Midwest #3,2012 by Construction Equipment Guide

$3.00

Published Nationally

Midwest Edition

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 4

February 4, 2012 • Vol. IXX • No. 3 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com

Inside

Construction Employment On the Rise

rejected a plan to build an oil pipeline from Canada to Texas. But the Canadian government expressed optimism the Keystone XL pipeline will ultimately be approved. Natural Resource Minister Joe Oliver said it’s clear the process is not yet over and said

Construction employment rose in 28 states and the District of Columbia between December 2010 and December 2011, the largest number of states with year-over-year employment gains since November 2007, according to an analysis by the Associated General Contractors of America of Labor Department data. In contrast, 24 states plus D.C. lost jobs between November and December 2011, while 23 states added construction jobs for the month. “It is encouraging that a clear majority of states added jobs during 2011, but it is too early to conclude that the industry is on a steady upswing,” said Ken Simonson, the association’s chief economist. “Public construction is likely to shrink in 2012 and there are many uncertainties about home building, office and retail construction.” Seasonally adjusted construction employment climbed from November to December in 22 states — New Hampshire had the largest one-month percentage gain (4.9 percent, 1,000 jobs), while California added the largest number of construction jobs for the month (4,800 jobs, 0.8 percent). Vermont had the second largest one-month percent gain (4.7 percent, 600 jobs). Indiana added the second largest number of jobs for the month (3,600 jobs, 2.9 percent increase). Of the 25 states plus D.C. that lost construction jobs from November to December, West Virginia had the largest one-month percentage drop (minus 4.7 percent, minus 1,600 jobs), with New York next (minus 3.6 percent, minus 11,400 jobs), followed by Nevada (minus 3.5 percent, minus 2,000 jobs) with Wyoming (minus 3.0 percent, minus 700 jobs) and Rhode Island (minus 3.0 per-

see PIPELINE page 67

see JOBS page 67

AED Hol ds Annual Summit, CONDEX in D.C. …12

Erb Equipment A nnounces New Appoint ments...18

There are different measures and projections of Michigan road quality, but none of them look good over the next five to 10 years at current funding levels.

Gov. Looking to Invest $1.4B in Michigan’s Roads, Bridges By Tim Martin ASSOCIATED PRESS MITA Holds A nnual Conf erenc e... 28

Table of Contents ........4 Attachment Section ...... ............................29-31 Recycling Section 43-53 Truck & Trailer ....59-63 Auction Section ....71-79 Business Calendar…..72 Advertisers Index ......78

LANSING, Mich. (AP) Gov. Rick Snyder said it makes financial sense to start paying more to fix roads now rather than wait and face an even bigger annual repair bill in the future. The Republican governor — a certified public accountant by training — is pushing lawmakers to

raise an additional $1.4 billion a year for roads and bridges, and he wants to start the process sooner rather than later. “When you’re talking transportation infrastructure, you should have a 10- or 20-year mindset,” Snyder told The Associated Press the day after his recent State of the State address. “This is the accountant coming out in me again. By investing see FUNDING page 42

Canada ‘Profoundly Disappointed’ Over Keystone Pipeline Rejection By Rob Gillies ASSOCIATED PRESS

TORONTO (AP) Canadian prime minister Stephen Harper said Jan. 18 he told Barack Obama he was profoundly disappointed after the U.S. president called to tell him the administration

Page 2 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call 877-688-2228 Fax: 630-279-9243 www.pattencat.com Complete inventory available online

MOTORGRADERS

SKID STEERS

Cat 140M, 2008, N5749, EROPS, A/C, Heat, Ripper........$285,000

Cat 226B2, 2009, W2130 NA, EROPS, Hyd QC ................$29,000 Cat 252B2, 2005, UE1485, EROPS, Heat ..........................$26,500

COMPACTION

Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000

PATTEN CONSTRUCTION PRODUCTS

Cat 236B, 2007, UE1540, OROPS, Self-Lev, Hyd QC ........$18,500 Cat 236B, 2006, UE1542, OROPS, Self-Lev ......................$18,000

Cat CP433E, 2005, UN2062, OROPS ................................$58,000

ID# N4761 $49,000

Cat 246C, 2007, W1613, EROPS, Heat, Man, QC ..............$26,500

Cat CS54, 2008, N5757, OROPS, Sm Drum ....................$115,000 Cat CS-433E, 2005, UN2129, OROPS................................$48,000

Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ............$36,000

TRACK LOADERS

Cat 256C, 2007, W1533, EROPS, Heat, A/C ......................$32,000 Cat 256C, 2007, W1531, EROPS, Heat, Hyd QC, SF Hyd ..$34,000

Cat 953C, 2006, N4908, EROPS, A/C, GP Bkt....................$80,000

Cat 257B, 2005, W0539, Self-Leveling, Man QC ..............$27,000

Cat 953C, 2006, N4827, EROPS, A/C, GP Bkt ..................$80,000

Cat 257B, 2007, W1522, EROPS, Heat ..............................$29,000 Cat 272C, 2007, W1905 NA, EROPS, Heat, A/C ................$42,000

ID# UN1922 $122,000

Cat 953C, 2006, N4907, EROPS, 2.25 CYD GP Bkt ..........$85,000 Cat 963C, 2005, N4354, EROPS, A/C, GP Bkt ................$125,000

Cat 287B, 2007, W1561, Self-Leveling, Man QC ..............$39,000

Cat 963C, 2007, N5363, EROPS, 3 CYD GP Bkt ..............$145,000

Cat 289C, 2009, W2058, EROPS, Heat, A/C ......................$48,000

Cat 963C, 2007, N5394, EROPS, 3 CYD GP Bkt ..............$145,000

Cat 289C, 2009, W2115, EROPS, Heat, Hyd QC ................$57,000

Cat 963D, 2008, N5718, EROPS, GP Bkt ........................$170,000

Cat 297C, 2007, W1548 NA, EROPS, SF Hyd, Hyd QC ......$50,000

TELEHANDLERS

DOZERS

Cat TH360B, 2006, N4761, EROPS, Heat, A/C ..................$49,000 Cat D4G LGP, 2006, N4970, EROPS, A/C ..........................$65,000

WHEEL LOADERS/LOADER BACKHOES

Cat D5G LGP, 2006, N4976, EROPS, A/C ..........................$84,000 Cat D5G XL, 2007, N5413, EROPS, Heat, A/C ..................$80,000 Cat D5G XL, 2007, N5469, EROPS, Heat, A/C ..................$75,000

Cat 416E, 2007, N5303, EROPS, Heat, A/C, E-Stick ..........$78,000

ID# N5591 $180,000

Cat D5G XL, 2007, N5601, EROPS, Heat, A/C ..................$80,000

Cat 420E IT, 2008, UE1253, EROPS, Heat, A/C, E-Stick ....$70,000 Cat 430E, 2007, N5471, EROPS, Heat, A/C, Ride Cntrl......$80,000

Cat D5K LGP, 2008, N5711, EROPS, Heat, 3rd Valve ......$106,000

Cat 430E, 2007, N5415, EROPS, Heat, A/C, QC ................$96,000

Cat D6K LGP, 2009, N6055 NA, EROPS, 4 Valve Hyd......$148,000 Cat D6N XL, 2007, N5477, EROPS, Heat, A/C ................$190,000

Cat 430E IT, 2006, N5209, EROPS, A/C, E-Stick................$56,000

Cat D6N XL, 2007, N5335, EROPS, 4th Valve, PAT Blade$165,000

Cat 906H, 2009, UE1497, EROPS, Ride Ctrl, QC ..............$68,000 Cat 924GZ, 2007, N5786, EROPS, Heat, Ride Control ....$100,000

EXCAVATORS Cat 303.5C CR, 2007, W1167, EROPS, A/C ......................$34,000

Cat 924GZ, 2008, N6148, EROPS, Heat, A/C, 2.6 CuYd Bkt ....$94,000

ID# N5749 $285,000

Cat 924H, 2007, N5786, EROPS, Heat, A/C, 2.6 CYD Bkt$100,000 Cat 930G, 2006, UN1922, EROPS, Heat, A/C ..................$122,000

Cat 304CCR, 2006, W0930, OROPS, 2-Way Aux Hyd ......$43,000 Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ..........$36,000

Cat 930G, 2007, N5772, EROPS, 2.9 CYD Bkt, Ride Cntl ..$115,000

Cat 315CL, 2006, N4867, EROPS, Heat, A/C, QC ..............$78,000

Cat 930H, 2008, N5661, EROPS, Ride Cntl ........................$132,000

Cat 315CL, 2007, N5239, EROPS, 10’2” Stick, QC ............$80,000

Cat 938GII, 2006, N5064, EROPS, A/C, Heat, Ride Cntrl $100,000 Cat 938GII, 2006, UE1454, EROPS, Heat, A/C ................$105,000

Chad Benz 630-758-1226 benzc@pattenindustries.com

Cat 950H, 2007, N5284, EROPS, Heat, Ride Cntrl ..........$175,000 Cat 950H, 2007, N5594, EROPS, Heat, Ride Cntrl ..........$190,000

ID# N5413 $80,000

CALL 887-688-2228

Cat 980H, 2008, UE1484, EROPS, Heat, A/C ..................$364,000

INVENTORY CHANGES DAILY

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 3

320 Briscoe Drive Morris, Illinois 60450 Toll Free: (800) 941-2133 Email: sales@iltruck.com

www.iltruck.com

RENTAL FLEET REDUCTION SALE

1996 Cat 815F, Cat 3306 220HP Diesel, 4-36” Padfoot Drums with Cleaners, Cab w/AC, 12’3” Hydraulic Leveling Blade, 7386 Hrs ..............$119,500

UNUSED 2007 New Holland D95 LGP Pipelayer, Canopy, 667T/M2 99HP Dsl, 10’10” 6-Way Blade, 28” Pads, Midwestern M520C 15’ Side Boom, Max Lift 20,000#, Max Work Load 17,000# @ 4’ Overhang, Hydrostatic Trans., 28,000 Lbs, 34 Hrs........$112,500

2004 John Deere 700H LGP, Canopy, JD 6068H 123HP Diesel, 22” Pads, 11’ 6-Way Blade, Hydrostat Drive, JD Winch, 29,350 Lbs, 2352 Hrs ........$69,500

2004 Cat 320CL, Cab w/AC, Cat 3066 147 HP Diesel, 9’7” Stick, 22’ Dig Depth, 32” Pads, Cat Hydraulic QCoupler, 52” Cat Q-Coupler Bkt, Aux Hyd, Pattern Control, 50,700 Lbs, 3210 Hrs ....................$105,500

2000 Cat 416C IT, Cab & Heat, Cat 3054T 78HP Diesel, 4WD, Extend-a-Hoe, Lever Controls, 1.3 Yard Loader Bkt, 24” Digging Bkt, Stabilizers, 12.5/80R18 Front Tires, 19.5L-24 Rear Tires, 21,300 Lbs, 2432 Hrs, Forks Available ........................................$37,500

2008 Cat 272C, Cab, Heat & A/C, Cat/Mitsubishi 3044C 71HP Diesel, Hand Controls, 2 Speed, Aux. Hyd, Hydraulic Mount Plate, 3250# Operating Capacity, 72” Bkt, 33x6x11 Solid Tires, 8362 Lbs, 585 Hrs ....$36,500

2004 New Holland DC95 LGP, Canopy, NH 667T 99HP Diesel, 28” Pads, 10’ 8” 6-Way Blade, Hydrostat Drive, 20,700 Lbs, 2384 Hrs ..........................$36,500

2002 Wacker RT820, 32” Vibratory Trench Roller, Remote Control, Lombardi 18HP Diesel, 2960 Lbs, 192 Hrs ..........................................................$12,500

2003 Cat 725, cab with A/C, Cat C11 309HP diesel, 25 ton capacity (18.8 yards), 6WD, 23.5R25 tires, 49,100 lbs., 9331 hours ................................$89,500

LaBounty HDR50QC 2.5-3.5 CUYD 2 to 3 Tine Grapple for Kobelco SK210, 113” Opening, 3700# (Installation Charges Apply) ....................................................................$22,750

2010 LaBounty HDR70QC 2.5-5.5 CUYD 2 to 3 Tine Grapple for Kobelco SK330, 116” Opening, 5400# (Installation Charges Apply)............................$26,750

(4) 2007 Icon 821 Scrapers, 21 cubic yard ejectors, 11’ cut, heavy cast 360 swivel quick hitch, 26,500 lbs., (2) 20.5x25 inside tires, (2) 23.5x25 outside tires$44,500 Ea.

(4) UNUSED 2007 Icon 418T Scrapers, 18 cubic yard hydraulic dump, 11’ cut, heavy cast 360 swivel quick hitch, 23,200 lbs., (4) 20.5x25 tires ........$39,500 Ea.

1973 Cat 815A, 4- 38” padfoot drums with cleaners, canopy, Cat 3306 10.5L 170HP diesel, 11’ 9” hydraulic leveling blade, 40,058 lbs, meter reads 2269 hrs ........................................................$34,500

2006 Reynolds 17CS12, 17 Yard Dump, 12’ Cut, (4) 20.5x25 Tires..................................................$37,500

2006 Icon 18D, 18 cubic yard hydraulic dump, 11’ cut, (4) 20.5x25 tires, hydraulic brakes ....................$23,500

Page 4 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MIDWEST EDITION Circulated Throughout

IN THIS ISSUE SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

Founder, Publisher & CEO Vice President Emeritus Midwest Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

FEATURES…

AED HOLDS ANNUAL SUMMIT, CONDEX SHOW IN D.C.

Representatives from the industry’s leading dealerships and manufacturers from the United States, Canada and abroad attended the AED convention at the Gaylord National Resort & Convention Center.

MCALLISTER EQUIPMENT APPOINTS EVANS AS USED EQUIPMENT MANAGER

LOOKING TO THE FUTURE IS PREVAILING THEME AT MITA ANNUAL CONFERENCE

As a state wide association focused on Michigan’s road and bridge, sewer and water, utility, railroad, excavation and specialty construction, MITA represents nearly 600 Michigan companies throughout the state.

33 42

LIUGONG ACQUIRES HSW, DRESSTA CO.

The agreement was signed by both companies’ executives in Warsaw with celebration ceremonies following at the Baranów Sandomierski Castle in Baranów Sandomierski, Poland.

WHAYNE SUPPLY COMPANY UNVEILS CAT CT660 VOCATIONAL TRUCK

The truck was delivered by Frank Lewis, vice president of power systems of Whayne Supply Company and presented at the company’s branch in Paducah, Ky. Jim Smith Contracting owner Rex Smith was present to accept the truck.

CONSTRUCTION MATERIALS PRICES DROP AGAIN; REMAIN UP FROM DECEMBER 2010 Association officials said the fact contractors continue to be squeezed between materials costs and what they can charge is making difficult market conditions worse.

77 28

Web site Editorial e-mail Advertising e-mail For advertising rates Contact

Edwin M. McKeon Sr. Hal Ewing Joseph S. McKeon Craig Mongeau Ken Kolasinski Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com Joseph S. McKeon •Illinois •Wisconsin •Northwest Indiana

Based at the company’s Alsip, Ill., store, Richard Evans will be responsible for purchasing and selling used equipment.

Toll Free Fax

•North & South Dakota •Nebraska •Kansas •Minnesota •Iowa •Missouri •Illinois •Wisconsin •Michigan •Indiana •Ohio •Kentucky

•Missouri •Kansas 773/769-4090 800/632-0233 773/769-4280 e-mail jmckeon@cegltd.com

Toll Free Fax

Contact

Ed Bryden •Central and Eastern Indiana •Michigan •Ohio •Kentucky

440/268-9690 800/810-7640 440/268-9691 e-mail ebryden@cegltd.com

Toll Free Fax

Contact

Patrick Kiel •Iowa •Minnesota •Nebraska •North Dakota •South Dakota

952/353-1770 866/413-4265 952/353-2750 e-mail pkiel@cegltd.com

Toll Free Fax

ALTORFER RENTAL LOCATION NOW OPEN IN SPRINGFIELD, ILLINOIS

Steve Mowbray, vice president of Altorfer’s rental division, said this addition provides greater product availability and services to customers in the Springfield area.

68 CLASSIFIEDS 71 COMING AUCTIONS 72 BUSINESS CALENDAR

EQUIPMENT… 54 DOOSAN Tier IVi Mobile Generators 64 BOBCAT E55 Compact Excavator

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 5

We Buy USED Equipment – One Piece or Entire Fleets – Call Jay Germann

Cat 926, ’86, 15,870 hrs ..........................$26,500

Case CX240B, ’07, 4810 hrs..................$114,500

BACKHOE LOADER

BOOM MOWERS

OFF ROAD TRUCKS

Komatsu WB140-2N, ’04, 2,805 hrs ..........$CALL

Tiger TSR-60C, ’06, NEW ........................$14,500 Tiger TSF-75C, ’06, 60 hrs ......................$12,000

Kenworth T800 Water Truck ....................$13,500 Komatsu HD785-5, ’01, 22,508 hrs............$CALL Komatsu HD785-5, ’01, 25,415 hrs............$CALL

COMPACTION, MILLING & PAVING Cat C563, ’94, 5794 hrs ..........................$31,500 Gehl 1649 Paver, ’01, 433 hrs ................$24,500 Hamm 3307, ’03, 687 hrs........................$33,500 Hamm HD14VV, ’08, 816 hrs ..................$32,500 Hamm HD14VT, ’09, 1083 hrs ................$32,500 Hypac C747B, ’01, 3,524 hrs ....................$9,500 LeeBoy 1000D, ’03, 1475 hrs ..................$19,500 LeeBoy 8500LD, ’00, 1535 hrs ................$29,500 LeeBoy 8500LD, ‘04, 2739 hrs ................$26,500 LeeBoy 8500LD, ’04, 1823 hrs ................$24,500 LeeBoy 8510LD, ’06, 306 hrs ..................$74,500 LeeBoy 8515, ’00, 1303 hrs ....................$53,500 Rosco TRUPAC915, ‘05, 481 hrs ............$32,500 Vogele SUPER 700, ’07, 80 hrs ................$CALL Wirtgen W1200F, ’05, 3,150 hrs ................$CALL Wirtgen W2000, ’03, 2996 hrs ..................$CALL Wirtgen W2000, ’96, 9346 hrs ..................$CALL Wirtgen WR2000, ’11, 334 hrs ..................$CALL Wirtgen WR2500S, ’07, 3,100 hrs ............$CALL

V I S I T

DOZERS Case 850K XLT, ’04, 2,646 hrs ................$47,500 Cat D4C LGP, ’98, 4617 hrs ....................$24,500 Cat D5C, ’97, 6931 hrs ............................$26,500 Komatsu D37P-5, ’94, UKN hrs ..............$18,500 Komatsu D37P-5, ’98, 2624 hrs ..............$20,500 Komatsu D39E-1, ’98, 6,585 hrs..............$29,500 Komatsu D39P-1, ’97, 6,189 hrs ............$27,500 Komatsu D39EX-21A, ’05, 1,176 hrs ......$57,500 Komatsu D61EX-15, ’05, 4,778 hrs ......$114,500 Komatsu D65PX-12, ‘96, 4969 hrs ..........$49,500 Komatsu D85E-12, ’78 ............................$24,500

EXCAVATORS Case CX240B, ’07, 4810 hrs..................$114,500 Komatsu PC138USLC-8, ’09, 2,363 hrs $104,500 Komatsu PC138USLC-2EO, ’07, 4377 hrs$69,500 Komatsu PC138USLC-8, ’07, 3935 hrs....$77,500 Komatsu PC150LC-6, ‘98, 9246 hrs ........$39,500 Komatsu PC270LC-7, ’04, 4,608 hrs ....$124,500 Komatsu PC300LC-7EO, ‘06, 3004 hrs..$159,500 Komatsu PC300LC-7EO, ‘07, 1230 hrs..$189,500 Komatsu PC750LC-7, ‘05, 4517 hrs ..........$CALL

FORESTRY Fabtek 346B Forwarder, ’03, 8978 hrs..$112,000 Fabtek 344LB Forwarder, ’02, 13,200 hrs ............ ................................................................$42,000 Fecon FTX130-FM, ’06, 875 hrs ..............$86,500 Franklin 132XL Forwarder,......................$16,000 Franklin 3000/Stroke Head, ’92 ................$9,800 K-2 Four Wheel Forwarder, ’05, 2,160 hrs ....$90,000 Log Lift F-135 Log Loader, ’05..........................$7,000 Valmet 840.3/8, ’05, 9800 hrs ..............$165,000 Valmet 840.3/8, ’06, 9,592 hrs..............$185,000 Valmet 901C/960, ’99, 13,000 hrs ..........$65,000

SHREDDERS, TROMMELS Doppstadt DW3060K, ’09, 328 hrs ............$CALL Doppstadt DW3060SA, ’09, 410 hrs ..........$CALL Doppstadt SM617, ’09, 290 hrs ................$CALL Doppstadt SM720, ’09, 235 hrs ................$CALL Doppstadt SM726, ’09, 257 hrs ................$CALL

WHEEL LOADERS Case 621, ’89, 5969 hrs ..........................$24,500 Cat 926, ’86, 15,870 hrs ..........................$26,500 Dresser 540, ’89, 4,082 hrs ....................$24,500 Komatsu WA200-5, ‘07, 2528 hrs ..........$93,500 Komatsu WA320-6, ’08, 3961 hrs ........$126,500 Komatsu WA380-5, ‘06, 4965 hrs ........$132,500 Komatsu WA400-5L, ’04, 7,169 hrs ........$94,500 Komatsu WA420-1, ’88............................$39,500 Hamm HD14VV, ’08, 816 hrs ..................$32,500 Volvo L220E, ’03, 15,335 hrs ..................$49,500

Hamm HD14VT, ’09, 1083 hrs ................$32,500

Financing Available for Qualified Buyers

15 Roland Branch Locations in IL, IN, MI, MO, and WI

Call Jay Germann (217) 789-7711 • Email: jgermann@rolandmachinery.com

R O L A N D M A C H I N E R Y . C O M

Page 6 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770

Excavator Rental Specials Bolingbrook, IL

Serving the Constructor ®

View our complete Used & “Like New” inventory at McCannOnline.com

Clean, reliable equipment2002QCase Competitive rates 60XT,

Rent by the day, or month 2006week, Case

s/n JAF0350383, 2300 Hours, Rops, Aux hyds, 12 X 16.5 Foam Filled Tires, New 73” Bucket $15,000

CX130 Excavator

Delivered to your2006 jobCase site

CX210, s/n DAC213006, 4200 Hours, 18' 8" Boom Arm, 9' 10", Shoe 3-Bar Steel 24", Cntl Pattern Valve, Dbl Acting Aux Hyd, Coupler $89,000

CX160 Excavator

MC r h EJH EFQUI $410/Day, $1,230/Week, $3,690/Month

MC r h EJH EFQUI 2010 Case 450, $475/Day, $1,425/Week, $4,275/Month s/n NAM419568, 138 Hours, Rops, 2 Speed, Block Heater, Manual Coupler, 73” Bucket $34,500

CX330, s/n N6SAP7025, 5100 Hours, Cab w/Heat/AC, Boom 21'2", arm 13'3", 31.5" -3Bar Steel Shoes, Control selector Valve, Kent Cplr $137,000

CX210 Excavator

CX225 Excavator

MC r h EJH EFQUI Low Hour 2007 $580/Day, $1,740/Week, $5,220/Month Atlas Copco Air Compressors, 6 to choose from Starting at $7,500

MC r h EJH EFQUI 2004 Takeuchi $755/ Day, $2,265/Week, $6,795/Month TL140, s/n 21402072, 2999 Hours, Cab w/Heat & AC, Faster Hyd Couplers, 76" Tooth Bkt, Tak Controls, Rubber Tracks $24,000

Rent Today!

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110 McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana CX240 Excavator

CX330 Excavator

MC r h EJH EFQUI $700/Day, $2,100/Week, $6,300/Month

MC r h EJH EFQUI MC r h EJH EFQUI equipment. Call us today to supply your next $875/Day, $2,625/Week, $7,875/Month $1,235/Day, $3,705/Week, $11,115/Month

McCann CX460 Rents aExcavator full line of heavy and light construction rental. McCannOnline.com

Mustang 442 Skid Loader, 40HP, Open Canopy, Single Pin, I/D: 6419222308, 5252 Hrs, $8,995

Mustang MTL16 Track Loader, 67HP, Open Canopy, I/D: 300617, 1825 Hrs, $21,995

Gehl DL6, 6000# Lift, 42’ Boom, Open Canopy, Outriggers, I/D: 320796, 2770 Hrs, $35,950

Allen Engineering MSP415, 35HP, 4’ Rotors, I/D: 008005, 215 Hrs, $12,250

Elliott L40R, Hi-Reach Truck w/45’ Working Height, I/D: EX5186, 40 Hrs, $113,900

Mustang ME7503ZT, 16,000# Excavator, Cab, Heat, I/D: C03291, 1700 Hrs, $57,995

★ CONSTRUCTION

EQUIPMENT & SUPPLIES SINCE 1968

STAR EQUIPMENT LT D .

Call Sales 515-283-2215 • 800-352-5401 1401 2nd Ave • Des Moines, IA 50314 www.starequip.com

Des Moines • Ames • Cedar Rapids • Waterloo

Schererville* 219-865-6545 *Case authorized dealer location

CALL DOUG OR SAM (866) 485-7180 WWW.RBUSED.COM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 7

1988 Cat 627E ........................................$85,000

Cat 426C ................................................$31,500

1994 CAT D4HXL ..................................$28,500

S/N 6GB00654, 22,350 hours, Erops, push pull, tires 2 good – 2 fair, retarder, p t guard

S/N 6GB00655, 22,447 hours, Erops, push pull, tires good, retarder, p t guard

S/N 6XN03727, 5174 Hrs, EROPS, E-Stick, 4x4, 24” Bkt, Tires Good

S/N 8PJ00616, 9847 hrs, Orops, 90% undercarriage remaining, V PAT BLADE

1995 CAT CB214C ................................$13,500

1979 Cat 631D ......................................$49,500

2003 Cat D8RII ....................................$239,000

1998 CAT D6RLGP ................................$82,000

S/N 9XK00201, 888 hrs, 39" roller, rops, working lights

S/N 24W02603, 9284 hours, orops, tires fair

S/N 6YZ01286, 11576 hrs,Erops, s u blade, new track groups, hydraulic ripper

S/N 8TM00531, 12,890 Hrs, EROPS, A/C, Pins & Bushings Turned at 12,842 Hrs, 6S LGP Blade

2006 Cat D5KLGP................................$115,000

2005 CAT 247B ......................................$21,000

1998 Cat D6RLGP..................................$75,000

2009 Gehl 7810E....................................$24,500

S/N YYY00151, 1504 hrs, Erops, A/C, 26” tracks, blade

S/N MTL01299, 2,274 Hrs, EROPS, Aux. Hyd., Good U/C, Bucket, Heat, 1-speed

S/N 9PN00987, 9119 hrs, Orops, Good U/C – turned, S blade, no leaks

S/N 905605, 4038 Hrs, EROPS, Heat, Manual Coupler, 2-Speed, No Bkt, Tires: 2 Good, 2 Fair

2006 Cat 216B ......................................$18,500

2000 CAT D5CXLIII................................$29,500

1977 Cat D6D ........................................$29,500

2008 Cat 272C........................................$33,500

S/N RLL03958, 1050 hrs, Orops, bucket, man quick coupler, heat, 1-speed

S/N 7PS01311, 3315 Hrs, EROPS, Undercarriage Fair

S/N 04X01976, 6041 Hrs, OROPS, S Blade with Hydraulic Tilt, 22” Pads

S/N RED00965, EROPS, A/C, Tires Fair, 1743 hrs, Hyd Quick Coupler

Please Contact Bob Williams or Jeff Speer

800/353-1944

414/461-9100

Outside WI & Upper Michigan

Within WI & Upper Michigan

11200 W Silver Spring Rd. Milwaukee, WI 53225

www.FABCO.com Hundreds of machines. Listings updated daily.

