Allred by Crysteel Truck Equipment

800-722-0588 Lake Crystal (Southern MN) 507-726-6041

800-795-1280 Fridley (MPLS/St. Paul) 763-571-1902

INDEX

SUPPLIER............................................PAGE SUPPLIER...........................................PAGE Access Covers/SnowSport Snowplows ........... 73 Aftermarket Back Drags .................................... 75 AstroStart Remote Starters ............................... 76 BackRack ............................................................ 88 Better Built Toolboxes/Transfer Tanks ............. 91 Boss Plows .................................................... 2 - 17 Buyers Lights .............................................. 86 - 87 Buyers Plows ............................................... 28 - 38 Buyers Salt and Sand Spreaders................ 38 - 45 Buyers S.A.M. Aftermarket Plow Parts ...... 62 - 71 Buyers Dump Body Vibrators ........................... 89 Cougar Dump Body Vibrators ........................... 89 Ecco Lights .................................................. 82 - 83 Eco Thaw ............................................................. 75 Federal Signal Lights ......................................... 84 Fisher Plows and Spreaders....................... 18 - 27

Walk-Behind Spreaders

Getting deicers into smaller areas is exactly what the new BOSS family of Walk-Behind Spreaders is designed to do. True to THE BOSS name, they're designed to be tough, easy to use and durable. Available in Broadcast or Drop-down models, these spreaders will get the job done quickly and easily.

Broadcast Spreader WBS15800

•70 Lb. Capacity •Spreads dry, free flowing salt and deicers •Adjustable chute for pattern control •Weather Cover •Stainess Steel Side Deflector •Gear cover wtih limited lifetime gear warranty •Ergonomic handle •13” pneumatic tires 2

Hamsar Lights .................................................... 85 Heated Seats ...................................................... 77 La Rue Snowblowers ......................................... 72 Minimizer Fenders .............................................. 89 Monroe Snow & Ice Equipment ................. 56 - 61 OnSpot Tire Chains ............................................ 77 Pro Tech Snow Pushers ............................. 52 - 55 Roadwatch Safety System ................................ 77 Seat Warmers ..................................................... 77 Snow Ex Spreaders ..................................... 46 - 51 Snow Wolf Snowplows ...................................... 74 Tekonsha Brake Controllers ............................. 88 Timbren Suspensions Kits ........................ 78 - 79 Ultimate Scraper ................................................ 75 Weatherguard Toolboxes .................................. 90 Whelen Lights ............................................. 80 - 81

Drop Spreader WBS15900

•100 Lb. Capacity •Spreads dry, free flowing salt and deicers •Spring loaded on/off •Split axle w/independent agitation •Ergonomic handle •13” pneumatic tires

The DXT is available in Steel in 8‛2”, 9‛2” & 10‛, Poly & Stainless Steel are available in 8‛2” & 9‛2” Lengths! THE BOSS POWER-V DXT PLOWS. The most fully featured snowplows that THE BOSS has ever produced. The DXT family features a dual-trip design, combining both trip-edge and full moldboard trip technologies for maximum plow and vehicle impact protection.

All DXT plows come standard with Smartlock Cylinders

The DXT family features heavy-duty push frames and center sections for tough, BOSS reliability and durability. Heavy-duty torsion springs provide maximum trip edge The DXT family is built with the exclusive BOSS SmartShield performance and outstanding reliability and durability. finish providing years of corrosion resistance and durability. Base angle (cutting edges) trip independently, The tripping base angles on the Power-V DXT significantly reducing impacts from lower obstacles such come standard with curb guards and snow catcher, as manhole covers while the BOSS full moldboard trip and can be used as the cutting edge until worn. protects against taller obstructions (6 inches or more) such as frozen snow banks - in vee, scoop and angled positions. Both the standard base angle and optional cutting edge are made from Hardox ® for maximum wear resistance and durability. The DXT utilizes SmartHitch2 and the same electrical system and controls as RT3 8'2" 8'2" 8'2" 9'2" 9'2" 9'2" 10' S te e l P oly S .S . S te e l P oly S .S . S te e l M ode l plows for convenience and ease of use. B lade Width The DXT family utilizes the same durable, fully enclosed, (S traight) 98" 98" 98" 110" 110" 110" 120" weather-protected hydraulic system used by the entire B lade Width (V) 88" 88" 88" 99" 99" 99" 107" B lade Width BOSS line up for hassle-free, low-maintenance 81" 81" 81" 92" 92" 92" (S coop) 102" operation in even the worst conditions. P lowing Width @ 85" 85" 85" 30 D e g. Angle The DXT family features the flared-wing design and perfor95" 95" 95" 104" 30" at C e nte r, 30" at C e nte r, 30" at C e nte r, mance of Power-V XTs, for max snow throwing performance. B lade H e ight 37.5" at E nd

B lade T hickne ss C utting E dge D ime nsions (O pt.) R e inforce me nt R ibs P low S hoe s T rip S prings (M oldboard) T rip S prings (C utting E dge ) Angle C ylinde rs Lift C ylinde r Attachme nt S tratgy P low We ight* P low Lights

11 G a. S te e l

12 G a. 304 3/8" P oly S .S .

11 G a. S te e l

38.5" at E nd

12 G a. 304 3/8" P oly S .S .

11 G a. S te e l

1/2" x 6" H ardox 6 Ve rtical, 2 D iagonal

8 Ve rtical, 2 D iagonal O ptional 4 E xte nsion S prings

3 T orsion S prings(P e r B lade H alf) S martlock (S tandard) 2" x 1 1/8" x 12"

2" x 1 1/8" x 10" S martH itch 2 868 Lbs. 878 Lbs.

920 Lbs.

925 Lbs. 935 Lbs.

977 Lbs.

1,205 Lbs.

S martLight 2

*P low we ight doe s not include mount, M ount we ight range : 130 - 160 lbs.

Built to perform and boasting flared blade wings with an enhanced curl, THE BOSS Power-V XT throws snow with maximum efficiency to keep you plowing at the top of your game. All Power V-XTs feature tough cutting ® edges made of Hardox for long-lasting wear resistance and standard SmartLock Cylinders to maximize backdragging performance.

Standard Features of all Boss Power V-XT Plows

Call And Ask About Dig Deeper. Prices On Plows Throw Farther. & Installation Move Faster. 8’2” 37”

•Flared Blade Wings •2 Year Limited Warranty •Enclosed Hydraulics •1/2” x 6” High-Performance Cutting Edge (w/built in curb guards) •Heavy Duty Attachment System •Full Moldboard Trip Design •SmartHitch2 •High-Performance Hydraulic Package •Chainless Hydraulic Cylinder Lifting System M ode l B lad e W id th (S traig h t) B lad e W id th (V) B lad e W id th (S co o p ) P lo w in g W id th at 30º An g le B lad e H e ig h t B lad e T h ickn e ss C u ttin g E d g e R e in fo rce d R ib s P lo w S h o e s T rip S p rin g s An g le C ylin d e rs L ift C ylin d e r P lo w W e ig h t

9’2” 38”

Poly V-XT 8’2” 37”

30”

9’2” 38”

8'2" S te e l V-X T 98" 88" 81" 85" 37" at e n d , 30" at ce n te r 11 g a. S te e l 1/2" x 6" 6 Ve rtical, 2 D iag o n al O p tio n al 4 1 1/2" x 10" 2" x 1 1/8" x 10" 785 L b s. B

*P lo w w e ig h t d o e s n o t in clu d e mo u n t w e ig h t

30”

Steel V-XT 9'2" S te e l V-X T 110" 99" 92" 95" 38" at e n d , 30" at ce n te r 11 g a. S te e l 1/2" x 6" 8 Ve rtical, 2 D iag o n al O p tio n al 4 1 1/2" x 10" 2" x 1 1/8" x 10" 842 L b s. B

8'2" P o ly V-X T 98" 88" 81" 85" 37" at e n d , 30" at ce n te r 3/8" P o ly 1/2" x 6" 6 Ve rtical, 2 D iag o n al O p tio n al 4 1 1/2" x 10" 2" x 1 1/8" x 10" 795 L b s. B

9'2" P o ly V-X T 110" 99" 92" 95" 38" at e n d , 30" at ce n te r 3/8" P o ly 1/2" x 6" 8 Ve rtical, 2 D iag o n al O p tio n al 4 1 1/2" x 10" 2" x 1 1/8" x 10" 852 L b s. B

B Ve h icle mo u n t w e ig h t ran g e : 75-105 lb s. **In clu d e s 1-to n tru cks w ith d u al re ar w h e e ls

Nothing stands in the way of THE BOSS. The tough yet versatile Steel Power-V features a half-inch thick, patented high-performance cutting edge made of Hardox ® that delivers extended wear resistance compared to conventional cutting edges. In addition, our baked-on powder-coat paint finish comes with an exclusive zinc primer to resist corrosion and protect your plow. All the right features and legendary durability and dependability make them an outstanding value.

Power V Plow Features

•SmartHitch2 •SmartLight2 •SmartTouch2 •Smartshield •1/2” x 6” High-Performance Cutting Edge extended wear resitance comes with built in curb-guards and snow catcher. •High-Performance Hydraulic Package delivers reliability and speed. •Enclosed Hydraulics •Chainless Hydraulic Cylinder Lifting System •Full Moldboard Trip Design •Heavy-Duty Push Frame & Quadrant •Reinforced Moldboard increases blade rigidity •2 Year Limited Warranty M ode l B la d e W id th (S tr a ig h t) B la d e W id th (V) B la d e W id th (S c o o p ) P lo w in g W id th a t 3 0 º An g le B la d e H e ig h t B la d e T h ic k n e s s R e in fo r c e d R ib s T r ip S p r in g s An g le C ylin d e r s L ift C ylin d e r Atta c h m e n t S ys te m P lo w W e ig h t* P lo w L ig h ts

AVAILABLE IN: 7'6", 8'2" & 9'2"

7'6" 90" 81" 74" 77" 30" 1 4 g a . s te e l 6 Ve r tic a l, 2 D ia g o n a l 4 1 1 /2 " x 1 0 " 2 " x 1 1 /8 " x 1 0 " S m a r tH itc h 2 7 0 0 lb .B S m a r tL ig h t 2

* P lo w w e ig h t d o e s n o t in c lu d e m o u n t w e ig h t * * In c lu d e s 1 -to n tr u c k s w ith d u a l r e a r w h e e ls

Call and Ask About Prices On Plows & Installation

8'2" 98" 88" 81" 84" 30" 11 gauge 6 Ve r tic a l, 2 D ia g o n a l 4 1 1 /2 " x 1 0 " 2 " x 1 1 /8 " x 1 0 " S m a r tH itc h 2 7 7 0 lb .B S m a r tL ig h t 2

9'2" 110" 99" 92" 95" 30" 11 gauge 8 Ve r tic a l, 2 D ia g o n a l 4 1 1 /2 " x 1 0 " 2 " x 1 1 /8 " x 1 0 " S m a r tH itc h 2 8 3 8 lb .B S m a r tL ig h t 2

B Ve h ic le m o u n t w e ig h t r a n g e : 7 5 -1 0 5 lb s .

RT3 V & V-XT Parts

Light In Weight. Heavy In Toughness.

When facing the obstacles, we know what you need. The 7’0” BOSS Sport-Duty Plow is built especially for downsized 4x4’s and SUVs, while the 7’6” Sport-Duty is perfect for full-size half-ton trucks and SUVs. Both offer a super-slick polyethylene moldboard, which saves fuel as well as wear and tear on your truck by making sure snow slides right off the blade.

Call and ask about prices on plows & installation 7'6" S p o rt-D u ty

7'6" S p o rt-D u ty

B lad e W id th (S traig h t) B lad e W id th 30º An g le B lad e H e ig h t B lad e T h ickn e ss C u ttin g E d g e R e in fo rce d R ib s P lo w S h o e s T rip S p rin g s An g le C ylin d e rs L ift C ylin d e r S h o ck Ab so rb e r

84" 73" 26" 1/4" P o ly 1/4" x 6" 4 Ve rtical, 2 D iag o n al O p tio n al 2 1 1/2" x 6 1/2" 2" x 1 1/8" x 10" N /A R T 3 stan d ard S martH itch 2 S tan d ard 372 lb .A D u al h alo g e n b u lb (co mp o site lig h t) D u al-stu d mtg . syste m

90" 78" 26" 1/4" P o ly 3/8" x 6" 6 Ve rtical, 2 D iag o n al O p tio n al 2 1 1/2" x 6 1/2" 2" x 1 1/8" x 10" N /A R T 3 stan d ard S martH itch 2 S tan d ard 421 lb .B D u al h alo g e n b u lb (co mp o site lig h t) D u al-stu d mtg . syste m

P lo w L ig h ts

Standard w/Smarthitch 2

Standard Features

M ode l

Attach me n t S yste m P lo w W e ig h t*

Sport Duty Plows

•SmartLight2 •SmartTouch2 •Smarthitch 2 •SmartShield •High-Performance Hydraulic Package •Enclosed Hydraulics •2 Year Limited Warranty •Chainless Hydraulic Cylinder Lifting System •Full Moldboard Trip Design •Heavy-Duty Push Frame & Quadrant •Super-Slick Polythylene Reinforced Moldboard

*P lo w w e ig h t d o e s n o t in clu d e mo u n t w e ig h t A Ve h icle mo u n t w e ig h t ran g e : 45-75 lb s. B Ve h icle mo u n t w e ig h t ran g e : 75-105 lb s

Poly & Steel Straight-Blade Standard-Duty Plows

Standard-Duty are the classic workhorses. The tough, long-lasting Steel-Straight Blade features a baked-on powder-coat finish with exclusive zinc primer to resist corrosion, while the super-slick poly moldboard makes sure snow slides right off the blade-saving time, fuel and wear and tear on your truck. Exclusive features like a heavy-duty push frame and quadrant, optimized blade curl and the Super-Duty’s reinforced moldboard make it a performer that leads all others in reliability & strength! M ode l B lad e W id th (S tr aig h t) B lad e W id th 30º An g le B lad e H e ig h t B lad e T h ickn e ss R e in fo r me n t R ib s P lo w S h o e s T r ip S p r in g s An g le C ylin d e r s L ift C ylin d e r Attach me n t S yste m P lo w W e ig h t*

7'6" S tan d ar d -D u ty 90" 78" 27 1/2" 14 g a. S te e l 7 Ve r tical C ast Ir o n 3 1 1/2" x 10" 2" x 1 1/8" x 10" S mar th itch 2 597 lb .B

7'6" S tan d ar d -P o ly 90" 78" 27 1/2" 3/8" P o ly 7 Ve r tical C ast Ir o n 3 1 1/2" x 10" 2" x 1 1/8" x 10" S mar tH itch 2 633 lb .B

* P lo w w e ig h t d o e s n o t in clu d e mo u n t w e ig h t A Ve h icle mo u n t w e ig h t r an g e : 45-75 lb s. B Ve h icle mo u n t w e ig h t r an g e : 75-105 lb s

Standard Features of Standard-Duty Straight-Blade Plows •SmartHitch2 •SmartLight2 •SmartTouch2 •Smartshield •3/8” x 6” Cutting Edge •High-Performance Hydraulic Package •Enclosed Hydraulics •Cast Iron Plow Shoes •Chainless Hydraulic Cylinder Lifting System •Full Moldboard Trip Design •Heavy-Duty Push Frame & Quadrant •Reinforced Moldboard •Blade Shock Absorber •2 Year Limited Warranty

Super-Duty Plows

Exclusive features like a heavy-duty push frame and quadrant, optimized blade curl and the Super-Duty's reinforced moldbard make it a performer that leads all others in reliability and strength.

Ideal for 4x4 1/2 to 1-Ton Trucks and SUV‛s

All Super-Duty plows feature a reinforced moldboard with diagonal cross-bracing and formed bottom channel increase blade rigidity.

The super-slick polyethylene moldboard of the Poly Straight-Blade makes sure snow slides right off the blade - saving time, fuel and wear and tear on your truck

Standard Features of Super-Duty Plows •SmartHitch2 •SmartLight2 •SmartTouch2 •Smartshield •1/2” x 6” High-Performance Cutting Edge •High-Performance Hydraulic Package •Enclosed Hydraulics •Cast Iron Plow Shoes •Chainless Hydraulic Cylinder Lifting System •Full Moldboard Trip Design •Heavy-Duty Push Frame & Quadrant •Reinforced Moldboard •Blade Shock Absorber •2 Year Limited Warranty

Poly

M odel B la d e W id th (S tra ig h t) B la d e W id th 3 0 º A n g le B la d e H e ig h t B la d e T h ic k n e s s C u ttin g E d g e

Steel

Call And Ask About Prices On Plows & Installation

7 '6 " S u p e r-D u ty 90" 78" 2 7 1 /2 " 11 gauge 1 /2 " x 6 " 7 V e rtic a l, 2 D ia g o n a l

8 ' S u p e r-D u ty 96" 83" 29" 11 gauge 1 /2 " x 6 " 7 V e rtic a l, 2 D ia g o n a l

8 '6 " S u p e r-D u ty 102" 88" 29" 11 gauge 1 /2 " x 6 " 7 V e rtic a l, 2 D ia g o n a l

R e in fo rc e d R ib s T rip S p rin g s 4 4 4 A n g le C ylin d e rs 1 1 /2 " x 1 0 " 1 1 /2 " x 1 0 " 1 1 /2 " x 1 0 " L ift C ylin d e r 2 " x 1 1 /8 " x 1 0 " 2 " x 1 1 /8 " x 1 0 " 2 " x 1 1 /8 " x 1 0 " S h o c k A b s o rb e r(s ) 1 1 1 P lo w W e ig h t* 6 8 0 lb . 6 9 8 lb . 7 2 0 lb . *P lo w w e ig h t d o e s n o t in c lu d e m o u n t w e ig h t. V e h ic le m o u n t w e ig h t ra n g e : 7 5 -1 0 5 lb s

9 ' S u p e r-D u ty 108" 9 3 1 /2 " 29" 11 gauge 1 /2 " x 6 " 7 V e rtic a l, 2 D ia g o n a l

8 ' S u p e r-D u ty P o ly 96" 83" 29" 3 /8 " P o ly 1 /2 " x 6 " 7 V e rtic a l, 2 D ia g o n a l

4 1 1 /2 " x 1 0 " 2 " x 1 1 /8 " x 1 0 " 1 7 4 2 lb .

4 1 1 /2 " x 1 0 " 2 " x 1 1 /8 " x 1 0 " 1 7 2 2 lb .

weldments

RT3 Straight Blade Plow

B-8, B-10 & BX-12 Box Plows Each plow is designed to attach to any B-8 & B-10 skid steer vehicle thanks to a universal coupler system. The B-8 and B-10 feature attachment plates with built-in float and pivot features which keep the blade firmly on the ground and at an optimal angle while negotiating rough terrain. An exclusive bolt-on wing design ensures that if a wing is bent, a new one can be quickly and easily bolted-on. Universal Skid Steer Attachment Plates built-in float and pivot features optimize plowing performance and angle on uneven, rough surfaces. Heavy-Duty Trip-Edge Springs are tough, tested and proven in some of the harshest environments. Universal Coupler System allows the B-8 and B-10 to attach to any skid steer. High-Efficiency Moldboard features a 56-degree attack angle that “rolls” the snow and reduces resistance. Bolt-On Wing Design allows quick and easy replacement of wing if damage occurs. Heavy-Duty Plow Shoes provide excellent wear resistance to keep the box plows performance at a high level. SmartShield features our exclusive zinc primer which provides one of the toughest and most corrosion-resistant paint finishes in the industry.

BX-12 Box Plow

THE BOSS BX-12 is designed to maximize efficiency and minimize wear and tear. It features a segmented trip-edge which allows the part of the cutting edge that comes into contact with an obstruction to trip independently of the rest of the cutting edge. High-Efficiency Moldboard features a 70-degree attack angle that “rolls” the snow and reduces resistance. Exclusive Self-Adjusting Box Wings automatically adjust to the contour of the pavement and eliminate scoop angle adjustments. Segmented Trip-Edge Design is engineered so each cutting edge segment trips individually Heavy-Duty Trip Springs are torture-tested on the toughest proving ground there is. Universal Fork Mounting System attaches quickly and easily with a simple slide. Exclusive Support Struts pivot for structural strength, stability and long-term reliability.

