Essential Farm Machinery February 2024

Essential Farm

February 2024

covering East Anglia and the Midlands

UNRIVALLED SPREADING PRECISION AXIS mounted fertiliser spreaders, available in working widths from 12m to 50m and capacities from 1,000L to 4,200L. Contact your KUHN Dealer or visit our website to see the full range: www.kuhn.co.uk Scan the QR Code to visit the ‘Fertiliser Spreader Range’ website page

R EXCEEDED OU EXPECTATIONS

Richard Hellyer Farm Manager

on a 700ha heavy clay farm at Hatley St George, Bedfordshire

s and reduce in 2021 to replace heavy cultivation l dril 6m on Trit the sed cha pur We acreage and d us to maximise our winter wheat pectations ed we allo ow all has s on ha Trit n The ito ts.

Tr cos l e fue Th and ourr an labou eded d fuel costs. ceeed expectations ourr ex s ex ed ou lab illl ha exc has n dr dril ito on Trit e Tr The Th n. atio tio rot the ta ro e th ps m cro an led fro s dril er th ing gh sprring drilled crop p sp dro we n we tha her hig a which th is hi ich is g 11 op in dr ha 11t ag er ing av rag ave ts s ea eat wh h th wit wi and ts d an cos s at st ion th co uct y in red sa n tic to ma io dra a dr ha witth em.. It e to say that amatic reduct true sttem is tru It is gh sy ou wi sys pl d ugh plo an n and tio tion va tiva lti cul cu vy hea e vio pre ourr pr idenc ious heavy nffide from ev ting e co gettti re ge were m ou nce d giv con ng fro the ns an es th gives itio and we cond ons y diti an con y any all ly tu ual virt vir in ely ctively effectiv on clay effe the drilll cla will dril n will Trito the Trit s. ss. gras gra ck bla k uce red blac to r ce late du eat re wh l to dril er to lat t ea to drill wh Twin and system and removal system blade removal pin blade roll pin hold roll Twin hold backward leaning air borne upper blade blade upper backward leaning air borne for flow trash flow of trash ease of and ease lift and trash lift for trash Seed seed the seed holding the deep holding 40mm deep tail 40mm depth tail Seed depth at correct depth and placing seed on either either on seed at correct depth and placing side terrace seedterrace ofseed sideof

Next Patented GenerationPatented NextGeneration Drilling Blades Drilling Blades

Triton engagement soilengagement deepsoil uniquedeep itsunique launchedits Tritonlaunched direct drill in 2018 to give plough based yields direct drill in 2018 to give plough basedyields from are weare laterwe yearslater Sixyears drilling.Six directdrilling. fromdirect consistently the fromthe yieldsfrom higheryields achievinghigher consistentlyachieving Triton than from ploughed trials on our own Triton than from ploughed trials on ourown land. seed weatherseed onlyallallweather theonly Tritonisisthe TheTriton land.The drill on the market that gives the flexibility drill on the market that gives theflexibility totogrow crops sowncrops autumnsown profitautumn maximumprofit growmaximum whilst reducing blackgrass from late drilling. whilst reducing blackgrass from latedrilling.

AAnumber now arenow manufacturersare othermanufacturers r ofother numbeof claiming all weather capabilities – don't claiming all weather capabilities – don't bebecaught Triton. againsat aTriton. demoagainst geta ademo out,get caughtout, daily videos @tritonuk @tritonuk videos daily

SOIL SOIL SURFACE SURFACE

Downward Downward upper facing facing upper does blade blade does grass hook not not hook grass up seedup weedseed weed below from from below bed seedbed staleseed stale field and and field surface surface

at Drillingat Drilling depth 40mm 40mm depth Downward Downward upper facingupper facing holds blade blade holds surface fieldsurface field place in in place soil minimisingsoil minimising the eruptionininthe eruption bed seedbed staleseed stale

