Portfolio by Connor Davidge

Connor Davidge Portfolio 2019

Contents Professional Work Deep Dive & Understory Nordstrom Restaurant Design Danielâ&#x20AC;&#x2122;s Broiler Sketches / Process

Student Work Mind the Gap BellahĂ¸j Transit Hub Bar 5 Playground For Culture Omni

deep dive & understory Downtown/Belltown - Seattle, WA Graham Baba Architects

Role: Architectural Staff working with Principal, Project Manager, and (2) Project Architects

Tasks: • • • • • •

LEATHER DETAIL - COLUMN

CONCRETE - RESTROOM FLOOR

BRASS - BAR & TABLE TOPS

WOOD - CASEWORK

LEATHER - BAR FRONT

GLAZED BRICK TILE - RESTROOM

Deep Dive and Understory are two of three publicly accessible spaces at the street-level of the Amazon Spheres. Both projects were fast-paced ventures, advancing from concept design to competed construction documents in less than 6 months, with high levels of coordination required for each project. Understory is a mutli-use event space that can be transformed from it’s exhibit layout to an open-floor event space in less than one day. Deep Dive is a bar providing high-end cocktails and a one-of-a-kind collection curated by local artist Curtis Steiner. Each space came with massive ductwork spanning the ceiling that feeds the plants in the Spheres above. In Deep Dive, the entry was 5’-6” above the floor of the bar, which meant ramps were a required component of the design. Both projects were documented using Revit. Understory began construction in July 2017, and opened with The Spheres on January 29, 2018. Deep Dive opened in August 2018.

• • • • • • •

Design studies Client presentation packages Material review and selection Revit support - DD and CD phases ADA compliance Review and coordination of consultant work (Structural, Mechanical, Electrical, Lighting, AV, Kitchen) Permit correction assistance Health permit documentation and coordination Detail development OAC meetings Mock-up review Revit management - CA phase Construction Administration assistance

Option 1

WOOD - CASEWORK

WOOD - FLOORING

BLACKENED STEEL - TABLE BASE & DOOR FRAMES

GLAZED BRICK - TILE WALL & RESTROOM

LEATHER DETAIL - COLUMN

COPPER - TABLE TOPS

GREEN GRANITE - BAR TOP

LEATHER DETAIL - COLUMN

TABLE BASE & DOOR FRAMES BLACKENED STEEL

CONCRETE - RESTROOM FLOOR

WOOD - CASEWORK

TABLE BASE & DOOR FRAMES BLACKENED STEEL

SEAT BOTTOM - RED LEATHER

SEAT BACK - RED VELVET

METAL SCREEN - GRATE

ZINC - BAR TOP

LEATHER - BAR FRONT

TILE - RESTROOM & TILE WALL

Option 2

Layout 1 - A/A Sequence

Layout 2 - A/B Sequence

Option 3 Layout 3 - Fibonacci Sequence (Selected) LEATHER DETAIL - COLUMN

CONCRETE - RESTROOM FLOOR

BLUE VELVET - SEAT BACK

LEATHER - SEAT BOTTOM & BAR FRONT

BRASS CHAIN - GRATE

Material palette options prepared for client presentation

Back-bar casework layout options METAL

WOOD

METAL

MARBL

BLUE V

BROWN SEAT B

TAPE GWB

MDF-FRAMED FINISH OPENING

TAPE GWB

LINE OF OPENING BELOW

1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

AN GL EV AR IES

Top left: Overall bar, photo by Haris Kenjar

RAILING BELOW

ROUGH OPENING

DASHED LINE OF MILESTONE FINISH, TYP.

Top Right: Curved display wall NOTE: PROVIDE MOCK-UP OF MDF FRAMED FINISH OPENING FOR REVIEW

T Y P IC A L S T O R A G E D IS P L A Y N IC H E SC A LE:

GRIDLINE CX

TAPE

ASI-011GWB

MDF-FRAMED FINISH OPENING

BLOCK 19 R1 R2 620 LENORA ST. SEATTLE, WA 98121

9'-11 3/4"

Project No.

D IS P L A Y

1702

DPD Project No. 6584665

AREA 106A

LINE OF OPENING BELOW

CL 6'-11 1/4"

STO RAG E 106 FIN FLR 93'-0"

ANGLE OF FINISHED OPENING SHOWN AS THIN DASH, TYP.

12 NO.

5'-9 7/8"

4'-2 3/8"

01.19.2018

Scale:

DASHED LINE As indicated OF MILESTONE FINISH, TYP.

R2 - DISPLAY NICHE DETAILS

Sheet:

SC A LE:

1 / 2 " = 1 '- 0 "

1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

RAILING BELOW

SC A L

A9.15

R 2 - F L O O R P L A N - S T O R A G E W A L L N IC H E L A Y O U T

01/19/18 DATE

Date:

Sheet contents:

2'-0 7/8"

NOTE: SEE SEPARATE ART LIGHTING PACKAGE FOR DISPLAY LIGHTING

ASI 011 DESCRIPTION

AN GL EV AR IES

ROUGH OPENING

LINE OF ROUGH OPENINGS SHOWN HEAVY DASH, TYP.

DASHED OF MILE FINISH, T

01.19.2018

YOUT DRAWINGS PROVIDED UT OF ROUGH OPENINGS

NOTE: PROVIDE MOCK-UP OF MDF FRAMED FINISH OPENING FOR REVIEW

T Y P IC A L S T O R A G E D IS P L A Y N IC H E

SC A LE:

DPD Approval Stamp:

6 " = 1 '- 0 "

GRIDLINE SY (20' OFFSET) CEILING STRAPS ABOVE, TYP.

FINISHED OPENING AND CORNER SEAMS SHOWN DASHED,TYP.

GRIDLINE CX

8'-0" CEILING IN3 A9.15 STORAGE ROOM

GRIDLINE SY (OFFSET 20')

ROUGH OPENING SHOWN WITH HEAVY LINE, TYP.

HANDRAIL

01.19.2018

BLOCK 19 R1 R2 620 LENORA ST. SEATTLE, WA 98121

9'-11 3/4"

3 A9.15

ASI-011

Project No.

D IS P L A Y

1702

DPD Project No. 6584665

AREA 106A

LINE OF ROUGH OPENINGS SHOWN HEAVY DASH, TYP.

6'-0" 7'-4 1/2"

ANGLE OF FINISHED OPENING SHOWN AS THIN DASH, TYP.

5'-2"

5'-9"

3'-5"

6'-5"

2'-0"

1'-4"

R2 96'-0"

9'-4 1/2"

14'-10 1/2"

NOTE: SEE SEPARATE ART LIGHTING PACKAGE FOR DISPLAY LIGHTING

1'-4"

LINE OF RAMP

S T O R A G E W A L L N IC H E S - FR2 L A93'-0" TTEN ED

FINISHED OPENINGS: A: W=9", H=1'-4" B: W=1'-6", H=9" C: W=4 7/8", H=3" D: W=6", H=5'-5" E: W=4'-9", H=6"

6'-0" 7'-4 1/2" 9'-4 1/2"

14'-10 1/2"

R A M P 2 - S O U T H - S T O R A G E W A L L N IC H E S - F L A T T E N E D SC A LE:

4'-2 3/8"

1 / 2 " = 1 '- 0 "

ASI 011 DESCRIPTION

Date:

01.19.2018

Scale:

As indicated

R 2 - F L O O R P L A N - S T O R A G E W A L L N IC H E L A Y O U T SC A LE:

1 / 2 " = 1 '- 0 "

01/19/18 DATE

Sheet contents:

2'-0 7/8"

R2 - DISPLAY NICHE DETAILS Sheet:

NOTE: ALL DIMENSIONS ARE REPRESENTATIVE OF ARC LENGTHS ALONG THE FINISH FACE OF THE CURVED STORAGE WALL.

12 NO.

5'-9 7/8"

NOTE: USE (2) LAYOUT DRAWINGS PROVIDED

3'-5" TO VERIFY LAYOUT OF ROUGH OPENINGS

ARC LENGTHS ALONG THE FINISH FACE OF THE CURVED STORAGE WALL.

ROUGH OPENINGS: A: W=1'-9", H=1'-8" B: W=2'-4", H=1'-4" C: W=1'-0", H=9" D: W=1'-2", H=5'-10" E: W=5'-6", H=1'-1"

6'-11 1/4"

STO RAG E 106 FIN FLR 93'-0"

5'-10"

BOTTOM OF OPENING PARALLEL WITH RAILING, TYP.

2'-0"

5'-10"

5'-2"

5'-9"

6'-5"

Below: Plan and elevation layout drawings for curved display wall. Detail for opening at curved wall.

DPD Approval Stamp:

6 " = 1 '- 0 "

GRIDLINE SY (OFFSET 20')

A9.15

LIN OP HE

AN OP AS

NO AR PA DIS

NOTE: USE (2) LAYOUT DRAWINGS PROVIDED TO VERIFY LAYOUT OF ROUGH OPENINGS

108'-8"

SOLID WD4 PANELS ABOVE STEEL CEILING, TYP.

FOR MOST RECENT DESIGN

POS REFERENCE IMAGE #1

R2 B.O. SLAB

108'-8"

ASI-013 XX.XX.XXXX

ART N.I.C.

