Lululemon Spatial Brand Identity Research
355 Burrard St, Marine Building Vancouver’s best suviving example of the Art Deco style in local architecture. Tower of 21-story building that rises above a 4-story podium. Steel frame and concrete floor slabs, and terra cotta bas-relief ornaments (in pink and green).
Values & Brand Identity Canadian company founded in Vancouver in 1998, Lululemon Athletica is a technical apparel company that encourages physical movement through different disciplines such as running, weight training, but mostly known for yoga. They revolve their brand identity around the culture shared as a community, that seeks to inspire great conversations and a safe place where everyone learns from one another.
Lighting Design The Robson store displays 3 different layers of lighting throughout the store, to add emphasis to certain areas, but also as a design feature that characterizes their stores. A base layer of downlights are complemented by pendants, and cove lighting for extra luminance. Circular pendants also float throughout the ceiling to add more light sources (as they are bigger) in main spaces such as aisles in the store.
Ceiling Design The store features a mega-structure that is repeated in the ceiling design 3 to 4 times. It consists of a spiral that originates from the center of a circumference, and it is later expanded until it outlines the silhouette of the brand’s famous logo. By this, they reinforce the brand experience represented with a design feature in their Robson store that is memorable for the customer (even if they do not see it right away).
Applied Materiality The Robson store is characterized by 3D square tiles, that add texture and character to the design. In their drop ceilings, they feature a light oak color wood, and also in some other areas of the ceiling to hide track lighting. For the flooring of the store, they designed a concrete flooring that plays in tone to create some contrast on the floor that reflects the curvatures of the ceiling.
DANIELLE GASCA / 1842084 Research conducted on Robson St store
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
LULULEMON ATHLETICA #408 - 355 BURRARD STREET, VANCOUVER, B.C. V6C 2G8
N CONTACT INFORMATION
GENERAL NOTES
CLIENT/TENANT: LULULEMON ATHLETICA 970 ROBSON STREET VANCOUVER, B.C., V6Z 2E7 CONTACT 604.681.3118 ROBSON-STORE@LULULEMON.COM
OWNER: OXFORD PROPERTIES GROUP 1012 W HASTINGS ST VANCOUVER, B.C., V6C 0C3 CONTACT 604.893.3200 HELLO@OXOFORDPG.CA
1.
ALL WORK TO MEET THE REQUIREMENTS OF THE BRITISH COLUMBIA BUILDING CODES AND ALL OTHER AUTHORITIES HAVING JURISDICTION OVER THE WORK.
2.
ALL BUILDING REQUIREMENTS FOR PERSONS WITH DISABILITIES TO BE MET IN ACCORDANCE WITH SECTION 3.1 OF THE BC BUILDING CODE.
INTERIOR DESIGNER: DGS INTERIORS 165 PEMBERTON AVE NORTH VANCOUVER, B.C. V7P 2R4 CONTACT 604.857.6265 INFO@DGS-INTERIORS.COM
ELECTRICAL CONSULTANT: HALL ELECTRICAL LTD. 120-2055 COMMERCIAL DR VANCOUVER, B.C., V5N 0C7 CONTACT 604.836.0181 INFO@HALLELECTRICAL.CA
3.
CONTRACTOR TO CONFIRM ALL EQUIPMENT AND MILLWORK DIMENSIONS ON SITE AND COORDINATE WITH TRADES PRIOR TO MANUFACTURING AND TO REPORT ALL DISCREPANCIES TO THE INTERIOR DESIGNER.
CODE CONSULTANT: LMGD BC CONSULTANT LTD. 780 BEATTY ST VANCOUVER, B.C., V6B 2M1 CONTACT 604.682.7146 KEVIN@LMDG.COM
MECHANICAL CONSULTANT: SUMMIT CONSULTANTS 301-1155 PENDER ST VANCOUVER, B.C., V6E 2P4 CONTACT 778.245.7501 INFO@SUMMIT.CA
DESIGNED BY
4.
CONTRACTOR TO PROTECT ALL UNAFFECTED BASE BUILDING ELEMENTS DURING CONSTRUCTION AND MAKE GOOD ANY DAMAGE CAUSED BY CONSTRUCTION.
5.
CONTRACTOR AND SUB-CONTRACTORS TO CAREFULLY INSPECT THE SITE TO DETERMINE IF CONDITIONS ARE AS REPRESENTED IN THE DRAWINGS. ALL DISCREPANCIES SHALL BE REPORTED TO THE INTERIOR DESIGNER.
6.
THE CONTRACTOR IS RESPONSIBLE FOR CONSTRUCTION SAFETY ON SITE AND SHALL ENSURE ALL WORK PERFORMED IS IN ACCORDANCE WITH PROVINCIAL AND/OR NATIONAL CONSTRUCTION SAFETY GUIDELINES
7.
CONTRACTOR MUST ADHERE TO THE BASE BUILDING OWNER AND PROPERTY MANAGER'S CONSTRUCTION GUIDELINES.
DRAWING LIST
ANY MATERIALS AND CONSTRUCTION WORKMANSHIP WHICH THE INTERIOR DESIGNER'S OPINION IS DEFICIENT SHALL BE MADE GOOD AT THE CONTRACTOR'S EXPENSE
1 ID0.00
9.
INTERIOR TENANT IMPROVEMENTS INCLUDE PARTIAL REMOVAL OF INTERIOR PARTITIONS, DOORS, AND MILLWORK. IMPROVEMENTS ALSO INCLUDE THE REUSE/RELOCATION OF EXISTING DOORS. ALL INTERIOR FINISHES TO BE NEW.
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
SITE PLAN NTS
INTERIOR DESIGN DRAWINGS ARE TO BE READ IN CONJUNCTION WITH ARCHITECTURAL, STRUCTURAL, MECHANICAL AND ELECTRICAL CONSULTANT'S DRAWINGS
10. CONTRACTOR TO COORDINATE FINAL INSPECTION WALK-THROUGH WITH INTERIOR DESIGNER AND CLIENT PRIOR TO OCCUPANCY
Project:
LULULEMON OFFICE # 408 - BURRARD ST VANCOUVER, B.C. V6C 2G8
CODE ANALYSIS - VANCOUVER BUILDING BYLAW SUITE 408 2,042 SQ. FT.
TENANT AREA: EXISTING AREA: NEW AREA: TOTAL: OCCUPANT LOAD: GROUP D BUSINESS
PROJECT #
189.71 M2 (2,042 S.F.) N/A 189.71 M2 (2,042 S.F.)
ID440_SP21
Sheet Title DN UP
COVER SHEET
MECH
9.3
UP
DN
189.71 M2 / 9.3 - 20 PERSONS
SCOPE OF WORK
Date
HA
LOT 1 BLOCK 1 PLAN VAP92 DISTRICT LOT 185 LAND DISTRICT 36 EXC PT IN PL PID: 002-512-602 LOT 2 BLOCK 1 PLAN VAP92 DISTRICT LOT 185 LAND DISTRICT 36 EXC PT IN PL PID: 002-512-629
8.
T
LEGAL DESCRIPTION
No.
EE
COVER SHEET DEMOLITION PLAN CONSTRUCTION PLAN REFLECTED CEILING PLAN ELEVATIONS ELEVATIONS ELEVATIONS SECTIONS DETAILS FINISHES PLAN SCHEDULES FURNITURE & ELECTRICAL PLAN DOOR AND HARDWARE SCHEDULE
1
Issue Description
STR
ID0.00 ID0.01 ID1.00 ID1.01 ID2.00 ID2.01 ID2.02 ID3.00 ID4.00 ID5.00 ID5.01 ID6.00 ID7.00
No.
