Crompton Controls Catalogue 2015 CC2122E Issue 16 by Crompton Controls

TM TM

Crompton Controls Catalogue

Standard Starters and Panel Components to Fully Customised Solutions.

CC 2122E Issue 16

2015

Standard Starters and Panel Components to Fully Customised Solutions Made in the UK

Energy

Saving

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Controls Catalogue 2014

CatalogueCatalogue Index Index DOL & Star Delta Starters

4-Pole AC Contactors

Reversing & Two Speed Starters Standard Starters

Capacitor Duty Contactors 4-6

Special Application Starters Hazardous Area Equipment Hazardous Area Equipment

Low Height DC Coil Contactors 7 Enclosed Contactors

98 DC Brakes Injection Brakes 8 S10PUWER DC Injection

8-10 Control & Signaling Devices

Control Stations & Timers 11

Point Of Sale Displays

Shaft Power Monitors Shaft Power Monitors

12 Spoola Cable Carriers

Speed Drives TSAVariable Soft Starters

13-15 Stockist Display Products

MSF Soft Starters Control Panels

Technical Information 16/17

Yaskawa J1000 Inverters

Contactors and Overloads Yaskawa V1000 Inverters

Electronic Components Yaskawa A1000 Inverters

HVAC Inverters & Systems Stockist Display Package

Yaskawa Enclosed Drives

Definition of IP Protection IP54 Standard Drives

Smooth Brake Controls/Enclosures/Isolators S35 Heavy Duty Brakes

Starter Codes 18/19 20 21 22

3-Pole ACto Contactors up to 105A 20 Guide Motor Currents

Thermal Overloads up to 93A Starter Codes

Larger 3-Pole AC Contactors

Extras for motor starters

Location Map/Carriage Charges

Monckton Road, Wakefield, West Yorkshire WF2 7AL UK www.cromptoncontrols.co.uk

Tel: +44 (0)1924 368251

E-mail: sales@cromptoncontrols.co.uk

Welcome to a heritage spanning over 130 years supplying outstanding control solutions

Crompton Controls can trace its roots right back to the late 19th Century and a pioneering electrical engineer, Rookes Evelyn Bell Crompton, who was responsible for one of the worldâ&#x20AC;&#x2122;s first public electricity supplies and introduced lighting networks to both Australia and India. Today this dynamic 100% privately owned British Company manufactures and supplies high quality electrical equipment including standard motor starters, solar PV products and fully customised complex control solutions to a wide range of industries and market sectors. Looking ahead our focus is very much on energy saving and optimising the investment our customers make in the life time of their systems. Almost two thirds of the electricity consumed by UK industry is used running motors and drives. According to3 the Carbon Trust the cost of running a motor for a year can be ten times what it cost to buy in the first place. The efficiency of an operation is therefore of critical importance so let Crompton support lowering Welcome to the latest edition of Crompton Controls Catalogue. your carbon footprint and reduce your energy bills.

This is Crompton Controls

Crompton Controls has been involved with power We have also entered into an exciting new partnership control installations since the electrical revolution with Yaskawa during 2010, and are delighted to offer Our factory isproud centrally located with fully equipped overmodern 130 years ago. We are of our heritage their outstanding range of AC Inverter Drives. The and position as one of the major suppliers of J1000, and a A1000 Drives offer leading edge, manufacturing, warehousing and office facilities to V1000, service Specialist Control Solutions. next generation products to rival anything on the large Distribution network and support a growing OEM customer market today, and incorporate many special features to base complete with dedicated visitor meeting & meet training areas. the widest of application requirements (see pages We have a system for every kind of motor control 13 to 16). application, and are able toto utilise our many years of Crompton continues innovate, naturally responding to experience to provide innovative packages that customer demand. Thistechnology. open approach together with expertise incorporate the very latest Energy saving in ismotor control andcana provide flexible in-house a particular focus and quick returns on technical capability investment. enables the company to be inventive and highly focussed on

customer service.

We are pleased to introduce our brand new Series

And what this catalogue 3000 range you of ACsee MotorinControllers, the next is only half of what we can offer! generation of our market leading Starters and

Our well known of Series Series 3000 Motor Starters, DC Injection Brakes, Variable Speed Inverter Drives, replacing the well ranges established 2000. Series Co3000 ntrolincorporates Panel Components Power Monitors are all readily available from individual components our new CC and RangeShaft Contactors, Overloads & Accessories to Thermal comprehensively populateddeveloped Point of from Salethe displays for serious stockists.

latest engineering techniques available in manufacturing today. This enhanced IP55 all steel The other half of Crompton Controls business provides a complete design & manufacturing service from constructed range conforms to all International modified standard starters to fully customised panels. We supply sectors & applications including All the above is supported by ourmost outstanding customer design, manufacturing and quality standards. The use control pumps, fans, compressors, andlifemachine tools with two specialist divisions, Systems for service and technical support. We pride ourselvesCrompton on of improved materials results in conveyors a longer product our ability to provide products on time and United to the expectancy, wider HVAC control & Crompton Solar for innovative solar PV solutions, all made in the Kingdom. most competitive lead times in the Industry. We strive range of outputs to provide a flexible service to meet the requirements and a better our customers, at Crompton Controls theare customer From Electricity Generating to EnergyofSaving, Crompton Controls at your serviceâ&#x20AC;Ś aesthetic design always comes first. enhancing your products appearance. In short the Series 3000 incorporates everything we have learnt about starters from many years of experience to give you even more for your money! We are well represented in the UK by our own professional team of sales engineers, product engineering personnel and a national Distributor network ensuring that wherever you are we can provide support just around the corner! We are here to serve TM TM you be it a simple contactor solar or a complete drive system,

Your Specialist in Control Solutions

This is Crompton Controls

Standard Starters

4Direct-on-Line Standard Starters

Standard Starters

• WEATHERPROOF IP55 • Single Phase or Three Phase • Surface Mounting Type: 3DL • Standard Coil Voltages: 50/60Hz • Built in Start/Stop Reset Push buttons • Hand reset thermal overloads

Direct-on-Line

Max FLC Approx. • WEATHERPROOF IP55 (hp) (415V 3ph) kW • Surface Mounting Type: 3DL • Built in Reset(7.5) Push buttons 12Start/Stop 5.5 18

7.5

Max FLC

Approx.

(415V 3ph)

12 40 18 50 25 55 32 80 40100 50140

(10)

Without Isolator & Mains Fuses With Isolator With Isolator & Fuses •Type Single Phase or Three • Colour RAL7035Price Light £Grey PricePhase £ Type Price £ Type • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request • Hand -reset overloads • Provision control 3DL1 - - Ifor remote 3DL1 - - F 3DL1 - S thermal £67.90 £197.00 £151.50 3DL2

-- S

£81.80

3DL3

-- S

£88.30

Without Isolator & Mains Fuses

(15)

Type

(hp)

15 (20) 5.5 18.5 (7.5) (25) 7.5 26 (10)(35)

3DL4 - - S 3DL1 -- S 3DLA5 -- S 3DL2 -- S 3DL5 -- S

11 30 (15)(40) 15 37 (20)(50) 18.5 55 (25)(75)

3DL3 -- S 3DL6 -- S 3DL4 -- S 3DL07 -- S

55180 80200

26 75 (35) (100) 30 90 (40) (125) 37110 (50) (150)

100220 140

55132 (75) (175) 75 (100)

• Colour RAL7035 Light Grey • 24V, 48V, 110V, 230V, 400V, 440V and more • Provision for remote control

3DLA5 -- S 3DL08 -- S 3DL5 -- S 3DL09 -- S 3DL6 -- S 3DL10 -- S 3DL07 -- S 3DL11 -- S 3DL08 -- S 3DL12 -- S 3DL09 - - S

3DL2

-- I

£162.90

3DL3

-- I

£166.70

With Isolator

Price £

Type

£122.70 66.00 £208.00

3DL4 - - I 3DL1 - - I- - I 3DLA5 3DL2 3DL5- - I- - I

79.50 £252.00 85.80 £315.00

3DL3 3DL6- - I- - I 3DL4 - - I- - I 3DL07 3DLA5 - - I- - I 3DL08 3DL5 - - I- - I 3DL09

119.20 £393.00 202.00 £518.00 245.00 £669.00 306.00 £946.00 382.00 £1,003.00 503.00 £1,074.00

3DL6 - - I- - I 3DL10 3DL07 - - I- - I 3DL11 3DL08 - - I- - I 3DL12

650.00

3DL09 - - I

180 a starter90 (125)without overload,3DL10 919.00 3DL10 - - I - Deduct: £30.30 Where is required deduct- - S Up to 18 amps - Deduct: £33.00 the overload price as follows: 3DL11 - - S 19 to 25 amps 200appropriate 110 (150) 975.00 3DL11 - - I 220

132

3DL12 - - S

(175)

Where a starter is required without overload, deduct the appropriate overload price as follows:

£189.90 147.20 £308.00

158.30 £393.00 162.00 £436.00 184.50 £535.00 299.00 £791 .00 382.00 £1,131.00 424.00 £1,407.00 520.00 £1,568.00 769.00 £1,695.00 1,099.00

W x D (mm)

-- F

Type

3DL4 - - F 3DL1 -- F 3DLA5 -- F 3DL2 3DL5- - F -- F

3DL3 3DL6- - F -- F 3DL4 -- F 3DL07 -- F 3DLA5 -- F 3DL08 -- F 3DL5 -- F 3DL09 -- F 3DL6 -- F 3DL10 -- F 3DL07 -- F 3DL11 -- F 3DL08 -- F 3DL12 -- F 3DL09 - - F

£240.00 £262.00

Price £

£295.00 191.50 £376.00 233.00 £533.00

255.00 £573.00 287.00 £831.00 365.00 £1,159.00 518.00 £1,502.00 557.00 £1,679.00 808.00 £1,864.00 1,126.00 £2,221.00 1,460.00

1,367.00 -F 1,632.00 For Direct-on-Line3DL10 Starters- above 132kW – P.O.A. 1,524.00 3DL11 - - F 1,811.00

3DL12 - - I

1,647.00

Up to 18 amps - Deduct: £29.40 18 to 25 amps - Deduct: £32.10

Pressed Steel Enclosure Dimensions Ref

1,044.00

Price £

3DL2

3DL3

With Isolator & Fuses

3DL12 - - F

2,158.00

For Direct-on-Line Starters above 132kW – P.O.A.

Fixings 4 x 4.5mm Diameter H

x W (mm)

Size 1

174 x 104 x 134

130 x 60

Size 2

184 x 184 x 149

140 x 140

Size 3

184 x 284 x 149

140 x 240

Size 4

305 x 285 x 159

260 x 240

Note: Highlighted are Crompton Controlssteel pressed with removable Note: Highlighted EnclosuresEnclosures are Crompton Controls pressed with steel removable Pressed Steel Enclosure Dimensions lids. All others have Hinged doors with dimensions on request lids. All others have Hinged doors with dimensions available available on request

Ref

Star Delta Standard Starters

W x D (mm)

Fixings 4 x 4.5mm Diameter H

x W (mm)

Size 1

174 x 104 x 134

130 x 60

Size 2

184 x 184 x 149

140 x 140

Size 3

184 x 284 x 149

140 x 240

Size 4

305 x 285 x 159 260 x 240 • Wye-Delta Connected • WEATHERPROOF IP55 (Interiors: IP00) • Three Phase • Surface Mounting Coil Voltages: 50/60Hz• Wye-Delta • 24V, 48V, Type: 3SDONLY: IP00) • •Standard 110V, 230V, 400V, 440V and more • WEATHERPROOF IP55 (INTERIORS Three Phase Connected • BuiltMounting • Provision • Surface Type: 3SD Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 400V, 440V others on request in Start/Stop Reset Push buttons • •Hand reset thermal overloads for230V, remote control • Built in Start/Stop Reset Push buttons • Hand reset thermal overloads • Provision for remote control Max FLC Approx. Without Isolator & Mains Fuses With Isolator With Isolator & Fuses (Interior Only)With Isolator (Interior Only) With Isolator & Fuses (Interior Only) Max415 FLCV Without Isolator & Mains Fuses 3ph Approx. kW (hp) Type Price(Interior £ Price £ Type Price £ Price £ Type Price £ Price £ 415V Only) (Interior Only) (Interior Only)

Star-Delta

3ph21 kW11 (hp)(15)

Type £ Price £ (£229) 3SD1 - - S Price£264

21 30

11 15 (15)(20)

3SD2 - - S 257.00 £273(223.00) (£238) 3SD1 -- S

Type 3SD1

3SD2- - I- - I 307.00 £322(274.00) (£291) 3SD1

£ Price £ (£282) - - IPrice£316

Type 3SD1

3SD2 £376 (313.00) (£329) 3SD1 - - F- - F 345.00

£ Price £ (£322) - - FPrice£355

30 43

15 22 (20)(30)

£318(231.00) (£282) 3SD3 - - S 265.00 3SD2 -- S

£439(283.00) (£398) 3SD3- - I- - I 313.00 3SD2

£595 (320.00) (£571) 3SD3 3SD2 - - F- - F 365.00

43 55

22 30 (30)(40)

3SD4 - - S 309.00 £412(274.00) (£376) 3SD3 -- S

3SD4- - I- - I 427.00 £593(387.00) (£556) 3SD3

3SD04 £694 (555.00) (£651) 3SD3 - - F- - F 578.00

55 69

30 37 (40)(50)

£525(365.00) (£489) 3SDA5 3SD4 - - S- - S 400.00

£702(540.00) (£665) 3SDA5 3SD4 - - I- - I 576.00

£887 (633.00) (£846) 3SDA5 3SD04 - - F- - F 674.00

69 85

37 45 (50)(60)

3SD05 - - S 510.00 £548(475.00) (£508) 3SDA5 -- S

3SD05 £725(646.00) (£685) 3SDA5 - - I- - I 682.00

3SD05 £912 (822.00) (£871) 3SDA5 - - F- - F 862.00

85 98

45 55 (60)(75)

£723(494.00) (£679) 3SD06 - - S 533.00 3SD05 -- S

3SD06 £1,051(666.00) (£1,019) 3SD05 - - I- - I 705.00

£1,243 (846.00) (£1,209) 3SD06 3SD05 - - F- - F 886.00

98138

(100) 55 75 (75)

3SD07 - - S 703.00 £883(660.00) 3SD06 -- S

3SD07 I £1,239(990.00) 3SD06 - - I- - 1,021.00

3SD07 £1,608(1,175.00) 3SD06 - - F- - F1,208.00

138160

(125) 75 90 (100)

£968 3SD08 - - S 858.00 3SD07 -- S

3SD08 I £1,509 3SD07 - - I- - 1,204.00

3SD08 £1,876 3SD07 - - F- - F1,563.00

160208

(150) 90110 (125)

3SD09 - - S 941.00 £1,168 3SD08 -- S

3SD09 I £1,730 3SD08 - - I- - 1,466.00

3SD09 £2,084 3SD08 - - F- - F1,823.00

(175) 208250 110150 (150)

3SD10 - - S1,135.00 £1,795 3SD09 -- S

3SD10 I £3,089 3SD09 - - I- - 1,681.00

3SD10 £3,787 3SD09 - - F- - F2,025.00

(250) 250310 150185 (175)

3SD10 - - S1,744.00 £1,795 3SD10 -- S

3SD10 I £3,089 3SD10 - - I- - 3,002.00

3SD10 £3,787 3SD10 - - F- - F3,680.00

(287) 310346 185200 (250)

3SD11 - - S1,744.00 £1,864 3SD10 -- S

3SD11 I £3,193 3SD10 - - I- - 3,002.00

3SD11 £3,957 3SD10 - - F- - F3,680.00

(300) 346380 200220 (287)

3SD12 - - S1,811.00 £1,978 3SD11 -- S

3SD12 I £3,249 3SD11 - - I- - 3,103.00

3SD12 £4,127 3SD11 - - F- - F3,845.00

380

3SD12 - - S

3SD12 - - I

220

(300)

1,922.00

3,157.00

Where a starter is required without overload, deduct For Star Delta Starters above 220kW and Interiors Where starter is required For only Star above Delta Starters 55kW – above P.O.A.220kW and Interiors the aappropriate overloadwithout price asoverload, follows deduct the Up appropriate overload price as follows: only above 55kW – P.O.A. to 30 amps - Deduct: £30.30 Up to - Deduct: £29.40 3130 to amps 43 amps - Deduct: £33.00 31 to 43 amps - Deduct: £32.10

3SD12 - - F

4,011.00

For high inertia/long run up times please refer to our For design high inertia/long engineers.run up times please refer to our design engineers.

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras TM

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Direct-on-Line Reversing Standard Starters

Standard Starters

WEATHERPROOF IP55 Surface Mounting Type: 3DR Sheet steel enclosure Hand reset thermal overloads

• • • •

• Colour RAL7035 Light Grey Single Phase or Three Phase • 24V, 48V, 110V, 230V, 400V, 440V and more Standard Coil Voltages: 50/60Hz Built in Forward/Stop Reset/Reverse push buttons Provision for remote control

Direct-on-Line Reversing

• WEATHERPROOF IP55 Max FLC Approx. • Surface Mounting Type: 3DR (415V 3ph) steelkW (hp) • Sheet enclosure •12 Hand reset thermal overloads 5.5 (7.5) 18

7.5

Max FLC

(415V 3ph) 12

• Single Phase or Three Phase • Colour RAL7035 Light Grey With Isolator & Fuses Without Isolator With Isolator • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request Type• Built in Forward/Stop Price £ Typepush buttons Price £ Type Price £ Reset/Reverse for remote control 3DR1• -Provision -S £135.00 3DR1 - - I £203 3DR1 - - F £276

(10)

3DR2 - - S

£138.60

3DR2 - - I

£207

3DR2 - - F

£280

(15)

3DR3 - - S

£208.00

3DR3 - - I

£272

3DR3 - - F

£439

3DR4 - - I 3DR1 - - I

£338 196.90

3DR4 - - F 3DR1 - - F

£504 268.00

3DR2Available - - S as134.70 3DR2 - - I Up/Stop/Down text combinations on request 3DR3 - - I 3DR3plus - - other S 202.00

201.00

3DR2 - - F

272.00

264.00

3DR3 - - F

427.00

3DR4 - - S

328.00

3DR4 - - F

490.00

Approx.

Without Isolator

Type

(hp)

Price £

Type

3DR4 - - S £299.00 3DR1 - - S 131.20

(20) 5.5 (7.5)

18 as 480/1/507.5 (10) Not available For Reversing 25 Starters above 11 15kW (15)– P.O.A. 32

With Isolator

(20)

Not available as 480/1/50 For Reversing Starters above 15kW – P.O.A.

291.00

3DR4 - - I

With Isolator & Fuses

Price £

Type

Price £

Available as Up/Stop/Down plus other text combinations on request

Conveyors

Conveyors Roller Doors

Two speed dual wound • • • •

WEATHERPROOF IP55 Surface Mounting Type: 3DW Sheet steel enclosure Hand reset thermal overloads

• • • •

• Colour RAL7035 Light Grey Three Phase Roller Doors • 24V, 48V, 110V, 230V, 400V, 440V and more Standard Coil Voltages: 50/60Hz Built in High/Stop Reset/Low push buttons Provision for remote control

Two speed dual wound

Max FLC Approx. Without Isolator With Isolator • WEATHERPROOF IP55 • Three Phase • Colour RAL7035 Light Grey (415V 3ph) kW (hp) Type Price £ Price £ • Surface Mounting Type: 3DW • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, Type 400V, 440V others on request • Sheet built in High/Stop Reset/Low • Hand reset thermal overloads •– Provision for remote 3DW1 – – I £241 control 12 steel enclosure 5.5 with (7.5) 3DW1 – push – – Sbuttons £189.10 18 Max FLC

7.5

(415V 3ph)

3DW2 – – – S Without Isolator

(10) Approx.

(hp)

For Two Speed Dual Wound Starters above 12 5.5 (7.5) 7.5kW – P.O.A.

7.5

(10)

7.5kW – P.O.A.

WEATHERPROOF IP55 Surface Mounting Type: 3PC Sheet steel enclosure • WEATHERPROOF Hand reset thermalIP55 overloads

• • • •

£254

3DW2 – – – I With Isolator

Type

Price £

Type

3DW1 – – – S

175.00

3DW1 – – – I

223.00

3DW2 – – – S

188.20

3DW2 – – – I

235.00

FLC required for high & low speeds.

For Twospeed Speed Dual Wound Starterschange above Two pole

• • • •

£203.00

Fans

FLC required for high & low speeds.

Price £

Pumps

Machine Tools

• Colour RAL7035 Light Grey Three Phase • 24V, 48V, 110V, 230V, 400V, 440V and more Standard Coil Voltages: 50/60Hz Fans Pumps Machine Tools Built in High/Stop Reset/Low push buttons • Three Phase • Colour RAL7035 Light Grey Provision for remote control

Two speed pole change

• Surface Mounting Type: 3PC • Standard Coil Voltages: 50/60Hz • Sheet Low push buttons Max FLC steel enclosure Approx.with built in High/Stop Reset/ Without Isolator

(415V 3ph) Max FLC 12 (415V 3ph) 18 25

12 18 25

Type Without Isolator 3PC1 –––S Type

(hp) Approx. 5.5 kW (7.5) (hp) 7.5 11

5.5 7.5

• 24V, 48V, 110V, 230V, 400V, 440V others on request • Hand reset thermal overloads With Isolator • Provision for remote control

Price £

(15) (10)

3PC2 – – – S 3PC1 – – – S 3PC3 – – – S 3PC2 – – – S

£325 Price £ £338 301.00 £368 312.00

(15)

3PC3 – – – S

341.00

(10)

(7.5)

Type With Isolator 3PC1 –––I Type

Price £

I ––I I ––I

£394 Price £ £416 365.00 £474 385.00

3PC3 – – – I

439.00

3PC2 – – 3PC1 3PC3 – – 3PC2

– – – –

For Two Speed Pole Change Starters above 11kW – P.O.A. Please Note: Overload setting range - High Speed Overload first in the code reference Motor Connection details required. and to be rated half the Full Load Current of the motor. Please Note: Overload setting range. High speed For Two Speed Pole Change Starters above 11kW – P.O.A. overload rated half full load current of motor. Motor Connection details required.

Single Phase Series Parallel Single Phase Series Parallel • WEATHERPROOF IP55 • Single Phase • WEATHERPROOF IP55 • Surface Mounting Type: 3SP • Surface Mounting Type: 3SP • Built in Start/Stop buttons • Built in Start/StopReset Reset push push buttons

Approx. MaxMax FLCFLC Approx. (240V (240V 1ph)1ph) kW kW (hp) (hp) 24 24 30 32

3.7 3.7(5) (5) (7.5) 5.5 5.5(7.5)

• Single Phase • Coil Voltages: (50/60Hz) • Coil Voltages: (50/60Hz) • Hand reset thermal • Hand reset thermaloverloads overloads

• Capacitor start/capacitor run or Induction run • Capacitor start/capacitor run or Induction run • 100/110V, 220/230V, 480V • 100/110V, 220/230V, 480V • Provision forforremote • Provision remotecontrol control

Without Isolator Without Isolator Type Price Type Price £ £

Isolator WithWith Isolator Type Price Type Price £ £

Isolator & Fuses WithWith Isolator & Fuses Type Price Type Price £ £

3SP1 257.00 3SP1 – –– S – S £278 3SP2 265.00 3SP2 – –– S – S £286

3SP1 362.00 3SP1 ––– I – I £391 3SP2 376.00 3SP2 ––– I – I £406

3SP1 – – F£437 405.00 3SP1 ––F 3SP2 – – F£476 441.00 3SP2 ––F

For motor frame sizes D160/180 & Electrodrives Please Note: Overload setting range. Overload rated – P.O.A. For motor frame sizes D160/180 & Electrodrives halfNote: full load current of motor. Please Overload setting range. Overload rated half full motors load current of motor. motors – P.O.A. For Single Phase Series Parallel Starters above For Single Phase Series Parallel Starters above 5.5kW – P.O.A. 5.5kW – P.O.A.

