLine Candidate Profile. It’s easy and on line. Just click on the New Candidate tab at the top of the page. Take your time and be thorough. It’s a tool for your future! You can create, save, and update at any time. You can also specify your job, location, and compensation goals. Our Recruiters are personally committed to helping you find opportunities that fit your goals.
To register as a New Candidate, visit www.thejobline.com and click on the New Candidates tab. Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627
September 1st, 2015 #08194 Page #35
Truss Designer with Panel and EWP/I-Joist experience Northeast ID: J12724 https://goo.gl/ylHNE2 Truss Designer with Panel and EWP/I-Joist experience Northeast ID: J12712 https://goo.gl/2SA7oc Outside Sales - Truss Atlanta J12722 https://goo.gl/VDRUR5 Production Manager - Truss/Panel Upper Midwest ID: J12719 https://goo.gl/gMPCaY Truss Designer - MiTek/Multifamily Texas ID: J12721 https://goo.gl/iAOQZV Truss Design Manager - Multifamily Texas ID: J12720 https://goo.gl/Zkwtu0 Multifamily Truss Designer ***Promotion Opportunity*** South ID: J12718 https://goo.gl/vmmeBe Truss Designer GA ID: J12717 https://goo.gl/MQZWR0 Truss Designer Northeast ID: J11700 https://goo.gl/aQE3HP Senior Multifamily Truss Designer Southeast ID: J12714 https://goo.gl/wCA4uh Light Gauge Steel Wall Panel Designer Colorado ID: J10666 https://goo.gl/ChhC6B Truss Designer Mid-Atlantic ID: J10655 https://goo.gl/1onRrz Multifamily Truss Designer East ID: J10662 https://goo.gl/CSH668 Inside Sales / Truss Designer Midwest ID: J10500
https://goo.gl/KcYQ0c Truss Designer / Senior Truss Designer Southwest ID: J11689 https://goo.gl/QiEv10 Senior Designer - Truss North Carolina ID: J10651 https://goo.gl/uXQf3f Regional VP - Truss Division Western US ID: J12709 https://goo.gl/eGsE0q Truss Designer - Single Family Tract AZ ID: J12702 https://goo.gl/PXH85a General Manager - Truss Midwest ID: J12707 https://goo.gl/HtdofH Senior Truss Designer / Design Manager Midwest ID: J10649 https://goo.gl/jLygFB Truss Designer - Multifamily/Single family Colorado ID: J11694 https://goo.gl/sLEhDe Truss Designer & Panel Designer - Remote Remote ID: J12705 https://goo.gl/8dFouq Truss Designer & Panel Designer Midwest ID: J12704 https://goo.gl/syTje3 Truss Designer - Single Family Florida ID: J10658 https://goo.gl/Xe303x Remote Truss Designer - Truss/I-Joist/EWP MD ID: J10683 https://goo.gl/rTVg8Z Truss Designer Northeast ID: J11700 https://goo.gl/0Dpe5r Designer - Wall Panel Iowa ID: J10591 https://goo.gl/8U9kSE Designer - Wall Panel Nebraska ID: J10592 https://goo.gl/lBCYwF Remote Designer - Wall Panel Work from Home Office ID: J10594 https://goo.gl/HKC81c Truss Designer - MiTek Midwest ID: J12701 https://goo.gl/LnogdT Multifamily Wall Panel Designer Arizona ID: J10616 https://goo.gl/x9OD7l Finishing/Shipping Supervisor - Beams Midwest ID: J11698 https://goo.gl/AurM7U
Read/Subscribe online at www.componentadvertiser.com
Truss & Wall Panel Outside Sales I-35 corridor, OK and KS. ID: J11692 https://goo.gl/xU7QVU
.