GS
SHEET TITLE
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM
STIN
SHEET NO.
DGS INTERIORS
TRAVEL DISTANCE: MAX. DISTANCE: 25M DISTANCE PROVIDED: 19.50M
BURRARD STREET
Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1'-0" = 1/32"
Drawing Issue
PLUMBING FACILITIES AVAILABLE WITHIN BASE BUILDING COMMON AREA CORE
FOR TENDER 2 ID0.00
KEY PLAN
Drawing Sheet No.
NTS
ID0.00
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
N DEMOLITION GENERAL NOTES 1.
ALL WORK MUST COMPLY WITH THE BC BUILDING CODE AND THE CITY OF VANCOUVER. 2. DEMOLITION DRAWINGS TO BE READ IN CONJUNCTION WITH OTHER CONSULTANT'S DEMOLITION DRAWINGS. 3. ALL WORK IN BUILDING MUST COMPLY WITH BUILDING OWNER'S REGULATIONS. 4. CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVAL OF ALL DEMOLISHED ITEMS AND DEBRIS FROM SITE UNLESS OTHERWISE NOTED. COORDINATE EXTERIOR DEBRIS BIN LOCATIONS WITH OWNER. 5. ALL CONSTRUCTION DEBRIS MUST BE DISPOSED OF IN ACCORDANCE WITH THE CONSTRUCTION WASTE MANAGEMENT SECTION IN THE DRAWING SPECIFICATIONS. 6. PATCH AND MAKE GOOD ANY EXISTING ITEMS AFFECTED BY DEMOLITION. 7. CONTRACTOR TO TAKE PRECAUTIONS PROTECT EXISTING AREAS UNAFFECTED BY CONSTRUCTION. CONTRACTOR RESPONSIBLE FOR ANY DAMAGE TO UNAFFECTED AREAS. 8. COORDINATE DEMOLITION WITH MECHANICAL, ELECTRICAL, AND STRUCTURAL DRAWINGS. CONTRACTOR TO ENSURE ALL ELECTRICAL AND PLUMBING IS CAPPED OFF AND LEFT IN A SAFE CONDITION. SHUT OFF VALVES REQUIRED FOR ALL PLUMBING AND HVAC SERVICES. 9. CONTRACTOR TO RETAIN ANY EXISTING HEALTH AND SAFETY SIGNAGE AND REINSTALL TO SUIT NEW LAYOUT. 10. EXISTING MILLWORK TO BE REMOVED. 11. EXISTING DOORS TO BE REMOVED AND SAVED FOR REUSE. 12. EXISTING INTERIOR GLAZING TO BE REMOVED, SALVAGE ALL GLAZING FOR REUSE IN NEW LAYOUT.
DESIGNED BY DGS INTERIORS
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No. 1
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
DEMOLITION KEY NOTES 01
EXISTING MILLWORK TO BE REMOVED AND DISCARDED. MAKE GOOD FLOORS AND WALLS TO RECEIVE NEW FINISHES. No.
LEGEND AREA NOT IN CONTRACT
01 01
EXISTING PARTITION TO BE REMOVED 01
EXISTING GLAZING TO BE REMOVED EXISTING EXTERIOR, CORE AND PARTITION TO REMAIN EXISTING WALL TO REMAIN
Project:
LULULEMON OFFICE # 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8 PROJECT #
EXISTING DOOR TO REMAIN. REMOVE PRIOR TO DEMOLITION AND SAVE FOR CONSTRUCTION.
ID440_SP21
Sheet Title
DEMOLITION PLAN EXISTING DOOR TO BE REMOVED
1 ID0.01
DEMOLITION PLAN 1/4"=1'-0"
Date:
04/05/21
Drawn By:
DANIELLE GASCA
Checked By:
SS
Scale:
1/4"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID0.01
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
N
CONSTRUCTION PLAN NOTES 1.
2. 3.
4. W2
5. 6. 01
1 ID3.00
18'-8"
7. 14'-0
3" 8'-7 4
OFFICE B 408
W1
11'-1"
"
MEETING ROOM 409
2 ID2.01
BOARD ROOM 410
11'-1"
4 ID2.01
11.
W1
01 W1
W4
2'-0"
2'-4"
3'-0"
2'-0"
2'-0"
W1
13.
DGS INTERIORS
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No. 1
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
3'-0"
KEY NOTES
W3 1'-11"
4 ID2.00 2'-6"
15'-7"
3 ID2.00
3'-0"
STAFF KITCHEN 404
2 ID2.00
W1
D-01
ENTRANCE 401
1
ALIGN NEW PARTITION TO ADJACENT EXISTING FACE OF COLUMN AS NOTED.
2
ALIGN NEW BUILT-IN MILWORK TO ADJACENT EXISTING FACE OF COLUMN AS NOTED.
GENERAL LEGEND
WAITING AREA
2 XX D I 3.
3 ID2.02
2 ID2.XX
3 X ID2.X
WORKSTATIONS 406
RECEPTION 403
NEW WALL
402
EXISTING EXTERIOR, CORE AND PARTITION TO REMAIN
5'-614"
11'-434" 5'-443"
SAMPLE LIBRARY 405
NEW DOOR, REFER TO DOOR AND HARDWARE SCHEDULE
AREA NOT IN CONTRACT
1 ID2.00
8'-10"
W1
1 XX ID3.
6'-414"
6'-0"
DESIGNED BY
403.1
D-03
" 12'-0
9'-134"
3'-0"
3 ID2.01
HALLWAY
12.
W1
D-02
D-03 11'-234"
3'-4"
2 00 ID3.
W4
1 ID2.01
2'-543"
D-03
OFFICE A 407
8. 9. 10.
CONTRACTOR TO CO-ORDINATE WORK WITH THE BUILDING MANAGER. ANY WORK WHICH MAY DISRUPT OTHER OCCUPANTS' ACTIVITY SHALL BE DONE AFTER NORMAL BUSINESS HOURS. CONTRACTOR TO ENSURE CONTAMINANTS ARE NOT SPREAD TO ADJACENT AREAS. DESIGN CONSULTANT'S DRAWINGS SHALL BE READ IN CONJUNCTION WITH STRUCTURAL, MECHANICAL, AND ELECTRICAL CONSULTANT'S DRAWINGS. CONTRACTOR SHALL CONFIRM ALL DIMENSIONS ON SITE PRIOR TO CONSTRUCTION. DISCREPANCIES IN DRAWINGS SHALL BE REPORTED TO THE DESIGNER PRIOR TO SUBMISSION. NO CONTRACT REVISIONS OR EXTRAS WILL BE ALLOWED FOR FAILURE TO VERIFY SITE CONDITIONS AND DIMENSIONS. CONTRACTOR SHALL CO-ORDINATE FINAL INSPECTION DATE WITH DESIGNER PRIOR TO MOVE IN. CONTRACTOR SHALL CONFIRM SIZES OF OWNER'S EQUIPMENT & APPLIANCES. ALL MATERIAL AND WORKMANSHIP MUST BE WARRANTED FOR TWO YEARS FROM THE DATE OF SUBSTANTIAL COMPLETION. CONTRACTOR SHALL PROTECT EXISTING FINISHES FROM DAMAGE DURING CONSTRUCTION. REPAIR AND MAKE GOOD ALL SURFACES AFFECTED BY DEMOLITION/CONSTRUCTION. CONTRACTOR TO X-RAY SLAB PRIOR TO ANY CUTTING OR DRILLING. DESIGNER/OWNER TO APPROVE PARTITION LAYOUT PRIOR TO BOARDING. CONSTRUCTION FOR ALL PARTITION TYPES MUST MAINTAIN ACOUSTICAL INTEGRITY AND FIRE RATING OF WALL. ALL WALLS ABUTING EXTERIOR GLAZING TO BE CENTERED ON THE MULLION, UNLESS OTHERWISE INDICATED IN PLAN. ENSURE A SOUND AND LIGHT TIGHT CONNECTION. CONTRACTOR TO INSTALL NECESSARY BLOCKING IN WALL AT LOCATION OF NEW MILLWORK, FURNISHINGS, FIXTURES, AND EQUIPMENT PRIOR TO GWB BEING INSTALLED. INSTALL LEVEL AND PLUMB, RIGIDLY ANCHORED TO SUBSTRATE. TELEPHONE AND DATA ARE TO BE SUPPLIED AND INSTALLED BY CLIENT. CONTRACTOR TO SUPPLY AND INSTALL ALL REQUIRED CONDUIT AND BOXES (AS PER ELECTRICAL DRAWINGS).
