decA em UG be UrS .T. 107
Bridging theGulf Beach Resort Towns Connected With Help from CSDA Member
Cutting at Food Processing Plant in UK Aircraft Tow Path Cut and Recycled Wall Sawing at Navy-Marine Corps. Memorial Stadium
11 0 e 2as t re Veg 3 c n Las C465 o C 1, #
1 th of 1, 20 t Boo
w w w. c s d a . o r g
ld17–2 SDA a r C o W Jan Visit
President’s Page
Douglas H. Walker CSDA President
B
oy, the U.S. has survived another set of elections and will, most
one of the best ways to get the greatest benefit out of the Association,
definitely, experience another round of political changes. The
and there are many ways for you to go home with new ideas to make
question is, are we ready for more changes?
your company better and more profitable. I encourage you to take a look
One of the best ways for your company to be prepared for any kind of
through the brochure inserted into this issue of Concrete Openings and
a change is to employ people who are well trained. CSDA will be holding a
find those presentations, workshops and roundtables that will best help
Wall Sawing and Drilling 101 class at World of Concrete in January 2011 out
you adapt to the changes ahead.
in Las Vegas. To be able to attend a major training class while at World of
This is my last President’s Page, and I can’t tell you how much I have
Concrete really serves two purposes. First operators can gain the knowledge
appreciated all the support everyone has given during these trying
they need to become more proficient at their jobs while also being able to
economic times. I hope, as your President, I have met your expectations.
see and use some of the latest equipment available to them. Having the
First, I would like to thank Ed Hallowell. Many of you may not know Ed,
latest and greatest equipment out there is a second way to be prepared
but I started in this business working for him and he was a Charter member
for changes in the market place. Well trained employees and new, efficient
of CSDA. I would also like to thank Weldon Birch for encouraging me to
equipment will make us all better companies.
get involved with CSDA. Without that nudge, I may have been sitting on
CSDA will also hold several important meetings at World of Concrete.
the sidelines right now. Thanks to all of the committee chairs and their
The Board meeting is open to anyone who wishes to see just what CSDA
members for all the hard work, dedication and support they have given
is doing for its members and the industry, and will be held January 19
me over the last two years. Others I would like to thank are Tom Stowell,
in room N203 of the Las Vegas Convention Center. Also scheduled is a
Steve Garrison, Ron Culgin, Mike Nelson, Skip Aston, Ted Johnston, Susan
meeting of CSDA’s own Next Generation group. This group of younger
Hollingsworth and Jim Dvoratchek. Any time I had a question or needed
members is already starting to have a major impact on the association
some kind of advice, these CSDA members were always there to help me.
and I look forward to watching them chart their own course in a changing environment.
My biggest thanks go to the CSDA staff: Pat, Cherryl, Erin, Aimee and Russell. Without this group at O’Brien International, none of the successes
In March, the 39th Annual CSDA Convention and Tech Fair will take
the Association has had in the past two years would have been realized.
place in Bonita Springs, Florida. The convention is an excellent place for
Good luck to all in the industry for the coming years, and please remember
participants to learn about the changes taking place in the industry and
to support the Concrete Sawing and Drilling Association and participate in
gain knowledge from skilled presenters. The convention has always been
the organization. Doing so may be the best change you could ever make.
w w w. CSD A .ORG
c on c re t e o p e n i n g s | 1
DELIVERING INNOVATION CWS-200 CHAIN WALL SAW
LEADING THE INDUSTRY WITH NEW IDEAS TO SOLVE YOUR PROBLEMS. • Long, narrow horizontal openings • Near ceiling, floor or wall • Confined spaces • Cuts through sill or overhang For more information visit icsbestway.com or call 800.321.1240 © 2010 ICS | Blount Inc. All rights reserved.
the official magazine of the concrete sawing & drilling association
CSDA OFFICERS
concrete cases
President, Doug Walker Atlantic Concrete Cutting, Inc. dwalker@atlanticconcretecutting.com
Bridging The Gulf
Vice President, Jim Dvoratchek Hard Rock Concrete Cutters, Inc. jimd@hardrockconcretecutters.com
Beach Resort Towns Connected with Help from CSDA Member
Secretary/Treasurer, Judith O’Day Terra Diamond Industrial joday@terradiamond.com Past President, Tom Stowell Norton Pro Diamond thomas.stowell@att.net Executive Director, Patrick O’Brien Concrete Sawing & Drilling Association pat@csda.org CSDA BOARD OF DIRECTORS (Terms expiring 2011)
6
Roger Allen Diamond Tools Technology roger@diamondtoolstechnology.com Larry Liddle Diamond Products Limited lliddle@diamondproducts.com Mike Orzechowski DITEQ Corporation mikeo@diteq.com John van Dyk Canadian Cutting & Coring Ltd. info@concretecutting.ca Kellie Vazquez Holes Incorporated kvazquez@holesinc.com
Navy-Marine Corps. Memorial Stadium Sky Box Expansion
16
Kevin Warnecke ICS, Blount Inc. kwarnecke@icsbestway.com CSDA BOARD OF DIRECTORS (Terms expiring in 2012) Kevin Baron Western Saw, Inc. kevinb@westernsaw.com Tim Beckman Cutting Edge Services Corporation beckman@cuttingedgeservices.com
22
Steve Garrison Hilti, Inc. steve.garrison@hilti.com Donna Harris Concrete Renovation, Inc. donna.cri@sbcglobal.net Ron Rapper Husqvarna Construction Products ron.rapper@husqvarna.com Jack Sondergard Central Concrete Cutting, Inc. jacksondergard@sprynet.com
w w w. CSD A .ORG
Special Mission for the Blue and Golds
Cutting and Recycling: Plane & Simple
Concrete Cutter Helps Boeing’s Plans Take Flight
Sweet Cutting
Contractor Takes a Bite out of the Chocolate Factory
36 c on cre t e o p e n i n g s | 3
Concrete Openings Magazine Official Magazine of the Concrete Sawing & Drilling Association Volume 19, Number 4 ISSN: 1093-6483 Concrete Openings magazine is published by O’Brien International, Inc., four times each calendar year in March, June, September and December. Editorial contributions are welcomed and advertisements are encouraged. Please contact the Concrete Sawing & Drilling Association 13577 Feather Sound Drive, Suite 560 Clearwater, FL 33762 Tel: 727-577-5004 Fax: 727-577-5012
c o n t e n t s 1
12 Students Guard Against Premature Blade Failure 28 The Business of Business
Improvement as a Two-Minute Drill: Lessons for Leaders
32 Tech Talk
Anchor Selection and Installation
www.csda.org Magazines, newspapers and private individuals are welcome to reproduce, in whole or part, articles published herein provided that acknowledgements are made in the following manner: “Reprinted courtesy of the Concrete Sawing & Drilling Association, Concrete Openings magazine, Issue Date.” No alterations should be made in the text of any article. Publisher Patrick O’Brien Editor Cherryl O’Brien Assistant Editor Russell Hitchen CONCRETE CASE Contributors John Robinson Rob White Tracy Campbell Tauna Prince Neil Wood Editorial Review Committee
President’s Page
42 Core Health
The Importance of a First Aid Kit
45 OSHA / CSDA Alliance Latest 46 Safety Counts
Ladder/Scaffolding Safety and Fall Protection
48 Insurance Corner
Work Truck Accident Litigation: The Duty to Preserve Evidence
52 Industry Bits 62 Certified Operator Companies 64 Calendar 65 New Members 68 Director’s Dialogue
Skip Aston Rod Newton Pat Stepanski The information and recommendations in this magazine are provided for use by fully qualified, professional personnel. The Concrete Sawing & Drilling Association and the publisher disclaim any responsibility as to their use by readers and shall not be liable for damages arising out of the use of the foregoing information. All bylined articles published in this magazine represent solely the individual opinions of the writers and not necessarily those of the Concrete Sawing & Drilling Association.
Cover Photo: John’s Pass, Madeira Beach, Florida Photo courtesy of Flatiron Construction Corp.
4 | d e c e mbe r .10
28
The Concrete Sawing & Drilling Association at World of Concrete January 17–21, 2011 Las Vegas Convention Center Las Vegas, Nevada
CSDA has a core group of events planned for World of Concrete 2011 Free Registration CSDA offers free registration and seminar discounts. Simply visit www.csda.org and click on the WOC banner.
Wall Sawing and Drilling 101 Class (Jan 17–20) Great registration discounts are available. Visit www.worldofconcrete.com/attendee/ education/certifications-exams.aspx to read more about this 4-day training class.
Next Generation Meeting (Jan 19) The Next Generation group serves the needs and wants of younger members. All young industry professionals are encouraged to come to the meeting to see how they can help shape CSDA as it moves into the future.
CSDA Board of Directors Meeting (Jan 19) This meeting is open to all members and non-members and WOC attendees are encouraged to sit in the meeting to see what CSDA is doing for the sawing and drilling industry.
CSDA Booth (#C4653) Federal and local representatives from OSHA will be at the CSDA booth during the event to provide advice and guidance, while Board and committee members, staff and contractors from CSDA will be present to share information about the industry, the association and discuss the benefits of membership.
Learn a whole lot at World of Concrete!
“Like” CSDA on Facebook for exclusive WOC news and promotions. Watch CSDA videos on the CSDAssociation YouTube channel.
Photo courtesy of Flatiron Construction Corp.
Beach Resort Towns Connected with Help from CSDA Member
A
project was launched in 2006 to replace an existing drawbridge that linked two beach towns on the Gulf Coast of Florida. Over the course of the project,
a large number of holes needed to be created in the concrete machinery deck of the new bridge to position equipment and cogs for the bridge opening and closing mechanisms. The cutting work would take place over an inlet that leads from a local fishing village and tourist spot out into the Gulf of Mexico, so operator and public safety was a priority along with the containment of waste material and slurry. 6 | d e c embe r .10
C O N C R E T E
C A S E S
John’s Pass is one of the most popular tourist attractions in Pinellas
of Palm Harbor, Florida, to perform the core drilling aspects of the
County, Florida. The village and boardwalk is home to shops and
work. The use of diamond core drilling provided low levels of noise
restaurants, while fishing excursions, local cruises and water sports
and vibration to protect both the structure and members of the public
vehicles depart and return each day. Spanning the waterway that flows
visiting the boardwalk nearby.
out to the beaches and into the Gulf waters was an 875-foot twin-
The general contractor had a plan for the installation of the
span drawbridge built in 1971. The currents flowing through John’s
machinery but Accu-Cut proposed another method. John Robinson,
Pass had undermined the bridge pilings, so the Florida Department of
owner of Accu-Cut, explains, “The original engineering called for the
Transportation (FDOT) made the decision to replace the bridge. The
machinery to be placed and properly aligned, all the holes to be marked,
new bascule bridge would be constructed to stand 8 feet taller to allow
and then the machinery to be moved off the pinion bases while the
more boat traffic to pass without the bridge having to be raised. This
drilling took place. We put forward a plan for precise alignment and
adjustment would also benefit around 17,000 drivers and pedestrians
drilling of all holes with the machinery in place.” This idea represented
that cross over the bridge each day. The project would cost approximately
savings in time and expense for the general contractor, so Robinson
$77 million to complete over a four-year period.
did not have to provide too much encouragement. “Flatiron liked the
A total of 96 holes was specified to mount the new machinery for the new drawbridge to a 42-inch-thick concrete machinery deck, with a
proposal and submitted a plan to the FDOT. Approval was granted for this approach,” he added.
further 128 additional holes for primary and secondary gear reducers.
Accu-Cut’s plan involved the fabrication of a special alignment
Some of the locations chosen to create the core holes were in tight spots
attachment to drill each of the 2.5-inch-diameter holes. The job involved
with limited clearances, but the precise and proper alignment of gears
creating 96 of these holes, which were split into groups of 12, for the
and machinery was crucial, so a concrete cutting contractor specialist
eight separate pinion bases where the bridge machinery is located. The
was a necessity to complete the work accurately.
holes were to be drilled 42 inches deep through each concrete base and
Flatiron Construction Corp., headquartered in Longmont, Colorado,
lined up precisely with a 2-inch-thick, 1,700-pound steel plate positioned
was chosen as the general contractor for the new bridge work, and
under it. The plate had an identical configuration of 12 holes, with only
the company contacted CSDA member Accu-Cut Concrete Services, Inc.
0.25 inches of clearance per hole.
A special alignment fixture was made to perform accurate drilling.
w w w. CSD A .ORG
c on cre t e o p e n i n g s | 7
The contractor core drilled 96 holes, 42 inches deep, in four pinion bases.
Each hole had to be perfectly aligned to a corresponding hole in a 2-inch-thick steel plate underneath.
8 | d e c embe r .10
A wall saw was used to cut through concrete and rebar that made up 8-inch-thick tub walls.
C O N C R E T E
C A S E S
The contractor core drilled 74 concrete piles as part of the bridge’s fender system.
In May 2008, the cutting contractor began designing the special
of the bridge was completed the following month, after which the
alignment tool to be used to create precise holes for all four bascule
specially fabricated fixtures were stored until the northbound section
sections of the bridge. At this stage, the contractor had to work from
was ready for cutting. In March 2010, the operators returned to complete
drawings as the first of the pinion bases was still being fabricated. The
the northbound drilling work in a similar length of time. However, the
design for the fixture was realized with help from Wel-Co Diamond Tool
team had several other tasks to perform at the bridge before this.
Corporation. The company provided a machine shop, assisted with the
The previous year, in June 2009, the contractor completed wall
creation of the alignment fixture and modified a Milwaukee two-speed,
sawing work on two tub wall sections, consisting of 8-inch-thick by
low profile, right angle drill for the job, as per Accu-Cut’s specifications.
7-foot-high walls, grouted 2 inches apart back-to-back for a total
CSDA member Diamond Products also lent a hand, providing a special
thickness of 18 inches. These tubs formed the bases of the main bascule
threaded core bit tube in short 6-inch lengths to achieve the required
piers, and were cast on a floating platform near the bridge and moved
42-inch depth. This was to be extremely helpful for the cutting team,
into place. Once the second tub wall was in place, the walls between
as 64 of the 96 pinion base holes were to be drilled in a 6-inch-wide
them were grouted to seal out water and cut out 6 inches below sea
by 26-inch-tall space.
level. In addition, 72 dowel holes measuring 2 inches in diameter and
The cutting team from Accu-Cut, consisting of two operators equipped with one core drill, began drilling on the southbound span
24 inches deep were cored horizontally into each of the bases on the southbound side of the bridge.
of the bridge in June 2008. An average of six 42-inch-deep holes were
At the start of 2010, four 30-inch-diameter temporary tressel piles,
created by the team each day, and the concrete contained #10 rebar
a 0.5-inch-diameter steel pipe filled with concrete and a #11 rebar
that operators had to cut through. Drilling of the southbound section
cage were interfering with the construction of the northbound bridge
w w w. CSD A .ORG
c on c re t e o p e n i n g s | 9
One of the completed pinion bases with machinery securely installed.
section and needed to be removed. Accu-
In total, Accu-Cut Concrete Services, Inc.
contract was simply to drill the holes for the
Cut worked with another CSDA contractor,
cored 696 holes during the project, ranging
new machinery, but our performance gave
American Inshore Divers Corp. of Liverpool,
from 1.125 to 2.5 inches in diameter and 13 to
Flatiron the confidence to send more work
Texas, to cut the obstructions at the mud line,
42 inches deep using a hydraulic core drill from
our way,” said Robinson. “The high standard
which in some cases were 45 feet underwater.
Diamond Products. In addition, the contractor
of work by my trained operators has carried
The contractors used the combination of a
used a Hydrostress wall saw from CSDA member
the company through some tough economic
diamond wire saw and cutting torches to
Tyrolit to cut the 8-inch-thick sections of tub
times,” he added.
remove these items and allow the bridge
wall and a 120-foot electroplated diamond wire
construction to continue.
from Diamond Products was used in the water
Then, in May 2010, the contractor cut 74
to cut the miscellaneous items obstructing the
Company Profile
piles, each measuring 30 inches wide by 30
construction team. The team also employed
A CSDA member since 2002, Accu-
inches long to an elevation 6 feet above sea
hand saws from another CSDA member,
Cut Concrete Services, Inc. has been
level and core drilled 400 holes 2 inches in
Reimann & Georger Corporation, to perform
in business for 20 years and is based
diameter and 30 inches deep through the piles.
some of the cutting work.
in Palm Harbor, Florida. The company employs five operators and has three
100 of these holes were drilled underwater
“John and his team did some great work
using hydraulic drills. This part of the work was
at the bascule bridge,” said Chris Downey
trucks. Accu-Cut offers concrete cutting
for a fender system that protects the bridge
of Flatiron. “Accu-Cut had to work to tight
services of slab sawing, wall sawing,
piers in the water. It took two operators two
tolerances, coring through 3.5 feet of concrete
hand sawing, wire sawing, core drilling
months to complete the piles on both sides
to line up with the base plate. John fabricated
and grinding.
of the bridge.
custom equipment to improve time and
Working in such close proximity to water and around other construction contractors
efficiency. His team was self-sufficient and well trained,” he added.