Page 8 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL • No tools required • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • One hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industy acclaimed • 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

CONTACT: Dallas, Texas Chris Spainhour E m a i l : s o l i d a @ c h a r t e r. n e t

TOLL FREE: 800-489-1422 Fax: 214-630-5419 Cell: 817-714-7176 w w w. s o l i d a - w e r k . c o m

(CERTIFIED IN GERMANY)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees WHEEL LOADERS Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25 rubber, 15K hours, work ready . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42,500 Cat 936E, 1989, EROPS, 2.75 cy GP bkt, clean . . . . . . . . . . . . . . . . . . . . . . . .$59,000 Komatsu WA250-3PT, 1999, EROPS w/AC, JRB coupler, bucket, forks 20.5x25, good cond. . . . . . . . . . . . . . . . . . . . . . . .$63,500 Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 $79,500 John Deere 624G, 1996, EROPS, quick coupler, GP bkt, 20.5x25 tires . . . . . . .$46,000 Volvo L60E, 2005, EROPS, coupler, aux hyd, boom susp, 20.5R25, v. good . . . .$89,500 COMPACTORS IR SD100D Pro-Pac Vibratory Compactor, 1999, Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . .$52,500 IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . .$74,500 IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500 IR SD150F, 84" Padfoot, 1998, OROPS . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit, ROPS . . . . . . . . . . . . . . .$62,500 IR SD70D, 2000, Pro-Pac, 66" smooth drum, ROPS . . . . . . . . . . . . . . . . . . . . . . .$49,000 Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, very nice . . . . . . . . . . . . . . . .$205,000 (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all work ready . . . . . . .From $79,500 Multiquip MR8G Walk Behind Vibratory Compactor, 1997, Briggs & Stratton 8 HP gas engine . . . . . . . . . . . . . . . . . . . . . . . .$2,500 Rammax Walk Behind Rollers, over 25 in stock, lever & remote . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . .$4,000 - $6,500

LANDSCAPING Case 480 Broom Tractor, frt mounted 6' sweepster broom, ROPS . . . . . . . .$13,000 Case/IH 485 Utility Tractor, 1986, Case 3 cyl dsl engine, 55 gal water tank . . . . .$10,500 Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72" hydraulic broom . . . . . .$11,500 Taylor-Way 12' Transport Disc, 24" discs, (4) tires, hyd lift, exc . . . . . . . . . . . . . .$15,500 Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,500

CRAWLER LOADERS

MOTOR SCRAPERS Cat 613C Water Wagon, 1994, 5000 gal drop tank, ROPS, spray heads . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . .CALL Cat 621E, 1989, Scraper, OROPS, 33.25x29, OFF ROAD HAULERS Komatsu CD60R-1 Crawler Dump Truck, very nice . . . . . . . . . . . . . . . . . . . . . . .CALL 1997, 360° rotation . . . . . . . . . . . .$66,000 (2) Cat 637 scrapers, 1975, 91P series, dual Volvo A40, 1998, 40 tons, 10991 hrs, 395 engine, OROPS, good rubber . .$23,500 Ea. hp, 8WD, 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently off work), work HYDRAULIC EXCAVATORS ready . . . . . . . . . . . . . . . . . . . . . . .$127,500 JD 490E, 1994, 9'11" stick, Aux. hydraulics, Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, quick coupler, 6-7000 hrs, Fleet maintained . 29.5R25, working everyday . . . . .$145,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,000 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, Hitachi UH181, 1985, Equipped w/hammer . 20.5R25, A/C, P/S trans, 29 cy cap., 6/06 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000 hitch rebuilt . . . . . . . . . . . . . . . . .$115,000 Gradall-Hopto 300, 1968, G.M. diesel UP, on Volvo A40, 1995, 40 tons, 395 hp, 8WD, rubber, operational . . . . . . .$10,500/OFFER 29.5R25, A/C, P/S trans, tailgate, work ready Cat 215BLC, 1985, 7'3" stick, 28" TBG pads, . . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000 Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 10 roller U/C . . . . . . . . . . . . . . . . . $31,500 tires, approx 7,000 hrs, good condition . . . .. Kobelco SK200LC Extra Long Reach, 1993, . . . . . . . . . . . . . . . . . . . . . . . . . . .$147,500 32" TBG pads, 42' reach, nice . . . .$68,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, Komatsu PC200 LC-6, 1996, 32" pads, 42" 26.5x25, A/C, P/S trans, working everyday on Bkt, long stick . . . . . . . . . . . . . . . . .$39,500 jobsites . . . . . . . . . . . . . . . . . . . . . .$87,500 Komatsu PC200 LC-6, 1996, 24" pads, 9'7" Volvo A35, 1995, 35 tons, 326 hp, 6WD, stick, 44" Bkt . . . . . . . . . . . . . . . . . .$43,500 26.5R25, A/C, P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . .$89,000 Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 bkt, 27.6" TBG pads, work ready . .$57,000 hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans, (5) Komatsu PC128UU, 1996, offset boom, works everyday . . . . . . . . . . . . . . .$122,500 rubber tracks, low hrs . . . . . . . . . . . . .CALL Komatsu PC750 LC-6, 1999, 454 hp, 27” CRAWLER TRACTORS boom, 11’10” stick, 44’ DGB, aux plumbing, Cat D6H, 1987, Semi U blade w/tilt, ROPS, bucket choice, 24k ctwt . . . . . . . .$255,000 fair U/C . . . . . . . . . . . . . . . . . . . . . .$74,000 Komatsu PC400 LC-6LK, 1999, 10’6” stick, (2) Cat D6TXW, 2008, ROPS w/sweeps, aJRB coupler, 31.5” TBG, ctwt removal, choice blade, winches, v. good . . . . .$175,000 Ea. Cat D8N, 1991, ROPS, drawbar, S-U blade .. of bkt . . . . . . . . . . . . . . . . . . . . . . .$77,500 . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85,000 Komatsu PC400 LC-6LK, 11’1” stick, 35.5” (2) JD 450G, 1996, wide tracks, ROPS, PAT TBG, ctwt removal, choice of bkts, working blade . . . . . . . . . . . . . . . . . . . .$39,000 Ea. everyday . . . . . . . . . . . . . . . . . . . . .$97,500 Komatsu PC160 LC-7KA, 2004, 24” TBG CRANES pads, JRB coupler, plumbed, 8’6” width, nice, Broderson IC80-1B, 1984, 8.5 ton, Perkins work ready . . . . . . . . . . . . . . . . . . . . . .CALL dsl, OROPS, 20’ boom,, 3500hrs, good . . . .. Volvo EC460B LC, 2003, 4600 hrs, 23’ . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500 boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, hammer/shear plumbing very good condition dual fuel, 10.00R15 tires, 3,400 hrs$21,500 Grove RT58C, 1981, down cab, 18 ton r.t., . . . . . . . . . . . . . . . . . . . . . . . . . . .$159,000 70' boom anti-two block, GM dsl, clean . . .. TRUCKS & TRAILERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500 Drott 3330B Carry Deck, 7.5 ton capacity, (2) 48' Box Vans w/Liftgates, Good dsl, 4 section boom 8' jib . . . . . . . .$14,500 Condition . . . . . . . . . . . . . . . . . . . . . . .CALL Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500 Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . .$46,000

AIR COMPRESSORS IR 185’s, JD diesels . . . . . . . . . . . . . .CALL SPECIALS Vermeer 5800 Trencher, 1997, 4 cyl dsl eng . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11,900 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . . . . . . . . . . . . . . . . . .From $5,200 IAmerican Augers 16" Boring Machine, 10 HP gas, 35,000# thrust, 30' track . .$7,500 BACKHOES Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . .$24,500 Volvo BL60, 2006, 4x4, EROPS, ext hoe, aux hyd . . . . . . . . . . . . . . . . . . . . . . . . .$32,500 CRUSHING & CONVEYING Read RD90B screening plant, 1994, Lister diesel, dual tires on axle, hyd extensions, good condition, work ready . . . . . .$32,500 Viper 301 Portable Screening Plant, 1997, dsl, 5'x7'. side & rear conveyors, T/A carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL DRILLS John Henry Drill Mtd on Cat 320N, 1994, 24' mast, Duraquip dust collection . . .$150,000 MISCELLANEOUS (2) Balderson Broom Attachment for Cat IT Machines, 8' wide, good condition . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Ea.

ATTACHMENTS BUCKETS PC1000, 84" Digging Bucket . . . . . .$9,500 Over 100 Excavator, Loader, Specialized & Grapple Buckets in Stock -Call For Your Needs FORKS (8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, excellent . . . . . . . . . . . . . . .$4,000 (5) Cat 936/926/950 pallet forks, for a Balderson quick coupler, exc. cond . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$3,500 Ea. Others Available Call Prices Are Negotiable - At Your Inspection All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.

Page 10 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 11

View us at: www.amstate.com

PAVERS / ROAD WIDENERS MANITOWOC 777 CRAWLER CRANE

KOBELCO CK800 CRAWLER CRANE

CEDAR RAPIDS CR362L - ‘08 • Electric 8-16’ screed, Top Con Syst V, approx 1563 hrs............................................................................$177,500 CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 940 hrs..........................................................................................$299,500 CEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 427 Hrs ........................................................................................$435,900 MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 277 Hrs........$95,000 MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 45 Hrs........$105,500 MIDLAND SPD-8 - ‘11 • RH & LH Discharge Widener to 8’, 340 Hrs............ ......................................................................................................$145,000 CALL items may be on rent causing pricing and hours to vary.

MILLING MACHINES ROTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/470 Hrs ........ ......................................................................................................$349,500 TEREX PR165 - ‘09 • 4 wheel, front loading, w/24” cutter, 511 hrs ............ ......................................................................................................$159,900 WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/150 Hrs .... ......................................................................................................$164,700

ROLLERS SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 217 hrs ............$10,800 SAKAI GW750 - ‘11 • Vibratory Pneumatic, 79’ Wide, 320 Hrs ....$112,500 SAKAI SW300-1 - ‘09 • 39.2" Dbl Drum vib, “on rent”, 250 hrs......$22,500 SAKAI SW320 - '07 • 47" Dbl Drm Vib w/foldable ROPS, 525 hrs ..$16,950 SAKAI SW800II - '09 • 67" Dbl Drm Vib, 1115 hrs..........................$61,500 SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 96 hrs..............................................................................................$95,000 SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW, 500 hrs ................................................................................$87,500

Contact Marty in Illinois 1-800-307-0221 mahrendt@amstate.com

Photos & Detail Descriptions view: www.finkbinerequipment.com

YOUR AUTHORIZED DEALER

in WISCONSIN and UPPER MICHIGAN for: GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS • LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLER CRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/ JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAG CRUSHERS • MANITOWOC CRANES

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT PIONEER CS2148 PORTABLE JAW PLANT, 1997, 21x48 jaw, 50" x 20' vibratory feeder, 48" front discharge conveyor, Cummins diesel, quad axle chassis with hydraulic leveling......................................................................CALL PIONEER 6'X20' 10 DEGREE 3 DECK SCREEN PLANT, 1990, side discharge conveyor, underscreen conveyor, feed conveyor, tandem axle chassis ........................CALL JCI 1400 LS PORTABLE CONE PLANT, 1997, 300 hp electric motor, 48" side discharge conveyor, 42' feed conveyor, motor control panel, tri-axle chassis with hydraulic leveling......................................................................CALL EXCAVATORS DEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8” Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight, 5800 Frame Hours and Recent Engine Rebuild ............................................$125,000 LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel, 33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adn Removable Sideframes, Approx. 190,000 Lb. Working Weight..................................................CALL LIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) with Various Boom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, Hydraulically Removable Counterweights, 124,000 to 130,000 Lb. Working Weights..........CALL

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

CRANES KOBELCO CK800 80 TON CAPACITY CRAWLER CRANE, 1996, with 140’ Main Boom, 30’ Jib, Two Main Hoist Drums Plus an Auxiliary Third Drum, Hydraulically Extended Undercarriage with 36” Track Pads ..................................................................CALL GROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom, 32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work ....................................................................$179,900 GROVE RT875E 75 TON ROUGH TERRAIN CRANE, 2006, 41’ to 128’ boom, 33’ to 56’ bi-fold swingaway, Model 30 main & auxiliary hoists, 29.5 x 25 tires, 3position outriggers ............................................CALL MANITOWOC 777 SII 200 TON CRAWLER CRANE, 2000, Cummins, 220' main boom, 40' fixed jib, third drum, 7200 hours ..............................................CALL MANITOWOC 11000 100 TON CAPACITY CRAWLER CRANE, 2008, (100 Ton capacity @ a 14' radius), with a 332 hp Hino 6 cylinder Tier III diesel, 200' main boom, 60' jib, LMI, 36” crawler shoes, approximate working weight of 218,000 lbs. with 74,970 lb. 5piece counterweight, counterweight and side-frame removal systems. 3020 hours ............................CALL

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Lanny Peterson at:

lpeterson@amstate.com or mobile 1-715-574-8089 or 1-800-242-7113

Page 12 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

AED Holds Annual Summit, CONDEX Show in D.C.

he Associated Equipment Distributors (AED) held its annual Summit & CONDEX show Jan. 18 to 20 in Washington, D.C. Representatives from the industry’s leading dealerships and manufacturers from the United States, Canada and abroad attended the AED convention at the Gaylord

National Resort & Convention Center. Attendees were mostly upbeat about what lies ahead in 2012 as construction employment data continues a modest improvement. see AED page 58

HydrauliCircuit Technology’s Mike Davis (L), sales manager, and Bobby Hudson (C), national sales manager, discuss their product offering with Dale Deweese, national sales manager of Werk-Brau Co., Findlay, Ohio. Attendance improved at this year’s CONDEX show, another indicator of growing confidence in the construction equipment economy.

Mike Chenet (L) of Construction Crane & Tractor, Folcroft, Pa., discusses the outlook for this year’s paving equipment sales with Barry Banks, president of Midland Machinery.

Fred Vilsmeier (L) of Ritchie Bros. and Don Etnyre of E.D. Etnyre, Oregon, Ill., discuss current industry trends.

Gorilla Hammers made its AED debut in an effort to expand its ever growing hydraulic hammer distribution network.

Kevin O’Donnell (L) and Jan Werner of Hydrema introduce equipment dealers to the features of the Hydrema model 922HM all-wheel drive articulated truck.

(L-R): Company Wrench representatives Chuck Sadowski, Michael Gilmartin and Norbert Hammeke are eager to discuss their company’s locations in the Northeast, Midwest and Southeast.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 13

USED EQUIPMENT 1974 CMI SUBURBAN 56-120

2006 CAT 345CL WVG

2008 CAT M322D

2007 CAT 924G

Slipform paver, 12’-24’, CAT 3306 Engine, Float Pan, Hyd. Vibrators, Auto Float.......... ............................................................$34,000

S/N ESD00199, 4010 hours, Reach Boom, 12’10” Stick, Counterweight Removal Device ..........................................$212,000

S/N W2S00283, 1765 hours, A/C, VA Boom, 9’6” Stick, Aux Hyd, 11:00-20 Dual tires ..............................................$197,000

s/n RTA00851, cab, a/c, 2.3yd bucket, Tier ll engine ........................................$115,000

2007 CAT 315CL

2002 CAT 420D IT

2007 CAT 320CL

2007 CAT CS433E

S/N CJC05317, 1900 hours, 10’2” stick, coupler, hammer circuit, a/c ......$115,000

S/N BLN04553, 7300 hours, CAB, A/C, E-Stick, AWD, Ride Control ..........$36,000

S/N PAB07035, 2300 Hrs, quick coupler, mechanical thumb, 42” bucket ..$122,500

S/N ASR00973, floatation tires ....$75,000

2005 CAT 305CR

2006 CAT 246B

2008 CAT 908H

1996 GOMACO GT3600

S/N DGT01147, 2225 hours, a/c, combined function hydraulics........................$30,000

S/N PAT03624, 633 hours, OROPS, Hyd Coupler, Aux Hyd, 70% Tires ........$25,000

s/n MXF00268, 626 hours, cab, a/c, 1.4yd gp bucket, forks ............................$91,500

1515 hours, Molds available ........$60,000

2009 CAT 289C

2007 CAT 307C

2009 Volvo L35B

2010 MORBARK 4600XL

S/N JMP00656, 1141 hours, a/c, standard flow, hyd coupler............................$45,000

S/N BNE01844, 1300 hours, cab, a/c, 5’6” stick ................................................$50,000

4250 hours, A/C, Tires 50%, Good Operating Condition ......................$44,000

400 Hrs, Cat C27 Engine, Auto Reversing Fan, Magnetic End Pully..............$575,000

Rod Byers 636-680-1579 rod.byers@fabickcat.com

1 Fabick Drive, Fenton, MO 63026 www.fabickcat.com “To Ever Serve Our Customers Better”

Bob Miller 636-680-1594 bob.miller@fabickcat.com

Page 14 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt 3200 All Terrain Crane 1:50 Scale $195

Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale............$75 Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200 Allis-Chalmers 45 Motor Grader, 1:50 Scale ..............$100 Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$70 Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70 Bantam Shovel Mounted on a White Truck, 1:50 Scale$95 Bobcat M400 Gold 50th Anniversary Skid Steer Loader, 1:25 Scale ........................................................................$35 Bobcat M610 Golden 50th Anniversary Skid Steer Loader..............................................................................$45 Bobcat S175 Skid Steer Loader, 1:50 Scale ................$25 Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40 Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer Set, 1:50 Scale ................................................................$65 Bobcat 773 50th Anniversary Skid Steer Loader, 1:25 Scale ................................................................................$50 Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$35 Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$90 Case Conrad 580 Super R Backhoe, 1:50 Scale ........$175 Case CX210B Excavator, 1:50 Scale ............................$35 Case 330B Articulated Truck, 1:50 Scale......................$35 Case 621E Wheel Loader, 1:50 Scale............................$35 Case 1850K Dozer, 1:50 Scale ......................................$40 Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale .. ..........................................................................................$65 Caterpillar AP655D Paver, 1:50 Scale ..........................$65 Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale .. ..........................................................................................$50 Caterpillar D6T XW Track-Type Tractor ........................$70 Caterpillar D8R Track Type Tractor, 1:50 Scale............$55 Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$85 Caterpillar 247B Multi-Terrain Loader, 1:32 Scale........$35 Caterpillar 416 Backhoe/Loader, 1:50 Scale ................$75

Poclain 350CK Excavator 1:50 Scale, Conrad $165

JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$85

All New in Box

John Deere 200D LC Excavator ....................................$45 John Deere 624K Wheel Loader, 1:50 Scale ................$45 John Deere 624K Military Wheel Loader, 1:50 Scale ..$35 John Deere 772CH Motor Grader, 1:50 Scale ..............$35

CALL Toll Free

John Deere 850J Crawler Dozer, 1:50 Scale ................$40

800-523-2200

Komatsu D51 EX Dozer, 1:50 Scale ..............................$65 Komatsu D51 PX Dozer, 1:50 Scale ..............................$65

Ext. 197

Komatsu D375 Dozer, 1:50 Scale ..................................$90 Komatsu GD655 Motor Grader, 1:50 Scale ..................$85

Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale .... ..........................................................................................$70 Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $40 Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$75 Caterpillar 785D Mining Truck, 1:50 Scale..................$145 Caterpillar 906H Compact Loader, 1:50 Scale..............$40 Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $45 Caterpillar 950H Wheel Loader, 1:50 Scale ..................$65 Caterpillar 963D Track Loader, 1:50 Scale....................$60 Caterpillar 966A Wheel Loader, 1:50 Scale ..................$65 Caterpillar 977 Traxcavator, 1:50 Scale ........................$60 Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50 Caterpillar 992G Wheel Loader, 1:50 Scale ..................$80 Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$55 Gradall XL4300II Excavator, 1:32 Scale ........................$80 Grove GMK 4115L Truck Crane, 1:50 Scale................$250 Hamm 3307 Compact Roller, 1:34 Scale ......................$60 Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$30 International 175 Crawler Loader w/Multi-Purpose Bucket, 1:50 Scale ..........................................................$65 International TD-24 Military Dozer, 1:50 Scale ............$50 International 350 Payhauler, 1:25 Scale......................$285

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$85 Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50 Scale ................................................................................$85 Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50 Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$235 Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$45 Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$45 Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$65 Komatsu WA470 Wheel Loader, 1:50 Scale..................$75 LBX 210 X2 Excavator, 1:40 Scale ................................$75 Link-Belt 80100 Rough Terrain Crane, 1:50 Scale ....$175 LeTourneau Super C Scraper w/Cab, 1:50 Scale ........$80 LeTourneau Military Super C Scraper, 1:50 Scale ......$50 Northwest 25-D Backhoe, 1:50 Scale ............................$85 Northwest 25-D Shovel, 1:50 Scale ..............................$70 Terex PPM AC40/2L ATC, 1:50 Scale ..........................$190 Terex RT130 RTC, 1:50 Scale ......................................$160 Vogele Super 700 Small Paver, 1:50 Scale ..................$75 Volvo A25D Articulated Truck, 1:50 Scale ....................$75 Volvo BL71 Backhoe Loader, 1:50 Scale ......................$50 Volvo L90E Wheel Loader, 1:50 Scale ..........................$75 Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$85

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 15

LIKE NEW LOADERS AT LESS THAN HALF THE PRICE!!! $78,000 JD 644E tool carrier tractors, Complete factory remanufacture in 2001, Marine Corps contract. Everything was gone through (engines, axles, transmissions, pivots, etc) at that time and the units have very low hours since the remanufacture process. Erb is putting on new paint, new air conditioning units, new 4 yd buckets. Units vary in hours and pricing. Pricing for a unit with less than 2500 hrs, with new paint, air conditioning, hydraulic quick coupler, new bucket and good rubber. $78,000

Fiat 65E, 110HP, Blade Bomag BW205, 84" Pitch, 252 Hrs, #A7104 Drum, #A5331 .............. ........................$110,000 ........................$32,000

JD 310SG, #N4288, Bomag BW180AD, 71" JD 690E, 50’ Long Reach, 32” Pads .......... Cab, Air, Aux Hyd .......... Drum, #A4597 .............. ........................$50,000 ........................$52,000 ........................$38,000

JD 800CLC, 14' 5" Arm, JD 600CLC, 13' 5" Arm, 36" Pads, #N4385 ........ 36" Pads, #U10798 ...... ......................$450,000 ......................$185,000

NPK Hammers, All Sizes for All Makes. Inspected and Well Maintained, GH4-GH18

JD 80C w/ Genesis JD 1050C, Waste GVP7, #N4456 .............. Package, 165" Blade, ......................$100,000 #N4010 ..........$195,000

ERB EQUIPMENT CO., INC. Sales, Rental, Parts & Services Of: John Deere, Bomag, NPK & Trail King

Call Industrial Sales At (636) 349-0200 Toll Free (866) 372-7368 Email: Mattheisel@erbequipment.com

VIEW COMPLETE INVENTORY (OVER 300 UNITS)

8 Locations To Serve You Fenton, MO Wentzville, MO

Mt. Vernon, IL Cape Girardeau, MO

Paducah, KY Cuba, MO

Owensboro, KY Evansville, IN

Page 16 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rudd service can get to those hard-to-reach places. Like the ones that don’t exist yet.

If there’s one thing more hardworking and reliable than Rudd’s equipment, it’s Rudd’s service and maintenance. Rudd’s freight system and 13 service branches across nine states, together with our award-winning master technicians, mean we can deliver replacement parts, equipment and service to your site by the next morning. It’s that kind of 24/7 service that proves how committed Rudd is to going the distance for you. WWW.RUDDEQUIPMENT.COM

Indianapolis, IN Fort Wayne, IN Evansville, IN Pittsburgh, PA

317-247-9125 260-482-3681 812-867-6661 412-741-1731

CALL: 1-877-DIG-RUDD

Clearfield, PA Louisville, KY Corbin, KY

814-765-8500 502-456-4050 606-528-9440

Prestonsburg, KY 606-874-2104 St. Louis, MO 314-487-8925 Charleston, WV 304-755-7788

Cleveland, OH Columbus, OH Cincinnati, OH

614-438-4192 614-438-4192 513-321-7833

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 17

815-968-0818

CONTACT Evenings: Bill 815-262-9134 or Fred 815-975-1419

CAT 325CL 3 YARD HYDRAULIC EXCAVATOR, 188 HP, Cab w/ AC, 10' 6" Stick, 48" Bucket, Bodine Mechanical Thumb, Good UC w/ 32" pads ..................................................$108,000

CAT 320CL 1.83-YARD HYDRAULIC EXCAVATOR, 128 HP, Cab/Heat & AC, Aux Hyds, 9'6" Stick, 44" Bkt w/ Teeth, New Rails & Sprockets, Very Good UC w/ 31.5" Pads ............$115,000

CAT 215DL 1 ¼-YARD HYDRAULIC EXCAVATOR, 125 HP, Cab/Heat, 9'2" Stick w/ 24" Bucket, Auxiliary Hydraulics, Good Undercarriage w/ 28" Pads..............................................$24,500

CAT 939 1 ½-YARD CRAWLER LOADER, 90 HP, Canopy, 3F - 3R Powershift, Pedal Steer, GP Bucket w/ Teeth, Very Good Undercarriage w/ 18" Pads ........................................$28,500

CAT 950G 4 ½-YARD ARTICULATED 4WD LOADER, 180 HP, Cab/Heat, ECPC Trans., GP Bucket w/ Bolt-on Edge, Very Good 23.5 x 25 Tires ....................................................$78,500

BOBCAT S185 RUBBER TIRE SKID STEER LOADER, 56 HP, Canopy, High Flow Auxiliary Hydraulics, GP Bucket w/ Manual Quick Tach, NEW Tires ..........................................$14,500

CAT 950F SERIES II 4-YARD 4WD WHEEL LOADER, 170 HP, Cab Heat, 4F - 4R Powershift, GP Bucket w/ Bolt-on Edge, Very Good Tires ..........................................$62,000

CAT D8R HYDRAULIC SU DOZER W/TILT, 305 HP, Cab/Heat & AC, Powershift Transmission, Differential Steering, Drawbar, Very Good Undercarriage w/26" Pads ................$132,000

CAT D6M LGP HYDRAULIC 6-WAY DOZER, 140 HP, Canopy w/ Sweeps & Screens, Powershift, Fingertip Controls, Allied W5C Winch, Good UC w/ 34" Pads..............$62,500

CAT D3G XL HYDRAULIC 6 WAY DOZER, 77 HP, Cab w/ Heat & AC, Hydrostatic Drive, VG UC w/New S&L Rail Groups, Segments and 16" Single Grouser Pads ..........................$39,500

CATERPILLAR 953C LGP 2 1/4 YARD CRAWLER LOADER, 121 HP, Cab w/AC, GP Bucket w/Teeth, Pilot Hyds, New UC w/ S&L Rails, Idlers, Rollers, & 20" Pads ..................$53,500

CAT 267B CRAWLER SKID STEER LOADER, 71 HP, Canopy, Hydrostatic Drive, Auxiliary Hydraulics, Manual Disconnect, GP Bucket, New 18” Rubber Tracks ......................$25,500

CASE 580 SUPER L 4x4 1-YARD LOADER BACKHOE, 80 HP, Cab/Heat, 4F-4R Shuttle Trans., Extendahoe, Case Control, 18" Bkt w/Teeth, NEW Tires ............................$28,500

CAT D6M XL HYDRAULIC 6-WAY DOZER, 140 HP, Canopy, Fingertip Control Powershift and Steering, Good Undercarriage w/ 24" Pads ...... ............................................................$54,500

2007 FORD F450 XL SINGLE AXLE DUMP TRUCK, 6.0 L Diesel, Automatic Transmission, Side & Behind Cab Tool Box, Electric Hydraulic Lift, Good Tires ..................................$24,000

CAT D6M XL HYDRAULIC 6-WAY DOZER, 140 HP, Cab w/ Heat & AC, Fingertip Control Powershift and Steering, Good Undercarriage w/ 22” Pads ........................................$62,500

For our full inventory, please visit www.adamsequipment.com

Page 18 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Erb Equipment Makes Series of Appointment Changes The Erb Equipment Companies recently announced that its board of directors have made the following appointment changes: Carrie L. Roider has assumed the position of chief executive officer, Gregg R. Erb has assumed the position of president and director of sales, and Robert S. Erb has moved to chairman of the board of directors and as an officer of the company. “I would like to state that we are fortunate and grateful to have Carrie and Gregg step up to assume the duties and responsibilities of their new positions. We look forward to their renewed commitment and leadership to successfully implement to an even greater degree the Three Principles of Working Together improving employee satisfaction and to take advantage of the market opportunities that lie ahead,” said Robert S. Erb. Gregg Erb started with Erb Equipment Company approximately 30 years ago; Roider started with Erb Equipment Company almost 27 years ago. The company vows to continue working towards employee and customer satisfaction. As the third generation continues to lead and manage the company, emphasis will continue to be placed on product support and remarketing services, according to the company.

Gregg R. Erb has assumed the position of president and director of sales and Carrie L. Roider has assumed the position of chief executive officer of Erb Equipment Company.

Adding Experience...

McAllister Equip. Appoints Evans Murphy Tractor Names New as Used Equipment Manager Territory Sales Manager Murphy Tractor & Equipment Company has added Bill Stewart as a territory sales manager at the Cranberry Township, Pa., branch location. Stewart will be responsible for new and used heavy equipment, attachments and trailer sales in southwest Pennsylvania. He has more than four years of experience as a sales representative. For more information, visit www.murphytractor.com.

Richard F. Evans is McAllister Equipment’s new used equipment manager.

McAllister Equipment Co. appointed Richard F. Evans as used equipment manager. Based at the company’s Alsip, Ill., store, Evans will be responsible for purchasing and selling used equipment. Evans has more than 20 years of industry experience. He spent the bulk of his career in sales and management positions with

Ritchie Brothers Auctioneers, where he gained direct sales experience and skills in appraising used equipment. Prior positions included sales and service positions for both on-highway and off-highway dealerships. For more information, call 800/323-8761 or visit www.mcallisterequipment.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 19

(262) 781-3770 Jim King Mobile: (414) 530-0592 13001 W. Silver Spring Drive Butler, WI 53007

SEE PHOTOS

OF OUR

Fax: (262) 781-5053 Email: jking@aring.com

COMPLETE INVENTORY

AT WWW.ARINGEQUIPMENT.COM

2005 VOLVO EC210B LC, Stk #: UEF097; 3,817 Hrs; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Cntl Change $84,000

2001 VOLVO L330D, S/N: 61108; 11,000 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ..................Call

2004 VOLVO L60E, Stk #: UDA367; 5,259 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.2CY Bucket w/BOE ..................................$84,500

2007 VOLVO A40D, S/N: 13747; 3,210 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............ ..........................................$339,000

EXCAVATORS

1996 VOLVO A25C, S/N: 60795; 10,500 Hours; A/C, CONTRONICS, 23.5-25 TIRES .... ..........................................................$89,000 1996 VOLVO A25C, S/N: 60790; 10,500 Hours; A/C, CONTRONICS, 23.5-25 TIRES .... ..........................................................$89,000 1993 VOLVO A25C, S/N: 8072; 12,000 Hours; HEATER. 23R25 TIRES 10%, BODY HEAT, 6X6 ....................................................$59,000 2007 VOLVO A40D, S/N: 13874; 3,491 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............................................$339,000 2006 VOLVO A40D, S/N: 13033; 4,488 Hours ........................................................$279,000 2006 VOLVO A40D, S/N: 13152; 4,441 Hours ........................................................$279,000 2005 VOLVO A40D, S/N: 12171; 3,753 Hours; A/C, CONTRNICS, 29.5R25 TIRES, TAILGATE ........................................................$275,000 2005 VOLVO A40D, S/N: 70051; 6,311 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TAILGATE, BODY HEAT ..........................$259,000 2005 VOLVO A40D, S/N: 12173; 5,312 Hours; AC, CONTRONICS, 29.5R25 TIRES, TAILGATE ........................................................$259,000 2004 VOLVO A40D, S/N: 11341; 3,433 Hours; AC, CONTRONICS, 29.5-25 TIRES (90%), TAILGATE ........................................$285,000 2004 VOLVO A40D, S/N: 11223; 4,790 Hours; A/C, Contronics, 29.5R25 Tires ......$275,000 2004 VOLVO A40D, S/N: 11026; 4,254 Hours; A/C, CONTRNICS, 29.5R25 TIRES ..$269,000 2003 VOLVO A40D, S/N: 10772; 5,834 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$265,000 2003 VOLVO A40D, S/N: 10826; 7,321 Hours; A/C, CONTRNICS, 29.5R25 TIRES ..$199,000

2002 VOLVO A40D, S/N: 60169; 7,465 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$195,000 2002 VOLVO A40D, S/N: 60138; 8,291 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TAILGATE ................................................$185,000 2001 VOLVO A40D, S/N: 60060; 8,180 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$195,000 2001 VOLVO A40D, S/N: 60058; 8,236 Hours; A/C, CONTRNICS, 29.5R25 TIRES ..$169,000 2000 VOLVO A40D, S/N: 10090; 8,801 Hours; A/C, CONTRONICS, 29.5R25 TIRES................ ........................................................$169,000

2005 VOLVO L70E, Stk #: UDI638; 6,271 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.5CY Bucket w/BOE .............. ..........................................................$87,500 2004 VOLVO L70E, Stk #: UFI340; 9,961 Hours; Cab, A/C, Contronics, Hydraulic Attachment Bracket, Front Diff Lock, 2.9cy Bucket, 20.5R25 Tires ......................$73,500 2003 VOLVO L90E, Stk #: UBA183; 8,136 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 3.5CY Bucket w/BOE .............. ..........................................................$99,000 2005 VOLVO L110E, Stk #: UJJI424; 3,540 Hours; Cab, A/C, Hyd Attachment Bracket, 23.5R25 Tires, 4.1CY Bucket w/BOE$127,500 2010 VOLVO L110F, 447 Hours; Cab, A/C, Radio w/CD, Boom Susp, 3rd Function, Block Heater, 4.4cy Bucket, 23.5R25 Tires .............. ........................................................$212,500 2005 VOLVO L220E, Stk #: UBF297; 16,656 Hours; Cab, A/C, Radio, Return to Dig, Boom Susp, 7cy Bucket w/BOE, 29.5R25 Tires, Recent Transmission ......................$109,000 1999 VOLVO L330C, S/N: 60392; 22,268 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ........................................Call 1996 VOLVO L330C, S/N: 60125; 22,031 Hours; Cab, A/C, Contronics, Boom Susp, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires..........................................................Call 2001 VOLVO L330D, S/N: 61108; 11,000 Hours; Cab, A/C, Contronics, Boom Susp, CDC, 9CY Spade Nose Bucket w/Teeth, 35/65R33 Tires ........................................Call

2005 VOLVO EC210B LC, Stk #: UEF097; 3,817 Hours; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Q/C Piping, Rotator Piping, Pilot Pattern Control Change......................$84,000 2003 VOLVO EC210B LC, S/N: 843; 8,356 Hours; A/C, Radio, 32" Pads, 9'6" Stick, Aux Hyd, Geith Pin Grabber, 48" Bucket ..........Call 2004 VOLVO EC360B LC, Stk #: UBF800; 4,702 Hours; A/C, 36" pds, 12'10" stck, Aux hyd, Q/C piping, Pilot pat cntrl ................Call 2003 VOLVO EC360B LC, Stk #: UJJ616; 5,509 Hours; 12' 10"' ARM; AC; RADIO; 36" PADS; 70% UC; 54" P/O BUCKET; PILOT PATTERN CONTROL CHANGE ........................Call 2003 VOLVO EC460B LC, Stk #: UJGF433; 3,472 Hours; A/C, Radio, 36" Pads, 15'9" Stick, Pilot Pattern Control Change, Aux Hyd, 66" Bucket........................................$179,500

GENERATOR SETS VOLVO 320 KW, S/N: 2012638315; 320 KW .. ................................................................Call 2006 VOLVO 500 KW, For Sale or Rent. Call Denny or Brek for price & details. Skid Unit .. ................................................................Call 2006 VOLVO 500 KW, S/N: 021732; 7,588 Hours; Volvo 500 kw in a trailer ..............Call 2005 VOLVO 500 KW, S/N: 021732; For Sale or Rent. Call Denny or Brek for price & details. Skid Unit ......................................Call

OFF HIGHWAY TRUCKS 2007 VOLVO A40D, S/N: 13747; 3,210 Hours; A/C, CONTRONICS, 29.5R25 TIRES, TEFLON LINERS ............................................$339,000

WHEEL LOADERS 2004 VOLVO L60E, Stk #: UDA367; 5,259 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.2CY Bucket w/BOE .............. ..........................................................$84,500 2004 VOLVO L60E, Stk #: UDH430; 7,451 Hours; Cab, A/C, Hyd Attachment Bracket, New 20.5R25 Tires, 2.2CY Bucket w/BOE ...... ..........................................................$84,500 2002 VOLVO L70D, Stk #: UDG937; 1,907 Hours; Cab, Contronics, Boom Susp, Hyd Attachment Bracket, Limited Slip Diff, 2.5cy Bucket, 20.5-25 Tires ........................$89,500 2002 VOLVO L70D, Stk #: UFF989; 10,497 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5-25 Tires, 2.5CY Bucket w/BOE................ ..........................................................$67,500 2005 VOLVO L70E, Stk #: UBG916; 2,320 Hours; Cab, A/C, Hyd Attachment Bracket, 20.5R25 Tires, 2.5CY Bucket w/BOE .............. ..........................................................$99,000

WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.