14cm deep deep 14cmdeep lower blade 14cm takes blade blade lower lower blade deep blade takesbelow takes blade for tilesfor tungstentiles Triangular Triangulartungsten ground for below deep deep below t and draughand reduceddraught air drainage reduced for groundfor ground and rooting disturbance soildisturbance soil drainag air air drainage e rooting androoting and Triton UK: 01223 891888 (East Anglia & Midlands) Triton North & Scotland: 07712 831718 (Steve) (S.T. Gowan Agri) ds) Midlan Anglia& &Midlands) 891888 (EastAnglia 01223891888 UK:01223 Triton Triton UK: Southern agent: 07970(East 549012 (Richard Peck) Agri) GowanAgri) ) (S.T.Gowan (Steve(S.T. 831718(Steve) 07712831718 Scotland:07712 Triton North& &Scotland: TritonNorth Abington Farm Park, Great Abington, CambridgeshireireCB21 6AX CB216AX Cambridgesh CB21 Abington,Cambridgeshire GreatAbington, Park,Great FarmPark, Abington 6AX AbingtonFarm

www.tritonseeddrills.com www.tritonseeddrills.com

NEWS

‘Record breaking’ visitor numbers at LAMMA 2024

M

ore than 40,000 visitors attended last month’s LAMMA machinery show, say organisers – a record for the two-day event which attacted 95 new exhibitors.

Described as a milestone in the event’s 42-year history, LAMMA saw a number of machines make their UK debut at the Birmingham NEC. They included the Massey Ferguson’s

Essential Farm Machinery Editor: Johann Tasker | T: 07967 634971 E: johann@ruralcity.co.uk Advertising sales: Danny Lewis | T: 01502 725862 E: danny.lewis@micropress.co.uk Advertisement production: Jade Soanes | T: 01502 725840 E: jade.soanes@micropress.co.uk

Essential Farm Machinery is published monthly for farmers and growers in the eastern counties and the Midlands. It is mailed with Anglia Farmer and Midland Farmer magazines and is also available at selected farm machinery and supplies outlets. © Countrywide Publications 2024 Published by Countrywide Publications, Fountain Way, Reydon, Suffolk IP18 6DH T: 01502 725800 Printed by Micropress Ltd, Suffolk T: 01502 725800

9Stractor, with six models ranging from 285-425hp.

Marketing manager Lindsay Haddon said. “LAMMA is the perfect place for the UK debut of the 9S because of its footfall.

It’s the biggest agricultural show in the UK and really accessible.”

Confidence JCB was another big name which returned to the show. New products included the Fastrac ICON operating system and the 51440 telehandler. Product manager Dave Timmis said the company’s stand had been very busy.

“It’s been great to exhibit our electric range and hydrogen engine, as we are aware there are a lot of future farm decision makers here. We’ve got our full agri-

SHORT OF STORAGE SPACE? 02476 459000

New machines Other products new to the UK market included Uni-Mog’s Uni-Touch operating system, two trailers from Suffolk-based Richard Western, Spread-aBale’s side throw option, an 11.2m tedder from Krone and nine new models to Kubota’s RT compact loader range.

Grange Farm Machinery introduced its Strip Till Preparator, while Dan-Agri showed its Tytan rollermill and SIP revealed its Disc HD range and Star rotary rake. Kverneland showcased its Vicon RO-M W Pro twin disc fertiliser spreader.

Competitive prices for all your agricultural & industrial requirements

67639

CONTACT US NOW!

BOWIE LOCKWOOD sales@bowielockwood.co.uk

cultural range here to give confidence to potential customers we are here for the long run.””

RIDBA

Rural & Industrial Design & Building Association

Essential Farm Machinery February 2024 3

NEWS

Compact telehandler marks expansion to new sector

K

ubota has launched its first telehandler – as the company seeks to provide a wider range of machinery solutions for agriculture.

The compact KTH4815-2 machine boasts width of 1.6m and height of below 2m – lending itself to farmers with traditional livestock or poultry buildings and other areas where space is limited.

Model numbering indicates the telehandler’s lifting capability, with the KTH48152 achieving a maximum lift height of 4.8m and a maximum lift capacity of 1.5 tonnes, depending on the variant.

Also part of the standard specification are hose-burst check-valves and a load-moment sensor with forward over-turn protection to meet EN15000 certification.

Eurohitch Hydraulic performance extends to as much as 81 litres/min, with 51 litres available through an auxiliary circuit for powered attachments on a hydraulically locking Eurohitch headstock. A proportional joystick includes adjustable flow rate and memory function.

An EU Stage V emissions compliantthreecylinder engine powers the KTH4815-2 with a peak output of 50hp. Mounted on the righthand side between the front and rear wheels, the transverse engine position is designed with easier servicing in mind.

The hydrostatic driveline is equipped with Carraro axles connected by mechanical driveshafts. It has a Bosch Rexroth hydraulic motor delivering propulsion in two speed ranges– 0-7kph and 0-25kph.

The powertrain affords multidisc brakes and, with permanent four-wheel drive, there is an option of a selectable front axle differential lock, to further boost traction.

