PANNEAUXSOLAI RE
KD Modules / F Series
Kyocera KD Modules Kyocera KD Modules utilize a larger, more powerful, high efficiency 156mm x 156mm solar cell and produce higher output per module.
locking plug-in connectors heav y dut y anodized aluminum frame l arger, more powerful 156mm sol ar cells
Kyocera Empowers Your Futured.Blue Modules Kyocera began research and development of solar energy back in 1975. Since then, we have been leading the solar industry with the development of the most efficient and cost effective systems available. With over 35 years of experience in solar, Kyocera is a natural industry leader. Our modules are ideal for a wide range of applications from off-grid industrial to on-grid commercial and residential, providing superior field performance among the competition. Kyocera stands behind its products and has a proven reputation within the solar industry for quality and reliability.
KD modules / F SERIES SPECIFICATIONS
KD240GX-LFB
KD235GX-LFB
KD230GX-LFB
KD215GX-LFBS
KD210GX-LFBS
KD205GX-LFBS
KD185GX-LFBS
KD135GX-LFBS
Maximum Power
240W
235W
230W
215W
210W
205W
185W
135W
Number of Cells
60
60
60
54
54
54
48
36
+5%/-3%
+5%/-3%
+5%/-3%
+5%/-3%
+5%/-3%
+5%/-3%
+5%/-5%
+5%/-5%
Maximum System Voltage
600V
600V
600V
600V
600V
600V
600V
600V
Maximum Power Voltage
29.8V
29.8V
29.8V
26.6V
26.6V
26.6V
23.6V
17.7V
Maximum Power Current
8.06A
7.89A
7.72A
8.09A
7.90A
7.71A
7.84A
7.63A
Open Circuit Voltage
36.9V
36.9V
36.9V
33.2V
33.2V
33.2V
29.5V
22.1V
Short Circuit Current
8.59A
8.55A
8.36A
8.78A
8.58A
8.36A
8.58A
8.37A
Series Fuse Rating
15A
15A
15A
15A
15A
15A
15A
15A
Length
65.4”
65.4”
65.4”
59.1”
59.1”
59.1”
52.7”
59.1”
Width
39.0”
39.0”
39.0”
39.0”
39.0”
39.0”
39.0”
26.3”
Depth
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
Weight
46.3 lbs
46.3 lbs
46.3 lbs
39.7 lbs
39.7 lbs
39.7 lbs
35.3 lbs
27.5 lbs
Locking Plug-in Connectors
Locking Plug-in Connectors
Locking Plug-in Connectors
Locking Plug-in Connectors
Locking Plug-in Connectors
Locking Plug-in Connectors
Locking Plug-in Connectors
Locking Plug-in Connectors
Tolerance
Termination Method
Warranty - Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA. - Extended warranties available per project requirements. - Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA. - Refer to Kyocera warranty policy for details. NEC 2008 Compliant UL 1703 Listed, Class C IEC 61215 Kyocera reserves the right to modify these specifications without notice. All specification at 25°C. cell temperature, 1.5 AM and 1000W/m2. © 2010 Kyocera Solar, Inc. All rights reser ved.
KYOCERA SOLAR, INC. 800-223-9580 toll-free 800-523-2329 fax www.kyocerasolar.com
UL Listing QIGU.E173074 090210
KD 100 F Series HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 135GX-LFBS KD 185GX-LFBS
Cutting Edge Technology
New Process Improvements
As a pioneer with 35 years in solar, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
•
•
Quality Built In • • • • •
UV stabilized, aesthetically pleasing black anodized frame Supported by major mounting structure manufacturers Easily accessible grounding points on all four corners for fast installation Proven junction box technology with PV wire to work with transformerless inverters Quality locking plug-in connectors to provide safe & quick connections
Reliable • • •
NEC 2008 Compliant UL 1703, ISO 9001 and ISO 14001 Certified and Registered Class C
Superior built-in quality Proven superior field performance Tight power tolerance
Warranty •
UL Listing QIGU.E173074
All solar cells are fabricated with a new proprietary etching and coating process which translates into a ‘smoother’ appearance while maintaining the same gridline and bus-bar design. All modules have added crossbars on the back side of the module for greater support and stability in harsh conditions, including high wind and snow load regions.
• • •
Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA Extended warranties available per project requirements Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA Refer to Kyocera warranty policy for details
KD 100 F Series
MECHANICAL SPECIFICATIONS
electrical SPECIFICATIONS Standard Test Conditions
KD135GX-LFBS
Vmp
17.7
23.6
V
Imp
7.63
7.84
A
22.1
29.5
V
Isc
8.37
8.58
A
+5/-5
+5/-5
%
Ptolerance
Junction Box
Cable w/ connector
(-)
label
(+) stabilizer Bar
18.56in 471.5mm
Voc
4.25in 108mm
1.77in 45mm
33in/838.2mm
W
4.13in 105mm
185
10.96in 278.5mm
135
18.56in 471.5mm
Pmp2
59in 1500mm
KD185GX-LFBS
33in/838.2mm
KD135GX-LFBS
Nominal Operating Cell Temperature Conditions (NOCT) O
45.0
45.0
C
Pmax
97
133
Vmp
16
21.3
V
Imp
6.1
6.27
A
Voc
20.2
27
V
Isc
6.78
6.95
A
10.96in 278.5mm
TNOCT
W 25.31(±0.1)in 643±2.5mm
.49in 12.5mm
Weight: 27.49lbs (12.47kg)
KD185GX-LFBS 4.25in 108mm
-0.616
-0.849
W/ C
Voc
-0.08
-0.106
V/ C
Isc
0.00502
0.00515
A/ C
Operating Temp
-40~90
-40~90
o
34.3in/871.22mm
16.24in 412.5mm
Pmax
Junction Box
label
stabilizer Bar
52.68in 1338mm
o
Cable w/ connector
26.4in/670.56mm
Temperature Coefficients
4.13in 105mm
10.1in 256.5mm
1.77in 45mm
O
C
15 A
Maximum DC System Voltage (UL)
600 V
10.1in 256.5mm
System Design Series Fuse Rating
16.24in 412.5mm
o
37.99(±0.1)in 965±2.5mm
.49in 12.5mm
Weight: 35.3lbs (16.01kg)
NEC 2008 Compliant UL 1703 Listed
Legend Mounting Holes
drainage Holes
grounding Holes
Kyocera reserves the right to modify these specifications without notice. All specification at 25°C. cell temperature, 1.5 AM and 1000W/m2. Authorized distributor
KYOCERA SOLAR, INC. 100110
800-223-9580 toll-free
800-523-2329 fax
www.kyocerasolar.com
KD 200-54 F Series HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 200-54 Series
Cutting Edge Technology
New Process Improvements
As a pioneer with 35 years in solar, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
•
•
Quality Built In • • • • •
UV stabilized, aesthetically pleasing black anodized frame Supported by major mounting structure manufacturers Easily accessible grounding points on all four corners for fast installation Proven junction box technology with PV wire to work with transformerless inverters Quality locking plug-in connectors to provide safe & quick connections UL Listing QIGU.E173074 NEC 2008 Compliant UL 1703, ISO 9001 and ISO 14001 Certified and Registered Class C Also available: QUALIFIED FOR “BUY AMERICAN” Manufactured in San Diego, California
All solar cells are fabricated with a new proprietary etching and coating process which translates into a ‘smoother’ appearance while maintaining the same gridline and bus-bar design. All modules have added crossbars on the back side of the module for greater support and stability in harsh conditions, including high wind and snow load regions.
Reliable • • •
Superior built-in quality Proven superior field performance Tight power tolerance
Warranty
Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA • Extended warranties available per project requirements • Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA • Refer to Kyocera warranty policy for details
KD 200-54 Series
MECHANICAL SPECIFICATIONS
electrical SPECIFICATIONS Standard Test Conditions
W
Vmp
26.6
26.6
26.6
V
Imp
7.71
7.90
8.09
A
Voc
33.2
33.2
33.2
V
Isc
8.36
8.58
8.78
A
+5/-0
+5/-0
+5/-0
%
Ptolerance
Junction Box
Cable w/ connector
37.4in/950mm
215
4.13in 105mm
210
18.56in 471.5mm
205
label
STABILIZER BAR
59.06in 1500mm
Pmp2
18.56in 471.5mm
KD215GX-LFBS
29.5in/750mm
KD210GX-LFBS
10.96in 278.5mm
4.25in 108mm
KD205GX-LFBS
Nominal Operating Cell Temperature Conditions (NOCT) O
45.0
45.0
45.0
C
Pmax
147
151
155
W
Vmp
24.0
24.0
24.0
V
Imp
6.17
6.32
6.47
A
Voc
30.4
30.4
30.4
V
Isc
6.77
6.95
7.11
A
10.96in 278.5mm
TNOCT
37.99(±0.1)in 965±2.5mm
.49in 12.5mm
Weight: 41lbs (18.6kg)
1.8in 46mm
Temperature Coefficients o
Pmax
-0.938
-0.964
-0.991
W/ C
Voc
-0.120
-0.120
-0.120
V/ C
Isc
0.00502
0.00515
0.00527
A/ C
Operating Temp
-40~90
-40~90
-40~90
o
o
O
C
System Design Series Fuse Rating
15 A
Maximum DC System Voltage (UL)
600 V Legend
NEC 2008 Compliant UL 1703 Listed
Mounting Holes
drainage Holes
grounding Holes
Kyocera reserves the right to modify these specifications without notice. All specification at 25°C. cell temperature, 1.5 AM and 1000W/m2. Authorized distributor
KYOCERA SOLAR, INC. 100110
800-223-9580 toll-free
800-523-2329 fax
www.kyocerasolar.com
KD 200-60 F Series HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 200-60 Series
Cutting Edge Technology As a pioneer with 35
years in solar, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
• •
•
•
Quality Built In • • •
New Process Improvements
UV stabilized, aesthetically pleasing black anodized frame Supported by major mounting structure manufacturers Easily accessible grounding points on all four corners for fast installation Proven junction box technology with PV wire to work with transformerless inverters Quality locking plug-in connectors to provide safe & quick connections
All solar cells are fabricated with a new proprietary etching and coating process which translates into a ‘smoother’ appearance while maintaining the same gridline and bus-bar design. All modules have added crossbars on the back side of the module for greater support and stability in harsh conditions, including high wind and snow load regions.
Reliable • • •
Superior built-in quality Proven superior field performance Tight power tolerance
Warranty UL Listing QIGU.E173074 NEC 2008 Compliant UL 1703, ISO 9001 and ISO 14001 Certified and Registered Class C Also available: QUALIFIED FOR “BUY AMERICAN” Manufactured in San Diego, California
• • • •
Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA Extended warranties available per project requirements Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA Refer to Kyocera warranty policy for details
KD 200-60 F Series
MECHANICAL SPECIFICATIONS
electrical SPECIFICATIONS Standard Test Conditions
235
240
W
Vmp
29.8
29.8
29.8
V
Imp
7.72
7.89
8.06
A
Voc
36.9
36.9
36.9
V
Isc
8.36
8.55
8.59
A
+5/-3
+5/-3
+5/-3
%
label stabilizer Bar
21.65in 550mm
Ptolerance
Cable w/ connector
Junction Box 40.55in/1030mm
230
11.06in 281mm
Pmp2
21.65in 550mm
KD240GX-LFB
65.43in 1662mm
KD235GX-LFB
32.68in/830mm
KD230GX-LFB
4.13in 105mm
4.25in 108mm
Nominal Operating Cell Temperature Conditions (NOCT)
stabilizer Bar
O
45.0
45.0
45.0
C
Pmax
165
169
172
W
Vmp
26.8
26.8
26.7
V
11.06in 281mm
TNOCT
37.99(±0.1)in 965±2.5mm
Imp
6.18
6.31
6.45
A
Voc
33.7
33.7
33.7
V
Isc
6.77
6.92
6.95
A
.49in 12.5mm
Weight: 46.3lbs (21.0kg) 1.8in 46mm
Temperature Coefficients o
Pmax
-1.04
-1.07
-1.10
W/ C
Voc
-0.133
-0.133
-0.133
V/ C
Isc
0.00502
0.00513
0.00515
A/ C
Operating Temp
-40~90
-40~90
-40~90
o
o
O
C
System Design Series Fuse Rating
15 A
Maximum DC System Voltage (UL)
600 V
NEC 2008 Compliant UL 1703 Listed
Legend Mounting Holes
drainage Holes
grounding Holes
Kyocera reserves the right to modify these specifications without notice. All specification at 25°C. cell temperature, 1.5 AM and 1000W/m2. Authorized distributor
KYOCERA SOLAR, INC. 111810
800-223-9580 toll-free
800-523-2329 fax
www.kyocerasolar.com
KD Modules | P Series
KD P Series Family
Kyocera KD Modules Kyocera multicrystal photovoltaic KD Modules utilize a larger, more powerful, high efficiency 156mm x 156mm solar cell and produce higher output per module.
