Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
INTRODUCTION
Welcome to the second edition strukta product guide Easy to navigate including our full product range allowing you the easiest buying experience around...
SALISBURY SP2 7LD
www.strukta.co.uk sales@strukta.co.uk
t. 033 33 21 00 13 f. 033 33 21 00 15
At strukta, we believe in people: from customers & suppliers to colleagues & potential partners therefore we have founded our WHOLE culture on:
PORTSMOUTH PO6 1RU
WILLINGNESS We are prepared to go the extra mile
HONESTY We are open with each other & promise only what we can achieve
OBEDIENCE We are accountable to the organisation & each other
LOYALTY We will not let ourselves or each other down
EXCELLENCE We are driven by a passion to consistently improve
2
Salisbury 01722 414 011
BOURNEMOUTH BH11 8JS
sales@strukta.co.uk
www.strukta.co.uk
CONTENTS GROUNDWORKS Underground Drainage, DPM/DPC’s Tanking Systems & Geotextiles
BRICK RELATED PRODUCTS Vents, Air Bricks, Cavity Closers, Meter Boxes, Cavity Trays & Wall/Frame Ties
BUILDING CHEMICALS Plasticisers, Water Proofers, Adhesives, Expanding Foam, Silicone & Fillers
STEELWORK & LINTELS Steel & Concrete Lintels, Arch Boards, Padstones, Balconies & Staircases
BUILDERS METALWORK Restraint Straps, Joist Hangers, Truss Clips, Angle Brackets & Fixing Band
NAILS Bright/Galvanised Nails, Paslode Products & Aluminium/Copper/Stainless Nails
ROOFING PRODUCTS Breather Membranes, Valley Troughs Lead, Ventilation & Roof Windows
ROOFLINE & RAINWATER PVCu Fascia, Soffit, Guttering, Cast Iron Guttering & Above Ground Soil Pipe
PLASTERING Galvanised, Stainless Steel & Plastic Beads, Mesh, Scrim & Arch Formers
CONTRACTORS EQUIPMENT Site Setup, Clothing & PPE, Site Lighting, Drilling & Cutting, General Hand Tools
SCREWS, BOLTS & FIXINGS Screws, Bolts, Studding, Fixings, Wall Plugs, Screw Cups & Plastic Packers
INTERIOR FINISHINGS Hinges & Ironmongery, Access Panels, Loft Doors, Ladders & Site Protection
INDEX / TERMS & CONDITIONS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
5 23 39 47 73 81 95 117 137 145 179 195 215 3
Introducing our FREE next day delivery service
SWIFT
4
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
5
GROUNDWORKS UNDERGROUND PIPE & COUPLERS
PLAIN END PIPE
110MM SINGLE SOCKET PIPE
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
PPE1103U
Plain End 110mm x 3m
Each
PSS1103U
Single Socket 110mm x 3m
Each
PPE1106U
Plain End 110mm x 6m
Each
PSS1106U
Single Socket 110mm x 6m
Each
PPE1606U
Plain End 160mm x 6m
Each
PSS1606U
Single Socket 160mm x 6m
Each
CODE
DESCRIPTION
Unit Qty
CDS110U
Coupler Double Socket 110mm
Each
CDSS110U
Slip Coupler Double Socket 110mm
Each
CDS160U
Coupler Double Socket 160mm
Each
CSS110U
Coupler Single Socket 110mm
Each
110MM SINGLE SOCKET PERFORATED PIPE
COUPLERS
CODE
DESCRIPTION
Unit Qty
PSSP1106U
Single Socket Perforated 110mm x 6m
Each
DOUBLE SOCKET BENDS
SINGLE SOCKET BENDS
6
CODE
DESCRIPTION
Unit Qty
BDS11015U
110mm 15˚ Double Socket Bend
Each
BDS11030U
110mm 30˚ Double Socket Bend
Each
BDS11045U
110mm 45˚ Double Socket Bend
Each
BDS11090U
110mm 90˚ Double Socket Bend
Each
BDS16015U
160mm 15˚ Double Socket Bend
BDS16030U
CODE
DESCRIPTION
Unit Qty
Each
BSS11015U
15˚ Single Socket Bend
Each
160mm 30˚ Double Socket Bend
Each
BSS11030U
30˚ Single Socket Bend
Each
BDS16045U
160mm 45˚ Double Socket Bend
Each
BSS11045U
45˚ Single Socket Bend
Each
BDS16090U
160mm 90˚ Double Socket Bend
Each
BSS11090U
90˚ Single Socket Bend
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS BENDS, BRANCHES & ADAPTORS
ADJUSTABLE BEND
45° & 90° BRANCHES
FOR MAXIMUM
FLEXIBILTY
CODE
DESCRIPTION
Unit Qty
YDS11045U
45˚ Y Branch Double Socket 110mm
Each
YTS11045U
45˚ Y Branch Triple Socket 110mm
Each
TDS11090U
90˚ T Branch Double Socket 110mm
Each
TTS11090U
90˚ T Branch Triple Socket 110mm
Each
YTS16045U
45˚ Y Branch Triple Socket 160mm
Each
TTS16090U
90˚ T Branch Triple Socket 160mm
Each
CODE
DESCRIPTION
Unit Qty
BDSA110U
0-90˚ Adjustable Bend Double Socket 110mm
Each
FLEXIBLE ADAPTORS
OTHER BENDS
Illustration shows a clay pipe joined to a 110mm plastic pipe using an AF110137 Flexible Adaptor
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
BDSR11090U
90˚ Rest Bend Double Socket 110mm
Each
AF110110
110 / 110mm Straight Adaptor
Each
BLR11045U
45˚ Long Radius Bend Plain End 110mm
Each
AF110137
110mm Multi Application Adaptor
Each
BLR11090U
90˚ Long Radius Bend Plain End 110mm
Each
AF160180
160mm Multi Application Adaptor
Each
AF150150
152 / 162mm Straight Adaptor
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
7
GROUNDWORKS ADAPTORS, PLUGS, FITTINGS & GULLIES
ROUND DOWNPIPE ADAPTOR
LEVEL INVERT ADAPTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
ADRP
Round Rainwater Downpipe Adaptor - PVC
Each
ADUR
Universal Rainwater Downpipe Adaptor - Rubber
Each
ALI160110
160/ 110mm Level Invert Adaptor
Each
PVCu to CLAY ADAPTOR
110mm TEMP SOCKET PLUG
110mm PERM SOCKET PLUG
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
APSUC110
110mm PVCu to Super Clay Adaptor
Each
PST110
110mm Socket Plug
Each
PSP110
110mm Socket Plug
Each
TEMPORARY DRAIN BUNG
SQUARE SOCKET RODDING POINT
OVAL SOCKET RODDING POINT
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
PDT110
110mm Drain Plug
Each
RPSS110
Rodding Point - Square (Socket)
Each
RPOP110
Rodding Point - Oval 110mm
Each
RPOP160
Rodding Point - Oval 160mm
Each
PDT160
160mm Drain Plug
Each
SCREW ACCESS CAP
8
UNIVERSAL DOWNPIPE ADAPTOR
NON RETURN VALVES
CODE
DESCRIPTION
Unit Qty
SCA110
Screw Access Cap
Each
90ยบ SINGLE SOCKET ACCESS BEND
CODE
DESCRIPTION
Unit Qty
VNR110
Non Return Valve 110mm
Each
VNR160
Non Return Valve 160mm
Each
Salisbury 01722 414 011
CODE
DESCRIPTION
Unit Qty
BSSA11090U
90ห Single Socket Access Bend 110mm
Each
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS BOTTLE GULLIES & INSPECTION CHAMBERS
LOW TRAP GULLY
P SOCKET LOW TRAP GULLY
RECTANGULAR HOPPER HEAD
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
GLT
Low Trap Gully
Each
GLTP
P Socket Low Trap Gully
Each
HGRP
Rectangular Hopper Head & Grid 240 x 150mm
Each
SQUARE HOPPER HEAD
CIRCULAR BOTTLE GULLY
SQUARE BOTTLE GULLY
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
HGSS
Square Hopper Head & Grid 150 x 150mm
Each
GBC100
Bottle Gully - Circular (Roddable)
Each
GBR100
Bottle Gully - Square (Roddable)
Each
SQUARE COVER
300mm CHAMBER BASE 45ยบ
CODE
DESCRIPTION
Unit Qty
CCPS300
Square Cover to suit 300mm Chamber 340 x 340mm
Each
300mm CHAMBER RISER
CODE
DESCRIPTION
Unit Qty
BC30045
Chamber Base 300mm Dia. 45ห 270mm High
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
CODE
DESCRIPTION
Unit Qty
RC300200
Chamber Riser 300mm Dia. 200mm High
Each
www.strukta.co.uk
9
GROUNDWORKS MANHOLE COVERS, RISERS & CHAMBER BASES
450mm CHAMBERS Invert Depth (mm)
270
505
740
975
1210
1445
1680
1915
2150
2385
2620
2855
3090
No. Risers Req’d
Base Only
1
2
3
4
5
6
7
8
9
10
11
12
Cover Req’d
430mm opening up to a max of 1200mm
350mm opening up to a max of 3000mm
450mm SEALING RING
450mm SQUARE COVER
450mm CHAMBER RISER
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CCPS450
Square Cover to suit 450mm Chamber 450 x 450mm
Each
CSR450
Chamber Sealing Ring 450mm Dia.
Each
RC450300
Chamber Riser 450mm Dia. 300mm Rise
Each
450mm COMPOSITE COVER
450mm CHAMBER BASE
CODE
DESCRIPTION
Unit Qty
CCC450
Round Cover 450mm Dia. Composite (Screw Down)
Each
450mm PLASTIC COVER
CODE CCPR450
10
DESCRIPTION Round Cover 450mm Dia. Plastic (Screw Down)
Unit Qty Each
CODE
DESCRIPTION
Unit Qty
BC450110
Chamber Base 450mm Dia. 110mm
Each
BC450160
Chamber Base 450mm Dia. 160mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS INSTALLATION GUIDE
Installation Guide We recommend that reference should be made to the appropriate Codes of Practice for Underground Drainage Systems.
Trench Detail and Backfill Material The trench should be constructed 300mm wider than the outside diameter of the pipe to be installed. Where the ‘as dug’ material is suitable, the bottom of the trenches may be trimmed to form a pipe bed. The material can also be used as sidefill and backfill. Imported granular backfill materials such as pea shingle used in accordance with the recommendations of BS5955 Part 6: 1980 Appendix A, having a nominal particle size not exceeding 10mm, should be used as required up to and over the crown of the pipe. When this has been achieved the ‘as dug’ material can be replaced into the trench. Once 300mm of material has been replaced, mechanical compaction can commence.
Testing Testing of all drainage installations should be carried out in accordance with the requirements of the appropriate approving authority, using either air or water testing. Reference should be made to current editions of Building Regulations (Approved Document ‘H’) BS EN 752:1997 and BS EN 1610:1998. Where drainage appears inside buildings BS EN 12056 should also be consulted.
Pipe End Preparation When cutting pipes ensure that all ends are chamfered and are free from swarf, grit and dirt.
Ring Seal Joints The Ring Seal Joint acts both as a seal and expansion joint. The following sequence should be adhered to:
• • • • •
Check that all ring seal sockets are properly located in their recessed position Ensure spigots and ring seal sockets are dry, clean and free from grit and dirt
Any unused side connections should be sealed with a plain plug. Should bends be required to change direction these should be sited at the point of entry to the chambers. Side branches of the chamber should not be used to change direction of the main flow, as a self-cleansing flow through the chamber cannot be guaranteed. Intermediate depths can be achieved by cutting a riser to the level required. The frame and cover should also be adjusted to suit the level of the adjacent ground and surrounded with a minimum of 50mm of concrete.
Large Inspection Chamber (LIC) The large diameter of the riser shafts of inspection chambers enables them to be installed to a maximum depth to invert of 1200mm when used in conjunction with a 450mm opening cover and frame. The chamber complies with Approved Document H of the Building Regulations 2000 by using a 350mm reduced opening cover and frame for installations over 1200mm up to a maximum of 3000mm invert depth. The chamber is installed on a suitable bed dependent on the quality of the trench and backfill materials. Backfilling is continued up to approximately 50mm of the finished ground level. The frame is securely fixed through the wall of the chamber at the set location points using self-tapping screws. The cover is then secured to the frame with the captive screws. It is impossible for the cover to be removed without undoing the screws. The frame and cover are placed on a bed of concrete around the top of the uppermost shaft and adjusted to the finished level. Intermediate depths can be achieved by cutting the riser at 60mm intervals; the frame also has 65mm of telescopic adjustment. Any unused side connections should be sealed with a plain plug.
Lubricate all ring seal fittings. This will allow for a fast and efficient connection
Should bends be required to change direction these should be sited at the point of entry to the chamber.
Ensure all pipes and fittings are in the correct position
Side branches of the chamber should not be used to change the direction of the main flow as a self-cleansing flow through the chamber cannot be guaranteed.
Insert pipe fully into the socket, then withdraw pipe by a minimum of 12mm - this will allow for expansion
Access and Rodding Points Access is very important on all installations for testing, inspection and removal of any blockage or debris. Rodding in both directions can be achieved by using a Mini Access Chamber (MAC) or 450mm Large Inspection Chamber in conjunction with access fittings. Rodding points are more usually used in storm water drainage systems where the rodding point is located at the head of the drain run connection to a chamber, and being no further than 22 metres away from the chamber. The rodding point should be enclosed in a concrete surround to provide support and to ensure that it does not become mislaid at ground level.
Inspection Chambers Mini Access Chamber (MAC) A Mini Access Chamber has a relatively narrow riser shaft, and is used for inspecting, clearing and rodding a drain line. The narrowness of the riser shaft permits limited clearing and rodding to a maximum depth to invert of 600mm.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
11
GROUNDWORKS MANHOLE COVERS & DRAINAGE CHANNELS
GALVANISED MANHOLE COVERS
IRON MANHOLE COVERS
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CMG60455
Galv. 600 x 450mm Pedestrian 5 Ton
Each
CCCS4545
B125 Ductile Iron 12 Ton 450 x 450mm
Each
CS4545
Screed Cover 450 x 450
Each
CMG604510
Galv. 600 x 450mm Car 10 Ton
Each
CCSR4560
B125 Ductile Iron 12 Ton 600 x 450mm
Each
CS6045
Screed Cover 600 x 450
Each
CS6060
Screed Cover 600 x 600
Each
BLOCK PAVIOR COVER
IRON MANHOLE COVERS
POLYPROPYLENE DRAIN CHANNEL
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CBP3030
Block Pavior Cover 300 x 300 x 80mm
Each
CSD3030
Double Seal Screed Cover 300 x 300 x 50mm
Each
CODE
DESCRIPTION
Unit Qty
CBP4545
Block Pavior Cover 450 x 450 x 80mm
Each
CSD6045
Double Seal Screed Cover 600 x 450 x 50mm
Each
CDP1
Polypropylene Drainage Channel 1m
Each
CBP6045
Block Pavior Cover 600 x 450 x 80mm
Each
CSD6060
Double Seal Screed Cover 600 x 600 x 50mm
Each
CBP6060
Block Pavior Cover 600 x 600 x 80mm
Each
NEED BESPOKE CHANNELS? CALL OUR SALES OFFICE
END CAP for CDP1
12
SCREED COVERS 50mm DEPTH
CHANNEL JUNCTION/CONNECTOR
POLYPROPYLENE END OUTLET
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CDPEC
Polypropylene End Cap
Each
CDCQ
Channel Junction / Quad Connector
Each
CDPEO
Polypropylene End Outlet
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS DRAINAGE CHANNELS, LUBRICANTS & TWINWALL DUCTING
POLYPROPYLENE SUMP
POLYMER CONCRETE CHANNEL
POLYMER CONCRETE SUMP
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CDPS
Polypropylene Sump (Slimline)
Each
CDC1
Polymer Concrete Domestic Duty Channel 1m
Each
CDCS
Drainage Channel Polymer Concrete Sump Unit
Each
DRAINAGE CHANNEL OFFSET SLOT
DRAINAGE CHANNEL CAST IRON
DRAIN TESTING KIT
NEW
NEW
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CDT01
Drainage Channel Offset Brick Slot 1m
Each
CDCI01
Drainage Channel Cast Iron 1m
Each
DTK
Complete Kit
Each
SILICONE SPRAY
LUBRICANT GEL
DRAIN TRACING DYE
NEW
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
LSS
Silicone Spray
Each
LG800
Lubricant Gel
Each
DTD200
Fluorescent Dye 200g
Each
TWINWALL DUCTING
A strong flexible ducting for underground utilities. Supplied in 50m coils with a smooth bore and draw string.