Four versions of the KTH4815-2 telehandler are available. Two are canopy-equipped models with a curved front screen, and two use fully glazed cabs with a two-piece door – and a glazed upper section which can be secured in the open position.

The entry-level KTH4815-2 is supplied without a 170kg rear counterweight and is on 10/75x15.3 narrow tyres, reducing both its cost and performance. A wider 31/15.515 skid steer tyre option is available.

Why not upgrade your machine?

Proven Landscape Technology

The hedgecutting season is now drawing to close, so:

The new Hawk Evo 7.0 Power Plus now offers increased power and additional features for enhanced hedge cutting.

Order now for delivery before next season.

Forestry

Remote

Tel +44 (0) 1789 773383 E-mail info@bomford-turner.com Website www.bomford-turner.com

4 Essential Farm Machinery February 2024

Cultivation

Follow us

Landscape

The Kubota KTH4815-2 was showcased at last month’s LAMMA show in Birmingham

Contact your local dealer for the best offers

AVISON SPRAYERS LARGEST USED SPRAYER OUTLET IN THE UK

2015 KNIGHT 1840 4000LT 12-24-36M + GPS 4100 HRS

2018 HOUSEHAM AR 4000 15-30M + GPS 4190 HRS

2014 BATEMAN RB35 4000LT 12-20-24M + GPS 9380 HRS (ENGINE OVERHAUL)

2016 HOUSEHAM AR3000 12-24-30M + GPS 4250 HOURS

2013 SAM VISION 4000 12-24-30M + GPS 4850 HRS

2011 HOUSEHAM AR3500 12-24M + GPS 7500 HRS NEW ENGINE @ 6000HRS

2011 SAM VISION 4000E 12-24-30-32M + GPS 8500 HRS

2008 BATEMAN RB26 3000LT 12-24-30M + GPS 5900 HRS

2010 KNIGHT SP1835 3500LT 12-24M + GPS 5800 HRS

2010 CHAFER 418-S 3500LT 12-24M + GPS 6185 HRS

2022 CHAFER GUARDIAN 2 E 4000LT 12-24-30M + GPS ISO

2019 CHAFER SENTRY 2 5000LT 12-24-36M + GPS ISO

2014 KNIGHT TRAILBLAZER 4200LT 12-24-36M + GPS ISO

2014 CHAFER SENTRY 4000LT 12-24M + GPS

2018 CHAFER SENTRY 2 6000LT 12-24M + GPS ISO

(WANTED: SELF-PROPELLED & TRAILED SPRAYERS) Roughton Moor, Woodhall Spa, Lincolnshire, LN10 6YQ TEL: 01526 354433 FAX: 01526 354242 EMAIL: sales@avisonsprayers.com WEB: www.avisonsprayers.com ALL SPRAYERS NSTS TESTED BEFORE DELIVERY

THIS IS JUST A SELECTION OF OUR STOCK – MORE ON OUR WEBSITE

TRACK

&

www.envirotyre.com Collection & environmental recycling of agri, truck, industrial, car tyres & tracks. Suppliers of heavy-duty sidewalls for silage clamps.

Collection throughout the UK. PLEASE CALL 0345 331 2747 Essential Farm Machinery February 2024 5

NEWS

30th anniversary for Norfolk sugar beet specialists

M

achinery specialist J Riley Beet Harvesters is celebrating its 30th anniversary – marking three decades since the Norfolk-based company starting importing Vervaet sugar beet lifters to the UK from the Netherlands.

Company founder Jeremy Riley – and colleagues Peter Smith and David Oakley – were heavily involved with the establishment of the six-row selfpropelled harvester as the machine of choice for the region’s sugar beet growers and contractors.

With its four-wheel chassis, centrally-positioned tank and rearmounted engine, the Vervaet 17-tonne tanker model was the go-to machine for more than 20 years – and set the standard for most successful harvest-

ers of the time.

It was followed by the Vervaet Beet Eater – the world’s first nine-row harvester. Although a number of nine-row machines were successfully used by British contractors, the machine eally excelled in the UK when it was fitted with a six-row lifting unit.

With its eight turbines, six wheels and 600hp engine, the Beet Eater 625 developed a formidable reputation for high output even in the worst conditions.

Refurbishing used harvesters and overhauling machines out of season have been important activities for the company. New premises were built at Attlebridge in 2007, included workshop and office facilities which al-

lowed the stores to be enlarged.

The launch of the all-new Q-Series beet harvester in 2017 further cemented Vervaet’s market dominance.