Resources
General Contractor: Flatiron Construction Corp.
were two factors that made the extensive
In September 2010, over four years after
cutting work at the John’s Pass Bridge more
work began, both spans of the John’s Pass
of a challenge. All personnel were required
Bridge were opened to the public. Four lanes
to wear life vests at all times on the job
allow traffic to traverse the bridge, while
site, along with standard items of personal
pedestrians can use new walkways to cross
Phone: 727-787-4843
protective equipment. The team from Accu-
on foot. The cutting portions of the work were
Email: john@accucutconcrete.com
Cut was trained in the hazards of working in
completed on time and within budget, which
or around water.
led to extra work for Accu-Cut. “Our original
Sawing and Drilling Contractor: Accu-Cut Concrete Services, Inc. Palm Harbor, Florida
Website: www.accucutconcrete.com Methods Used: Core Drilling, Wall
REVIEW AND COMMENT ON THIS ARTICLE AT: WWW.concreteopenings.com/FORUM.CFM
1 0 | d e ce mbe r .10
Sawing, Wire Sawing
w w w. CSD A .ORG
c on c re t e o p e n i n g s | 1 1
Students Guard Against Premature Blade Failure CSDA Sponsors University of Toledo Engineering Project
O
ne of the most common machines used by concrete cutting contractors
In April of this year, seniors from the
is the flat saw. As the saw is operated, water is used to cool the blade
University of Toledo’s Mechanical, Industrial
and limit or suppress dust creation. One issue is that when water is
added, concrete particles that would otherwise create dust now form slurry. Slurry can have a detrimental effect on the saw and the environment.
and Manufacturing Engineering program gave their final report on a Concrete Sawing and Drilling Association (CSDA)-sponsored project that could prove to be of great benefit to many cutting contractors. The students were
Another issue with the flat saw is the weight of the blade guard used to protect
presented with a challenge by a member of
the operator from particles during the sawing process. At the start of 2010, a
the association to address the issues of blade
project was launched to produce a blade guard design that would reduce the overall weight of the guard shielding the blade and decrease water consumption.
1 2 | d e c emb e r .10
guard weight and water dispersion, and to design a prototype that would put their solutions to the test.
CSDA Safety Committee Chair, Skip
depending on the amount of water applied.
detailing work to service representatives. He
Aston of Ohio Concrete Sawing and Drilling,
The reduction of the amount of water used
was also responsible for all modeling and
Inc., Sylvania, Ohio, was the association’s
during wet sawing was one of the focuses of
drawings pertaining to the project.
representative for the project. The cutting
the project, and the team set out to devise a
The other two members of the project
contractor uses a standard 30 to 35-pound
way to achieve this reduction using the most
team were Brian Francis and Greg Urig.
blade guard for the vast majority of their
effective methods available.
Francis assumed the role of purchasing
cutting work. The steel used for the current
Blade guards protect operators from
agent, responsible for corresponding with
blade guards is American National Standards
concrete debris, blade fragments and act as
the University of Toledo purchasing services.
Institute (ANSI) 1025 steel. The current flow
a housing for the water application plumbing.
His responsibilities also included ordering
rate hits perpendicular to the rotating blade
When the first guards were introduced, they
materials and managing the project budget.
and is around three gallons per minute.
were made of steel because the material
Urig was the web designer for the project.
This guard was to be the standard that the
is inexpensive and strong. This design has
His responsibilities included the creation of
project team would use for their analysis,
remained the same for nearly forty years. One
the project website for the university and the
tests and comparisons. “Based on the current
issue with using steel to make the guards is
maintenance, organization and updating of
specifications of blade guards in the field, we
that the steel is heavy. With blades ranging
the site.
were interested to see what the project team
in size up to 60 inches in diameter, very large
“It was a pleasure to work with this senior
could come up with to improve guard weight
and heavy guards are used to enclose the
design project group, as they were all hard
and water distribution,” said Aston.
blade. The blade guard becomes large and
workers, had strong academic backgrounds
heavy as a result. These guards are
and good industrial experience through their
an important safety feature, but
programs,” said Dr. Fatemi. “They worked very
there are many issues with using such
well as a team, received great support from
heavy guards.
their client advisors, Jerry Tipping and Skip
Guards typically need to be installed and removed from flat saws
A prototype of the team’s blade guard design.
The group completed general tasks such
is changed or inspected, the guard
as report writing, oral presentations, research
may need to be removed. In addi-
and design. The constraints of the project were
tion, guards often cannot be on the
established as safety, weight, dust collection
saw when it is being transported in
and cooling. In order to achieve a successful
another vehicle. This means before
design, these aspects had to be satisfied.
work begins each day, the guard,
Other criteria for the project design were
which can weigh up to 75 pounds,
durability, reliability, versatility, cost, assembly
must be installed and then removed
and manufacturability. To meet the two main
again when the saw is loaded up and
project objectives—reduce the amount of
taken away from the job site. This
water usage and decrease the weight of the
repeated effort can cause injury to
blade guard—the methodology of the project
the operator. Therefore, the second-
was separated into the water system and the
ary focus of the project was to reduce
blade guard system.
the overall weight of the guard and establish
for the blade. As the blade rotates in the
a more efficient mounting method of the
concrete or asphalt, a great deal of friction
guard onto the concrete saw.
a blade can reach a critical temperature that can cause the diamond tipped segments to break off or cause the blade to warp. The water is used to greatly reduce the operating temperature of the blade, thus prolonging blade life. Another benefit of performing wet sawing is dust reduction. Water is applied to the blade and contacts the loosened dust particles, forming slurry. Concrete slurry is easier to contain than concrete dust, but the quantity of slurry can be far greater
w w w. CSD A .ORG
project objectives,” Fatemi added.
several times a day. Each time a blade
In wet sawing, water is used as a coolant
occurs, generating heat. Without any cooling,
Aston, and I believe they achieved their design
Project Team
Water System Water testing was performed at the contractor’s business location using a flat saw rig on a 6-foot-long by 20-foot-wide concrete
Jason Crowe was designated as the
slab standing 6 inches tall. Flexible nozzles
project leader, acting as the main contact
with an inline pressure gauge and flow meter
with the client, Ohio Concrete Sawing and
were used. Several variations of nozzle type,
Drilling, Inc., and the project advisor, Dr. Ali
location of water spray and direction of water
Fatemi, a professor at the university with a
spray were tested. The team monitored the
Ph.D. in material failures. Crowe’s other main
temperature of the blade and the suppression
duties were to handle all crucial deadlines
of dust to determine the best configuration.
and communicate with the team to ensure
The temperature had to be maintained at a
all deadlines were achieved. Ryan Kitzmiller
level that would not allow any warping of
was the technical liaison for the project,
the blade and would not compromise the
contacting the manufacturing shop and
reliability of the diamond cutting edge.
c on c re t e o p e n i n g s | 1 3
Conclusions The overall weight of the guard was reduced by over 50 percent from 32 pounds to 14.9 pounds. This was achieved primarily by the change in guard material from ANSI 1025 steel to 6061-T6 aluminum. This weight reduction, along with adding a permanent handle to the top of the guard, should reduce operator strain. The project team did not experience any losses in structural integrity as a result of this change in material. In fact, the possible deflection of the guard side walls was actually reduced by the addition of reinforcing ribs welded onto either side of the new design. The final design put forward by the students also met the specified reduction in water usage. From preliminary testing under normal conditions, the team found that a saw was operated with a water flow rate From left to right: Greg Urig, Skip Aston, Jason Crowe, Brian Francis, Ryan Kitzmiller and Jerry Tipping.
of approximately three gallons per minute. However, through use of nozzles to better
Blade temperature was measured by
established like mounting, paneling, user
an infrared device capable of measuring
adaptations, the material used and the guard
the thermal radiation of the blade while in
spillway.
operation. Dust collection criterion, however,
The students were asked to base their
was more subjectively measured. The results
designs on a guard for a 20-inch-diameter
of the testing were analyzed with pass-fail
blade, and so they contacted CSDA member
conclusions of the dust collection criteria. It
Diamond Products of Elyria, Ohio, to
was shown that the best condition of water
determine the existing specifications of the
spray for dust collection and cooling was when
company’s blade guard range, including
water spray hit the guard at the middle radius
material, weight density and yield strength.
of the blade and hit the blade at a 45 degree
“We were happy to play a part in the project
angle. Also, the round nozzle was the most
and have found the results very interesting,”
effective nozzle tested. The lowest adequate
said Marty Marsic of Diamond Products.
flow rate was around 1.5 gallons per minute.
The final design of the blade guard was
The final design of the water system
determined to be a hinged 6061 aluminum
was decided after testing data was analyzed
guard. The strength of this aluminum is
and prototype testing was completed. The
comparable to the strength of the steel.
water system is focused at the bottom of the
However, the stiffness is not. Thus stiffeners
guard with a horizontal fan spray, applied
were added to the side of the guards to
perpendicular to the blade at the middle
prevent deflection due to coincidental
radius of the saw blade. A nozzle specifically
forces. Finite Element Analysis was used to
designed for dust suppression was used.
show that the deflection due to a 20-pound
Blade Guard System Blade guards for any concrete saw must be designed in compliance with the ANSI standard for wall thickness of guards B7 1-2000 Wall Thickness. The designs put forward by the project team were based on this standard and some of the workable functions of the blade guard that had been specified by the contractor. Other design considerations were
1 4 | d e c emb e r .10
concentrated force at multiple locations was less than the deflection of a steel guard with no stiffeners. The general overall shape of the guard is similar to the current design with only slight modifications. The hinge allows for the front portion of the guard to be removed to position the blade as flush to the wall as possible.
direct and distribute flow, the amount of water needed in the new design was only one gallon per minute. This change in water usage did not adversely affect the dust collection or cooling of the blade, and was proved by final prototype testing. In addition, the nozzles chosen were only rated for a half-gallon per minute each, for a total spray of one gallon per minute at any given time. This meant that no additional control device was required on the guard and no additional instruction or training had to be provided to the operator. CSDA’s lead training instructor, Rick Norland, has had many years experience handling blade guards and was pleased that the subjects of blade guard weight and water distribution were chosen for the project team’s research and design. “These are two very relevant issues in the sawing and drilling industry. The results of the students’ research provide guard manufacturers with new ideas and perspectives,” he said. CSDA members may request a copy of the students’ final report by contacting the CSDA office at 727-577-5004 or by emailing info@csda.org. A Powerpoint presentation of the project is available for viewing or download via a link on www.concreteopenings.com.
BooTh #11523
SouTh haLL jan. 18-21, 2011 LaS veGaS ConvenTion CenTer Wall SaW
ultimate Red
BeaveR Bit
ultimate gReen
pRo Blade
BeaveR Bit
w w w. CSD A .ORG
205 Buxton Court • Lilburn, Georgia 30044 Toll-Free Phone: 800-654-7224 • Toll-Free Fax: 800-256-3304 c on c re t e o p e n i n g s | 1 5 dixiediamond.com
The contractor core drilled two 4-inch-diameter holes for crane connections.
Special Mission for the
Blue and Golds
Navy-Marine Corps. Memorial Stadium Sky Box Expansion
1 6 | d e cemb e r .10
C O N C R E T E
C A S E S
A hand saw was used to cut the 14-foot-wide and 4-foot-tall sections.
The stadium was opened in 1959 and is home to the Navy Midshipmen football team, the Navy men’s lacrosse team and the MLL’s Chesapeake Bayhawks lacrosse team. In May of this year, the Naval Academy needed to renovate a section of a mid-level wall in the 34,000-seat venue to incorporate elevator access to new sky
T
boxes at the east end or “gold” side of the stadium. There was
he U.S. Naval Academy maintains a tradition of producing young men and women who will go on to lead one of the country’s five branches of the
military. Not only does the academy expect excellence in the classroom, it also expects excellence in the sports
only a short period of time available to carry out this renovation, as the graduation ceremony for the 2010 Naval Academy class was taking place just two days after the work was due to start. The mid-level exterior wall of the stadium consisted of two 8-inch-thick concrete walls with a small space between them. An opening measuring 14 feet wide by 4 feet tall was required, and was to be completed, included being safety sealed. In addition,
arena. When a plan was developed to make modifications
further cutting work would be required some weeks later inside
to the Navy-Marine Corps. Memorial Stadium in Annapolis,
the stadium to allow the general contractor to connect the new
Maryland, one CSDA member had to be at the top of their game to complete a portion of this challenging project. w w w. CSD A .ORG
sky boxes to the existing structure. This work would consist of cutting 136 feet of a concrete wall that varied in thickness from 8 to 12 inches.
c on c re t e o p e n i n g s | 1 7
1 8 | d e cemb e r .10
Photo courtesy of the U.S. Naval Academy
C O N C R E T E
C A S E S
two 4-inch-diameter holes through both 8-inch-thick outer precast and inner cast walls using a CB748 core drill from Diamond Products. These holes were to be used to thread through crane connections for the safe removal of the sections, once cut. The cutting team, working approximately two stories up in a boom lift, then used a hydraulic hand saw with a 20-inch Diamond Products blade to perform the wall cuts, before switching to an ICS 880 series chain The 8-inch-thick concrete sections were lowered by crane.
saw to complete the corner cuts. Cutting
Structure Tone, Inc. of Washington, DC,
use a diamond wall saw to cut the section
and removal of both inner and outer wall
was the general contractor for the stadium
free. The general contractor was in agreement
sections, weighing 9,520 pounds and 5 tons
renovation work. The company selected Viking
with this plan and no other methods of
respectively, were completed within five hours
Enterprises as the demolition contractor for
demolition were considered. Alternative
of the first day’s work. Following the successful
the job, who then contacted CSDA member
demolition methods, such as jackhammers,
completion of this cutting work within the
G&S Concrete Cutting of Rockville, Maryland,
would have produced large amounts of
short time scale, G&S was contacted several
to perform the specialist cutting work that
debris and much more time would have been
weeks later for another job.
would create the specified opening. “We
required to attain the precise dimensions of
were very proud to be called in on such a
the specified opening.
Within three weeks, the contractor was asked to return to the stadium to cut and
fast-paced, high-profile project,” said Rob
Before work commenced, G&S needed
remove 136 linear feet of concrete from the
White, operations manager for G&S. “Viking
to subcontract a crane operator for the next
top wall. The cutting work was split into
Enterprises came to us because of our
day to hold the cut section of concrete during
eleven 12-foot-long sections that ranged from
professionalism and our ability to work within
cutting and remove it. A 100-ton Liebherr
8 to 12 inches thick. Some sections were to be
the strict time table.”
crane was supplied. The next morning, G&S
cut by wall saw and removed by crane, while
For the creation of the 14-foot-wide by
arrived on site to set up equipment to begin
other sections had to be cut free using a hand
4-foot-tall opening, G&S proposed a plan to
cutting the opening. An operator core drilled
saw and placed onto pallets for removal. This
Corner cuts were made using a diamond chain saw. w w w. CSD A .ORG
c on c r e t e o p e n i n g s | 1 9
DITEQ and Shibuya The Next Generation of Diamond Tools!
DITEQ Booth C5283
New sky boxes were installed at the top of the stadium after cutting.
was because of a 52-foot-long by 5-foot-wide overhang on a part of the wall that would not allow access by the crane. The team from G&S took 12 days to cut and remove the 12 sections of concrete. A Hydrostress wall saw from Tyrolit, with a 36-inch-diameter blade from Diamond Products, was used to make the cuts and wet vacuums were employed to collect and contain any slurry. Cutting of each section took three hours, while removal by crane took 30 minutes for each 4.2-ton piece from inside the stadium. The use of pallets to remove some of the cut wall sections worked well as an alternative method of removing those concrete sections with an overhang, but there were a couple of other factors that presented challenges for G&S. A water supply for cutting, and the positioning of hydraulics at the work area, required some extra effort. The cutting area
866-688-1032 DIAMOND TOOLS & EQUIPMENT
1250 NW Main Street • Lee’s Summit, MO 64086 2 0 | d e cemb e r .10
was located 250 feet above the nearest water
C O N C R E T E
C A S E S
Cut wall sections were lifted out by crane or placed on pallets for removal.
supply, so a water hose had to be run up to the
perform the corner cuts. Wall sawing of the
Company Profile
top of the stadium to allow wet cutting. The
12-foot-wide sections at the top of the stadium
G&S Concrete Cutting joined CSDA in
foundation and sections of the steel structure
was completed using a Hydrostress V465D1
2009 and has been in business since
had already been set in place to construct
saw from Tyrolit with a 36-inch-diameter blade
2006. The company is based in Rockville,
the new sky box, so the positioning of the
from Diamond Products.
Maryland, employs 14 operators and has four trucks. G&S offers services
contractor’s truck and hydraulic equipment
The total amount of concrete cut at the
was limited. The general contractor was able
Navy-Marine Corps. Memorial Stadium was 570
that include core drilling, slab sawing,
to remove a section of fencing around the
linear feet of 8- to 12-inch-thick wall sections.
wall sawing, hand sawing and ground
stadium to move the truck and equipment
Both stages of the project performed by G&S
penetrating radar.
closer to the work area.
were completed on time and within budget. Resources
A 60-foot boom lift was utilized to
The project was a design build that took
position operators at the work face, therefore
only five months from design to completion.
safety harnesses were required to be worn
The new sky box area at the stadium was
and secured to the lift at all times during
opened in September and now fans of Navy’s
Sawing and Drilling Contractor:
cutting. All other items of personal protective
sports teams can cheer on the blue and golds
G&S Concrete Cutting
equipment were worn by the contractor’s team
from this vantage point.