DUPLEX OUTLET, T-STAT, & FIRE, 48" AFF ON INSIDE FACE OF SIDE PANEL

INTEGRATED A/V SPEAKER, REF A/V - A2 TRACK LIGHT - SEE 17/A9.13

TYP @ NORTH, EAST, SOUTH & WEST FIXED SHELVES

OPENMIRROR BOOKCASE DOORS, - L222 LED EXTRUSION SET BEHIND PANELS PROVIDED BY SEE 7&17/A9.13 C:\Users\connor\Documents\GBA_R1_R2_Central_r17_connor.rvt

OTHERS

AV INPUT IN TOE KICK

POS REFERENCE IMAGE #2

- ADJUSTABLE SHELF

PROVIDE DUPLEX OUTLETS @ (2) LOCATIONS NOTED, - OUTLET ON SHELF VERTICAL REF ELEC

TYP @ NORTH, EAST, SOUTH & WEST FIXED SHELVES

OPEN BOOKCASE DOORS, PANELS PROVIDED BY OTHERS

ADJUSTABLE SHELVES BEHIND WOOD-FRAMED SCREEN PANEL DOOR FOR POS, STEREO EQUIPMENT SLOT DIFFUSER BELOW @ BACKBAR, REF MECH.

R2 94

ASI 011 ASI 008 DESCRIPTION

Date:

XX.XX.XXXX

Scale:

As indicated

94'-0"

1507 Belmont Seattle, Was

ADJUSTABLE SHELVES BEHIND WOOD-FRAMED SCREEN PANEL DOOR FOR POS, STEREO EQUIPMENT

01/19/18 10/27/17 DATE

SLOT DIFFUSER BELOW @ BACKBAR, REF MECH.

R2 94

94'-0"

R2 - INTERIOR B A C K B A R 1 0 4 - P O S S T A T IO N

LIGHTING / POS

SC A LE:

1 " = 1 '- 0 "

Sheet:

A5.17

B A C K B A R 1 0 4 - E A S T C E N T E R - L IG H T IN G & A / V C O O R D IN A T IO N SC A LE:

1702

Sheet contents:

LOCATIONS NOTED, REF ELEC

6" PULL-OUT DRAWER FOR CASH DRAWER

12 8 NO.

A L E : 1 / 2 " = 1 '- 0 " BA C K B A R 1 0S C 4 - P O S S T A T IO N PROVIDE DUPLEX @ (2) 1 2OUTLETS S C A L E : 1 " = 1 '- 0 "

1 / 2 " = 1 '- 0 "

Project No.

1507 Ave, Suite 200 AFF Belmont ON INSIDE POS REFERENCE IMAGE #2 Seattle, 98122 FACE OFWashington SIDE 206.323.9932 PANEL 14 ASI 013 02/13/18

94'-0" ELEVATIONS R2 94 E N T R Y 1 0 1 - N O R T H - L IG H T IN G & A / V C O O R D IN A TBACKBAR IO N

E N T R Y 1 0 1 - N O R T H - L IG H T IN G & A / V C O O R D IN A T IO N SC A LE:

FIXED PANEL

DPD Project No. 6584665

FIXED SHELF

- SPEAKER LOCATION - PROVIDE SPEAKER J-BOX AND OUTLET AT ALL LOCATIONS - REF, 5/A9.13 & 3/AV7.02

620 LENORA ST. SEATTLE, WA 98121

DUPLEX OUTLET, T-STAT, & FIRE, 48"

INTEGRATED A/V SPEAKER, REF A/V

3'-0" ABOVE FIN FLR

- L222 LED EXTRUSION LIGHT - SEE 2/A9.13

6" PULL-OUT DRAWER FOR CASH DRAWER

A/V & LIGHTING COORDINATION LEGEND

19"x11" CUT-OUT IN COUNTER FOR EPOS & RECEIPT PRINTER BELOW, SEE REFERENCE IMAGES

BLOCK 19 R1 R2

ART N.I.C.

DUPLEX OUTLETS IN SIDE OF CASEWORK, TYP.

FIXED PANEL

19"x11" CUT-OUT IN A/V INTEGRATED SPEAKER, TYP, REF A/V COUNTER FOR EPOS & RECEIPT PRINTER BELOW, SEE REFERENCE IMAGES

8 A9.13

ART N.I.C.

1 / 2 " = 1 '- 0 "

8 12

L IB R A R Y 1 0 5 - N O R T H - L IG H T IN G & A / V C O O R D IN A T IO N

SC A LE:

DPD Appro

1 / 2 " = 1 '- 0 "

C O O R D IN A T IO N

DPD Approval Stamp: EXISTING HVAC

EXISTING HVAC

EXISTING CONCRETE COLUMN

HINGED PANEL FOR ACCESS TO LIGHTING DRIVERS, REF ELEC

EXISTING CONCRETE COLUMN

HINGED PANEL FOR ACCESS TO LIGHTING DRIVERS, REF ELEC

AREA FOR MOUNTING LIGHTING DRIVERS, REF ELEC

8 8R1

R2 B.O. SLAB

108'-8"

AREA FOR MOUNTING LIGHTING DRIVERS, REF ELEC

8 8R1

SOLID WD4 PANELS ABOVE STEEL CEILING, TYP.

R2 B.O. SLAB

108'-8" SOLID WD4 PANELS ABOVE STEEL CEILING, TYP.

ASI-013

INTEGRATED A/V SPEAKER, TYP, REF A/V

8 A9.13

BLOC

XX.XX.XXXX DUPLEX OUTLETS IN SIDE OF CASEWORK, TYP.

INTEGRATED A/V SPEAKER, TYP, REF A/V

8 A9.13

BLOCK 19 R1 R2

A/V & LIGHTING COORDINATION LEGEND DUPLEX OUTLETS IN SIDE OF CASEWORK, TYP. - L222 LED EXTRUSION LIGHT - SEE 2/A9.13

Project No

620 LENORA ST. SEATTLE, WA 98121

ART N.I.C.

Project No. - A2 TRACK LIGHT - SEE 17/A9.13

620 LEN SEATTL 98121

ART N.I.C.

DPD Proje

1702 14 12 8 NO.

DPD Project No. 6584665

AV INPUT IN TOE KICK

AS AS AS

- L222 LED EXTRUSION SET BEHIND MIRROR SEE 7&17/A9.13

14 12 8 NO.

- ADJUSTABLE SHELF

- OUTLET ON SHELF VERTICAL

SC A LE:

1 / 2 " = 1 '- 0 "

A5.17

EXISTING CONCRETE COLUMN

SC A LE:

1 1/2"

EDGE OF BOOK SPINE

1/2"

TYPE L222 LINEAR LED EXTRUSION BEHIND VERTICAL WOOD TRIM

ALIGN

1 1/2"

5/8"

BETWEEN ADJACENT FIXTURE LENGTHS

+/- 1-1/2" +/- 1-1/2"

1 1/2"

1 1/2" EDGE OF CASEWORK

1 1/8" TYPE A2 MINIATURE LED ACCENT LIGHT TRACK SURFACE MOUNTED WITHIN ROUTED NICHE, FULL LENGTH OF SHELF. LOW VOLTAGE POWER FEED TO REMOTE POWER SUPPLY AT ONE END

H E L F A1702 T BACK BAR BACK PAN EL ProjectSGENERAL No. NOTES:

SC 1.A L E :

6 " REFERENCE = 1 '- 0 "

1/A5.17 FOR LIGHTING COORDINATION PANEL OPTIONS CAN BE PLACED ON EITHER EAST OR WEST FACE OF BACK BAR WALL

TYPE L222 LINEAR LED EXTRUSION BEHIND MIRROR

ANTIQUE MIRROR PANEL

CASEWORK

1 1/2"

TYPE L222 LINEAR LED EXTRUSION BEHIND MIRROR

CASEWORK

TYPE A2 MINIATURE LED ACCENT LIGHT TRACK 620 LENORA ST. SEATTLE, WA 98121

ANTIQUE MIRROR PANEL

OPTION B:

WOOD PANEL EDGESOLID OF CASEWORK

SURFACE MOUNTED WITHIN ROUTED NICHE, GENERAL NOTES: FULLFOR LENGTH OF SHELF. LOW VOLTAGE POWER 1. REFERENCE 1/A5.17 LIGHTING COORDINATION TO REMOTE POWER SUPPLY AT ONE END 2. PANEL OPTIONSFEED CAN BE PLACED ON EITHER EAST OR WEST FACE OF BACK BAR WALL

LOW VOLTAGE JUMPER BETWEEN ADJACENT SEGMENTS

SH ELF A T SC A LE:

3 " = 1 '- 0 "

1 1/2"

LOW VOLTAGE JUMPER XX.XX.XXXX

5/8"

C:\Users\connor\Documents\GBA_R1_R2_Central_r17_connor.rvt

1 2 " = 1 '- 0 "

2" 3/8" STEEL PLATE

OPTION B: SOLID WOOD PANEL

BLOCK 19 R1 R2

ANTIQUED BRASS PIPE

B A C K B A R V E R T IC A L T R IM D E T A IL SC A LE:

ASI-013 1 1/8"

C:\Users\connor\Documents\GBA_R1_R2_Central_r17_connor.rvt

CONTINUOUS

LOW VOLTAGE JUMPER VERTICAL WOOD TRIM, REFADJACENT 2/A9.13 BETWEEN FIXTURE LENGTHS

1 7/8"

1 1/4"

SC A L

LOW VOLTAGE JUMPER BETWEEN ADJACENT SEGMENTS

1/2"

3/8"

3.00Â° TYP

3 " = 1 '- 0 "

1/2" 1 1/2"

7/8" MIN.