Warranty • Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA • Extended warranties available per project requirements
• Quality locking MC4 plug-in connectors to provide safe and quick connections
• Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA
• UV stabilized, heavy duty, and aesthetically pleasing black anodized aluminum frame
• Refer to Kyocera warranty policy for details
• Easily accessible grounding points on all four corners for fast installation
Kyocera Empowers Your Future
• Proven junction box technology with 12 AWG PV wire to work with transformerless inverters
Reliable • Proven superior field performance • Tight power tolerance • Only module to pass rigorous long-term testing performed by TÜV Rheinland
Kyocera began research and development of solar energy back in 1975. Since then, we have been leading the solar industry with the development of the most efficient and cost effective systems available. With over 35 years of experience in solar, Kyocera is a natural industry leader. Our modules are ideal for a wide range of applications from utility-scale to on-grid commercial and residential, providing superior field performance among the competition. Kyocera stands behind its products and has a proven reputation within the solar industry for quality and reliability.
KD Modules | P Series
P SERIES SPECIFICATIONS
Standard Test Conditions (STC)
STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*
KD315GX-LPB KD245GX-LPB KD240GX-LPB KD235GX-LPB KD230GX-LPB KD215GX-LPU KD210GX-LPU KD205GX-LPU KD185GX-LPU KD135GX-LPU (Preliminary)
Maximum Power
315
245W
240W
235W
230W
215W
210W
205W
185W
135W
Number of Cells
80
60
60
60
60
54
54
54
48
36
Tolerance
+5% / -3%
+5% / -3%
+5% / -3%
+5% / -3%
+5% / -3%
+5% / -0%
+5% / -0%
+5% / -0%
+5% / -5%
+5% / -5%
Maximum System Voltage
600V
600V
600V
600V
600V
600V
600V
600V
600V
600V
Maximum Power Voltage
39.8V
29.8V
29.8V
29.8V
29.8V
26.6V
26.6V
26.6V
23.6V
17.7V
Maximum Power Current
7.92A
8.23A
8.06A
7.89A
7.72A
8.09A
7.90A
7.71A
7.84A
7.63A
Open Circuit Voltage
49.2V
36.9V
36.9V
36.9V
36.9V
33.2V
33.2V
33.2V
29.5V
22.1V
Short Circuit Current
8.50A
8.91A
8.59A
8.55A
8.36A
8.78A
8.58A
8.36A
8.58A
8.37A
15A
15A
15A
15A
15A
15A
15A
15A
15A
15A
Length
65.4”
65.4”
65.4”
65.4”
65.4”
59.1”
59.1”
59.1”
52.7”
59.1”
Width
52.0”
39.0”
39.0”
39.0”
39.0”
39.0”
39.0”
39.0”
39.0”
26.3”
Depth
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
1.8”
Weight
60.6 lbs
46.3 lbs
46.3 lbs
46.3 lbs
46.3 lbs
39.7 lbs
39.7 lbs
39.7 lbs
35.3 lbs
27.6 lbs
Series Fuse Rating
Termination Method
Locking Plug-in Connectors
* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.
NEC 2008 Compliant UL 1703 Listed Certified IEC61215 Ed2 IEC61730 by JET
WARNING: Read the instruction manual in its entirety prior to handling, installing & operating Kyocera Solar modules.
091311
KYOCERA Solar, Inc.
• Available Upon Request • Authorized distributor
800-223-9580 800-523-2329 fax
www.kyocerasolar.com
HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 135 P Series Cutting Edge Technology As a pioneer with over 35 years in the solar energy industry, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
Quality Built In • UV stabilized, aesthetically pleasing black anodized frame • Supported by major mounting structure manufacturers • Easily accessible grounding points on all four corners for fast installation • Proven junction box technology with 12 AWG PV wire to work with transformerless inverters • Quality locking MC4 plug-in connectors to provide safe and quick connections
Reliable • Proven superior field performance • Tight power tolerance • Only module manufacturer to pass rigorous long-term testing performed by TÜV Rheinland
Warranty • Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA • Extended warranties available per project requirements • Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA • Refer to Kyocera warranty policy for details
Qualifications and Certifications UL Listing QIGU.E173074 NEC 2008 Compliant, UL 1703, ISO 9001, and ISO 14001 UL1703 Certified and Registered, UL Fire Safety Class C, CEC, FSEC Certified IEC61215 Ed 2 IEC61730 by JET
• Available Upon Request •
KD 135 P Series
Electrical SPECIFICATIONS
Module Characteristics
Standard Test Conditions (STC)
STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*
KD135GX-LPU
Dimensions: length/width/height
59.06in/26.30in/1.8in (1500mm/668mm/46mm)
Weight:
27.6lbs (12.5kg)
Pmp
135
W
Vmp
17.7
V
Imp
7.63
A
Modules per pallet:
20
Voc
22.1
V
Pallets per 53’ container:
36
Isc
8.37
A
Pallet box dimensions: length/width/height
63.19in/27.56in/49.02in (1605mm/700mm/1245mm)
Ptolerance
+5/-5
%
Pallet box weight:
632.8lbs (287kg)
PACKAGING SPECIFICATIONS
KD 135
Nominal Operating Cell Temperature Conditions (NOCT)
4.25in 108mm
NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*
Vmp
16
V
Imp
6.1
A
Voc
20.2
V
Isc
6.78
A
PTC
122.2
W
Pmax
-0.45
%/oC
Vmp
-0.52
%/oC
Imp
0.0066
%/ C
Voc
-0.36
%/oC
Isc
0.060
%/oC
(IP65) 39.8in 1010mm
W
4.13in 105mm
97
33.1in 840mm
Pmax
10.96in 278.5mm
C
18.56in 471.5mm
o
59.06in 1500mm
45
18.56in 471.5mm
TNOCT
1.8in 46mm
.49in 12.5mm
26.30in 668mm
o
.47in 12mm
-40 to +90
1.8in 46mm
Operating Temp
10.96in 278.5mm
Temperature Coefficients
C
o
15 A
Series Fuse Rating
.41in 10.3mm
600 V
Maximum DC System Voltage (UL)
Long Side
1in (25mm) @ 51mph (23m/s)
Hailstone Impact
Short Side
1.8in 46mm
System Design
10.96in 278.5mm
1.18in 30mm
Expanded View of Grounding Holes
.79in 20mm
Frame Cross Section Diagrams
* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.
NEC 2008 Compliant UL 1703 Listed Certified IEC61215 Ed2 IEC61730 by JET
WARNING: Read the instruction manual in its entirety prior to handling, installing & operating Kyocera Solar modules.
081211
KYOCERA Solar, Inc.