Page 20 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

llu.net www.a

scan for video

ALLU D-SERIES

Screener Crushers & Fine Screeners ALLU provides portable screening and crushing attachments that will crush, mix, stabilize, aerate and screen for pipelines, topsoil, compost, construction debris, contaminated soils, asphalt, mulch, salt, coal, sand, gravel, sludge, garbage, bio-waste, food waste, leaf mulch, glass, gypsum, pallets, lime & much more!

• High production even with wet muddy materials • 5/8” & 1” Fine screening size • 1-1/4” and up sizes with replaceable hammers

ALLU Group, Inc. | Info Call: 1-800-939-2558 | Email: usa@allu.net

Satisfaction Guaranteed! SEAL SAVER PROTECTIVE CYLINDER COVER

KOMATSU D65EX-15

Made in the USA

Tough economic times call for a preventive approach to equipment maintenance. Extend your maintenance budget and the life of your cylinders with the SEAL SAVER protective cylinder cover. Resistant to heat, oil, chemicals and water, the SEAL SAVER will help protect seals and cylinder rods from premature failure. This unique preventive maintenance tool attaches easily and securely to the rod and cylinder head – usually in fifteen minutes or less – with no disassembly of the cylinder required.

The SEAL SAVER WILL: Protect cylinders from the elements • Eliminate dings and dents from falling debris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the life of cylinder seals • Eliminate rod scoring

STOP the never ending cycle of cylinder repairs. SEAL SAVER has proven effective in Construction, Mining, Waste Management, Quarries, Refineries, Marinas, Recycling and Wood Products industries. Exclusively manufactured by:

Fluid Control Services, Inc. 1155 Allgood Road • Suite 15 • Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

www.sealsaver.com

Visit for more information or contact us at 1-800-683-5189

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 21

The Difference is in the D-tails.

• EFI Engine with Auto Idle

Engine Power 47.1 kW (63 hp) @ 2,300 rpm

• Sealed and Pressurized Cab

Bucket Breakout Force 2327 kg (5,125 lb.) Tipping Load 1816 kg (4,000 lb.)

• Switchable Joystick Controls • Cushioned Boom Cylinders

SAE Rated Operating Cap. 908 kg (2,000 lb.)

**0.0% Financing for 42 Months. ** Offer ends 03/31/12. Subject to approved credit on John Deere Financial Installment Plan, for commercial use only. Prior purchases are not eligible. Available at participating dealers. Some restrictions apply. See your dealer for complete details and other financing options.

RDO Equipment Co. Burnsville, MN Matt Dull 952-890-8880 • mdull@rdoequipment.com

Scharber & Sons Rogers, MN Randy Thorstad 612-840-3464

Isanti County Equipment Isanti, MN Jesse Kraft 763-444-8873

www.mnequipmentsolutions.com

Page 22 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Vander Haags,Inc. ’

563-872-4112

'8%848( %(//(98( ,2:$

::: --6&+(&.(/ &20

Since 1939

866-634-5030

www.vanderhaags.com

Truck & Trailer Sales

CUSTOM REBUILD DIVISION TOP QUALITY, non-union, independent EMPLOYEES that care deeply for our customers, working in a TOP QUALITY FACILITY in Iowa, equals TOP QUALITY EFFICIENCY! &203/(7( 0$&+,1( Custom Rebuilds, Remans & Repowers ,1',9,'8$/ &20321(17 Rebuilds & Repairs 2(0 35,9$7( /$%(/ Contract Remanufacturing, Rebuilding & Mechanical Service

We carry all the names you trust!

Please contact Josh Scheckel for any of your service requirements, call 563-872-4112, or email JOSH@JJSCHECKEL.COM

CAT D10R REMAN

(2) CAT D9R REMANS

(48,30(17 5(17$/ $1' 6$/(6 ',9,6,21 1996 CAT D5H LGP Here is a nice one!........... SOLD!! 75$&. 7<3( 75$&7256 97/2012 CAT D11R Complete Reman.............. CALL!! 1986 CAT D5H LGP Priced to Sell!.................. SOLD!! 97/2012 CAT D10R Complete Reman............ CALL!! 2005 DEERE 650J LGP Only 4,900 hrs......... $51,000 97/2012 CAT D9R Complete Reman................ CALL!! &203$&7,21 ',57 35(3 2002 CAT D11R Coming In! .............................CALL!! (9) 48” & 60” SHEEPSFOOT........... $4,500-$18,500 $468,000 1999 CAT D10R Full Specs, New UC............ (2) 2009 HOLMES ROLLERBLADES.......$19,000 EA 1996 CAT D10R Coming In! .............................CALL!! (3) ROME OFFSET DISKS............. $12,500-$19,000 2006 CAT D9T Full Specs, New UC.............. $445,000 27+(5 (48,30(17 2002 CAT D9R Full Specs, New UC..............$255,000 2001 CAT D9R Full Specs, New UC..............$235,000 1981 GROVE RT 740 CRANE ...................... $88,000 1999 CAT D9R 100% UC, Full Specs............$265,000 2007 CAT 320DL Low Hours!..................... $139,000 1990 CAT D9N Low hrs on Power Train.......$124,000 2006 CAT TH580B TELEHANDLER..............$56,000 1997 CAT D6R XW Priced to Sell!.................... SOLD!! 2006 CAT TH460B TELEHANDLER..............$45,000 1998 CAT D6R LGP Full Specs.................... $105,000 (2) 2005 NOBLE 417B SCRAPERS.........$35,000 EA (2) 1995 CAT D6H’S Coming In! ...................... CALL!! (4) 2007 MISKIN DW25’S..................... $75,000 EA CALL!! 2004 CAT D6N XL Coming In! .......................... CALL!! ATTACHMENTS, RIPPERS, BLADES...............CALL!! For equipment rental and sales call 563-872-4112, or email SALES@JJSCHECKEL.COM

CAT D11R REMAN Transport and Financing available. Detailed pictures/descriptions at ::: --6&+(&.(/ &20

Parts & Equipment Sales

Service & Equipment Installation 1999 CAT D9R, FULL SPECS 100% NEW UC! $265,000

5 Locations to serve you in Spencer, Des Moines & Council Bluffs, IA & Sioux Falls, SD

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 23

Page 24 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The race to the finish is shorter than ever. They say speed kills. But for grading, speed and accuracy win. You win more jobs, you beat more deadlines. Topcon 3D-MC2 revolutionized dozer grading performance. Now available for motor graders, your high-precision blade is super charged to give you speed and accuracy that can more than double your productivity.

TWICE AS FAST, TWICE AS ACCURATE

It’s not just for dozers anymore.

topconpositioning.com/seeforyourself

www.smallstep.gov

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 4, 2012 â&#x20AC;˘ Page 25

Â&#x160;Â&#x2022;Â&#x2022;Čą Â&#x2DC;Â&#x17E;Â? Call DougČąČŚ/Čą Â&#x160;Â&#x;Â&#x17D;ÇąČąČą Sam: (866) 485-7180

2007 Komatsu D65EX-15; #81435, Cab/AC, Sweeps, Rear & Side Screens, 1700 Hrs............ ............................................................$179,500

Finn T60; #81550, 25hp Kohler Engine, 600 Gallon Tank, 800 Hrs ............................$17,500

2007 Komatsu WA250-5; #81402, Cab/AC, QC/3 Yd Bkt, 3rd Valve, 3100 Hrs ......$109,500

1999 Volvo A40; #91495, 40 Ton Truck, Rebuilt Transmission ........................................$79,500

2000 Cat IT38G; #81555, QC/Bkt/48â&#x20AC;? Forks, 3rd Valve, 10,400 Hrs..................................$59,500

2003 Komatsu D65PX-15; #80775, Cab/AC, 36â&#x20AC;? Shoes, Drawbar, 5400 Hrs............$129,500

2006 Cat 953C LGP; #81423, Cab/AC, GP Bkt w/Teeth, 2100 Hrs ..............................$119,500

1993 Komatsu PC300LC-5; #91561, 33.5â&#x20AC;? Tracks, 13â&#x20AC;&#x2122; Arm, JRB QC ......................$51,000

2005 Komatsu PC228USLC-3; #81385, Cab/AC, Aux Hyd, 2475 Hrs..............................$129,500

2005 Deere 410G; #81583, Cab/AC, Ext-A-Hoe, Aux Hyd, 900 Hrs..................................$67,500

2007 Komatsu D39PX-21; #81560, A/C, 25â&#x20AC;? Shoes, Sweeps/Rear Screen, 3350 Hrs $59,500

2002 Komatsu CD60R-1; #81226, Roadliner Tracks, 2600 Hrs ..................................$79,500

Page 26 • February 4, 2012 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

YOUR DIRECT LINK

to the Largest Manufacturers of High Quality

UNDERCARRIAGE!

All Makes & Models Heavy Equipment Complete Undercarriage Systems Track Chains and Groups, Sprockets, Segments,Track Shoes, Idlers, Rollers. Full Warranty. Nationwide direct same-day shipping or installation at our facility.

We will not be Undersold by Anyone on Any Product of Comparable Quality! Call Today for a Quote!

563.872.4112

PH:: 563.872.4112 | FAX: FAX:: 563.872.5058 58 | PARTS@JJSCHECKEL.COM P PAR AR RTS@JJSCHECKEL.COM

21582 HWY 62,, BELLEVUE,, IOWA IOWA | WWW.JJSCHECKEL.COM WWW W.JJSCHECKEL.COM

Making a Switch...

Cat Lift Trucks Launches Electric Conversion Guide AUTHORIZED OEM DEALER Hitachi Excavators Hitachi Trucks Kawasaki Gehl Euclid Talbert Protec Waldon Perkins Hensley

Bucyrus Blades Cummins Baldwin Filters Expander Systems Allied/Rammer Esco Isuzu Hino Sennebogen Moxy

YOUR PARTS SOURCE Dresser (new & non-OEM) Galion (new & non-OEM) Wabco Michigan Samsung IH Cat (non-OEM) Remanufactured Components ...plus many others

Visit our website: www.howelltractor.com 2770 May Road Peru, Ill 61354 800-342-6072 Fax: 815-224-2538

480 Blain Street Gary, IN 46406 800-852-8816 Fax: 219-977-4220

In response to the material handling industry’s shift toward electric lift trucks, Cat Lift Trucks has released several resources to help warehouse professionals understand the benefits of electric lift trucks, including a white paper that outlines the advantages of electric alternating current (AC) over internal combustion (IC) lift truck technology. The white paper, titled “Choosing Electric Lift Trucks over Internal Combustion,” explains the benefits of electric lift trucks, including reduced emissions, reduced operating costs and increased productivity and performance levels. The white paper also details why material handling professionals should consider the total cost of ownership rather than initial cost when purchasing lift trucks, and provides a benefits comparison chart of gas, diesel and electric technologies. “We want to help our customers make the best-informed and most cost-effective deci-

sion when choosing a lift truck for their specific application,” said Carl Modesette, product marketing specialist of Cat Lift Trucks. “Often times, electric lift trucks may seem more expensive due to the initial upfront costs, but in reality, they are becoming an economical solution for a growing number of our customers.” In conjunction with the white paper, Cat Lift Trucks has launched the “Power Redefined Dictionary,” a guide to help users understand frequently-used electric forklift terminology. The dictionary can be found with the AC vs. IC lift truck white paper and the recently launched Lift Truck Cost Comparison Tool, a free web resource that helps customers evaluate the cost savings between AC and IC lift trucks, at www.savewithelectrics.com. For more information, call 800/CAT-LIFT or visit www. cat-lift.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 27

Page 28 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Looking to the Future Is Prevailing Theme at MITA Annual Conference

he Michigan Infrastructure & Transportation Association (MITA) held its annual conference and trade show Jan. 19 to 21 at Soaring Eagle Casino & Resort in Mount Pleasant, Mich. As a state wide association focused on Michigan’s road and bridge, sewer and water, utility, railroad, excavation and specialty construction, MITA IronPlanet’s Mark Domeier (L) and Michael Shane represents nearly 600 Michigan companies throughout the share insights on converting excess fleet inventories state. into gold. The theme for this year’s event was “The Road Ahead – Surviving or Thriving in Michigan.” Keynote speaker, Timothy Galarnyk, host of the History Channel’s “Inspector America,” offered insights gained from more than 35 years of experience as an infrastructure safety inspector. Breakout sessions were conducted over the course of the three-day event, including MDOT Focus Groups, a MIOSHA activity report and conferences focused on topics such as the dynamics of health care reform and innovations (L-R): Mike Schuyler, Adam Harding and Matt Rinckey to ease contract management. of CRC, the equipment rental division of AIS, greet Major event sponsors included AIS Construction attendees at their booth. Equipment, ALTA Equipment Company and Michigan CAT. (L-R): Ryan Wurtzel, Tom Raska and Ray Henwood discuss equipment solutions at the Carleton Equipment booth ranging from big, with their Doosan line, to small, with their Bobcat line.

Southeastern Equipment Company’s Mike Zalewski (L) catches up with Mark Geib, engineer of operations field services of Michigan’s Department of Transportation.

Kevin Boyd (L) and Vince Voetberg of Jeffers Crane Service had their hands full discussing crane equipment with attendees. Jesse Radke (L) of Cougar Sales talks with Ritchie Bros.’ Steve Gorman about several of Ritchie Bros.’ upcoming sales, including its big annual sale in Orlando, Fla.

Mike Ross of Efficiency Production is on hand to discuss trenching and shoring with show attendees.

Michigan CAT’s Clay Cutchins (L) and Allen Broskey are happy to talk about Caterpillar equipment.

(L-R): Pro-Tec Equipment’s Dave Miedema, Paul Rosemech and Joe Cook talk about trench safety with attendees.

Attachments

SECTION

Pages 29-31

‘Stumpiranha’ Delivers Complete Stump Removal The “Stumpiranha” from Leading Edge Attachments Inc. is a stump removal tool that replaces the slow process of stump grinding, and allows for complete removal without leaving grindings or stump remains that can cause sinkholes later. Stump grinders are expensive, slow, and tap into the hydraulics of a machine, which can introduce contaminants in the excavator’s complex hydraulic system. The Stumpiranha attaches to an excavator or backhoe similar to a bucket, and allows the stump to be cut and ripped under the stump from the roots. The staggered sharp pointed blades cut the roots under the stump one pointed blade at a time, thus allowing the maximum cutting force to be achieved, according to the manufacturer. The vertical arms of the tool straddle the stump while the blades rip the roots below, thus allowing the stump to be removed completely, only leaving the ends of the roots. The stump can then be scooped up and loaded into a truck, without leaving insect infested grindings at the site. The Stumpiranha is manufactured in the United States using high strength T1 alloy steel for abusive, abrasive and cold weather conditions. The price for a 20 ton excavator model currently is $8,690. For more information, visit www.stumpiranha.com.

The Stumpiranha attaches to an excavator or backhoe similar to a bucket, and allows the stump to be cut and ripped under the stump from the roots.

Case Introduces Excavator Digging System Components Case Construction Equipment’s smart digging systems components, include new pin-on buckets, coupler buckets, the Case multi-fit coupler and the SmartFit bucket teeth system. Case pin-on buckets are designed for heavy-duty, high-capacity applications such as digging in dense soil, clay, loose rock and gravel. Available models include: • Heavy-duty buckets with a rugged cutting edge and durable horizontal wear strip • Severe-duty buckets featuring rugged T1 or AR400 steel in all high-wear areas, along with double bottom and horizontal wear strips and thicker edges for improved durability and strength • Heavy-duty, high-capacity buckets with 20-percent higher capacity than standard, plus the heavy-duty design features of the other buckets • Ditching buckets with a formed back wrapper for enhanced loadability and production along with tapered sidewalls for easier dumping of sticky material.

The Case multi-fit coupler plete fills. offers complete hydraulic latchCase SmartFit bucket teeth are ing, enabling excavator operators now factory-installed, standard to quickly attach and detach equipment on Case buckets purbuckets and other components chased with all full-sized and without leaving the cab. A mid-range excavators. mechanical blocking system Customers also may purchase eliminates manual safety pin additional SmartFit equipped insertion. Case buckets, or upgrade older The universal design of the model buckets, at Case coupler enables Case excavators Construction Equipment dealerto connect a wide range of Case ships. and other OEM buckets and The SmartFit system provides attachments within the same size stronger, more durable teeth and class. A hydraulic check valve adapters, and hammerless, and mechanical blocking bar reusable locking pins. SmartFit help prevent the accidental bucket teeth are available in a release of an attachment. Case Smart Digging Systems components include new pin-on variety of configurations to fit a Designed for the multi-fit cou- buckets, coupler buckets, the Case multi-fit coupler and the full range of buckets. The pler, Case coupler buckets fea- SmartFit bucket teeth system. SmartFit lineup includes general ture integrated bucket pins to prepurpose, rock chisel, heavy penevent any loss of breakout force that might the coupler buckets work in either the back- trator, tiger, twin tiger and flare teeth. otherwise occur when using a coupler hoe or face positions for optimum versatility. For more information, call 866/54CASE6 device. Available in a wide range of sizes, Their design results in quicker, more com- or visit www.casece.com.

Page 30 • February 4, 2012 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide

Bradco Stump Grinder Eliminates Stumps Below Ground The Bradco stump grinder by Paladin Construction Group attaches to skid steers for landscaping, construction and maintenance stump removal needs. Choose from cutting depths up to 10- or 12-in. (25 or 30 cm) below ground with a multi-directional tooth pattern that permits cutting from side-to-side and vertically. Optional square-threaded single-bolt teeth or shark style universal bolt-on teeth are available. Both standard-flow and high-flow models have heavyduty gearbox drives with torque arm motor support for longer motor and drive system life. The offset design offers enhanced visibility and can be used in tight spaces around buildings, homes, trees and other obstacles. The built-in grouser pads provide cutting stability and grip for uneven ground and hill sides, according to the manufacturer. The Bradco stump grinder provides a 60-degree swing arc geometry and can cover 45 in. (114 cm) in a single sweep. An adjustable speed control allows the operator to adjust the speed of the swing and lift functions to achieve maximum performance. Easy access to all drive components allows for quick maintenance while the quick attach mounting plate allows for easy hook-up and disconnect. The SG26 standard-flow model requires 14 to 22 gpm (53 to 83 Lpm) and has a 26in. (66 cm) diameter cutting wheel, allowing for up to 10in. cutting depths. The SG30 high-flow model requires 29 to 44 gpm (110 to 166 Lpm) and has a 30-in. (76 cm) diameter cutting wheel, allowing for up to 12-in. cutting depths. For more information, call 800/456-7100 or visit www.paladinconstructiongroup.com.

The Bradco stump grinder provides a 60-degree swing arc geometry and can cover 45 in. (114 cm) in a single sweep.

Enhancing Functions...

Genesis Attachments Receives Indexator Universal Ditching ISO 9001:2008 Certification Bucket Designed for Efficiency

Indexator’s universal ditching bucket is designed to make digging, backfilling, and leveling or contoring with Rototilt more efficient. The back corners of the bucket are tapered back to enhance the Rotate and Tilt functions of the Rototilt attachment. Indexator offers these universal ditching buckets in sizes from .32 to 1.62 cu. yd. (.2 to 1.2 cu m) capacity to cover the five models of Rototilts for excavators from 3 to 30 ton (2.7 to 27 t) capacity. For more information, call 519/754-2195 or visit www.indexator.us.

Genesis Attachments has received its certification to ISO 9001:2008 standards. ISO 9001:2008 Certification, the culmination of an effort that began in 2010, was awarded by the National Standards Foundation. This achievement marks the latest milestone in Genesis’ ongoing focus to improve operations by employing the latest manufacturing, management and standardized service techniques, according to Mats Ceder, Genesis general manager. “Genesis was founded on a belief that excellence in manufacturing backed by good customer service is at the root of any successful endeavor,” he said. “This certification both underscores and formalizes that commitment. The entire Genesis team has embraced the push for ISO certification and worked hard to make it happen. In recent years, we’ve become real proponents of Lean Manufacturing methodology as well as the A3 standardized approach to problem solving. “This certification is a great accomplish-

ment for everyone at Genesis and will provide direct quality- and service-based benefits for our customers.” The ISO 9001:2008 standard is a set of quality practices that ensures the use of effective internal processes that are consistently monitored and continually improved. The end result is a better product, whether service-based or manufactured goods. Genesis’ accreditation is itself part of a larger division-wide initiative by parent company Paladin Brands. “There’s no denying the value these techniques have in terms of improving and standardizing processes, reducing waste and making our company better equipped to compete in this new economy,” said Ceder. Genesis Attachments, based in Superior, Wis., is a global leader in the design and manufacture of excavator attachments for the scrap processing, demolition and material handling industries. For more information, call 715/395-5252 or visit www.genesisattachments.com.

Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • February 4, 2012 • Page 31

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

Multi-ply Your Money! with the excavator rock ripping

Multi-Ripper or the Multi-Ripper Bucket

FETCH THIS PAPER YOURSELF

Multi-Ripper Bucket

Multi-Ripper Multi-Ripper

Hi-Cap Multi-Ripper Bucket

Rip the Rock instead of Blasting or Hammering

Maximize force 6 to 9 times the force one tooth at a time, of a standard 5 tooth bucket using our patented 4 times faster than a hammer "Shanks on an Arc" Rips the sides and bottom of the technology. trench flat, with no depth limitation "the greatest Celebrating our 10th Year advancement I have seen Designing Innovative Products for excavating rock!" Made In USA! Ronnie Lewis, Lewis Contractors, Inc.

eading "Leader in Excavator Rock Ripping Attachments" dge visit: www.digrock.com ttachments, e-mail: sales@leattach.com Inc. ®

small step no. 34

call to order: 866-928-5800 or 508-829-4855

TAKE A SMALL STEP TO GET HEALTHY www.smallstep.gov

Page 32 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The parts you need in 48 hours or less. Guaranteed. If you’re waiting for machine-critical parts, you’re losing money—so Doosan is doing something about it. We’ll ship any machine debilitating part in 48 hours or less. If for some reason we can’t, we’ll pay for a rental. It’s as simple as that. DOOSAN DELIVERS: PARTS The 48-Hour Parts Guarantee is subject to carrier delivery restrictions and / or governmental agency delays.

Contact yo your local Doosan dealer for more information. Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2012 Doosan Infracore Construction Equipment America. All rights reserved. | 0112381

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 33

Authorized Doosan Dealers

ILLINOIS Luby Equipment Quincy 217-222-5454 www.lubyequipment.com

INDIANA Ronson Equipment Co, LLC Lowell

šŠŨǍťŨťǍŤťŧş ì ŧťťǍŢŤşǍŤŤŢŧ WWW.RONSONEQUIPMENT.COM

KANSAS Sellers Equipment, Inc. Wichita

ŢŠťǍŨţŢǍŨŢŠŠ WWW.SELLERSEQUIPMENT.COM

MINNESOTA Lano Equipment, Inc. Shakopee

ŨŤšǍţţŤǍťŢŠş ì ŧŦŦǍŦŤŢǍťŠşş

Anoka

ŦťŢǍŢšŢǍŠŦšş ì ŧŧŧǍţţŧǍŤšťť www.lanoequip.com

MISSOURI Luby Equipment Cape Girardeau

ŤŦŢǍŢŢţǍŨŨŢŦ www.lubyequipment.com

NORTH DAKOTA Bobcat of Grand Forks Grand Forks 701-772-5006 www.bobcatofgrandforks.com

Bobcat of Devils Lake Devils Lake

ŦşŠǍťťšǍŤŢŢŠ www.bobcatofdevilslake.com

Bobcat of Williston Williston 701-572-5050 www.bobcatofwilliston.com

SOUTH DAKOTA Diesel Machinery Inc. Sioux Falls

ťşŤǍŢŢťǍşţŠŠ ì ŧşşǍţŤťǍţşşŤ

Rapid City

ťşŤǍŢţŧǍŦţŢŧ ì ŧşşǍťŤŧǍŢşţŦ

Aberdeen

ťşŤǍŦšŤǍţŢťţ ì ŧşşǍŦťšǍťŢŠš www.dieselmachinery.com

LiuGong Acquires HSW, Dressta Co. LiuGong Machinery Corp., a global construction equipment manufacturer based in Liuzhou, China, has finalized its agreement to acquire HSW (Huta Stalowa Wola) and its distribution subsidiary, Dressta Co. Ltd., company executives announced. The agreement was signed by both companies’ executives in Warsaw with celebration ceremonies following at the Baranów Sandomierski Castle in Baranów Sandomierski, Poland. David Beatenbough, currently vice president of research and development of LiuGong, has been named chairman of the board of the new entity, LiuGong Machinery (Poland) sp z o.o. The transaction is LiuGong’s first outright acquisition outside its domestic market. HSW is a producer of bulldozers and other crawler machines. It is one of only seven manufacturers worldwide producing a complete line of bulldozers, from 74 to 520 hp (55 to 387 kW). The Polish government was the primary owner of HSW. It agreed in principle to sell to LiuGong earlier this year with the signing of a preliminary enterprise acquisition agreement in Beijing, China. The formal contract ceremonies set at a prominent castle and landmark in Poland reflected the importance of the transaction for both the companies and the two countries. The events, a signing ceremony and press conference, followed by a full banquet, and tours of HSW facilities a day later, were attended by high level government officials of both Poland and China. Presiding dignitaries included Poland’s Minister of Treasury, Mikołaj Budzanowski; Chairman of the Poland Industrial Development Agency, Wojciech Dąbrowski; Sun Yuxi, the Chinese ambassador to Poland; Wang Xiaohua, chairman of the board of Guangxi LiuGong Machinery Co. Ltd and Guangxi LiuGong Group Co. Ltd.; Zeng Guang’an, vice chairman and president of Guangxi LiuGong Co. Ltd. and Krzysztof Trofiniak, chairman of the board and general director of HSW. “I’m pleased to be a part of this historic occasion bringing two great companies, and two great brands together,” said Zeng Guang’an. “This deal further solidifies the strong ties between our two countries, as Poland and China are long term trading partners and we have more than 60 years of excellent relations. This agreement signals a new era of expansion for both LiuGong and HSW. HSW Chairman Krzysztof Trofiniak said the new partnership is the right move for both companies, leveraging Chinese efficiency and European technology. After announcing its intent to acquire HSW last March, negotiations for the agreement continued during the summer and fall, as LiuGong reached agreement regarding wages and job security with the Polish Workers Union and completed the commercial terms of the transaction with HSW. “Our gaining and retaining the technical knowledge and skills of the HSW employees was important to us in this agreement,” said Beatenbough. “It is still important for us to remain competitive in our markets, and this agreement lets us do that.” LiuGong’s acquisition of HSW represents a smart strategic step for the company, which has a publically stated goal of becoming a top 10 construction equipment manufacturer by 2015. In the transaction, LiuGong obtains core technologies that will help it advance some of its product designs; supplements LiuGong’s product lines; provides a manufacturing and logistic footprint in Europe; and expands LiuGong’s penetration into markets and products segments. LiuGong already offers a full line of machines to world markets. LiuGong has among the most expansive array of product lines of any Chinese manufacturer, including wheel loaders, bulldozers, skid steers, forklifts, motorgraders, excavators, rollers, drilling machines, truck mounted and crawler cranes, pavers, cold planners, concrete equipment and mining dump

trucks. The company, routinely ranked as the largest wheel loader manufacturer in the world, is also among the world’s fastest growing CE firms. The company sold 75,000 machines in 2011 and has posted an average of 40 percent annual revenue growth for the past six years running in overseas markets. It is ranked among the world’s top 20 machine manufacturers. As a leading exporter of machines from China, LiuGong has one of the largest global dealer networks of any of its Chinese competitors. The network consists of nearly 280 dealers in more than 95 countries, and is backed by nine subsidiary offices and 10 parts depots that deliver items within 48 hours. LiuGong runs 22 manufacturing plants in China, and one in India that adhere to Six Sigma quality methods. HSW will bring that count to 24. LiuGong supports a world class R&D function, and has a team of more than 13,000 employees, including more than 750 engineers, standing behind every machine it makes. The company’s full contact relationship with its customers and its markets lets LiuGong share knowhow for today’s projects while anticipating needs for tomorrow’s jobs. HSW was established in 1937 and is known for manufacturing crawler dozers at its plant in the Podkarpackie province in southwestern Poland. HSW also produces wheel loaders, loggers, pipe layers, conveyer belt shifters, motorgraders and machines customized for landfill applications, also for global markets. David Beatenbough, one of the key architects of the acquisition, discussed how HSW will fit into LiuGong’s plans and product lines. “We will acquire proven technology within the bulldozer segment, as we will now own all the technology and designs, including undercarriages and driveline components,” Beatenbough said. “HSW machines have a long and respected design history reaching back to International Harvester, which was an early developer for the track-type undercarriages that presaged construction equipment as we know it today.” He said LiuGong will benefit from HSW’s experience with large model machines. Beatenbough noted LiuGong also will benefit from HSW’s plant location in central Europe, closer to its European customers, without undertaking a long, expensive construction project. In addition, he said, LiuGong will gain HSW Dressta’s distributor and dealer network, which is largely complementary to LiuGong’s global dealer network. With the transaction now complete, LiuGong will move rapidly to integrate processes and production. A talent exchange will bring Chinese engineers to Poland and send Polish engineers to China for training. The first fast-track project will be an investment into production line equipment and re-tooling at the Podkarpackie plant, enabling it to produce LiuGong excavators and wheel loaders as quickly as possible. Though unable to provide specifics, Beatenbough said the plant is expected to increase its overall production capacity, which in turn, will increase its purchasing requirements for raw materials. Work on this begins immediately. “It’s important to note that we will be a part of the community in Poland,” Beatenbough said. “We will be a contributor to the economy and a partner in the community. As markets grow, we will continue to expand there.” LiuGong will move rapidly to leverage the combined distribution network to bring the expanded product line to dealers — HSW products to LiuGong dealers and LiuGong products to HSW/Dressta dealers. Relative to brand names, Beatenbough said, for the near term all three brands will be retained in certain markets.

