ASPEN AUTOTECH general catalogue by CTC Automotive Equipment Division

WOLF

ELECTRO-HYDRAULIC SCISSORS LIFTS

The best solution for a functional workshop • space saving when lift is all raised • completely free floor space when lift is fully lowered

wolf wolf wolf wolf

25 30 30 35

I / 2500 kg I / 3000 kg MI / 3000 kg I / 3500 kg

Extensible platforms to reach pick up points of the more demanding vehicles

PANTHER All PANTHER models are equipped with: • MECHANICAL SAFETY • LEVELLING DEVICE • SELF-LUBRICATING DEVICE

wolf 25 IF / 2500 kg wolf 30 IF / 3000 kg wolf 35 IF / 3500 kg Fixed length of platforms for easy use

LOW PROFILE SCISSORS LIFTS

BEST SELLING MODEL PANTHER 30

PANTHER

LOW PROFILE SCISSORS LIFTS

EXTRA LOW VERSION CAPACITY 3000 KG MINIMUM HEIGHT 95 mm

PANTHER 30 T

HIGH CAPACITY MODEL 4000 KG LONGER LIFTING PLATES MINIMUM HEIGHT 135 mm

PANTHER 40

ALL PANTHER MODELS ARE AVAILABLE WITH RECESSED VERSION

SHARK

ELECTRO-HYDRAULIC SCISSORS LIFTS

The best solution for a functional workshop: • space saving when lift is raised • obstacle free floor space when lift is fully lowered. No cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area).

LI FTS WI T H FLA T PLA T FOR M S MODEL

CAPACITY MOTOR PLATFORM LENGTH kg kW mm

SHARK 35 SHARK 35 I SHARK 35 T SHARK 35 IT

3500

SHARK 40 SHARK 40 I SHARK 40 T SHARK 40 IT

4200

SHARK 50 SHARK 50 I SHARK 50 T SHARK 50 IT

5000

SHARK 60 SHARK 60 I SHARK 60 T SHARK 60 IT

2,6

4600

3500

4600

flat runways, surface installation flat runways, recessed installation runways with built in wheel free, surface installation runways with built in wheel free, recessed installation

SHARK 40 A SHARK 40 IA SHARK 40 AT SHARK 40 IAT

4200

5100

flat runways, surface installation flat runways, recessed installation runways with built in wheel free, surface installation runways with built in wheel free, recessed installation

SHARK 50 A SHARK 50 IA SHARK 50 AT SHARK 50 IAT

5000

5100

flat runways, surface installation flat runways, recessed installation runways with built in wheel free, surface installation runways with built in wheel free, recessed installation

SHARK 60 A SHARK 60 IA SHARK 60 AT SHARK 60 IAT

6000

2,6 3,5 2,6 6000 3,5

Hydraulic levelling system by means of a patented synchronization device assures constantly level lifting platforms regardless of weight distribution.

Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position.

VERSION

CAPACITY MOTOR PLATFORM LENGTH kg kW mm

SHARK 35 A SHARK 35 IA SHARK 35 AT SHARK 35 IAT

3,5

4600

wheel aligment runways, surface installation wheel aligment runways, recessed installation wheel aligment runways with built in wheel free, surface installation wheel aligment runways with built in wheel free, recessed installation

4600

5100

2,6 3,5 2,6 3,5 2,6 3,5 2,6 3,5

Base plates with levelling system for an easy installation

All pivot points made with self lubricating bushings for long life.

All can be supplied for recessed installation.

WH EEL A LI G N M ENT L I F T S MODELLO

flat runways, surface installation flat runways, recessed installation runways with built in wheel free, surface installation runways with built in wheel free, recessed installation

2,6 3,5

VERSION

Lifts with large size platforms and sturdy structure assuring maximum rigidity and working stability.

SHARK

ELECTRO-HYDRAULIC SCISSORS LIFTS

OPTIONS S 502A2 H (2 x kit)

Jacking beams

S 601 A4

Longer run-up ramps 1900 mm long.

Remote control hand set for all models.

Lighting kit S 650 A2 (4 X KIT)

S 611 A4

Power unit cover S 110 A7

(2 x kit) Turntables for wheel alignment

Spacers for turn table housing

SHARK

low profile SCISSORS LIFTS A wide range of low profile lifts. The best alternative to recessed installation.

LOW PROFILE 155 mm Minimal platforms height 155 mm: easy access including cars with low spoilers. Limited length. MODEL SHARK 35 LOW SHARK 35 LOWT SHARK 35 LOWA SHARK 35 LOWAT SHARK 35/46 LOWA SHARK 35/46 LOWAT

All pivot points made with self lubricating bushings for long life.

Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position.

Hydraulic levelling system by means of a patented synchronization device assuring constantly levelling of lifting platforms regardless of weight distribution.

CAPACITY MOTOR PLATFORM VERSION LENGTH kg kW mm flat runways 4200 flat runways with built in wheel free 4200 wheel alignment runways 4200 3500 2,6 4200 wheel alignment runways with built in wheel free 4600 wheel alignment runways wheel alignment runways with built in wheel free 4600

No cross rails or torsion bars between lifting platforms (for maximum accessibility to the working area).

Every time the platforms reach the floor, the lift is perfectly levelled thanks to a patented valve.

