Common Symptoms of Mini Cooper Camshaft Position Sensor Failure in Denver All the sensors of the vehicle are playing an important role in running the engine properly. Among the several sensors of the Mini Cooper, the camshaft position sensor is informing the computer about the current position of the camshaft while starting the vehicle. Moreover, the camshaft is raising and lowering the pistons of the vehicle. On the other hand, it is running with the crankshaft and the sensor to know the amount of fuel release in the cylinder and spark plugs to fire. If the ECU of the Mini does not have enough information about the air and fuel mixture, then it is unable to run it smoothly. The following points define the symptoms of the failed camshaft position sensor in the Mini Cooper.
Jerking or stalling When you are starting the vehicle, its computers check certain parts for its smooth functioning. If the camshaft position sensor of the Mini Cooper is failed in the middle of driving, then it may notice the check engine light in your vehicle. If you notice the poor functioning of the engine, then you might need to pull your vehicle to get it checked out. You can determine the issues easily when you feel jerks or lurches while driving the vehicle. The reason behind the issues is, the engine will lose power or an improper amount of fuel injected into the engine. Due to the failed sensor, the engine may be stalling and stop running right where it is at.
Reduced fuel mileage Moreover, the reduced fuel mileage is the common sign of failed camshaft position sensor in the Mini Cooper. In this condition, if your vehicle is running normally, then your fuel mileage is still reduced severely. Throughout the process, the extra amount of fuel is going into the wrong cylinders. When the cylinder is consuming an extra amount of fuel to spark, then it will create a large explosion in the cylinder and cause major engine damages. If you are driving your Mini with a bad camshaft position sensor, then the engine is not running efficiently and fails the engine entirely.
Activated check engine light Thus, the activated check engine light on the dashboard is the common sign of failed camshaft position sensor in the Mini. Because its computer is unable to figure out the related information
of the sensor. When you notice the check engine light, use an OBD2 sensor for determining the problem behind the camshaft position sensor. Otherwise, consult with a reputed auto repair shop to read the code for you. If the code indicates the failed camshaft position sensor, then consult with a reputed mechanic to fix the issues as soon as possible.
Poor acceleration When the camshaft position sensor of the Mini Cooper is failed, it will cause poor acceleration and hard starting issues. In this condition, you are unable to speed up the vehicle quickly because the wrong cylinders are getting the fuel or spark. At this point, the vehicle may only be able to get up to a certain speed because the engine is not able to put out its full power. If your vehicle won't reach its normal speed, then it is important to have it checked out. On the other hand, if the camshaft position sensor is failed, then it is unable to change the gears efficiently.
Ignition problems Apart from the activated check engine light, the ignition problems also indicate the failed camshaft position sensor in Mini Cooper. The reason behind this is, the sensor is giving wrong information to the computer and release gas into the wrong cylinders. However, another possible cause behind the failed camshaft position sensor is the wrong spark plugs. If you found problems while starting the vehicle with a good battery, then you should check out the position sensor to make sure that it is working properly.
Conclusion Before driving the Mini Cooper, you have to know all the details about the camshaft position sensors. Through the above-defined points, you can easily get to know about the symptoms of the bad camshaft position sensor. When it happens, you have to check out the sensor and have it replace if needed. If you are currently living in Denver, then consult with a reputed mechanic for inspecting the failed camshaft position sensor of the Mini Cooper and fix it as early as possible.