CODE
DESCRIPTION
Unit Qty
DT6350BL
Twinwall Ducting Blue 63mm x 50m
Each
DT6350BK
Twinwall Ducting Black 63mm x 50m
Each
CDT63
Twinwall Ducting Coupler 63mm
Each
YDT110
Twinwall Ducting Branch 110mm
Each
DT11050BK
Twinwall Ducting Black 110mm x 50m
Each
CDT110
Twinwall Ducting Coupler 110mm
Each
DT11050BL
Twinwall Ducting Blue 110mm x 50m
Each
DTP6350YE
Twinwall Ducting Perforated Yellow 63mm x 50m
Each
DTP11050BK
Twinwall Ducting Perforated Black 110mm x 50m
Each
DT16025BK
Twinwall Ducting Black 160mm x 25m
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
13
GROUNDWORKS POLYTHENE DUCTING & PIPE FITTINGS
POLYTHENE DUCTING
DT4050BK
CODE
DESCRIPTION
Unit Qty
DP32100
Polythene Ducting 32/37mm x 100m
Each
DP38100
Polythene Ducting 38/45mm x 100m
Each
DT4050BK
Twinwall Ducting Black 40mm x 50m
Each
DP32100
DUCTING ACCESSORIES
14
CODE
DESCRIPTION
Unit Qty
CET25100
Earth Tracer Cable
Each
TWUE
Underground Warning Tape - Electricity
Each
TWUG
Underground Warning Tape - Gas
Each
TWUW
Underground Warning Tape - Water
Each
TWMUE
Underground Tracer Mesh - Electricity
Each
TWMUG
Underground Tracer Mesh - Gas
Each
TWMUW
Underground Tracer Mesh - Water
Each
TWUE
TWUW
TWMUW
PIPE LINERS
PIPE COUPLINGS
90ยบ ELBOWS
CODE: PL20 PL25 PL32 DESC: 20mm 25mm 32mm UNIT: Each Each Each
CODE: PC20 PC25 PC32 DESC: 20mm 25mm 32mm UNIT: Each Each Each
CODE: PE9020 PE9025 PE9032 DESC: 20mm 25mm 32mm UNIT: Each Each Each
90ยบ TEES
REDUCING COUPLINGS
CODE: PT20 PT25 PT32 DESC: 20mm 25mm 32mm UNIT: Each Each Each
CODE: PRC2520 PRC3225 PRC5032 PRC5025 DESC: 25-20mm 32-25mm 50-32mm 50-25mm UNIT: Each Each Each Each
REDUCING INSERTS
90ยบ REDUCING TEE
PLASTIC STOPCOCK
CODE: PRI3220 PRI5032 DESC: 32x20mm 50x32mm UNIT: Each Each
CODE: PRT252025 PRT322532 DESC: 25x20x25mm 32x25x32mm UNIT: Each Each
CODE: PSP20 PSP25 PSP32 DESC: 20mm 25mm 32mm UNIT: Each Each Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS MDPE PIPE, BARRIER PIPE & FITTINGS
WALL PLATE ELBOW
BRASS TAP 3/4”
STOP END
CODE: PWPE25 DESC: 25mm x 3/4” UNIT: Each
CODE: PTB34 DESC: Brass Tap 3/4” UNIT: Each
CODE: PSE20 PSE25 PSE32 DESC: 20mm 25mm 32mm UNIT: Each Each Each
COPPER TO MDPE ADAPTOR
STOP TAP CHAMBER
CODE: PACP1620 PACP1625 PACP2525 DESC: 16-20mm 16-25mm 25-25mm UNIT: Each Each Each
CODE: PCCL DESC: Stop Tap Chamber Handle Lid UNIT: Each
MDPE WATER PIPE CODE
DESCRIPTION
Unit Qty
PW2025
Water Pipe 20mm x 25m
Each
PW2525
Water Pipe 25mm x 25m
Each
PW3225
Water Pipe 32mm x 25m
Each
PW2050
Water Pipe 20mm x 50m
Each
PW2550
Water Pipe 25mm x 50m
Each
PW3250
Water Pipe 32mm x 50m
Each
PW20100
Water Pipe 20mm x 100m
Each
PW25100
Water Pipe 25mm x 100m
Each
PW32100
Water Pipe 32mm x 100m
Each
CODE
DESCRIPTION
Unit Qty
PG2550
Gas Pipe 25mm x 50m
Each
PW2025
PG2550
Barrier Pipe – for contaminated sites A composite, multi-layer product for use in service pipe installations that transport potable water. it is available in 25, 32 and 63mm Our barrier pipe is specifically designed for use in areas of contaminated ground. These are typically urban brownfield sites under development where there are known contaminants in the ground. Such sites would normally exclude the use of conventional plastic pipe products and require the use of specialist protected barrier products.
NEED BARRIER PIPE?
CALL OUR SALES OFFICE
This Barrier Pipe is multi-layered, and incorporates an aluminium barrier layer. This is sandwiched between two layers of conventional polyethylene.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
15
GROUNDWORKS DRAINAGE CRATES & GEOTEXTILE MEMBRANE Polystorm modular geocellular structures can be used for the control and management of surface water. Polystorm is unique in that it has been designed to withstand vertical loads of up to 40 tonnes which makes the perfect solution for attenuation or soakaway applications in light trafficked areas. Polystorm modular crates can be assembled together to form a structure of any shape or size to hold water either from roofs and gutters or surface drains.
Clip For connecting cells together horizontally
Polystorm modular cell
Shear connector For connecting cells together vertically
To meet Building Regulations, Crates must be wrapped in non-woven Geotextile membrane, available below.
Pipe location connection
DRAINAGE CRATES CODE
DESCRIPTION
Unit Qty
CDU
Drainage Crate Universal 0.2m3
Each
400mm
Designed for use in light traffic applications with a load bearing capacity of 40 Tonnes 1000mm
500mm
GEOTEXTILE MEMBRANE CODE
DESCRIPTION
Unit Qty
MGN250
Geotextile Membrane 2 x 50m Woven Black
Roll
MGN45100
Geotextile Membrane 4.5 x 100m Non-Woven White
Roll
MGW45100
Geotextile Membrane 4.5 x 100m Woven Black
Roll
A non-woven geotextile membrane for ground stabilisation and drainage applications
16
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS TYING WIRE, GLOVES & SAFETY GLASSES
BLACK ANNEALED TYING WIRE
CODE WTB16
DESCRIPTION Black Annealed, Mini Reel - 1.6mm 1Kg
GALVANISED TYING WIRE
Unit Qty Reel
WIRE TIE TOOL
DOUBLE LOOP TIES 200mm
CODE
DESCRIPTION
Unit Qty
WTG16
Galv, Mini Reel-1.2mm 1Kg
Reel
WTG20
Galv, Mini Reel 1.2mm 2kg
Reel
CHICKEN WIRE 50m
CODE
DESCRIPTION
Unit Qty
TWL200
Double Loop Reinforcing Ties 200mm
1000
STRIKE RELEASE OIL 5L
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
TWT
Wire Tie Tool for use with TWL200 reinforcing Ties
Each
MWG0950
Galvanised Chicken Wire 0.9 x 50m
Roll
OSR5
Strike Release Oil 5L
5L
BUILDERS GLOVES
SAFETY GLASSES
CODE
DESCRIPTION
Qty
SGBL
Builders Gloves - L
Pair
SGBXL
Builders Gloves - XL
Pair
REINFORCING MESH SPACER
CODE
DESCRIPTION
Unit Qty
SCS
Wrap Around Safety Glasses (Clear)
Pair
DID YOU KNOW...
CODE
DESCRIPTION
Unit
SGP4050
Plastic Reinforcing Mesh Spacer 40/50mm
Pk 200
SGP6575
Plastic Reinforcing Mesh Spacer 65/75mm
Pk 100
SGP90100
Plastic Reinforcing Mesh Spacer 90/100mm
Pk 100
strukta supply steel reinforcing mesh, cut & bent re-bar, holding down bolts and form work accessories
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
17
GROUNDWORKS BUILDERS POLYTHENE & TANKING MEMBRANE
CLEAR BUILDERS POLYTHENE CODE
DESCRIPTION
Unit Qty
PSL425050
Temporary Protection Polythene 4 x 25m
Roll
PSM425125
Vapour Barrier Polythene 4 x 25m 125mu/500g
Roll
PSH425200
Heavy Duty Clear Polythene 4 x 25m 200mu/800g
Roll
PSH425250
Heavy Duty Clear Polythene 4 x 25m 250mu/1000g
Roll
UP TO
250mu 1000g
HEAVY DUTY
DAMP PROOF MEMBRANE CODE
DESCRIPTION
Unit Qty
DPM425300
Damp Proof Membrane 4 x 25m 300mu/1200g
Roll
DPM4125500
Damp Proof Membrane 4 x 12.5m 500mu/2000g
Roll
TJM100
Membrane Jointing Tape 100mm x 33m
Roll
LIQUID BITUMEN Release film
UP TO
Polymer modified bitumen (Self Adhesive)
2 Square Mtrs
COVERAGE
A liquid rubber enriched bitumen emulsion which provides a highly effective damp proof membrane for floors. Also acts as a water proofer for walls, above ground structures and foundations. Coverage: 1m2-2m2 per litre
High density polythene core Polymer modified bitumen (Self Adhesive)
CODE
DESCRIPTION
Unit Qty
MLB05
Liquid Bitumen 5L
5L
MLB25
Liquid Bitumen 25L
25L
SMALL TAR BRUSH
18
Thin polythene layer (dispersible by heat application)
SELF ADHESIVE TANKING MEMBRANE
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
MTSA120
Self Adhesive Tanking Membrane 1x20m
Each
BTS
Small Tar Brush
Each
MTP05
Self Adhesive Tanking Membrane 5L
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS POLYTHENE, DPM, DPC & TANKING MEMBRANE
POLYTHENE DAMP PROOF COURSE CODE
DESCRIPTION
Unit Qty
DPCP100
Polythene Damp Proofing Course - 100mm x 30m
Roll
DPCP112
Polythene Damp Proofing Course - 112mm x 30m
Roll
DPCP150
Polythene Damp Proofing Course - 150mm x 30m
Roll
DPCP225
Polythene Damp Proofing Course - 225mm x 30m
Roll
DPCP300
Polythene Damp Proofing Course - 300mm x 30m
Roll
DPCP450
Polythene Damp Proofing Course - 450mm x 30m
Roll
DPCP600
Polythene Damp Proofing Course - 600mm x 30m
Roll
DPCP900
Polythene Damp Proofing Course - 900mm x 30m
Roll
A black polythene DPC manufactured to BS 6515. Suitable for use in vertical and horizontal applications on single and two story buildings.
POLYMERIC HOUSING GRADE DPC CODE
DESCRIPTION
Unit Qty
DPCHG100
Housing Grade DPC 100mm x 20m
Roll
DPCHG112
Housing Grade DPC 112mm x 20m
Roll
DPCHG150
Housing Grade DPC 150mm x 20m
Roll
DPCHG225
Housing Grade DPC 225mm x 20m
Roll
DPCHG300
Housing Grade DPC 300mm x 20m
Roll
DPCHG450
Housing Grade DPC 450mm x 20m
Roll
DPCHG600
Housing Grade DPC 600mm x 20m
Roll Housing grade DPC is made from Co-Polymer thermoplastic CPT and contains no pitch or bitumen or PVC. This DPC out performs all other polythene based DPC’s. Suitable for use in domestic and residential construction up to three storeys. Strong and puncture resistant.
POLYMERIC HIGH PERFORMANCE DPC CODE
DESCRIPTION
Unit Qty
DPCHP100
High Performance DPC 100mm x 20m
Roll
DPCHP112
High Performance DPC 112mm x 20m
Roll
DPCHP150
High Performance DPC 150mm x 20m
Roll
DPCHP225
High Performance DPC 225mm x 20m
Roll
DPCHP300
High Performance DPC 300mm x 20m
Roll
DPCHP450
High Performance DPC 450mm x 20m
Roll
DPCHP600
High Performance DPC 600mm x 20m
Roll
DPCHP700
High Performance DPC 700mm x 20m
Roll
DPCHP900
High Performance DPC 900mm x 20m
Roll
DPCHP1000
High Performance DPC 1000mm x 20m
Roll
Portsmouth 023 92 385 656
Zedex DPC is made from Co-Polymer thermoplastic CPT and contains no pitch or bitumen or PVC. This DPC out performs all other polythene based DPC’s. Suitable for use in domestic and residential construction up to three storeys. Strong and puncture resistant. Is compatible with Visqueen gas system.
sales@strukta.co.uk
www.strukta.co.uk
19
GROUNDWORKS PRE-FORMED DPC & GAS BARRIER SYSTEMS
PRE-FORMED DPC CODE
DESCRIPTION
Unit Qty
DCLU102165
Cross Cavity DPC Change of Level Unit 100x215x65mm
Each
DCU901021
Cross Cavity DPC Int/Ext Corner Unit 90º 100 x 215mm
Each
DCU131021
Cross Cavity DPC Int/Ext Corner Unit 135º 100x215mm
Each
DCU901015
Cross Cavity DPC Int/Ext Corner Unit 90º 100x150mm
Each
A range of pre-formed components to allow complete horizontal cavity tray system to be formed. Please specify 225 or 150mm rise and cavity width when ordering
GAS BARRIER SYSTEMS (METHANE, CO2 & RADON)
20
CODE
DESCRIPTION
Unit Qty
DPCGR600
Gas Resistant DPC - Foil Backed 600mm x 30m
Roll
DPCGR700
Gas Resistant DPC - Foil Backed 700mm x 30m
Roll
DPMGR2025
Gas Resistant Membrane Blue 2.0 x 25m (50m²)
Roll
TB1005
Double Sided Butyl Jointing Tape 50mm x 10m
Roll
TB1510
Double Sided Butyl Jointing Tape 100mm x 115m
Roll
TLF5075
Foil Backed Girth Lap Tape 75mm x 50m
Roll
GBTH06
Top Hats for Pipes (Water) 60mm Dia.
Each
GBTH11
Top Hats for Pipes (Drainage) 110mm Dia.
Each
GBTH13
Top Hats for Pipes (Drainage) 135mm Dia.
Each
GBTH16
Top Hats for Pipes (Drainage) 160mm Dia.
Each
GBTHJC
Top Hat Jubilee Clips (Spare)
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
GROUNDWORKS SPECIFYING GUIDE
Easy Specify Guide
Take the guesswork out of estimating and avoid unnecessary over-ordering Typical installation
Estimating - Gas Barrier System External Wall Perimeter (m) =
metres
Internal Wall Perimeter (m) =
metres
GRDPC 600 / 700 =
External Wall Perimeter÷ 30*
rolls
Zedex 450mm DPC =
External Wall Perimeter÷ 20*
rolls
Double Sided Butyl Tape 50mm x 10m =
Perimeter÷ 10
rolls
Double Sided Butyl Tape 100mm x 15m =
2 rolls per plot (for corners & top hats)
rolls
GRDPC 600 =
Internal Wall Perimeter÷ 30*
rolls
Gas Resistant Membrane (GRDPM) 1.6m x 30m =
Total Plot (m2), Length x Width + 10% ÷ 48
rolls**
**1 roll GRDPM needs
70m Double Sided Butyl Tape 50mm x 10m 70m Foil Backed Lap Tape 75mm x 50m
rolls rolls
1. How many 60mm/110mm Top Hats required?
No.
2. Are pre-formed Corner Cloaks required?
Yes/No
*Round up figure
Jointing Detail Visqueen Gas Barrier 150mm Visqueen Jointing Tape
TANKING MEMBRANE KIT CODE
DESCRIPTION
Unit Qty
MTB220KIT
Baseline 8 Basement Tanking Membrane Kit
Each
MTBPS75
Baseline 8 Brick & Plug Seals 75mm
200
MTBM2010
Internal Vertical Tanking Plus Plaster Mesh 2 x 10m
Each
MTBM2020
Internal Vertical Tanking Plus Plaster Mesh 2 x 20m
Each
CTS25
Tanking Slurry 25kg
Each
TPB312
Tanking Protection Board 3mm x 1m x 2m
Each
Visqueen Double Sided Tape
Visqueen GR DPC
• A waterproof tanking membrane kit for waterproofing basement walls and floors.
• This basement waterproofing membrane enables
direct drywall lining or floor laying. Tanking kit includes fixing plugs, butyl rubber waterproof tapes and seals.
• BS8102: 1990 - Type C compliant membrane -
waterproofing below ground - Grade 3 or 4 dry environment.
• Membrane roll size 2.0m x 20m (40m2). • Density: 0.5 Kg/m2. • Load bearing capacity: 120 kN/m2. • Cavity drain / ventilation capacity 5.3 l/m2.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
21
GROUNDWORKS RAINWATER HARVESTING
Waste Water Treatment Solutions • 15 year warranty • Stability tested to European standards
• Cost Effective Solution • Simple Installation • Low Maintenance • Established Concept
Full range of tanks and associated products available including septic tanks and cesspools
DUOBLOCK GRASS PROTECTION SYSTEM CODE
DESCRIPTION
Unit Qty
MGSP11
Interlocking Ground Stabilisation Mats 1m x 1m
Roll
Benefits
Applications
• 90% surface area available for infill
• Overspill car parking
• Reduces surface water runoff
• Emergency access and service roads
• Increases water Filtration
• Caravan hardstanding
• Interconnecting cell walls
• Verge hardening
• High Load Performance
• Service Roads
• Unique surface design for greater aesthetic appeal
• Pedestrian walkways and towpaths
• Positive interlock System
• Helipads
• Bridle ways • Golf course pathways / Tee reinforcement
22
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BRICK RELATED PRODUCTS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
23
BRICK RELATED PRODUCTS VENTS, AIRBRICKS & CAVITY SLEEVES
CRANKED UNDERFLOOR TELESCOPIC VENTS
EV93
CODE
DESCRIPTION
Unit Qty
VP93
Cranked Underfloor Telescopic Vent
Each
AD93
Duct Adaptor to 110mm Round Pipe
Each
EV93
Cranked Underfloor Vent Vertical Extension
Each
Our telescopic vent adjusts between 3 and 5 brick courses. Add the vertical extension piece to elevate it a further two brick courses
VP93
AD93
PLASTIC AIRBRICKS CODE
DESCRIPTION
Unit Qty
ABP93TR
Plastic Airbrick Terracotta 9 x 3"
Each
ABP93BU
Plastic Airbrick Buff 9 x 3"
Each
ABP93GY
Plastic Airbrick Grey 9 x 3"
Each
ABP93BK
Plastic Airbrick Black 9 x 3"
Each
ABP93BR
Plastic Airbrick Brown 9 x 3"
Each
ABP93WH
Plastic Airbrick White 9 x 3”
Each
Economical Lightweight
Alternative A robust polypropylene airbrick, used for underfloor ventilation. Can be clipped together to form 9” x 6” and 9” x 9” sizes. Airflow 6170mm2. Can be used with a cavity sleeve and telescopic vent. Box quantity 20.