Grain Irrigation Irrigation Grain Drying Pumps Pumps Drying Fans Fans

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras

Refer to Page 31 for a Complete List of Standard Starter Codes & Optional Extras

Standard Starters

• • • •

Standard Starters

4Direct-on-Line Special Application Starters

Standard Starters

Direct-on-Line Duty Standby • WEATHERPROOF IP55

• Surface Mounting Type: 3DS Direct-on-Line • Sheet steel enclosure

• WEATHERPROOF IP55 • Two Motor D-O-L • Surface Mounting Type: 3DL • Built in Start/Stop Reset Push buttons Max FLC Approx. (415V 3ph) Max FLC Approx. (415V 3ph)12 kW 18

• Single Phase or Three Phase • Colour RAL7035 Light Grey • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V and more • Hand reset thermal overloads • Provision for remote control • Single Phase or Three Phase • Colour RAL7035 Light Grey • Duty Selector, Run Lamps & Reset push buttons • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request • Hand reset thermal overloads • Provision for remote control Without Isolator With Isolator

(hp) Without Isolator Type & Mains Fuses

(7.5) Type

(hp)5.5

PriceIsolator £ With

Price 3DS1 - - S£

Type £218

TypeWith Isolator & Fuses Price £ Price £

3DS1Type -- I

Price £268 £

£225 - - I 3DL1

£278 191.50

3DL1

-- S

3DS266.00 -- S

147.20

3DS2 3DL1 -- I

(10)

3DL2

-- S

79.50

3DL2

-- I

158.30

3DL2

7.5 (7.5)

5.5

(10)

-- F -- F

233.00

(15)

3DL3

-- S

85.80

3DL3

-- I

162.00

3DL3

-- F

255.00

(20)

3DL4

-- S

119.20

3DL4

-- I

184.50

3DL4

-- F

7.5

For Duty Stand Starters above 7.5kW - P.O.A

Duty Standby Starters are a dedicated starter for standard Dual Pump Control systems. 299.00 40 18.5 (25) 3DLA5 - - S 202.00 3DLA5 - - I 3DLA5 - - F Operates the manually selected Duty pump and automatically switches over to the standby 50 26 (35) 3DL5 - - S 245.00 3DL5 - - I 382.00 3DL5 - - F pump in the event of the duty pump tripping306.00 out on overload. 55 30 (40) 3DL6 - - S 3DL6 - - I 424.00 3DL6 - - F This is the37most basic pump 3DL07 control product382.00 available, specially customised or branded 3DL07 - - F 80 (50) -- S 3DL07 - - I 520.00 products are available incorporating duty assist, timed duty rotation, level switch control, 100 55 (75) 3DL08 - - S 503.00 3DL08 - - I 769.00 3DL08 - - F status indication, signalling, 3DL09 soft start/stop, variable speed3DL09 pressure/flow control, sleep3DL09 - - F 140 75 (100) -- S 650.00 -- I 1,099.00 function and pump3DL10 protection from919.00 dry running, blockage cavitation on request. 180 90 advanced (125) -- S 3DL10 - - I and1,367.00 3DL10 - - F Please contact us to discuss your requirements. 200 110 (150) 3DL11specific -- S 975.00 3DL11 - - I 1,524.00 3DL11 - - F 220

132

3DL12 - - S

(175)

Where a starter is required without overload, deduct the appropriate overload price as follows:

1,044.00

3DL12 - - I

1,647.00

Up to 18 amps - Deduct: £29.40

Max FLC

Approx. kW

5.5

7.5

(hp)

Without Isolator

With Isolator

Type

Price £

1,460.00 1,632.00 1,811.00

Pumps 2,158.00

Type

3FS1 - - I

£297

3FS1 - - F

£344

(10)

3FS2 - - S

£223

3FS2 - - I

£305

3FS2 - - F

£382

(15)

3FS3 - - S

£256

3FS3 - - I

£339

3FS3 - - F

£415

• WEATHERPROOF IP55 (INTERIORS ONLY: IP00) • Three Phase • Surface Mounting Type: 3SD • Standard Coil Voltages: 50/60Hz • Built in Start/Stop Reset Push buttons • Hand reset thermal overloads

OPTIONS: Timer only Ref. FS2M, TI129 400V - £95.10 TI128 230V - £95.10 TI127 110V - £95.10

Dimensions

Direct-on-Line Flush mounted

3SD1 - - S

(15)

30 Max 15 (20) 3SD2 - - S FLC Approx. 43(415V22 3ph) (30) kW 3SD3 (hp) - - S 55 30 (40) 3SD4 - - S

(50)

(60)

(75)

5.5 7.5

138Flush75Mounting (100)

(7.5)

257.00

x W (mm)

130 x 60 140 x 140 140 x 240

Fans 260 x 240

With Isolator & Fuses

(Interior Only) Price £ Price £

Type

3SD1

-- I

307.00 (274.00)

3SD1

-- F

345.00

(313.00)

-- I

313.00 (283.00)

3SD2

-- F

365.00

(320.00)

-Price -I £427.00 (387.00) -- I 576.00 (540.00)

3SD3

-- F

578.00

(555.00)

3SD04 - - F

674.00

(633.00)

682.00 (646.00)

3SDA5 - - F

862.00

(822.00)

886.00

(846.00)

(365.00)

3SD4

3SDA5 - - I 3SD05 - - I

705.00 (666.00)

3SD05 - - F

3SD06 - - I

1,021.00 (990.00)

3SD06 - - F

1,208.00 (1,175.00)

-- I

1,204.00

3SD07 - - F

1,563.00

-- I

1,466.00

3SD08 - - F

1,823.00

-- I

1,681.00

3SD09 - - F

2,025.00

-- I

3,002.00

3SD10 - - F

3,680.00

3DF1 - - S

3SDA5 - - S

510.00

3SD05 - - S

533.00

(475.00) 3DF2 - - S (494.00)

3SD06 - - S

703.00

(660.00)

(10)

Fixings 4 x 4.5mm Diameter

265.00 All (231.00) 3SD2 steel enclosure 309.00 Type (274.00) 3SD3 400.00

(223.00)

Timer Only Ref. FS2M

• Wye-Delta Connected • 24V, 48V, 110V, 230V, 400V, 440V others on request • Provision for remote control

• WEATHERPROOF IP55 • Flush Mounting Type: 3DF Max FLC Phase or Three Without & Mains With440V Isolator • Single Phase Isolator • 24V, 48V, Fuses 110V, 230V, 400V, others on request 415V Approx. (Interior (Interior Only) • Standard Coil Voltages: 50/60Hz • Overload currentOnly) ranges 0.14 - 18 amps 3ph kW (hp) Type Price £ Price £ Type Price £ Price £ • Pressed steel lid, formed sheet steel base 11

Price £

£219

Star-Delta

1,126.00

With Isolator & Fuses

Price £

Direct-on-line Fan Shakers are a dedicated starter forRef Dust Extraction H x W x D (mm) applications. Operates main extraction fan motors and the Sizecollection 1 174 xbag 104 x 134 shaker or filter clean motors at the end of fan run down Size periods. 2 184 x 184 x 149 Fully automatic unit with independently adjustable fan down andx 149 Sizerun 3 184 x 284 shake/clean times. Specially customised or branded products available. Size 4 305 x 285 x 159

Fans

808.00

3FS1 - - S

(7.5)

Shaker overload up to 1.6 amps add £30.30 *Standard Offer includes: Neon Lamp – Shaker Tripped – £17.20 Fan Contactor and Overload Emergency Stop - P.O.A. Shaker Contactor and Timer Any combination available on request. For low voltage Fan Shaker Starters please consult our Design Engineers. Note: Highlighted Enclosures are Crompton Controls pressed steel with removable Pressed Steel Enclosure lids. All others have Hinged doors with dimensions available on request

557.00

WEATHERPROOF IP55 • Single Phase or Three Phase • Colour RAL7035 Light Grey Surface Mounting Type: 3FS • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V and more Overload current ranges: 0.16 to 25 amps • Two Motor D-O-L Timer Single Unit - Run Down Time Adjustable to 2 Minutes - Shake Time Adjustable to 1 Minute

(415V 3ph)

518.00

For Direct-on-Line Starters above 132kW – P.O.A.

18 to 25 amps - Deduct: £32.10 Direct-on-Line Fan Shaker

• • • •

3DL12 - - F

287.00 365.00

£91.10

£108.00

Starters to fit into small 3SD07 - -are S designed 858.00 3SD07 to provide a 3SD08 neat station with all fixing and cabling 208outer 110operator (150) control 3SD09 - - S 1,135.00 3SD09 250components 150 (175) hidden 3SD10 - - Sinside 1,744.00 3SD10 away

frameworks and 160machine 90 (125) 3SD08 - - S castings 941.00 310

185

(250)

3SD10 - - S

1,744.00

3SD10 - - I

3,002.00

3SD10 - - F

3,680.00

346

200

(287)

3SD11 - - S

1,811.00

3SD11 - - I

3,103.00

3SD11 - - F

3,845.00

380

220

(300)

3SD12 - - S

1,922.00

3SD12 - - I

3,157.00

3SD12 - - F

4,011.00

Machine Tools

Where a starter is required without overload, deduct For Star Delta Starters above 220kW and Interiors For high inertia/long run up times please refer to our the appropriate overload price as follows: 55kW – Starter P.O.A. engineers. Refer to Page 31 for a Complete Listonly of above Standard Codes & Optional design Extras Up to 30 amps - Deduct: £29.40 31 to 43 amps - Deduct: £32.10

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras TM

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Hazardous Area Equipment

Direct-on-Line Reversing WEATHERPROOF IP55 • Single Phase or Three Phase ATEX Approved Control Equipment Surface Mounting Type: 3DR • Standard Coil Voltages: 50/60Hz • • • •

• Colour RAL7035 Light Grey • 24V, 48V, 110V, 230V, 400V, 440V others on request • Built in Forward/Stop Reset/Reverse push buttons • Provision for remote control

Sheet steel enclosure Suitable for Zone 1 and 21 Applications EEx d II 2GD IP65 T6 up to 50ºC Hand reset thermal overloads

Max FLC

Approx.

Without Isolator

With Isolator

Direct-on-Line Types: (415V 3ph) kW (hp)Surface Mounting Type PriceDLF £ 12 Max FLC

5.5 Approx.

(7.5)

(415V 18 3ph)

kW 7.5

(10) (hp)

3DR2 -- S Type

3DR1 - - S Isolator 131.20 Without

12 25 18 32

11 5.5

(15) (7.5)

3DR33DLF1 - - S --202.00 S 3DR43DLF2 - - S --291.00 S

15 (20) 7.5 (10) 25 11 (15) Not available as 480/1/50 30Reversing Starters 15 above(20) For 15kW – P.O.A. 50 26 (35) 55 30 (40) 80 37 (50) 100 55 (75) 140 75 (100) 180 90 (125) 200 110 (150) 220 132 (175)

134.70

With Isolator & Fuses

Type Price £ £508 £541 £765

Price £

Type

Price £

3DR1 - - I

196.90 With Isolator

3DR1 - - F

268.00

3DR2 - - I

201.00 Type

3DR2 Price -£- F

272.00

3DR3 - - I

264.00 3DLF1 -- I

3DR3 -- F £931

3DR4 - - I

3DLF3 -- S Available as Up/Stop/Down 3DLF4 -- S text combinations £1,136 plus other on request £1,503 3DLF5 -- S £1,662 3DLF6 -- S £1,989 3DLF07-CCS £2,094 3DLF08-CES £5,590 3DLF09-CFS 3DLF10-CGS P.O.A. 3DLF11-CGS P.O.A. 3DLF12-CHS P.O.A.

328.00 3DLF2 -- I 3DLF3 -- I 3DLF4 -- I 3DLF5 -- I 3DLF6 -- I 3DLF07-CCI 3DLF08-CEI 3DLF09-CFI 3DLF10-CGI 3DLF11-CGI 3DLF12-CHI

3DR4 -- F £975

£1,010 £2,024 £2,304 £2,617 £2,885 £3,309 £7,477 P.O.A. Conveyors P.O.A. P.O.A.

Star-Delta Surface Mounting Types: SDF Max FLC

Approx.

(415V 3ph)

Roller Doors

Without Isolator Type

(hp)

427.00 490.00

With Isolator Price £

Type

Price £

Two speed dual wound

£2,550 21 11 (15) 3SDF1 -- S 3SDF1 -- I £1,626 £1,681 £2,617 30 15 (20) 3SDF2 -- S 3SDF2 -- I • WEATHERPROOF IP55 • Three Phase • Colour RAL7035 Light Grey £1,832 43 22 (30) 3SDF3 -- S 3SDF3 -- I £2,897 • Surface Mounting Type: 3DW • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request £3,248 £2,183 55 30 3SDF4 -- Spush buttons 3SDF4overloads -- I • Sheet steel enclosure with(40) built in High/Stop Reset/Low • Hand reset thermal • Provision for remote control £4,598 £6,288 69 37 (50) 3SDF05-LSS 3SDF05-LSI 85 45 (60) 3SDF05-LTI 3SDF05-LTS Max FLC Approx. Without Isolator £4,598 With Isolator £6,639 £6,801 98 06-CBS 3SDF06-CBI 3SDFType £5,228 Price £ (415V 3ph) 55 kW (70)(hp) Type Price £ £5,620 £7,232 138 3SDF07-CDS 3SDF07-CDI 75 (100) 12 5.5 (7.5) 3DW1 – – – S 175.00 3DW1 – – – I 223.00 P.O.A. 160 90 (125) 3SDF08-CDS 3SDF08-CDI P.O.A. 18 7.5 (10) 3DW2 – – – S 188.20 3DW2 – – – I 235.00 208 110 (150) 3SDF09-CFS P.O.A. 3SDF09-CFI P.O.A. 250 150 (175) 3SDF10-CFS P.O.A. 3SDF10-CFSI P.O.A. For Two Speed Dual Wound Starters above FLC required for high & low speeds. P.O.A. 310– P.O.A. 185 (250) 3SDF10-CGS 3SDF10-CGI P.O.A. 7.5kW

Two speed pole change Control Stations - Thermoplastic

Fans

• WEATHERPROOF IP55 • Three Phase • Surface Mounting Type: 3PC • Standard Coil Voltages: 50/60Hz Type Reference Cable Entries/Contacts • Sheet steel with built in High/Stop Low push buttons Emergency Stop enclosureFPPBS1ES 1 x M20 Reset/ Bottom/1NO+1NC FPPBS2SS Approx. kWFBPBS3SSL (hp) FPI1S 5.5 (7.5)

Stop/Start Max FLC Stop/Start/Lamp (415V 3ph) Isolator Switch 12 18 25

7.5 11

3PC3 – – – S

(15)

341.00

With Isolator Type

Price £

3PC1 – – – I

365.00

3PC2 – – – I

385.00

3PC3 – – – I

439.00

For Two Speed Pole Change Starters above 11kW – P.O.A. Motor Connection details required.

Please Note: Overload setting range. High speed Suitable for:

• • • • • • •

Machine Tools

• Colour RAL7035 Light Grey Price • 24V, 48V,£110V, 230V, 400V, 440V others on request • Hand reset thermal overloads • Provision for remote control P.O.A.

1 x M20 Bottom/1NO+1NC P.O.A. Without Isolator 1 x M20 Bottom/1NO+1NC+Lamp Bottom/1NO+1NC+La mp Price £P.O.A. Type P.O.A. 1 x M20 Bottom 3PC1 – – – S 301.00 4 pole 16A max Pad-lockable 3PC2 – – – S 312.00

(10)

Pumps

overload rated half full load current of motor.

II 2G EEx edm IIC T6 II 2D IP66 T80 Deg C A Ex edm IIC/Ex edm IIC • WEATHERPROOF IP55 • Single Phase • Capacitor start/capacitor run or Induction run Class I Zone 1 • Surface Mounting Type: 3SP • Coil Voltages: (50/60Hz) • 100/110V, 220/230V, 480V Class I, Div.2 Groups A,B,C,D • Built in Start/Stop Reset push buttons • Hand reset thermal overloads • Provision for remote control Cert: PTB 00 ATEX 1068 Amb. -55 Approx. to +60 Deg C Without Isolator MaxTemp: FLC With Isolator With Isolator & Fuses to +60 Zone 21 & 22) (240V 1ph) (-20kW (hp)Deg C for Type Price £ Type Price £ Type Price £ • Custom built equipment available on request.

Single Phase Series Parallel

3.7

(5)

3SP1 – – S

257.00

3SP1 – – I

362.00

3SP1 – – F

405.00

5.5

(7.5)

3SP2 – – S

265.00

3SP2 – – I

376.00

3SP2 – – F

441.00

Please Note: Overload setting range. Overload rated half full load current of motor. For Single Phase Series Parallel Starters above 5.5kW – P.O.A.

For motor frame sizes D160/180 & Electrodrives motors – P.O.A.

Grain Drying Fans

Your Specialist in Control Solutions

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras

www.cromptoncontrols.co.uk

Tel:

Irrigation Pumps

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Hazardous Area Equipment

Standard Starters

8Market Leading S10 Brakes

Market Leading Standard & Customised DC

Crompton Controls have manufactured DC Injection Brakes for over 50 years and are now a recognised market leader. All our products have been designed and developed in house and provide rapidhave controlled braking of AC electric motors driving rotating industrial machines. Crompton Controls manufactured DC Injection Brakes for over 50 years and are now a recognised market leader. All Braking our products have beenhave designed and developed in house Systems been provided to thousands and provide rapid controlled braking of AC electric motors users for Controlled Safety Stopping in accordance driving rotating industrial machines.

of Woodworking Machine suppliers and with the the requirement of PUWER 98. As a result we have many During the last decade we have provided Braking Systems customised control solutions available. to thousands of Woodworking Machine suppliers and users for Controlled Safety Stopping in accordance with the requirements of PUWER 98. As a result we have many machine Automatic D.C. Injection specific standard products along with fully customised control solutions available.

Conveyors

Brake Controllers Rotating

Winders

Conveyors

Start, protect and safely stop standard Rotating Wheels Machines

Machine

Tools Automatic D.C. Injection Brake Controllers stopping for compliance to PUWER 98 • Controlled

Mixers

Winders Machine Tools

Mixers

• IP55 Dust proof • Compact surface mounting enclosures for easy retrofitting Start, protect and safely stop standard Rotating Machines • Complete with integral Start and Stop push buttons • Controlled stopping for compliance to PUWER 98 •settin IP55g Dust proof braking time and torque • Simple • Compact surface mounting enclosures for easy retrofitting Rotating • Suitable for up to 12 stops per hour • Complete Wheelswith integral Start and Stop push buttons • Simple braking time and torque setting • Suitable for up to 12 stops per hour

In 3DCM, 3DPM & 3DYM "M" denotes S10 Brake Module fitted. For Crosscut saws or similar with increased

stopping rates alternative & Control cards are required. Deduct "M" from code and use price in brackets. Direct-on-Line ThreePower Phase 400V/3ph/50Hz Motor

Motor Rating

Starter

Direct-on-Line Three Phase kW Type Price £

FLC

Motor

Motor Rating

4.5 2.2 FLC kW 6 3 4.5 10 4 2.2 12 6 5.5 3 18 10 7.5 4 25 12 11 5.5 32 18 15 7.5 40 25 22 11 32 15 Typical40applications 22 -

Starter

Motor

Motor Rating kW

Motor Rating

5 0.5 FLC kW 12 1.5 6 16 2.2 0.5 12 1.5 Typical applications2.218

Starter

Type

Starter

Price £

Motor Rating Starter Star Delta Three Phase kW Type Motor

Motor Rating

13 5.5 FLC kW 17 7.5 21 13 11 5.5 30 17 15 7.5 43 21 22 11 55 30 30 15 43 22 Typical applications 55 30

Starter

149 149149 149149 149149 159149 159149 200159 159 200

230V/1ph/50Hz 230V/1ph/50Hz

Enclosure dimensions (mm)

3DPM1CHS/10 373.00 184 Type Price £ Price £ H 3DPM1CLS/10 386.00 184 3DPM1CHS/10 389.00 £403 (£445) 3DPM2CMS/10 184 184 3DPM1CLS/10 £417 (£458) 184 Circular saws and Tenon machines £420 (£462) 184 3DPM2CMS/10

Motor

184 184184 184184 184184 285184 285184 400285 285 400

Enclosure dimensions (mm)

Typical applications - Circular saws and Tenon machines Star Delta Three Phase FLC

3DCM1EHS Type 3DCM1EJS 386.00 184 3DCM1EHS £410 3DCM1EKS 389.00 (£451)184184 3DCM1EJS £417 3DCM1ELS 412.00 (£459)184184 3DCM1EKS £420 3DCM2EMS 467.00 (£462 184184 3DCM1ELS £446 3DC3ENS 524.00 (£490)305184 3DCM2EMS £504 3DC4ECS 592.00 (£555)305184 3DC3ENS £566 3DC5ESS 813.00 400305 3DC4ECS 305 £640 Dimension and Circular 3DC5ESS 400 £879 saws

Direct-on-Line Single Phase

FLC

400V/3ph/50Hz W x D

Enclosure dimensions (mm) 379.00 184 184 149 Price £ Price £ H x W x D

Typical applications - Single Dimension Phase and Circular saws Direct-on-Line Motor

Enclosure dimensions (mm)

184 149 x W x D 184 149 184 184 149 149 184 149 184

149

400V/3ph/50Hz

Enclosure dimensions (mm)

Price £

400V/3ph/50Hz W x D

Enclosure dimensions (mm) 527.00 305 285 159 Price £ Price £ H x W x D

3DYM1EJS Type 3DYM1EKS 559.00 305 3DYM1EJS £569 (£626)500305 3DY1ELS 635.00 3DYM1EKS £604 (£665)500305 3DY2EMS 688.00 3DY1ELS £686 3DY3ENS 1,059.00 600500 3DY2EMS £743 3DY4ECS 2,285.00 700500 600 3DY3ENS £1,144 Panel and Rip saws 700 3DY4ECS £2,469

285 400285 400285 500400 500400 500 500

159 200159 200159 200200 200200 200 200

In 3DCM, & 3DYM- Type the M signifies S10 Brake Module fitted. For Crosscut Saws please omit the "M" Typical3DPM applications PanelControllers and Rip saws from the code to signify open Power & Control cards required to meet the increased stopping rates required.

DC Injection Modular Kits & Spares

DC Injection Modular Kit

Item

Part No.

Price £

S10 Brake Module 400V

BR011

£208.00

S10 Brake Module 230V

BR016

£208.00

Brake Contactor 400V Coil

CC1201-400V

£28.70

Brake Contactor 230V Coil

CC1201-230V

£28.70

Control Fuse Holder

FC014

£6.00

Control Fuse - 4A

FL071

£1.70

DB5 Driver Card 400V

BR002

£123.50

DB2 Power Card

BR003

£123.50

DB2 Control Card 400V

BR004

£123.50

www.cromptoncontrols.co.uk

Tel:

81mm

DC Injection Brakes

m 45mm

• Retrofit parts to integrate into existing controls • For single motor machines up to 7.5kW 3ph & 2.2kW 1ph

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Advanced Technology Smooth-BRAKES

Controlled Braking to a wide range of Rotating Industrial Machines to improve Three transition periods have already ended the UK for the safe ofons production efficiencies by reducing process or within tool changeover times inbraking applicati specific types of&machine last mandatory was Centrifuges, in 2008, do you comply? such as Grinding Polishingthe Machines, Mixers,deadline Conveyors, Lathes and many other Tools.saws, powered and hand- hand-fed routing machines, thicknessing machines, planing/ For circular sawMachine benches, dimension

fed cross-cut saws, single-end and double-end tenoning machines thicknessing machines and surface planing machines, the and combined machines incorporating a circular saw and/or work had to be completed no later than 5 December 2005, a tenoning attachment,Control the work had to be completed no ie 7 years after PUWER 98 came into force. Smooth-BRAKE Systems later than 5 December 2003, ie 5 years after PUWER 98 any other machine not specified above but for which the Smoothest possible braking eliminates shocks,For vibration and noise. came into force. risk assessment shows braking to be necessary, the For narrow bandsaws, re-saws, vertical spindle deadlinetype was 5 December 2008, ie 10 years after PUWER Developed to be mechanically kindmoulding to Band Resaw machines. machines (unless fitted with a manual or foot operated brake),

• • • • •

98 came into force.

Unique 3 stage automatic voltage ramp down to zero Soft application of high initial DC injection Low level final DC with surge reduction Developed tostage be mechanically kindtotozero Band Resaw • Unique 3cut stage automatic voltage ramp down Automatic off at zero speed • Soft adjustment application of high off initial DC and injection Simple – shut timer torque level potentiometers • Low level final DC stage with surge reduction

type machines

Standard Specification

• Simple adjustment – shut off timer and torque lev el potentiometers Mains Supply: 400V/3ph/50Hz Crompton Controls developed Smooth-BRAKE module Standard Specification Extremely compact IP55 Dustproof enclosures with top & bottom access Mains 400V/3ph/50Hz Star DeltaSupply: main motor starter with Stop/Start push buttons Crompton Controls developed Smooth-BRAKE Direct On Line Feeder motor starter with Stop/Startmodule push buttons Extremely compact IP55 Dustproof with top & ttom bo access Track/Run selector switch – press and enclosures hold Start to track Star Delta main motor starter with Stop/Start push buttons 110V AC control circuit via integral fused transformer Direct On Feeder starter with Stop/Start push buttons Provision for Line control frommotor external Stop/Start pushbuttons Track/Run selector switch – press and hold Start to track Braking times up to approx 50 seconds

DC injection braking is an approved method of stopping AC electric motors and requires the mains supply to be present to operate correctly.

Star Delta Smooth-BRAKE control panels, Assemblies & Modules Motor Power kW (HP) kW (HP)

Max Current FLC (DC) FLC (DC) 21

(35)

30 21

(45)(35)

(15)

15 11

(20) (15)

Approximate Dimensions (mm) H x W x D H x W x D

Type Type

Price £

SmoothBRAKE15 SmoothBRAKE11

£1,006

400400300300 240240

£436

400 300 240 100100160160 125125 74100 45160 121125

£966

SmoothBRAKE11

(45) 15 (20) SmoothBRAKE15 90 60 BR026 Brake Assembly 11/22 11/15 (15/30) (15/20) BR025 Brake Assembly ... All Control Module Only 90Ratings ... BR024 18/22 Spare (25/30) BR026 Brake Assembly

£1 94

400

300

Notes:

400V/3ph/50Hz

240

121

i) Control panels are pre-engineered and complete with Standard Specification above. ii) Brake Assemblies require additional Contactors and Fusing components for retro-fit into customer control systems in accordance with Crompton Controls ref LT011 Installation & Maintenance Instructions iii) BR024 is a spare Control Module for the current BR026 & previous BR025 Brake Assemblies

Notes:

i) Control panels are pre-engineered and complete with Standard Specification above.