Skid Steer Box Plows M ode l B -8 B -10 B lade Width 8'4" 10'4" Approx. We ight 900 Lbs. 1,000 Lbs. M oldboard H e ight 30" 30" 6" C utting E dge 6" T rip S trate gy T rip-E dge T rip-E dge T rip H e ight C le arance 5" 5" S ide plate D ime nsions 38" x 30.75" 38" x 30.75" S ide plate T hickne ss 1/4" 1/4" Automatic Automatic S ide plate Le v e ling Ve rtical S upports 6 8 1 U ppe r, 3 U ppe r, H oriz ontal S upports 3 Lowe r 5 Lowe r U niv e rsal U niv e rsal Attachme nt S tratgy C ouple r C ouple r Ve rtical H itch Float Automatic Automatic Abrasion Abrasion P low S hoe M ate rial R e sistant R e sistant S te e l S te e l

10‛ Heavy-Duty Straight Blade Plow The Biggest Jobs Have Just Met Their Match When winter’s wrath is approaching, sometimes smaller-size plows just don’t cut it. Designed for medium-duty trucks, THE BOSS Heavy-Duty Straight-Blade features a reinforced moldboard with enhanced blade curl to power through deep, wet snow. Standard Features •1 1/2” x 6” High-Perf Cutting Edge w/Built-In Curb Guards •High-Performance Hydraulic Package •Enclosed Hydraulics •Chainless Hydraulic Cylinder Lifting System •Full Moldboard Trip Design •Dual Shock Absorbers •Heavy-Duty Push Frame & Quadrant •Reinforced Moldboard •Cast Iron Plow Shoes •2 Year Limited Warranty

TRIP EDGE SKID STEER PLOWS

When the pros are on the job, the versatile BOSS Trip-Edge Skid Steer Plow takes the surprises out of blade-jarring obstacles like ice, curbs and manhole covers. Its built-in side-to-side float is designed specifically to follow the contours of whatever you’re plowing and the reinforced moldboard, cast-iron plow shoes shoes and heavy-duty push frame give you that legendary BOSS muscle for even the toughest jobs.

Standard Features •SmartShield •Built-In Side-To-Side Float •Existing Skid Steer Controls •Universal Tool Carrier •Heavy-Duty Push Frame •Angle Cylinders •Cast-Iron Plow Shoes •Adjustable Mounting Height •Hydraulic Crossover Relief System

Call And Ask About Plow & Installation Prices B lad e W id th S traig h t B lad e W id th V B lad e W id th S co o p P lo w in g W id th At 30 D e g re e An g le B lad e H e ig h t B lad e T h ickn e ss C u ttin g E d g e D ime n sio n s R e in fo rce me n t R ib s P lo w S h o e s T rip S p rin g s (M o ld b o ard ) T rip S p rin g s (C u ttin g E d g e ) An g le C ylin d e rs L ift C ylin d e rs Attach me n t S yste m P lo w W e ig h t P lo w L ig h ts

120" 107" 102" 104" 35" at C e n te r, 45" at E n d 11 G a. S te e l 1/2" x 6" 8 Ve rtical, 2 D iag o n al O p tio n al 4 E xte n sio n S p rin g s 3 T o rsio n s S p rin g s (p e r b lad e h alf) 2" x 10" 2 1/4" x 1 1/8" x 12" S martH itch 2 1,205 L b s. S martL ig h t2

Call & Ask About Pricing

M ode l 7'6" 8'0" 9'0" M oldboard Width 90" 96" 108" P lowing Width 30º Angle 78" 83" 93 1/2" M oldboard H e ight 30" 30" 30" M oldboard T hickne ss 11 ga. S te e l 11 ga. S te e l 11 ga. S te e l 1/2" x 6" x 3 1/2" 1/2" x 6" x 3 1/2" 1/2" x 6" x 3 1/2" B ase Angle S iz e 1/2" x 6" 1/2" x 6" 1/2" x 6" C utting E dge (O ptional) 6 v e rtical, 2 diagonal 8 v e rtical, 2 diagonal B lade R e inforcing R ibs 6 v e rtical, 2 diagonal B lade S hoe s C ast iron C ast iron C ast iron T rip S prings 4 4 4 T rip P iv ot P in D iame te r 1" 1" 1" 3/8" hooke d e xt. spring 3/8" hooke d e xt. spring 3/8" hooke d e xt. spring T rip S pring T ype Angle C ylinde rs 2" x 1 1/8" x 10" 2" x 1 1/8" x 10" 2" x 1 1/8" x 10" We ight C omple te 903 lbs 820 lbs 870 lbs M ounts on all skid ste e rs with a univ e rsal tool carrie r attachme nt syste m.

TGS800 Tailgate Sand/Salt Spreader w/RT3 Attachment

Designed to spread sand, salt or a mixture of both, the TGS800 offers many of the same great features like a solid poly hopper, adjustable feed rate and a choice of two mounting systems.

Low Profile D esign H opper C onstruction H opper C apacity H opper D im ensions Spreader W eight C om plete H opper C over Feed M echanism Adjustable Feed R ate Spreading M aterial Top Screen w /B ag Splitter Spinner (Sw ing-Aw ay) M aterial Spread W idth Adjustable Poly M aterial D eflector Variable Speed C ontrol w /B last & O verload Protection Paint Finish Vehicle Application W arranty

Yes Poly w /S teel Fram e 8 cu. ft. / 800 lbs. 48” H x 36”W x 21” D 220 Lbs. Solid Poly C olver Self-Agitating Feed P addle w /Sw ing-Aw ay Spinner Assem bly Yes Sand, S alt/Sand M ix, Salt Yes 12” P oly 4’ x 20’ Yes Sm artShield w /Zinc Prim er Full-S ize P ickups w /C lass IV Trailer H itch R eceiver 2 – Year Lim ited W arranty

•Solid Poly Hopper Cover •Low-Profile Design Poly Hopper •Poly-Adjustable Material Deflector & 12” Diameter Poly Spinner •Swing Away Spinner Assembly •Top Screen w/Bag Splitter

VBX8000 Spreader The new VBX spreader from THE BOSS has features that professional snow and ice removers will appreciate. Powered by a completely sealed, 1/2 horsepower, stainless steel motor and a massive gear box outfitted with both planetary and worm gears, the VBX is designed to overcome the common problems that plague other V-box spreaders on the market. It’s what you’ve come to expect from THE BOSS: Durability, Reliability and Ease of Use. M ode l

Auge r S pre ade r

P intle C hain S pre ade r

H oppe r C apacity H oppe r Le ngth H oppe r O v e rall Le ngth H oppe r H e ight H oppe r Width Full U nit We ight H oppe r C onstruction S pre ading Width M ax Fe e d R ate

2 Y ds 96" 115" 38" 48 1/4" 600 Lbs 3/16" D ouble Wall P oly H oppe r 2 - 40 Ft 2.3 C u. Ft/M inute

2 Y ds 96" 115" 38" 48 1/4" 650 Lbs. 3/16" D ouble Wall P oly H oppe r 2 - 40 Ft. 4.0 C u Ft/M inute

Lighting

D ual 55 watt haloge n work lights

18 oz . VC P T arp 18 oz . VC P T arp w/tie -downs w/tie -downs C ov e r T op S cre e n S tandard S tandard M otor 1/2 H .P . S S Fe e d M otor 1/2 H .P . S S Fe e d M otor C ab C ontrolle r LC D D isplay LC D D isplay D ual Var. S pe e d C ontrol S tandard S tandard D ual Var. S pe e d Vibrators S tandard O ptional Adjustable D e fle ctor S tandard S tandard S pinne r 14.5" P oly S pinne r 14.5" P oly S pinne r

Stainless steel drive train components for corrosion resistance, reduced maintenance and longer life.

•Tough, corrosion resistant 8’ poly hopper with 2 cubic yards of capacity. •The VBX is available with either a pintle chain or auger feed system. •All new BOSS control system features dual motor control and an LCD screen for ease of use, reliability and good looks.

ATV Plows

Switch Box Controller

Easy to mount and conveniently accessible on the handle bar, the ATV controller is simple and easy to use. Enjoy the robust, ergonomic button design for maximum comfort while plowing.

U nde rcarriage P low Lifting P low Angling

5' P oly S traight B lade 60" 52" 22" 1/8" P oly 4 2 3/16" x 4" R e v e rsible Low P rofile (T rail C ompatible ) H ydraulic H ydraulic

H ydraulic P ackage Attachme nt S yste m P aint Finish C ontrol We ight C omple te T ripping M e chanism Warranty Installation T ime S now D e fle ctor

H igh P e rformance (C ome s O ff P low) RT3 S martS hie ld S witch B ox 178 Lbs Full-B lade T rip 2 Y e ars - Limite d 2 1/2 H ours O ptional

M ode l B lade Width (S traight) P lowing Width at 30º Angle B lade H e ight B lade M ate rial Ve rtical S upport R ibs T rip R e turn S prings S prings C utting E ge

Ground Clearance

Not only did we make the low-profile undercarriage rugged and tough, we also maintained a minimal decrease in ground clearance. That means, when your Boss ATV plow is not attached, your ATV will remain trail compatible.

Standard Features: •Fully Hydraulic System No winch or manual lift •RT3 Attacment System •30 degrees of hydraulic lifting height •30 degrees of power angling for maximum blade lift and higher snow stacking •Low-profile undercarriage Undercarriages availalble for Polaris 550/820 Sportsman Additional undercarriages coming soon!

UTV Plows •Steel Power V-XT – Boasting 30.5” flared blade wings with an enhanced curl, throws snow higher and farther than any plow on the market. •It’s 1 ¼” x 5” high-performance cutting edge with built-in curb guards & snow catcher delivers extended wear resistance. •The Straight-Blade plow is a classic workhorse with a polyethylene moldboard to make sure snow slides right off – saving time, fuel and wear and tear on your vehicle. •Toughest, Most Reliable Hydraulics – Boss hydraulic pumps are fully enclosed to protect against moisture andfreeze-up while being protected by a steel frame for unmatched durability. •Unmatched Ground Clearance – Along with a rugged and tough undercarriage, this means your UTV remains the off-road capable vehicle you need.

Available for: , ClubCar, Cub Cadet, Honda, Husvarna, John Deere, Kawasaki, Kubota, New Holland & Polaris M odel B la d e W id th (S tr a ig h t) B la d e W id th - V e e B la d e W id th - S c o o p B la d e H e ig h t B la d e M a te r ia l V e r tic a l S u p p o r t R ib s T r ip R e tu r n S p r in g s C u ttin g E d g e B la d e S h o e s U n d e r c a r r ia g e P lo w L iftin g P lo w A n g lin g H y d r a u lic P a c k a g e A tta c h m e n t S y s te m P a in t F in is h C o n tr o l W e ig h t C o m p le te T r ip p in g M e c h a n is m W a rra n y In s ta ll T im e

6 '6 " P o w e r -V X T 78" 78" 6 6 1 /2 " 2 5 " In s id e to 3 0 1 /2 " O u ts id e 1 4 G a u g e S te e l 6 2 1 /4 " x 5 " H ig h P e r fo r m a n c e O p tio n a l

6 ' P o ly S tr a ig h t 72" N /A N /A 2 4 1 /2 " 1 /4 " P o ly 4 2 1 /4 " x 4 " O p tio n a l

S lo p e d P r o file (T r a il C o m p a tib le ) S lo p e d P r o file (T r a il C o m p a tib le ) H y d r a u lic H y d r a u lic H ig h -P e r fo r m a n c e (C o m e s o ff w ith th e p lo w )

H y d r a u lic H y d r a u lic H ig h -P e r fo r m a n c e (C o m e s o ff w ith th e p lo w )

R T3 S m a r tS h ie ld S m a r tT o u c h 2 400 Lbs. F u ll-B la d e T r ip D e s ig n 2 -Y e a r L im ite d W a r r a n ty A p p r o x . 2 1/2 Hours

R T3 S m a r tS h ie ld S m a r tT o u c h 2 314 Lbs. F u ll-B la d e T r ip D e s ig n 2 -Y e a r L im ite d W a r r a n ty Approx. 2 1/2 Hours

POWER-V HIGH PERFORMANCE CUTTING EDGES

Featuring built-in curb guards and a snow catcher. Power-V cutting edges are made of a highperformancesteel that delivers double the wear resistance of conventional cutting edges. 7'6" DRIVER'S SIDE 7'6" PASSENGER'S SIDE 8'2" DRIVER'S SIDE 8'2" PASSENGER'S SIDE 8'2" DRIVER'S SIDE DXT 8'2" PASSENGER'S SIDE DXT 9'2" DRIVER'S SIDE DXT 9'2" PASSENGER'S SIDE 9'2" DRIVER'S SIDE DXT 9'2" PASSENGER'S SIDE DXT 10' DRIVER'S SIDE 10' PASSENGER'S SIDE 10' DRIVER'S SIDE DXT 10' PASSENGER'S SIDE DXT

B la d e L e n g th 7 '6 " S u p e r D u ty 7 '6 " S ta n d a rd D u ty 7 '6 " P o w e r V (1 /2 ) 8 ' S u p e r D u ty 8 '6 " S u p e r D u ty 8 '2 " P o w e r V (1 /2 ) 9 ' S u p e r D u ty 9 '2 " P o w e r V (1 /2 )

604-BAL8857 604-BAR8856 604-BAL8859 604-BAR8858 604-BAL18150 604-BAR18145 604-BAL8861 604-BAR8860 604-BAL18165 604-BAR18155 604-BAL8863 604-BAR8862 604-BAL17580 604-BAR17590

P a rt N u m b e r 6 0 4 -S T B 3 0 0 2 6 0 4 -S T B 3 0 7 1 6 0 4 -B A X 0 0 9 7 6 0 4 -S T B 3 0 0 3 6 0 4 -S T B 3 0 7 2 6 0 4 -B A X 0 0 9 8 6 0 4 -S T B 3 2 4 2 6 0 4 -B A X 0 0 9 9

CURB GUARDS

These long-lasting. high-impact curb guards protect the edge of your plow against wear. The Power-V guard fits all THE BOSS pre-2006 Power-V models, while the Straight-Blade guard fits all models except the 10' plow.

POWER-V CURB GUARDS DRIVER'S SIDE/PASSENGER'S SIDE 604-BAL0898/604-BAR0498 STRAIGHT-BLADE CURB GUARDS DRIVER'S SIDE/PASSENGER'S SIDE 604-STB3395/604-STB3394

SMARTTOUCH 2 MOUNTING OPTIONS

TOUCH-UP SPRAY PAINT

The SmartTouch 2 Handheld Control is not only smart, it's also the most versatile way to operate your plow. That's because its handle is detachable, so it goes wherever you need it. You can attach it to a pedestal mount, mount it on your dash, hold it in your hand or strap it to your leg 1. PEDESTAL MOUNT 604-MSC9658 2. DASH MOUNT 604-MSC9660 3. LEG STRAP MOUNT 604-MSC9659

Keep your plow looking brand-new year after year by covering chips and scrapes the professional way. RED 604-MSC4098 BLACK 604-MSC4036

HIGH-PERFORMANCE HYDRAULIC FLUID Specially formulated to maintain its viscosity from normal use to as low as – 40° Fahrenheit will enchance performance under the most adverse conditions.

JOYSTICK CONTROL

With a lighted on/off switch and the ability to adjust for either right or left-hand use, these joystick controls will put you in control of your plow like never before.

STRAIGHT-BLADE JOYSTICK 604-STB03191 POWER-V JOYSTICK CONTROL CAST-IRON PLOW SHOES 604-MSC03809

GALLON 604-HYD1688

QUART 604-HYD1704

These ultra-rugged cast-iron shoes deliver three times the wear resistance of conventional steel shoes. PLOW SHOE ASSEMBLY 604-MSC1570 SPORT-DUTY SHOE KIT (W/BRACKETS) 604-MSC9588

The Snowplow Sight System

The Sight System allows you to align your truck and plow from inside your cab for hookups on the first try, every time.

Boss Power-V Straight Blade Handheld Control Handheld Control 604-MSC9601 604-STB9602

Boss Straight Blade Control Pad 604-STB9617

Boss Power-V Control Pad 604-MSC9616

RETURN SPRING 604-MSC7705

SPRING 604-MSC1509 Blade Guides w/Hardware

604-MSC9644

EYE BOLT 604-HDW1744

604-MSC1870 KICKSTAND LEG, STRAIGHT BLADE 604-STB3220

SOLENOID SNOW CATCHER 604-HYD1633 604-MSC4253

EMERGENCY PARTS KIT

This kit features a selection of the most useful replacement parts packaged in a plastic case that fits easily behind the seat of your truck. 604-MSC4298

KICKSTAND SPRING KIT 604-MSC3807 11-Pin Vehicle Connector Vehicle Side 604-MSC3751 Plow Side 604-MSC37542

13-Pin Vehicle Connector Vehicle Side 604-MSC4753 Plow Side 604-MSC4754

The X-Pandable Length Snowplow From an 8-foot retracted straight blade From Fisher! width, to the 10-foot expanded width, to a

scoop width of over 9 feet, and a more effective windrowing configuration, the Fisher XLS delivers a new level of profitable performance in every plowing situation. The XLS features Fisher’s Minute Mount 2 – the easiest and most trouble-free attachment system available. The under carriage and electrical connections are compatible with other style Fisher plows for added fleet flexibility.

The wide scoop position simply carries more snow. Plus, the XLS fully angles in the scoop position to maximize handling & capacity when cornering or plowing Hydraulically transform the XLS to more effectively match any plowing situation!

Aggressive 70-degree attack angle provides a cleaner scrape and less need for de-icing.

Blade Width (Retracted) 96" (8' 0")

Blade Width Blade Width Blade Width @ (Extended) (Scoop) Full Angle 120" (10' 0")

106" (8' 10")

86"/108"/95"

Blade Height 29"

Blade/Wing Gauge

Cutting Edge (Optional)

Wing Cutting Edge Material

Ribs

12ga /12ga

½" x 6" Top Punch

1½" x 8" Polyurethane

Blade Wings – 1 Full (Each Wing)

Trip Springs

Angling Rams

Blade Shoes

*Plow Weight

4 Compression

1½" x 10"

Optional

1000

Blade Center – 6 Full; 2 Half

The XTreme V Is Available In 7 1/2’, 8 1/2’ & 9 1/2’ Blade Widths In Both Stainless And Mild/Powder Coated Steel The best features of the rugged XBLADE & the popular EZ-V snowplows & combined them to build an industry-best, adjustable v-plow – the XtremeV. Standard Features of The •Tapered Wing Design - Moldboard is 2” taller at outer edges fror superior snow rolling & carrying capacity •Gap Coverage – Steel center gap cover (top) and formed center cutting edges (bottom) prevent snow leakage in all blade positions •Standard Cutting Edge – High carbon, steel cutting edge for a clean scrape •Trip-Edge Design – Essential to the design of a V-plow, this feature protects the snowplow and your truck in all blade positions. Compression trip springs never need adjusting & never stretch like extension springs, providing the longest life of any spring on the market! •Extreme X-BRACING – Like on the rugged XBLADE, this provides superior torsional strength •Tighter Blade Curl – Along with a graduating moldboard overhang that’s 3 1/2" on the outer-most end of the blade wings for 7 1/2' & 8 1/2' blades and a full 6 1/2’ for 9 1/2' blades, this promotes exceptional snow rolling action •70 degree Attack Angle – Provides a cleaner scrape which reduces the need for de-icing •1" Base Angle Pins – Added strength where it’s needed most for longer life •T-Frame Design – Provides the optimum strength to weight ratio and allows for adjustment of the blade pitch

M o d el 7 1/2' M .S 7 1/2' S .S . 8 1/2' M .S . 8 1/2' S .S . 9 1/2' M .S . 9 1/2' S .S .

B lad e H eig h t 30 3/4" 30 3/4" 31" 31" 33" 33"

B lad e G au g e 12 12 12 12 12 12

# Of S p rin g s R ib s 4 12 4 12 4 12 4 12 4 12 4 12

1 1 1 1 1 1

An g lin g R am s 3/4" x 11" 3/4" x 11" 3/4" x 11" 3/4" x 11" 3/4" x 11" 3/4" x 11"

Chain Lift System

•You get instantaneous ‘float’ when lowering the blade - the blade can freely follow the contours of the plowing surface •In the rare event of hydraulic failure – you can ‘short chain’ the plow and safely transport it back to the shop. •You can stack snow higher - you’re not limited by the hydraulic ram stroke unlike life cylinder systems

P lo w in g W id th (F u ll An g le) 6'6" 6'6" 7'7" 7'7" 8'3" 8'3"

Everyone knows a v-plow – with its ability to change from "V" to straight to scoop – provides the ultimate in plowing efficiency. P lo w in g W id th (S co o p ) 6'3" 6'3" 7'1" 7'1" 7'11" 7'11"

P lo w in g W id th (V ) 6'9" 6'9" 7'7" 7'7" 8'7" 8'7"

Ap p ro x. W eig h t (L ess M o u n t) 821 821 876 876 1005 1005

C u ttin g Edge 3/8" x 6" 3/8" x 6" 3/8" x 6" 3/8" x 6" 1 1/2" x 6" 1 1/2" x 6"

Fisher XTremeV & XLS Service Parts

Built for tough commercial or municipal applications, the FISHER ® XBLADE™ combines our exclusive X-BRACING design with premium, corrosion-resistant stainless steel for a snow plow that’s as rugged as it is striking!