Rockville, Maryland
to insure safe operations. A 20-amp CB748
”We are happy to have completed this
Diamond Products core drill was used to create
work for the Naval Academy, and are pleased
the holes for the crane connections. Diamond
with the results,” said Preetie Ghotra, CEO
Products also supplied the 20-inch-diameter
of G&S.
blade for the hand sawing portions of the work, with an ICS 880 series chain saw used to
w w w. CSD A .ORG
REVIEW AND COMMENT ON THIS ARTICLE AT: WWW.concreteopenings.com/FORUM.CFM
General Contractor: Structure Tone, Inc.
Phone: 202-465-4830 Email: rwhite@gands.us Website: www.gands.us Methods Used: Wall Sawing, Hand Sawing, Chain Sawing, Core Drilling
c on c re t e o p e n i n g s | 2 1
Cutting and Recycling:
Plane & Simple
Concrete Cutter Helps Boeing’s Plans Take Flight
Cuts of 10 to 12 inches deep are being made to form the new tow path.
2 2 | d e cemb e r .10
C O N C R E T E
C A S E S
Boeing’s KC-767 aircraft.
B
oeing is known for being the largest aerospace company in the world and leading manufacturer of commercial jetliners. The company also builds defense, space and security vehicles. Earlier this year, Boeing needed to provide a dedicated
assembly line for one of its larger military aircraft in a plant in the northwest U.S. Part of this job involves cutting concrete for the installation of a new hangar door and tow path.
The KC-767 Military Aerial Refueling
In addition, a new reinforced Portland
down its own site for concrete washout and
Strategic Transport Aircraft has been sharing
Cement concrete pathway is to be installed.
slurry disposal. Representatives from Boeing
an assembly line with Boeing’s 787 Dreamliner,
This pathway is to be wide enough for the
had been searching for a contractor who could
the company’s new long-range airliner, in
KC-767 aircraft to be towed from the backside
offer the service of slurry and waste removal
Everett, Washington. Boeing decided that
of the main Boeing manufacturing plant to the
for the tow path project, and Salinas was able
a dedicated assembly line was required for
Boeing flight line, where the planes will be
to provide just that.
the KC-767, so plans have been drawn up
set for stall placement. The last phase of the
“We had previously done some pavement
to remove a large exterior section of the
work is to provide a reinforced exterior area,
repairs for the Boeing flight line, so they were
manufacturing plant and retrofit a new
also known as the rack, to allow the assembly
aware that we were close to completing work
hangar door at the back of the facility. The
of the new building door steel frame to take
on our own slurry recycling facility,” said
opening for the hangar door will measure
place. The rack will also accommodate the
Tracy Campbell, president of Salinas Sawing
240 inches in width, 75 feet tall and be steel
weight of the cranes for the assembly and
& Sealing, Inc. Boeing conducted a site visit at
framed. The door itself will consist of steel
installation of the frame and door panels.
the facility to determine if it was sufficient for
frames skinned with steel and stand 115 inches
A local CSDA member, Salinas Sawing &
its disposal needs. Campbell continued, “They
tall at the opening. A total of eight panels that
Sealing, Inc. of Mukilteo, Washington, not
were pleased with what they found and were
can slide open from the middle to each door
only offered Boeing a plan for the cutting
enthused to see that after being processed and
jamb will be installed, requiring an opening
work, but also for the safe disposal of slurry
treated, the slurry was also being recycled.”
width of 240 inches. Each door panel will be
and other waste materials. This was a priority
After initially being considered for the slurry
powered by its own electrical motor.
for Boeing, especially as it had recently closed
handling and treatment only, and having
w w w. CSD A .ORG
c on c r e t e o p e n i n g s | 2 3
The cutting area for the tow path measures 1,400 feet long by 110 feet wide.
been given the client’s approval, the general
disposal facility. The unit is specifically con-
water is pH adjusted, while the extracted
contractor for the work, Merlino Construction
figured to extract the concrete chips, grit
solids are also treated. The slurry water flows
Company, Inc, offered Salinas this job and the
and other miscellaneous material that cause
to an in-ground slurry suspension pit so a filter
cutting work for the exterior demolition and
problems for the filter press system. The unit
press can extract the fines material and form
new tow path.
is capable of producing approximately 16
cakes for compliant disposal. The team from
The first task for the team from Salinas
cubic yards of recycled water per hour with a
Salinas pumps the clear water back into mobile
has been to perform demo cuts from 10 to 12
5.5-kilowatt drive motor, leaving a maximum
truck tanks in preparation for the next job.
inches deep in the tow path, where the team
standard grain size of 0.35 millimeters.
The whole process of recycling daily waste
has encountered #6 rebar. This first phase, once
The Liebherr LRS 606 reclamation unit
completed, will amount to a cutting area of
has been installed near a water pit at Salinas’
1,400 feet long by 110 feet wide. This cutting
facility and a roll off container is positioned
The safe disposal of slurry is the main
will help form a tow path from the hangar
to catch all the grit and concrete chips. After
concern for Boeing, so the addition of slurry
door to the west side of the plant. Sawing of
the grit and concrete chips are removed, the
recycling to the contractor’s range of services
material from the Boeing cutting work takes around four hours.
the slabs is being performed by three operators with Husqvarna FS 660 T-3, 3-speed diesel saws and two trucks. Slurry is being collected by diesel-powered vacuum systems, designed and manufactured by Grabber Power Products, and stored in a 700-gallon collection tank for safe removal to the recycling facility. Once work on the tow path has been completed, the contractor will turn its attention to the 500-foot-long by 200-footwide rack area, and the sawing and sealing of joints, for the new concrete pavement. The joints will be 0.5 inches wide with a 0.25 bevel. To carry out the recycling of slurry and waste materials produced from its cutting work, Salinas has bought a LRS 606 reclamation unit from CSDA member company Liebherr Concrete Technology Co. for its new Slurry is being collected by wet vacuums and stored in 700-gallon tanks.
2 4 | d e c e mb e r .10
has paid dividends. The city of Seattle already requires a slurry collection, containment and disposal plan for handling slurry from saw cutting, and now these regulations are being introduced throughout the Puget Sound area. These tight controls are especially important to the state of Washington, as many of its boundaries consist of large rivers and estuaries that flow to the Pacific Ocean. These waterways serve as routes for salmon and other fish to migrate each year, so a safe pH level must be maintained to preserve this environment. Salinas Sawing & Sealing, Inc. is using three FS 6600 T-3 flat saws from Husqvarna to cut reinforced concrete at the Everett assembly plant. In addition, the company has so far removed 32,000 gallons of slurry from the job site and recycled 21,000 gallons of water at its recycling facility using a Liebherr LRS 606 unit. Slurry was collected by vacuums from Grabber Power Products. At the time of writing this story, Salinas has completed 75 percent of the tow path cutting work at the Boeing facility. The Boeing Tow Path project is a good example of how this CSDA member is becoming environmentally proactive with regards to saw cutting slurry disposal, and the hope for Salinas is that the introduction of its recycling facility will give it an advantage over the competition as tighter regulations on slurry disposal are enforced. “We have a dedicated staff member that mans
w w w. CSD A .ORG
c on c r e t e o p e n i n g s | 2 5
our facility to control the recycling process and monitor our pH levels,” said Campbell. “Our facility has been designed specifically to handle large amounts of slurry from cutting jobs like the Boeing project and recycle it in a safe manner. Our customer has been pleased with our approach from the start, both in cutting and recycling,” Campbell concluded. Tauna Prince, regional sales manager for Liebherr Concrete Technology, is pleased to see a fellow CSDA member using her company’s product to meet slurry control regulations, reclaim water and increase revenue. “At a time when Federal and state governments are looking closely at contractors and how they deal with waste products, it’s good to see companies like Salinas being proactive and offering extra services to their customers.” She continued, “Liebherr is proud to be part of a solution for contractors that want to be greener while increasing profit.” The new tow path and assembly route for the Boeing KC-767 Military Aerial Refueling Strategic Transport Aircraft is expected to be ready by 2012.
So far, 32,000 gallons of slurry produced on the job have been turned into 21,000 gallons of reusable water.
REVIEW AND COMMENT ON THIS ARTICLE AT: WWW.concreteopenings.com/FORUM.CFM Company Profile
A CSDA member since 1999, Salinas Sawing & Sealing, Inc. is based in Mukilteo, Washington, and performs work in Washington as well as Oregon, Montana and Alaska. The business began in 1996 and has 31 employees, 18 trucks and 26 other support vehicles. Salinas offers services that include slab sawing, wall sawing, hand sawing, joint resealing and slurry recycling. Resources
General Contractor: Merlino Construction Company, Inc. Sawing and Drilling Contractor: Salinas Sawing & Sealing, Inc. Mukilteo, Washington Phone: 425-745-0706 Email: tracy@salinasconcrete.com Website: www.salinasconcrete.com Methods Used: Slab Sawing, Slurry Recycling
Salinas has a recycling facility, complete with filter presses and a water reclaimer.
2 6 | d e ce mb e r .10
Scan It. Cut It. Core It. Concrete Inspection for the Sawing and Drilling Contractor The StructureScanTM Family by GSSI: StructureScan Mini StructureScan Optical StructureScan Standard
World of Concrete 2011
Booth C4148 Geophysical Survey Systems, Inc. www.geophysical.com • sales@geophysical.com
The Business of Business
Improvement as a Two-Minute Drill: Lessons for Leaders By Clinton Longenecker, Ph.D.
“Any change worth making is worth doing right and doing it fast!” —A leader’s observation Developing Two-Minute Drill Mindset For the past decade, change and improvement efforts in nearly every segment of the economy have been studied. It has been discovered that the most successful change efforts happen fast. While speed is not the cause of success, the factors that create and lead to speed in the change process are almost always factors that organizations can and must control if leaders are serious about improvement, and businesses in the sawing and drilling market are no exception. One of the most daunting challenges facing leaders today is that of planning and executing effective change “sooner rather than later.” Nowhere is this more true than in the construction and renovation industries. These challenges are playing out in two different scenarios across the U.S. In the first scenario, many businesses are firmly in the grasp of an economic downturn that requires cost-cutting, productivity improvement, restructuring and re-alignment so that organizations can survive. In the second scenario, businesses find themselves going into an upturn that requires them to replace lost capacity, make supply chain adjustments, deal with new realities and solve a wide variety of unforeseen and unanticipated problems. Both of these scenarios have two major things in common: they require effective leadership and speed. The Two-Minute Drill: Lessons on Rapid
a team was behind on the scoreboard and time
vated players, teamwork, execution, moving
Organizational Improvement from America’s
was running out. The trailing team returns to
the chains, monitoring the scoreboard and
Greatest Game chronicles over 1,000 organiza-
the playing field, executes an effective two-
doing all of these things with extreme time
tional change initiatives. During the compila-
minute drill and comes from behind to win
sensitivity. Winning teams do not come out on
tion of these change initiatives, it was found
the game in the remaining time.
the field to simply go through the motions, but
that successful change often mirrors the char-
Two-minute drills require effective prepa-
come out energized and do what is necessary
acteristics of a two-minute drill from American
ration, great quarterbacking, clear focus, a
to win. What if these same attributes could
football. Think of a close football game where
sense of urgency, well-designed plays, moti-
be brought into your company’s improvement
2 8 | d e ce mb e r .10
efforts? Here are some of the key principles
Leadership Lesson #2:
but is critically important to success. While
that can help a business approach its next
Clearly Define Winning
business leaders are quick to realize that their
improvement effort with a two-minute drill
Successful change efforts are triggered by
competitors are their opponents, they might
mindset and increase the likelihood of success.
the same realization that if performance is
be less quick to realize that people within their
Leadership Lesson #1:
not where it needs to be, things must change
own organization might attempt to stop or
and clearly defined outcomes must be estab-
undermine their improvement efforts. They
lished in a timely fashion. Two-minute drills
might even find that their team or even their
always start with knowing exactly what score is
own leadership style might be a weakness.
needed to win, where the team is on the field,
Just like in football, effective change leaders
how much time there is left to work with and
effectively scout opponents and assess their team
how many timeouts remain. Successful change
so that they can formulate a clear game plan
leaders start every improvement initiative by
based on knowledge of themselves and their
clearly defining desired performance out-
opponent’s strengths and weaknesses. Before
comes. This allows their team to know what
launching into any change, do you know who
winning looks like and help set the stage for
and what you and your team are up against?
developing a game plan to achieve it. In going
Leadership Lesson #4:
Be the Quarterback The key research finding is that real and rapid change does not happen without effective, trustworthy, hands-on leadership from the person in charge of that unit. Consultants, professors and facilitators can help the change process but they are no substitute for effective line leadership. Just like in football, the role of a quarterback is central to success in business. Successful leaders in their role as quarterbacks must: take charge, be energized, understand the game plan, make effective decisions, communicate intensely, encourage
into a change, do you know the real score and start every change initiative by clearly stating
Create Clear Focus and Sense of Urgency
hustle, encourage teamwork, be able to take
the purpose and defining winning?
a hit and create the momentum necessary to
Leadership Lesson #3:
outcome is necessary for success, they must
take a plan from paper to reality. Are you
Scout Opponents
create a clear focus and a sense of urgency
Once a leader defines what performance
seizing control of the change you are trying
Successful change leaders know their
around the improvement game plan. If an
to make or are you depending on others to
opponents as well as their strengths and
improvement effort is to get real results, it
do your job?
weaknesses in developing improvement plans.
must be given proper priority and a sense
Research makes it clear that scouting opponents
of urgency and importance. Real and rapid
is frequently overlooked in leading change,
change can take place when people have clear
ess! Celebrating 65 Years in Busin
Visit us at Booth #S11807
Featuring a Full Line of
Hydraulic Tools & Power Supplies www.rgcproducts.com • 1-800-RGC-TOOL w w w. CSD A .ORG
c on c r e t e o p e n i n g s | 2 9
or success. Successful changes are characterized by the fact that people will be congratulated for helping their organization improve. But scoring celebrations should be moderated until the game is finished and the effects of the change effort have been maintained and become part of the organization’s daily operating fabric. Do you insure that changes work and are properly reinforced? Leadership Lesson #8: Always Conduct a Post-Game Analysis to Learn One of the hallmarks of winning teams is that they are constantly looking for new and better ways of doing things to learn not only from their successes, but also from their struggles. A successful team will always review game films and statistics, not simply
focus on achieving a specific, desired outcome
change, do you develop your plan of attack
and they have a sense of urgency about
and team make-up with great vigilance?
making that change happen. Urgency has an
Leadership Lesson #6:
right, what could have gone wrong and what
Execute Every Play and Create
could have been done better. Organizational
Momentum
change efforts should be reviewed and ana-
energizing effect on the team so the pace, tempo and intensity of the effort increases exponentially. When organizations approach the change process, these key ingredients are frequently found lacking. In leading change, do you create a clear sense of focus, importance and urgency for your team?
lyzed so that lessons can be learned, docu-
plan must be properly executed to set the
mented and shared with others. Do you and
stage for the next play, which is important
your team learn from your improvement wins
when creating momentum. Whether it is
and losses?
identifying a problem, brainstorming a solution, planning, training or any other improve-
Develop a Winning Game Plan and
ment activity, execution requires individuals
Get the Right Players on the Field
to effectively perform their assigned duties in
Most improvement efforts use some varia-
a timely fashion. Successful execution means
tion of the problem-solving process using a
that individuals/teams clearly understand
series of activities that should include needs
that their performance on their assignments
assessment, gap analysis, idea generation and
will determine success and will be measured
selection, implementation planning, execu-
and critiqued accordingly at each step of the
tion, measurement and follow-up. Leaders
improvement process. Many improvement
should think about each of these activities as
efforts falter because leaders do not measure
a play that is created for a specific purpose
the progress of each and every play in their
with a starting and stopping point. Each play
improvement plan and make timely adjust-
is designed to advance the change effort in
ments. As a change leader, do you execute and
a timely fashion toward the ultimate goal of
measure performance during your improve-
better performance and/or fixing a problem.
ment process and to keep your team hustling?
Successful leaders lay out their game plan implementing a corporate change or designing their own. Leaders then get the right people matched to the demands of each improvement play. Successful change comes about when a leader and his or her team design a game plan to meet the specific demands of the improvement situation and put the best possible people on the field to execute the plan. In leading
3 0 | d e cemb e r .10
but also to better understand what went
Each play or activity in an improvement
Leadership Lesson #5:
with extreme forethought, whether they are
wanting to relive the glory of the moment
Leadership Lesson #7: Score, Close Out the Game, Then Celebrate Closing out the improvement game is critically important, because it means that leaders and their teams take the necessary steps to insure that an improvement effort is successful before victory is celebrated. Leaders must let performers know when they score, must make the changes stick and learn to celebrate victory
No Spectators Allowed Whether leading a business in a downturn or upturn, the aim of this article is to have companies think about change and improvement as a two-minute drill. Research makes it clear that organizational improvement is not a spectator sport and requires real leadership that is willing to address each of the key principles identified above. Each of these practices can help accelerate change and produce better results. Remember, you are the quarterback of your life, career and operation. Any effort to truly improve your business needs your great leadership and willingness to play to win! Dr. Clinton O. Longenecker is the Stranahan Professor of Leadership and Organizational Excellence at The University of Toledo. An award-winning business educator, author and executive coach, Longenecker will be the keynote speaker at the CSDA 2011 Convention and Tech Fair in Bonita Springs, Florida, following a recommendation by CSDA member Skip Aston of Ohio Concrete Sawing and Drilling. Longenecker can be reached at clinton.longenecker@utoledo.edu.