D.C. Injection brakerequire units ‘SPINGUARD’ ii) Brake Assemblies additional Contactors and Fusing components for retro-fit into customer control systems in accordance with Crompton Controls ref LT011 Installation & Maintenance Instructions Includingiii) Trip Arm and Reset for Button Emergency Stopping of Spindle Drives BR024 is a spare Control Module for BR025 & BR026 Brake Assemblies Motor Rating

Ref

Price £

Motor Rating

Ref

Price £

Motor Rating

Ref

Price £

(15HP) 3SG3S Button £1,145 3SG1S £680 units7.5kW (10HP) D.C. Injection brake ‘SPINGUARD’ including Trip11kW Arm and Reset

4kW (5.5HP)

EMERGENCY STOPPING OF SPINDLE DRIVES Motor Rating

Ref

Price £

Motor Rating

4kW (5.5HP)

3SG1 - - S

660.00

7.5kW (10HP)

3SG2S

£916

Ref

Price £

Motor Rating

Ref

Price £

Your Specialist in DC Injection Braking 3SG2 - - S

848.00

11kW (15HP)

3SG3 - - S

1,060.00

DC injection braking is an approved method of stopping AC electric motors and requires the mains supply to be present to operate correctly. www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

DC Injection Brakes

Injection Systems foris Rotating Machines In addition to Braking Safety Braking, our technology also widely used to provide

8PUWER 98 DC Injection Brakes

Market Leading Standard & Customised DC

DC Injection brake control panels Designed to safely stop HEAVY DUTY Woodworking Machines

Crompton Controls have manufactured DC Injection Brakes In addition to Safety Braking, our technology is also widely for over 50 years and are now a recognised market leader. used to provide Controlled Braking to a wide range of Rotating All our products have been designed and developed in house Industrial Machines to improve production efficiencies by and provide rapid controlled braking of AC electric motors reducing process or tool changeover times in applications • Controlled stopping PUWER 98 compliance driving rotating industrial machines. such asfor Grinding & Polishing Machines, Mixers, Conveyors, • Heavy duty rated for highLathes inertias longer stopping Centrifuges, and&many other Machinetimes Tools. During the last decade we have provided Braking Systems • Star Delta Main Motor starter, Start/Stop push buttons to thousands of Woodworking Machine suppliers• and users Easy supply and motor cable connections for Controlled Safety Stopping in accordance with the • Terminals to link in external stop controls requirements of PUWER 98. As a result we have many machine • Main Motor Running contact to link to existing feeder control specific standard products along with fully customised • Optional Track/Run switch, Conveyors hold to TrackMachine push buttonMixers Rotating Windersselector control solutions available. • Optional feeder motor DOL starter with stop & start push buttons Tools Wheels

• Standard options and customised solutions available

Automatic D.C. Injection Brake Controllers

Start, protect and safely stop standard Rotating Machines • • • •

Controlled stopping for compliance to PUWER 98 • IP55 Dust proof Standard Specification Compact surface mounting enclosures for easy retrofitting Mains Supply: 400V/3ph/50Hz Complete withCircuit: integral Start and Stop buttons Control 110V AC push via integral fused transformer Simple braking time and torque setting Suitable for upincoming to 12 stops per supply hour DC brake supply: 11 – 22kW - Internally• powered from mains 30 – 37kW - Can be wired as above or separately supplied dependant Direct-on-Line Three Phase 400V/3ph/50Hz on the rating of the incoming mains supply cables and the level Motor Motor Rating Starter (mm) of DC Enclosure current dimensions required to safely brake FLC kW Type Super fast Price £ H xfuses W for x protection D Protection: semiconductor of power electronics Thermal 379.00 overload for184 protection 4.5 2.2 3DCM1EHS 184 of main 149 motor Braking3 Times: 3DCM1EJS Up to 35 386.00 seconds 11 184 – 22kW, 1 Minute 30 – 37kW 6 184Up to149 Braking4 Voltage: 3DCM1EKS Up to 160V DC maximum 10 389.00 184 184 149 Duty Cycle: Suitable 412.00 for up to 12 184 stops per 12 5.5 3DCM1ELS 184 hour149 18 25 32 40

3DCM2EMS 3DC3ENS 3DC4ECS 3DC5ESS

7.5 11 15 22

467.00 524.00 592.00 813.00

184 305 305 400

184 285 285 400

149 159 159 200

Star Delta IP55 Dust proof control panels Motor Power

Max Current

FLC kW (DC) (HP) Typical applications - Dimension and Circular saws Type 21 (55) 11 (15) Direct-on-Line Single Phase (72) (20) 30 Motor FLC

35 43

5 55 12 69 16

Motor Rating (87) kW (107) 0.5 (137) 1.5 (180) 2.2

Price £

Approximate Dimensions (mm) H x W (option) x D

£1,141 RESAW 11 230V/1ph/50Hz

600

500 (600)

200 *

600

500 (600)

200 *

£1,320

600

500 (600)

200 *

£1,375 149 £2,676 149 £2,848 149

600

500 (600)

200 *

1000

800

300

1000

800

300

£1,270 RESAWdimensions 15 Enclosure (mm)

15 Starter

18.5 (25) Type Price £ 22 (30) 3DPM1CHS/10 373.00 30 (40) 3DPM1CLS/10 386.00 37 (50) 3DPM2CMS/10 389.00

RESAW H x RESAW 184 RESAW 184 RESAW 184

18 W 22 184 30 184 37 184

Typical applications - Circular saws and Tenon machines Standard Options Star Delta Three Phase

400V/3ph/50Hz

• A Track/Run selector switch complete with hold to Track push button Motor Motor Rating Starter Enclosure dimensions (mm) •*B Feeder kW Motor DOL starter (11£- 22kW) H FLC Type up to 5.5kW Price Complete with Stop/Start Push Buttons (30 - 55kW) 13 5.5 3DYM1EJS 527.00 305 C Main Motor Thermistor Protection Relay 17 7.5 3DYM1EKS 559.00 305 21D Main Motor 11Fuse Protection: 3DY1ELS (11-22kW) 635.00 500 30 15 3DY2EMS (30-37kW) 688.00 500 43 22 3DY3ENS 1,059.00 600 55 30 3DY4ECS 2,285.00 700

285 285 400 400 500 500

Typical applications - Panelfrom and Rip saws An example Crompton’s

Price £ (Extra) £72.00 £147.10 (600mm wide enclosure) £128.30

159 159 200 200 200 200

£57.70 £83.00 (600mm wide enclosure) £128.20

comprehensive of specialist panels . Module fitted. For Crosscut Saws please omit the "M" In 3DCM,range 3DPM & 3DYM Type Controllerscontrol the M signifies S10 Brake from the code to signify open Power & Control cards required to meet the increased stopping rates required.

From simple Saws, Tenoning and Planing machines to Band Resaws, High Speed Routers and Multi-Headed DC Injection Modular Kits & Spares Moulding machines Crompton Controls can offer a • Retrofitcompetitive parts to integrate into existing controls solution. • For single motor machines up to 7.5kW 3ph & 2.2kW 1ph Item

Part No.

Price £

S10 Brake Module 400V

BR011

192.80

Please us for S10 Brakecontact Module 230V Brake Contactor 400V Coil

81mm

DC Injection Brakes

Specially customised heavy duty Star Delta solution

free advice BR016 and further details 192.80 CC1201-400V

28.00

28.00 Your Specialist inCC1201-230V DC Injection Braking

Brake Contactor 230V Coil Control Fuse Holder

FL014

5.50

Control Fuse - 4A

FL071

1.55

DC Injection Modular Kit

www.cromptoncontrols.co.uk

Tel:

45mm

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Shaft Power Monitors

Direct-on-Line Reversing • Prevents dry running, cavitation and jamming in pumps • WEATHERPROOF IP55 • Single Phase or Three Phase • Colour RAL7035 Light Grey • For rated motor currents up to 999A • Surface Mounting Type: 3DR • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request • Uses thesteel motor as a sensor through a matched current transformer • Sheet enclosure • Built in Forward/Stop Reset/Reverse push buttons • Automatic alarm levels • Provision for remote control • Hand resetsetting thermal of overloads • Modular DIN rail mounting for simple installation MaxProtection FLC Approx. Without Isolator With Isolator With Isolator & Fuses • IP20 class (415V 3ph) kW (hp) Type Price £ Type Price £ Type Price £ • Typical applications include Pumps, Mixers, Agitators, Blenders, Scrapers, Conveyors, Machine tools, Automatic Gates and Doors 12 5.5 (7.5) 3DR1 - - S 131.20 3DR1 - - I 196.90 3DR1 - - F 268.00 18

7.5

(10)

3DR2 - - S

134.70

3DR2 - - I

201.00

3DR2 - - F

272.00

(15)

3DR3 - - S

202.00

3DR3 - - I

264.00

3DR3 - - F

427.00

Model 32 Supply 15 Part (20) 3DR4 - - S 291.00 3DR4 -- I EL-FI Voltage Inputs Outputs No. Not available as 480/1/50 Available as Up/Stop/Down M10 1phStarters 100-240V Up to 50 Amps plus other 1 x text C/Ocombinations relay SS077 For Reversing above 15kW – P.O.A. on request 3ph 100-600V External Reset Alarm M20 1ph 100-240V Up to 999 Amps 2 x N/O relay SS070 3ph 100-240V Auto Set & Reset Alarm & Pre-alarm 1 x analogue M20 3ph 380-500V Up to 999 Amps 2 x N/O relay SS074 Auto Set & Reset Alarm & Pre-alarm 1 x analogue

Dimensions 328.00 H 90

W 45

(mm) 3DR4 - - F 490.00 x D Price £ 115 £301

115

£409

Conveyors

• The above prices include the relevant Current Transformer for up to 100A • Please specify the motor FLC or which CT is required as shown in the spares options below. • Above 100 prices Amps include FLC an additional CTCurrent is required – Price on • The above the relevant Transformer forapplication up to 100A

Roller Doors

• Please specify the motor FLC or which CT is required as shown in the spares options below. EL-FI Shaft Power Monitor Options Two speed dual wound • Above 100 Amps FLC an additional CT is required – Price on application • WEATHERPROOF IP55 • Three Phase • Colour RAL7035 Light Grey

Option Part No. Price £ • Surface Mounting Type: 3DW • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request EL-FI Shaft Power Monitor Options £74.60 FPK 1 Front panel mounting kit including terminal covers SS076 • Hand • Sheet steel enclosure with built in High/Stop Reset/Low push buttons reset thermal overloads • Provision for remote control Spare Current Transformers Option Part No. Price £ CTM10 – FLC 0.4 to 10.0A FLC £28.60 Max Approx. Without Isolator SS071 With Isolator FPK 1 - Front panel mounting kit including terminal covers SS076 69.00 £28.60 CTM25 – 10.1 SS073 Price (415V 3ph) to 25.0A kW FLC (hp) Type £ Type Price £ Spare Current Transformers CTM50 –12 26 to 50.0A5.5 FLC (7.5) £28.60 3DW1 – – – S SS072 175.00 3DW1 – – – I 223.00 CTM10 ––51.0 0.4 to FLC SS071 26.50 £57.90 CTM100 to 10.0A 100.0A FLC 18 7.5 (10) 3DW2 – – – S SS075 188.20 3DW2 – – – I 235.00 CTM25 – 10.1 to– 25.0A SS073 26.50 Terminal Covers 2 off FLC SS080 £4.90 CTM50 – 26 to 50.0A FLC SS072 26.50 For Two Speed Dual Wound Starters above FLC required for high & low speeds. CTM100 – 51.0 to 100.0A FLC SS075 53.60 7.5kW – P.O.A. Please note: Terminal Covers – 2 off SS080 4.60 For motors above 100A FLC an additional CT is required – Price on application

For up note: to 690V Supply voltages - price on application Fans Pumps Machine Tools Please For motors above 100A FLC an additional CT is required – Price on application New for Old! • WEATHERPROOF IP55 • Three Phase • Colour RAL7035 Light Grey For up tonote 690V voltages - price •on application Please theSupply above EL-FI Monitors replace previous models as follows • Surface Mounting Type: 3PCShaft Power Standard Coilnow Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request New for Old! • Sheet steel enclosure with built in High/Stop Reset/ Low push buttons • Hand reset thermal overloads • Provision for remote control M10 for basic functions replaces EL-FI models LM, PM, FM, V5, V6. Please note the above EL-FI Shaft Power Monitors now replace M20 for advanced monitoring & analogue output - replaces EL-FI models LM, DLM, G3, V3, V5, V6 Max FLC Approx. Without Isolator With Isolator M10 for basic functions - replaces EL-FI models LM, PM, FM, V5, V6. Please quote model voltage input, Part & Serial Numbers when (415V 3ph)the oldkW (hp) Type Priceenquiring. £ Type Price £ M20 for advanced monitoring & analogue output - replaces EL-FI models LM, DLM, G3, V3, V5, V6

Two speed pole change

5.5

7.5

(7.5)

3PC1 – – – S

301.00

3PC1 – – – I

3PC2 – – – S

312.00

3PC2 – – – I

385.00

341.00

3PC3 – – – I

439.00

Please quote the old model voltage input, Part & Serial Numbers when enquiring. (10)

11 (15) 3PC3 – – – S EL-FI Drainage Control Monitor

365.00

Prevents Dry Running in Submersible Pumps, cuts running cost & extends lifetime

Please Note: Overload setting range. High speed overload rated half full load current of motor.

For Two Speed Pole Change Starters above 11kW – P.O.A. Motor Connection details required.

• Surface Mounting Type: 3SP • Built in Start/Stop Reset push buttons

• Coil Voltages: (50/60Hz) • Hand reset thermal overloads

• Continuously adjusts the pump operation to suit the sump/pit filling rate, without sensors • Minimised running reduces wear & tear and overall energy rate Single Phase Seriesinclude Parallel • Typical applications Water treatment plants, Lifting pump stations, Booster stations • WEATHERPROOF IP55 drainage of construction • Single sites, Phase Quarries and Mines• Capacitor start/capacitor run or Induction run and General Model Supply Approx. EL-FI Voltage (240V 1ph) kW (hp) DCM 3ph 24 3.7 380-500V (5) Max FLC

5.5

(7.5)

Without Isolator

With Isolator

Inputs Outputs Type Price £ Type up to 999 Amps 2 x N/O relay 3Auto SP1 –Set/Reset –S 257.00 Alarm & 3SP1 ––I Pump 3High SP2 –Level –S 265.00 3SP2 – – I Motor Thermal

Please Note: Overload setting range. Overload rated half full load current of motor. For Single Phase Series Parallel Starters above 5.5kW – P.O.A.

• 100/110V, 220/230V, 480V • Provision for remote control

Part No. Price £ SS079

Dimensions (mm) With Isolator & Fuses H x W x D Price £ Type Price £ 115 £552 90 45

362.00

3SP1 – – F

405.00

376.00

3SP2 – – F

441.00

For motor frame sizes D160/180 & Electrodrives motors – P.O.A.

Grain Drying Fans

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Irrigation Pumps

Shaft Power Monitors

Standard Starters

Pro-active high specification measurement for machine & process protection

NEW TSA Soft Starters - Everything you need except variable speed!

Soft Starters

Standard Starters

Direct-on-Line Reversing • • • •

WEATHERPROOF IP55 Surface Mounting Type: 3DR Sheet steel enclosure Hand reset thermal overloads Max FLC

(415V 3ph)

• • • •

Approx.

Without Isolator

kW (hp) new brand

5.5

Single Phase or Three Phase • Colour RAL7035 Light Grey Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request Built in Forward/Stop Reset/Reverse push buttons Provision for remote control

Typeof level

3DR1 - - S

(7.5)

With Isolator

Price £ soft start

motor

With Isolator & Fuses

Type control

Price £

Type

Price £

3DR1 - - I

196.90

3DR1 - - F

268.00

201.00

3DR2 - - F

272.00

264.00

3DR3 - - F

427.00

328.00

3DR4 - - F

490.00

131.20

• Integrated contactor technology 7.5 (10) By-pass with 3DR2proven -- S 134.70 3DR2 - - I • Soft intelligent monitoring, smart stops 25 11 torque (15) starting, 3DR3 -- S 3DR3 - - I 202.00 • Simple, robust & compact 32 15 (20) 3DR4 - -construction S 291.00 3DR4 - - I • Coated Printed Circuit Boards for harsh environments Not available as 480/1/50 Available as Up/Stop/Down Slow speed, jog and reverse with no extra hardware • For Reversing Starters above 15kW – P.O.A. plus other text combinations on request 18

TSA Soft Starters - Three Phase 200-525V AC 50/60Hz - IP20 Modules Normal Duty kW @400V

Normal Duty* A

TSA Model TSA-016 TSA-022 TSA-030 TSA-036 TSA-042 TSA-056 TSA-070 TSA-085 TSA-100 IP55 • WEATHERPROOF

16 22 30 36 42 56 70 85 100 • Three Phase

Part No.

7.5 11 15 18.5 22 30 37 45 55

Two speed dual wound

Price £

SS084 SS085 SS086 SS087 SS088 SS089 SS090 SS091 SS092 • Colour RAL7035 Light Grey

£708 £728 £741 £755 £804 £852 £946 £1,016 £1,235

Conveyors

Roller Doors

• Surface Mounting Type: 3DW • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request *Note: Normal duty - Start Start Time=15sec to 56A & 30sec to 100Aoverloads @ 10 Starts/Hour • Sheet steel enclosure with built inAmps=3xInom, High/Stop Reset/Low push buttons • Hand reset thermal • Provision for remote control

All above Module Dimensions 246H x 126W x 188D

Max FLC

Approx.

(415V 3ph)

Without Isolator

(hp)

TSA Options 12 Soft Starter 5.5 (7.5) 18

7.5

Option

(10)

With Isolator

Type

Price £

Type

3DW1 – – – S

175.00

3DW1 – – – I

223.00

3DW2 – – – S

188.20

3DW2 – – – I

235.00

Part No.

Price £

£193.50 SS093 £138.90 SS094 £96.70 PTC & PT100 input board SS095 £106.00 Pumps Machine Tools RS485 serial communications board - Modbus-RTU protocol SS096 Fans £173.90 Profibus DP V1 fieldbus option SS097 • WEATHERPROOF IP55 • Three Phase • Colour RAL7035 Light Grey £173.90 SS098 Devicenet fieldbus option • Surface Mounting Type: 3PC • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request £173.90 Ethernet Profinet IO (RT)Reset/ 1 • SheetIndustrial steel enclosure with built in High/Stop Low push buttons • HandSS099 reset thermal overloads • Provision for remote control SS100 £185.20 Industrial Ethernet Profinet IO (RT) 2 port Max Industrial FLC Approx. with Modbus/TCP protocol Without Isolator With Isolator Ethernet SS101 £185.20

IP54Dual External Controlabove Panel for cabinet door mounting For Two Speed Wound Starters FLC required for high & low speeds. 7.5kW – I/O P.O.A. Board with 3 extra relay outputs & 3 extra digital inputs

Two speed pole change

(415V 3ph)

Type

(hp)

5.5

(7.5)

Price £

Type

Price £

3PC1 – – – S

301.00

3PC1 – – – I

365.00

3PC3 – – – S

341.00

3PC3 – – – I

439.00

18 7.5 Inverters (10) 3PC2 – – – S 312.00 –––I FDU & VFX - Everything you need including variable3PC2 speed! 25

(15)

385.00

For Two Speed Pole Change Starters above 11kW – P.O.A. Motor Connection details required.

Please Note: Overload setting range. High speed overload rated half full load current of motor.

Also available on request, high performance FDU & VFX frequency

Single Phase Seriesinverters Parallel with special application features built into robust panel or direct • WEATHERPROOF IP55 wall • Surface Mounting Type: 3SP • Built in Start/Stop Reset push buttons Max FLC (240V 1ph)

Approx. kW

• Single Phase mounting enclosures as standard. • Coil Voltages: (50/60Hz) • Hand reset thermal overloads

Please contact Without Isolator

• Capacitor start/capacitor run or Induction run • 100/110V, 220/230V, 480V • Provision for remote control

us to discuss your requirements and price on application With Isolator With Isolator & Fuses

(hp)

Type

Price £

Type

Price £

Type

Price £

3.7

(5)

3SP1 – – S

257.00

3SP1 – – I

362.00

3SP1 – – F

405.00

5.5

(7.5)

3SP2 – – S

265.00

3SP2 – – I

376.00

3SP2 – – F

441.00

Please Note: Overload setting range. Overload rated half full load current of motor. For Single Phase Series Parallel Starters above 5.5kW – P.O.A.

For motor frame sizes D160/180 & Electrodrives

motors – P.O.A. Your Specialist in Variable Speed Drives

Grain Drying Fans

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras TM

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

Irrigation Pumps

sales@cromptoncontrols.co.uk

MSF Soft Starters with Braking & Shaft Power Monitor Features

• Hand reset thermal overloads

• Provision for remote control

Max FLC200-525V Approx. Without Isolator Standard AC Supply/Motor Voltage Option Voltage (415V 690 3ph) AC Supply/Motor kW (hp) Typeon request Price £ 100-240v or 380-500 AC Control Voltage options 12

5.5

3DR1 - - S

(7.5)

With Isolator

131.20

Price £

Type

Price £

3DR1 - - I

196.90

3DR1 - - F

268.00

201.00

3DR2 - - F

272.00

264.00

3DR3 - - F

18 7.5 (NEMA (10) - - S / IP00 134.70 3DR2 -- I IP20 protection class, 1) up to3DR2 MSF835 (NEMA 0) MSF1000 & 1400

427.00 Dimensions 100-240V 380-500V 3DR4 - - S 291.00 328.00 3DR4 - - F 490.00 (mm) Control Control 3DR4 - - I MSF A kW* H x W x D Part No. Part No. Price £ Not available as 480/1/50 Available as Up/Stop/Down SS051A MSF 17 17 7.5 320 126 260 SS051 For Reversing Starters above 15kW – P.O.A. plus other text combinations on request £771 £879 MSF 30 30 15 320 126 260 SS052 SS052A £993 MSF 45 45 22 320 126 260 SS053 SS053A SS054A £1,102 MSF 60 60 30 320 126 260 SS054 SS055A £1,184 MSF 75 75 37 320 126 260 SS055 SS056A £1,439 MSF 85 85 45 320 126 260 SS056 Conveyors SS057A £1,748 SS057 MSF 110 110 55 400 176 260 SS058A £1,977 MSF 145 145 75 400 176 260 SS058 SS059A £2,314 MSF 170 170 90 500 260 260 SS059 SS060A £2,487 MSF 210 210 110 500 260 260 SS060 SS061A £2,771 MSF 250 250 132 500 260 260 SS061 SS062A £3,617 SS062 MSF 310 310 160 532 547 278 Roller Doors SS063A £4,411 MSF 370 370 200 532 547 278 SS063 SS064A £4,693 SS064 MSF 450 450 250 532 547 278 SS065A £5,096 MSF 570 570 315 687 640 302 SS065 SS066A £7,802 SS066 MSF 710 710 400 687 640 302 SS067A £7,451 MSF 835 835 450 687 640 302 SS067 • WEATHERPROOF • Three Phase SS068 RAL7035 Light Grey £11,171 MSF 1000 1000IP55 560 900 875 345 SS068A • Colour • Surface Mounting Type: 3DW • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request MSF 1400 1400 800 900 875 345 SS069 SS069A • £15,717 • Sheet steel enclosure with built in High/Stop Reset/Low push buttons Hand reset thermal overloads • Provision for remote control 25

Model 32

(15)

(20)

3DR3 - - S

With Isolator & Fuses

Type

3DR3 - - I

202.00

Two speed dual wound

*Approximate kW @ 400V 3ph a.c. supply/motor voltage Max FLC

Approx.

(415V 3ph) 12

Up to 800kW

Without Isolator

With Isolator

(hp)

Type

Price £

Type

5.5

(7.5)

3DW1 – – – S

175.00

3DW1 – – – I

3DW2 – – – S

188.20

18 7.5 Options (10) MSF Soft Starter

• WEATHERPROOF IP55 • Three Phase • Surface Mounting Type: 3PC • Standard Coil Voltages: 50/60Hz • Sheet steel enclosure with built in High/Stop Reset/ Low push buttons

Please note: Max FLCcontrol Approx. Without Isolator • Complete panels available on request. (415V 3ph) kW (hp) Type • For up to 690V supply/motor voltage price on application 12

5.5

7.5

223.00

3DW2 – – – I Diagnostics Capability

For Two Speed Dual Wound Starters above FLC required for high & low speeds. Option Part No. Price £ 7.5kW – P.O.A. £29 Cable kit for external mounting CT’s in bypass XG825 XG826 Factory fitted remote keypad mounting kit £216 XG994 Retrofit remote keypad mounting kit £271 £52 Cable entry box (MSF 017 - 085 only) XH002

Two speed pole change

Price £

• 3ph Current • 3ph Voltage • Power kW Fans Pumps • Energy consumtion kWh • Elapsed time • Colour RAL7035 Light Grey

235.00

Machine Tools

• 24V, 48V, 110V, 230V, 400V, 440V others on request • Hand reset thermal overloads • Provision for remote control

Standards

With Isolator

Price £

EMC Emissions:EN50081-2 with by pass Type Price £ EMC Immunity: EN50082-2

3PC1 – – – S

301.00

(10)

3PC2 – – – S

312.00

3PC2 – – – I

385.00

(15)

3PC3 – – – S

341.00

3PC3 – – – I

439.00

(7.5)

3PC1 – – – I

365.00

General Electrical Data Communication Software Options Please Note: Overload setting range. High speed For Two Speed Pole Change Starters above 11kW – P.O.A. overload rated half full load current of motor.

Option RS238 / RS485 PROFIBUS DP • WEATHERPROOF IP55 DEVICENET

Motor Connection details required. Tolerances: Voltage

Price £ £121 £501 £434 • Single Phase

Control Voltage ±10% Motor Voltage 200 - 525 ±10%

Recommended fuse for 10 Amp max Control Card: • Capacitor50/60Hz start/capacitor run or Induction run ± 10% Frequency: • Surface Mounting Type: 3SP • Coil Voltages: (50/60Hz) x 8 Amp, 480V 250 AC Relay Outputs: • 100/110V,3 220/230V, • Built in Start/Stop Reset push buttons • Hand reset thermal overloads • Provision for remote control 0 to 40°C + 10°C derate by 20% Operating Temp: reduction Max FLC Approx. Without Isolator With Isolator Withpower Isolator & Fuses IP20 <90kW Protection Price Degree: (240V 1ph) kW (hp) Type Price £ Type £ Type Price £ IP20 >90kW 24 3.7 (5) 3SP1 – – S 257.00 3SP1 ––I 362.00 3SP1 – – F control 405.00700% boost for 2 Torque Overload: Grain seconds, 250% during Ramp Irrigation 32 5.5 (7.5) 3SP2 – – S 265.00 3SP2 – – I 376.00 3SP2 ––F 441.00 Drying Pumps Voltage control 250% during Ramp

Single Phase Series Parallel

Please Note: Overload setting range. Overload rated half full load current of motor. For Single Phase Series Parallel Starters above 5.5kW – P.O.A.