MOUNTING HOLES .35in (9mm)
DRAINAGE HOLES
Our Valued Partner
800-223-9580 800-523-2329 fax
www.kyocerasolar.com
GROUND SYMBOL .35in (9mm)
HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 185 P Series Cutting Edge Technology As a pioneer with over 35 years in the solar energy industry, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
Quality Built In • UV stabilized, aesthetically pleasing black anodized frame • Supported by major mounting structure manufacturers • Easily accessible grounding points on all four corners for fast installation • Proven junction box technology with 12 AWG PV wire to work with transformerless inverters • Quality locking MC4 plug-in connectors to provide safe and quick connections
Reliable • Proven superior field performance • Tight power tolerance • Only module manufacturer to pass rigorous long-term testing performed by TÜV Rheinland
Warranty • Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA • Extended warranties available per project requirements • Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA • Refer to Kyocera warranty policy for details
Qualifications and Certifications UL Listing QIGU.E173074 NEC 2008 Compliant, UL 1703, ISO 9001, and ISO 14001 UL1703 Certified and Registered, UL Fire Safety Class C, CEC, FSEC Certified IEC61215 Ed 2 IEC61730 by JET
• Available Upon Request •
KD 185 P Series
Electrical SPECIFICATIONS
Module Characteristics
Standard Test Conditions (STC)
STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*
KD185GX-LPU
Dimensions: length/width/height
52.68in/38.98in/1.8in (1338mm/990mm/46mm)
Weight:
35.3lbs (16.0kg)
Pmp
185
W
Vmp
23.6
V
Imp
7.84
A
Modules per pallet:
20
Voc
29.5
V
Pallets per 53’ container:
36
Isc
8.58
A
Pallet box dimensions: length/width/height
56.69in/42.52in/49.02in (1440mm/1080mm/1245mm)
Ptolerance
+5/-5
%
Pallet box weight:
798.2lbs (362kg)
PACKAGING SPECIFICATIONS
KD 185
Nominal Operating Cell Temperature Conditions (NOCT)
4.25in 108mm
NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*
Pmax
133
W
Vmp
21.3
V
Imp
6.27
A
Voc
27.0
V
Isc
6.95
A
PTC
167.1
W
Pmax
-0.45
%/oC
Vmp
-0.52
%/oC
Imp
0.0066
%/oC
Voc
-0.36
%/ C
Isc
0.060
%/oC
10.10in 256.5mm
33.1in 840mm 16.24in 412.5mm 52.68in 1338mm 10.10in 256.5mm
Temperature Coefficients
.49in 12.5mm
38.98in 990mm
.47in 12mm
-40 to +90
C
o
1.18in 30mm
Short Side
.41in 10.3mm
1.8in 46mm
System Design
1.8in 46mm
o
10.10in 256.5mm
Operating Temp
(IP65) 40.6in 1030mm
C
o
4.13in 105mm
45
16.24in 412.5mm
TNOCT
1.8in 46mm
15 A
Series Fuse Rating
Long Side
600 V
Maximum DC System Voltage (UL)
Expanded View of Grounding Holes
.79in 20mm
Frame Cross Section Diagrams
1in (25mm) @ 51mph (23m/s)
Hailstone Impact
* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.
NEC 2008 Compliant UL 1703 Listed Certified IEC61215 Ed2 IEC61730 by JET
WARNING: Read the instruction manual in its entirety prior to handling, installing & operating Kyocera Solar modules.
081211
KYOCERA Solar, Inc.
MOUNTING HOLES .35in (9mm)
DRAINAGE HOLES
Our Valued Partner
800-223-9580 800-523-2329 fax
www.kyocerasolar.com
GROUND SYMBOL .35in (9mm)
HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 200-54 P Series KD205GX-LPU
KD210GX-LPU
KD215GX-LPU
Cutting Edge Technology As a pioneer with over 35 years in the solar energy industry, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
Quality Built In • UV stabilized, aesthetically pleasing black anodized frame • Supported by major mounting structure manufacturers • Easily accessible grounding points on all four corners for fast installation • Proven junction box technology with 12 AWG PV wire to work with transformerless inverters • Quality locking MC4 plug-in connectors to provide safe and quick connections
Reliable • Proven superior field performance • Tight power tolerance • Only module manufacturer to pass rigorous long-term testing performed by TÜV Rheinland
Warranty • Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA • Extended warranties available per project requirements • Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA • Refer to Kyocera warranty policy for details
Qualifications and Certifications UL Listing QIGU.E173074 NEC 2008 Compliant, UL 1703, ISO 9001, and ISO 14001 UL1703 Certified and Registered, UL Fire Safety Class C, CEC, FSEC Certified IEC61215 Ed 2 IEC61730 by JET
• Available Upon Request •
KD 200-54 P Series
Electrical SPECIFICATIONS
Module Characteristics
Standard Test Conditions (STC)
STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*
Dimensions: length/width/height
59.06in/38.98in/1.8in (1500mm/990mm/46mm)
Weight:
39.7lbs (18.0kg)
KD205GX-LPU
KD210GX-LPU
KD215GX-LPU
Pmp
205
210
215
W
Vmp
26.6
26.6
26.6
V
Imp
7.71
7.90
8.09
A
Modules per pallet:
20
Voc
33.2
33.2
33.2
V
Pallets per 53’ container:
38
Isc
8.36
8.58
8.78
A
Pallet box dimensions: length/width/height
64in/44in/47in (1626mm/1118mm/1194mm)
Ptolerance
+5/-0
+5/-0
+5/-0
%
Pallet box weight:
950lbs (430.0kg)
PACKAGING SPECIFICATIONS
KD 200-54
Nominal Operating Cell Temperature Conditions (NOCT)
4.25in 108mm
45
45
45
Pmax
147
151
155
W
Vmp
24.0
24.0
24.0
V
Imp
6.17
6.32
6.47
A
Voc
30.4
30.4
30.4
V
Isc
6.77
6.95
7.11
A
PTC
185.2
189.8
194.4
W
18.56in 471.5mm
C
4.13in 105mm
10.96in 278.5mm
o
1.8in 46mm
59.06in 1500mm
18.56in 471.5mm
29.5in 750mm
(IP65) 37.4in 950mm
TNOCT
10.96in 278.5mm
NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*
Temperature Coefficients Pmax
-0.46
-0.46
-0.46
%/oC
Vmp
-0.52
-0.52
-0.52
%/oC
Imp
0.0065
0.0065
0.0065
%/ C
Voc
-0.36
-0.36
-0.36
%/oC
Isc
0.060
0.060
0.060
%/oC
-40 to +90
-40 to +90
-40 to +90
.47in 12mm
1.8in 46mm
Operating Temp
.49in 12.5mm
38.98in 990mm
o
C
o
15 A
Series Fuse Rating
.41in 10.3mm
600 V
Maximum DC System Voltage (UL)
Long Side
1in (25mm) @ 51mph (23m/s)
Hailstone Impact
Short Side
1.8in 46mm
System Design
10.96in 278.5mm
1.18in 30mm
Expanded View of Grounding Holes
.79in 20mm
Frame Cross Section Diagrams
* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.