The XBlade Is Available In 8 & 9’ Blade Lengths In Stainless Steel •Xtreme blade curl and 10" moldboard “overhang” promotes optimum snow rolling and “foiling” action to keep plowed snow off the windshield. •Exclusive X-BRACING provides superior torsional strength and rigidity to eliminate moldboard stress. •Contains 1" base angle pins for added strength, and longer life. •Higher vertical compression spring attachment location for increased ground clearance and wear resistance.

•Xtreme 75º attack angle for better ice breaking and scraping. •Xtreme 31" blade height plows through the deepest snow. B lad e H e ig h t 31" 31"

M ode l 8' 9'

HD SERIES

T rip B lad e G au g e S p rin g s 12 G au g e S .S . 4 12 G au g e S .S . 4

An g lin g R ams 1 1/2" x 12" 1 1/2" x 12"

P lo w in g W id th (F u ll An g le ) 7'1" 7'11"

Ap p ro x. W e ig h t (L e ss M o u n t) 790 835

C u ttin g Edge 1 1/2" x 6" 1 1/2" x 6"

Built for the business of snowplowing, these rugged plows will withstand the rigors of commercial applications. These plows are the choice of the plowing professional. Designed for 1/2, 3/4 and 1-ton four-wheel drive trucks, as well as today's new 15,000 GVW "Super Duty" vehicles, these blades are 29" high and built with 11-gauge steel. The trip-edge is backed with 2 cutting bars at the bottom to increase wear resistance.

Call And Ask About Plow & Installation Prices M ode l B lade H e ight B lade G auge T rip S prings R ibs Angling R ams P lowing Width (Full Angle ) Approx. We ight (Le ss M ount) O ptional C utting E dge

R ib s 10 10

You can't go up against brutal winter weather with unproven, lightweight equipment.

7 1/2' 29" 12 3 8 1 1/2" x 12"

8' 29" 11 4 8 1 1/2" x 12"

8 1/2' 29" 11 4 8 1 1/2" x 12"

9' 29" 11 4 8 1 1/2" x 12"

6'7"

7'1"

7'6"

7'11"

630

717

731

145

1 1/2" x 6"

Plowing snow for a living is a tough business. The plow you choose must be strong enough to take a real beating.

The 75-degree attack angle is the most aggressive of any plow in its class, providing improved scraping and better back-dragging. As half-ton pickup truck manufacturers reduce

vehicle weight for increased fuel efficiency, plowers struggle to find a legitimate, rugged, hard-working snowplow that matches their vehicle specifications. Targeted specifically for today’s half-ton 4WD pickup trucks, the HT Series snowplow is a full-size, full-featured snowplow with the strength to handle standard-duty commercial, institutional and extended-use homeowner applications. B lad e B lad e Wid th H e ig h t 7'6"

27"

B lad e G au g e

# Of S p rin g s

R ib s

An g lin g R ams

6 + T u b e 1 1/2" x 8"

P lo w in g Wid th Ap p ro x. We ig h t We ar S h o e s (F u ll An g le ) (L e ss M o u n t) (C ast Iro n ) 6'7"

414

O p tio n al

O p tio n al C u ttin g E d g e 3/8" x 6" S te e l 1/2" x 6" S te e l 1" x 6" P o ly

The MC Series Snow Plow is a full 34” high and made from 11 gauge steel

Big trucks and big jobs require serious snow plowing equipment. The FISHER ® MC Series is the biggest, toughest plow we make. Built for municipal and contractor vehicles in the 17,000-27,500 GVW range, the MC Series is just right for narrow streets and intersections and large parking lots. Matching the plow to the job –®that’s how to get it done!

M odel 10' M C

B la d e H e ig h t 34"

B la d e G auge

T r ip S p r in g s

MC SERIES

R ib s

A n g lin g Ram s

P lo w in g W id th (F u ll A n g le )

A p p r o x . W e ig h t (L e s s M o u n t)

C u ttin g Edge

2" x 16"

7 '1 1 "

1428

1 /2 " x 8 "

Weighing as little as 250 lbs, the Homesteader meets all federal and manufacturers’ weight ratings for your vehicle, so there’s no worry about overloading your front end, like with heavier plows. Poly Blade - Durable polyethylene blade will not crack, and never needs painting. Even heavy wet snow rolls right off it’s slick surface. Easy On/Off - Either drive into the attachment arms on the plow, or slide the plow into the receiver brackets on your vehicle. Simply connect 2 pins, remove 2 jacks and plug in the electrical. Make the most Your Driveway. Your Plow - No more struggling with a of your vehicle snowblower, now you can clear your driveway with ease. with the M o d el 6'8" 7'4" personal use snowplow for 21" 21" B lad e H eig h t today’s light B lad e W id th 6'8" 7'4" trucks and Ap p ro x. W eig h t SUV’s (L ess M o u n t) 250 280

Fisher Straight Blade HD, MC, SD, EZ-V & XBlade Service Parts

2500 Low Profile Tailgate Spreader The 2500 offers ice control professionals the ultimate in convenience and performance. Standard features include 9.5 cu ft. low-profile, high density poly hopper, 12V DC high-torque motor located in a sealed housing in the hopper, 15" poly spinner disk, adjustable feed gate w/material flow shut-off, adjustable material deflectors, Class IV trailer hitch mount w/nylon ratchet straps & a molded polyethlene cover. A Class 4 receiver hitch mount is standard. No tools are required to install or remove the spreader.

Features positive mechanical material flow shut-off

Call And Ask About Prices On Spreaders & Installation

This FISHER tailgate spreader features a low-profile design which provides an unobstructed rear view from the vehicle cab. All models are ideal for spreading dry #1 rock salt, calcium chloride and other ice-melting materials.

The FISHER PRO-CASTER hopper spreader is perfect for ice control on driveways, roads and parking lots. Available in an 8' body length in stainless steel, this rugged v-box type spreader mounts easily on pick-ups, dump or platform trucks. All spreaders are covered by the 2 Season Warranty.

Pro Caster Features:

8’ Stainless Steel Pro Caster With 11 H.P. Honda Engine 2’ - 40’ Spreading Width

•The poly spinner will not rust, promoting longer life •Center High Mounted Stoplight (CHMSL) is standard •The conveyor on the PRO-CASTER spreader is 16" wide pintle chain. This wider conveyor reduces "bridging" and moves more material for faster unloading. •Replaceable poly spinner chute deflectors will not rust and are more forgiving when encountering obstacles while backing up. •A positive chain & sprocket drive for the conveyor system eliminates the streching and slippage sometimes encountered by v-type drive belts when placed under heavy load. Hopper C o n s tru c tio n 14 G a. S ta in le s s S te e l

D im e n s io n s L e n g th x W id th x H e ig h t 1 1 5 " x 5 0 3 /4 " x 3 2 "

Hopper W e ig h t* 7 0 0 lb s .

C a p a c ity S tru c k c u . Y d . 2 .0 c u . Y d

C a p a c ity Rounded cu. Yd.

E n g in e

V e h ic le O p e ra tio n

2 .5 c u . Y d .

1 1 H .P . Honda

3 /4 & 1 T o n P ic k -u p T ru c k s (O v e r 8 ,5 0 0 lb s . G V W R )

Exclusive adjustable-height poly spinner/chute assembly accommodates both pickup truck and flatbed applications. It features a rust-proof highperformance 15 1/2â&#x20AC;? poly spinner.

The POLY-CASTER spreader line combines a low- maintenance, rust-proof, double-wall poly hopper with a smooth, quiet electricdrive system for the ultimate in de-icing performance. It effectively spreads all ice control materials including salt, sand, a salt/sand mix or even wet sand. And the POLY-CASTER spreader comes loaded with more standard features to enhance operator efficiency and convenience.

The entire unit stands on end, making removal from the truck easier and minimizing space required for off-season storage

C a p a c ity

Body L e n g th

Hopper C o n s tr u c tio n

A p p r o x . W e ig h t E m p ty

S p r e a d in g W id th

D im e n s io n s (H x W x L )

S p in n e r S iz e

C o n veyo r W id th

M a te r ia l

V e h ic le A p p lic a tio n

1 .5 C u . Y d s

P o ly th y le n e

550 Lbs.

P o ly th y le n e

660 Lbs.

2' - 40'

108" x 63" x 44"

1 5 1 /2 " P o ly

1 6 3 /4 "

S a n d & S a lt

3 /4 & 1 -T o n

2' - 40'

117" x 63" x 44"

1 5 1 /2 " P o ly

1 6 3 /4 "

S a n d & S a lt

1 .8 C u . Y d s

3 /4 & 1 -T o n

The FISHER SPEED CASTER 2 tailgate spreader offers the snow and ice removal professional a spreader that's ideal for parking lots of any size. It's easily removed from the vehicle without using tools.

2-stage delivery system that can handle all types of de-icing material, even wet sand!

Variable speed control is standard on Speed Caster 2

Capable of spreading all types of material, including wet sand, the SPEED-CASTER 2 features a a 16" belt conveyor for positive feed of all materials. The high strength poly hopper has a capacity of 10 cu. ft. spreader height along with the feed gate and deflectors are all adjustable. The SPEEDCASTER 2 also features a 1/3 HP 12V DC motor, 15 1/2" spinner and center high-mounted stoplight (CHMSL).

T a ilg a te S p re a d e r

Ap p ro x . W e ig h t E m p ty

C a p a c ity

S p re a d in g W id th

D im e n s io n s (H x W x L )

P o lyth yle n e

235

1 0 .0 cu . F t.

5' - 20'

46" x 46" x 24"

S p in n e r S ize M o to r S ize 1 5 1 /2 "

1 /3 H P

M a te ria l

V e h ic le Ap p lic a tio n

S a n d & S a lt

3 /4 & 1 -T o n

Safety Orange Powder Coat Finish Exclusive Extreme-Duty H-Beam Design 3" Inside Posts and 3/8" Side Plates Extra Durable Lower Posts Bottom support posts are fully welded giving the posts the exceptional strength. This keeps the post higher off the ground. In case of accidental roll back, the bottom post does not get destroyed. Extreme-Duty Upper Posts Upper post support tubes eliminate the need for costly channel rolls. They are fully seam-welded and spaced for maximum effectiveness in lending support to the overall strength of the pusher. Extreme-Duty Wear Shoes 1Â˝" x 10" Rubber Compound Cutting Edge

6 0 2 -2 6 0 2 1 1 0 6 0 2 -2 6 0 2 1 1 2 6 0 2 -2 6 0 2 1 1 4

W id th 10' 12' 14'

A p p ro x . W e ig h t (L b s .) 1 ,1 2 5 1 ,4 5 0 1 ,6 0 0

M a c h in e A p p lic a tio n (M in .) 5 0 H .P . 7 0 H .P . 8 5 H .P .

M a c h in e W e ig h t (M in .) 1 2 ,0 0 0 L b s . 1 5 ,0 0 0 L b s . 1 6 ,0 0 0 L b s .

Safety Orange Powder Coat Finish Durable and corrosion resistant. Extra Durable Inside Posts Fully welded for exceptional strength. 5" x 3/4" Extreme-duty Wear Shoes Made from abrasion resistant steel for far greater wear life. 1" x 8" Premium Rubber Compound cutting edge. Universal Quick coupler attachment. Precision-Rolled Moldboard Enhances rolling of snow Three 4" Channels For maximum support.

Loader

Safety Orange Powder Coat Finish Durable and corrosion resistant. Extreme-Duty Wear Shoes Exclusive Extreme-Duty H-Beam Design 12" push beam for superior support. Extra Durable Lower Posts Snow Pushers Extreme-Duty Upper Posts 3" Inside Posts and 3/8" Side Plates Help prevent damage to sides from accidental impact during extreme operation. 1 1/2" x 10" Rubber Compound Cutting Edge The right edge for all your needs.

ScoopDogg

602-2601112 602-2601114 602-2601116 602-2601118 602-2601120

W id th 12' 14' 16' 18' 20'

Ap p ro x . W e ig h t (L b s .) 2,200 2,400 2,600 3,000 3,600

6 0 2 -2 6 0 3 1 0 8 6 0 2 -2 6 0 3 1 1 0

W id th 8' 10'

950 1 ,1 2 5

4 6 H .P . 7 0 H .P .

M a c h in e W e ig h t (M in .) 5 ,5 0 0 L b s . 7 ,0 0 0 L b s .

100 120 125 140 170

H .P . H .P . H .P . H .P . H .P .

M a c h in e W e ig h t (M in .) 13,000 16,000 25,000 30,000 45,000

L b s. L b s. L b s. L b s. L b s.

Safety Orange Powder Coat Finish Durable and corrosion resistant. Universal Quick coupler attachment. 3" X 3 3/4 " Extreme-duty Wear Shoes Made from abrasion resistant steel for far greater wear life. Heavy precision-rolled Moldboard Enhances rolling of snow. Extra Durable Inside Posts Fully welded for exceptional strength. 1" x 6" Premium Rubber Compound cutting edge.

Two 4" Channels For maximum support. A p p ro x . W e ig h t M a c h in e A p p lic a tio n (L b s .) (M in .)

M a c h in e Ap p lic a tio n (M in .)

602-2604106 602-2604108 602-2604110

W id th 6' 8' 10'

Compact Ap p ro x . W e ig h t (L b s .) 400 500 600

M a c h in e Ap p lic a tio n (M in .) 30 H .P . 40 H .P . 50 H .P .

M a c h in e W e ig h t (M in .) 2,500 L b s. 3,500 L b s. 4,500 L b s.

VXF Series Snow Plows

The VXF takes the toughness and reliability of the EX Series and puts it in a V-Plow. Regenerative hydraulics give you the speed you need. Double-acting cylinders mean REAL back dragging is standard. The trip edge mechanism ensures smooth operation. • Integral Power Unit uses all standard SAE cartridge valves for ease of service and troubleshooting. • Poppet valves and regenerative hydraulics provide maximum speed. • Easy to use foot pedal mounting & adjustable jack mechanism. • Reiliable and easy to service extension spring trip edge design. • 1/2" cutting edge with replaceable center edges.

• 1/2" cutting edge with replaceable center edges. • Fast wing action with easy to use hand held controller. • Tough, heavy duty robotically welded construction. • Super bright plow lights with double stud mounts. • Brushed heavy duty stainless moldboard. • Center cap and deflectors for excellent snow containment.

•1/4” Laser Cut Steel Ribs w/2” Cross Tube & HD Channel spreads load across components not connection points •Power Unit/Hydraulics full size SAE standard cartridge valves, oversized 3/8“ rubber hoses, integral valve manifold •Quick Attach/Detach Mounting easy to use over center linkage operated locking pins with foot pedal •Lift Arm - 35 degree travel provides exceptional snow stacking. H.D. 2” x 6” lift cylinder •Poly Snow Deflector is standard on all VX plows •70 Degree Attack Angle provides excellent scraping, rolling & throwing action •Stainless Steel tough corrosion-free moldboard •Plow Lights - powerful dual beam halogen lights w/secure double post mounts •Digital Controller provides comfortable one hand operation w/oversized glove friendly buttons •Adjustable/Removable Jack Stand - maximum flexibility for a wide range of mounting conditions and surfaces •Countoured Lift Frame for greater ground clearance •Double Angle Cylinders for REAL backdragging are standard •Wire Reinforced Blades Guides are standard

29” Height at Center, 37” Height On The Ends P low

V X F85 (8 1 /2 F t.)

V X F95 (9 1 /2 F t.)

B lade Width

102"

114"

S .S .

B lade M ate rial B lade T hickne ss Angle C ylinde rs

0.105" 0.105" 1 1/2" x 1 1/2" x 1 3/4" x 12" 1 3/4" x 12"

Lift C ylinde r

2" x 6"

K ingpin S iz e

Width At Angle

88"

99"

T rip S prings

R ibs

D e fle ctor

S tandard

We ight W/O M ount #

978 lbs.

998 lbs.

C utting E dge

1/2" x 6"

# W e ig h t N o t in clu d in g tru ck m o u n t, typ ica l w e ig h t 40 - 80 lb s.

VXF Series Snowplow Parts

VXF Series Replacement Parts

Hydraulically expanding wings add a full 24” to your plowing width •1/4” Laser Cut Steel Ribs w/2” Cross Tough Stainless 10 Feet of plow in Tube & HD Channel spreads load across Steel corrosion components not connection points an 8 foot package. free moldboard •Quick Attach/Detach Mounting - easy to use over center linkage operated locking pins with foot pedal. •Lift Arm - 35 degree travel provides exceptional snow stacking. H.D. 2” x 6” lift cylinder •70 Degree Attack Angle provides excellent scraping, rolling and throwing action. •1 1/2” x 12’ Angle Cylinders deliver greater angling force than standard cylinders •Plow Lights - powerful dual beam halogen plow lights with secure double post mounts •Digital Controller provides comfortable 1-hand operation w/glove friendly buttons

W id th

W id th At An g le

B la d e H e ig h t

120"

104"

31"

W e ig h t B la d e B la d e An g le L ift K in g p in T r ip T r ip C u ttin g Le ss M a te r ia l T h ic k n e s s C ylin d e r s C ylin d e r S iz e R ib s S p r in g s S tyle Edge M o u n t D e fle c to r S ta in le s s 10, S te e l .1 0 5 " 2 D ia g o n a l 6 F u ll 5 /8 " x 6 " 1 0 8 4 lb s . S ta n d a r d 2" x 12" 2" x 6" 1 1 /8 "

Call And Ask About Prices On Plows & Installation

SnowDogg HD

Shoe s C ast Ir o n

Poly Snow Deflector Standard

Heavy-duty plow, based on the EX design and weight optimized for use on1/2-ton plow ready pickup trucks.

SnowDogg EX Extreme-duty plow designed for unmatched durability and performance, designed for 3/4-ton & Super Duty trucks. •1/4” Laser Cut Steel Ribs w/2” Cross Tube & HD Channel spreads load across components not connection points •Power Unit/Hydraulics full size SAE standard cartridge valves, oversized 3/8” rubber hoses, integral valve manifold •Quick Attach/Detach Mounting easy to use over center linkage operated locking pins with foot pedal •Lift Arm - 35 degree travel provides exceptional snow stacking. H.D. 2” x 6” lift cylinder •Adjustable/Removable Jack Stand maximum flexibility for a wide range of mounting conditions and surfaces •Wire Reinforced Blades Guides are standard on HD/EX plows •Plow Lights - powerful dual beam halogen plow lights with secure double post mounts

Stainless Steel Moldboard Tough Stainless Steel Corrosion Free Moldboard P low Width Width At Angle B lade H e ight B lade M ate rial

H D 75 (7 1/2 Ft.) 90" 78" 29" S tainle ss S te e l

E X 75 (7 1/2 Ft.) 90" 78" 31" S tainle ss S te e l

E X 80 (8 Ft.) 96" 83" 31" S tainle ss S te e l

E X 85 (8 1/2 Ft.) 102" 88.3" 31" S tainle ss S te e l

E X 90 (9 Ft.) 108" 93.5" 31" S tainle ss S te e l

B lade T hickne ss Angle C ylinde rs Lift C ylinde r K ingpin S iz e R ibs T rip S prings T rip S tyle C utting E dge

.105" 1 1/2" x 12" 2" x 6" 1 1/8" 9 4 Full 3/8" x 6"

.105" 1 1/2" x 12" 2" x 6" 1 1/8" 9 4 Full 1/2" x 6"

We ight Le ss M ount D e fle ctor S hoe s

665 lbs. S tandard C ast Iron

730 lbs. S tandard C ast Iron

750 lbs. S tandard C ast Iron

770 lbs. S tandard C ast Iron

790 lbs. S tandard C ast Iron

Perfect for 1/2-Ton Trucks! Flared wings are designed for excellent snow movement and plowing efficiency

•1/4” Laser Cut Steel Ribs w/2” Cross Tube & HD Channel spreads load across components not connection points •Quick Attach/Detach Mounting - easy to use over center linkage operated locking pins w/foot pedal •Double Angle Cylinders for REAL backdragging •Contoured Lift Arm - 35 degree travel provides exceptional snow stacking and greater ground clearance •70 Degree Attack Angle provides excellent scraping, rolling and throwing action •Plow Lights - powerful dual beam halogen plow lights with secure double post mounts •Digital Controller provides comfortable 1-hand operation w/glove friendly buttons

W id th W id th At An g le B la d e H e ig h t

7 1 /2 ' (9 0 " ) 78" 2 6 " /3 3 "

B la d e M a te r ia l B la d e T h ic k n e s s An g le C ylin d e r s L ift C ylin d e r K in g p in S iz e R ib s T r ip S p r in g s T r ip S tyle C u ttin g E d g e

S ta in le s s S te e l .0 7 5 " 1 1 /2 " x 1 3 /4 " x 1 2 " 1 1 /2 " x 6 " 1" 6 4 Edge 3 /8 " x 6 "

W e ig h t L e s s M o u n t D e fle c to r Shoe s

7 0 0 lb s . O p tio n a l O p tio n a l

Power Unit/Hydraulics full size SAE std cartridge valves, oversized 3/8” rubber hoses •Quick Attach/Detach Mounting easy to use over center linkage operated locking pins with foot pedals •2 Stress Optimized Trip Springs provide up to 85 degrees of smooth moldboard tripping action •Adjustable/Removable Jack Stand - maximum flexibility for a wide range of mounting conditions •Snow Deflector is Standard on all 3 models •3/8” Cutting Edge equals more time on the road and less time in the shop. •Plow Lights - powerful dual beam halogen plow lights with The MD plow secure double post mounts •Bright Plow Lights takes all the with double stud mounts great features of •Lift Arm - 35 degree travel provides the EX series and exceptional snow stacking puts them on •1 1/2” x 10” Angle Cylinders

Half the weight, all the quality.