World Introduction world of concrete Jan 18-21, Las Vegas Booth #031838 Conexpo Mar 22-26, Las Vegas Booth #112
w w w. CSD A .ORG
c on c re t e o p e n i n g s | 3 1
Tech Talk Tech Talk is a regular feature of Concrete Openings magazine, focusing on equipment, maintenance and operational issues of interest to concrete cutting contractors. Readers wishing to have a particular subject addressed can call or email CSDA with their suggestions at 727-577-5004 or rhitchen@concreteopenings.com.
Anchor Selection and Installation By Marty Rack
E
very day, cutting contractors and their operators use anchors to attach various pieces of equipment to concrete.
These are “post-installed concrete anchors” —meaning they are installed into cured concrete. They are used to attach core stands, wall saw rails and wire saw pulleys during the course of performing concrete removal and other applications. Because of the nature of these applications, the contractor relies heavily on the anchor performing properly to ensure a safe and efficient workplace.
by the manufacturer. Instructions for proper
the anchor capacity can be reduced
installation of anchors are generally included
significantly. The plug can be positioned
with each anchor.
incorrectly by using the wrong setting tool (either for a different
Failure to properly perform either of these steps—anchor design and selection or proper
manufacturer’s anchor or for a different
installation—can result in an anchor that is
size anchor), using a setting tool that is
overloaded or one that has a significant reduc-
worn or ground down, or not driving the
tion in capacity. Either of these situations can
setting tool shoulder to where it meets
As a result, the contractor generally has the
lead to serious problems on the job site.
the top of anchor.
responsibility to select the appropriate anchor
Installation
In most cases, the anchor applications are temporary in nature, where there is, typically, little direction or oversight provided by a project engineer or other specifying body.
•
Proper torque. Applying a higher torque than the manufacturer recommends
for the specific application. While there are
Proper installation is a fundamental
dozens of manufacturers that offer many anchor
requirement for successful anchoring. While
can cause the anchor body to crack. It
types, sizes and variations in North America,
there are not many steps, and these steps
is also important to ensure the rod/bolt
contractors typically choose one of two types
are relatively simple to perform, each one is
inserted into the anchor is backed off at
of mechanical post-installed concrete anchors—
critical. With drop-in type anchors, some of the
least a full turn from being bottomed
a drop-in anchor or wedge expansion anchor.
more critical installation steps include:
out before torquing the anchor,
•
Cleaning the hole of dust and slurry
otherwise there is nowhere for the rod
anchors all have their own specific load capac-
before installing the anchor. Failure to
or bolt to go and the anchor can be
ity, care must be taken to select an anchor that
do so can result in difficulty inserting
damaged.
is sufficient to carry the loads generated by
and setting the anchor, as well as
the intended use. In addition, proper anchor
adversely affecting how well the anchor
minimum number of threads into the
installation is extremely important. For post-
grabs the concrete.
anchor, otherwise stripping of the
Setting the anchor properly. Drop-in
threads can occur. As a general rule,
pre-drilling a hole into the concrete (usually
anchors are set using a setting tool—
thread engagement must be at least the
with a hammer drill), using a specific type and
a metal rod used to drive the anchor’s
diameter of the rod/bolt. For example, a
diameter bit, followed by the anchor being
internal plug to the correct position.
0.5-inch rod must have at least 0.5 inches
installed according to instructions provided
If the plug is positioned incorrectly,
of thread engagement.
Because all the various sizes and types of
installed concrete anchors, installation involves
3 2 | d e cemb e r .10
•
•
Engage the rod or bolt the required
•
Use the correct diameter drill bit. The
figure 1
wrong bit can be a significant issue for mechanical anchors and, depending on the amount of oversize, can result in anchor performance dropping to zero. •
Insert the anchor into the concrete to the prescribed embedment depth. As a general rule, an installed drop-in anchor should never stick up from the concrete surface. Setting the anchor deeper can be appropriate, as long as consideration is given to the reduced load-carrying capacity associated with a deeper-thanflush installation. Wedge expansion type anchors are subject
to the same kinds of installation requirements as above, except there is no plug to set. Design Capacity The second basic requirement is that the selected anchor has adequate capacity to carry the loads that will be applied to it. While this may sound like an obvious step, it is not always an easy task in the concrete cutting business. There are numerous factors that affect the design capacity of the anchor. Some of the most common are: •
Anchor edge distance and spacing limitations. Most anchor manufacturers provide minimum limits on how close an anchor can be set to the edge of the concrete, and to another anchor. Violation of these limits reduces the anchor’s capacity and increases the possibility of breaking the concrete.
•
The strength of the concrete— commonly denoted as compressive strength measured in pounds per square inch (psi)—also plays an important role in anchor performance. In general, higher strength concrete results in higher anchor capacity.
anchor fails), or allowable (incorporating a fac-
published allowable load for some anchors
tor of safety)—a design that loads the anchor
on the market. In addition, since the applica-
to its full ultimate capacity, with no safety fac-
tion is dynamic, the effective load is actually
tor, is very likely to fail.
higher. With the almost endless combinations
While figuring out the design capacity of
of rig, bit, mounting orientation and operator
the anchor is usually straight-forward, decid-
technique, it is likely that in some situations
ing whether it is “enough” can be a challenge.
the loads will be even higher.
First, the data published by anchor manufac-
Given the nature of the concrete cut-
turers is “static” load capacity (meaning a load
ting applications, it is advised that a cautious
that remains constant over time). However,
and conservative approach to anchor selec-
most anchor applications used by contractors
tion should be taken. For this reason, some
involve “dynamic” loads (where the loads
manufacturers do not recommend the use
are changing, such as the operator varying
of 0.5-inch-diameter drop-in anchors to affix
how hard they push/pull on the equipment;
larger core rigs weighing more than 35 pounds
motors running or bits/blades binding). Not
to walls or ceilings. Instead, it is recommended
only can dynamic loads be difficult to deter-
that a higher capacity anchor be used. Options
mine, they are not directly comparable with
to consider are drop-in anchors that are larger
static capacities. As a result, this analysis can
in diameter or a suitable wedge expansion
be complicated.
type anchor.
In many circumstances, accurately antici-
Whether the fastening is permanent or
As mentioned above, the anchor’s size
pating forces that will act on a specific anchor
temporary, it is critical that the correct anchor
(diameter) and embedment depth (how
in a job site application requires an engineer-
is selected and installed properly. This helps
far it is inserted into the concrete) affect
ing analysis. The drawing in Figure 1 shows
ensure safer anchoring applications for con-
the capacity.
a typical application in the industry—a core
tractors and their operators.
Anchor manufacturers typically publish
drill rig mounted on a wall. For most cutters,
information explaining how all these fac-
the load on the anchor will not be obvious
tors affect the performance of each particu-
from looking at the drawing. By studying
lar anchor. Capacity is typically reported for
engineering calculations, it can be concluded
both tension and shear loading conditions. It
that the load on the anchor can, depending
is important to verify whether the published
on how the rig is being operated, be close to
capacities are ultimate (the load at which the
2,000 pounds. That is already more than the
•
w w w. CSD A .ORG
Marty Rack is employed by Hilti as the sales manager for Eastern North America in the company’s diamond professional contractor division. He is based in Tulsa, Oklahoma, and has been with Hilti for 26 years. Rack is experienced in many facets of the construction industry, and can be reached at marty.rack@hilti.com or 800-879-4000.
c on c r e t e o p e n i n g s | 3 3
We’ve got you covered.
Husqvarna’s extensive line of wall saws ensures there is a saw to meet your needs. Wall sawing involves a lot of preparation; Husqvarna makes equipment easy to transport and quick to assemble at the site. Every detail is carefully planned and designed to ensure efficient operation.
Husqvarna’s line of high frequency electric wall saws inlcudes the new WS 482 HF and the WS 440 HF. The new WS 482 HF boasts more power, larger blade size capacity (62") and offers the best power-to-weight ratio on the market. It is radio remote control operated which allows total control of the sawing process and the freedom to move around the workplace. The WS 440 HF wall saw features a powerful, water-cooled electric motor that supplies constant high power to the spindle over a wide rpm range for faster and more efficient sawing. The motor generates 17 hp to the shaft, despite the fact that the saw only weighs 55 pounds. Husqvarna’s WS 460 hydraulic wall saw is built on a modular system where the weight is evenly distributed, making the saw easy to transport, handle and set-up. The two-speed hydraulic motor provides optimal speed depending on material, blade diameter and type of blade. HUSQVARNA CONSTRUCTION PRODUCTS 17400 West 119th Street • Olathe, Kansas 66061 • T 800-288-5040 • F 800-825-0028 2077 Bond Street • North Bay, Ontario P1B 8J8 • T 800-461-9589 • F 800-728-1907 www.husqvarnacp.com Copyright © 2010 Husqvarna AB (publ.). All rights reserved. Husqvarna is a registered trademark of Husqvarna AB (publ.).
Contractor Takes a Bite out of the Chocolate Factory
When the world’s leading supplier of cocoa and chocolate products planned to expand production at one of its locations in the United Kingdom, it needed to find a concrete cutting contractor that could find the “sweet spot” to help with the installation of new equipment. The refurbishment would require precise cutting with minimal debris so that plant production could continue uninterrupted. One CSDA member had a “golden ticket” to enter the chocolate factory—diamond tools.
T
he Barry Callebaut Company has been producing chocolate for more than 150 years and has 40 production sites in 26 countries
that brought in 4.9 billion Swiss Francs (U.S. $5 billion) of sales revenue in 2009. The company has a production plant in Chester, a city in the north of England, where the company had decided to install four new silo tanks to store ingredients for making chocolate. Usually made of stainless steel, silo tanks are used for processing and storing liquids, granular materials and related ingredients. Each of the four 6-meter-tall (19.7-foot) tanks installed at the Barry Callebaut factory measures 1.6 meters (5.2 feet) in diameter and can hold up to 10,000 liters (2,641 gallons) of melted chocolate. The installation of these new silo tanks
3 6 | d e ce mb e r .10
C O N C R E T E
C A S E S
The concrete sections were lowered 40 meters (131 feet) to the floor below.
The contractor performed 28 plunge cuts to create each hole.
would require the refurbishment of specific rooms and floors in the plant, so Barry Callebaut began looking for suitable methods to create circular openings in reinforced concrete floor slabs for the installation. CSDA member D-Drill Master Drillers Ltd. of Coventry, England, suggested a practical and controlled method of demolition to create the openings, while also offering vibration-free techniques and a dustless environment—a vital element for the food production company. “When I originally viewed the work location with the client, the access up to the work area was by staircase only. The floor level of the working area was elevated some five levels up with only the use of a very small goods hoist,” said Neil Wood, branch manager for D-Drill’s Manchester office. “This was going to be our first challenge,” Wood added. The hoist was not serviciable for the contractor’s
Each 1.6-ton cut section was removed by hoist and an A-frame.
operations due to the lifting capacity and the internal dimensions of the hoist. The cutting team met with the client and had it commit
meant that the creation of debris and waste
plant building. In this case, the part of the
to obtaining a safe working load test for a
materials had to be in small quantities and
factory below the work area was a section of
factory-fitted crane rail. The rail would be
be well contained. The use of diamond
the chocolate making production line, so the
placed above an existing opening that had
cutting equipment to create the openings
containment and removal of waste materials
been installed during the construction of the
was the only suitable option for the client.
was crucial.
building. This was to be the transfer route for
Traditional demolition methods would not
To set up for the cutting work, a crash
hoisting cutting equipment to the work area
only have increased debris, but would also
deck was assembled below the work area
and for the disposal of waste materials.
have increased vibration that could have
suitable for the number of operators and the
compromised the structural integrity of the
equipment being used. The deck was then
Working in a food production environment w w w. CSD A .ORG
c on c r e t e o p e n i n g s | 3 7
DTT provides Better Solutions for Professional Cutters
tented and bunded off to contain any water ingress below. All items of equipment and an A-frame were hoisted to the work floor level, some 40 meters (131.2 feet) above ground level, by a three-phase electric chain hoist. The four 1.8-meter- (5.9-foot) diameter openings were created in the 27.5-centimeter(10.8-inch) thick reinforced concrete floor by “stitch cutting,” using a plunge saw from Husqvarna. D-Drill manufactured a steel plate that could hold the plunge saw vertically, and this plate was mounted at the center of the marked circular cut line to maintain a consistant curve and diameter during the
DTT Blades Maximize Cutting Efficiency
work. An A-frame lifting apparatus was situated while performing 28 plunge cuts to
“With the DTT cured blade we are getting significantly longer blade life, 20% or more plus up to 25% additional productivity per shift.” ---Steve Bingham
Senior CSDA Certified Operator Hard Rock Concrete Cutters Wheeling, IL
free each of the concrete sections, and the
In the middle life of blade
DT
B SO ETTE LU R TIO N
frame was secured using four M20 certified lifting eye bolts. When completed, the 1.6-ton sections
T
were immediately lifted out and cut into
DT T
two sections with a ringsaw for removal via the hoist to the ground floor level. This took longer than the cutting work itself, with an average of four hours to cut and lower the two sections. All slurry created by the cutting team from D-Drill was strictly controlled and pumped out of the building into a 1,000-liter
DTT High Production Cured Concrete Blade
Full line available
DT T Diamond Tools Technology
(264-gallon) intermediate bulk container (IBC) tank, which was disposed of as per the current U.K. environmental legislation. Limted access to the work area did provide the team with a challenge, but by maintaining good communication with the client, D-Drill was able to find a solution quickly. The installation of a suitable hoist
Diamond Tools Technology LLC.
723 Hastings Lane, Buffalo Grove, IL 60089 (877) 3456-DTT (388) www.diamondtoolstechnology.com
system enabled the cutting work to proceed as planned. Another obstacle for the contractor to overcome was the supply of water to the cutting face. Water was only available from the basement level of the factory, so D-Drill had to route its slurry and waste water lines through the factory’s fire escape stairwells to
Where do you Read Concrete Openings? Send in photos of you or your employees in interesting places with a copy of the magazine. The photos can be taken during the workday or at play, and will be uploaded to a page on www.concreteopenings.com and added to the “CO Around the World” photo album on CSDA’s Facebook page. The best will be printed in the magazine throughout 2011. Send photos to rhitchen@concreteopenings.com.
3 8 | d e ce mb e r .10
reach the work area. This also had an effect on the collection and containment of slurry, which was stored in the IBC tank until it could be removed form the job site for treatment. The safety of operators and equipment was important while working in an area elevated some distance from the ground, so the implementation of a crash deck and the use of appropriate personal protective equipment
was
critical.
Detailed
risk
assessments and method statements were compiled to determine the safest ways of working with hoist systems at such a height. In addition, thorough testing and certification of the lifting and electrical equipment was carried out. This documentation and testing was essential to address the issues of transporting equipment to and from the work area, moving large cut sections of concrete by hoist and keeping the job site clean and hazard-free. The combined weight of each of the four reinforced concrete cores removed equaled 7.5 tons, which was the result of 23.3 meters (76.4 feet) of plunge sawing and 7.5 meters (24.6 feet) of ring sawing. Cutting of the openings took eight shifts of nine-hour work days, which included all setting up and taking
The 1.8-meter- (6-foot) diameter holes were created to house four silo tanks.
down of equipment. The team from D-Drill used a plunge saw from Husqvarna with a three-phase, 40-liter (10.6-gallon) Partner HP40 hydraulic power pack. In addition, hoisting equipment and an A-frame were employed to lower the cut sections from the work area, while the slurry was removed by two wet vacuums and stored in the 1,000-liter (264-gallon) IBC tank via 80 meters (262.5 feet) of plastic piping and a submersible pump. The cutting work performed by D-Drill was completed within the agreed time frame, and the client was highly satisfied with the results. In particular, representatives from Barry Callebaut complimented the cutting contractors for the cleanliness of the work compared to traditional demolition methods Concrete Openings 2_3 Page December 2010.indd 1 w w w. CSD A .ORG
10/13/2010 1:28:27 PM c on c r e t e o p e n i n g s | 3 9
Company Profile
Formed in 1967, D-Drill Master Drillers Ltd. has been a member of CSDA since 1982. Based in Coventry, England, the company has 94 employees and 70 trucks in 10 locations across the country. D-Drill offers services that include core drilling, slab sawing, wall sawing, hand sawing, wire sawing, controlled demolition, diamond floor grinding and floor preparation services. Resources
Customer: Barry Callebaut Company The circular pieces were cut in half by a ring saw to be lowered and removed from the working area.
Sawing and Drilling Contractor: D-Drill Master Drillers Ltd.
used at the factory in the past. “We projected
with minimal disruption to the client, and
Coventry, England
confidence and professionalism to our client
achieved this by maintaining good levels of
that we would execute this job accurately and
communication and safe working practices.