D-TAG
X IDX.XX
ELEVATION SYMBOL
NEW INTERIOR GLAZING
W2
ROOM NAME
XXX
ROOM NAME AND ROOM NUMBER
PARTITION LEGEND W1
No.
W1
W2
NEW INTERIOR PARTITION TO U/S OF SLAB (MATCH EXISTING) 1 5 2" GWB BOTH SIDES OF 3 8" STEEL STUBS @16" O.C. C/W R12 ACOUSTIC BATT INSULATION TO U/S OF SLAB ABOVE. PATCHED & SANDED READY FOR FINISH. NEW INTERIOR PARTITION RADIUS CURVE INSTALLATION WITH 14" GWB AT 48" AFF. PATCHED & SANDED READY FOR FINISH.
Project:
LULULEMON OFFICE # 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8 PROJECT #
ID440_SP21
Sheet Title
W3
W4
1 ID0.02
CONSTRUCTION PLAN 1/4"=1'-0"
NEW INTERIOR PLUMBING WALL ½” GWB BOTH SIDES OF 5” STEEL STUDS @ 16” OC. C/W ACOUSTIC BATT INSULATION TO U/S OF T-BAR CEILING. PROVIDE GASKET & CAULKING WHERE WALL MEETS T-BAR. NEW INTERIOR GLAZING PARTITION TO 8'-6" A.F.F. 12MM CLEAR LAMINATED GLASS WITH WALL TYPE 2 ABOVE TO U/S OF SLAB. GLASS IN TOP AND BOTTOM U-CHANNELS.
CONSTRUCTION PLAN Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/4"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID1.00
REFLECTED CEILING PLAN NOTES 1.
MEETING ROOM 409
BOARD ROOM 410
D1
D1
D1
D1
D1
D2 D1 D1
D2
OFFICE B 408
9'-0" AFF
D1
D1
D1
D1
D1
D1
D1
9'-0" AFF
9'-0" AFF
OFFICE A 407
HALLWAY 403.1
D1
D1
D1
D1
D1
D1
D1
THIS DRAWING INDICATES EXISTING CEILING, NEW CEILING CONSTRUCTION AND FINISHES. FOR COMPLETE LIGHTING REQUIREMENTS, REFER TO ELECTRICAL DRAWINGS. COORDINATION IS REQUIRED BETWEEN ARCHITECTURAL AND ELECTRICAL DRAWINGS REPORT ANY DISCREPANCIES TO DESIGNER IMMEDIATELY. 2. REFER TO ELECTRICAL AND MECHANICAL CONSULTANTS DRAWINGS FOR TECHNICAL INFORMATION INCLUDING CIRCUITRY, POWER REQUIREMENTS, DIFFUSER LOCATIONS AND SWITCHING, ETC. 3. THE CONTRACTOR SHALL REFER TO ELECTRICAL AND MECHANICAL CONSULTANTS DRAWINGS AND SPECIFICATIONS FOR ALL NIGHT LIGHTS, EMERGENCY LIGHTING, EXIT SIGNS, AND FIRE PROTECTION EQUIPMENT AS REQUIRED BY THE LOCAL BUILDING CODE. CONTRACTOR IS RESPONSIBLE FOR INSTALLING ALL LIFE SAFETY MECHANICAL AND SPRINKLERS, FIRE EXTINGUISHERS IN ACCORDANCE WITH CODE REQUIREMENTS FOR QUANTITY AND PLACEMENT, TO SUIT THE NEW LIGHTING LAYOUT. 4. BASE BUILDING MECHANICAL TO BE ADJUSTED TO SUIT NEW PARTITION LAYOUT AND EQUIPMENT/OCCUPANT LOAD (REFER TO MECHANICAL CONSULTANTS DRAWINGS). THE CONTRACTOR IS RESPONSIBLE FOR BALANCING THE AIR FOLLOWING MOVE-IN AND SUBMITTING A REPORT TO THE CLIENT. 5. CONTACT DESIGNER FOR APPROVAL ON LOCATIONS OF ALL LIGHT FIXTURES, AND SPEAKERS PRIOR TO INSTALLATION. 6. THE CONTRACTOR SHALL VERIFY ALL FIELD CONDITIONS AND LOCATIONS OF ALL PLUMBING, DUCTS, STRUCTURAL ELEMENTS AND ANY OTHER APPLICABLE ITEMS.ARRANGE AND MODIFY NONVISIBLE ITEMS TO ENSURE ADEQUATE CLEARANCES FOR CEILING AND LIGHTING LAYOUT AS SHOWN. IF ANY OBSTRUCTIONS INTERFERE WITH LIGHTING LAYOUT NOTIFY DESIGNER IMMEDIATELY PRIOR TO COMMENCING WITH INSTALLATION. 7. WITHIN (2) TWO WEEKS OF COMPLETION OF PROJECT, MECHANICAL AND ELECTRICAL CONTRACTORS SHALL PROVIDE 'AS BUILT' DRAWINGS TO THE CLIENT. 8. PROVIDE FLUCH MOUNTED SPRINKLERS FOR ALL GWB CEILINGS UNLESS OTHERWISE NOTED. 9. CONTRACTOR TO PROVIDE DRYWALL ACCESS PANELS AS REQUIRED. COORDINATE SIZE AND LOCATION OF ALL ACCESS PANELS WITH DESIGNER PRIOR TO INSTALLATION. 10. ALL SWITCHES AND FACEPLATES TO BE DECORA STYLE, WHITE. ALL SWITCHES AND DIMMERS ARE TO BE LOCATED AT 39” AFF TO CENTERLINE OF SWITCH PLATE UNLESS OTHERWISE SPECIFIED.
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
N
DESIGNED BY DGS INTERIORS
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No. 1
COVE LED LIGHT
D1
10'-0" AFF
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
KEY RCP NOTES
9'-0" AFF
1. D1 D1
STAFF KITCHEN D1 404
D1
D1
D1
D1 COVE LED LIGHT
D1
8'-0" AFF
D1
D1
D1
ENTRANCE 401
RECEPTION 403 D1
10'-0" AFF
WORKSTATIONS 406
D1
3.
WAITING AREA D1
402
2.
D1
4.