Page 34 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

POWER

RAW

STAR EQUIPMENT LTD. 1401 2ND AVENUE DES MOINES, IA 50314 (515) 283-2215 FAX: (515) 283-0295 (800) 369-2215

WY. 2625 W. AIRLINE HDealer WATERLOO, IA 50703 (319) 236-6830 FAX: (319) 236-6834 (800) 791-9249

2950 6TH STREET SW Imprint

CEDAR RAPIDS, IA 52404 (319) 365-5139 FAX: (319) 365-6726 (800) 728-5139

mustangmfg.com

2100 E. LINCOLN WAY AMES, IA 50010 (515) 233-9500 FAX: (515) 233-9505 (866) 856-2312

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 35

RTL Equipment Inc. 3000 SE Gateway Drive Grimes, IA 50111 515-986-0262 Fax: 515-986-0267 2601 120th St. NW Swisher, IA 52338 319-857-4045 Fax: 928-441-1269

Custom Truck & Equipment Tough and rugged, the Terex® RT 130 is the crane of choice for the most demanding rough terrain applications.

7701 Highway 24 Kansas City, MO 64125 800-861-1065 www.cte-equipment.com

Other Terex® Cranes Products:

Telescopic Truck Cranes Boom Trucks All Terrain Cranes Crawler Cranes Lattice Boom Truck Cranes Tower Cranes Rough Terrain Cranes

Terex Cranes Waverly Waverly, IA Tel 319 352 3920 • Fax 319-352-5727 www.terex-cranes.com inquire@terexwaverly.com © 2008 Terex Corporation • Terex is a registered trademark of Terex Corporation in the United States of America and many other countries.

For Your Local Terex Dealer, Please Contact: Waverly Operations 106 12th Street S.E. Waverly, IA 50677 USA Phone: (319) 352-3920 Fax: (319) 352-9395 email: inquire@terexwaverly.com web: http://www.terex-cranes.com

Page 36 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Aspen Equipment Co. 9150 Pillsbury Ave. S Bloomington, MN 55420 (952) 888-2525

McAllister Equipment Co. 150 E. North Ave. Villa Park, IL 60181 (630) 530-7600 (630) 530-1901 Alsip/Chicago (708) 389-7700

E. Peoria (309) 694-4455 Rockford (815) 227-0555 Springfield (217) 789-0351

Roland Machinery Co. 4670 Crossroads Industrial Drive Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252

Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Carterville, IL (618) 985-3399

Central Power Systems & Services 9200 Liberty Drive Liberty, MO 60468 (816) 781-8070 (816) 792-9100 Springfield, MO (417) 865-0505 Wichita, KS (316) 943-1231

Great Bend, KS (620) 792-1361 Liberal, KS (620) 624-7274 Salina, KS (785) 825-8291 Colby, KS (785) 462-8211

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 37

65 5 E ||Motor or Grad G Grader ra ad der de TURBO Moto

Compact Grader With Big Grader Features ILLINOIS BIRKEY'S CONST. EQUIPMENT construction.birkeys.com Galesburg (309) 341-4360 Bloomington (309) 827-0520 Mattoon (217) 235-3158 Urbana (217) 337-1781 DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon (618) 242-2273 WEST SIDE TRACTOR SALES www.westsidetractorsales.com Naperville (630) 355-7150 Rockdale (815) 730-9011 Rockford (815) 961-3160 South Holland (708) 331-6362 Wauconda (847) 526-7700

INDIANA DIAMOND EQUIPMENT www.diamondequipment.com Evansville (812) 425-4428 MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis (317) 545-2151 Indianapolis (317) 244-RENT (7368) Fort Wayne (260) 483-6469 (heavy equip.) (260) 969-3322 (rental store) Lafayette (765) 449-8191 (heavy equipment) (765) 446-5600 (rental Store)

INDIANA MACALLISTER MACHINERY SALES/RENTALS Terre Haute (812) 478-3155 (heavy equipment) (812) 231-6000 (rental store) South Bend (574) 288-6622 Washington (812) 254-1712 Bicknell (812) 735-0286 Bloomington (812) 349-9220 Fishers (317) 598-9700 Greensburg (812) 663-5829 Richmond (765) 966-0626 Yorktown (765) 759-2CAT (2228)

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

KENTUCKY DIAMOND EQUIPMENT www.diamondequipment.com Bowling Green (270) 781-1061 OHIO CAT www.OhioCAT.com Richwood (888) 446-4658

KANSAS SELLERS EQUIPMENT www.sellersequipment.com Garden City (620) 275-9621 Olathe (913) 764-2011 Salina (785) 823-6378 Topeka (785) 862-0031 Wichita (316) 943-9311

WILSON EQUIPMENT CO. www.wilsonequipment.com Corbin (606) 528-0700 Lexington (859) 254-6443 Prestonburg (606) 874-8036

MICHIGAN MILLER-BRADFORD & RISBERG, INC. www.miller-bradford.com Negaunee 800-562-9770 MINNESOTA ZIEGLER CAT Marshall (800) 325-4929 North Mankato (877) 845-3938 Rochester (800) 247-1068 Shakopee (800) 352-2812 St. Cloud (800) 522-9469

www.noram65.com

MINNESOTA ZIEGLER CAT www.ZieglerCAT.com Minneapolis (800) 352-2812 Brainerd (877) 829-9850 Buhl (800) 446-9795 Columbus (866) 982-5656 Crookston (800) 422-5782 Duluth (800) 421-3831 Fergus Falls (800) 346-7649 Jackson (866) 847-6401

MISSOURI FABICK CAT www.fabickcat.com Fenton (636) 343-5900 Fenton (rental services) (636) 343-5905 Cape Girardeau (573) 332-1122 Columbia (573) 442-6880 Foristell (800) 539-9217 Jefferson City (573) 636-3184 Joplin (417) 624-3010 Springfield (417) 866-6651 Springfield (rental services) (417) 866-2100

OHIO OHIO CAT www.OhioCAT.com Broadview Heights (800) 837-6200 Sharonville (888) 332-4658 (Sales & Service) (888) RENT-441 (Rental) Columbus (888) 441-4658 (Sales & Service) (888) RENT-441 (Rental) Perrysburg (888) 339-4658 (Sales & Service) (888) RENT-441 (Rental) Troy (888) 330-4658 Youngstown (800) 837-6203 Cadiz (800) 837-6204 Canton (800) 837-6207 Zanesville (800) 837-6205 N. Canton (888) 736-8443 Oakwood Village (800) 633-1020

WISCONSIN MILLER-BRADFORD & RISBERG INC. www.miller-bradford.com Sussex 800-242-3115 Madison 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Abbotsford 888-886-4410

Page 38 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

it’s not ’s fault

CONTINENTAL EQUIPMENT CORP. A division of AIS

by TheShelterPetProject.org

www.aisequip.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000 Fax: 517/321-4191

BRANDEIS MACHINERY & SUPPLY COMPANY

2000 Harlan Drive Terre Haute, IN 47802 (812) 299-4747 (888) 343-4747 Fax: (812) 299-3687 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 (618) 242-2273 (800) 388-6396 Fax: (618) 242-9161

1046 Lovers Lane Bowling Green, KY 42103 (270) 781-1061 (800) 489-1061 Fax: (270) 781-0907 1530 Heil Quaker Blvd. Nashville, TN 37086 (615) 641-1100 (800) 635-9454 Fax: (615) 641-1108

2300 Cassens Drive Fenton, MO 63026 (636) 343-9970 www.lubyequipment.com 199 Airport Rd. Cape Girardeau, MO 63702 (573) 334-9937 4375 Camp Butler Rd. Springfield, IL 62707 (217) 744-2233 2625 North 24th St. Quincy, IL 62305 (217) 222-5454

8853 Petrov Drive Caseyville, IL 62232 (618) 397-9971

Joplin, MO (800) 878-8223 (417) 781-8222

Wichita, KS (800) 878-3346 (316) 838-3346 Topeka, KS (800) 878-4345 (785) 267-4345 Garden City, KS (800) 511-1435 (620) 275-1996

4100 Gardner Ave. Kansas City, MO 64120 (816) 241-9290 (816) 241-1738 www.vlpco.com

Springfield, MO (800) 955-2729 (417) 887-2729

Diamond Equipment Inc. 1060 E. Diamond Ave. Evansville, Indiana 47711 (812) 425-4428 (800) 258-4428 Fax: (812) 421-1036 www.diamond equipment.com

; d gZ Xa d h j gZ V [ [ Z X i h b d gZ i ] V c _j h i nd j # > i V [ [ Z X i h nd j g l ] d a Z [ V b â n# 6 b âa^ d c [ V b â^ Z h l âa [ V XZ a d h ^ c \ i ] Z ^ g ] d b Z h i ] ^ h n Z V g# 8 V a a i d Y V n [ d g g Z V a ] Z a e V c Y \ j ^ Y V c X Z # 7 Z X V j h Z c d i ] ^ c \ ^ h l d g h Z i ] V c Y d ^ c \ c d i ] ^ c \ #

&" - - - " . . * " = D E :

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 502/499-3195 Fax Evansville, IN 812/425-4491 812/425-1171 Fax Corbin, KY 606/528-3700 606/528-9014 Fax Lexington, KY 859/259-3456 859/254-0783 Fax Stanville, KY 606/478-9201 606/478-9208 Fax Paducah, KY 270/444-8390 270/575-4907 Fax Indianapolis, IN 317/872-8410 317/872-8417 Fax Ft.Wayne, IN 260/489-4551 260/489-1620 Fax South Bend, IN 574/233-8770 574/233-8775 Fax

ROAD MACHINERY & SUPPLIES COMPANY www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8671 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 218/741-9011 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 Milan, IL 309/787-1742 800/633-9114

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. 1001 S. 7th St. Trafficway Kansas City, KS 66105 913/371-3822 913/371-3870 Fax Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 39

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 800/252-2926 Bolingbrook, IL 630/739-7474 800/826-9608 Carterville, IL 618/985-3399 800/274-7202 Marengo, IL 815/923-4966 800/765-2635 Portage, IN 219/764-8080 888/764-8226 Escanaba, MI 906/786-6920 906/786-5813 Fax Bridgeton, MO 314/291-1330 800/274-7230 Cape Girardeau, MO 573/334-5252 800/274-7210 Columbia, MO 573/814-0083 800/274-7212 Palmyra, MO 573/769-2056 800/274-7214 DePere, WI 920/532-0526 920/532-0526 Fax DeForest, WI 608/842-4151 608/842-4193 Fax Eau Claire, WI 715/874-5400 715/874-5401 Fax Franksville WI 262/835-2710 262/835-2844 Fax Schofield, WI 715/355-9898 715/241-0044 Fax

NEXT DAY P PAR ARTS From Komatsu - The Parts rts Experts

GENERAL EQUIPMENT & SUPPLIES www.genequip.com 4300 W Main Ave Fargo ND 58103 800/437-2924 701/364-2190 Fax 905 20th Avenue SE Minot ND 58072 800/825-0479 2300 Vermont Avenue Bismarck ND 58504 800/279-4437

www.komatsuamerica.com .komatsuamerica.com

Page 40 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NEW M SERIES IN STOCK! Authorized Bobcat® Dealer

Used Snowblade Special! Call for Pricing.

New Bobcat S130, Call for Pricing

Bobcat Forestry Cutter on T320, for Rent

Largest Selection in the Midwest!

Bobcat Tractors in Stock Now! Call for Pricing.

New Bobcat S850, Call for Pricing

USED EQUIPMENT ®

Authorized Bobcat Dealer Bobcat 440 ................Starting at $4,500 Bobcat 463’s ..............Starting at $8,000 Bobcat 542B ..............Starting at $6,900 Bobcat 642 ..............................$7,500 Bobcat 642B ............................$8,500 Bobcat 743 ................Starting at $8,000 Bobcat 751 ......Several Starting at $9,900 Bobcat 753 ..............Starting at $10,000 Bobcat 763F, Series, Open Cab ....$11,500

Bobcat 773G, With Heat ............$15,900 Bobcat 843, Heated Cab ............$10,000 Bobcat 853’s ............Starting at $11,000 Bobcat 863, With Heat ..............$12,900 Bobcat 863G ............................14,900 Bobcat 873 ............................$17,900 Bobcat S130, 2006, Heated Cab ......CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours....Starting at $14,900 Bobcat S250..............Starting at $17,500

Compact Track Machines Bobcat T190’s............Starting at $17,500 Bobcat T200..............Starting at $17,500 Bobcat T250, Gold ......Starting at $24,500 Bobcat T300..............Starting at $25,000

Other Brands Gehl 4615 Skidloader, Open Canopy $8,500 Mustang 2105 ............................CALL New Holland L175........................CALL John Deere 250/260 Models Available...... ..............................................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys ..................Starting at $15,900 Bobcat 334 ................................CALL Bobcat 337D, A/C, HT ................$35,900 Bobcat 341 ..............Starting at $29,990 Bobcat 442 ....Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500 www.farmriteequip.com U.S. Hwy 12 W Dassel, MN 55325

320/275-2737 • Toll Free 888/679-4857

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 41

Mid Country Machinery (800) 206-5936

3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302 4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710

www.midcountrymachinery.com CRAWLER DOZERS 2004 JOHN DEERE 450HLT, 73hp, Operating Weight 15,500 lbs, 16" Shoes, 1462 Hrs ..........................................................................$35,000 2002 CATERPILLAR D3G XL, OROPS, STANDARD TRACK, PAD WIDTH 16" @ 70%, CAT ENGINE, SEMI U BLADE, OPERATING WEIGHT 16,227 lbs, 1395 Hrs................................................................................$35,000 1990 TD7G, OROPS, STANDARD TRACK, PAD WIDTH 17" @ 60%, CUMMINS ENGINE, PAT BLADE, 3969 Hrs ..........................................$18,000 2006 CATERPILLAR D6R XL III, EROPS, Air Conditioning, Heat, Standard Track, Pad Width 24" @ 80%, Caterpillar Engine, Semi U Blade, 8336 Hrs ..............................................................................................$143,000 2007 KOMATSU D31EX, EROPS, Air Conditioning, Heat, Pad Width 16", Komatsu Engine, PAT Blade, 1710 Hrs ........................................$44,500 2004 CATERPILLAR D5N XL, OROPS, Aux Hydraulics, Standard Track, Pad Width 22" @ 80%, Caterpillar Engine, PAT Blade, 2722 Hrs $54,000 2008 JOHN DEERE 650J LGP, EROPS, Air Conditioning, Heat, Standard Track, Pad Width 24" @ 80%, John Deere Engine, PAT Blade, Laser Leveling System (Top Con MC-R3), Work Lights, Very Clean Unit, 1769 Hrs ..............................................................................................$179,500 2007 CATERPILLAR D6T XW, 5205 Hrs ......................................$235,000 2011 JOHN DEERE 650J XLT, John Deere Diesel Engine, OROPS, Hydrostatic Transmission, Front Sweeps, Front Engine enclosures, 18 in. SG Salt pads, 105" 6 way blade, long track frame, 742 Hrs 1986 CATERPILLAR D7H ..............................................................$67,500 1990 CATERPILLAR D6H II 2005 CATERPILLAR D6RXW II, 8387 Hrs 1988 CATERPILLAR D6H, CAB, HEAT, AC, 8403 Hrs 2007 CATERPILLAR D6R XW III 1977 CATERPILLAR D8K 2007 CATERPILLAR D6T XW, Enclosed Cab, Air Conditioning, Heat, Standard Track, Pad Width 28” @ 80%, Caterpillar Engine, PAT Blade, AM/FM and CD Radio, 3548 Hrs 1974 DRESSER TD15C 2007 CATERPILLAR D6T XW, EROPS, CAB, A/C, Semi-U Blade with Tilt, 3800 Hrs 1994 CATERPILLAR D5H XL

CRAWLER EXCAVATORS 2007 KOBELCO SK 135 SR, 92hp, 20" Shoes, Operating Weight 30,424 lbs, 18' Dig Depth, EROPS, A/C, Plumbed, 1371 Hrs ..................$89,500 2007 KOBELCO SK 135 SR, Operating Weight 30,424lbs, 92hp, 18' Dig Depth, 20" Shoes, EROPS, A/C, Plumbed, 1811 Hrs ....................$91,500 2007 KOBELCO SK 350 LC8, Operating Weight 79,600 lbs, 264 hp, Maximum Dig Depth 24' 10", Bucket Breakout Force 29,230lbs, EROPS, AIR CONDITIONING, HEAT, STANDARD TRACK, PAD WIDTH 32" @ 80%, 2825 Hrs ..........................................................................$160,000 2008 KOBELCO SK 80 SR, EROPS, A/C, Heat, CP Manual Quick Coupler, 6' Stick, Standard Track, 24" Shoes - 80%, Semi-U Blade, 17" CP Bucket, Operating Weight 17,600lbs, 54hp, 808 Hrs ..................$70,000 2006 KOBELCO SK 115 SR, EROPS, A/C, Heat, 8' Stick, Hydraulic Thumb, Standard track, 23" Shoes - 75%, Isuzu Engine, Semi-U Blade, 3' CP Bucket, Operating Weight 31,750lbs, 84hp, 1696 Hrs........$77,500 2006 KOBELCO SK 330 LC, EROPS, HEAT, GEITH QUICK COUPLER, 31.5" SHOES AT 75%, MITSUBISHI ENGINE, 11FT. STICK, 2FT. HENSLEY DITCHING V-BUCKET, 238hp, 3708 Hrs..............................$189,000 2010 KOBELCO SK 260LC-8, EROPS, AIR CONDITIONING, HEAT, 60' LONG REACH, PAD WIDTH 32" @ 95%, CHN ENGINE, TAG BUCKET 60", STICK LENGTH 25', Operating Weight 55,556lbs, 175hp, 800 Hrs.......... ..................................................................................................$225,000 2008 JOHN DEERE 350D LC, EROPS, AIR CONDITIONING, STANDARD TRACK, HEAT, STICK 13', PAD WIDTH 32" @ 90%, ENGINE JOHN DEERE, OPERATING WEIGHT 77,970lbs 271hp, 1456 Hrs ........$239,000 2005 HITACHI ZX160LC, 2637 Hrs ................................................$85,000 2007 HITACHI ZX80, EROPS, Air Conditioning, Push Blade, 24" Digging Bucket, Rubber Tracks, Operating Weight 15,905lbs., Isuzu CC-4JG1 52hp Engine, 1899 Hrs 2006 KOMATSU PC160LC, 1945 Hrs ............................................$77,500

2005 KOBELCO SK330LC, 4069 Hrs 2011 KOBELCO SK 295-9 TIER 4, 31.5" SEMI-TRIPLE GROUSER SHOE, STD BOOM W/ARM CYL, STD ARM W/BKT CYL & LINKAGE, OPR CONT PATTERN CHGR 2 WAY SK, LOWER BASE MACHINE SK295-10, REAR VIEW CAMERA, MECHANICAL SEAT, AIR CONDITIONING, HEAT, PAD WIDTH 32", MECHANICAL SEAT, 473 Hrs 2005 KOBELCO SK 480LC, Geith Hydraulic Quick Coupler, Additional Stick, Counter weight removal device with remote, 34" Bucket, 72" Bucket, EROPS, Air Conditioning, Heat, 4805 Hrs 2006 KOMATSU PC200LC-8, EROPS, Air Conditioning, Heat, 3509 Hrs .. ....................................................................................................$99,000 2011 KOBELCO SK 210L Tier 3, ROPS, 31.5" SEMI-TRIPLE GROUSER SHOE, 18'6" BOOM W/ARM CYL, 9'8" ARM, OPR CONT PATTERN CHGR 2 WAY SK, Combo 1-2 way Dbl/Sngl Pump w/N&B Only-Arm, Angle Guards, 131 Hrs 1996 KOBELCO SK 150 MARK IV 2011 KOBELCO SK 210, 42" Bucket, 197 Hrs 2004 KOBELCO SK 330LC, 4534 Hrs 2005 KOBELCO SK 330LC, EROPS, Air Conditioning, Heat, 5628 Hrs .... ....................................................................................................$85,000 2006 KOBELCO SK 330LC, 4566 Hrs............................................$89,000 2005 KOBELCO SK 330LC, 6129 Hrs............................................$85,000 2006 KOMATSU PC200LC-7, EROPS, Air Conditioning, Heat, Stick Length 9'8", Manual Thumb, Pad Width 28" @ 70%, Komatsu Engine, 5202 Hrs ......................................................................................$85,000 2000 GRADALL XL3200, Cummins Diesel Engine, Equipped with Cab, Telescopic 2 Piece Boom, Digging Bucket, Air Conditioning, Heat, Pad Width 24" @ 70%, 6013 Hrs 2007 KOBELCO SK 350LC ..........................................................$125,000 2009 KOBELCO SK 485LC, 66" Esco Bucket 2010 KOBELCO SK 350LC, EROPS, Air Conditioning Heat, 1192 Hrs 2006 CATERPILLAR 325CL, EROPS Air Conditioning, Heat, 2062 Hrs .... ..................................................................................................$160,000 2005 JOHN DEERE 200CLC, 5075 Hrs..........................................$82,000 2006 KOBELCO SK 210LC, 2043 Hrs 2006 KOBELCO SK 160LC, 1732 Hrs 2012 KOBELCO SK 210, 42" Bucket, 1 Hr 2012 KOBELCO SK 210-9 Tier 4, 31.5" SEMI TRIPLE GROUSER SHOE, 18'6" BOOM W/ARM CYLINDER, OPR CONT PATTERN CHGR 2 WAY SK, COMBO 1-2 WAY DBL/SNGL PUMP W/, N&B ONLY-ARM (STD), STANDARD LOWER (BASE), REAR VIEW CAMERA, 9'8" STANDARD ARM, MECHANICAL SEAT, ANGLE GUARDS, 1 Hr 2012 KOBELCO SK 210-9 Tier 4, 31.5" SEMI TRIPLE GROUSER SHOE, 18'6" BOOM W/ARM CYLINDER, OPR CONT PATTERN CHGR 2 WAY SK, COMBO 1-2 WAY DBL/SNGL PUMP W/, N&B ONLY-ARM (STD), STANDARD LOWER (BASE), REAR VIEW CAMERA, 9'8" STANDARD ARM, MECHANICAL SEAT, ANGLE GUARDS KOBELCO SK485, W/LABNTY SHEAR, 1980 Hrs 2007 KOBELCO SK 135SLRC 2004 CATERPILLAR 320CL, 3642 Hrs 2007 KOBELCO SK 170 LC8, 1574 Hrs ......................................$108,000 1994 KOMATSU PC300LC-5, GP BUCKET

MINI EXCAVATORS 2008 KOBELCO SK 17SR-3, Operating Weight 3638 lb, 15.2 hp Maximum Dig 7' 1", Bucket Breakout Force 2900 lb Bucket Capacity 1.55 cu. ft., 315 Hrs ....................................................................$26,000 2009 KOBELCO SK 35 SR-5, 28hp, Operating Weight 7892 lbs, 10' Dig Depth, EROPS, AIR CONDITIONING, HEAT, QUICK COUPLER(TAG), STANDARD TRACK, PAD WIDTH 12" @ 80%, YANMAR ENGINE, CP BUCKET 30", 542 Hrs ..................................................................$41,000 2009 KOBELCO SK 35 SR-5, Auxillary Hydraulics, Operating Weight 7960 lb, 28 hp, Max Dig Depth 10' 1", 712 Hrs............................$41,000 2001 IHI 35NX, EROPS, 52" Stick, 12" Shoes - 50%, Isuzu Engine, 21" Bucket w/teeth, 3431 Hrs ............................................................$17,000

2007 TAKEUCHI TB138FR, OROPS, Aux Hyd, Standard Track, 75" Stick, 14" Shoes (Rubber) - 80%, Yanmar Engine, Overall Good Condition, 754 Hrs ........................................................................................$35,000 2007 NEW HOLLAND E18 SR, OROPS, AUX HYDRAULICS, STICK LENGTH 39", PAD WIDTH 9" @ 70%, MITSUBISHI ENGINE, SEMI U BLADE, WB BUCKET 16", 316 Hrs................................................$21,500 2007 KOBELCO SK 35 SR-3, OROPS, Pad Width 12" Excellent Cond., Stick 4'4", Yanmar Diesel Engine, Dig Depth 10'1", Operating Weight 8050 lbs, 210 Hrs ........................................................................$44,000 2003 CATERPILLAR 308C CR, CAB - HEAT - A/C, AM/FM RADIO, 18" RUBBER TRACK PADS, 7' 7" HYDRAULIC BLADE, CAT 24" GP TOOTH BUCKET W/SIDECUTTERS, AUXILIARY HYDRAULICS / FOOT CONTROL, 4M40 MITSUBISHI ENGINE, 1774 Hrs..............................$47,500 2001 JOHN DEERE 17ZTS, JD DIESEL ENGINE, OROPS, FRONT BLADE, SWING BOOM, AUXILIARY HYDRAULICS, RUBBER TRACKS, C&P HD 12" DIGGING BUCKET - WELDCO BEALES, WELDCO BEALES STYLE MANUAL COUPLER, 628 Hrs ......................................................$22,000

WHEEL LOADERS 2007 NEW HOLLAND W190B, Air Conditioning, GP BUCKET - CAPACITY 4.25 CU. YD., 195HP, EROPS, 4WD, Heat, Ride Control, New Holland Engine, Operating Weight 39,074 lbs, 2358 Hrs ........................$119,500 2001 VOLVO L220E, EROPS, 352 hp, Operating Weight 68,960 lb, Air Conditioning, Heat, 4WD, Volvo Bucket with Bolt-on-Edge, 13,839 Hrs .. ....................................................................................................$89,000 2001 CATERPILLAR 902, EROPS, A/C, HEAT, 78" CU. YD. BUCKET WITH CUTTING EDGE, 4 - 15.5 180-18 TIRES - 80%, 48 HP, 2458 Hrs$29,500 2010 KAWASAKI 90ZV-2, 271 HP, Operating Weight - 51,257 lbs, EROPS, Reach at Max Lift & Dump - 3.9ft, Air Conditioning, Heat, Ride Control Tires 26.5 R25 (excellent), Cummins Engine, 676 Hrs ..$265,000 2010 KAWASAKI 80ZV-2, EROPS, 198 HP, Operating Weight - 39,308 lbs; Reach at Max Lift & Dump - 3.7ft, 4WD, Quick Coupler, Ride Control, Air Conditioning, Heat, Cummins Engine, 501 Hrs ......$195,000 2006 NEW HOLLAND LW190.B, EROPS, 4WD, HEAT, AIR CONDITIONING, TIRES 23.5 R25, NEW HOLLAND ENGINE, Operating Weight 35,935 lbs; 205 hp, 3573 Hrs 1997 KAWASAKI 65Z, EROPS, HEAT, TIRES 20.5X25, Operating Weight 22,509 lbs, 134hp, 6598 Hrs ........................................................$52500 2005 CATERPILLAR 950G, EROPS, Air Conditioning, Heat, 4WD, Tires 23.5-25 (great condition), Caterpillar Engine, Caterpillar Bucket 4.25 yd 3 with Bolt on Edge, 5525 Hrs....................................................$129,500 2004 NEW HOLLAND LW50 B, EROPS, Air Conditioning, Heat, Aux Hydraulics, Quick Coupler, 4WD, Tires 335/80 R18 Michelin, Deutz Engine, New Holland Bucket 74" with Bolt on Edge, 375 Hrs ......$45,000 2011 KAWASAKI 65ZV-2, Enclosed Cab, Tires 20.5-25, 4 way Flasher Kit, Quick Coupler, Ride Control Kit, RIMS, Counter Weight OPT, Quick Fork 48", Air Conditioning, Heat, 4WD, 5 Hrs 2011 KAWASAKI 65ZV-2, Enclosed Cab Assy, 4 way Flasher Kit, Ride Control Kit, Counter Weight OPT, Quick Coupler, Quick Fork 48", Switch, Batt Discon Man, RIMS, 20.5-25, Tire, 20.5 R25 VMT L3 B/S, LTD Slip Diff, F/R, Bucket Quick 2.5 w/BOCE, Multi Function Grip, 137 Hrs 2007 KOMATSU WA250-5L, Komatsu Diesel engine, EROPS, AC, Quick Coupler, GP Bucket, 5248 Hrs ......................................................$87,500 1990 JOHN DEERE 544E, EROPS, 14,988 Hrs ..............................$35,000 2012 KAWASAKI 95ZV-2, Enclosed Cab Assy, RIMS 29.5-25, K-Lever Kit, Ride Control Kit, Counter Weight OPT, Batt Discon Man Switch, Lincoln Lube Opt, Bucket GP 7.0 W/BOCE, Tire 29.5 R25 VMT L3 B/S, 7 Hrs 2004 KOMATSU WA65-3, EROPS, Air Conditioning, Heat, Quick Coupler (JRB), 4WD, Tires 335/80R 18, Komatsu Engine, Komatsu Bucket w/Bolt on Edge, 625 Hrs 2009 CATERPILLAR 938H, EROPS, Air Conditioning, Heat, 634 Hrs ........ ..................................................................................................$149,000 1972 CATERPILLAR 950 Dresser 520C Front End Loader w/Bucket 2003 KOMATSU WA180-MC3 1986 CATERPILLAR IT-18

Page 42 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Whayne Supply Company Unveils Cat CT660 Vocational Truck Whayne Supply Company unveiled the new Cat CT660 vocational truck in a delivery and presentation of keys to Jim Smith Contracting. With the presentation, Jim Smith Contracting became the first business in Kentucky to take delivery of the Cat CT660. The truck was delivered by Frank Lewis, vice president of power systems of Whayne Supply Company and presented at the company’s branch in Paducah, Ky. Jim Smith Contracting owner Rex Smith was present to accept the truck. “The CT660 is a revolutionary truck and we are very excited about the delivery to Jim Smith Contracting,” said Lewis. “This truck is built for versatility and the first of its kind in this region. I expect to see a lot of them on the road throughout Kentucky in the future.” The CT660 debuted in the spring of 2011 and Jim Smith Contracting, located in Grand Rivers, Ky, was the first in the Commonwealth to order one for the company’s operation that specializes in highway construction, asphalt paving and grade and drain work. Built for a wide array of applications, the CT660 is loaded with features, options and horsepower/torque to handle the toughest jobs, according to the manufacturer. The CT660 is designed for day cab vocational applications such as construction and dump trucks, fuel haulers and regional transportation. The Cat CT660 Vocational Truck is now available for purchase at Whayne Supply Company branches throughout Kentucky. For more information call 800/494‐2963 or visit Whayne Supply Company unveiled the new Cat CT660 vocational truck in a delivery and presentation of keys www.whayne.com. to Jim Smith Contracting.