NEC 2008 Compliant UL 1703 Listed Certified IEC61215 Ed2 IEC61730 by JET
WARNING: Read the instruction manual in its entirety prior to handling, installing & operating Kyocera Solar modules.
081211
KYOCERA Solar, Inc.
MOUNTING HOLES .35in (9mm)
DRAINAGE HOLES
GROUND SYMBOL .35in (9mm)
Our Valued Partner
800-223-9580 800-523-2329 fax
www.kyocerasolar.com
HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 200-60 P Series
KD235GX-LPB
KD240GX-LPB
KD245GX-LPB
KD250GX-LPB
Cutting Edge Technology As a pioneer with over 35 years in the solar energy industry, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
Quality Built In • UV stabilized, aesthetically pleasing black anodized frame • Supported by major mounting structure manufacturers • Easily accessible grounding points on all four corners for fast installation • Proven junction box technology with 12 AWG PV wire to work with transformerless inverters • Quality locking MC4 plug-in connectors to provide safe and quick connections
Reliable • Proven superior field performance • Tight power tolerance • Only module manufacturer to pass rigorous long-term testing performed by TÜV Rheinland
Warranty • Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA • Extended warranties available per project requirements • Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA • Refer to Kyocera warranty policy for details
Qualifications and Certifications UL Listing QIGU.E173074 NEC 2008 Compliant, UL 1703, ISO 9001, and ISO 14001 UL1703 Certified and Registered, UL Fire Safety Class C, CEC, FSEC Certified IEC61215 Ed 2 IEC61730 by JET
• Available Upon Request •
KD 200-60 P Series
Electrical SPECIFICATIONS
Module Characteristics
Standard Test Conditions (STC)
STC = 1000 W/M2 irradiance, 25oC module temperature, AM 1.5 spectrum*
KD235GX-LPB KD240GX-LPB KD245GX-LPB KD250GX-LPB (Preliminary) Pmp
235
240
245
250
W
Vmp
29.8
29.8
29.8
29.8
V
Imp
7.89
8.06
8.23
8.39
A
Voc
36.9
36.9
36.9
36.9
V
Isc
8.55
8.59
8.91
9.09
A
Ptolerance
+5/-3
+5/-3
+5/-3
+5/-3
%
Dimensions: length/width/height
65.43in/38.98in/1.8in (1662mm/990mm/46mm)
Weight:
46.3lbs (21.0kg)
PACKAGING SPECIFICATIONS Modules per pallet:
20
Pallets per 53’ container:
36
Pallet box dimensions: length/width/height
66.54in/39.76in/47.24in (1690mm/1010mm/1200mm)
Pallet box weight:
1050 lbs (480kg) KD 200-60
Nominal Operating Cell Temperature Conditions (NOCT)
4.45in 113mm
C
Pmax
169
172
176
TBD
W
Vmp
26.8
26.7
26.8
TBD
V
Imp
6.31
6.45
6.58
TBD
A
Voc
33.7
33.7
33.7
TBD
V
Isc
6.92
6.95
7.21
TBD
A
PTC
212.6
217.3
219.1
TBD
W
(IP65) 46.9in 1190mm
o
37.8in 960mm
TBD
11.06in 281mm
45
21.65in 550mm
45
STABILIZER BAR
Note cable length changes: (–) 37.8in/960mm (+) 46.9in/1,190mm
65.43in 1662mm
45
21.65in 550mm
TNOCT
1.8in 46mm
3.23in 82mm
NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*
Temperature Coefficients -0.46
-0.46
-0.46
TBD
%/oC
Vmp
-0.52
-0.52
-0.52
TBD
%/oC
Imp
0.0065
0.0064
0.0065
TBD
%/oC
Voc
-0.36
-0.36
-0.36
TBD
%/ C
Isc
0.060
0.060
0.060
TBD
%/oC
-40 to +90
-40 to +90
-40 to +90
TBD
.49in 12.5mm
38.98in 990mm
o
.47in 12mm
1.8in 46mm
Operating Temp
11.06in 281mm
STABILIZER BAR
Pmax
C
o
15 A
Series Fuse Rating
.41in 10.3mm
600 V
Maximum DC System Voltage (UL)
Long Side
1in (25mm) @ 51mph (23m/s)
Hailstone Impact
Short Side
1.8in 46mm
System Design
11.06in 281mm
1.18in 30mm
Expanded View of Grounding Holes
.79in 20mm
Frame Cross Section Diagrams
* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.
NEC 2008 Compliant UL 1703 Listed Certified IEC61215 Ed2 IEC61730 by JET
WARNING: Read the instruction manual in its entirety prior to handling, installing & operating Kyocera Solar modules.
101211
KYOCERA Solar, Inc.
MOUNTING HOLES .35in (9mm)
DRAINAGE HOLES
Our Valued Partner
800-223-9580 800-523-2329 fax
www.kyocerasolar.com
GROUND SYMBOL .35in (9mm)
HIGH EFFICIENCY MULTICRYSTAL PHOTOVOLTAIC MODULE
KD 315-80 P Series
(Pending UL Certification)
Cutting Edge Technology As a pioneer with over 35 years in the solar energy industry, Kyocera demonstrates leadership in the development of solar energy products. Kyocera’s Kaizen Philosophy, commitment to continuous improvement, is shown by repeatedly achieving world record cell efficiencies.
Quality Built In • UV stabilized, aesthetically pleasing black anodized frame • Supported by major mounting structure manufacturers • Easily accessible grounding points on all four corners for fast installation • Proven junction box technology with 12 AWG PV wire to work with transformerless inverters • Quality locking MC4 plug-in connectors to provide safe and quick connections
Reliable • Proven superior field performance • Tight power tolerance • Only module manufacturer to pass rigorous long-term testing performed by TÜV Rheinland
Warranty • Kyocera standard 20 year power output warranty and 5 year workmanship warranty applies in USA • Extended warranties available per project requirements • Kyocera standard 20 year power output warranty and 2 year workmanship warranty applies outside of USA • Refer to Kyocera warranty policy for details
Qualifications and Certifications UL Listing QIGU.E173074 NEC 2008 Compliant, UL 1703, ISO 9001, and ISO 14001 UL1703 Certified and Registered, UL Fire Safety Class C, CEC, FSEC Certified IEC61215 Ed 2 IEC61730 by JET
• Available Upon Request •
KD 315-80 P Series
These are preliminary electrical and mechanical specifications and could change in the future.
