MD ZENIT Thermics pricelist 2014 eng by MD ZENIT d.o.o.

2014 CATALOGUE-PRICE LIST

Bilje 27 SI – 5292 Renče www.md-zenit.si +386 31 608 388

TABLE OF CONTENTS PAGE “DTH“ SERIES CPC DIRECT-FLOW VACUUM COLLECTOR “RTH“ SERIES CPC HEAT-PIPE VACUUM COLLECTOR INSTALLATION AND CONNECTION ACCESSORIES FOR RTH AND DTH COLLECTORS FTH 2.0 FLAT FORCED-CIRCULATION SOLAR COLLECTORS FTH 2.5 FLAT FORCED-CIRCULATION SOLAR COLLECTORS FTH 2.0 ECO FLAT FORCED-CIRCULATION SOLAR COLLECTORS FTH MEGA FLAT FORCED-CIRCULATION SOLAR COLLECTORS THERMAL-PHOTOVOLTAIC HYBRID COLLECTOR INSTALLATION AND CONNECTION ACCESSORIES FOR FTH COLLECTORS AND HYBRID MODULE DHW BOILERS - 1 FIXED HEAT EXCHANGER DHW BOILERS - 2 FIXED COILS DHW BOILERS - 2 PREASSEMBLED COILS DHW STORAGE TANKS DHW BOILERS - REMOVABLE COILS MULTIENERGY THERMAL INERTIAL STORAGE COMBI - ECO THERMAL INERTIAL STORAGE COMBI - TANK IN TANK THERMAL INERTIAL STORAGE COMBI - ECO THERMAL INERTIAL STORAGE PUFFER AND PUFFER STORAGE THERMAL INERTIAL STORAGE CORRUGATED AND STRIPWOUND STAINLESS-STEEL HOSES FTTINGS THERMICS 2-WAY SOLAR STATION - DN 20 / 2-WAY SOLAR UNIT—DN25 2-WAY SOLAR UNIT—DN32 DHW HEAT-EXCHANGER MODULES - WITH CONTROL UNIT < 20m2 DHW HEAT-EXCHANGER MODULES - WITH CONTROL UNIT < 50m2 SOLAR HEAT EXCHANGER MODULES TO PUFFER < 20m2 SOLAR HEAT EXCHANGER MODULES TO PUFFER < 50m2 SOLAR HEAT EXCHANGER MODULES TO PUFFER < 290 m2 - LARGE INSTALLATIONS DRAINBACK SOLAR STATIONS INSTANTANEOUS DHW PRODUCTION MODULES HIGH T HEATING UNITS CONTROL SYSTEMS HEAT EXCHANGERS FOR SWIMMING POOLS INSPECTABLE PLATE HEAT EXCHANGERS ANTIFREEZE LIQUIDS AND CLEANING FLUIDS MIXING/DIVERTER VALVES EXPANSION VESSELS SUMMER AIR-BASED DISSIPATORS FOR SOLAR INSTALLATIONS CTH - VENTILATED DISSIPATORS FOR INDUSTRIAL INSTALLATIONS HEAT PUMPS PTH - AIR-WATER HEAT PUMP THERMODYN: SOLAR-ASSISTED HEAT PUMP PAW - ECO: MONOBLOC AIR-WATER HEAT PUMP PAW - S: SPLIT AIR-WATER HEAT PUMP CALDENSA: SPLIT DIRECT CONDENSATION HEAT PUMP PWW: INDOOR ELECTRIC HEAT PUMPS SHC 10 - ZEOLITE ABSORBER FOR LOW TEMPERATURES SHC 18 - ZEOLITE ABSORBER FOR HIGH TEMPERATURES COMMON HEAT PUMP ACCESSORIES SYSTEMS SKYPOWER: VACUUM DHW SOLAR SYSTEM PEGASUS: FLAT DHW SOLAR SYSTEM RTH WATER - BASIC: DHW VACUUM SYSTEMS DTH WATER - PREMIUM: PREASSEMBLED DHW VACUUM SYSTEMS FTH WATER - BASIC: DHW FLAT SYSTEMS FTH WATER - PREMIUM: PREASSEMBLED DHW FLAT SYSTEMS ACQUEL 300: THERMAL SOLAR SYSTEM + HEAT PUMP HYBRID: ELECTRICAL AND HEAT ENERGY PRODUCTION SYSTEM COMBI - RTH SYSTEMS FOR HEATING INTEGRATION SHC: SOLAR COOLING & HEATING SYSTEMS PRE-CONFIGURED THERMAL SOLAR FIELDS FOR EXCHANGE WITH DHW STORAGE PRE-CONFIGURED THERMAL SOLAR FIELDS FOR EXCHANGE WITH HOT WATER THERMAL STORAGE GENERAL CONDITIONS OF SALE

www.md-zenit.si +386 31 608 388

4 5 6-7 8 9 10 11 12 14 - 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 – 37 - 38 39 40 - 41 42 43 44 45 46 47 48 49 51 52 - 53 54 55 56 – 57 - 58 59 60 61 62 - 63 64 66 - 67 68 - 69 70 71 72 73 74 75 76 - 77 78 - 79 80 81 82

FORCED-CIRCULATION SOLAR COLLECTORS

DTH - CPC “DTH“ SERIES DIRECT-FLOW VACUUM COLLECTOR DTH-CPC Thermics Direct Flow 10-tube solar collector, with vacuum tubes and direct coaxial circulation. Available in a single size to allow you to easily perform modular installations, it can be used in both small-scale residential and large-scale industrial applications.

POWER CURVE [W]

MODEL

10 DTH-CPC

Flow type

Direct coaxial flow Vacuum, hail-proof, with nextgeneration selective coating in three layers; thickness 2.2 mm; length 1800 mm; external diam. 58 mm 10

Tube specifications

Number of tubes Tube connection Gross dimensions (H×W×T) Heat exchanger

Parallel 1965x1132x140 mm

Gross collector area

2.22 m2

Aperture area

1.96 m2

Weight Fluid capacity in the collector Hydraulic fittings

49 kg

In coaxial copper, 14/8 mm

2.35 litres F22 screw-on

Nominal flow rate Maximum working pressure Efficiency η0

10 bar

1.41

Warranty

0.0033 Pitched/flat roof, vertical on wall, horizontal on wall 10 years

Certifications

12975, Solar Keymark, Impact test

CODE

PRODUCT

8TCO00018

DTH-CPC 10-tube direct-flow collector

Installation

120 lph

0.654

www.md-zenit.si +386 31 608 388

PRICE (€) 895.00

RTH - CPC “RTH“ SERIES HEAT-PIPE VACUUM COLLECTOR Thermics “D-COND” RTH series solar collector with vacuum tubes: Direct Condensation heat-pipe collection system with enlarged capillaries, cylindrical condensation chamber, highefficiency Cpc BLUE parabolic collector.

POWER CURVE [W]

MODEL

10 DTH-CPC

Flow type

Heatpipe Vacuum, hail-proof, with nextgeneration selective coating in three layers; thickness 2.2 mm; length 1800 mm; external diam. 58 mm 10

Tube specifications

Number of tubes Tube connection Gross dimensions (H×W×T) Heat exchanger

Series 1965x1132x140 mm

Gross collector area

2.20 m2

Aperture area

1.90 m2

Weight Fluid capacity in the collector Hydraulic fittings

44 kg

In copper with dry connection

0.9 litres F22 screw-on

Nominal flow rate Maximum working pressure Efficiency η0

120 lph 10 bar

1.03

0.0077

Installation

Pitched/flat roof

0.615

Warranty

5 years

Certifications

12975, Solar Keymark, Impact test

CODE

PRODUCT

8TCO00008

RTH-CPC 10-tube direct-flow collector

www.md-zenit.si +386 31 608 388

PRICE (€) 725.00

INSTALLATION AND CONNECTION ACCESSORIES FOR RTH AND DTH COLLECTORS

FASTENING KITS FOR RTH AND DTH COLLECTORS

CODE

PRODUCT

8TTE00050

Bent tile mount collector Fx base kit

75.74

8TTE00054

RTH DTH FTH triangle stand KIT 1

71.96

8TTE00056

KIT 2 Reinforced wind-proof steel cables

44.24

8TTE00060

KIT 2 Fx brackets to tiles

27.44

8TTE00062

KIT 2 Fx brackets to bent tiles

24.92

8TTE00064

KIT 2 long screws, L 300

19.04

8TTE00066

KIT 2 Fx brackets for slate/shingle roofs

24.64

8TTE00071

KIT 2 clamps for seamed corrugated metal roofs

45.24

8TTE00080

Base flashing kit

346.00

8TTE00082

Extension flashing kit

279.00

www.md-zenit.si +386 31 608 388

PRICE (€)

FITTINGS FOR RTH AND DTH COLLECTORS

CODE

PRODUCT

8TKR00275

Flexible fitting 22x22

20.86

8TKS00050

DTH/RTH CF fittings kit

36.61

www.md-zenit.si +386 31 608 388

PRICE (€)

FLAT FORCED-CIRCULATION SOLAR COLLECTORS

FTH 2.0 FTH 2.0 FLAT COLLECTOR Thermics FTH series flat solar collector. Collection system with highly selective aluminium sheeting laser welded to a copper heat exchanger with harp or meander layout.

FTH 2.0 Dry weight

34 kg

Gross surface area

2.15 m2

Opening area

2.00 m2

Efficiency η0

0.781

3.7

0.0141

Max. working pressure

10 bar

Installation angle

20 - 90°

Absorber material

Selective aluminium with copper tubing

Absorber type

Simple harp layout

Nominal flow rate

100 lph (low flow 50 lph)

Liquid content

1.13 litres

Insulation

50 mm high-density mineral wool

Chassis

Innovative, patented design for quick installation

Selective system

ETA PLUS very high efficiency

Flat glass

Structured, high strength

Connections

4 x Cu22 side

Installation

On façade / pitched roof / flat roof / integrated

Warranty

10 years

Ventilation

Patented anticondensing system

Certification

Solar keymark

CODE

PRODUCT

8TCO00210

FTH 2.0 Flat Collector

www.md-zenit.si +386 31 608 388

PRICE (€) 560.00

FTH 2.5 FTH 2.5 FLAT COLLECTOR Thermics FTH series flat solar collector. Collection system with highly selective aluminium sheeting laser welded to a copper heat exchanger with harp or meander layout.

FTH 2.5 Dry weight

39 kg

Gross surface area

2.51

Opening area

2.30

Efficiency η0

0.781

3.7

0.0141

Max. working pressure

10 bar

Installation angle

20 - 90°

Absorber material

Selective aluminium with copper tubing

Absorber type

Simple harp layout

Nominal flow rate

100 lph (low flow 50 lph)

Liquid content

1.30 litres

Insulation

50 mm high-density mineral wool

Chassis

Innovative, patented design for quick installation

Selective system

ETA PLUS very high efficiency

Flat glass

Structured, high strength

Connections

4 x Cu22 side

Installation

On façade / pitched roof / flat roof / integrated

Warranty

10 years

Ventilation

Patented anticondensing system

Certification

Solar keymark

CODE

PRODUCT

8TCO00220

FTH 2.5 Flat Collector

www.md-zenit.si +386 31 608 388

PRICE (€) 620.00

FLAT FORCED-CIRCULATION SOLAR COLLECTORS

FTH 2.0 - ECO

FTH 2.0 ECO FLAT COLLECTOR Thermics FTH series flat solar collector. Collection system with selective aluminium sheeting laser welded to a copper heat exchanger with meander layout.

FTH 2.0 ECO Dry weight

29 kg

Gross surface area

2.01

Opening area

1.85

Efficiency η0

0.748

3.93

0.0148

Max. working pressure

10 bar

Installation angle

20 - 90°

Absorber material

Selective aluminium with copper tubing

Absorber type

Meander layout

Nominal flow rate

120 lph (low flow 50 lph)

Liquid content

1.40 litres

Insulation

30 mm high-density mineral wool

Chassis

Quick installation

Selective system

Aluminium with selective coating

Flat glass

Structured, high strength

Connections

4 x Cu18 side

Installation

On façade / pitched roof / flat roof / integrated

Warranty

10 years

Ventilation

Patented anticondensing system

Certification

Solar keymark

CODE

PRODUCT

8TCO00240

FTH 2.0 ECO Flat collector

www.md-zenit.si +386 31 608 388

PRICE (€) 460.00

FTH-MEGA

FTH MEGA FLAT COLLECTOR Large surface area monobloc thermal solar collector suitable for large solar thermal installations on roofs or ground level. The plumbing and performance have been designed to optimise the thermal efficiency and reliability of the solar field under all conditions. The monobloc construction provides substantial savings in installation times and equipment, as well as in the cost of the product itself.

FTH 12.5 MEGA Dry weight

230 kg

Gross surface area

12.43

Opening area

11.5

Efficiency η0

0.781

3.7

0.0148

Max. working pressure

10 bar

Installation angle

20 - 75°

Absorber material

Selective aluminium with copper tubing

Absorber type

Harp layout

Insulation

60 mm high-density mineral wool

Chassis

Quick installation

Selective system

Aluminium with selective coating

Flat glass

Structured, high strength

Connections

2 x Cu28 side

Installation

On pitched roof / flat roof / integrated

Warranty

10 years

Ventilation

Patented anticondensing system

CODE

PRODUCT

8TCO00000

FTH 12.5 MEGA Flat collector

www.md-zenit.si +386 31 608 388

PRICE (€) POA

FORCED-CIRCULATION SOLAR COLLECTORS

THERMAL-PHOTOVOLTAIC HYBRID COLLECTOR Thermal photovoltaic module for production of electricity, domestic hot water and heating • •

80% of dataplate power for 25 years 10-year product warranty

THERMAL PARAMETERS Instantaneous absorption efficiency Coefficient of linear thermal dispersion Thermal coefficient Angle of incidence, reduced optical efficiency Peak thermal power

η0

0.650

7.500W/(m2 K)

0.012W/(m2 K2)

kΘ(50°C)

94% 1040 W

Pressure loss at nominal flow rate

150 mbar

Maximum temperature

80°C

Maximum pressure

3 bar

Minimum recommended flow rate

2 lpm

Empty module weight

31 Kg

Module fluid volume

1 litre

Gross area

1.66 m2

Open area

1.60 m2

Absorption area

1.60 m2

Tubing diameter for connection Reference standards

10 x 1.5 mm

EN 12975 IEC EN 61215 IEC EN 61730

ELECTRICAL PARAMETERS Peak output Pm

250 W

Tolerance

±2.5 %

MPP voltage Vm

30.03 V

MPP current Im

8.33 A

Open circuit voltage Voc

7.68 V

Short-circuit current Isc

8.81 A

Maximum system voltage

1000 VDC

Module efficiency

15.06 %

Maximum surface load

4500 N/m2

Insulation resistance

>100M

CERTIFICATIONS Module certificates: IEC 61215 ed.II Module certificates: IEC-EN 61730-1; IEC-EN 61730-2 Conforms to requirements of: V CONTO ENERGIA, Italian ministerial decree 05/07/2012, Art. 5 Sec. 2, MADE IN EU

CODE

PRODUCT

8FWI00250

C HYBRID Module - 250W el. - 1040W th.

www.md-zenit.si +386 31 608 388

PRICE (€) 845.00

www.md-zenit.si +386 31 608 388

INSTALLATION AND CONNECTION ACCESSORIES FOR FTH COLLECTORS AND HYBRID MODULE

FASTENING KITS FOR FTH AND HYBRID COLLECTORS

CODE

PRODUCT

8TTE00048

FTH installation base kit - bent tiles

80.00

8TTE00046

FTH-ECO installation base kit - bent tiles

78.00

8TTE00054

RTH DTH FTH triangle stand KIT 1

71.96

8TTE00056

KIT 2 Reinforced wind-proof steel cables

44.24

8TTE00060

KIT 2 Fx brackets to tiles

27.44

8TTE00062

KIT 2 Fx brackets to bent tiles

24.92

8TTE00064

KIT 2 long screws, L 300

19.04

8TTE00066

KIT 2 Fx brackets for slate/shingle roofs

24.64

8TTE00071

KIT 2 clamps for seamed corrugated metal roofs

45.24

8TTE00080

Base flashing kit

346.00

8TTE00082

Extension flashing kit

279.00

www.md-zenit.si +386 31 608 388

PRICE (€)

FITTINGS FOR FTH COLLECTORS

CODE

PRODUCT

8TKS00052

FTH fittings kit

21.38

8TKS00054

FTH 2.0 ECO fittings kit

21.38

8TKR00275

Flexible fitting 22x22

20.86

8TKR00273

Flexible fitting 18x18 - FTH 2.0 ECO

17.28

www.md-zenit.si +386 31 608 388

PRICE (€)

HOT WATER BOILERS

DHW BOILERS - 1 FIXED HEAT EXCHANGER Boilers for production of domestic hot water with fixed coil. Structure: • Construction material S235JR; • Internal vitrification per DIN 4753 p.3 • Max DHW Temperature 95°C • Max heat-exchanger temperature 110° C • External burnishing • External finish in grey sky Insulation: • For 150-500 litre models: external insulation with direct PU injection, thickness 50mm, minimum guaranteed density 40 kg/m³ • For 750-1000 litre models: external insulation in removable rigid PU sections, thickness 70mm, minimum guaranteed density 40 kg/m3 • For 1500, 2000, 2500 and 3000 litre models: 100mm soft, removable insulation, minimum guaranteed density 14 kg/m³. Insulation supplied fitted up to 1500 l model, supplied separately with larger sizes.