FULL HEIGHT CEILINGS WITH EXPOSED MECH/ELEC SYSTEMS. ALL MECH/ELEC ITEMS TO BE PAINTED TO MATCH TYP. CEILINGS UNLESS INDICATED OTHERWISE. SUPPLY AND INSTALL NEW GWB BULKHEAD AS INDICATED IN PLAN. REFER TO ELEVATION, SECTION AND DETAIL DRAWINGS FOR CONSTRUCTION INSTALLATION. NEW CEILING MOUNTED PROJECTOR TO BE SUPPLIED AND INSTALLED BY CLIENT. CONTRACTOR TO SUPPLY AND INSTALL POWER AND DATA REQUIREMENTS AS PER ELECTRICAL CONSULTANT'S DRAWINGS. CONTRACTOR TO PROVIDE ADEQUATE STRUCTURAL SUPPORT IN CEILING PLENUM FOR EQUIPMENT. NEW CEILING ITEM TO BE SUPPLIED AND INSTALLED BY CLIENT. CONTRACTOR TO SUPPLY AND INSTALL POWER AND DATA REQUIREMENTS AS PER ELECTRICAL CONSULTANT'S DRAWINGS. CONTRACTOR TO PROVIDE ADEQUATE STRUCTURAL SUPPORT IN CEILING PLENUM FOR EQUIPMENT. A. COULD BE PROJECTION SCREEN (RECESSED OR SUSPENDED)
No.
CEILING LEGEND
D1
PROPOSED CEILING DROP IN ENTRANCE AND HALLWAY. CEILING HEIGHT TO BE 9'-8" AFF. CEILING DROP TO BE COVERED IN WOOD FINISH SPECIFIED IN FINISH SCHEDULE.
D1
HT LIG RID D E L NG S I NG D A LI P CEI
PROPOSED CEILING DROP IN KITCHEN AND COLLABORATIVE ZONE. CEILING HEIGHT TO BE 9'" AFF. CEILING DROP TO BE COVERED IN WOOD FINISH SPECIFIED IN FINISH SCHEDULE.
SAMPLE LIBRARY 405
Project:
LULULEMON OFFICE # 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
LIGHTING LEGEND
D1 D2 1 ID0.02
REFLECTED CEILING PLAN
PROJECT #
ID440_SP21
RECESSED DOWNLIGHT
Sheet Title
FEATURED PENDANT
REFLECTED CEILING PLAN
UNDER CABINET STRIP LIGHT
1/4"=1'-0"
LED LIGHT PAD
Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/4"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID1.01
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
4
WC1
P1
2'-10"
EXIT
M1
10'-0"
6'-6"
2'-10"
lululemon athletica
T1
10'-0"
OPEN TO BACK OF OFFICE
2'-10"
ID2.00
3 ID2.00
1
6'-10"
ID2.00
DESIGNED BY DGS INTERIORS
4'-0"
P1
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM
4"
4"
3'-2"
W3
14'-3"
5'-1"
2'-8"
19'-3"
1 ID2.00
19'-3"
2 ID2.00
ELEVATION - RECEPTION DESK
No.
ELEVATION - ENTRANCE DOOR
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
SCALE: 1/2"=1'-0"
1
SCALE: 1/2"=1'-0"
No.
5
1'-0"
ID2.00
1'-10"
WC1
TEMPERED GLASS FOR WINDOWS
BLACK METAL FRAMING
G1
Project:
2'-10"
LULULEMON OFFICE G2
10'-0"
10'-0"
M1
SIDE OF MILLWORK
# 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
G1
2 ID2.00
6'-10"
PROJECT #
ID440_SP21
3'-8"
Sheet Title
ELEVATION DRAWINGS 4"
4"
W3
2'-6"
P2
6'-0"
4'-0"
6'-4"
18'-5"
3 ID2.00
ELEVATION - ACROSS RECEPTION AREA SCALE: 1/2"=1'-0"
6'-0" EQ 18'-8"
4 ID2.00
ELEVATION - BOARD ROOM ENTRANCE SCALE: 1/2"=1'-0"
Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/2"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID2.00
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
3'-2"
4'-4"
P1 2'-2"
4'-4"
3'-8"
2 ID2.00
1'-0"
1'-10"
1'-10"
SIDE OF MILLWORK SPECIFIED ON SECTION A1
W3
1"
M1
3'-2"
P2
P2
3'-0"
P2
W1 TV PROVIDED BY OTHERS
9'-0"
2 ID2.00
DESIGNED BY
W3
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM
4"
4"
4'-0"
WC1
4'-2"
DGS INTERIORS
5'-6"
1 ID2.01
5'-8" EQ
2'-8"
2 ID2.01
BOARD ROOM ENTRANCE
2'-8"
PRESENTATION WALL
No.
SCALE: 1/2"=1'-0"
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
SCALE: 1/2"=1'-0"
1
1'-10"
No.
P1
Project:
LULULEMON OFFICE
6'-3"
P2
# 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
W1
PROJECT #
ID440_SP21
3'-5"
4'-0"
Sheet Title
ELEVATION DRAWINGS
4"
10'-0"
3'-2"
WD1
2'-8"
17'-7"
1 ID2.01
GREEN WALL- HALLWAY SCALE: 1/2"=1'-0"
2 ID2.01
COFFEE STATION SCALE: 1/2"=1'-0"
5'-8" EQ
Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/2"=1'-0"
2'-8"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID2.01
1'-10"
G1
W3
7'-2"
9'-0"
9'-0"
G1
2'-0"
G1
2'-0"
G1
3'-8"
1'-10"
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
3'-8"
7'-2"
P4 W3
P4 DESIGNED BY
1 ID2.02
2'-0"
G1
3'-0"
8'-9"
2 ID2.02
OFFICE A SCALE: 1/2"=1'-0"
1'-6"
G1
8'-9"
4"TYP
1'-6"
4"TYP
DGS INTERIORS
2'-0"
3'-0"
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM
OFFICE B SCALE: 1/2"=1'-0"
No. 1
No.
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
4 ID2.00
W2
Project:
9'-0"
5'-4"
LULULEMON OFFICE # 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
P1
PROJECT #
ID440_SP21
3'-4"
Sheet Title
ELEVATION DRAWINGS 2'-1"
2'-7" 2"
3 ID2.02
STAFF KITCHEN SCALE: 1/2"=1'-0"
2'-0"
4'-0" EQ
2'-7" EQ
2'-0" 2"
Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/2"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID2.02
10"
CURVE RADIUS 6' GYPSUM WALL BOARD 1 2"
2" 1
3 4
3 4"
PLYWOOD COUNTER W/WOOD VENEER FINISH ALL EXPOSED SIDE
PLYWOOD WITH P1 PANEL
2'-0"
BASE 34" PLYWOOD TO MATCH DESK TOP WHITE
2
4"
4"
FINISH IN PAINT WHITE SEE MATERIALS TABLE
3
4"
3
1 ID4.00
3
BASE 34" PLYWOOD TO MATCH DOOR WALNUT VENEER
ID4.00
FROSTED TEMPERED GLASS
2'-0"
GYPSUM WALL BOARD 2"
2"
4"
1 2
1
61
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
CURVE MILLWORK RADIUS 6' WALNUT VENEER
ID4.00
1'-5" CABINET BOTTOM 34" PLYWOOD W/ PLAM FINISHES ALL EXPOSED SIDES
4"
FLOORING COVERED WITH CARPET SEE FINISHES PLAN FOR REFERENCE
2'-10"
STEEL DOWEL PLACES 1 12" O.C.
TAMBOUR SLIDING DOOR CABINET
1'-0"
WHITE GLOSS SHEET 4' X 8'
2'-6"
8"
10"
1'-5"
8"
1 4"
2'-4"
2'-6"
3'-512"
2"
CABINET BACK 38" MDF, MELAMINE FINISH EXPOSED SIDE
4'-0"
5"
8"
INTERIOR FINISH TO BE MELAMINE
DESIGNED BY 1
1 ID2.00
3"
4"
DGS INTERIORS
SECTION - RECEPTION
2 ID2.00
SCALE: 1"=1'-0"
SECTION - DRAWER FILE
3 ID2.00
SCALE: 1"=1'-0"
SECTION - CURVED WALL
2 ID2.00
SCALE: 1"=1'-0"
SECTION - COFFEE STATION SCALE: 1"=1'-0"
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No. 1
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
1'-9"
1 2"
1'-10"
4"
10MM TEMPERED GLAZING
1'-53 SCRIBE FINISH TO MATCH MILLWORK CONTINUATION
GWB FINISH TO BE WHITE HIGH GLOSS SHEATS
2'-10"
FINISH TO BE WHITE HIGH GLOSS SHEATS
CLEAR CAULKING
2"
FINISH TO BE WHITE HIGH GLOSS SHEATS
WALNUT VENEER FINISH
SOLID WOOD FRAME 1 2"
No. CEILING LINE
SCRIBE FINISH TO MATCH MILLWORK
1"
2'-10"
CEILING LINE
CEILING LINE
CEILING LINE
CLEARANCE
1'-1"
3 ID4.00
1'-43 8" TYP
ADJUSTABLE SHELVES PL-2 ALL SIDES
INTERIOR FINISH TO BE MELAMINE
CONTINUATION OF WALNUT VENEER FINISH ON SIDE PANELS
4" 2"
ADJUSTABLE SHELVES PL-2 ALL SIDES LED CABINET LIGHT BY MILLWORK CONTRACTOR. **ELECTRICIAN TO PROVIDE POWER AND HOOKUP FOR LIGHTING INSTALLATION.**
TV MOUNTED AT THIS HEIGHT SHELF PLYWOOD W/PLAM FINISH ALL SIDE
DOOR 34" PLYWOOD W/ WOOD VENEER ALL SIDES
TYP
BACK PANEL 38" MDF PANEL W/WOOD VENEER FINISH ALL EXPOSED SIDE
4"
1'-73 8"
PUSH OPENING DOOR SYSTEM
ID4.00
1" GREY CORIAN WITH EASED EDGE 1 2"
O.C.
STEEL DOWEL PLACES 1 12" O.C.
GREY CORIAN CONTINUATION FOR BACKSPLASH
DOOR 34" PLYWOOD W/ WOOD VENEER ALL SIDES
SHELF PLYWOOD W/PLAM FINISH ALL SIDE
INTERIOR FINISH TO BE MELAMINE
BASE 34" PLYWOOD TO MATCH MILLWORK
3 4"
CABINET BOTTOM PLYWOOD W/ PLAM FINISHES ALL EXPOSED SIDES
1'-0"
3"
Sheet Title
SECTION DRAWINGS Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1"=1'-0"
4"
BASEBOARD
3"
FOR PERMIT
2'-0"
2"
4 ID2.00
SECTION - CLOSET SCALE: 1"=1'-0"
2 ID2.00
SECTION - BOARD ROOM SCALE: 1"=1'-0"
2 ID2.00
SECTION - TV WALL SCALE: 1"=1'-0"
ID440_SP21
Drawing Issue
4"
CONTINUATION OF WALNUT VENEER FINISH ON SIDE PANELS
3'-0"
2'-6"
SHELF PLYWOOD W/PLAM FINISH ALL SIDE
4"
1 2"
CABINET BACK 38" MDF, MELAMINE FINISH EXPOSED SIDE
SHELF PLYWOOD W/PLAM FINISH ALL SIDE
CABINET BOTTOM 34" PLYWOOD W/ PLAM FINISHES ALL EXPOSED SIDES
ID4.00
INTERIOR FINISH TO BE MELAMINE
4"
SHELF PLYWOOD W/PLAM FINISH ALL SIDE
TYP
5'-3" 2'-6"
INTERIOR FINISH TO BE MELAMINE
PAINTED REVEAL
3
PROJECT #
112"
PUSH OPENING DOOR SYSTEM
3
STEEL DOWEL PLACES 1
1 2"
LULULEMON OFFICE # 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
BOARD ROOM DOOR METAL FRAME, TEMPERED GLASS
6'-10"
3
3
TV BACKDROP TO BE PAINTED IN GREY SEE ELEVATION AND SPECS
Project:
2 ID2.00
SECTION - KITCHEN SCALE: 1"=1'-0"
Drawing Sheet No.
ID3.00
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
3 4"
CORIAN 34" PLYWOOD COUNTER MITER AND CHAMFER EDGE
3 4"
4"
1
4"
3 3
DESIGNED BY
4"
3
1 2"
PAINTED REVEAL
1
4"
1
2"
3 1 2"
DGS INTERIORS
3
4"
3 4" 4"
1
2"
1
4"
4"
112"
3
PLYWOOD W/ WOOD VENEER ALL EXPOSED SIDES
3 4" 4"
10"
PAINTED REVEAL
ROUNDED EDGE DOOR 34" PLYWOOD W/ WOOD VENEER ALL SIDES
DOOR 34" PLYWOOD W/ WOOD VENEER ALL SIDES
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No.
1 ID4.00
DETAIL - RECEPTION
2 ID4.00
SCALE: 3"=1'-0"
DETAIL - FILE DRAWER
4 ID2.00
DETAIL - KITCHEN COUNTER
1
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
SCALE: 3"=1'-0"
SCALE: 3"=1'-0"
No.
LED CABINET LIGHT BY MILLWORK CONTRACTOR. **ELECTRICIAN TO PROVIDE POWER AND HOOKUP FOR LIGHTING INSTALLATION.**
Issue Description
Project:
LULULEMON OFFICE 1
2"
113 4"
3
# 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
4"
1'-1"
PROJECT # 1 2"
3 ID2.00
CORIAN BACKSPLASH
DETAIL - KITCHEN COVE SCALE: 3"=1'-0"
ID440_SP21
Sheet Title
DETAIL DRAWINGS Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
3"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID4.00
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
N
P-1 P-2
FINISH PLAN NOTES 1. WC-1 P-1 P-2 MR-1 CA-3
CA-4
-2 WC
MEETING ROOM 409
OFFICE B 408
P-2 -2 WC
2. 3.
WC-1 P-1 P-2
4. 5. 6.
CA-3
BOARD ROOM 410
7.
1 2"
WO 8 X 11" CARD SAMPLES OF ALL PAINT COLORS TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO APPLICATIONS.
DESIGNED BY DGS INTERIORS
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM
FINISH LEGEND
CA-4
P- 2
REFER TO REFLECTED CEILING PLAN FOR PAINT FINISHES FOR BULKHEADS AND DRYWALL CEILING ALL FLOORING TRANSITIONS ARE TO OCCUR AT THE CENTERLINE OF DOOR. ENSURE ALL FLOOR TRANSITIONS ARE LEVEL, FEATHER BACK SUBSTRATE TO ENSURE SMOOTH TRANSITION. ALL WALLS TO BE PAINTED P-1 UNLESS OTHERWISE NOTED. ALL BASEBOARDS TO BE PAINTED P-2 UNLESS OTHERWISE NOTED. ALL FLOORING TO BE C-1 UNLESS OTHERWISE NOTED.