Roads and Motorists’ Money at Stake in Michigan FUNDING from page 1

$1.4 billion a year over 20 years on our roads, it saves us money.” Organizations supporting more transportation funding say the gap between what’s spent to maintain roads and the amount of money needed to properly do the job grows every year. Most politicians in Lansing agree that the state needs to do more to repair roads and bridges. The problem arises when talk turns to asking drivers to pay more for improvements. A bipartisan set of bills that will rekindle that discussion was expected to be introduced in the Legislature in January. The initial proposal could include raising annual vehicle registration fees by an average of roughly $60 a year, according to the Michigan Infrastructure and Transportation Association. Higher vehicle registration fees would raise more money and ensure that electric and hybrid vehicle owners, who buy little or no fuel, are paying more toward road upkeep. The upcoming proposal also might replace the state’s 19-cents-per-gallon tax on gasoline and the 15-cents-per-gallon tax on diesel fuel with a tax on the wholesale price of fuel, potentially raising more money than the current system. It’s hard to tell what the final proposal

might look like as backers try to gain support in a Republican-led Legislature hesitant to approve tax or fee increases. But supporters are banking on bipartisan support. They hope the need to fix potholes and make other transportation system improvements will win out in the end. “I don’t think anything, when you’re talking about more revenue, is easy,” said Rep. Rick Olson, a Republican from Saline who last year helped lead a bipartisan study that called for more investment in roads. “But I do think it’s possible. It’s a generally recognized need. No one’s arguing whether there’s a need or not.” There are different measures and projections of Michigan road quality, but none of them look good over the next five to 10 years at current funding levels. The Michigan Department of Transportation said nearly 89 percent of the pavement on its “trunkline” road or interstate and highway system was in good or fair condition in 2011. That would drop to about 44 percent by 2020 without increased investment. A broader review covering Michigan

roads eligible for federal aid reported 65 percent of pavement in good or fair condition in 2010, meaning one of every three miles was rated in poor condition. The Michigan Transportation Asset Management Council

Friday’s taping of public television’s “Off the Record” program. “Our roads are crumbling, the bridges are dangerous.” Some key business groups, including the Michigan Chamber of Commerce, also support more investment in roads. Still, there will be resistance to higher fees and taxes, or at least resistance to raising motorists’ costs without demanding efficiencies. Some lawmakers are focused on a plan to allow counties to get rid of local road commissions and absorb their duties to cut administration costs. Other ideas include moving some of the 6 percent sales tax now collected on fuel to road funding rather than going to the state’s genMike Nystrom eral fund. Michigan Infrastructure and Transportation Association The portion of the sales tax going to public schools and local governments would not be affected. report projects that 50 percent will be in “We need to look at the current accountagood or fair shape in 2015. bility and efficiency of the system that we “Everybody knows that our roads here in have, to make sure that every dollar we are Michigan are just in terrible shape,” Mike bringing in is used in the best way possible,” Nystrom of the Michigan Infrastructure and said Ari Adler, a spokesman for Republican Transportation Association said during House Speaker Jase Bolger.

“Everybody knows that our roads here in Michigan are just in terrible shape. Our roads are crumbling, the bridges are dangerous.”

Pages 43-53

Crushing, Screening & Recycling Section IROCK Crushers Adds Track Screening Plants to Lineup IROCK Crushers, headquartered in Oakwood Village, Ohio, recently added Track Screening Plants to their lineup of material processing equipment. According to General Manager Bob Nelson, the decision to offer track screening plants was driven by the company’s interest in addressing customer needs and providing its growing dealer network greater access to marketplace demands. Nelson explained that since IROCK’s dealer network reported success in selling their crushing plants, it became apparent there was a need for quality track screening plants to complement its existing crusher product line. In response, IROCK came up with a line of track screening plants that offer customers the kind of equipment that IROCK has

become known for in the marketplace. IROCK’s new track screening plants were designed with an eye toward customer productivity and profit. The new track screening plants also meet IROCK’s fundamental strategy of sourcing name brand engines and components. According to Nelson, this approach helps expedite service and repairs by ensuring that replacement parts are readily available. Like its crushers, the track screening plants are manufactured with high quality components and are powered by CAT engines. Although IROCK has been marketing the track screening plants since the beginning of 2011, the company wanted to have production plants in place for a period to time before making a formal public announcement about the addition. According to

Nelson, IROCK now has a significant amount of track screening plants in the field and feedback from customers has been positive. IROCK’s track screening plants offer competitive advantages in pricing, durability, and production capacity. The company views its machines as having the versatility to be used in stand-alone screening applications or to be used in conjunction with IROCK’s crushing plants and other manufacturers as well. As with its crusher line, IROCK plans to carry a full inventory of replacement parts to ensure its ability to provide quick and reliable service to its customers. Parts ordering will be available 24 hours a day, seven days a week with IROCK’s recently implemented online parts department. IROCK’s line of track screening plants

currently includes the IROCK TS-512 tracked screener, a durable machine designed for the recycling and aggregate contractor market. The IROCK TS-516 is a heavy duty, high capacity scalper capable of screening a wide variety of material in harsh conditions. The IROCK TS-522 was developed with medium to large scale operators in mind who require the ability to process large volumes of high grade products. IROCK’s newest addition, the TS-522TD track screening plant features a third deck to enable the production of four products. IROCK has been in business for 20 years with 2010 being its best year in a decade largely due to the company establishing and meetings its goal of building its dealer network. IROCK has plans to introduce additional equipment in the upcoming year.

Although IROCK has been marketing the track screening plants since the beginning of 2011, the company wanted to have production plants in place for a period to time before making a formal public announcement about the addition.

Page 44 • February 4, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Morbark M20R Forestry Brush Chipper a Versatile Designed to increase safelarge diameter material, ty and reduce ground labor, which makes this machine the Morbark Beever M20R more productive and the forestry is a practical option owner more profitable, for those looking to enter the according to the manufacturbiomass-market with low er. startup costs. The Beever A chambered air impeller M20R forestry is an entrysystem with four fan blades level biomass chipper for increase airflow and reclaiming forestry slash and improves chip discharge harvesting tops. With a 28velocity and increases the in. (71 cm) wide infeed ability to load all kinds of opening and engine options foliage. Chips follow a between 330 and 400 hp smoother, more gradual tra(246 and 298 kW), the jectory at a greater velocity Beever M20R forestry is a because of the forestry dishard-working, aggressive charge chute with AR-400 machine, according to the top. This makes it capable of manufacturer. packing maximum tonnage The frame of the Beever in semi trailer chip vans. M20R forestry is built for The 15-function wireless enhanced strength with a 2 The Beever M20R forestry is an entry-level biomass chipper for reclaiming forestry slash and harvesting tops. remote that comes standard by 10 in. (5 by 25 cm) recon the M20R forestry allows tangular structural steel tubcontrol of hydraulic funcing mainframe. The front and rear hydraulic stabilizers pro- need to replace an entire holder assembly. Babbitt style tions; throttle and engine kill, without requiring an operator vide stability at all points of the machine, and the rear drop knives maintain the chip consistency and reduce the need for in the immediate vicinity of the machine. The tether cord anvil adjustment at knife changing time. backup reduces the opportunity of any downtime if the legs reduce strain on the feed bed at the connecting point. The feed yoke of the M20R forestry is located near the remote is misplaced or the battery dies. The Beever M20R forestry is designed with removable For more information, call 800/255-8839 or visit knife holders to reduce repair and maintenance costs. Wear chipper bearings, reducing the amount of dead space behind strips reduce the wear on the knife holders and reduce the the feed wheel. This reduces the opportunity for stalling on www.morbark.com.

Low-Profile Telestacker Conveyor Has Onboard Power Superior Industries offers a range of low-profile TeleStacker conveyors including its latest 170-ft. (52 m) unit. With a low-level loading hopper, these telescoping radial stacking conveyors reduce equipment required to transfer material, minimize the number of loads in a transport, allow for faster, easier relocation and reduce space requirements, according to the manufacturer. To carry out a request for onboard power, this particular TeleStacker conveyor was engineered with a 200 kW gen-set unit. The self-contained telescopic conveyor will load ships and stockpile material at the Lake Erie Port of Toledo in Ohio. In addition, the stacker was designed with Superior’s FD axle assembly. Key to its mobility, the FD axle’s hydraulically operated stacking wheels allow for the quick transition between transport and stockpile or ship loading modes. Superior’s TeleStacker conveyors are available in 110, 130, 136 (low profile), 150, 158 (low profile), 170 and 190 ft. (33, 40, 41, 46, 48, 52 and 58 m) models. Conveyor capacities range from 500 to 5,000 tph (453 to 4,536 t). Each unit comes standard with Superior’s FB undercarriage. The bracing adds extra strength, stability and safety, according to the manufacturer. For more information call 320/589-7085 or visit www.superior-ind.com.

This particular TeleStacker conveyor was engineered with a 200 kW gen-set unit. The self-contained telescopic conveyor will load ships and stockpile material at the Lake Erie Port of Toledo in Ohio.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 4, 2012 • Page 45

Powercrusher™ Crushers & Screeners from Atlas Copco

Rock Star

Brandeis Machinery & Supply Co. www.brandeismachinery.com Evansville, IN (812) 425-4491 Ft. Wayne, IN (260) 489- 4551 Indianapolis, IN (317) 872-8410 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Louisville, KY (502) 491-4000 Paducah, KY (270) 444-8390 Stanville, KY (606) 478-9201

There are many reasons why the Powercrusher is a star. The 11 models of crushers and six models of screeners offer capacities ranging from 250 to 500 tons per hour. Other features include: t Jaw crushers that use Quattro Movement, a figureeight motion that increases feeding capacity and produces a post-crush at the outlet—like two crushers in one. t A pre-screen feature available on the PC 6 model for higher value end product. t Track mounted for mobility and maneuverability in a smaller footprint. t National support for parts and service from Atlas Copco

Gibson Machinery LLC www.gibsonmachinery.com Oakwood Village (Cleveland) OH (440) 439-4000 Pittsburgh, PA (724) 695-5000

Powercrusher—POWER is just the beginning. 800-732-6762 Atlas Copco Construction & Mining www.atlascopco.us

Page 46 • February 4, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

102x152 Track Mounted Impact Plant

6x16 2 Deck Screen-It

Rock-It Static Grizzly

Separate-It RWS 2000 Rock/Wood Separator

PO Box 104524 4303 RT. CC Jefferson City, MO 573-635-8700 (Serving Missouri and Eastern Kansas)

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 4, 2012 • Page 47

THE REVOLUTION BEGINS...

EXODUS MACHINES INNOVATIVE

AMERICAN MADE

NO COMPROMISE

JOIN THE REVOLUTION Indianapolis, IN www.macallister.com 800-382-1896

Page 48 • February 4, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Staying Informed...

Kolberg, Astec Release New ‘Facts & Figures’ Reference Guide KPI-JCI and Astec Mobile Screens has released its newest version of “Facts & Figures,” a quick reference guide containing comprehensive general technical information for aggregate and recycle producers, operators, engineers and maintenance personnel of KPI-JCI or equivalent crushing, screening, washing and material handling equipment. The 216-page, pocket-sized book is the fourth edition since Kolberg Pioneer Inc. began producing it in 1988. The guide’s roots trace back more than 50 years ago, however, when Pioneer developed a Facts & Figures book in Minneapolis, Minn. Kolberg began producing an Aggregate Reference Guide during the 1970s, and when Pioneer moved to Yankton, S.D., to join forces with Kolberg, the book was combined into one, known as the Facts & Figures book. The company recently held a Facts & Figures contest on its Facebook page to promote the new release, giving away two iPad 2 tablets to the fans that possessed the oldest

Facts & Figures books. Each participant in the contest received a free copy of the Facts & Figures book and a KPI-JCI and Astec Mobile Screens hat. Lisa Carson, director of marketing of KPI-JCI and Astec Mobile Screens, said the Facts & Figures guides are in high demand due to their usefulness for both those in the field and those selling equipment. “These pocket-sized guides are able to go everywhere and answer questions on the spot that helps minimize downtime and lets producers make the best decisions possible to make their operations most profitable,” Carson said. “The guides have helped elevate KPI-JCI and Astec Mobile Screens into the industry leader it is today.” To request a free copy of KPI-JCI and Astec Mobile Screens’ Facts & Figures book, contact Kate Shoemaker at 605/6689311, ext. 2212. For more information, visit www.kpijci.com.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 4, 2012 • Page 49

Don’t D on’t ssettle ettle ffor or lless ess When it comes to crushing, contractors need the W same quality, production and product support as the largest quarry or mining company. Metso has a full range of Lokotrack LT Series jaw, cone and impactor plants designed specifically for o contractors. Lokotracks work longer, more efficiently, and with more uptime in demanding contract crushing and recycling jobs. Get the confidence, true value and lower liffetime costs that come with owning a Lokotrack. Contact your local Metso distributor today! www.metso.com

Lokotrack LT106 jaw plant

BUTLER MACHINERY CO.

RB SCOTT COMPANY INC.

www.butlermachinery.com

www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9292 Fax: 715-832-7767

3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46th St. Grand Forks, ND 58201 701-775-4238 1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 4950 E Highway 12 Aberdeen SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. Louise Ave. Sioux Falls, SD 57107 605-336-3010

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuilders machinery.com 1001 S. 7th St. Trafficway Kansas City, KS 66105 913-371-3822 Fax: 913-371-3870 4115 S. 90th St. Omaha, NE 402-331-9200

CENTRAL SERVICE & SUPPLY, INC. www.centralsands.com 1701 SE Hulsizer Rd. Ankeny, IA 50021 515-964-8600 Fax: 515-964-3314

5601 Fletcher Ave. Lincoln, NE 402-325-0447 4949 Juergen Rd. Grand Island, NE 308-384-2620

AIS CONSTRUCTION EQUIPMENT CORP. 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Fax: 517-321-4191 www.aisequip.com Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Fax: 616-538-0449 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 Fax: 586-727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 Fax: 989-777-1583 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 Fax: 231-267-5257 West Detroit, MI 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway Springfield, IL 62702 217-789-7711 Fax: 217-744-7314

4670 Crossroads Industrial Dr. Bridgeton, MO 63044 314-291-1330 Fax: 314-291-8050

220 E. Frontage Rd. Bolingbrook, IL 60440 630-739-7474 Fax: 630-739-9443

4110 I-70 Drive Southeast Columbia, MO 65201 573-814-0083 Fax: 573-814-0087

18210 Beck Rd. Marengo, IL 60152 815-923-4966 Fax: 815-923-4973

3364 Percy Drive Cape Girardeau, MO 63702 573-334-5252 Fax: 573-334-1887

1505 Donna Drive Carterville, IL 62918 618-985-3399 Fax: 618-985-2992

701 Industrial Drive Palmyra, MO 63461 573-769-2056 Fax: 573-769-2059

6450 Melton Rd. Portage, IN 46368 219-764-8080 Fax: 219-764-8613

Page 50 • February 4, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” ALTA EQUIPMENT COMPANY www.altaconstructionequipment.com Wixom, MI 248-449-6700

Sterling Hts, MI 586-977-6000

Muskegon, MI 231-798-8754

Zeeland, MI 616-748-4108

Kentwood, MI 616-698-2960

Lansing, MI 517-272-5033

Battle Creek, MI 269-965-1269

Wixom, MI (Cons. Division) 248-356-5200

Romulus, MI 734-641-8238 Saginaw, MI 989-752-9400

Byron Center, MI 616-878-7450

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com Louisville, KY 502-491-4000 Evansville, IN 812-425-4491 Corbin, KY 606-528-3700 Lexington, KY 859-259-3456 Stanville, KY 606-478-9201

Paducah, KY 270-444-8390 Indianapolis, IN 317-872-8410 Ft.Wayne, IN 260-489-4551 South Bend, IN 574-233-8770

HOWELL TRACTOR & EQUIPMENT LLC www.howell tractor.com Gary,IN 800-852-8816 Peru, IL 800-342-6072

GIBSON MACHINERY LLC www.gibson machinery.com Oakwood Village, OH 440-439-4000 Pittsburgh, PA 724-695-5000

ROLAND MACHINERY CO.

THE VICTOR L. PHILLIPS CO.

www.rolandmachinery.com Franksville, WI Carteville, IL 262-835-2710 618/985-3399

www.vlpco.com Wichita, KS Kansas City, MO 800-878-3346 800-878-9290

ROAD MACHINERY & SUPPLIES Savage, MN 800-888-9515

Milan, IL 800-633-9114

Bridgeton, MO 314-291-1330

Depere, WI 920-532-0165

Joplin, MO 800-878-8223

Topeka, KS 800-878-4345

Des Moines, IA 800-555-1445

Iron Mountain, MI 800-888-9565

Columbia, MO 573-814-0083

Deforest, WI 608-842-4151

Garden City, KS 800-511-1435

Cedar Rapids, IA 800-616-6615

Duluth, MN 800-888-9535

Cape Girardeau, MO 573-334-5252

Eau Claire, WI 715-874-5400

Brookline Station, MO 800-955-2729

Sioux City, IA 800-633-9104

Virginia, MN 800-752-4304

Palmyra, MO 573-769-2056

Schofield, WI 715-355-9898 Escanaba, MI 906-786-6920

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 4, 2012 • Page 51

CRUSHING EQUIPMENT, PARTS & SERVICE Terry Hennessey 800-845-9188 terry.hennessey@fabickcat.com

Fenton, Missouri 800-845-9188 www.fabickcat.com

Go to www.fabickcat.com for a complete listing and description of our new and used equipment.

Portable Screen Telsmith offers an array of inclined and horizontal portable screening plants that have been designed to meet the variety of challenges encountered in different applications. Whether you need the ruggedness required when scalping large stone, to the finesse necessary for finish sizing, Telsmith has an efficient portable solution to meet your site needs.

Model TJ3258 - Jaw Crusher Designed around the Telsmith 3258 hydraulic jaw crusher, the TJ3258 is specifically designed to deliver high production while processing hard, abrasive stone. With a large crusher gape and width, the 3258 processes larger feed and has greater crushing capacity than competitive models. The 3258 jaw also incorporates unique hydraulic features proven to reduce maintenance and downtime to an absolute minimum: • Hydraulic Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Chamber Clearing: safely clears the crusher in minutes for increased uptime.

Model TI6060 - Impact Crusher Featuring the heavy duty Telsmith PA6060 Primary Impact Crusher, this plant is engineered for maximum productivity while processing less abrasive quarried stone or concrete recycle. Capable of receiving 40” stone or 58" wide concrete slabs, the PA6060 has proven to be a dependable, low cost producer. Advanced hydraulic features built into the PA6060 reduce maintenance and downtime providing increased production: • Hydraulic Apron Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Tilt Feed Plate: safely clears bridging in minutes for greater uptime.

DID YOU KNOW? For over a hundred years, Telsmith has designed and manufactured in the United States of America.

Crushers should operate for decades. With that standard in mind, Telsmith designs, manufactures and services a range of jaw, cone and impact crushers as well as single-deck to quad-deck screens.

Page 52 • February 4, 2012 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Prro en Perfform ormance mance

JW JONES COMP PANY LLC ROADBUILDERS LY Y CO. MACHINERY & SUPPL 1001 S. 7th St. 2468 S State Road 67, Kansas City, KS 66105 Paragon, IN 46166 (913) 371-3822 1-800-342-5491 roadbuildersmachinery.com roadbuildersm machineryy.com jjwjonescompany.com jwjonescompany j p y.com Nebraska, Kansas & Indiana, Indiana, Illinois & We esterOv n Mer issouri W ester e K entuco kr ys.. Call Over 20 North Distributors. O North American rican ca an a Distributo Dinstr ributo C Western Kentucky

TITAN MACHINERY

for for

15125 South Robert Trail Rosemount, Minnesota 55068 1-800-642-4441 titanmachinery.com titanmachiineryy.com North Nor th & South uth Dakota, Dak kota, ota, Wisconsin isconsin your yoMinnesota, ur closest. l t.W

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 4, 2012 • Page 53

Page 54 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Burris Equipment Co. 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 Fax 847/336-2697

IT TAKES GROUNDBREAKING TECHNOLOGY TO BE THE BEST AT GROUNDBREAKING.

27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 Fax 815/363-4109

The New Kubota KX71-3 Compact Excavator Breakout force: 3,285 lbs. (arm) 6,350 lbs. (bucket) The most in its class 27.5 HP Kubota diesel engine Variable displacement pumps 18" tailswing overhang Large operator space Digital diagnostics Double-opening bonnet

10351 W. Laraway Rd. Frankfort, IL 60423 815/464-6650 Fax 815/464-6951

EVERYTHING YOU VALUE

www.kubota.com

Doosan Portable Power Tier IVi Mobile Generators Available Doosan Portable Power has released four models in its Tier IV Interim (Tier IVi) mobile generator portfolio. The G150, G190, G240 and G325 mobile generators are new to the lineup of 10 Doosan models ranging from 25 to 570 kVA and became available Dec. 1, 2011. These models complete Tier IVi development from Doosan Portable Power for products with power ratings greater than 174 hp (130 kW) and have been designed for the implementation of Tier IV final (Tier IVf) technologies effective in 2014. In addition, Doosan is finalizing the development of new G70, G85 and G125 models to meet the 2012 Tier IVi regulations for the respective power ratings. New G25 and G45 models will meet Tier IVf regulations required in 2013. “Doosan Portable Power has been developing emissions related product innovations since 1996 with dedicated engineering and design,” said Todd Howe, manager of global generator products of Doosan Portable Power. “We proudly premiered the world’s first 2011-compliant Tier IVi generator at ConExpoConAGG. These new Tier IVi models have been substantially redesigned from their predecessors to incorporate numerous customer focused innovations in addition to achieving emissions compliance.” All features of the new generators are designed to maximize the operator experience. Controls are simplified for easy operation, connection panels are made more accessible

The G150, G190, G240 and G325 mobile generators are new to the lineup of 10 Doosan models ranging from 25 to 570 kVA and became available Dec. 1, 2011.

for improved safety and convenience, and sound levels are reduced between 2 to 5 dBA to ensure quieter operation. Longer runtime — exceeding 24 hours at any load factor — also is achieved with these new generators due to increased onboard fuel capacity. The operator-preferred analog control panel has been enhanced with large, brightly lit meters for at-a-glance monitoring. And the onboard engine diagnostic display panel from Doosan now includes the controls and indicators required to operate and maintain the aftertreatment regener-

ation system that is a key component of the new Tier IVi technology to meet engine emissions. New features, such as the addition of a voltage selector switch on the G240 and G325 simplify the set-up and connection of the machines on the job site. Dual frequency capability comes standard on the Tier IV generator portfolio to expand the versatility of the machines to power 50Hz applications with the simple flip of a switch, according to the manufacturer. All current Doosan mobile generator models with Tier II or Tier III engines continue to be available through the use of the federal Environmental Protection Agency (EPA) Transition Program for Equipment Manufacturers (TPEM) — commonly known as the Flexibility Provision — until each successive tier change is complete. All Doosan Portable Power generators are designed and manufactured in America at the Doosan Portable Power global headquarters in Statesville, N.C., an ISO 9001 facility. For more information, visit doosanportablepower.com.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 55

These workmates put more work within reach. Name the job and there’s a 310SJ or 410J Backhoe Loader to help you get it done. You’ll benefit from uptime-enhancing features such as advanced diagnostic monitors, solid-state electronics, and an improved cooling system. Other advantages include ground-level service points, low maintenance costs, smooth and responsive hydraulics, and best-in-class resale value. Go for the Total Machine Control (TMC) and tool carrier options and take on even more work. To put a 310SJ or 410J Backhoe Loader to work for you, give us a call.

www.holtequipment.net Louisville, KY 40223 502/253-3721 1-800/507-9705 London, KY 606/862-8447 1-877/231-7151 Bowling Green, KY 42101 270/842-3400 1-866/528-9699 Richmond, KY 859/623-2030 1-800/463-8722

3600 North Grand River Ave Lansing, MI 48906 517/321-8000 Fax: 517/321-6275 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616/538-2400 Fax: 616/538-0449 Northeast Detroit 65809 Gratiot Ave Lenox, MI 48050 586/727-7502 Fax: 586/727-7311 Saginaw 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989/777-0090 Fax: 989/777-1583

Traverse City 8300 M-72 East Williamsburg, MI 49690 231/267-5060 Fax: 231/267-5257 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248/437-8121 1-800/457-8121

www.murphytractor.com

www.westsidetractorsales.com Naperville, IL 60563 630/355-7150 Fax: 630/355-7173

Indianapolis, IN 46219 317/544-3411 Fax: 317/544-3420

South Holland, IL 60473 708/331-6362 Fax: 708/331-7334

Lafayette, IN 47905 765/447-6933 Fax: 765/448-9038

Rockdale, IL 60436 815/730-9011 1-800/937-3355 Fax: 815/730-9036

Bloomington, IN 47403 812/333-9677 Fax: 812/333-9731

Rockford, IL 60012 815/961-3160 Fax: 815/965-1810 Wauconda, IL 60084 847/526-7700 Fax: 847/526-3565

South Bend, IN 46619 574/232-1461 Fax: 574/233-3324 Fort Wayne, IN 46825 260/482-8576 Fax: 260/483-4057

Park City, KS 800/262-0139

North Platte, NE 800/894-7060

Cincinnati, OH 800/844-3734

Dodge City, KS 800/794-0172

Grand Island, NE 800/868-4017

Vandalia (Dayton), OH 800/233-4228

Great Bend, KS 800/264-4056

Lincoln, NE 800/416-5518

Lima, OH 800/423-7445

Omaha, NE 800/416-5095

Canton, OH 866/235-0438

Waterloo, IA 800/772-2019

Brunswick, OH 800/716-9796

Des Moines, IA 800/822-2212

Painesville, OH 866/800-1398

Fort Dodge, IA 800/362-2487

Poland (Youngstown), OH 866/503-7259

Sioux City, IA 800/352-4693

Cranberry Twp, PA 724/776-3636

Columbus, OH 800/222-2010

Delmont, PA 724/837-4500

Topeka, KS 800/279-6087 Ulysses, KS 800/472-9238 Kansas City, MO 888/306-3434 Springfield, MO 888/306-2656 Gering, NE 800/205-6784

Page 56 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby Smith Machinery Inc. 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700

6715 W. Reno Oklahoma City, OK 73127 405/495-7820 Kansas City, KS 913/850-6300 877/851-5729

Cleveland Crane & Shovel Sales, Inc. 26781 Cannon Road Cleveland, OH 44146 440/439-4749 800/362-8494 Fax: 440/439-2177 aforepaugh@ craneandshovel.net www.craneandshovel.net

Walter Payton Power Equipment LLC 930 W 138th Street Riverdale, IL 60827 708/656-7700 Fax: 708/532-1273 25210 Brest Road Taylor, MI 48180 734/947-9250 Fax: 734/947-9260

920 S State Road 39 Lebanon, IN 46052 765/482-4145 Fax: 765/482-4928 2126 Glenview Drive Evansville, IN 47720 812/422-6912 Fax: 812/422-6982

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 57

Howell Tractor 2770 May Road Peru, IL 61354 800/342-6072 Fax: 815/224-2538 480 Blaine Street Gary, IN 46406 800/852-8816 Fax: 219/977-4220

DEALER IMPRINT IMPRINT AREA AREA

Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive Morris, IL 60450 815/941-1900 Fax: 815/941-1486

Mid Country Machinery 3478 5th Ave South (Bus. Hwy 20) Fort Dodge, IA 50501 800/206-5936 4734 Sergeant Rd. (Hwy 63) Waterloo, IA 50701 319/234-8710 106 8th Street Sergeant Bluff, IA 51054 712/943-4470

Custom Truck & Equipment www.customtruckandequipment.com 7701 E. 24 Highway Kansas City, MO 64125 800/861-1065 816/241-4888 Fax: 816/241-8826 2121 Stephens Blvd. Joplin, MO 64804 417/659-8969 Fax: 417/659-8871

HISTORY KCMA’s parent company, Kawasaki Heavy Industries, has over 100 years of experience providing technology solutions. Kawasaki Heavy Industries is a global supplier of innovative engineering with a portfolio ranging from jet turbines to bridge design to construction equipment.

TECHNOLOGY Kelbe Brothers Equipment Co, Inc. www.kelbebros.com 12770 W. Silver Spring Drive Butler, WI 53007 262/373-2151 Fax: 262/373-2102 4621 Dutch Mill Rd. Madison, WI 53716 608/221-8300 Fax: 608/221-0610

Kawasaki is the most experienced manufacturer of articulated wheel loaders in the world. Since introducing our first models in 1962, we have maintained a leadership position in technology, service, and support. Backed by the massive resources of Kawasaki Heavy Industries, KCMA Corporation’s focus on wheel loaders translates into real benefits for you and

your business. Kawasaki articulated wheel loaders incorporate innovative design features coupled with extensive knowledge and experience gained from real-world applications. Kawasaki pioneered Z-Link design to provide unmatched utility, high breakout force and efficiency in its machines.

INNOVATION, Technology in Motion Kawasaki engineers work with end users all over the country to access and review their wheel loader needs. With in-house special application engineers, Kawasaki is capable of responding to new industry demands quickly with comprehensive solutions. Kawasaki operates its own rebuild center. This fully equipped facility is

staffed by skilled technicians with the in-depth knowledge and specialized equipment. Kawasaki provides a totally focused approach to support your business. From carefully designed programs and services to engineered special applications options, your Kawasaki wheel loader is ready to tackle the most demanding applications and environments.

2140 Barrett Park Drive, Suite 101 Kennesaw, Georgia 30144 770-499-7000 www.kawasakiloaders.com

Page 58 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Dealers, Manufacturers Meet Up at Annual AED Event

Throughout the day, speakers representing various aspects of equipment distribution presented informative seminars to the AED membership.

Curt Peterka (L) and Andrew Gillman of The RoadConnection.org describe their organization’s plans to increase awareness of the importance of infrastructure construction and repair.

AED from page 12

(L-R): Broce Brooms, manufactured in Oklahoma, are represented at this year’s AED by Dave Krason, Jim Cornelsen, and John Mortin.

Tom Barry (L) and Steve Cohen of The Screen Machine rated this year’s CONDEX a big success.

(L-R): Doreen Putnam, Ron Robertson, John Myers, James Jarrell, Angela Larson, Robert Doyle, and Mike Sims, all of Woods Equipment Company, represent a complete line of construction buckets, couplers and thumbs, for all types of heavy equipment applications.

Tom O’Leary and Monique Alexander represent Corface North America, a full-service commercial collection agency, which has been a proud member of AED for many years. All of their collections are entirely contingent, so if they don’t collect, they don’t get paid.

Rogers Trailers is one of the oldest and most trusted names in the manufacturing of lowboy trailers. Fielding questions from this year’s attendees is Bill Brenoel (L) and Jay Kulyk.

Trucks & Trailers

SECTION

Pages 59-63

Cat Offers Engine Overhaul Kits for Medium-Duty Apps Cat precious metals on-highway engineoverhaul kits are now available for mediumduty engines, including the Cat 3126B, 3126E and C7 with serial-number prefixes KAL, WAX and SAP. Included among the new overhaul kits are three for varying levels of in-frame overhaul (bronze, silver and gold), as well as two for out-of-frame overhaul (platinum plus and titanium). Also available is the new HEUI (hydraulic electronic unit injector) fuel-system overhaul kit. These six new kits, designed to provide the exact level of service required to economically extend the life of Cat medium-duty engines, are available through Cat dealers and carry factory-backed warranties. Bronze: The bronze in-frame overhaul kit is a low-cost, basic repair option that includes main, rod and thrust bearings, a complete package of seals, gaskets, retainers, plugs and hardware, as well as valueadded components, including Cat oil and fuel filters, exhaust-manifold sleeves and thermostats. Silver: Another basic in-fame-overhaul

kit, the silver level adds six pistons, rings, block, Reman piston packs, Reman cylinder HEUI Fuel System Kit: This kit can be head, valve train, front housing, Reman used as stand-alone repair option to provide pins and retainers to the Bronze kit. Gold: The gold in-frame-overhaul kit crankshaft, Reman camshaft, Reman oil a significant mid-life performance improvement, or in combination with provides an added measure the three in-frame overhaul of convenience and labor kits. The kit also provides savings by including with the hold-down bolts, seals and bronze kit six Cat remanufacO-rings. tured (Reman) piston packs With Cat precious metals — each pack with the piston, on-highway engine-overconnecting rod, rings, pin and haul kits, users of Cat truck retainers pre-assembled. engines are assured of genPlatinum Plus: The platuine, Cat quality compoinum plus kit allows an nents that are designed to extensive out-of-frame overexacting specifications and haul — with no need to incorporate the most recent machine the original block engineering improvements, — by starting with the gold materials and manufacturing kit and adding a bare block, expertise, according to the Reman cylinder head, manufacturer. For added Reman HEUI pump, six Cat precious metals on-highway engine-overhaul kits are now avail- assurance, precious metal Reman injectors, Reman oil able for medium-duty engines, including the Cat 3126B, 3126E and C7 overhaul kits are protected pump and IAP — injection with serial-number prefixes KAL, WAX and SAP. by a one-year parts warranactuation pressure — sensor. pump and Reman oil cooler, plus six Reman ty; extended coverage is available with the Titanium: The titanium kit starts with the injectors, Reman HEUI pump and IAP senprecious metal ESC plan. basic bronze package, then adds a Reman For more information, visit www.cat.com. long block (pre-assembled with Reman sor.)

Transcube Transportable Fuel Tanks Are DOT Approved Transcube’s line of transportable fuel tanks are DOT approved for road transportation and UL 142 certified for safe diesel fuel storage. The double-walled tanks provide 110-percent secondary containment of the inner container’s total capacity to eliminate the risk of spills and contamination, making them ideal for equipment and power rental fleets, fuel suppliers and end users working in construction, mining, agricultural and offshore applications. Internally baffled to prevent the surge of fuel during transport, Transcube tanks have DOT approval for transportation of diesel fuel, unlike traditional fuel

tanks that are not designed for traveling on the road. This gives the units the versatility to be deployed to remote locations while full of fuel as well as the ability to be removed from a site with fuel still inside, according to the manufacturer. Models in the Transcube line include the 05TCG, 10TCG, 20TCG and 30TCG, offering capacities of 132, 264, 528 and 792 gal. (500, 1,000, 2,000 and 3,000 L), respectively. The tanks are designed with an inner fuel container and an outer wall that provides 110-percent integral secondary containment, in contrast to traditional tanks that require a sepa-

rate containment pan. To eliminate the risk of accidental spillage, the tanks have no bottom or side exterior outlets of any kind. All fill ports, pumps, fittings and connections are housed at the top of the tank within the secondary containment area. The tanks are capable of feeding up to three generators and refueling equipment at the same time. To prevent theft or tampering, access to fuel and pumping equipment is secured within the unit’s lockable cabinet. The tanks are equipped to make handling and maneuverability simple regardless of job site logistics. Forklift pockets are accessible on all four sides of the tank, while full

load lifting eyes on the top corners allow the tank to be lifted, raised or lowered by a crane while full of fuel. Additionally, the rectangular shape of the tanks gives them the ability to be stacked — as many as two high when full and three high when empty — thus reducing the required space for storage and making transportation more economical. Maintenance and inspection of the tanks is simple due to a removable inner tank, which allows a person to easily access and clean the inner chamber and compartments. Featuring rugged, all-steel construction and a galvanized

bumper strip around the upper perimeter for added protection, the tanks are backed by a 5-year warranty. Transcube offers several optional pumps and fittings, including electric and manual transfer pumps, engine-powered fuel pumps, aviation fuel systems, filters, supply and return hoses and connections, hose reels, and digital and mechanical flow meters. Tanks and fittings also can be supplied with custom colors to match a user’s existing fleet of equipment. For more information, call 203/847-4300 or visit www.transcube.net/us.

Page 60 • February 4, 2012 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Talbert Touts Its 55-Ton Multi-Purpose Telescopic Trailer The multi-purpose Talbert 55-ton (50 t) hydraulic detach the easy loading and off-loading of non-operating equipTalbert SSTA 5053 Trailer telescopic trailer adapts to a variety of loads as its telescopIdeal for the heavy-duty towing and recovery industry, ment — particularly pieces with lower ground clearance. ic deck extends from 30- to 50-ft. (9 to 15 m) — giving the SSTA 5053 is loaded with more standard features (over The Talbert SSTA 5053 is equipped with a 15,000-lb. haulers what they need, when they need it — and offering conventional units) in a base model while delivering cost- (6,804 kg) planetary winch standard. Due tµo its direct drive the advantages of transporting large selfsystem, the planetary winch is presupporting loads such as steel tanks, large ferred over the traditional worm gear generators and much more. Furthermore its design seen on many competitive 20-in. (51 cm) loaded deck height is preunits — and it offers up to twice or ferred over the 22- to 24-in. (56 to 61 cm) more the loading speed over the loaded deck heights seen on conventional worm gear winch, according to the units, according to the manufacturer. manufacturer. Its spread axle capabilities allow a 2 + 2; Talbert’s planetary winch is operor a 3 + 1 configuration; and its tandem axle ated via a multi-function wireless features connections for a third axle that can remote, allowing one operator to load be flipped or removed. The unit also is and steer a piece of non-operational equipped with connections for a future equipment without having to leave fourth axle. Additionally, this Talbert telethe trailer. scopic trailer is engineered with a pinned The Talbert SSTA 5053 is comand hinged gooseneck extension that can be prised of a T-1 and 80K steel beam flipped. The ability to flip or remove the constructed framework; 4-in. (10 cm) third axle, and the capability of flipping the I-beam cross members on 9-in. (23 gooseneck extension delivers key advancm) centers; and 1-1/2 in. (3.8 cm) tages during empty travel by allowing The multi-purpose Talbert 55-ton (50 t) hydraulic detach telescopic trailer adapts to a apitong flooring. Among many other haulers to retract to an overall trailer length variety of loads as its telescopic deck extends from 30- to 50-ft. (9 to 15 m). standard features, the SSTA 5053 includes air-ride suspension; a twothat is less than 53 ft. (16 m). Among standard features, the Talbert 55-ton telescopic effective versatility in a variety of applications. With a 50- speed landing gear, hub-piloted steel disc wheels, and both trailer is equipped with air-ride suspension; Dura-Bright ton (45 t) capacity; a 41-ft.-6-in. (12.6 m) lower deck and side and center tie-down slots for greater loading ease and aluminum outer wheels; strobe lights at the rear of each 53-ft. in overall length, the SSTA 5053 traveling axle trailer application flexibility. For more information, call 800/348-5232 or visit axle; and a battery back-up that powers the lighting package features a 6-degree loading angle and a 14-degree dumping when the trailer is disconnected from the truck cab. angle making it suitable as a general purpose trailer, or for www.talbertmfg.com.

FT-80-3 Tilt Slide Axle Now Available at Felling Trailers

Primary applications for Felling’s FT-80-3 TSA include moving 40 ft. (12 m) containers and towing an array of equipment. The FT-80-3 TSA runs on two “V” rollers and six flat rollers and has all functions available on a remote control option.

Felling Trailers has again expanded its product line with the FT-80-3 tilt slide axle (TSA). Primary applications for Felling’s FT-80-3 TSA include moving 40 ft. (12 m) containers and towing an array of equipment. The FT-80-3 TSA runs on two “V” rollers and six flat rollers and has all functions available on a remote control option. It is available in three load capacities and has a 6 to 7 degree load angle. Its cylinders are contracted when in transport position and extend to slide the axles forward so that they are protected from salt and other elements.

Standard Equipment: • Load Capacity: 70,000 lb. (31,751 kg) FT-70-2 TSA; 80,000 lb. (36,287 kg) FT-80-3 TSA; or 100,000 lb. (45,359 kg) FT-100-3 TSA • (2 or 3) 25,000 lb. (11,340 kg) axles • Brakes: ABS air brakes • 17.5 in. (44.5 cm) tire size • Tie downs every 2 ft. (.6 m) • Suspension — moves forward 16 ft. (4.8 m) • 6 to 7 degree load angle • Deck width: 102 in. (259 cm) standard (wider deck

width optional) • Deck height at knife edge: 39.5 in. (100 cm) • White oak 2 in. (5 cm) nominal deck • 9 in. (22.8 cm) standard cross beams • D.O.T. approved LED lighting with sealed wiring harness • HD Industrial urethane paint and primer with threeyear paint warranty • Five-year limited structural warranty For more information, call 800/245-2809 or visit www.felling.com.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 4, 2012 • Page 61

Scharber & Sons, Inc. www.westsidetractorsales.com 2170 South Yost Ave. 1400 W. Ogden Ave. Bloomington, IN 47403 Naperville, IL 812-333-9677 630-355-7150 Fax: 812-333-9731 310 W. 162 St. Rt. 6 5400 Industrial Rd. South Holland, IL Fort Wayne, IN 46825 708-331-6362 260-482-8576 Fax: 260-483-4057 3110 Prairie Rd. 7355 East 30th St. Rockford, IL Indianapolis, IN 46219 815-961-3160 317-544-3411 1560 North Old Rand Rd. Lafayette, IN 47905 Wauconda, IL 765-477-6933 847-526-7700 Fax: 765-448-9038 600 Walnut Ct Rockdale, IL 815-730-9011

South Bend, IN 46619 574-232-1461 Fax: 574-233-3324

13725 Main Street Rogers, MN 55374 763-428-4107 Fax: 763-428-2700 www.scharbers.com

949 3rd Ave. Windom, MN 56101 507-678-2752

Ditch Witch of North Dakota 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266 Fax: 763-422-3949 3021 West 133rd Shakopee, MN 55379 952-445-6310 Fax: 952-496-0263 23580 Highway 55 Loretto, MN 55357 763-479-8200 Fax: 763-479-8201

Kentucky 13090 Aiken Rd. Louisville, KY 40223 800-507-9705

1015 Highway 212 West Norwood Young America, MN 952-467-2182 Fax: 952-467-3259

2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551 Fax: 701-663-0692

4233 Russellville Rd. Bowling Green, KY 42101 866-528-9699 140 James Lewis Rd. London, KY 40744 877-231-7151 3279 Lexington Rd. Richmond, KY 40475 800-463-8722 www.holtequipment.net

1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 Fax: 701-282-3636

1929 E. Madison Ave. Mankato, MN 56001 507-387-7376 Fax: 507-387-7399 901 Parker Ave. W. Dassel, MN 55325 877-570-2740 www.farmriteequip.com

2216 N. Greenbay Rd. Waukegan, IL 60087 847-336-1205 10351 W. Laraway Rd. Frankfort, IL 60423 815-464-6650 27939 W. Concrete Dr. Ingleside IL 60041 815-363-4100 www.burrisequipment.com

Page 62 • February 4, 2012 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

$pring $aving $pecials #1 Chrysler Corp. Commercial Dealer in Minnesota

9 Cabs & Chassis in Stock Now!

2012 Ram Cargo C/V

2012 Ram 3500 STD

2011 Ram 1500 HD STD

V/6, Auto Trans., PW, PL, T/Cruise Cargo Floor, 25 MPG, Stk# N0930

Cab & Chassis 4x4, Hemi, Auto Trans, DT PL T/C, A/C, HD Package, Reading Service Body Class 5 Hitch, Stk# NO060

Cab, Hemi, T/Tow, Auto, A/C, Long Box, Anti Spin HD Package, Stk# L1227

MSRP $24,360

FURY MOTORS South St. Paul, Minnesota Truck Master Dick Reineck 651.251.8214 direct • rreineck@furymotors.com Commercial Specialist Keith Babin 651.324.9510 direct • kbabin@furymotors.com

MSRP $24,700

MSRP $43,011 We Deliver!

$avings $ale $21,999

$avings $ale $35,999

$avings $ale $17,909

2011 Ram 3500

2011 Ram 4500 STD

2011 Ram 3500

2012 Ram 2500 Larame

Cab & Chassis, H/O Cummins, Auto Trans., PTO, 4x4, A/C, 84” C/A HD Towing, Stk# L0377

Cab & Chassis, 4x4, H/O Cummins, MAXTON, Auto Trans, PTO, PW, PL, T/C, A/C, Rugby Aluminum Body & Toolbox, Hiniker 9’ Plow, Stk# LO205

Cab & Chassis, Crew Cab, H/O Cummins, Auto Trans., 4x4, PW, PL, T/Cruise, P Seat & More, Stk# L0742

Crew Cab & Chassis 4x4, H/O Cummins, Auto Trans, PTO, PW PL TK A/C, Keyless, Much More, All Wheels Aluminum, Hauler & 2 5/16 Ball Hitch & Class 5 Hitch, Stk# L0002

Crew Cab Dually SLT, Cummins H/O, Auto Trans., PW, PL, T/Cruise, A/C, P Seat, 4x4, BU Camera and More, Stk# L1198

Crew 4x4, Leather, Max Tow, H/O Cummins, Snow Plow Pkg. “No Urea”, Stk# N0161

MSRP $42,085

MSRP $52,405

MSRP w/Plow $62,585 MSRP w/out Plow $57,199

$avings $ale $33,499

$avings $ale w/Plow $50,999 w/out Plow $46,699

MSRP $56,482

MSRP $54,550

MSRP $60,750

$avings $ale $41,999

$avings $ale $46,999

$avings $ale $44,999

$avings $ale $46,999

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 4, 2012 • Page 63

Vermeer Sales & Service

Farm-Rite Equipment Inc.

1675 126th St. West Burnsville, MN 55337 952-890-6144 Fax: 952-882-2980 www.vermeerofminnesota.com

901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 www.farmriteequip.com

Midwest Trailers Plus, Inc.

K.C. Bobcat

548 29th St. West Des Moines, IA 50265 515-223-8463 Toll Free: 888-560-2787 Fax: 515-223-6446 www.midwesttrailersplus.com

2209 W. 40 Highway Blue Springs, MO 64015 800-697-4228 816-229-7631 Olathe, KS 800-598-4228 Platte City, MO 800-984-3001

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 • Fax: 630-627-8711 Big Rock 47W247 US Highway 30 Big Rock, IL 60511 630-556-3111 • Fax: 630-556-3749 Bolingbrook 250 East Frontage Road Bolingbrook, IL 60440 630-739-7770 • Fax: 630-739-7699 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 • Fax: 312-421-3502

Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 • Fax: 708-597-9945 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 • Fax: 815-385-2975 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 • Fax: 219-865-0269 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 • Fax: 847-526-9448 www.McCannOnline.com

Titan Machinery Shakopee Division 6340 Hwy 101 Shakopee, MN 55379 952-445-5400 • 800-795-9274 Fax: 952-445-0365 Duluth Division 4311 Haines Rd. Hermantown, MN 55811 218-727-3038 • 800-795-0117 Fax: 218-727-2827 Rogers Division 14375 James Rd. Rogers, MN 55374 763-428-5099 • Fax: 763-428-5051 Industrial Division N1626 Wuensch Rd. LaCrosse, WI 54601 608-788-1025 • 800-780-1025 Fax: 608-788-1027

Page 64 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Bobcat’s E55 Features ‘Finger-Tip’ Control for Boom Swing The E55 has an operating weight of 12,478 lbs. (5,660 kg), an overall width of 77.2 in. (196 cm) and is powered by a 48.8 hp (36 kW) turbocharged diesel engine that is interim Tier IV compliant.

The E55 conventional tail swing compact excavator has an operating weight of 12,478 lbs. (5,660 kg), an overall width of 77.2 in. (196 cm) and is powered by a 48.8 hp (36 kW) turbocharged diesel engine that is interim Tier IV compliant. The unit’s 13.4 in. (34 cm) of tail overhang helps it deliver increased lift capacity and slew performance in the most demanding applications. The E55 is standard equipped with a TOPS/ROPS certified cab, including full climate control (HVAC), and a deluxe high-back cloth suspension seat with retractable seat belt. Additional amenities in the “radio ready” cab include 12V power port, adjustable armrests, lockable tool-

box and a convenient beverage holder. Within the operator’s area, the E55 features convenient “fingertip” control for boom swing and auxiliary hydraulics functions. Large travel pedals fold up to provide more floor space while flushmounted floor mats make cleanup easier. A keyless start system that discourages theft and vandalism is available as an option. The E55 comes with an autoidle feature which, if activated by the operator, automatically returns the engine to idle if excavator functions are not used for a period of four seconds, saving fuel and reducing job site noise. The engine automatically returns to the preset throttle position as soon

as the operator starts working again. For precise engine speed adjustments, a new easy-to-use rotary knob has been added to the controls. As with all other M-Series compact excavators, a load-sensing piston pump and closed center valve system provide precise control of the machines travel and work-group functions. The E55’s hydraulic system delivers “loaded” cycle times and a 9,442 ft.-lb. of bucket breakout force for productivity. Work-group cylinders offer end-of-stroke cushioning for smooth operation. An automatic, integrated slew brake holds loads still and steady on slopes for more accurate placement. The need for the operator to

manually engage the slew brakes during transport is eliminated, making it easier to load and position the machine for transport. Like all Bobcat M-Series compact excavators, the E55 features an X-frame undercarriage that provides impressive ground clearance and readily sheds debris for reduced cleanup time. Drive motor covers are inset within the motor wrap-arounds to protect them from potential damage. Integrated into the undercarriage, convenient tie down points simplify trailer loading for transport, according to the manufacturer. In addition, Bobcat’s in-track swing frame keeps the swing castings and cylinders within the width of the tracks when digging

in an offset position, helping the operator dig flush against an obstacle. This feature minimizes the chance of inadvertent contact with surrounding obstacles, ultimately reducing operating costs of repair to the machine or adjacent structure. Other popular options for the E55 include “pad-ready” steel tracks, rubber street pads, a hydraulic angle blade, second auxiliary hydraulics, hydraulic clamp and hydraulic X-Change attachment mounting systems for quickly switching between the 16 attachments approved for use on the machine. For more information, visit www.bobcat.com/excavators/.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 65

Page 66 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95 ASPHALT CUTTERS EXTREME SERVICE

Large Overseas Order 10 Extra Units. Retails $3,100 Blowout Special: $2,000 24 Hr. Shipping

Did this ad catch your attention? Color can work for you. Call Construction Equipment Guide 800/523-2200

2002 Bombardier SW48, 100HP Diesel, 473 Hrs, 2955 Miles, Cab & Heat, Tracks are in Great Shape ...........................................$17,500 763/428-4107 2-3 PK

2002 John Deere 250 Open Station, 1810 Hrs, weight kit, KV0250A351153 ...........$12,500 2-3 PK 763/444-8873

3-4 EB

NEW 2008 TEREX 4792, 23 1/2 ton boom truck, 92’ main boom, 26’-44’ jib, front outrigger, block, ball, LMI, 21’ steel bed, mounted on a NEW 2008 Sterling 300 HP Cummins, Cleveland, Ohio........... ........................................................................CALL Call Andy at 216-316-1511 3-4 EB

2002 Kobelco ED 190 Blade Runner, s/n YL02U0117, 6720 Hrs, VERY GOOD CONDITION, 10’2” Arm w/48” Bkt ....................................$65,000 3-4 JM Call David 219-696-5680

2005 Case CX240LC, s/n 241488, 6003 Hrs........... ....................................................................$69,000 3-4 JM Call David 219-696-5680

1991 John Deere 300D, S/N 775834, Open ROPS..........................................................$19,000 Call 502/456-4050 Ask for Melissa or Albert 3-4 EB

2009 Kawasaki 90ZV Loader, w/550 Hrs on Cummins QSM11 Engine, 75%+Rubber, Like New Call 888-9-RACKERS 3-4 JM Ask for Gary or Matt

1994 Dresser 510C, 80 HP, 1.75 yd Bucket, cab, new tires...............................................POR Diesel Machinery 1-800/456-4005 Ask for Don or Herb 2-3 PK

2007 Cat 305CR, 2265 Hrs, s/n HWJ01500, EROPS, Heat, A/C, Hyd. Thumb, Blade ....$41,500 Courts Machinery • 507/678-2752 3-4 PK

Low Hour 2007 Atlas Copco Air Compressors, 6 to Choose From......................Starting at $7,500 3-4 JM Call Brian @ 630-739-7770

2006 Case CX330, s/n N6SAP7025, 5100 Hrs, Cab w/Heat / AC, Boom 21’2”, Arm 13’3”, 31.5” -3Bar Steel Shoes, Control Selector Valve, Kent Coupler .....................................................$137,000 3-4 JM Call Mark @ 630-739-7770

Atlas Copco ROC F9 Hyd Drill, 5046 Hrs on Cat C9 Engine and 2600 Impact Hrs Call 888-9-RACKERS 3-4 JM Ask for Gary or Matt

2005 Cat 305CR, 3042 Hrs, Mitsubishi Diesel Recently Rebuilt, 42 HP, 11,000 Lbs, FOB Salina, Ks................................................$39,500

2006 JCB 3CX Side Shift.....................$54,500

1998 Bandit 12” Capacity Disc Chipper, Model 250XP, 235 Hrs, Perkins Diesel, Exc. Condition $25,900 1-800-950-3321 Wichita, KS E/N 1050707

Call Kirk Nelson at 785-823-6378 www.sellersequipment.com

218-863-6445 Email: attintl@loretel.net 2-3 AP

1991 GROVE RT700B, 40 ton rough terrain crane, 110’ main boom, 32’56’ jib, two winches, block, ball, Deutz diesel engine, very good condition, Cleveland, Ohio........ ........................CALL Call Andy at 216-316-1511

2004 Takeuchi TL140, s/n 21402072, 2999 Hrs, Cab w/Heat & A/C, Faster Hyd Couplers, 76” Tooth Bkt, Tak Controls, Rubber Tracks...............$24,000 3-4 JM Call Steve @ 630-878-8765

3-4 JM

2-3 JM

2008 Bobcat T320, 1498 Hrs, A91, SJC, RSC K-CTL .........................................................$42,000 1-800-950-3321 Tulsa, OK E/N 1019183 2-3 JM

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 67

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

2000 New Holland LS180, 2925 Hrs, Cab & Heat, New Tires, 72” Bkt, 2 Speed ......................$14,300 Call Steve Samosky 262-373-2151 2-3 JM

2005 IR SD-450D, 54” Smooth Drum, 350 Hrs, OROPS, Drum Drive ..................................$28,750 Call Steve Samosky 262-373-2151 2-3 JM

2012 Takeuchi TL230, 155 Hrs, Cab w/Heat & A/C, 67” Bkt, HQA, 71 HP ..........................$42,700 Call Steve Samosky 262-373-2151 2-3 JM

2001 New Holland EC45, Cab w/Heat, Hyd Thumb, Coupler, 24” Bkt, Rubber, 10,320 Lbs ..........$17,900 Call Steve Samosky 262-373-2151 2-3 JM

1986 Cat D5H, OROPS, 6-Way Blade, 75% U/C, 20” Tracks, 119HP......................................$28,750 Call Steve Samosky 262-373-2151 2-3 JM

2008 LInk Belt 330LX, 3560 Hrs, 60” Bkt, Hydraulic Thumb, 24’ Depth, 10’8” Stk.....$139,750 Call Steve Samosky 262-373-2151 2-3 JM

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region.

1983 Pettibone Cary-Lift Model 204, 8000 Hrs, Electric Rotating Pole Baler, 15’ Working Height, 12,000 Lb. Rated Lift Capacity, Wt. 46,000 Lbs, Detroit Diesel ..............................................$85,000 2-3 JM Call Dan 314-393-7249

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

For more information, call Construction Equipment Guide today at 800/523-2200

Canada Hopes United States Employment On the Rise in 28 Reconsiders Keystone Pipeline States, D.C. During December PIPELINE from page 1

Canada is hopeful TransCanada’s pipeline will be accepted on its merits. Andrew MacDougall, a spokesman of Harper, said that Obama explained the decision was not on the merits of the pipeline, but rather on the “arbitrary nature” of the Feb. 21 deadline set by the Republicans as part of a tax measure he signed. Obama said the decision was without prejudice, meaning that TransCanada is free to reapply. The Calgary, Alberta-based company said in a statement that it would reapply and said it expects the presidential permit to be processed in an expedited manner that would allow the pipeline to go online in late 2014. TransCanada CEO Russ Girling said in a statement that plans are already under way to largely maintain the construction schedule of the project. He said the project is too important to the U.S. economy and the Canadian economy for it not to proceed. MacDougall said Harper told Obama that he hoped the pipeline would eventually be approved. The pipeline is critical to Canada, which must have infrastructure in place to export its growing oil sands production from northern

Alberta. The region has the world’s third largest oil reserves with 170 billion barrels of proven reserves. Daily production of 1.5 million barrels from the oil sands is expected to increase to 3.7 million in 2025. Only Saudi Arabia and Venezuela have more reserves. MacDougall said Harper also reiterated to Obama that Canada will look to sell its oil to Asia. Harper previously called Obama’s decision to delay the Keystone XL delay a “wake up call” and said Canada is far too dependent on the United States, which Canada relies on for 97 percent of its energy exports. With the product of oil sands and pipeline delivery to the United States under perennial clouds of environmental objection, Canada wants to ensure a market for the growing production. The price of North American oil also sells for less than oil sold internationally because of a glut of Canadian oil in Cushing, Okla., so shipping the oil to Asia would command a better price. Alberta Premier Alison Redford said Obama’s decision strengthens Canada’s resolve to pursue access to alternative markets.

JOBS from page 1

cent, 500 jobs) tied. New York lost the largest number of construction jobs for the month (minus 11,400 jobs, minus 3.6 percent), followed by Illinois (minus 4,300 jobs, minus 2.2 percent), then Louisiana (minus 2,800 jobs, minus 2.8 percent). Maine, Connecticut, and Mississippi had no change in monthly construction employment. North Dakota ranked first among 29 states and the District of Columbia that recorded construction employment gains from December 2010 to December 2011. The state added 24 percent (5,100 jobs). Indiana ranked second (12.1 percent, 13,600 jobs), followed by West Virginia (10.2 percent, 3,000 jobs) and Tennessee (6.7 percent, 7,200 jobs). California added the largest number of jobs (21,300, 3.9 percent), followed by Indiana (13,600, 12.1 percent). Among the 21 states that lost construction jobs over the past 12 months, New Mexico experienced the steepest decline (minus 13.7 percent, minus 6,000 jobs), followed by Delaware (minus 5.6 percent, minus 1,100 jobs), Georgia (minus 4.6 percent, minus 6,400 jobs) and Alabama (minus 4.4 percent,

minus 3,700 jobs). Georgia shed the largest number of jobs over the year (minus 6,400 jobs, 4.6 percent) with Texas (minus 6,300 jobs, minus 1.1 percent) losing the secondhighest number of jobs; New Mexico was third- worst (minus 6,000 jobs, minus 13.7 percent). North Carolina had no change in construction employment over the year. Association officials said the new state employment figures are consistent with the results of their recently released Construction Hiring and Business Outlook. While more contractors report plans to hire than layoff in 2012, the overall outlook was mixed as contractors expressed concern about funding for a host of publicly funded market segments. “Short term, and shortsighted, cuts in construction investments could undermine chances for a construction industry recovery in 2012,” said Stephen E. Sandherr, the association’s chief executive officer. “It is essential that Congress follow through on reported agreements that may finally allow for enactment of long-overdue aviation and surface transportation legislation.”

