1 minute read

TRITON... ADVANCED DIRECT DRILLING

Twin hold roll pin blade removal system and backward leaning air borne upper blade for trash lift and ease of trash flow

Seed depth tail 40mm deep holding the seed at correct depth and placing seed on either side of seed terrace

Next Generation Patented Drilling

Have you ever found grass weeds in the drill row and assumed it was in the seed?

All other tine drills have upward facing chisel tines which hook grass seed up from below the stale seed bed into the top 5cm germination zone. The Triton blade design is vital in making sure the drilling pass does not create its own grass weeds in the clean stale seed bed.

www.tritonseeddrills.com

@tritonuk

Triangular tungsten tiles for reduced draught and soil disturbance

SOIL SURFACE

Downward facing upper blade does not hook grass weed seed up from below stale seed bed and field surface

Drilling at 40mm depth

Downward facing upper blade holds field surface in place minimising soil eruption in the stale seed bed

SOIL SURFACE

SOIL SURFACE

Drilling at 40mm depth

Downward facing upper blade holds field surface in place minimising soil eruption in the stale seed bed

Downward facing upper blade does not hook grass weed seed up from below stale seed bed and field surface

14cm deep lower blade takes blade deep below ground for air drainage and rooting

Buying a blade drill is now an open and shut case. Why? Because only the Triton drill has a slot closer

Triangular tungsten tiles for reduced draught and soil disturbance

Triton UK: 01223 891888 covering East Anglia and the Midlands hold roll pin blade removal system and backward leaning air borne upper blade for trash lift and ease of trash flow depth tail 40mm deep holding the seed correct depth and placing seed on either seed terrace

14cm deep lower blade takes blade deep below ground for air drainage and rooting

Generation Patented Drilling ever found grass weeds in the drill assumed it was in the seed?

Abington Farm Park, Great Abington, Cambs CB21 6AX tine drills have upward facing chisel tines hook grass seed up from below the stale into the top 5cm germination zone. blade design is vital in making sure pass does not create its own grass the clean stale seed bed.

This article is from: