WORKFOLIO by DARPAN KALYANI

â&#x20AC;&#x153; Its art if cant be explained, its passion if no one asks for an explanation. its design if it doesn't need explanation.â&#x20AC;? -Wouter Stokkel.

Darpan Kalyani

Interior Designer Workfolio

RESIDENTIAL LANDSCAPE DESIGN

Seating Element Around a tree c

Paved Passage Thick Foliage Of Trees

Thick Foliage Of Trees

Dencer to Thiner Foliage Of Trees

Seating Element

Stone Paved Platform

Stone Paved Platform Wooden Deck

Meditation Area a’

Wooden Deck

Water Body

Paved Passage

Grass Lawn Paved Passage Walkways

Plan of Seating Area Stepped Plantation

Thick Foliage Of Plant Entrance

Thick Foliage Of Trees

View of Seating area and Water Body b’

c’

Brick Paved Parking Area

Plan

Thick Foliage Of Trees Stone Paved Platform Water Falling Aroung The Meditation Platform

Section a-a’ Seating Around Tree

Seating & Deck

Water Body Stone Steps to Move Down into the Platform

Meditation Area

Plan of Meditation Area Section b-b’ Green Shed Parking

Meditation Area

Stepped plantation

Seating & Deck

Section c-c’’

View of the Water Falling in & the Platform

The breif was to design a residential landscape for the site provided taking in mind the built and its context. the site is situated in Ahmedabad. the challenge was to utilize the available land mass judiciously so as it responds well to the interior spaces and yet creates a buffer environment between the surrounding and the built. a holistic

L A N D S C A P E D E S I G N

HERITAGE MUSEUM DESIGN

B' C'

14 19

16 17 18

applying the concept of golden ratio into individual room planning to get each interior spaces proportionate. application of concept is done by making various compositions using golden ration and than including some lines which mean and eleminatingthose

Furniture and the display units were also worked out u s i n g t h e

8 9 10

7 6

1 2

Plan

Section a-

1. Reception 2. Foyer 3. Introduction to Museum 4. Art Gallery 5. Cultural Museum 6. Souvenir Shop 7. Library 8. Reading Area 9. Sculpture Gallery 10.Cafeteria 11. Indian Art Museum 12.A.V.Room 13.Administration 14.Workshop 15.Public Toilet 16.Performing Art

A view of passage and the a walkway made over the landscaped

A view of the Indian Musical Instruments Gallry. each instrumrnt is followed with its

The breif was to design a museum. the site selected was GANDHI ASHRAM, Ahmedabad ( A Charles Correa Design). the site selected had all features to be developed as a museum. the typology of museum to be developed was heritage museum. the designing started with the basic strategy of architectural heritage which

A view of Performing Art Museum showcasing each Indian dance style along with all its information costume

R E C R E A T I O N A L S T U D I O

CORPORATE OFFICE FOR A SOFTWARE COMPONY COMPONY

1. Reception 2. Foyer 3. H.R.D. Director’s Cabin 4. H.R.D. Manager’s Cabin 5. Junior’s Workstation 6. Accounts Dept. Manager’s Cubical 7. Junior’s Workstation 8. Dining Area

View of the Reception

1. Reception Area 2.Foyer & Waiting Area

Enlared Plan of Reception Ground Floor Plan

Ground Floor had an advantage of double height available and hence was reasonably correct to place the reception area in the center resulting in an grand office entrance and reception area .

1. Server Room 2. Main Conference(11 ppl.) 3. Electric Room 4. General Manager’s Cabin

View of the Waiting

Enlared Section of Reception View of the H.R.D. Dept.

Mezzaninne Floor since had very low height could not be used for main woking area and hence was selected for the server room, electric room, conference room and for other services

Mezzanine Floor

Enlared Section of Director’s & Manager’s View of the Conference Room

The brief was to design a office for a software designing company on the site located in Vallabh Vidhya Nagar. the designing started with the basic idea of hi-tech software graphics which were than followed in plan and elevations. as per the various case studies done various departments and their roles were enlisted and an

C O R P O R A T E S T U D I O

CORPORATE OFFICE FOR A SOFTWARE COMPONY COMPONY

A view of President’s Cabin

1. Conference Room (8 Seater) 2. junior’s Workstation 3. Design DepT. Manager 4. Design Dept. General Manager 5. Design Dept. director’s Cabin 6. Vice President’s Cabin 7. Assistant’s Table 8. President’s Cabin 9. Sales Dept. Director’s Cabin 10.Sales Dept. General Manager 11. Manager’s Cubical

C.E.O. Cabin

1. Seating for Two People 2.President’s Table 3.Rest Room

First Floor

Waiting and the Rest Room of President’s Cabin

Section a-a’ Section Through Junior’s First Floor with the maximum carpet area had the maximum possibility to be used for the working space and hence was chosen to serve working area for two major departments i.e. design & sales department. this floor also had two major cutoutsin the floor plane making it more interactive with nature and hence permitted natural