SHARK

LIFTS FOR TESTING LINE

WHEEL ALIGNMENT LIFTS

MODEL

CAPACITY MOTOR kg

SHARK 40 AP4 SHARK 40 I AP4 SHARK 40 AP4 T SHARK 40 I AP4 T

Plate with indented surface to prevent plate- wheel sliding.

4200

2,6

PLATFORM LENGTH mm

DESCRIPTION

4600

3,5

SHARK 40 LAP8 SHARK 40 I LAP8 SHARK 40 LAP8 T SHARK 40 I LAP8 T

4200

SHARK 50 LAP8 SHARK 50 I LAP8 SHARK 50 LAP8 T SHARK 50 I LAP8 T

5000

SHARK 60 LAP8 SHARK 60 I LAP8 SHARK 60 LAP8 T SHARK 60 I LAP8 T

6000

wheel alignment platforms with 8 movements play detector surface installation wheel alignment platforms with 8 movements play detector recessed installation wheel alignment platforms with 8 movements play detector + lift table surface installation wheel alignment platforms with 8 movements play detector + lift table recessed installation wheel alignment platforms with 8 movements play detector surface installation wheel alignment platforms with 8 movements play detector recessed installation wheel alignment platforms with 8 movements play detector + lift table surface installation wheel alignment platforms with 8 movements play detector + lift table recessed installation

2,6 3,5 2,6

5100

3,5 2,6

VERSION

5100

3,5

LIFTS WITH FLAT PLATFORMS MODEL

CAPACITY MOTOR kg

SHARK 35 P4 SHARK 35 I P4 SHARK 35 P4 T SHARK 35 IP4 T SHARK 40 P4 SHARK 40 I P4 SHARK 40 P4 T SHARK 40 I P4 T

A wide range of low profile lifts. The best alternative to recessed installation.

3500

kW 2,6

PLATFORM LENGTH mm 4600

3,5

4200

2,6

4600

3,5

SHARK 40 LP8 SHARK 40 I LP8 SHARK 40 LP8 T SHARK 40 I LP8 T

4200

SHARK 50 P8 SHARK 50 I P8 SHARK 50 P8 T SHARK 50 I P8 T

5000

SHARK 60 P8 SHARK 60 I P8 SHARK 60 P8 T SHARK 60 I P8 T

6000

2,6 3,5 2,6

5100

3,5 2,6

5100

3,5

DESCRIPTION

VERSION

flat platforms with 4 movements play detector flat platforms with 4 movements play detector flat platforms with 4 movements play detector + lift table flat platforms with 4 movements play detector + lift table flat platforms with 4 movements play detector flat platforms with 4 movements play detector flat platforms with 4 movements play detector + lift table flat platforms with 4 movements play detector + lift table

surface installation recessed installation surface installation recessed installation surface installation recessed installation surface installation recessed installation

flat platforms with 8 movements play detector flat platforms with 8 movements play detector flat platforms with 8 movements play detector + lift table flat platforms with 8 movements play detector + lift table flat platforms with 8 movements play detector flat platforms with 8 movements play detector flat platforms with 8 movements play detector + lift table flat platforms with 8 movements play detector + lift table

surface installation recessed installation surface installation recessed installation

4 movements play detector 4 movements play detector

8+4 movements play detector 8+4 movements play detector

W H E E L A L I GNMENT L I F T S MODEL

CAPACITY MOTOR kg

SHARK 40 AP4 SHARK 40 I AP4 SHARK 40 AP4 T SHARK 40 I AP4 T

4200

2,6

PLATFORM LENGTH mm 4600

3,5

SHARK 40 LAP8 SHARK 40 I LAP8 SHARK 40 LAP8 T SHARK 40 I LAP8 T

4200

SHARK 50 LAP8 SHARK 50 I LAP8 SHARK 50 LAP8 T SHARK 50 I LAP8 T

5000

SHARK 60 LAP8 SHARK 60 I LAP8 SHARK 60 LAP8 T SHARK 60 I LAP8 T

6000

2,6 3,5 2,6

5100

3,5 2,6 3,5

5100

DESCRIPTION

VERSION

Accessories for testing line on motorcycle veichles with 2,3,4 wheels a

wheel alignment platforms with 4 movements play detector surface installation wheel alignment platforms with 4 movements play detector recessed installation wheel alignment platforms with 4 movements play detector + lift table surface installation wheel alignment platforms with 4 movements play detector + lift table recessed installation wheel alignment platforms with 8 movements play detector surface installation wheel alignment platforms with 8 movements play detector recessed installation wheel alignment platforms with 8 movements play detector + lift table surface installation wheel alignment platforms with 8 movements play detector + lift table recessed installation wheel alignment platforms with 8 movements play detector surface installation wheel alignment platforms with 8 movements play detector recessed installation wheel alignment platforms with 8 movements play detector + lift table surface installation wheel alignment platforms with 8 movements play detector + lift table recessed installation wheel alignment platforms with 8 movements play detector surface installation wheel alignment platforms with 8 movements play detector recessed installation wheel alignment platforms with 8 movements play detector + lift table surface installation wheel alignment platforms with 8 movements play detector + lift table recessed installation

LIFTS W I T H F L A T P L A T F O R MS

S 1394A1 Wice b

S 640A2 Additional platform

b b

surface installation recessed installation surface installation recessed installation

FALCON

electro-mechanical two posts lifts Lift with base for easier installation on low quality floors. Width between posts 2500 mm. Min. pad height of 95 mm only. Two stage short arms. Transmission by pre-tensioned high resistance chain with safety device.