CLAY AIRBRICKS CODE
DESCRIPTION
Unit Qty
ABC93TR
Clay Airbrick Terracotta 9 x 3"
Each
ABC96TR
Clay Airbrick Terracotta 9 x 6"
Each
ABC99TR
Clay Airbrick Terracotta 9 x 9"
Each
ABC93BU
Clay Airbrick Buff 9 x 3"
Each
ABC96BU
Clay Airbrick Buff 9 x 6"
Each
ABC99BU
Clay Airbrick Buff 9 x 9"
Each
ABC99TR ABC96BU
ABC93TR
PLASTIC CAVITY SLEEVES CODE
DESCRIPTION
Unit Qty
CSP93
Plastic Cavity Sleeve 9 x 3"
Each
CSP96
Plastic Cavity Sleeve 9 x 6"
Each
CSP99
Plastic Cavity Sleeve 9 x 9"
Each
CSP96 CSP99
CSP93
CLAY CAVITY SLEEVES
24
CODE
DESCRIPTION
Unit Qty
CSC93
Clay Cavity Sleeve 9 x 3"
Each
CSC96
Clay Cavity Sleeve 9 x 6"
Each
CSC99
Clay Cavity Sleeve 9 x 9"
Each
Salisbury 01722 414 011
CSC93
sales@strukta.co.uk
CSC96
CSC99
www.strukta.co.uk
BRICK RELATED PRODUCTS VENTS, AIRBRICKS & CAVITY TRAYS
ANTI-DRAUGHT VENTS CODE
DESCRIPTION
Unit Qty
BHVST96
Anti-Draught Vent 9 x 6" Terracotta Airbrick
Each
BHVSB96
Anti-Draught Vent 9 x 6� Buff Airbrick
Each
WEEP VENTS
BHVST96
CODE
DESCRIPTION
Unit Qty
VWCL
Weep Vent Clear
Each
VWTR
Weep Vent Terracotta
Each
VWBR
Weep Vent Brown
Each
VWBU
Weep Vent Buff
Each
VWBK
Weep Vent Black
Each
VWWH
Weep Vent White
Each
VWGR
Weep Vent Grey
Each
VWCBU
Weep Vent Concealed Buff
Each
VWTTR
Weep Vent Tunnel Terracotta
Each
VWTCL
Weep Vent Tunnel Clear
Each
VWTBR
Weep Vent Tunnel Brown
Each
VWTBU
Weep Vent Tunnel Buff
Each
VWTBK
Weep Vent Tunnel Black
Each
VWTWH
Weep Vent Tunnel White
Each
VWTGR
Weep Vent Tunnel Grey
Each
VWACL
Weep Vent Adjustable Clear
Each
VWATR
Weep Vent Adjustable Terracotta
Each
VWABU
Weep Vent Adjustable Buff
Each
VWAGR
Weep Vent Adjustable Grey
Each
LSE
Lintel Stop End
Each
VWBK
VWABU
STEPPED CAVITY TRAYS CODE
DESCRIPTION
Unit Qty
TCSL
Cavity Tray Stepped Intermediate Left Hand
Each
TCSR
Cavity Tray Stepped Intermediate Right Hand
Each
TCSCL
Cavity Tray Stepped Catchment Left Hand
Each
TCSCR
Cavity Tray Stepped Catchment Right hand
Each
TCSRI
Cavity Tray Stepped Ridge
Each
TCU
Cavity Tray Universal Folding
Each
VWTWH
LSE
VWTWH
TCSRI
TCSL
TCSR
TCSCL
Portsmouth 023 92 385 656
TCSCR
sales@strukta.co.uk
www.strukta.co.uk
25
BRICK RELATED PRODUCTS LEAD ABUTMENT CAVITY TRAYS
LEADED ABUTMENT CAVITY TRAYS CALCULATING QUANTITIES OF CAVITY TRAYS STEPPED CAVITY TRAYS Stepped Cavity Trays are used when a pitched roof abuts a cavity wall. To calculate the quantity of trays required to cover a section of roof abutment one of three measurements must be determined, either the vertical height or the sloping or horizontal length of the abutment. If the vertical height is measured, simply divide this distance by the coursing height of the material being used for construction. e.g. If the vertical height is 1.5m and the wall is standard 75mm brick coursing (NB 75mm = 0.075m) the equation would be 1.5 ÷ 0.075 = 20. Therefore 20 No. cavity trays are required. If the sloping or horizontal distance has been measured, the tables shown below should be used to convert the distance (measured in metres) into the quantity of cavity trays. Take great care to select the correct table and the appropriate column which relates to the coursing height of the wall construction and the pitch of the abutting roof. e.g. If the sloping measurement is 2.5m, at a pitch of 30º, with a 75mm brick coursing height the equation would be 2.5 x 6.7 = 16.75. This would be rounded up, so 17 No. cavity trays would be required.
HORIZONTAL CAVITY TRAYS Calculating the quantity of horizontal cavity trays required is reasonably straightforward. Simply measure the overall width of the abutting roof, or width of the area where cavity tray protection is required, and divide this measurement by the effective length of the cavity tray component which you have chosen to use.
26
e.g. If you have an abutment 2.5m in width and you are using a horizontal tray, divide 2.5m by the effective length of the tray, which in this case is 440mm or 0.44m. This gives an answer of 5.68 which would be rounded up to 6 No.
High performance cavity tray for abutments with preattached lead flashing. Available short lead for slates and long lead for profiled tiles. (Please state roof pitch when ordering)
Sloping Measurement
Horizontal Measurement
Coursing Height Roof Pitch 75mm 150mm 200mm 225mm Brick Stone Block Block 10º 2.3 1.2 0.9 0.8 12.5º 2.9 1.4 1.1 1.0 15º 3.5 1.7 1.3 1.2 17.5º 4.0 2.0 1.5 1.3 20º 4.6 2.3 1.7 1.5 22.5º 5.1 2.6 1.9 1.7 25º 5.6 2.8 2.1 1.9 27.5º 6.2 3.1 2.3 2.1 30º 6.7 3.3 2.5 2.2 32.5º 7.2 3.6 2.7 2.4 35º 7.7 3.8 2.9 2.6 37.5º 8.1 4.1 3.0 2.7 40º 8.6 4.3 3.2 2.9 42.5º 9.0 4.5 3.4 3.0 45º 9.4 4.7 3.5 3.1
Coursing Height Roof Pitch 75mm 150mm 200mm 225mm Brick Stone Block Block 10º 2.4 1.2 0.9 0.8 12.5º 3.0 1.5 1.1 1.0 15º 3.6 1.8 1.3 1.2 17.5º 4.2 2.1 1.6 1.4 20º 4.9 2.4 1.8 1.6 22.5º 5.5 2.8 2.1 1.8 25º 6.2 3.1 2.3 2.1 27.5º 7.0 3.5 2.6 2.3 30º 7.7 3.9 2.9 2.6 32.5º 8.5 4.3 3.2 2.8 35º 9.3 4.7 3.5 3.1 37.5º 10.2 5.1 3.8 3.4 40º 11.2 5.6 4.2 3.7 42.5º 12.2 6.1 4.6 4.1 45º 13.3 6.7 5.0 4.4
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BRICK RELATED PRODUCTS CAVITY TRAYS, CLOSERS & WINDOW FORMERS
TCHIR TCHIL TCHS
TCHER TCHEL
HORIZONTAL CAVITY TRAYS
RIGID CAVITY CLOSERS
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
TCHS
Cavity Tray Horizontal Straight 457mm
Each
CC2450
Rigid Cavity Closer 50mm x 2.4m
Each
TCHEL
Cavity Tray Horizontal Left Hand External Corner
Each
CC2475
Rigid Cavity Closer 75mm x 2.4m
Each
TCHER
Cavity Tray Horizontal Right Hand External Corner
Each
CC2490
Rigid Cavity Closer 90mm x 2.4m
Each
TCHIL
Cavity Tray Horizontal Left Hand Internal Corner
Each
CC24100
Rigid Cavity Closer 100mm x 2.4m
Each
TCHIR
Cavity Tray Horizontal Right Hand Internal Corner
Each
CC24125
Rigid Cavity Closer 125mm x 2.4m
Each
CC24150
Rigid Cavity Closer 150mm x 2.4m
Each
Achieve perfectly fitted windows... A robust window installation system manufactured from high quality PVCu, it’s a window former, locator and cavity closer. Delivered to site in ‘made up’ frames saving you time and money!
EVERY TIME! FREE SCHEDULING SERVICE
Please call our sales team, or forward your plans by post or Email for a FREE ‘take off’
• Acts as a brickwork guide. • Closes off the cavity at window and door apertures. • Eliminates moisture penetration around window and door reveals.
• Reduces thermal bridging in • • •
accordance with building regulation (PART L). Accepts snap-in window fixings. Accepts timber, aluminium and PVCu windows. Available for cavity widths 50 – 250mm.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
27
BRICK RELATED PRODUCTS FLAMSTOP CAVITY FIRE BARRIER
CAVITY STOP-SOCK FIRE BARRIER Provides one hour of fire protection in cavities. Compression fitted within cavity both vertically and horizontally. Supplied in 1.2m lengths
FLAMSTOP - 50mm CAVITY
FLAMSTOP - 100-130mm CAVITY
15 PER PACK
40 PER PACK
FLAMSTOP - 150mm CAVITY
12 PER PACK
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SSC65
Flamstop 65 x 65 x 1200mm 50mm cavity
Each
SSC100130
Flamstop 100-130mm Cavity Barrier
Each
SSC165
Flamstop 165 x 90 x 1200mm 150mm cavity
Each
FLAMSTOP - 75-110mm CAVITY The Multistop is suitable for all applications timber frame and standard masonry work
20 PER PACK
CODE
DESCRIPTION
Unit Qty
SSC75110
Flamstop Multi Universal Firesock 75-110mm
Each
300x100mm PARTY WALL BARRIER
10 PER PACK
Flamstop is designed to prevent fire penetration, aid the reduction of sound transmission and help maintain the thermal integrity of the insulation requirements under Approved Document L1A FOR England and Wales October 2010 through wall cavity in both masonry / block and brick / timber frame & steel cavity wall structures. The product is used around all apertures as well as at party wall junctions and floor levels in all cavities.
i
Flamstop is suitable for all applications, timber frame and standard masonry work.
300x165mm PARTY WALL BARRIER
300x100mm PARTY WALL BARRIER 1 hr fire and acoustic inslated DPC for party wall and abutments
10 PER PACK
10 PER PACK
28
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SSPW30100
Flamstop 300 x 100 x1200mm Wall Barrier
Each
SSPW30165
Flamstop 300 x 165 x1200mm Wall Barrier
Each
BPWD30100
Flamstop 300 x 100 x1200mm Wall Barrier
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BRICK RELATED PRODUCTS VERTICAL DPC, HESSIAN, COMPRIBAND & JOINT FOAM
INSULATED VERTICAL DPC CODE
DESCRIPTION
Unit Qty
DPCI6165
Vertical Insulated DPC 165mm x 6m
Roll
DPCI6225
Vertical Insulated DPC 225mm x 6m
Roll
Insulated vertical DPC to prevent cold bridging around openings when returning blockwork. Ruberclose is manufactured using bitumen DPC and is available to order.
HESSIAN CODE
DESCRIPTION
Unit Qty
H137
Hessian 1.38 x 50m
Roll
COMPRIBAND SEALING JOINT FOAM CODE
DESCRIPTION
Unit Qty
TC315
Compriband Expanding Joint 8-15mm x 4.6m
Roll
TC807
Compriband Expanding Joint 3-7mm x 15m
Roll
Compriband Super is a neoprene & resin impregnated foam sealant strip which expands by 80% providing a high performance weatherseal. Supplied in roll form pre-compressed, suitable for many different applications such as sealing round doors & windows.
EXPANSION JOINT FOAM CODE
DESCRIPTION
Unit Qty
FJE10100
Expansion Joint Foam 100mm x 10mm x 10m
Roll
FJE10150
Expansion Joint Foam 150mm x 10mm x 10m
Roll
A high performance polyethylene closed cell foam joint filler for expansion joints in brickwork and concrete. Supplied with a tear-off strip which is removed to leave a void to be filled with polysulphide sealant.
EXPANSION JOINT FILLER ROD CODE
DESCRIPTION
Unit Qty
FJE1550
15mm x 500m Polyfoam Rod
Roll
FJE2035
20mm x 350m Polyfoam Rod
Roll
FJE2520
25mm x 200m Polyfoam Rod
Roll
A polythene foam in circular cord used as a back-up material for joint sealing
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
29
BRICK RELATED PRODUCTS FLAMSTOP CAVITY FIRE BARRIER
BRICK REINFORCEMENT CODE
DESCRIPTION
Unit Qty
MEM64G
Brick Reinforcement Mesh Galv. 64mm x 20m
Roll
MEM114G
Brick Reinforcement Mesh Galv. 114mm x 20m
Roll
MEM178G
Brick Reinforcement Mesh Galv. 178mm x 20m
Roll
MEM229G
Brick Reinforcement Mesh Galv. 229mm x 20m
Roll
MEM64S
Brick Reinforcement Mesh St/St 64mm x 20m
Roll
MEM114S
Brick Reinforcement Mesh St/St 114mm x 20m
Roll
MEM178S
Brick Reinforcement Mesh St/St 178mm x 20m
Roll
MEM229S
Brick Reinforcement Mesh St/St 229mm x 20m
Roll
Stainless Steel
Galvanised
BRICK REINFORCEMENT CODE
DESCRIPTION
Unit Qty
RBLS60
Brick Reinforcement Ladder Brick St/St 60mm x 2.7m
Each
RBLS100
Brick Reinforcement Ladder Brick St/St 100mm x 2.7m
Each
WALL CONNECTORS CODE
DESCRIPTION
Unit Qty
WCS
Tychon St/St Connector 2 x 1.2m
Each
WCSM
Movement St/St Connector 4 x 1.2m
Each
WCS wall connectors are suitable for all widths from 60mm-250mm and feature ‘turn and slide’ ties to accommodate all sizes of brick and block.
WCSM
WCS
STAINLESS STEEL WALL STARTER
Tie-In System For Extension Walls PART NO: WCS
System ties new internal or external brick or block walls from 60 to 250 mm thick to existing masonry buildings The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high
This pack contains the fixings necessary for a single leaf wall up to 2.4m • 2x Wall connectors 1.2m long, stainless steel • 5x Plugs, stainless steel coach screws and washers • 10x Stainless steel wall connector ties COMPLIES WITH BS EN10088 Design shear strength = 5.14kN per 2.4m (2.14kN/metre) Fixing into existing AAC blockwork with a compressive strength of 3.5N/mm2
30
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONNECT
Movement crack control Stainless Steel wall starter kit. Suitable for up to 3 storeys. Suitable for walls up to 250mm thick. Pack Contents: 4 x 1.2m lengths of Wall Starter, 20 x PVC Sleeved Ties, 1 x Fixing Pack (coachscrews, plugs & washers)
BRICK RELATED PRODUCTS METER BOXES, ACCESSORIES & JOIST CAPS
METER BOXES CODE
DESCRIPTION
Unit Qty
MBREW
Meter Box Recessed Electricity White
Each
MBREB
Meter Box Recessed Electricity Brown
Each
MBRE3W
Meter Box Recessed Electricity 3 Phase White
Each
MBRGW
Meter Box Recessed Gas White
Each
MBRGB
Meter Box Recessed Gas Brown
Each
MBSEW
Meter Box Surface Mounted Electricity White
Each
MBSE3W
Meter Box Surface Mounted Electricity 3 Phase White
Each
MBSGW
Meter Box Surface Mounted Gas White
Each
MBGGB
Meter Box Ground Semi-Buried Gas Brown
Each
MBGWB
Meter Box Ground Breaker Water Brown
Each
MBGGB
MBRGB
METER BOX ACCESSORIES CODE
DESCRIPTION
Unit Qty
HSB38
Hockey Stick Black 38mmx1.5m
Each
HSW38
Hockey Stick White 38mmx1.5m
Each
KMBE
Meter Box Key Electricity
Each
KMBG
Meter Box Key Gas
Each
MBDBE
Meter Box Door Electric Brown
Each
MBDBG
Meter Box Door Gas Brown
Each
MBDWE
Meter Box Door Electric White
Each
MBDWG
Meter Box Door Gas White
Each
HSW38
MBRGW
MBGWB MBSGW
JOIST CAPS CODE
DESCRIPTION
Unit Qty
CJ225050
Joist Cap 50mm x 225mm
Each
CJ225075
Joist Cap 75mm x 225mm
Each
CJ225100
Joist Cap 100mm x 225mm
Each
CJ225150
Joist Cap 150mm x 225mm
Each
MBSEW
An innovative and unique product designed for use where timber joists are built into a masonry external wall. They eliminate air leakage problems associated with shrinkage of timber joists.
CJ225050 CJ225075
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
31
BRICK RELATED PRODUCTS WALL TIES
HOUSING TIE Systems
TYPE 1 WALL TIES CODE
DESCRIPTION
Unit Qty
TW1200
Heavy Duty Wall Ties St/St 200mm
250
TW1225
Heavy Duty Wall Ties St/St 225mm
250
TW1250
Heavy Duty Wall Ties St/St 250mm
250
TW1275
Heavy Duty Wall Ties St/St 275mm
250
TW1300
Heavy Duty Wall Ties St/St 300mm
250
TW1250 TW1225 TW1200
A heavy duty stainless steel tie suitable for any construction. Available up to 300mm for spanning larger cavities.
TYPE 2 WALL TIES CODE
DESCRIPTION
Unit Qty
TW2200
Medium Duty Wall Ties St/St 200mm
1000
TW2225
Medium Duty Wall Ties St/St 225mm
1000
TW2250
Medium Duty Wall Ties St/St 250mm
1000
TW2225 TW2200
TYPE 4 WALL TIES CODE
DESCRIPTION
Unit Qty
TW4200
General Purpose Wall Ties St/St 200mm
1000
TW4225
General Purpose Wall Ties St/St 225mm
1000
TW4250
General Purpose Wall Ties St/St 250mm
1000
TW4275
General Purpose Wall Ties St/St 275mm
1000
TWNT4225
‘NON TANGLE’ Wall Ties St/St 225mm
1000
TWNT4250
‘NON TANGLE’ Wall Ties St/St 250mm
1000
i
TW4250
TWNT4225
NO N
The Tychon non tangle ties are supplied in bundles, packaging free, safe on site - convenient to use.
E TANGL
DOUBLE TRIANGLE TIES CODE
DESCRIPTION
Unit Qty
TDT250
Double Triangle Wall Ties St/St 250mm
1000
TDT300
Double Triangle Wall Ties St/St 300mm
1000
TDTO275
Double Triangle Wall Ties St/St Offset Drip 275mm
1000
TDTO300
Double Triangle Wall Ties St/St Offset Drip 300mm
1000
TDT300
TDTO275
A 4mm stainless steel wire tie for cavity walls.
i
32
The Tychon offset drip tie is for use in situations where cavity insulation exceeds the standard width
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BRICK RELATED PRODUCTS FRAME TIES, SLEEVES & MOVEMENT TIES
INSULATION RETAINING CLIPS CODE
DESCRIPTION
Unit Qty
CRI
Insulation Retaining Clips
1000
Plastic clip which secures on wall ties to retain insulation within the cavity.
CRI
BUTTERFLY TIES CODE
DESCRIPTION
Unit Qty
TB200S
Butterfy Wall Tie St/St 200mm
1000
TB250S
Butterfy Wall Tie St/St 250mm
1000
TB200S
We recommend minimum embedment of 63mm For estimating purposes the use of 5 No. Wall Ties per square metre
TIMBER FRAME WALL TIES CODE
DESCRIPTION
Unit Qty
TWTF5065
Timber Frame Wall Ties 50-65mm Cavity
1000
TWTF7510
Timber Frame Wall Ties 75-100mm Cavity
1000
A stainless steel tie designed to secure an outer skin of brickwork to an inner timber skin. Designed to allow vertical movement whilst still retaining its structural function. The TWTF5065 suits cavities up to 65mm and the TWTF7510 will accommodate cavities up to 100mm. Supplied with nails for fixing
WTF5065
FRAME & MOVEMENT TIES CODE
DESCRIPTION
Unit Qty
TF075S
St/St Frame Ties 75mm Projection*
100
TF100S
St/St Frame Ties 100mm Projection*
100
TF125S
St/St Frame Ties 125mm Projection*
100
TF150S
St/St Frame Ties 150mm Projection*
100
TF175S
St/St Frame Ties 175mm Projection*
100
TF200S
St/St Frame Ties 200mm Projection*
100
TF225S
St/St Frame Ties 225mm Projection*
100
TF250S
St/St Frame Ties 250mm Projection*
100
TF300S
St/St Frame Ties 300mm Projection*
100
TF350S
St/St Frame Ties 350mm Projection*
100
TFV150S
St/St Frame Ties 150mm Projection ‘V’ Drip
100
TFV175S
St/St Frame Ties 175mm Projection ‘V’ Drip
100
TFV200S
St/St Frame Ties 200mm Projection ‘V’ Drip
100
TFV225S
St/St Frame Ties 225mm Projection ‘V’ Drip
100
TFV250S
St/St Frame Ties 250mm Projection ‘V’ Drip
100
TM200S
Flat Movement Bar 200mm**
100
WTIP
St/St Neoprene Isolation Pad
100
TF150S
TM200S Complete with 2 Ties TM200S Complete with 1 Tie
WTIP
A range of stainless steel movement ties that provide restraint in one direction whilst allowing movement in the other
* Use SD200 Debonding Sleeves to make a column tie ** Add one or two SD200 Debonding Sleeves
DEBONDING SLEEVES CODE
DESCRIPTION
Unit Qty
SD120
Debonding Sleeves 120 x 20mm
100
Portsmouth 023 92 385 656
sales@strukta.co.uk
SD120
www.strukta.co.uk
33
BRICK RELATED PRODUCTS REMEDIAL MASONRY REPAIR
WIRE FRAME CRAMP CODE
DESCRIPTION
Unit Qty
TWFC100
Wire Frame Column Tie St/St 100mm Projection
100
TWFC125
Wire Frame Column Tie St/St 125mm Projection
100
TWFC150
Wire Frame Column Tie St/St 150mm Projection
100
TWFC175
Wire Frame Column Tie St/St 175mm Projection
100
SCREW IN FRAME TIES
TWFC100
TFSB150
CODE
DESCRIPTION
Unit Qty
TFSB150
Screw In Frame Ties B.Z.P. 150mm
100
TFSS150
Screw In Frame Ties St/St 150mm
100
TFSS150
BLUEBIRD TIES CODE
DESCRIPTION
Unit Qty
TBCS5075
Bluebird Ties St/St Cavity Type 50-75mm
Each
TBCS7510
Bluebird Ties St/St Cavity Type 75-100mm
Each
TBS
Bluebird Ties St/St
Each
TBS TBCS7510
REMEDIAL TIES CODE
DESCRIPTION
Unit Qty
FHS8195
Helical Star Ties St/St 195mm
100
FHS8245
Helical Star Ties St/St 245mm
100
TRSM200
Mechanical / Mechanical Ties 200mm
Each
TRSM225
Mechanical / Mechanical Ties 225mm
Each
TRSMT
Mechanical / Mechanical Ties Setting Tool
Each
TRSWT200
Wavy Tail Ties St/St 200mm
100
TRSWT225
Wavy Tail Ties St/St 225mm
100
TRSM200
TRSWT200
TIGER FIXINGS CODE
DESCRIPTION
Unit Qty
TWM50
Mechanical/Triangle Tie 50mm Cavity
100
TWM7510
Mechanical/Triangle Tie 75 – 100mm Cavity
100
TWM50
MASONRY REPAIR KIT
34
CODE
DESCRIPTION
Unit Qty
KPG
Grout Pointing Kit
Each
BHS610
Helical Bar St/St 6x1.0m
Each
BHS615
Helical Bar St/St 6x1.5m
Each
BHS630
Helical Bar St/St 6x3.0m
Each
OXP120308
Grout Mixing Paddle
Each
GC3
Cementitious Grout
3L
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BRICK RELATED PRODUCTS WINDPOST SYSTEMS
Windpost Systems Windposts span vertically between floors to provide additional lateral support for large panels of brickwork or large panels with openings. It is often difficult to provide suitable justification that masonry walls have lateral stiffness and therefore construction would traditionally be strengthened by the addition of thicker walls or by including columns, to effectively shorten the span of the masonry panel. We supply three types of windpost. The U windpost is installed within the cavity and will normally span between floor structures, with the same principle applying to the DU windpost. Both designs leave the inner leaf of the cavity wall undisturbed. The LP windpost is designed to be built into the inner skin of the cavity wall and normally spans between floor structures. The U type windpost shown fixed at the base to concrete and at the top to the underside of a steel beam. A range of top and base connectors can be design to suit specific project requirements.
Our windposts are manufactured from grade 304 stainless steel (grade 316 is available if required). Our Technical Team will provide full product specification and schedules. All three windpost designs are available in shorter lengths to provide the same level of stability to parapets or below windows, commonly termed Parapet or Spandrel Posts respectively. These posts are designed as cantilevers.
U type windpost for cavity installation
DU type windpost for cavity installation
LP type windpost for installation into the inner leaf of the blockwork
Our windposts are supplied with specifically designed base and upper connections and fixings. They are also supplied with a suitable number of wall-ties which will vary in relation to the post type used and the cavity width. There are five types:
U Tie
For use with U & DU windposts.
L50 Tie
For use with LP windposts (50mm cavity).
L75 Tie
For use with LP windposts (75mm cavity).
L100 Tie
For use with LP windposts (100mm cavity).
L Shear Tie
For use with LP windposts.
L Shear Tie
can be supplied with a de-bonding sleeve if the windpost is positioned at a vertical movement joint. L(50/75/100) Tie
U Tie
L Shear Tie
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
35
BRICK RELATED PRODUCTS WINDPOST TYPES & CHANNEL SYSTEMS
Windpost Loadings The loadings quoted for the windposts are derived from an allowable stress value of 181N/mm2 and a deflection limit of span/360 (the lesser of the two resultant figures is used as the quoted figure). Please note the quoted loadings are working/ characteristic loads.
Proportions and performance of U, DU and LP windposts. Windposts can be made to order at various sizes on a project basis. Post taken as a simply supported beam. SWL’s quoted are assuming adequate base and top fixing to concrete. For other substrates please contact the strukta Sales Team.
LP windpost
DU windpost
U windpost
Windpost Types The diagrams above show a typical wall construction at intermediate floor level showing the three Windpost types bolted to a concrete building frame.
b
b t
a
t
a
b
t
L50/L75/L100 Tie U Tie
U Tie
U windpost and Ties
t
a
t
L Shear Tie
DU windpost and Ties
LP windpost and Ties
CHANNEL SYSTEMS
36
CODE
DESCRIPTION
Unit Qty
CCTSB3
28/15 Slot Back Channel 3M
Each
TWD075
Dovetail Column Tie St/St 75mm Projection
100
TWD100
Dovetail Column Tie St/St 100mm Projection
100
TWD125
Dovetail Column Tie St/St 125mm Projection
100
TWD150
Dovetail Column Tie St/St 150mm Projection
100
TWD175
Dovetail Column Tie St/St 175mm Projection
100
TWD200
Dovetail Column Tie St/St 200mm Projection
100
TWD225
Dovetail Column Tie St/St 225mm Projection
100
TWD250
Dovetail Column Tie St/St 250mm Projection
100
TWDV075
Dovetail Column Tie St/St 75mm Projection ‘V’ Drip
100
TWDV100
Dovetail Column Tie St/St 100mm Projection ‘V’ Drip
100
TWDV125
Dovetail Column Tie St/St 125mm Projection ‘V’ Drip
100
TWDV150
Dovetail Column Tie St/St 150mm Projection ‘V’ Drip
100
TWDV175
Dovetail Column Tie St/St 175mm Projection ‘V’ Drip
100
TWDV200
Dovetail Column Tie St/St 200mm Projection ‘V’ Drip
100
TWDV225
Dovetail Column Tie St/St 225mm Projection ‘V’ Drip
100
Salisbury 01722 414 011
TWD075
TWDV125
sales@strukta.co.uk
www.strukta.co.uk
BRICK RELATED PRODUCTS COLUMN TIES & HEAD RESTRAINTS
COLUMN TIE CODE
DESCRIPTION
Unit Qty
TVC
Vertical Column Tie St/St Multi Section
Each
To restrain masonry back to steelwork with four different slot sizes to suit differing flange thicknesses
HEAD RESTRAINT CODE
DESCRIPTION
Unit Qty
VHR
Vertical Head Restraint St/St
Each
The Head Restraint is used for restraining the top of internal walls or the internal leaf of a cavity wall. The two angles clamp the top of the wall and have 10mm diameter holes to suit M8 bolts. They are supplied with two holes in the longer angle to allow the restraint to fit 100mm and 140mm blockwork.
INTERNAL HEAD RESTRAINT CODE
DESCRIPTION
Unit Qty
VIR
Vertical Head Restraint St/St
Each
The Internal Head Restraint is used for restraining the top of internal walls or the top of the inner leaf of a cavity wall. The opening at the front of the channel stem is sealed to prevent mortar ingress and to ensure that vertical movement can take place between the blockwork and the structure.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
37
BRICK RELATED PRODUCTS SLIDING ANCHOR & MASONRY SUPPORT
SLIDING ANCHOR CODE
DESCRIPTION
Unit Qty
TDS
Sliding Anchor St/St
Each
Sliding Anchors are used to restrain cavity walls to overhead structures and have stems which fit within the cavity and accept ties that slide to accommodate vertical movement. They are available different head options and one way or two way ties.
Masonry Support Systems Masonry support systems provide the method of controlling the uninterrupted height of masonry panels and accommodating differential vertical movement between masonry cladding and framed structures. We are able to supply a range of bespoke systems designed to carry masonry cladding fixed to steel or concrete structures.
• All support systems can be tailored to meet customers design and engineering considerations.
• Designed to carry up to 9m of
brickwork, to various cavity width.
• Individual bracket support,
suspended masonry, top hung brackets, and curved angles can be specified
• A stone system designed to suit
natural stone cladding in a range of size and thicknesses
i
FOR MORE INFORMATION AND FRIENDLY ADVICE CALL OUR SALES OFFICE Call 01722 414 011 for more information.
38
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BUILDING CHEMICALS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
39
BUILDING CHEMICALS MORTAR PLASTICISERS, DYES & WATERPROOFER
MORTAR ADDITIVES
MP25
CODE
DESCRIPTION
Unit Qty
MP5
Mortar Plasticiser 5L
5L
MP25
Mortar Plasticiser 25L
25L
MP210
Mortar Plasticiser 210L
210L
MP210T
Tap for MP210 Mortar Plasticiser
Each
MPS250
Mortar Plasticiser Sachets (250)
Tub
MPOA1
Opti-mix Admix Plasticiser 1L
1L
MPOFP1
Opti-mix Frostproofer 1L
1L
MPORA1
Opti-mix Render Additive 1L
1L
MPOW1
Opti-mix Waterproofer 1L
1L
MPFP5
Zeromix Frostproofer CFF-Chloride Free 5L
5L
MPFP25
Zeromix Frostproofer CFF-Chloride Free 25L
25L
MFRH5
Frostproofer/Rapid Hardener 5L
5L
MFRH25
Frostproofer/Rapid Hardener 25L
25L
An air entraining plasticiser that replaces lime in the mix. Both sachets and Opti-mix allow for effective and accurate dosing. Opti-mix is a concentrated plasticiser for ease of handling. MP5
MPS250
MFRH5 MPFP5 MADLBK5
MORTAR DYES MADLR1
MADPR
CODE
DESCRIPTION
Unit Qty
MADPR
Mortar Dye Powder Red
Tin
MADPBK
Mortar Dye Powder Black
Tin
MADPBR
Mortar Dye Powder Brown
Tin
MADPBU
Mortar Dye Powder Buff
Tin
MADLBK1
Mortar Dye Liquid Black
1L
MADLBK5
Mortar Dye Liquid Black 5L
5L
MAWI5 MASBR5
WATERPROOFER & BONDING AGENT
40
CODE
DESCRIPTION
Unit Qty
MAWI5
Integral Waterproofer 5L
5L
MAWI25
Integral Waterproofer 25L
25L
MASBR5
SBR Bonding Agent 5L
5L
MASBR25
SBR Bonding Agent 25L
25L
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BUILDING CHEMICALS SEALERS, STAIN REMOVERS & SELF LEVEL BABG10
OTHER CHEMICALS CODE
DESCRIPTION
Unit Qty
BABG10
Febond Blue Grit Plaster Bonding Agent
10L
STWBS5
Waterseal Brick Sealer
5L
STCHD5
Concrete Hardener & Dustproofer 5L
5L
STCHD25
Concrete Hardener & Dustproofer 25L
25L
TSBP5
Block Paving Seal 5L
5L
STPPS5
Path & Patio Sealer
5L
STWR5
Evercryl One Coat Waterproofer
5L
CMMR
Moss & Mould Remover 5L
5L
CSS5
Stabilising Solution 5L
5L
OSR5
Strike Release Oil 5L
5L
OSR25
Strike Release Oil 25L
25L
CBA5
Acid Brick Cleaner 5L
5L
CBA25
Acid Brick Cleaner 25L
25L
TRW5
Rot & Woodworm Treatment 5L
5L
TRW25
Rot & Woodworm Treatment 25L
25L
TWHG5
Wood Preserver Holly Green 5L
5L
STWBS5
STWR5
OSR5 CBA5
CMMR CSS5
STPPS5
TRW5
FLOORING COMPOUNDS & GROUTS
CSL20
CODE
DESCRIPTION
Unit Qty
CSL20
Self Levelling Compound
20Kg
CSL20D
Self Levelling Compound - Deep Fill
20kg
CSL20F
Self Level Compound - Flexi
20kg
AT20
Tile Adhesive
20Kg
FFP5
Floor Flex Plus
5L
ATFF
Flexi Floor Tile Adhesive
20Kg
CRSR6
Rapid Set Repair Cement
6Kg
GNS25
Non-Shrinking Grout
25Kg
GECEBEX
Cebex 100 Expanding Grout Additive
227g
• • • •
GNS25 CSL20F
Gives high grout fluidity with low water/cement ratio making injection of grout easy. Composition allows high early strength development in grouts 225g of Cebex 100 to 50kg cement AT20 Applications include: Bed grouting duct grouting, non shrink in filling and jointing ATFF
GECEBEX
Portsmouth 023 92 385 656
FFP5
sales@strukta.co.uk
www.strukta.co.uk
41
BUILDING CHEMICALS SILICONE SEALANTS
GENERAL PURPOSE SILICONES CODE
DESCRIPTION
Unit Qty
SMP310WH
Multi Purpose Sealant 310ml White
Tube
SMP310BR
Multi Purpose Sealant 310ml Brown
Tube
SMP310CL
Multi Purpose Sealant 310ml Clear
Tube
SMP310BK
Multi Purpose Sealant 310ml Black
Tube
EXTERNAL FRAME SEALANTS CODE
DESCRIPTION
Unit Qty
SFS310BR
Frame Sealant 310ml Brown
Tube
SFS310WH
Frame Sealant 310ml White
Tube
LOW MODULUS PVCu SEALANT CODE
DESCRIPTION
Unit Qty
SLM310W
Low Modulus Sealant 310ml White
Tube
SLM310C
Low Modulus Sealant 310ml Clear
Tube
SLM310B
Low Modulus Sealant 310ml Black
Tube
SLM310C
Low Modulus Sealant 310ml Caramel
Tube
HIGH MODULUS SANITARY SEALANT CODE
DESCRIPTION
Unit Qty
SHM310W
High Modulus Sanitary Sealant 310ml White
Tube
SHM310C
High Modulus Sanitary Sealant 310ml Clear
Tube
SHM310I
High Modulus Sanitary Sealant 310ml Ivory
Tube
SS310C
Dow Corning 785 Sealant Clear
Tube
SS310W
Dow Corning 785 Sealant White
Tube
FOREVER WHITE SEALANT CODE
DESCRIPTION
Unit Qty
SFW310W
Forever White Silicone Sealant 310ml
Tube
SFW310C
Forever Clear Silicone Sealant 310ml
Tube
OTHER SEALANTS CODE
DESCRIPTION
Unit Qty
SL310
Lead Sealant 310ml
Tube
SRG310
Roof & Gutter Sealant 310ml
Tube
CP310
Painters Caulk 310ml
Tube
SGS310BS
Silicone Glazing Sealant 310ml Brushed Steel
Tube
SAW310
All Weather Sealant 310ml Clear
Tube
SEA150
Silicone Eater 150ml
Tube
SEALANT GUNS
42
CODE
DESCRIPTION
Unit Qty
GSS
Standard Sealant Gun
Each
GSP
Pro Sealant Gun
Each
GSJ
Jumbo Sealant Gun
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BUILDING CHEMICALS GRIP ADHESIVES & FIRE CEMENT
GRIP ADHESIVES CODE
DESCRIPTION
Unit Qty
ASG350
StrongGrip Adhesive 350ml
Tube
ASG350SF
Solvent Free StrongGrip Adhesive 350ml
Tube
AGF350
Gripfill Adhesive 350ml
Tube
AGF350SF
Solvent Free Gripfill Adhesive 350ml
Tube
POLYMER ADHESIVE CODE
DESCRIPTION
Unit Qty
ASAW
Schtuk Extreme Adhesive White
Tube
ASAB
Schtuk Extreme Adhesive Black
Tube
ASAC
Schtuk Extreme Adhesive Clear
Tube
• Schtuk Extreme is the ultimate combined adhesive and sealant, that seals and bonds virtually everything to anything. Polymer free based.
Grip Adhesives • StrongGrip is a high strength gap filling
adhesive. Interior and exterior use. Yellow tube - solvent free. Solvent free version is white in colour.