CONTINUOUS NICHE ROUTED IN VERTICAL WOOD TRIM TO CONCEAL WIRING, TYP.

E.O.

SECTION

TYPE L222 LINEAR LED EXTRUSION BEHIND VERTICAL WOOD TRIM

MTL COVE RADIUS OR SEGMENTED, FOLLOWS PANELS

B A N Q U E T T E B A C K P A N E L / R A IL IN G SC A LE:

1 1/2"

TYPE L222 LINEAR LED EXTRUCTION BEHIND MIRROR LOW VOLTAGE JUMPER BETWEEN ADJACENT SEGMENTS AT CORNERS TO BE CONCEALED FROM VIEW

CONTINUOUS VERTICAL WOOD TRIM, REF 2/A9.13

3/8"

1/4" TYP. CONTINUOUS VERTICAL WOOD TRIM

LIGHT COVE BASE, REF LIGHTING DRAWINGS

1/8"

1/4" TYP.

ANGLED LOUDSPEAKER ISOLATION PAD, REF A/V

3 " = 1 '- 0 "

Right - Casework details for back-bar S H E L F A and T B A C Klibrary B A R - S P E casework A K E R M O U N T IN G

SC A LE:

TYPE L222 LINEAR LED EXTRUCTION BEHIND MIRROR LOW VOLTAGE JUMPER BETWEEN ADJACENT SEGMENTS AT CORNERS TO BE CONCEALED FROM VIEW

3 " = 1 '- 0 "

STANDOFF

Above - Finished Library room, photo by Haris Kenjar

HANDRAIL BRACKET

3/8"

OPTION A: ANTIQUE MIRROR PANEL

DPD Approval Stamp:

EDGE OF SHELF BLACK ACOUSTICALLY TRANSPARENT CLOTH STRETCHED OVER FRAME; FRICTION FIT OR MAGNETS REF A5.17 FOR LOCATIONS

16GA BENT B A N Q U E T T E B MTL A CPLATE K P A N E L / R A IL IN G

HANDRAIL ABOVE, DASHED

BA C K BA R CA SEW O RK AT C O LU M N

S RIE VA

LED LIGHT

DIM PT EDGE OF RAMP LAYOUT CIRCLE

ALIGN

3 " = 1 '- 0 "

WOOD E.O. PANELS

SECTION

3/4"

SC A LE:

MTL COVE RADIUS OR SEGMENTED, FOLLOWS PANELS

ACTUAL EDGE OF RAMP

3 " = 1 '- 0 "

SPEAKER, REF A/V

ANTIQUE

OR SHIMS BRACKET AS REQ'D HANDRAIL

3/8"

R A M P B A C K B A R R E L A T IO N S H IP

LED LIGHT 16GA BENT MTL PLATE LIGHT COVE BASE, REF LIGHTING DRAWINGS

DIM PT EDGE OF RAMP LAYOUT CIRCLE

ALIGN

HANDRAIL ABOVE, FINISH WOOD DASHED PANEL ON FURRING

3/8"

SCRIBE COUNTER TO COLUMN, SCRIBE PANEL INFIL BELOW

S RIE VA

ACOUSTICAL INSULATION, REF AV

SC A LE:

LAYOUT LINES, SEE RAMP LAYOUT DRAWING

OPTION A: ANTIQUE MIRROR PANEL

FURRING AS REQUIRED 3/4"

1/2" PNL

3/8"

WOOD PANELS

ACTUAL EDGE OF RAMP

R A M P B A C K B A R R E L A T IO N S H IP

TYPE L222 LINEAR LED EXTRUSION SURFACE MOUNTED VIA MOUNTING BRACKET

3/4"

RAMP EDGE

SC A LE:

3/8"

CASEWORK SPRINGPOINT

ALIGN

2" TO

EDGE

2" 1" 2" TO

1/2" 1/2"

2'-4" F.O COUNTER

1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932 LAYOUT

WOOD PANELS CURVED AT BANQUETTE TO FOLLOW LAYOUT LINE, SEGMENTED AT BACKBAR TANGENT TO LAYOUT LINE AT STANCHIONS

3/8"

FACE OF COUNTER ABOVE

JOINT FOR MIN. PRACTICAL PROPERLY DOORS TO OPEN

RAMP EDGE

DIM PT

3 " = 1 '- 0 "

3/8"

1 1/2"

H A N D R A IL S T A N C H IO N P A N E L IN T E R F A C E SC A LE:

1 1/2"

HANDRAIL BRACKET

CASEWORK SPRINGPOINT FROM LAYOUT ARC, REF LAYOUT PLAN

LAYOUT LINES, SEE RAMP LAYOUT DRAWING

CASEWORK SIDE PANEL, TYP.

3/8"

LINE, SEGMENTED AT BACKBAR TANGENT TO LAYOUT LINE AT STANCHIONS 8

FACE OF COUNTER HANDRAIL ABOVE, ABOVE DASHED

1/2"

E.O.

P A N E L / R A IL IN G

LOW VOLTAGE JUMPER BETWEEN ADJACENT SEGMENTS

1/2"

WOOD PANELS STEEL HANDRAIL CURVED AT BRACKET, 8 BANQUETTE TO ATTACHED TO FOLLOW LAYOUT CASEWORK

DIM PT EDGE OF RAMP LAYOUT ARC

ALIGN

LAYOUT LINES, SEE LAYOUT PLAN

PNL

OR SHIMS AS REQ'D

LAYOUT DIM PT

MTL COVE RADIUS OR SEGMENTED, FOLLOWS PANELS

SECTION

HANDRAIL PANEL ON BRACKET FURRING

JOINT FOR MIN. PRACTICAL PROPERLY DOORS TO OPEN

STEEL PIPE HANDRAIL 8

FINISH WOOD

3/8"

3 " = 1 '- 0 "

REVEAL AROUND PANELS, TYP

FROM WOOD LAYOUT ARC, REF FINISH LAYOUT PLAN PANEL ON FURRING OR SHIMS AS REQ'D

VERTICAL WOOD TRIM

LED LIGHT

BENT PLATE T COVE , REF TING WINGS

SC A LE:

DIM PT EDGEBACK OF BANQUETTE RAMP LAYOUT ARC

ACTUAL EDGE OF RAMP

LAYOUT LINES, SEE LAYOUT PLAN

2'-4" F.O COUNTER

STEEL PLATE CUT TO SHAPE AND BENT TO LOCATE RAIL AS SHOWN. 8 RAIL MECHANICALLY FASTENED TO BRACKET. FINISH BACKET: PER ARCHITECT SAMPLE FINISH RAIL: PETINA'D PER ARCHITECT SAMPLE

OF RAMP

HANDRAIL ABOVE, DASHED

3/8" X 4" STEEL PL STANCHION

HANDRAIL BRACKET

DIM PT

STEEL PIPE HANDRAIL STL PLATE TOP CAP STEEL HANDRAIL (BECOMES BRACKET, SHELF AT ATTACHED TO BACKBAR) CASEWORK

T.O UPHOLSTERED

ALIGN

3/8" X 4" STEEL PL STANCHION

8R1 8

3 " = 1LAYOUT '- 0 "

REVEAL AROUND PANELS, TYP

B.O. UPHOLSTERED BANQUETTE BACK ACTUAL EDGE

R A M P B A N Q U E T T E B A C K R E L A T IO N S H IP

L222 LED STRIP LIGHT, REF CASEWORK LIGHTING SCHEDULE

HANDRAIL ABOVE F.O. WALL & BRACKET

ALIGN

SC A LE:

WOOD BLOCKING PAINTED BLACK

PLAN

WOOD PANELS

R A M P B A N Q U E T T E B A C K R E L A T IO N S H IP

DIA

EDGE OF STEEL PLATE CAP, DASHED

T.O UPHOLSTERED BANQUETTE BACK

FINISH WOOD PANEL ON FURRING OR SHIMS AS REQ'D

LAYOUT LINES, SEE RAMP LAYOUT DRAWING

STRUCT

CLR

STRUCT

4" 2" 2"

VFY BEND RADIUS TO LOCATE RAIL AS SHOWN

1 5/8" 1 1/2"

WOOD PANELS CURVED AT BANQUETTE TO FOLLOW LAYOUT LINE, SEGMENTED AT BACKBAR TANGENT TO LAYOUT LINE AT STANCHIONS

EDGE OF STEEL PLATE CAP, DASHED PNL

STL PLATE TOP CAP (BECOMES SHELF AT BACKBAR)

B.O. UPHOLSTERED BANQUETTE BACK

3/8" X 4" STEEL PL STANCHION

ELEV.