Phone: 44-2476 612858
within the time scale set. The client was very
D-Drill can mark this cutting project down as
happy with the way the project was run—
a sweet victory.
smoothly and safely,” concluded Wood. The cutting team completed the work
4 0 | d ec emb e r .10
Email: neilwood@d-drill.co.uk Website: www.d-drill.co.uk Methods Used: Plunge Sawing, Ring
REVIEW AND COMMENT ON THIS ARTICLE AT: WWW.concreteopenings.com/FORUM.CFM
Sawing
STRENGTH THAT COMES FROM INNOVATION
With two decades of innovation and experience, ICS continues to lead with new ideas and the strongest products. It’s no surprise that so many professional concrete cutters have switched to FORCE4™ Diamond Chain.
Call 800.321.1240 or Email Marketing@icsbestway.com
icsbestway.com
© 2010 ICS | Blount Inc. All rights reserved. w w w. CSD A .ORG
c on c r e t e o p e n i n g s | 4 1
CORE HEALTH
The Importance of a First Aid Kit By Erin O’Brien
E
very day, concrete cutting contractors
Safety and First Aid Guidelines and Resources
send their employees off to jobs, while other employees stay at the shop to
maintain equipment and perform day-to-day
Concrete Sawing & Drilling Association (www.csda.org) Safety Manual Toolbox Safety Tips Online Safety Articles OSHA Alliance
operations necessary to support the company. Employees take hours of safety courses, training classes and participate in on-site safety talks to prevent or prepare for accidents in the shop, office or on the job site. In a per-
American Red Cross (www.redcross.org) American Heart Association (www.heart.org) In Other Countries:
fect world, an accident would never happen. Unfortunately, accidents happen to even the most well-prepared operator or employee. The two most important ways a company can be prepared for an accident and any
size or type of work performed. It is impor-
resulting injuries on the job are by having at
tant for companies to check national and state
least one employee trained in first aid and
OSHA requirements to make sure they are
making sure every shop, truck and job site has
compliant with both. Medical and first aid
a first aid kit. First aid training can be obtained
issues are the nineteenth most frequently cited
from a local Red Cross chapter or other certify-
of all OSHA violations.
ing association such as St. John Ambulance or
No first aid kit is “OSHA-Approved,” but
the American Heart Association. For example,
it can be “OSHA compliant,” meaning that
the Red Cross offers individual or group train-
the contents of the kit meet or exceed OSHA
ing, and often training can be completed at
first aid kit guidelines. Any kit in a company’s
the concrete cutting contractor’s facility. This
workplace should meet or exceed OSHA first
training teaches participants basic skills to han-
aid guidelines and should also contain vari-
dle an emergency situation and care for any
ous items of personal protective equipment
accident victims and can often be completed
including protective gloves, eye and hand
in just one day or over a weekend. The Red
protection, fluid absorbents, sanitizing and
Cross operates in 186 countries, so just about
disposal products such as biohazard bags and
everyone should have access to a local Red
a cardiopulmonary resuscitation mask. Kits
Cross Chapter.
should also contain items to deal with inju-
Second, a first aid kit will help treat inju-
ries ranging from minor, such as minor cuts
ries in case of an accident or emergency, even
and bruises, to major, such as burns, broken
if a certified first aid responder is not the per-
bones or eye injuries.
son administering treatment. OSHA requires
First aid kits are designed to provide non-
all companies in the United States to have a
emergency care to a person after they have
first aid kit that meets OSHA guidelines on the
been hurt, but before they are able to seek
premises. It is recommended that companies
advanced medical help. Sometimes using the
also keep kits in trucks, since many accidents
kit will be enough to treat the injury, and the
will happen on the job site. State guidelines
injured person will not need additional medi-
vary from national guidelines, but Federal
cal assistance. If the situation is an emergency,
OSHA standard 1910.151(b) states, “Adequate
call 911 immediately. Other workers on the
first aid supplies should be readily available,”
job site should follow any instructions given
and all industries are required to comply with
to them by the 911 operator. A first aid kit is
standard 1910.151 regardless of the company’s
not meant to be a life-saving device; however,
4 2 | d e c e mb e r .10
Australia National Training Information System (www.ntis.gov.au) St. John Ambulance (www.sja.org.au) Canada Lifesaving Society (www.lifesavingsociety.com) Red Cross (www.redcross.ca) St. John Ambulance (www.sja.ca) Hong Kong St. John Ambulance (www.stjohn.org.hk) India St. John Ambulance (www.stjohnambulance.in) Ireland Irish Red Cross (www.redcross.ie) Order of Malta Ambulance Corps (www.orderofmalta.ie) St. John Ambulance (www.sja.ie) Malaysia St. John Ambulance (www.sjam.org.my) New Zealand St. John Ambulance (www.stjohn.org.nz) The Netherlands Dutch Red Cross (www.rodekruis.nl) Singapore St. John Ambulance (www.sjas.org.sg) South Africa St. John Ambulance (www.stjohn.org.za) Sri Lanka St. John Ambulance (www.stjohnsrilanka.org) United Kingdom British Red Cross (www.redcross.uk) St. Andrews First Aid (www.firstaid.org.uk) St. John Ambulance (www.sja.org.uk)
it will be used more effectively when the person administering the first aid care is also trained to do so. First aid kits can be used on the job site to control bleeding, clean and cover wounds, splint a suspected broken bone, reduce swelling or treat burns, bites or stings. Treating these types of injuries early with a first aid kit will often reduce the severity of the injury and decrease the amount of time the injured worker is affected by the injury. As a minimum, each cutting contractor should have one first aid kit in the shop, one in the office and one at each job site. It is recommended that there also be one kit in each truck, as accidents can happen on trips to or from job sites. The kit should be fully stocked at all times and restocked after it has been used. All operators and employees should know where kits are located and how to use them. Kits should be stored in an area that is easily accessible to operators and employees, but also in an area where the kit will not be easily damaged by equipment, debris, water or other hazards. Kits should be periodically inspected to ensure all contents are in good condition and no items are missing. A designated employee, such as the company’s safety director, should be responsible for inspecting and maintaining the kits on a regular basis. Any issues with a kit should be immediately reported to this person. Having first aid kits in the shop and on job sites is an easy way to keep operators and employees safe. Most kits are inexpensive and come prestocked with all necessary materials. By having one or more kits in the shop, office or job site, an employer is able to show its employees that operator and employee safety and well-being is top priority. First aid kits should be a vital part of every company’s safety plan. The Concrete Sawing & Drilling Association (CSDA) offers several documents and resources, such as Safety Manuals, Toolbox Safety Tips (TSTs) and online safety articles for reference and use by its members. CSDA has also recently released a TST specific to first aid, TST #190, “First Aid Kits.” Erin O’Brien, MS, ATC is a Certified Athletic Trainer. She received her Bachelor of Science degree in Athletic Training from Ohio University and her Master of Science degree in Applied Physiology and Kinesiology from the University of Florida. O’Brien is a regular contributor to Concrete Openings magazine, and can be reached at erin@csda.org or 727-577-5004.
w w w. CSD A .ORG
New CSDA Website The Association’s website has gotten a facelift! Visit www.csda.org.
c on c r e t e o p e n i n g s | 4 3
4 4 | d e c emb e r .10
OSHA /CSDA Alliance Latest
T
he Alliance between the Concrete Sawing & Drilling Association (CSDA) and the Occupational Safety and Health Administration (OSHA) is now in its fifth year and continues to educate contractors, prevent on-the-job accidents and injuries and provide vital materials to advance a safe work environment for sawing and drilling professionals. Here is the latest news from the Alliance Program. OSHA Distracted Driving Initiative In March 2008, the OSHA/CSDA Alliance released a Best Practice on the subject of defensive driving (CSDA-OBP-1003) that can be downloaded from the CSDA Website. OSHA is now working with the U.S. Department of Transportation on a campaign to prevent worker-related distracted driving, with a special emphasis on prohibiting texting while driving. As part of this initiative, OSHA Assistant Secretary David Michaels issued an open letter to employers in October, 2010. The letter states that employers have a legal obligation to create and maintain safe and healthful workplaces, and that includes having a clear and enforced policy against texting while driving. The letter also states: “Companies are in violation of the Occupational Safety and Health Act if, by policy or practice, they require texting while driving, or create incentives that encourage or condone it, or they structure work so that texting is a practical necessity for workers to carry out their job.” When OSHA receives a credible complaint that an employer requires texting while driving or organizes work so that texting is a practical necessity, OSHA will investigate and issues citations and penalties where necessary. OSHA’s distracted driving initiative will also include an educational campaign
CSDA Member Companies at WOC 2011 Visit www.csda.org or
calling on employers to prevent occupationally-related distracted driving, working
www.concreteopenings.com
with CSDA and other cooperative program participants to help OSHA reach out
for a list of CSDA members
to employers and workers, a special emphasis on reaching young workers and a
exhibiting at World of Concrete,
Web page featuring a video message and the open letter from Assistant Secretary
January 17–21, 2011.
Michaels. For more information, please visit the OSHA Distracted Driving Web page, http://www.osha.gov/distracted-driving/, or the official U.S. government Website for information on distracted driving, www.distraction.gov. OSHA / CSDA Alliance at World of Concrete 2011 Federal and local representatives from OSHA will be at CSDA booth #C4653 during the World of Concrete trade show and exhibition in Las Vegas on January 17 to 21, 2011. The OSHA representatives will be on-hand to provide advice and guidance, while Board and committee members, and contractors from CSDA will be present to share information about the industry, the association and discuss the benefits of being part of an Alliance program. For more information on the Alliance program, call CSDA at 727-577-5004, email info@csda.org or visit www.csda.org and click on the Alliance logo under the “Partners” section.
w w w. CSD A .ORG
c on c r e t e o p e n i n g s | 4 5
Safety CountS
Ladder / Scaffolding Safety and Fall Protection
A
ccidents involving falls, particularly from ladders and scaffolding, can be some of the most severe in the work-
place. Fortunately, they are also some of the most preventable. Using good judgment, being aware of the work environment and wearing the proper fall protection, when necessary, will help keep operators safe on the job. The rules and guidelines detailed in this article should be followed when working on ladders, scaffolding or working at heights. Ladder Safety OSHA Reference (Subpart X) 1926.1051 – .1053 Ladders are not frequently used in the sawing and drilling industry. However, this lack of use may be more of a problem than first thought. The fact that operators don’t climb or work from ladders very often may cause as much of a safety concern as if they worked from them every day, as the opera-
6. Always face the ladder when ascending or descending. 7. Job-made ladders are not allowed to
4. Each area of the scaffolding must be fully planked. 5. Scaffolding sections stacked over four
tors are not used to working with or around
be built by employees and should not
sections high, or 20 feet (6.1 meters),
ladders. Because of this unfamiliarity, ladders
be used.
must be tied off to the building to
can pose a significant hazard. Here are a few general rules associated with ladder safety. Many of these rules can be
prevent it from falling over. Scaffolding Safety Scaffolding is a temporary structure used
applied to a fixed ladder.
to support people and material in the con-
1. The use of ladders with broken or
struction or renovation of buildings and other
missing rungs or steps, broken or split
large structures. This modular system of metal
side rails or other defects, is prohibited.
pipes or tubes should provide a safe workplace
2. The feet of portable ladders shall be placed on a solid base and the area around the top and bottom of the ladder shall be kept clear. 3. Straight or extension ladders shall be used at a pitch of 4 feet (1.22 meters) vertical to 1 foot (0.3 meter) horizontal. 4. The side rails of ladders used for access to higher levels shall extend at least 36 inches (91.4 centimeters) above the landing or work platform. 5. Access ladders in use shall be tied off, blocked off or otherwise secured at the top to prevent displacement.
4 6 | d e ce mb e r .10
with safe access suitable for the work being done, but can be a potential hazard for sawing and drilling operators if not used correctly. To ensure the highest possible level of scaffold safety, operators should be aware of the following guidelines: 1. Fall protection is required when working on scaffolding over 10 feet (3 meters) off the ground. 2. The assembly and dismantling of scaffolding must be overseen by a supervisor and inspected prior to use. 3. Each section of frame scaffolding must be equipped with two cross braces.
6. Mud sills and base plates must be placed under each leg of the scaffolding. Mud sills must be at least 12 inches by 12 inches (30.5 centimeters by 30.5 centimeters). 7. Damaged scaffolding may not be used. 8. An access ladder or other safe means of entry is required to gain access to the scaffolding. 9. Contractors may not use each other’s scaffolding. Fall Protection Identifying fall hazards and providing protection for operators is the best way to reduce or eliminate the risk of falls. The U.S. Department of Labor lists falls as one of the leading causes of traumatic occupational death, accounting for eight percent of all occupational fatalities from trauma. Any
time a worker is at a height of 4 feet or more, the worker is at risk and needs to be protected. The following rules should be adhered to when assessing the risk of falls in the workplace: 1. A floor is considered protected if it is barricaded or protected by a cover that is capable of supporting twice the maximum intended load. 2. Employees may not work without fall protection in areas where an unprotected floor or wall opening exists with a fall hazard of 6 feet (1.83 meters) or greater. • Wall openings are defined as a wall or window opening with dimensions of 18 inches (45.7 centimeters) by 30 inches (76.2 centimeters) or greater and a fall hazard of 6 feet (1.83 meters). • Floor openings are openings of 2 inches (5.08 centimeters) by 2 inches or greater offering a fall hazard of 6 feet (1.83 meters). • Employees may not work without fall protection near any unprotected area where a fall hazard of 6 feet (1.83 meters) or greater exists. 3. Railings are considered fall protection if they are installed as a top and/or mid rail at approximately 42 inches (106.7 centimeters) and 21 inches (53.3 centimeters) respectively. The railing system must be able to support at least 200 pounds applied at any point in any direction. This does not apply to some scaffolds and boom lifts. Abiding by these rules on the job site and reviewing these rules with new employees will assist in reducing the number of on-the-job accidents. Violation of these safety rules may result in dismissal of an employee and/or the company being investigated by OSHA. Gross misconduct may result in immediate termination of an employee by the company. The information in this article has been taken from the CSDA Safety Manual. This 204-page document has been developed to assist concrete cutting contractors in establishing safety and health programs that will benefit both employees and owners. The manual is intended to provide a starting point for developing company-specific safety programs, and is available to all CSDA members via the online store on the CSDA Website. For more information, visit www.csda. org, call 727-577-5004 or email info@csda.org.
w w w. CSD A .ORG
CSDA Spring 2011 Training Classes Estimating Bonita Springs, Florida
Mar 8–9
Slab Sawing and Drilling 101 Apr 5–7 Elyria, Ohio For more information, visit www.csda.org and click ”training”.
c on c r e t e o p e n i n g s | 4 7
Insurance CornER
Work Truck Accident Litigation: The Duty to Preserve Evidence By Susan Kellner
T
here is an old proverb that goes, “for
If a letter has not been received soon after
want of a nail . . . the kingdom was
the accident, it is advised to wait a reason-
Cameras can be issued to drivers to doc-
lost.” The meaning of the proverb can
able period of time before doing anything
ument motor vehicle accidents. For serious
also be applied to accident litigation involving
to the vehicle. During this time, the vehicle
accidents, an investigator from the company
commercial vehicles. In this case, for want of
must not be destroyed or sold. If there is a
will usually take photographs of the scene. It
a document a case can be lost or, at the least,
plaintiff’s attorney involved, a letter may be
is very important that the name of the pho-
unnecessarily complicated.
sent to the attorney advising that the vehicle
tographer, the number of pictures taken and
Documents
Spoliation, defined as the intentional
will be repaired and put back into service on a
the date the pictures were taken be kept
destruction, alteration or concealment of evi-
specific date—giving at least two weeks notice
together with the photographs in a file. Losing
dence that may be relevant to a legal action
of the repairs. If the plaintiff’s attorney wishes
this information can create difficulties for a
can create an irrefutable presumption that a
to inspect the vehicle, this will have to be done
defense, as in some jurisdictions a jury can
piece of evidence proves a driver or vehicle
prior to the date of repair. After a reasonable
be instructed that a failure to produce pho-
was at fault, simply because they cannot pro-
period of time the vehicle may be repaired,
tographs is equal to a presumption that the
duce evidence to the contrary. The following
but receipts should be retained that reflect
pictures would show something damaging
article addresses both documentary and evi-
the repairs made. However, and this cannot
to the defense. Depending on the nature of
dentiary material, and what is required to be
be stressed enough, before making the deci-
what the photographs depict, they may not be
preserved after an accident to prevent this
sion to repair the vehicle or have it declared a
beneficial to produce, but destroying them is
type of adverse presumption.
total loss and have it crushed, consult with an
not an option. If an attorney wishes to plead
Evidence
attorney to determine if all of the necessary
work product privilege, he or she will need to
evidence has been preserved and a sufficient
be able to tell the judge who took the pho-
amount of time has lapsed so as to avoid any
tographs, when the photographs were taken
potential claims of spoliation.
and the number of photographs taken. The
Most states recognize a common law duty to preserve evidence after an accident— requiring a party to preserve those items that can be reasonably calculated to be relevant to a potential lawsuit or lead to the discovery of other admissible evidence. Depending on the severity of the accident, a plaintiff’s attorney may send a letter immediately subsequent to the incident demanding inspection of the vehicle and request that the vehicle be preserved in its entirety to avoid spoliation of evidence. This is standard procedure in a major accident. In this case, nothing should be done to alter the condition of the vehicle. It is okay to have an expert examine the vehicle and photograph it, but this person should not remove or alter anything. Electronic control modules (ECM) raise spoliation issues, as data may be lost after the initial download and alteration may occur with the required removal of an ECM. The potential for loss and future ability to download should be discussed with an expert and attorney before proceeding with this action.