Tough Stainless Steel corrosion free moldboard

your SUV or light duty truck.

P lo w M D 68 M D 75 M D 80

W id th 80" 90" 96"

B lad e H e ig h t 24" 24" 24"

T h ickn e ss 0.075" 0.075" 0.075"

An g le C ylin d e rs 1 1/2" x 10" 1 1/2" x 10" 1 1/2" x 10"

L ift C ylin d e rs 1 1/2" x 6" 1 1/2" x 6" 1 1/2" x 6"

K in g p in S iz e 1" 1" 1"

W id th At An g le 71" 79" 83"

R ib s 6 8 10

S p rin g s 2 2 2

C u ttin g W e ig h t (w /o Edge M o u n t) 3/8" x 6" 1 1/2" x 6" 3/8" x 6" 1 1/2" x 6" 1/2" x 6" 1 1/2" x 6"

Plow Parts

Plow Parts 35

Plow Parts

Plow Parts 37

•Quick Attach/Detach Mounting easy to use over center linkage operated locking pins with foot pedal •Adjustable/Removable Jack Stand maximum flexibility for a wide range of mounting conditions and surfaces. •1/4” Laser Cut Steel Ribs w/2” Cross Tube & HD Channel spreads load across components not connection points

Typical Application: Medium Duty Trucks, 14,000 - 27,000 GVWR

W id th 10' (120")

W id th At An g le 104"

B lad e H e ig h t 31"

B lad e B lad e An g le L ift K in g p in M ate rial T h ickn e ss C ylin d e rs C ylin d e r S iz e S tain le ss S te e l

.105"

2" x 12"

2" x 6"

1 1/8"

Poly Storage Box / Bin

•Stackable •5.8 cubic feet •Stainless steel hinge •Durable, corrosion free construction •Hand holds for ease of carrying •Padlockable for security (lock sold separately) •36" wide x 24" deep x 20" tall

Professional Grade Walk Behind Spreaders •Capacity: 1.5 Cu. Ft. •Frame Construction: Steel •Weight: 42 lbs. •Spreading Width: 3 - 24 Ft. •Spinner: 9” Poly •Dimensions: 31.5” H x 26.5” W x 40” D •Capacity: 1.5 Cu. Ft. •Frame Construction: Stainless Steel •Weight: 42 lbs. •Spreading Width: 3 - 24 Ft. WB200 •Spinner: 9” Poly •Dimensions: 31.5” H x 26.5” W x 40” D •Capacity: 2.5 Cu. Ft. •Dimensions: 35” H x 44” W x 45” D •Frame Construction: Steel/Stainless •Spreading Width: 28 Ft. •Weight: 112 lbs. •Spinner: Drop Spreader

T rip C u ttin g W e ig h t S p rin g s T rip S tyle E d g e L e ss M o u n t D e fle cto r

R ib s 10, 2 are d iag o n al

F u ll

5/8" x 6"

1084 lb s.

S tan d ard

Shoe s C ast Iro n

605-9001001 Shovel

605-9031110 Scoop

602-PW22 Pro Wings Pro-Wings provide an additional 20” of blade width with minimal increase in plow weight. Problem areas such as parked cars or moving snow across a parking lot becomes more manageable!

Plowing time can be reduced by 25-50%!

Poly •Fits: Most 8’ Beds •1.6 Cu. Yd. Cap. (6’ Model) •Double Wall Poly Construction •Integral Steel Window Protector Steel & Stainless Steel •12 Gauge Steel Or Stainless Steel Material •Black Powder Coat Finish or Stainless Steel •Fits: Most 6’ & 8’ Beds •1.5 Cu. Yd. Cap. (6’ Model) •2.0 Cu. Yd. Cap. (8’ Model)

DUMP INSERTS

STANDARD FEATURES

•Tailgate Chains •20’ Battery Cables •Power Up & Power Down •1.5Kw motor (3 H.P. max) for Hydraulic Pump •Payload capacity: 6,000 lbs. max. •Dump angle: 0 - 45 Degrees •Includes Manual Safety Bar •Teethered Control Box with 9’ Cord •Grease Fitting/Holes in Pivot Points •Includes Body-Up Indicator Kit •Black Powder Coat Structural Steel Frame •Double Pivoting and Removable Steel Tailgate •3/4” Diameter Tailgate Hinge Pins

Optional Replacement Tailgate Spreader

•All S.S. Construction won't rust or corrode •Spreads from 4' to 25' of rock salt, free flowing granular materials or chemicals •Includes in-cab, independent variable spinner speed control and auger control •Includes dual-flight augers with mixing tines •Two augers, 5" O.D. x 2.4" I.D. x 20" •14" poly spinner •Weight: 280 lbs. •Overall dimensions: 64.5" W x 31" H x 16.5" D

TGS03 Tailgate Spreader

The NEW TGS03 combines the robustness of an auger-driven V-Box spreader with the simplicity and easy mounting of a tailgate spreader. The open-auger design gives contractors the option to spread a variety of materials typically limited to V-Box spreaders. •Capacity: 8 cu.ft. •3 - 30 ft. spreading width •2" receiver hitch mounting w/horiz. & vert. adjustment, no bedrail drilling (patent pending) •12-Volt DC dual shaft gear motor (patent pending), .4 HP •12" polymer spinner •Horizontal auger feed mechanism •Variable speed controller w/vibrator switch •Polyethylene/steel/stainless steel construction

C a p a c it y

S p r e a d in g M a t e r ia l

8 C u . F t.

B u lk S a lt : 5 0 /5 0 S a lt /S a n d M ix

S p r e a d in g W id t h 3

- 30 F t.

V e h ic le Ap p lic a t io n

C h u te

W e ig h t

O v e r a ll H e ig h t

O v e r a ll W id t h

O v e r a ll L e n g th

H oppe r W id t h

H oppe r L e n g th

1 /2 & 3 /4 T on T rucks

N /A

178 Lbs.

45"

38"

30"

38"

28"

The TGS07 combines the robustness of an auger-driven V-Box spreader with the simplicity and easy mounting of a tailgate spreader. The open-auger design gives contractors the option to spread a variety of materials, typically limited to V-Box spreaders.

TGS07 Tailgate Spreader

•Class 4 Receiver Hitch Mounting with horizontal & vertical adjustment, no bed rail drilling •Vehicle Application: 3/4-Ton & 1-Ton Trucks •Capacity: 11 cu. ft./ 825 Lbs. (Salt or Sand) •12-Volt DC dual shaft gear motor •Horizontal auger feed mechanism •Polyethylene/steel construction •Variable speed controller with vibrator switch •9" Polymer spinner •Front and rear pivoting hinged lid for easy filling C a p a c it y

S p r e a d in g M a t e r ia l

11 C u . F t.

B u lk S a lt : 5 0 /5 0 S a lt /S a n d M ix

S p r e a d in g W id t h 3

- 30 F t.

V e h ic le Ap p lic a t io n

C h u te

W e ig h t

O v e r a ll H e ig h t

O v e r a ll W id t h

O v e r a ll L e n g th

H oppe r W id t h

H oppe r L e n g th

1 /2 & 3 /4 T on T rucks

N /A

190 Lbs.

46"

53"

3 1 .5 "

51"

26"

Under tailgate mounting allows normal use of dump body Feature of Hydraulic Models

Features of Electric Models

•Available in 304 Stainless Steel or Carbon • Available in 304 Stainless Steel Steel w/ Orange Powder Coat Finish • Two ultra-quiet 12-volt DC •Models with Direct Drive operation reduces direct-drive motors power the number of moving parts, assuring auger and spinner, and are dependable service encased in a heavy-duty •Standard Discharge or Side housing. The wiring harness is Discharge available constructed of 8-gauge •Low-speed, high-torque orbital motors. automotive wire. An in-cab •Spreader assemblies come with 18" console features independent polyurethane spinner and dump controls for the auger and spinner. body mounting plates •Spreader assemblies come with •Stainless steel model includes auger motors, 14" polyurethane stainless steel mounting brackets spinner and mounting plates

92440S S A S p read in g M aterial S p read in g W id th V eh icle Ap p licatio n W eig h t F ram e

92420A

92420S S A

B u lk S alt; 50/50 S alt/S an d M ix 4 - 25 F eet 96" W id e D u m p B o d ies 575 L b s. S tain less S teel

B u lk S alt; 50/50 B u lk S alt; 50/50 S alt/S an d M ix S alt/S an d M ix 4 - 40 F eet 4 - 40 F eet 96" W id e D u m p 96" W id e D u m p B o d ies B o d ies 529 468 L b s. Pow er LCbos. ated C arb o n S teel S tain less S teel 2 In d ep en d en t 2 In d ep en d en t D irect D rive D irect D rive (2) 12 V D C D irect H yd rau lic M o to rs H yd rau lic M o to rs P o w er S o u rce D rive 6" Au g er w / 3/8" 6" Au g er w / 3/8" 6" Au g er w / 3/8" F eed M ech an ism flig h tin g flig h tin g flig h tin g S p in n er 14" 18" 18" C o n tro ller V ariab le S p eed N /A N /A O verall H eig h t 31.25"/34.25 31.25"/34.25 31.25"/34.25 O verall W id th 96" 96" 96" O verall L en g th 25" 18" 18"

Features of both hydraulic and electric versions • Under tailgate mounting allows normal use of dump body without interference from spreader • Rugged 10-gauge trough has 3-point hinged bottom cover that provides easy access to entire auger assembly for easy, one-person cleanout • 6" Auger is supported by 1-1/4" steel shaft ends and has 3/8" flighting to the discharge port delivering a continuous, consistent flow of spreading material

SHPE0750 & SHPE100 Electric Drive Sand and Salt Spreaders Can be used with utility vehicles, 1/4, 1/2 and 3/4-ton trucks The SHPE Series SaltDogg ® spreaders are completely self-contained, ultra–durable spreader units designed for ice and snow control & are available from 3/4 yard to 6 yard capacity. The complete assembly mounts easily on utility vehicles, pickups, dump, platform & utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals & private contractors.

M ode l C apacity (S truck)

S H P E 0750 0.75 C u. Y d.

S H P E 1000 1.0 C u. Y d.

B ulk S alt; 50/50 B ulk S alt; 50/50 S alt/S and S pre ading M ate rial S alt/S and M ix M ix S pre ading Width 5-30 Fe e t 5-30 Fe e t Ve hicle Application 3/4 & 1-T on T rucks 1/2 & 3/4-T on T rucks We ight 520 Lbs. 343 Lbs. O v e rall Width 48" 48" O v e rall Le ngth 63.2" 71.5" H oppe r Width 48" 48" H oppe r Le ngth 53" 68" 1/4" B lack P owde r 1/4" B lack P owde r C oate d T op S cre e n C oate d S te e l S te e l S tandard S tandard Vibrator (200 Force Lbs.) (200 Force Lbs.) 2.5" S tainle ss S te e l 2.5" S tainle ss S te e l S cre w T ype Auge r Fe e d M e chanism S cre w T ype Auge r S pinne r 12" 12" In cab w/ind. Auge r, spinne r & v ibrator Variable S pe e d C ontrolle r Vibrator S witch controls

Electric Drive Sand and Salt Spreaders The SHPE Series SaltDogg ® spreaders are completely self-contained, ultra–durable spreader units designed for ice and snow control & are available from 3/4 yard to 6 yard capacity. The complete assembly mounts easily on utility vehicles, pickups, dump, platform & utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals & private contractors.

SHPE1500

SHPE2000

M ode l C apacity (S truck) S pre ading M ate rial S pre ading Width C hute We ight O v e rall H e ight O v e rall Width O v e rall Le ngth H oppe r Width H oppe r Le ngth T op S cre e n C ov e r Vibrator Inv e rte d V H oppe r P owe r S ource S pinne r C ontrolle r

S H P E 2000 S H P E 2500 2.0 C u. Y d. 2.2 C u. Y d. B ulk S alt; 50/50 B ulk S alt; 50/50 S alt/S and M ix S alt/S and M ix 5-30 Fe e t 5-30 Fe e t S tandard Adjustable 560 Lbs. 680 Lbs. 40" 44" 47.8" 48" 100" 114.2" 47.8" 48" 96" 98.5" 1/4" B lack P owde r 1/4" B lack P owde r C oate d S te e l C oate d S te e l H .D . P oly-Vinyl T arp H .D . P oly-Vinyl T arp S tandard S tandard (200 Force Lbs.) (200 Force Lbs.) N /A S tandard D ouble Wall P olyme r D ouble Wall P olyme r (2) 12V D C D ire ct D riv e (2) 12V D C D ire ct D riv e 12" 14" Variable S pe e d Variable S pe e d Vibrator S witch Vibrator S witch

•Capacity: 1.5 Cu. Yds •Weight: 520 Lbs •12” Spinner •Standard and Extended Chute •Vehicle Application: 3/4 and 1-Ton Trucks •Material Flow/Output – Salt, 2.2 cu. ft./minute; Salt/Sand, 1.3 cu. ft./minute. •In Cab console with independent controls for the auger, spinner and vibrator •Mounting: 4 Point Tie Down System •A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage •Capacity: 2.0 Cu. Yds •560 Lbs •12” Spinner •Standard and Extended Chute •Vehicle Application: 1-Ton Trucks (Above 10,000 Lbs. GVW) •Material Flow/Output: Salt, 3.2 cu. ft./minute Salt/Sand, 2.3 cu. ft/minute •In Cab console with independent controls for the auger, spinner and vibrator •Mounting: 4 Point Tie Down System •A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage

•Capacity: 2.2 Cu. Yds •680 Lbs. •14” Spinner •Adjustable Chute •Vehicle Application: 1-Ton Trucks (Above 10,000 Lbs. GVW) •Material Flow/Output: Salt, 3.2 cu. ft./minute Salt/Sand, 2.3 cu. t/minute •5.25” stainless steel variable pitch auger •Mounting: 4 Point Tie Down System •A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage

S H P E 1500 1.5 C u. Y d. B ulk S alt; 50/50 S alt/S and M ix 5-30 Fe e t S tandard 520 Lbs. 38" 50.5" 99.7" 50.5" 87.3" 1/4" B lack P owde r C oate d S te e l H .D . P oly-Vinyl T arp S tandard (200 Force Lbs.) N /A D ouble Wall P olyme r (2) 12V D C D ire ct D riv e 12" Variable S pe e d Vibrator S witch

SHPE2250

S H P E 3000 3.0 C u. Y d.

S H P E 4000 4.0 C u. Y d.

S H P E 6000 6.0 C u. Y d.

B ulk S alt; 50/50 S alt/S and M ix 5-30 Fe e t Adjustable 945 Lbs. 52.7" 49.6" 123.7" 48" 114" 1/4" B lack P owde r C oate d S te e l Inte rlocking D ouble D oors S tandard (400 Force Lbs.) N /A

B ulk S alt; 50/50 S alt/S and M ix 5-30 Fe e t S tandard 896 Lbs. 43.5" 74" 114.8" 74" 99.5" 1/4" B lack P owde r C oate d S te e l

B ulk S alt; 50/50 S alt/S and M ix 5-30 Fe e t Adjustable 1344 Lbs. 57" 77" 133.5" 77" 127" 1/4" B lack P owde r C oate d S te e l

N /A 2 S tandard (400 Force Lbs.) N /A

N /A 2S tandard (400 Force Lbs.) S tandard

D ouble Wall P olyme r (2) 12V D C D ire ct D riv e 14" Variable S pe e d Vibrator S witch

P olyme r (2) 12V D C D ire ct D riv e 14" Variable S pe e d Vibrator S witch

Electric Drive Sand and Salt Spreaders

The SHPE Series SaltDogg® spreaders are completely self-contained, ultra–durable spreader units designed for ice and snow control & are available from 3/4 yard to 6 yard capacity. The complete assembly mounts easily on utility vehicles, pickups, dump, platform & utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals & private contractors.

•Capacity: 3.0 Cu. Yds SHPE3000 •Weight: 945 Lbs •14” Spinner

•Vehicle Application: 13,000 Lbs. GVW and Above •Material Flow/Output: Salt, 3.2 cu ft/minute Salt/Sand, 2.3 cu. ft/minute •In Cab console with independent controls for the auger, spinner and vibrator •Mounting: 4 Point Tie Down System •A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage

SHPE4000

•Capacity: 4.0 Cu. Yds •896 Lbs •5.5 Stainless Steel Auger •14” Spinner •Material Flow/Output: Salt, 2.2 cu. ft./minute Salt/Sand, 1.3 cu. ft/minute •Vehicle Application: 15,000 Lbs. GVW and Above •In Cab console with independent controls for the auger, spinner and vibrator •Mounting: 4 Point Tie Down System •A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage

•Capacity: 6.0 Cu. Yds •1,344 Lbs. •14” Spinner •Vehicle Application: Minimum GVW 25,999 Lbs. •Material Flow/Output: Salt, 2.2 cu. ft./minute Salt/Sand, 1.3 cu. t/minute •6” stainless steel variable pitch auger •Mounting: 4 Point Tie Down System •A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage

Electric Drive Sand and Salt Spreaders

Completely self-contained, ultra durable spreader unit designed for ice and snow control. The rugged design allows for use with salt, sand and other materials. The complete assembly mounts easily on pickup, dump and platform trucks making it ideal for municipalities, shopping malls, industries, hospitals and private

1400601S S 2.0 C u. Y d.

14000701S S 1.5 C u. Y d.

B ulk S alt; 50/50 S alt/S and M ix 2-30 Fe e t Adjustable 995 Lbs. 32.1" 47" 110.8" 47" 96" 1/4" B lack P owde r C oate d S te e l O ptional N /A S tandard S tainle ss S te e l

B ulk S alt; 50/50 S alt/S and M ix 2-30 Fe e t Adjustable 682 Lbs. 32.1" 47" 86.8" 47" 72" 1/4" B lack P owde r C oate d S te e l O ptional N /A S tandard S tainle ss S te e l

S tainle ss S te e l (2) 12V D C D ire ct D riv e 12" Variable S pe e d Vibrator S witch

ELECTRIC MOTORS – Two ultra-quiet 12-volt DC direct-drive motors power the conveyor and spinner, and are encased in a heavy-duty housing. The wiring harness is constructed of 10gauge automotive wire. An in-cab console features independent controls for the conveyor and spinner. A 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft secured on the pillow block and motor bearing. Adjustable deflectors allow for complete directional spread control and full or compact spread. Total spread radius ranges from 2' to 30'. The extra wide rear deflector protects the rear and under carriage of the vehicle. STAINLESS STEEL MATERIAL HOPPER – Electrically welded high-quality grade 304 stainless steel components, including: Hopper, Hopper Supports, Hopper Floor, Gussets, Spinner Chute Assembly, Deflectors & Engine Hood. SPINNER CHUTE ASSEMBLY – Chute height can be adjusted by using upper or lower set of holes located on the bottom of upper chute weldment and under internal baffles selectors. Adjustable shaft can be connected in two positions: upper and lower. Two sets of holes are located in upper and lower portions of coupler.

CONVEYOR – The conveyor is made of 12" wide all-steel pintle chain with 3/16" x 3/4" cross bars. FEEDGATE – Lever operated with a friction lock for accurate adjustment.

Stainless Steel V-Box Spreaders With Top Screen & Inverted V Completely self-contained, ultra durable spreader units designed for ice and snow control allowing for use with salt, sand & other materials.

Ask About Spreader & Installation Prices

Mounts on pickups, dump and platform trucks making it ideal for muncipalities, shopping malls, industries, hospitals & private contractors.