Single and Multifamily Truss Designer Minnesota ID: J11697 https://goo.gl/GmVttJ Wall Panel Designer Northeast ID: J11696 https://goo.gl/M6xmdP Production Manager - Truss Midwest ID: J11695 https://goo.gl/SSWLXt Available Candidates General Manager/Division Manager Truss/Panel/EWP/Lumber An energetic, out-of-the-box, problemsolving, executive with a science-based holistic approach to manufacturing, building products and other business operations; I am recognized for my vision, business acumen, integrity, work ethic and capability to cultivate durable professional relationships. Practitioner of “Lean and JIT” manufacturing principles, setting metrics, improving key performance indicators, reducing costs, expanding production capacity and sales – all improving the bottom line. Skilled in business analysis, strategic planning, market and sales development; ability to drive multi-million dollar growth, institute “Best Practices” for small to medium emerging and expanding companies, managing budgets to $ 30M with full P&L accountability and oversight. 20+ Years of truss/panel/EWP manufacturing and business management experience. In 2006 at the height of residential construction distributed $ 24.0 in Lumber, Architectural Millwork and Windows and $ 8.5 M in manufactured wood components. In this position optimized design and production process, which increased output and reduced labor and material costs. Hired trained and mentored middle management; negotiated union labor contracts. Implemented “Lean and JIT” fabrication procedures; consolidated raw material inventory, implemented batch fabrication process and continuous production flow. Enhanced scheduling system to accurately track production and achieve on-time delivery, established QC metrics, quality assurance and OSHA-approved safety programs. After 2006, helped company downsize and then worked as a consultant for turn around opportunities. Computer literate, Alpine and MiTek experience, Microsoft Office. Relocation: CO, CT, DE, IL, MD, MA, MN, NJ, NY, PA, WI, NC, OH, IN, KY, LA, ME, MI, MO, OR, SC, VA, DC, NH, VT ID: C11638 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com FAX: 800-524-4982
JobLine.com, inc.
800-289-JOBS
The
EWP Designer | Estimator | Inside Sales Experienced with AutoCAD, iLevel, TJ Beam, and TJ xPert software to produce framing layouts for TrusJoist engineered wood products. Responsible for working with builders and retailers to create the most cost effective solution for their project. Creating quotes from layouts. Calculate gravity loads and sizing wood products to support the load. Understanding the IRC building code for wood-framed structures. Explaining structural framing details to builders and salespeople. Training other designers in load development and design software. Relocation: VA ID: C14506 Remote Truss Designer As Design Manager: Managed a design staff of eight people ensuring that workload was distributed and projects were completed in a timely manner. Worked with production manager and dispatcher to insure that work was prioritized accordingly. Trained new employees and coached existing technician in the use of MiTek design software and encourage them to use problem solving skills to come up with value engineered design solutions. Tracked incident information relating to design and fabrication issues so that management could focus on areas where process improvements or additional training are needed. As Designer: Designed roof and floor trusses on both tract homes and high end custom work. Interacted with both salespeople and customers on a daily basis to provide accurate layouts and truss designs. Relocation: OR ID: C14497 Designer/Production/Estimating/Inside Sales - Truss/Loose Lumber 6 years truss industry experience. 3 in design using MiTek and 3 in production, starting as a builder, stacker, sawyer, forklift operator, then into supervision and production manager. Started learning design, estimating and inside sales 3 years ago. All at the same company. Is working toward an engineering degree. Software includes MiTek 20/20 & eFrame, Optiframe, and CadWorks. Products include Floor and Roof Trusses, and loose lumber. Thom's Notes: We tested this candidate and his results confirm a solid 3.5 years skill level but he only had a Construction Master, no software. Not easy with only 3 years experience. I think this candidate is a hidden find! Relocation: AZ, CA, CO, NV, OR, WA, AB ID: C10879 PHONE: 800-289-5627
www.thejobline.com