The company’s market share expanded again following the introduction of a rollerbed option in 2021.

In 2022 Jeremy retired and sold the business, which is now co-owned by Vervaet and managing director Matt Carse.

“Having good people within the company has been key to its success

PLUG & PLAY SEPARATOR SYSTEM

THE BAUER SEPARATOR CONVERTS SLURRY INTO A VALUABLE FERTILIZER. SUITABLE FOR THE FOLLOWING APPLICATIONS: • Agricultural applications: Separation of cow, pig and chicken manure • Food industry: Separation of vegetable waste • Slaughter houses: Separation of paunch content

Adrian Tindall 07708 919597 a.tindall@bauer-at.com

6 Essential Farm Machinery February 2024

• Pharmaceutical industry: Separation of poppy seed mush • Biogas plants: Before and after fermentation • Distilleries

Rob Jackson 07939 410417 r.jackson@bauer-at.com

www.bauer-at.com

Vervaet 12-tonne and 17-tonnesixrow tanker sugar beet harvesters on the company’s stand at the Royal Norfolk Show during the early years.

over the past 30 years,” he says. “With a great team in place we are poised to continue the Riley story for the next three decades.

“We very much appreciate the continued support from our loyal customers.We enjoy many long-lasting relationships, and we are keen to continue to offer the highest level of service in the industry.”

Slurry applicators Success has also been achieved with

Vervaet self-propelled slurry and manure applicators. The J Riley range of slurry handling and application machinery was recently expanded to provide further solutions to slurry customers.

A team of 10 talented and experienced engineers currently provides service support to customers. The right machines for the UK market and exceptional backup are a winning combination, says Vervaet commercial director Jonathan Hoekman.

J Riley Beet Harvesters (UK) Ltd, the well-known Norfolk-based UK importer of Vervaet machinery, is celebrating its 30th anniversary in 2024.

“The UK is a special market where our philosophy comes together perfectly,” he explains.

“We believe three elements are key to customer retention – excellent machines, perfect service and backup – and low cost of ownership.

“This success is now being duplicated in the slurry machinery sector too. With younger teams in place at both Vervaet and Rileys we have a secure future ahead of us to continue this ultra-successful story.”

Mobile irrigation management system

• Monitoring of Rainstar operation • Optimize your irrigation management • Automatic Error messages

• Irrigation control via mobile devices • Team management • Automatic reports

Contact Adrian Tindall: T 07708 919597 E a.tindall@bauer-at.com Röhrenund Pumpenwerk BAUER Ges.m.b.H. 8570 Voitsberg, Austria, Phone +43 3142 200-0, sales@bauer-at.com, www.bauer-at.com

Essential Farm Machinery February 2024 7

NEWS

Forage equipment key to farm enterprise success

A

Worcestershire farmer and contractor have upgraded their forage equipment to deliver an even better service.

Father and son team Steve and William Page manage a 200ha beef and sheep enterprise, at Bosworth Farm, near Malvern. They have also built up a successful full-service grassland contracting business, serving customers in a 25-mile radius of the farm.

The pair produce home-grown forage for their 80-head Simmental herd and 300 North of England Suffolk-cross ewes, while providing contracting services across neighbouring counties, explains Steve.

“To help get the job done, we employ an extra member of staff, plus two more during busy periods, and have significantly invested in expanding

Above: The ‘game changing’ EasyCut 320 triple disc mowers in action Father and son team: Steve and William Page

our range of forage equipment as the business has grown,” he says.

Forage strategy Since purchasing their first Krone BiG Pack 890 square baler in 2010, the Pages have upgraded twice – including to the 1290 XC model they have now – to produce 15,000 hay and straw bales annually.

“We’ve chosen to stick with Krone balers with each upgrade to bigger machines because they’ve proven to reliably help meet the growing demands of the business. We find they produce good bale weights, even at high speed, which is crucial to us.”

In addition to the baler, the Pages have also invested in a Swadro TC 880 twin-rotor rake, Vendro 900 8-rotor tedder and an EasyCut 320 tripledisc mower. The Swadro rake is now four years old, and is likely to be upgraded this year.

“It’s fast becoming the most used and important piece of kit within the business. We upgraded our Vendro tedder from a six-rotor to the 900 eightrotor model last year and invested in an EasyCut mower for the first time this year. We hadn’t run triple mowers before, it’s been a game changer.

