7 Easy Ways to Cut Metal Fast Anyone who has attempted to cut metal in their home shop with nothing besides a hacksaw is bound to have wished to themselves to find an easier way. While hacksaws are versatile tools, there are times when they simply won't cut across those huge chunks of metal. This is when there is a need to turn to easier and faster tools. Here are some of the types of cutting tools that you can employ to cut metal: 1. Angle Grinder An angle grinder that is fitted with an abrasive cutting disc works to cut all sorts of metal with ease, including the likes of bolts, iron, and metal sheets. The disks, however, wear out quickly and shrink in diameter with continual use. A diamond blade, however, overcomes this drawback and is ideal to cut ferrous metal. 2. Circular Saw When fitted with the right blade, a circular saw is the perfect metal cutting tool. One of the things one needs to be careful about when it comes to this type of cutting tool is that the hot metal chips fly everywhere, so safety is of the essence. Make sure that you have your safety gear on and keep bystanders as far away as possible. 3. Miter Saw A miter saw and blade would help you make accurate cuts on aluminum rods, tubes, and angles. If the motor housing on your saw is open, be sure to tape a piece of cloth over the openings to protect the motor windings and bearings when cutting past the metal. 4. Power Hacksaw The power version of a hacksaw is pretty much like a regular saw with the upper hand of power. For cutting steel, in particular, it is very useful, but you might face some trouble in getting a good square cut. 5. An Oscillating tool If you need to make a flush cut, then an oscillating tool fitted with a metal cutting blade is ideal to solve the problem. With the help of an oscillating tool, corroded mounting nuts on faucets and toilets are easy to cut. It can also be used to cut plumbing pipes, automotive bolts, nails and so on where a larger tool would not fit in.
6. Reciprocating or Recip Saw Instead of a hacksaw, you can use a reciprocating saw. All you need is to mount a metal cutting blade in your recip saw and you are equipped with the ultimate power hacksaw which can be used to cut bolts, rods, pipes, and angle iron. A recip saw with a metal cutting blade works great for remodeling when there are nails or pipes to cut off. 7. Grinder Metal lathe and hardware cloth can be cut with a diamond blade mounted on your angle grinder. A diamond blade that has been labeled as a ferrous metal cutting blade is recommended for the same. The next time you are required to cut metal, look beyond the regular hacksaw and make use of some of the tools mentioned in this post. For more information, visit: https://www.suncoasttools.com/