OFFICE A 407
No.
HALLWAY WD-1
403.1
WD-1
XX
WALL FINISHES ARE NOTED ON ELEVATION AND SECTION DRAWINGS.
1
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
CA-1
X-X
FLOOR FINISHES
X-X
ROOM NAME AND ROOM NUMBER
P-5
CA-1
STAFF KITCHEN 404
-2 WC
T-1
ENTRANCE 401
RECEPTION 403 CA-2
CA-1
No.
WAITING AREA WC-1 P-4
402
MR-1
CA-5
P-3
WORKSTATIONS 406 Project:
LULULEMON OFFICE
P-3
SAMPLE LIBRARY 405
# 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8 PROJECT #
ID440_SP21
Sheet Title
FINISHES PLAN 1 ID0.02
FINISHES PLAN 1/4"=1'-0"
Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/4"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID5.00
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
FINISHES SCHEDULE CODE
CARPET
ITEM
CA-1 CARPET TILE
CA-2 CARPET TILE
CA-3 CARPET TILE
CA-4 CARPET TILE
CA-5
SUPPLIER: INTERFACE CONTACT: MICHELLE KENNEDY CONTACT #: (236)749-3690
COLLECTION: URBAN RETREAT STYLE: UR303 COLOUR: GRANITE SIZE: 50 X 50 CM INSTALLATION: TAC- TILES W/ CONNECTORS
SUPPLIER: INTERFACE CONTACT: MICHELLE KENNEDY CONTACT #: (236) 749-3690
LOCATION: ROOM 403 - RECEPTION AREA
COLLECTION: LOOK BOTH WAYS STYLE: 9406002 COLOUR: CORALITE SIZE: 50 X 50 CM INSTALLATION: TAC - TILES W/ CONNECTORS
SUPPLIER: INTERFACE CONTACT: MICHELLE KENNEDY CONTACT #: (236) 749-3690
LOCATION: ROOM 409 - MEETING ROOM ROOM 410 - BOARD ROOM
COLLECTION: EMPLOY LOOP STYLE: 4197007 COLOUR: NUTMEG SIZE: 50 X 50 CM INSTALLATION: TAC - TILES W/ CONNECTORS
SUPPLIER: INTERFACE CONTACT: MICHELLE KENNEDY CONTACT #: (236) 749-3690
LOCATION: ROOM 407 - OFFICE A ROOM 408 - OFFICE B
COLLECTION: EMPLOY LOOP STYLE: 4197011 COLOUR: CIRRUS SIZE: 50 X 50 CM INSTALLATION: TAC - TILES W/ CONNECTORS
SUPPLIER: INTERFACE CONTACT: MICHELLE KENNEDY CONTACT #: (236) 749-3690
TYPE: TEMPERED COLOUR: CLEAR THICKNESS: 10MM
GLASS TYPE: TEMPERED COLOUR: FROSTED MILK WHITE THICKNESS: 10MM
GL-2
RUBBER BASE
ITEM
RB-1 SOLID SURFACE
T-1
RF-1
SUPPLIER: KUNGXING GLASS LTD CONTACT: XIAO LIN CONTACT #: +86 (135) 009-2849
LOCATION: ROOM 407 - OFFICE A ROOM 408 - OFFICE B
SUPPLIER: KUNGXING GLASS LTD CONTACT: XIAO LIN CONTACT #: +86 (135) 009-2849
LOCATION: ROOM 407 - OFFICE A ROOM 408 - OFFICE B
WALL COVERING
TYPE: REFLECTIVE COLOUR: CLEAR THICKNESS: 5MM
MR-1
SUPPLIER: LUCK GLASS CONTACT: SHANE SMITH CONTACT #: +86 (130) 845-8255
LOCATION: ROOM 402 - WAITING AREA
GENERAL NOTES - LL PAINTED WALLS SHALL BE WASHABLE LATEX, EGGSHELL FINISH. - ALL PAINTED CEILINGS TO BE WASHABLE LATEX, FLAT FINISH. - ALL PAINTED TRIM TO BE: TBD-PREMIUM GRADE AS PER PAINTER'S CONTRACTOR'S ARCHITECTURAL SPECIFICATION MANUAL, LATEST EDITION. - WO 8 21" X 11" CARD SAMPLES OF ALL PAINT COLORS TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO APPLICATIONS. - REFER TO ARCHITECTURAL PROJECT MANUAL DIVISION 9- FINISHES- 09900 PAINT.
PAINT
P-1 PAINT
P-2 PAINT
P-3 PAINT
P-4 PAINT
STYLE: LATEX ACRYLIC COLOUR: SHOW STOPPER COLOUR NO.: SW 7588 FINISH/SHEEN: SATIN
STYLE: LATEX ACRYLIC COLOUR: ORIGAMI WHITE COLOUR NO.: SW 7636 FINISH/SHEEN: SATIN
STYLE: LATEX ACRYLIC COLOUR: ON THE ROCKS COLOUR NO.: SW 7671 FINISH/SHEEN: SATIN
STYLE: LATEX ACRYLIC COLOUR: AFRICAN GRAY COLOUR NO.: SW 9162 FINISH/SHEEN: SATIN
STYLE: LATEX ACRYLIC COLOUR: HIGH REFLECTIVE WHITE COLOUR NO.: SW 7757 FINISH/SHEEN: SATIN
SUPPLIER: SHERWIN-WILLIAMS CONTACT: AMANDA EVANS CONTACT #: (778)589-5285
SUPPLIER: SHERWIN-WILLIAMS CONTACT: AMANDA EVANS CONTACT #: (778)589-5285
LOCATION: ROOM 407 - OFFICE A ROOM 408 - OFFICE B ROOM 409 - MEETING ROOM ROOM 410 - BOARD ROOM
SUPPLIER: SHERWIN-WILLIAMS CONTACT: AMANDA EVANS CONTACT #: (778)589-5285
LOCATION: ROOM 403.1 HALLWAY ROOM 405 - SAMPLE LIBRARY ROOM 406 - WORKSTATIONS
SUPPLIER: SHERWIN-WILLIAMS CONTACT: AMANDA EVANS CONTACT #: (778)589-5285
SUPPLIER: SHERWIN-WILLIAMS CONTACT: AMANDA EVANS CONTACT #: (778)589-5285
LOCATION: ROOM 401- ENTRANCE ROOM 402 - WAITING AREA
LOCATION: ROOM 401- ENTRANCE
STYLE: ANGELA HARRIS SNOW COLOUR: WHITE SIZE: 11.81" X 35.43" FINISH: MATTE GROUT: WHITE
PRODUCT: SCRATCH STONE STYLE: I473106L COLOUR: GRAY SIZE: 8.7 IN W X 47.6 IN
LOCATION BASEBOARD ACROSS THE OFFICE
SUPPLIER: CORIAN SOLID SURFACE CONTACT: JOHN MARK CONTACT #: +1 (956) 124-7954
LOCATION: ROOM 406 - WORKSTATIONS
SUPPLIER: TILEBAR CONTACT: LEO SANDMAN CONTACT #: +1 (516) 541- 6260
LOCATION: ROOM 403 - RECEPTION AREA
DGS INTERIORS
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No.
SUPPLIER: THE HOME DEPOT CONTACT: ADAM LEVINE CONTACT #: +1 (865) 337-654
1
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
LOCATION: ROOM 404 - KITCHEN ROOM 405 - SAMPLE LIBRARY
GENERAL NOTES - 3 SAMPLES OF EACH WALLCOVERING TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO ORDERING / APPLICATION..
WALLCOVERING
TYPE: WOOD VENEER PRODUCT: WALNUT FLAT CUT STYLE: VENEER-WALNUT-FC RATINGS: ASTM E-84 CLASS A FINISH: SATIN / POLY TOP COAT 1 THICKNESS: 100 "
SUPPLIER:URBAN WALL COVERING CONTACT: ROBERT PARKS CONTACT #: +1 (995) 542 - 3685
LOCATION: ROOM 401- ENTRANCE ROOM 402 - WAITING AREA
WALLCOVERING
TYPE: WALLPAPER PRODUCT: ELTIS PARADISIO STYLE: RM 60501 COLOUR: METALLIC UNDERTONE RATINGS: ASTM- E-84 CLASS A COVERAGE: 13.75 SQ FT
SUPPLIER:URBAN WALL COVERING CONTACT: ROBERT PARKS CONTACT #: +1 (995) 542 - 3685
LOCATION: ROOM 407 - OFFICE A ROOM 408 - OFFICE B
GENERAL NOTES - ALL WOOD SURFACES TO RECEIVED CLEAR LACQUER, 20 DEGREE SHEEN, UNLESS SPECIFIED OTHERWISE. - 3 SAMPLES OF ALL WOOD SPECIES ON EACH WOOD TYPE TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO APPLICATION. - MILLWORK FABRICATOR TO ENSURE ALL WOOD SPECIES, VENEER CUTS, AND SOLID CUTS ARE CONSISTENT IN ALL AREAS. WOOD VENEER
WD-1 WOOD VENEER
WD-2
TYPE: AGGREGATE NEUTRAL COLOUR: BEECH NUWOOD FINISH: MATTE THICKNESS: 2CM
LVT
WC-2
LOCATION: ROOM 409 - MEETING ROOM ROOM 410 - BOARD ROOM
SUPPLIER: ARMSTRONG FLOORING CONTACT: LOUIS NEIL CONTACT #: +1(826) 7876
GENERAL NOTES - 3 SAMPLES OF EACH WOOD FLOORING TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO ODERING / APPLICATION..
WC-1
WOOD PANELS
TYPE: R48CR COLOUR: CARBON BEIGE FINISH: THERMOPLASTIC RUBBER THICKNESS: 0.125 IN
GENERAL NOTES - 3 SAMPLES OF EACH TILE TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO ORDERIGN / APPLICATION. - USE APPROPRAITE GROUTS: SANDED ON FLOOR, UNSANDED FOR WALL, UNSANDED FOR POLISHED STONE - NATURAL STONE FINISHES (SLATE, MARBLE, ETC.) TO BE FINISHED WITH WATER BASED PENTRATING SEALER. SEALER: 'SEALERS CHOICE' WATER BASE
PORCELAIN TILE
RESILIENT FLOORING
REMARKS
DESIGNED BY
SS-1
LOCATION: ROOM 406 - WORKSTATIONS
SUPPLIER / MANUFACTURER
GENERAL NOTES - 3 SAMPLES OF CURRENT STOCK OF ALL SLAB MATERIAL TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO ORDERING. - NATURAL STONE TO BE FINISHED WITH WATER BASED PENETRATING SEALER, STONE ENHANCER, MATTE FINISH. STONE SLAB
TILE
SPECIFICATION
GENERAL NOTES - 3 SAMPLES OF EACH RUBBER BASE TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW
RUBBER COVE BASE
GENERAL NOTES - 3 SAMPLES OF EACH MELAMINE TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO ORDERING / APPLICATION / MANUFACTURING / FABRICATION. MIRROR
P-5
LOCATION: ROOM 401- ENTRANCE ROOM 402 - WAITING AREA ROOM 403.1 HALLWAY
CODE
GENERAL NOTES - 3 SAMPLES OF EACH GLASS TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW
GL-1
PAINT
REMARKS
COLLECTION: URBAN RETREAT STYLE: UR303 COLOUR: 7132006 STONE SIZE: 50 X 50 CM INSTALLATION: TAC-TILES W/ CONNECTORS
GLASS
MIRROR
SUPPLIER / MANUFACTURER
GENERAL NOTES - MANUFACTURER TO PROVIDE DOCUMENTATION STATING THAT THE GOODS PROVIDED MEET ALL FLAME SPREAD AND SMOKE DEVELOPMENT CODES. - ALL SUBSTITUTES AND ALTERATIONS MUST BE SUBMITTED TO & REVIEWED BY INTERIOR DESIGNER PRIOR TO PURCHASE. - FOUR 18" X 18" SAMPLES OF EACH CARPET TO BE SUBMITTED TO INTERIOR DESIGNER FOR REVIEW PRIOR TO PURCHASE / FABRICATION / MANUFACTURING / APPLICATION. - MANUFACTURER TO SUPPLY GC WITH COMPLETE CARE AND MAINTENANCE INSTRUCTIONS FOR THE FINISHED PRODUCTS PRIOR TO PURCHASE. CARPET TILE
GLASS
SPECIFICATION
FINISHES SCHEDULE
PRODUCT: CLASSIK PANNEL SPECIES: WALNUT PRODUCT CODE: C5874 FINISH/SHEEN: 10% GLOSS SIZE: 53.5" X 13.5" THICKNESS: 6.5 MM
SUPPLIER: FINIUM CONTACT: MARGOT ROBIN CONTACT #: +1 (866)834 - 6486
PRODUCT: KONSEPT PANNEL SPECIES: WALNUT PRODUCT CODE: C5874 FINISH/SHEEN: 10% GLOSS SIZE: 41.69" X 16.5" THICKNESS: 7 MM
SUPPLIER: FINIUM CONTACT: MARGOT ROBIN CONTACT #: +1 (866)834 - 6486
LOCATION: ROOM 403.1 HALLWAY
LOCATION: ROOM 406 - WORKSTATIONS
No.