JOINT SEALANTS CODE
DESCRIPTION
Unit Qty
SEJ310BK
Expansion Joint Sealant Black
Tube
SEJ310BR
Expansion Joint Sealant Brown
Tube
SEJ310B
Expansion Joint Sealant Buff
Tube
SEJ310W
Expansion Joint Sealant White
Tube
SEJ310G
Expansion Joint Sealant Grey
Tube
SEJ310R
Expansion Joint Sealant Red
Tube
SEJ310M
Expansion Joint Sealant Magnolia
Tube
FIRE CEMENT & SEALANT CODE
DESCRIPTION
Unit Qty
SF310
Fire Sealant 310ml
Tube
SFB310
Flue Block Sealant 310ml
Tube
CFB2
Flue Block Fire Cement 2Kg
Tub
CFS310
Steel Flue Sealant 310ml
Tube
SA900W
Acoustic Sealant 900ml White
Tube
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
43
BUILDING CHEMICALS JOINT COMPOUNDS, RESINS & LUBRICANTS
GEO-FIX PAVING JOINT COMPOUND CODE
DESCRIPTION
Unit Qty
GPBI20G
Geo-Fix Grey Joint Compound
20Kg
GPBI20B
Geo-Fix Buff Joint Compound
20Kg
CHEMICAL RESIN SYSTEMS CODE
DESCRIPTION
Unit Qty
RP300
Polyester Chemical Anchor Resin 300ml
Tube
RP410
Polyester Chemical Anchor Resin 410ml
Tube
REASF300
Epoxy Acrylate Styrene Free Resin 300ml
Tube
REASF410
Epoxy Acrylate Styrene Free Resin 410ml
Tube
NR
Spare Resin Nozzles
Each
GR
Co-Axial Resin Gun
Each
GB
Blow Gun
Each
PAINTS CODE
DESCRIPTION
Unit Qty
PSZINC
Zinc Spray
Can
PRO1
Red Oxide Paint 1Ltr
1L
PRO2
Red Oxide Paint 2.5Ltr
2.5L
PRO5
Red Oxide Paint 5Ltr
5L
PINWH5
Intumescent Paint White
5L
PCG1
Cold Galvanised Paint 1 Ltr
1L
PCG4
Cold Galvanised Paint 4 Ltr
4L
OILS & LUBRICANTS
44
CODE
DESCRIPTION
Unit Qty
LSS
Silicone Spray
Can
LWD40
WD40 – Lubricant Spray 420ml
420ml
LO31
3 in 1 Oil 200ml
200ml
LO1S
One Shot Oil 1:50 100ml
100ml
WS2
White Spirit 2L
2L
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BUILDING CHEMICALS ADHESIVES & EXPANDING FOAMS
PVA ADHESIVES CODE
DESCRIPTION
Unit Qty
APVA5
PVA Renderbond Glue 5L
5L
APVA1
PVA Renderbond Glue 1L
1L
APVAWR1
SCHTUK Water Resistant PVA Glue 1L
1L
APVAWR5
SCHTUK Water Resistant PVA Glue 5L
5L
AW1
D4 Wood Glue 1L
1L
CODE
DESCRIPTION
Unit Qty
GAMF50
50g Mitre Mate Glue & 200ml Activator
Kit
GAMF100
100g Mitre Mate Glue & 400ml Activator
Kit
GS20
20g Super Glue
20g
GS3
3g Super Glue
3g
ADHESIVES
LUMBERJACK ACCESSORIES CODE
DESCRIPTION
Unit Qty
ALJ650
Lumberjack 650ml Floor Adhesive
650ml
ALJMBPR
Lumberjack MB Primer
5L
CONTACT ADHESIVES CODE
DESCRIPTION
Unit Qty
AC500
Contact Adhesive 0.5L
500ml
AC5000
Contact Adhesive 5L
5L
ACS500
Contact Adhesive Spray 500ml
500ml
TCAC025
Contact Adhesive Thinner & Cleaner 25ml
25ml
TCAC250
Contact Adhesive Thinner & Cleaner 250ml
250ml
JOINERS ADHESIVE CODE
DESCRIPTION
Unit Qty
APU310
PU Adhesive 310ml
310ml
APU750
PU Adhesive 750ml
750ml
GPRWG15
Resintite Power Wood Glue
1.5kg
EXPANDING FOAM CODE
DESCRIPTION
Unit Qty
FEHH
Expanding Foam Standard Hand Held 750ml
Can
FEGG
Expanding Foam Standard Gun Grade 750ml
Can
FEHHFR
Expanding Foam Fire Rated Hand Held 750ml
Can
FEGGFR
Expanding Foam Fire Rated Gun Grade 750ml
Can
FGC
Foam Gun Cleaner 500ml
Can
ADWGG
Dry Fix Drywall Adhesive Gun Grade 750ml
Can
GFM
Metal Foam Gun
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
45
BUILDING CHEMICALS SCHTUK EXTREME
NEW
PRODUCT
We are pleased to launch the all new ‘Schtuk Extreme’, a one part, chemically curing solvent free sealant and adhesive combining the qualities of silicone and polyurethane technologies. ‘Schtuk Extreme’ bonds and seals virtually everything to anything in all conditions and is over paintable as well.
Schtuk PVA D3 premium PVA adhesive is an all-purpose weatherproof wood adhesive that is of high quality, and is resin based for all wood bonding. We stock 5 litre and 1 litre bottles.
‘Schtuk Extreme’ offers a direct alternative to Fixall, Stixall and CT1
46
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
47
STEELWORK & LINTELS CONCRETE LINTELS
CONCRETE LINTELS 100 x 65mm CODE
DESCRIPTION
Unit Qty
LC106506
Concrete Lintel 100 x 65 600mm
Each
LC106509
Concrete Lintel 100 x 65 900mm
Each
LC106512
Concrete Lintel 100 x 65 1200mm
Each
LC106513
Concrete Lintel 100 x 65 1350mm
Each
LC106515
Concrete Lintel 100 x 65 1500mm
Each
LC106518
Concrete Lintel 100 x 65 1800mm
Each
LC106521
Concrete Lintel 100 x 65 2100mm
Each
LC106524
Concrete Lintel 100 x 65 2400mm
Each
LC106527
Concrete Lintel 100 x 65 2700mm
Each
LC106530
Concrete Lintel 100 x 65 3000mm
Each
LC106533
Concrete Lintel 100 x 65 3300mm
Each
LC106536
Concrete Lintel 100 x 65 3600mm
Each
CONCRETE LINTELS 100 x 140mm
CONCRETE LINTELS 140 x 65mm
DESCRIPTION
Unit Qty
LC101409
Concrete Lintel 100 x 140 900mm
Each
LC101412
Concrete Lintel 100 x 140 1200mm
Each
CODE
DESCRIPTION
Unit Qty
LC101413
Concrete Lintel 100 x 140 1350mm
Each
LC146506
Concrete Lintel 140 x 65 600mm
Each
LC101415
Concrete Lintel 100 x 140 1500mm
Each
LC146509
Concrete Lintel 140 x 65 900mm
Each
LC101418
Concrete Lintel 100 x 140 1800mm
Each
LC146512
Concrete Lintel 140 x 65 1200mm
Each
LC101421
Concrete Lintel 100 x 140 2100mm
Each
LC146515
Concrete Lintel 140 x 65 1500mm
Each
LC101424
Concrete Lintel 100 x 140 2400mm
Each
LC146518
Concrete Lintel 140 x 65 1800mm
Each
LC101427
Concrete Lintel 100 x 140 2700mm
Each
LC146521
Concrete Lintel 140 x 65 2100mm
Each
LC101430
Concrete Lintel 100 x 140 3000mm
Each
LC146524
Concrete Lintel 140 x 65 2400mm
Each
LC101433
Concrete Lintel 100 x 140 3300mm
Each
LC146527
Concrete Lintel 140 x 65 2700mm
Each
LC101436
Concrete Lintel 100 x 140 3600mm
Each
LC146530
Concrete Lintel 140 x 65 3000mm
Each
LC146536
Concrete Lintel 140 x 65 3600mm
Each
CONCRETE LINTELS 215 x 65mm
48
CODE
CONCRETE LINTELS 150 x 140mm CODE
DESCRIPTION
Unit Qty
LC151409
Concrete Lintel 150 x 140 900mm
Each
CODE
DESCRIPTION
Unit Qty
LC151412
Concrete Lintel 150 x 140 1200mm
Each
LC216509
Concrete Lintel 215 x 65 900mm
Each
LC151413
Concrete Lintel 150 x 140 1350mm
Each
LC216512
Concrete Lintel 215 x 65 1200mm
Each
LC151415
Concrete Lintel 150 x 140 1500mm
Each
LC216515
Concrete Lintel 215 x 65 1500mm
Each
LC151418
Concrete Lintel 150 x 140 1800mm
Each
LC216518
Concrete Lintel 215 x 65 1800mm
Each
LC151421
Concrete Lintel 150 x 140 2100mm
Each
LC216521
Concrete Lintel 215 x 65 2100mm
Each
LC151424
Concrete Lintel 150 x 140 2400mm
Each
LC216524
Concrete Lintel 215 x 65 2400mm
Each
LC151427
Concrete Lintel 150 x 140 2700mm
Each
LC216527
Concrete Lintel 215 x 65 2700mm
Each
LC151430
Concrete Lintel 150 x 140 3000mm
Each
LC216530
Concrete Lintel 215 x 65 3000mm
Each
LC151433
Concrete Lintel 150 x 140 3300mm
Each
LC216536
Concrete Lintel 215 x 65 3600mm
Each
LC151436
Concrete Lintel 150 x 140 3600mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS CONCRETE LINTELS & PADSTONES
CONCRETE LINTELS 100 x 215mm CODE
DESCRIPTION
Unit Qty
LC102109
Concrete Lintel 100 x 215 900mm
Each
LC102112
Concrete Lintel 100 x 215 1200mm
Each
LC102113
Concrete Lintel 100 x 215 1350mm
Each
LC102115
Concrete Lintel 100 x 215 1500mm
Each
LC102118
Concrete Lintel 100 x 215 1800mm
Each
LC102121
Concrete Lintel 100 x 215 2100mm
Each
LC102124
Concrete Lintel 100 x 215 2400mm
Each
LC102127
Concrete Lintel 100 x 215 2700mm
Each
LC102130
Concrete Lintel 100 x 215 3000mm
Each
LC102133
Concrete Lintel 100 x 215 3300mm
Each
LC102136
Concrete Lintel 100 x 215 3600mm
Each
CONCRETE LINTELS 140 x 215mm CODE
DESCRIPTION
Unit Qty
LC142112
Concrete Lintel 140 x 215 1200mm
Each
LC142115
Concrete Lintel 140 x 215 1500mm
Each
LC142118
Concrete Lintel 140 x 215 1800mm
Each
LC142121
Concrete Lintel 140 x 215 2100mm
Each
LC142124
Concrete Lintel 140 x 215 2400mm
Each
LC142127
Concrete Lintel 140 x 215 2700mm
Each
LC142130
Concrete Lintel 140 x 215 3000mm
Each
LC142133
Concrete Lintel 140 x 215 3300mm
Each
LC142136
Concrete Lintel 140 x 215 3600mm
Each
Bespoke Concrete Padstones...
AVAILABLE TO ORDER
CONCRETE PADSTONES CODE
DESCRIPTION
Unit Qty
PC212110
Concrete Padstone 215 x 215 x 100mm
Each
PC212114
Concrete Padstone 215 x 215 x 140mm
Each
PC331410
Concrete Padstone 330 x 140 x 100mm
Each
PC441410
Concrete Padstone 440 x 140 x 100mm
Each
PC442110
Concrete Padstone 440 x 215 x 100mm
Each
PC442114
Concrete Padstone 440 x 215 x 140mm
Each
PC442121
Concrete Padstone 440 x 215 x 215mm
Each
PC602110
Concrete Padstone 600 x 215 x 100mm
Each
PCL44442110
Concrete Padstone L-Shaped 440 x 440 x 215 x 102mm
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
49
STEELWORK & LINTELS TECHNICAL DATA
Lintel Technical data Corrosion Protection All Supergalv lintels are protected by hot-dip galvanising the complete lintel after fabrication. This process out performs all other protection systems by: Fully protecting every surface, cut edge and weld with a metallurgically-bonded zinc coating, where other systems actually remove zinc during fabrication and do not provide full protection to all surfaces. Creating a build-up of zinc coating at the most vulnerable points (edges etc.) which are more susceptible to damage on site and are the least protected in other systems. Depositing a minimum zinc coating thickness of 65µm in a metallurgical bond over the base steel.
Insulation
Installation Advice
All external cavity wall lintels are insulated with expanded polystyrene blocks to BS EN 13163. The insulation is CFC, HCFC and HFA free and these agents are not used at any stage in manufacture. All lintels comply with Parts L1 and L2 of the Building Regulations approved documents. The insulation has an ozone depletion potential of zero, and being blown with pentane achieves a BREEAM credit for having a global warming potential of zero.
• Do not bear lintels onto cut blocks, always use full masonry units or padstones. • Do not dry bed lintels on bearings. Mortar beds should be used to prevent lintel settling under load. • Do use an additional DPC. • Do use stop ends and bed weeps (at 450mm centres) to all lintels in fairfaced masonry walls.
Structural Performance
• Do ensure that open back lintels are filled with properly bonded masonry before work proceeds over.
The structural performance of Supergalv lintels is supported by systematic and extensive in-house testing and confirmed by independent testing. Lintels have been tested for structural performance, flexural strength and shear load resistance.
• Do ensure that both leaves of the cavity wall are raised equally to avoid eccentric loading of lintel flanges.
Material Supergalv lintels are manufactured from steel to BSEN 10025 Fe 430 A, having a minimum yield stress of 300 N/mm2. Corrosion protection is provided by zinc to BS EN 1179: 2003 Although the Supergalv and Ultragalv processes offer the highest level of corrosion protection available, there may be instances where the use of stainless steel is more appropriate, e.g. certain industrial applications, or marine environments. To satisfy these requirements we can offer our full range of lintels fabricated from stainless steel to BS EN 10088-2 (304 S15)
50
Salisbury 01722 414 011
• Do position concrete floor units carefully and gently to avoid impact damage and shock loads which may temporarily over stress the lintel with resultant excessive deflection or distortion. • Do make sure that the lintel toe projects beyond the window head to prevent water ingress. • Do ensure that the maximum cavity width is not exceeded, and that masonry does not overhang by more than 25mm.
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS LINTEL COMPARISON CHART
Lintel Comparison Chart Standard Duty
IG LINTELS
KEYSTONE
P/K-50
P/K-50 P/K-70 P/K-90 S/K-50 S/K-70 S/K-70 L1/S50
HD/K-50 HD/K-70 HD/K-90
L1/S50 L1/S75 L1/S100
L1/HD50 L1/HD75 L1/HD100
EXPAMET
EX50S
EX50S EX75S EX95S CB50
BIRTLEY
Heavy Duty
HD/K-50
CB50 CB70 CB90
L1/HD50
EX50H
EX50H EX75H EX95H CB50HD
CB50HD CB70HD CB90HD
Extra Heavy Duty
CFS/K-50
CFS/K-50 CFS/K-70 CFS/K-90
L5/50
X/K-50
X/K-50 X/K-70 X/K-90
L6/75
L1/XHD50 L6/50 L1/XHD75 L6/75 L1/XHD100 EX50XH
EXTP50H EXTP75H HD50
HD50 HD70 HD90
Wider Outer Leaf
P/K-50 WIL P/K-70 WIL P/K-90 WIL S/K-50 WIL S/K-70 WIL S/K-70 WIL L1/SWIL50
HD/K-50 WIL CPS/K-50 HD/K-70 WIL CPS/K-70 HD/K-90 WIL CPS/K-90
S/K-50 WOL EP/K-50 S/K-70 WOL S/K-90 WOL
L1/HDWIL50 L1/XHDWIL50 L1/SWOL50
EX50SW1
EX50HW1 EX50XHW1 EX50SWO
EX50RSC EX75RSC
EX50SW1 EX75SW1 EX95SW1
EX50HW1 EX75HW1 EX95HW1
XHD50 XHD70 XHD90 CTD150
L1/E50
L1/SWIL50 L1/HDWIL50 L1/XHDWIL50 L1/SWOL50 L1/E50 L1/SWIL75 L1/HDWIL75 L1/XHDWIL75 L1/SWOL75 L1/SWIL100 L1/HDWIL100 L1/XHDWIL100 L1/SWOL100
EX50RSC
XHD50
Eaves Lintel EP/K-50
EX50XHW1 EX50SWO EX75XHW1 EX75SWO EX95XHW1 EX95SWO
CB50/130 CB50/130HD HD50/130 CB150/50/ 100
CB50/130 CB70/130 CB90/130
CB50/130HD HD50/130 CB50/130HD HD70/130 CB50/130HD HD90/130
CG50/125 CGH50/125 CZH50/125
EX50E
EX50E
CBEV50
CB150/50/ CBEV50 100 CN41
EP/K-50 WIL
Timber Frame
T/K-50
EP/K-50 WIL T/K-50 T/K-70 T/K-90
L1/EWIL50
L7/50
L1/EWIL50 L7/50
EX50EWI
EX50EWI
CBEV50/130
EX50TIM
EX50TIM
TF30
CBEV50/130 TF50
CGE50/100 CGE50/125
Concrete Inner
Single Leaf
B/K-50
B/K-50 B/K-70 B/K-90
SB/K
SB/K
L8/50
L8/50
L10
EX50CON
EX50CON
LT50
SL/K
L11
L11
EXW90A
EXW90A
LT50
Solid Wall
SL/K
L10
LA
LA
CTF5
CATNIC
CG50/100 CGH50/100 CZH50/100
Wider Inner Leaf
P/K-50 WIL HD/K-50 WIL CFS/K-50 WIL S/K-50 WOL
Box Lintels
SW/K
BOX/K 100 BOX/K 200 HDBOX/K-100
IB/K (2c) IB/K (3c)
BOX/K-75 BOX/K-200 HDBOX/K-100 HDBOX/K-150 BOX/K-100 HDBOX/K-200 BOX/K-150 BOX 100 BOX 200 HDBOX 100
INT/K-75 INT/K-100
INT100
INT64 INT100
L9
L9
BOX75 BOX100 BOX150
EXW100C
EX75INT
EXW100C
EX75INT EX100INT
EXW200T
EV100
INT100
O8190
EV100
CN96
INT/K 100
CN48, 49
INT100
CN102
EXW200T
08190
CN51
EXB75
EXB75 EXB100 EXB140 S8100
INT100HD SB100 SB140 CN5X
BOX200
EXB200
EXB200
SBL200
SBL200
CN71
HDBOX100 HDBOX150 HDBOX200 EXB100H
EXB100H EXB140H EXB200H SB100HD
SB100HD SB140HD SB200HD CN6X
N/A CG50,CZ50 CGH50/100 CZH50/100 CTD150 CG70,CZ70 CGH70/100 CZH70/100 CTD175 CG90,CZ90 CGH90/100 CZH90/100 CTD200
CG50/125 CG70/125 CG90/125
CGH50/125 CZH50/125 CN41, 42 CGH70/125 CZH70/125 CGH90/125 CZH90/125
CGE50/100 CGE50/125 CTF5
CN94, 95 96,97
Special Lintels • Available in 5-7 days
• Quick reply scheduling
• Design service for custom made lintels
• Full specification prepared
• On-site technical assistance
Portsmouth 023 92 385 656
sales@strukta.co.uk
CN48, 49
CN92, 102 CN50, 51
CN100 CN71, 81 CN5X, 6X CN56X, 66X
CN5X, 6X CN55X, 56X
SAVE TIME
ON SITE!