•STAINLESS STEEL MATERIAL HOPPER – Electrically welded high-quality grade 304 stainless steel ends and sides sloped at 45° are constructed with channel formed top edges. Vertical supports add extra strength to the unit. The floor is constructed of high-quality grade 304 stainless steel. •CONVEYOR – The conveyor is made of 12" wide all-steel pintle chain with 3/16" x 3/4" cross bars. Chain strength is 11,000 lbs. per strand; 22,000 lbs. total weight. The idler drum has heavy-duty 1" diameter ball bearings. •ENGINE – Heavy-duty 10.5 horsepower Briggs & Stratton idustrial/commercial gas engine. Engine comes equipped with alternator and 12 volt electric starter with in-cab start/stop and electric throttle control (standard). Entire engine is completely protected by the convenient hinged hood. •ELECTRIC THROTTLE CONTROL – Throttle control unit allows for full-range of throttle settings, including idle and full choke, via the in-cab hopper control box. Use of electric throttle control eliminates cable freezing, binding and breaking. Battery included. •FEEDGATE – Lever operated with a friction lock for accurate adjustment.

M odel L e n g th C a p a c ity (S tr u c k )

1400200SS

1400050SS

1400100SS

1400350SS

1 4 0 0 5 50 S S

Id e a l U s e D im e n s io n s (L x W x H ) W e ig h t F e e d M e c h a n is m E n g in e S p in n e r S p r e a d in g W id th C h u te

6' 1 .3 C u . Y d . M e d iu m & H .D . C o m m e r c ia l

8' 1 .8 C u . Y d . M e d iu m & H .D . C o m m e r c ia l

10' 3 .0 C u . Y d . M e d iu m & H .D . C o m m e r c ia l

10' 4 .5 C u . Y d . M u n ic ip a l & C o m m e r c ia l

8 9 " x 4 7 " x 3 2 .5 " 753 Lbs C o n veyo r 1 0 .5 H .P . B & S 1 1 .5 " P o ly 2 -3 0 F e e t S ta n d a r d

1 1 3 " x 4 7 " x 3 2 .5 " 945 Lbs C o n veyo r 1 0 .5 H .P . B & S 1 1 .5 " P o ly 2 -3 0 F e e t S ta n d a r d

1 1 3 " x 4 7 " x 3 2 .5 " 7 6 9 lb s . C o n veyo r 1 0 .5 H .P . B & S 1 1 .5 " P o ly 2 -3 0 F e e t E x te n d e d

1 3 7 " x 4 7 " x 3 2 .5 " 9 1 0 lb s . C o n veyo r 1 0 .5 H .P . B & S 1 4 .0 " P o ly 2 -3 0 F e e t E x te n d e d

C o n tr o l

In -C a b C o n s o le

45" x 70" x 108" 1 ,5 0 0 lb s . C o n veyo r 1 0 .5 H .P . B & S 1 8 .0 " P o ly 4 -3 0 F e e t E x te n d e d V a r ia b le S p e e d C o n tr o lle r

3 /4 & 1 -T o n T r u c k s

V e h ic le A p p lic a tio n

In -C a b C o n s o le H e a v y D u ty F la tb e d H e a v y D u ty F la tb e d O r Long Dum p O r Long Dum p T ru c k s T ru c k s

SP-110 ACCUSPREAD

CAP: 3.0 Cu. Ft.

Utility & Wireless Spreaders SR-210 ACCUSPREAD

CAP: 3.0 Cu. Ft. Compact. Economical. Versatile. SnowEx utility spreaders are the lighter-duty winter Comes with an auger for Spreads bagged ice melters and calcium chloride pellets maintenance solution for everyone from estate spreading bagged rock salt owners to property managers to professional and calcium flake. contractors. The utility spreaders can be mounted to any vehicle such as utility vehicles, ATVs, cars, small pickups, and offer the ideal complement to larger spreaders by being able to cater to more confined applications. Now Available With Wireless Control! Easy as 1-2-3! SR-110 & 210 1. Insert spreader into 2-inch receiver mount and connect standard 7-pin trailer plug. 2. Control speed with push button wireless remote. 3. Start saving money in less than 15 minutes!

SPREADERS

Compact. Precise. One-Person Installation. SnowEx tailgate spreaders cater to everyone from the private operator to commercial contractors and are ideal for maintaining driveways, recreational paths, parking lots & roads. Available in a variety of sizes & mounts to fit most pickups, SUVs & utility vehicles.

Ask About Installation M o d el

325 J u n io r

575 M in i P ro

1075 P ivo t P ro

E m p ty (w eig h t) O verall L en g th O verall H eig h t O verall W id th H o p p er L en g th H o p p er W id th C ap acity S p read in g W id th

79 lbs. 18" 33" 33" 16.5" 33" 3.25 C u. F t. U p to 25'

106 lbs. 20.5" 35" 38" 20.5" 38" 5.75 C u. F t. U p to 40'

141 lbs. 21" 40" 52" 21" 47.5" 10.75 C u. F t. U p to 40'

S p read in g M aterial

B ag g ed R ock S alt B ag g ed R ock S alt & pelletized & pelletized B ag g ed R ock S alt m aterial m aterial D ig ital, selfdiag nosing variable speed controller

D ig ital, selfdiag nosing variable speed controller

S p eed C o n tro l

W eather-resistant variable speed controller

W irin g H arn ess

C om pletely loom ed autom otive style, non-com bustible w ith m olded plug s

M o u n tin g

2" receiever is standard

P ivot, reciever or 3point m ount optional

325 Junior

SnowEx designed the SP-325 for precise spreading in small commercial and private applications. It can spread bagged rock salt and calcium flake up to 25 feet.

575 Mini Pro

SnowEx’s Mini Pro is ideal for small snow and ice contractors, as well as larger snow and ice operations that wish to complement their highercapacity spreaders.

1075 Pivot Pro SnowEx’s SP-1075 Pivot Pro features an auger feed system and a dual variable speed digital controller. Plus, it’s offered with a unique pivot mount option.

Rugged. Effective. User Friendly. SnowEx Bulk Pro spreaders are ideal for contractors who maintain roads, parking lots and driveways. The tailgate models in the Pro line offer a simple and efficient patented 2-stage auger system, and are intended for use with pickups, utility vehicles and tractors.

BULK PRO

Polyethylene hopper - eliminates corrosion Low maintenance - no pulleys, sprockets, chains or belts M o d el E m p ty (w eig h t) O verall L en g th O verall H eig h t O verall W id th H o p p er L en g th H o p p er W id th C ap acity S p read in g W id th

1 5 7 5 B u lk P ro

1 8 7 5 B u lk P ro

160 lbs. 20.5" 34" 38" 20.5" 38" 5.25 C u. F t. U p to 30'

180 lbs. 24" 36" 52" 21" 47" 9.0 C u. F t. U p to 40'

S p read in g M aterial

50/50 S alt/S and, B ulk S alt & S and

S p eed C o n tro l

D ig ital, self-diag nosing variable speed controller

W irin g H arn ess M o u n tin g

C om pletely loom ed autom otive style, non-com bustible w ith m olded plug s P ivot, receiver or 3-point 2" receiever is standard m ount optional

1575 BULK PRO

1875 BULK PRO

The SP-1575 is SnowExâ&#x20AC;&#x2122;s smallest spreader capable of spreading all materials, including bulk salt and sand mixtures. It comes with a 5.25-cubic-foot capacity for demanding snow and ice professionals with more precise spreading needs.

The 1875 Bulk Pro tailgate spreader is capable of spreading all types of materials, including bulk salt and sand mixtures. The 1875 spreader contains an auger feed system, and itâ&#x20AC;&#x2122;s controlled from the cab via dual variable speed digital controller.

SPREADERS Powerful. Economical. Professional Duty. SnowEx Vee Pro spreaders are serious machines for serious contractors. Covering a wide variety of applications, the Vee Pro line includes several V-box style models intended for use with H.D. utility vehicles, short box & standard pickups.

3000 Vee Pro Fits in the beds of both pickups and UTVs.

M o d el E m p ty (w eig h t) O verall L en g th O verall H eig h t O verall W id th F lo o r L en g th F lo o r W id th H o p p er L en g th H o p p er W id th C ap acity S p read in g W id th S p read in g M aterial

6000 Vee Pro

Contains many of the same features as V-Maxx Spreaders

3 0 0 0 V e e P ro

6 0 0 0 V e e P ro

416 lbs. 386 lbs. 77" 77" 27" 36" 48.5" 48.5" 58" 58" 34" 44" 66" 66" 48.5" 48.5" 0.5 C u. Y d. 1.0 C u. Y d. U p to 40' 50/50 S alt/S and w /O F K -20 O ptim um F low K it) & B ulk S alt

7 0 0 0 T o w P ro 985 lbs. 128" 60" 64" N /A N /A 78" 49" 1.4 C u. Y d. U p to 40' A ll M aterials W eather proof independent speed controller

S p eed C o n tro l

D ig ital, self-diag nosing variable speed controller

W irin g H arn ess

C om pletely loom ed autom otive style, non-com bustible w ith m olded plug s

M o u n tin g

P ositive Lock ing M ount w /boltdow n k it and ratchet strap assist

Integ ral trailer

V-MAXX High Capacity. Tough. Powerful. V-Maxx spreaders are THE choice for municipalities and professional contractors catering to larger jobs. Designed to spread virtually any combination of materials, The V-Maxx line intended for use with commercial duty pickups, flatbeds and dump trucks. Snow Exâ&#x20AC;&#x2122;s largest V-Maxx (9500) model is the ultimate big job spreader for municipalities and contractors.

7550

8550

Ideal for any snow and ice professional with a 3/4-ton pickup or larger.

Is a high-capacity salt spreader that can fit in the bed of a 1-ton truck

9300

9500

A fleet friendly salt spreader with high capacity for reducing your number of refills M odel E m p ty (w e ig h t) O ve ra ll L e n g th /D e p th O ve ra ll H e ig h t O ve ra ll W id th F lo o r L e n g th F lo o r W id th H o p p e r/T a n k L e n g th H o p p e r/T a n k W id th C a p a c ity S p re a d in g W id th S p re a d in g M a te ria l

7550

This makes it perfect for large contractors and municipalities looking to minimize material 8550

9300

95 0 0

7 8 0 lb s . 9 9 4 lb s . 9 3 9 lb s . 1 0 5 .5 " 108" 130" 39" 43" 4 5 .5 " 48" 54" 52" 84" 100" 106" 44" 4 9 .5 " 49" 96" 1 0 7 .5 " 1 1 8 .5 " 48" 54" 52" 2 .5 C u . Y d . 3 .0 C u . Y d . 4 .0 C u . Y d . U p to 4 0 ' 5 0 /5 0 S a lt/S a n d m ix, 1 0 0 % c o a rs e s a n d & 1 0 0 % b u lk s a lt (w ith a d d e d in te rio r b a ffle in s id e h o p p e r) 5 5 0 lb s . 8 9 .5 " 34" 49" 66" 44" 78" 49" 1 .4 C u . Y d .

S p e e d C o n tro l

D ig ita l, s e lf-d ia g n o s in g va ria b le s p e e d c o n tro lle r w ith a u to re ve rs e

W irin g H a rn e s s

C o m p le te ly lo o m e d a u to m o tive s tyle , n o n -c o m b u s tib le w ith m o ld e d p lu g s w /s p a re c irc u it (8 5 0 0 , 9 3 0 0 & 9 5 0 0 h a ve s p a re c irc u it)

M o u n tin g

P o s itive L o c k in g M o u n t w /b o lt-d o w n k it a n d ra tc h e t s tra p a s s is t

SPREADER

Flexible. Consistent. Fleet Friendly. SnowEx's replacable tailgate spreader makes the most of available fleets by providing a cost-effective solution for year-round dump truck utilization. Adaptable to a wide range of equipment, the 2400 is ideal for municipalities & professional contractors. E m p ty (w eig h t) 326 lbs. The V-Maxx 2400 is O verall L en g th /D ep th 14" designed for snow and 24" O verall H eig h t O verall W id th 84" ice professional with a F lo o r W id th 84" dump body. Just like all H o p p er/Tan k W id th 84" S p read in g W id th U p to 40' other V-Maxx spreaders, 50/50 S alt/S and M ix, 100% C oarse S and S p read in g M aterial the 2400 series comes & 100% B ulk S alt D ig ital, self-diag nosing variable speed with polyethylene S p eed C o n tro l controllers w /auto reverse construction and C om pletely loom ed autom otive style, noncom bustible w ith m olded plug s W irin g H arn ess independent spinner U niversal m ounting kit to fit m ost dum p M o u n tin g and auger controls. bodies (som e fab. R eq uired)

SPRAYERS

The VSS Series de-icing sprayers feature an exclusive zone-spraying system for spraying straight down, laterally or through a spray wand. Each unit is completely electric-powered and features a cab-Mounted controller for independently adjusting the spray zones. They are a contractorâ&#x20AC;&#x2122;s package for whatever the application needs. Plus, the corrosion-resistant poly tanks include baffles for minimizing liquid surges during travel.

VSS-1000 100 Gallon Capacity

VSS-3000 300 Gallon Capacity

VSS-2000 200 Gallon Capacity

SB1100 11.0 Cu. Ft.

SB1800 18.0 Cu. Ft.

SP85

SD95

SP65

5 0 /5 0 S a n d /S a lt M ix B a g g e d Ic e M e lte rs Bagged Rock S a lt

U tility 210 110

B u lk S a lt

C a lc iu m F la k e C a lc iu m C h lo rid e P e lle ts Sand

325

X X

T a ilg a te 575 1075

X X X X X

MATERIAL COMPATABILITY

1575

P ro S p re a d e rs 1875 3000 6000

X X X X X X X X X X X X X X X X X X X 2

X X X X X X

1 5

X X X X X X

1 5

7000

X X X X X X X

2400

V -M a x x S p re a d e rs 7500 8500 9300

X X

9500

1 ) O F K -0 2 0 O p tim u m F lo w K it. 2 ) G A K -0 2 0 G a te A s s e m b ly K it 3 ) V B R -0 8 0 V ib ra to r K it w /H a rn e s s 4 ) F F K -0 2 0 F re e F lo w K it 5 ) W ith T R K M a te ria l C o n tro l T u b e

Parts Reference Guide Snow Ex Parts

Model

W id th

595-S P 10L 595-S P 12L 595-S P 14L 595-S P 16L 595-S P 18L 595-S P 20L

10' 12' 14' 16' 18' 20'

A p p ro x . W e ig h t 2 ,1 0 0 2 ,2 0 0 2 ,3 5 0 2 ,5 0 0 2 ,7 5 0 2 ,9 0 0

M a c h in e A p p lic a tio n (M in .)

lb s lb s lb s lb s lb s lb s

1 .2 5 yd lo a d e r 1 .5 yd lo a d e r 2 yd lo a d e r 3 yd lo a d e r 3 .2 5 yd lo a d e r 3 .2 5 yd lo a d e r

Snow C a p a c ity 12 15 18 21 23 26

yd yd yd yd yd yd

Quick Change Attachment System •Fits any machine Fully Welded Construction •10 Yr. Limited Warranty •Engineered for strength & push capacity 1 1/2” x 10” Rubber Cutting Edge •Squeeges surface •Safe on all conditions •Easy to operate & maintain

SPL Loader Model

Moldboard 48”, Sideplates 48“ x 48”

FPL Loader Fold-Out Model

•Maximum manueverability from site to site through traffic safely by "folding" the Sno Pusher unit to reduce impact to motorists •Fold Out Sno Pushers also enable excellent movement through smaller spaces on job sites. •Squeegees surface - Rubber edges work best in wet, slushy snow because it acts as a squeegee to clean the surface better than steel edges. Model

W id th

595-F P 14L 595-F P 16L 595-F P 18L

13'10" 15'10" 17'10"

A p p ro x . W e ig h t

3 ,4 5 0 lb s 3 ,6 5 0 lb s 3 ,8 5 0 lb s

M a c h in e A p p lic a tio n (M in .) 1 .5 yd lo a d e r 2 .5 yd lo a d e r 3 .5 yd lo a d e r

Snow C a p a c ity 1 9 yd 2 1 yd 2 3 yd

IST Backhoe Model

SPB Backhoe Models

Moldboard 36”, Sideplates 36” x 36”

Fully Welded Construction •10 Yr. Limited Warranty •Engineered for strength & push capacity Quick Change Attachment System •Fits any machine 1 1/2” x 10”’ Rubber Cutting Edge •Easy to operate & maintain •Squeeges surface •Safe on all conditions

Moldboard 40” Sideplates 40” x 52”

Model

W id th

A p p ro x . W e ig h t

M a c h in e A p p lic a tio n (M in .)

Snow C a p a c ity

5 9 5 -S P 1 0 B 5 9 5 -S P 1 2 B 5 9 5 -S P 1 4 B

10' 12' 14'

1 ,3 0 0 lb s 1 ,4 5 0 lb s 1 ,6 0 0 lb s

B ackhoe - 2x4 B ackhoe - 4x4 1 .2 yd B a c k h o e

9 yd 1 1 yd 1 3 yd

5/8” Steel Cutting Edge •Scrapes hard pack Fully Welded surfaces clean Construction •Designed to perform •10 Yr. Limited Warranty safely and reliably •Engineered for strength •Smooth non shocking & push capacity tripping action M o d el

595-IS 12B

W id th 12'

Ap p ro x. W eig h t M ach in e (L b s.) Ap p licatio n (M in .) 1,650

4 x 4 B ackh o e

Snow C ap acity 12 yd

Switchblade SBL Loader Model

SPS Skid Steer Model Moldboard 36”, Sideplates 36” x 36”

The benefit of a rubber edge pusher & a steel edge pusher combined in one unit

Fully Welded Construction 4 Wear Shoes Moldboard 48” •Hardened AR Abrasion Resitant Plate Sideplates •Bolt on, Replaceable 48“ x 48” Dual Cutting Edge System Rubber Edge Model: •1 1/2” x 10”, reversible •Squeeges surface Steel Trip Edge Mode: •5/8“ Hardened Steel Cutting Edge •Scrapes hard pack surfaces clean M ode l 595-S B 14L 595-S B 16L

W id th 14' 16'

Ap p r o x. W e ig h t (L b s.) 2,938 3,125

M ach in e Ap p licatio n (M in .) 2 yd L o ad e r 3 yd L o ad e r

Snow C ap acity 18 yd 21 yd

SPC Compact Models Moldboard 28”, Sideplates 28“ x 28”

Fully Welded Construction •10 Year Limited Warranty •Engineered for strength and optimal pushing capacity Universal Skid Steer Coupler •Direct Connect to Skid Steer A quick change post receptacle is also available. Wear Shoes •Hardened AR Abrasion Resitant Plate •Bolt on, Replaceable 1” x 6” Rubber Cutting Edge •Squeeges surface, Safe on all conditions •Slotted to Adjust •Reversible •Easy to operate and maintain M ode l 595-S P 08S 595-S P 10S 595-S P 12S

Ap p r o x. W id th W e ig h t 8' 800 lb s 10' 950 lb s 12' 1,100 lb s

M ach in e Ap p licatio n (M in .) 46 - 70 H P S kid S te e p 70 + H P S kid S te e p 85 + H P S kid S te e p

PBS Pull Back Models Moldboard 36”, Sideplates 36” x 36”

Fully Welded Construction Fully Welded Construction •10 Year Limited Warranty •10 Year Limited Warranty •Engineered for strength and optimal •Engineered for pushing capacity strength and optimal 1” x 6” Rubber Cutting Edge pushing capacity •Easy to operate and maintain •Squeeges surface •Safe on all conditions •Reversible Universal Wear Shoes Skid Steer •Hardened AR Abrasion Resitant Plate Coupler •Bolt on, Replaceable •Direct 1” x 6” Rubber Cutting Edge Connect to •Squeeges surface, Safe on all conditions Skid Steer •Slotted to Adjust •Reversible Ap p ro x. W e ig h t M ach in e Model

595-S P 08C

W id th 8'

A p p ro x . W t. (L b s .) 480

M a c h in e A p p lic a tio n (M in .) 40 H P /3500 L b s.