Available Candidates Truss Designer | Wall Panel Designer Wall Panel Designer | Remote Wall North Carolina Panel Designer 5 years truss design experience - focused Experienced candidate in the design and on floor and roof trusses and connectors. production of a variety of commercial wall I designed trusses and engineered wood panel jobs; small single and multi-unit retail beams for many residential, commercial, structures, medical care facilities, assisted multifamily, hotels, and developments. Once living structures and multi-unit multi-level the design was completed I would provide a apartment and hotel buildings. Coordinate detailed estimate/quote to the customer, and panel designs with truss and EWP designers assist in the final price negotiations. Once as well as loose material estimators for accepted a detailed cutting and stacking list supplying complete framing packages. was provided for the builders in the shop. Prior whole house design using AutoCAD. I provided technical support as needed to Current in MiTek's Sapphire. Some truss builders. Jobsite visits were required from design experience but focus is wall panels. time to time for updates problem solving etc. I spent some time training a couple of new people over those years. MiTek, AutoCAD, Relocation: MD I-Joist software experience, not on Sapphire. ID: C14505
Remote Truss Designer Design Roof and Floor trusses from blueprints. Engineer and send to production finished designs along with placement schematic and hanger info. Additionally, I had to engineer LVL beams for floor truss schematics. Has been out of design since the crash, but scored "Average" with only a Jobber. Considering average equals 15 years of experience, he should be able to get back up to speed quickly. Prior MiTek, some Alpine and Truswal, CAD, I-Joist, Beam, and Microsoft Office software experience. Relocation: IN, KY, NC, OH, TN, USA South, VA, WV ID: C13446
Truss Design/Estimating Truss Estimator/Designer. - Intermediate. Candidate has 10 years industry experience and 10 years experience in this position. Products include floor trusses and roof trusses. Markets include single family, single family custom, multi-family, light commercial, and agriculture. Primary duties include design, layout, optimization, and takeoff. Secondary duties include checking others work, repairs, customer service, inside sales, field measurements, software maintenance, training, and filling in for the Design Manager as needed. Software experience includes MiTek and I am willing to learn new software. Education: High School Graduate and Associates degree in Arch Tech. Compensation desired $50,000: Salary. Motivating factors: advancement, compensation, benefits, and job security. Relocation: AB, USA - ALL States, AZ, BC, Canada - Eastern, CO ID: C10132
Prior experience: Design wall panels (some roof and floor trusses) for residential developers, multifamily, hotels, and assisted living buildings. I had regular contact with the builders, engineers, and architects. Once the design was completed I would provide a detailed estimate/quote to the customer, and assist in the final price negotiations. Once accepted a detailed cutting, stacking diagrams and other paperwork was sent to the manufacturing shop. Thom's Notes: Although the candidate has been out of the truss design job since 2007, he has remained in an architectural design, teaching and designing, and his test results show. Scored above average, faster than average, and only used a calculator and CAD. He is one of the best retread candidates I have seen this year. Txt: C14465 to 406-210-1226 or call 800-289-5627 x1 Truss Designer | Truss Design Manager | Estimator | Estimating Manager Relocation: IL, IN, MI, OH Manage the design/engineering & estimating departments. Supervising 3-8 designers in roof and floor truss design/ engineering and I joist design. Coordinate truss repair drawings and timber truss designs. Personally manage large builder accounts. MiTek Sapphire, prior Alpine, Keymark, TeeLok. This candidate will work remotely and has some relocation areas acceptable. Txt: C14456 to 406-210-1226 or call 800-289-5627 x1
Tell Them You Saw it in the
M ACdverti$er omponent
anufacturing
Serving the Structural Building Components, Engineered Wood Products and Millwork Industry
Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com Read/Subscribe online at www.componentadvertiser.com