4 8 | d e ce mb e r .10
PRO TOOLS : unbeatable technology T he Worl d ’ s M os T AdvA n ce d PATT e rn e d di A M o n d T e ch n o l o g y
proFessional saW Blades Bridge deck, wall saw, road & slab sawing
ring saW Blades 10 mm segment height, .235” thickness available for following with a chain saw, includes drive wheel
core Bits 8mm segment height, 14” tube length, sizes up to 10” diameter
Technology: A new generation of diamond Tools Strategic (patterned) diamond placement allows for maximized cutting efficiency. Every diamond is placed exactly where optimum performance can be achieved. This specific placement ensures that the full potential of every diamond is reached. By optimizing each diamond’s usefulness, Zenesis truly is the leader in diamond tool performance.
Fastest cutting • Operator’s experience cutting speeds faster than other traditional tools on the market* longer liFe • Significantly improves both cutting speed and tool life – up to 20% more than products in same category. • No diamond pulls out of the segment until it is completely used, extending the life of the tool.
Patented patterned placement
consistent perFormance • Patterned technology offers the most consistent results for every cut.
Random diamond placement *Comparison to tools in same category.
11913 Cartwright Rd. • Grandview, MO 64030 Office: 816-268-8310 • Toll Free: 866-322-4078
Fax: 816-268-8314 • www.diamondvantage.com
For Want of a Nail For want of a nail the shoe was lost. For want of a shoe the horse was lost. For want of a horse the rider was lost. For want of a rider the battle was lost. For want of a battle the kingdom was lost. And all for the want of a horseshoe nail.
judge may even demand to view the photographs before ruling on whether privilege should apply. The Federal Motor Carrier Safety Administration (FMCSA) creates uniform standards of record keeping that companies need to be aware of, especially with regard to issues of spoliation. It is safe to assume that plaintiffs’ attorneys are aware of them. The following is not meant to be an exhaustive study, but to highlight documents that are required to be retained. •
Results of an investigation of the driver’s safety performance history must be documented and placed in the driver’s history investigation file and retained. This includes a list of any violations and a copy of the driver’s road test.
•
The employer and the driver must have a copy of the medical examiner’s certificate showing the driver is physically qualified to drive.
•
There are retention rules pertaining to driver logs. The logs are required to be maintained by the carrier for a period of six months. Motor carriers must maintain records for each motor vehicle they
control regarding inspection, repairs and maintenance for a period of one year and for six months after the motor vehicle leaves the motor carrier’s control. In-house maintenance records, as well as records of maintenance performed by outside facilities, can be requested. Retain records on trailers as well. Retain any documents evidencing changes to the vehicle’s equipment along with maintenance records, as these too can be requested. In the event of an accident, results of drug and alcohol tests are required to be maintained in a driver’s file. As an aside, be aware that
states can mean a presumption that the destroyed evidence would have been damaging to the party who destroyed it. Following is a checklist of documents that are routinely requested in a lawsuit. Some are clearly privileged, meaning an attorney will argue to the judge that these documents should not have to be produced, but should still be kept. It is advised that the following records be retained:
o o o o o o o o o o o o o o o o o o o o o o o o o
Training materials, including safety manuals and videotapes Walk around inspection report Repair logs Vehicle title Citation for date of accident Dispatch logs for day of accident, week of accident Identification of load and weight of load for date of accident Personnel file for involved driver List of company-owned equipment in the vehicle Cellular telephone records Qualcomm records News videotapes of incident Photographs Witness statements Names and addresses of individuals involved in investigation Law enforcement photographs and reports Autopsy reports Maintenance history on vehicle Black box data Safety meeting records Incident reports Delivery receipts Dispatch records Weight/scale tickets Overweight/oversize reports
employers have a responsibility to arrange for alcohol and controlled substance testing for drivers who are involved in an accident involving injury, loss of life or damage to a vehicle that requires towing.
It is imperative that employers of work vehicle drivers be aware of record keeping requirements mandated by the federal government, as
Be aware that documents created through the regular course of
failure to produce those records subsequent to a motor vehicle acci-
business include email, black box data, wireless communication, GPS
dent may render the company subject to charges of spoliation. There
records, computer generated bills of lading and fuel receipts. If a let-
are also spoliation concerns with regard to the vehicle, photographs,
ter is received from an attorney specifically asking for the retention of
emails and other such evidence, all of which demonstrate the need
communications between the driver and dispatcher, cellular telephone
for caution and common sense in these areas.
records of the driver, the logs of the driver, bills of lading and so on, then these records must be saved. However, if a request is received for discovery three years after the incident and company policy is to destroy those types of records after six months, is it spoliation? It is advised to consult with legal counsel. In a situation where it is known, or reasonably known, that a document may be relevant to anticipated litigation, it must not be disposed. The alternative is to risk a charge of spoliation, which in some states can involve a separate lawsuit in itself or in other 5 0 | d e cemb e r .10
Safeguarding records may serve to protect a company and ensure that the kingdom is not lost. A member of the Florida Bar since 1981, Susan J. Kellner now concentrates her practice in insurance defense. She joined Adams, Coogler, Watson, Merkel, Barry & Kellner, P.A. in 2004, based in West Palm Beach, Florida. Ms. Kellner’s associate, Robert Merkel, will give a presentation on the subject of post-accident investigations at the CSDA 2011 Convention and Tech Fair in Bonita Springs, Florida, in March of next year. For more information, call 561-478-4500 or email skellner@acwmlaw.com.
Industry Bits New Power Cutter from Husqvarna Husqvarna Construction Products introduces the K970, a new power cutter to facilitate the work of cutting professionals. The K970 replaces the K960 power cutter and features a 6.4-horsepower X-Torq® engine that reduces emissions by up to 75 percent and lowers fuel consumption by 20 percent. The K970’s Active Air Filtration™ system extends filter life, saving time and money. The cutter also has a dust-sealed starter and an air purge and decompression valve for guaranteed starts. Other improvements include a rear handle equipped with a soft insert, a tank lid to accommodate filling and a vibration dampening system. The K970 is suitable for cutting concrete and stone, curbstones and pavers, pipework, asphalt and metal. For more information, contact Cate Stratemeier at 913-928-1442 or email cate.stratemeier@husqvarna.com.
ICS® Introduces New Diamond Chain Saw ICS introduces the all-new 695GC diamond chain saw. The 695GC combines patented ICS diamond chain technology with a light, powerful, 94cc gas power head. Suitable for everyday general construction users or professional sawing and drilling contractors, the 695GC can cut up to 16 inches deep and perform narrow cutting and square corners. The new saw is lightweight, but has 6.4 horsepower to cut concrete, stone, masonry and ductile iron pipe. Further, new product enhancements on the saw dampen vibration and sound without sacrificing power and performance. The 695GC is compatible with ICS exclusive FORCE4™ technology. The new 695GC/F4 is the latest in a series of new products launched by ICS as a part of its 20th anniversary. For more information, call 800-321-1240 or email orders@icsbestway.com.
5 2 | d e c e mb e r .10
DITEQ Introduces New ARIX Dry Bits DITEQ Corporation has recently added a new line of dry ARIX core bits to its growing line of diamond core bits. The bits range in diameter from 1.5 to 6 inches and feature a 1.25-inch -7 thread for use on conventional core drill rigs. ARIX core bits are designed to drill through soft to medium concrete with light to medium rebar without the need for water. The bits have diagonal cutouts to allow air flow for ample cooling without compromising bit strength and a turbo barrel for smoother drilling. Bit segments have an aggressive design, gripping the surface to prevent slippage for faster hole starting. For more information, call 866-688-1032 or visit www.diteq.com.
New GMax Blades from Norton Norton is pleased to introduce its new line of GMax diamond blades for the professional user. The blades, which are available from 6 to 13.5 inches in diameter, have an exclusive universal arbor that allows use on multiple saw types, while anchor slot gullets have been created to reduce vibration that cause spalling. Thicker cores, measuring 0.110 and 0.125 inches thick, resist flexing and provide a smooth, precise cut. The 6-inch-diameter blades can run up to 10,185 rpm, and the 13.5-inch-diameter blades are suitable for use on 23-horsepower saws. GMax blades are available to cut soft, medium or hard aggregate. For more information, call 800-854-3281 or visit www.nortonprodiamond.com.
Ohio Concrete Sawing and Drilling Purchases ABC Florida Office Ohio Concrete Sawing and Drilling of Sylvania, Ohio, has purchased the assets of ABC Cutting Contractors in Pompano Beach, Florida. The asset list includes 22 fully equipped service trucks, three airport grinding machines, two tri-axle dump trucks, three skid steers and a 40-year accumulation of sawing and drilling equipment. The name of the Florida acquisition has been changed to ABC Concrete Cutting, Inc., and the new company has rehired 80 percent of previous employees. The company is operating from the same location in Pompano Beach and has kept the same telephone numbers. For more information, call 419-841-5656 or visit the new company website, www.abcconcretecutting.com.
EDCO Introduces 26-Inch Self-Propelled Saw EDCO has reintroduced its 26-inch self-propelled saw by offering more horsepower and extended blade depth. The gasoline version has been upgraded by adding a higher-powered 38-horsepower Kohler engine. Upon request, this self-propelled saw can now be fitted with a 30-inch blade guard to increase its standard cutting depth from 10.5 to 12 inches. By adding more horsepower and blade depth, the SS-26 is more versatile when cutting both concrete and asphalt surfaces. The saw is also built with heavy-gauge steel to combat blade vibration. For more information, contact Jason Stanczyk at 800-638-3326 or email jstanczyk@edcoinc.com.
CSDA 2011 Annual Meeting Notice The annual meeting of the members of the Concrete Sawing and Drilling Association will take place at 11:00 AM on Saturday, March 12, 2011, at the Hyatt Regency Coconut Point Resort & Spa, Bonita Springs, Florida, for the purpose of receiving reports, transacting business and electing officers and directors. For more information, call the CSDA office at 727-577-5004 or email info@csda.org.
w w w. CSDA .ORG
c on c r e t e o p e n i n g s | 5 3
Industry Bits Diamond Tools Technology Expands Sales Organization
Turner
New Hilti DSH 700 and DSH 900 Hand Held Gas Saws The new Hilti DSH 700 and DSH 900 hand held gas saws perform in a variety of construction materials including cutting wet/dry concrete and asphalt for small repair projects, expansion joints and curbs as well as brick and concrete block for small floor or wall openings. The saws also cut metal deck, rebar, bolts, dowel bars, grating and other metals. The DSH 700 and 900 have isolated handles with metal springs that minimize vibration and maximize saw control. A counter-clockwise starting procedure and a primer bulb for fewer pulls have been designed for easy starts. The saws also come standard with a cyclone filtration system (no pre-filter), rope replacement and up to six months of maintenance parts. For more information, contact Hilti customer service at 800-879-8000 in the U.S., 800-461-3028 in Canada, visit www.us.hilti.com in the U.S. or www.hilti.ca. in Canada.
Mechley
Diamond Tools Technology (DTT), is pleased to announce the appointments of three new sales representatives to its growing sales group. Mark Turner is responsible for the Central Midwest region, and is based in Indianapolis, Indiana. He has sales management experience with Norton / Penhall Diamond Tools and contracting experience as manager of Penhall Company’s Indianapolis office. Dan Mechley covers the Greater Cincinnati and Kentucky region. Mechley has several years experience in sales for a construction products company and has sold diamond blades throughout the Midwest. Mike Powell will represent DTT in the North Texas region. He owned and operated his own concrete sawing and drilling business for 25 years. He is based in Weatherford, Texas. For more information, contact Roger Allen at roger@diamondtoolstechnology.com.
Powell
New Wall Saw Track Storage from Grabber Grabber Power Products introduces its new line of wall saw track storage boxes. These 85-pound storage boxes help protect tracks from being damaged, keep them clean, organized and always in easy access. The wall saw track storage boxes measure 96 inches long by 18 inches wide and 11 inches high, and can hold up to six 90-inch wall saw tracks. The boxes are made from high quality aluminum and include heavy duty locking handles. The roller system is made from durable plastic tubing. For more information, call 855-472-2237 or visit www.grabberpower.com.
5 4 | d e c e mb e r .10
Concut, Inc. Announces New WC-X Series Blades Concut, Inc. is pleased to introduce its new WC-X series of cured concrete blades. These blades combine high quality diamonds with tall segments over 0.5 inches to cut fast and provide long-life, even in heavily reinforced applications. The WC-X series has an extensive array of bond formulations and diamond concentrations available, all of which meet aggregate conditions in varying geographic regions. These blades have been developed by Concut’s inhouse engineering department and were initially launched on the West Coast of the U.S. earlier in 2010. The WC-X line has been adapted for aggregates nationwide. These blades are manufactured in-house by Concut in diameters ranging from 12 to 54 inches. For more information, contact Jim Mayer at 800-243-888 or email jmayer@concutusa.com.
I NDUSTRY
B I TS
eed -Sp ogy!
4Technol
10 Years in the US Market!!! Made by Pros for Pros
T9 Core Drill Series • • • •
• • • • •
Optional Drill Stand • Roller carriage adjustable • Available in aluminum or steel column
#1 Core drill in the Houston and Gulf Coast area “If it can hold up there, it will hold up anywhere” Wide gear spread to cover larger range of diameters Competitors 3-speed drills can’t match our rpm range More power and torque than any 3-speed 120V drill Low maintenance cost through state of the art technology
RPM
T9-450-EL
T9-500-EL
Gear
Idle/Load
Idle/Load
1
300/200
220/140
2
500/330
340/230
3
810/540
500/340
4
1360/900
720/480
(Technical data may change w/o notice)
NEW NEW NEW NEW NEW NEW
NEW NEW NEW NEW NEW NEW NEW NEW
Lower
prices on all CArDI equipment!
NEW NEW NEW NEW NEW NEW
Sensors & Software has launched the EKKO_Project software package. Designed to simplify the display, editing, processing and interpretation of all Ground Penetrating Radar (GPR) data; EKKO_Project acts as the command center for working with Conquest GPR data. Project files and compressed files containing line and grid scan data are displayed in an intuitive tree format. Properties are revealed with a simple click and can be edited to correct for errors such as positioning. The display option permits visualization of data as profiles, depth slices or powerful 3-D images. An Interpretation module allows users to present their analysis as points, polylines, boxes or annotations for viewing in both cross-section and map formats. For more information or to receive a trial version of EKKO_ Project, call 800-267-6013 or email sales@sensoft.ca.
•
NEW NEW NEW NEW NEW NEW NEW NEW
Sensors & Software Launches EKKO_Project for Concrete Imaging
120V, 30amp plug, max. 5.0HP 230V available upon request “Smart Electronic” clutch Mechanical clutch as back up Soft start with low amp draw Overload protection at 35amp On/Off switch built in Weighs 33 lbs Compact with carrying handle Large shifting knob with lock
Download catalog and brochure from www.cardi.biz, or call and we mail you the information on this or any of the other Cardi products we offer.
SALES - PARTS - SERVICE Tel: (713) 797-9886 • Fax (713) 797-0191 expertequipment@sbcglobal.net • www.cardi.biz
C.O.ExpertEquipAd10.indd 1
Expert Equipment Introduces New Cardi Core Drill
1/15/10 7:46 AM
Expert Equipment Company has added a new core drill to its professional core drill line. The Vortex 625, made by Cardi, is the first 6-speed drill in the Cardi lineup. The Vortex 625 is powered by the same single phase 120-volt, 25-amp motor with a “Smart Electronic” clutch, as used in the T9 4-speed series. The motor comes with a soft start and overload protection that cuts out at 35 amps. The Vortex 625 features a heavy duty 3-speed gearbox and a second gearbox for high and low rpm. This setup allows an idle rpm range between 1,670 and 210. Under load, the rpm range is between 1,100 and 135 at 25 amps. The new Vortex 625 core drill will be introduced during the World of Concrete 2011 trade show in Las Vegas. For more information, contact Expert Equipment at 713-797-9886 or visit www.cardi.biz.
w w w. CSDA .ORG
c on c r e t e o p e n i n g s | 5 5
346 12
18-2 1
11
NUARY 20 JA
S
I NDUSTRY
B I TS
New Shallow Joint Sawing System from Sanders Saws/Multiquip
Concut, Inc. Announces New Addition to Sales Team
Sanders Saws/Multiquip introduces its new SITS-S saw blade for bevel joints. These new blades are available in two diameter sizes—8 inches and 12 inches. Bevel joints are specified for concrete joints on pavement that require correction to existing joint irregularities. The SITS-S system is designed to perform widening operations in a single pass. Used in pairs, and with the correct spacers, the blades can accommodate most joint widths from 0.25 inches to 1 inch in thickness, or can create bevels from 0.0625 inches to 0.375 inches. The blades can be used dry in cured concrete and asphalt. For more information, contact Christopher Priest at 310-850-5483 or email cpriest@multiquip.com.