FALCON 27 PC2 / 2700 kg Automatic and permanent nut lubrication system to guarantee efficient lubrication during lifting and Descent.

FALCON 32 PC3 / 3200 kg

FALCON

Automatic arm locking during lifting and automatic unlocking when the arm reaches the floor - self-locking conical design.

Main nut made of bronze (no plastic) with high resistance to wear, for greater safety.

electro-mechanical two posts baseless lifts • Automatic and permanent nut lubrication system to guarantee efficient lubrication during lifting and descent. • Main nut made of bronze (no plastic) with high resistance to wear, for greater safety. • Automatic arm locking during lifting and automatic unlocking when the ok arm reaches the floor - self-locking conical design.

K models Arms suitable for quick drop-in extensions.

ELECTROMECHANICAL synchronization FALCON 5.337 W / 3200 kg Three - stage short arms for asymmetric lifting of large vehicles - min. pad height 95 mm. The electromechanical synchronization keeps the carriages within an alignment of 20 mm. FALCON 5.337 WK / 3200 kg Arms suitable for quick drop-in extensions. FALCON 5.337 WR / 3200 kg Extra low profile arms, parallel to the floor - double thread pads with a min. height of 80 mm only - recommended for sport cars and very low profile vehicles. FALCON 5.349 WE / 4200 kg Three-stage short arms and two-stage long arms provide asymmetric lifting of vans and off-road vehicles-width between posts 2650 mm.

ELEctronic synchronization FALCON 5.245 WEK / 4200 kg As 349 WE but with electronic synchronization.Cables can be ceiling installed or recessed in the floor. Arms suitable for quick drop-in extensions. FALCON 50 LIKT / 5000 KG High capacity to meet any lifting needs up to 5000 kg. Model equipped with four long three-stage arms: ideal to lift long wheel-base vans.The arms’ extensions slide on spring-mounted rollers, allowing easy use and a steady load. FALCON 50 LIKA / 5000 KG This model offers a minimum pad height of 120 mm and is equipped with two long 4-stage arms for the asymmetric lifting of particularly large and heavy vehicles, such as the armoured luxury models produced by various manufactures.

DOLPHIN

electro-hydraulic two posts lifts • Perfect synchronization between carriages regardless of load distribution. • Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture. ok • Self-controlled lowering speed. Version on demand featuring: • Single lifting/lowering control • Pneumatic release of locking devices • Control unit on the upper part of the column. adjustable height

Special versions DOLPHIN 42K / DOLPHIN 42 LIK Different extensions in height

VAR3725

1870

3725 (3625)

VAR3975

2005

3975 (3875)

STANDARD

2005

4175 (4075)

VAR5000

2005

5000 (4900)

• Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position. • Automatic arm locking during lifting and automatic unlocking when the arm reaches the floor. Self-locking conical design. • Synchronization cables grant the levelling of the two carriages. • Each column features a maintenance-free lifting cylinder. • Adjustable height. • Very low pad, adjustable height.

DOLPHIN 32 / 3200 kg Three - stage short arms for asymmetric lifting of large vehicles. Min. pad height 95 mm. DOLPHIN 32K / 3200 kg Arms suitable for quick drop-in extensions and other lifting accessories. DOLPHIN 32R / 3200 kg Extra low profile arms, parallel to the floor. Double thread pads with a min. height of 80 mm only. DOLPHIN 42K / 4200 kg Three-stage short arms and two-stage long arms provide asymmetric lifting of vans and off-road vehicles. DOLPHIN 42LIK / 4200 kg Model equipped with four long three-stage arms: ideal to lift long wheel base vans and easy loading of cars. 90

S 305 A9 For Mercedes Sprinter, VW LT e Ford Transit Spacers (2+2 pcs)

ø 45

S 224 A3 (H=80mm) S 224 A4 (H=140mm) For Fiat Ducato, Peugeot Boxer, Citroën Jumper Spacers (4 pcs)

220

ø 45 220

ø 45

HUSKY

MID-RISE LIFTS ok

The ideal lift for servicing tyres, brakes, suspension and bodywork.

HUSKY 25 MB / 2500 kg

S1450NA1

Portable lift kit

This lift of the latest generation has the following features: electrohydraulic operation, high loading capacity and elevated lifting height, rapid cycle times. Being practical and easy to use, this lift guarantees the maximum safety to the user. • A mechanical levelling system assures constant levelling of the lifting platforms regardless of weight distribution. • All components are manufactured in compliance with the European Safety Standards. • Low voltage controls (24 V). • All pivot points fitted with self lubricating bushings for long life.

HUSKY 20 P / 2000 KG Air-hydraulic lift

HUSKY 25 A / 2500 KG

HUSKY 20 H / 2000 KG

The traditional lift for tyre service workshops, easy to install both indoor or outdoor. Mobile run-up ramps to allow on the car balancing.Automatic locking latches for safe operation.Maximum pressure valve to protect against overloads.