www.strukta.co.uk
51
STEELWORK & LINTELS BIRTLEY LINTELS
CAVITY WALLS
CAVITY WALLS
Overall Width Outer Leaf Cavity Inner Leaf
250 to 270 100 50 to 70 100 to 115
Overall Width Outer Leaf Cavity Inner Leaf
We recommend the use of an additional cavity tray with all external cavity wall lintels
CB 50 - STANDARD DUTY LENGTH RANGE MM
750 - 1200 1350 - 1650 1800 - 2100 2250 - 2400 2550 - 2700 2850 - 3000 3300 - 3900
We recommend the use of an additional cavity tray with all external cavity wall lintels
CB 70 - STANDARD DUTY MAX UDL KN
15 15 20 22 26 26 26
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
112 112 143 148 175 190 205
750 - 1200 1350 - 1650 1800 - 2100 2250 - 2400 2550 - 3000 3300 - 3900
5.8 7.3 8.1 9.9 11.0 11.6 14.2
CB 50 HD - MEDIUM DUTY
750 - 1500 1650 - 2100 2250 - 3000
MAX UDL KN
15 15 20 22 26 26
DEPTH WEIGHT MM KG/M
106 106 148 148 185 200
5.8 7.3 8.1 10.1 11.6 14.2
Not recommended for the support of P.C.Concrete floors
Not recommended for the support of P.C.Concrete floors
LENGTH RANGE MM
270 to 290 100 70 to 90 100 to 115
CB 70 HD - MEDIUM DUTY MAX UDL KN
36 36 36
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
153 205 205
750 - 1500 1650 - 2100 2250 - 3000
10.1 14.2 14.5
Not recommended for the support of P.C.Concrete floors
HS 50 - HEAVY DUTY
MAX UDL KN
36 36 36
DEPTH WEIGHT MM KG/M
153 205 205
10.1 14.2 14.5
Not recommended for the support of P.C.Concrete floors
HS 70 - HEAVY DUTY LENGTH RANGE MM
750 - 1200 1350 - 1800 1950 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4500 4800 5100
MAX UDL KN
70 70 60 60 55 50 40 35 25
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4
750 - 1200 1350 - 1800 1950 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4500 4800 5100
HDX 50 - EXTRA HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100
MAX UDL KN
70 70 60 60 55 50 40 35 25
DEPTH WEIGHT MM KG/M
225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4
HDX 70 - EXTRA HEAVY DUTY MAX UDL KN
100 80 70 60 45
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
225 31.1 225 31.1 225 31.1 225 31.1 225 31.1
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100
MAX UDL KN
100 80 70 60 45
DEPTH WEIGHT MM KG/M
225 31.1 225 31.1 225 31.1 225 31.1 225 31.1
Denotes plaster key
52
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS BIRTLEY LINTELS
CAVITY WALLS
CAVITY WALLS
Overall Width Outer Leaf Cavity Inner Leaf
290 to 310 100 90 to 100 100 to 115
Overall Width Outer Leaf Cavity Inner Leaf
We recommend the use of an additional cavity tray with all external cavity wall lintels
310 to 330 100 110 to 130 100 to 115
We recommend the use of an additional cavity tray with all external cavity wall lintels
CB 90 - STANDARD DUTY LENGTH RANGE MM
750 - 1200 1350 - 1650 1800 - 2100 2250 - 2400 2550 - 3000 3300 - 3900
MAX UDL KN
15 15 20 22 26 26
DEPTH WEIGHT MM KG/M
106 106 138 151 187 202
5.9 7.4 8.4 10.4 12.0 14.2
Not recommended for the support of P.C.Concrete floors
CB 110 - STANDARD DUTY CB 90 HD - MEDIUM DUTY LENGTH RANGE MM
750 - 1500 1650 - 2100 2250 - 3000
LENGTH RANGE MM MAX UDL KN
36 36 36
DEPTH WEIGHT MM KG/M
138 195 202
750 - 1500 1650 - 2100 2250 - 2700 2850 - 3300
10.5 13.9 14.2
MAX UDL KN
20 20 25 30
DEPTH WEIGHT MM KG/M
138 143 173 195
8.6 10.7 11.8 14.9
Not recommended for the support of P.C.Concrete floors
Not recommended for the support of P.C.Concrete floors
HS 110 - HEAVY DUTY HS 90 - HEAVY DUTY
LENGTH RANGE MM LENGTH RANGE MM
750 - 1200 1350 - 1800 1950 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4500 4800 5100
MAX UDL KN
70 70 60 60 55 50 40 35 25
DEPTH WEIGHT MM KG/M
750 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4500 4800 5100
225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4 225 19.4
MAX UDL KN
60 60 55 50 40 35 35
DEPTH WEIGHT MM KG/M
225 21.7 225 21.7 225 21.7 225 21.7 225 21.7 225 21.7 225 21.7
HDX 110 - EXTRA HEAVY DUTY HDX 90 - EXTRA HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100
LENGTH RANGE MM MAX UDL KN
100 80 70 60 45
DEPTH WEIGHT MM KG/M
225 31.1 225 31.1 225 31.1 225 31.1 225 31.1
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100
MAX UDL KN
100 80 70 60 45
DEPTH WEIGHT MM KG/M
225 31.1 225 31.1 225 31.1 225 31.1 225 31.1
Versions also available for 125 to 140 inner leaf
Denotes plaster key
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
53
STEELWORK & LINTELS BIRTLEY LINTELS
CAVITY WALLS
CAVITY WALLS
Overall Width Outer Leaf Cavity Inner Leaf
330 to 350 100 130 to 150 100 to 115
Overall Width Outer Leaf Cavity Inner Leaf
We recommend the use of an additional cavity tray with all external cavity wall lintels
330 to 370 100 150 to 170 100 to 115
We recommend the use of an additional cavity tray with all external cavity wall lintels
CB 130 - STANDARD DUTY LENGTH RANGE MM
750 - 1500 1650 - 2100 2250 - 2700 2850 - 3300
MAX UDL KN
20 20 25 30
DEPTH WEIGHT MM KG/M
129 137 166 188
8.6 10.7 11.8 14.9
Not recommended for the support of P.C.Concrete floors
CB 150 - STANDARD DUTY HS 130 - HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4500 4800 5100
MAX UDL KN
60 60 55 50 40 35 25
LENGTH RANGE MM
DEPTH WEIGHT MM KG/M
225 21.7 225 21.7 225 21.7 225 21.7 225 21.7 225 21.7 225 21.7
750 - 1500 1650 - 2100 2250 - 2700 2850 - 3300 150
MAX UDL KN
20 20 25 30
DEPTH WEIGHT MM KG/M
115 118 152 174
8.6 10.7 11.8 14.9
Not recommended for the support of P.C.Concrete floors
HS 150 - HEAVY DUTY HDX 130 - EXTRA HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100
MAX UDL KN
100 80 70 60 45
LENGTH RANGE MM
DEPTH WEIGHT MM KG/M
225 34.7 225 34.7 225 34.7 225 34.7 225 34.7
150
750 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4500 4800 5100
MAX UDL KN
60 60 55 50 40 35 25
DEPTH WEIGHT MM KG/M
225 21.7 225 21.7 225 21.7 225 21.7 225 21.7 225 21.7 225 21.7
Versions also available for 125 to 140 inner leaf
HDX 150 - EXTRA HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100 150
MAX UDL KN
100 80 70 60 45
DEPTH WEIGHT MM KG/M
225 34.7 225 34.7 225 34.7 225 34.7 225 34.7
Versions also available for 125 to 140 inner leaf
Denotes plaster key
54
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS BIRTLEY LINTELS
CAVITY WALLS
CAVITY WALLS
Overall Width Outer Leaf Cavity Inner Leaf
275 to 310 100 50 to 70 125 to 140
Overall Width Outer Leaf Cavity Inner Leaf
We recommend the use of an additional cavity tray with all external cavity wall lintels
295 to 330 100 70 to 90 125 to 140
We recommend the use of an additional cavity tray with all external cavity wall lintels
CB 50/130 - STANDARD DUTY LENGTH RANGE MM
MAX UDL KN
750 - 1200 1350 - 1500 1650 - 1800 1950 - 2400 2550 - 2850 3000 - 3900
15 15 20 22 26 26
DEPTH WEIGHT MM KG/M
108 108 140 148 177 185
5.9 7.4 8.5 10.4 11.6 13.9
Not recommended for the support of P.C.Concrete floors
CB 70/130 - STANDARD DUTY HS 50/130 - HEAVY DUTY LENGTH RANGE MM
LENGTH RANGE MM MAX UDL KN
750 - 1200 1350 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4800 5100
60 60 60 55 50 40 25
DEPTH WEIGHT MM KG/M
MAX UDL KN
750 - 1200 1350 - 1650 1800 - 2400 2550 - 2850 3000 - 3900
225 16.5 225 18.0 225 19.5 225 19.5 225 19.5 225 19.5 225 19.5
15 20 22 30 26
DEPTH WEIGHT MM KG/M
100 128 140 177 192
7.6 10.3 12.5 14.3 15.0
Not recommended for the support of P.C.Concrete floors
Not recommended for the support of P.C.Concrete floors
HS 70/130 - HEAVY DUTY HDX 50/130 - EXTRA HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100
LENGTH RANGE MM
MAX UDL KN
100 80 70 60 45
DEPTH WEIGHT MM KG/M
MAX UDL KN
750 - 1200 1350 - 2100 2250 - 2700 2850 - 3000 3300 - 3900 4200 - 4800 5100
225 34.5 225 34.5 225 34.5 225 34.5 225 34.5
60 60 60 55 50 40 25
DEPTH WEIGHT MM KG/M
225 16.5 225 18.0 225 19.5 225 19.5 225 19.5 225 19.5 225 19.5
HDX 70/130 - EXTRA HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800 5100
MAX UDL KN
100 80 70 60 45
DEPTH WEIGHT MM KG/M
225 34.5 225 34.5 225 34.5 225 34.5 225 34.5
Denotes plaster key
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
55
STEELWORK & LINTELS BIRTLEY LINTELS
CAVITY WALLS (STONEWORK)
ATTIC TRUSS
Overall Width Outer Leaf Cavity Inner Leaf
320 to 350 125 to 150 95 to 110 100 to 115
Overall Width Outer Leaf Cavity Inner Leaf
We recommend the use of an additional cavity tray with all external cavity wall lintels
CB 125/90/100 - MEDIUM DUTY LENGTH RANGE MM
750 - 1500 1650 - 2400 2550 - 3000
250 to 285 100 50 to 70 100 to 115
AT 50 - HEAVY DUTY MAX UDL KN
25 30 30
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
150 190 210
750 - 1800 1950 - 2400 2550 - 2700
9.5 13.9 17.0
MAX UDL KN
35 35 35
DEPTH WEIGHT MM KG/M
150 150 150
9.8 12.2 14.7
Not recommended for the support of P.C.Concrete floors Versions are also available for other cavity widths
HS 125/90/100 - HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3300 3600 - 4200 4500 - 4800
MAX UDL KN
60 50 40 35
DEPTH WEIGHT MM KG/M
225 225 225 225
17.7 17.7 19.0 19.0
Overall Width Outer Leaf Cavity Inner Leaf
270 to 305 100 70 to 90 100 to 115
AT 70 - HEAVY DUTY EAVES (CLOSED) Cavity Inner Leaf
LENGTH RANGE MM
50 to 90 100 to 115
750 - 1800 1950 - 2400 2550 - 2700
MAX UDL KN
35 35 35
DEPTH WEIGHT MM KG/M
150 150 150
9.8 12.2 14.7
CB EV 50 LENGTH RANGE MM
750 - 1200 1350 - 1500 1650 - 1800 1950 - 2100 2250 - 2700
MAX UDL KN
15 15 20 20 26
DEPTH WEIGHT MM KG/M
103 103 131 138 192
5.2 6.4 7.4 7.6 11.3
CB EV 90
Overall Width Outer Leaf Cavity Inner Leaf
AT 90 - HEAVY DUTY LENGTH RANGE MM
LENGTH RANGE MM
750 - 2100 2250 - 2700
MAX UDL KN
20 20
DEPTH WEIGHT MM KG/M
160 185
7.9 13.0
290 to 325 100 90 to 110 100 to 115
750 - 1800 1950 - 2400 2550 - 2700
MAX UDL KN
35 35 35
DEPTH WEIGHT MM KG/M
150 150 150
9.8 12.2 14.7
Denotes plaster key
56
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS BIRTLEY LINTELS
100 Internal Walls
200-215 Solid Walls
Plastered both sides
SB 100 - STANDARD DUTY LENGTH RANGE MM
SBL 200 MEDIUM DUTY MAX UDL KN
750 - 1500 1650 - 1800 1950 - 2700 2850 - 3600 3900 - 4500 4800 5100
15 20 20 25 30 28 24
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
73 5.1 140 6.6 140 8.3 215 11.2 215 16.8 215 16.8 215 16.8
750 - 1500 1650 - 2100 2250 - 2700 2850 - 3000 3300 - 3600 3900 - 4500 4800 5100
MAX UDL KN
750 - 1500 1650 - 2700 2850 - 3600
25 40 45
DEPTH WEIGHT MM KG/M
140 215 215
6.6 14.0 16.8
142 9.0 142 10.1 142 11.3 218 13.8 219 17.2 220 20.3 220 20.3 215 20.3
OB 190 MEDIUM DUTY LENGTH RANGE MM
750 - 1500 1650 - 2100 2250 - 2550 2700 - 3000
SB 100 HDX - EXTRA HEAVY DUTY LENGTH RANGE MM
20 20 20 25 40 35 30 28
DEPTH WEIGHT MM KG/M
Can be supplied pre-insulated at a small extra charge
SB 100 HD - HEAVY DUTY LENGTH RANGE MM
MAX UDL KN
MAX UDL KN
750 - 1500 1650 - 2700
60 60
DEPTH WEIGHT MM KG/M
140 215
11.5 16.8
MAX UDL KN
9 12 20 20
DEPTH WEIGHT MM KG/M
90 95 160 160
5.7 9.3 10.2 12.2
DC 200 HEAVY DUTY LENGTH RANGE MM
750 - 2100 2250 - 3000 3300 - 3900 4200 - 4800
MAX UDL KN
60 50 50 30
DEPTH WEIGHT MM KG/M
225 225 225 225
15.3 15.3 18.4 18.4
140 Internal Walls Plastered both sides
SB 140 - STANDARD DUTY LENGTH RANGE MM
DC 200 HDX - EXTRA HEAVY DUTY MAX UDL KN
750 - 2100 2250 - 2700 2850 - 3600 3900 - 4200 4500 - 4800 5100
25 25 25 45 35 28
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
140 8.2 140 10.2 215 13.0 215 19.5 215 19.5 215 19.5
750 - 2100 2250 - 3900 4200 - 4800 5100
MAX UDL KN
100 60 50 30
DEPTH WEIGHT MM KG/M
225 31.1 225 31.1 225 31.1 225 31.1
SB 140 HD - HEAVY DUTY LENGTH RANGE MM
MAX UDL KN
750 - 1500 1650 - 2700 2850 - 3600
35 40 45
DEPTH WEIGHT MM KG/M
140 215 215
10.2 16.3 19.5
SB 140 HDX - EXTRA HEAVY DUTY LENGTH RANGE MM
750 - 1500 1650 - 2700
MAX UDL KN
60 60
DEPTH WEIGHT MM KG/M
140 215
14.5 19.5
Note: Max UDL figures may reduce if end bearings are less than 150mm. If in doubt check Technical Department Denotes plaster key
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
57
STEELWORK & LINTELS BIRTLEY LINTELS
100 External Walls TF 50 HD
MBL- LIGHT DUTY LENGTH RANGE MM
750 - 900 1050 - 1350 1500 - 2100
MAX UDL KN
2 4 5
DEPTH WEIGHT MM KG/M
LENGTH RANGE MM
50 80 85
750 - 2100 2250 - 3000 3300 - 4800
2.4 2.7 4.7
MAX UDL KN
12 15 10
DEPTH WEIGHT MM KG/M
185 185 185
8.8 10.1 11.2
Versions also available for other cavity widths Lintels above 1500 long should be propped. See notes opposite
Use in lightly loaded locations such as meter boxes, garage personnel doors etc. Lintels above 1200 long should be propped until lintel is fully loaded and brickwork has matured. Use horizontal timber spreader to avoid distorting lintel. Use single central prop for openings up to 2100. For larger openings use multiple props (max spacing 1200).
LA - MEDIUM DUTY LENGTH RANGE MM
750 - 1500 1650 - 1800 1950 - 2400 2550 - 3000 3300 - 3900
Lintels above 1500 long should be propped. See notes opposite
MAX UDL KN
6 6 10 13 8
DEPTH WEIGHT MM KG/M
90 119 158 215 215
Restraining clips (supplied) should be fixed to timber frame using 3 No 3.3mm Dia x 50 long galvanised nails.
4.5 5.3 6.2 7.5 7.5
Clip should overlap lintel by 12mm as indicated by line on clip.
Use to carry outer leaf and provide support for cavity tray where inner leaf is existing or supported separately.