A View of Manager’s Cubical & Workstation

Section Through Manager’s

Section b-b’

General Manager’s Cabin View

Each department had its Director, general manager, manager & juniors working under him who were always placed together so as their working could be smoothly managed. the President and the vise president were placed on first floor central locations as they being the head can keep an eye on whole of the working of the

C O R P O R A T E S T U D I O

RESIDENTIAL DESIGN EXERCISE

T H I N K

connecti ng

4.6

SITE PLAN Entrance &living

VIEW OF THE HOUSE

O U T

swimming pool

PLAN

VIEW OF THE DECK

PROPOSED PLAN

T H E

SECTION A-A’ FURNITURE AS THE RESULTANT OF THE

VARIOUS COMPOSITIO NS OF THE CUBOID TO

O F

B O

SECTION SECTION B-B’

the breif was to design a residence for a creative person on the site provided using a box of dimension 3x3x4.6m .The site here is located in goa facing sea on its north and surrounded by a thick foliage of trees on its west side enhancing the scenic beauty.My proposal was a residence for an author.By trying various

UNDERGROUND WORKING STUDIO AND

SPORTS SHOWROOM DESIGN

a’

Plan b

6mm thk Teak wood

M.S.Rod (6mm dai.) 18mm thk. plywood 18mm thk. T.W. beading c

18mm thk plywood

Plan at a-a’

a b’

Section b-

Elevatio M.S.Box sec(20x20x1mm.thk)

18mm thk plywood

Pla

18mm thk plywood 18mm.thk.plywood Facia 18mm.thk.plywood

Screw

Section a-

Screw

Detail at a M.S.Rod (6mm dai.)

Assembly Drawing of the

18mm.thk.plywood

Headless Nails

FURNITUR

Section a-

18mm.thk.plywood

Screw

M.S.Rod (6mm dai.)

18mm.thk.plywood

18mm thk. T.W. beading

18mm.thk.plywood

Detail at b Detail at d

the breif was to design a sport shop on the site provided of dimension 10x6x3.2 m. based on the case study of some sports showroom like sports sx and puma a proposal was made which displayed both indoor and outdoor games and sport products and accesories .the design incorporated the display and storage for the

Detail at c

SPORTS SHOWROOM DESIGN

19mm.thk. plywood Headless nails teak wood batten Teak wood batten 10mm. Acrylic sheet 12 mm. plywood facia Handle

S.S. Studs 19 mm. thk. plywood

Teak wood joist (40x50) 19mm.thk. plywood 2 19mm. plywood glued toghether M.S.box sec.

S.S.Buffers

Billing Counter cum Wall Display

Front Elevation

section a-a’ T.W. Frame

section a-a’ section b-b’

Front Elevation of the Display Panel Screw 12mm. thk. plywood

Back Panel with the Display niche

12mm.thk. plywood

19 mm. thk. plywood

wall

Headless nails

Side Table

Teak wood framework (50x40mm.)

Storage Unit

19mm.thk. plywood

Teak wood framework (50x40mm.) 10mm. thk. Acrylic Sheet S.S. Studs

Plan

Tenon and Mortice joint

Detail at b Teak wood joist (40x50)

19mm.thk. plywood

Plan at 1300

Screw

Screw 2 19mm. plywood glued toghether

Telescopic Channels (length 600mm.)

FURNITUR

M.S.box section

12mm.thk. plywood

Drawer Detail

Assembly Drawing of the Panel

D E S I G N

Screw

19mm.thk. plywood 12mm.thk. plywood

F U R N I T U R E

Detail at a

Furniture 2 : the billing counter and the display panel were designed in such a way that it serves the function yet it also enhances the aesthetical value of the space playing with the inclined planes the furniture has an unbuilt niche which is utilized for the display and coming out of the panel is the billing counter with the drawer unit. whole

CLASS-ROOM FOR DISABLED STUDENTS

1. Entrance 2.Book shelf 3.Proffesor’s Desk 4.Book shelf 5.Student’s desk 6.Pin boards

a’ a

5. b

b’ 4. 1.

Side Elevation

Front Elevation

Plan

Section c-c’ 6mm. Thk. Flexiply

c’

Plan Screw

Wall

Section a-a’

6mm. Thk. Flexiply

Wall

3mm. Thk. New wood

Section b-b’

FURNITUR

P.V.C Fastner

1mm. Thk. 8mm.Thk. New wood M.S. flat (Facia) M.S. Box sec.(20X20X1mm.)

Screw

6mm. Thk. Flexiply

1mm. Thk. M.S. flat

6mm. Thk. Flexiply M.S. Box sec.(20X20X1mm.)