For motor frame sizes D160/180 & Electrodrives motors – P.O.A.

Fans

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Soft Starters

Standard Starters

• Simplified Setting, New Functionality and More Flexible I/O • Reduces water hammer • Menu format coordinated with the new Emotron FDU and VFX drives Direct-on-Line Reversing • Protects pumps from damage • New Front Panel - Emotron family look and improved keypad design • WEATHERPROOF IP55features built in • Single Phase or Three Phaseapplications• Colour•RAL7035 Greycontrol feature SpecialLight pump Specification as standard for more • High • Surface Mounting Type: 3DR • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request and reduced cost • Sheet steel enclosure • Built in Forward/Stop Reset/Reverse push buttons

Inverter Drives

Yaskawa J1000 inverters: Low Cost Variable Speed Drives

Low Cost Variable Speed Drives

Cost Effective Speed Control for Standard AC Induction Motor Applications Speed Control for Standard AC Induction Motor Applications - Including Pumps, Fans and Conveyors including Pumps, Fans and Conveyors J1000 SinglePhase Phase200-240V 200–240VAC AC50/60Hz 50/60Hz- – IP20Module Module++RFI RFIFilter Filter J1000Inverter Inverter - –Single IP20 Inverter Module Inverter Module

Normal Duty Normal Duty Amp kW kW Amp

Heavy Duty Heavy Duty Amp kW kW Amp

PartPart No.No. Price £ £ Price

RFIRFI Filter Filter

PartPart No.No. Price £ £ Price

CIMR-JCBA0001BAA CIMR-JCBA0001BAA CIMR-JCBA0002BAA CIMR-JCBA0002BAA CIMR-JCBA0003BAA CIMR-JCBA0003BAA CIMR-JCBA0006BAA CIMR-JCBA0006BAA CIMR-JCBA0010BAA CIMR-JCBA0010BAA

1.2 1.2 1.9 1.9 3.5 3.5 6.0 6.0 9.6 9.6

0.8 0.8 1.6 1.6 3.0 3.0 5.0 5.0 8.0 8.0

YNE014 YNE014 YNE015 YNE015 YNE016 YNE016 YNE017 YNE017 YNE018 YNE018

FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-20-07 FS23638-20-07 FS23638-20-07 FS23638-20-07

YNE019 YNE019 YNE019 YNE019 YNE019 YNE019 YNE022 YNE022 YNE022 YNE022

0.2 0.2 0.4 0.4 0.750.75 1.1 1.1 2.2 2.2

0.1 0.1 0.2 0.2 0.4 0.4 0.750.75 1.5 1.5

153.20 £157.60 160.40 £165.10 169.70 £174.60 202.00 £208.00 268.00 £276.00

Note: Normal Duty = 120% Overload for 60 seconds Heavy Duty = 150% Overload for 60 seconds

21.70 £22.30 21.70 £22.30 21.70 £22.30 30.00 £30.90 30.00 £30.90

J1000 Inverter

J1000 Inverters The footprint mounting RFI Filter is required

@ 0.1 - 5.5kW Power Ratings @ 200VAC & 400VAC @ 5 Digital Input Note: @ Normal 1 Analogue Input Duty = 120% Overload for 60 seconds 1 Analogue Heavy Duty =Output 150% Overload for 60 seconds 1 Relay output @ V/f control

for full EMC compliance. @ 0.1 - 5.5kW Power Ratings @ 200VAC & 400VAC @ 5 Digital Input @ 1 Analogue Input

The footprint mounting RFI Filter is required for full EMC compliance.

1 Analogue Output 1 Relay output @ V/f control

J1000 Inverter – Three Phase 380-480V AC 50/60Hz – IP20 Module + RFI Filter J1000 Inverter -Normal Three Phase 380-480V AC 50/60Hz - IP20 Module + RFI Filter Duty Heavy Duty

Inverter Module AmpNormal kWDuty CIMR-JC4A0001BAA 1.2Amp 0.4 kW Inverter Module CIMR-JC4A0002BAA 2.1 0.75 CIMR-JC4A0001BAA 1.2 0.4 CIMR-JC4A0004BAA 4.1 1.5 CIMR-JC4A0002BAA 2.1 0.75 CIMR-JC4A0005BAA 5.4 2.2 CIMR-JC4A0004BAA 4.1 1.5 CIMR-JC4A0007BAA 6.9 3 CIMR-JC4A0005BAA 5.4 2.2 CIMR-JC4A0009BAA 8.8 3.7 CIMR-JC4A0007BAA 6.9 3 CIMR-JC4A0011BAA 11.1 5.5 CIMR-JC4A0009BAA 8.8 3.7 CIMR-JC4A0011BAA 11.1 5.5 Note: Normal Duty = 120% Overload for 60 seconds

Amp HeavykW Duty 1.2 Amp 0.2 kW 1.8 0.4 1.2 0.2 3.4 0.75 1.8 0.4 4.8 1.5 3.4 0.75 5.5 2.2 4.8 1.5 7.2 3.0 5.5 2.2 9.2 4.0 7.2 3.0 9.2 4.0

Part No.

Price £

YNE000 Part No. 240.00 Price £ YNE001 265.00 YNE000 £259 YNE002 300.00 YNE001 £286 YNE003 336.00 £324 YNE002 YNE004 403.00 YNE003 £363 YNE005 441.00 £435 YNE004 YNE006 490.00 YNE005 £476 YNE006 £530

RFI Filter

Part No.

FS23639-5-07 RFI Filter FS23639-5-07 FS23639-5-07 FS23639-5-07 FS23639-5-07 FS23639-10-07 FS23639-5-07 FS23639-10-07 FS23639-10-07 FS23639-10-07 FS23639-10-07 FS23639-15-07 FS23639-10-07 FS23639-15-07

YNE007 Part No. YNE007 YNE007 YNE007 YNE007 YNE010 YNE007 YNE010 YNE010 YNE010 YNE010 YNE013 YNE010 YNE013

Price £ 37.30 Price £ 37.30 £40.30 37.30 £40.30 47.60 £40.30 47.60 £51.50 47.60 £51.50 56.90 £51.50 £61.40

Heavy Duty = 150% Overload for 60 seconds

Features

The footprint mounting RFI Filter is required for full EMC compliance.

• Heavy Duty rating for Constant Torque Applications - for example Conveyors & Screw Feeders Features

• Normal rating for Variable Torque Applications - for example Centrifugal Fans Feeders & Pumps • Heavy DutyDuty rating for Constant Torque Applications - for example Conveyors & Screw • Normal Duty rating for Variable Torque Applications - for example Centrifugal Fans & Pumps • Compact design and side by side mounting reduces installation and space costs • Simpledesign Digitaland Operator / Displayreduces with 8 keys & 5 digit LED display • Compact side byKeypad side mounting installation and space costs • EasyDigital Set-UpOperator Functions for quick installation operation • Simple Keypad / Display with 8&keys & 5 digit LED display • Optional LED / Display & operation • Easy Set-UpRemote Functions forKeypad quick installation • Serial Remote Communication Option compatible with RS-422/485 Interface for MEMOBUS communication • Optional LED Keypad / Display • Serial Communication Option compatible with RS-422/485 Interface for MEMOBUS communication Options Options

PartPart No. No.

Price Price £ £

JVOP-182 Operator Panel YNE027 JVOP-182 LEDLED Operator Panel * * YNE027 EUOP-V11001 Keypad Keypad IP65 Door Mounting Frame YNE020 EUOP-V11001 IP65 Door Mounting Frame ****** YNE020 RJ45 Plug Lead Keypad Keypad Cable meter YNE021 RJ45 Plug Lead Cable 1.5 1.5 meter YNE021 SI-485/J Comm. Interf. RS 485 YNE023 SI-485/J Ser.Ser. Comm. Interf. RS 485 YNE023 SI-232/J Comm. Interf. RS 232-C YNE024 SI-232/J Ser.Ser. Comm. Interf. RS 232-C YNE024 SI-232/JC RS232-C (removable) YNE025 SI-232/JC ditodito RS232-C (removable) YNE025 AI-V3/J Potentiometer YNE026 AI-V3/J Potentiometer YNE026 JVOP-181 Copy w\USB converter YNE028 JVOP-181 Copy UnitUnit w\USB converter ** ** YNE028 EZZ08122A Attachment YNE029 EZZ08122A DINDIN RailRail Attachment 1 1 YNE029 EZZ08122B Attachment YNE030 EZZ08122B DINDIN RailRail Attachment 2 2 YNE030 EZZ08122C Attachment YNE154 EZZ08122C DINDIN RailRail Attachment 3 3 YNE154

Description Description

£62.70 58.00 £44.20 19.70 £10.10 9.30 £54.70 50.70 £57.00 52.80 £64.80 60.00 £42.50 39.30 £207.00 191.50 £13.40 12.40 £15.60 14.50 £17.90 16.60

* Requires SI-232/J (YNE024) ** Requires SI-232/JC (YNE025) *** Requires Keypad Cable (YNE021)

Your Specialist in Variable Speed Drives TM

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

Fans FansPumps

Pumps Conveyors

Conveyors

* Requires SI-232/J (YNE024) ** Requires SI-232/JC (YNE025) *** Requires Keypad Cable (YNE021)

Your Specialist in Variable Speed Drives

Tel: +44 (0)1924 368251 sales@cromptoncontrols.co.uk www.cromptoncontrols.co.uk sales@cromptoncontrols.co.uk

Nex 14t Generation Variable Speed Drives

Including all types of Pumps, Fans, Conveyors, Compressors, Mixers and more

The “One For All” Inverter for Multiple Applications including all types of Pumps, Fans, Conveyors, Compressors, Mixers and more.... V1000 Inverter - Single PhasePhase 200-240V AC 50/60Hz - IP20–Module + RFI + Filter – Single 200–240V AC 50/60Hz IP20 Module RFI Filter V1000 Inverter Normal Duty Heavy Duty Duty Duty Inverter Module Amp NormalkW Amp HeavykW Inverter Module Amp kW Amp kW CIMR-VCBA0001BAA 1.2 0.2 0.8 0.1 CIMR-VCBA0001BAA 1.2 0.2 0.8 0.1 CIMR-VCBA0002BAA 1.9 0.4 1.6 0.2 CIMR-VCBA0002BAA 3.3 1.9 CIMR-VCBA0003BAA 0.750.4 3.0 1.6 0.4 0.2 CIMR-VCBA0003BAA 6.0 3.3 CIMR-VCBA0006BAA 1.1 0.75 5.0 3.0 0.750.4 CIMR-VCBA0006BAA 9.6 6.0 CIMR-VCBA0010BAA 2.2 1.1 8.0 5.0 1.5 0.75 CIMR-VCBA0010BAA 12.0 9.6 CIMR-VCBA0012BAA 3.0 2.2 11.0 8.0 2.2 1.5 CIMR-VCBA0012BAA - 12.0 CIMR-VCBA0018BAA - 3.0 17.511.0 4.0 2.2 CIMR-VCBA0018BAA 17.5 4.0

Price £ Part No. Part No. Price £ YNE053 £208 YNE053 202.00 YNE054 £214 YNE054 £224 208.00 YNE055 YNE055 £263 218.00 YNE056 YNE056 £312 256.00 YNE057 YNE057 £364 303.00 YNE058 YNE058 £414 354.00 YNE059 YNE059 402.00

RFI Filter RFI Filter FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-10-07 FS23638-20-07 FS23638-20-07 FS23638-20-07 FS23638-20-07 FS23638-30-07 FS23638-30-07 FS23638-40-07 FS23638-40-07

Note:

Normal Duty =Inverters 120% Overload for 60 seconds V1000 Heavy Duty = 150% Overload for 60 seconds

Price £ Part No. Part No. Price £ YNE019 £22.30 YNE019 21.70 YNE019 £22.30 YNE019 £22.30 21.70 YNE019 YNE019 £30.90 21.70 YNE022 YNE022 £30.90 30.00 YNE022 YNE022 £40.40 30.00 YNE065 YNE065 £55.40 39.30 YNE066 YNE066 53.80

V1000 Inverter

@ - 15kWmounting Power Ratings The0.1 footprint RFI Filter is required @ 400VAC for 200VAC full EMC &compliance. @ 6 Digital Input 1 Pulse Intput 2 Analogue Input @ 1 Pulse Output 1 Analogue Output 1 Relay Output @ Safety EN 954-1 cat 3

@ 0.1 - 15kW Power Ratings @ Note: 200VAC & 400VAC @ Duty 6 Digital InputOverload for 60 seconds Normal = 120% 1 Pulse Intput Heavy Duty = 150% Overload for 60 seconds 2 Analogue Input 1 Pulse Output The @ footprint mounting RFI Filter is Analogue Output required1 for full EMC compliance. 1 Relay Output @ Safety EN 954-1 cat 3

V1000 Inverter - Three Phase 380-480V AC 50/60Hz - IP20 Module + RFI Filter

V1000 Inverter – Three Phase 380-480V AC 50/60Hz – IP20 Module + RFI Filter

Inverter Module Inverter Module CIMR-VC4A0001BAA CIMR-VC4A0001BAA CIMR-VC4A0002BAA CIMR-VC4A0002BAA CIMR-VC4A0004BAA CIMR-VC4A0004BAA CIMR-VC4A0005BAA CIMR-VC4A0005BAA CIMR-VC4A0007BAA CIMR-VC4A0007BAA CIMR-VC4A0009BAA CIMR-VC4A0009BAA CIMR-VC4A0011BAA CIMR-VC4A0011BAA CIMR-VC4A0018FAA CIMR-VC4A0018FAA CIMR-VC4A0023FAA CIMR-VC4A0023FAA CIMR-VC4A0031FAA CIMR-VC4A0031FAA CIMR-VC4A0038FAA CIMR-VC4A0038FAA

Normal Duty Duty AmpNormal kW Amp kW 1.2 0.4 2.1 1.2 0.750.4 4.1 2.1 1.5 0.75 5.4 4.1 2.2 1.5 6.9 5.4 3 2.2 8.8 6.9 3.7 3 11.1 8.8 5.5 3.7 17.511.1 7.5 5.5 23.017.5 11.0 7.5 31.023.0 15.011.0 38.031.0 18.515.0 38.0 18.5

Heavy Duty Duty Amp Heavy kW Amp kW 1.2 0.2 1.8 1.2 0.4 0.2 3.4 1.8 0.750.4 4.8 3.4 1.5 0.75 5.5 4.8 2.2 1.5 7.2 5.5 3.0 2.2 9.2 7.2 4.0 3.0 14.8 9.2 5.5 4.0 18.014.8 7.5 5.5 24.018.0 11.0 7.5 31.024.0 15.011.0 31.0 15.0

Note: Features Normal Duty = 120% Overload for 60 seconds

Part No. Price £ Part No. Price £ YNE031 £300 YNE031 £321 278.00 YNE032 YNE032 £372 297.00 YNE033 YNE033 £398 345.00 YNE034 YNE034 £447 369.00 YNE035 YNE035 £519 413.00 YNE036 YNE036 £567 480.00 YNE037 YNE037 £662 525.00 YNE038 YNE038 £766 612.00 YNE039 YNE039 £950 709.00 YNE040 YNE040£1,236 879.00 YNE041 YNE041 1,144.00

RFI Filter RFI Filter FS23639-5-07 FS23639-5-07 FS23639-5-07 FS23639-5-07 FS23639-5-07 FS23639-5-07 FS23639-10-07 FS23639-10-07 FS23639-10-07 FS23639-10-07 FS23639-10-07 FS23639-10-07 FS23639-15-07 FS23639-15-07 FS23639-30-07 FS23639-30-07 FS23639-30-07 FS23639-30-07 FS23639-50-07 FS23639-50-07 FS23639-50-07 FS23639-50-07

Part No. Price £ Part No. Price £ £40.30 YNE007 YNE007 £40.30 37.30 YNE007 YNE007 £40.30 37.30 YNE007 YNE007 £51.50 37.30 YNE010 YNE010 £51.50 47.60 YNE010 YNE010 £51.50 47.60 YNE010 YNE010 £61.40 47.60 YNE013 YNE013 £69.40 56.90 YNE049 YNE049 £69.40 64.20 YNE049 YNE049 64.20 YNE051 £127.50 YNE051 118.00 YNE051 £127.50 YNE051 118.00

Heavy Duty = 150% Overload for 60 seconds

• Heavy Duty rating for Constant Torque Applications - for example Conveyors & Screw Feeders The footprint mounting RFI Filter is required for full EMC compliance. • Normal Duty rating for Variable Torque Applications - for example Centrifugal Fans & Pumps All Features the features of the J1000 plus more including: • Heavy Duty rating for Constant Torque Applications - for example • Selectable Control Method: Open-Loop Current Vector or simple V/f Conveyors & Screw Feeders Machine Tools Compressors Machine Tools Compressors • NormalAC Duty rating for Variable Torque Applications - forMagnet example Centrifugal • Standard Induction Motor or Energy Saving Permanent Motor Control Fans & Pumps • Application parameter pre-settings shorten set-up time All theMode, features the J1000 plus more including, • Energy Saving PID of control, Sleep Function, Auto-tuning, • Selectable Control Method: Open-Loop Current or simple V/f • Dual Safety Input: safety category 3 (EN954-1), stopVector category) and IEC-61508 SIL2 • Standard AC Induction Motor or Energy Saving Permanent Magnet Motor Control Fans Pumps Conveyors • Application parameter pre-settings shorten set-up time Options Description Part No. Price £ • Energy Saving Mode, PID control, Sleep Function, Auto-tuning, Fans Pumps Conveyors Separate Operator Panel JVOP-180 YNE087 £107.40SIL2 • Dual Safety Input: safety LCD category 3 (EN954-1), stop category) and IEC-61508

JVOP-182 Separate LED Operator Panel YNE027 EUOP-V11001 Keypad IP65 Door Mounting Frame *** YNE020 Options Description Part No. RJ45 Plug Lead Keypad Cable 1.5 meter YNE021 JVOP-180 Seperate LCD Operator Panel YNE087 PS-V10S ext.24V power supply upto 4kW YNE080 JVOP-182 Separate LED Operator Panel YNE027 PS-V10M ext.24V power supply 5,5-15kW YNE081 EUOP-V11001 Keypad IP65 Door Mounting Frame *** YNE020 SI-C3/V Comm.Interface CC Link YNE082 RJ45 Plug Lead Keypad Cable 1.5 meter YNE021 SI-N3/V Comm.Interface DeviceNet YNE083 PS-V10S ext.24V power supply upto 4kW YNE080 SI-P3/V Comm.Interface Profibus DP YNE084 PS-V10M ext.24V power supply 5,5-15kW YNE081 SI-S3/V Comm.Interface CANopen YNE085 SI-C3/V Comm.Interface CC Link YNE082 SI-T3/V Comm.Interface Mechatrolink II YNE086 SI-N3/V Comm.Interface DeviceNet YNE083 JVOP-181 Copy Unit RS232/USB YNE028 SI-P3/V Comm.Interface Profibus DP YNE084 EZZ08122A DIN Rail Attachment 1 YNE029 SI-S3/V Comm.Interface CANopen YNE085 EZZ08122B DIN Rail Attachment 2 YNE030 SI-T3/V Comm.Interface Mechatrolink II YNE086 EZZ08122C DIN Rail Attachment 3 YNE154 JVOP-181 Copy Unit RS232/USB YNE028 EZZ08122D DIN Rail Attachment 4 YNE155 EZZ08122A DIN Rail Attachment 1 YNE029 *** Requires Keypad Cable (YNE021) EZZ08122B DIN Rail Attachment 2 YNE030 EZZ08122C DIN Rail Attachment 3 YNE154 EZZ08122D DIN Rail Attachment 4 YNE155 *** Requires Keypad Cable (YNE021)

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

£62.70 £44.20 Price £ £10.10 99.40 £134.20 58.00 £145.40 19.70 £234.00 9.30 £161.00 124.20 £246.00 134.60 £176.70 216.00 £446.00 149.00 £207.00 228.00 £13.40 163.50 £15.60 412.00 £17.90 191.50 £20.10 12.40 14.50 16.60 18.60

IP66 Three Phase V1000 Inverter Modules c/w RFI Filter also Available - See page 18

IP66 Single and Three Phase V1000 Inverter Modules c/w RFI Filter also Available on request sales@cromptoncontrols.co.uk TM

Inverter Drives

NEW Generation Variable Speed Drives The One For All Inverter for Multiple Applications

Inverter Drives

Next Generation Variable Speed Drives

Low CostThe Variable Speed Drives High Performance Inverter

offering the widest range of control possibilities from simple to Advanced Vector Control Applications

Cost Effective Speed Control for Standard AC Induction Motor Applications including Pumps, Fans and Conveyors A1000 Inverters J1000 Inverter – Single Phase 200–240V AC 50/60Hz – IP20 Module + RFI Filter @ 0.4 - 630kW Power Ratings Normal Duty Inverter Amp kW @ Module 200VAC & 400VAC

Heavy Duty Amp kW

Part No.

Price £

CIMR-JCBA0001BAA 1.2 @ 8 Digital Input CIMR-JCBA0002BAA 1.9 CIMR-JCBA0003BAA 1 Pulse Intput 3.5 CIMR-JCBA0006BAA 6.0 3 Analogue Input9.6 CIMR-JCBA0010BAA

0.8 1.6 3.0 5.0 8.0

YNE014 YNE015 YNE016 YNE017 YNE018

153.20 160.40 169.70 202.00 268.00

0.2 0.4 0.75 1.1 2.2

0.1 0.2 0.4 0.75 1.5

Note: Normal Duty = 120% Overload for 60 seconds Heavy Duty = 150% Overload for 60 seconds

@ 1 Pulse Output 2 Analogue Output RFI Filter Part No. Price £ 3 Relay Output FS23638-10-07 YNE019 21.70 @ Advanced Open Loop Vector FS23638-10-07 YNE019 21.70 Closed Loop Vector FS23638-10-07 YNE019 21.70 FS23638-20-07 @ PM-, SPM-, & IPMYNE022 Motor Control30.00 FS23638-20-07 YNE022 30.00 @ Safety EN 954-1 cat 3, EN 61508 SIL2

J1000 Inverter

A1000 Inverter - Three Phase 380-480V AC 50/60Hz - Module + RFI Filter

The footprint mounting RFI Filter is required Normal Duty for full EMC compliance. Inverter Module Amp kW

@ 0.1 - 5.5kW Power Ratings IP20 Kit* Part No.@ 200VAC Price £& 400VAC RFI Filter Part No. Price £ @ 5 Digital Input £476 FB-40008A YNE110 £58.10 CIMR-AC4A0002FAA 2.1 0.75 1.8 0.55 YNE089 IP20 Standard @ 1 Analogue FB-40008A Input £494 YNE110 £58.10 CIMR-AC4A0004FAA 4.1 1.5 3.4 0.75 YNE090 IP20 Standard Output CIMR-AC4A0005FAA 5.4 2.2 4.8 1.5 YNE091 £511 IP20 Standard1 Analogue FB-40008A YNE110 £58.10 £566 FB-40008A YNE110 £58.10 CIMR-AC4A0007FAA 6.9 3 5.5 2.2 YNE092 IP20 Standard1 Relay output CIMR-AC4A0009FAA 8.8 4 7.2 3.0 YNE093 IP20 Standard £604 @ V/f control FB-40014A YNE114 £73.80 £655 FB-40014A YNE114 £73.80 CIMR-AC4A0011FAA 11.1 5.5 9.2 4.0 YNE094 IP20 Standard £777 FB-40025A YNE116 £93.80 CIMR-AC4A0018FAA 17.5 7.5 14.8 5.5 YNE095 IP20 Standard CIMR-AC4A0023FAA 23.0 11.0 18.0 7.5 YNE096 £912 IP20 Standard FB-40025A YNE116 £93.80 CIMR-AC4A0031FAA 31.0 15.0 24.0 11.0 YNE097 IP20 Standard £1,057 FB-40044A YNE118 £127.50 CIMR-AC4A0038FAA 38.0 18.5 31.0 15.0 YNE098 £1,377 IP20 Standard FB-40044A YNE118 £127.50 CIMR-AC4A0044FAA 44.0 22.0 39.0 18.5 YNE099 £1,661 IP20 Standard FB-40060A YNE120 £156.70 £1,993 YNE121 CIMR-AC4A0058AAA 58.0 30.0 45.0 22.0 YNE100 £232 FB-40060A YNE120 £156.70 CIMR-AC4A0072AAA 72.0 37.0 60.0 30.0 YNE101 £2,376 YNE123 £244 FB-40072A YNE119 £241.00 75.0 37.0 CIMR-AC4A0088AAA 88.0 45.0 YNE102 £2,948 YNE124 £261 FB-40105A YNE122 £282.00 CIMR-AC4A0103AAA 103.0 55.0 91.0 45.0 YNE103 £3,068 YNE124 £261 FB-40105A YNE122 £282.00 £3,645 YNE126 CIMR-AC4A0139AAA 139.0 75.0 112.0 55.0 YNE104 £284 FB-40170A YNE125 £568.00 Normal Duty 150.0 Heavy CIMR-AC4A0165AAA 165.0 90.0 75.0 Duty YNE105 £4,848 YNE126 £284 FB-40170A YNE125 £568.00 Inverter Module Amp 110.0kW 180.0 Amp90.0 kW No. Price £ RFI£451 Filter FB-40250A Part No. £ CIMR-AC4A0208AAA 208.0 YNE106Part £5,332 YNE128 YNE127Price £592.00 CIMR-AC4A0250AAA 250.0 110.0 YNE107YNE000 £6,323 240.00 YNE130 £553 CIMR-JC4A0001BAA 1.2 132.00.4 216.0 1.2 0.2 FS23639-5-07 YNE007 FB- 40250A YNE12737.30 £592.00 CIMR-AC4A0296AAA 296.0 132.0 YNE108YNE001 £7,238 265.00 YNE130 £553 CIMR-JC4A0002BAA 2.1 160.00.75 260.0 1.8 0.4 FS23639-5-07 YNE007 YNE12937.30 £837.00 FB- 40350A £8,774 300.00 YNE130 CIMR-AC4A0362AAA 362.0 160.0 YNE109YNE002 £553 CIMR-JC4A0004BAA 4.1 185.01.5 304.0 3.4 0.75 FS23639-5-07 YNE007 FB- 40350A YNE12937.30 £837.00 CIMR-JC4A0005BAA 5.4 2.2 4.8 1.5 YNE003 336.00 FS23639-10-07 YNE010 47.60 * IP20 Standard Protection up to CIMR-AC4A0044FAA, IP00 Standard from CIMR-AC4A0058AAA or IP20 with Option Kit above CIMR-JC4A0007BAA 6.9 3 5.5 2.2 YNE004 403.00 FS23639-10-07 YNE010 47.60 Note: Normal Duty = 120% seconds 3.0Heavy Duty = 150%441.00 Overload for 60FS23639-10-07 seconds CIMR-JC4A0009BAA 8.8 Overload 3.7 for 607.2 YNE005 YNE010 47.60 The footprint is required 490.00 for full EMC compliance. CIMR-JC4A0011BAA 11.1 5.5 9.2 mounting 4.0RFI Filter YNE006 FS23639-15-07 YNE013 56.90 Heavy Duty Amp kW

Part No.