" 1/2

1 3/4"

LAYOUT LINES, SEE RAMP LAYOUT DRAWING

8 12

3/8" X 4" STEEL PL STANCHION

PNL

SEQUENCE - AT BANQUETTE & BACK BAR: 1. CONCRETE RAMP FORMED 2. STEEL STANCHIONS ATTACHED LAYOUT 3. CASEWORK BOXES PTPANELS 4. FINISHDIM BACK ATTACHED

WOOD TRIM, TO MATCH CASEWORK

SEQUENCE - AT BANQUETTE & BACK BAR: 1. CONCRETE RAMP FORMED 2. STEEL STANCHIONS ATTACHED 3. CASEWORK BOXES 4. FINISH BACK PANELS ATTACHED

EDGE OF RAMP

Finished backbar, photo by Haris Kenjar

STEEL PIPE HANDRAIL

STEEL HANDRAIL BRACKET, ATTACHED TO CASEWORK

Sheet:

RAIL

REVEAL AROUND PANELS, TYP

R2 ELEV BAC LIGH

94'-0"

R2 - INTERIOR ELEVATIONS BACKBAR LIGHTING / POS

1 / 2 " = 1 '- 0 "

STL PLATE TOP CAP (BECOMES SHELF AT BACKBAR)

As indicated

Sheet cont

R2 94

EDGE

SC A LE:

Scale:

Sheet contents:

B A C K B A R 1 0 4 - E A S T C E N T E R - L IG H T IN G & A / V C O O R D IN A T IO N

XX.XX.XXXX

94'-0"

Casework fixture and equipment coordination drawings

02/13/18 01/19/18 10/27/17 DATE

Date:

B A C K B A R 1 0 4 - E A S T C E N T E R - L IG H T IN G & A / V C O O R D INR2A94T IO N

ASI 013 ASI 011 ASI 008 DESCRIPTION

FURRING AS REQUIRED 3/4"

- SPEAKER LOCATION - PROVIDE SPEAKER J-BOX AND OUTLET AT ALL LOCATIONS - REF, 5/A9.13 & 3/AV7.02

3'-0" ABOVE FIN FLR

C:\Users\connor\Documents\GBA_R1_R2_Central_r17_connor.rvt

AV INPUT IN TOE KICK

3'-0" ABOVE FIN FLR

Date:

SC A LE:

3 " = 1 '- 0 "

3/8" STEEL PLATE

REVEAL, TYP. 12

CASEWORK, BACKS

REVEAL, TYP.

CASEWORK, BACKSPLASH

S H E L F A T B A C K P A N E L - M IR R O R P A N E L

S H E L3/8" F STEEL AT B AC PLATE

SC A LE:

6 " = 1 '- 0 "

DPD Project No. 6584665 12 8

SH ELF A T BA CK BA R BA C K PA N EL SC A LE:

6 " = 1 '- 0 "

S H E L F A T B A C K P A N E L - M IR R O R P A N E L SC A LE:

6 " = 1 '- 0 "

SC A L

2 ASK-016 H IDT RW EA CL AIR IN ST "M ND 3'-0 EYO B

(N) OUTL TOP SHO GREY FIL (E) LINE OF STAIR SHOWN AS RED DASH

A RE RA EA IR CL TA IN DS "M 3'-0 EYON B

(N) OUTLINE OF BAR TOP SHOWN AS GREY FILL BAR SUBTOP SHOWN AS BLUE DASH

ADA CLEAR FLOOR SPACE

F.O. DIE WALL

(N) LINE OF CONCRETE CURB SHOWN AS BLUE DASH

BEYOND STAIR

3'-0" MIN. CLEAR AREA

2'-6 3/4"

BAR SUB SHOWN DASH

(N) LINE OF CONCRETE CURB SHOWN AS BLUE DASH

RADIUS A RADIUS B RADIUS C RADIUS D

*NOTE* UPPER BAR & CONCRETE CURB OFFSET 4" EAST

F.O. DIE WALL

3'-0" (NOT AN EXIT ACCESS)

(E) LINE O CURB @ AS RED D

BAR SUBTOP SHOWN AS BLUE DASH

(E) LINE OF CONCRETE CURB @ BAR SHOWN AS RED DASH

BEYOND STAIR

(N) OUTLINE OF BAR TOP SHOWN AS GREY FILL

(N) LINE OF STAIR

A RE RA EA IR CL TA IN DS "M 3'-0 EYON B

(E) LINE OF BAR TOP SHOWN RED

3'-0" MIN. CLEAR AREA

(E) LINE OF CONCRETE CURB @ BAR SHOWN AS RED DASH

(N) RAILINGS, 12" EXTENSION BEYOND TREAD

R2 BAR & STAIR - BAR DETAILS

SCALE:

1 / 2 " = 1 '- 0 "

2 ASK-016 (E) LINE OF CONCRETE CURB @ BAR SHOWN AS RED DASH

128.17°

(E) LINE OF CONCRETE CURB @ BAR SHOWN AS RED DASH

*NOTE* UPPER BAR & CONCRETE CURB OFFSET 4" EAST

(N) OUTLINE OF BAR TOP SHOWN AS GREY FILL ADA CLEAR FLOOR SPACE

(N) LINE OF CONCRETE CURB SHOWN AS BLUE DASH

THIS SIDE OF THE BAR IS UNCHANGED

R2 BAR & STAIR - OVERALL

1 / 2 " = 1 '- 0 "

R2 BAR & STAIR - BAR DETAILS SCALE:

1 / 2 " = 1 '- 0 "

BLOCK 19 R1 R2 2101 7TH AVENUE SEATTLE, WA 98121

1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

1/4"

R2 BAR & STAIR - BAR DIMENSIONS SCALE:

1 " = 1 '- 0 "

Issued with: 11/15/17

Date: Modifies:

Sketch No.:

ASK-014

Top left - Plan drawing of bar casework and employee stair summarizing adjusted location of bar casework for ADA clearance and stair ASK-016 location for landing clearances. BLOCK 19 R1 R2

1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

(N) LINE OF STAIR

1'-11 1/8"

2101 7TH AVENUE SEATTLE, WA 98121

Project No.

Date:

11/15/17

Sketch No.:

Modifies:

As indicated

30.71°

" 1'-0

Top & middle right - Plan and detail plan noting bar casework adjustment, and detail dimensions of bar top.

(E) LINE OF STAIR AS POURED

Bottom left - Plan drawing detailing adjusted stair location in relation to project grid lines.

(E) LINE OF CONCRETE CURB SHOWN AS RED DASH (N) LINE OF CONCRETE CURB SHOWN AS BLUE DASH

GRIDLINE SY (OFFSET 20') GRIDLINE CX

*NOTE* UPPER BAR & CONCRETE CURB OFFSET 4" EAST

R2 BAR & STAIR - STAIR DETAILS 1 / 2 " = 1 '- 0 "

BLOCK 19 R1 R2 1507 Belmont Ave, Suite 200

1702

Issued with:

Scale:

" 3'-0

SCALE:

1702

Project No.

= 1'-0" Scale: 12"1/2" (N) RAILINGS, EXTENSION BEYOND TREAD

40.57° ARC LENG TH: 1' -3

RADIUS A= 11 1/2" RADIUS B= 1'-0 1/2" RADIUS C= 1'-2" RADIUS D= 1'-9 1/2"

19'-2 7/8"

SCALE:

1° 112.9 3/4" : 2'-0 ARC

F.O. DIE WALL

*NOTE* UPPER BAR & CONCRETE CURB OFFSET 4" EAST

BAR SUBTOP SHOWN AS BLUE DASH

3/4"

/4" 91

BAR SUBTOP SHOWN AS BLUE DASH

ARC LENGTH: 2'-1

67.96° ARC LENGTH: 1'-4 5/8"

(N) OUTLINE OF BAR TOP SHOWN AS GREY FILL

2101 7TH AVENUE

Project No.

Issued with:

1702

Nordstrom restaurant DEsign Natick, MA & San Antonio, TX Graham Baba Architects

As Nordstrom is renovating retail locations across the country, the in-store cafe and restaurants are receiving much needed updates as well. In the Natick, Massachusetts (near Boston), and San Antonio, Texas locations, the client asked to leave most of the existing infrastructure in place, but give the space a refresh. In Natick, existing mahogany paneling dominated the space, and were to be retained at the clients request. Through various iterations, the design landed on an aesthetic that brought lighter tones into the once dark space. Mahogany panels will be sanded and stained, new fixtures and custom furniture will bring modern touches, and casework detailing that reflects retained elements will harmonize new and old. Upon completion, these renovations will more accurately reflect Nordstrom’s current design values and serve as a precedent for other restaurant refreshes moving forward.

Role: Architectural Staff working with Project Manager, and Project Architects

Tasks:

DEMOLITION GENERAL NOTES 1 2 3

4 5 6 7 8

9 10 11





• • • • • • • • • •

PROTECT FINISHES ON EXISTING SURFACES TO REMAIN. PROTECT EXISTING FLOOR SLABS DURING CONSTRUCTION. NO STRUCTURAL MEMBERS TO BE REMOVED OR COMPROMISED UNLESS INDICATED FOR REMOVAL ON THE STRUCTURAL DRAWINGS, CONTRACTOR SHALL NOTIFY THE ARCHITECT IF A STRUCTURAL ASSEMBLY IS ENCOUNTERED DURING DEMOLITION PRIOR TO REMOVAL. RECYCLE AND SALVAGE EXISTING MATERIALS TO THE GREATEST EXTENT POSSIBLE. REMOVE ALL LOOSE LYING WOOD, METAL, CONCRETE, AND MISCELLANEOUS DEBRIS FROM THE PREMISES. ASBESTOS AND ANY HAZARDOUS MATERIAL SHALL BE REMOVED AND DISPOSED OF ACCORDING TO APPLICABLE JURISDICTIONAL REQUIREMENTS ANY MATERIALS REMOVED MUST BE DISMANTLED BACK TO POINT OF ORIGIN. ANY EXISTING MATERIALS / EQUIPMENT NOT BEING REUSED SHALL BE COMPLETELY REMOVED AND DISPOSED OF PROPERLY ACCORDING TO APPLICABLE JURISDICTIONAL REQUIREMENTS. VERIFY WITH ARCHITECT FOR ITEMS TO BE RELOCATED OR REINSTALLED. DEMOLITION DRAWINGS DO NOT SHOW REMOVAL OF SLAB REQUIRED FOR INSTALLATION OF SUB-SLAB UTILITIES. PRIOR TO THE BEGINNING OF ANY DEMOLITION ACTIVITIES, THE CONTRACTOR SHALL CONDUCT A MEETING AND SITE WALK-THROUGH TO REVIEW DEMOLITION PROCEDURES AND CONSTRUCTION WASTE MANAGEMENT PLANS, AND TO VERIFY MATERIALS SLATED FOR REMOVAL AND SALVAGE. ATTENDANCE SHALL AT A MINIMUM BE BY THE CONTRACTOR, DEMOLITION SUB-CONTRACTOR, ARCHITECT, AND OWNER.

Revit Modeling Restaurant layout options Material studies, review, and selection Design studies Sketchup Modeling Presentation renderings FF&E selections Detail Development Construction Documents Construction Administration assistance

DEMOLITION GENERAL NOTES 1 2 3

4 5 6 7 8

9 10 11

1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932 12

ALL FIRE RATED WALLS SHALL REMAIN AT PRE-CONSTRUCTION FIRE RATING. 





1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

ALL FIRE RATED WALLS SHALL REMAIN AT PRE-CONSTRUCTION FIRE RATING.



 30' - 0"

30' - 0"



Partial-height wall between store & restaurant

 

 

40' - 0"

 

 

  

 

Date

  

 

Revision Type

Approval Stamp:

40' - 0"

QUANTITY

Bar 6' - 0"

8' - 11" COUNTERTOP

TOTAL

133

2' - 6"

(N) SERVICE BAR

2' - 6" 3' - 6" CO2 Tank

evap. air in exhaust air out

(E) FLOOR SINK

The Shops at La Cantera (732) 15900 La Cantera Parkway Building #13Floor Plan 1 SCALE: San Antonio, Texas 78256 1/4" = 1'-0"

(N) SPARKLING WATER

NEW REFRIGERATION

(N) FLOOR SINK

(N) SINGLE-HEAD ESPRESSO MACHINE (N) GRINDER

6 7 8

9 10 11

(N) KNOCK BOX





125

Date:

xx,xx,xxxx

Scale:

1/4" = 1'-0"

1819 - Nordstrom 531 Natick - Cafe Bistro

Project No.

1821

Date:

xx,xx,xxxx

Scale:

1/4" = 1'-0"

Sheet contents:

Floor Plan 1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

Sheet:

  

 

 

SEAT TYPE Sheet:

Booth Banquette

A2.01

Floor Plan SCALE: 1/4" = 1'-0"

Above right -1Restaurant layout options FLOOR PLAN&- OPTION

6' - 0"

38 42

Bar

TOTAL

126

PERMIT xx,xx,xxxx

La Cantera Cafe Bistro The Shops at La Cantera (732) 15900 La Cantera Parkway Building #13 San Antonio, Texas 78256

Project No.

1821

Date:

xx,xx,xxxx

Scale:

1/4" = 1'-0"



evap. air in

CO2 Tank

RELOCATED POS

bladder tank

exhaust air out

2' - 6"

Revision Type

Flexible

2' - 6" 3' - 6"

for client review

Date

QUANTITY

8' - 11" COUNTERTOP

(N) SERVICE BAR

1/8” = 1’-0”

Rev. #

Approval Stamp:

(N) HOST STAND

40' - 0"

(N) SINGLE-HEAD ESPRESSO MACHINE (N) GRINDER

(N) FLOOR SINK

Partial-height wall between store & restaurant

  

 

3' - 6"

exhaust air out bladder tank

08/17/2018 Floor Plan

 

NEW REFRIGERATION

xx,xx,xxxx

1/8” = 1’-0”

 

CO2 Tank



(N) SPARKLING WATER

30' - 0"

FLOOR PLAN - OPTION 3

RELOCATED POS

evap. air in

30' - 0"

PERMIT

La Cantera Cafe Bistro The Shops at La Cantera (732) 15900 La Cantera Parkway Building #13 San Antonio, Texas 78256

A2.01 TEST





1821

Sheet contents:

(N) KNOCK BOX

4 5

 

Project No.



(E) FLOOR SINK

TOTAL

1 2 3

RELOCATED POS

xx,xx,xxxx

La Cantera Cafe Bistro

 

2' - 6"

PERMIT

bladder tank

Bar DEMOLITION GENERAL NOTES

(N) SERVICE BAR

2' - 6"

Flexible

8' - 11" COUNTERTOP

Banquette

6' - 0"

Booth

Revision Type

QUANTITY

Booth

  

 

 

 

Rev. #

(N) HOST STAND

Date

Approval Stamp:

SEAT TYPE

Rev. #

(N) HOST STAND

 

 

 

 

  

 

Partial-height wall between store & restaurant

 

30' - 0"

 

30' - 0"

 Sheet contents:

08/17/2018

1819 - Nordstrom 531 Natick - Cafe Bistro

(E) FLOOR SINK

(N) SPARKLING WATER

NEW REFRIGERATION

(N) FLOOR SINK

(N) SINGLE-HEAD ESPRESSO MACHINE (N) GRINDER

(N) KNOCK BOX

Floor Plan

Sheet:

Below - Elevation sketch studies for metal guardrail divider

Option 1

Option 3

A2.01 TEST

Floor Plan SCALE: 1/4" = 1'-0"

FLOOR PLAN - OPTION 2 1/8” = 1’-0” 08/17/2018

Option 2 (Selected)

Option 4

1819 - Nordstrom 531 Natick - Cafe Bistro

CPT-1 Bentley Carpet: Impasto - Portrait

WD-1 Wood Veneer: Oak

STN-1 Caesarstone Booth Table Tops: Dreamy Marfil

CH-1 Kristalia Sharky Alu Counter Stool: Dusty Red

VYL-2 Ultrafabrics: Brisa Distressed Shield TB-1 Custom Powder Coat Table: Match to Chair Color

CH-2 Bacco Chairs Colored Leather

Top left - Rendered floor plan with material and FF&E references

T-1 LAB Matte Tiles: Grey

MTL- 1 Countertop: Stainless Steel

ET-1 Existing Tile

Retain (E) Mahogany Panels

FINISH FLOOR PLAN - RENDER

MTL-2 Grey Powder Coat

MESH-2 Metal Mesh

Middle - Rendered elevations with material and FF&E references

09/20/2018

Bottom - Render of restaurant view from retail store

1819 - Nordstrom 531 Natick - Bazille

1/8” = 1’-0”

MTL-2 Grey Powder Coat

PLAM-1 Wilsonart: Matte Pewter

VYL-1 Architex: Ryder Doe at Perimeter

MESH-2 Metal Mesh

VYL-1 Architex: Ryder Doe at Perimeter

WD-1 Wood Veneer: Oak Table Tops

Retain (E) Mahogany Panels

WM-3 Crane Light

Retain (E) Mahogany Panels

WM-3 Crane Light WD-1 Wood Veneer: Oak Table Tops

WD-1 Wood Veneer: Oak Table Tops

WM-3 Crane Light Wall Mount

P-3 Pendant Flowerpot

WM-2 Orbit Sconce

PLAM-1 Wilsonart: Matte Pewter Table Tops

CH-2 Bacco Chairs Colored Leather

PLAM-1 Wilsonart: Matte T-1 LAB Tile Base Pewter Table Tops

VYL-1 Architex: Ryder Doe at Perimeter

Retain (E) Mahogany Panels

CH-2 Bacco Chairs Colored Leather

VYL-1 Architex: Ryder Doe at Perimeter

Retain ( Panels

T-1 LAB Tile Base NORTH ELEVATION 1/4” = 1’-0”

NORTH ELEVATION 1/4” = 1’-0”

09/24/2018

1819 - Nordstrom 531 Natick - Bazille

09/24/2018 EAST ELEVATION 1819 - Nordstrom 531 Natick - Bazille 1/4” = 1’-0”

EAST ELEVATION 1/4” = 1’-0”

09/24/2018

1819 - Nordstrom 531 Natick - Bazille

1819 - Nordstrom 531 Nat

PLAM-2 SIDE PANEL

1" MTL-1 OVER

EQ.

3'-4"

EDGES

EQ.

FASTEN PANEL TO SUBSTRATE W/ PREDRILLED, COUNTERSUNK SQUARE DRIVE METAL FASTENERS, FINISH TO MATCH MTL-1, TYP.

1 1/4" TYP.

RB-1 BASE

Rev. #

Host Station - East Elevation

Date

Revision Type

Host Station - Section 2

Approval Stamp:

SCALE: 1 1/2" = 1'-0"

SCALE: 1 1/2" = 1'-0" 5 A7.01

6 A7.01

1 1/4" TYP.

14 GA STEEL CAP

SEAMLESS JOINT @ CORNERS,TYP

5 A7.01

EDGE OF COUNTERTOP BEYOND PLAM ON 3/4" PLYWOOD FASTEN PANEL TO SUBSTRATE W/ PREDRILLED, COUNTERSUNK SQUARE DRIVE METAL FASTENERS, FINISH TO MATCH MTL-1, TYP.; ALIGN METAL FASTNERS

BENT MTL-1 EDGE; EASE EDGES 3 1/2"

Natick Mall (531) 290 Speen Street Natick, Massachusetts 01760

1819

Date:

1 1/4" TYP. November 16, 2018 EXTENT OF CABINET EDGE OF WALL BEHIND MTL-1 PANEL BEYOND

MTL-1 16 GA PANEL, EASE EDGES

2'-0"

PLAM-3 TOP

Sheet contents:

3/4" 6 1/2"

PLAM-2 OPEN SHELF

3/4"

MTL-1, 16 GA, EASE EDGES

A7.01 OUTLET; COVER PLATE BLACK; 30" AFF

Sheet:

A7.01

1'-11 1/4" 3'-10"

Host Station - Enlarged Plan 1 SCALE: 1 1/2" = 1'-0" 3/4" PLYWOOD CABINET 3'-0"

1'-11 1/4"

CONSTRUCTION, TYP.

1507 Belmont Ave, Su Seattle, Washington 206.32

COUNTERTOP BEYOND

Host Station - North Elevation

3 3'-4"

H FLOOR

1 1/4" TYP.

EQ.

Casework - Host Station

3'-0" COUNTERTOP

EQ.

1/4" TYP. REVEAL

Scale:

EQ.

IPAD W/ OPENTABLE, FOIC

1 1/4" TYP.

7 A7.01

MTL-1 16 GA PANEL, EASE EDGES

Project No.

1 1/4" TYP.

PLAM-3 COUNTERTOP

SCALE: 6" = 1'-0"

C:\Users\Liz\Documents\1819 Natick Cafe Bistro-Central_2_r19_liz.rvt

SIM

2'-0"

Host Desk - Metal Panel Detail

2'-0" COUNTERTOP

3 1/2"

GROMMET W/ BLACK FLANGE

18 GA STEEL PANEL

1 1/4"

Natick Cafe Bistro

EQ.

MTL-1 16 GA PANEL; EASE EDGES

SCALE: 1 1/2" = 1'-0" EQ.

A7.01

EQ.

STEEL PANEL BEYOND

November 16, 2018

6 A7.01

EQ.

1 1/4" TYP.

100% CONSTRUCTION DOCUMENTS

FASTEN PANEL TO SUBSTRATE W/ PREDRILLED, COUNTERSUNK SQUARE DRIVE METAL FASTENERS, FINISH TO MATCH MTL-1, TYP.

ADJUSTABLE PLAM-2 SHELF

1 1/4" TYP.

1/4" TYP. REVEAL

RB-1 BASE

1 1/4" TYP.

EQ.

PLAM-2 CABINET BOX

Host Station - Section 1

SCALE: 1 1/2" = 1'-0"

Rev. #

Date

Approval Stamp:

Host Station - East Elevation SCALE: 1 1/2" = 1'-0"

5 A7.01

6 A7.01 3'-0" COUNTERTOP 1 1/4" TYP.

EQ.

MTL-1 16GA PANEL, EASE EDGES PLAM-3 COUNTERTOP & SIDE PANEL

10 CONSTR DOCUM

MTL-1 16GA PANEL BEYOND, EASE EDGES

7 A7.01

PLAM-3 TOP 10"

MTL-1 16 GA PANEL, EASE EDGES

6 A7.01

Novembe

5 A7.01

A7.01

Natick Caf

PLAM-3 TOP DRAWER PULL; HAFELE 124.02.320 (23/4") PULL; BLACK PLAM-2 DRAWER INTERIOR

OUTLET; COVER PLATE BLACK; 30" AFF 3 1/2"

ADJUSTABLE PLAM-2 SHELF

GROMMET W/ BLACK FLANGE

ABS EDGE TO MATCH PLAM-2 @ ALL EXPOSED PLAM EDGE, TYP.

Natick Mall (53 290 Speen Stre Natick, Massac

1'-11 1/4"

3/4" PLYWOOD CABINET CONSTRUCTION, TYP. 3'-0"

MTL-1 16GA PANEL, EASE EDGES PLAM-2 CABINET INTERIOR

MTL-1, 16 GA, EASE EDGES

SIM

PLAM-2 SIDE PANEL

OPEN

3/4"

ADJUSTABLE PLAM-2 SHELF

PLAM-3 COUNTERTOP

PLAM-2 CABINET BOX

IPAD W/ OPENTABLE, FOIC

2'-0" COUNTERTOP

SIM

PLAM-2 OPEN SHELF

3'-10"

18 A9.01

1" MTL-1 PANEL OVERHANG

EDGE OF METAL PANEL BEYOND

18 A9.01

1'-11 1/4"

OUTLET BEYOND PLAM-2 DRAWER

3 1/2"

6 1/2"

OPEN

OUTLET BACK; 30" AFF

BENT MTL-1 EDGE; EASE EDGES

3/4" 6 1/2"

MTL-1 PANEL, 16 GA, EASE EDGES

3'-0"

Project No.

Date:

Scale: Sheet contents:

RB-1 BASE

3'-0" COUNTERTOP

RB-1 BASE

FINISH FLOOR

RB-1 BASE

1/4" TYP. REVEAL

Host Station - Section 2 6 SCALE: 1 1/2" = 1'-0" Host Station - South Elevation Custom desk construction drawings 2 SCALE: host 1 1/2" = 1'-0"

Casework Station

1/4" TYP. REVEAL

EDGE OF ENTRY POTAL

Sheet: A7.01

and details

5 A7.01

6 A7.01

Host Station - Section 1 5 SCALE: 1 1/2" = 1'-0" Host Station - Enlarged Plan SCALE: 1 1/2" = 1'-0"

A7.0

5 A7.01

6 A7.01 3'-0" COUNTERTOP

1 1/4" TYP.

EDGE OF COUNTERTOP BEYOND

FASTEN PANEL TO SUBSTRATE W/ PRE-

EQ.

EQ. 1'-1 1/2"

EQ.

MTL-1 16GA PANEL, EASE EDGES PLAM-3 COUNTERTOP & SIDE PANEL

FASTEN PANEL TO SUBSTRATE W/ PRE-DRILLED, COUNTERSUNK SQUARE DRIVE METAL FASTENERS, FINISH TO MATCH MTL-1, TYP.

7 A7.01

10"

1 1/4" TYP.

EQ.

1 1/4" TYP.

DRAWER PULL; HAFELE 124.02.320 (2-3/4") PULL; BLACK

7 A7.01

MTL-1 16 GA PANEL, EASE EDGES

2'-4"

FASTEN PANEL TO SUBSTRATE W/ PRE-DRILLED, COUNTERSUNK SQUARE DRIVE METAL FASTENERS, FINISH TO MATCH MTL-1, TYP.

SIM

2'-0"

1 1/4" TYP.

1'-1 1/2"

SIM, OPP 7 A7.01

1 1/2" x SOLID WO 4"

(N) KITCHEN EQUIPMENT

SOLID WOOD END, BEYOND

(N) FRP; WRAP ALL AROUND EXPOSED CASEWORK INTERIOR

PT-3

(E) CASEWORK ASSEMBLY

(N) RUBBER BASE ON INTERIOR OF EXPOSED CASEWORK; WRAP ALL AROUND CASEWORK INTERIOR 2'-9 5/16"

(E) DOOR BEYOND (E) BASE BEYOND

(N) Kitchen Equipment @ (E) Casework

SOLID WOOD END

(N) Banquette - Typ End Section

SCALE: 1 1/2" = 1'-0"

1 1/2" x 1 1/2" SOLID WOOD END

VENEEER WOOD (E) SOLID SURFACE COUNTERTOP

SCALE: 1 1/2" = 1'-0" 4"

(N) KITCHEN EQUIPMENT

1'-10 1/2"

8 A8.02

PT-3

OF EXPOSED CASEWORK; WRAP ALL AROUND CASEWORK INTERIOR

1'-0"

WD-2 SOLID WOOD END (E) CASEWORK

METAL MESH

WALL; PREP FOR PAINT

(N) Kitchen Equipment @ (E) Casework

BOLT & LOCKABLE WASHER; MATCH MTL-1

SCALE: 1 1/2" = 1'-0"

3'-6"

1'-6" MAX.

(2) 3/4" PLYWOOD VENEER WOOD

7°

SEAT BACK

BLOCKING, TYP

(E) DOOR BEYOND

3'-6"

Banquette construction details SCALE: 1 1/2" = 1'-0"

(E) COUNTERTOP

1'-10 1/2"

1'-3"

1'-10 1/2"

8 A8.02

(N) Banquette - Section

1 1/2" = 1'-0"

100% CONSTRUCTION DOCUMENTS

SCALE: 1 1/2" = 1'-0"

December 7, 2018

La Cantera Bazille MATCH WOOD REVEAL TO (E) CASEWORK REVEAL

1/2"

SOLID WOOD CAP, MATCH (E) TRIM

The Shops at La Cantera (732) 15900 La Cantera Parkway Building #13 San Antonio, Texas 78256

WD-2 SOLID WOOD END REMOVABLE VINYL CUSHION

4" 1'-6"

(N) Moveable Booth Enlarged Elevation

SCALE: 1 1/2" = 1'-0"

MTL-1 PIPE LEG

FINISH FLOOR 0"

1-1/4" OD METAL PIPE LEG

2" 2"

1" OD METAL PIPE BRACING

(E) Reupholstered Booth

3'-6"

Sections & Enlarged Elevations

1'-10 1/2"

PAINT REUSED TABLE BASE PER FURNITURE SCHEDULE

Date:

Sheet conte

Sheet:

VIF

(E) Reupholstered Booth SCALE: 1 1/2" = 1'-0"

1/2"

Scale:

PER NOTES ON ELEVATION

SOLID WOOD CAP, MATCH (E) TRIM

SCALE: 1 1/2" = 1'-0"

Project No.

(N) Banquette - Sectio 4 SCALE: 1 1/2" = 1'-0" Enlarg (E) BASE TO REMAIN, PAINT Eleva

SCALE: 1 1/2" = 1'-0"

(N) Moveable Booth Section - UPDATE

Sheet contents:

(N) TABLE TOP; REUSE (E) Sheet: TABLE BASE

SCALE: 1 1/2" = 1'-0"

2 A8.02

WALL BEYOND

Scale:

The Sho (732) 15900 La Building 1 1/2" = 1'-0" San Anto

A8.02

(N) Banquette - End Elevation

1" 1-1/4" ID METAL BUSHING

December 7, 2018

REUPHOLSTER (E) CUSHIONS; NO CHANGES TO (E) CUSHIONS

4'-0"

MTL-1 BUSHING

MTL-1-PIPE BUSHING Section UPDATE

SCALE: 1 1/2" = 1'-0"

1'-1"

SCALE: 1 1/2" = 1'-0" MTL-1 PIPE BRACING

(E) BASE TO REMAIN, PAINT PER NOTES ON ELEVATION

MTL-1 METAL PIPE LEG

1-1/4" ID METAL PIPE FLANGE

(N) Screen @ (E) POS Casework Section

1" OD METAL PIPE BRACING 1-1/4" ID METAL BUSHING

SOLID WOOD END

WD-2 SOLID EDGES MTL-1 PIPE FLANGE

(N)

(2) LAYERS 3/4" Moveable PLYWOODBooth

PIPE FLANGE

3'-6"

REMOVABLE VINYL CUSHION

MTL-1 BUSHING

1-1/4" OD METAL PIPE LEG

2" 2"MTL-1

MTL-1 PIPE LEG

Date:

REUPHOLSTER (E) CUSHIONS; NO CHANGES TO (E) CUSHIONS

1-1/4" ID METAL PIPE FLANGE

WD-2 SOLID WOOD ENDS

1821

1'-3"

REMOVABLE VINYL CUSHION

PAINT REUSED TABLE BASE PER FURNITURE SCHEDULE

WD-2 SOLID EDGES

MTL-1 PIPE BRACING

FINISH FLOOR

(2) LAYERS 3/4" PLYWOOD

SOLID WOOD PANEL

SOLID WOOD END

7°

MTL-1 PIPE FLANGE

VYL-1 REMOVABLE CUSHIONS (E) BASE

3'-6"

VYL-1 REMOVABLE CUSHIONS

La Ca

Project No. (N) TABLE TOP; REUSE (E) TABLE BASE

REMOVABLE VINYL CUSHION

MATCH WOOD REVEAL TO VYL-1 REMOVABLE (E) CASEWORK REVEAL 1'-6" CUSHION

1'-1"

VIF

1/2"

SEAT MAX

5" TO T.O.

MTL-1 GUARDRAIL

1'-1"

C:\Users\Connor\Documents\1821 La Cantera Cafe Bistro- Central_3_r19_connor.rvt

3'-6"

(E) CASEWORK

SEAT BACK

1'-5 1/2" TO T.O.

SOLID WOOD PANEL

7°

CON DO

SOLID WOOD CAP, MATCH (E) TRIM

PT-3

(E) BOOTH CUSHION

12 A9.01

Revision Type

FINISH FINISH FLOORFLOOR

FLATHEAD SQUARE DRIVEN COUNTERSUNK SCREW @ 12" O.C.; MATCH MTL-1 FINISH

2 A8.02

Date

BOLT; MATCH MTL-1 FINISH

2" X 1 1/4" 5 X 1/4" SCALE: METAL ANGLE

Rev. #

1-1/4" OD METAL PIPE LEG 1-1/4" ID METAL BUSHING; FASTEN TO VENEER WOOD PANEL (E) CONCRETE FLOOR W/ EXPANSION 1-1/4" ID METAL BUSHING; FASTEN TO BOLT; MATCH MTL-1 FINISH (E) CONCRETE FLOOR W/ EXPANSION

(N) Banquette - End Elevation

4'-0"

WALL BEYOND

(E) POS Casework Section

(N) Banquette - End Elevation

1-1/4" ID METAL PIPE FLANGE

1" OD METALWOOD PIPE BRACING VENEER PANEL

FINISH FLOOR

0" BOLT & LOCKABLE WASHER; MATCH MTL-1

(E) CASEWORK (N) Screen @ 6 FOR WALL; PREP SCALE: 1 1/2" = 1'-0" PAINT

(N) Kitchen Equipment @ (E) Casework 1-1/4" OD METAL PIPE LEG SCALE: 1 1/2" = 1'-0"

Approval Stamp:

MTL-1 METAL PIPE LEG

METAL MESH

Approval Sta

VIF

1'-0"

2" X 1 1/4" X 1/4" METAL ANGLE MTL-1 PIPE BUSHING BEYOND

2" X 1 1/4" X 1/4" METAL ANGLE PRE DRILL

FINISH FLOOR

Rev. #

1"SOLID OD WOOD METAL EDGEPIPE BRACING

1'-3"

WD-2 SOLID WOOD ENDS PIPE FLANGE BOLTMTL-1 & LOCKABLE WASHER; MATCH MTL-1

(2) 3/4" PLYWOOD 1-1/4" ID METAL PIPE FLANGE

1'-6" MAX.

MTL-1 PIPE FLANGE MTL-1 METAL PIPE LEG

REMOVABLE VINYL CUSHION

(E) BASE BEYOND

VYL-1 REMOVABLE CUSHION

(N) RUBBER BASE ON OF EXPOSED CASEW ALL AROUND CASEW INTERIOR

SOLID WOOD EDGE

3" (E) CASEWORK WD-2 SOLID WOOD ENDS

FINISH FLOOR

(E) CASEWORK ASSE

PT-3

WD-2 SOLID WOOD END

(E) BASE

(N) FRP; WRAP ALL A EXPOSED CASEWOR INTERIOR

REMOVABLE VINYL CUSHION

(E) BOOTH CUSHION

MTL-1 PIPE BUSHING

(N) KITCHEN EQUIPM 1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

BLOCKING, TYP

1'-10 1/2"

8 A8.02

FLATHEAD SQUARE DRIVEN COUNTERSUNK SCREW @ 12" O.C.; MATCH MTL-1 FINISH

(E) COUNTERTOP

(N) Banquette - Typ End Section SCALE: 1 1/2" = 1'-0"

VENEER WOOD SEAT BACK

7°

2" X 1 1/4" X 1/4" METAL ANGLE

VYL-1 REMOVABLE CUSHION

1507 Belmon Seattle, Wa

PT-3

(E) SOLID SURFACE (N) RUBBER BASE ON INTERIOR COUNTERTOP

(E) BASE BEYOND

2" X 1 1/4" X 1/4" METAL ANGLE PRE DRILL

SOLID WOOD END, BEYOND

(E) CASEWORK ASSEMBLY

(E) DOOR BEYOND

2" X 1 1/4" X 1/4" METAL ANGLE BEYOND

2'-9 5/16"

(N) FRP; WRAP ALL AROUND EXPOSED CASEWORK INTERIOR

MATCH WOOD REVEAL TO (E) CASEWORK REVEAL

SOLID WOOD END

(2) LAYERS 3/4" PLYWOOD

WD-2 SOLID EDGES

1-1/4" ID METAL PIPE FLANGE 1-1/4" OD METAL PIPE LEG

MTL-1 PIPE BRACING

2" 2"

MTL-1 PIPE LEG MTL-1 BUSHING

1" OD METAL PIPE BRACING

1'-1"

MTL-1 PIPE FLANGE

3'-6"

REMOVABLE VINYL CUSHION

SEAT BACK

REMOVABLE VINYL CUSHION

1'-6"

VYL-1 REMOVABLE CUSHIONS

SEAT MAX

5" TO T.O.

MTL-1 GUARDRAIL

1'-1"

C:\Users\Connor\Documents\1821 La Cantera Cafe Bistro- Central_3_r19_connor.rvt

3'-6"

1'-5 1/2" TO T.O.

SOLID WOOD PANEL

7°

12 A9.01

1-1/4" ID METAL BUSHING

(N) Moveable Booth Enlarged Elevation SCALE: 1 1/2" = 1'-0"

Movable booth construction details

(N) Moveable Booth Section - UPDATE SCALE: 1 1/2" = 1'-0"

Daniel’s broiler Downtown - Seattle, WA Graham Baba Architects

Graham Baba Architects was chosen by Daniel’s Broiler to design their first new restaurant in more than a decade. The clients wanted a space that offered the classic comfort of their existing restaurants, but with modern design cues and detailing. The material palette consists of dark woods and leather, with highlights from brass detailing, white table tops, and pops of color coming from movable furniture.

Role: Architectural Staff working with Principal-In-Charge and Project Architect

Tasks: • • • • •

AutoCAD support Detail development Fabricator coordination Shop drawing review Site visits

04B,Section Plan

/2" = 1'-0"

04B,Section Plan

/2" = 1'-0"

Left & below - Casework construction plans, elevation, and section

04B, Plan

/2" = 1'-0"

Daniel's Broiler 1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

Eighth and Howell 808 Howell Street Seattle WA 98101

Project No.

Sketch No.

SK016

Issued with: Date: Modifies:

04B, Plan

Scale:

/2" = 1'-0"

Daniel's Broiler 1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

Eighth and Howell 808 Howell Street Seattle WA 98101

Project No.

Sketch No.

SK016

Issued with: Date: Modifies: Scale:

CW-04B, FRONT ELEVATION

Leather-strap divider, photo by Andrew Pogue

Scale: 1/2" = 1'-0"

CW-04B, SIDE ELEV Scale: 1/2" = 1'-0"

CW-04B, TRANSVERSE SECTION 1

Scale: 1" = 1'-0"

Leather-strap divider section and axonometric details

CW-04B, BACK ELEVATION

Scale: 1/2" = 1'-0"

CW-04B, SIDE ELEV Scale: 1/2" = 1'-0"

Daniel's Broiler 1507 Belmont Ave, Suite 200 Seattle, Washington 98122 206.323.9932

Eighth and Howell 808 Howell Street Seattle WA 98101

Project No. Issued with: Date: Modifies: Scale:

CW-06, SECTION

Sketch No.

SK017

CW-06, LEATHER STRAP DETAIL

Sketches / Process

Mind the Gap- Undergraduate Thesis San Francisco, CA Advisor: Ansgar Killing

Our cities exist in fragments - districts. They thrive in their fragmentation; each part of the city offers its own identity and personality that makes it unique within the larger context. All of these fragments coexist and mix at their communal edges - creating smooth transitions from one to another. These edges create our experience of the city and tie it together as a bricolage. As districts change and grow, they adjust for their neighbors to maintain a connection to one another.

Site - Tenderloin, SF

Extrude form

How can architecture act as a mediator on this border? What kind of architecture can be implemented that negotiates the disjointed relationship of this urban border?

Bar typology - connect sides

Porous ground level connects plaza

Due to the stark differences in lifestyle, culture, and day-today activities on either side of this border, this project takes the stance of softening this transition from bustling Market Street to the corner of Turk & Taylor; from Downtown San Francisco to the heart of the Tenderloin. The main program includes a food market offering fresh foods and rotating stalls for new restaurants to occupy, an adult education center, and a hostel. Other program includes event spaces, galleries, and 24/7 accessible programs. By treating the project and programs as divisible objects instead of solid blocks, opportunities for otherwise unlikely interactions and encounters come to the surface.

Adjust to create plazas

Appropriate street for pedestrians

However, this transformation rarely happens cohesively throughout the city. Some districts inevitably get left behind, and over time, they never catch up and only fall farther into despair. A piece of the city that no longer operates with the greater bricolage of the city.

Exploded Axon Plan | Market

| Think Tank/Education

| Hostel

| Gallery

| Lounge/Library

Bellahøj Transit Hub Copenhagen, DK Advisor: Rune Veile

The Bellahøj Transit Hub strives to not only simplify public transit, but also provide a public space for an area of Copenhagen that lacks it. The site lies at the wedge of an intersection located above a major highway leading into central Copenhagen. This intersection also serves as a major thoroughfare for bikes, buses and pedestrians. All of this movement from fast traffic creates a dangerous environment for slower pedestrian traffic. The new Bellahøj Transit Hub consolidates the existing transit options and makes accommodations for the expanding metro network, parking for over 750 cars to encourage use of public transportation into central Copenhagen, and offers a unique pedestrian experience in a neighborhood of Copenhagen that doesn’t offer any space for urban life. The pedestrian plaza sits between the two main functions of the site - parking and transit - creating a protected zone to occupy and move through. The majority of the footprint is parking, but special consideration is given to the pedestrian experience by concealing parking under a layer of mixed program. This includes shopping, cafés and restaurants, offices and studios, and a community space with a view to downtown Copenhagen on the top floor. The whole project is defined by a simple diagram, where pedestrians occupy the space exposed to the sun, and the required functions lie under the surface.

Site

Contour surface for habitable terraces

Lift site for program

Flatten crease for pedestrian plaza

Program under terraces

Shift plaza and terraces for access

1 2

3 N

5 5

Ground Level Plan

Bicycle Access

Vehicle Access

Pedestrian Access - Commuter

Section

10’

Pedestrian Access - Leisure

200’

50’ 25’

100’

Bar 5

New York City, New York Advisor: Tom Fowler Located in the South Bronx neighborhood of New York City, this large site crawls down a steep hill, offering street access from two sides and enjoying view of lower manhattan. The various program elements were divided the along the length of the site, creating four bars. Taking inspiration from the surrounding area’s demographic, the living tower is placed on the more industrial side of the site to promote a more active edge, while the grocer, community kitchen, and cafe are placed on the more residential side to provide easy access to the whole community, with the office space, day-care, and performance space in the between. To further bring the project together, bridges spanning the plazas between each building a single, common ambulatory space augmented by large atria at the core of each building. With this, the fifth bar was created. With its system of bridges, bars, and atria, Bar5 comes together as a whole. The project provides a diverse, yet continuous set of programs for the redeveloping South Bronx community. Developed with Conor Beck

Section Model

3 2 1 6 4 5

Floor Plan - Bridge Level

N 25’ 10’

Section @ Bridge

100’ 50’

1 | Living 2 | Performance 3 | Pre-K

4 | Office/Co-working 5 | Fresh-Food Grocer / Cafe 6 | Community Kitchen

Playground For Culture Copenhagen, DK Advisor: Bo Christiansen

The new Playground for Culture strives to create a destination for the growing Ørestad neighborhood in Copenhagen. The area is known for its notable architecture, but is rarely visited by people not living in the neighborhood. The Bibiana Culture House creates a hub for culture and play that any age group can take part in. The spatial organization comes from the idea of a modern Danish playground; objects scattered in a field, versus a traditional ‘big toy’ playground, where there is one central object. Breaking up the program also creates intermediate plazas that allow for spontaneous activities. The whole building, including the plinth and roof canopy, is wrapped in Silver Fir. This gives the project a light aesthetic from the ground level while maintaining the view of the park that the surrounding apartments cherish so much.

Modern Playground

Addressing Scale

Plinth creates opportunity for passive engagement

Traditional ‘Big Toy’

Kid-sized nooks and play surfaces

3 2 4

Floor Plan

N 25’ 10’

Section

Spaces for child and adult interactions

50’

1 | Reception 2 | Cafe 3 | Play 4 | Read

5 | Art 6 | Dance/Activity 7 | Exhibition

Omni

City Street Advisor: Ansgar Killing Born from the idea of making the street a more livable place, Omni is designed to give the user a different idea of how street furniture effects the frame of the city. The initial design idea was to create a piece of furniture that made the street a more livable zone for the every day user. That idea transformed into a more conceptual approach to what street furniture does for the user and how they interact with it. What if the furniture had a response to the users? How would it react? How could it change a city dweller’s view of the city? Omni is born from a familiar piece of street furniture - a city bench. Starting with a standard bench, the shape is manipulated in 3-dimensions. The form is adjusted so the users are neither sitting parallel nor perpendicular to the sidewalk. With the triangular form offers perspective views down the sidewalk rather than having only one viewing angle. There is no correct orientation, leaving the position of the piece to the choice of the user. The informal shape is matched by the informal material - styrofoam. Being soft and lightweight, Omni can be a mobile part of the urban environment. The level variations and manipulated shape create the feeling that users are farther away from each other, when in reality they’re within each others’ personal space. The “personal space” zone is a 4’-10’ circle around an individual. On a flat, mono-directional bench, unrelated users will position themselves as far away from one another as possible. On Omni, the shorter distance between users is perceived as a more comfortable distance due to level changes and triangular form.

Process models - form finding

Construction process

Extroverted

Introverted

Mixed

Group usage

Easy mobility

Individual comfort

Urban Repossession Graffiti by Rodrigo Robles-Gonzalez

CONNOR DAVIDGE cdavidge92@gmail.com | 650 393 3037 | www.issuu.com/connordavidge