Project:
LULULEMON OFFICE # 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8 PROJECT #
ID440_SP21
Sheet Title
SCHEDULES Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/4"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID5.00
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
N FURNITURE GENERAL NOTES 1. F5
F5
F11 F5
F08 F09 F4
F6 F6
F6
F6
BOARD ROOM 410 F10 F6
F6
F6 MOUNT AT 42" AFF
MEETING ROOM 409
OFFICE B 408
F08
F5
F6
F4
F09
OFFICE A 407 MOUNT AT 42" AFF
STAFF KITCHEN 404 F7
IN ILT BU TER N A L P
F3
F12
IN ILT BU TER N A L P
MOUNT AT 42" AFF
F12
F3
F7
WORKSTATIONS 406
F3
F3 F7
SAMPLE LIBRARY 405
IN ILT BU NTER PLA
F12 IN ILT BU NTER PLA
ENTRANCE 401
WAITING AREA
F2
402
RECEPTION 403
PROVIDE ALL LABOR, MATERIALS AND TRANSPORTATION NECESSARY FOR THE COMPLETE INSTALLATION OF ALL FURNITURE, FURNISHINGS AND EQUIPMENT (FF&E) SPECIFIED. 2. SAMPLES: SUBMIT ACTUAL SAMPLES OF ALL FABRICS AND FINISH SAMPLES FOR COLOR VERIFICATIONS OR SELECTION. 3. MAINTENANCE INSTRUCTIONS: SUBMIT THREE (3) COPIES OF MANUFACTURER'S RECOMMENDED MAINTENANCE INSTRUCTIONS, INCLUDING INFORMATION NEEDED FOR REMOVAL OF COMMON STAINS 4. PROTECT FURNITURE AND ACCESSORIES DURING DELIVERY, STORAGE AND HANDLING TO PREVENT DAMAGE, SOILING AND DETERIORATION 5. SHIPMENT OF FF&E MAY BE MADE DIRECTLY TO BUILDING SITE IN CASES WHERE PRIOR APPROVAL OF ARCHITECT HAS BEEN OBTAINED AND THE BUILDING IS READY FOR FF&E INSTALLATION. FF&E CONTRACTORS ARE RESPONSIBLE FOR KNOWING WHEN THEIR MERCHANDISE IS TO ARRIVE AND MUST HAVE AVAILABLE ALL LABOR AND EQUIPMENT NEEDED FOR DELIVERY, UNLOADING, ASSEMBLY, HANDLING, SETTING INTO PLACE, AND INSPECTION. STAGING AREAS MUST BE LOCKABLE. 6. DELIVERY SCHEDULE MUST BE APPROVED BY THE OWNER. 7. CONTRACTOR IS RESPONSIBLE FOR TEMPORARY STORAGE OF ALL FURNITURE AND ACCESSORY ITEMS UNTIL TIME OF DELIVERY AND INSTALLATION. 8. PARTICULAR CARE MUST BE TAKEN BY FF&E CONTRACTORS WHEN HANDLING MERCHANDISE DURING INSTALLATION TO PREVENT DAMAGE TO EXISTING BUILDING, WALLS, CARPET, SHELVING AND MILLWORK. 9. FF&E CONTRACTORS ARE RESPONSIBLE FOR ALL DAMAGE TO ITEMS PROVIDED UNDER THIS CONTRACT UP TO THE TIME OF ACCEPTANCE BY THE OWNER, WHETHER THIS DAMAGE RESULTS DURING SHIPMENT FROM MANUFACTURER, DELIVERY TO SITE, PLACEMENT, OR THROUGH CARELESSNESS OR MALICIOUS MISCHIEF OR WHATEVER REASON, AND FINAL PAYMENT WILL BE MADE ONLY FOR UNDAMAGED ITEMS. CONTRACTOR SHALL REPLACE ALL DAMAGED ITEMS OR PARTS OF ASSEMBLED OR MANUFACTURED ITEMS AS SOON AS DISCOVERED AT NO COST TO THE OWNER. 10. NOMINAL TOUCH-UP OR REPAIR OF PAINTED FINISHES WILL BE PERMITTED IF DONE IN ACCORDANCE WITH MANUFACTURER'S RECOMMENDED PROCEDURES FOR SUCH REPAIRS. THE RESULTANT REPAIRS SHALL APPEAR TO BE AS LIKE NEW CONDITION AS AGREED TO AND SIGNED OFF BY THE ARCHITECT IN ACCEPTANCE OF THE PROJECT. REPAIRS MUST RETURN ITEMS TO THEIR ORIGINAL APPEARANCE AND FUNCTION, THEY MUST APPEAR AS GOOD AS NEW.
DESIGNED BY DGS INTERIORS
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No. 1
No.
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
F1 F2
F2
F1
LIGHTING LEGEND DUPLEX ELECTRICAL OUTLET
F12
F7
DUPLEX ELECTRICAL OUTLET WITH USB PORT
Project:
LULULEMON OFFICE # 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
MOUNT AT 12" AFF OTHERWISE SPECIFIED
PROJECT #
ID440_SP21
Sheet Title
FURNITURE AND ELECTRICAL PLAN 1 ID0.02
FURNITURE AND ELECTRICAL PLAN 1/4"=1'-0"
Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/4"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID6.00
LEGAL NOTE: ANY REPRODUCTION OR DISTRIBUTION FOR ANY PURPOSE OTHER THAN AUTHORIZED BY ( ) IS FORBIDDEN. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND ( ) SHALL BE INFORMED OF ANY DISCREPANCIES TO THE DIMENSIONS AND CONDITIONS SHOWN IN THE DRAWINGS. SHOP DRAWINGS SHALL BE SUBMITTED TO ( ) FOR REVIEW AND APPROVAL PRIOR TO FABRICATION. DO NOT SCALE DRAWINGS
DOOR SCHEDULE DOOR DOOR # ROOM #
FRAME
HARDWARE
ROOM NAME
REMARKS TYPE
W x H x THICKNESS
MATERIAL
FINISH
FIRE RATING
TYPE
MATERIAL
FINISH
HINGE
LATCH
STOP
CLOSER
D1
401
RECEPTION
EX
-
-
-
-
-
-
-
-
-
-
-
-
D2
401
BOARD ROOM
1
3' X 6'8" X 2"
G
-
-
1
M
ST
H3
H2
H5
-
FROSTED AND CLEAR GLASS REFER TO ELEVATION
DESIGNED BY DGS INTERIORS
D3
402
OFFICES
2
WD/G
3' X 7'2" X 2"
P3/P4
-
M
2
ST
H4
-
-
WALNUT WOOD VENEER DOOR WITH CLEAR GLASS REFER TO ELEVATION -
-
165 PEMBERTON AVE NORTH VANCOUVER, BC V7P 2R4 Phone : 604.857.6265 Email : INFO@DGS-INTERIORS.COM No. 1
Issue Description
Date
ISSUED FOR TENDER
YYYY.MM.DD
Revisions
Date
HARDWARE SCHEDULE H1 STANDARD HINGES
TBD
TBD
H2 DOOR PULL
TBD
H3 LOCK SET
H4
TBD
PIVOT HINGE SET
H5 FLOOR STOP
MANUFACTURER: HOME DEPOT
MANUFACTURER: KEELER
MANUFACTURER: SCHLAGE
MANUFACTURER: RIXSON
MANUFACTURER:
CODE: 859-761
CODE: AAKC1075
CODE: XSJ11190
CODE: RX548-965
CODE:
FINISH: SATIN NICKEL
FINISH: BRASS AND BLACK WOOD
FINISH: BLACK MATTE
FINISH: BRUSHED NICKEL
FINISH:
TBD
No.
Project:
ABBREVIATIONS METAL
2"
6'
LULULEMON OFFICE
2"
M
3' 6"
# 408 - 355 BURRARD ST VANCOUVER, B.C. V6C 2G8
2'-0"
TEMPERED GLASS
ID440_SP21
Sheet Title
3'-6"
ST STAIN
PROJECT #
7' - 2"
3'-8"
5'-8"
CLR CLEAR
6' - 8"
G
2" 1'-6"
2"
P
PAINT
TYPE A
1 ID7.00
DOOR TYPE 1 1/4"=1'-0"
TYPE 1 STEEL FRAME
TYPE B
2 ID7.00
DOOR TYPE 2 1/4"=1'-0"
3 ID7.00
FRAME TYPE 1 1/4"=1'-0"
TYPE 2 STEEL FRAME
4 ID7.00
FRAME TYPE 1 1/4"=1'-0"
DOOR/HARDWARE SCHEDULE Date:
04/05/21
Drawn By:
D.G.
Checked By:
SS
Scale:
1/4"=1'-0"
Drawing Issue
FOR PERMIT Drawing Sheet No.
ID6.00