CRICKET

Electro-hydraulic lift with carriable power unit • Heavy duty spring-loaded wheels retract automatically when lift is loaded. • Removable tow-bar to limit overall dimensions once the lift is positioned beneath the vehicle. The special features of this portable lift such as design of the support frame with arm pick up design, low profile drive over, working height of 1 meter make this lift the ideal instrument for bodyshops.

BIKE LIFTS

CRICKET 600 P CRICKET 600 E / kg 600 Scissors lift with air-hydraulic pump (CRICKET 400 P) or with electro-hydraulic control box (CRICKET 600 E). Great lifting height of 1000 mm.

S 1394 A2

S 1394 A1

CRICKET 400 CRICKET 400 P / kg 400 Pantograph lift with foot-operated hydraulic pump (CRICKET 400) or with air-hydraulic pump (CRICKET 400 P). Lifting height of 800mm.

S 1394 A3

CRICKET 400 T CRICKET 400 TP / kg 400 Wide platform (1000 mm) to lift garden machinery. CRICKET 600 TP CRICKET 600 TE / kg 600 Very wide platform (1450 mm) to lift 3-wheel vehicles and micro-cars. 9

HIPPO

ELECTRO-HYDRAULIC 4 POSTS LIFTS Main technical features • The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected. • High-resistant, galvanised and pre-stretched metal cables. • Large-diameter pulleys with self-lubricating ok and maintenance-free bushes. • Adjustable platform to accomodate different vehicle tracks and optimised access to vehicle underside. • Automatic mechanical backup safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables

FLAT PLATFORMS MODEL CAPACITY DISTANCE PLATFORM PLATFORM BETWEEN WIDTH LENGTH COLUMNS kg mm mm mm 3500 2450 4300 400 HIPPO 35 4000 2800 4460 500 HIPPO 40 4000 3000 5100 530 HIPPO 40 M HIPPO 40 L 4000 2800 630 5000 5000 3000 530 5100 HIPPO 50 HIPPO 65 6500 3300 500 5150 HIPPO 80 8000 3300 650 6000 PLATFORMS WITH TURNING PLATES LOCATIONS 560 4000 2800 4460 HIPPO 40 R FLAT PLATFORMS WITH FREE 4460 LIFT 500 4000 2800BUILT IN WHEEL HIPPO 40 530 4000 2800 4460 HIPPO 40 T HIPPO 40 LT 4000 3000 530 5100 PLATFORMS FOR TOTAL WHEEL ALIGNMENT 4000 2800 530 4460 HIPPO 40 A 4000 3000 530 5100 HIPPO 40 LA HIPPO 50 A 5000 3000 530 5100 PLATFORMS FOR TOTAL WHEEL ALIGNMENT WITH BUILT IN WHEEL FREE LIFT 4460 HIPPO 40 AT 4000 2800 550 HIPPO 40 LAT 5100 4000 3000 550 HIPPO 40 T PLATFORMS WITH BUILT IN PLAY DETECTOR FLAT 4460 4000 2800 560 HIPPO 41.4 5000 4000 2800 630 HIPPO 40.4

HIPPO 41.4 HIPPO 40.4

Equipped with front play detector.

T version with lift-table

OPTIONS 4X KIT Post covers

Lighting kit

Jacking beams

Long run up ramps

S 505 A2 (2 x kit) Cross members to provide safe wheel free lifting of vehicles with narrow lifting points.

HIPPO TRUCK

ELECTRO-MECHANICAL 4 POSTS LIFTS Maximum access to the vehicle thanks to the special concept of extended ok platforms, unique feature range of commercial lifts. Space is freely available to fit any part, including the engine.

• Total safety • The motors are interconnected mechanically by line shafting and bevel gear boxes in oil bath to ensure the perfect level of the platforms and balanced load on motors regardless of vehicle position. • Automatic lubrication of main and safety nuts and spindles. • Main and safety nut assembly. HIPPO 240 / 24T - HIPPO 200 / 20T - HIPPO 140 / 14T - HIPPO 120 / 12T The platform length and the capacity of these lifts make them ideal for busses and trucks.

DUO TWIN LIFTS Two lifts can be twinned as follows: a) synchronised, therefore with the two lift platforms working at the same height; b) in single mode, therefore with the two lifts working independently with platforms at different height.

TECHNICAL DATA Capacity Three-phase motors Weight Platforms Iength

HIPPO 100F / 10T - 3740 mm Lifts for fork lift trucks. Equipped also with a third central platform, to enable lifting of three-wheeled fork lift trucks.

HIPPO 240 HIPPO 200 HIPPO 140 HIPPO 120 HIPPO 100 F kg kW kg mm

24000 4X4 4200 8000

20000 4X4 4170 8000

14000 4X2 3110 8000

12000 4X2 3070 8000

10000 4X2 2310 3740

302

202

398

155

145

KP118N - KP118NP / 13,5T Twin-piston hydraulic/airhydraulic wheel-free jack Operated by means of handpump or air-hydraulic pump (vers. NP). Pneumatic feed pressure 6 ÷10 bar. Translation on ball-bearing.