Page 68 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CLASSIFIEDS AERIAL LIFTS

EXCAVATORS

Manlifts

Hydraulic Excavators

All Makes & Models Rental, Parts, Service, Training

2005 JD 450C LC, 12'10'' stick, JRB coupler, no bucket, 7212 hrs...............................$93,000.

Modern Equipment Sales & Rental 800/445-4381

AIR COMPRESSORS Compressors Ingersoll-Rand New & Used Parts Modern Equipment Sales & Rental 800/445-4381

ASPHALT EQUIPMENT Asphalt Pavers 2006 Cat AP655-C, stk #C439, hyd screed ext., paving width, 8'2'' to 14'2'', Topcon ready, 235 hours..................$289,900. West Side Tractor 630-355-7150

CRAWLER TRACTORS

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

2005 JD 310G, cab, 4x4, ext., 24'' bucket, very good, 2067 hours...........................$45,500. 2005 JD 310G, cab, 4x4, ext dig, aux hyd, turbo, 24'' bucket, very good, 2766 hours ....................................$45,500. 616-538-2400

West Side Tractor 630-355-7150

Mini Excavators

2004 John Deere 450CLC, cab,

2004 Bobcat 328, ROPS, aux hyds, 1441 hours........$23,500.

A/C, standard dipper, standard track, 6708 hours.........................$139,500. Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com

Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com NH Construction Equipment New & Used Parts & Service

NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381 2007 Gehl 503Z, cab w/heat, 38 HP, 10.600 lbs, zero tail swing, 24'' buclet w/teeth, excellent, 575 hours...$33,100.

Modern Equipment Sales & Rental 800-445-4381

616-538-2400 NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

515-964-8600 1994 JD 450LC, excellent, low hours, bucket, 9643 hours. ....................................$89,500.

2008 Yanmar CBL40A, includes 3 pt. hitch, PTO, loader bucket w/skid plate, great condition, 214 hours ....................................$31,000. 641-628-2000 1998 Case 580SL, cab, A/C, ext-a-hoe, 4x4, aux. hyd., QC, bucket, good condition, 7850 hours..........................$29,500. 913-915-1607 2001 New Holland RG80, canopy, 83HP diesel, 4WD, powershift, 10' moldboard, 1204 hours..................$49,500. Illinois Truck & Equipment 815/941-1483

Crawler Loaders

Logging Equipment

1994 Cat 939, cab, 16'' pads, 50% U/C, new sprockets, MP bucket, good running machine, 3204 hours..................$41,500.

1996 Caterpillar 320L stroke delimber, 31" pads, Balderson attachment, good condition, 7157 hours ...............$92,000 Five Star Equipment Inc. 607/775-2006

FORKLIFTS Industrial Forklifts

616-538-2400 2008 JD 310ST, cab, 4x4, ext dig, ext warranty, 24'' bucket, very good, 3798 hours ....................................$61,900. 2007 JD 410G, ext dig, Pilot controls, 30'' bucet, very good, 2313 hours..................$63,900. 2006 JD 410G, cab, 4x4, ext dig, Pilot controls, 36'' bucket, very good, 2889..........$56,500. 2003 JD 410G, cab, 4x4, ext dig, aux hyd, 24'' bucket, very good condition, 3731 hours ....................................$47,900. 2008 JD 410TJ, cab, 4x4, ext dig, Pilot controls, 30'' bucket, excellent, 2447 hrs.....$73,500.

Backhoe Loaders

FORESTRY EQUIPMENT

Crawler Tractor 2007 JD 450J, LT, cab, A/C, ripper, excellent U/C, very good...........................$63,500. 2010 JD 450J, OROPS, ext. warranty, like new, 447 hours..........................$78,800. 2006 JD 450J, OROPS, LGP, excellent, U/C, very good, 2855 hours..........................$46,500. 2005 JD 450J, OROPS, LGP, sweeps, root rake, very good, 2688 hours..................$44,500. 2005 JD 550J LGP, OROPS, excellent condition, 1154 hours...........................$68,500. 2003 JD 650H LGP, OROPS, sweeps, very good, 2320 hours...........................$58,500.

Track Loaders

Gradall/Lull Sales, Service, Training

2004 NPKE-208, 2500 ft./lb. impact energy, fits 14-21 US ton carriers, good condition ......................................$8,700. McAllister Equipment Jim Tracey 708/297-3541

Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com NH Construction Equipment New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

Track Loaders 2005 John Deere CT322, Cab, A/C, aux hyds, hyd quick attach, block heater, 1542 hours...........................$32,500. Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com

MISCELLANEOUS

Stone, Wacker, Honda, Gehl, JLG to name a few ..... Norris Sales Company 610/279-5777 www.norrissales.com Daily - Weekly - Monthly Competitive Rates Mixers, Generators, Arrow Borads, Compaction, Excavators, Loaders! Now in PA & NJ Norris Sales Company 800/547-RENT (7368) 610/279-5777 Construction & Industrial Equipment Rentals Compaction, Excavating, High Lifts, Traffic Control, Safety, Loaders, Landscaping Norris Sales Company 610/279-5777 Construction Equipment Rentals

McAllister Equipment Jim Tracey 708/297-3541

We Service What We Sell! Warranty, Maintenance and More!

Modern Equipment Sales & Rental 800/445-4381

1992 Dresser 200, cab, GP bucket, great U/C, good condition, 6800 hours ....................................$34,500.

Heavy Equipment, Light Equipment, Hand Tools & Gas Detectors

TRAINING

913-3787-2371

2004 New Holland LS180, 2 speed, aux hyds, turbo, cab..............................$14,750.

HYDRAULIC HAMMERS Breakers

2004 John Deere 644J, cab, A/C, GP bucket, rear diff lock, ride control, 8125 hours.. ..................................$129,500.

Daily - Weekly - Monthly & Long Term Rentals Available

Service

Skid Steer Loaders Modern Equipment Sales & Rental 800/445-4381

Wheel Loaders

Call for more details! Murphy Tractor 316-945-1015 www.murphytractor.com 2002 John Deere 250 II, OROPS, counter weight, bucket, great condition, 800 hours..........................$18,500. 913-371-3822

Norris Sales Company 610/279-5777

Operator Training Are your operators compliant with Federal Standards, OSHA, ANSI, ISO?

MOTOR GRADERS Graders 1983 John Deere 670A, cab, front scarifier, good condition, 6550 hours..................$24,500. 913-3787-2371

MODERN GROUP offers training for: - Front-end Loaders & Backhoes - Aerial work platforms (AWP) (Boom & Scissor Lifts) - Rough Terrain Forklifts (Gradall, Lull, JCB) - Skid Steer Loaders

RENTALS Rental Construction & Equpment & Supplies for the "Professionals"

For information, pricing or reservations: Call 1-800-223-3827 www.moderngroup.com All prices include Trainer, travel and material NO HIDDEN COSTS

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 69

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. NEED BULLDOZER D10T 2009 AND UP RIPPER UNDER 9000 HOURS FROM USER ONLY CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CATERPILLAR MOTOR GRADERS | WE ARE LOOKING TO PURCHASE SEVERAL UNITS OF THE FOLLOWING CATERPILLAR & KOMATSU MOTOR GRADERS: CAT 12G (1978 - 1995) CAT 140G (1988 - 1995) CAT 14G (1978 1995) CAT 14H (1995 - 2000) KOMATSU GD661-4 (1998 UP) KOMATSU GD705-4 (1998 UP) ALL EQUIPMENT MUST BE IN GOOD WORKING CONDITION. IF YOU HAVE ANY, PLEASE OFFER IT TO ME WITH COMPLETE SET OF PICTURES, PRICE, SERIAL NUMBER AND CONDITION. CONTACT: AIMN BLBOL PHONE: +971504814823 EMAIL: SALE@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– CATERPILLAR PERFORMANCE HANDBOOKS | HANDBOOKS NO. 1,2,3,6,8 CONTACT: TOM HAUENSTEIN PHONE: 805 735 3649 FAX: 805 735 8785 EMAIL: COASTALEARTHMOVERS@ VERIZON.NET –––––––––––––––––––––––––––––––– PILE DRIVING | NEED USED 416 J&M OR ICE VIBRATORY HAMMER ASAP. THE OLDER THE BETTER CONTACT: ROBERT EMAIL: PILEMANMD@HOTMAIL.COM –––––––––––––––––––––––––––––––– MANITOU BUCKET WANTED***** | WANTED TO BUY 2 OR 3 YARD BUCKET FOR MANITOU TELEHANDLER OR OTHER ATTACHMENT FOR MANITOU CONTACT: TURBO MENZEL PHONE: (262) 613-2527 EMAIL: MENZELENGINEERING@GMAIL.COM –––––––––––––––––––––––––––––––– CAT 980 F, CAT 966 C ORIGINAL PAINTS CONTACT: HISHAM OSMAN PHONE: 7034156660 EMAIL: HISHAMOSMAN4U@HOTMAIL.COM –––––––––––––––––––––––––––––––– CATERPILLAR, HITACHI, DYNAPAC , KOMATSU | REGULAR REQUIREMENT OF MENTIONED MACHINES | (WE BUY FOR OUR STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 920, 930, 950B, E & 966D, E CAT 140G S/N:10,000 UP. DYNAPAC CA251D,CA262D,CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1, EX100WD-1, EX60WD-1, UH07-7, UH083 KOMATSU EXCAVATOR PC 200-6,-7. IF AVAILABLE ANY TIME CONTACT ME CONTACT: IKRAM KHAN PHONE: +92-333-55-55-360 EMAIL: INFO@IUKCO.COM ––––––––––––––––––––––––––––––––

SEALCOAT/ASPHALT/PAVING | LOOKING TO BUY ALL TYPES OF ASPHALT RELATED EQUIPMENT ROLLERS PAVERS, SEALCOAT , STRIPERS, ASPHALT PLANERS. NO DEALERS PLEASE CONTACT: JAMES MANN PHONE: 1-404-273-9424 FAX: 1-770-306-2962 EMAIL: JAMES2525@MSN.COM –––––––––––––––––––––––––––––––– BOBCAT BRAND EQUIPMENT ***WANTED*** | BUYING BOBCAT BRAND SKID STEER LOADERS AND EXCAVATORS LOCATED IN THE SOUTH EASTERN UNITED STATES. ESPECIALLY LOOKING FOR LARGE FRAME MACHINES, S250, S300, A300, T250, T300, T320. PREFER GOLD PACKAGE MACHINES, BUT WILL CONSIDER ANYTHING BOBCAT. PLEASE EMAIL WHAT YOU WANT TO SELL, A FEW PHOTOS AND YOUR ASKING PRICE. THANKS IN ADVANCE. CONTACT: WARREN EMAIL: TWOPETIES@AOL.COM –––––––––––––––––––––––––––––––– 1984 CASE 680H | BACKHOE DIPPER STICK,W/WO EXTENDAHOE CONTACT: RAY HALGAS PHONE: 518-848-9023 FAX: 518-843-3614 EMAIL: RAYHALGAS@YAHOO.COM –––––––––––––––––––––––––––––––– CAT DOZERS | WE ARE LOOKING TO PURCHASE CATERPILLAR D9N & D9R DOZERS WITH RIPPERS IN GOOD CONDITION AND WITH POWERSHIFT TRANSMISSION ONLY. PLEASE OFFER ME WHAT YOU HAVE WITH COMPLETE SET OF PICTURES, CONDITION, SERIAL NUMBER, LOCATION, AND FINAL PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL: USA@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– KOHLER 14 HP MAGNUM ENGINE | KOHLER 14HP MAGNUM ENGINE FOR A 1 TON BEUTHLING ROLLER CONTACT: RAY PHONE: 973 865 5342 FAX: 973 227 0763 EMAIL: CHIEFANDSON@VERIZON.NET –––––––––––––––––––––––––––––––– PILE HAMMERS | SEEKING ICE, MKT OR APE VIBRATORY PILE HAMMERS AND CAISSON BEAMS. WE ARRANGE FOR PICK-UP AND PAYMENT QUICKLY. YOUR BEST OPTION FOR SELLING YOUR PILE HAMMERS CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET –––––––––––––––––––––––––––––––– VOLVO L90F PARTS | I WANT THE PRICE LIST FOR THESE PARTS. 1.20798675. 2.20973777. 3.21060258. CONTACT: AARON BAFFOE PHONE: 233244857601 EMAIL: AAROBAFF@YAHOO.COM ––––––––––––––––––––––––––––––––

KOMATSU BR380JG1 | LATE MODEL LOW HOUR CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD@COMCAST.NET –––––––––––––––––––––––––––––––– DAEWOO 420 LCV | GOOD CONDITION AND LOW HOURS CONTACT: ABDELGAWAD ALI PHONE: +201009797657 FAX: +20226636455 EMAIL:ABDELGAWADALI@GMAIL.COM –––––––––––––––––––––––––––––––– PILE HAMMERS | LOOKING FOR ALL MAKES AND MODELS DIESEL HAMMERS AND VIBRATORY PILE DRIVERS. ATTACHMENTS ALSO WANTED. TOP DOLLAR PAID CONTACT: LISA S. PHONE: 201-444-6311 EMAIL: LISAS@ BTCTRANSPORTSYSTEMS.COM –––––––––––––––––––––––––––––––– NEEDED BULLDOZER KOMATSU 65PX15 2007 AND MORE UNDER 1500 HOURS ENC CAB USER CHEAP PRICE CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 EMAIL: JEANMAURICEBOUTIN @BULLDOZERJM.COM –––––––––––––––––––––––––––––––– CATERPILLAR, HITACHI, DYNAPAC , KOMATSU | REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR STOCK TIME TO TIME) MARKET MEET MACHINERY: CAT 920.930.950B, E & 966D,E CAT 140G S/N:10,000 UP. DYNAPAC CA251D, CA262D, CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1,EX100WD-1,EX60WD-1,UH077,UH083 KOMATSU EXCAVATOR PC 200-6,-7. CONTACT: MR MAHSOOD PHONE: +92-333-55-55-360 EMAIL: IUK.IUKCO@GMAIL.COM –––––––––––––––––––––––––––––––– BUYER NEEDED | HITACHI EXACAVTORS EX200 | WE REQUIRE HITACHI EXCAVATORS EX200-1 CATERPILLAR WHEEL LOADER 950 UH083 KOMATSU EXCAVATOR PC 200-6,-7 | AVAILABLE FOR SALE CONTACT: SOLOMON PEDRO PHONE: +447024053755 FAX: +447024053755 EMAIL: ATOPMACHINERYUK@GMAIL.COM –––––––––––––––––––––––––––––––– WHEEL LOADER | KOMATSU WA 320-5L OR WA 250-5L, TO 2000 HR, WITH Q.C., BUCKET, & FORKS, TKS, D. HUGHES CONTACT: DON HUGHES PHONE: +64274430633 FAX: +6435465640 EMAIL: DON@MATCO.CO.NZ ––––––––––––––––––––––––––––––––

CAT IT28G | LOOKING FOR A GOOD USED IT28G WITH BUCKET AND FORKS AND MUST HAVE AN ENCLOSED ROPS CAB WITH A/C CONTACT: DAVID MULLINS PHONE: 276 328-0077 FAX: 606 644-0477 EMAIL: DMULLINS@VERIZON.NET –––––––––––––––––––––––––––––––– W20B CASE | UPPER DOOR LEFT HAND SIDE FROM SITTING INSIDE WITH GLASS OR NOT CONTACT: RANDY PHONE: 814 887 2717 FAX: 8148872214 EMAIL: RANDY@MCDOWELLLUMBER.COM –––––––––––––––––––––––––––––––– LULL 844C FROM CONTRACTOR WHOLESALE PRICE CONTACT: KEVIN SANSALONE PHONE: 856-297-4758 FAX: 856-362-5602 EMAIL: KEVIN@SANSALONEEXCAVATING.COM –––––––––––––––––––––––––––––––– HITACHI EXCAVATORS EX200 | WE REQUIRED HITACHI EXCAVATORS EX200-1 OR MARK I PLEASE LET US KNOW & SEND US DETAILS WITH GOOD PRICE. CONTACT: HIDAYAT MASOOD PHONE: +92-345-8818803 EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– DYNAPAC ROLLERS CA251D,CA262PD | WE NEED USED DYNAPAC ROLLERS CA251D,CA262D & PD ALSO WORK,PLEASE OFFER US & SEND US DETAILS, PICTURES & YOUR BEST PRICE. CONTACT: NAQIBKHAN INTERNATIONAL & COMPANY EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM –––––––––––––––––––––––––––––––– WE ARE LOOKING FOR CATERPILLAR WHEEL LOADERS 950, YEAR UP TO 1978. PLEASE LET US KNOW & SEND SOME DETAILS. PHOTOS & BEST PRICE. CONTACT: NAQIB KHAN PHONE: +92-333-3298751 EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– JCB 540_170 | MANUFACTURE 2001 MAX 4000KG MAX LIFT 17M CONTACT: CHATOO PHONE: 4168876552 EMAIL: MUSLIMCHATOO@YAHOO.COM –––––––––––––––––––––––––––––––– CASE LOADER BACKHOES | LOOKING FOR 580 E SK L SL M SMS CONTACT: TRICO EQUIPMENT NJ, FRANK HORAN PHONE: 1-800-654-USED (8733) EXT. 1230 FAX: 856-697-4842 EMAIL: FHORAN@TRICOEQUIPMENT.COM ––––––––––––––––––––––––––––––––

I AM SEEKING A XL3300 OR A XL4300 GRADALL. PREFERABLY IN GOOD SHAPE AND DECENTLY PRICED AS WE ARE JUST STARTING OUT. CONTACT: SANDY PHONE: 902 452 4091 FAX: 902 444 5057 EMAIL: SANDY@ROADSIDEGRADALLSERVICES.COM –––––––––––––––––––––––––––––––– BALDERSON QUICK TATCH | BALDERSON QUICK TATCH FOR 966 CAT WHEEL LOADER CONTACT: JON PHONE: 920 379 6786 EMAIL: DAJON7025@YAHOO.COM –––––––––––––––––––––––––––––––– CAT D9H | WANTED SCRAP BULLDOZER (CAT D9H OR D9G) WITH BLADE & RIPPER. WHOLESALE ONLY. IM POOR & CHEAP. CONTACT: CLIFF PHONE: 7247364546 FAX: 7247364998 EMAIL: CBERTOCCI@AOL.COM –––––––––––––––––––––––––––––––– BAR JOIST | BAR JOISTS (OPEN WEB STEEL JOISTS).ELEVEN NEEDED (11),40LONG X 27"DEEP.I CAN MODIFY LONGER LENGTHS.LANGHORNE,PA. CONTACT: HERB SCHURR PHONE: 215-757-2524 FAX: 215-757-9591 EMAIL: HERB144@HOTMAIL.COM –––––––––––––––––––––––––––––––– CATERPILLAR, HITACHI, DYNAPAC , KOMATSU • REGULAR REQUIREMENT OF MENTIONED MACHINES. (WE BUY FOR OUR STOCK TIME TO TIME) CAT 920.930.950B, E & 966D,E CAT 140G S/N:10,000 UP. DYNAPAC CA251D, CA262D, CA301D [PAD FOOT TYPE ALSO WORKS] JCB TELEHANDLER 550 YEAR 1999~2005 HITACHI EXCAVATOR EX200-1,EX100WD-1, EX60WD-1,UH077,UH083 KOMATSU EXCAVATOR PC 200-6,-7. CONTACT: MR KHAN PHONE: +92-300-283-10-78 EMAIL: IUK.IUKCO@LIVE.COM –––––––––––––––––––––––––––––––– NEEDED TO BUY BULLDOZER D9T WITH RIPPER UNDER 7000 HOURS CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– TIRES 295 X 25 • TIRES...TIRES....TIRES 29.5 X 25 CONTACT: MIKE PIEPER PHONE: 319-372-2276 FAX: 319-372-2277 EMAIL: PI2279@YAHOO.COM –––––––––––––––––––––––––––––––– VIBRATORY PILE HAMMERS (ICE, MKT OR APE • I AM SEEKING TO PURCHASE USED VIBRATORY PILE HAMMERS MANUFACTURED BY ICE, MKT OR APE. INTERESTED ONLY IN VIBRATORY MODELS AT WHOLESALE PRICING. SAME DAY PURCHASE AND PAYMENT AVAILABLE. CONTACT: JEFF LAWSON PHONE: 864-542-4369 EMAIL: JLAWSON29321@CHARTER.NET ––––––––––––––––––––––––––––––––

378 CUMMINS • LOOKING FOR AN ENGINE FOR A HOUGH 60 B PAYLOADER CONTACT: AL PHONE: 402-358-0410 EMAIL: ALAMOFARM@GMAIL.COM –––––––––––––––––––––––––––––––– FLATBED TRAILERS • LOOKING FOR USED 48X102" SPRING RIDE FLATBED TRAILERS. CONTACT: JOE TERRY PHONE: 832-215-6586 FAX: 713-696-8519 EMAIL: JTERRY@ADOBEEQUIPMENT .COM –––––––––––––––––––––––––––––––– AUTOCAR TRUCK AP15 OFFHIGHWAY DUMPEND TRUCK • ANY CONDITION. CONTACT: ARTHUR MELLINGER PHONE: 717-575-3668 EMAIL: ARTMELLINGER@GMAIL.COM –––––––––––––––––––––––––––––––– SEEKING TO SCRAP OLD SAW MILLS, MINING & GRAVEL PLANTS, OR OLD EQUIPMENT | CALIFORNIA ONLY CONTACT: MIKE MURPHY PHONE: 805-929 4604 FAX: 805-929-6485 EMAIL: JSMURPHY2011@HOTMAIL.COM –––––––––––––––––––––––––––––––– LOOKING FOR EAGLE CRUSHING PLANT 1000CC OR 1200CC PORTABLE CRUSHING PLANT CONTACT: JOE PHONE: 724-944-5569 EMAIL: FJS-1@ATT.NET –––––––––––––––––––––––––––––––– KOMATSU D53A17 RIPPER • I NEED A USED RIPPER FOR A D53A-17 KOMATSU DOZER CONTACT: JOHN RATLIFF PHONE: 276-608-1507 FAX: 276-591-1239 EMAIL: CMESALES@BVUNET.NET –––––––––––––––––––––––––––––––– KENCO KL9000 BARRIER LIFT CONTACT: MICHAEL GIGLIO PHONE: 708-868-0074 FAX: 708-868-0102 EMAIL: MGIGLIO @CALUMETCITYPLUMBING.COM –––––––––––––––––––––––––––––––– NEEDED BULLDOZER KOMASTU D65E 6 D85 WITH MOTOR KOMASTU ONLY USER? CONTACT: JEAN MAURICE BOUTIN PHONE: 1-450-346-8975 EMAIL: JEANMAURICEBOUTIN@ BULLDOZERJM.COM –––––––––––––––––––––––––––––––– WOULD LIKE TO FIND A CAB FOR A BOBCAT 334 EXCAVATOR, ONE THAT WOULD BE A HARD CAB NOT A VINYL ONE CONTACT: GARY DONARSKI PHONE: 218-874-3171 FAX: 218-874-3172 EMAIL: BDCONSTCO@WIKTEL.COM ––––––––––––––––––––––––––––––––

Page 70 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 71

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Tuscaloosa, AL Sat., March 3, 2012 For: Construction, Logging, Truck Tractors, Support • Dallas, TX Wed., March 7, 2012 For: Construction Equipment, Trucks, Trailers, Attachments, Support • Boston, MA Fri., March 9, 2012 For: Construction Equipment, Trucks, & Pickups • Manchester, NH Sat., March 10, 2012 For: Telescopic Forklifts, Boom/Scissor Lifts, Air Compressors, Skid Steers • Racine, WI Sat., March 24, 2012 For: Construction Equipment, Trucks, Dump Trailers • Atlantic City, NJ Thurs., March 29 – Sun., April 1, 2012 For: Annual 4 Day Construction, Support, Attachment, Truck & Trailer Auction • Manassas, VA Fri., April 13, 2012 For: Construction Equipment, Attachments, Support, Trucks and Trailer • Bogota, Columbia Sat./Sun., April 21-22, 2012 For: Late Model Construction & Support Equipment • Syracuse, NY Sun., April 29, 2012 For: Construction, Lawn and Garden Equipment, Support and Accessories

March 13, 2012 • Albuquerque, NM March 21, 2012 • Denver, CO March 14, 2012 • Chicago, IL March 15, 2012 • Minneapolis, MN March 21, 2012 • Salt Lake City, IT March 22, 2012 • Sacramento, CA March 27, 2012 • Chehalis, WA March 29, 2012 • St. Louis, MO March 30, 2012 • Dickinson, ND April 4, 2012

• Houston, TX February 8-9, 2012 • Orlando, FL February 13-18, 2012 • Tipton, CA February 17, 2012 • Williamsport, PA February 21, 2012 • Phoenix, AZ February 24, 2012 • Kansas City, MO March 1, 2012 • Los Angeles, CA March 2, 2012 • Fort Worth, TX March 8-9, 2012 • Springfield, IL

• Prospect, CT December 8, 2012 For: Construction Equipment

• San Bernardino, CA August 25, 2012 For: Construction Equipment

DEANCO AUCTIONS

• Sacramento, CA September 8, 2012 For: Construction Equipment

• Sacramento, CA October 13, 2012 For: Construction Equipment

• Saskatoon, SK April 18, 2012 INTER NA TIONAL • St. Aubin Sur Gaillon, France March 6, 2012 • Caorso, Italy March 8, 2012 • Panama City, Panama March 9, 2012 • Ocana, Spain March 15-16, 2012 • Brisbane, Australia March 20, 2012 • Geelong, Australia March 22, 2012

• Sacramento, CA February 11, 2012 For: Construction Equipment

www.rbauction.com 402-421-2631

• Sacramento, CA August 11, 2012 For: Construction Equipment

CANADA

• Middletown, NY Sat., May 12, 2012 For: Construction, Support, Trucks and Trailers

RITCHIE BROS. AUCTIONEERS

• Prospect, CT October 13, 2012 For: Construction Equipment

• Grants Pass, OR April 13, 2012

BAR NONE AUCTION

• Atlanta, GA DATE TBA For: Construction Equipment, Attachments, Support, Trucks and Trailers

• San Bernardino, CA July 28, 2012 For: Construction Equipment

• San Bernardino, CA September 22, 2012 For: Construction Equipment

• Buffalo, NY Sat., May 5, 2012 For: Construction Equipment, Support, Tools, Trucks and Trailers

• Houston, TX DATE TBA For: Construction Equipment, Support, Trucks and Trailers

Coming Auctions

www.barnoneauction.com 866-372-1700

• San Bernardino, CA February 25, 2012 For: Construction Equipment • Sacramento, CA March 10, 2012 For: Construction Equipment • San Bernardino, CA March 24, 2012 For: Construction Equipment • Sacramento, CA April 14, 2012 For: Construction Equipment • San Bernardino, CA April 28, 2012 For: Construction Equipment • Sacramento, CA May 12, 2012 For: Construction Equipment

• San Bernardino, CA October 27, 2012 For: Construction Equipment • Sacramento, CA November 10, 2012 For: Construction Equipment • San Bernardino, CA November 16, 2012 For: Construction Equipment • Sacramento, CA December 8, 2012 For: Construction Equipment • San Bernardino, CA December 15, 2012 For: Construction Equipment

www.catauctions.com 866-750-9432 • Albuquerque, NM February 28, 2012 For: Construction Equipment • ONLINE ONLY March 21, 2012 For: Construction Equipment • Houston, TX March 29, 2012 For: Construction Equipment • Baltimore, MD April 3, 2012 For: Construction Equipment • Denver, CO April 19, 2012 For: Construction Equipment

DAVIS AUCTIONS www.davisauctionsinc.com 203-758-4087

• ONLINE ONLY Mon., March 14, 2012 For: Construction Equipment • ONLINE ONLY Tues., March 15, 2012 For: Construction Equipment • ONLINE ONLY Tues., March 22, 2012 For: Construction Equipment

www.deancoauction.com 601-656-9768

• ONLINE ONLY Mon., March 28, 2012 For: Construction Equipment

• Philadelphia, MS Wed.-Fri., March 28-30, 2012 For: Huge 3-Day Contractor’s Auction

• ONLINE ONLY Tues., March 29, 2012 For: Construction Equipment

EQUIPMENT FACTS

J.M. WOOD AUCTION COMPANY

www.equipmentfacts.com 908-788-2025 • Kissimmee, FL Mon., February 20, 2012 For: Virtual Auction of Construction Equipment with Digital Pictures and Video in a Clean Indoor Facility. Radisson Resort Orlando-Celebration.

IRAY AUCTIONS www.iraymn.com 320-968-7230 • Foley, MN Fri., March 9, 2012 • Foley, MN Fri., June 8, 2012

CAT AUCTION SERVICES

• ONLINE ONLY Tues., March 8, 2012 For: Construction Equipment

• ONLINE ONLY Fri., July 27, 2012 • Foley, MN Fri., September 14, 2012 • Foley, MN Fri., November 30, 2012

IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid!

RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • Lebanon, TN Sat., March 17, 2012 For: Construction Equipment

STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • Online Only Wed.-Thurs, February 1-9, 2012 For: IQBID Consignment Event – selling Ag, Construction, Trucks, Vehicles and More! • West Fargo, ND Wed., March 4, 2012 For: Construction Equipment

www.jmwood.com 800-447-7085

• Online Only Thurs.-Thurs, March 1-8, 2012 For: IQBID Consignment Event – Advertise Now to Sell Your Excess Equipment

• Montgomery, AL Tues.-Wed., March 14-16, 2012 For: Construction Equipment

• West Fargo, ND Wed., March 14, 2012 For: Agiron 60 Consignment Event

MEEKINS AUCTION COMPANY

UTILITY AUCTIONS

www.meekinsauction.com 800-499-6560 • Greenville, NC Thur., February 23, 2012 For: Construction Equipment and Trucks

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.co m 860-642-4200 • North Franklin, CT Thur.-Sat., March 22-24, 2012 For: 3 Day Spring Auction with 1000’s of lots!

www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., February 24, 2012 For: Construction and Utility Equipment

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700 • Online Only Mon., Jan 30 – Wed., Feb 15, 2012 For: Construction Equipment, Attachments and Vehicles • Princeton, MN Sat., March 17, 2012 For: Heavy Construction Equipment

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

WESTERN CONSTRUCTION AUCTIONS INC.