Snow C a p a c ity 4 yd

Snow C ap acity 7 yd 9 yd 13 yd

M ode l 595-P B 08S 595-P B 10S

W id th 8' 10'

(L b s.) 975 1,130

Ap p licatio n (M in .) 70+ H P S kid S te e r 85+ H P S kid S te e r

Snow C ap acity 7 yd 9 yd

VPS Heavy Duty V-Plow Heavy Duty, fully welded construction Universal Skid Steer Coupler Steel Cutting Edge •5/8” x 8” steel edges Wear Shoes •5/8” thick shoe

M ode l 5 9 5 -VP 0 5 S 5 9 5 -VP 0 6 S

W id th 5' 6'

Ap p r o x . W e ig h t (L b s .) 510 575

IST Loader Model

Fully Welded Construction •10 Yr. Limited Warranty •Engineered for strength & push capacity Quick Change Attachment •Fits any machine Moldboard 52” 5/8” Steel Cutting Edge Sideplates •Scrapes hard pack 48” x 62” surfaces clean Plow comes •Designed to perform safely & reliably complete •Smooth non shocking tripping action and ready to use

SBS Switchblade Skid Steer Models Moldboard 36”, Sideplates 36“ x 36”

Fully Welded Construction •10 Year Limited Warranty •Engineered for strength and optimal pushing capacity Dual Cutting Edge System Rubber Side: 1 1/2” x 10” reversible •Squeegees surface, safe on all conditions Steel Trip Edge Model: 5/8” steel •Scrapes hard pack surfaces clean M o d el

595-S B 08S 595-S B 10S

W id th 8' 10'

Ap p ro x. W eig h t (L b s.) 1,000 1,188

M ach in e Ap p licatio n (M in .)

46 - 70 H .P . S kid S teer 70+ H .P . S kid S teer

W id th

A p p ro x . W t. (L b s .)

M a c h in e A p p lic a tio n (M in .)

Snow C a p a c ity

5 9 5 -IS 1 2 L 5 9 5 -IS 1 4 L

12' 14'

2 ,4 0 0 2 ,5 5 0

1 .5 yd lo a d e r 2 yd lo a d e r

1 6 yd 1 9 yd

SBB Switchblade Backhoe Models Moldboard 36”, Sideplates 36“ x 36”

Snow C ap acity 7 yd 9 yd

IST Skid Steer Models

Fully Welded Construction Moldboard 40” •10 Year Limited Warranty •Engineered for strength and optimal Sideplates pushing capacity 40“ x 52” Universal Skid Steer Coupler •Direct Connect to Skidsteer •Quick change attachment also available. Steel Trip Edge Model •Scrapes hard pack surfaces clean •Designed to perform safely & reliably. Wear Shoes •Hardened AR Abrasion Resitant Plate •Bolt on, Replaceable 5/8” Steel Cutting Edge M odel

W id th

A p p ro x . W e ig h t (L b s .)

M a c h in e A p p lic a tio n (M in .)

Snow C a p a c ity

5 9 5 -IS 0 8 S 5 9 5 -IS 1 0 S

8' 10'

950 1 ,1 0 0

4 6 -7 0 H P S k id S te e r 7 0 + H P S k id S te e r

8 yd 1 0 yd

M odel

Fully Welded Construction •10 Year Limited Warranty Dual Cutting Edge System Rubber Edge Model - 1 1/2” x 10” •Squeegees surface, safe on all conditions Steel Trip Edge Model - 5/8” steel •Scrapes hard pack surfaces clean •Designed to perform safely and reliably. M odel

W id th

A p p ro x . W e ig h t (L b s .)

5 9 5 -S B 1 2 B 5 9 5 -S B 1 4 B

12' 14'

1 ,8 1 3 2 ,1 0 0

M a c h in e A p p lic a tio n (M in .) S n o w C a p a c ity 4 x 4 Backhoe 1 .2 Y d . B a c k h o e

1 1 yd 1 3 yd

Parts & Options Overview

Rubber Cutting Edges

Wear Shoes

•Flexible, resilient •Excellent squeegee characteristics •Provides long life. •Formulated specially for Sno-Pusher use P a rt #

D e s c rip tio n

5 9 5 -R P 2 2 5 0

6 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 5 1

7 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 5 2

8 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 5 3

9 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 5 4

1 0 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 0 2

1 0 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 0 3

1 2 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 0 4

1 4 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 0 5

1 6 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 0 6

1 8 ' R u b b e r C u ttin g E d g e

5 9 5 -R P 2 2 0 7

2 0 ' R u b b e r C u ttin g E d g e

F it: S P L L o a d e r, S P C C o m p a c t, S B S S w itc h b la d e S k id S te e r, S B L S w itc h b la d e L o a d e r, S B B S w itc h b la d e B a c k h o e , S P B B a c k h o e & S P S S k id S te e r M o d e ls

Steel Cutting Edges P a rt #

D e s c r ip tio n

5 9 5 -R P 2 7 6 6

6 ' S te e l C u ttin g E d g e

5 9 5 -R P 2 7 6 7

8 ' S te e l C u ttin g E d g e

5 9 5 -R P 2 7 5 9

1 0 ' S te e l C u ttin g E d g e

5 9 5 -R P 2 7 6 0

1 2 ' S te e l C u ttin g E d g e

5 9 5 -R P 2 7 6 1

1 4 ' S te e l C u ttin g E d g e

P a rt #

D e s c rip tio n

P ric e

5 9 5 -R P 2 7 6 2

1 6 ' S te e l C u ttin g E d g e

5 9 5 -R P 2 7 6 3

1 8 ' S te e l C u ttin g E d g e

F it: S B L S w itc h b la d e L o a d e r , S B B S w itc h b la d e B a c k h o e , IS T B a c k h o e , IS T L o a d e r & S B S S w itc h b la d e S k id s te e r M o d e ls

•Extremely wear resistant •Hardened AR plate, industry standard •Provides long life P art #

D escrip tio n

595-R P 2010

S tan d ard W ear S h o e fo r S P L & S B L

595-R P 2011 595-R P 2012 595-R P 2050 595-R P 2090 595-R P 2091

S tan d ard W ear S h o e fo r S B S , S B S , S P S & S P B S tan d ard W ear S h o e fo r S P C S u p er D u ty W ear S h o e S P L S elf L evelin g S h o e S P L S elf L evelin g S h o e S P B

595-R P 2777 595-R P 2785

L eft S teel S id e W ear S h o e F o r S B L , IS T L o ad er, R ig h t S teel S id e W ear S h o e F o r S B L , IS T L o ad er

595-R P 2778

L eft S teel S id e W ear S h o e F o r S B S , S B B , IS T B ackh o e & IS T S kid Steer

595-R P 2786

R ig h t S teel S id e W ear S h o e F o r S B S , S B B , IS T B ackh o e & IS T S kid Steer

IST Springs P a rt #

D e s c rip tio n

5 9 5 -R P 2 7 5 7

6 ' IS T S p rin g

5 9 5 -R P 2 7 5 8

8 ' IS T S p rin g

5 9 5 -R P 2 7 5 0

1 0 ' IS T S p rin g

5 9 5 -R P 2 7 5 1

1 2 ' IS T S p rin g

5 9 5 -R P 2 7 5 2

1 4 ' IS T S p rin g

5 9 5 -R P 2 7 5 3 5 9 5 -R P 2 7 5 4

1 6 ' IS T S p rin g 1 8 ' IS T S p rin g

Level Gauge & Binder Kits P a rt #

D e s c rip tio n

5 9 5 -R P 1 2 0 0

L e ve l G a u g e

5 9 5 -R P 1 0 0 0

B in d e r K its fo r S B L , S P L & IS T S k id s te e r

5 9 5 -R P 1 0 0 1

B in d e r K its fo r S B B , S P B & IS T Backhoe

5 9 5 -R P 1 0 0 2

B in d e r K its fo r S P C

Full line of front plow hitches available!

Full Trip - One Way

•GVWR: 30,000 - 60,000 Lbs. •5,10, 20 degree cutting edge attack angle •10 ga. moldboard, (5) 1/2” tapered ribs •4” x 4” x 3/4” bottom angle •Blasted and Powder Coated •Push Height: 14” •100% Welded

•GVWR: 30,000 - 60,000 Lbs. •5,10, 20 degree cutting edge attack angle •Sizes: 36” - 41” & 48” height •4” x 4” x 3/4” bottom angle •Blasted and Powder Coated •Push Height: 14” •100% Welded

•4” x 4“ x 3/4” bottom angle •35 degree cutting edge attack angle •10 ga. moldboard, (5) 1/2” tapered ribs •Adjustable moldboard pitch with 9 positions from 9 to 35 degrees •100% Welded •GVWR: 30,000 - 60,000 lbs. •Blasted and Powder Coated •Push Height: 14”

Reversible Torsion Trip Edge

•Allows plow to maintain snow load when tripped •Built in Level Lift, 100% Continuously Welded •Adjustable Moldboard Pitch •Powdercoated Moldbard & Pushframe •Heavy Duty, 4-Point Pushframe

•100% Welded Extra Deep Moldboard •GVWR: 30,000 60,000 Lbs. •Dual compression trip spring assemblies •Stress proof machined pins •(2) 3” x 10” Double acting power reverse cylinders with cushion valve •45” & 55 Height •10 gauge roll formed moldboard

Compression Trip Edge

•Allows plow to maintain snow load when tripped •Reduces damage to equipment and surface roadways •H.D. 4 point push frame •Built-in level lift •Adjustable moldboard pitch •Adjustable Spring Tension •3 piece trip edge - standard

“J” Series Poly and Slotted Trip Plows Available! 56

Single & Double Function Wings

Front, Mid & Rear Mount Options •Single or Double function wings •Single Adjustable Spring Cushioned Push Arm with Safety Shear Pin •One Piece 1/2” Moldboard Reinforcement Ribs •Rear Push Mount Installed Above Frame for Increased Ground to Rear Mount Clearance •Free Float to Follow Contour of Road or Shoulder •No Additional Cab to Body Spacing Required for Rear Push Mount •100% Welded Moldboard

Junior Wing •27” Intake Height and 28” Discharge Height on Moldboard •Two Double-Acting Cylinders for Direct Lift of Toe and Heel •Direct-Lift Front Wing Post •Wing Requires Two 4-Way Valves with 2100 P.S.I. Relief for Heel Raise to Operate (Not included) •Wing Provided with Under Frame Cross Tube Mounting and Hardware •Moldboard is Shotblasted and Powder Coat Painted Orange •Mounting Hardware Powder Coat Black •10 Gauge Moldboard •3/8” One Piece,Tapered, Flame Cut Ribs

Many Options Available

The Ultimate All Season Radial Dump Body with a Live Floor! Designed for the Harshest Conditions! Ease of Maintenance and Durability Designed Throughout!

Many Options Available

•3/16” Mild Steel Body •3/16” Formed Dirt Shedding Top Rail •3/16” Removable Chain Shields (For Ease of Maintenance) •1/4” Long sills 14” in Height with Formed Cross sills •1/4” Replaceable Floor, Supported on 12” centers •2” Drive and Idler Shafts with 2” Heavy Duty Bearings •1 1/4” Heavy Duty Chain Adjusters •Full Opening Double Acting Tailgate •Case Hardened Sprockets to 40-48 Rockwell •34” Wide Conveyor with 1/2” x 1 1/2” Bar Flights on 4 1/2” Centers •Heavy Duty Pintle Chain with a 26,000 Minimum Tensile Strength Rating •Telescopic Double Acting Nitrided Hoist Cylinder •Receiver Tube Mounted Rear Spinner Assembly

Under Tailgate Spreader Stainless and Mild Steel

6” and 9” augers available!

•HD 1 1/2” 4 Bolt Flange Bear •1/4” End plates •Mild steel powdercoat •7 ga. trough and lid •5” x 2” tube for rear support •96” wide, 9” auger •Economical way to utilize existing dump body for maximum returns winter and summer •Capable of spreading free flowing material from 4’ to 40’ •All welds are 100% continuously welded to prevent corrosion pockets •Anti-flow plate to restrict material from free flowing when unit is stopped •Captive latching system for lid and trough •Full opening top lid with easy access

•Available in various heights •3” x 3” x 1/4” minimum tube-type frame •The tailgate is constructed of a 3/16” mild steel body with 1/4” end plates •Full width auger located below the dump body floor •Available in various heights •Agitator has 6, 4” x 4” x 1/4” interrupters angularly welded •Self leveling spinner is equipped with an 18” spinner disc •Auger has 3/8” flighting with a 4” pitch •Both auger and agitator are direct driven by low speed high torque hydraulic motors •Interior seams are 100% continuously welded

•Quick attach/detach, self-leveling mounting hardware. •Hi-Temp Straight belt with flexible stainless splicings. •Spreads a wide variety of material which include all types of aggregate and hot mix asphalt. •Performs shoulder maintenance, rut-filling, asphalt-patching and ice control. •Available in a 12” or 18” conveyor width. •Bi-directional conveyor provides driver side or passenger side discharge. •Caged-design drive and idler pulleys. •Poly support rollers with stainless steel shaft, which eliminates the need for bearings. •Heavy Duty Bearing and belt adjustment.

Options 4’ Extension with caged rollers, Heavy duty bearings and Hi-temp straight belt

Large Replacement Tailgate Spreader (Shown with Pre-Wet Tailgate System)

Rear Cross Conveyor Spreader

•Sand bag attachment •Spinner assembly •Reversing Valve •Berm Master •Corrosion-Resistant Stainless Steel •Light package--stop, turn & tail with 3-light cluste.

Berm Chute

DVS Spreader •1/4” Replaceable Floor, Supported on 12” Centers •1 1/4” Heavy Duty Chain Adjusters •3/8” Mild Steel Body •Case Hardened Sprockets to 40-48 Rockwell •Heavy Duty Pintle Chain with a 26,000 Minimum Tensile Strength Rating •Telescopic Double Acting Nitrated Hoist Cylinder •Full Opening Double Acting Tailgate •Receiver Tube Mounted Rear Spinner Assembly •3/16” Formed Dirt Shedding Top Rail •34” Wide Conveyor with 1/2” x 1 1/2” Bar Flights on 4 1/2” Centers •3/16” Removable Chain Shields (For Ease Of Maint.) •1/4” Long Sills 14” in Height with Formed Cross Sills •2” Drive and Idler Shafts with 2” Heavy Duty Bearings

Pre-Wet Systems Available Pre-Wet Systems: LDS-333 Electric Liquid Dispensing System Electric Close Loop System LDS-455 Electric Liquid Dispensing System Hyd. Open or Close Loop System Nozzles

Plumbing Fittings

Pump

Many Options Available Clearing The Way To The Future

Control & Harness

•For snow & ice control & shouldering work •1" x 20" high carbon moldboard •10', 11' & 12' lengths actuated by 3.5" cylinders •Available in a fully hydraulic model with power angle Tanks - Available in different •Two, 4" double acting, power angle cylinders volumes and shapes with chrome plated piston rods •Adjustable scraping angle, up to a full 45° •Contour shaped hold down blocks match the radius of the circle for increased strength

Modular Design MCV V-Box Combination •Powder Coated Orange or Available in 201 or 304 Stainless Steel •Screw Adjustable Gate Jack •10 Gauge Hopper Shell with 45˚ Sloped Sides or Optional 12 ga. •100% Continuously Welded •3/16” Replaceable Floor w/ Material Options •5/8” Rod Lift Loops, Bolt-On

Model shown is 201 Stainless Steel

Unit

•Capable of De-Icing, Pre-Wet and Spreading Granular at the Same Time •14’ Corroision-Resistant Stainless Steel V-Box •180 gallons each tank, 720 total gallons •3 Lane Granular Spreader •Pre-Wet (Hydraulic or Electric) Granular, Liquid •Monroe Liquid Control Anti-Ice, De-Ice, •Dust Control Optional Dust Control & •9.13 Yard Capacity Prewet •3 Lane Liquid Anti-Icing •Ground base pumping stations, Salt slurry generators

Anti-Icing Prevents Bonding of Snow, Ice & Frost to Pavements! Equipment •Monroe Closed-Loop Ground Speed Controls •1000, 1235, 1600, 1635 & 1850 Gallon Baffled Tanks •Stainless Steel Spray Bars •Right Hand, Left Hand and/or Center Lane Applicators •Dump Body Slip-In Units or Chassis Mounted Units •Trailer Mounted Units Offered •Application Rates up to 55 MPH •Directable Side Nozzles •Quick Attach Nozzles •Reduce Overall Winter Operation Costs •Use Less Rock Salt •Environmentally Friendly

SelfStoring/ Unloading Skid System The Salt Slurry Generator will:

•Save you money! •Reduce the amount of salt usage per lane mile •Maximize the efficiency of your road salt •Reduce residual salt build-up on roadways •Increase salt volume by 25% •More grain per square foot •Brine process activates faster, thus melting snow & ice faster •More materials stay on the road surface •Helps create safer roads faster

General Specs

•Hopper & Chute Assembly •Roller-type mill & frame •Hydraulic motors •Winch kit •Air Actuated roller engagement cylinder •Rotationally-adjustable Spinner Disc Assembly •Direct Injection Nozzles for Liquid Application

Behind The Cab Prewet Tank Kit

Standard System Includes: •Dual 120 gallon poly tanks •6” x 8” x 4” sump area •.350” Minimum wall thickness •10” Fillwell, lid with lanyard •(9) 1.25” FNPT molded in ports •(4) Tube type tank baffles •Powder coated mild steel framework •Four (4) 3” wide nylon straps with stainless steel draw bolts •Two (2) formed mounting brackets to attach to chassis frame rail •Overall dimensions: 78” L x 17.5” W x 64” High •Requires only 20” of open space behind the cab

Features

Para-Glide Wing Post in •NEW and Improved Free Flotation Resting Position. Para-Glide Reduces Road Shock and Wing Post in Full Float Vibration to the Vehicle •Heavy Duty Construction with Position. The Monroe High Tensile Steels being Used to Para-Glide Double Function Reduce Weight of Assembly Patrol Wing is a multi-function and Increase Durability wing that is capable of atrolling •Longer Service Life and Fewer snow to widen shoulders or Repairs with Increased Safety perform limited benching. •All Hydraulically Operated - No Cables •14” Full Float with 18” of Lift •Faster Cycle Times

Para-Glide Wing Post In Resting Position

Western Type Plow Parts R

Western R Type Plow Replacement Parts 63

Western Type Plow Parts R

Hiniker 速 Type V-Plow Parts

Hiniker Type Steel Straight Blade Plow Parts 速

Aftermarket Replacement Parts For Meyer Snowplows R

Part #: 1306152 Replacement Gear Pump For E-47 Replaces OEM Part #: 15026

N.I. - Not Illustrated L o c. 1 2 3 4 5 6 7 8

P art # 1306195 1306200 1306182 1306180 1306184 1306190 1306175 1306176

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 N .I. N .I. 25

1306040 1306055 1306035 1306045 1306060 1306025 1306205 1306210 1306212 1306050 1306065 1306030 1306183 1306007 1306105 1306220 1306225 1306145

D escrip tio n O -R ing S eal, S haft O -R ing , 1 1/2" I.D . O -R ing , 1 1/8" I.D . O -R ing , 3 1/2" I.D . W asher, N ylite 5/16" P acking C up P acking C up "B " S olenoid V alve A ssem bly "C " S olenoid A ssem bly "A " S olenoid A ssem bly "B " C oil, R ed W ire "C " C oil, G reen W ire "A " C oil, B lack W ire W iper S leeve E -60 S leeve E -60 H "B " V alve C artridge "C " V alve C artridge "A " V alve C artridge O -R ing, 1 15/16" I.D . M otor, 4 1/2" C rossover V alve K it B asic S eal K it M aster S eal K it C rossover V alve K it

R ep laces O E M P art # 15054 15356 15392 15393 15431 15358 15430 15381 15433 15357 15382 15380 15432 15610 15254 15456 551G 5001 15162 15198 8473 15606 15581 15326 15194 5119

Loc. 1

Part # 1306005

D escription M otor, 3" 12 VD C

R eplaces O EM Part # 15054

1306015

"A" Solenoid Valve Assem bly, 3/8" Stem

15356

3 4 N .I. N .I. N .I. 5+ 6

1306016 1306020 1306035 1306025 1306030 1306130 1306055

"A" C oil "A" Valve "A" Solenoid, N ew Style (5/8" Stem ) "A" C oil, N ew Style (5/8" Stem ) "A" Valve, N ew Style (5/8" Stem ) "A" Seal Kit "C " Solenoid Valve Assem bly

15392 15393 15661 15659 15660 15431 15358

1306060

"C " C oil

15430

8 9+ 10 11 12 13+ 14+ 15+

1306065 1306135 1306040 1306045 1306050 1306140 1306145 1306150

15381 15433 15357 15382 15380 15432 15610 15254

N .I. 17 18 19 20 21

1306155 1306165 13606170 1306175 1306180 1306100

"C " Valve "C " Seal Kit "B" Solenoid Valve Assem bly "B" C oil "B" Valve "B" Seal Kit C rossover Seal Kit Seal Kit M aster Seal Kit (Includes Kits D enoted By +) G asket D rive End C ap & Bushing C up Packing O -R ing For Electro T ouch Pressure R elief Valve W /Bushing

22 23

1306105 1306185

C rossover Valve Kit Pum p Shaft Seal

15606 15581

24 25

1306153 1306186

Strainer C over & Seal Assem bly

15326 15194

26 27 28

1306205 1306173 1306174

W iper R am , Electro T ouch 6" Stroke R am , Electro T ouch 8" Stroke

5119 15208 15206

15456 551G 5001 15162 15198 8473

Part #: 1306202 Replacement Gear Pump For E-60 Replaces OEM Part #: 15729

N.I. - Not Illustrated

Meyer High Carbon Steel R

Diamond 速 High Carbon Steel

Blizzard

Meyer Rubber R

Snow Way High Carbon Steel

Steel Highway Punch

See Page 16 For Boss Plow Cutting Edges See Page 21 For Fisher Plow Cutting Edges 71

D50

Detachable Snowblowers D55

Capacity: up to 2,750 tons/hour Casting distance: up to 46 m (150 ft.) Overall width: 110 - 114 In. Overall height: 139 - 157 In. Power: from 250 hp to 275 hp Pump: direct drive Easy replaceable blades Conveyor: 2 heavy duty augers

Capacity: up to 2,750 tons/hour Casting distance: up to 46 m (150 ft.) Overall Width: 114 In. Overall height: 139 - 157 In. Power: from 250 hp to 275 hp Pump: direct drive Easy replaceable blades Conveyor: Ribbon (serrated)

D60

D65

Capacity: up to 3,000 tons/hour Casting distance: up to 46 m (150 ft.) Overall width: 110 - 114 In. Overall height: 139 - 157 In. Power: 300 to 400 hp at 2,200 RPM Pump: direct drive Easy replaceable blades Conveyor: 2 heavy duty augers

Capacity: up to 3,800 tons/hour Casting distance: up to 46 m (150 ft.) Overall width: 114 In. Overall height: 139 - 157 In. Power: from 300 hp to 400 hp Pump: direct drive Easy replaceable blades Conveyor: Ribbon (serrated)

Turn Your Favorite ATV/UTV Into Your Most Valuable Tool!