September 1st, 2015 #08194 Page #36 Design/Operations Manager Truss/Panel - Wood/Steel As Operations Manager: Responsible for all aspects of a major component manufacturing facility, including: profit/loss accountability, budgeting, inventory control and compliance with company policies in all facets of the facility's operations. Recorded a 4% profit, based upon sales, within three months of assuming the leadership position. Responsible for a staff in excess of fifty persons including: engineering, sales, office, delivery and production personnel. As Design Manager: Directly supervised and managed the engineering department staff of eight. Department was responsible for creating engineering and layout drawings for all orders. Scheduled and reviewed all work to ensure it was completed within company guidelines. Led the conversion to MiTek 20/20 design software and MiTek MBA for order entry and quoting. Responsible for the setup and implementation of updated Quality Control program and established design and training standards for engineering staff and lead production personnel. Worked closely with manufacturing to facilitate the assembly and erection processes through the layout and design of components. Relocation: MI, USA - Eastern, USA South, MD, VA ID: C11927 Senior Truss Designer + Panel/EWP/I-Joist/Framing Package Candidate has 15 years industry experience, 4-5 years experience in this position, and 10 years in subordinate positions leading to this position. Products include floor trusses, roof trusses, wall panels, I-Joists, EWP, hardware, and complete framing packages. Markets include tract, single family, single family custom, multi-family, and light commercial. Primary duties include design, layout, optimization, cutting/production documents, and takeoff. Secondary duties include checking others work, customer service, inside sales, software maintenance, network administration, training, and filling in for the Design Manager as needed. Software experience includes MiTek, Truswal, Comsoft/IBS, TJ Expert, AutoCAD, and I am willing to learn new software. Relocation: CA, TN, WA Txt: C10199 to 406-210-1226 or call 800-289-5627 x1 Plant/Location/General Manager-Truss Relocation: AZ Over 20 years experience including P&L responsibility for a truss manufacturing facility producing $18M, multiple shifts, 150+ employees. Very stable with a career track from Production. Computer literate, Microsoft Office. Txt: C11270 to 406-210-1226 or call 800-289-5627 x1 FAX: 800-524-4982
JobLine.com, inc.
The
JobLine.com, inc.
The
800-289-JOBS
Time To Hire? We’re here when you need help! visit: www.thejobline.com
email: mail@thejobline.com or call Thomas McAnally for Personalized Service
STRICTLY CONFIDENTIAL! Truss/Wall Panel/Management Plan direct & control daily operations of wall panel & floor panel division. I Provided a complete plant layout and directed the installation and start-up of a 2004 PanelPlus wall panel line. Evaluate productions, plan and manage budgets and direct QC inspections. Provided wall panel designer training & developed design, production & quality control guidelines. Oversee the analysis of data and information and report to upper management. Provided Site supervision & training for home builders and framing contractors. Lead the planning, pricing, scheduling, administration, implementation & installation of all products, floor panels, wall panels, roof trusses & building materials. A typical 2 story house w/basement (1600 +/- sq./ft.) would be erected in 2-5 days ready for shingles. 20 years experience including Outside Sales, coordinating Estimating, Sales, Design, Production, Delivery and Administrative functions of the truss plant with builders, engineers, architects, home owners, project managers, contractors and store managers. Established work schedules, created designs, layouts and Cad drawings as needed. Supervised up to 3 designers, including training new designers. Coordinated schedules, manufacturing, delivery, billing and job sign off. Resolved problems including collections as needed. Proficient with MiTek, OptiFrame, and Microsoft Office software. Relocation: AK, BC, ID, MT, OR, CO ID: C11220 Thomas McAnally Personal Recruiter 800-289-5627 x1 www.thejobline.com PHONE: 800-289-5627
800-289-JOBS www.thejobline.com