Min. 140 - Max. 935 920 1210

RHINO

COMMERCIAL VEHICLE SCISSORS LIFTS The best solution for a rational workshop • space saving when lift is raised • obstacle free floor space when lift is fully lowered. • Hydraulic synchronization ok of the platforms, independently from the load distribution, by means of: 1) self-regulating device 2) patented start-up valve • No cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area). • All pivot points made with self lubricating bushings for long life. • Platform surface in ribbed anti-slip steel plate. • Audible alarm during the final lowering phase

FLAT PLATFORMS

MODEL

CAPACITY

RHINO 90 RHINO 90 I RHINO 130 RHINO 130 I RHINO 180 RHINO 180 I RHINO 225 RHINO 225 I RHINO 225 L RHINO 225 LI RHINO 330 RHINO 330 I RHINO 450 HD RHINO 450 HDI RHINO 450 RHINO 450 I

kg 9000 9000 13000 13000 18000 18000 22500 22500 22500 22500 33000 33000 45000 45000 45000 45000

PLATFORM LENGTH mm 6000 6000 7000 7000 8000 8000 8000 8000 10000 10000 9000 9000 9000 9000 13000 13000

VERSION surface installation recessed installation surface installation recessed installation surface installation recessed installation surface installation recessed installation surface installation recessed installation surface installation recessed installation surface installation recessed installation surface installation recessed installation

PLATFORMS WITH HOUSING FOR TURN TABLES AND/OR PLAY DETECTOR

RHINO 180 P RHINO 180 IP RHINO 225 P RHINO 225 IP RHINO 330 P RHINO 330 IP

18000 18000 22500 22500 33000 33000

9000 9000 9000 9000 9000 9000

surface installation recessed installation surface installation recessed installation surface installation recessed installation

All lift can be supplied for recessed installation.

RHINO

COMMERCIAL VEHICLE SCISSORS LIFTS

â&#x20AC;˘ Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position. â&#x20AC;˘ Start-up pistons to minimize stress in the early stage of lifting.

RHINO 180 P - 225 P - 330 P Lifts with recess in the front of the platforms to house: - hydraulic play detector (S718PA2) / turning plates for wheel alignment (S718PA3)

DUO-Twin lifts

Models RHINO 90-130-180-225-330 can be twinned as follows: a) synchronized, therefore with the two lift platforms working at the same height; b) in single mode, therefore with the two lifts working independently with platforms at different height.

oPTIONS S720A3 Extra-long run-up.

KP 702 N - 13500 kg

J50 HT / J50 PHT - 5000 kg

EAGLE

ELECTRO-MECHANICAL MOBILE COLUMN LIFTS

EAGLE 70 85 100

EAGLE 70/85/100

2x4

Operating features

Columns in boxed sheet steel with rollers sliding profiles in high resistance steel. Steel rollers for carriage movement fitted on selflubricating bearings requiring no maintenance. Direct drive to the spindle by means of a self-braking motorgear unit.

• Electronic system ensuring synchronization of all columns ok • Master column: with all selection and controls. • Slave column: with lifting and lowering controls and emergency stop button. • Selection of several operating modes: - simultaneous operation of all columns. - simultaneous operation of one or more pairs of columns. - single operation of each column. • Electronic device selects automatically the correct main supply phase sequence. Modular electrical systems (e.g. passing 4 to 6 to 8 columns, or creating two sets of 4 columns by splitting a set of 8).

1x8 4 columns

capacity per column

6 columns

8 columns

MODEL

EAGLE 30 40 55 70 85 100

kg 3000 4000 5500 7000 8500 10000

EAGLE 30.6 40.6 55.6 70.6 85.6 100.6

EAGLE 30.4 40.4 55.4 70.4 85.4 100.4

EAGLE 30.8 40.8 55.8 70.8 85.8 100.8

1x8

2x4

Possibility of setting a different height between pairs of columns while retaining the level synchronization. EAGLE 30 40 55

1x8

EAGLE 30/40/55 2x4 Screws are automatically lubricated by felt pads located in the oil reservoir over the lifting nuts, assuring permanent lubrication during movement. A series of runners (10 per carriage), manufactured in Ertalon with low friction coefficient and excellent resistance to wear, guarantee balanced lifting of the vehicle in any position. EAGLE 55.2 NF For fork lifts

EAGLE 30.4 N / EAGLE 40.4 N / EAGLE 55.4 N

2x4

EAGLE 30/40/55/70/85 Self-supporting transportation steel wheels.

• Simultaneous operation of 4 columns. • Not extendible to 6 or 8 columns • Master column with controls. • Slave column with emergency control only.

EAGLE 100 Transportation wheels in high resistance pIastic. Ground pads SERIE adjustable from the rear side.

EAGLE 30 40 55 70 85 colonne 4100

Portata per colonna

EAGLE EAGLE 30/40/55 kg 30 Handle (1 per set) 3000 40 4000 55 5500

Portata per colonna

EAGLE EAGLE 70

Mechanical 30.4 towing jack

40.4 55.4

4 co

SERIE kg 3000 4000 5500 7000 8500 10000

EAGLE 30.4 40.4 55.4 70.4 85.4 100.4 6 colo

EAGLE EAGLE 85/100 hydraulic towing jack 30.6

40.6 55.6

CONDOR

ELECTRO-HYDRAULIC MOBILE COLUMN LIFTS • Electro-hydraulic operating lifts • Equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture ok • Self-controlled lowering speed • Mechanical safety latch with automatic engagement and hydraulic release ensuring maximum safety when lift is in parking position • Rollers for carriage movement fitted on selflubricating bearings requiring no maintenance • Warning light when the lift is in parking position • Mechanical and electrical safety devices comply with European Safety Regulations. • Thermal protection against overload of motors. • Emergency stop button with self retainer on all columns.