Wall-Shelf Junction Detail

Detail at a

the breif was to design a class-room for disabled students where disability catered was leg disability and then study any three furniture in detail with ergonomics and other constructional details. The dimension of the site were 8X7 m. in the proposal an effort was made to make them feel normal and suffices them for all their need and

CLASS-ROOM FOR DISABLED STUDENTS

Side Elevation

a’

M.S. box sec. (20x20x1)

Table unit

Plan

Duco paint over H.D.F. 3mm. thk. H.D.F.

wall

PROFFESSOR’S DESK WITH

Elevation

Front Elevation

P.V.C.fastner

Welded (electronic welding) M.S.box sec (20x20x2mm.thk.)

Wall 6mm. thk. flexiply

Drawer unit

Isomertic View

Detail at a

Plan Flexiply

M.S.box sec (20x20x2)

3mm. thk. H.D.F. M.S.box sec. Telescopic channels Flexiply +H.D.F. +duco

Flexiply (6mm. thk.) plywood (6mm. thk.)

M.S.box sec (20x20x2mm.thk.)

Section a-a’

3mm.thk. H.D.F.

Welded (electronic welding)

screw M.S.box sec. welded M.S.box sec. 3mm. thk. H.D.F. Rubber buffers

Detail at b

Section b-b’ Duco over H.D.F.

Plywood (19mm.thk.)

Structural Detail of the Table

Teakwood frame (20x30) Plywood (12mm. thk.)

Wall Grey Color Duco Paint 3mm. thk. H.D.F. Grey Laminte 6mm. thk. Flexiply M.S.box sec (20x20x2mm.thk.)

Plywood(12mm. thk.)

19mm thk. ply apron

Assembly Drawing of Table

Flexiply (6mm. thk.) Flexiply (6mm. thk.) Drawer Handle S.S. buffers

Plywood(12mm. thk.)

S.S. buffers

S.S. basket for storing files

basket drawer

FURNITUR

Flexiply (6mm. thk.) Welded Telescopic channels M.S. box sec.(20x20)

6mm. thk. flexiply screw

Wall Junction detail M.S.box sec (20x20x2mm.thk.)

Screw

6mm. thk. flexiply

Furniture 2 is a table with the storage unit designed for the professor taking in consideration that the professor wouldn't be physicaly disables and serves all in its best with ergonomics and all details worked out. Furniture 3 is the table for the students with the storage unit into it. Each table serves 2 students with the

Plywood (19mm.thk.)

Shelf Joining detail

ABSTRACT EXERCISE

B A S I C the exercise aimed to develop a sense of new visualization of the spaces seen regularly in an irregular way by distorting it and further composing them to form abstract compositions leading into new three dimensional structural and volumetric compositions.

D E S I G N 2

The brief of the exercise was to sketch three different views and then distort them in different ways. The distorted sketches were then rendered in two different ways, Black - white and two color using their tints and shades. Then the 2D sketches were converted to 3D using various materials and by adding surfaces to them. Then the various forms and spaces were studied and a furniture or an interior space was designed as a final product to the exercise.

CUBE DEVELOPMENT EXERCISE

Cube is a geometry which can be played in a no. of ways to develop a spacial understanding through the volumes and voids created. It helps in developing compositional sense, sense of proportion and most importantly in the third dimension. A cube is a three dimensional solid object bounded by six square faces. It has cubical symmetry.

B A S I C D E S I G N 1

The brief of the exercise started with the development of three different cubes of dimension 6 x 6 inch. Then each side of the cubes were further divide by making grids and then painted using the grey scale. Then three different models were made creating negative and positive according to the nature of the color, then dibbuk models were made using wire to study the spaces created inside them.

LEAF EXERCISE

Few leaves were selected to make compositions so as there is a sence of continuity and oneness yet leaves retain their identity. The compositions then were analysed and intresting portions were then used for making tile.

Desiring and abstracting the forms obtained by analysing the wire model some more wire models were produced which were then enlarged and covered by some transparent, transluscent and opaque surfaces. The model thus formed was than visualised as a living space and functional analysis was done.

B A S I C D E S I G N

The leaves selected were minutely observed and their wire models were made to understand the primary, secondary and tertiary structures of leaf, the exercise took an intresting form as the wire structures were composed in different ways and were then clicked in the natural and artificial light creating a playful exercise of light

Intresting areas from the composition formed were than enlarged and following the continuity were carried forward to result in tile and their following pair tile.

The exercise initiated with the sketching of various leaves to observe and understand its forms and shapes. Few leaves were than selected and composed in such a way that there was some sense of oneness by following the veins yet each leaf retain its identity in the composition. The exercise was than carry forward by making various wire models and observing them under light. The observations were than extended by sketching the forms out of the model deriving in three dimensional understanding of spaces.