Hiring Zone - Available Candidates Production Manager/Designer/EstimaPlant/Location Manager tor - Truss/EWP/Beams/I-Joist Floor & Roof Truss/Wall Panel Relocation: Virginia Relocation: USA - ALL States Overview: Overview: As Designer: Problem solving with Started in production, working as a builder, incomplete or questionable plans. sawyer, and forklift operator for 16 years. Verification of roof and floor systems As a working shop supervisor he trained including beam adequacy as specified by 10-20 production workers over 2 years. As architects or engineers. Liaison between production manager, he trained, evaluated company suppliers and customers to local and suppervised 25 to 35 production area codes compliance inspectors and plans employees. Responsible for reporting of examiners. Development, manipulation, and lumber inventories and purchasing of plates modification od estimating subroutines in and hangers. Maintained production levels computer software to ensure profitability to meet customer's needs. Increased roof of work. Maintenance of all default and and floor production and lowered labor rates variable software was kept up to date from through hand-on training and leadership a codes standpoint. Hardware order and for 7 years. For the last 5 years he has been inventory control. Taking and verifying responsible for production operations of field dimensions. Verification of contract entire plant. Accountable to owner for the necessities and criteria for commercial productivity and profitabilityof the plant. applications in private, state, and federal In charge of all day-to-day operations areas. This includes contract negotiations, of production, inventory management, addenda, plans changes, and documents worker supervision and OSHA regulatory for proper design, manufacture, and compliances. Hired, trained, evaluated delivery of products. Company quality and managed a work force of 40 people, control representative to TPI (Truss- including 2 supervisors At one time had 3 Plate Institute). Including inspections, for shifts. Led company to 28.4 million BFT of verification of product to national standards. production at 94.1 BFT per man hour. Estimate, Design, optimize, layout and when necessary consult with production Compensation: $70-80K and shipping on orders for wood roof Txt: C11504 to 406-210-1226 trusses, floor systems, and accompanying or call 800-289-5627 x1 beams and hardware. Software: BC Framer, Truss Plant/Location/General Manager FASTBeam, I-Joist, MiTek, Simpson, TJ Truss and Components Plant Manager with Beam, Microsoft Office. over 15 years of experience in the truss Txt: C12286 to 406-210-1226 industry who is looking to apply knowledge or call 800-289-5627 x1 gained while continuing to develop and Production/Design/Location Manager - grow within the management sector. Truss/EWP/Package As Plant Manager: Create programs to Design and manage all truss operations. motivate employees to achieve peak purchase all lumber and plates. Arrange productivity. Hire, train, discipline and payment and shipping. Troubleshoot every terminate employees. Order lumber and all aspect including machinery. Implemented production materiel. Coordinate weekly our OSHA safety plan and requirements. production, sales and safety meetings. Print invoices and remove material from Research cost on purchasing new equipment. active inventory using peach tree software. Attended monthly city council meetings to Set up new customer accounts and validate ensure codes were followed. Oversee credit references. Design wood and steel development of truss fabrication facility. joists and headers. Assist customer project Ensure compliance with Cal OSHA and problems for the best economical and Dot. Oversee shipping and optimize freight costs. Responsible for training leads and practical solution. supervisors on company policy’s. Program Prior: Truss design and supervise. Purchase and operate computerized equipment. building material. Arrange billing and shipping from start to finish. From the Proficient with Microsoft Programs, Excel, small detached garage to the large apartment Word, Outlook, ERP software Team growth and development through complex, I have done them all... Relocation: CA effective feedback and ongoing mentorship Excellent communication skills ID: C12276 Experience working with: Metal, Polymer ATTENTION EMPLOYERS Blends, Components, Finished Product We have over 1,000 Assembly, Clean Room, etc. registered Industry Professionals. Tenacious, Professional, Detail-Oriented, All Job Searches are not public! Strong Sense of Urgency We can search behind the scenes Lean Manufacturing Certified, Kaizen to find the right candidate for your opportunity. Trained, Fork lift Certified Relocation: Arizona, Arkansas, California, See what I can do for you! Colorado, Florida, Hawaii, New Mexico, Thomas McAnally Texas, USA - ALL States 800-289-5627 x1 Txt: C10500 to 406-210-1226 twm@thejobline.com or call 800-289-5627 x1 Read/Subscribe online at www.componentadvertiser.com