Price £

J1000 Inverter – Three Phase 380-480V AC 50/60Hz – IP20 Module + RFI Filter

Note: NormalFeatures Duty = 120% Overload for 60 seconds

Heavy Duty = 150% Overload for 60 seconds

• Heavy Duty rating for Constant Torque Applications The footprint mounting RFI Filter is required for full Applications EMC compliance. • Normal Duty rating for Variable Torque • Integral Detachable LCD Operator Keypad/Display Features • Closed-Loop Current Vector, Open-loop Vector & V/f Control modes • Heavy Duty rating for Constant Torque Applications - for example Conveyors & Screw Feeders • Powerful Torque at 0 Hz without sensors or feedback devices • Normal Duty rating for Variable Torque Applications - for example Centrifugal Fans & Pumps • Application Presets, Advanced Energy Saving, Power Loss Ride Through & Recovery, “Safe Torque Off” functional safety Fans Pumps • Multiple options available for comprehensive application performance & complex control • Compact design and side by side mounting reduces installation and space costs • Simple Digital Operator Keypad / Display with 8 keys & 5 digitPart LEDNo. display Price £ Options Description • Easy Set-Up Functions for quick installation & operation £107.40 JVOP-180 Separate LCD Operator Panel YNE087 • Optional Remote LED Keypad / Display JVOP-182 Separate LED Operator Panel YNE027 £62.70 • Serial Communication Option compatible with RS-422/485 communication EUOP-V11001 Keypad IP65 Door Mounting Frame *** Interface YNE020for MEMOBUS £44.20 £10.10 RJ45 Plug Lead Keypad Cable 1.5 meter YNE021 Conveyors Pumps HVAC Winders Fans

AI-A3 Analogue Input Options Description AO-A3 Analogue Output DI-A3 Digital Input JVOP-182 LED Operator Panel * DO-A3 Digital Output EUOP-V11001 Keypad IP65 Door Mounting Frame *** PG-B3 TTL Interface 30kHz RJ45 Plug Lead Keypad Cable 1.5 meter PG-X3 Line Driver Interface 300kHz SI-485/J Ser. Comm. Interf. RS 485 SI-C3 Comm. Interface CCLink SI-232/J Ser. Comm. Interf. RS 232-C SI-N3 Comm. Interface DeviceNET SI-232/JC dito RS232-C (removable) SI-P3 Comm. Interface ProfibusDP AI-V3/J Potentiometer SI-S3 Comm. Interface CANopen JVOP-181 Copy Unit w\USB converter ** SI-T3 Comm. Interface Mechatrolink II EZZ08122A DIN Rail Attachment 1 PS-A10H Power Supply Unit 24VDC (400V) EZZ08122B DIN Rail Attachment 2 PS-A10L Power Supply Unit 24VDC (200V) EZZ08122C DIN Rail Attachment 3 CDBR-4030B 400V Braking Transistor Unit 30kW CDBR-4045B 400V Braking Transistor Unit 45kW * Requires SI-232/J (YNE024) CDBR-4090B 400V Braking Transistor Unit 90kW ** Requires SI-232/JC (YNE025) CDBR-4220B 400V Braking Transistor Unit 220kW ****** Requires Keypad Cable (YNE021) Requires Keypad Cable (YNE021)

www.cromptoncontrols.co.uk

YNE131 Part No. YNE132 YNE133 YNE027 YNE134 YNE020 YNE135 YNE021 YNE136 YNE023 YNE137 YNE024 YNE138 YNE025 YNE139 YNE026 YNE140 YNE028 YNE141 YNE029 YNE142 YNE030 YNE143 YNE154 YNE148 YNE149 YNE150 YNE151

Tel:

£170.00 Price £ £127.50 £102.90 58.00 £102.90 19.70 £102.90 9.30 £102.90 50.70 £242.00 52.80 £156.70 60.00 £411.00 39.30 £174.00 191.50 £223.00 12.40 £174.00 14.50 £174.00 16.60 £563.00 £611.00 £1,680.00 £2,144.00

+44 (0)1924 368251

Conveyors

Compressors

Your Specialist in Variable SpeedMachine Drives Tools Punching Presses Tel: +44 (0)1924 368251 sales@cromptoncontrols.co.uk www.cromptoncontrols.co.uk sales@cromptoncontrols.co.uk

NEW Z1000 HVAC Inverters & Complete Systems

Other Features

• • • • • •

Built-in 5% line impedance for input harmonic reduction Built-in RFI filter to IEC 61800-3 restricted distribution for first environments Embedded BACnet communications with Modbus/Memobus PI feature for pressure, flow or temperature control Low 5kHz carrier frequency with dynamic noise control for quiet motor operation Pre-configured application macros for quick and easy set up

Normal Duty rated with an Overload of 110% of rated output current for 60s or 140% of rated output current for 0.5s.

Z1000 Prices are on application - please contact us to discuss your requirements for these or any of the above inverter modules and complete panel systems for process control or energy saving…

NEW Energy Saving Drive Crompton Controls can help... • Reduce energy consumption • Significantly reduce electricity costs • Obtain rapid paybacks on capital equipment

Energy

• Improve process efficiency • Improve operating cash flow

Saving

Energy Saving with Inverter Drives

• Variable Speed Inverter Drives Save Energy • On Variable Torque / Centrifugal type loads the “rules of thumb” are 10% slower = up to 30% less energy, 20% slower = up to 50% less energy • Many Fans & Pumps run unnecessarily fast and are often oversized • Reducing speed can significantly lower energy cost • Controlling temperature, flow or pressure can substantially improve performance & efficiency

Crompton Controls Offer

• • • • • •

Inverters from Internationally recognised Company Yaskawa Electric Energy Saving Calculator software Full on site Energy Analysis Service if required Technical, Cost and Payback Estimations Inverter modules to fully integrated cubicle systems Complete Commissioning and Service support

Install Approved Drives Reduce Energy Costs Recover Capital Investment

Custom Control Panels & HVAC Systems Crompton Controls provides a complete design and manufacturing service for control systems built to individual requirements from modified standard starters to fully customised control panels. We supply most sectors and applications including pumps, fans, compressors, conveyors and machine tools to any preferred specifications for process control, automation and energy saving, with a specialist new division Crompton Systems focused solely on HVAC Building Management and Control, all made in the United Kingdom.

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Inverter Drives

The Z1000 variable speed drive is specifically designed for HVAC building automation applications such as fans, pumps, and cooling towers. Dedicated features include an easy-to-read LCD keypad with a Hand-Off-Auto interface and a real time clock.

Inverter Drives

NEW Wall Mounting Enclosed Inverters Compact V1000 based Drive Units with IP66 protection for wet and dusty environments

• All the functions and benefits of the standard V1000 inverter plus • Robust, highly sealed and protected enclosure for arduous decentralised locations • Built in oversize LED Operator Keypad/Display for easy reading and handling • Integrated Class C1 EMC filter

V1000 IP66 Enclosed Inverter Three Phase 380-480V AC 50/60Hz with integral RFI Filter Enclosed Inverter Model CIMR-VC4A0001HAA-0080 CIMR-VC4A0002HAA-0080 CIMR-VC4A0004HAA-0080 CIMR-VC4A0005HAA-0080 CIMR-VC4A0007HAA-0080 CIMR-VC4A0009HAA-0080 CIMR-VC4A0011HAA-0080 CIMR-VC4A0018HAA-0080 CIMR-VC4A0023HAA-0080 CIMR-VC4A0031HAA-0080 CIMR-VC4A0038HAA-0080

Normal Duty Amp kW 1.2 0.4 2.1 0.75 4.1 1.5 5.4 2.2 6.9 3 8.8 3.7 11.1 5.5 17.1 7.5 23 11 31 15 38 18.5

Heavy Duty Amp kW 1.2 0.2 1.8 0.4 3.4 0.75 4.8 1.5 5.5 2.2 7.2 3 9.2 4 14.8 5.5 18 7.5 24 11 31 15

Dimensions (mm) H x W x D 340 262 173.5 340 262 173.5 340 262 173.5 340 262 173.5 340 262 173.5 340 262 173.5 340 262 173.5 500 345 273.5 500 345 273.5 500 345 273.5 500 345 273.5

Part No. YNE067 YNE068 YNE069 YNE070 YNE071 YNE072 YNE073 YNE008 YNE009 YNE011 YNE012

Price £ £618 £654 £729 £819 £881 £1,010 £1,250 £1,481 £1,720 £2,054 £2,470

High Performance A1000 based Drive Panels with IP54 protection for harsh environments • All the functions and benefits of the standard A1000 inverter plus • Compact IP54 protected enclosure for demanding decentralised installations • Integral clear text LCD Operator Keypad/Display in 8 languages • Integrated Class C1 EMC filte • Lockable Mains Switch option

A1000 IP54 Enclosed Inverter Three Phase 380-480V AC 50/60Hz with integral RFI Filter Inverter Model CIMR-AC4A0044TAA* CIMR-AC4A0058TAA* CIMR-AC4A0072TAA* CIMR-AC4A0088TAA* CIMR-AC4A0103TAA* CIMR-AC4A0139TAA* CIMR-AC4A0165TAA*

Normal Duty Amp kW 44 22 58 30 72 37 88 45 103 55 139 75 165 90

Heavy Amp 39 45 60 75 91 112 150

Duty kW 18.5 22 30 37 45 55 75

Dimensions (mm) H x W x D1 260 700 400 300 750 465 300 750 465 325 950 555 325 950 555 325 950 555 325 950 555

** (D2) (292) (331) (331) (375) (375) (375) (375)

Part No. YNE042 YNE043 YNE044 YNE045 YNE046 YNE047 YNE048

Price £ £2,518 £3,148 £3,712 £4,247 £4,924 £5,580 £6,783

Part No. YNE050 YNE052 YNE060 YNE061 YNE062 YNE063 YNE064

* Note: For Mains Switch version “-0095” completes model code and the YNE Part No. specifies ype ** Note: "D2" Dimensions in brackets relate to with Mains Switch version

Floor Standing Enclosed A1000 Inverters • Higher power cabinet build on request • Free standing 90 – 315kW modular design • IP23 or IP54 cubicle protection options • Customisation panel extra for special requirements • Product configured & Price available on request

Your Specialist in Inverter Drives TM

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Price £ £3,035 £3,702 £4,313 £4,891 £5,609 £6,346 £7,740

IP54 14 Standard Inverter Panels

The “One For All” Inverter for Multiple Applications including all types of For standard speed control of Pumps, Fans, Compressors, Mixers, Pumps, Fans, Conveyors, Compressors, Mixers and more.... Screw Conveyors and more V1000 Inverter – Single Phase 200–240V AC 50/60Hz – IP20 Module + RFI Filter • • • •

HeavySingle Duty V1000 Phase IP54 Standard Drive Panel

Normal Duty

Single or three phase versions. Inverter Module Amp kW Single Amp kW Part No. £ RFI 230V Filter Output Part No. Price £ Phase 230V 50/60Hz SupplyPrice to Three Phase Standard control features. 1.2 CIMR-VCBA0001BAA 0.2 0.8 0.1 YNE053 202.00 FS23638-10-07 YNE019 21.70 Supplied ready to install. 1.9 CIMR-VCBA0002BAA 0.4 1.6 0.2 Duty YNE054 208.00 FS23638-10-07 21.70 Normal Heavy Duty Approx Panel Size (mm)YNE019 Tailored solutions available on CIMR-VCBA0003BAA 3.3 request. 0.75 Part3.0 0.4 218.00 FS23638-10-07 YNE019 No Amp kW YNE055 Amp kW H x W x D Price £21.70 CIMR-VCBA0006BAA CIMR-VCBA0010BAA CIMR-VCBA0012BAA CIMR-VCBA0018BAA

5.0 0.75 YNE056 256.00 FS23638-20-07 YNE022 30.00 VCBA0001 1.2 0.2 0.18 0.1 500 400 300* £762 8.0 1.5 YNE057 303.00 FS23638-20-07 YNE022 30.00 VCBA0002 1.9 0.4 1.6 0.2 500 400 300* £775 11.0 2.2 YNE058 354.00 FS23638-30-07 YNE065 39.30 VCBA0003 3.3 0.75 3 0.4 600 400 300* £828 17.5 4.0 YNE059 402.00 FS23638-40-07 YNE066 53.80 VCBA0006 6 1.5 5 0.75 600 400 300* £892 £1,088 VCBA0010 9.6 2.2 8 1.5 600 400 300* Note: VCBA0012 12 3 11 2.2 600 400 300* £1,213 Normal Duty = 120% Overload for 60 seconds VCBA0018 17.5 4.0 600 400 300* £1,303 Heavy Duty = 150% Overload for 60 seconds * Wall Mounting @ 0.1 - 15kW Power Ratings The footprint mounting RFI Filter is required NOTE:-Normal Duty = 120% Overload for 60 seconds, Heavy Duty = 150% Overload for 60 seconds for full EMC compliance. @ 200VAC & 400VAC @ 6 Digital Input 1 Pulse Intput Three Phase 400V 50/60Hz Supply to Three Phase 400V Output 2 Analogue Input @ 1 Pulse Output Normal Duty Heavy Duty Approx Panel Size (mm) 1 Analogue Output Part No Amp kW Amp kW H x W xD Price £ 1 Relay Output £1,041 VC4A0001 1.2 0.4 1.2 0.2 500 400 200* @ Safety EN 954-1 cat 3 £1,103 VC4A0002 2.1 0.75 1.8 0.4 500 400 200* VC4A0004 4.1 1.5 3.4 0.75 600 400 300* £1,130 VC4A0005 5.4 2.2 4.8 1.5 600 400 300* £1,439 VC4A0007 6.9 3 5.5 2.2 600 400 300* £1,485 VC4A0009 8.8 4 7.2 3.0 600 400 300* £1,577 VC4A0011 11.1 5.5 9.2 4.0 600 600 300* £1,680 VC4A0018 17.5 7.5 14.8 5.5 800 600 300* £2,142 Normal Duty VC4A0023 Heavy Duty 23 11 18 7.5 800 600 300* £2,307 Inverter Module Amp kW VC4A0031 Amp No. Price £ RFI Filter Part No. 31kW 15 Part 24 11 800 600 300* £2,861Price £ 6.0 9.6 12.0 -

1.1 2.2 3.0 -

V1000 Inverter

V1000 Three Phase IP54 Standard Drive Panel

V1000 Inverter – Three Phase 380-480V AC 50/60Hz – IP20 Module + RFI Filter CIMR-VC4A0001BAA CIMR-VC4A0002BAA CIMR-VC4A0004BAA CIMR-VC4A0005BAA CIMR-VC4A0007BAA CIMR-VC4A0009BAA CIMR-VC4A0011BAA CIMR-VC4A0018FAA CIMR-VC4A0023FAA CIMR-VC4A0031FAA CIMR-VC4A0038FAA

1.2 2.1 4.1 5.4 6.9 8.8 11.1 17.5 23.0 31.0 38.0

0.4 0.75 1.5 2.2 3 3.7 5.5 7.5 11.0 15.0 18.5

1.2 278.00 FS23639-5-07 YNE007 VC4A0038 380.2 18.5 YNE031 31 15 800 600 300* £3,239 37.30 1.8 0.4 YNE032 297.00 FS23639-5-07 YNE007 37.30 * Wall3.4 Mounting 0.75 YNE033 345.00 FS23639-5-07 YNE007 37.30 NOTE:-Normal Duty Overload for369.00 60 seconds, Heavy Duty = 150% Overload for 60 seconds 4.8 1.5 = 120% YNE034 FS23639-10-07 YNE010 47.60 5.5 2.2 YNE035 413.00 FS23639-10-07 YNE010 47.60 7.2 3.0 YNE036 480.00 FS23639-10-07 YNE010 47.60 9.2 4.0 YNE037 525.00 FS23639-15-07 YNE013 56.90 14.8 YNE038 612.00 64.20 00 V 50/60Hz to Three PhaFS23639-30-07 se 400V Output YNE049 Three Phase 45.5 Supply 18.0 7.5 YNE039 709.00 FS23639-30-07 YNE049 64.20 24.0 11.0 YNE040 879.00 FS23639-50-07 YNE051 118.00 Normal Duty Heavy Duty Approx Panel Size (mm) 31.0 15.0 FS23639-50-07 YNE051 118.00 YNE041 1,144.00 Price £ Part No Amp kW Amp kW H x W x D

A1000 Three Phase IP54 Standard Drive Panel

Note: 18.5 AC4A0044 22 800 100 39 44 Normal Duty = 120% Overload for 60 seconds Heavy Duty = 150% Overload for 60 seconds 58 22 800 AC4A0058 1200 30 45 Technical The footprintSpecifications mounting RFI Filter is required for full EMC compliance. AC4A0072 72 37 60 30 1200 800 AC4A0088 88 45 75 37 1600 800 • Robust IP54 sheet steel enclosure. Features AC4A0103 103 55 91 45 1600 800 • Inverter Module with emc filtering • Heavy Duty rating for Constant TorqueAC4A0139 Applications - for example Conveyors Feeders 139 75 112 55 & Screw 1800 600 • Ventilation cooling fans and filters • Normal Duty rating for Variable TorqueAC4A0165 Applications - for example Centrifugal Fans & Pumps 165 90 1800 1000 150 75 where rating requires. AC4A0208 208 110 180 90 1800 1200 • Door interlocked mains isolator. AC4A0250 250 132 216 110 1800 1200 All the features of the J1000 plus more including, • Supply Contactor with power On/Off 296 or 160 132 1800 1600 • Selectable Control Method: Open-LoopAC4A0296 Current Vector simple 260 V/f

£3,610 300* £4,324 400* £5,041 400* £6,026 400** £6,984 400** 400** Compressors Machine Tools£7,923 £9,408 400** £11,121 500** 500** £12,474 £15,122 500**

push buttons. • Standard AC Induction Motor or Energy Saving Permanent Magnet Motor Control * Wall Mounting Inverter Start/Stop push buttons. • Application parameter pre-settings shorten set-up time ** Floor Mounting Speed potentiometer. • Energy Saving Mode, PID control, Sleep Function, Duty Auto-tuning, NOTE:-Normal = 120% Overload for 60 seconds, Heavy Conveyors Duty = 150% Overload Fans for 60 seconds Pumps Mains on lamp. • Dual Safety Input: safety category 3 (EN954-1), stop category) and IEC-61508 SIL2 Emergency stop (Category 1) - via mains contactor. Options Description Part No. Price £ • Door mounted operator display. JVOP-180 Seperate LCD Operator Panel YNE087 99.40

• • • •

JVOP-182 Separate LED Operator Panel YNE027 58.00 EUOP-V11001 Keypad IP65 Door Mounting Frame *** YNE020 19.70 RJ45 Plug Lead Keypad Cable 1.5 meter YNE021 9.30 Available on request Fans Pumps Conveyors Compressors Machine Tools PS-V10S ext.24V power supply upto 4kW YNE080 124.20 PS-V10M ext.24V power supply 5,5-15kW YNE081 134.60 • Additional control functionality. SI-C3/V Comm.Interface CC Link YNE082 216.00 • Dynamic Braking. Please refer to pages 15 & 16 for the complete drives specification and range SI-N3/V Comm.Interface DeviceNet YNE083 149.00 • Serial Communications. of common and application available. SI-P3/V Comm.Interface Profibus DP YNE084 options 228.00 • Stainless Steel or preferred paint finish. SI-S3/V Comm.Interface CANopen YNE085 163.50 • Larger enclosures. All cubicle II dimensionsYNE086 are approximate only and may be affected where further options SI-T3/V Comm.Interface Mechatrolink 412.00 • Fully customised driveCopy systems. or tailored solutions are required, please consult us with your exact requirements. JVOP-181 Unit RS232/USB YNE028 191.50 EZZ08122A DIN Rail Attachment 1 YNE029 12.40 EZZ08122B DIN Rail Attachment 2 YNE030 14.50 EZZ08122C DIN Rail Attachment 3 YNE154 16.60 IP66 Single and Three Phase V1000 EZZ08122D DIN Rail Attachment 4 YNE155 18.60 Inverter Modules c/w RFI Filter also *** Requires Keypad Cable (YNE021)

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

Available on request sales@cromptoncontrols.co.uk

Inverter Drives

NEW Generation Variable Speed Drives

A Standard range of inverter drive cubicles pre-engineered for immediate installation Complete with the NEW Yaskawa V1000 & A1000 inverter modules

Contactors & Accessories

4AC Contactors & Accessories up to 105A

Standard Starters

Direct-on-Line

• WEATHERPROOF IP55 • Surface Mounting Type: 3DL • Built in Start/Stop Reset Push buttons Max FLC

Approx.

(415V 3ph)

• Single Phase or Three Phase • Standard Coil Voltages: 50/60Hz • Hand reset thermal overloads Without Isolator & Mains Fuses Type

(hp)

With Isolator

Price £

7.5

(10)

AC3 11

kW (15)

3DL2

Aux 3DL3 Contacts 3DL4

With Isolator & Fuses

Type

12 5.5 (7.5) Contactors 3DL1 - -(S 66.00 Coil) Three Pole AC Price includes 18

• Colour RAL7035 Light Grey • 24V, 48V, 110V, 230V, 400V, 440V others on request • Provision for remote control

Price £

Type

Price £

3DL1

-- I

147.20

3DL1

-- F

-- S

79.50

3DL2

-- I

158.30

-- F

233.00

- AC-1 -S

85.80

3DL3

kW 162.00

3DL2

@184.50 415V

Aux 3DL3 Contacts 3DL4

- - F AC-1

255.00

- AC3 -I

191.50

Price £ 119.20

Type 3DL4

1 x N/O 3DLA5 - -25A S

£27.30 202.00

CC2501 3DLA5 - - 32A I

299.00 15

1 x N/C 3DLA5 - - F

40A

£55.80 365.00

(35) 5.5

3DL5 1 x N/C

- -25A S

245.00 £27.30

3DL5 - - 40A I CC3210

382.00 18.5

3DL5 1 x N/O

-- F

50A

518.00 £72.40

30 18A

(40) 7.5

3DL6 1 x N/O

- -25A S

306.00 £28.70

3DL6 - - 40A I CC3201

424.00 18.5

3DL6 1 x N/C

-- F

50A

557.00 £72.40

80 CC1201

37 18A

(50) 7.5

3DL07 - - 25A S 1 x N/C

3DL07 - - 50A I CC4011

520.00 22

1 x N/O, 3DL07 1 x N/C- - F

60A

808.00 £99.30

100 CC1810

55 25A

(75) 11

3DL08 - - 32A S 1 x N/O

382.00 £28.70

180 CC2510

90 32A (125) 15

3DL09 - - 32A S 1 x N/C

3DL10 - - 40A S 1 x N/O 3DL11 - - S

650.00 £37.70

3DL09 - - 80A I CC6511

1,099.00 37

1 x N/O, 3DL09 1 x N/C- - F

80A 1,460.00 £139.20

CC0910 40

Rating @ 415V 15 (20) 12A (25) 5.5 18.5

50 CC0901

26 12A

55 CC1210

Type 32

140 CC1801

75 25A (100) 11

200

110

(150)

220

132

(175)

-Rating -S

3DL12 - - S

503.00 £37.70

-Rating -I

3DL08 - - 65A I CC5011

919.00 £55.80

3DL10 - -105A I CC8011

975.00

3DL11 - - I

1,044.00

3DL12 - - I

769.00 30

1,367.00 55

Price £ - - F Rating 287.00

1 x N/O, 3DL08 1 x N/C- - F

1,524.00

1 x N/O, 3DL10 1 x N/C- - F 3DL11 - - F

1,647.00

3DL12 - - F

80A 1,126.00 £129.60 125A1,632.00 £167.60 1,811.00

2,158.00

From Below - Add required AC Voltage & Frequency to Contactor Type to complete the reference, eg, CC1210-400-50/60 Up to 18 amps - Deduct: £29.40 18 to 25 amps - Deduct: £32.10

Where a starter is required without overload, deduct the appropriate overload price as follows:

For Direct-on-Line Starters above 132kW – P.O.A.