•Available in 48", 54", 60", 66", 72" and 78" blade widths, these ATV/UTV snow plows are a full 14 1/2" high. •Quick Installation - Mount installs in minutes and can be completely removed in seconds. Slide push frame into front mount and secure with a pin. •Easy to Lift - Easily lifted by one person. Lower the blade, plow until you're finished, then lift the blade back to transport position. •Use your blade 365 days a year with endless landscaping possibilities. •Ideal for corners and sidewalks. Lower the blade, plow until you're finished and then raise the blade. It's that easy!

•No Extra Lights - The practical design does not block headlights in plow or transport position. •Most front mounts install in about 30 minutes using pre-existing holes. Push frame slides into front mount and secures with a pin. •Large Capacity - Flexible box ends keep snow from spilling out the sides while the blade actually lifts snow for higher piles •Turf Friendly - Built in trip edge won't scratch concrete, brick or black top, tear up grass surfaces or remove gravel.

Available In 84” & 96” Widths

•Approx. Blade Weight: 110 lbs •1” rubber cutting

ACCESS ®

The Original Roll-Up Cover rolls open in seconds and stores neatly behind the cab, allowing full use of the truck‛s bed with no need to remove.

The cover is fully sealed on all four sides, forming a tight barrier between the truck bed and cover. Cargo is safe and secure with the patented Auto-Latch II™, a dual-locking system that locks and releases with one smooth action.

Never leave the cab again to install or remove side plates! •Innovative “Keyhole” design allows the operator to pick

up and drop off the unit using boom movement and keeping it locked while in use. •The best of both worlds...an angle blade and a snow pusher all in one! •Pick up and drop off the FastTach in seconds without leaving the cab! •Combine angle plowing and snow Attach your snow pusher pushing in one smooth operation! in just 5 seconds! •No moving parts, hydraulics, electronics or pins! •Available for Ultra 96, 108 and 120 (8', 9' and 10') and Alpha 10.

Serious productivity has been lost with skid steer loaders simply due to lack of traction...the power is there, but skid steers can’t get it to the ground! Precious time is wasted spinning wheels rather than working.

Wolf Paws! The incredible winter tires from SnowWolf! The tread pattern on WolfPaw are designed for snow, unlike most others!

Equipped with Wolf Paws, your skid steer will feel like a whole new animal! Instead of spinning and glazing over the surface every time you ask it to move, it will respond instantly and with authority to your request, biting in and getting traction like nothing before. Do you want the absolute ultimate? Try Wolf Paws with studs! Even glare ice shudders just thinking about these animals! They will out-perform anything in winter conditions.

T ire S p e c s

P ly R atin g L o ad R an g e S ectio n W id th Tread W id th Tread D ep th , E d g e Tread D ep th , C en ter

8 p ly D 8.7" 7.0" 1" + 18/32

Eco Thaw TM Works When Others Won‛t

12 Lbs. 25 Lbs.

50 Lbs.

1-Ton Super Sack Parking Lot Grade Non-Screened • •

•Fast Acting •Prevents Re-freezing

•Works Effectively Day Or Night •

Also Available in 10 Lbs.

The Best Back Drag On The Market Increase Profit

Increase productivity by 30% Faster and Cleaner results Saves time = Less time per job Reduced Truck Wear

Easy Install

30 Mintues Or Less Install bolts in existing holes on most plows

Powder Coated

•Remove Compacted Ice & Snow •Remove Old Carpet Padding & Glue •Scrape Garage Floors & Work Areas •Wide Blade For Fast Work •Long Lasting Powder Coat Finish •Replaceable Blade •All Steel Construction •Self Sharpening •Special Design to Lengthen Blade Life •Incredibly Strong, Flexible SpringSteel Blade Conforms to Surface •Longer Handle Relieves Back Strain

The Razor-thin, yet incredibly strong, Spring-Steel blade makes it the best Ice Chopper/Scraper on the market. You have to try it to believe it!

RS-614XR AstroStart ® remote car starter and security systems are designed for vehicles, but their primary benefits of convenience, comfort and security were developed first and foremost to meet our customers needs. With a complete range of remote car starters and security available, AstroStart ® customers are sure to find the product that most suits their needs.

RS-624

Two way remote starter with up to 2,000 feet of range.

•One 4-button two-way LED transmitter •One 1-button one way companion transmitter •Programmable runtime (2, 4, 8 or 18 min) •Reset run time by remote transmitter •Automatic defogger activation •Engine start/stop with continuous mode and door lock capability •Gas, diesel and hybrid engines compatible •Limited lifetime warranty

RSS-2524

Two way LED remote starter and alarm with 2,000 feet of range.

•One 4 button two-way transmitter with LED and beeper confirmation •One (1) 4 button one way companion transmitter •Transmission range up to 2000 feet •Low temp activation by remote transmitter •Reset run time by remote transmitter (2, 4, 8, 18 minutes) •Low-temp selection by remote transmitter •Car finder and panic mode

One way remote starter with up to 2,000 feet of range. •One 4-button one-way transmitter •One 1-button one-way companion transmitter •Programmable runtime (2, 4, 8 or 18 min) •Automatic defogger activation •Engine start/stop with continuous mode and door lock capability •Gas, diesel and hybrid engines compatible •Limited lifetime warranty

RS-721

Two way remote starter offering 1,500 feet of range.

•One 1 button two-way LED transmitter •Up to 1,500' of range* •Automatic defogger activation •Built-in programmable relay •Gas, diesel and hybrid engines compatible •Programmable runtime (2, 4, 8 or 18 min) •Limited lifetime warranty •Tachless capability

RSS-5225

Two way LCD remote starter and alarm with 1 mile of range.

•One, 2-way, ergonomic LCD 5 button remote control •Compatible with most gas, diesel and hybrids •Built-in rechargeable battery with up to 30 day battery life, recharges with any mini USB cable or the included charger •Built-in door lock relays with auto lock capability •Built-in anti-grind and anti-theft relay Status button confirming the state of the vehicle •Limited lifetime warranty •900 MHz, with up to 1 mile range

Auto Systems seat heaters can be installed in nearly any vehicle with cloth or leather interior. The seat heater pads adhere to the seat foam under your seat covers and are undetectable unless switched on. •HEATS UP IN SECONDS Low •INSTALLS WITHOUT DETECTION Setting •EVEN HEAT DISTRIBUTION •BUILT DURABLE & TESTED SAFE •DUAL BUILT-IN THERMOSTATS High MAINTAINCONSISTENT Setting TEMPERATURES •TWO LARGE HEATING PADS FOR THE SEAT CUSHION & BACKREST •DUAL TEMPERATURE SETTINGS: LOW SETTING UP TO 115 °F/ HIGH SETTING UP TO 130 °F •ILLUMINATED ROCKER SWITCH •PERFECT FOR BOTH LEATHER & CLOTH SEATS •AVAILABLE FOR CARS, TRUCKS, SUVs, MOTORCYCLES, BOATS, RVs, ATVs, AND MORE •BACKED BY A 3 YEAR / 36,000 MILE LIMITED WARRANTY

RoadWatch SS Safety System

Features the most technologically advanced early warning system of road and air temperatures in the industry. A new state-of-the-art system continuously monitors and displays air and road temperatures to a digital monitor mounted on the instrument panel. RoadWatch SS is designed to give drivers advance notice of potential road freezing before problems arise.

OnSpot is D.O.T. approved in all states including mountainous chain contol areas of Colorado and California.

•Permanently mounted so the vehicle is always prepared. •Reduces conventional chain mounting/removing. •Eliminates wheel well damage from broken conventional chains. •OnSpot Chains last longer as they are used only when needed. •OnSpot is Designed to fit vehicles from 1/2 ton pickups to class 8 tractor trailers, both with and without air brakes.

Lifetime Warranty

Timbren has proven to be reliable even in areas where the heaviest snowfalls occur. Timbren Ride Quality products are specified by municipal, state and highway departments for all snow removal equipment.

Whether you use a pickup to clear a small driveway or a class 8 highway truck with a wing blade, Timbren has a suspension enhancement system designed to provide a safe and level ride for plowing snow in the toughest of environments.

What Is Timbren?

Timbren is a supspension product which enhances a vehicleâ&#x20AC;&#x2122;s empty ride quality, while providing protection against overloading, road shock, bottoming out, swaying and broken springs. Timbren also prevents against front end nose diving, providing a smooth, level ride even with heavy loads. They are presently used on thousands of vehicles throughout the world. Maintain a level and worry free ride by installing Timbren Hollow Rubber Spring Kits on your Van, Truck or SUV.

These high performance suspension kits are specified on most state, county & provincial transport equipment for snow plowing. Many snowplows are also equipped w/very high center of gravity salt spreaders carrying heavy loads that induce sway. The rear suspension enhancement system will improve roll stiffness and absorb road shock.

Simplest To Maintain.....

There are no air lines or fittings to leak. Just bolt the kit on and you are all set for a lifetime of trouble free service.

Simplest To Install..... There are no holes to drill, no air lines to to route and can be installed in minutes using basic hand tools

Simplest To Use ......

Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Trouble/Maintenance Free Satisfaction Guaranteed Limited Lifetime Warranty

Haul Heavy Loads With Ease Eliminate Sag & Sway Improve Handling

HIGHLY RECOMMENDED BY PROFESSIONALS AND GOVERNMENTS FOR ALL SNOW REMOVAL EQUIPMENT TO GET THE JOB DONE.....

Timbren Suspension Enhancement Systems are moounted betwee the truck chassis and the axle. They work in conjunction with the existing suspension to improve the ride of the vehicle and to protect the springs against overloading, road shocks, bottoming out, sway & spring failure. There are front and rear SES kits for nearly every truck & SUV.

We can get you the right Timbren for your Ford, GMC, Dodge, Toyota, Honda, Isuzu, Jeep, Mazda, International, Sterling, Peterbilt or Nissan Pickup, Cab & Chassis or SUV!

Lifetime Warranty OVER 350 SPECIFIC APPLICATIONS AVAILABLE!

Easy To Install Timbren SES Kits require only basic tools for installation. They can be mounted in a few minutes by any garage or by the customer.

Ye a r

2 WD

4W D

F ro n t

Re a r

F ro n t

Re a r

2 0 0 9 -1 3 2 0 0 9 -1 3 2 0 0 6 -0 8 2 0 0 6 -0 8 2 0 0 2 -0 5 1 9 9 4 -0 1 2 0 0 3 -1 3 1 9 9 4 -0 2 2 0 0 3 -1 2

DF 15004B DF 15004B DF 15004B DDF 974A DF 15002C DF 15002A DDF 974A DF 25002 DDF 974A

DR1500DS DR1500DQ DR1525H4 DR2500CA DR2500CA DR1525H2 DR2500CA DR1525H2 DR3500CA

DF 15004B DF 15004B DF 15004B DF 25004B DF 15004C DF 25004B DF 25004B DF 25004B DF 25004B

DR1500DS DR1500DQ DR1525H4 DR2500CA DR2500CA DR1525H4 DR2500CA DR1525H4 DR3500CA

2 0 0 0 -0 2 1 9 9 4 -9 9

DDF 974A DDF 974A

DR3500B DR3500B

DF 25004B DF 25004B

DR3520 DR3500

D o d g e P ic k u p s 1 /2 , 3 /4 & 1 -T o n RA M 1500 RA M 1500 RA M 1500 RA M 1500 RA M 1500 RA M 1500 RA M 2500 RA M 2500 RA M 3500

R e g u la r C a b , E x c lu d in g A ir S u s p e n s io n C re w & Q u a d C a b , E x c lu d in g A ir S u s p e n s io n R e g u la r & Q U A D C A B M E G A CA B

RA M 3500, 2500HD RA M 3500, 2500HD

G M C - C h e v ro le t P ic k u p s 1 /2 , 3 /4 & 1 -T o n

1 5 0 0 S IE R R A , S IL V E R A D O , D E N A L I E xc lu d in g XF E 1 5 0 0 S IE R R A , S IL V E R A D O XF E 1 5 0 0 S IE R R A , S IL V E R A D O , D E N A L I - R e g u la r C a b o r 3 d o o r 1 5 0 0 S IE R R A , S IL V E R A D O , D E N A L I - W T , E xt e n d e d o r C re wC a b 1500 A V A LA NCHE LS T , LT , LT Z 1 5 0 0 A V A L A N C H E G V W 7 , 0 0 0 lb s o r le s s 1 5 0 0 H D S IE R R A , S IL V E R A D O in c l. C la s s ic C10, C1500, K 10, K 1500 2 5 0 0 S IE R R A , S IL V E R A D O , 1 5 0 0 H D , 2 5 0 0 H D 2 5 0 0 S IE R R A , S IL V E R A D O , 1 5 0 0 H D , 2 5 0 0 H D 2500 A V A LA NCHE G V W 8600 Lb . C20, C2500 3 5 0 0 S IE R R A , S IL V E R A D O 3 5 0 0 S IE R R A , S IL V E R A D O C30, C3500 K 3 0 , K 3 5 0 0 wit h f ro n t c a s t lo we r c o n t ro l a rm K 3 0 , K 3 5 0 0 wit h f ro n t s t a m p e d lo we r c o n t ro l a rm

F o rd P ic k u p s 1 /2 , 3 /4 & 1 -T o n

F 150 F 150 F 150 F 150 F 150 F 250 F 250 F 250 F 250 F 250 F 250 F 250 F 250 F 350 F 350 F 350 F 350

S V T Raptor

E xc lu d in g H E R ITA G E , L IN C O L N M A R K L T H E R ITA G E in c lu d in g S u p e r C re w S U P E R D U TY S U P E R D U TY S U P E R D U TY wit h s n o w p lo w p re p p a c k S U P E R D U TY wit h s n o w p lo w p re p p a c k S U P E R D U TY wit h o u t s n o w p lo w p re p p a c k S U P E R D U TY wit h o u t s n o w p lo w p re p p a c k wit h T o rs io n B a r F ro n t S u s p e n s io n S U P E R D U TY , F 2 5 0 H D S U P E R D U TY S U P E R D U TY wit h s n o w p lo w p re p p a c k S U P E R D U TY wit h o u t s n o w p lo w p re p p a c k

2 0 0 7 -1 3 2 0 0 9 -1 3

G M F K 15CA G M F K 15CA

G M RCK 15S G M RCK 15E

G M F K 15CA

G M RCK 15S

1 9 9 9 -0 6

G M F K 25S

G M RCK 15S

G M F K 15A

G M RCK 15S

1 9 9 9 -0 6 2 0 0 7 -1 3 2 0 0 2 -0 6 2 0 0 1 -0 7 1 9 8 8 -1 9 9 9 2 0 1 1 -1 2 1 9 9 9 -1 0 2 0 0 2 -0 6 1 9 8 8 -9 9 2 0 1 1 -1 3 2 0 0 1 -1 0 1 9 8 8 -0 0 1 9 9 6 -0 0 1 9 8 8 -9 6

G M F K 25S G M F K 15B G M F K 15A G M F K 25S G M F C1588H G M F K 25D G M F K 25S G M F K 25S G M F C1588H G M F K 25D G M F K 25S G M F C1588H

G M RCK 15S G M RY S 4 G M RG 25C G M RCK 25S G M RC25HD G M RCK 25D G M RCK 25S G M RS B 4S G M RC25HD G M RCK 25D G M RCK 35S G M RCK 35

G M F K 15A G M F K 15B G M F K 15A G M F K 25S G M F K 35C G M F K 25D G M F K 25S G M F K 25S

G M RCK 25S G M RY S 4 G M RG 25C G M RCK 25S G M RCK 25 G M RCK 25D G M RCK 25S G M RS B 4S

G M F K 25D G M F K 25S

G M RCK 25D G M RCK 35S

G M F K 25S G M F K 35C

G M RCK 35 G M RCK 35

F F 150F F F 150972 F F 150972 F F 350S D2 F F 350S D2 F F 350S D2 F F 350S D2 F F 350S D2 F F 350S D2 F F 150972 F F 350 F F 350S D2 F F 350S D2 F F 350S D2 F F 350

F R1502D F R1502D F R1525HD F R1525HD F R250S DG F R250S DF F R250S DE F R150S DE F R250S DE F R150S DE F R1525HD F R150S DE F R350S DF F R350S DE F R350S DE F R350S DE

F F 150F F F 150F F F 150974A F F 150974A F F 350S DC F F 350S DC F F 350S D4B F F 350S D4B F F 350S D4 F F 350S D4 F F 150974A F F 2504A F F 350S DC F F 350S D4B F F 350S D4 F F 3504A

F R1504R F R1504D F R150D F R1525HD F R1525HD F R250S DG F R250S DF F R250S DE F R150S DE F R250S DE F R150S DE F R1525HD F R250S DE F R350S DF F R350S DE F R350S DE F R350S DE

2 0 0 9 -1 3 2 0 0 9 -1 3 2 0 0 4 -0 8 2004 1 9 9 7 -0 3 2 0 1 1 -1 3 2 0 0 5 -1 0 2 0 0 1 -0 4 1 9 9 9 -0 0 2 0 0 1 -0 4 1 9 9 9 -0 0 1 9 9 7 -9 9 1 9 9 4 -9 8 2 0 0 5 -1 3 1 9 9 9 -0 4 1 9 9 9 -0 4 1 9 9 4 -9 8

L10 Series Super LED Beacons L40 & L41 Super LED Beacons Available Colors

Features: •SAE Class 1 Certified (Amber only). •Super-LEDs are rated for 100,000 hours of operation. •Economical LED Amber beacons. •High and Low dome. •Virtually no EMI radiation. •Polycarbonate base. •Eighteen total flash patterns including steady-burn. Warranty: LED = 5 years. M odel L10H*M L10H*P

T echnology

Profile

Super LED

High

M ount M agnetic Pemanent

Base

Amps 1.0 Peak/ 0.4 Ave

Polycabonate

Features:

VDC 12

Vertex Super-LED Light Features: •For surface mount or internal mount within composite head lamps, cornering lamps and taillight assemblies. •1” mounting hole and backwards compatible to HA238 and standard 1” Hide-A-Way style lamps. •For best performance, LED color must match color of the lens, except for Clear lens. Warranty: LED = 5 year. M ode l VT X 609 VT C 3

T yp e

O u tp u t

Ve rte x S u p e r L E D

0.750 A P e ak, .300 A Av e .

Ve rte x C o mp e tio r S e rie s S u p e r L E D

0.7 A P e ak, .280 A Av e .

Y e s, L amp an d L amp D riv e r

Super-LED 360° Beacons

M odel No.