September 1st, 2015 #08194 Page #37 Designer/Remote Designer - Truss Relocation: Georgia Design and engineer roof and floor truss systems for residential, commercial and multifamily applications using Alpine AutoCAD design software. Communicate with builders, architects, and engineers to obtain initial truss design and follow up to ensure proper delivery and instillation and repairs if needed. Responsible for design, engineering, repairs, installation guides, job quotes and pricing takeoffs for some of the company's largest customers. Inspection of truss installation, placement and loading conditions at specific job sites in order to ensure customer satisfaction. Txt: C12154 to 406-210-1226 or call 800-289-5627 x1 Outside Sales/Technical - Truss Relocation: Arizona, California, Colorado, Idaho, Minnesota, Montana, Nevada, New Mexico, Oregon, South Dakota, USA Western, Utah, Wyoming, Iowa, Oklahoma, Texas. 35 years construction experience, 25 in truss sales. Sells Trusses wholesale. Sells Trusses to Builders and Owner Builders and service the account through Design, Pricing, Production, Delivery, Installation, and problem solving. Also service National accounts which involves solving all the in-field problems. Dealing directly with the project Supervisor on missing trusses, damaged, missing plates, trusses don't plane, don't work, design errors, bad deliveries, dealing also with the building inspectors, and project engineers. Compensation: Mid $30's base plus commission. Txt: C10234 to 406-210-1226 or call 800-289-5627 x1 Design Manager/Senior Designer - LGS Relocation: New Jersey, New York Overview: As GM: Restructured, organized and currently managing the truss department for the company. Estimating and overseeing all truss estimates valued between $20,000 - $2,000,000. Designing and supervising truss designs for all running projects. Managing projects including supply only and installations. Inventory control including ordering and maintaining approx. $200,000 stock material. Coordinating with Engineers and Architects on design/builds, loading and calculations. Sales coordination through proposal follow-up's, customer design meetings and jobsite tours. As Estimator/Senor Designer: Estimating and design of truss projects. Project management. Coordination of third party engineering, subcontractor installations and material ordering. Always learning and looking for more efficient and economical business practices. Helped restructure the department to become accountable and more profitable. Txt: C12165 to 406-210-1226 or call 800-289-5627 x1
FAX: 800-524-4982
M ACdverti$er omponent
anufacturing
September 1st, 2015 #08194 Page #38
Adverti$er
Don’t Forget! You Saw it in the
Business & Professional Services Listings
Truss Design | Wall Panel Design | Whole House Materials exclusively for MiTek 20/20 customers
www.componentrunner.com 314.374.7400
CDean@ComponentRunner.com Used Equipment Wanted! Floor Truss Machines Floor Truss Web Saw
Before You Buy Equipment! Save tens of thousands of dollars by first getting a complete assessment of all your current and future needs with a lean manufacturing consultation. Unbiased, pro versus con assessment
of all manufacturing equipment
No referral fees or commissions from
the plate or equipment vendors
Onsite consulting services for the
765-751-9990
ALS or Miser Linear Saws Cyber AT, Servo Omni or AutoMill Trackless Roller Gantry Systems Lumber (Chord) Splicers Triad “Diamond Quad” Framing Tables Viking Fastrac Portable Sheathing Bridge Triad Metal Framing Equipment 48’-70’ Stretch Roll-Off Trailers Gooseneck Roll-Off Trailers Apollo Saws with Truss Automation Pacific Automation Auto-10 Truss Press Planx or Wizard Jigging Systems SL Laser or Virtek Laser Projection Systems Field Repair Press Stationary Bunk Cutter Mark-8 Truss Press Pacific Automation Ultra-Press 16
wood truss and wall panel industry
NORMAL NET PROFIT GAINS ARE 3 TO 6 POINTS!
Toll Free: 800-382-0329 www.wasserman-associates.com
75+ Clients - See Web Site for Testimonials 10+ Years Consultant Services All Areas Covered - 50% Shop / 50% Office
25+ Years in Truss Industry
Todd Drummond Consulting, LLC www.toddwww.todd-drummond.com todd@toddtodd@todd-drummond.com Phone 603603-763763-8857
We welcome Angela’s Creative Design Studio to the Advertiser Family. If you ever wondered who does the fantastic artwork for Panels Plus, search no more. Let Angela create stunning media for your company. Visit her website at www.angelascreativestudio.com PHONE: 800-289-5627
Read/Subscribe online at www.componentadvertiser.com
FAX: 800-524-4982
www.mii.com/MiTekAssurance
Page 39
Component Manufacturing Advertiser
www.MiTek-us.com September 1st, 2015