Drive_Yoke_Flinger_Instructions.pdf

W.S. DARLEY & CO. WATER FLINGER INSTALLATION INSTRUCTION

Place 4431200 assembly tool on bed of press Place 3206100 water flinger over 4431200 assembly tool as shown in Fig 1a. Apply Loctite #603 to inside flinger surface.

Fig 1a

Position drive yoke on top of water flinger keeping it straight and centered. (See Fig 1b)

Fig 1b Prepared by: JSS Approved by: TED

1

Rev. #: 0 Date:11/11/04 1201023

When yoke is positioned properly, press into place. Yoke will stop when it is fully seated as shown in Fig 2a.

Fig 2a Inspect flinger/yoke assembly to make sure faces are flush as shown in Fig 2b.

Fig 2b

Prepared by: JSS Approved by: TED

2

Rev. #: 0 Date:11/11/04 1201023