Unit 24 Task 3
Production Log
Time Signature
What/how have you edited (Source, sound and tools Why did you edit it that way used)
00:27
Reverb tool – I used this whilst editing the first the seconds of the clip. I used this by clicking on channel EQ and scrolling down and clicking on stereo then changing the default to hall
I edited this this way so that it sounds like it was recorded in the real world and not in a recording studio by altering the dry and the wet noise the purpose became successful.
Fade tool was used from in almost every audio segment. There was a fade at the beginning and the end of the clip. It was most commonly used fading speaking to the audio track which plays throughout the entire clip. You fade by dragging the tool over the audio. ScissorsThis tool Is used by selecting scissors. Then you click on a audio track that you want to cut and it will cut it. Then you can either delete it or move it so it fits the original clip.
I used the fading tool so that the audio track and the characters speaking flowed nicely together and did not sound too rough.
00:33
00:48
00:52
Bus was used to route audio to certain places. It was found by clicking on command 2 and then clicking on bus 1.
01:02
Compressing is used to compress the pitch from your recorded audio so it sounds similar to the original one.
I used the scissors tool to cut up the audio from the most of the characters because in between lines there is often long silences or unneeded audio which would not fit the original clip so I used it to get the good bits in and delete the unwanted bits. If I did not the audio would not fit the original clip This tool was used so that audio could be sent to various other places. By using bus several audio clips can be mixed together.
I did this so that it fits the original clip