CC Range AC Coils

Standard Dual 50/60Hz

Special Dual 50/60Hz

Special 60Hz Only

Voltages Available

24V, 48V, 110V, 230V, 400V, 440V

120V, 220V, 240V, 380V, 415V, 480V, 500V

208V, 277V, 600V

Spare Contactor Coils Type*

Price £

CX09-18 Fit 09 to 18 Contactors

£12.00

CX25-32 Fit 25 to 32 Contactors

£15.30

CX40-80 Fit 40 to 80 Contactors

£23.90

*As above - Add the required AC Voltage and Frequency to Contactor and Coil Type

Mechanical Interlocks Type

Price £

CML09-32 Fit 09 to 32 Contactors

£5.90

Note: Highlighted Enclosures are Crompton Controls pressed steel with removable £8.80 FitHinged 40 to 65 Contactors lids. CML40-65 All others have doors with dimensions available on request

CML80

Fit 80 Contactors

Pressed Steel Enclosure Dimensions Ref

£8.80

Add-On Auxiliary Contact Blocks

Star-Delta

CBF22

(15)

3SD1 - - S

(20)

3SD2 - - S

(30)

3SD3 - - S

Fit 09 to 80 Contactors

55Side 30 (40) Mounting 69

138

Type

CBS20

257.00

(223.00)

265.00

(231.00)

309.00

(274.00)

£12.90

CBF01

3SDA5 - - S

(60)

3SD05 - - S

(75)

3SD06 - - S

(100)

3SD07 - - S

Fit 09 to 80 Contactors

510.00

(475.00)

533.00

(494.00)

703.00

(660.00)

Price £

£10.10

CBS11

858.00

160Pneumatic 90 (125) 3SD08 -- -Front S 941.00 Timer Block Mounting 208

110

(150)

3SD09 - - S

1,135.00

250

150

(175)

3SD10 - - S

1,744.00

310

185

(250)

3SD10 - - S

1,744.00

Type

CTD3

346CTD30 200

3 sec delay off

30 sec delay 3SD11 off (287) -- S CTD180 180 sec delay off 380 220 (300) 3SD12 -- S

184 x 184 x 149

140 x 140

Size 3

184 x 284 x 149

140 x 240

Size 4

305 x 285 x 159

260 x 240

• Wye-Delta Connected •Price 24V, 48V, 110V, 230V, 400V, 440V others on request £ • Provision for remote control £12.90

80 Conta ctors £12.90 Contactors Isolator £12.90 Only) 80 Conta ctors (Interior Contactors Price £ Price £ £7.20 80 Contactors Contactors

With Isolator & Fuses

(Interior Only) Price £ Price £

Type

3SD1

-- I

307.00 (274.00)

3SD1

-- F

345.00

(313.00)

3SD2

-- I

313.00 (283.00)

3SD2

-- F

365.00

(320.00)

3SD3

-- I

427.00 (387.00)

3SD3

-- F

578.00

(555.00)

576.00 (540.00)

3SD04 - - F

674.00

(633.00)

3SDA5 - - I

682.00 (646.00)

3SDA5 - - F

862.00

(822.00)

3SD05 - - I

705.00 (666.00)

3SD05 - - F

886.00

(846.00)

3SD06 - - I

1,021.00 (990.00)

3SD06 - - F

1,208.00 (1,175.00)

3SD07 - - I

1,204.00

3SD07 - - F

1,563.00

3SD08 - - I

1,466.00

3SD08 - - F

1,823.00

3SD09 - - I

1,681.00

3SD09 - - F

2,025.00

3SD10 - - I

3,002.00

3SD10 - - F

3,680.00

3SD10 - - I

3,002.00

3SD10 - - F

3,680.00

3SD11 - - F

3,845.00

3SD12 - - F

4,011.00

£7.20

Fit 40 to 80 Conta ctors Contactors

Type

Price £

Fit 09 to 80 Conta Contactors ctors

£10.10

Price £ £46.10

CTE3

3 sec del dela ay o on n

CTE30

£46.10 1,922.00

CTE180

30 sec dela delay- -on oIn 3,103.00£46.10 3SD11 1803SD12 sec dela y dela on 3,157.00£46.10 - - Ion

Where a starter is required without overload, deduct the appropriate overload price as follows: Up to 30 amps - Deduct: £29.40 31 to 43 amps - Deduct: £32.10

x W (mm)

Size 2

£46.10 £46.10

1,811.00

130 x 60

Type

Price £

Fixings 4 x 4.5mm Diameter

174 x 104 x 134

3SD4 -- S 400.00 (365.00) 3SD4 -- I - N/O Contacts first digit, N/C second digit

(50)

W x D (mm)

Size 1

Front Mounting N/O Contacts first digit, N/C second digit • WEATHERPROOF IP55 -(INTERIORS ONLY: IP00) • Three Phase • Surface Voltages: 50/60Hz Type Mounting Type: 3SD Type Price £ • Standard Coil • Built in Start/Stop Reset Push buttons • Hand reset thermal overloads CBF31 Fit 09 to 80 Conta Contactors ctors CBF20 Fit 09 to 80 Contactors £7.90 CBF40 Fit 09 to Fit 09 to 80 Contactors MaxCBF02 FLC Without Isolator£7.90 & Mains Fuses With 415V CBF11Approx. Fit 09 to 80 Contactors £7.90 (Interior CBF04Only)Fit 09 to 3ph kW (hp) Type Price £ Price £ Type CBF13 Fit 09 to 80 Contactors £12.90 CBF10 Fit 40 to

For Star Delta Starters above 220kW and Interiors only above 55kW – P.O.A.

For high inertia/long run up times please refer to our design engineers.

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras TM

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Thermal Overloads & Accessories up to 93A

Used in Series 3000 Starters

Manual/Automatic utomatic Reset

Thermal Overload Relays - Manual Reset Type CR Type

Price £

Type

CR09/0.25

0.16-0.25

Fit 09 to 32 Contactors

£30.30

CR16/18

13-18

Fit 09 to 32 Contactors

£30.30

CR09/0.4

0.25-0.4

Fit 09 to 32 Contactors

£30.30

CR25/25

18-25

Fit 09 to 32 Contactors

£33.00

Amps Range

CR09/0.63 CR09/1

0.4-0.63 0.63-1

Price £

Amps Range

Fit 09 to 32 Contactors

£30.30

CR32/32

23-32

Fit 25 to 32 Contactors

£55.70

Fit 09 to 32 Contactors

£30.30

CR32/40

28-40

Fit 25 to 32 Contactors

£55.70 £76.70

CR09/1.6

1.0-1.6

Fit 09 to 32 Contactors

£30.30

CR40/32

23-32

Fit 40 to 65 Contactors

CR09/2.5

1.6-2.5

Fit 09 to 32 Contactors

£30.30

CR40/40

30-40

Fit 40 to 65 Contactors

£76.70

CR09/4

2.5-4

Fit 09 to 32 Contactors

£30.30

CR63/50

38-50

Fit 40 to 65 Contactors

£79.90

CR09/6

4.0-6

Fit 09 to 32 Contactors

£30.30

CR63/57

48-57

Fit 40 to 65 Contactors

£79.90

CR09/8

5.5-8

Fit 09 to 32 Contactors

£30.30

CR63/66

57-66

Fit 40 to 65 Contactors

£81.90

CR09/10

7.0-10

Fit 09 to 32 Contactors

£30.30

CR80/80

66-80

Fit to CC65 Contactor

£82.90

CR12/13

10-13

Fit 09 to 32 Contactors

£30.30

Type CMB Mounting Bracket req'd for use with CC80 Contactor

Manual Relay Mounting Brackets Type CMB Type

Price £ £6.70

CMB09-25

for relays CR09-25

CMB32

for relays CR32

£10.90

CMB40-80

for relays CR40-80

£25.00

Manual Overload Relay Mounting Start Contacts Type

Price £

CSC09-25B

fits relays CR09-25

3.80

CSC32B

fits relays CR32 Only

Start Contacts for Manual Overload Relays only and used in

3.80

Series 3000 Starters

Thermal Overload Relays - Manual/Automatic Reset Type CRA Type

Amps Range

Price £

Type

Price £

Amps Range

CRA09/0.25

0.16-0.25

Fit 09 to 32 Contactors

£36.60

CRA16/18

12-18

Fit 09 to 32 Contactors

£36.60

CRA09/0.4

0.25-0.4

Fit 09 to 32 Contactors

£36.60

CRA25/25

18-25

Fit 09 to 32 Contactors

£39.50

Fit 09 to 32 Contactors

£36.60

CRA32/32

23-32

Fit 25 to 32 Contactors

£62.20

Fit 09 to 32 Contactors

£36.60

CRA32/36

28-36

Fit 25 to 32 Contactors

£62.20

£36.60

CRA40/32

23-32

Fit 40 to 95 Contactors

£83.10

CRA09/0.63 CRA09/1

0.4-0.63 0.63-1

CRA09/1.6

1.0-1.6

Fit 09 to 32 Contactors

CRA09/2.5

1.6-2.5

Fit 09 to 32 Contactors

£36.60

CRA40/40

30-40

Fit 40 to 95 Contactors

£83.10

CRA09/4

2.5-4

Fit 09 to 32 Contactors

£36.60

CRA65/50

37-50

Fit 40 to 95 Contactors

£86.30

CRA09/6

4.0-6

Fit 09 to 32 Contactors

£36.60

CRA65/65

48-65

Fit 40 to 95 Contactors

£86.30

CRA09/8

5.5-8

Fit 09 to 32 Contactors

£36.60

CRA65/70

55-77

Fit 40 to 95 Contactors

£88.40

CRA09/10

7.0-10

Fit 09 to 32 Contactors

£36.60

CRA80/80

63-80

Fit 40 to 95 Contactors

£89.40

CRA12/13

9-13

Fit 09 to 32 Contactors

£36.60

CRA80/93

80-93

Fit 40 to 95 Contactors

£96.90

Automatic Relay Mounting Brackets Type CMBA Type

Price £

CMBA09-25

for relays CRA09-25

CMBA32

for relays CRA32

£10.90

CMBA40-80

for relays CRA40-80

£25.00

£6.70

Four Pole Contactor Style Control Relays Type*

Contacts

Price £

CCR22

2 x N/O & 2 x N/C

£28.60

CCR31

3 x N/O & 1 x N/C

£28.60

CCR40

4 x N/O Only

£28.60

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

* Add required AC voltage and Frequency to Relay Coil Type CBF/CBS Type Contactor Auxiliary Contact Blocks and CX Type Contactors Coils can be fitted

sales@cromptoncontrols.co.uk

Contactors & Accessories

Manual Overload erload Reset

Contactors & Accessories

4NEW 3-Pole AC Contactors, Overloads & Accessories

Standard Starters

Direct-on-Line

• WEATHERPROOF IP55 • Surface Mounting Type: 3DL • Built in Start/Stop Reset Push buttons Max FLC

Approx.

(415V 3ph)

5.5

7.5

• Single Phase or Three Phase • Standard Coil Voltages: 50/60Hz • Hand reset thermal overloads Without Isolator & Mains Fuses Type

(hp)

With Isolator & Fuses

Three Pole AC Contactors 115 to 780A (Type Price includes Price 230V£ Coil)

3DL1

-- S

3DL2

-- S

Type 79.50 85.80

Type

66.00

(15)

3DL3

-- S

(20)

3DL4

-- S

18.5

(25)

3DLA5 - - S

(35)

3DL5

-- S

(40)

3DL6

-- S

(50)

3DL07 - - S

100

(75)

3DL08 - - S

140

(100)

3DL09 - - S

180

(125)

3DL10 - - S

200

110

(150)

3DL11 - - S

CCF115A 119.20 CCF150A 202.00 CCF185A 245.00 CCF225A 306.00 CCF265A 382.00 CCF330A 503.00 CCF400A 650.00 CCF500A 919.00 CCF630A CCF780A 975.00

220

132

(175)

3DL12 - - S

1,044.00

Where a starter is required without overload, deduct the appropriate overload price as follows:

• 24V, 48V, 110V, 230V, 400V, 440V others on request • Provision for remote control

With Isolator

Price £

(10)

(7.5)

• Common family of 3 & 4-pole versions • Simple & robust construction • High mechanical & electrical life ••Colour RAL7035 Full range ofLight add Grey on accessories

Price £

3DL1

-- I

147.20

3DL1

3DL12 - - I

-- F

Part No 230V 3DL2 - - F 50/60Hz Coil 3DL3 - - F CO482 3DL4 - - F CO483 3DLA5 CO484 - - F 3DL5 - - F CO485 3DL6 - - F CO486 3DL07 - - F CO487 3DL08 - - F CO488 3DL09 - - F CO489 3DL10 - - F CO490 3DL11 - - F CO491

AC-1 AC-3 3DL2 - - I 158.30 Rating (A) Rating (A) 3DL3 - - I 115 162.00 200 3DL4 - - I 150 184.50 250 3DLA5 - - I 185 299.00 275 3DL5 - - I 225 382.00 315 3DL6 - - I 265 424.00 350 3DL07 - - I 330 520.00 400 3DL08 - - I 400 769.00 500 3DL09 - - I 500 1,099.00 700 3DL10 - - I 630 1,367.00 1000 3DL11 - - I 780 1,524.00 1600 1,647.00

191.50

Price 233.00

255.00

£346

287.00 £371

365.00 £469 518.00 £495

557.00 £666 808.00 £851

1,126.00 £1,010 1,460.00 £1,645 1,632.00 £2,089 1,811.00 £4,385

3DL12 - - F

2,158.00 *Other coil voltages available on request Up to 18 - Deduct:Open £29.40& 2 x Normally Closed For Direct-on-Line above 132kW – P.O.A. 2 amps x Normally Auxiliary Starters Contacts Included 18 to 25 amps - Deduct: £32.10

Thermal Overload Relays 65 to 800A Man/Auto Reset Type CRF Type CRF105 CRF125 CRF160 CRF200 CRF250 CRF315 CRF400 CRF500 CRF630 CRF800 Note: Highlighted Enclosures are Crompton Controls pressed steel with removable

Price £

Part No.

Amps Range 65-105 80-125 100-160 125-200 160-250 200-315 250-400 315-500 400-630 500-800

OL215 £138.40 OL216 £141.20 OL217 £145.60 OL218 £169.80 OL219 £181.50 OL220 £191.90 OL221 £209.00 OL222 £234.00 OL223 £264.00 OL224 £295.00 Pressed Steel Enclosure Dimensions Fixings 4 x 4.5mm Diameter

lids. All others have Hinged doors with dimensions available on request

Ref

W x D (mm)

x W (mm)

Size 1

174 x 104 x 134

130 x 60

Size 2 Accessories for 3 & 4-Pole Contactors Size 3

184 x 184 x 149

140 x 140

184 x 284 x 149

140 x 240

Size 4

305 x 285 x 159

260 x 240

Protective Shrouds for Contactor Terminals Star-Delta

• WEATHERPROOF IP55 ONLY: IP00) • Three Phase 4-Pole 3-Pole Set(INTERIORS of 6 Shrouds £ Part• No. • Surface 3SD StandardPrice Coil Voltages: 50/60Hz Type Type Mounting Type: For Contactor • Built in Start/Stop Reset Push buttons • Hand reset thermal overloads

CA9-F701 CA9-F702 Max FLC CA9-F703 415V Approx. 3ph kW (hp) CA9-F704

• Wye-Delta Connected Set of 8 Shrouds Price £ No. • 24V, 48V, 230V, 400V, 440VPart others on request For110V, Contactor • Provision for remote control

CO512 CO492 CCF115A £30.00 £23.60 CCF1154A CA9-F706 CA9-F707 CO513 CO493 CCF150-CCF185 £35.50 £26.10 CCF150-1854A Without Isolator & Mains Fuses With Isolator With Isolator & Fuses CA9-F708 (Interior Only) (InteriorCCF225-CCF5004A Only) (Interior£41.60 Only) CCF225-CCF500A CO514 CO494 £32.90 Type Price CO495 £ Price £ £61.50 Type Price £ Price £ Type Price £ Price £ CA9-F709 CCF630-780A £77.40 CCF6304A CO515

(15)

3SD1 - - S

257.00

(223.00)

3SD1

-- I

307.00 (274.00)

3SD1

-- F

345.00

(313.00)

(20)

3SD2 - - S

265.00

(231.00)

3SD2

-- I

313.00 (283.00)

3SD2

-- F

365.00

(320.00)

(30)

3SD3 - - S

AC Contactor Coils 30 (40) 3SD4 - - S

309.00

(274.00)

3SD3

-- I

427.00 (387.00)

3SD3

-- F

578.00

(555.00)

400.00

(365.00)

3SD4

-- I

576.00 (540.00)

3SDA5 - - S

510.00

(475.00)

3SDA5 - - I

682.00 (646.00)

3SD05 - - S

533.00

(494.00)

3SD05 - - I

705.00 (666.00)

£31.80 £75.30 £130.10 £134.30 £166.70 £232.00

3SD07 - - I

55 69

(50)

(60)

Type

For Contactor

CCFFE-xx 98 55 (75)

115-150 3SD06 - - S 185-225 3SD07 - - S 265-330 3SD08 - - S 400 - - S 3SD09 500 - - S 3SD10 630 - - S 3SD10 780 - - S 3SD11

CCFGE-xx 138 75 (100)

CCFH2E-xx 160 90 (125)

CCFJE-xx 208 110 (150)

CCFKE-xx 250 150 (175) CCFCE-xx 310 185 (250) CCFE-xxx 346 200 (287) 380 220 Replace

703.00 858.00 941.00 1,135.00 1,744.00 1,744.00 1,811.00

Price £

£30.10 (660.00)

3SD06 - - I 3SD08 - - I 3SD09 - - I 3SD10 - - I 3SD10 - - I 3SD11 - - I

DC Contactor Coils 3SD04 - - F Type

CC4FKE-xx 3,002.00 CC4FCE-xx 3,002.00 CC4FE-xxx 3,103.00

(300) 3SD12 - - S 1,922.00 3SD12 - I 3,157.00 "xx" below with required voltage i.e. 24, 48, 110, 230, -400, 440V

Where a starter is required without overload, deduct the appropriate overload price as follows: Up to 30 amps - Deduct: £29.40 31 to 43 amps - Deduct: £32.10

For Star Delta Starters above 220kW and Interiors only above 55kW – P.O.A.

862.00

(822.00)

3SD05 - - F

886.00

(846.00)

185-225 3SD07 -- F

1,563.00

115-150 3SD06 -- F

CC4FH2E-xx 1,466.00 CC4FJE-xx 1,681.00

(633.00)

3SDA5 - - F

For Contactor

CC4FF E- xx 1,021.00 (990.00) CC4FGE-xx 1,204.00

674.00

265-330 3SD08 -- F

400- - F 3SD09

500- - F 3SD10 630- - F 3SD10

£42.80 1,208.00 (1,175.00) 1,823.00 2,025.00 3,680.00 3,680.00

780- - F 3SD11

3,845.00

3SD12 - - F

4,011.00

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

£49.80 £86.60 £149.50 £154.50 £191.80 £264.00

For high inertia/long run up times please refer to our design engineers.

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras TM

Price £

sales@cromptoncontrols.co.uk

4-Pole AC Contactors, Accessories & Built Up Sets 4 Direct-on-Line

• WEATHERPROOF IP55 • Surface Mounting Type: 3DL • Built in Start/Stop Reset Push buttons Max FLC Approx. 4-Pole Contactors (415V 3ph) kW (hp) & Accessories 12

5.5

• Single Phase or Three Phase • Standard Coil Voltages: 50/60Hz • Hand reset thermal overloads

Without Isolator & Mains Fuses With Isolator Pre-assembled

(7.5)

• Fully18rated 4th7.5 pole(10) 25 11 (15) • Simple & robust construction 32 15 (20) • High mechanical & electrical life 40 18.5 (25) • Full range of add on accessories 50 26 (35) • Interlocked pair under one part 55 30 (40) number available

Type

Price £

3DL1

-- S

66.00

3DL2

-- S

79.50

3DL3

-- S

3DL4

-- S

3DLA5 - - S 3DL5

-- S

3DL6

-- S

Type

Contactor Sets 3DL1

-- F

3DL2

-- F

233.00

3DL3

-- F

255.00

3DL4

191.50

3DL5

-- F

518.00

3DL6

-- F

557.00

382.00

3DL07 - - I

520.00

3DL07 - - F

808.00

3DL08 - - I

769.00

3DL08 - - F

1,126.00

(75)

3DL08 - - S

503.00

140

(100)

3DL09 - - S

650.00

90 Contactors (125) -S 919.00Coil) Four180Pole AC (3DL10 Price -includes 230V 3DL11 - - S

3DL1

287.00

100

(150)

147.20

365.00

3DL07 - - S

132

Price £

-- F

(50)

110

Type

3DLA5 - - F

200

-- I

With Isolator & Fuses Price £

3DL2 -- I 158.30 • Ideal for generator changeover 85.80 3DL3 - - I 162.00 • 2 x 4-Pole Contactors 119.20 3DL4 - - I 184.50 • 230V 50/60Hz Coils Standard * 299.00 202.00 3DLA5 - - I • 2 x CBF11 Contact Blocks 245.00 3DL5 - - I 382.00 • 1 x Mechanical Interlock & rail 306.00 3DL6 - - I 424.00 • 1 x Mounting Base plate if required

Type 220

• Colour RAL7035 Light Grey • 24V, 48V, 110V, 230V, 400V, 440V others on request • Provision for remote control

975.00

3DL09 - - I

1,099.00

3DL09 - - F

1,460.00

3DL10 - - I

1,367.00

3DL10 - - F

1,632.00

3DL11 - - I

1,524.00

3DL11 - - F

1,811.00

AC-1 AC-3 Stock Part No. 230V Price -£- I (175) 3DL12 - - S 1,044.00 3DL12 Rating (A) Rating (A) 50/60Hz Coil Up to 18CO445 amps - Deduct: £29.40 CCF09004 £33.50 25without overload, 9 deduct Where a starter is required 18 to 25CO446 amps - Deduct: £32.10 the appropriate overload 25 price as follows: 12 CCF12004 £38.00 CCF25004 £59.60 40 25 CO448 CCF40004 £115.40 60 40 CO449 CCF50004 £128.30 80 50 CO450 CCF65004 £153.40 80 65 CO451 CCF80004 £217.00 125 80 CO452 CCF95004 £241.00 125 95 CO453 CCF1154A £374.00 200 115 CO454 CCF1504A £402.00 250 150 CO455 CCF1854A £505.00 275 185 CO456 CCF2254A £512.00 315 225 CO457 CCF2654A £731.00 350 265 CO458 CCF3304A £916.00 400 330 CO459 CCF4004A £1,086.00 500 400 CO460 CCF5004A £1,770.00 700 500 CO461 CCF6304A £2,243.00 1000 630 CO462 Note: Highlighted Enclosures are Crompton Controls pressed steel with removable

lids. All others have Hinged doors on withrequest dimensions available on request Other coil voltages available

Interlocked Pair Part £ 3DL12 - - F Price 2,158.00 Number £88.70 CO426Starters above 132kW For Direct-on-Line – P.O.A. £97.50 CO427 £140.80 CO429 £255.00 CO430 £281.00 CO431 £331.00 CO432 £459.00 CO433 £496.00 CO434 £850.00 CO435 £908.00 CO436 £1,124.00 CO437 £1,138.00 CO438 £1,585.00 CO439 £1,955.00 CO440 £2,295.00 CO441 £3,663.00 CO442 £4,631.00 CO443

1,647.00

Pressed Steel Enclosure Dimensions Ref

W x D (mm)

CF1154A and above 2 x Normally Open & 2 x Normally Closed Auxiliary Contacts Included Size 1 174 x 104 x 134 Size 2

Fixings 4 x 4.5mm Diameter H

x W (mm)

130 x 60

184 x 184 x 149

140 x 140

Size 3 Plates 184 xBase 284 x 149 140 x 240 Mechanical Interlocks complete with rail - Larger sizes also require Base Plates for CCF115 to CCF630

Size 4 305 x 285 x 159 260 xNo. 240 Price £ Price £ Part Contactor CCF115 & CCF150 MI020 £67 £5.90 • WEATHERPROOF IP55 (INTERIORS ONLY: IP00) • Three Phase • Wye-Delta Connected CML40-65 CC40 to CC65 £8 &230V, CCF225 £67 • Surface Mounting Type: 3SD • .80 Standard Coil Voltages: 50/60Hz • 24V,CCF185 48V, 110V, 400V,MI021 440V others on request CML80 CC80Reset to CC95 £8 CCF2654A £67 • Built in Start/Stop Push buttons • .80 Hand reset thermal overloads • Provision for remote controlMI022 CML-FF970 CCF115 to CCF150 £20.60 MI023 CCF3304A £67 Max FLC Fuses With Isolator & Fuses £67 CML-FG970 CCF185 toWithout CC225 Isolator & Mains MI024 CCF4004A With Isolator £30.90 415V Approx. (Interior Only) (Interior Only) (Interior CML-FJ970 CCF265 to CCF500 CCF5004A £41.20 MI025 £67 Only) 3ph kW (hp) Type Price £ Price £ Type Price £ Price £ Type Price £ Price £ CML-FL970 CCF630 MI026 CCF6304A £67 £61.70

For Contactors Star-Delta CML09-32 CC09 to CC25

3SD1 - - S

257.00

(223.00)

3SD1

-- I

307.00 (274.00)

3SD1

-- F

345.00

(313.00)

15 (20)Contact 3SD2 -- S Auxiliary Blocks

265.00

(231.00)

3SD2

-- I

313.00 (283.00)

3SD2

-- F

365.00

(320.00)

(30) & Accessories 3SD3 - - S on 309.00 (274.00) See 43 3 Pole 22 Contactors page 20

3SD3

-- I

427.00 (387.00)

3SD3

-- F

578.00

(555.00)

Add30 On

(15)

(40)

3SD4 - - S

400.00

(365.00)

3SD4

-- I

576.00 (540.00)

3SD04 - - F

674.00

(633.00)

(50)

3SDA5 - - S

510.00

(475.00)

3SDA5 - - I

682.00 (646.00)

3SDA5 - - F

862.00

(822.00)

(60)

3SD05 - - S

533.00

(494.00)

3SD05 - - I

705.00 (666.00)

3SD05 - - F

886.00

(846.00)

(990.00)

3SD06 - - F

1,208.00 (1,175.00)

Auto Failure & Generator Set Control Panels 98 Mains 55 (75) 3SD06 -- S 703.00 (660.00) 3SD06 - - I 1,021.00 138 75on(100) 3SD07 - - I 1,204.00 available request3SD07 - - S 858.00

3SD07 - - F

1,563.00

160

(125)

3SD08 - - S

941.00

3SD08 - - I

1,466.00

3SD08 - - F

1,823.00

208

110

(150)

3SD09 - - S

1,135.00

3SD09 - - I

1,681.00

3SD09 - - F

2,025.00

3SD10 - - I

3,002.00

3SD10 - - F

3,680.00

3SD10 - - I

3,002.00

3SD10 - - F

3,680.00

3SD11 - - I

3,103.00

3SD11 - - F

3,845.00

3SD12 - - I

3,157.00

3SD12 - - F

4,011.00

Control of Emergency & Standby Power Systems 250 150 3SD10 - - S 1,744.00 Wide range of (175) AMF/Genset Relay Controllers 310 185 (250) 3SD10 - - S 1,744.00 Complete changeover control panels 346 200 (287) 3SD11 - - S 1,811.00 Measure & show volts, amps, power factor, power 380 220 (300) 3SD12 - - S 1,922.00 GPRS/GSM & SMS communications connectivity Where a starter is required without overload, deduct the appropriate overload price as follows: Up to 30 amps - Deduct: £29.40 31 to 43 amps - Deduct: £32.10

For Star Delta Starters above 220kW and Interiors only above 55kW – P.O.A.