Main control panel on main column featuring all controls.

Secondary control panel, featuring lifting and lowering controls and emergency stop button. AXLE HEIGHT SELECTION

• Possibility of setting a different height between pairs of columns while maintaining the subsequent control level synchronization.

Hydraulic towing jack

Large and solid base for maximum stability under load with self-supporting transportation steel wheels.

CONFIGURATIONS Capacity per column

4 columns

6 columns

8 columns

8500 kg

CONDOR 85 H.4

CONDOR 85 H.6

CONDOR 85 H.8

7200 kg

CONDOR 70 H.4

CONDOR 70 H.6

CONDOR 70 H.8

MODULAR

1x8 ➔

2x4

Modular electrical system allow changing the configuration of the column set (i.e. switching from 4 to 6 or 8 columns or creating two sets of 4 columns by splitting a set of 8 columns). OPTIONS S270A3

S270A4 S270A8

Adapters for wheel having diameter less than 900 mm S 270 A3 - Ø 900 ÷ 800 mm / S 270 A4 - Ø 800 ÷ 700 mm / 270 A8 - Ø 700 ÷ 500 mm

S290A1

Adjustable front pad kits

VAR 290/F

Version on demand featuring adjustable forks for wheels from 500 to 1200 mm in diameter.

CRAB

CAR AND BIKE TYRE CHANGERS ok TYRE CHANGERS with patented lever-free tool • Self-centring chuck • Two-way rotation • High torque • High clamping force(two pistons) Models with tubeless tyre inflation system.The device is activated by a single pedal command with two positions.

CRAB 8641 V.24 1050 mm (41”)

CRAB 8641 V.24 + PLUS 83

381 mm (15”)

1050 mm (41”)

CRAB 8641

CRAB 8641 V.24 2 SPEED CRAB 8641 IV.24 2 SPEED

OUT

12”-26,5” 10”-24” 12”-26,5” 10”-24”

381 mm (15”)

Patented lever-free tool fits between the tyre and rim and takes hold of the bead, gradually lifting it without the aid of bead-lifter levers.

The exclusive working movement allows to catch the lower bead with no use of the plus device.

AUTOMATIC TYRE CHANGERS CRAB 7641.24+ PLUS 83+ g800 a11 1050 mm (41”)

OUT IN 10” - 24”CRAB 8641 Jointed and shaped Bead breaker Chucking table8641 with adjustable blade to facilitate bead 10”-24” The bead breaker opening can be CRAB V.24 2 SPEED 12”-26,5” positioning clampsIV.24 (2 slots). breaking.12”-26,5” Galvanised 10”-24” adjusted to work with extreme rapidity. CRABof 8641 2 SPEED cylinder with double operation.

381 mm (15”)

• Models with tubeless tyre inflation system. • The device is activated ok by a single pedal command with two positions.

CRAB 7641 CRAB 7641.24 SINGLE SPEED CRAB 7641 I.24 CRAB 7641 V.24 V CRAB 7641 IV.24 2 SPEED

IN 12”-26,5” 13”-24,5” 12”-26,5” 13”-24,5”

OUT 10”-24” 11”-22” 10”-24” 11”-22”

CRAB

CAR AND BIKE TYRE CHANGERS ok

CRAB 7441 CRAB 7441.20 SINGLE SPEED CRAB 7441 I.20 CRAB 7441 V.20 V CRAB 7441 IV.20 2 SPEED

• Heavy duty structure to guarantee proper working conditions at all times. • V-type = double rotation speed • Metal side cover • Grease bucket support • fl unit

OUT

12”-22,5” 12”-22,5” 12”-22,5” 12”-22,5”

10”-20” 10”-20” 10”-20” 10”-20”

opTIONS Tool with integrated protection for alloy rims.

PLUS 82 Air-driven device for bead pushing-raising

PLUS 83 + G 800 A48 Air-driven device for bead pushing-raising with rotating arm

G 800 A63 Shaft with pneumatic positioning of tool. Factory assembly

G 800 A11 Bead breaker protection

G 800 A18 Bead pushing roller

G 84 A 28 P Kit for quick change of all tools, including tool in plastic material

CRAB 7441.20

semi-automatic tyre changers swing series CRAB 7240 IN CRAB 7240.20 12”-22,5” CRAB 7240 I.20 12”-22,5”

OUT 10”-20” 10”-20”

optional proteCTIONS

CRAB 7240.20

CRAB 7240.BIKE

g800 a 11 k g800 a 8 g800 a 5 5 x kit 2 x kit 4 x kit

External clamping

5” - 24”

STANDARD Lever

PLUS 91 N bead top pressing and tyre lifting device for large tyres

CRAB

tyre changers for industrial and earthmoving vehicles BLUETOOTH TRASMISSION Electrohydraulic tyre changer for trucks, agricultural and ok earthmoving vehicles with rims between 11” and 56”

CRAB 10156.15

stand-by function after 5 sec. the machine has not been used, the motor turns off.

automatic functions crab 10156.15

rotation

lifting

movement

CRAB 10156.15 M Hydraulic controls on aerial arm. Manual movement lifting and rotation of tool.

minimum height 330 mm (13”)

11’’- 42’’ 11’’- 56” (G108A12)

2550 mm (100”)

minimum clamping 90 mm (4”)

1500 mm (59”)

Quick manual rotation

Ideal also for many 19” and 22,5” truck wheels.