electrical SPECIFICATIONS
MECHANICAL SPECIFICATIONS KD 315-80 4.45in 113mm
Standard Test Conditions (STC)
1.8in 46mm
o
39.8
V
Imp
7.92
A
Voc
49.2
V
Isc
8.50
A
Ptolerance
+5/-3
%
50.8in 1290mm
Vmp
STABILIZER BAR
21.65in 550mm
W
65.43in 1662mm
315
21.65in 550mm
Pmp
(IP65)
40.9in 1040mm
KD315GX-LPB (Preliminary)
3.23in 82mm
11.06in 281mm
STC = 1000 W/M2 irradiance, 25 C module temperature, AM 1.5 spectrum*
Nominal Operating Cell Temperature Conditions (NOCT)
NOCT = 800 W/M2 irradiance, 20oC ambient temperature, AM 1.5 spectrum*
TNOCT
45
Pmax
226
W
Vmp
35.8
V
Imp
6.34
A
STABILIZER BAR
C
Voc
45.0
V
Isc
6.88
A
Pmax
-0.51
%/oC
Vmp
-0.52
%/oC
Imp
0.0064
%/oC
Voc
-0.36
%/oC
Isc
0.061
%/oC
-40 to +90
%/oC
11.06in 281mm
o
51.97in 1320mm
0.87in 22mm
Weight: 60.6lbs (28.0kg)
Temperature Coefficients
Operating Temp
System Design 15 A
Series Fuse Rating
600 V
Maximum DC System Voltage (UL)
1in (25mm) @ 51mph (23m/s)
Hailstone Impact
* Subject to simulator measurement uncertainty of +/- 3%. KYOCERA reserves the right to modify these specifications without notice.
NEC 2008 Compliant UL 1703 Listed Certified IEC61215 Ed2 IEC61730 by JET
WARNING: Read the instruction manual in its entirety prior to handling, installing & operating Kyocera Solar modules.
081211
KYOCERA Solar, Inc.
MOUNTING HOLES .35in (9mm)
DRAINAGE HOLES
Our Valued Partner
800-223-9580 800-523-2329 fax
www.kyocerasolar.com
GROUND SYMBOL .35in (9mm)
Solar Laminate PVL-Series
Model: PVL-68
®
• High Temperature and Low Light Performance • 5-Year Limited Product Warranty • Limited Power Output Warranty: 92% at 10 years, 84% at 20 years, 80% at 25 years (of minimum power) • Quick-Connect Terminals and Adhesive Backing • Bypass Diodes for Shadow Tolerance 68 Wp ±5%
Construction Characteristics Dimensions: Length: 2849 mm (112.1”), Width: 394 mm (15.5”), Depth: 4 mm (0.2”), 16 mm (0.6”) including potted terminal housing assembly Weight: 3.9 kg (8.7 lbs) Output Cables: 4 mm2 (12 AWG) cable with weatherproof DC-rated quick-connect terminals 560 mm (22“) length Bypass Diodes: Connected across every solar cell Encapsulation: Durable ETFE high light-transmissive polymer Adhesive: Ethylene propylene copolymer adhesive sealant with microbial inhibitor Cell Type: 11 triple junction amorphous silicon solar cells 356 mm x 239 mm (14” x 9.4”) connected in series Qualifications and Safety UL 1703 Listed by Underwriters Laboratories for electrical and fire safety (Class A Max. Slope 2/12, Class B Max. Slope 3/12, Class C Unlimited Slope fire ratings) for use in systems up to 600 VDC.
IEC 61646 and IEC 61730 certified by TÜV Rheinland for use in systems up to 1000 VDC.
Laminate Standard Configuration Photovoltaic laminate with potted terminal housing assembly with output cables and quick-connect terminals on top. Application Criteria* • Installation temperature between 10 °C - 40 °C (50 °F - 100 °F) • Maximum roof temperature 85 °C (185 °F) • Minimum slope: 3° (1/2:12) • Maximum slope 60° (21:12) • Approved substrates include certain membrane and metal roofing products. See United Solar for details. *Detailed installation requirements are specified in United Solar installation manuals.
Flexible
Lightweight
Durable
No-Glass
Shadow Tolerant
More kWh
High Temp Performance
Low Light Performance
Technical Data Sheet
Performance Characteristics Rated Power (Pmax): Production Pmax Tolerance:
#AA4-3698-04
Solar Laminate PVL-Series
Model: PVL-68
®
2849 (112,1")
394 (15,5")
IV Curves at various Levels of Irradiance at Air Mass 1.5 and 25 °C Cell Temperature STC (1000 W/m2)
1
2
3
5
6
7
10
11
All measurements in mm Inches in parentheses Tolerances: Length: ± 5 mm (1/4"), Width: ± 3 mm (1/8")
400 W/m2 200 W/m2
Voltage (V)
Electrical Specifications (Standard Test Conditions) (1000 W/m2, AM 1.5, 25 °C Cell Temperature)
NOCT (Nominal Operating Cell Temperature) (800 W/m2, AM 1.5, 1 m/sec. wind)
Maximum Power (Pmax): 68 W Voltage at Pmax (Vmp): 16.5 V Current at Pmax (lmp): 4.13 A Short-circuit Current (Isc): 5.1 A Open-circuit Voltage (Voc): 23.1 V Maximum Series Fuse Rating: 8 A
Maximum Power (Pmax): 53 W Voltage at Pmax (Vmp): 15.4 V Current at Pmax (lmp): 3.42 A Short-circuit Current (Isc): 4.1 A Open-circuit Voltage (Voc): 21.1 V NOCT: 46 °C
Temperature Coefficients (at AM 1.5, 1000 W/m2 irradiance) Temperature Coefficient (TC) of Isc: 0.001/°K(0.10%/°C) Temperature Coefficient (TC) of Voc: -0.0038/°K (-0.38%/°C) Temperature Coefficient (TC) of Pmax: -0.0021/°K (-0.21%/°C) Temperature Coefficient (TC) of Imp: 0.001/°K (0.10%/°C) Temperature Coefficient (TC) of Vmp: -0.0031/°K (-0.31%/°C) y = yreference • [1 + TC • (T- Treference)] Notes: 1. During the first 8-10 weeks of operation, electrical output exceeds specified ratings. Power output may be higher by 15%, operating voltage may be higher by 11% and operating current may be higher by 4%. 2. Electrical specifications are based on measurements performed at standard test conditions of 1000 W/m2 irradiance, Air Mass 1.5, and cell temperature of 25 °C after stabilization. 3. Actual performance may vary up to 10% from rated power due to low temperature operation, spectral and other related effects. Maximum system open-circuit voltage not to exceed 600 VDC per UL, 1000 VDC per TÜV Rheinland. 4. Specifications subject to change without notice. Your UNI-SOLAR® Distributor:
9
Quick Connects Terminals
600 W/m2
STC
8
PVL-68
800 W/m2 Current (A)
4