MODEL Effective storage capacity

litres

150

200

300

400

500

750

1000 1500 2000 2500 3000

150

200

300

400

500

750

1000

1500

2000

2500

3000

Diameter without insulation

500

600

650

790

1000

1100

1200

Diameter with insulation

610

710

760

950

1200

1300

1400

HT: total height LOWER heat exchange surface

995

1265

1710

1690

1780

1870

2120

2285

2550

2680

2980

0.6

1.1

1.5

1.8

2.0

2.5

4.2

4.5

4.8

5.2

Max DHW pressure

bar

Max. working temperature

°C

CODE

PRODUCT

8TBO00410

Vert. DHW boiler 1coil. fx 150 l - H

579.02

8TBO00412

Vert. DHW boiler 1coil. fx 200 l - H

678.60

8TBO00414

Vert. DHW boiler 1coil. fx 300 l - H

826.80

8TBO00416

Vert. DHW boiler 1coil. fx 400 l - H

996.58

8TBO00418

Vert. DHW boiler 1coil. fx 500 l - H

1,144.00

8TBO00420

Vert. DHW boiler 1coil. fx 750 l - H

1,510.60

8TBO00422

Vert. DHW boiler 1coil. fx 1000 l - H

1,723.80

8TBO00424

Vert. DHW boiler 1coil. fx 1500 l - H

3,541.85

8TBO00426

Vert. DHW boiler 1coil. fx 2000 l - H

3,989.05

8TBO00428

Vert. DHW boiler 1coil. fx 2500 l - H

4,877.60

8TBO00430

Vert. DHW boiler 1coil. fx 3000 l - H

5,764.20

www.md-zenit.si +386 31 608 388

PRICE (€)

DHW BOILERS - 2 FIXED COILS Boilers for production of domestic hot water with two fixed coils. Structure: • Construction material S235JR • Internal vitrification per DIN 4753 p.3 • Maximum DHW Temperature 95°C • Maximum heat-exchanger temperature 110° C • External burnishing • External finish in grey sky Insulation: • For 150-500 litre models: external insulation with direct PU injection, thickness 50mm, minimum guaranteed density 40 kg/m³ • For 750-1000 litre model: external insulation in removable rigid PU sections, thickness 70mm, minimum guaranteed density 40 kg/m3 • For models with 1500 litre, 2000 litre, 2500 litre and 3000 litre capacity, 100mm soft, removable insulation, minimum guaranteed density 14 kg/m³ Insulation supplied fitted up to 1500 litre model, supplied separately with larger sizes.

MODEL

200

300

400

500

750

1000

1500

2000

2500

3000

Effective storage capacity

litres

200

300

400

500

750

1000

1500

2000

2500

3000

Diameter without insulation

500

600

650

790

1000

1100

1200

Diameter with insulation

610

710

760

950

1200

1300

1400

HT: total height

1265

1710

1690

1780

1870

2120

2285

2550

2680

2980

0.8

0.9

2.4

2.5

3.5

3.8

0.8

1.5

1.9

2.4

2.5

4.2

4.5

4.8

5.2

Max DHW pressure

bar

Max. working temperature

°C

UPPER heat exchange surface LOWER heat exchange surface

CODE

PRODUCT

8TBO00440

Vert. DHW boiler 2coils fx 200 l - H

778.05

8TBO00442

Vert. DHW boiler 2coils fx 300 l - H

916.60

8TBO00444

Vert. DHW boiler 2coils fx 400 l - H

1,107.60

8TBO00446

Vert. DHW boiler 2coils fx 500 l - H

1,279.20

8TBO00448

Vert. DHW boiler 2coils fx 750 l - H

1,712.36

8TBO00450

Vert. DHW boiler 2coils fx 1000 l - H

1,805.57

8TBO00452

Vert. DHW boiler 2coils fx 1500 l - H

3,777.80

8TBO00454

Vert. DHW boiler 2coils fx 2000 l - H

4,404.40

8TBO00456

Vert. DHW boiler 2coils fx 2500 l - H

5,327.40

8TBO00458

Vert. DHW boiler 2coils fx 3000 l - H

6,245.20

www.md-zenit.si +386 31 608 388

PRICE (€)

HOT WATER BOILERS

DHW BOILERS - 2 PREASSEMBLED COILS Hot water tank for domestic hot water produced with a solar installation. Structure: • Construction material S235JR • Internal vitrification per DIN 4753 p.3 • Max DHW Temperature 95°C • Max heat-exchanger Temperature 110 °C • External burnishing Insulation: • Insulation obtained with direct injection of PU, thickness 50mm, minimum guaranteed density 40 kg/ m3 - External finish in RAL 9006 grey ABS. Accessories included: • Magnesium sacrificial anode • Temperature gauge • Solar pump unit installed on the tank, complete with wired control unit • Mains power supply cord (2 m) • Schuko plug • Wall-mount bracket for expansion tank • Metal expansion tank support strap • Screws and plugs for fixing • Shut-off valve for expansion tank • Flat gasket seals • Stainless-steel hose (1 m)

MODEL

200

300

400

500

Effective storage capacity

litres

200

300

400

500

Diameter without insulation

500

600

650

Diameter with insulation

610

710

760

HT: total height

1265

1710

1690

1780

0.8

0.9

0.8

1.5

1.9

Max DHW pressure

bar

Max. working temperature

°C

UPPER heat exchange surface LOWER heat exchange surface

CODE

PRODUCT

8TBO00460

Vert. DHW boiler 2coils fx 200 l - PREASSEMBLED H

1,432.00

8TBO00462

Vert. DHW boiler 2coils fx 300 l - PREASSEMBLED H

1,601.00

8TBO00464

Vert. DHW boiler 2coils fx 400 l - PREASSEMBLED H

1,768.00

8TBO00466

Vert. DHW boiler 2coils fx 500 l - PREASSEMBLED H

1,952.00

www.md-zenit.si +386 31 608 388

PRICE (€)

DHW STORAGE TANKS DHW storage tank for high temperatures, enamelled up to 3000 litres, treated with CERAMPLAST for greater capacities. •

High-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. CATHODIC PROTECTION: sacrificial magnesium anodes on threaded plug. INSULATION AND EXTERNAL FINISH: 50 mm flexible PU insulation sections, external finish in PVC with hinge and thermoformed cover.

• •

MODEL

500

800

1000

1500

2000

2500

3000

Effective storage capacity

litres

500

795

920

1435

1980

2605

2910

Diameter without insulation

650

800

950

1100

1250

Diameter with flexible insulation

750

900

1050

1200

1350

Total height

1710

1800

2050

2370

2420

2480

2730

Max. working pressure

bar

Max. working temperature

°C

100

110

Corrosion warranty

5 years

CODE

PRODUCT

8TBO00036

Vertical DHW boiler 500 litres

940.80

8TBO00037

Vertical DHW boiler 800 litres

1,459.20

8TBO00038

Vertical DHW boiler 1000 litres

1,760.64

8TBO00039

Vertical DHW boiler 1500 litres

2,471.04

8TBO00040

Vertical DHW boiler 2000 litres

2,812.80

8TBO00041

Vertical DHW boiler 2500 litres

3,321.60

8TBO00042

Vertical DHW boiler 3000 litres

3,724.80

www.md-zenit.si +386 31 608 388

PRICE (€)

HOT WATER BOILERS

DHW BOILERS - REMOVABLE COILS DHW storage with installation of one or more heat exchangers, possibility to alter the heat-exchanger surface area on the basis of the types of heat generators used, e.g. solar collectors, boilers, heat pumps, energy storage vessels etc. •

High-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. CATHODIC PROTECTION: sacrificial magnesium anodes on threaded plug. INSULATION AND EXTERNAL FINISH: 50 mm rigid PU insulation sections up to 1000 model and 100 mm flexible PU insulation for remaining models, external finish in PVC with hinge and thermoformed cover. 5-year warranty

• •

•

MODEL Effective storage capacity Number of flanges

1000

1500

2000

3000

litres

920

1435

1980

2910

no.

Diameter without insulation

800

950

1100

1250

Diameter with flexible insulation

1150

1300

1450

Diameter with rigid insulation

900

Total height

2050

2390

2430

2750

Max. working pressure

bar

Max. working temperature

°C

100

110

Heat exchanger max. working pressure

bar

CODE

PRODUCT

PRICE (€)

8TBO00030

Vert. DHW boiler 1000 l - for removable heat exchangers

1,599.85

8TBO00035

Vert. DHW boiler 1500 l - for removable heat exchangers

1,937.95

8TBO00032

Vert. DHW boiler 2000 l - for removable heat exchangers

2,315.25

8TBO00033

Vert. DHW boiler 3000 l - for removable heat exchangers

2,761.15

COPPER FIN HEAT EXCHANGERS * The power supplied by the heat exchangers refers to heating DHW from 15 to 45 °C

HEAT EXCHANGER SURFACE AREA (M2)

0.75

1.30

1.80

2.30

2.60

3.20

4.50

5.30

6.30

P1 (kW) (primary 60-50°C)*

6.2

9.4

12.8

15.2

19.6

22.5

30.1

37.4

45.0

P2 (kW) (primary 90-70°C)*

19.8

36.1

40.7

59.3

68.6

82.6

118.6

136.7

165.1

CODE

PRODUCT

8TBO00060

Copper fin heat exchanger - 0.75 m2

PRICE (€) 272.48

8TBO00062

Copper fin heat exchanger - 1.3 m

358.80

8TBO00064

Copper fin heat exchanger - 1.8 m2

429.00

8TBO00066

525.20

8TBO00068

Copper fin heat exchanger - 2.6 m

589.68

8TBO00070

Copper fin heat exchanger - 3.2 m2

700.96

8TBO00072

1,016.60

1,159.60

1,406.08

8TBO00074

Copper fin heat exchanger - 2.3 m

Copper fin heat exchanger - 4.5 m Copper fin heat exchanger - 5.3 m

8TBO00076

Copper fin heat exchanger - 6.3 m

8TBO00080

Blank flange, D300 mm, with seal

45.76

8TBO00082

Perforated flange with seal for heat exchangers

56.16

www.md-zenit.si +386 31 608 388

STORAGE TANKS

MULTIENERGY THERMAL INERTIAL STORAGE Storage/buffer for heating systems, highly insulated to avoid heat loss. Hatches allow different heat exchangers to be installed to take advantage of different energy sources (solar, high and low temperature, heat pumps, biomass generators, recovered energy) •

CONSTRUCTION: made from high-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. INSULATION Removable rigid PU insulation sections. EXTERNAL FINISH in embossed aluminium, front plate in painted steel and thermoformed cover. 5-year CORROSION WARRANTY CERTIFIED COMPLIANCE with directive 97/23/EC - Art. 3 Sec. 3

• • • •

MODEL

450

750

1250

2000

Effective capacity

litres

480

780

1260

1980

Diameter without insulation

650

790

950

1100

Diameter with insulation

820

960

1120

1270

Total height

1780

1850

2170

2455

Number of flanges Ø220×Ø300

no.

Product weight when empty (without heat exchangers)

140

180

275

300

Max. working pressure

bar

Test pressure

bar

Max. working temperature

°C

100

CODE

PRODUCT

8TBO00160

Thermal inertial storage hot water tank - 6 flanges - 450 Litre

PRICE (€) 1,568.00

8TBO00162

Thermal inertial storage hot water tank - 6 flanges - 750 Litre

2,067.80

8TBO00164

Thermal inertial storage hot water tank - 8 flanges - 1250 Litre

3,091.90

8TBO00166

Thermal inertial storage hot water tank - 8 flanges - 2000 Litre

3,483.90

CODE

PRODUCT

8TBO00060

Copper fin heat exchanger - 0.75 m2

PRICE (€) 272.48

358.80

8TBO00064

Copper fin heat exchanger - 1.8 m

429.00

8TBO00066

Copper fin heat exchanger - 2.3 m2

525.20

8TBO00068

589.68

8TBO00062

Copper fin heat exchanger - 1.3 m

Copper fin heat exchanger - 2.6 m

8TBO00070

Copper fin heat exchanger - 3.2 m

700.96

8TBO00072

Copper fin heat exchanger - 4.5 m2

1,016.60

8TBO00074

Copper fin heat exchanger - 5.3 m2

1,159.60

8TBO00076

Copper fin heat exchanger - 6.3 m

1,406.08

8TBO00080

Blank flange, D300 mm, with seal

45.76

8TBO00082

Perforated flange with seal for heat exchangers

56.16

www.md-zenit.si +386 31 608 388

STORAGE TANKS

COMBI - ECO THERMAL INERTIAL STORAGE Thermal inertial tanks with semi-fast domestic hot water production, manufactured in high-quality S235JR EN10025 steel using automatic welding procedures in a controlled atmosphere. •

• • •

MODEL

Fixed internal spiral coils (where fitted), made with highquality S235JR EN10025 steel oval-section tubes, vertical arrangement and large heat-exchanger area with a geometric layout which prevents the formation of legionella (for the lower coil). Production of DHW with AISI 316L corrugated steel tube. All welding procedures EN288 compliant, with EN287 certified workers. All product versions are leak pressure tested to 1.5 times their rated maximum working pressure.

300

500

800

1000

1250

1500

2000

Effective storage capacity

litres

330

530

840

970

1260

1440

1985

Diameter without insulation

600

650

790

950

1100

Diameter with insulation

700

750

990

1150

1300

HT: total height

1375

1740

1940

2180

2050

2270

2350

1.8

2.20

2.75

3.00

4.00

4.30

LOWER heat exchange surface

UPPER heat exchange surface

1.50

2.10

2.00

2.50

3.40

4.00

DHW stainless coil surface area

5.68

7.26

8.52

Max THERMAL INERTIAL TANK pressure

bar

Max DHW pressure

bar

Max coil pressure

bar

Max. working temperature

°C

100

Empty product weight - 3 coils

175

215

242

275

327

384

Empty product weight - 2 coils

135

156

194

212

240

293

340

CODE

PRODUCT

8TBO00105

Vert. combi boiler, stainless, 2coils fx 300 litres

1,832.60

8TBO00108

Vert. combi boiler, stainless, 2coils fx 500 litres

2,205.00

8TBO00111

Vert. combi boiler, stainless, 2coils fx 800 litres

2,464.70

8TBO00112

Vert. combi boiler, stainless, 2coils fx 1000 litres

2,758.70

8TBO00114

Vert. combi boiler, stainless, 2coils fx 1500 litres

3,332.00

8TBO00115

Vert. combi boiler, stainless, 2coils fx 2000 litres

4,030.25

8TBO00125

Vert. combi boiler, stainless, 3coils fx 500 litres

2,352.00

8TBO00131

Vert. combi boiler, stainless, 3coils fx 800 litres

2,643.55

8TBO00132

Vert. combi boiler, stainless, 3coils fx 1000 litres

2,812.60

8TBO00133

Vert. combi boiler, stainless, 3coils fx 1250 litres

3,234.00

8TBO00134

Vert. combi boiler, stainless, 3coils fx 1500 litres

3,550.05

8TBO00135

Vert. combi boiler, stainless, 3coils fx 2000 litres

4,348.75

www.md-zenit.si +386 31 608 388

PRICE (€)

COMBI - TANK IN TANK THERMAL INERTIAL STORAGE Thermal inertial storage-hot water production tank, composed of a unit which receives and distributes energy produced by traditional and alternative sources, directly or indirectly, via heat exchangers inside the inertial tank. The hot water required to supply the different types of thermal systems is taken from this tank: at high temperature if the water is taken from the upper part of the thermal inertial tank, at low temperature if the water is taken from the lower part. The DHW production/storage unit is installed inside the thermal inertial tank in this system. • • • • • • • •

MODEL

High-quality S235JR EN10025 sheet steel 3 Versions available: 0, 1 or 2 heat exchangers Fixed spiral heat exchangers with S235JR EN10025 steel tubes welded to the tank DHW production/storage unit in enamelled steel (EMAIL) INSULATION in rigid PU for 220-600 litre models and flexible PU for remaining models EXTERNAL FINISH in PVC with hinge and thermoformed cover CATHODIC PROTECTION with sacrificial magnesium anodes on threaded plug Internal vitrification for CORROSION PROOFING