“With quick operation, it knocks down a lot of acres in a day.The conditioner aids crop quality and the varying speed adjustments are helpful, particularly when working with lucerne, where it’s important we’re not too heavy on it.”

Dealer support All machinery requirements are met by local dealer Pallisers of Hereford.

“We’ve not had any major breakdowns, but when we’ve needed spare parts, we’ve never been stuck. Any or-

8 Essential Farm Machinery February 2024

der is delivered the next morning and their back up is very good.”

After finishing a busy season, the forage equipment is blown down, oiled, greased and stored for the winter, with the intention of arranging dealer servicing in the New Year.

In addition to booking a winter service, Pallisers of Hereford’s Neil Lloyd recommends farmers also complete machinery checks. “I’d advise ensuring machines are kept clean and well-greased, along with refilling or changing oils as required.”

Large balers should be dealer maintained and regularly serviced, but there are some practical checks farmers can complete before bringing equipment out the shed next season, says Mr Lloyd.

“Baler specific checks include making sure the bearings don’t look too worn and, if there’s any doubt, replacing them.It’s also important to ensure the knotter area is clean – this can really impact how the baler works.”

Any unusual noises, particularly from the bale plunger, should be checked professionally. Tedder tines occasionally need replacing and it is important to ensure tyre pressures are correct.

“This is particularly the case for tedders and rakes used at high speed on hard ground. “It’s better to spend a few hundred pounds now to fix machines where necessary and avoid having a full breakdown in the field. It all adds to extending machine lifespans in the long run.”

Bosworth Farm’s machinery • John Deere and Deutz tractors • Amazone combination seed drill • Krone BiG Pack 1290 XC square baler, with BaleCollect • Krone Vendro 900 8-rotor tedder • Krone EasyCut 320 front and rear-mounted triple disc mowers • Krone Swadro TC 880 twin-rotor rake (to be upgraded)

WE ARE HIRING! Technical Sales Representative / Business Developer Key responsibilities: To help grow the business through product sales to manufacturers, dealers & hydraulic engineers.

• Seek out new business opportunities for the company • Develop new and maintain existing customer relationships • Provide customers technical advice regarding the Hydrokit range of product • Attend our stand at trade events

Nicest selection of MF Combines within the UK

NH TD80-4 C/W LOADER 5,980HRS

MF 6120, V TIDY, DYNA SHIFT, 4,700HRS

MF 7278 AL (06) 24’ PF, V TIDY

MF 7274 COMBINE, APPROX 2,000HRS

CATERPILLAR TH336C TELEHANDLER

NUGENT TIPPING TRAILER

YANMAR 8 TON DIGGER C/W DITCH CLEANING BUCKET

CASE CX50 DIGGER

Location IP13 area 01728 684800 Please apply in writing to: info@hydrokit.com

HARVEST HARVEST INSTALLATIONS INSTALLATIONS DRYING SPECIALISTS

CROP

HaRvESt COnStant HUmIdIty COntROllER

Gives you guaranteed drying conditions, 24/7. Efficient and economic with thousands of units in use on all combinable crops and onion stores nationwide.

Tractors & Telehandlers • MF 240 - p/steering • MF 6480 - Dyna 4, v tidy • MF 3060 - 4 autotronic, v tidy • MF 6120 - v tidy, Dyna shift, 4,700hrs • New Holland TD80 & loader, 5,900hrs • Caterpillar 407 ag telehandler (2009) - tidy • Various forks & grapples

Other Equipment • Dowdeswell DP7F, 7f, v tidy • KV LD85 5f & 4f • Flat Lift Force - 2 leg HD buster • Knight Raven, 3 leg combination, vgo • Vicon PO-EDW weightcell, vgo • Vicon RO-EDW extension hopper • Kuhn Axis 30.1 spreader extension hopper • Cousins 6.2m hyd rolls • Richard Western 12t dump trailer • Armstrong & Holmes 14.5t trailer, v tidy • Bomford 9ʼ topper • Major 1,600g vacuum tanker • 80” mounted rotovator • 450 & 600 workshop heaters • A full range of Nugent trailers

Harvesting • MF 7278 AL combine (2006) 24ʼ PF, v tidy • MF 7274 combine (2004) - 22ʼ table, 208hrs • MF 30 - 14ʼ FF - v tidy • MF 40 RS - 20ʼ PF - v tidy • Vicon RV2160 Round Baler, v tidy Excavators • Yanmar 8t & 3 buckets • Krone 1290 HDP Baler, tidy • Case CX5, 5t & 3 buckets • New Holland 980 Big Bale • Claas Liner 3100 twin rotor rake 10m • Kv Taarup 4232 3.2 trailed mower • New Holland 377 Baler

CALL: 01795 533903

Main Office: Unit 2/3 Oaklands Park, Rougham Hill, Bury St Edmunds, Suffolk, IP33 2RW. info@harvestinstallations.co.uk

www.harvestinstallations.co.uk Essential Farm Machinery February 2024 9

Lost access to prescription fertiliser?

We are here to help

With over 17,000 different grades, our local sites can meet all your prescription needs by matching fertiliser to soil and crop requirement.

l No excess nutrient =

saves money and protects the environment

l No deficiency =

improves yield and soil fertility

l No compromise =

exact match to your soil sample results and crop need

Talk to us about prescription nutrition

t: 03333 239 230 e: enquiries@originfertilisers.co.uk www.originfertilisers.co.uk

®

FERTILISER & SPREADERS

Prescription nutrition ‘essential’ for £3.3m farm fertiliser project

A

£3.3m trial is examining ways to reduce the dependence of UK grassland farming on mineral nitrogen fertilisers.

Called NUE-Leg, the Defra-funded project brings together scientific expertise and global leaders in plant breeding and soil microbiology, agronomy, carbon emissions and the farming and food supply chain.

The consortium includes experts from Origin Fertilisers and Origin Digital. They will create digital platforms to enable farmers to maximise the potential of the project findings.

If it works, the project will create the optimum conditions in a commercial farm setting to enable clover to fix up to 300kg of nitrogen per hectare per year – a large portion of which will be available for grass growth.

Balanced nutrition At these levels, additional mineral nitrogen fertilisers needed for grass growth can be significantly reduced –

placing greater emphasis on the importance of other minerals to create a balanced, nutritious crop.

A key part of the project is to identify the specific nutritional requirements of these new legumes and to develop prescription nutrition programmes, said Peter Scott, technical director at Origin Fertilisers.

“We also need to consider the other

Vicon showcases RotaFlow twin-disc spreader The Vicon RotaFlow twin-disc spreader was among the machines showcased by the Kverneland Group at last month’s LAMMA event.

Aimed at the mid-market sector, the Vicon RO-M W Pro has a maximum volume of 2800 litres. It boasts a heavy duty frame with four load cells and reference sensor developed for intensive spreader use of the spreader, says the company.

Vicon says its RotaFlow system ensures the smooth acceleration of fertiliser. The technology has already been proven on the RO-EDW spreader. A FlowPilot system enables quick and easy adjustment.

Smooth acceleration The RotaFlow has a central release point, smooth acceleration and centrifugal force which accelerates fertiliser up to disc speed before it reaches the vane. A double overlap spreading pattern helps to ensure accuracy.

Eight vanes per disc keep a

A range of nutrients will still be required, says Origin Fertilisers

nutrients required to optimise yield, nitrogen uptake and conversion into protein and the mineral profile required for a high value forage and more sustainable livestock production.”

Fertiliser programmes will be developed for both the crop establishment and maintenance phases. Origin Fertilisers will use its knowledge and expertise in prescription nutrition to match soil and crop requirements with nutritional inputs.

“Nutrients such as phosphate, potassium, sulphur, calcium and magnesium will be required in varying amounts to meet crop needs,” says Mr Scott. “Other nutrients such as sodium will play a role in increasing crop palatability and intake.

“As the sole fertiliser business in the project, our role is to identify the optimum nutrient profiles for these new legumes to provide the balance between optimised crop growth, livestock production and environmental enhancement.”

Est.1986

@agrihire Made in Britain used worldwide

AGRICULTURAL EQUIPMENT HIRE

ENGINEERING & SALES

continuous flow of fertiliser to the field. This is important for high capacity spreading and forward speed. Flat discs and a horizontal flow of fertiliser ensure a symmetrical spread pattern.

A consistent double-overlap spreading pattern is achieved with fertiliser always contacting the vanes at the same point as it moves through the machine – travelling the complete length of the vane.

With the Basic Section Control software on the RO-M W Pro weighing spreader, the number of sections are increased from two standard wide sections (left and right) into an even number of 4m sections.

Y body spinner deck Y body vertical beater Classic vertical beater 18 to 40 tonnes.

8 to 40 tonnes.

8 to 18 tonnes.

Single, Tandem & Tri-Axle options

Magnum spinner deck 20 to 50 tonnes.

Flat trailers 24 to 32 feet.