Global Headquarters United Solar Ovonic LLC 2956 Waterview Drive Rochester Hills, MI 48309 Tel: 248.293.0440 Fax: 248.844.1214 Toll Free (USA): 1.800.528.0617 info@uni-solar.com European Headquarters United Solar Ovonic Europe SAS Tour Albert 1er 65, avenue de Colmar 92507 Rueil-Malmaison Cedex Tel: +33.1.74.70.46.24 Fax: +33.1.41.39.00.22 franceinfo@uni-solar.com German Office United Solar Ovonic Europe GmbH Trakehner Strasse 7- 9 60487 Frankfurt/Main Tel: +49.69.7137667.0 Fax: +49.69.7137667.67 europeinfo@uni-solar.com Italian Office United Solar Ovonic Europe GmbH Via Monte Baldo, 4 37069 Villafranca (VR) Tel: +39.045.8600982 Fax: +39.045.8617738 italyinfo@uni-solar.com Spanish Office United Solar Ovonic Europe GmbH C/Jose Ortega y Gasset 25 28006 Madrid Tel: +34 911269051 Fax: +34 911852670 spaininfo@uni-solar.com www.uni-solar.com A subsidiary of Energy Conversion Devices, Inc. (Nasdaq: ENER)
© Copyright 2009 United Solar Ovonic - All Rights Reserved
#AA4-3698-04
Solar Laminate PVL-Series
Model: PVL-136
®
• High Temperature and Low Light Performance • 5-Year Limited Product Warranty • Limited Power Output Warranty: 92% at 10 years, 84% at 20 years, 80% at 25 years (of minimum power) • Quick-Connect Terminals and Adhesive Backing • Bypass Diodes for Shadow Tolerance 136 Wp ±5%
Construction Characteristics Dimensions: Length: 5486 mm (216”), Width: 394 mm (15.5”), Depth: 4 mm (0.2”), 16 mm (0.6”) including potted terminal housing assembly Weight: 7.7 kg (17.0 lbs) Output Cables: 4 mm2 (12 AWG) cable with weatherproof DC-rated quick-connect terminals 560 mm (22“) length Bypass Diodes: Connected across every solar cell Encapsulation: Durable ETFE high light-transmissive polymer Adhesive: Ethylene propylene copolymer adhesive sealant with microbial inhibitor Cell Type: 22 triple junction amorphous silicon solar cells 356 mm x 239 mm (14” x 9.4”) connected in series Qualifications and Safety UL 1703 Listed by Underwriters Laboratories for electrical and fire safety (Class A Max. Slope 2/12, Class B Max. Slope 3/12, Class C Unlimited Slope fire ratings) for use in systems up to 600 VDC.
IEC 61646 and IEC 61730 certified by TÜV Rheinland for use in systems up to 1000 VDC.
Laminate Standard Configuration Photovoltaic laminate with potted terminal housing assembly with output cables and quick-connect terminals on top. Application Criteria* • Installation temperature between 10 °C - 40 °C (50 °F - 100 °F) • Maximum roof temperature 85 °C (185 °F) • Minimum slope: 3° (1/2:12) • Maximum slope 60° (21:12) • Approved substrates include certain membrane and metal roofing products. See United Solar for details. *Detailed installation requirements are specified in United Solar installation manuals.
Flexible
Lightweight
Durable
No-Glass
Shadow Tolerant
More kWh
High Temp Performance
Low Light Performance
Technical Data Sheet
Performance Characteristics Rated Power (Pmax): Production Pmax Tolerance:
#AA4-3697-04
Solar Laminate PVL-Series
Model: PVL-136
®
IV Curves at various Levels of Irradiance at Air Mass 1.5 and 25 °C Cell Temperature 394 (15,5")
5486 (216.0")
1
2
3
4
5
STC (1000 W/m2)
6
7
8
9
10
11
12
800 W/m Current (A)
14
15
16
17
18
19
20
21
22
PVL-136
2
Quick-Connect Terminals
All measurements in mm Inches in parentheses Tolerances: Length: ± 5 mm (1/4"), Width: ± 3 mm (1/8")
600 W/m2 400 W/m2 200 W/m2
Voltage (V)
Electrical Specifications STC (Standard Test Conditions) (1000 W/m2, AM 1.5, 25 °C Cell Temperature)
NOCT (Nominal Operating Cell Temperature) (800 W/m2, AM 1.5, 1 m/sec. wind)
Maximum Power (Pmax): 136 W Voltage at Pmax (Vmp): 33.0 V Current at Pmax (lmp): 4.13 A Short-circuit Current (Isc): 5.1 A Open-circuit Voltage (Voc): 46.2 V Maximum Series Fuse Rating: 8 A
Maximum Power (Pmax): 105 W Voltage at Pmax (Vmp): 30.8 V Current at Pmax (lmp): 3.42 A Short-circuit Current (Isc): 4.1 A Open-circuit Voltage (Voc): 42.2 V NOCT: 46 °C
Temperature Coefficients (at AM 1.5, 1000 W/m2 irradiance) Temperature Coefficient (TC) of Isc: 0.001/°K(0.10%/°C) Temperature Coefficient (TC) of Voc: -0.0038/°K (-0.38%/°C) Temperature Coefficient (TC) of Pmax: -0.0021/°K (-0.21%/°C) Temperature Coefficient (TC) of Imp: 0.001/°K (0.10%/°C) Temperature Coefficient (TC) of Vmp: -0.0031/°K (-0.31%/°C) y = yreference • [1 + TC • (T- Treference)]
Notes: 1. During the first 8-10 weeks of operation, electrical output exceeds specified ratings. Power output may be higher by 15%, operating voltage may be higher by 11% and operating current may be higher by 4%. 2. Electrical specifications are based on measurements performed at standard test conditions of 1000 W/m2 irradiance, Air Mass 1.5, and cell temperature of 25 °C after stabilization. 3. Actual performance may vary up to 10% from rated power due to low temperature operation, spectral and other related effects. Maximum system open-circuit voltage not to exceed 600 VDC per UL, 1000 VDC per TÜV Rheinland. 4. Specifications subject to change without notice. Your UNI-SOLAR® Distributor:
13
Global Headquarters United Solar Ovonic LLC 2956 Waterview Drive Rochester Hills, MI 48309 Tel: 248.293.0440 Fax: 248.844.1214 Toll Free (USA): 1.800.528.0617 info@uni-solar.com European Headquarters United Solar Ovonic Europe SAS Tour Albert 1er 65, avenue de Colmar 92507 Rueil-Malmaison Cedex Tel: +33.1.74.70.46.24 Fax: +33.1.41.39.00.22 franceinfo@uni-solar.com German Office United Solar Ovonic Europe GmbH Trakehner Strasse 7- 9 60487 Frankfurt/Main Tel: +49.69.7137667.0 Fax: +49.69.7137667.67 europeinfo@uni-solar.com Italian Office United Solar Ovonic Europe GmbH Via Monte Baldo, 4 37069 Villafranca (VR) Tel: +39.045.8600982 Fax: +39.045.8617738 italyinfo@uni-solar.com Spanish Office United Solar Ovonic Europe GmbH C/Jose Ortega y Gasset 25 28006 Madrid Tel: +34 911269051 Fax: +34 911852670 spaininfo@uni-solar.com www.uni-solar.com A subsidiary of Energy Conversion Devices, Inc. (Nasdaq: ENER)
© Copyright 2009 United Solar Ovonic - All Rights Reserved
#AA4-3697-04
Solar Laminate PVL-Series
Model: PVL-144
®
• High Temperature and Low Light Performance • 5-Year Limited Product Warranty • Limited Power Output Warranty: 92% at 10 years, 84% at 20 years, 80% at 25 years (of minimum power) • Quick-Connect Terminals and Adhesive Backing • Bypass Diodes for Shadow Tolerance 144 Wp ±5%
Construction Characteristics Dimensions: Length: 5486 mm (216”), Width: 394 mm (15.5”), Depth: 4 mm (0.2”), 16 mm (0.6”) including potted terminal housing assembly Weight: 7.7 kg (17.0 lbs) Output Cables: 4 mm2 (12 AWG) cable with weatherproof DC-rated quick-connect terminals 560 mm (22“) length Bypass Diodes: Connected across every solar cell Encapsulation: Durable ETFE high light-transmissive polymer Adhesive: Ethylene propylene copolymer adhesive sealant with microbial inhibitor Cell Type: 22 triple junction amorphous silicon solar cells 356 mm x 239 mm (14” x 9.4”) connected in series Qualifications and Safety UL 1703 Listed by Underwriters Laboratories for electrical and fire safety (Class A Max. Slope 2/12, Class B Max. Slope 3/12, Class C Unlimited Slope fire ratings) for use in systems up to 600 VDC. IEC 61646 and IEC 61730 certified by TÜV Rheinland for use in systems up to 1000 VDC. Laminate Standard Configuration Photovoltaic laminate with potted terminal housing assembly with output cables and quick-connect terminals on top. Application Criteria* • Installation temperature between 10 °C - 40 °C (50 °F - 100 °F) • Maximum roof temperature 85 °C (185 °F) • Minimum slope: 3° (1/2:12) • Maximum slope 60° (21:12) • Approved substrates include certain membrane and metal roofing products. See United Solar for details. *Detailed installation requirements are specified in United Solar installation manuals.
Flexible
Lightweight
Durable
No-Glass
Shadow Tolerant
More kWh
High Temp Performance
Low Light Performance
Technical Data Sheet
Performance Characteristics Rated Power (Pmax): Production Pmax Tolerance:
#AA5-3636-03
Solar Laminate PVL-Series
Model: PVL-144
®
IV Curves at various Levels of Irradiance at Air Mass 1.5 and 25 °C Cell Temperature 394 (15,5")
5486 (216.0")
STC (1000 W/m2)
1
2
3
4
5
6
8
9
10
11
12
13
15
16
17
18
19
20
21
22
Quick-Connect Terminals
600 W/m
2
All measurements in mm Inches in parentheses Tolerances: Length: ± 5 mm (1/4"), Width: ± 3 mm (1/8")
400 W/m2 200 W/m2
Voltage (V)
Electrical Specifications STC (Standard Test Conditions) (1000 W/m2, AM 1.5, 25 °C Cell Temperature)
NOCT (Nominal Operating Cell Temperature) (800 W/m2, AM 1.5, 1 m/sec. wind)
Maximum Power (Pmax): 144 W Voltage at Pmax (Vmp): 33.0 V Current at Pmax (lmp): 4.36 A Short-circuit Current (Isc): 5.3 A Open-circuit Voltage (Voc): 46.2 V Maximum Series Fuse Rating: 8 A
Maximum Power (Pmax): 111 W Voltage at Pmax (Vmp): 30.8 V Current at Pmax (lmp): 3.6 A Short-circuit Current (Isc): 4.3 A Open-circuit Voltage (Voc): 42.2 V NOCT: 46 °C
Temperature Coefficients (at AM 1.5, 1000 W/m2 irradiance) Temperature Coefficient (TC) of Isc: 0.001/°K(0.10%/°C) Temperature Coefficient (TC) of Voc: -0.0038/°K (-0.38%/°C) Temperature Coefficient (TC) of Pmax: -0.0021/°K (-0.21%/°C) Temperature Coefficient (TC) of Imp: 0.001/°K (0.10%/°C) Temperature Coefficient (TC) of Vmp: -0.0031/°K (-0.31%/°C) y = yreference • [1 + TC • (T- Treference)]
Notes: 1. During the first 8-10 weeks of operation, electrical output exceeds specified ratings. Power output may be higher by 15%, operating voltage may be higher by 11% and operating current may be higher by 4%. 2. Electrical specifications are based on measurements performed at standard test conditions of 1000 W/m2 irradiance, Air Mass 1.5, and cell temperature of 25 °C after stabilization. 3. Actual performance may vary up to 10% from rated power due to low temperature operation, spectral and other related ef effects. Maximum system open-circuit voltage not to exceed 600 VDC per UL, 1000 VDC per TÜV Rheinland. 4. Specifications subject to change without notice. Your UNI-SOLAR® Distributor:
14
PVL-144
800 W/m2 Current (A)
7
Global Headquarters United Solar Ovonic LLC 2956 Waterview Drive Rochester Hills, MI 48309 Tel: 248.293.0440 Fax: 248.844.1214 Toll Free (USA): 1.800.528.0617 info@uni-solar.com European Headquarters United Solar Ovonic Europe SAS Tour Albert 1er 65, avenue de Colmar 92507 Rueil-Malmaison Cedex Tel: +33.1.74.70.46.24 Fax: +33.1.41.39.00.22 franceinfo@uni-solar.com German Office United Solar Ovonic Europe GmbH Robert-Koch-Strasse 50 55129 Mainz Tel: +49.6131.240.40.400 Fax: +49.6131.240.40.499 europeinfo@uni-solar.com Italian Office United Solar Ovonic Europe GmbH Via Monte Baldo, 4 37069 Villafranca (VR) Tel: +39.045.8600982 Fax: +39.045.8617738 italyinfo@uni-solar.com Spanish Office United Solar Ovonic Europe GmbH Sucursal Spain C/ Llull, 321-329 08019 Barcelona Tel: +34 935530752 Fax: +34 935530753 spaininfo@uni-solar.com www.uni-solar.com A subsidiary of Energy Conversion Devices, Inc. (Nasdaq: ENER)
© Copyright 2009 United Solar Ovonic - All Rights Reserved
#AA5-3636-03