600/180

800/180

800/300

1000/180

1000/300

Total thermal inertial tank capacity

litres

585

800

900

DHW capacity

litres

175

295

175

295

Diameter with insulation

855

955

995

HT: total height

1890

1930

2050

LOWER heat exchange surface

2.0

3.0

Max. DHW pressure

bar

Max. puffer pressure

bar

Max. working temperature

°C

100

Empty product weight - 0 coils

135

165

180

185

195

Empty product weight - 1 coil

165

190

205

210

220

Empty product weight - 2 coil

215

235

UPPER heat exchange surface

TECHNICAL DATA

Warranty

5-year corrosion warranty

CODE

PRODUCT

8TBO00140

Vert. combi boiler, TinT, 1coil fx 600/180 litres

1,560.00

8TBO00142

Vert. combi boiler, TinT, 1coil fx 800/180 litres

1,840.00

8TBO00143

Vert. combi boiler, TinT, 1coil fx 800/300 litres

2,000.00

8TBO00145

Vert. combi boiler, TinT, 1coil fx 1000/180 litres

1,970.00

8TBO00146

Vert. combi boiler, TinT, 1coil fx 1000/300 litres

2,130.00

8TBO00150

Vert. combi boiler, TinT, 2coils fx 600/100 litres

1,680.00

8TBO00152

Vert. combi boiler, TinT, 2coils fx 800/180 litres

2,080.00

8TBO00154

Vert. combi boiler, TinT, 2coils fx 1000/180 litres

2,310.00

www.md-zenit.si +386 31 608 388

PRICE (€)

STORAGE TANKS

COMBI - ECO THERMAL INERTIAL STORAGE Combi technique storage thermal inertial tank. Tank Structure. • • • • •

MODEL Effective storage capacity

litres

CONSTRUCTION: high-quality S235JR sheet steel DHW heat exchanger in AISI 316L - DN32 stainless RAL 7015 anti-corrosion external paint Assembled external insulation in 100mm soft PU, density 14 kg/m3 External finish in RAL9006 grey sky

500

800

1000

1500

2000

500

800

1000

1500

2000

Diameter without insulation

650

790

1000

1100

Diameter with insulation

850

990

1200

1300

HT: total height

1720

1910

2090

2220

2360

UPPER coil surface

LOWER coil surface

2.00

3.00

3.50

4.20

2.30

3.00

5.50

DHW stainless coil surface

5.64

Max THERMAL INERTIAL TANK pressure

bar

Max DHW pressure

bar

Max coil pressure

bar

Max. working temperature

°C

Dry weight

105

200

250

285

325

Sensor connections

1/2”

1/2

1/2”

DHW coil connections

1”

”1”

1”

Heating connections

1”1/2

Coil connections (solar + tank)

1”

CODE

PRODUCT

8TBO00470

Vert. stainless combi boiler 2coils fx 500 litres - H

1,697.85

8TBO00480

Vert. stainless combi boiler 3coils fx 800 litres - H

2,098.20

8TBO00482

Vert. stainless combi boiler 3coils fx 1000 litres - H

2,188.42

8TBO00484

Vert. stainless combi boiler 3coils fx 1500 litres - H

2,840.50

8TBO00486

Vert. stainless combi boiler 3coils fx 2000 litres - H

3,260.40

www.md-zenit.si +386 31 608 388

PRICE (€)

PUFFER AND PUFFER STORAGE THERMAL INERTIAL STORAGE Storage/buffer for heating systems, highly insulated to avoid heat loss. One or two fixed heat exchangers (depending on version) for systems with biomass generators, solar installations and integration with external sources. •

CONSTRUCTION: made from high-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. Fixed spiral heat exchangers (depending on model) with S235JR EN10025 steel tubes welded to the tank CORROSION TREATMENT: External rust-proof paint INSULATION Rigid PU for 200-500 litre models and flexible PU for remaining models EXTERNAL FINISH: PVC with hinge and thermoformed cover

• • • •

MODEL

200

300

500

800

1000

1500

2000

2500

3000

4000

5000

Effective storage capacity

litre

185

295

500

780

900

1435

1980

2605

2910

3710

4945

Diameter without insulation

450

550

650

790

950

1100

1250

1400

1600

Diameter with insulation

550

650

750

990

1150

1300

1450

1600

1800

HT: total height

1350

1400

1680

1740

2040

2350

2400

2450

2740

2840

2850

TECHNICAL DATA Max. working pressure

bar

Max. working temp.

°C

100

Prod. empty weight - 0 coil version

115

140

150

230

265

310

335

490

580

Prod. empty weight - 1 coil version

139

167

181

272

310

358

385

550

650

Prod. empty weight - 2 coil version

100

159

194

212

314

355

405

135

610

720

WARRANTY

5-year corrosion warranty

CERTIFIED

COMPLIANCE with directive 97/23/EC - Art. 3 - Sec. 3

CODE

PRODUCT

8TBO00210

Vert. puffer storage tank Fe 1coil fx 300 litres

747.25

8TBO00211

Vert. puffer storage tank Fe 1coil fx 500 litres

982.45

8TBO00214

Vert. puffer storage tank Fe 1coil fx 800 litres

1,118.18

8TBO00212

Vert. puffer storage tank Fe 1coil fx 1000 litres

1,288.70

8TBO00230

Vert. puffer storage tank 200 litres

573.30

8TBO00232

Vert. puffer storage tank 300 litres

694.58

8TBO00234

Vert. puffer storage tank 500 litres

870.98

8TBO00236

Vert. puffer storage tank 800 litres

992.25

8TBO00238

Vert. puffer storage tank 1000 litres

1,146.60

8TBO00240

Vert. puffer storage tank 1500 litres

1,609.65

8TBO00242

Vert. puffer storage tank 2000 litres

1,995.53

8TBO00244

Vert. puffer storage tank 2500 litres

2,259.02

8TBO00246

Vert. puffer storage tank 3000 litres

3,009.83

8TBO00248

Vert. puffer storage tank 4000 litres

3,969.00

8TBO00250

Vert. puffer storage tank 5000 litres

5,071.50

www.md-zenit.si +386 31 608 388

PRICE (€)

PREINSULATED STAINLESS-STEEL HOSES

CORRUGATED AND STRIPWOUND STAINLESS-STEEL HOSES Pre-insulated hoses in high-quality stainless steel, ensuring the best results for a pre-packaged solar system. • • • •

Ring stainless hose Quick installation High solar performance thanks to high level of insulation Available in 10 - 15 - 20 - 25 - 50 metre lengths

CODE

PRODUCT

8TKR00480

Double corrugated steel hose ECO DN 16mm / Insulation 20mm

PRICE (€/m) 25.22

Pre-insulated hoses in high-quality stainless steel, ensuring the best results for a pre-packaged solar system. • • • • • • • •

STRIPWOUND STAINLESS hose Less pressure loss More silent operation Better air expulsion Graphite seals Insulation resistant to 170°C Seals resistant to 450°C Available in 10 - 15 - 20 - 25 - 50 metre lengths

CODE

PRODUCT

8 TKR00510

Double SPIRALRHOR stripwound steel hose DN 15mm / Insulation 20mm

37.70

8TKR00511

Single SPIRALRHOR stripwound steel hose DN 15mm / Insulation 20mm

17.89

8TKR00512

Double SPIRALRHOR stripwound steel hose DN 20mm + 3rd HOSE / Insulation 20mm

41.08

8TKR00514

Double SPIRALRHOR stripwound steel hose DN 20mm / Insulation 20mm

42.90

8TKR00515

Single SPIRALRHOR stripwound steel hose DN 20mm / Insulation 20mm

29.90

8TKR00518

Double SPIRALRHOR stripwound steel hose DN 25mm / Insulation 20mm

51.32

8TKR00519

Single SPIRALRHOR stripwound steel hose DN 25mm / Insulation 20mm

40.95

8TKR00523

Single SPIRALRHOR stripwound steel hose DN 32mm / Insulation 20mm

43.16

www.md-zenit.si +386 31 608 388

PRICE (€/m)

FITTINGS

CODE

PRODUCT

8TKR00176

CORRUGATED fitting DN 16 x F 3/4”

14.45

8TKR00178

CORRUGATED fitting DN 16 x M 3/4”

11.48

CODE

PRODUCT

8TKR00180

SPIRALRHOR stripwound fitting DN 15 x F 3/4”

14.85

8TKR00181

SPIRALRHOR stripwound fitting DN 20 x F 3/4”

17.82

8TKR00182

SPIRALRHOR stripwound fitting DN 20 x F 1/2”

17.67

8TKR00186

SPIRALRHOR stripwound fitting DN 25 x F 3/4”

23.76

8TKR00200

SPIRALRHOR stripwound fitting DN 15 x M 3/4”

12.42

8TKR00202

SPIRALRHOR stripwound fitting DN 15 x M 1/2”

12.42

8TKR00206

SPIRALRHOR stripwound fitting DN 20 x M 3/4”

16.20

8TKR00210

SPIRALRHOR stripwound fitting DN 25 x M 1”

22.84

8TKR00214

SPIRALRHOR stripwound fitting DN 32 x M 1 1/4”

35.80

8TKR00232

SPIRALRHOR stripwound reduction DN 25 x DN 20

51.84

8TKR00236

SPIRALRHOR stripwound reduction DN 32 x DN 25

81.16

8TKR00240

Spiralrohr DN 15 union

17.67

8TKR00241

Spiralrohr DN 20 union

24.80

8TKR00252

TEE fitting DN 15 - SPIRALRHOR

30.92

8TKR00256

TEE fitting DN 20 - SPIRALRHOR

47.66

8TKR00260

TEE fitting DN 25 - SPIRALRHOR

71.44

8TKR00262

TEE fitting DN 32 - SPIRALRHOR

95.34

www.md-zenit.si +386 31 608 388

PRICE (€)

SOLAR STATIONS

THERMICS 2-WAY SOLAR STATION - DN 20 Pre-assembled and insulated two-way solar station for flow regulation in forced-circulation solar systems, resistant to high temperatures and pressures, with the following technical specifications: • Size DN 20 – 3/4” • Brass valves and unions • Klingersil / EPDM seals • EPP insulation • Maximum pressure 6 bar • Max. temperature 120 °C, 160 °C for short periods Supplied with: • De-aerator • Flow meter 2-12 lpm • Safety valve 6 bar • Temperature gauges 0-160 °C for solar circuit

CODE

PRODUCT

8TSO00020

One-way solar station

PRICE (€) 305.20

8TSO00023

Two-way forced circulation unit

415.18

TWO-WAY SOLAR UNIT - DN25 Regulation unit for solar installations complete with flow regulator, adjustable from 5-40 lpm, 3-speed circulator, ball valve on system return with temperature gauge and check valve, safety device with 0-10 bar pressure gauge and safety valve calibrated to 6 bar, ball valve on system flow with temperature gauge and delivery tube with incorporated de-aerator. The unit includes black EPP insulation, density 40 g/l. • • • • • • • • • • • • •

CODE

PRODUCT

8TSO00454

Solar unit, 2-way, DN 25 5-40 lpm 25/7-3

Maximum working temperature 120 °C Maximum working pressure 8 bar. Return valve aperture: 450 mm H2O Nominal diameter: DN 25 - 1” Max temperature: 120 °C Ball valve material: OT 58 Check valve material: OT Insulation material: Black EPP, 40 g/l Seal material: Viton-Centellen Connections: 1” F Centre distance: 90 mm Unit height: 440 mm Insulation dimensions: 500x260x180 mm

www.md-zenit.si +386 31 608 388

PRICE (€) 456.72

2-WAY SOLAR UNIT—DN32 Regulation unit for solar installations complete with flow regulator, adjustable from 20-70 lpm, 3-speed circulator, ball valve on system return with temperature gauge and check valve, safety device with 0-10 bar pressure gauge and safety valve calibrated to 6 bar, ball valve and check valve on system flow with temperature gauge and delivery tube. The unit includes black EPP insulation, density 40 g/l. • • • • • • • • • • • • • •

Maximum working temperature 120 °C Maximum working pressure 8 bar Return valve aperture: 450 mm H2O Nominal diameter: DN 32 - 1”1/4 Max. pressure 8 bar Max temperature: 120 °C Ball valve material: OT 58 Check valve material: NORYL Insulation material: Black EPP, 40 g/l Seal material: Viton-Centellen Connections: 1 1/4” F Centre distance: 90 mm Unit height: 640 mm Insulation dimensions: 260x500x180 mm

CODE

PRODUCT

8TSO00470

Solar unit, 2-way, DN 32 20-70 lpm - Wilo Star RS 30/8-3

8TSO00472

Solar unit, 2-way, DN 32 20-70 lpm - Wilo TOP-S 30/10

1,391.00

8TSO00474

Solar unit, 2-way, DN 32 20-70 lpm - Grundfos UPS 32-80

1,047.80

www.md-zenit.si +386 31 608 388

PRICE (€) 986.91

SOLAR STATIONS

DHW HEAT-EXCHANGER MODULES - WITH CONTROL UNIT < 20M2 Domestic hot water production module with AISI 316 braze-welded heat exchanger (insulated) complete with electronic control unit including 1 PT1000 sensor. Primary side intake (solar flow) with DN20 ball valve with red handle, ½” charge-discharge cocks, flow regulator adjustable from 2-12 lpm, 3-speed solar circulator, primary side outlet (solar return) with DN20 valve with blue handle, check valve, ½” charge-discharge cock, 6 bar solar safety valve. Secondary side intake (DHW intake) with DN20 ball valve with blue handle, 6 bar DHW circuit safety valve, DHW circulator, 1/4” air bleed valve, VFS 2-40 lpm flow meter and temperature gauge, 1/4” air bleed valve, sensor sump, check valve, secondary side outlet (DHW outlet) with DN20 ball valve with red handle. The module includes black EPP insulation, density 40 g/l.

PRIMARY CIRCUIT • Max pressure: 8 bar • Solar safety valve: 6 bar • Max temperature: 120 °C • Pressure gauge: 0-10 bar • Check valve: 0.45 MWC • Circulator: WILO ST 15/7 ECO 54 W • Ball valve material OT58 • Flow regulator 2-12 lpm

SECONDARY CIRCUIT • Max pressure: 6 bar • DHW safety valve: 6 bar • Max temperature: 120 °C • Check valve: 0.2 m. WC • Circulator: Wilo ZRS 15/4-3 • Flow meter: VFS 2-40 lpm • Heat exchanger: AISI 316 • Electronic regulator: TDC4

CODE

PRODUCT

8TSO00486

Solar Unit SC-ACS1-DN20 1-12 lpm - Wilo ST15/7

1,929.20

8TSO00488

Solar Unit SC-ACS2-DN20 1-12 lpm - Wilo ST15/7

2,033.20

www.md-zenit.si +386 31 608 388

PRICE (€)

DHW HEAT-EXCHANGER MODULES - WITH CONTROL UNIT < 50M2 Domestic hot water production module with AISI 316 braze-welded heat exchanger (insulated), 40-plate (high flow) or 50-plate (low flow), complete with electronic control unit including 4 PT1000 sensors. Primary side intake (solar flow) with 1” ball valve with red handle in Fe, ½” charge-discharge cocks, flow regulator adjustable from 10-40 lpm, modulating solar circulator, primary side outlet (solar return) with 1” ball valve with blue handle and temperature gauge, check valve, ½” chargedischarge cock, expansion vessel connection pipe with 0-10 bar pressure gauge and 6 bar solar safety valve. Secondary side intake (DHW intake) with 1” ball valve with blue handle and temperature gauge, 6 bar DHW circuit safety valve, DHW circulator, 1/4” air bleed valve, VFS 5-100 lpm flow meter and temperature gauge, 1/4” air bleed valve, sensor sump, check valve, motorised diverter valve, 1/4” automatic air bleed valve, secondary side outlet (DHW outlet) with 2 x 1” ball valves with red handle in Fe. The module includes black EPP insulation, density 40 g/l.