For high inertia/long run up times please refer to our design engineers.

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Contactors & Accessories

Standard Starters

Contactors & Accessories

4NEW Capacitor Duty Contactors 2.5 to 60kVAr

Standard Starters

Direct-on-Line

â&#x20AC;˘ WEATHERPROOF IP55 â&#x20AC;˘ Surface Mounting Type: 3DL â&#x20AC;˘ Built in Start/Stop Reset Push buttons Max FLC

Approx.

â&#x20AC;˘ Single Phase or Three Phase â&#x20AC;˘ Standard Coil Voltages: 50/60Hz â&#x20AC;˘ Hand reset thermal overloads Without Isolator & Mains Fuses

â&#x20AC;˘ Colour RAL7035 Light Grey â&#x20AC;˘ 24V, 48V, 110V, 230V, 400V, 440V others on request â&#x20AC;˘ Provision for remote control

With Isolator

â&#x20AC;˘ Dedicated Capacitor Duty Contactor Range kW (hp) Type Price ÂŁ â&#x20AC;˘ Capacitor Bank Switching AC-6b Utilisation Category (7.5) of high in-rush 3DL1 - -currents S 66.00 damping â&#x20AC;˘12Excellent5.5 7.5 (10) & electrical 3DL2 79.50 life - - S â&#x20AC;˘18High mechanical 25 11 (15) 3DL3 S 85.80 â&#x20AC;˘ Price includes 230V Coil - other coils on request

With Isolator & Fuses

Type

(415V 3ph)

Price ÂŁ

Type

Price ÂŁ

3DL1

-- I

147.20

3DL1

-- F

3DL2

-- I

158.30

3DL2

-- F

191.50 233.00

3DL3

-- I

162.00

3DL3

-- F

255.00

(20)

3DL4

-- S

119.20

3DL4

-- I

184.50

3DL4

-- F

287.00

18.5

(25)

3DLA5 - - S

202.00

3DLA5 - - I

299.00

3DLA5 - - F

365.00

(35)

3DL5

245.00

3DL5

-- I

382.00

3DL5

-- F

518.00

3DL6

-- I

424.00

3DL6

-- F

557.00

3DL07 - - I

520.00

3DL07 - - F

808.00

-- S

306.00 55 30 (40) Capacitor 3DL6Duty -- S Three Pole AC Contactors 80

100 Type

140

(50)

3DL07 - - S

(75)

3DL08 - - S

kVAr Rating 200/240V (100) 5.5

382.00

Aux Contacts 3DL08 - - I Included

kVAr Rating 503.00 400/440V 3DL09 - - S 650.00 10.0

Part No 230V Price ÂŁ 3DL08 - - F 1,126.00 50/60 Hz Coil 1,099.00 3DL09 - - F 1,460.00 CO496 ÂŁ40.20 1,367.00 3DL10 - - F 1,632.00 CO49 ÂŁ40.20 1,524.00 3DL11 - - F 1,811.00 ÂŁ43.10 CO49 1,647.00 2,158.00 ÂŁ43.10 CO4993DL12 - - F CO500 ÂŁ47.80 For Direct-on-Line Starters above 132kW â&#x20AC;&#x201C; P.O.A. CO501 ÂŁ47.80 CO502 ÂŁ65.10 CO503 ÂŁ65.10 CO504 ÂŁ70.30 CO505 ÂŁ70.30 769.00

3DL09 - - I

1 x N/O & 1 x N/C CC10K11 3DL10 - - S 919.00 3DL10 -- I 2 x N/C CC10K02 90 (125) 200 110 (150) 3DL11 - - S 975.00 3DL11 - - I 1 x N/O & 1 x N/C CC12K11 6.7 12.5 220 3DL12 - - S 1,044.00 3DL12 -- I CC12K02132 (175) 2 x N/C 8.5 16.7 CC16K11 1 x N/O & 1 x N/C Up to 18 amps - Deduct: ÂŁ29.40 Where a starter is required without overload, deduct CC16K02 2 x N/C 18 to 25 amps - Deduct: ÂŁ32.10 the appropriate overload price as follows: 1 x N/O & 1 x N/C 10.0 20.0 CC20K11 2 x N/C CC20K02 15.0 25.0 CC25K11 1 x N/O & 1 x N/C CC25K02 2 x N/C 180

CC33K12 CC40K12 CC60K12

20.0 25.0 40.0

33.3 40.0 60.0

1 x N/O & 2 x N/C 1 x N/O & 2 x N/C 1 x N/O & 2 x N/C

CO506 CO507 CO508

ÂŁ140.60 ÂŁ146.80 ÂŁ185.20

Part No.

Price ÂŁ

â&#x20AC;˘ Price includes 230V Coil - other coils on request

Add-On Auxilliary Contact Blocks Add On Contacts

Type

Description

CBS11

Only side mounting possible

1 x N/O & 1 x N/C CB048 Pressed Steel Enclosure Dimensions 2 x N/C CB047

Note: Highlighted Enclosures areOnly Crompton pressed steel with removable CBS20 sideControls mounting possible lids. All others have Hinged doors with dimensions available on request

Ref

Size 2

184 x 184 x 149

140 x 140

184 x 284 x 149

140 x 240

305 x 285 x 159

260 x 240

â&#x20AC;˘ Wye-Delta Connected â&#x20AC;˘ 24V, 48V, 110V, 230V, 400V, 440V others on request â&#x20AC;˘ Provision for remote control

Without Isolator & Mains Fuses With Isolator (Interior Only) (Interior Only) Type Price ÂŁ Price ÂŁ Type Price ÂŁ Price ÂŁ compared to standard DC contactors

11 common (15) 3SD1 - -in S 2 compact 257.00 (223.00) most ratings frames sizes3SD1 - - I 3SD2 S 265.00 (231.00) 3SD2 -- I Coil - Other coil voltages available on request

30 15includes (20) â&#x20AC;˘ Price

x W (mm)

130 x 60

â&#x20AC;˘ WEATHERPROOF IP55 (INTERIORS ONLY: IP00) â&#x20AC;˘ Three Phase â&#x20AC;˘ Surface Mounting Type: 3SD â&#x20AC;˘ Standard Coil Voltages: 50/60Hz â&#x20AC;˘ Built in Start/Stop Reset Push buttons â&#x20AC;˘ Hand reset thermal overloads

21 â&#x20AC;˘3

174 x 104 x 134

Size 4

Max FLC 415V Approx. 3ph kW (hp) â&#x20AC;˘ Reduced height

W x D (mm)

Size 1

NEW Low Height DC Contactors up to 25A Size 3 Star-Delta

ÂŁ10.10

Fixings 4 x 4.5mm Diameter ÂŁ10.10

With Isolator & Fuses

(Interior Only) Price ÂŁ Price ÂŁ

Type

307.00 (274.00)

3SD1

-- F

345.00

(313.00)

313.00 (283.00)

3SD2

-- F

365.00

(320.00) (555.00)

(30)

3SD3 - - S

309.00

(274.00)

3SD3

-- I

427.00 (387.00)

3SD3

-- F

578.00

(40)

3SD4 - - S

400.00

(365.00)

3SD4

-- I

576.00 (540.00)

3SD04 - - F

674.00

(633.00)

(50)

3SDA5 - - S

510.00

(475.00)

3SDA5 - - I

682.00 (646.00)

3SDA5 - - F

862.00

(822.00)

(666.00)

3SD05 - - F

886.00

(846.00)

(75)

3SD06 - - S

703.00

(660.00)

3SD06 - - I

1,021.00 (990.00)

3SD06 - - F

160 90 (125) CCPC09-24

3SD08 9 -- S

941.00

250

3-pole AC Switching Contactors with 24V DC coils 45 (60) 3SD05 - - S 533.00 (494.00) 3SD05 - - I 705.00

85 98

138Type75

AC3 Rating AC1 Rating (A) 3SD07 - - S(A) 858.00

(100)

3SD09 12 - - S

208 110 (150) CCPC12-24

1,135.00

3SD10 - - S

1,744.00

310

185

(250)

3SD10 - - S

1,744.00

346

200

(287)

3SD11 - - S

1,811.00

150 (175) CCPC25-24

25 25 40

Contacts 3SD07 - Aux - I 1,204.00

3SD08 -None - I 1,466.00 Included* 3SD09 -None - I 1,681.00 Included* 3SD10 - - I

None3,002.00 Included*

3SD10 - - I

3,002.00

3SD11 - - I

3,103.00

-- I

3,157.00

*Add On Auxiliary Contact Blocks 220 (300) 3SD12 - - S 1,922.00 3SD12 See 3-pole AC Contactors & Accessories on page 20

380

Where a starter is required without overload, deduct the appropriate overload price as follows: Up to 30 amps - Deduct: ÂŁ29.40 31 to 43 amps - Deduct: ÂŁ32.10

For Star Delta Starters above 220kW and Interiors only above 55kW â&#x20AC;&#x201C; P.O.A.

1,208.00 (1,175.00)

Part No. 3SD07 - - F 1,563.00 3SD08 - - F CO509

1,823.00

3SD09 - - F 2,025.00 CO510 3SD10 - - F 3,680.00 CO511 3SD10 - - F

3,680.00

3SD11 - - F

3,845.00

3SD12 - - F

4,011.00

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

ÂŁ31.70 ÂŁ34.60 ÂŁ74.40

For high inertia/long run up times please refer to our design engineers.

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras TM

Price ÂŁ

sales@cromptoncontrols.co.uk

Enclosed Contactors for Heating & Lighting load Control - IP55

Single Pole & Neutral

Triple Pole & Neutral

Order Current AC1 Approximate Dimensions (mm) Reference Rating (kW at 240V) H x W x D

Price £

Current AC1 Approximate Dimensions (mm) Order Reference Rating (kW at 240V) H x W x D

Price £

3HS1S 3HS3S

60A

184

149

£62.20

3HT1S

25A

184

149

£54.80

100A

40A

184

149

£75.00

159 200

3HT3S

180A

285 300

£120.80

3HS5S

305 300

£255.00

3HT5S

72A

305

285

3HS6S

275A

300

200

£333.00

3HT6S

110A

135A

32.4

285 300

159 £188.00 159 £304.00

3TEH13

305 300

200 £418.00

3TEH15

150A

600

400

200 £487.00

3TEH18

180A

43.2

3TEH22

220A

52.8

600 600

400 400

200 £521.00 200 £719.00

Extras (Types 3HS & 3HT only) 2 pole aux’ contact block £7.90 4 pole aux’ contact block £12.90 Enclosed 4-Pole Contactors available on request.

SERIES 3000 Enclosures Plain lid Epoxy Paint Finish. Colour RAL 7035 Dimensions (mm) Reference 3EBS21 3EBS22 3EBS23 3EBS24

IP55 IP55 IP55 IP55

174 184 184 305

104 184 284 285

Price £

Description

134 149 149 159

Size Size Size Size

1 2 3 4

enclosure enclosure enclosure enclosure

DIN Rail fitted accepting CC09/CC12/CC18 or CC25 contactor chassis fitted accepting 2 x CC25 chassis fitted accepting component combinations chassis fitted accepting component combinations

£24.70 £36.10 £38.70 £44.50

IP55 enclosure: Sheet steel

3-Pole AC Enclosed Isolators

AC-23A Rated, IP65 Plastic approx. 125H x 100W x 85D (mm) Type

Operational Current

Ref

AC-21A

Operational Power AC-23A 380-440V

Price £

S3AC20

20A

5.5kW

£24.80

S3AC25

25A

7.5kW

£26.40

S3AC32

32A

11kW

£27.30

2-Pole True DC Enclosed Switches for single string Solar PV application

DC-21B Rated, IP65 Plastic approx. 180H x 98W x 107D (mm) Type

Operational Current DC21B

Price £

2DC12

12A @ 700VDC

£42.40

2DC16

16A @ 700VDC

£52.70

2DC25

25A @ 600VDC

£56.70

2DC32

32A @ 600VDC

£74.50

Ref

4-pole double string plus other current & voltage ratings available.

www.cromptoncontrols.co.uk

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Enclosed Contactors/Boxes/Isolators

• Supplied with 220/240V 50Hz coils as standard. • All units are designed for two wire control i.e. Time Switch, Thermostat, Sensor or other remote controls • Optional On/Off switch, Local/Remote Switch, Indicator Lamps and Control Fuses

Control Components

NEW 22.5mm Control & Signaling Devices Comprehensive range of Push Buttons, Indicators Lamps, Key & Selector Switches IP65 Chrome Bezels suitable for panel door and enclosed control station mounting. Available as individual items for flexible stocking & assembly • • • • •

Each Push Button & Switch requires a coupler & Contact Block/s Lamp Holder PB041C requires a coloured Lens & a separate bulb Transformer & Resistor Lamps require a coloured Lens and include a Bulb LED Lamps PB094C, PB095C, PB096C & PB097C require a same colour Lens & include Bulb New LED Lamps PB105C to PB111C are one piece including Lens & Bulb

Push Buttons Part No. PB013C PB016C PB017C PB018C PB019C PB020C PB021C PB048C PB054C PB055C PB077C PB078C PB088C PB089C PB090C

Start Button + Coupler + 1 x NO Contact Price £ £4.40 £11.10 £5.10 £4.40 £7.50 £12.20 £8.20 £17.80 £4.40 £4.40 £5.00 £5.00 £10.40 £5.60 £6.30

Description Push Button Green Chrome Collar Push Button Reset Actuator Blue Push Button Protruding Red Chrome Collar Push Button Flush Red Chrome Collar Push Button Red Mushroom Head Push Button Red Latching Mushroom Head - Pull to Release Push Button Double (Vertical) with Legend (IP40 only) Push Button Red Latching Mushroom Head (Key Release) Push Button Black Chrome Collar Push Button Blue Chrome Collar Illuminated Push Button Flush Green Illuminated Push Button Protruding Red Push Button Red Emergency Stop - Twist to Release Push Button Green Chrome Collar with Legend (I) Push Button Red Protruding Chrome Collar with Legend (0)

Order Coupler & Contact Block Separately

Key Operated Switches Part No. PB028C PB029C PB030C PB031C PB032C

Description 2 Position Switch 3 Position Switch 2 Position Switch 2 Position Switch 3 Position Switch

Key Removal Position Non Latching (1x45 deg) Left Non Latching (2x45 deg) Centre Left & Right Latching (1x90 deg) Latching (1x90 deg) Left Latching (2x90 deg) Centre

Price £ £14.00 £14.00 £13.10 £13.10 £13.10

3-Way Key Switch + Coupler + 1 x NO Contact + 2 x NC Contacts

Order Coupler & Contact Block Separately Spare keys £4.20 each (DO021C). To suit above switches only.

Selector Switches Part No. PB033C PB034C PB035C PB036C

Description 2 Position Selector 3 Position Selector 3 Position Selector 2 Position Selector

Switch Switch Switch Switch

Non Latching (1x45 deg) Spring Return Non Latching (2x45 deg) Spring Return Latching (2x60 deg) Stay Put Latching (1x90 deg) Stay Put

Price £ £6.00 £6.00 £5.00 £5.00

Order Coupler & Contact Block Separately

Contact Blocks Part No. PB039C PB040C

Description N/O Contact Green N/C Contact Red

Coupler - Required for ALL Buttons & Switches

Price £ £4.20 £4.20

Part No. PB093C

Price £ £0.80

Description Coupler

Late break/Early Make contacts available on request. Blue Lens + Resistor Lamp with integral coupler + 130V Bulb

Indicator Lamps Part No. PB041C PB043C PB015C PB014C PB094C PB095C PB096C PB097C

Price £ £5.10 £6.40 £6.40 £15.20 £7.00 £7.00 £7.00 £7.00

Description Lamp Holder 130V 1.2W Max no bulb * Resistor Lamp 230/130V 2.6W inc bulb Resistor Diode Lamp 230/130V 2.6W inc bulb Transformer Lamp 110/6V 2.6W inc bulb LED Lamp White 110V integral bulb LED Lamp Green 110V integral bulb LED Lamp Yellow 110V integral bulb LED Lamp Red 110V integral bulb

Lens and head required extra from lens colour options below Spare BA9S Bulbs: 24V (BU004) £2.20 60V (BU010) £3.00 130V (BU009) £2.20 Part No. PB103C PB104C

Description Lamp Holder for Illuminated Push Button 130V 1.2W max no bulb Resistor Lamp for Illuminated Push Button 230/130V 1.2W inc bulb

Coloured Lens Head & Body Part No. PB022C PB023C PB024C

Description Pilot Light Lens Green Pilot Light Lens Yellow Pilot Light Lens Red

Price £ £3.30 £3.30 £3.30

Order lampholders separately

www.cromptoncontrols.co.uk

Tel:

Price £ £6.20 £7.40

Part No. PB025C PB026C

Description Pilot Light Lens White Pilot Light Lens Blue

Price £ £3.30 £3.30

Order lampholders separately

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

New One Piece LED Pilot Lights - 230V AC

Price £ £8.10 £8.10 £8.10 £8.10 £8.10 £8.10 • Single • Colour RAL7035 Light Grey £8.10 Phase or Three Phase • Standard Coil Voltages: 50/60Hz • 24V, 48V, 110V, 230V, 400V, 440V others on request • Built in Forward/Stop Reset/Reverse push buttons • Provision for remote control

Direct-on-Line Reversing

Max FLC (415V 3ph)

Approx. kW

(hp)

Without Isolator

With Isolator

Type

Price £

Type

Price £

3DR1 - - I

196.90

3DR1 - - F

268.00

3DR2 - - I

201.00

3DR2 - - F

272.00

264.00

3DR3 - - F

427.00

328.00

3DR4 - - F

490.00

Price £

12 5.5 (7.5) 3DR1 - - S 131.20 Empty Push Button Stations - IP65 Plastic 18

7.5

3DR2 - - S

(10)

134.70

Dimensions (mm) (15) 3DR3 - - S 3DR3 202.00 H x W x D Par t No.25Description11 Price -£- I PB046C 32Emergency15 Stop (20) Station 1 Unit Yellow Lid 74 68 51 £14.80 3DR4 - - S 291.00 3DR4 -- I £2.70 PB049C Yellow P/B Plate Emergency Stop PB050C Station for 1 Unit £16.20 74 68 51 Not available as 480/1/50 Available as Up/Stop/Down PB051C Station for 2 Units 104 68 51 £18.40 For Reversing Starters above 15kW – P.O.A. plus other text combinations on request 134 68 51 £26.90 PB052C Station for 3 Units PB053C Station for 4 Units 164 68 51 £30.70 NP007 Blank Legend Plates supplied Loose £1.50 Engraved Legend Plates - Max 24 Characters: special Price per plate for 1 to 10 plates £4.10 special Price per plate for 11 or more plates P.O.A.

With Isolator & Fuses

Conveyors

Pre-Assembled Push Button Stations - IP65 Plastic 1 Station Price £ 2 Station Price £ 3 Station Price £ Start Start-Stop Forward/Stop/Reverse £66.20 £27.60 £43.40 Roller Doors PBS1 START-C PBS2 SS-C PBS3 FSR-C Stop Start/Stop/Inch Start/Mushroom Stop £28.10 £55.30 £66.20 PBS1 STOP-C PBS3 SSI-C PBS2 SSM-C Mushroom Stop Up-Down Forward/Mushroom Stop/Reverse £31.80 £43.10 £68.30 PBS1 STOPM-C PBS2 UD-C PBS3 FSSIM-C Emergency Stop Start/Mushroom Stop/Inch £29.30 £66.50 PBS1 ES-C PBS3 SSIM-C Start/Stop/Potentiometer • WEATHERPROOF IP55 • Three Phase • Colour RAL7035 Light Grey £96.80 • Surface Mounting Type: 3DW • Standard Coil Voltages: 50/60Hz • 24V, 48V,PBS3 110V,SSP-C 230V, 400V, 440V others on request • Sheet steel enclosure with built in High/Stop Reset/Low push buttons • Hand reset thermal overloads • Provision for remote control

Two speed dual wound

Max FLC Approx. Electronic Timers (415V 3ph)

Without Isolator Type

(hp)

Standard 12Timer:

5.5

(7.5)

FUNCTION18

7.5

(10)

With Isolator Price £

Type 3DW1 – – – I

223.00

3DW2 – – – S Delay on energisation.

3DW2 – – – I

235.00

188.20

OPERATION

On application of the desired supply voltage the relay operates after the

TIME RANGES AVAILABLE

30 secs – TM30S

1 mins – TM1M

2 mins – TM2M

4 mins – TM4M

8 mins – TM8M

16 mins – TM16M

For Two Speed Dual Wound Starters above 7.5kW – P.O.A.

required for high & low speeds. set delayFLC period.

20 mins – TM20M Two speed pole change

Price £5 • WEATHERPROOF IP55 • 3.50 Three Phase • Surface Mounting Type: 3PC • Standard Coil Voltages: 50/60Hz • Sheet steel enclosure with built in High/Stop Reset/ Low push buttons

Fans

Type YD. Voltages: 110V, 220/240V, 380/440V Without Isolator

With Isolator

(415V 3ph) FUNCTION

Type Price £ Double relay timer for Star Delta starting.

Type

OPERATION 12

5.5

18 25

7.5 11

Pumps

Machine Tools

• Colour RAL7035 Light Grey • 24V, 48V, 110V, 230V, 400V, 440V others on request • Hand reset thermal overloads • Provision for remote control

Star Delta Timer: Approx. Max FLC (hp)

Price £

Type TM. Voltages: 220/240V, 380/440V 3DW1 – – 110V, –S 175.00

On application of the voltage supply the Star relay operates and 3PC1 – –desired –S 301.00 3PC1 –––I

(7.5)

Price £ 365.00

(10)

releases after the – set– delay After an additional fixed delay period of– I 3PC2 – S period. 312.00 3PC2 ––

385.00

(15)

75ms the Delta relay until341.00 the supply is removed. 3PC3 – –operates –S

439.00

3PC3 – – – I

TIME RANGES AVAILABLE

30 secs – YD30S 1 min – YD1M 2 mins – YD2M Please Note: Overload setting range. High speed Price £64.70 For Two Speed Pole Change Starters above 11kW – P.O.A. overload rated half full load current of motor.

Motor Connection details required.

Single Phase Series Parallel Electronic Protection Units • WEATHERPROOF IP55

• Single Phase

• Capacitor start/capacitor run or Induction run • 100/110V, 220/230V, 480V • Built in Start/Stop Reset push buttons • Hand reset thermal overloads • Provision for remote control FUNCTION Protection against over-temperature damage to motor windings. Max FLC Approx. Without With Isolator Withsupply Isolator & Fuses OPERATION TheIsolator relay energises immediately on application of the desired voltage. If an over-temperature

Thermistor Protection • Surface Mounting Type: Unit: 3SP

(240V 1ph)

(hp)

Type TH• Coil Voltages: (50/60Hz)

Typecondition occurs Price it £ is detected Type Price and £ the relay Type is de-energised, Price £ breaking the control by the thermistor

thus switching off the–supply to362.00 the motor. 24 3.7 (5) 3SP1circuit – – S and 257.00 3SP1 –I 3SP1 – – F 405.00 TYPES 32 AVAILABLE 5.5 voltage 110V, 220/240V TH415 – supply voltage Grain (7.5) 3SP2TH110 – – S – supply 265.00 3SP2 ––I 376.00 3SP2 – – F220/240V, 441.00380/440V Drying MANUFACTURED TO BS4999 Part 111:1987 For use in conjunction with PTC Thermistors as specified in the same British Standard Fans For motor frame sizes D160/180 & Electrodrives Please Note: Overload setting range. Overload rated Price £53.50 motors – P.O.A.

half full load current of motor. For Single Phase Series Parallel Starters above 5.5kW – P.O.A.