Bulk trailers 14 to 20 tonnes.

Agri-Hire, main dealers in Suffolk for...

call now to book your demonstration

Hire Sales James Seeley Ben Clowes 07860 849685 07764 968206 www.agrihire.co.uk

Parts Transmissions Jeremy Waspe Paul Offord 01473 744184 01473 240377 agrihire@agrihire.co.uk

Essential Farm Machinery February 2024 11

FERTILISER & SPREADERS

Young engineer wins top award at LAMMA

A

Harper Adams graduate who invented a hi-tech slurry pump scooped the Young Engineer Award at last month’s LAMMA event.

The Smart Slurry Pump has a real-time telemetry system that monitors key information from a remote-controlled tractor and umbilical slurry pump. It then relays this information to the remote operator at the applicator end of the umbilical pipeline.

Prototype pump Ieuan Evans said his invention came from spending countless hours operating a tractor driven umbilical slurry pump on his family’s dairy farm in Aberystwyth. He designed a prototype pump at Harper before developing it with Storth Machinery.

By providing more information to the remote operator of the Smart Slurry Pump, the system

reduces the labour needed, makes better use of the existing tractor fleet, increases the fuel economy of slurry spreading and helps prevent pipe bursts or leaks.

Mr Evans said: “It is a brilliant feeling to be recognised within the industry. A lot of hard work over many years went into creating the Smart Slurry Pump, but the journey has really helped me progress my career in a short space of time.

“The project started during my time at Harper Adams, where a lot of the novel work was done, and I continued to develop it at Storth Machinery, where the full vision was realised. There is still lots of work to do though.”

Mr Evans added: “We are aiming to increase the system’s monitoring capability to reassure users that the pump is working as intended, as well as helping them manage fuel efficiency and ob-

With Spica, Tauri and Polaris, LEMKEN offers the right fertiliser spreader for every farm. Clever technologies not only minimise losses, but also increase efficacy and spreading pattern. In other words, this is where maximum reliability and sophisticated technology come together.

OUR DRIVING FORCE: YOUR SUCCESS!

Ieuan Evans’ hi-tech slurry pump impressed the 2024 LAMMA Young Engineer Award judges

serve any anomalies.”

Charlie Nicklin, chief executive of the Institute of Agricultural Engineers, said: Necessity is the mother of invention,

and for budding agricultural engineers seeking to fix a problem they have encountered themselves can be a very rewarding challenge.”

Online shop now open

4245 B&H Ad.qxp_4245 B&H Ad 28/07/2022 16:08 Page 1 4245 B&H Ad.qxp_4245 B&H Ad 28/07/2022 16:08 Page 1

FERTILIZER SPREADERS

SPREAD SUCCESS!

4245 B&H Ad.qxp_4245 B&H Ad 28/07/2022 16:08 Page 1

• Order via our online shop for next day delivery.

• Comprehensive range of hydraulic adaptors, BSP, JIC, ORFS, DIN 2353 tube fittings and many more available in stock.

• Stockist of premium quality Quick Release Couplings and hydraulic Test Point fittings.

• Family owned UK manufacturers of premium quality hydraulic adaptors for over 55 years.

• In excess of 36,000 componentsmanufactured every day.

• ISO 9001 accredited.

FOR EVEN GREATER PRECISION: SpeedControl – the automatic spread rate regulation adapted to driving speed.* *

TM TM

standard for Polaris 14 SpeedControl and Polaris 16 SpeedControl

ISO ISO 9001 9001 www.burnettandhillman.co.uk www.burnettandhillman.co.uk TM

Find out more on lemken.com

ISO 9001 www.burnettandhillman.co.uk 12 Essential Farm Machinery February 2024

TM

TM TM

Main dealer for BARGAM Agriculture Machinery Main Dealer for BARGAM Agriculture Machinery

Merse Agriculture can supply new and used equipment, servicing and spare parts for all types of sprayers

MERSE Agriculture N E W U P D AT E D G R I M P E U R J R

We provide sprayers, servicing and spares Check out the website for more information and the rest of the range

www.bargam.co.uk

Quality • Performance • Precision

01361 408532 www.bargam.co.uk

Quality • Performance • Precision

01361 408532 www.bargam.co.uk Essential Farm Machinery February 2024 13

FERTILISER & SPREADERS

Bunning reintroduces trailer range at LAMMA

S

preader specialists GT Bunning & Sons showcased a redesigned four-model trailer range at last month’s LAMMA event – marking the company’s return to trailer manufacturing after 13 years.