PRIMARY CIRCUIT • Max pressure: 8 bar • Solar safety valve: 6 bar • Max temperature: 120 °C • Pressure gauge: 0-10 bar • Check valve: 0.45 MWC • Circulator: WILO Stratos Para 25/1-11 - 180 W • Ball valve material OT58 • Flow regulator 10-40 lpm

SECONDARY CIRCUIT • Max pressure: 6 bar • DHW safety valve: 6 bar • Max temperature: 120 °C • Check valve: 0.2 m. WC • Circulator: Wilo Star RS 25/7-3 • Flow meter: VFS 5-100 lpm • Heat exchanger: AISI 316 • Electronic regulator: TDC4

CODE

PRODUCT

8TSO00496

Solar unit SC-ACS1-DN25 10-40 lpm - WILO Stratos Para 25/1-11

3,528.20

8TSO00498

Solar unit SC-ACS2-DN25 10-40 lpm - WILO Stratos Para 25/1-11

3,749.20

www.md-zenit.si +386 31 608 388

PRICE (€)

SOLAR STATIONS

SOLAR HEAT EXCHANGER MODULES TO PUFFER < 20M2 Solar separation module with AISI 316 braze-welded heat exchanger (insulated) complete with electronic control unit including 1 PT1000 sensor. Primary side intake (solar flow) with DN20 ball valve with red handle, ½” charge-discharge cocks, flow regulator adjustable from 2-12 lpm, 3-speed solar circulator, primary side outlet (solar return) with DN20 valve with blue handle, check valve, ½” charge-discharge cock, 6 bar solar safety valve. Secondary side intake with DN20 ball valve with blue handle, 3 bar hot water circuit safety valve, circulator, 1/4” air bleed valve, VFS 2-40 lpm flow meter and temperature gauge, 1/4” air bleed valve, sensor sump, check valve, secondary side outlet (puffer outlet) motorised diverter valve with 2 x DN20 ball valves with red handle. The module includes black EPP insulation, density 40 g/l. PRIMARY CIRCUIT • Max pressure: 8 bar • Solar safety valve: 6 bar • Max temperature: 120 °C • Pressure gauge: 0-10 bar • Check valve: 0.45 MWC • Circulator: WILO ST 15/7 ECO 54 W • Ball valve material OT58 • Flow regulator 2-12 Litres/min SECONDARY CIRCUIT • Max pressure: 6 bar • Safety valve: 3 bar • Max temperature: 120 °C • Check valve: 0.2 m. WC • Circulator: Wilo Star RS 15/6-3 • Flow meter: VFS 2-40 Litres/min • Heat exchanger: AISI 316 • Electronic regulator: TDC4

CODE

PRODUCT

8TSO00480

Solar Unit SC-R1-DN20 1-12 lpm - Wilo ST15/7

1,929.20

8TSO00482

Solar Unit SC-R2-DN20 1-12 lpm - Wilo ST15/7

2,033.20

www.md-zenit.si +386 31 608 388

PRICE (€)

SOLAR HEAT EXCHANGER MODULES TO PUFFER < 50M2 Domestic hot water production module with AISI 316 braze-welded heat exchanger (insulated), 40-plate (high flow) or 50-plate (low flow), complete with electronic control unit including 4 PT1000 sensors. Primary side intake (solar flow) with 1” ball valve with red handle in Fe, ½” charge-discharge cocks, flow regulator adjustable from 10-40 lpm, modulating solar circulator, primary side outlet (solar return) with 1” ball valve with blue handle and temperature gauge, check valve, ½” chargedischarge cock, expansion vessel connection pipe with 0-10 bar pressure gauge and 6 bar solar safety valve. Secondary side intake (DHW intake) with 1” ball valve with blue handle and temperature gauge, 6 bar DHW circuit safety valve, DHW circulator, 1/4” air bleed valve, VFS 5-100 lpm flow meter and temperature gauge, 1/4” air bleed valve, sensor sump, check valve, motorised diverter valve, 1/4” automatic air bleed valve, secondary side outlet (DHW outlet) with 2 x 1” ball valves with red handle in Fe. The module includes black EPP insulation, density 40 g/l.

PRIMARY CIRCUIT • Max. pressure: 8 bar • Solar safety valve: 6 bar • Max temperature: 120 °C • Pressure gauge: 0-10 bar • Check valve: 0.45 MWC • Circulator: WILO Stratos Para 25/1-11 - 180 W • Ball valve material OT58 • Flow regulator 10-40 Litres/min

SECONDARY CIRCUIT • Max. pressure: 6 bar • DHW safety valve: 6 bar • Max temperature: 120 °C • Check valve: 0.2 m. WC • Circulator: Wilo Star RS 25/7-3 • Flow meter: VFS 5-100 Litres/min • Heat exchanger: AISI 316 • Electronic regulator: TDC4

CODE

PRODUCT

8TSO00490

Solar unit SC-R1-DN25 10-40 lpm - WILO Stratos Para 25/1-11

3,372.20

8TSO00492

Solar unit SC-R2-DN25 10-40 lpm - WILO Stratos Para 25/1-11

3,582.80

www.md-zenit.si +386 31 608 388

PRICE (€)

SOLAR STATIONS

SOLAR HEAT EXCHANGER MODULES TO PUFFER < 290 M2 - LARGE INSTALLATIONS HEAT-EXCHANGER SOLAR STATION - LARGE INSTALLATIONS Pre-assembled thermal solar station suitable for transferring the thermal energy from a large thermal solar installation to a hot water thermal storage system. The station is modular and fully assembled. It can be composed of 2 (140 m2) or 3 (210 m2) exchanger modules in parallel. • Excellent performance, providing minimum heat loss between the solar field and storage temperature. • Minimal installation work required • Heat meter included • Can also be combined with existing hot water thermal storage systems • Monitoring system Technical specifications • Braze welded stainless-steel plate heat exchanger. Oversized surfaces to optimise the efficiency of the solar field and maximise the energy transferred • Module connections in cascade, 1” F fittings • Fittings and piping in brass or steel, supplied fully fitted and sealed • Wall mounting bracket for modules included • Full passage ball valve • Check valve incorporated in the ball valves to avoid unwanted circulation • In-line de-aerator included in primary flow line for permanent bleed of the solar fluid in the thermal unit • Modulated flow Wilo Stratos pump with 0-10V signal • Primary- and secondary-side flow meters for complete control of energy produced • System charging unit to allow loading of primary and secondary circuit • Solar safety unit with valve calibrated to 6 bar • Secondary-side safety unit with safety valve calibrated to 3 bar • Insulation to contain heat loss, designed to allow effective cooling of the pumps

CODE

PRODUCT

8TSO00012

SOLEX II heat-exchanger module - 140m2

8TSO00013

PRICE (€) 2

SOLEX III heat-exchanger module - 210m

www.md-zenit.si +386 31 608 388

13,570.74 19,926.00

DRAIN BACK SOLAR STATIONS DRAINBACK SOLAR STATION—DN20 Pre-assembled solar station suitable for actuation and control of drainback thermal solar systems. Works with normal water, providing the following advantages: • Better heat transfer • Better heat capacity • Reduced viscosity • Lower pressure loss • Reduced maintenance requirements • More ecological The Thermics drainback system is nevertheless a closed system, so it is not necessary to reintegrate the transfer fluid and there are no issues with corrosion. System composition: • Solar control unit using the best safety and performance logic • Temperature sensors • Pre-installed and pre-wired pump • Incorporated tank for collecting the transfer fluid when the pump stops • Flow volume meter • Pressure gauge • Insulation

CODE

PRODUCT

PRICE (€)

8TSO00042

Drainback solar module DN20

1,290.60

CODE

PRODUCT

8TSO00043

Expansion tank

www.md-zenit.si +386 31 608 388

PRICE (€) 641.00

INSTANTANEOUS DHW MODULES

INSTANTANEOUS DHW PRODUCTION MODULES Instantaneous domestic hot water production module (20 lpm) with 30-plate braze-welded AISI 316 heat exchanger. Primary side inlet with 3/4” ball valve with red handle, check valve, thermostatic mixing valve with temperature sensitive bulb on outlet for DHW temperature calibration, 3-speed circulator and 3/4” ball valve with blue handle on primary outlet. Secondary side DHW inlet with 3/4” ball valve with blue handle, ½” charge/discharge valve, flow meter, check valve, 3/4” ball valve with red handle on secondary side outlet. Galvanised sheet-metal frame with internal insulation. Max. working temperature 90 °C. Max. working pressure 6 bar. • Primary outlet maximum flow rate: 1,200 lph • Secondary outlet (DHW) maximum flow rate: 1,800 lph ΔP 0.5 bar • DHW temperature setpoint: 45-55 °C • Max. working pressure: 6 bar • Electrical power supply - electrical specifications: 230 V AC, 93 W • Minimum flow rate DHW production / ON: 2.5±0.3 lpm • Minimum flow rate DHW intervention / OFF: 2.5±0.3 lpm

from storage

To storage DHW outlet

Primary flow temp. (°C)

DHW setpoint

DHW production (Litres/min)

Power (kW)

Primary return temp. (°C)

45 (dt 35) 50 (dt 40) 55 (dt 45)

11.5 -

28 -

29.5 -

45 (dt 35) 50 (dt 40) 55 (dt 45)

14.5 9.5 -

35.5 28 -

29 35 -

45 (dt 35) 50 (dt 40) 55 (dt 45)

18 13.5 9

43.5 37.5 20.5

28 32 27

45 (dt 35) 50 (dt 40) 55 (dt 45)

24 20 16

58 55.5 50

27 29 33

45 (dt 35) 50 (dt 40) 55 (dt 45)

30 25 21

72.5 69 67

26 28.5 31

Cold water inlet

CODE

PRODUCT

PRICE (€)

8TSO00050

DHW production module 20 - ECO

1,033.98

Instantaneous domestic hot water production module via heat exchanger (AISI 316). Primary side inlet with 1” ball valve with handle and temperature gauge, thermostatic mixing valve with temperature sensitive bulb on outlet for DHW temperature calibration, 3-speed circulator, check valve, 1” ball valve with handle and pressure gauge on primary outlet. Secondary side cold water intake for DHW with DN 20 ball valve with handle and temperature gauge, differential pressure gauge, DN 20 ball valve with knob and temperature gauge on DHW outlet. Galvanised sheet-metal frame with internal insulation. Max. working temperature 90 °C. Max. working pressure 6 bar. • Primary outlet maximum flow rate: 1,620 lph • Secondary outlet (DHW) maximum flow rate: 1,800 lph ΔP 0.5 bar • DHW temperature setpoint: 45-50 °C • Max. working pressure: 6 bar • Electrical power supply - electrical specifications: 230 V AC, 132 W • Minimum flow rate DHW production / ON: 2.5 lpm • Minimum flow rate DHW intervention / OFF: 2.5 lpm Primary flow temp. (°C)

DHW setpoint

DHW production (Litres/min)

Power (kW)

Primary return temp. (°C)

45 (dt 35) 50 (dt 40)

20.76 -

50.44 -

230 -

45 (dt 35) 50 (dt 40)

32.28 25.55

78.41 70.87

358 283

45 (dt 35) 50 (dt 40)

40.66 34.90

98.76 96.88

451 387

45 (dt 35) 50 (dt 40)

49.7 42.93

120.9 119.1

551 476

CODE

PRODUCT

8TSO00053

DHW production module 35 - ECO

www.md-zenit.si +386 31 608 388

PRICE (€) 1,260.00

Instantaneous domestic hot water production module (40 lpm) with electronic control unit regulator and insulated braze-welded AISI 316 heat exchanger. Primary side inlet with ¾” ball valve with temperature gauge and red handle, 3-speed circulator, check valve, 1/4” automatic air bleed valve, ¾” ball valve with temperature gauge and blue handle on primary side outlet. Cold water intake for DHW with ¾” ball valve with blue key, 6 bar safety valve, ½” charge/discharge valve, VFS 2-40 lpm flow meter and temperature gauge, ¾” ball valve with red key on secondary outlet. DHW recirculation kit, composed of: circulator, ¾” ball valve with red handle, check valve, PT1000 sensor, copper piping kit. The module includes black EPP insulation, density 40 g/l. Max. working temperature 90 °C • • • • • • • • • • • •

Max. working pressure 6 bar. Primary outlet maximum flow rate: 1,650 lph (2nd speed) Secondary outlet (DHW) maximum flow rate: 2,400 lph ΔP 0.8 bar DHW temperature setpoint: 45-55 °C Max. working pressure: 6 bar Electrical power supply - electrical specifications: 230 V AC, 90 W Minimum flow rate DHW production / ON: 2 lpm Minimum flow rate DHW intervention / OFF: 2 lpm Secondary side flow meter and temperature gauge: VFS 2-40 lpm Plate heat exchanger surface area: 1.76 m² Max. dimensions (WxHxD): 475x835x226 mm Insulation material: Black EPP, 40 g/l DHW recirculation kit circulator: Wilo ZRS 15/4-3 - 39 W

CODE

PRODUCT

8TSO00054

DHW production module 40 - IE

www.md-zenit.si +386 31 608 388

PRICE (€) 2,019.15

INSTANTANEOUS DHW MODULES

INSTANTANEOUS DHW PRODUCTION MODULES

PRIMARY CIRCUIT • Three-way mixing valve: stabilises the intake temperature (ideal for the Summer, where the system is integrated with solar panels) • 2 x modulating circulators, 0-10 V in parallel • Alarm system with light/buzzer - in the event of a malfunction in one of the two circuits, a simple function allows it to operate in a reduced mode (60%) • Diverter valve on return: works on storage 1 or 2 return or on low/medium storage connections. SECONDARY (DHW) CIRCUIT • Electronic flow meter for the water temperature and volume control system, possibility to measure thermal energy used for DHW production, and view graphs of DHW and recirculation running time via the control unit. • Recirculation pump: controlled by the regulation control unit on the basis of the temperature setpoint and time CONTROL UNIT • Recirculation function programmable for time bands • Anti-legionella function • DHW and recirculation consumption figures display • Energy meter display

CODE

PRODUCT

8TSO00056

DHW production module 60 - IE

CODE

PRODUCT

8TSO00057

DHW production module 80 - IE

CODE

PRODUCT

PRICE (€)

8TSO00058

DHW production module 100 - IE

10,835.00

CODE

PRODUCT

PRICE (€)

8TSO00060

DHW production module 150 - IE

12,000.00

www.md-zenit.si +386 31 608 388

PRICE (€) 6,977.50

PRICE (€) 8,315.00

FLOW UNITS

HEATING UNITS - HIGH T DN 20 High-temperature unit for heating systems, complete with 3-speed circulator, 2 ball valves on system flow and return, complete with temperature gauge, check valve installed on a stub pipe on system return. The unit includes black EPP insulation, density 40 g/l. • Maximum working temperature 120 °C • Maximum working pressure 8 bar

CODE

PRODUCT

8TSO00540

Two-way heating unit - DN20 - Wilo RS 15/6-3

PRICE (€) 266.66

DN 25 High-temperature unit for heating systems complete with 3-speed circulator, ball valve with temperature gauge on system flow and return, spacer union with check valve, ball valve on system flow upline of the circulator. The unit includes black EPP insulation, density 40 g/l. • Maximum working temperature 120 °C • Maximum working pressure 8 bar

CODE

PRODUCT

PRICE (€)

8TSO00555

Two-way heating unit - DN25 - Wilo STRATOS PARA 25/1-7

563.00

DN 32 High-temperature unit for heating systems complete with 3-speed circulator, ball valve with temperature gauge on system flow and return, spacer union with check valve. The unit includes black EPP insulation, density 40 g/l. • Maximum working temperature 120 °C • Maximum working pressure 8 bar

CODE

PRODUCT

8TSO00565

Two-way heating unit - DN32 - Wilo STRATOS PARA 30/1-11

www.md-zenit.si +386 31 608 388

PRICE (€) 1,212.02

CONTROL SYSTEMS

CODE

PRODUCT

8TSO00115

DeltaSol M solar control unit - 2xFKP6 4xFRP6

PRICE (€) 840.00

• Intuitive menu and display of operational status • High-contrast display • 14 relay outputs • 12 inputs for Pt1000, Pt500 or KTY temperature sensors • Possibility to connect up to 5 expansion modules via the rESoL VBus® (45 sensors and 39 relays in total) • 2 inputs for Grundfos Direct Sensors™ digital and analogue sensors • Data logging, backups and firmware updates with an SD card • Drainback option

8TSO00116

Easy BS 4 digital solar control unit for small installations - complete with sensors

191.52

• 3 base systems to choose from (only with DeltaSol® BS/4) • Drainback option • Thermal balance • Tube collector function, thermal disinfection • Commissioning menu • Switch between °C and °F • High-efficiency pump control via adaptor

8TSO00118

DeltaSol BS Plus digital solar control unit complete with sensors

252.00

• Choice of 10 base systems • Thermal balance (on basis of system) • Operational control • Optional thermostat function (time adjustable), thermal disinfection, drainback option • Commissioning menu • Switch between °C and °F • High-efficiency pump control via adaptor

8TSO00112

Deltasol BX 5probe digital solar control unit 4relay SD VFS • 4 relay outputs/5 sensor inputs • RESOL VBus® • Extra large display • Thermal disinfection function • Removal of excess heat • Free ΔT function • Timer thermostat function • Energy saving power supply

www.md-zenit.si +386 31 608 388

351.90

CODE

PRODUCT

8TSO00130

DL2 Solar Datalogger

PRICE (€) 470.00

• System status display • Efficiency control • Fault detection • Access to system data via Internet with VBus.net - without complicated router configurations. • Export function for further data analysis using a spreadsheet • Direct connection to computer or router for remote query

8TSO00150

WMZ solar calorimeter - 2500 lph

796.32

8TSO00300

Control and automatic filling kit natural circulation

110.00

ACCESSORIES FOR HEAT METERS AND CONTROL UNITS

CODE

PRODUCT

8TSO00132

Solar Datalogger DL3 - 6 systems

1,080.00

8TSO00160

Impulse slow meter V40-25 DN20

260.40

8TSO00172

Grundfos Direct Sensor RPS 0-10 bar

www.md-zenit.si +386 31 608 388

PRICE (€)

