Smart house plans and spec chdd

Page 1



40’ Smart House specification

Ⅰ. General

Smart House not just a house, it’s a new technology for living manufactured to meet individual requirement for a small family.

Smart House delivered to your location as a kit container, includes all the components. It only takes about 8 hours and 4-5 people for the erection, all the instructions will provided by Silverwood.

Ⅱ. Dimensions and Weight (ISO Standard 1161) External Package Size (40’) Length: 12192mm Width: 2435mm Height: 2896mm


External Open Size Length: 12192mm Width: 6943mm Height: 2896mm Internal Open Size Length: 11800mm Width: 6700mm Height: 2400~3000mm Mechanical Properties Gross Weight: 18T Floor Allowable Load: 3.5KN/m2 Roof Allowable Load: 2.0N/m2

Ⅲ. Design Specification 1. Steel Framework Material Main frame used hot-rolled steel profile Cold formed steel profiles in a thickness of 1.5mm~3.2mm Galvanized light gauge steel in a thickness of 1.0mm~1.6mm


Surface Treatment and Paint Material & Standards: Sand blast to clean rusts and create a protection velamen on the face; Sprays 10um antirust lacquer; Finally, sprays 60um protect velamen. Note: color can be changed accord to the customer’s requirements. Fittings: 8 reinforced corner fittings (dimensions according to ISO standard 1161) Others: The structure is composed with main part and folding part, when packed folding the panel to form a standard container, when unpacked folding out the panel and then install the posts and the wall to fix the up panel and bottom chasis. 2. Bottom chasis Composed (outer to inner) Bottom panel: 0.5mm thick galvanized steel sheet. Insulation: 100mm polystyrene insulation panel insert to the gap of the beam. Vapor barrier: 80um thick polythene velamen. Base panel: 18mm thick fiber-cement board Floor: 15mm thick grooved and tongued carbon color bamboo floor panel. Allowable load: 3.5KN/ m2 Heat transfer coefficient: K=0.45W/ m2.K 3. Top Covered Composed (outer to inner) Roof surface: 0.5mm thick white color corrugated steel roof sheet Insulation layer :8mm bubble insulation Base board: 18mm plywood board. Insulation: 80mm Rockwool insert to the gap of beam. Ceiling: 12mm plywood board+12mm gypsum board with emulsion paint Allowable load: 2.0 KN/ m2 Heat transfer coefficient: K=0.45 W/ m2.K 4. Wall System


a. Interior Wall Composed (surface to surface) Outer panel: 12mm gypsum board with emulsion paint Insulation: 100mm rock wool insulation insert in the frame Outer panel: 12mm gypsum board with emulsion paint Allowable load: 1.5 KN/ m2 Heat transfer coefficient: K=0.45 W/ m2.K

b. Exterior Wall: Frame: aluminum alloy frame Sandwich panel(external to internal) 1. 0.5mm white color-bond steel sheet 2. 9mm fiber-cement board 3. 50mm XPS insulation board 4. 9mm fiber-cement board with emulsion board Windows/door: AS standard aluminum double glass window and door.

5. Bathroom


a. Door Wooden frame door

b. Floor Composed (outer to inner) Outer panel: 0.5mm thick galvanized steel sheet. Insulation: 100mm polystyrene insulation panel insert to the gap of the beam. Vapor barrier: 80um thick polythene velamen. Base panel: 18mm fiber-cement board Floor surface:10mm thk 600x600 ceramics

c.Wall use 10mm 300x450mm wall ceramic

d. Sanitary 1. toilet: standing type ceramic toilet with water-mark certificate 2. wash basin: ceramic basin with wooden cabinet, the tap need water-mark certificate. 3. shower cabin: 10mm toughen clear glass partition wall, 5 star shower head.

e. Plumbing All the plumbing pipe are water-mark certificated materials


foundation, folding out the container, put the extend part on the proper concrete block foundation. 3. Install the posts between the bottom floor and top covered; last install the curtain wall one by one.

⅊. Warranty Complete – container, equipment and installations:

12 Months

Paint Warranty: 12 Months

Remark: Rights to technical changes are withheld

Outside view

living-room


Ⅴ. Electrical Equipments Standard: Execute AS standard code Voltage: 220/380V, 50HZ Distribution box: “Hager” brand box put IEC standard MCB/RCD. Wiring: all the wiring have the AS standard, and also the connect method meet Australia code. The switch use 2*1.5mm cable, white and red, the powerpoint use 3*2.5mm cable, red color is the active line, black color is the neutral line, yellow green color is the earth line. Switch and power point: AS standard type

Ⅶ.Tool Allen key, spanner key, electrical screw gun, silica gel gun

Ⅷ. Mounting 1. Start on the separated foundation, Smart housing totally needs 16concrete block foundation, with size 30×30× 30cm, distribute it along the length beam, divided each beam into coordinate 2 parts, and divided the width beam into coordinate 2 parts. 2. When installing first finish the foundation, then put the packed container on the proper


Bedroom

kitchen

Veranda

bathroom








Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.