TABLE OF CONTENTS CTA 1/2011 REVIEW/Embedded Systems
DEVELOPMENT/Atomic Energy
6
64 Control system for the experimental multipurpose test chamber
Halfway to the future, or PICMG 2.30 CompactPCI PlusIO specification By Valeriy Yakovlev
By Andrey Shustov and Marianna Shustova
The article provides a brief discussion of the progress trends in the architecture of the system bus of the trunk modular systems based on the CompactPCI specifications. Taking into account the current state of development of high speed serial interfaces and the demand for intensive exchange of large data streams between modules in the system which should be provided in industrial applications, it becomes evident that modern technologies and time proven standards should be integrated. The adopted PICMG 2.30 CompactPCI PlusIO standard allows for a smooth transition from classical PICMG parallel bus systems to hybrid systems, where the possibility exists of involving the available arsenal of developments based on high speed serial interfaces.
The article describes the control system for an experimental multipurpose test chamber for developing the basic MOX fuel production processes. The challenge faced by the developers was to find a modern and reliable solution ensuring personnel safety and high accuracy of mechanism positioning.
14 Industrial computers for embedded systems
DEVELOPMENT/Monitoring and Measuring Systems
72 Automated control system for a standard force measuring machine By Victor Rozhentsev, Yurii Prokopenko, Vladimir Marakhovsky and Aleksandr Shamanin
By Aleksei Sorokin The article describes industrial computer systems and industrial computers based on single board computers in standard form factors. There is an attempt to classify industrial computers by type of system architecture as well as applications. The article details embedded panel and rugged computers for industrial and transportation use, operation in harsh environments and which support the possibility of expansion of functionality.
The article describes an industrial computer based control system for the Type OSM2 200 10 Class 2 force measuring machine used in the state system for ensuring uniform measurements when transmitting the size of the unit of force from the reference devices to the standard and operation measuring devices. The implemented control system enhanced the objectivity in the assessment of results and labor productivity when carrying out the metrological certification of the Class 3 dynamometers used for checking the working force measuring devices, including test machines and presses.
22 PC/104 – standard for harsh operating conditions By Aleksei Pyatnitskykh The article describes basic PC/104 form factors and presents the key benefits of the standard for operation in harsh environments and critical applications. Also discussed are the most interesting brand new PC/104 products from leading manufacturers.
REVIEW/Industrial Networks
DEVELOPMENT/Metallurgy
84 Automated control of the dividing shear section in the 2800 rolling mill at JSC Uralskaya Stal By Oleg Zementov
30 EtherWAN for Ethernet
The article provides a description of the dividing shear section in the 2800 rolling mill, covers automated control tasks, shows the structure of the hardware software control complex and discusses hardware implementation based on Siemens equipment. The implementation of the said control system allowed for provision of the required capacity of the section within the rolling mill revamping project.
By Dmitriy Bakaev The article offers an overview of the EtherWAN communication hardware designed for the Ethernet industrial networks. The article looks at the history and innovations of the company. It analyzes the specific features of the products and provides a table containing information on the most popular series. Also included are schemes with examples illustrating a potential application of the company's products, including those for designing the redundant network architecture.
REVIEW/Hardware
ENGINEER'S NOTEBOOK
88 Mechanical structures of the 19" series: Schroff plug in units By Vladimir Belomytsev
42 Not drowned in water, nor burnt in fire. Dear field friends
The article discusses the design features of plug in units offered by Schroff – one of the leading European manufacturers of the enclosures for the electronics and electrical industry.
By Sergey Dronov The article describes specific features of field application of rugged mobile computers and presents their distinctive design features compared to their commercial analogs. Also reviewed are the most interesting – from a technical point of view – rugged mobile computers from Getac.
92 Fieldbus controllers and Fieldbus Ethernet converters: from capturing attention to practical use By Ivan Lopukhov
SYSTEM INTEGRATION/Power Engineering
The article is intended to serve as a practical guide to build Fieldbus and Real Time Ethernet networks based on Hilscher equipment. As exemplified by the PROFIBUS and Modbus protocols, the equipment adjustment process employing Sycon.net, a universal system configuration tool, is illustrated.
48 Automation and the alternative energetics: a promising alliance By Dmitriy Shvetsov The article shows world experience in using renewable energy sources. Also included is a comparative analysis between traditional and alternative methods of energy generation and a review of modern analytical systems and portals in energetics as well as methods of integration with SCADA and GIS.
SYSTEM INTEGRATION/ Oil & Gas Industry
EXHIBITIONS, CONFERENCES, SEMINARS
98 Basic trends in the RF automation market in 2010 based on statistics of PTA trade fairs and conferences By Oksana Afanasieva
102 PROSOFT at ISR 2010
54 Design of process control system employing the partition function concept
By Denis Rubio
By Ildar Sitdikov, Rinas Farkhetdinov and Fanis Yakupov
SHOWROOM
The article discusses specific design features of a process control system for field oil treatment units based on the function partition principle. The implementation of this principle allows for reducing time of design, installation and start up of facilities. The article provides a list of requirements for designing automation sections and describes the software hardware for typical sections for various applications. Also shown are operator interface capabilities. The article demonstrates the use of products from Rittal, Siemens, VIPA as basic equipment.
103
SYSTEM INTEGRATION/Distributed Control Systems
SYSTEM INTEGRATION PROJECTS IN BRIEF
109 NEWS
12, 39, 70, 96, 100
60 Topology with foresight: data transmission via Ethernet in the process industry By Andreas Grimsehl
112
Until now, the opportunities to use PCs or remote solutions in the process industry were extremely limited for technical reasons. One of the interesting alternatives to the solutions used to date is to transfer data via Ethernet. Unlike classic visualization concepts, the maximum transfer distances are greater and the topology is simpler and more flexible because the visualization platform becomes just another normal network component.
www.cta.ru
DVD ROM IN THIS ISSUE
Pepperl+Fuchs СТА 1/2011