71.40

HEAT EXCHANGERS

HEAT EXCHANGERS FOR SWIMMING POOLS TUBE BUNDLE HEAT EXCHANGERS FOR SWIMMING POOLS • •

• • •

• •

CODE 8TSA00020

Available in cupronickel, titanium and stainless steel Rapid transfer to swimming pool up to 1050 kW, for efficient use of energy and therefore maximum savings Integrated 7 mm pockets for thermostats (on most models), to facilitate installation The tube bundle is removable for easy maintenance of the unit Solvent welded end caps which insert directly into the pool piping on 5113 and 5114 series heat exchanger models The units are also ideal for cooling pools in hotter climates using a refrigeration unit Titanium parts in contact with swimming pool water have a 10-year anti-corrosion warranty

PRODUCT Heat exchanger Tube bundle for swimming pool - 80 m

PRICE (€) 3

736.95

8TSA00025

Heat exchanger Tube bundle for swimming pool - 130 m

761.18

8TSA00029

Heat exchanger Tube bundle for swimming pool - 170 m3

1,165.35

8TSA00035

Heat exchanger Tube bundle for swimming pool - 240 m3

1,844.93

www.md-zenit.si +386 31 608 388

INSPECTABLE PLATE HEAT EXCHANGERS PH2HEAT EXCHANGERS PH series inspectable plate heat exchangers provide the highest level of heat transfer efficiency. They are composed of AISI 316 stainlesssteel plates, all fitted with EPDM rubber gaskets and locked by galvanised steel tie rods, AISI 304 stainless-steel gates, with painted carbon-steel frame. Surface area in cm2

Plate thickness

Frame weight

Nominal pressure

Connection

340

0.6mm

320 g

22 kg

10 bar

1’’ 1/4

340

0.6mm

320 g

27 kg

16 bar

1’’ 1/4

S (mm)

Calculation, configuration and price on request

Plate weight

H (mm)

L (mm)

D (mm)

C (mm)

A (x no. plates)

480

180

370

3.1

480

180

370

3.1

PH3 HEAT EXCHANGERS PH series inspectable plate heat exchangers provide the highest level of heat transfer efficiency. They are composed of AISI 316 stainless-steel plates, all fitted with EPDM rubber gaskets and locked by galvanised steel tie rods, AISI 304 stainless-steel gates, with painted carbon-steel frame. Surface area in cm2

Plate weight

Frame weight

Nominal pressure

Connection

1300

0.6mm

950 gr

103 kg

10 bar

2’’

1300

0.6mm

950 gr

124 kg

16 bar

2’’

S (mm)

Calculation, configuration and price on request

Plate thickness

H (mm)

L (mm)

D (mm)

C (mm)

A (x no. plates)

750

350

605

145

3.5

750

350

605

145

3.5

PH4 HEAT EXCHANGERS PH series inspectable plate heat exchangers provide the highest level of heat transfer efficiency. They are composed of AISI 316 stainless-steel plates, all fitted with EPDM rubber gaskets and locked by galvanised steel tie rods, AISI 304 stainless-steel gates, with painted carbon-steel frame. Surface area (cm2) 2200

S (mm)

Calculation, configuration and price on request

Plate thickness 0.6mm

H (mm)

Plate weight

Frame weight

1400 gr

320 kg

L (mm)

D (mm)

Nominal pressure 10 bar

C (mm)

Connection Flat flange UNI 227867 PN16 DN100 (4’’ pipe) A (x no. plates)

1015

490

730

230

2.9

750

350

605

145

3.5

www.md-zenit.si +386 31 608 388

FLUIDS AND VALVES

ANTIFREEZE LIQUIDS AND CLEANING FLUIDS ANTIFREEZE THERMAL TRANSFER FLUIDS High-performance non-toxic propylene glycol based antifreeze liquid. Free of nitrates, amines and phosphates, silicates and borates, the liquid is combined with a protective combination of inhibitors to stop the formation of rust and corrosion of all materials present in a system such as steel, copper, aluminium and seals. It is ideal for protecting thermal solar, geothermal, lowand high-temperature heating, cooling and heat pump systems from freezing. Available in 15, 20 and 25 kg jerrycans.

CODE

PRODUCT

PRICE (€/KG)

8TFU00011

Premixed diathermic fluid L -10° C CF

3.08

8TFU00014

Premixed diathermic fluid L -20° C CF

4.07

8TFU00018

Premixed diathermic fluid L -28° C CF

4.62

8TFU00210

CF CONCENTRATED diathermic fluid

8.01

8TFU00310

Deionised water

0.42

8TFU00208

Concentrated propylene glycol antifreeze for natural circulation systems

4.62

CODE

PRODUCT

8TFU00030

Premixed diathermic fluid HYBRID

PRICE (€/KG) 5.46

SOLAR PANEL CLEANER Basic in pH, the formula includes specific dispersants developed to eliminate deposits, sediments and organic sludge which can form in solar systems. This product restores optimum working conditions to the system, prolonging its life as well as significantly reducing maintenance or repair costs. Available in 5 kg jerrycans.

CODE

PRODUCT

8TFU00220

MySOLAR concentrated cleaning acid

www.md-zenit.si +386 31 608 388

PRICE (€/KG) 40.04

MIXING/DIVERTER VALVES MIXING VALVES Thermostatic mixing valve keeps the temperature of the mixed water sent to the user constant at the set temperature when temperature and pressure of the hot and cold water supplied or flow rate drawn change. Also available in “scald-proof” version: hot water flow is inhibited in the event that the inlet cold water is not available.

CODE

PRODUCT

8TKR00030

1/2” solar thermostatic mixing valve

PRICE (€) 64.40

8TKR00031

3/4” solar thermostatic mixing valve

54.60

8TKR00032

1/2” solar thermostatic mixing valve - anti-scald

83.72

8TKR00033

3/4” solar thermostatic mixing valve - anti-scald

76.44

DIVERTER VALVE Motorised diverter valve for automatically diverting heat transfer fluid in climate control and plumbing systems. Suitable for heating systems and domestic hot water production. Main features: • No drawing • Short actuation times (valve opening-closing), available in 10-second and 40-second actuation time versions. • Able to operate with high differential pressures • Low pressure losses • Can be combined with any type of 3-contact command for complete control of the opening and closing phase, given the electrical construction characteristics.

CODE

PRODUCT

8TKR00050

Three-way diverter valve body

8TKR00051

Motorised 3-way diverter ball valve 3/4”

8TKR00071

Analogue flow meter, 1-13 lpm, DN20

84.00

8TKR00072

Analogue flow meter, 8-30 lpm, DN25

98.00

www.md-zenit.si +386 31 608 388

PRICE (€) 55.16 176.40

EXPANSION VESSELS

EXPANSION VESSELS SOLAR VESSEL • Interchangeable membrane, resistant to peaks of 130° for short periods • Screw-down stainless-steel flange • 2.5 bar precharge • Maximum pressure 10 bar

CODE

PRODUCT

8TVE00010

SOL expansion vessel, 10bar, 25 litres

PRICE (€) 52.29

8TVE00011

SOL expansion vessel, 10bar, 40 litres

84.00

8TVE00012

SOL expansion vessel, 10bar, 50 litres

116.76

8TVE00013

SOL expansion vessel, 10bar, 80 litres

184.80

8TVE00014

SOL expansion vessel, 10bar, 100 litres

259.35

8TVE00015

SOL expansion vessel, 10bar, 150 litres

338.10

8TVE00016

SOL expansion vessel, 10bar, 200 litres

441.00

DHW VESSEL • Food-safe interchangeable membrane (50-litre model), resistant to 99°C • Screw-down stainless-steel flange • 2.5 bar precharge • Maximum pressure 10 bar

CODE

PRODUCT

8TVE00050

DHW expansion vessel, 5 litres

PRICE (€) 31.08

8TVE00051

DHW expansion vessel, litres

33.60

8TVE00052

DHW expansion vessel, 12 litres

41.58

8TVE00053

DHW expansion vessel, 18 litres

48.09

8TVE00054

DHW expansion vessel, 25 litres

55.86

8TVE00057

DHW expansion vessel, 40 litres

64.00

HEATING VESSEL • Interchangeable membrane (50-litre model), resistant to 99°C • Screw-down galvanised flange • 1.5 bar precharge • Maximum pressure 6 bar

CODE

PRODUCT

8TVE00110

HEAT. expansion vessel 18 litres

37.80

8TVE00111

HEAT. expansion vessel 25 litres

42.84

8TVE00112

HEAT. expansion vessel 35 litres

84.42

8TVE00115

HEAT. expansion vessel 50 litres

100.80

8TVE00118

HEAT. expansion vessel 80 litres

124.00

8TVE00120

HEAT. expansion vessel 100 litres

147.00

CODE

PRODUCT

8TVE00007

Expansion vessel Fx kit, 3/4” L1000 (for 18 - 24 - 25 - 35 litre vessels)

www.md-zenit.si +386 31 608 388

PRICE (€)

PRICE (€) 59.36

VENTILATED DISSIPATORS

SUMMER AIR-BASED DISSIPATORS FOR SOLAR INSTALLATIONS SMALL VENTILATED DISSIPATORS - TH SERIES Compact aluminium dissipators, complete with electric fan and painted metal duct, suitable for dissipating the excess power of solar installations into the atmosphere in Summer. System to be installed in series or parallel with the storage boiler, on the solar circuit.

PIPE 8SAR01001 8SAR01002

MOD. TH10 TH15

DISSIPATED POWER

SOLAR SYSTEM

ELEC. POWER

10kW

Up to 15 m2

300

350

163

1”

IP 44

68 W

12kW

355

400

163

1”

IP 44

68 W

Up to 20 m

8SAR01003

TH30

35kW

Up to 60 m

451

500

163

1”

IP 44

230 W

8SAR01004

TH45

43kW

Up to 80 m2

451

194

1” ¼

IP 44

230W

466

620

205

1” ¼

IP 44

173W

8SAR01005

TH45 ECO

40Kw

Up to 100 m

CODE

PRODUCT

8SAR01001

TH10 ventilated dissipator assembly

332.80

8SAR01002

TH15 ventilated dissipator assembly

396.80

8SAR01003

TH30 ventilated dissipator assembly

492.80

8SAR01004

TH45 ventilated dissipator assembly

584.00

8SAR01005

TH45-ECO ventilated dissipator assembly

764.00

www.md-zenit.si +386 31 608 388

PRICE (€)

VENTILATED DISSIPATORS

CTH - VENTILATED DISSIPATORS FOR INDUSTRIAL INSTALLATIONS VENTILATED DISSIPATORS - CTH SERIES Compact aluminium dissipators, complete with electric fan and painted metal duct - suitable for dissipating the excess power of solar installations into the atmosphere in Summer. System to be installed in series or parallel with the storage boiler, on the solar circuit.

Structure and frames not included

• • • • • • • •

Body in microchannel aluminium Best heat-exchange coefficients in their category Differential with outside air as low as +2°C!!! Low water-side pressure losses (< 100 mBar) Excellent thermal expansion behaviour Low-power EBM EC fans Super-quiet versions available Easily cleaned air-side fins

PRODUCT

PRICE (€)

DRY-COOLER CTH 25

2,821.50

DRY-COOLER CTH 32

3,995.00

UNITS WITH DEDICATED SPECIFICATIONS DESIGNED ON REQUEST

www.md-zenit.si +386 31 608 388

HEAT PUMPS

www.md-zenit.si +386 31 608 388

DHW HEAT PUMPS

PTH - AIR-WATER HEAT PUMP

PTH heat pumps use the thermal energy in the air to produce domestic hot water. The process is as effective and efficient as possible with average C.O.P. > 3. The energy savings from PTH heat pumps also provides environmental benefits, as most of the energy used comes from nature. Their ease of installation, quiet and reliable operation and very low maintenance requirements complete the advantages of this highly ecological and economical system. • Easy to install • Interior installation • Economical • Widely used • Backed up by emergency electric element • Heat pump unit on top of boiler • Condenser outside boiler so as not to contaminate the DHW • Solar coil included as standard • Electronic control already wired and programmed for most common control scenarios • Can be installed in any plant room • No flue! • No gas supply! • The tank (275 litres) stores and maintains the heat for long periods, thanks to the 50 mm PU insulating jacket

PTH 300 - 0 coils

PTH 300 - 1 coil

www.md-zenit.si +386 31 608 388

PTH 300 - 2 coils

PTH 300 DIMENSIONS AND WEIGHT PTH 300 - 0S.

PTH 300 - 1S.

PTH 300 - 2S.

1845

B C

mm mm

1410 1150

D E F G H I L M

mm mm mm mm mm mm mm mm mm

965 155 835 1145

965 690 255 365 155 835 1145

1060 965 890 690 255 365 155 835 1145

P Øc Ø Shipping weight

mm mm mm kg

425 160 660 112

425 160 660 127

425 160 660 145

CODE

PRODUCT

8TBO00308

PTH 300 - 0 coils

2,382.00

8TBO00310

PTH 300 - 1 coil

2,454.00

8TBO00312

PTH 300 - 2 coils

2,632.00

www.md-zenit.si +386 31 608 388

PRICE (€)

DHW HEAT PUMPS

THERMODYN: SOLAR-ASSISTED HEAT PUMP THERMODYN heat pumps use the thermal energy in the air to produce domestic hot water. The process occurs in the most effective and efficient manner, using the energy from solar radiation for the most part. Their ease of installation, quiet and reliable operation and very low maintenance requirements complete the advantages of this highly ecological and economical system.

MODEL BOILER

THD

THD-1S

litres

250

0.85

Flow rate required by coil for DT= 80/60°C

m /h

0.84

Production of domestic hot water 80/60°C - 10-45 °C (DIN 4708)

m3/h

0.48

Maximum boiler working pressure

bar

Maximum working pressure, auxiliary coil

bar

Shipping weight

Capacity Coil surface area

HEAT PUMP UNIT Electrical power supply

V/Ph/Hz

230/1/50

Max water temperature

°C

Ambient temperature (min/max)

°C

-7/+32

Heating element thermal power

1500

Thermal power

1700

Power draw (average) (1)

450

Refrigerant

type

R134A

Noise level (2)

dBA

C.O.P. (50°C) (3)

Shipping weight

7.3

Dimensions (hxWxD)

> 2.6

THERMODYNAMIC PANEL 2000x800x40

Extraction line connection

3/8” SAE FLARE

Liquid line connection

1/4” SAE FLARE

(1) at 55 °C (2) at 1 metre distance (free field) (3) Air temperature 15 °C - Water temperature 15-50 °C

www.md-zenit.si +386 31 608 388

THD-0S THD-1S

1497

765

815

220

1255

1112

665

275

565

1497

765

815

220

1255

1112

793

665

275

213

565

DHW take-off

Rp3/4’’ M

Cold water inlet

Rp3/4’’ M

Recirculation

Rp1/2’’ M

Alternative energy return

Rp3/4’’ M

Alternative energy flow

Rp3/4’’ M

Magnesium anode

Rp1/2’’ F

CODE

PRODUCT

8TAC00220

Thermodyn 250 system

2,940.00

8TAC00222

Thermodyn 250 - 1S system

3,145.00

6TAC00035

Heat pump commissioning and testing - Thermodyn

www.md-zenit.si +386 31 608 388

PRICE (€)

300.00

AIR-WATER HEAT PUMPS

PAW - ECO: MONOBLOC AIR-WATER HEAT PUMP Outdoor Air-water Electric Heat Pump - the latest air-water heat pump series in compact version for outside installation, with a cutting-edge design and high COP at an unbeatable price. • Compact unit

Internal switch

RVS21 + AVS55 regulation

• • • • • • • • Control panel / thermostat

• •

External sensor

Included as standard: 1. Remote control display 2. Five metre standard cable 3. Siemens base RVS41 control unit

Circulation pump included

MODEL

External installation Pre-painted steel case Max. temperature up to 55 °C Max. temp. with EVI version up to 65 °C Air-conditioning option Guaranteed to work down to -25 °C Extremely quiet axial fans Control unit manages heating and DHW Suitable for underfloor systems or radiators Wired or wireless control

PAW-ECO05

PAW-ECO08

PAW-ECO15

PAW-ECO18

kWt / kWe / COP

5.9 / 1.4 / 4.4

8.8 / 2.0 / 4.4

13.2 / 3.0 / 4.4

16.2 / 3.7 / 4.4

A2/W35

5.3 / 1.4 / 3.8

7.6 / 2.0 / 3.8

11.5 / 3.0 / 3.8

14.1 / 3.7 / 3.8

A7/W45

5.7 / 1.6 / 3.5

8.4 / 2.4 / 3.5

13.0 / 3.7 / 3.5

15.8 / 4.5 / 3.5

A2/W45

5.2 / 1.6 / 3.1

7.4 / 2.4 / 3.1

11.4 / 3.7 / 3.1

13.9 / 4.5 / 3.1

A35/W7

5.5

8.8

11.1

A35/W20

8.1

12.8

15.9

Output / Input / COP

HEATING MODES A7/W35

REFRIGERATION POWER (kWf)

CODE

PRODUCT

8TAC00047

Heat pump PAW-ECO5 – 55 - H – 230V

5,200.00

8TAC00052

Heat pump PAW-ECO8 – 55 - H – 230V

6,715.00

8TAC00062

Heat pump PAW-ECO15 – 55 - H – 400V

7,115.00

8TAC00067

Heat pump PAW-ECO 18 – 65 - H – 400V

8,697.00

6TAC00340

Cold/Hot option - PAW-ECO

390.00

6TAC00390

230V compressor option - for models up to 16kW

130.00

6TAC00395

EVI 65°C compressor option

6TAC00045

Heat pump commissioning and testing - Models < 20kW

www.md-zenit.si +386 31 608 388

PRICE (€)

1,063.40 520.00

PAW - S: SPLIT AIR-WATER HEAT PUMP PAW - Outdoor Air-water Electric Heat Pump - the latest air-water heat pump series in compact version for outside installation, with a cutting-edge design and high COP at an unbeatable price.

Internal switch

Control panel

RVS21 + AVS55 regulation

External sensor

MODEL Output / Input / COP

• • • • • • • • • •

Compact unit External installation Stainless-steel case Maximum temperature up to 55 °C Max. temp. with EVI version up to 65 °C Air-conditioning option Guaranteed to work down to -25 °C Extremely quiet axial fans Control unit to manage heating and DHW Suitable for underfloor systems or radiators

PAW-S08

PAW-S11

PAW-S15

PAW-S18

kWt / kWe / COP

A7/W35

8.8 / 2.0 / 4.4

11.4 / 2.6 / 4.4

13.2 / 3.0 / 4.4

16.2 / 3.7 / 4.4

A2/W35

7.6 / 2.0 / 3.8

9.9 / 2.6 / 3.8

11.5 / 3.0 / 3.8

14.1 / 3.7 / 3.8

A7/W45

8.4 / 2.4 / 3.5

11.3 / 3.2 / 3.5

13.0 / 3.7 / 3.5

15.8 / 4.5 / 3.5

A2/W45

7.4 / 2.4 / 3.1

9.9 / 3.2 / 3.1

11.4 / 3.7 / 3.1

13.9 / 4.5 / 3.1

PAW-S22

PAW-S27

PAW-S35

PAW-S50

kWt / kWe / COP

A7/W35

18.4 / 4.2 / 4.4

16.2 / 3.7 / 4.4

28.8 / 6.56 / 4.4

40.7 / 9.3 / 4.4

A2/W35

16.0 / 4.2 / 3.8

14.1 / 3.7 / 3.8

25.1 / 6.57 / 3.8

35.4 / 9.3 / 3.8

A7/W45

18.3 / 5.2 / 3.5

15.8 / 4.5 / 3.5

27.2 / 7.7 / 3.5

38.9 / 11.1 / 3.5

A2/W45

16.0 / 5.2 / 3.1

13.9 / 4.5 / 3.1

16.0 / 5.2 / 3.1

34.1 / 11.1 / 3.1

MODEL Output / Input / COP

CODE

PRODUCT

8TAC00250

Heat pump PAW-S8 – 55 - H – 400V

9,549.75

8TAC00255

Heat pump PAW-S11 – 55 - H – 400V

9,947.55

8TAC00260

Heat pump PAW-S15 – 55 - H – 400V

10,273.95

8TAC00265

Heat pump PAW-S18 – 65 - H – 400V

11,299.05

8TAC00270

Heat pump PAW-S22 – 65 - H – 400V

11,788.65

8TAC00275

Heat pump PAW-S27 – 65 - H – 400V

14,035.20

8TAC00280

Heat pump PAW-S35 – 65 - H – 400V

17,878.05

8TAC00285

Heat pump PAW-S50 – 55 - H – 400V

22,761.3

6TAC00350

Cold/Hot option - PAW-S 8/20

748.80

6TAC00355

Cold/Hot option - PAW-S 20/30

998.40

6TAC00360

Cold/Hot option - PAW-S 30/50

1,248.00

6TAC00395

EVI 65°C compressor option (when not already included)

1,063.40

6TAC00390

230V compressor option - for models up to 16kW

130.00

6TAC00045

Heat pump commissioning and testing - Models < 20kW

520.00

6TAC00050

Heat pump commissioning and testing - Models < 50kW

910.00

www.md-zenit.si +386 31 608 388

PRICE (€)

AIR-WATER HEAT PUMPS

CALDENSA: SPLIT DIRECT CONDENSATION HEAT PUMP Direct condensation heat pump with Siemens regulation able to supply hot water at up to 65°C even at -10°C outside temperatures thanks to Scroll EVI vapour injection compressors. • • • • • • • • • •

MODEL Output / Input / COP HEATING MODES A7 / W35 A2 / W35 A-7 / W35 COOLING MODES (OPTIONAL) A35 / W7 TECHNICAL SPECIFICATIONS Air temperature limits Water temperature limits Air flow rate REFRIGERATION CIRCUIT Refrigerant Oil Defrosting Condensate antifreeze protection Low-pressure switch High-pressure switch PHYSICAL FEATURES H x W x L [mm] Weight Installation Case Protection ( EN 60 529) ELECTRICAL CONNECTIONS Electrical data Compressor Rated current [A] Maximum current [A] Soft starter [A] Compressor cable (n x mm2)

Works with outside air temperatures as low as -20°C External compressor means no inside noise Long-life compressors Optimised COP without inverter losses COP of 4.4 with A7/W35 Improved defrosting thanks to the direct heat mass of the puffer Very simple hydraulic connection No pump or other complicated system components. Combined with 500 litre condensing puffer suitable for connection to existing radiator, underfloor and fancoil heating systems. Condensing puffer can be integrated with various auxiliary energy sources such as stoves and boilers.

CAL 10

CAL 15

CAL 20

kWt / kWe / COP

11.9 / 2.7 / 4.4 10.9 / 2.8 / 3.8 8.7 / 2.8 / 3.1

14.4 / 3.3 / 4.3 13.1 / 3.4 / 3.8 10.6 / 3.5 / 3.0

19.8 / 4.6 / 4.3 18.2 / 4.7 / 3.8 14.8 / 4.7 / 3.1

8.5 / 3.4 / 2.5

10.2 / 4.2 / 2.4

14.0 / 5.8 / 2.4

-20 °C to 35 °C 20°C to 65°C 3 500 m3/h

-20 °C to 35 °C 20°C to 65°C 4 500 m3/h

-20 °C to 35 °C 20°C to 65°C 5 000 m3/h

R407C 1 700 ml POE Automatic yes 0.05 MPa 3.2 MPa

R407C 1700 ml POE Automatic yes 0.05 MPa 3.2 MPa

1210 x 500 x 1270 150 kg Outdoor, exposed Stainless steel IP43

400V 3N 50Hz scroll EVI 5.7 8.4 5x2.5

400V 3N 50Hz scroll EVI 6.9 9.5 33 5x1.5

400V 3N 50Hz scroll EVI 9.0 13.5 37 5x2.5

www.md-zenit.si +386 31 608 388

CALDENSA H - heating only

CODE

PRODUCT

PRICE (€)

8TSI00310

CALDENSA system - 10 kW - H

9,546.84

8TSI00315

CALDENSA system - 15KW - H

11,466.84

8TSI00320

CALDENSA system - 20KW - H

12,426.84

CALDENSA HC - Hot and Cold

CODE

PRODUCT

8TSI00340

CALDENSA system - 10KW - HC

9,936.84

8TSI00345

CALDENSA system - 15KW - HC

11,856.84

8TSI00350

CALDENSA system - 20KW - HC

12,816.84

www.md-zenit.si +386 31 608 388

PRICE (€)

AIR-WATER HEAT PUMPS

CALDENSA HS - Heating and DHW

CODE

PRODUCT

PRICE (€)

8TSI00360

CALDENSA system - 10KW - HS

10,890.84

8TSI00365

CALDENSA system - 15KW - HS

12,810.84

8TSI00370

CALDENSA system - 20KW - HS

13,770.84

CALDENSA HCS - Heating, conditioning and DHW

CODE

PRODUCT

8TSI00380

CALDENSA system - 10KW - HCS

12,860.10

8TSI00385

CALDENSA system - 15KW - HCS

14,780.10

8TSI00390

CALDENSA system - 20KW - HCS

15,740.10

www.md-zenit.si +386 31 608 388

PRICE (€)

WATER-WATER HEAT PUMPS

PWW: INDOOR ELECTRIC HEAT PUMPS COMPACT WATER-WATER HEAT PUMPS • • • • • •

Interior installation Powder coated sheet metal casing Corrosion protection Maximum temperatures up to 55 °C, with R134 up to 75 °C. Support for passive cooling Heat sources: ground source geothermal probe, borehole or horizontal collector Control unit to manage heating and DHW Suitable for underfloor systems or radiators Small footprint (0.35 m2)

• • •

Included as standard: 1. Electrical wiring unit 2. Siemens base RVS41 control unit

DESCRIPTION

PWW10

Thermal power output / COP at B0/W35

16PWW

PWW20

PWW33

PWW50

PWW100

7.5 / 4.6

16.0 / 4.6

19.2 / 4.6

32.0 / 4.6

44.9 / 4.2

Thermal power output / COP at B0/W45

7.1 / 3.5

15.0 / 3.5

18.1 / 3.5

30.2 / 3.5

43.0 / 3.3

Thermal power output / COP a W10/W35

10.4 / 6.4

22.3 / 6.4

26.3 / 6.4

44.0 / 6.4

57.2 / 5.1

110/20.3/5.4

Thermal power output / COP a W10/W45

9.8 / 4.8

20.9 / 4.8

24.5 / 4.8

41.0 / 4.8

56.0 / 4.2

5/4“

6/4“

2“

Connection to heating system

1“

80/19.5/4.1

Max. water outlet temp.

R407C max 60 °C (R134A max 75 °C)

Electrical power supply

3/N/PE ~400 V, 50 Hz (available for models PWW5 - 10 - 16 : 1/N/PE ~230 V, 50 Hz)

CODE

PRODUCT

8TAC00080

Heat pump PWW10 - 55 - H - 400V

6,656.00

8TAC00085

Heat pump PWW16 - 55 - H - 400V

7,906.60

8TAC00090

Heat pump PWW20 - 55 - H - 400V

8,738.60

8TAC00095

Heat pump PWW33 - 55 - H - 400V

13,889.20

8TAC00100

Heat pump PWW50 - 55 - H - 400V

18,714.00

8TAC00105

Heat pump PWW100 - 55 - H - 400V

30,880.00

6TAC00365

Cold/Hot option - PWW up to 16

499.20

6TAC00370

Cold/Hot option - PWW 20

582.40

6TAC00375

Cold/Hot option - PWW 20/50

665.60

6TAC00390

230V compressor option - for models up to 16kW

130.00

6TAC00045

Heat pump commissioning and testing - Models < 20kW

520.00

6TAC00050

Heat pump commissioning and testing - Models < 50kW

910.00

6TAC00055

Heat pump commissioning and testing - Models > 50kW

1,170.0

www.md-zenit.si +386 31 608 388

PRICE (€)

HEAT ACTUATED HEAT PUMPS

SHC 10 - ZEOLITE ABSORBER FOR LOW TEMPERATURES Compact heat power heat pump for interior air conditioning and heating. Absorption cooling with particularly low working temperatures, easy to install and use. SHC devices reach around 100% of their rated capacity at a working temperature of 65°C. They are suitable for outside temperatures up to around 35°C. The nominal output of the SHC 10 is 10 kW. The compact design allows for space-saving installation for easy assembly; all hydraulic fittings are easily accessible on the top of the machine. • • •

Unit optimised for pallet truck handling. Refrigerant: water Absorbent material: Zeolite salts

TECHNICAL SPECIFICATIONS Length

1,100 mm

Height

1,370 mm

Width

750 mm

Weight of SHC 18

390 kg

Weight of SHC 18-FC (Free Cooling)

395 kg

Fitting position From ground

1,400 mm

Nominal fitting size Thermal supply (2x)

G 1“

Cooling (2x)

G 1 1/4”

Dissipation (2x)

G 1 1/2”

The heat pump works with a heat supply, permissible temperatures 55 - 100°C. The machine's electricity consumption is just 20W. The machine includes electronic circulators for the flow to the conditioning system, the external cooling system and the thermal supply system to facilitate installation and commissioning, as well as to minimise electricity consumption. SHC devices are suitable for combination with the following heat supplies: • Thermal solar field • Micro cogeneration • Industrial waste heat

CODE

PRODUCT

8TAC00027

SHC 10 absorption heat pump - external pumps

23,280.00

8TAC00025

SHC 10 absorption heat pump - integrated pumps

27,600.00

8TAC00030

SHC 10 absorption heat pump - integrated + freecooling pumps

28,800.00

www.md-zenit.si +386 31 608 388

PRICE (€)

SHC 18 - ZEOLITE ABSORBER FOR HIGH TEMPERATURES Compact heat power heat pump for interior air conditioning and heating. With integrated hydraulic unit, it is particularly easy to install, providing space savings. It can be used efficiently with dry ventilated dissipators with outside temperature up to 40°C. It reaches its optimum capacity at supply temperatures of 85°C. The rated capacity of the SHC 18 is 18 kW. For easy installation, all hydraulic connections are easily accessible on the top of the machine. • • •

Unit optimised for pallet truck handling. Refrigerant: water Absorbent material: Zeolite salts

TECHNICAL SPECIFICATIONS Length

1,100 mm

Height

1,370 mm

Width

750 mm

Weight of SHC 18

420 kg

Weight of SHC 18-FC

425 kg

Fitting position From ground

1,400 mm

Nominal fitting size Thermal supply (2x)

G 1 1/4“

Cooling (2x)

G 1 1/2”

Dissipation (2x)

G 1 1/2”

The heat pump works with a heat supply, permissible temperatures 65 - 100°C. The machine's electricity consumption is just 20W. The machine includes electronic circulators for the flow to the conditioning system, the external cooling system and the thermal supply system to facilitate installation and commissioning, as well as to minimise electricity consumption. SHC devices are suitable for combination with the following heat supplies: • Thermal solar field • Micro cogeneration • Industrial waste heat

CODE

PRODUCT

8TAC00017

SHC 18 absorption heat pump - external pumps

34,800.00

8TAC00015

SHC 18 absorption heat pump - integrated pumps

39,600.00

8TAC00020

SHC 18 absorption heat pump - integrated + freecooling pumps

40,800.00

www.md-zenit.si +386 31 608 388

PRICE (€)

HEAT PUMP ACCESSORIES

COMMON HEAT PUMP ACCESSORIES

CODE

PRODUCT

6TAC00110

Softstarter 12-15A mci

400.40

6TAC00115

Softstarter 25A MCI

754.00

6TAC00120

Softstarter 40A MCI

1,552.20

6TAC00150

Flow switch

223.60

6TAC00155

Flow switch 3000 l/h

223.60

6TAC00170

Circulator UPM25-70

265.20

6TAC00175

Circulator Alpha2 25-60

293.80

6TAC00180

Circulator Magna 32-100

587.60

6TAC00210

RVS21 heat pump electronics board

663.00

6TAC00213

RVS61 heat pump electronics board

470.60

6TAC00220

Control unit expansion module - AVS55.196

202.80

6TAC00225

Control unit expansion module - AVS75.390

317.20

6TAC00230

PDC communications module - OCI345.06/101

188.60

6TAC00240

HMI AVS37 digital control panel - on-board machine

249.60

6TAC00245

Wired digital control panel QAA75 - Ambient thermostat

390.00

6TAC00250

Wireless digital control panel QAA78.610/501 Ambient thermostat

566.80

6TAC00260

Ambient thermostat QAA55

166.40

6TAC00265

Temperature sensor - QAZ36.522

26.00

6TAC00270

External sensor - QAC34/101

26.00

6TAC00280

Web server - OZW672.01

709.80

6TAC00282

Web server - OZW672.04

1,302.60

6TAC00285

Web server - OZW672.16

1,692.60

6TAC00320

Service case - 0CI700

www.md-zenit.si +386 31 608 388

PRICE (â&#x201A;Ź)

702.00

CODE

PRODUCT

6TAC00045

Heat pump commissioning and testing - Models < 20kW

520.00

6TAC00390

230V compressor option - for models up to 16kW

130.00

6TAC00280

Web server - OZW672.01

709.80

www.md-zenit.si +386 31 608 388

PRICE (â&#x201A;Ź)

www.md-zenit.si +386 31 608 388

SYSTEMS

www.md-zenit.si +386 31 608 388

NATURAL - VACUUM CIRCULATION SOLAR SYSTEMS

SKYPOWER: VACUUM DHW SOLAR SYSTEM SKYPOWER Natural circulation solar system, composed of high-efficiency vacuum tubes collector, Puffer solar boiler for instantaneous production of domestic hot water via a copper heat exchanger.

Composition: • Horizontal 200 litre natural circulation hot water boiler • 20 glass vacuum tubes in 10-piece cases • Heat exchanger and tank in stainless steel • Aluminium support frames available for versions • Automatic filling and control unit • Thermostatic mixer • Antifreeze/corrosion inhibitor mix for first fill Advantages: • The most aesthetically pleasing natural circulation hot water boiler • • • • • •

High-quality material guarantees optimal long-term operation 5+5-year product warranty Domestic hot water production in an ultra-hygienic system which avoids the problem of legionella Intuitive and simple assembly system on flat or pitched roofs Tested with the most innovative technologies Made in Italy

TECHNICAL CHARACTERISTICS Product weight when empty (without fasten- 75 kg ings) Gross area (excluding boiler)

3.10 m2

Absorber area

1.71 m2

Stainless heat-exchanger area

2.40 m2

DHW fittings material

Brass

Available colours

Tile red / grey

Insulation material

Polyurethane

Average insulation thickness

50 mm

Maximum pressure on solar primary

Atmospheric

Maximum pressure on DHW secondary

6 bar (600 kPa)

Solar fluid

Water / Water + glycol

Borosilicate glass tube material

3.3

Selective material

Graded Cr-Al-N/ Cu

Hail resistance (diameter)

40 mm

www.md-zenit.si +386 31 608 388

Ventilazione sensore di livello Acqua calda sanitaria Acqua fredda D\ja`hVc

tubazioni DN 20 isolamento 20 mm

Reintegro con elettrovalvola

8TKR00051 valvola deviatrice 8TKR00030 miscelatore termostatico Acqua calda

)E<C!!!") gR]g`]R UZ cZeVX_`

Estivo: l'acqua calda in arrivo dai pannelli va direttamente alle utenze Inverno: l'acqua solare pre-riscaldata entra nella caldaia

8TVE00050 vaso espansione sanitario

8TKR00014 valvola di sicurezza

Acqua fredda Utenza sanitaria

4R]URZR 2TTf^f]` dR_ZeRcZ`

Acquedotto

CODE

PRODUCT

8TSP00033

SKYPOWER 20T system Pegasus aesthetic version - Grey

1,848.73

8TSP00034

SKYPOWER 20T system Pegasus aesthetic version - Red roof tile colour

1,848.73

CODE

PRODUCT

PRICE (€)

Fixing kit (integral part of system) 8TTP00010

Aluminium chassis kit SKYPOWER 200Lt. 20T. - Tile mount

164.78

8TTP00014

Aluminium chassis kit SKYPOWER 200Lt. 20T. - Flat roof

210.00

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TKR00512

Double SPIRALRHOR stripwound steel hose DN 20mm + 3rd HOSE / Insulation 20mm

41.08

8TKR00181

SPIRALRHOR stripwound fitting DN 20 x F 3/4”

17.82

8TKR00206

SPIRALRHOR stripwound fitting DN 20 x M 3/4”

16.20

6TSI00010

Start-up and commissioning of solar system - WATER models

Optional accessories

www.md-zenit.si +386 31 608 388

135.00

NATURAL CIRCULATION SOLAR SYSTEMS - FLAT

PEGASUS: FLAT DHW SOLAR SYSTEM PEGASUS Natural circulation solar system, composed of high-efficiency flat collector, Puffer solar boiler for instantaneous production of domestic hot water via a copper heat exchanger. Composition: • Horizontal 150 or 250 litre natural circulation hot water boiler • Highly selective FTH 2.0 flat collectors • Heat exchanger and tank in stainless steel • Aluminium support frames available for versions • Automatic filling and control unit • Antifreeze/corrosion inhibitor mix for first fill Advantages:

• • • • • • •

The most aesthetically pleasing natural circulation hot water boiler High-quality material guarantees optimal long-term operation 5+5-year product warranty Domestic hot water production in an ultra-hygienic system which avoids the problem of legionella Intuitive and simple assembly system on flat or pitched roofs Tested with the most innovative technologies Made in Italy

PEGASUS 150 FLAT

PEGASUS 250 FLAT

litres

150

250

106

176

Gross collector area

2.15

4.30

Open area

2.00

4.00

Absorber area

2.00

4.00

Heat-exchanger material

AISI 316

Boiler material

AISI 304

Boiler capacity Dry weight

Hydraulic fittings

G”

3/4 M

Max heat-exchanger pressure

bar

Boiler insulation Warranty

years

www.md-zenit.si +386 31 608 388

CODE

PRODUCT

PRICE (€)

8TSP00051

PEGASUS 150 litre FTH system Grey

2,080.00

8TSP00052

PEGASUS 150 litre FTH system Tile red

2,080.00

8TSP00061

PEGASUS 250 litre FTH system Grey

2,980.00

8TSP00062

PEGASUS 250 litre FTH system Tile red

2,980.00

8TTP00050

Chassis KIT PGS 150 litre FTH Pitched roof / Bent tile brackets

184.06

8TTP00051

Chassis KIT PGS 150 litre FTH Pitched roof / Tile bracket

212.52

8TTP00052

Chassis KIT PGS 150 litre FTH Pitched roof / Long screws

196.92

8TTP00053

Chassis KIT PGS 150 litre FTH Flat roof

298.09

8TTP00060

Chassis KIT PGS 250 litre FTH Pitched roof / Bent tile brackets

336.02

8TTP00061

Chassis KIT PGS 250 litre FTH Pitched roof / Tile brackets

391.05

8TTP00062

Chassis KIT PGS 250 litre FTH Pitched roof / Long screws

314.18

8TTP00063

Chassis KIT PGS 250 litre FTH Flat roof

376.74

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TKR00512

Double SPIRALRHOR stripwound steel hose DN 20mm + 3rd HOSE / Insulation 20mm

41.08

8TKR00181

SPIRALRHOR stripwound fitting DN 20 x F 3/4”

17.82

8TKR00206

SPIRALRHOR stripwound fitting DN 20 x M 3/4”

16.20

6TSI00010

Start-up and commissioning of solar system - WATER models

ACCESSORIES

www.md-zenit.si +386 31 608 388

135.00

VACUUM - FORCED CIRCULATION SOLAR SYSTEMS

RTH WATER - BASIC: DHW VACUUM SYSTEMS Forced-circulation solar thermal systems: • Vacuum collectors • RTH Heatpipe Technology • Systems designed to minimise costs

RTH WATER SYSTEMS COMPOSITION Um

150

200-2

200-1

300

400

500

10 RTH - Heatpipe Collector 10T CPC TH

Pcs

Bent tile mount collector Fx base kit

Pcs

Vertical DHW boiler, 2 fixed coils

Pcs

One-way solar station

Pcs

Digital solar control unit DeltaSol BS/4 VBus Th

Pcs

SOL expansion vessel 10bar

Pcs

Expansion vessel Fx kit 3/4” L1000

Pcs

3/4” solar thermostatic mixing valve - anti-scald

Pcs

Premixed diathermic fluid L -10° C CF

DHW X RTH10 fittings kit

Pcs

CODE

PRODUCT

PRICE (€)

8TSI00010

DHW system 150 litre 1xRTH10 - BASIC

2,175.57

8TSI00012

DHW system 200 litre 2xRTH10 - BASIC

3,226.99

8TSI00013

DHW system 200 litre 1xRTH10 - BASIC

2,374.60

8TSI00014

DHW system 300 litre 2xRTH10 - BASIC

3,397.25

8TSI00016

DHW system 400 litre 3xRTH10 - BASIC

4,411.61

8TSI00018

DHW system 500 litre 3xRTH10 - BASIC

4,583.21

ACCESSORIES 8TKR00480

Double corrugated steel hose ECO DN 16mm / Insulation 20mm

25.22

8TKR00176

CORRUGATED fitting DN 16 x F 3/4”

14.45

8TKR00178

CORRUGATED fitting DN 16 x M 3/4”

11.48

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TSO00130

DL2 Solar Datalogger

470.00

6TSI00010

Start-up and commissioning of solar system - WATER models

135.00

www.md-zenit.si +386 31 608 388

DTH WATER - PREMIUM: PREASSEMBLED DHW VACUUM SYSTEMS Forced-circulation solar thermal systems: • Vacuum collectors • DTH Direct-flow Technology • Systems designed for maximum comfort and maximum heat production • Systems designed to minimise installation times and costs

DTH WATER SYSTEMS COMPOSITION Um

200

300

400

500

10 DTH - Direct Flow Collector 10T CPC TH

Pcs

Bent tile mount collector Fx base kit

Pcs

Vert. DHW boiler 2coils fx - PREASSEMBLED

Pcs

Digital solar control unit DeltaSol BS/4 VBus Th

Pcs

DHW expansion vessel

Pcs

SOL expansion vessel

Pcs

1/2” solar thermostatic mixing valve - anti-scald

Pcs

Premixed diathermic fluid L -20° C CF

DHW X DTH10 fittings kit

Pcs

CODE

PRODUCT

PRICE (€)

8TSI00080

DHW system 200 litre 1xDTH10 - PREMIUM

2,716.38

8TSI00082

DHW system 300 litre 2xDTH10 - PREMIUM

3,963.72

8TSI00084

DHW system 400 litre 3xDTH10 - PREMIUM

5,184.60

8TSI00086

DHW system 500 litre 3xDTH10 - PREMIUM

5,308.08

ACCESSORIES 8TKR00480

Double corrugated steel hose ECO DN 16mm / Insulation 20mm

25.22

8TKR00176

CORRUGATED fitting DN 16 x F 3/4”

14.45

8TKR00178

CORRUGATED fitting DN 16 x M 3/4”

11.48

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TSO00130

DL2 Solar Datalogger

470.00

6TSI00010

Start-up and commissioning of solar system - WATER models

135.00

www.md-zenit.si +386 31 608 388

FLAT - FORCED CIRCULATION SOLAR SYSTEMS

FTH WATER - BASIC: DHW FLAT SYSTEMS Forced circulation thermal solar systems for domestic hot water production, designed by Thermics for the lowest possible purchasing and running costs. Long-lasting, highly reliable systems suitable for limited Winter climates and production compared to the vacuum solution. • • •

Selective flat collectors Meander layout technology Systems designed for the lowest possible purchasing and running costs

FTH BASIC WATER SYSTEMS COMPOSITION Um

150

200-1

200-2

300

400

500

FTH 2.0 flat solar collector - ECO ALU

Pcs

FTH base Fx KIT - ECO Bent-tile installation

Pcs

Vert. DHW boiler 2coils fx

Pcs

One-way solar station

Pcs

Digital solar control unit DeltaSol BS/4 VBus Th

Pcs

SOL expansion vessel 10bar

Pcs

Expansion vessel Fx kit 3/4” L1000

Pcs

3/4” solar thermostatic mixing valve - anti-scald

Pcs

Premixed diathermic fluid L -10° C CF

FTH 2.0 ECO fittings kit

Pcs

CODE

PRODUCT

PRICE (€)

8TSI00020

DHW system 150 litre 1xFTH2.0 ECO - BASIC

1,872.97

8TSI00022

DHW system 200 litre 1xFTH2.0 ECO - BASIC

2,167.54

8TSI00023

DHW system 200 litre 2xFTH2.0 ECO - BASIC

2,747.26

8TSI00024

DHW system 300 litre 2xFTH2.0 ECO - BASIC

2,845.26

8TSI00026

DHW system 400 litre 3xFTH2.0 ECO - BASIC

3,731.09

8TSI00028

DHW system 500 litre 3xFTH2.0 ECO - BASIC

3,868.29

ACCESSORIES 8TKR00480

Double corrugated steel hose ECO DN 16mm / Insulation 20mm

25.22

8TKR00176

CORRUGATED fitting DN 16 x F 3/4”

14.45

8TKR00178

CORRUGATED fitting DN 16 x M 3/4”

11.48

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TSO00130

DL2 Solar Datalogger

470.00

6TSI00010

Start-up and commissioning of solar system - WATER models

135.00

www.md-zenit.si +386 31 608 388

FTH WATER - PREMIUM: PREASSEMBLED DHW FLAT SYSTEMS Forced circulation thermal solar systems for domestic hot water production, designed by Thermics for maximum reliability and durability. Systems suitable for limited Winter climates and production compared to the vacuum solution. The boiler has a solar unit and pre-installed and wired control unit in able to ensure an even more standard and easy installation • • • •

Highly selective flat collectors Simple harp layout technology Maximum thermal insulation/collection capacity Systems designed for maximum comfort and maximum heat production Systems designed to minimise installation times and costs

•

FTH PREMIUM WATER SYSTEMS COMPOSITION Um

200

300

400

500

FTH Flat Collector

Pcs

1x2.5

2x2.0

3x2.0

3x2.5

Bent tile mount collector Fx base kit

Pcs

Vert. DHW boiler 2coils fx - PREASSEMBLED

Pcs

Digital solar control unit DeltaSol BS/4 VBus Th

Pcs

DHW expansion vessel

Pcs

SOL expansion vessel

Pcs

1/2” solar thermostatic mixing valve - anti-scald

Pcs

Premixed diathermic fluid L -20° C CF

DHW fittings kit for FTH

Pcs

CODE

PRODUCT

PRICE (€)

8TSI00090

DHW system 200 litre 1xFTH2.5 - PREMIUM

2,405.86

8TSI00092

DHW system 300 litre 2xFTH2.5 - PREMIUM

3,243.92

8TSI00094

DHW system 400 litre 3xFTH2.5 - PREMIUM

4,131.60

8TSI00096

DHW system 500 litre 3xFTH2.5 - PREMIUM

4,557.32

ACCESSORIES 8TKR00480

Double corrugated steel hose ECO DN 16mm / Insulation 20mm

25.22

8TKR00176

CORRUGATED fitting DN 16 x F 3/4”

14.45

8TKR00178

CORRUGATED fitting DN 16 x M 3/4”

11.48

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TSO00130

DL2 Solar Datalogger

470.00

6TSI00010

Start-up and commissioning of solar system - WATER models

135.00

www.md-zenit.si +386 31 608 388

VACUUM - FORCED CIRCULATION SOLAR SYSTEMS

ACQUEL 300: THERMAL SOLAR SYSTEM + HEAT PUMP Compact solar system for production of domestic hot water, combined with an electrical heat pump integrated in the boiler. Extremely simple system to install, with the following advantages: • • • • • •

DHW available all year round at any time of day Independence from fossil fuels Energy savings up to 75% Simple, fast installation with all installation accessories included Minimised space required in heating plant Excellent solution when PV energy produced is consumed onsite Up to 4 times more efficient than an electrical element Kit for 4/5 persons

• •

ACQUEL 300 COMPOSITION Um

300-2

300-4

10 DTH - Direct Flow Collector 10T CPC TH

Pcs

Flex. Fix. Kit RTH/DTH Pitched Roof

Pcs

DTH/RTH CF fittings kit

Pcs

Flexible fitting 22x22

Pcs

Two-way forced circulation unit

Pcs

Digital solar control unit DeltaSol BS/4 VBus Th

Pcs

Expansion vessel Fx kit 3/4” L1000

Pcs

SOL expansion vessel, 10bar, 25 litres

Pcs

DHW expansion vessel, 25 litres

Pcs

Premixed diathermic fluid L -20° C CF

1/2” solar thermostatic mixing valve - anti-scald

Pcs

PTH 300 1S.

Pcs

CODE

PRODUCT

PRICE (€)

8TSI00100

ACQUEL 300 system - 2 m2

4,441.68

8TSI00102

5,331.87

ACQUEL 300 system - 2 m

ACCESSORIES 8TKR00480

Double corrugated steel hose ECO DN 16mm / Insulation 20mm

25.22

8TKR00176

CORRUGATED fitting DN 16 x F 3/4”

14.45

8TKR00178

CORRUGATED fitting DN 16 x M 3/4”

11.48

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TSO00130

DL2 Solar Datalogger

470.00

6TSI00010

Start-up and commissioning of solar system - WATER models

135.00

www.md-zenit.si +386 31 608 388

HYBRID - FORCED CIRCULATION SOLAR SYSTEMS

HYBRID: ELECTRICAL AND HEAT ENERGY PRODUCTION SYSTEM Hybrid solar system for simultaneous production of: • Electricity • Thermal energy System composed of: • Hybrid thermal-PV modules • Fittings and tubing system for correct connection of plumbed part • Modular bracket system with certified structures • Specific pre-mixed antifreeze fluid to protect the solar exchanger • Single-phase high-efficiency inverter connecting the PV field and electricity network

CODE

PRODUCT

PRICE (€)

8TSI00710

HYBRID system - 3kWel - 12kWth

15,928.16

HYBRID Poli module 250Wp

Pcs

DHW insulating blanket - HYBRID

Pcs

HYBRID 3kw tubing/fittings kit

Pcs

Inverter - Ingecon Sun Lite 2.5 TL

Pcs

3kW frame kit

Pcs

ACCESSORIES 8SAR01001

TH10 ventilated dissipator assembly

332.80

6TSI00030

Solar system commissioning and start-up

135.00

www.md-zenit.si +386 31 608 388

COMBINED SYSTEMS

COMBI - RTH SYSTEMS FOR HEATING INTEGRATION Forced circulation thermal solar systems for production of domestic hot water and integration with heating systems have been designed by Thermics for maximum reliability and to fit in perfectly with your requirements. Systems all include: • New “Dcond” RTH-CPC series solar collectors • Base installation frames • Hydraulic fittings kit • Combined three-coil stainless-steel boiler • Solar circulation unit • Pre-configured solar control unit • Expansion vessels • Premixed, ready-to-use glycol antifreeze • Thermostatic mixer • Motorised diverter valve

COMBI RTH SYSTEMS COMPOSITION

500

800

1000

1250

10 DTH - Direct Flow Collector 10T CPC TH

Pcs

Bent tile mount collector Fx base kit

Pcs

COMBI RTH10 fittings kit

Pcs

Vert. combi 3coil stainless boiler

Pcs

Two-way forced circulation unit

Pcs

Digital solar control unit DeltaSol BS Plus

Pcs

Expansion vessel Fx kit 3/4” L1000

Pcs

Premixed diathermic fluid L -10° C CF

SOL expansion vessel

Pcs

HEAT. expansion vessel

Pcs

DHW expansion vessel, 18 litre

Pcs

1/2” solar thermostatic mixing valve - anti-scald

Pcs

www.md-zenit.si +386 31 608 388

CODE

PRODUCT

PRICE (€)

8TSI00030

COMBI 500 litre 4xRTH10 system

6,925.11

8TSI00031

COMBI 800 litre 5xRTH10 system

8,066.54

8TSI00032

COMBI 1000 litre 6xRTH10 system

9,202.32

8TSI00033

COMBI 1250 litre 8xRTH10 system

11,073.79

OPTIONAL ACCESSORIES 8TKR00480

Double corrugated steel hose ECO DN 16mm / Insulation 20mm

25.22

8TKR00176

CORRUGATED fitting DN 16 x F 3/4”

14.45

8TKR00178

CORRUGATED fitting DN 16 x M 3/4”

11.48

8TKR00051

Motorised 3-way diverter ball valve 3/4”

176.40

8TSO00130

DL2 Solar Datalogger

470.00

8TSO00112

Digital solar control unit Deltasol BX 5sensor 4relay SD VFS

351.90

8SAR01001

TH10 ventilated dissipator assembly

332.80

6TSI00030

Start-up and commissioning of solar system - COMBI models

135.00

www.md-zenit.si +386 31 608 388

SOLAR COOLING AND HEATING SYSTEMS

SHC: SOLAR COOLING & HEATING SYSTEMS Complete solar systems for: • Winter solar heating • Summer solar cooling • Year-round domestic hot water production The system is composed of: • High-efficiency vacuum solar field, complete with brackets and fittings • Solar pumping unit with pre-wired regulation and safety devices • Inertial heat storage (for Summer and Winter use) • Domestic hot water production station • Adiabatic air dissipation system • Zeolite thermal heat pump • Back-up reversible electric heat pump

www.md-zenit.si +386 31 608 388

CODE

PRODUCT

8TSI00800

SOLAR COOLING & HEATING 10kW system

8TSI00810

PRICE (€) 40,331.05

SHC 10 absorption heat pump - external pumps

Pcs

10 RTH - D-COND Collector 10T CPC TH

Pcs

Single SPIRALRHOR stripwound steel hose DN 25mm / Insulation 20mm

Vert. puffer storage tank Fe 1coil fx 1000 litres

Pcs

Bent tile mount collector Fx base kit

Pcs

KIT 2 long screws, L 300

Pcs

Flexible fitting 22x22

Pcs

SOL expansion vessel, 10bar, 150 litres

Pcs

HEAT. expansion vessel 80 litres

Pcs

TEE fitting DN 25 - SPIRALRHOR

Pcs

SPIRALRHOR stripwound fitting DN 25 x F 3/4”

Pcs

Sump for sensor 100mm Brass

Pcs

SPIRALRHOR stripwound fitting DN 25 x M 1”

Pcs

Conn. Cross+Sump+Cap and breather

Pcs

Straight fitting 22x M3/4” Brass

Pcs

Hardware packaging

min

Teflon seal 3/4”

Pcs

Solar unit, 2-way, DN 25 5-40 lpm 25/7-3

Pcs

Solar control unit DeltaSol MX

Pcs

SOLAR COOLING & HEATING 18kW system

58,037.16

SHC 18 absorption heat pump - external pumps

Pcs

10 RTH - D-COND Collector 10T CPC TH

Pcs

Single SPIRALRHOR stripwound steel hose DN 25mm / Insulation 20mm

Vert. puffer storage tank Fe 1coil fx 1000 litres

Pcs

Bent tile mount collector Fx base kit

Pcs

KIT 2 long screws, L 300

Pcs

Flexible fitting 22x22

Pcs

SOL expansion vessel, 10bar, 200 litres

Pcs

HEAT. expansion vessel 80lt

Pcs

TEE fitting DN 25 - SPIRALRHOR

Pcs

SPIRALRHOR stripwound fitting DN 25 x F 3/4”

Pcs

Sump for sensor 100mm Brass

Pcs

SPIRALRHOR stripwound fitting DN 25 x M 1”

Pcs

Conn. Cross+Sump+Cap and breather

Pcs

Straight fitting 22x M3/4” Brass

Pcs

Hardware packaging

min

Teflon seal 3/4”

Pcs

Solar unit, 2-way, DN 32 20-70 lpm - Grundfos UPS 32-80

Pcs

Solar control unit DeltaSol MX

Pcs

www.md-zenit.si +386 31 608 388

PRE-CONFIGURED THERMAL SOLAR FIELDS

PRE-CONFIGURED THERMAL SOLAR FIELDS FOR EXCHANGE WITH DHW STORAGE FLAT FIELD - 16 M2 - DHW Thermal solar field composed of flat solar panels. Complete with: • 8 x FTH 2.0 ECO collectors • Base brackets • Series and parallel fittings • 40 metres of insulated stainless-steel hose • Final fittings and junctions • Solar unit with heat exchanger • Solar expansion vessel • Solar fluid

CODE 8TSI00040

PRODUCT

PRICE (€) 2

FLAT SOLAR FIELD - 16 M - DHW

8,203.34

FLAT FIELD - 32 M2 - DHW Thermal solar field composed of flat solar panels. Complete with: • 16 x FTH 2.0 ECO collectors • Base brackets • Series and parallel fittings • 40 metres of insulated stainless-steel hose • Final fittings and junctions • Solar unit with stainless-steel heat exchanger and control unit • Solar expansion vessel • Solar fluid

CODE 8TSI00045

PRODUCT

PRICE (€) 2

FLAT SOLAR FIELD - 32 M - DHW

15,451.51

FLAT FIELD - 48 M2 - DHW Thermal solar field composed of flat solar panels. Complete with: • 24 x FTH 2.0 ECO collectors • Base brackets • Series and parallel fittings • 40 metres of insulated stainless-steel hose • Final fittings and junctions • Solar unit with stainless-steel heat exchanger and control unit • Solar expansion vessel • Solar fluid

CODE 8TSI00050

PRODUCT

PRICE (€) 2

FLAT SOLAR FIELD - 48 M - DHW

www.md-zenit.si +386 31 608 388

21,003.11

PRE-CONFIGURED THERMAL SOLAR FIELDS FOR EXCHANGE WITH HOT WATER THERMAL STORAGE FLAT FIELD - 16 M2 - PUFFER Thermal solar field composed of flat solar panels. Complete with: • 8 x FTH 2.0 ECO collectors • Base brackets • Series and parallel fittings • 40 metres of insulated stainless-steel hose • Final fittings and junctions • Solar unit with heat exchanger • Solar expansion vessel • Solar fluid

CODE 8TSI00055

PRODUCT

PRICE (€) 2

FLAT SOLAR FIELD - 16 M - PUFFER

8,203.34

FLAT FIELD - 32 M2 - PUFFER Thermal solar field composed of flat solar panels. Complete with: • 16 x FTH 2.0 ECO collectors • Base brackets • Series and parallel fittings • 40 metres of insulated stainless-steel hose • Final fittings and junctions • Solar unit with stainless-steel heat exchanger and control unit • Solar expansion vessel • Solar fluid

CODE 8TSI00057

PRODUCT

PRICE (€) 2

FLAT SOLAR FIELD - 32 M - PUFFER

15,285.11

FLAT FIELD - 48 M2 - PUFFER Thermal solar field composed of flat solar panels. Complete with: • 24 x FTH 2.0 ECO collectors • Base brackets • Series and parallel fittings • 40 metres of insulated stainless-steel hose • Final fittings and junctions • Solar unit with stainless-steel heat exchanger and control unit • Solar expansion vessel • Solar fluid

CODE 8TSI00060

PRODUCT

PRICE (€) 2

FLAT SOLAR FIELD - 48 M - PUFFER

www.md-zenit.si +386 31 608 388

20,836.71

GENERAL CONDITIONS OF SALE 1. INTRODUCTION 1.1 These General Conditions shall regulate the contracts for sale or supply of products by THERMICS ENERGIE Srl (hereunder referred to as "the Seller") indicated in the company's catalogues. 1.2 The catalogues do not constitute a binding offer and can be modified at any time. The technical specifications and performance listed in the catalogues are approximate and non-binding on the Seller, who reserves the right to make product modifications at any time. 1.3 Any modification to these conditions shall not be valid unless expressly and specifically accepted in writing by the seller. 1.4 These general conditions are valid as of 01.01.2014. 2. ORDERS AND CONTRACT CLOSING 2.1 Orders must be submitted in writing to the seller, who reserves the right to decide whether or not to accept them. 2.2 The contract is closed at the moment of the Buyer receiving the order confirmation from the Seller. In any case, even in the absence of a written order confirmation, the contract shall be considered closed and subject to these General Sales Conditions if the Buyer accepts the products delivered by the Seller on the basis of the purchase order they have completed. 3. PRICES AND OFFERS 3.1 Product prices are given in the Seller's Catalogue-Price List. 3.2 The prices do not include packaging, transport, insurance, installation and/or assembly, nor any other fees/costs (taxes, duties etc.), except where explicitly stated in the specific conditions. 3.3 Prices indicated in offers are non-binding and are valid for 3 months from the date of the offer, however the seller reserves the right to revoke such offers at its discretion. The seller, in any case, reserves the right to modify valid offers whenever product technology and updates require it. 3.4 Whenever the Seller's list prices should change between the closure of the contract and delivery, the prices are understood to be those in force at the time the order is made. 3.5 Whenever, between the closure of the contract and delivery, the raw materials used by the Seller for product manufacturing should see increases of above 3 %, these changes shall, at the Seller's sole discretion, allow for a unilateral increase of the agreed prices in the above-mentioned amount. 4. PAYMENT 4.1 Payment shall be made on the basis of the agreed sales conditions. 4.2 Deposits and pre-payments shall bear no interest and must be made directly to the Seller, with a bank cheque made payable to THERMICS ENERGIE Srl. 4.3 Where direct payment is provided for, this must be made by bank draft or SWIFT transfer to the bank indicated by the seller, with exchange fixed to the day in which the payment is due. The seller may issue a collection order or draft for the invoice amount, payable on the due date, at the bank indicated by the purchaser, or, failing this, at the Buyer's local bank. 4.4 Whenever payment is provided for upon goods being available, this must occur within 7 days of notification of the same. 4.5 In the event of missed payment, total or partial, interest shall accrue on the unpaid sum pursuant to articles 4 and 5 of Italian Legislative Decree 231/02, without prejudice to the seller's right to request termination of the contract. 4.6 Any partial payment shall not entitle the Buyer to any rights on the goods themselves, and said partial payment shall be held by the Seller as penalty pursuant to point 9.1 below, without prejudice to their right to claim greater damages. 4.7 Payment terms, whatever they may be, are absolute. 4.8 The Seller may immediately suspend execution of any sales contract closed with the Buyer until the latter has paid the amount due in full. 5. TERMINATION CLAUSE 5.1 Notwithstanding the above, whenever payment delays should exceed 60 days from the agreed terms, the sales contract shall be considered legally terminated via written communication by the Seller, declaring that the Seller is making use of this termination clause. 6. DELIVERY TERMS 6.1 The agreed delivery terms shall run from reception of the order confirmation by the Seller and are not absolute, unless expressly otherwise provided for. Delivery terms are calculated in working days, and this cannot be less than five in any case. 6.2 Where advance payment or payment by a financing company is provided for, the delivery terms shall begin on the reception of said payment or approval from the financing company. 6.3 In the event that it is not possible to complete the supply due to force majeure, chance occurrences or other events outside the Seller's control, for example (but not limited to) â&#x20AC;&#x201C; delays or failures in delivery of components by the Seller's suppliers; interruption or suspension of transport services or electricity supply; unavailability or scarcity of raw materials; strikes or industrial action â&#x20AC;&#x201C; the delivery terms shall automatically be considered extended from the date of communication by the Seller of such an occurrence, and for the duration of the same. If a period of 60 (sixty) days should pass from such a notification without the impediment having ceased, either party may rescind from the contract by communicating this in writing by recorded delivery with return receipt.

7. DELIVERY AND RISK TRANSFER 7.1 Risk and responsibility for the purchased products shall pass to the Buyer at the moment of delivery to the transport company, when the goods are loaded onto the vehicles from the Seller's warehouses. 7.2 The choice of shipping company shall be the Seller's, and the date of delivery is that of the issue of the transport documents. 7.3 Risks due to damage, loss or theft of goods during transport are entirely borne by the Buyer. 7.4 The buyer shall perform the required checks on receiving the goods to check that they meet the order specifications in terms of quantity and type. Any nonconformities must be immediately noted on the delivery note. No claims regarding product type or quantity may be made subsequent to arrival of the goods at the Buyer's premises or the location indicated by the same in the order. 7.5 In the event of replacements, the goods must be sent to the Seller within three months from initial delivery, and must be complete and in their original packaging. 8. WARRANTY 8.1 The Seller guarantees its products and components against defects in materials and workmanship which render them unsuitable for the purpose they are designed for or which reduce their value, pursuant to article 1490 et. seq. of the Italian Civil Code. 8.2 The length of the warranty for manufacturing defects is 5 years for collectors and tanks, if they should not respect the requirements of DIN 4757, part 3, and 2 years for all remaining materials and accessories, calculated from the dare of delivery. This warranty shall not, however, apply if the defect is not reported within one week of its discovery, pursuant to article 1495 of the Italian Civil Code. 8.3 The warranty shall not apply in the event that the defect is not ascribable to the Seller, or in the event of a default or non-fulfilment by the Buyer of their obligations, for example (but not limited to): Failure to make a payment. A defect due to one of the following causes rather than a manufacturing or material defect: Damage caused during transport; nonconformity of the installation to applicable legislation or regulations; installation errors; damage due to chance, force majeure, such as fire, extreme weather or other causes not the responsibility of the Seller; tampering or work performed by unauthorised personnel; damage due to anomalies in the electricity network; lack of or incorrect maintenance; irregular use of or failure to observe the instruction manuals; failure to have start-up and commissioning performed by an authorised technical support centre. Normal wear, defects due to lack of correct and diligent custody, corrosion or breakage caused by one of the following: stray currents, corrosiveness of water, incorrectly performed descaling treatments, freezing, lack of water, scale or sludge deposits, acidity, overheating; use of non-original spare parts or parts not authorised by the Seller. 8.4 The warranty applies under the following conditions: installation performed according to best practice by a recognised specialised company, following the up-to-date installation instructions provided with each product; written confirmation has been provided of correct commissioning and periodical checks recommended by the Seller by a specialised company assigned by the same. The seller or its nominee, following notification per point 8.2 above, shall retain the right to perform an inspection of the allegedly defective product in question at the Buyer's premises. 8.5 This warranty is provided free of charge, and parts removed shall become property of the seller once more. Any transport, packaging and labour costs are understood to be the Buyer's responsibility for the period indicated. 9. BUYER DEFAULT 9.1 In the event of a serious default by the Buyer of its obligations to make payment within the predetermined times, to collect the products, or modification of the order is made more than 2 days after reception of the order confirmation, the Seller may retain any payments already made and require payment of a penalty of 20% of the purchase order total; the Buyer shall be required to pay a penalty of 20% of the purchase order total, which shall be charged against any payments already made up to this amount, without prejudice to any right to claim greater damages. For the penalty clause to be valid it is necessary to specify precisely the non-fulfilments which require payment of this penalty, without general or imprecise terms. Check whether there are any other Buyer non-fulfilments which are to be penalised aside from those indicated. 10. JURISDICTION AND VENUE 10.1 The court of Udine, Italy, shall have sole jurisdiction over any dispute regarding the interpretation and execution of this contract, without prejudice to the Seller's right to resort to the Buyer's competent jurisdiction.

www.md-zenit.si +386 31 608 388

THERMICS ENERGIE SRL Via dell’Olmo 37/2 - 33030 Varmo (UD) - Italy Tel. (+39) 0432823600 - Fax. (+39) 0432825847 www. thermics-energie.it | info@thermics-energie.it

Bilje 27 SI – 5292 Renče tel/fax: +386 5 620 25 21 www.md-zenit.si info@md-zenit.si