M ount

L 3 1 H *F

p e rm a n e n t

L 3 1 H *M L 3 1 H *V

m a g n e tic m a g n e tic / s u c tio n

L 3 1 H *F 4

p e rm a n e n t

L 3 2 L *F L 3 2 L *M

p e rm a n e n t m a g n e tic m a g n e tic / s u c tio n p e rm a n e n t

L 3 2 L *V L 3 2 L *F 4

P ro file

Base

H ig h d o m e D ie C a s t A lu m in u m Low dom e

VD C

P atte rn s

25 S can L o ck P atte rn s

L32LAF

•Heavy-duty powder coated die-cast base. •Alternately or simultaneously flash multiple patterns with up to 8 Whelen Super-LED 360° beacons (perm mount). •Includes 4 simulated rotating patterns and cruise light (perm mount). •SAE Class 1 Certified (amber). W a tts

M ount P e rmane nt M agne tic P e rmane nt M agne tic

B ase C ast Aluminum P owde r C oate d B ase

Amps 2.0 P e ak A/ 0.8 A Av e /12 V

VD C 24 12/24

1.5 A P e ak/ 0.6 A Av e /12 V

Features: MC11MA •SAE J845 Class 1 Certified. •Extruded aluminum platform for rugged, long-life dependability. •Standard current switching with Scan-Lock™ flash patterns and pattern override. •Low profile design with amber outer lenses and compression fit gasket for superior moisture resistance. •Clip-Lock™ system allows easy removal of lightbar domes. •Models come as MC16PA pre-configured Amber lightbars (no options available.) Warranty: LED= 5 years.

MC23PA

L31HAF F .P .M .

P e rm a n e n t 2 A v e ra g e / M o u n t 3 0 B u lit In 5 Peak S c a n L o c k F la s h P a tte rn s P lu s 4 S im u la te d R o ta tin g P a tte rn s 1 A v e ra g e / 2 .5 P e a k

M ode l L40AP L40AM L41AP L41AM

Century Series Mini Lightbars

T yp e o f M o u n t E n cap su latio n F lan g e / In te rn al

•Magnetic and magnetic/suction mount models supplied with 10’ straight cord and cigar plug with LED indicator On/Off switch •75 Signal Alert Default 25 Total Selectable Flash Pattens •SAE Class 1 Certified (Amber). •50,000 hour rated life. •Medium profile, smooth polycarbonate outer dome, universal application. •Encapsulated electronics for moisture and vibration resistance. Warranty: LED = 5 Years

M a g n e tic M o u n t 7 5 S ig n a lA le rt O n ly

VDC 12 24 12 24

M ode l M C 11P A M C 11M A M C 16P A M C 16M A M C 23M A M C 23P A

T e chnology 4 C orne r Line ar LE D module s and T IR 6 lE D inboards

M ount P e mane nt M agne tic P e mane nt M agne tic P e mane nt M agne tic

F.P .M .

B ase

VD C

17 Flash P atte rns

Aluminum

12 V

DOT-LED Lighting Systems DOT3 System Components Front System Components Choice of 4 Super-LED models with 360 degree warning visibility for front coverage. Includes 60’ of heavy-duty TPE cable.

Micro 400

Micro Freedom

3 3/4” H x 10 3/4” D x 10” L

3 3/4” H x 9 5/16” D x 12 5/16” L

Choose Rear Lightheads Rear lightheads are offered in 3 sizes (1 Not shown). Super-LED lightheads have specially designed lenses for wide light output. All lightheads are supplied with Deutsch® waterproof connectors.

Rear Housings

Rear mounted lightheads include 30’ heavy-duty, oil resistant TPE jacketed cable with strain relief flex tubing and couplings that provide added safeguard against the elements.

400 Series 4 15/16” H x 3 3/16” W

Stainless Micro 400 3 5/8” H x 8 1/4” D x 8 1/4” L

Remote L31 Beacon

4 1/2” H x 7 3/16” Dia.

700 Series 7 1/4” H x 3 1/16” W

700 Series

400 Series

Height Single: 8 3/8” Double: 16 1/4” Triple: 24” Width: 3 1/2” Depth: 5”

Height Single: 5 7/8” Double: 11 3/8” Triple: 17” Width: 3 1/2” Depth: 4 3/4”

Rear Lighthead Housing Mounting Positions

Wing Plow Series

Features:

•Set of two lightheads provides complete coverage whether plow wing is in the operation position, or in the stowed travel position. •LED modules are fully encapsulated and are vibration, water and salt/chemical resistant. M odel No.

Usage

W PLO W 1A

W h e n p lo w is in u s e

W PLO W 2A

W h e n p lo w is s to w e d fo r tra v e l

L ig h tin g

T IR 3 S u p e r L E D w /b u ilt in fla s h e r

F la s h P a tte rn s

2 3 p lu s s te a d y

C a b le

VDC

H o u s in g

2 0 ' H .D . T R P w /b u ilt in s tra in re lie f c o n n e c to rs

Rugged C ast A lu m in u m

Call For Pricing 81

Safety Director Bar

SAE Class 2 3000 Series

Features

•8 user selectable flash patterns signal traffic to avoid hazards •Hi/Lo intensity switch •Warranty: 2 years Bulb = 90 days

4 Head DOT Remote Incandescent or halogen directional warning power Hideaway Strobe System with a choice of flash •Power supply has compact die-cast aluminum housing and patterns and user-friendly epoxy encapsulated electronics control, the Safety Director is •Weatherproof housing and the ideal product to steer traffc connections allow mounting away from work zones and Warranty: anywhere on vehicle other dangerous situations. Power Supply = 2 years •Hide-away and directional/360° 560-3015

Flashtube = 6 months strobe systems available •Short circuit protection, output power regulation and flash tube fault detection •Designed for efficient heat dissipation for longer life

The world leading back-up alarms, 500 series

K7000 Series

The 7.0” LCD high resolution color monitor included with this kit provides the optimal viewing area for mobile CCTV applications. Excellent picture quality is assured even in low light conditions using ECCO’s infrared camera. The flat, widescreen monitor allows unobtrusive mounting with a large, easily viewable screen area.Kit is expandable up to 2 cameras.

3510 Series

3900 Series

PAR T N O . 5 6 0 -C P 5 1 0 5 6 0 -S A 9 5 1

V o lta g e 15' 35'

Surface Mount

d B (A ) 97 7 7 -9 7

Am ps 0 .2 0 .4

560-3810

•Tough, clear Polycarbonate housing •Epoxy encapsulated electronics for environmental protection •High output quad flash operation •Warranty: 5 Years •Temperature range: -22 F to +122 F

SAE Class I 15" Rotating Minibar

5135 Series

Grommet Mount LED Light Heads

•Compact size & universal mounting maximize location options •Self-grounding: no grounding wire needed for installation •ECCO reliability in a cost-effective back-up alarm •Sealed in epoxy against dust, moisture & vibration

3810 Series

•24 1-watt high intensity LED’s provide exceptional warning. •16 flash patterns including single, double, triple, quad, deci and cycle all. •Synchronizable with additional 3510’s and any Hide-A-LED •In-line waterproof drive module allows for premium functionality and compact size •Warranty: 5 years

•High output LED’s offer low maintenance, long life and low current consumption •Ultrasonically sealed housing •Vibration and shock resistant construction •Warranty: Available Colors 2 years

ECCO's most popular alarm line, isavailable in a wide range of volume ranges & operating voltages to suit a wide variety of applications.

560-3960A •Low profile, high performance

560-3940A

belt-driven minibar •Unique free-form optics rotator modules provide high intensity light output •Optional Vacuum magnet version features 2 factory fitte vacuum magnets and 15' straight cigarette cord with plug •Warranty: Minibar = 2 years Available Colors Belt = ECCOLIFE Bulb = 90 days

速

O perating V oltage 12/24

Am p D raw Low dom e

FP M

Flash P atterns

B ase M aterial

D im ensions

W eight

W arranty

O perating V oltage

V arious

Alum inum

6 1/2" x 5 1/4"

2.75 Lbs.

5 Y ears

12/24

Am p D raw 0.8A @ 12.8 V , 0.4A @ 25.6 V

FP M

Flash P atterns

B ase M aterial

D im ensions

W eight

W arranty

V arious

P olycarbonate

6 1/2" x 6"

1.9 Lbs.

5 Y ears

速速

O p e ra tin g V o lta g e 1 2 /2 4

A m p D ra w 1 .2 A @ 1 2 .8 V

RPM 7 5 /9 0 /1 2 0

B a s e M a te ria l P o lyc a rb o n a te / A lu m in u m

D im e n s io n s

W e ig h t

W a rra n ty

5 3 /4 " x 7 .0 9 "

2 .7 5 L b s .

5 Y e a rs

速

L.E.D. Strobe Light •4 7/8” Rectangular Strobe Light •4 L.E.D. Amber •9-36 V, 392 F.P.M •Aluminum Housing •Quad Flash •DOT & SAE Approved

LED Clear Diecast Aluminum Flood Light 605-1492115 •6 LED •12- 24 VDC •1350 Lumens •1.5 Amps •Waterproof •4.5” Round •Stainless Steel Mount

4” Round Amber Strobe Light, Recessed, L.E.D. 605-SL40AR

6 1/2” Oval Amber Strobe Light, Recessed, L.E.D. 605-SL65AO

12 Volt Utility Light 1492100

12 Volt L.E.D. Utility Light 605-1492110

•Quad flash amber strobe light. •100,000 hour rated life. •24 square-type LED's/lights •12-24 VDC. •198 F.P.M. •3 pin quick plug wire harness

•Ideal for salt spreader applications •35 Watts •12-24 VDC •2.9 Amps •5” sealed rubber housing

•Quad flash amber strobe light. •100,000 hour rated life. •19 square-type LED's/light •3 pin quick plug wire harness •12-24 VDC. •198 F.P.M.

•36” prewired lead •6 High Power LED’s

•12-24 Volts •1.5 Amps •1350 Lumens •Waterproof •Shock resistant

L.E.D. Hidden Strobe Lights

Bolt-On LED Hidden Strobes 605-8891215 Clear 605-8891216 Amber •6 LED, 15 Ft. Cable •Inline flasher •2 bolt on •540 lumen heads

Push-On LED Hidden Strobes 605-8891325 Clear •6 LED, 25 Ft. Cable •Inline flasher •540 lumen heads •Also Available in Amber

Mounting Brackets 605-8891200 •1 Pair Chrome •Also Available in Black •Surface Mount

Rocker Switch Controller 605-6391215 •On-Off •10 Amps •15 Ft. pre wired cable

Mini Lightbars & L.E.D. Mini Lightbars

605-8891040

605-8891050

•12 Volts, 2 Amps 24 Watts, 24 High-Power LED’s •Low Profile Polycarbonate lens •7 selectable flash patterns •2 rubber-covered magnetic mounts •9.5’ cord with aux. plug and built-in flash pattern selector •11" L x 6.5" W x 3.44” H

•Cigarette plug adapter with integral on/off switch and 10’ power cord •Bulb: 24 Amber 1/2 watt Hi-Power LED’s (6 heads) •Current: Max. 3.5 Amps •Voltage: 12 VDC •2 Rubber Coated Magnet Mounts •10.93" L x 5.75" Wx 3.44” H

605-8891050

605-8891060

•10-30 VDC, 3.2 Amps, 38.4 Watts •56 High power amber SMD LED’s •Low profile design, Clear acrylic lens •10 selectable flash patterns •4 Rubber coated magnetic mounts •Meets SAE J845 Class 1 •15" L x 8.25" W x 3” H

605-8891090

•18 High power amber LED’s •12 VDC, 3.2 Amps, 38.4 Amps •11.5’ cord w/built-in on/off switch andflash pattern selector •19 selectable flash patterns •4 Rubber coated magnetic mounts •15" L x 9" W x 3” H •Low profile design

•32 High power amber LED’s •24 selectable flash patterns •56 High power amber SMD LED’s •Low profile design, 3.2 Amps @ 12 VDC •Multiple mounting options available •10’ cord w/built-in on/off switch •15" L x 9" W x 3” H

605-8891100

•Cigarette plug adapter with integral on/off switch and 10’ power cord •16 5/8" L x 11" W x 2 5/8” H •Vacuum magnetic mounts •Programmable flash patterns (25) •Conforms to SAE-W-07 Standards •Bulb: 300 Amber 5 MM LED’s (10 heads) •Clear outer lens •Voltage: 10-30 VDC

function and style for today’s trucks

•NO DRILLING REQUIRED ON MOST TRUCKS Installation kits with clever bolts that don’t require drilling. •CAB PROTECTION - Protects against personal injury caused by shifting cargo. •CUSTOM FIT FOR YOUR TRUCK - Designed for each and every truck to ensure an attractive appearance. •SIMPLE INSTALLATION - Each BackRack is engineered to fasten securely in the truck’s stake pockets.

16” x 7” Rect. Bracket

Toolbox Brackets 430-91010 430-91012 430-91011 430-91010-C

430-91006 2” L Brackets Inc.

430-91002REC Center Mount

Adapts to most light bars.

430-91007 Side Mount

430-81001 Driver’s Side 430-81003 Passenger Side

10.5” Round Bracket

Arrow Stick Bracket

Sport Light Brackets/Pr

Antenna MountingBracket

430-91001 Driver’s Side 430-91002 Center Mount 430-91003 Passenger’s Side

Light Bar Bracket

430-91004

Can also be used with safety rack

Adapts to most arrow sticks

430-91005 One pair of L brackets. Bolts to existing holes in urpight

6.5” Round Bracket

430-91008 Designed to accomodate 2-way communcations antenna.

One of the reasons people like BACKRACK so much is because they are made "accessory friendly". Whether you want to mount toolboxes, cargo, ladders, signal lights or antennas, BACKRACK has the accessory. Call us for info on additional accesories available.

555-9030 Voyager ® NOW HANDLES UP TO 8 BRAKES

For 1, 2, 3 & 4 Axle Trailers

Recessed controls protect gain and level settings from accidental readjustment. Ergonomically designed control lever for easy, accurate gain and level settings.

Brake Controllers

555-90160 Primus®

For 1, 2 & 3 Axle Trailers

Easy-to-set systems allows the driver maximum flexibility when determining how the trailer should respond to a braking event. Removable electrical connector allow unit to be quickly stored when not in use.

555-90885 Prodigy 2

For 1, 2, 3 & 4 Axle Trailers

No level adjustment necessary - it adjusts itself to varying terrain as you drive. "Boost" feature gives users the ability to apply more initial trailer braking power when towing heavier trailers. Limited lifetime warranty.

555-90195 The MOST Advanced Tekonsha Brake Control......... EVER!

For 1, 2, 3 & 4 Axle Trailers

In addition to multiple language, color and contrast options, the LCD display features highly advanced, easyto-read understand roadside diagnostics.

•MIN1600 is designed to fit a single axle with 16.5" wheels. •The set consists of 2 pieces (2 - PM1601 single fenders). •The total weight of the MIN1600 fender kit is less than 11 pounds.

985-1601B

•Either set •The total weight of either consists of 2 the 2260 or 2480 kit is pieces (2 PM2261/PM2481 less than 30 pounds. single fenders). • Designed to fit either a single axle with 22.5" or 24.5" wheels.

•Optional lightbox can be molded into the rear section

MIN2260/2480

985-1901 •The set consists of 4 pieces (4 PM1501 fender sections)

•Optional lightbox can be molded into the rear section as 1 piece to protect wiring.

• MIN1900 is designed to fit a single axle with 19.5" wheels. • Works great for a super single. • The set consists of 2 pieces (2 - PM1901 single fenders). • Total weight of the MIN1900 fender kit is less than 14 pounds.

MIN1500

• Designed to fit a tandem axle tractor or trailer. •The total weight of the MIN1500 fender kit is less than 48 pounds.

3,500 lbs. Force, for 8-30 cu. yd dumps •Frees frozen, sticky and wet material from dump body sides and floor •Saves time & money with faster dumping •Reduces wear & tear on body & hydraulics •Light weight, aluminum housing for ease of installation with less corrosion •Mounting Kit includes: 50' 4AWG wire, solenoid, circuit breaker, push-button switch, steel mounting plate with fasteners

420-DBV3500

50 Lbs.

When wet, sticky, or frozen material clinging to your dump vehicle is the problem, Cougar's line of compact, lightweight truck vibrators is the answer.

Cougar Vibrators are tightly sealed against dirt, dust, and water for long life in extreme conditions. Shielded oversized, permanently lubricated ball bearings assure exceptional service life. High-speed, low-amp electric motors keep size and weight to a minimum for easy, low-cost installation. And Cougar Truck Vibrators bolt to a mounting plate welded to the frame to maximize vibration effectiveness.

Saddle Boxes

WEATHERGUARD Saddle Boxes are the toughest truck boxes in the business. Our saddle box suspends from the side rails of your pickup truck, allowing for plenty of room underneath.

Cross Boxes

Available In: Clear Aluminum Black Aluminum, Steel &

M odel 6 6 0 -1 1 7 -0 -0 2 6 6 0 -1 1 7 -5 -0 1 6 6 0 -1 2 1 -0 -0 1 6 6 0 -1 2 1 -5 -0 1 6 6 0 -1 2 3 -0 -0 1 6 6 0 -1 2 7 -0 -0 1 6 6 0 -1 2 7 -0 -0 2 6 6 0 -1 2 7 -5 -0 2

L e n g th 7 1 1 /2 " 7 1 1 /2 " 7 1 1 /2 " 7 1 1 /2 " 7 1 1 /2 " 7 1 1 /2 " 7 1 1 /2 " 7 1 1 /2 "

W id th 2 7 1 /2 " 2 7 1 /2 " 2 0 1 /4 " 2 0 1 /4 " 2 0 1 /4 " 2 0 1 /4 " 2 0 1 /4 " 2 0 1 /4 "

H e ig h t 1 8 1 /2 " 1 8 1 /2 " 15" 15" 24" 1 8 1 /2 " 1 8 1 /2 " 1 8 1 /2 "

C u b ic F t. 1 5 .3 1 5 .3 6 .4 4 .1 4 .1 1 1 .3 1 1 .3 1 1 .3

Available In: Clear Aluminum, Black Aluminum, Steel & White Steel

With two independent covers, WEATHERGUARD Cross Boxes offer easy access from either side of the truck and can be used separately or in combination with Lo-Side Boxes and Super-Lo Boxes. Cross boxes come in different sizes and styles to match both your truck and your trade Offer easy access from either side of your trucks

Features

Heavy Duty TRANSFER TANKS

•Easy Transport of Non-Flammable Liquid •Overfill Restriction (Automatic Shutoff at the Pump!) •Constructed of Extra Heavy Weight .125 Treadplate Aluminum or 12 Gauge Steel •Includes a Mounting Kit, Lockable Cap and Coupler •Flush Mounted Dual 2” Reinforced Bungs •Reinforced Pump Mounting Location •Fully Welded Mounting Brackets •Baffles Add Strength While Preventing Contents From Shifting

Available In Both Clear Aluminum And White Steel 664-29224163 Steel 88 Gallon L-Shaped Transfer Tank 54.25” L x 31” W x 24” H

664-37024150 Aluminum 88 Gallon L-ShapeTransfer Tank 54.25” L x 31” W x 24” H 664-37024153 Aluminum 36 Gallon Vertical Transfer Tank 45.25” L x 11” W x 17” H

664-29224166 Steel 36 Gallon Vertical Transfer Tank 45.25” L x 11” W x 17” H 664-29224167 Steel 100 Gallon L-Shaped Transfer Tank 60” L x 31” W x 24” H 664-37024149 Aluminum 100 Gallon L-Shaped Transfer Tank 60” L x 31” W x 24” H

664-37024158 Aluminum 75 Gallon L-Shaped Transfer Tank 48.25” L x 31” W x 24” H 664-37024159 Aluminum 75 Gallon Combo Transfer Tank 48.25” L x 31” W x 24” H

Hwy 60 East 52248 Ember Rd. Lake Crystal, MN 56055

Check Our Website For Ever Changing Used/OneOf-A-Kind Inventory At www.crysteeltruck.com

999-01022 Bobcat Spreader $775.00

999-01063 7 1/2’ Curtis Straight Blade w/88-98 Chevy Mounts $1,795.00

999-01023 7 1/2’ Western Pro Unimount New Lights, Complete $2,800.00

999-03912 Snowblower, 8 Ft. Model, 72003 Root Diesel Power Plant Model 453 $9,800.00

999-03881 7’6” Western Uni-Mount $1,900.00

999-00998 1 Year Old, 8’ Hiniker, Straight Blade Poly Plow, Several Mounts Available $4295.00

999-01000 Used Meyer V Plow, Fits 99-04 Super Duty w/mount $2,995.00

999-01070 7 1/2 Western Pro, Choice of mounts, Joystick Control, New Paint Job $2,995.00

999-MS1031SS Monroe Cross Conveyor, Stainless Steel w/18” wide belt, Used Very Little $5,750.00

999-00758 8’ Monroe Stainless Steel Spreader w/deluxe Control & 26” Chute $3,650.00

999-03911 Snowblower, 5 Ft. Erskine 2 Stage, Model 2218 Ser 5793 Skidloader Municipal owned Ready for snow $3,800.00

999-00971 Used Case Model 80 Snow Blower, 86” wide, Tractor 3 point hitch mount $2,700.00