EV 100 - HEAVY DUTY LENGTH RANGE MM
750 - 1500 1650 - 2100 2250 - 3000 3300 - 4800
MAX UDL KN
15 20 15 20
DEPTH WEIGHT MM KG/M
150 150 225 225
5.2 7.7 9.6 15.5
Internal Walls - Non Load Bearing INT 100 - LIGHT DUTY LENGTH RANGE MM
Lintels above 3000 long should be propped. See notes opposite
MAX UDL KN
900 - 1200
100 External Walls
5
20
1.9
INT 100 HD - HEAVY DUTY LENGTH RANGE MM
TF 50 LENGTH RANGE MM
750 - 2100 2250 - 3000 3300 - 3900
Pinch batten must be used with TF 50 lintels
DEPTH WEIGHT MM KG/M
MAX UDL KN
8 10 10
750 - 2100
DEPTH WEIGHT MM KG/M
185 185 185
4.6 5.9 7.0
Versions also available for other cavity widths
MAX UDL KN
10
DEPTH WEIGHT MM KG/M
50
3.3
Semicircular Arches Overall Width Outer Leaf
275 to 315 100
LINTEL REF:
MAX UDL KN
SC 600 SC 630 SC 900 SC 915 SC 1200 SC 1500
20 20 20 20 20 20
Cavity Inner Leaf WEIGHT KG
140 wide mesh to inner leaf
10 11 15 15 20 25
OPENING MM
75 to 100 100 to 125 RADIUS MM
LENGTH MM
600 300 900 630 315 930 900 450 1200 915 457.5 1215 1200 600 1500 1500 750 1800
A separate shaped cavity tray should be used with all semicircular lintels Denotes plaster key
58
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS KEYSTONE LINTELS
HI-THERM LINTEL Leading the way with the development of a completely unique lintel range to address the thermal requirements of new building regulations.
Hi-Therm Lintel A hybrid of Glass Reinforced Plastic (GRP) & Galvanised Steel. When combined, these two materials form the ultimate in lintel design. Psi 0.05 W/m.K
The Benefits • GRP has very low thermal conductivity and therefore when used to support
the outer leaf in cavity wall construction, cold bridging is significantly reduced.
• Galvanised steel, which has a much higher load bearing capacity than GRP, is used to support the heavier load on the inner leaf of the cavity wall.
Key Performance Features
‘h’ nom.
• Outperforms all other lintels on Thermal Performance. • Outperforms even stainless steel for corrosion resistance. • Outperforms stainless steel on price. • Building regulations require that lintels should be assessed for their effect on
100
the thermal performance of a building. The thermal performance of a lintel is expressed in terms of Psi Values (ψ) i.e. linear thermal transmittance.
95
Cavity
PSI Comparison Chart • To help understand the immense thermal benefits of the HiTherm Lintel it must be compared to other lintel types.
BRE • The thermal performance of the Hi-Therm Lintel has been evaluated by the Building Research Establishment (BRE) and achieved a Psi value of 0.05 W/m.K.
HT/S 100 HT/S 130 HT/S 150 Manufactured length 150mm increments Height ‘h’ Thickness Load ratio 3:1 Load ratio 19:1
90-100mm cavity 120-135mm cavity 140-155mm cavity
HT/HD 100 HT/HD 130 HT/HD 150
6002100
22502400
25503000
31503600
135 2.5 21 17
150 2.9 23 18
200 3.2 27 20
250 3.2 26 19
Portsmouth 023 92 385 656
Lintel type comparison Keystone Hi-Therm Lintel Typical Keystone Lintel Non-plated Steel Lintel (default) Plated Steel Lintel (default)
Manufactured length 150mm increments Height ‘h’ Thickness Load ratio 19:1
sales@strukta.co.uk
Psi values 0.05 W/m-K 0.25 W/m-K 0.3 W/m-K 0.5 W/m-K
90-100mm cavity 120-135mm cavity 140-155mm cavity 6001500
16502550
27003600
225 3.2 30
250 3.2 40
250 5.0 35
www.strukta.co.uk
59
STEELWORK & LINTELS KEYSTONE LINTELS
Standard Loading, 50-70mm Cavity
S/K-50 Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
‘h’ nom.
95
48
600 1350 1650 1950 2250 2550 2850 3150 3750 4200* 1200 1500 1800 2100 2400 2700 3000 3600 4000 4800* 79 1.6 12 10
98 1.8 14 12
110 2 19 16
134 2 21 17
150 2 21 19
172 2 26 22
172 2.5 27 20
209 2.9 27 20
209 2.9 26 19
209 3.2 27 22
100
Heavy Duty Loading, 50-70mm Cavity
‘h’ nom.
95
48
HD/K-50
600 1350 1650* 2250* 2700* 3150* 3750* 1200 1500 2100* 2550* 3000* 3600* 4200*
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
105 2.9 30 22
121 2.9 30 22
171 2.9 40 35
209 2.9 40 35
209 3.2 40 35
209 3.2 35 32
209 3.2 33 28
100
Standard Loading, 70-90mm Cavity
S/K-70 ‘h’ nom.
95
68
100
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
600 1350 1650 1950 2250 2550 3150 3750 4200* 1200 1500 1800 2100 2400 3000 3600 4000 4800* 98 1.6 12 10
89 1.8 14 12
106 2 18 14
130 2 21 17
142 2 21 19
168 2.5 27 22
204 2.9 27 20
204 2.9 26 19
204 3.2 27 22
Standard Loading, 70-90mm Cavity WIL
S/K-70 WIL ‘h’ nom.
95
125
68
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
600 1500 1950 2250 2550 3150* 3750* 1350 1650 1800 2100 2400 3000 3600* 4200* 93 2 12 10
90 2 13 11
110 2 20 17
134 2 19 17
158 2 24 20
167 2.5 27 21
192 3.2 30 26
192 3.2 27 25
Heavy Duty Loading, 70-90mm Cavity
‘h’ nom.
95
68
100
HD/K-70
600 1350 1650* 2250* 2700* 3150* 3750* 1200 1500 2100* 2550* 3000* 3600* 4200*
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
103 2.9 30 22
117 2.9 30 22
167 2.9 40 35
205 2.9 40 35
205 3.2 40 35
205 3.2 35 32
205 3.2 33 28
Heavy Duty Loading, 70-90mm Cavity
229
95
68
100
CFS/K-70
600 1650 2250 3150 4200 1500 2100 3000 4000 4800
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
229 2.9 70 10
229 2.9 60 12
229 2.9 50 16
229 3.2 45 17
229 3.2 40 19
*Continuous bottom plate
60
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS KEYSTONE LINTELS
Standard Loading, 90-110mm Cavity
S/K-90
600 1350 1650 1950 2250 2550 2850 3150 3750 4200* 1200 1500 1800 2100 2400 2700 3000 3600 4000 4800*
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
88 1.6 12 10
88 1.8 16 13
107 2 19 16
125 2 21 17
150 2 23 18
162 2.5 27 22
171 2.5 27 20
200 2.9 27 20
200 2.9 26 19
200 3.2 27 22
‘h’ nom.
100
95
88
Standard Loading, 90-110mm Cavity WIL
S/K-90 WIL
600 1350 1950 2550 3150* 3750* 1200 1800 2400 3000 3600* 4200*
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
92 2 13 11
107 2 17 14
150 2 23 18
177 2.5 24 18
188 3.2 30 26
188 3.2 27 25
‘h’ nom.
125
88
95
Heavy Duty Loading, 90-110mm Cavity
HD/K-90
600 1350* 1650* 2250* 2700* 3150* 3750* 1200 1500* 2100* 2550* 3000* 3600* 4200*
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
110 2.9 30 22
135 2.9 30 22
163 2.9 40 35
203 2.9 40 35
203 3.2 40 35
203 3.2 35 32
203 3.2 33 28 100
Heavy Duty Loading, 90-110mm Cavity WIL
HD/K-90 WIL
600 1350* 1650* 1950* 2250* 1200 1500* 1800* 2100* 2700*
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
113 2.9 20 17
135 2.9 25 22
165 2.9 35 27
165 2.9 30 25
600 1650 2250 3150 4200 1500 2100 3000 4000 4800
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
229 2.9 70 11
229 3.2 45 18
95
‘h’ nom.
125
CFS/K-90
229 2.9 50 18
88
188 3.2 36 32
Heavy Duty Loading, 90-110mm Cavity
229 2.9 60 14
‘h’ nom.
88
95
229 3.2 40 26
229
100
88
95
GOOD PRACTICE: • Make sure you allow a minimum of 150mm bearing each end when ordering your lintels • Build up both inside and outside skin together to avoid lintel deflection • To achieve loading figures on CFS/K lintels, they must be installed with blockwork built in as shown above
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
61
STEELWORK & LINTELS KEYSTONE LINTELS
Standard Loading, 110-130mm Cavity
S/K-110 Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
‘h’ nom. 95
108
600* 1650* 1950* 2250* 3150* 4200* 1500* 1800* 2100* 3000* 4000* 4800* 95 2 16 13
121 2 22 18
145 2.5 24 18
195 2.9 27 22
195 3.2 26 19
195 3.2 25 20
100
Heavy Duty Loading, 110-130mm Cavity
HD/K-110 Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
‘h’ nom.
95
108
600* 1650* 2250* 3150* 3750* 1500* 2100* 3000* 3600* 4000* 125 2.9 30 20
145 2.9 30 22
195 2.9 35 30
195 3.2 32 28
195 3.2 30 26
100
Heavy Duty Loading, 110-130mm Cavity
229
95
108
CFS/K-110
600 1650 2250 3150 4200 1500 2100 3000 4000 4800
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
229 2.9 70 10
229 2.9 60 12
229 2.9 50 16
229 3.2 45 17
229 3.2 40 19
100
Standard Loading, 130-150mm Cavity
S/K-130 ‘h’ nom. 95
128
100
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
600* 1650* 1950* 2250* 3150* 4200* 1500* 1800* 2100* 3000* 4000* 4800* 103 2 16 13
128 2 22 18
190 2.5 24 18
190 2.9 27 22
190 3.2 26 19
190 3.2 25 20
Heavy Duty Loading,130-150mm Cavity
HD/K-130 ‘h’ nom.
95
128
100
Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
600* 1650* 2250* 3150* 3750* 1500* 2100* 3000* 3600* 4000* 115 2.9 30 20
155 2.9 30 22
190 3.2 35 30
190 3.2 30 25
212 3.2 30 26
Heavy Duty Loading, 130-150mm Wide Cavity Lintels
229
95
128
CFS/K-130
600 1650 2250 3150 4200 1500 2100 3000 4000 4800
Height ‘h’ Thickness Total UDL kn 19:1
229 2.9 70
229 2.9 60
229 2.9 50
229 3.2 45
229 3.2 40
100
*Continuous bottom plate
62
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS KEYSTONE LINTELS
Standard Loading, 150-165mm Cavity
S/K-150 Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
600* 1650* 1950* 2250* 3150* 4200* 1500* 1800* 2100* 3000* 4000* 4800* 100 2 16 13
125 2 22 18
180 2.5 24 18
180 2.9 27 22
180 3.2 26 19
180 3.2 25 20
‘h’ nom. 100
95
148
Heavy Duty Loading, 130-150mm Cavity
HD/K-150 Height ‘h’ Thickness Total UDL kn 3:1 Total UDL kn 19:1
600* 1650* 2250* 3150* 3750* 1500* 2100* 3000* 3600* 4000* 125 2.9 30 20
160 2.9 30 22
180 3.2 35 30
180 3.2 30 25
200 3.2 30 26
‘h’ nom.
100
95
148
Heavy Duty Loading, 150-165mm Cavity
CFS/K-150
600 1650 2250 3150 4200 1500 2100 3000 4000 4800
Height ‘h’ Thickness Total UDL kn 19:1
229 2.9 70
229 2.9 60
229 2.9 50
229 3.2 45
229
229 3.2 40 100
Extra Heavy Duty 50-110mm Cavity
95
148
• To achieve loading figures, lintel must be laterally restrained. Lintel must be suitably propped during construction.
• X/K lintel range is available to suit 110-165mm cavity widths, e.g. specify X/K-110, X/K-130 and X/K-150.
• Manufactured Length to customers requirements.
X/K-50/70/90
600 4800 5200 5400 5800 6200 6600
End bearing Total UDL kn
200 75
200 86
200 70
200 65
200 60
203 x 133 x 30kg/m UB inner leaf
Galvanised steel flange to outer leaf
200 55
Nominal
SUPPORT FOR THE BUILDER • FREE take off/scheduling service • On-site technical assistance • Structural performance calculations • Weekly deliveries from the factory ensures quick turnaround on special lintels
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
63
STEELWORK & LINTELS KEYSTONE LINTELS
Eaves Lintels 50-80mm Cavity
EL/K-50 Height ‘h’ Thickness Total UDL kn
40 48
600 1650 2250 2550 1500 2100 2400 2700 95 2 18
134 2 20
150 2 22
150 2.5 25
100
Eaves Lintels 85-120mm Cavity
• The EL/K-50 range can be supplied to suit 150mm inner leaf e.g.specify EL/K-50 WIL. • For standard loading conditions at eaves level as a composite beam. To achieve loading figures lintel must be built in with blockwork and wall plate as shown.
EL/K-90 Height ‘h’ Thickness Total UDL kn
40
88
600 1650 2250 2550 1500 2100 2400 2700 95 2 18
134 2 20
150 2 22
150 2.5 25
100
Internal Wall Lintels
• For standard loading conditions to support internal openings in 100mm thick walls. The INT/K range can be supplied to suit 75mm wide walls e.g. specify INT/K 60.
100
28
INT/K-100
900
Max Span Total UDL kn with 150mm coursing Total UDL kn with 225mm coursing
700 5 10
Overall Length 1050 1100 1200 850 5 10
900 5 10
1000 5 10
Solid Wall Lintels
• For light duty loading conditions for 215mm solid wall construction. • To achieve loading figures, lintel must be built in with block/brickwork as shown and suitably propped during construction.
SW/K Height ‘h’ Thickness Total UDL kn
‘h’ nom.
1200 1650 2100 2700 55 86 86 113 2.5 6 18
2.5 8 20
2.9 8 22
3.2 10 25
195
Heavy Duty Loading, Solid Wall Lintels
• For heavy duty loading conditions for 215mm solid wall construction. • To achieve loading figures, lintel must be built in with block/brickwork as shown and suitably propped during construction.
152
IB/K (2c)
600 1950 2250 1800 2100 3000
Height ‘h’ Thickness Total UDL kn
152 2.5 30
152 2.9 30
152 3.2 30
195
64
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS KEYSTONE LINTELS
Heavy Duty Loading, Solid Wall Lintels
• For heavy duty loading conditions for 215mm solid wall construction. • To achieve loading figures, lintel must be built in with block/brickwork as shown and suitably propped during construction.
IB/K (3c)
600 1950 2250 3150 4200 1800 2100 3000 4000 4800
Height ‘h’ Thickness Total UDL kn
227 2.5 45
227 2.5 40
227 2.9 40
227 3.2 40
227 3.2 35
227
Single Leaf Lintels
195
• For use to support the outer leaf of cavity wall construction. • The SB/K lintel should be suitably propped during construction. The SB/K lintel can be supplied with no top bend (e.g.specify ANG/K).
SB/K
600 1500 1950 2400 1350 1800 2250 2700
Height ‘h’ Thickness Total UDL kn
80 3.2 2.5
100 3.2 5
150 3.2 7
200 3.2 8 ‘h’ nom.
95
Single Leaf Lintels
Optional factory fitted Cavity Closer (spec. SB/Kcc)
• For use to support single leaf or outer leaf of cavity wall construction. • To achieve loading figures, lintel must be built in with brickwork as shown and be suitably propped during construction.
SL/K
600 1500 1950 2550 2850 1350 1800 2400 2700 3000
Height ‘h’ Thickness Total UDL kn
150 2.5 16
150 2.5 20
225 2.5 20
225 2.9 12
‘h’ nom.
225 3.2 12 95
Timber Frame Lintels
• For use with timber frame construction. The T/K lintel must be used in conjunction with
lateral restraint clips and a tight fitting timber batten, as shown, to prevent twisting. The T/K range can be supplied to suit wider cavities: e.g. specify T/K-70, T/K-90.
T/K-50/70/90
600 1800 2550 3150 1650 2400 3000 4800
Height ‘h’ Thickness Total UDL kn
102 2.5 5
155 2.5 8
185 2.9 9
Lateral restraint clips at 500mm centres fixed with 4mm x 50mm galvanised nails
250 3.2 12 ‘h’ nom.
95 Nominal
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
65
STEELWORK & LINTELS KEYSTONE LINTELS
Box Lintels
• Used to support internal openings in 100mm
wide walls. (Can be insulated as optional extra).
95
600 1650 1800
BOX/K-75
75 Perforated steel for plaster key
Height ‘h’ Thickness Total UDL kn
75 1.6 15
75 2 10
Box Lintels
• Used to support internal or external openings with 100mm wide walls. (Can be insulated as optional extra).
95
95
600 1650 1950 2550 2850 3750 4200 1500 1800 2400 2700 3600 4000 4800
BOX/K-100
95
Height ‘h’ Thickness Total UDL kn
215
150
75
75 2 18
150 1.6 18
150 2 25
150 2 20
215 2.5 35
215 2.5 30
215 2.5 24
Heavy Duty Loading, Box Lintels
Perforated steel for plaster key
• For heavy duty loading conditions to support internal or external openings with 100mm wide wall. (Can be insulated as optional extra).
‘h’ nom.
HDBOX/K-100
600 1350 1950 1200 1800 2700
Height ‘h’ Thickness Total UDL kn
150 2.5 50
150 2.5 45
215 2.5 40
95
Perforated steel for plaster key
Box Lintels
• Used to support internal or external openings with
150mm wide walls. (Can be insulated as optional extra).
145 ‘h’ nom.
Perforated steel for plaster key
BOX/K-150
600 1950 2550 2850 3750 4200 1800 2400 2700 3600 4000 4800
Height ‘h’ Thickness Total UDL kn
150 1.6 18
150 2 25
150 2 20
215 2.5 35
215 2.5 30
215 2.5 24
Heavy Duty Loading, Box Lintels
• For heavy duty loading conditions to support internal or external openings with 150mm wide wall. (Can be insulated as optional extra).
‘h’ nominal
Perforated steel for plaster key
66
HDBOX/K-150
600 1350 1950 2550 1200 1800 2700 2700
Height ‘h’ Thickness Total UDL kn
150 2.5 50
150 2.5 45
215 2.5 40
150 2.5 25
145
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS KEYSTONE LINTELS
Box Lintels
• Used to support internal or external openings with 215mm wide wall. (Can be insulated as optional extra).
