The step by step process of furniture recycling

The Step-By-Step Process Of Furniture Recycling

Furniture recycling can be one of the wisest steps that one can take, but experts say that it can be fruitful, only if a step-by-step process is followed.

Step 1 – Repairing

 In Case The Furniture Is Intact And Design Is Also Sound, This Step Can Be Skipped.  In That Case, You Should Start With Removing The Old Finish.  However, Repair Step Is Easy As It’ll Require Just A Few Tools And Equipment And Wood Glue.

Step 2 – Preparing The Work Area

 Select A Nicely Ventilated Or Open Area Like Outdoor Deck, Garage, Etc.  Your Furniture Refinishing Area Should Be Dry And Free Of Dust.  Use Masking Tape To Secure Newspaper Or A Large Drop Cloth To The Floor To Protect It From Spills.  Remove Drawers, Doors, Mirrors And Any Hardware.

Step 3 Of Furniture Recycling – Removing Old Finish

 Scrape The Old Varnish By Sanding Or Using Chemical Strippers.  You Can Also Use A Belt Sander For Quick Removal Of The Same.  Sanding Should Be Done Carefully Around The Curves And Decorative Areas.  Always Wear Rubber Gloves And Protective Goggles When Using Strong Chemicals.  Always Wear Gloves And Protective Goggles And A Dust Mask While Sanding.  The Work Area Should Be Well-ventilated.

Step 5 – Paint Application

 Apply Water-based Paint By Brushing With Even Strokes In The Direction Of The Wood Grain.  The Second Coat Should Be Applied Within 1 Hour Of The First Coating Or After 24 Hours.

Step 4 – Apply Primer

 Using A Paintbrush, Apply A Coat Of White Or Gray Water-based Primer.  Allow It To Dry For Up To 2 Hours And Then Apply The Second Coat And Let It Dry For 24 Hours Before The Final Step Of The Process Of Furniture Recycling.