Concut, Inc. is pleased to announce that Dan Steiner has joined the company as its new national distribution sales and account manager. Dan comes to Concut with a wealth of industry experience, including 31 years with Husqvarna Construction Products in various sales and Steiner management positions and four years as president of DITEQ. Steiner will be responsible for working with Concut’s national network of independent representatives, as well as with dealers and supply centers throughout the country. For more information, contact Jim Mayer at 800-243-888 or email jmayer@concutusa.com.
New Pentruder Hi-Cycle Core Drills Pentruder’s new line of hi-cycle core drills will soon be available to North American customers. Each of these new drills combines the benefits of hi-cycle power with the ease and convenience of electrical power. No separate power inverter is required. Specific models of these drills are designed to work with a wide range of available AC power. Model MDU 30U 100-120 can be powered from a 120-volt, single phase 60-hertz outlet or generator. Model MDU 30U 200-240 can run on either 60 hertz or 400 hertz, 220-volt single phase power. Model MDU 3065U 200-480 runs on 200-480 volts, single or 3-phase, 60- or 400-hertz power. Each model features a wide rpm range and lowmaintenance brushless motors. The drills are matched with a lightweight carriage, column and base, or customers can opt to use their existing carriage setups. The drills will be on display at Pentruder Inc.’s World of Concrete booth #O30132. For additional information, contact Terry Martin at 562-445-6429 or email terry@pentruderinc.com.
w w w. CSDA .ORG
Bosch Adds New Rebar Cutters to Lineup Bosch has added straight shank rebar cutters to its lineup for use with hammer drills and rotary drills. Designed to work in rotation mode, Bosch’s rebar cutter employs a steep spiral design to quickly remove debris. A relief hole is incorporated into the cutting surface to dissipate heat and facilitate slug removal. The body design and shank are tapered to reduce weight for smoother drilling and to reduce vibration. Bits come in 12-inch lengths with drilling diameters from 0.375 inches to 1.5 inches. The line also includes 18-inch lengths for 0.5-, 0.625- and 0.75-inch diameters, as well as 6- and 12-inch extensions. For more information, visit www.boschtools.com or call 877-249-2499.
c on c r e t e o p e n i n g s | 5 7
I NDUSTRY
B I TS
New Concrete Chain Saw Available from Expert Equipment Expert Equipment Company introduces a new tool from Cardi. The company has manufactured a concrete chain saw that is powered by a single phase electric motor. The ESC 35 chain saw is powered by a proven 120-volt, 25-amp motor equipped with a “Smart Electronic� clutch and ground fault interrupter. The chain saw accommodates a 12-inch bar. The applications are primarily indoors where gas powered saws are prohibited. The Cardi ESC 35 will also complement any electric powered wall saw to finish corner cuts. The Cardi ESC 35 will be shown at World of Concrete 2011 in Las Vegas. For more information, call 713-797-9886 or visit www.cardi.biz.
5 8 | d e ce mb e r .10
I NDUSTRY
B I TS
Pentruder Debuts New Lightweight Core Drill Carriage System Pentruder is introducing an innovative new lightweight carriage system at World of Concrete 2011 that features an easy-to-use, adjustable angle support. The system is lightweight, safe and easy to set up. Attach an existing drill to the Pentruder carriage and then place the carriage anywhere along the Pentruder column, securing it in place with locking levers. Current Pentruder wall saw owners can use existing tracks with this new system. For more information, visit Pentruder Inc’s World of Concrete booth #O30132, call 562-445-6429 or visit www.pentruder.com.
w w w. CSDA .ORG
U.K. Association Appoints Julie White to Board of Directors Julie White, managing director of D-Drill Master Drillers Ltd. based in Coventry, England, has accepted a position on the Board of Directors of the British Drilling and Sawing Association. White is the first female to be appointed to the Board. The Drilling and Sawing Association, based in Nottingham, England, was established in 1984 and has over 100 members across the country. A strong supporter of training and industry apprenticeship schemes, White hopes to encourage younger members to participate more in the association. For more information, contact the Drilling and Sawing Association at 44-115 986 7029 or email dsa@drillandsaw.org.uk.
c on c r e t e o p e n i n g s | 5 9
CSDA MEMBERSHIP APPLICATION
PRINCIPAL BUSINESS ACTIVITY
$525
$1,090
$810
$855
$1,375
$1,030
$1,285
$2,040
$1,525
$1,730
$3,295
$2,175
$4,420
$2,750
$5,495
$355
$630
$2,465
*AFFILIATE: A person, firm, corporation, society, government agency or other organization providing services to the concrete sawing and drilling industry.
$130
C S D A • 1 3 5 7 7 F e at h e r S o u n d D r i v e , S u i t e 5 6 0 , C l e a r w at e r , F l 3 3 7 6 2 t e l : 7 2 7 . 5 7 7 . 5 0 0 4 fa x : 7 2 7 . 5 7 7 . 5 0 1 2 w w w . cs d a . o r g 6 0 | d e c e mb e r .10
18reasons
to b e co m e a CS DA M e m b e r
Networking at the Annual Convention and Seasonal Meetings
Specifications, Standards, Tolerances and Best Practices
The number one benefit for members has always been the opportunity to network with cutting professionals at the annual convention and seasonal meetings. This networking provides opportunities to forge new relationships and learn from other experienced professionals.
Specifications, Standards, Tolerances and Best Practices are available for all types of cutting disciplines. Twenty-four documents have been developed and new ones are always in production.
CSDA Training
Members can market their company with How to Market Your Concrete Cutting Business and make presentations with the Diamond Advantage Seminar Planning & Presentation Manual. Four-color brochures and flyers are available for members to promote their business to customers and are easily personalized so members can avoid the cost of developing their own.
Over 2,000 members have graduated from more than 20 classroom, hands-on and online training programs: Cutting Edge, Slab Sawing & Drilling, Wall Sawing, Wire Sawing, Operator Certification, OSHA Construction Safety and Estimating. CSDA offers online training at www. csdatraining.com for those not able to afford the time or the money to send operators to remote classes. Owners/managers can monitor testing, scoring and documentation. Concrete Openings Magazine
Concrete Openings (www.concreteopenings.com) is the only professional magazine dedicated to concrete cutting with a circulation of 16,000 per issue. Members can advertise at significant discounts and the opportunity to have their job stories reach over 7,000 architects, engineers, general contractors and government officials. CSDA Insurance Program
The CSDA Insurance Program offers members coverage that includes Workers’ Compensation, auto, comprehensive general liability, environmental pollution, professional liability, equipment, Employment Practices Liability (EPL) and other lines specifically geared for the concrete cutting industry. CSDA Website
The CSDA Website at www.csda.org contains a wealth of information available 24/7 in the “Members” section. The online discussion boards provide members a forum to discuss technical issues, sell equipment, hire employees or any other relevant topics. CSDA Safety Resources and Toolbox Safety Tips (TSTs)
The 230-page CSDA Safety Manual, CSDA 57-page Safety Handbook and five safety DVDs are designed specifically for concrete cutters and are available to members at a significant discount. TSTs can be used in employee safety meetings and can be an important part of your company’s safety program. New TSTs are released every quarter. Roundtables
The roundtable sessions at the annual convention and other meetings give members a chance to share their wisdom and acquire additional knowledge. Information gained during the roundtables gives members new ideas to implement within their companies and can save them money. FREE World of Concrete Registration
Members receive free registration and reduced seminar fees for the industry’s annual exhibition of concrete-related equipment and supplies. Mentor Program
New members can receive personalized assistance from a current CSDA Board or committee member during their first year of membership.
w w w. CSDA .ORG
Manuals and Promotional Literature
Specifier Resource Guide and Membership Directory
The CSDA Membership Directory is available in print form and on the Website. The searchable web directory is especially valuable as the CSDA Website averages 150,000 page views per month. The Specifications, Standards, Tolerances and Best Practice documents are included in the print version of the resource guide and are also available online. Membership Profile Analysis
A periodic survey of members to collect statistical information on operating and financial information such as wages, profit and loss, safety, equipment and diamond tool costs. Slurry Analysis Report
This is an Association-sponsored, 60-page report for members. The slurry analysis was performed by an environmental engineering firm with data compared to federal standards and contains recommended guidelines for slurry management. Representation with Governmental Organizations
CSDA has formed an Alliance with OSHA to advance the safety of cutting contractors. This partnership includes issuing Best Practice and Toolbox Safety Talk documents, joint exhibitions at trade shows, review of safety materials and roundtables. CSDA also actively participates with NIOSH on field testing. Discount Programs
CSDA offers its members exclusive programs for insurance and online training, plus discounts on freight services, credit collection services, drug testing and safety services. Cooperation with Industry Associations
CSDA is a founding member of the International Association of Concrete Drillers and Sawers (IACDS) and works with other associations around the globe to promote concrete cutting and the sustainability of concrete as a building material. CSDA Next Generation Group
The CSDA Next Generation group is made up of members and nonmembers age 45 and under. The purpose of the group is to continue to grow the association while serving the needs and wants of the younger generation with the goal of continuing the excellence of the Concrete Sawing & Drilling Association. The group meets during the seasonal meetings, at the annual convention and at the World of Concrete.
c on c r e t e o p e n i n g s | 6 1
Certified Operator Companies Companies listed here have invested time and money to send their operators to CSDA’s Operator Certification. If you are committed to professionalism in the concrete cutting industry, consider sending your operators through the training programs offered by the Concrete Sawing & Drilling Association.
A.E. BRICE & ASSOCIATES, INC.
CAL WEST CONCRETE CUTTING, INC.
CORING & CUTTING SERVICES, INC.
DIXIE CONCRETE CUTTING CO.
1510 Aspen St Baltimore, MD 21226 Tel: 410-354-8890 Fax: 410-354-8894 www.sawconcrete.com
1153 Vanderbilt Cir Manteca, CA 95337 Tel: 209-823-2236 Fax: 209-823-0740 www.calwestconcretecutting.com
2711 SE Otis Corley Dr Bentonville, AR 72712 Tel: 479-271-9672 Fax: 479-271-9674 www.sawconcrete.com
5297 Port Blvd S College Park, GA 30349 Tel: 404-761-1100 Fax: 404-669-2550
ABC CUTTING CONTRACTORS– BIRMINGHAM
CAL WEST CONCRETE CUTTING, INC.
CORING & CUTTING of springfield, inc.
DIXIE CONCRETE CUTTING, INC.
3060 Dublin Cir Bessemer, AL 35022 Tel: 205-425-7711 Fax: 205-425-7769 www.abccuttingala.com
3000 Tara Ct Union City, CA 94587 Tel: 510-656-0253 Fax: 510-656-8563 www.calwestconcretecutting.com
2074 N James River Ct Nixa, MO 65714 Tel: 417-725-4534 Fax: 417-725-0073 www.sawconcrete.com
CENTRAL CONCRETE CUTTING, INC. ABC CUTTING CONTRACTORS–MOBILE
26181 Equity Dr Daphne, AL 36526 Tel: 251-625-1100 Fax: 251-625-1103 www.abccuttingala.com
W719 Leroy St Edgar, WI 54426 Tel: 715-352-2552 Fax: 715-352-2625 www.centralconcretecutting.com
CUT-RITE CONCRETE CUTTING CORP.
22 Lockbridge St Pawtucket, RI 02860 Tel: 401-728-8200 Fax: 401-727-2953 www.cutriteccc.com
con-cor company, inc. ADVANCED CORING & CUTTING CORP.
1766 Route 34 Farmingdale, NJ 07727 Tel: 732-681-7733 Fax: 732-681-8733 www.advancedcoringandcutting.com
W146N5790 Enterprise Ave Menomonee Falls, WI 53051 Tel: 262-781-3660 Fax: 262-252-3832 www.con-cor_co.com
CUTTING EDGE SERVICES CORP.
1535 Old S.R. 74 Batavia, OH 45103 Tel: 513-388-0199 Fax: 513-732-1248 www.cuttingedgeservices.com
CONCRETE CUTTING SPECIALISTS, INC. AMBERCROFT LABOURERS’ 506 TRAINING CENTRE
1600 Major Mackenzie Dr E Richmond Hill, ON L4S 1P4 CANADA Tel: 905-883-4268 Fax: 905-883-4894 www.506tc.org ATLANTIC CONCRETE CUTTING, INC.
PO Box 98 Mt. Holly, NJ 08060 Tel: 609-261-7200 Fax: 609-261-7246 www.atlanticconcretecutting.com B.T. RENTALS LIMITED
#13 Buller St Woodbrook TRINIDAD & TOBAGO Tel: 868-628-2703 Fax: 868-622-4244
6 2 | d e ce mb e r .10
10333 Hercules Rd Freeland, MI 48623 Tel: 989-695-5344 Fax: 989-695-5345 CONCRETE PENETRATING CO.
2303 Shorecrest Dr Dallas, TX 75235 Tel: 214-634-2990 Fax: 214-634-0953 www.concretepenetrating.com CONCRETE RENOVATION, INC.
6600 Randolph Blvd San Antonio, TX 78233 Tel: 210-653-6120 Fax: 210-590-2316 www.concreterenovation.com CORING & CUTTING SERVICES, INC.
1107 N Redmond Rd Jacksonville, AR 72076 Tel: 501-779-4072 Fax: 501-985-9781 www.sawconcrete.com
DEANDREA CORING & SAWING, INC.
9630 Dallas St Henderson, CO 80640 Tel: 303-422-3885 Fax: 303-431-9661 www.deandreacoring.com
16 Maple Creek Cir Greenville, SC 29607 Tel: 864-299-6600 Fax: 864-299-5009 EAST COAST CONCRETE CUTTING CO., INC.
7229 Montevideo Rd Jessup, MD 20794 Tel: 410-799-4540 Fax: 410-799-1978 www.eastcoastconcretecutting.com EASTERN CONCRETE CUTTING CORP.
37-31 29th St Long Island City, NY 11101 Tel: 718-361-6123 Fax: 718-361-6101 www.easterncutting.com GRONEMEIER CONCRETE CUTTING, INC.
22 White Pl Bloomington, IL 61701 Tel: 309-829-7991 Fax: 309-829-2685 www.gronemeier.com HAFNER AND SON, INC.
DELTA CONTRACTORS & ASSOCIATES, LLC
605 S Caton Ave Baltimore, MD 21229 Tel: 410-624-0990 Fax: 410-624-0991 www.deltacontractorsllc.com DERRICK CONCRETE CUTTING & CONSTRUCTION LTD.
7039 Gateway Blvd NW Edmonton, AB T6H 2J1 CANADA Tel: 780-436-7934 Fax: 780-435-4389 www.derrickconcrete.com
90 Atlas Rd Northampton, PA 18067 Tel: 1-800-ANCHORS Fax: 610-262-4809 www.hafnerandson.com HARD ROCK CONCRETE CUTTERS, INC.
601 Chaddick Dr Wheeling, IL 60090 Tel: 847-699-0010 Fax: 847-699-0292 www.hardrockconcretecutters.com HARD ROCK SAWING AND DRILLING SPECIALIST CO.
PO Box 718 Keshena, WI 54135 Tel: 715-799-3823 Fax: 715-831-7840 www.hardrocksawanddrill.com
HOLES INCORPORATED
9911 Franklin Rd Houston, TX 77070 Tel: 281-469-7070 Fax: 281-469-6207 www.holesinc.com
LOMBARDO DIAMOND CORE DRILLING CO., INC.
2225 De La Cruz Blvd Santa Clara, CA 95050 Tel: 408-727-7922 Fax: 408-988-5326 www.lombardodrilling.com
PENHALL COMPANY/CONCRETE CORING COMPANY OF HAWAII
TRUE-LINE CORING & CUTTING– KNOXVILLE LLC
99-1026 Iwaena St Aiea, HI 96701 Tel: 808-488-8222 Fax: 808-487-6679 www.penhall.com
1902 Middlebrook Pike Knoxville, TN 37921 Tel: 865-637-2131 Fax: 865-637-1973 www.sawconcrete.com
PROFESSIONAL CONCRETE SAWING
TRUE-LINE CORING & CUTTING– NASHVILLE LLC
HOLES OF SAN ANTONIO, INC.
118 Braniff Dr San Antonio, TX 78216 Tel: 210-349-5256 Fax: 210-349-0727 www.holesofsa.com
M6 CONCRETE CUTTING & CORING
1030 S McComas St Wichita, KS 67213 Tel: 316-263-7251 Fax: 316-264-3517 www.conacc.com
8539 Oliver Rd Erie, PA 16509 Tel: 814-566-5555 Fax: 814-866-5555
INTERNATIONAL DRILLING & SAWING, INC.
OKLAHOMA CORING & CUTTING, INC.
ROUGHNECK CONCRETE DRILLING & SAWING
PO Box 250013 Montgomery, AL 36125 Tel: 334-288-2355 Fax: 334-288-7299 www.idscuts.com
6025 N Douglas Blvd Arcadia, OK 73007 Tel: 405-715-2500 Fax: 405-715-2504 www.sawconcrete.com
8400 Lehigh Ave Morton Grove, IL 60053 Tel: 847-966-6666 Fax: 847-966-6577 www.roughneck1.com
K.C. CORING & CUTTING CONSTRUCTION, INC.
PACIFIC CONCRETE CUTTING & CORING, INC.
TRUE-LINE CORING & CUTTING– chattanooga LLC
7240 Central St Kansas City, MO 64114 Tel: 816-523-2015 Fax: 816-523-8493 www.sawconcrete.com
PO Box 662261 Lihue, HI 96766 Tel: 808-245-7171 Fax: 808-245-9393 www.pccchawaii.com
1903 S Highland Park Ave Chattanooga, TN 37404 Tel: 423-624-7369 Fax: 423-624-7977 www.sawconcrete.com
280 Hermitage Ave Nashville, TN 37210 Tel: 615-255-2673 Fax: 615-255-9685 www.sawconcrete.com
The James R-Meter MK III & Mini R-Meter Professionals Know Before They Start
R-Meter MK III Most advanced Rebar Locator
Mini R-Meter An economical Rebar Locator for professionals We put concrete to the test! www.ndtjames.com • email: info@ndtjames.com 3727 North Kedzie Avenue Chicago, Illinois 60618 800-426-6500 • 773-463-6565 • Fax: 773-463-0009
w w w. CSDA .ORG
c on c r e t e o p e n i n g s | 6 3
Calendar 2011 CSDA Wall Sawing and Drilling 101 Training Class
January 17-20, 2011 Las Vegas Convention Center Las Vegas, NV Tel: 866-962-7469 www.worldofconcrete.com
CSDA Spring Meetings
ConExpo/ConAgg 2011
March 8-9, 2011 Hyatt Regency Coconut Point Bonita Springs, FL Tel: 727-577-5004 www.csda.org Email: info@csda.org
March 22-26, 2011 Las Vegas Convention Center Las Vegas, NV Tel: 414-298-4138 www.conexpoconagg.com Brazil Road Expo 2011
CSDA Estimating Class
March 8-9, 2011 Hyatt Regency Coconut Point Bonita Springs, FL Tel: 727-577-5004 www.csda.org Email: info@csda.org
April 4-6, 2011 Sao Paulo, Brazil Tel: 55-11 2925-3400 www.brazilroadexpo.com.br Email: info@brazilroadexpo.com.br
World of Concrete 2011
January 17-21, 2011 Las Vegas Convention Center CSDA Booth #C4653 Las Vegas, NV Tel: 866-962-7469 www.worldofconcrete.com CSDA Board Meeting
CSDA Slab Sawing and Drilling 101 Training Class
January 19, 2011 Las Vegas Convention Center Las Vegas, NV Tel: 727-577-5004 www.csda.org Email: info@csda.org
April 5-7, 2011 Diamond Products Elyria, OH Tel: 727-577-5004 www.csda.org Email: info@csda.org
CSDA Next Generation Meeting
IACDS Annual Conference
January 19, 2011 Las Vegas Convention Center Las Vegas, NV Tel: 727-577-5004 www.csda.org Email: erin@csda.org National Demolition Association 2011 Convention
March 6-9, 2011 The Mirage Las Vegas, NV Tel: 800-541-2412 www.demolitionassociation.com
6 4 | d e ce mb e r .10
CSDA 2011 Convention and Tech Fair
March 10-12, 2011 Hyatt Regency Coconut Point Bonita Springs, FL Tel: 727-577-5004 www.csda.org Email: info@csda.org Concrete DĂŠcor Show
March 15-18, 2011 Nashville Convention Center Nashville, TN Tel: 877-935-8906 www.concretedecorshow.com
May 6-8, 2011 Brugge, Belgium www.iacds.org CSDA Summer Meetings
June 9-10, 2011 Tulsa, OK Tel: 727-577-5004 www.csda.org Email: info@csda.org International Concrete Sustainability Conference
August 9-11, 2011 Boston, MA Tel: 847-918-7218 Email: llemay@nrmca.org
New Members The Concrete Sawing & Drilling Association is a nonprofit trade association of contractors, manufacturers, distributors and affiliates from the construction and renovation industry. Membership in CSDA is open to concrete cutting contractors, manufacturers and distributors
of concrete cutting equipment and affiliated companies who provide products and services to the concrete sawing and drilling industry. Founded in 1972, CSDA reached the milestone of 500 member companies in 2006.
Affiliate
North American Contractor Big Dog Concrete Cutting, LLC
Z Core, LLC
roc solution ltd.
Kevin Martin 526 E Broadway St Lexington, OK 73051 Tel: 405-527-0522 Fax: 405-527-0524 Email: bigdogccokc@yahoo.com www.bigdogconcretecutting.com
Rob Zyzes 85 Locust Ave Amsterdam, NY 12010 Tel: 518-843-8444 Fax: 518-843-8444 Email: zcoredrilling@yahoo.com
Overseas Contractor
Bradley Tyler 34 Ernest Rd Hornchurch Essex RM11 3JQ UNITED KINGDOM Tel: 44-1708 478 552 Fax: 44-1708 444 898 Email: brad@rocsolution.com
Nova Engineering Ltd.
Manufacturer
ul./str. Peyo Yavorov #1 Business Center “Ogosta” Office 306 Montana BG-3400 BULGARIA Tel: 359-8 7896 5838 Fax: 359-2 4898 229 Email: info@nova-bg.com www.nova-bg.com
Cardinal Saws and Blades
Serena Nowakowski 100 Barren Hill Rd Conshohocken, PA 19428 Tel: 610-828-6606 Fax: 888-504-4434 Email: officemanager@cardinalsaws.com www.cardinalsawsandblades.com
523
csd a memb ership (1 9 9 3 – 2 0 0 9 )
Brad Hutchinson 4805 Scooby Ln Carroll, OH 43112 Tel: 740-654-5304 Fax: 740-687-9130 Email: brad@companywrench.com www.companywrench.com
521
Vladimir Petrov
Company Wrench
555
Kathleen Makowski 1901 Route 71 Ste 2-D Wall, NJ 07719 Tel: 732-280-9810 Fax: 732-280-9812 Email: kmakowski@ hoganconcretecuttingandbreaking.com www.hoganconcretecuttingandbreaking.com
Paul Zeni 389 4th St E Sonoma, CA 95476 Tel: 707-996-2912 Fax: 707-996-7912 Email: paulz@apgen.com www.apgen.com
540
JP Hogan Concrete Cutting & Breaking Corp.
Apollo General Insurance Agency, Inc.
1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
Why I Stay a Member My grandfather started Hafner &
minded people in the industry has paid great
Son, Inc. in 1964 with a core drill
dividends. It has allowed me to partner with
and a 3-inch-diameter bit. Both
other companies on large projects and given me
technology and competition have
the opportunity to borrow or rent just about any
increased dramatically over the years,
piece of equipment I need. Attending the CSDA
so we needed something to give us that
tech fairs is also a great asset to me. It allows me
“edge.” We found it when we joined
to stay current with the latest technology, while
CSDA in 1993, a move that has
also making some really nice deals on equipment.
proven to be a great investment for us.
We use the CSDA Toolbox Safety Tips at weekly
Our cutting division now consists of
safety meetings, as they are loaded with great
12 operators and nine trucks.
information and nice to hand out to the guys. Travis Hafner
My first experience with CSDA came
What really sets CSDA apart from the other
in 1998 when I completed the Operator Certification and OSHA
organizations is the people. The friendships my wife and I have made
safety training courses. I attended my first convention two years later
through the association will last forever. Great organization, great
in the Bahamas and was blown away. Here were hundreds of pro
information, great conventions and amazing people are why we will
cutters just like me. I was like a sponge that week, absorbing as much
always stay with CSDA.
information as possible. Since then I have attended several conventions and met many wonderful people. The chance to network with likew w w. CSDA .ORG
Travis Hafner Hafner & Son Inc. c on c r e t e o p e n i n g s | 6 5
Want to Target the Specialized Industry of Sawing & Drilling? Advertising in Concrete Openings magazine is the only way to reach the specialty market of sawing and drilling contractors who cut concrete, asphalt or masonry because it is the only magazine in the market specifically targeted to this segment of the sawing and drilling industry.
How Do You Reach 16,000+ Sawing and Drilling Professionals? Each issue of Concrete Openings magazine is sent to more than 9,500 sawing and drilling operators, manufacturers of sawing and drilling equipment and suppliers to the industry and more than 6,500 specifiers of concrete cutting services around the world.
Who Reads the Magazine? Concrete Openings reaches sawing and drilling contractors, as well as specifiers of sawing and drilling services including engineers, architects, general contractors and governmental agencies. Why waste your message on unnecessary circulation? Advertising in Concrete Openings guarantees a targeted audience of industry professionals.
Readership by Profession
Circulation 16,000+ minimum, per issue 9,500+
52%
member and prospective member companies made up of sawing and drilling contractors,manufacturers, distributors and affiliates
8%
6,500+ general contractors, engineers, architects and government officials who specify sawing and drilling
Concrete Openings Website Concrete Openings has its own website. Advertisers have direct links to their websites placed on our Advertisers page as a complimentary addition to ad placement. A full copy of the magazine is also available for visitors to read on the website. Visitors to the site can now access our advertisers at the touch of a button. The Concrete Openings Website also has advertising opportunities available throughout the year. Visit www.concreteopenings.com for more information.
40%
• Specifiers • Cutting Contractors • Manufacturers, Distributors Readership by Location
85%
Readership Per Issue In a recent poll, a section of Concrete Openings subscribers revealed that 66% pass on their copy of the magazine to at least one other person, with almost 25% stating that the magazine is passed on to four or more people each issue. This translates to an average of 3.75 people reading each issue of the magazine for a total readership per year of approximately 60,000.
5% 4% 6%
• United States • Asia, Africa, Austrailia • Europe • Canada, South America
To receive additional information about products advertised in this issue, visit the advertisers page on concreteopenings.com, or contact the vendors below. PAGE ADVERTISER PHONE EMAIL 40 Advanced Cutting Technologies, Inc. 31 Brokk, Inc. 43 Company Wrench 56 Diamond Pauber srl 58, 59, Inside Front Cover Diamond Products 38 Diamond Tools Technology 49 Diamond Vantage, Inc. 20 DITEQ Corporation 15 Dixie Diamond Manufacturing 45 EDCO-Equipment Development Co., Inc. 47, 55 Expert Equipment Company 27 Geophysical Survey Systems, Inc. (GSSI) 25 Grabber Power Products Inside Back Cover Hilti North America 34, 35, Outside Back Cover Husqvarna Construction Products 2, 41 ICS, Blount Inc. 63 Iowa Wall Sawing 63 James Instruments, Inc. 25 MALA Geoscience 39 Norton Pro Diamond 51 Pentruder, Inc. 29 Reimann & Georger Corporation 44 Sensors & Software 67 Toolgal USA Corp/DCI 11 Western Saw
6 6 | d e c emb e r .10
204-222-7400 800-621-7856 740-654-5304 39-05 85 830425 800-321-5336 612-408-9253 816-268-8310 816-246-5515 770-921-2464 301-663-1600 713-797-9886 603-893-1109 480-967-2545 918-872-3553 913-928-1442 503-653-4644 319-934-3280 773-463-6565 843-852-5021 800-854-3281 562-445-6429 716-895-1156 905-624-8909 706-283-9556 805-981-0999
ted@advancedcuttingtechnologies.ca henrik@brokkinc.com katie@companywrench.com info@diamondpauber.it jpalmer@diamondproducts.com roger@diamondtoolstechnology.com info@diamondvantage.com jmiller@diteq.com gregwolters@dixiediamond.com hommey@edcoinc.com expertequipment@sbcglobal.net harmonj@geophysical.com jorge@grabberpower.com bennett.myers@hilti.com cate.stratemeier@husqvarna.com joet@icsbestway.com kelli@iowawallsawing.com angie@ndtjames.com sales.usa@malags.com stephen.m.anderson@saint-gobain.com terry@pentruderinc.com peter.kowalczyk@rgcproducts.com sales@sensoft.ca admin@toolgalusa.com cole@westernsaw.com
DIAMOND CHAIN INTERNATIONAL PRESENTS:
TOOLGAL USA DIVISION
DCI
WHY DO YOU THINK THE COMPETITION SPENT SO MUCH MONEY TO CHANGE THEIR EQUIPMENT?
DCI - THE WAY YOU WANT IT
VISIT US AT WOC 2011 INDOOR BOOTH S10827 & OUTDOOR BOOTH O30200 AND GET A SAW CONVERSION KIT FOR FREE WITNESS THE FASTEST CUTTING CONCRETE CHAIN ON THE MARKET AND THE UNVEILING OF OUR NEWEST INVENTIONS.
877-778-3765
www.dciconcretechain.com
info@dciconcretechain.com
Director’s Dialogue
Two Events Kick Off 2011! Patrick o’brien Executive Director
C
SDA and its members are ready to score big in 2011. First up
the future? Then plan to attend the Next Generation meeting that follows
is the January 17-21 World of Concrete (WOC), the major
the Board meeting. Those 45 years old or younger are welcome to attend
industry trade show for the year, at the Las Vegas Conven-
and help CSDA meet the needs of the next generation of owners and
tion Center. A little over a month later, CSDA members head to the
operators in the sawing and drilling industry.
East Coast for the CSDA 2011 Convention and Tech Fair in Bonita
CSDA then travels across the country to Bonita Springs, Florida, for its
Springs, Florida. This annual event is always popular with members,
39th Annual Convention and Tech Fair at the Hyatt Regency Coconut Point
and the warm location and great hotel rates should help draw even
Resort & Spa on March 10-12. CSDA has “drafted” a keynote speaker who
more members and non-members alike.
will help businesses score a “touchdown.” Clint Longenecker will open the
The WOC show is always a busy time and CSDA is doing its part
program with a presentation entitled The Two-Minute Drill: Lessons for
to promote the sawing and drilling industry. First, CSDA’s Wall Sawing
Rapid Organizational Improvement from America’s Greatest Game and
and Drilling 101 training class will be conducted in the classroom as
apply football’s lessons to business leaders who want to succeed in today’s
well as at the outdoor demo area. If you see a bunch of guys (and
competitive marketplace.
girls) dressed in safety gear around a wall saw or core drill, take a
The 2011 convention will also feature technical and business sessions
closer look and you may discover what CSDA training programs are
in its “starting lineup,” led by seasoned contractors and well-established
all about.
manufacturers. Presentations will include robotic demolition, dealing with
CSDA’s booth, #C4653, is always a hub of activity throughout the
business life-cycle challenges, post-accident investigations and concrete
show. OSHA is again sharing booth space and always attracts much
floor polishing. Roundtable topics will include dispatching, green concrete
interest from contractors. The CSDA booth will also feature a fun
practices and hiring practices in the concrete sawing and drilling industry. In
core toss game with prizes and promo items to generate interest in
addition, the Tech Fair will allow contractors to meet with manufacturers,
the upcoming convention.
one-on-one, to learn about their new products and technologies. All
Want to learn what CSDA accomplished in 2010? Then check out
this, plus the CSDA Estimating training class will be held just prior to the
the CSDA Board Meeting on January 19th at 7:30 AM in Room N203.
convention for those wishing to broaden their knowledge in the field of
This meeting is open to anyone who is interested in the association.
estimating.
The Board will review the activities undertaken by the various
Why not make plans to join CSDA at the Las Vegas Convention Center
committees during the year. Interested in where CSDA is headed in
or in Bonita Springs or both? You can help make 2011 a memorable year.
6 8 | d e c emb e r .10
Hilti diamond systems for concrete cutting and coring
Hilti 1,000 Hz – unmatched performance. Hilti. Outperform. Outlast.
Hilti diamond systems are specifically designed with the needs of concrete cutting and coring professionals in mind. Our innovative 1,000 Hz high cycle technology is unlike any other in the industry. Combined with top quality Hilti blades and bits, we deliver unprecedented power and performance for all your concrete coring and cutting applications.
Visit us at World of Concrete 2011, outdoor booths #O30968 and #O31067 Hilti Diamond Systems 1-800-879-4000 www.us.hilti.com • en español 1-800-879-5000 • www.hilti.ca
A powerful team.
The DM 340 is the most powerful electric drill motor in Husqvarna’s range with 3,300 watts of power. The gearbox is water-cooled for reduced wear and the three speeds make it easy to set the optimum drilling speed for drill bits with diameters from 2 to 16 in. The motor features Elgard™ which indicates, via the LEDs, when the machine is overloaded to prevent motor damage and increase product life. It also features Softstart™ and Smartstart™ to facilitate a smooth start. The DS 450 is a rugged and lightweight stand designed especially for the DM 340 drill motor. The two-speed carriage allows the user to select the speed for maximizing drilling performance. The quick disconnect feature enables the operator to disengage the motor from the drill stand easily and efficiently. The stand also features a V-groove roller carriage which enables the motor and core bit to travel smoothly on the column and requires minimal adjustments. The DM 340 and DS 450 make a powerful, user-friendly and efficient team.
Husqvarna DM 340 & DS 450 - keeping you ahead of the game.
HUSQVARNA CONSTRUCTION PRODUCTS 17400 West 119th Street • Olathe, Kansas 66061 • T 800-845-1312 • F 800-257-9284 2077 Bond Street • North Bay, Ontario P1B 8J8 • T 800-461-9589 • F 800-728-1907 www.husqvarnacp.com Copyright © 2010 Husqvarna AB (publ.). All rights reserved. Husqvarna is a registered trademark of Husqvarna AB (publ.).