The stepped claws allow 90 mm internal diameter clamping with no need of accessories.

CRAB

tyre changers for industrial and earthmoving vehicles

STANDARD -1 bead lifting lever -2 rim pliers

Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles. Hydraulic controls on aerial arm and chuck rotation ok control on movable consolle. Manual movement and rotation of the arm.

CRAB 9156.11 CRAB 9152.09

CRAB 9156.11

CRAB 9152.09

11’’- 42’’ 11’’- 56” (G108A12)

11’’- 37’’ 11’’- 52” (G108A12)

2350 mm (92,5”)

1100 mm (43”)

950 mm (37”)

opTIONS DATI TECNICI

TECHNICAL DATA

Motore rotazione mandrino Chucking unit rotation motor

G 108 A 12 4 of extensions

G 90 A 6 Clamp for alloy rims

G 90 A 3 Clamp for earth-moving wheels

G 108 A 5 Adapter with increased adherence

DATOS TÉC

Moteur rotation mandrin

Motor rotac

Motore centralina

Hydraulic drive unit motor

Moteur de la pompe

Motor unida

Ø cerchi

Rim Ø

Ø de la jante

Ø de llantas

Ø cerchi con G108A12

Rim Ø with G108A12

Ø de la jante avec G108A12

Ø de llantas

Ø est. ruota ammesso

Max. wheel Ø

Ø de la roue

Ø maximo e

Larghezza max. ruota

Max. allowed wheel width

Largeur maxi de la roue

Ancho max.

Peso

Weight

Poids

Peso

Bead breaker power GPotenza 108stallonatore A1 G 108 AForce 4 du détalonneur Max wheel weight Peso max ruota Poids maxi de la roue 4 clamp protections bead pushing Chuck rotation Velocità di rotazione Vitesse de rotation du formandrino alloy(giri/min) rims speed (rev/min) devicemandrin (tours/min.)

Force du dé Poids maxi

Velocidad d mandril (rev

Coppia max al mandrino

Max. torque to chuck

Couple max. au mandrin

Par máx al m

Pressione di lavoro

Operanting pressure

Pression de l’aire

Presión de

Tyre-changer for commercial vehicles wheels from 12” to 26”. The operating dimensions of the rim clamping unit and of the head-tool carriage allow ok to work on a whole range of wheels, including super-single.

CRAB 960

opTION

G 90 A 6 Clamp for alloy rims

DONNEES TECHNIQUES

standard

G 96 A 2 Tubeless roller

G 97 A 1 4 clamp protections for alloy rims

1 bead lifting lever

Double mount-demount tool for tube or tubeless tyres 19

COBRA

wheel balancers for motorcycles cars and light commercial vehicles

CO

COBRA 3140 HP + GAR 213 (option)

WEIGHT

Modern balancing system to minimize wheel weights consumption. Faster balancing thanks to less wheel spins and repositionning. Efficiency and money saving: eco-nomical and eco-logical

COBRA 3140 HP

Color monitor svga 17” fpga card Automatic measurement of distance and diameter up to 26” through digital calliper with optical sensor. The arm with weight pliers is designed for accurate and easy positioning of the weights on alloy rims and ok it stores the predetermined positions for balancing correction: automatic programs for alu s and pax wheels. Guided rim/tyre optimisation process.

Efficiency and money saving

AIR STOP

CO

WEIGHT

Calliper with alloy shaft on bushes

Automatic stop in the external unbalanced position

standard dotation for cobra 3140 hp - H and COBRA 2124 HP - H

gar 111 (Ø 44-104 mm)

gar 108 for HP versions

gar 101 for H versions

COBRA 2124 HP version with pneumatic locking device

CO

WEIGHT

Automatic spin when cover is lowered

• Hidden weight program • Motorcycle program for static and dynamic balancing • 4 alu programs ok • Automatic alu s programs • Rim/tyre optimisation

3 GAR 213 Calliper for automatic measurement of rim width

HP Versions with air locking

COBRA

wheel balancers for motorcycles cars and light commercial vehicles COBRA 2117H A low rotation speed balancer. Entry level model of the motorised range, the machine offers great value for money and occupies a very limited space, it also gives professional performances. ok cobra 2116h Same as 2117h but without wheel guard

COBRA 2117H

hidden weight mode

Standard dotation

gar 111 (Ø 44-104 mm)

COBRA

gar 105 (cobra 2116h - 2117h)

INTERACTIVE Backlit graphic lcd display, 132x40 mm. Multifunction and interactive keys to guide the operator

truck wheel balancers

COBRA 2120 HTLC COBRA 2120 HTL

equipped with wheel lift with 200 kg capacity cobra 2120 htlc complete with cones for trucks (Ø from 202 to 221 mm and 281 mm) with adapter and handwheel nut cobra 2120 htl complete with cones for light trucks (Ø from 118 to 174 mm) with adapter and handwheel nut