The four-model range will be built at Bunning’s factory at Gressenhall in Norfolk. The firm says reintroducing the trailer line is to meet customer demand and will maximise a 7000m² factory expansion completed over the past two years.

Bunning sales director Chris Druce said: “We have been asked by existing Bunning customers for several years to start trailer production again and our recent factory expansion has allowed us to streamline the build process with cutting edge technology.

“We’ve improved some key areas of the trailer that will please old and new customers and we are delighted with the final product.”

The new range is based on the old design but has been improved

The new trailer range is the first in 13 years from Bunnings

and modernised in certain areas and features a completely new tailboard. Four models will initially be available in 14t, 16t, 18t and 20t formats.

Each will feature dual axles with larger bearings and multileaf suspension replacing the single parabolic system. The 4mm thick steel sides feature a single

14 Essential Farm Machinery February 2024

welded join along the length to increase strength, and smooth internal faces prevent crop damage, says Mr Druce.

The top rail and rear corner posts are deeper and wider, measuring 80x120mm to offer further strength. The 300x150mm chassis remains from the previous trailers and the 200x200mm

sprung drawbar has been proven on the spreader range.

The tailgate is a completely new design. Constructed from pressed steel, it is tapered from the sides to the grain chute to aid unloading. As the hydraulic tailgate closes, a locking pin on either side is hydraulically activated, says Mr Druce.

Contact us:

07790 989024 | 01159 655970

www.arcusin.co.uk stephen@arcusin.com

Hugh Pearl Lane Drainage has over 60 years experience of contracting, and can supply all of your drainage and trenching requirements from design to construction.

HUGH PEARL (LAND DRAINAGE) LTD NEW FARM, BOBBINGWORTH, ONGAR, ESSEX CM5 0DJ

T: 01277 890274

F: 01277 890322 E: admin@hughpearl.co.uk W: www.hughpearl.co.uk Essential Farm Machinery February 2024 15

NEW & USED STOCK www.chandlers.co.uk 2022

2015

NEW

NEW

KIDD 200 T HL POST DRIVER KIDD 330M BALE SHREDDER

KIDD 850T STRAW BLOWER

KIDD 200 T HL POST DRIVER

Mounted, Road Lights, Electric Controls

Trailed, 25m Spread Width, 120x90 Max Bale Size

Vertical Mast Lift 180° Swing Round

£17,650 +VAT

£9,250 +VAT

£7,850 +VAT

NEW

2007

Vertical Mast Lift, Rock Spike, Strike Plate.

180° Swing Round, Boom Telescopic

£9,350 +VAT 2009

2019

LESS THAN

LESS THAN

1500

1500 1000

Errors and omissions excepted. All prices +VAT

HOURS

£19,750 +VAT

HOURS

MANITOU MLT 634

MANITOU MLT 634

MANITOU 841

MANITOU MLT 840

6000 Hrs 6m Reach, 3400kg Lift Tyres: 460/70R24 (70%)

4800 Hrs 6m Reach, 3400kg Lift, Air Con

1500 Hrs, 141 HP 8m, 4000kg Lift Tyres: 460/70R24 (50%)

788 Hrs 8m Reach, 4100kg Lift

£22,000 +VAT

£41,750 +VAT

£69,750 +VAT

£90,000 +VAT

2015

2017

2020

KIDD 450T BALE SHREDDER Trailed Bale Shredder, Swivel Chute, C/W Road Lights, Remote Tail Gate Switch, Handles Straw, Haylage, Clamp Grass and Maize Silage.

2022

LESS THAN

1500 HOURS

MERLO TF38.7

MERLO 42.7 CS

MERLO TF38.7

4498 Hrs, 120 HP 7m Reach, 4200kg lift Tyres: 405/70R24 (5%)

6275 Hrs 7m Reach, 4200kg lift Tyres: 460/70R24 (50%)

1350 Hrs, 140 HP 7m Reach, 4200kg lift Tyres: 460/70R24 (95%)

£48,750 +VAT

£44,500 +VAT

£69,950 +VAT

SC AN ME TO SEARCH USED

MACHINES ONLIN E

BALE CHOPPERS

BALE SHREDDERS

POST DRIVERS

Full range of KIDD machinery available for immediate dispatch.

CALL CHANDLERS AG SALES TODAY Graham Peall: 07970 121109 or Andrew Elms: 07860 464753

SALES | PARTS | SERVICE www.chandlers.co.uk