• ONLINE ONLY Tues., February 8, 2012 For: Construction Equipment

• ONLINE ONLY Thurs., February 9, 2012 For: Construction Equipment

www.wca-online.com 760-731-7760

• ONLINE ONLY Wed., February 9, 2012 For: Construction Equipment

• ONLINE ONLY Thurs., February 16, 2012 For: Construction Equipment • ONLINE ONLY Tues., February 28, 2012 For: Construction Equipment

• San Bernardino, CA May 26, 2012 For: Construction Equipment

• Prospect, CT March 10, 2012 For: Construction Equipment

• Polk City, FL February 21-24, 2012 For: Construction Equipment

• Sacramento, CA June 9, 2012 For: Construction Equipment

• Prospect, CT April 28, 2012 For: Construction Equipment

• ONLINE ONLY Tues., February 22, 2012 For: Construction Equipment

• San Bernardino, CA June 23, 2012 For: Construction Equipment

• Prospect, CT June 23, 2012 For: Construction Equipment

• ONLINE ONLY Tues., March 1, 2012 For: Construction Equipment

• Sacramento, CA July 14, 2012 For: Construction Equipment

• Prospect, CT August 18, 2012 For: Construction Equipment

QUAKER CITY AUCTIONEERS INC. www.quakercityauction.com 215-426-5300 • Online Only Wed.-Fri., February 8-10, 2012 For: Construction Equipment

• Perris, CA Thurs., February 16, 2012 For: Construction Equipment • Perris, CA Thurs., April 12, 2012 For: Construction Equipment

YODER & FREY AUCTIONEERS, INC. www.yoderandfrey.com 419-865-3990 • Kissimmee, FL February 6-13, 2012 For: 38th Kissimmee Florida Auction

Page 72 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ABSOLUTE AUCTION

FEATURING EQUIPMENT FROM

GREENVILLE PAVING COMPANY Sale Site Address: 2197 Old River Road Greenville, NC 27834

THURSDAY, Feb. 23rd, 2012 - 10:00 AM For more information on this auction or if you are interested in selling your surplus equipment and trucks for this auction, please contact one of our auction sales managers today!

CALL TO DAY FO R A FRE E BROCH URE

Trey Meekins: 910.258.4383 - trey@meekinsauction.com • E.B. Webb: 252.245.1405 - ebwebb@meekinsauction.com

For up-to-date auction inventory, with pictures and descriptions, visit our company website: meekinsauction.com

(2 OF 4) 1999-1998 MACK RD690S

2006 MIDLAND SPD-10 ROAD WIDENER

1998 CAT 135H VHP

2007 POWER CURBERS 5700C equipped w/ six molds, only 587 hrs

Auction conducted by:

1998 VOLVO L150C

2006 SAKAI SW800

2000 FREIGHTLINER CLASSIC

(2) 2005 KENWORTH T800 QUINTS

2007 INGERSOLL-RAND DD-38HF

1997 DYNAPAC CA251D

Lloyd Meekins & Sons Auction Company 4070 NC Hwy 211 East, Lumberton, NC 28358 NC Firm License #858 Office Phone: (800) 499-6560 (910) 739-0547 Email: info@meekinsauction.com • www.meekinsauction.com TUESDAY, FEBRUARY 21, 2012 – KIRBY-SMITH MACHINERY, INC. PAVING SEMINAR. KIRBY-SMITH MACHINERY, INC. 2012 Annual Paving Seminar 8:00 AM to 3:30 PM (Lunch Provided). (Please note: 7:30 AM Registration.) Seminar will include topics on Milling, Compaction 101, Paving 101, Stabilizers, Advanced Compaction and Advanced Paving. LOCATION is at the Arlington Convention Center, 1200 Ballpark Way, Arlington, TX 76011. Cost is FREE!!! Reservations Required by February 10th. Call Danelle Cochran at 214-371-7777 or 800-7531247. GUCA Safety and Education Class Schedule – For more information on the Georgia Utility Contractors Association, Inc., 2012 1st Quarter Safety Training Schedule , you may visit their web site at www.guca.com or call the association at 404-362-9995; toll free 877-SAF-GUCA; Fax: 404-3629211. For the 1st Quarter session, classes start February 28, 2012 and end March 30, 2012. Due to certification requirements, registration and payment must be received in advance for class participation. AGC of America Annual Convention Registration is now open for the AGC of America Annual Convention, being held in Honolulu March 13 – 17. AGC of AMERICA is pleased to offer a wide variety of meetings, events and seminars for construction professionals that can help you improve every aspect of your business. EVENTS LISTING: 1/30/12 to 2/1/12 – Conference and Convention Risk Management “2012 Conference on Surety Bonding and Construction Risk Management”; Naples, FL.

BusinessCalendar

his hard work and dedication this past year!

Joliet, Illinois

***Are you looking for a special way to say “Thank You” to your staff for a job well done this year, or to a client who has remainded loyal to your services? GiftBridge Cards provide a true means to express your appreciation. More than a “cash” card that the recipient can use for gas or groceries, GiftBridge cards offer you the chance to give a gift that will be remembered by the recipient; an experience, from taking a loved one out to dinner and a movie, to taking a much needed vacation, to pampering themselves at a Spa or on the golf course. They are easily purchased thru AGC of St. Louis’ web portal, http://agcstl.giftbridge.com. You can purchase as many cards with a range of denominations and experience types, then have them delivered to your office. Show thanks to staff or clients and your support of AGC of St. Louis by purchasing these unique experience cards from GiftBridge and give someone something they will remember you by, this holiday season.

Illinois Valley (IDOT District 3) Monday, March 5 Chapin’s Restaurant 701 N. Liberty Street Morris, Illinois Northwest Region (IDOT District 2) Monday, March 12 Candlelight Restaurant 2200 1st Avenue Rock Falls, Illinois

Illinois Association of Aggregate Producers 1115 S. 2nd Street, Springfield, Illinois 62704 Phone: 217-241-1639 Fax: 217-241-1641 www.iaap-aggregates.org

AGC St. Louis Construction Leadership Council 2012 Mardi Gras Float – “Three Little Pigs” Enjoy the excitement of the Soulard Mardi Gras Parade as you ride on the Construction Leadership Council float on Saturday, February 18th. Cost: $80 per float rider. Price includes beer, beads and a great ride on the CLC float in the famous Soulard Mardi Gras Parade!!! Limited availability on the float. First come, first served. Come out and join us for a great time!!!

2012 – IAAP Grassroots Meetings Please consider attending one or more grassroots meetings in 2012 hosted by the IAAP Legislative Committee. You will also have the opportunity to meet State Senators and Representatives in attendance, as well as local county engineers, and hear about their concerns. Don’t miss these important opportunities! All meetings begin at 4 PM and end at 6 PM. All meetings begin at 4 PM and end at 6 PM on the date and location indicated below:

SAVE THE DATE! The AGC of St. Louis ANNUAL RECEPTION is Thursday, April 12th, 2012 at the St. Louis Union Station Marriott. Details will be available soon!

Central Region (IDOT Region 3) Monday, February 6 The Chateau Hotel 1601 Jumer Drive Bloomington, Illinois

AGC of St. Louis 2011 Chairman of the Year Congratulations to Chris Walker of Guaranatee Electrical Company on being named the 2011 Chairman of the Year! Chris served as the 2011 Construction Leadership Council Chairman. The AGC of St. Louis would like to thank Chris for

Northeast Region (IDOT District 1) Tuesday, February 14 Al’s Steak House 1990 West Jefferson Street

Northeast Region (IDOT District 1) Monday, March 19 Westwood Tavern and Tap 1385 N. Meacham Road Schaumburg, Illinois During each meeting the Illinois Department of Transportation’s regional engineer or senior staff member will provide unique insight regarding local road and bridge building projects as well as challenges facing illinois’ road program. You will also have the opportunity to meet State Senators and Representatives as well as county engineers and others working in the transportation construction industry and learn more about their concerns. For more information, please contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers, 1115 S. 2nd Street, Springfield, IL. Telephone: 217-241-1639; Fax: 217-241-1641; Email: shawn@hansoninfosys.com. 2012 – IAAP Convention – SAVE THE DATE! The IAAP’s 44th Annual Convention is scheduled for Tuesday, May 15, 2012, at the Crowne Plaza Hotel in Springfield, Illinois. IAAP Member Spring Thaw Safety Conference, March 6-7, 2012 Upcoming Spring Thaw/State Grants Safety Conference: March 6-7, 2012 at The Chateau Hotel in Bloomington, Illinois Presented by the Mine Safety and Health Administration (MSHA) and Illinois Department of Natural Resources-Office of Mines and Minerals (IDNR-OMM) at a new location in

Bloomington, this annual conference promises to be very informative with topics of critical interest to aggregate miners, supervisors and safety professionals in Illinois and surrounding states. For more information, please contact Shawn McKinney, Outreach Manager, Illinois Association of Aggregate Producers, 1115 S. 2nd Street, Springfield, IL. Telephone: 217-241-1639; Fax: 217-241-1641; Email: shawn@hansoninfosys.com. AGGI 2012 Aggregate Forum & Expo AGGI 2012 Aggregate Forum & Expo will be held in Charlotte, NC, March 12 – 15, at the Charlotte Convention Center in conjunction with the NSSGA Annual Convention. AGGI will colocate again with World of Asphalt for the third year. The synergy produced by these two events has been immense, with all who participated in prior events in total agreement about the benefits enjoyed from a natural industry fit between the two shows. Upcoming MSHA Contests MSHA’s North Central District will be staging a mine rescue contest for underground metal and nonmetal mines, and a separate first aid contest for surface and open pit mines, quarries, plants and mills. The mine rescue contest will be held on April 3-5, 2012 at the International Union of Operating Engineers Local 150 Apprenticeship and Skills Improvement Training Facility near Wilmington, IL. This is an indoor, climate controlled facility, and it is one of the finest venues in the country for a regional mine rescue contest. The first aid contest for surface operations will be held in Duluth, MN on May 17, 2012 at a venue to be determined. Our 2011 contest drew nine 2-person teams from six mining operations. We hope to grow the contest in 2012 to include more teams from more mines throughout the Midwest region.

2012 FLORIDA Contractor Associations Meetings Postings: Florida Prestress Concrete Association Winter Meeting, February 8 and 9, 2012, Lake Mary, FL. 2012 FTBA Construction Conference to be held March 20 and 21, 2012 - Double Tree Hotel in Orlando, FL. Location: Doubletree by Hilton at the Entrance to Universal Orlando 5780 Major Boulevard, Orlando, FL 32819. For more information please call 407-351-1000. 2012 Annual Asphalt Contractors Association of Florida Convention, June 21 to 23, 2012 at Orlando World Center Marriott, Orlando, FL. 2012 Annual Asphalt Contractors Association of Florida Convention, July 19 to 21, 2012 at UUCF Convention, The Ritz-Carlton Orlando, Grande Lakes, Orlando, FL.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 73

ALBUQUERQUE NEW MEXICO

2008 CAT 345DL

2008 CAT D6T XL VP

FOLLOW THE NEW

LEADER

FEBRUARY 28, 2012

2008 CAT 14M VHP PLUS

9 A.M. LOCAL TIME 6101 Chappel Road NE // Albuquerque, NM 87113 2011 CAT 966H

UNRESERVED PUBLIC AUCTION

*Equipment subject to change

Our auctions offer a wide variety of equipment makes and models, as well as premium services from the Cat name you already know and trust. Search the full equipment listing and register to bid online at:

View the full equipment list, photos, and inspections at: www.catauctions.com

www.catauctions.com/albuquerque

©2012 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Follow the new leader.® www.catauctions.com

CAT AUCTION SERVICES 860 Blue Gentian Road, Suite 100 Eagan, MN 55121 855.228.2286 info@catauctions.com

Page 74 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Altorfer Illinois Truck Sales Manager Jim Painter (R) points out the truck features to Benton County Iowa Shop Foreman Dan Higdon.

Jackson County Iowa Highway Department Lead Man Dale Miller (L) and Shop Foreman Shawn Heer are enjoying the open house event.

Altorfer Power Systems Showcases Cat CT660 at Open House

ltorfer Power Systems of Cedar Rapids, Iowa, held an open house Dec. 14 showcasing the first Cat CT660 Vocational Truck sold in the state. The Cat CT660 Vocational Truck, officially launched at the CONEXPO-CON/AGG 2011 tradeshow in March, first arrived at Altorfer Power Systems in late October. The truck then went to a body builder for dump box installation, and was delivered to the first customer in Iowa on Dec. 9. Ed Smith, truck sales Representative for Altorfer Power Systems, said the new owner, Jay Proffitt of Jay Proffitt Construction, approached him early this year about acquiring the first CT660 in Iowa.

“When the truck was first announced, Jay came to us and said he wanted the first Cat truck in Iowa. In fact, he delayed getting a new truck until he could buy Cat,” said Smith. “He has been very loyal to Caterpillar and the quality, durability and customer care that comes along with it.” Smith added that Proffitt has been pleased with the new truck, and the custom design for his application. Jay Proffitt Construction primarily uses the truck for hauling gravel for their business, and for quarries in the area. Approximately 60 people attended the open house with many attendees expressing interest in the truck. Additional events displaying the CT660 Vocational Truck

Driver Paul Blinks had the privilege of picking up and getting this new Cat CT660 into service for new owners Proffitt of Solon, Iowa.

will be held in 2012, including the Missouri Dump Truckers Association Trade Show in Colombia, Missouri and the Midwest Truck and Trailer Show in Peoria, Illinois. For more than 50 years, Altorfer Inc. has served the construction, agriculture, landscaping and trades, manufacturing, material handling, rental, mining, governmental, trucking and power generation industries. Altorfer Inc.’s power division, Altorfer Power Systems, provides power generation sales, rental and support, and truck and industrial engines sales and support throughout Southeast Iowa, Central Illinois and Northeast Missouri. For more information, visit www.altorfer.com.

Chuck Egan of Solid Waste Agency, Cedar Rapids, Iowa, is looking to add another articulated Cat truck to his company’s fleet.

CONSTRUCTION EQUIPMENT GUIDE â&#x20AC;˘ www.constructionequipmentguide.com â&#x20AC;˘ February 4, 2012 â&#x20AC;˘ Page 75

Factory Hires, Construction Boost Economy at Yearâ&#x20AC;&#x2122;s End By Christopher S. Rugaber AP ECONOMICS WRITER

WASHINGTON (AP) U.S. manufacturers ended 2011 with their best month of growth since the late spring. And the struggling construction industry spent more on projects for the third time in four months. The data bolstered hopes that the economy is gaining momentum and helped Wall Street start 2012 with a bang. Factories hired more workers in December, saw the most growth in new orders since April and ramped up production. U.S. builders spent more in November on single-family homes, apartments and remodeling projects. The strong reports correspond with other positive signs for the economy. Consumer confidence is up, unemployment benefit applications have tumbled and the unemployment rate is at a three-and-a-half-year low. Economists caution that Europeâ&#x20AC;&#x2122;s debt crisis will likely slow global growth in the first half of the year. But on Jan. 3, the outlook was mostly positive. The Institute for Supply Management, a trade group of purchasing managers, said its manufacturing index rose to 53.9 from 52.7 in November. Readings above 50 indicate expansion.

The Commerce Department said spending on construction projects rose 1.2 percent in November. The increase was the largest since a 2.2 percent rise in August. â&#x20AC;&#x153;The trend for the U.S. economy is most decidedly to the upside,â&#x20AC;? said Dan Greenhaus, an analyst at brokerage firm BTIG LLC in New York. The Dow Jones industrial average rose 179.82 points, almost 1.5 percent, to close at 12,397.38. Broader indexes also climbed. Reports that manufacturing grew in China and India, two of the worldâ&#x20AC;&#x2122;s largest economies, also drove markets higher. U.S manufacturing has expanded for more than two years. Factories were one of the first areas of the economy to start growing after the recession officially ended in June 2009. They faltered over the summer after Japanâ&#x20AC;&#x2122;s March 11 earthquake disrupted auto and electronics supply chains. The December ISM survey showed many factories have largely recovered from their slump earlier this year Exports rose despite the trouble in Europe. Growth in new orders means output will likely increase in the coming months. And U.S. factories hired last month at the fastest pace since June, an optimistic sign ahead of the Jan. 6 important measure of job growth in December. â&#x20AC;&#x153;All in all, an upbeat report,â&#x20AC;? said Peter

Newland, an economist of Barclays Capital, who noted that the stronger manufacturing activity should contribute to faster economic growth in the October-December quarter. Construction spending rose 1.2 percent in November to a seasonally adjusted annual rate of $807.1 billion. While thatâ&#x20AC;&#x2122;s barely half the $1.5 trillion that economists consider healthy, home construction has begun a gradual rebound and likely added to the nationâ&#x20AC;&#x2122;s economic growth in 2011. Spending jumped 9.5 percent on home improvement projects in November. It rose 1.5 percent on single-family home construction and gained 1.3 percent on apartment building. â&#x20AC;&#x153;While spending on single-family construction still remains extremely depressed, it has now increased for six straight months and looks consistent with other indicators signaling some improvement in the housing market,â&#x20AC;? said Daniel Silver, an economist with JPMorgan Chase. The U.S. economy still faces plenty of challenges. Europe is likely already in recession because of its ongoing debt crisis. A separate survey of European manufacturers released earlier in January found that factory activity shrank last month for the 17 nations that use the euro. â&#x20AC;&#x153;It is hard to see the U.S. economy strengthening this year when the euro-zone

Construction Materials Prices Drop Again; Remain Up From December 2010 The amount contractors pay for a range of key construction materials edged down 0.2 percent in December but climbed 5.3 percent from a year earlier, according to an analysis of producer price index figures released Jan. 18 by the Associated General Contractors of America. Meanwhile, the amount contractors charge to construct projects remained largely flat for the month and is up only between 3.3 and 4.7 percent for the year, cutting into contractor earnings and adding to the challenges the hard-hit industry is facing, association officials said. â&#x20AC;&#x153;Any relief contractors might get from the recent declines in materials prices is being offset by their inability to increase prices for new construction projects,â&#x20AC;? said Ken Simonson, the associationâ&#x20AC;&#x2122;s chief economist. â&#x20AC;&#x153;With overall demand relatively weak and public sector investments in construction declining rapidly, construction remains a buyerâ&#x20AC;&#x2122;s market.â&#x20AC;? Simonson noted that prices for many key construction materials declined between November and

December. The price index for diesel fuel dropped 7.8 percent in November, yet remains up 20.2 percent compared to December 2010. The index for copper and brass mill shapes continue to decline from record high levels early this year, sinking 0.4 percent in December and down 9.3 percent for the year. Likewise, steel mill products dropped in price for the month, by 0.6 percent, but rose 11.3 percent from a year earlier. Meanwhile, the index for asphalt paving mixtures and blocks increased 0.4 percent in December and 8.4 percent for the year. Despite inching up slightly in recent months, the price indexes for finished nonresidential buildings, which measure what contractors estimate they would charge to put up new structures, have lagged compared to the yearover-year increases in materials costs, Simonson observed. The index for new industrial buildings actually declined 0.1 percent in December and is up only 3.3 percent for the year. The index for new office construction inched up 0.2 percent for the month and 3.9 percent for the year. The price

for new warehouse construction was unchanged in December and rose 3.8 percent compared to December 2010. And the price for new school construction was up 0.1 percent for the month and 4.7 percent for the year. Association officials said the fact contractors continue to be squeezed between materials costs and what they can charge is making difficult market conditions worse. They said Congress and federal officials could provide needed help by enacting a series of measures to boost private sector demand and counter recent declines in public sector construction activity. â&#x20AC;&#x153;The fundamentals are the same for construction as for any other industry, uncertainty breeds caution and stifles demand,â&#x20AC;? said Stephen E. Sandherr, the associationâ&#x20AC;&#x2122;s chief executive officer. â&#x20AC;&#x153;The best way to boost demand for construction is for Washington to set permanent tax rates and enact long-term infrastructure and investment measures, including for aging highway, transit, aviation and water systems.â&#x20AC;?

is on the cusp of a potentially severe recession and when growth in Asia is set to slow,â&#x20AC;? said Paul Dales, an economist at Capital Economics. Consumers could also pull back on spending. That would hurt growth because consumer spending accounts for 70 percent of economic activity. But for now, Americans are feeling a little better about the economy. The Conference Board said that its consumer confidence index rose in December to the highest level since April. And the number of people applying for unemployment benefits each week is dropping steadily, evidence that companies are cutting fewer jobs. Weekly applications have dropped by 10 percent in the past three months. Employers are hiring more workers, too. The economy generated an average of 143,000 net jobs a month from September through November. Thatâ&#x20AC;&#x2122;s almost double the pace for the previous three months. The economy likely grew at an annual rate of 3 percent or more in the final three months of this year, analysts say. That would top the 1.8 percent growth rate in the July-September quarter, and the 0.9 percent growth rate in the first half of the year. Analysts forecast a modest expansion of 2.4 percent in 2012, an Associated Press survey of economists found.

Accepting Excavators, Dozers, Loaders, Semis, Trucks, Trailers and Related Equipment!

6 + *

Jct MN Hwy 95 & 25 Foley, MN

Accepting Consignments Until Noon on Saturday, March 3rd, 2012 For a complete list of our upcoming auctions visit www.iraymn.com

3 H*))I H%$,I +(*E)$%, or Email iray@iraymn.com

Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-11-002 Real Estate Auctioneer & GPPA Certified Equipment Appraiser

Page 76 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cat Auction Services Holds Sale at Sigmon No. 23 Mine

at Auction Services held an unreserved public auction at the at the Sigmon No. 23 mine in Appalachia, Va., on Dec. 20. It was one of the largest mining auctions in the past decade. The sale featured a wide range of open pit mining equipment, in an auction inventory more than 150 lots. Highlights of the sale included an extensive selection of large Caterpillar earthmoving machinery, a Hitachi EX 1900 and a Superior high wall miner.

(L-R): Larry Goff Cat Auction Services; Sabrina Nelms and Tony Nenni, both of Carter Machinery, were at the sale to assist the buyers with their needs.

Bruce Knapp (L), McClung-Logan, Baltimore, and Tom Jamieson, Cleveland Brothers, Harrisburg, Pa., were interested in the trucks.

(L-R): Looking over a few of the wheel loaders, like this Cat 992, are Scott Linder; Dennis Ryan, Ring Power; John Alexander, Alban CAT; John Stancil and Vince Aguayo, both of Ring Power.

(L-R): Keith Ison, Brandon Resources; J.L. Scott and Billy Davis, both of The Tractor Company, were looking to buy a few pieces.

Rick Albin, president, Cat Auction Services, addresses the crowd prior to the beginning of the sale.

The sale included more than 50 Cat trucks. Looking to buy (L-R) are George Panson, A&P Trucking, Morgantown, W.Va.; Randy Brickley and Steve Holstein, both of Mining Machinery, Ashland, Ky; and Ed Newell, Pompey Coal, Pikeville, Ky.

Paul Shively (L), Paul R. Shively Inc., Floyd, Va., came to bid on trucks and to see the mining equipment, like the Cat D11T dozer behind him. Stewart Shank, his Carter Machinery sales representative, was on hand to give him some additional insight.

Maurice Matson (L), Matson Machinery, and Kenny Judge, Walker CAT, both in Charleston, W.Va., were looking over the dozers.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 77

Now Accepting Consignments for the March 17, 2012 Heavy Equipment Auction featuring: Dozers, Loaders, Excavators, Backhoes, Logging, Trucks, Trailers, Automobiles & Construction Related Items. To advertise items in our brochure information needs to be submitted by February 15, 2012. There is no fee for advertising! The more time we have to promote your equipment, the bigger the return at auction time!

Contact us now to reserve your spot in the brochure! Mitchell • 320-267-1799 Don • 763-360-5272 Steve • 320-250-4540 Jeremy • 763-647-9674 Office: 763-389-2700 • Email: info@waynepikeauction.com

Advertising Deadline Feb 15, 2012 All equipment must be in the yard by Saturday, March 10, 2012. Online Bidding Available Through www.waynepikeauction.com Fax: 763-389-1767 or Email: info@waynepikeauction.com

9492 Baptist Ch Rd • Princeton, MN 55371 • 763-389-2700 www.waynepikeauction.com

Altorfer Rental Location Now Open in Springfield, Ill. Construction is complete on Altorfer lighting and other equipment. In addition, Inc.’s newest rental facility, which co-locates Altorfer Rents provides customers with within Altorfer’s existing construction loca- every day construction tools and supplies. tion at 4200 Rodger St. in Springfield, Ill. The Springfield rental business operates Steve Mowbray, vice president of under the coordination of Doug Parisotto, Altorfer’s rental division, said this addition and construction sales and service is manprovides greater product availability and aged by Tom Williams. Craig Robeen and services to customers in the Springfield area. Doug Tarrant serve as the Altorfer sales rep“We are very excited to add rental servic- resentatives in the Springfield area. es to the Springfield construction location. For more information, call 217/585-9898 We believe this provides us with a greater or visit www.altorfer.com. opportunity to serve our customers, and offers a wider range of equipment for customers to purchase and rent,” said Mowbray. Altorfer Rents serves the landscape, construction, industrial and governmental sectors by offering a full line of Caterpillar machines, and a wide variety of complementary products from leading manufacturers. These Altorfer Inc.’s newest rental facility co-locates within products include aerial lifts, Altorfer’s existing construction location at 4200 compactors, generators, Rodger St. in Springfield, Ill.

POWERS AUCTION & EQUIPMENT SALES

20th Annual Spring Contractors/Landscapers Auction Saturday, April 7th, 2012 @ 8:00 am SALE SITE: FORMER FARM & FLEET STORE WOODSTOCK, ILLINOIS 60098

This Auction is always our biggest and best attended of the year. Consignments are always Welcome!

Mike Powers Powers Auction & Equipment Sales LLC. IL. Lic: 44400318 DON’T MISS THIS ONE! THERE IS SOMETHING FOR EVERYONE! For more information about this Auction email us @ mpowersequip@msn.com

or If you would like to be put on our mailing list Please call or email us your name and address.

815-338-9700

Page 78 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX ALEX PARIS CONTRACTING CO INC .....................................................9 ALLU GROUP ..........................................................................................20 AMERICAN STATE EQUIPMENT............................................................11 ARING EQUIPMENT CO INC..................................................................19 ATLAS COPCO CONST TOOLS INC......................................................45 BARGAINS..........................................................................................66,67 BODINE MFG ..........................................................................................31 CAT AUCTION SERVICES ALBUQUERQUE NEW MEXICO......................................................73 CEC..........................................................................................................46 CEG SCALE MODELS ............................................................................14 CLASSIFIEDS..........................................................................................68 CONSTRUCTION EQUIPMENT GUIDE WANTED...........................................................................................69 TARGETED EMAIL ...........................................................................27 IN PRINT OR WEB ...........................................................................65 EXCAVATOR & ATTACHMENTS PROMO .......................................70 DOOSAN INFRACORE AMERICA CORP...............................................32 DOOSAN PORTABLE POWER ...............................................................36 DOPPSTADT ...........................................................................................45 DYNAPAC ................................................................................................38 ERB EQUIPMENT ...................................................................................15 EXODUS MACHINES ..............................................................................47 FABCO EQUIPMENT INC .........................................................................7 FABICK CAT .......................................................................................13,51 FARM-RITE EQUIPMENT INC ................................................................40 FELLING TRAILERS................................................................................61 FINKBINER EQUIPMENT CO .................................................................11 FLANGE LOCK ..........................................................................................8 FLUID CONTROL SERVICES .................................................................20 FURY MOTORS.......................................................................................62 GARY CARLSON EQUIPMENT ..............................................................10 GRINDERCRUSHERSCREEN.COM ......................................................48 GROVE WORLDWIDE ............................................................................56 HOWELL TRACTOR & EQUIPMENT CO ..........................................26,80 HYDRAULICIRCUIT TECHNOLOGY ......................................................31 ILLINOIS TRUCK & EQUIPMENT .............................................................3 INDEXATOR INC .....................................................................................24 IRAY AUCTION ONLINE AUCTION............................................................................75 IROCK CRUSHERS.................................................................................48 IRON PLANET POLK CITY FL ..................................................................................79

JJ SCHECKEL CORP.........................................................................22,26 JOHN DEERE ..........................................................................................55 KAWASAKI CONSTRUCTION MACHINERY ..........................................57 KOMATSU AMERICA CORP ...................................................................38 KUBOTA...................................................................................................54 LEADING EDGE ATTACHMENTS INC ...................................................31 LLOYD MEEKINS & SONS AUCTION GREENVILLE NC .............................................................................72 M ADAMS EQUIPMENT CO....................................................................17 MCCANN INDUSTRIES INC .....................................................................6 MCCLOSKEY INTERNATIONAL .............................................................52 METSO ....................................................................................................49 MID COUNTRY MACHINERY .................................................................41 MIDWEST VIBRO INC.............................................................................24 MUSTANG MFG ......................................................................................34 NORAM....................................................................................................37 PATTEN TRACTOR & EQUIPMENT CO...................................................2 POWERS AUCTION & EQUIPMENT SALE WOODSTOCK IL ..............................................................................77 POWERSCREEN MW DEALER..............................................................53 RDO EQUIPMENT/SCHARBER EQUIPMENT .......................................21 RITCHASON AUCTIONEERS LEBANON TN ...................................................................................77 ROAD BUILDERS MACHINERY ..........................................................6,25 ROGERS BROTHERS CORP .................................................................22 ROLAND MACHINERY INC ......................................................................5 RUDD EQUIPMENT ................................................................................16 SENNEBOGEN........................................................................................50 SMITHCO.................................................................................................62 SOLIDA-WERK ..........................................................................................8 STAR EQUIPMENT LTD............................................................................6 TEREX CRANES .....................................................................................35 TITAN EMD ..............................................................................................23 TOPCON POSITIONING SYSTEMS .......................................................24 TOWMASTER INC ............................................................................26,63 TRAMAC BY MONTABERT.....................................................................31 VANDER HAAGS.....................................................................................22 WAYNE PIKE AUCTION PRINCETON MN ..............................................................................77 WHAYNE SUPPLY CO ............................................................................26

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 4, 2012 • Page 79

Register to bid today at IronPlanet is a registered service mark of IronPlanet, Inc. in the United States and other countries. All other trademarks are the property of their respective owners. Auction Business License #AB3127. Go to www.ironplanet.com for details on buyer transaction fees.

Page 80 • February 4, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE