Galileo LED Batten Proline
Enjoy the Light
Galileo LED Batten Proline Toughcoat Super Strong Aluminum Frame + +
Shoockproof Worry Free Lens
Aluminium Frame RoHS Cataphoresis Silver +
Advanced Epistar SMD2835 LED
+
Quality Light Quality comes from every minor detail, especially for LEDs. To ensure the color consistency and uniformity of the light, a strong Binning Code system is built to record the color and performance of each order. Except for LM80, a series of tests will be done to ensure the performance and reliability of LEDs.
Efficient Phosphors Efficient phosphors will let SCDM<6, increase lumen. 105째C temperature resistance which ensure long life.
Low Voltage LED Chip 3.2V low voltage led, guarantee the long life and high lumen efficacy.
Copper Heat Sink 45 째C per watt heat resistance, best cooler for led chip. Just 8 째C higher than solder point.
Sliver Reflector Higher reflecting rate, brighter than other competitors.
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
80,000hr Life Power supply is not just power up the lamp. Long life, high efciency, absolute security, and international certication compliance, makes the lamp maintenance free. We have the most powerful driver component supply chain, we also optimized the heat control. EMC, anti-drop design. In order to achieve optimal life. We obtained TUV-MARK, UL, CE ,CB, SAA, ENEC certications.
Silergy IC From US The most stable solution for LED panel driver 1000V Surge Voltage Resist Common mode inductor and Piezoresistor
EMC-EMI Passed Safety capacitor and high frequency inductance for flitering
4000V Isolated Solution Isolation transformer
TOSHIBA MOS Let SMPS driver work more effective
50,000 Work Hours Assurance Electrolytic capacitor from SAMXON 8,000hrs work at 70°C
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Galileo LED Batten Proline series
CL-BN60-28W-100
CL-BN90-36W-100
CL-BN120-45W-100
CL-BN150-60W-100
Galileo 60cm LED Batten Proline KEY DATA Power
28W
Luminou Flux
3101m
3000K/4000K/6500K
Colour Temperature
IP 50
IP Rating
600x71x80mm
Dimensions Warranty
5 Years Extened
Part Number 3000K
CL-BN60-28W-100-WW
Part Number 4000K
CL-BN60-28W-100-NW
Part Number 6500K
CL-BN60-28W-100-CW
TECHNICAL SPECIFICATIONS Input Voltage
180~240Vac/90~306Vac
Power Factor
>0.9
Warm white(2700-3000K)
2719lm
Natural white(4000-4500K)
3020lm
Cold white(5800-6500K)
3101lm
LED Manufacturer
Epistar
LED Type
SMD2835
144
No. of LEDs Luminous Efcacy Driver Manufacturer
DIMENSIONS
100lm/W Lifud/Meanwell
Total Circuit Power(W)
28W+/-5%
II
Electrical Class Colour Rendering
80mm
>80 CRI
Lamp Viewing Angle
71mm
Dimmable
120° Dali/0-10V/PWM
Operating Temp. Lifespan 600mm
-25°C to +50°C 55,000 Hours
Diffuser Material
Polycarbonate
Housing Material
Aluminium
IP Rating
IP 50
Weight
1.3Kg
LIGHT DISTRIBUTION CURVE -150°
180°
150°
FEATURES & BENEFITS -120°
120°
E
Superior SMD2835 LED Chip
E
Extruded aluminium housing,anodized
90°
-90°
170 340 510
-60°
60°
680
-30°
C0/180
850 0°
corrosion resistant
E
0-10V / DALI / Traic dimming
E
Emergency & occupancy sensing
E
Stainless steel retaining xtures
30°
C90/270
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Galileo 90cm LED Batten Proline KEY DATA Power
36W
Luminou Flux
3704m
3000K/4000K/6500K
Colour Temperature
IP 50
IP Rating
600x71x80mm
Dimensions Warranty
5 Years Extened
Part Number 3000K
CL-BN90-36W-100-WW
Part Number 4000K
CL-BN90-36W-100-NW
Part Number 6500K
CL-BN90-36W-100-CW
TECHNICAL SPECIFICATIONS Input Voltage
180~240Vac/90~306Vac
Power Factor
>0.9
Warm white(2700-3000K)
3460lm
Natural white(4000-4500K)
3590lm
Cold white(5800-6500K)
3704lm
LED Manufacturer
Epistar
LED Type
SMD2835
180
No. of LEDs Luminous Efcacy Driver Manufacturer
DIMENSIONS
100lm/W Lifud/Meanwell
Total Circuit Power(W)
36W+/-5%
II
Electrical Class Colour Rendering 80mm
>80 CRI
71mm
Lamp Viewing Angle Dimmable
120° Dali/0-10V/PWM
Operating Temp. Lifespan
900mm
-25°C to +50°C 55,000 Hours
Diffuser Material
Polycarbonate
Housing Material
Aluminium
IP Rating
IP 50
Weight
1.9Kg
LIGHT DISTRIBUTION CURVE -150°
180°
150°
FEATURES & BENEFITS -120°
120°
E
Superior SMD2835 LED Chip
E
Extruded aluminium housing,anodized
90°
-90°
300 600 900
-60°
60°
1200
-30°
C0/180
1500 0°
corrosion resistant
E
0-10V / DALI / Traic dimming
E
Emergency & occupancy sensing
E
Stainless steel retaining xtures
30°
C90/270
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Galileo 120cm LED Batten Proline KEY DATA Power
45W
Luminou Flux
4608m 3000K/4000K/6500K
Colour Temperature
IP 50
IP Rating Dimensions
1200x71x80mm
Warranty
5 Years Extened
Part Number 3000K
CL-BN120-45W-100-WW
Part Number 4000K
CL-BN120-45W-100-NW
Part Number 6500K
CL-BN120-45W-100-CW
TECHNICAL SPECIFICATIONS Input Voltage
180~240Vac/90~306Vac
Power Factor
>0.9
Warm white(2700-3000K)
4419lm
Natural white(4000-4500K)
4520lm
Cold white(5800-6500K)
4608lm
LED Manufacturer
Epistar
LED Type
SMD2835 240
No. of LEDs Luminous Efcacy Driver Manufacturer
DIMENSIONS
100lm/W Lifud/Meanwell
Total Circuit Power(W)
45W+/-5% II
Electrical Class Colour Rendering
>80 CRI
Lamp Viewing Angle Dimmable
71mm
80mm
120° Dali/0-10V/PWM
Operating Temp. Lifespan
1200mm
-25°C to +50°C 55,000 Hours
Diffuser Material
Polycarbonate
Housing Material
Aluminium
IP Rating
IP 50
Weight
2.5Kg
LIGHT DISTRIBUTION CURVE -150°
180°
150°
FEATURES & BENEFITS -120°
120°
E
Superior SMD2835 LED Chip
E
Extruded aluminium housing,anodized
90°
-90°
300 600 900
-60°
60°
1200
-30°
C0/180
1500 0°
corrosion resistant
E
0-10V / DALI / Traic dimming
E
Emergency & occupancy sensing
E
Stainless steel retaining xtures
30°
C90/270
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Galileo 150cm LED Batten Proline KEY DATA Power
60W
Luminou Flux
6112lm
3000K/4000K/6500K
Colour Temperature
IP 50
IP Rating
1500x71x80mm
Dimensions Warranty
5 Years Extened
Part Number 3000K
CL-BN150-60W-100-WW
Part Number 4000K
CL-BN150-60W-100-NW
Part Number 6500K
CL-BN150-60W-100-CW
TECHNICAL SPECIFICATIONS Input Voltage
180~240Vac/90~306Vac
Power Factor
>0.9
Warm white(2700-3000K)
5829lm
Natural white(4000-4500K)
5958lm
Cold white(5800-6500K)
6112lm
LED Manufacturer
Epistar
LED Type
SMD2835
300
No. of LEDs Luminous Efcacy Driver Manufacturer
DIMENSIONS
100lm/W Lifud/Meanwell
Total Circuit Power(W)
60W+/-5%
II
Electrical Class Colour Rendering
>80 CRI
71mm
Lamp Viewing Angle Dimmable
80mm
120° Dali/0-10V/PWM
Operating Temp. Lifespan 1500mm
-25°C to +50°C 55,000 Hours
Diffuser Material
Polycarbonate
Housing Material
Aluminium
IP Rating
IP 50
Weight
3.1Kg
LIGHT DISTRIBUTION CURVE -150°
180°
150°
FEATURES & BENEFITS -120°
120°
E
Superior SMD2835 LED Chip
E
Extruded aluminium housing,anodized
90°
-90°
400 800 1200
-60°
60°
1600
-30°
C0/180
2000 0°
corrosion resistant
E
0-10V / DALI / Traic dimming
E
Emergency & occupancy sensing
E
Stainless steel retaining xtures
30°
C90/270
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Installation Ceiling Accessories
600
900
120
150
X 2 X 4
1 Drill 2 holes on the ceiling(ÎŚ8,depth 45)
3 Screw the light on the U connection with M6 outer hexagonal bolts,as above.
Accessories
600
900
120
150
X 4 X 2
2 Screw the U connection on the ceiling with Expansion screw.
4 Connected the wires as the following picture
Green/Yellow(E)
Brown(+) Blue(-)
Brown(+)
Blue(-) Green/Yellow(E)
5 Finished
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Installation Square steel ceiling Accessories
600
900
120
150
X 4 X 8 X 8
1 Drill four holes in 80*80mm square steel for screws, and drill one hole for crossing wire.
3 Connect wires as the following pictures.
2 Fix lamp and square-connection with M6 out hexagonal bolts.
4 Fix square-connection on the square steel with M6 hexagonal screw.
Green/Yellow(E)
Brown(+) Blue(-)
Brown(+)
Blue(-) Green/Yellow(E)
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Installation SUSPENSION Accessories
600
900
120
150
Accessories
600
120
150
X 4 X 2
X 2 X 4
1 Fit the suspenders on the ceiling, and then sheathe pipes. Fix U-connection with M10 hexagonal screw.
900
2 Connect wires as the following picture.
Green/Yellow(E)
Brown(+) Blue(-)
Brown(+)
Blue(-) Green/Yellow(E)
3 Fix the lamp and U-connection with gasket and M6 out hexagonal bolts from lamp side.
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Installation SUSPENSION Connection 1 Install a pendant cord or suspender and keep
2 Fix U-shaped bracket to the pendant
themat the same length,the center distance between pendant cord or suspender is according to the length ot the light.
cord or suspender
Ceiling
Ceiling
Pendant cord or suspender U-shaped Bracket
4 Insert limited components to both side of
3 Slip two limited components into the light,and
the U-shaped bracket,tighten the screws, connect AC power cord to mains supply, installation completed for single luminaire. (see the picture below)
then insert the light to U-shaped bracket. (see the picture below)
Ceiling
Ceiling
AC power cord Tighten the nuts down
Insert Limited components U-shaped bracket
LED batten proline
5 Slip two limited components into the light,and then insert the light to U-shaped bracket.(see the picture below)
AC power cord
AC power cord
Tighten the nuts down
Couper
Galileo Wiring PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING TO INSTALL THIS PRODUCT, NO RESPONSIBILITY IS TAKEN FOR DAMAGE CAUSED BY INCORRECT HANDLING, WIRING OR INSTALLATION
Operating Voltage Galileo LED Batten Proline series - 100-240V AC Galileo LED Batten Proline series - 180-240V AC
Connection Details
Brown(+) Green/Yellow(E)
Blue(-)
!! IMPORTANT !! DO NOT ATTEMPT TO INSTALL THIS PRODUCT WITHOUT ADVICE FROM A FULLY QUALIFIED ELECTRICAL ENGINEER, FAILIURE TO DO SO MAY CAUSE PERSONAL HARM OR DAMAGE TO THE PRODUCT. IT IS IMPORTANT THAT THESE GUIDELINES ARE FOLLOWED AT ALL TIMES DURING INSTALLATION. THIS INFORMATION IS FOR YOUR SAFETY AND TO ENSURE THAT THE PRODUCT IS INSTALLED CORRECTLY. THE PRODUCT MUST BE WIRED AS PER THIS DIAGRAM. IF THE PRODUCT IS WIRED INCORRECTLY IT WILL NOT FUNCTION AND CAUSE SEVERE INTERNAL DAMAGE TO THE DEVICE.
HF(High Frequent)-Sensor
Automatic HF sensor light sensor is the use of the latest lighting technology combined with high-tech products, widely used in the staircase, hallway, office, corridors and other public places. Built-in body sensor. People come in, the light turn on, people leave, the lights turn off. (delay about 30 seconds) without switch equipment. When the human body leave, it will automatically turn off after the delay(30 seconds), energy-saving and convenience. When person come near the lamp, PIR swith automatically turn on.
When the light is less than 10LUX (dark time), the body movement sensor light will automatically capture the low-frequency signals. It will light when people come and turn off when people leave.
Technical Parameters Sensing modes: high frequent body sensor + light control Delay time: 30 seconds sensing distance: ≦ 8 meters (20 ° ambient temperature) Sensing angle: 140 °. Illuminance sensor is less than 20LUX
Power supply
LED Lamp
HF sensor switch 100-240Vac (: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Emergency Power Solutions Program process
Confirm the emergency mode
Confirm the brightness of the lampin the state of emergency
Confirm the emergency hours
Emergency Mode Mode A: Normal time, lights turn on. Power outage time, the lamp is lit. Mode B: Normal time, lights turn off. Power outage time, the lamp is lit. Emergency Brightness Emergency Brightness, from 20%~100%(30% suggested). Emergency hours Emergency hours from 1 hrs~3 hrs(1hrs suggested).
Circuit Connection Diagram Emergency Brightness 100% 220Vac
Power
LED LAMP 220Vac
Driver inside or constant currence driver lamp must be 100% brightness when emergency hours.
LED Driver
Emergency Brightness20%~99% Driver onside and constant voltage driver lamp can be 20%~99% brightness when emergency hours. 220Vac
Constant Voltage Emergency Power
LED LAMP Constant Voltage
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
High Quality Driver
Input Voltage: 3.75KV Test Seconds: 60s Test Result: Less 20ma
LED Driver 1 2 Output Voltage Input Voltage
Power Factor Character
5KV High Voltage Test Machine
lsolated LED driver
EFFICIENCY vs LOAD(48V Model)
EFFICENCY(%)
PLC-60 series possess superior working efficiency that up to 89 %can be reached in field applications.
Block Diagram
Derating Curve
AMBIENT TEMPERATURE( C)
Static Characteristics
INPUT VOLTAGE(V) 60Hz
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Traic Dimmiable Opintional The dimmiable solution also nee d a controller(CR-DMTR load 150W lamps max) to control dimmiable lamps. If Total lamps power over 150W, it also need a Amplier CR-( AP-TR load 600W lamps max) .
1.Long life,up to 50 ,000+ hours 2.Significantly reduces maintenance costs 3.Low wattage consumption 4.Electricity consumption reduced 80-90%
5.Vibration resistant, solid state electronic circuitry 6.Internal TVS surge protection 7.Low heat generation saves HVAC operating costs
Infrared Remote Control TRIAC Dimmer CR-DMTR
TRIAC Amplier CR-AP-CR
Wiring Diagram AP Amplier
95Vac-140Vac or 185Vac-250Vac
AP Amplier
Controller
10M AP Amplier
AP Amplier
LED LAMP
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Packing information
Label
one pices PRODUCT CCT: 2700K
COLOR: WARM WHITE QUANTITY: 1PCS
QC Mail:
DATE: 2011-01-5
SUPPLYER INFO:
ORDER CODE:1012280101
1012280101
Inside box Maximums five reels
CL-XPL-XXX-XX
Outside box Maximums five boxes XXX
STORAGE CONDITIONS Before opening the package: The LEDs should be kept at 30 C or less and 70%RH or less. The L E D s should be used within a year. When storing the L eds, moisture proof packaging with absorbent material (silica gel) is recommended.
After opening the package: The LEDs should be kept at 30 C or less and 50%RH or less. If unused LEDs remain, they should b e s t o red in moisture proof packages, such as sealed containers with packages of moisture absorbent material (silicagel). It is also recommended to return the LEDs t o t h e original moisture proof bag and to reseal the moisture proof bag again.
SAFETY INFORMATION The components can not be mechanically pressed. Correct electrical polarity needs to be observed. Ensure the power is adapt to operate the total load. Installation must not damage the conducting paths on the circuit board. Parallel connection is highly required as safe electrical operation mode. Pay attention to ESD precautions during assembling. Assembly of LED modules includes power supplier must be appropriately. When installing on metallic or other surface, an electrical isolation point between strip and the installing surface is recommended. Only qualified person allowed to operate installations. Damaged by corrosion will not be materials defect claim. It is the user's responsibility to provide a suitable protection against moisture, condensation and other harmful elements.
(: +86 755 368 63456 7: +86 755 336 86827 *: info@conluxs.com
Enjoy the Light
Marketing Office: Conluxs Lighting Company Ltd/Conluxs Fifth Floor,Building 153,Tongfuyu Industry park, Dalang,Longhua.BaoAn, Shenzhen,China Telephone: General Enquiries: +86-755 368 63456 Email: info@conluxs.com Website: www.conluxs.com Twitter: @conluxs Factory 1: 5~6F, Sanzhong Tailian Industrial park, Qingxi Town, Dongguan City, Guangdong Province, China Factory 2: Building B,Sanlian Industrial Park,Songbai Road, Shiyan Town,Banʼan District,Shenzhen,China Copyright © Conluxs Lighting Company Ltd/Conluxs