Refer to Page 23 for a Complete List of Standard Starter Codes & Optional Extras

www.cromptoncontrols.co.uk

Irrigation Pumps

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Control Components

Standard Starters

Part No. Description PB105C Compact LED White PB106C Compact LED Green PB107C Compact LED Red PB108C Compact LED Amber PB109C Compact LED Blue PB110C Compact LED Clear • WEATHERPROOF PB111C CompactIP55 LED Yellow • Surface Mounting Type: 3DR Other voltages available • Sheet steel enclosure on request • Hand reset thermal overloads

Stockist Display Stands - For the serious stockist

Point Of Sale Displays

With your first order •

FREE Stand on orders over £4,000 Net Orders under £4,000, Stand Cost £450 Net

• Select

from our recommended stock profile or choose your own

• Slat

wall hangers & shelves also available on request

Please ask about our Introductory Stock Profiles or for guidance selecting the most appropriate profile to suit your customer and prospect base Why not add a Spoola or two…? Spoola is a unique cable carrier expertly designed by Electricians and Data cable installers for onsite work. Spoola not only carries the reels it also act as a secure dispenser when on site. Closed

Open

Length

760mm

Height

380mm

340mm

Width

40mm

340mm

Dimension

Between Arms

At 2.8kg it is sturdy but lightweight and can hold an amazing 50kg of cable reels complete with cables. Cable Tidy Guide Bar

www.cromptoncontrols.co.uk

• Robust steel construction • Light to carry • Folds flat for easy storage • Easy to set up • Holds multiple reels • Acts as third “hand” POA Prices Subject to Quantity

also available on request

610mm

Tel:

+44 (0)1924 368251

sales@cromptoncontrols.co.uk

Recommended Stockist Display Products Recommended Price £ Quantity Each

Description

DOL Starters - Without Overload 3DL1EZS 5.5kW DOL 3DL2EZS 7.5kW DOL 3DL3EZS 11.0kW DOL

5 3 1

Star Delta Starters - Without Overload 3SD1EZS 11kW SD 3SD2EZS 15kW SD

1 £233.70 1 £242.70

DC Brake Starters - With Overload 3DCM1EJS 3.0kW Max 3DCM1ELS 5.5kW Max BR011 Brake Module

2 £417.00 1 £446.00 1 £208.00

Point Of Sale Displays

Part No.

£37.60 £51.50 £55.30

DOL Reversing Starters - Without Overload 1 £104.70 3DR1EZS 5.5kW 1 £108.30 3DR2EZS 7.5kW Note 1: All starters are supplied with 400V coil (other voltages are available) Note 2: Larger sizes of all starters, isolators and mains fuses are available upon request Heating & Lighting Controls 3HS1S 60A AC1 Single Pole & Neutral 3HT1S 25A AC1 Three Pole & Neutral

1 1

£62.20 £54.80

Note 3: Larger sizes available. Shaft Power Monitors M20 3ph 380-500V. Up to 999A SS074

1 £409.00

Other versions available Thermister Protection Unit 220/240 - 380/440V TH415 (110V also available)

£53.50

Part No.

Description

This is Crompton Controls

Timer

Recommended Price £ Quantity Each 3

Push Buttons & Empty Housings - 22mm Delay on 0-30sec. 2 £53.50 PB013C Flush Green Chrome Collar Other times also available. Protruding Red Chrome Collar Welcome to the latest edition of Crompton PB017C Controls Catalogue. Three Pole AC Contactors and Accessories PB088C Red Latching E-Stop Twist Release Also Available in Four Poleinvolved up to 1000A AC1 and We with Crompton Controls has been with power have also entered into an exciting new partnership PB039C N/O Block other Coil Voltages control installations since the electrical revolution with Yaskawa during 2010, and Contact are delighted toGreen offer £27.30 CC0910 400Vago. - 12A 1 xproud N/O of our heritage5 over 130 years We/are their outstanding range of AC Drives. PB040C N/CInverter Contact BlockThe Red and position as one of the major suppliers of J1000, V1000, and A1000 Drives leading edge, 3 £27.30 CC0910 230V - 12A PB046C E-Stopoffer Station 1 Way Yellow Lid Specialist Control next generation products to rival anything on the 5 £28.70 CC1210 400V -Solutions. 18A PB051C Station 2 Way Grey Lid market today, and incorporate many special features to 3 £28.70 CC1210 230V - 18A PB023C Pilot Light Lens (see Yellow meet the widest of application requirements pages 2 £37.70 CC1810 400V - 25A We have a system for every kind of motor control 13 to 16). PB024C Pilot Light Lens Red £37.70 CC1810 230V 25A 2 application, and are able to utilise our many years of PB022C Pilot Light Lens Green £55.80 CC2510 - 32A experience 400V to provide innovative packages that 2 2 £55.80 CC2510 - 32A PB041C Lamp Holder 415V 2.6W max incorporate230V the very latest technology. Energy saving CC3210 400V - 40A is a particular focus and can provide quick returns2on £72.40 investment.230V - 40A 2 £72.40 CC3210 BU004 Spare Bulbs 24V CC4011 2 £99.30 400V - 50A / 1 x N/O, 1 x N/C BU010 Spare Bulbs 60V CC4011 230V - 50A / 1 x N/O, 1 x N/C 2 £99.30 We are pleased to introduce our brand new Series BU009 Spare Bulbs 130V CC5011 400V - 65A / 1 x N/O, 1 x N/C 2 £129.60 3000 range of AC Motor Controllers, the next 2 £129.60 PB093C Coupler CC5011 230V 65A / 1 x N/O, 1 x N/C generation of our market leading Starters and CBF11 £7.90 Contact Block / 1 x N/O,2000. 1 x N/C replacing the well established Series Series3 CBF22 Contactour Block 2 xRange N/O, 2 x N/C 3 £12.90 3000 incorporates new/ CC Contactors, Complete Push Button Stations Mech Interlock to fit developed 9A to 32 from the Thermal Overloads & Accessories PBS1 START-C 1 Way Start CML09-32 2 £5.90 latest engineering techniques available in Contactors PBS1 ES-C 1 Way Emergency Stop manufacturing today. This enhanced IP55 all steel Mech Interlock to fit 40A to 65 PBS2 SS-C 2 Way Start/Stop CML40-65 2 £8.80 constructedContactors range conforms to all International FSR-Cby our3outstanding Way - Forward/Stop/Reverse All the above PBS3 is supported customer design, manufacturing and quality standards. The use Mech Interlock to fit 80A CML80 2 £8.80 service and technical support. We pride ourselves on of improvedContactors materials results in a longer product life TM30S

expectancy, wider

Contactor Coils range of outputs Coil to fit 9A to 18A Contactors CX09-18 and a better aesthetic design CX25-32 Coil to fit 25A to 32A Contactors enhancing your CX40-80 Coil to fit 40A to 80A Contactors

products appearance. In short the Series 3000

3 2 1

Thermal Overload Relays incorporates everything we have learnt about starters from many 2.5A years-of4A experience to give you even more CR09/4 3 for your money! CR09/6 4A - 6A 3 CR09/8 5.5A - 8A 3 CR09/10 7A - 10A 3 CR12/13 10A - 13A 3 CR16/18 13A - 18A 3 www.cromptoncontrols.co.uk

Tel:

our ability to provide products on time and to the Isolators most competitive lead times in the Industry. We strive S3AC20service3to Pole 20A £12.00 to provide a flexible meet the@230vac requirements of our customers, at Crompton Controls the customer S3AC25 3 Pole 25A @230vac £15.30 always comes first. S3AC32 3 Pole 32A @230vac £23.90

V1000 Inverters £30.30 YNE055 + V1000 0.4kW 3.0A Single Phase We are well represented in the UK by our own £30.30 YNE019 + RFI Filter professional team of sales engineers, product £30.30 YNE057 + V1000 1.5kW 8.0A Single Phase engineering personnel and a national Distributor £30.30 YNE022 + RFI you Filter network ensuring that wherever are we can £30.30 YNE035 + V1000 2.2kW 5.5A Three Phase provide support £30.30 YNE010 + RFI Filter just around the

corner! We are here to serve you be it a +44 (0)1924 368251 simple contactor or a complete drive system,

sales@cromptoncontrols.co.uk

£4.40 2 £5.10 2 2 £10.40 £4.20 2 £4.20 2 2 £14.80 2 £18.40 £3.30 2 2 £3.30 2 £3.30 £5.10 6

3 3

£3.00

£2.20

£0.80

1 1 1 1

£27.60

£2.20

£29.30 £43.40 £66.20

2 £24.80 2 £26.40 2 £27.30

1 £246.30 1 £342.90 1 £498.50

Technical Information

2Definition of Degrees of Protection

Catalogue Index

The designation used for the degree of protection consists of the letters IP followed by two numerals signifying conformity with the conditions stated in the table. Designation IP21 IP22

Protection against contact by finger with

Standard Starters electrically live parts inside the enclosure and against solid objects with a diameter greater than 12mm.

IP23 IP31

Protected against ingress of solid objects

with a diameter more than 2.5 mm. Equipment Hazardous Area of

Complete protection against contact with

PUWER Brakes DC Injection live 98 or moving parts. Protectio n against

harmful deposits of dust. Dust does not accumulate in an amount sufficient to impair operation.

IP56 IP65

Controls/Enclosures/Isolators Totally protected against dust.

Shaft Power Monitors A Guide To Typical Currents (amps)

Dripping water falling vertically Dripping 4-6 water falling at an angle up to 15º from the vertical. Water falling as a spray at an angle up to 60º from the vertical.

Drip Proof

Dripping water falling vertically

Enclosed

Water splashing against the machine from any angle shall have no harmful effect

Totally Enclosed

Water projected by a nozzle against the 8-10 mac hine from any angle shall have no harmful effect.

Totally Enclosed or Weather Proof or Dustproof or Hoseproof

Deck Watertight Dust Tight Dust and Watertight

FULL LOAD CURRENT (A)

Motor Power Rating

Single Phase

Variable Speed Drives 110V 220V 240V HP

0.095 0.125 0.150 0.190 0.250 0.375 0.600 0.750 1.1 1.5 1.9 2.2 3 3.7 4.5 5.2 5.6 6 6.7 7.5 9.3 11 15 18.5 22 26 30 34 37.5 45 52.5 56 60 67.5 75

General Description

Water protected against conditions on a ships deck. Water 11projected by a nozzle against the machine from any angle shall have no harmful effect. Water protected against conditions on a ships deck.

IP66

Second Numeral Protection against ingress of water.

Protection against contact with live or moving parts by tools, wires or other objects of a thickness greater than 1mm.

IP44

IP55

First Numeral Protection against contact and against ingress of solid objects.

1/8

2.69 3.38 3.91 4.66 5.80 7.77 10.4 13.2 19.2 25.4 31.5 37.3 48.3 59.2 69.4 79.6 84.4 89.0 99.0 109.0

1/6 1/5

/ Control Panels / 1 4 1 3 1/2

3/4 1 11/2 2 21/2 3 4 5 6 7 71/2 8 9 10 121/2 15 20 25 30 35 40 45 50 60 70 75 80 90 100

1.34 1.69 1.96 2.32 2.9 3.88 5.2 6.59 9.6 12.7 15.7 18.6 24.3 29.6 34.7 39.8 42.2 44.5 49.5 54.4

1.23 1.55 1.79 2.13 2.68 3.56 4.77 6.04 8.8 11.7 14.4 17.1 22.2 27.1 31.8 36.5 38.7 40.8 45.4 50.0

Contactors and Overloads Electronic Components

Stockist Display Package

Definition of IP Protection Guide to Motor Currents

13-15346V

220V 0.751 0.935 1.06 1.24 1.50 1.98 2.72 3.36 4.75 6.12 7.5 8.83 11.5 14.2 16.9 19.5 20.8 22.1 24.6 27.3 33.8 40.1 53 65.6 78.1 90.6 103 116 128 153 177 189 202 227 251

240V

0.689 0.855 0.971 1.14 1.37 1.82 2.5 3.09 4.35 5.61 6.88 8.1 10.6 13 15.4 17.9 19.1 20.2 22.6 25 31 36.8 48.5 60.1 71.5 83.1 94.5 106 117 140 163 174 185 208 230

Extras For Motor Starter Codes Starters Description Small ammeter to 40A Ammeter under 70A Ammeter above 70A FLC Volt Meter Control Transformer Anti Condensation Heater Anti Condensation Heater Neon Indicator Filament Lamp

Enclosure Pressed All types All types All types Pressed Pressed Hinged Pressed All Types

Extras for motor starters

www.cromptoncontrols.co.uk

16/17 18/19 20 21

22 22

0.435 0.541 0.614 0.718 0.87 1.15 1.58 1.95 2.75 3.55 4.34 5.11 6.66 8.22 9.75 11.3 12 12.8 14.3 15.8 19.6 23.3 30.7 38 45.1 52.5 59.6 67 74.1 88.4 103 110 117 131 145

415V

440V

0.398 0.495 0.562 0.657 0.795 1.05 1.44 1.78 2.51 3.24 3.97 4.68 6.1 7.54 8.92 10.4 11 11.7 13.1 14.5 17.9 21.3 28 34.8 41.3 48 54.6 61.3 67.9 80.9 94 100 107 120 133

0.376 0.466 0.53 0.62 0.75 0.99 1.36 1.68 2.37 3.06 3.75 4.42 5.77 7.1 8.41 9.75 10.4 11 12.3 13.7 16.9 20.1 26.5 32.8 39 45.3 51.5 57.9 64 76.3 88.5 94.6 101 113 125

500V

550V

0.331 0.411 0.466 0.545 0.66 0.871 1.20 1.48 2.09 2.7 3.3 3.88 5.07 6.25 7.40 8.59 9.15 9.7 10.8 12 14.9 17.7 23.3 28.9 34.4 39.9 45.3 50.9 56.4 67.1 77.9 83.4 88.5 99.8 110

0.3 0.372 0.424 0.495 0.6 0.792 1.09 1.34 1.9 2.45 3 3.53 4.61 5.69 6.73 7.8 8.31 8.81 9.84 10.9 13.5 16.1 21.2 26.3 31.2 36.3 41.2 48.3 51.2 61 70.9 75.7 80.5 90.7 100

23 Price £ £73.40 £93.60 £135.10 £93.60 £85.80 £16.20 £36.40 £17.20 £39.20

Location Map/Carriage Charges TM

0.478 0.593 0.675 0.788 0.955 1.26 1.73 2.14 3.02 3.89 4.76 5.61 7.32 9.04 10.7 12.4 13.2 14 15.7 17.4 21.5 25.5 33.7 41.7 49.6 57.6 65.5 73.5 81.3 97 113 120 128 144 159

Three Phase 380V

Tel:

Description Mushroom Head Stop Latching Stop/Lock Thermistor Unit in place of Thermal Overload Hand/Off/Auto Switch Hours Run Meter External Overload Reset Chassis Interiors Only Emergency Stop Button

+44 (0)1924 368251

Enclosure Pressed All Types

Price £ £5.80 £24.40

Pressed Pressed All types Hinged All types All Types

£53.50 £25.20 £72.10 £36.50 P.O.A. £24.40

sales@cromptoncontrols.co.uk

31 1

We have a system for every kind of motor control application, and are able to utilise our many years of experience to provide innovative packages that incorporate the very latest technology. Energy saving is a particular focus and can provide quick returns on investment.

Crompton Controls has been involved with power control installations since the electrical revolution over 130 years ago. We are proud of our heritage and position as one of the major suppliers of Specialist Control Solutions.

All the above is supported by our outstanding customer service and technical support. We pride ourselves on our ability to provide products on time and to the most competitive lead times in the Industry. We strive to provide a flexible service to meet the requirements of our customers, at Crompton Controls the customer always comes first. & Current S.D kW A 11 21 15 30 22 43 30 55 37 69 45 85 55 98 75 138 90 160 110 208 150 250 200 346 220 380

We are well represented in the UK by our own professional team of sales engineers, product engineering personnel and a national Distributor network ensuring that wherever you are we can provide support just around the corner! We are here to serve you be it a simple contactor or a complete drive system,

Main Contactor

Maximum Power D.O.L kW A CC09 5.5 12 CC12 7.5 18 CC18 11.0 25 CC25 15.0 32 CC32 18.5 40 CC40 26.0 50 CC50 30.0 55 CC65 37.0 80 CC80 55.0 100 CCM150 75.0 140 CCM180 90.0 180 CCM250 110.0 200 CCM250 132.0 220

We have also entered into an exciting new partnership with Yaskawa during 2010, and are delighted to offer their outstanding range of AC Inverter Drives. The J1000, V1000, and A1000 Drives offer leading edge, next generation products to rival anything on the market today, and incorporate many special features to meet the widest of application requirements (see pages 13 to 16). (amps)

380V

415V

Starter Style

2.7 - 4.3A 4.3 - 6.9A 6.9 - 10.4A 9.5 - 13.8A 12 - 17A 17 - 22A 22 - 31A 31 - 43A 39 - 55A 48 - 69A

Overload Relay CR09/0.25 CR09/0.4 CR09/0.63 CR09/1 CR09/1.6 CR09/2.5 CR09/4 CR09/6 CR09/8 CR09/10 CR12/13 CR16/18 CR25/25 CR32/32 CR32/40

Fits Contactor CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC09 to CC32 CC25 to CC32 CC25 to CC32

Star Delta

D.O.L. 0.16 - 0.25A 0.25 - 0.4A 0.4 - 0.63A 0.63 - 1.0A 1.0 - 1.6A 1.6 - 2.5A 2-5 - 4.0A 4.0 - 6A 5.5 - 8A 7.0 - 10A 10 - 13A 13 - 18A 18 - 25A 23 - 32A 28 - 40A

CC40 CC40 CC40 CC40 CC40 CC40 CC40

CC65 CC65 CC65 CC65 CC65 CC80 CC80

CR40/32 CR40/40 CR63/50 CR63/57 CR63/66 CRA80/80 CRA80/93

23 30 38 48 57 63 80

to to to to to to to

39 - 55A 51 - 69A 65 - 86A 83 - 98A 98 - 114A 109 - 138A 138 - 161A R S T U V W P

Thermistor Protection Without Overload Fitted (Wired for loose O/L to be fitted) Higher Thermal Overload Ranges available on request

Y Z

32A 40A 50A 57A 66A 80A 93A

Overload Range

Note Different Ratings for Direct-On-Line & Star-Delta

Overload Range to cover Motor Full Load Current

Code X A B D E F G H J K L M N C Q

Welcome to the latest edition of Crompton Controls Catalogue.

3SD3ENI/04

240V 1.23 1.55 1.79 2.13 2.68 3.56 4.77 6.04 8.8 11.7 14.4 17.1 22.2 27.1 31.8 36.5 38.7 40.8 45.4 50.0

0.398 0.495 0.562 0.657 0.795 1.05 1.44 1.78 2.51 3.24 3.97 4.68 6.1 7.54 8.92 10.4 11 11.7 13.1 14.5 17.9 21.3 28 34.8 41.3 48 54.6 61.3 67.9 80.9 94 100 107 120 133

Extras

Example Starter Code: A22kW Star Delta starter 400V, 3ph, 50Hz, complete with Isolator, Ammeter and Thermal Overload range 31-43 amps is:

Method of Starting

Contactor Size to cover motor Power (kW's) and Full Load Current (AMPS)

Note Different Ratings for Direct-On-Line & Star-Delta

Control Circuit Voltage & frequency (Hz)

220V 1.34 1.69 1.96 2.32 2.9 3.88 5.2 6.59 9.6 12.7 15.7 18.6 24.3 29.6 34.7 39.8 42.2 44.5 49.5 54.4

0.435 0.541 0.614 0.718 0.87 1.15 1.58 1.95 2.75 3.55 4.34 5.11 6.66 8.22 9.75 11.3 12 12.8 14.3 15.8 19.6 23.3 30.7 38 45.1 52.5 59.6 67 74.1 88.4 103 110 117 131 145

Full Load Current (A) Single Phase Three Phase

Typical Motor Currents

Motor Power Rating kW 0.095 0.125 0.150 ¼ 0.190 0.250 ½ 0.375 ¾ 0.600 0.750 1 1.1 1½ 1.5 2 1.9 2½ 2.2 3 3 4 3.7 5 4.5 6 5.2 7 5.6 7½ 6 8 6.7 9 7.5 10 12½ 9.3 15 11 20 15 18.5 25 30 22 35 26 40 30 45 34 37.5 50 60 45 52.5 70 75 56 60 80 67.5 90 75 100

This is Crompton Controls

Voltage 277 208 600

Getting Started - How To Code a Standard Starter...

We are pleased to introduce our brand new Series 3000 range of AC Motor Controllers, the next generation of our market leading Starters and replacing the well established Series 2000. Series 3000 incorporates our new CC Range Contactors, Thermal Overloads & Accessories developed from the latest engineering techniques available in manufacturing today. This enhanced IP55 all steel constructed range conforms to all International design, manufacturing and quality standards. The use of improved materials results in a longer product life expectancy, wider range of outputs and a better aesthetic design enhancing your products appearance. In short the Series 3000 incorporates everything we have learnt about starters from many years of experience to give you even more for your money!

Direct-on-Line (D.O.L) Direct-on-Line Reversing Star-Delta (S.D.) Dual Wound Pole Change Series Parallel Duty Standby Fan Shaker Enclosures only 3 Phase DOL DC Brake 1 Phase DOL DC Brake Star Delta DC Brake Spinguard ATEX Direct-on-Line ATEX Star-Delta

Starter Type

Starter Codes

Code 3DL 3DR 3SD 3DW 3PC 3SP 3DS 3FS 3EBS 3DC 3DP 3DY 3SG 3DLF 3SDF

Code 1 2 3 4 A5 5(05 for 3SD) 6(06 for 3SD) 07 08 09 10 11 12

Special M P U

60Hz Only

3 Contactor Coil Voltage & Hz

Dual 50 /60Hz Standard Voltage A 110 C 230 D 24 E 400 F 440 I 48 Special Voltage B 120 X 380 R 220 S 480 Q 240 W 575 Y 415

6 Extra Features Suffix Codes

Variations

Code 01 Stop/Reset Only 02 Press to Run 03 Hand/Off/Auto Selector 04 Ammeter 05 Separate Control Circuit 06 Control Transformer 07 Line to Neutral Control 08 Motor Running Lamp 09 Anti-Condensation Heater 10 Single Phase Mains Wiring 11 Single Phase & Stop Reset 12 Single Phase & Press to Run 13 Single Phase & Hand/Off/Auto 14 Single Phase & Ammeter 15 Single Phase & Separate Control Circuit 16 Single Phase & Control Transformer 17 Single Phase & Motor Run Lamp 18 Single Phase & Anti-Condensation Heater

Code Starter Version S Standard I With Isolator F With Isolator and Mains Fuses / Switch Fuse* With Mains Fuses Plastic Enclosure Un-enclosed (Interior only)

L P U

* Hinged Door Enclosures Switch Fuse Fitted

Crompton Controls

+44 (0)1924 368251 +44 (0)1924 367274

Monckton Road, Wakefield, West Yorkshire WF2 7AL. UK

Tel: Fax:

www.cromptoncontrols.co.uk E-mail: sales@cromptoncontrols.co.uk

Ammeter

You Are Welcome To Visit Us

LEEDS & M62 M1 Junction 40

DE W

SB U

A61 LEEDS

Main Line Station

From Wakefield: Take A636 (Denby Dale Road/signed for M1 Motorway), out of Wakefield for approximately 1 1 / 2 mile. Take first right after railway bridge into Monckton Road Industrial Estate. Crompton Controls is about 1/3 mile on left hand side.

RY WAKEFIELD

Crompton

DONCASTER A638

A636

controls

From all other locations via M1/M62:

MONCKTON ROAD INDUSTRIAL ESTATE Calder Island

Leave M1 at Exit 39 and follow A636 (Denby Dale Road) towards Wakefield for approximately 11/2 mile, just after crossing river and canal, turn left into Monckton Road Industrial Estate. The factory is about 1/3 mile on left hand side.

Hotel

A642 HUDDERSFIELD

ASDA

A61 BARNSLEY

M1 Junction 39 SHEFFIELD & LONDON

DENBY DALE A636

Conditions of Sale Goods are sold subject to our Standard Conditions of Sale appropriate to the particular goods (available on request). Orders under £175.00 List are net of discount. Delivery Charges up to 20kg Standard 1 to 2 Day Carrier under £50 List order value £9.00 net Standard 1 to 2 Day Carrier over £50 List order value £15.00 net Next day, up to 5.00pm

£21.50 net

Next day, up to 12.00 noon

Next day, up to 10am

£31.50 net

Saturday am

Items under 1kg via mail

£6.50 net

£26.50 net £39.50 net

£110 net per pallet

Items over 20kg

Ireland, Scottish Highlands and Channel Islands £26.50 net up to 3 days transit - no next day service We can arrange special delivery via couriers etc. at customers request. Note: Delivery charges for larger Inverters, Soft Starters, ATEX & Special Panels - P.O.A. All prices are subject to VAT at the appropriate rate.

TM TM

solar Your Specialist in Control Solutions Monckton Road, Wakefield, West Yorkshire WF2 7AL UK www.cromptoncontrols.co.uk facebook.com/CromptonControls

Tel:

+44 (0)1924 368251

Fax:

linkedin.com/company/crompton-controls

01924 367274 @CromptonControl

sales@cromptoncontrols.co.uk youtube.com/user/CromptonControlsUK

All information contained in this publication is, as far as possible, correct at the time of publication. However, due to our policy of continued improvement, we reserve the right to alter specifications and prices without prior notice. © 2015 Crompton Controls. All rights reserved. Printed in England. Printed on FSC certified paper. BS EN ISO 9001:2008 FM565231