Wheel balancers with backlit graphic lcd display 132x40mm. Motorised automatic cycle. These versatile machines are designed for easy, fast and accurate balancing of motorcycle, car and commercial wheels.Microprocessor controlled with self-calibration and self-diagnostics. Specific balancing programs for static, dynamic and alloy wheels. One single spin with low rotation speed provides all the values. Display readout of out of balance values and related position on the wheel. Wheel diameter and width in inches or millimeters. Unbalance readout in grams or ounces.

standard dotation HTLC

STOP standard dotation HTL gar 122-gar 103 gar 114 (Ø 202-221; 281)

gar 114 (Ø 202 - 221; 281)

gar 113 (Ø 118 - 174)

gar 103

Automatic stop of the Anvil for weight wheel in the external adjustment unbalanced position

Calliper with alloy shaft on spherical bushes

LINX

WHEEL ALIGNER

Data bluetooth transmission allows maximum mobility between different working position

The wheel aligners linx 178 ws and 176 ws are easy to use and offers the user precision and rapidity. The display of the program and the data is completely realized in 3d graphics (19” monitor) The user has access to all programs by simply pushing on four command keys displayed on the screen that ok guide him step by step in the measuring. The aligner is equipped with a powerful pc, a a4 colour ink-jet printer and an useful compartment for wheel clamps deposit

linx 176 ws

standard

• 1 control unit with pc, monitor, key-board, printer and battery charger • 2 front measuring heads • 2 rear measuring heads • 1 brake pedal depressor • 1 steering wheel lock • instruction manual standard

STDA33EU 10”-24” Pair of self-centering 4 point clamps with removable claws

linx 178 ws S110A7 - Ø 310 mm (12.2”) turntables. Capacity 2x1000 kg

linx 808 tBTHR

standard

10”- 24” 10”-24”

Represent the latest technology in truck alignment. These new developed aligners feature state of the art components. Specific truck alignment software developed with and for truck alignment specialists. • significantly higher income production through superior efficiency • much faster operating times ok without any loss of accuracy • simpler system to learn, less training time involved • full range of accessories and options • adapter for trailer alignment

LINX 808 TBTHR - 8 CCD sensors LINX 806 TBTHR - 6 CCD sensors LINX 808 TBTH - 8 CCD sensors LINX 806 TBTH - 6 CCD sensors

LINX 808 TBTHR LINX 806 TBTHR front and rear heads have extended drop-down sensor frame 22

• bluetooth transmission between front heads and cabinet • infrared transmission between sensor heads • double inclinometer to allow caster adjustment without steering • we recommend the new no run out clamps stda92 enabling to skip run-out compensation procedure

LINX4D

work station for automatic alignment measurement A perfect quadrilateral is built around the vehicle. The measuring heads initially positioned in the corners of said quadrilateral move automatically to the front of the wheel targets, when the system is started. After about 7 seconds, the front and rear direct angles are measured and visualized, such as: • toe-in ok • toe-out • camber • thrust angle.

quick clamps the wheel clamps supplied with master 4d are patented and enable the installation of the target on the wheel in a safe and quick way.

run-out compensation the run-out compensation can be avoided thanks to the way the targets are installed and to their self-calibration. the run-out compensation can however be done either “by pushing” or with “free wheels”, according to the car manufacturer prescriptions flexibility the position of front plates and rear tables allow to operate on vehicle with a wheel base between 1800 mm and 4400 mm. turn plates and rear sliding tables front turn plates with electronic measurement of the steering angle. sliding tables with locking in central position and diagonal/transversal movements in both directions.

measuring heads The motorised master 4d measuring heads, installed on the lift, run a guide along the platforms. When not in use, the heads position themselves at the far end of the platforms, to facilitate the placement of the targets on the wheels. Simultaneously, a selfchecking procedure is started to constantly grant the utmost measuring precision. The data transmission between lift and console is performed by “bluetooth” technology. software The software is developed with “dotnet” technology on windows. 3d graphics and data bank with over 60.000 vehicles. HARDWARE Console with pc, 19” tft monitor, keyboard. RELIABILITY The system does not present functional limits deriving from room lightning and shape or condition of the target/vehicle. A special software checks and updates calibration at every single start of the test.

4 X CONTROLS

REAR DISPLAY

As many as 8 measurements per second with an accuracy of 0,005° (five thousands of a degree) allow the most accurate and quickest adjustment of the vehicle. 3 different program tests are available, to satisfy the different needs of the customers: • direct angles • direct angles + “quick caster” • direct angles + indirect angles (caster, kingpin) The following further tests can be added: • achermann • maximum steering • frame diagnosis • toe and caster adjustment with steered wheels

Technical data and composition presented in this catalogue may vary. Pictures reproduced are only indicative

Galleria Karol Wojtyla, 14 - 66020 San Giovanni Teatino (CH) - Italy - Tel. +39 085 44 65 702 - Fax +39 085 44 66 440 info@aspenautotech.com - www.aspenautotech.com by TRANS-LOGISTIC Group S.r.l. - Sede legale: via Brigata Bolero, 6 - 40069 - Zola Predosa (BO) - P. IVA 02096301201