BOX/K-200
600 1950 2550 2850 3750 4200 1800 2400 2700 3600 4000 4800
Height ‘h’ Thickness Total UDL kn
150 1.6 18
150 2 25
150 2 20
215 2.5 35
215 2.5 30
215 2.5 24
‘h’ nominal
200 Perforated steel for plaster key
Heavy Duty Loading, Box Lintels
• For heavy duty loading conditions to support internal or external openings with 215mm wide wall. (Can be insulated as optional extra).
HDBOX/K-200
600 1350 1950 1200 1800 2700
Height ‘h’ Thickness Total UDL kn
150 2.5 50
150 2.5 45
‘h’ nominal
215 2.5 40 200
Perforated steel for plaster key
SUN LOUNGE LINTELS SUPPLIED IN ANY SIZE TO SUIT YOUR REQUIREMENTS
Spot Welded Plaster Key
Fully Filled Insulated Cavity It’s as easy as...
1
Portsmouth 023 92 385 656
Steel Corner Posts Includes Base Plate
Factory Fitted Location Spigots
3
2
sales@strukta.co.uk
www.strukta.co.uk
67
STEELWORK & LINTELS BESPOKE LINTELS
Your custom-made world of Bespoke Lintels strukta is leading the way in supplying bespoke Steel Lintels. Our Technical Team are pushing back the boundaries in Steel Lintel design, providing custom-made lintels with short lead-times. For further information on the following lintels or to discuss your ‘special ideas’ please contact our technical department.
Welcome to the wonderful world of strukta ‘Special’ Lintels. At strukta we are renowned for our technical knowledge and assistance, especially when custom-made lintels are required. strukta provides lintel solutions to architects, builders, merchants, and end-users.
Full Arch Lintel
Segmental Arch
Bow Lintel
68
Square Bay Lintel
Splayed Bay Lintel
Venetian Arch Lintel
Corner Lintel
Apex Lintel
Parabolic Arch Lintel
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS ARCH BOARDS
ARCH BOARDS CODE
DESCRIPTION
Unit Qty
AFPW0475
Arch Board White Plastic 450-500mm
Each
AFPW0625
Arch Board White Plastic 600-650mm
Each
AFPW0675
Arch Board White Plastic 655-705mm
Each
AFPW0775
Arch Board White Plastic 725-775mm
Each
AFPW0825
Arch Board White Plastic 800-850mm
Each
AFPW0925
Arch Board White Plastic 900-950mm
Each
AFPW1075
Arch Board White Plastic 1025-1075mm
Each
AFPW1125
Arch Board White Plastic 1110-1160mm
Each
AFPW1225
Arch Board White Plastic 1200-1250mm
Each
AFPW1375
Arch Board White Plastic 1325-1375mm
Each
AFPW1525
Arch Board White Plastic 1500-1550mm
Each
AFPW1675
Arch Board White Plastic 1600-1650mm
Each
AFPW1775
Arch Board White Plastic 1760-1810mm
Each
AFPW1925
Arch Board White Plastic 1900-1950mm
Each
AFPW2125
Arch Board White Plastic 2100-2150mm
Each
AFPW2225
Arch Board White Plastic 2225-2275mm
Each
AFPW2375
Arch Board White Plastic 2300-2350mm
Each
AFPW2425
Arch Board White Plastic 2400-2450mm
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
69
STEELWORK & LINTELS STRUCTURAL STEELWORK
70
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
STEELWORK & LINTELS STRUCTURAL STEELWORK
Forming an integral part of strukta is our steelwork division With over 30 years of continuous service to the construction sector, we have the expertise and more importantly the experience to manage all projects, whatever the size. strukta, is founded on the same platform that has always set us apart – service coupled with our founding principles of honesty and integrity – we guarantee you a satisfying and professional experience.
It all starts with ideas… let strukta turn your ideas into reality! From the first designs, we can assist in making sure your project happens. We will provide take-offs and where necessary arrange site visits, produce working drawings and assist in providing structural calculations. We will personally see your project through to completion – on time. From the draughtsmen to the installers on site, strukta staff are knowledgeable, experienced and trained. It’s all about real project management. With collective experience of hundreds of years, our fabricators and installers are skilled and fully equipped for projects both in the workshop and on-site. From intricate detailing on bespoke balconies to large structural steel frames, strukta craftsmen have the experience and ability to perform. No matter what size your scheme is, we will mutually work with you and to your program and in all this you can be rest assured that we fully conform to all aspects of current Health and Safety regulations.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
71
STEELWORK & LINTELS CLAMP FITTINGS
Clamp Fittings Clamp fittings are a versatile, durable product for industrial handrailing applications, easily assembled with our pre-cut tube service. Once aware of your requirements, we can provide a package of clamps, tube and base plates specifically for your project. Please use this chart to identify your requirements or send us a plan for a free scheduling service. A:
Clamp fittings
SIZE TO FIT
B: SIZE TO FIT Clamp fittings are a versatile durable product for industrial handrailing applications, easily assembled C: SIZE TO FIT with our pre-cut tube service. Once aware of your requirements we can provide a package of clamps, D: SIZE TO FIT tube and base plates specifically for your job and despatch direct to site, ready for immediate assembly. Use this chart to identify your requirements or send us a construction plan for our estimate. E: SIZE TO FIT
26.9mm O.D. TUBE 33.7mm O.D. TUBE 42.4mm O.D. TUBE 48.3mm O.D. TUBE 60.3mm O.D. TUBE
901
902
905
906
908
909
910
A
A
A
A
D
A
A
B
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
E
E
E
E
912
913
914
916
917
920
921
A
A
A
A
A
B
B C
B
B
C
B
B
B
C
C
D
D
C
C
C
D
D
D
D
D
E
E
E
E
E
922
923
924
925
927
928
929
B
A
A
A
A
B
B
C
B
B
B
B
C
C
D
D
D
E
C
C
C
C
D
D
D
D
E
930
931
932
933
940
942
943
B
A
A
A
B
B
B
C
B
B
B
C
C
C
D
C
C
C
D
D
D
D
D
D
E
E
E
944
945
946
948
950
951
955
B
B
B
A
A
A
B
C
C
C
B
B
B
C
D
D
D
C
C
C
D
D
D
D
E
E
E
956
957
958
959
960
961
963
A
A
A
A
A
A
A
B
B
B
B
B
B
B
C
C
C
C
C
C
C
D
D
D
D
D
D
D
E
E
E
E
E
E
E
964
965
956
969
972
974
975
A
A
A
A
B
D48
D48
B
B
B
B
C
C
C
C
C
D
D
D
D
D
E
E
E
Galvanised Steel Tube
DDA Compatible Clamp Fittings
Galvanised steel tube is available from stock in cut lengths to suit your requirements.
This provides a continuous handrail that complies to part ‘M’ building regulations 2004, using easily assembled components.
72
Salisbury 01722 414 011
704
707
709
704
703
740
708
705
sales@strukta.co.uk
www.strukta.co.uk
BUILDERS METALWORK
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
73
BUILDERS METALWORK JOIST HANGERS & JOIST CAPS
• Hook over joist hanger for
MASONRY JOIST HANGERS - RETURN CODE
DESCRIPTION
Unit Qty
HM20047R100
Masonry Return Hanger 200 x 47 x 100mm
Each
HM22547R100
Masonry Return Hanger 225 x 47 x 100mm
Each
HM20091R100
Masonry Return Hanger 200 x 91 x 100mm
Each
HM22591R100
Masonry Return Hanger 225 x 91 x 100mm
Each
HM200100R100
Masonry Return Hanger 200 x 100 x 100mm
Each
HM225100R100
Masonry Return Hanger 225 x 100 x 100mm
Each
supporting timber joists, beams, and trussed rafters on masonry walls.
Hook Over and Straddle Hangers available in all sizes to order Call sales office for details
STANDARD JOIST HANGERS (JIFFY) 270mm LONG CODE
DESCRIPTION
Unit Qty
HTS38
Jiffy Hanger 38mm
Each
HTS47
Jiffy Hanger 47mm
Each
HTS50
Jiffy Hanger 50mm
Each
HTS63
Jiffy Hanger 63mm
Each
HTS75
Jiffy Hanger 75mm
Each
HTS91
Jiffy Hanger 91mm
Each
HTS100
Jiffy Hanger 100mm
Each
• A single piece, non welded joist • •
hanger for supporting timber joists from timber members. 270mm leg. Nail every hole with square twist nails.
LONG LEG JOIST HANGERS 450mm LONG CODE
DESCRIPTION
Unit Qty
HTL38
Long Leg Hanger 38mm
Each
HTL47
Long Leg Hanger 47mm
Each
HTL50
Long Leg Hanger 50mm
Each
HTL63
Long Leg Hanger 63mm
Each
HTL75
Long Leg Hanger 75mm
Each
HTL91
Long Leg Hanger 91mm
Each
HTL100
Long Leg Hanger 100mm
Each
HTL125
Long Leg Hanger 125mm
Each
HTL150
Long Leg Hanger 150mm
Each
HTS47
info • Product designed for use where timber
JOIST CAPS CODE
DESCRIPTION
Unit Qty
CJ225050
Joist Cap 50mm
Each
CJ225075
Joist Cap 75mm
Each
CJ225100
Joist Cap 100mm
Each
CJ225150
Joist Cap 150mm
Each
• • • •
joists are built in to a masonry external wall. Satisfies the requirement of Document L Robust Solution. BBA and NHBC Approved. Eliminates air leakage problems associated with shrinkage of timber joists. Easy and quick to fit.
CJ225050
CJ225075
74
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BUILDERS METALWORK TRUSS SHOES, CLIPS & FACE FIX HANGERS
SQUARE TWIST NAILS CODE
DESCRIPTION
Unit Qty
NSST3037
Square Twist Nails Sherardised 30 x 3.75mm 25kg
25Kg
NPSST3037
Square Twist Nails Sherardised 30 x 3.75mm 2.5kg
2.5Kg
• Use with all joist hangers, •
brackets and clips. Nail every hole.
info
MONO TRUSS SHOES CODE
DESCRIPTION
Unit Qty
HMT38
Mono Truss Shoe 38mm
Each
HMT50
Mono Truss Shoe 50mm
Each HMT50
HEAVY DUTY FACE FIX HANGERS CODE
DESCRIPTION
Unit Qty
HTM24050
Maxi Joist Hanger 50 x 240mm
Each
HTM240100
Maxi Joist Hanger 100 x 240mm
Each
HTM33550
Maxi Joist Hanger 50 x 335mm
Each
HTM38038
Maxi Joist Hanger 38 x 380mm
Each
HTM38050
Maxi Joist Hanger 50 x 380mm
Each
HTM38063
Maxi Joist Hanger 63 x 380mm
Each
HTM38075
Maxi Joist Hanger 75 x 380mm
Each
HTM380100
Maxi Joist Hanger 100 x 380mm
Each
HTM50038
Maxi Joist Hanger 38 x 500mm
Each
HTM50050
Maxi Joist Hanger 50 x 500mm
Each
HTM50063
Maxi Joist Hanger 63 x 500mm
Each
HTM50075
Maxi Joist Hanger 75 x 500mm
Each
HTM500100
Maxi Joist Hanger 100 x 500mm
Each
HTM62050
Maxi Joist Hanger 50 x 620mm
Each
HTM620100
Maxi Joist Hanger 100 x 620mm
Each
HTM620150
Maxi Joist Hanger 150 x 620mm
Each
CODE
DESCRIPTION
Unit Qty
CT38
Truss Clip 38mm
Each
CT50
Truss Clip 50mm
Each
• Heavy duty maxi
• •
joist hanger for supporting timber to timber or timber to masonry. Hangers have bolt holes for 12mm fasteners into the face. To determine the leg length: overall length before being formed (380mm) less width of timber (50mm) ÷ 2 = leg length (165mm).
TRUSS CLIPS
• For attaching
trusses and rafters to wall plates to provide wind restraints.
CT50
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
75
BUILDERS METALWORK LIGHT & HEAVY STRAP
GALVANISED LIGHT STRAP 30 x 2.5mm CODE
DESCRIPTION
Unit Qty
SL03B10
Vertical Restraint Strap Bent 300 x 100mm
Each
SL06B10
Vertical Restraint Strap Bent 600 x 100mm
Each
SL06T15
Vertical Restraint Strap Twisted 600 x 150mm
Each
SL10B10
Vertical Restraint Strap Bent 1000 x 100mm
Each
SL10T15
Vertical Restraint Strap Twisted 1000 x 150mm
Each
SL12T12
Vertical Restraint Strap Twisted 1200 x 150mm
Each
SL12B10
Vertical Restraint Strap Bent 1200 x 100mm
Each
SL02
Restraint Strap Straight 200mm
Each
SL1000
Restraint Strap Straight 1000mm
Each
SL3000
Restraint Strap Straight 3000mm
Each
SL1000
SL10T15
SL10B10
• 30 x 2.5mm galvanised strap for vertical restraint. • Wallplate straps should be at least 1 metre long, and spaced at no more than 2 metre centres.
• Hole diameter 6mm. • Stainless Steel available to order.
SH12B15T10 SL10T15
GALVANISED HEAVY STRAP 30 x5mm
SH15B15
CODE
DESCRIPTION
Unit Qty
SH06B10
Lateral Restraint Strap Bent 600 x 100mm
Each
SH10B10
Lateral Restraint Strap Bent 1000 x 100mm
Each
SH12B10
Lateral Restraint Strap Bent 1200 x 100mm
Each
SH12B15
Lateral Restraint Strap Bent 1200 x 150mm
Each
SH12T15
Lateral Restraint Strap Twisted 1200 x 150mm
Each
SH15B10
Lateral Restraint Strap Bent 1500 x 100mm
Each
SH15B15
Lateral Restraint Strap Bent 1500 x 150mm
Each
SH16B15
Lateral Restraint Strap Bent 1800 x 150mm
Each
SH12B15T10
Lateral Restraint Bent / Twist 1200 x 150 x 100mm
Each
SH10T15
Lateral Restraint Strap Twisted 1000 x 150mm
Each
SH1000
Restraint Strap Straight 1000mm
Each
SH3000
Restraint Strap Straight 3000mm
Each
SH12B10
SH12T15 SH1000
• 30 x 5mm galvanised • • •
76
multi-holed strap for horizontal lateral restraint. They should be spaced at no more than 2 metre centres and attached to at least three timber members. Hole diameter 6mm. Stainless Steel available to order.
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BUILDERS METALWORK MASONRY JOIST HANGERS
MASONRY JOIST HANGERS CODE
DESCRIPTION
Unit Qty
HM10038
Timber to Masonry Hanger 38 x 100mm
Each
HM12538
Timber to Masonry Hanger 38 x 125mm
Each
HM15038
Timber to Masonry Hanger 38 x 150mm
Each
HM17538
Timber to Masonry Hanger 38 x 175mm
Each
HM20038
Timber to Masonry Hanger 38 x 200mm
Each
HM22538
Timber to Masonry Hanger 38 x 225mm
Each
HM25038
Timber to Masonry Hanger 38 x 250mm
Each
HM10050
Timber to Masonry Hanger 50 x 100mm
Each
HM12550
Timber to Masonry Hanger 50 x 125mm
Each
HM15050
Timber to Masonry Hanger 50 x 150mm
Each
HM17550
Timber to Masonry Hanger 50 x 175mm
Each
HM20050
Timber to Masonry Hanger 50 x 200mm
Each
HM22550
Timber to Masonry Hanger 50 x 225mm
Each
HM25050
Timber to Masonry Hanger 50 x 250mm
Each
HM10063
Timber to Masonry Hanger 63 x 100mm
Each
HM12563
Timber to Masonry Hanger 63 x 125mm
Each
HM15063
Timber to Masonry Hanger 63 x 150mm
Each
HM17563
Timber to Masonry Hanger 63 x 175mm
Each
HM20063
Timber to Masonry Hanger 63 x 200mm
Each
HM22563
Timber to Masonry Hanger 63 x 225mm
Each
HM25063
Timber to Masonry Hanger 63 x 250mm
Each
HM10075
Timber to Masonry Hanger 75 x 100mm
Each
HM12575
Timber to Masonry Hanger 75 x 125mm
Each
HM15075
Timber to Masonry Hanger 75 x 150mm
Each
HM17575
Timber to Masonry Hanger 75 x 175mm
Each
HM20075
Timber to Masonry Hanger 75 x 200mm
Each
HM22575
Timber to Masonry Hanger 75 x 225mm
Each
HM25075
Timber to Masonry Hanger 75 x 250mm
Each
HM100100
Timber to Masonry Hanger 100 x 100mm
Each
HM125100
Timber to Masonry Hanger 100 x 125mm
Each
HM150100
Timber to Masonry Hanger 100 x 150mm
Each
HM175100
Timber to Masonry Hanger 100 x 175mm
Each
HM200100
Timber to Masonry Hanger 100 x 200mm
Each
HM225100
Timber to Masonry Hanger 100 x 225mm
Each
HM250100
Timber to Masonry Hanger 100 x 250mm
Each
HM150125
Timber to Masonry Hanger 125 x 150mm
Each
HM175125
Timber to Masonry Hanger 125 x 175mm
Each
HM200125
Timber to Masonry Hanger 125 x 200mm
Each
HM225125
Timber to Masonry Hanger 125 x 225mm
Each
HM250125
Timber to Masonry Hanger 125 x 250mm
Each
HM100150
Timber to Masonry Hanger 150 x 100mm
Each
HM150150
Timber to Masonry Hanger 150 x 150mm
Each
HM175150
Timber to Masonry Hanger 150 x 175mm
Each
HM200150
Timber to Masonry Hanger 150 x 200mm
Each
HM225150
Timber to Masonry Hanger 150 x 225mm
Each
HM250150
Timber to Masonry Hanger 150 x 250mm
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
HM22550
TIP 1
Joist hanger heights 150mm and greater will be 10mm shorter than joist heights, to allow for notching.
TIP 2
A minimum height of 675mm of set masonry must be in position above the supporting flange before any load is applied.
www.strukta.co.uk
77
BUILDERS METALWORK CONNECTORS & ANGLE BRACKETS
BLOCK & BEAM HANGERS CODE
DESCRIPTION
Unit Qty
CFBB145
Block & Beam Ceiling Fix 145mm
Each
CFBB195
Block & Beam Ceiling Fix 195mm
Each
• Block and beam hangers are for
hanging timber fixing battens under a concrete beam & block floor.
OTHER CONNECTORS CODE
DESCRIPTION
CFBB145
Unit Qty
SBFG1020
Fixing Band 20mm x 10m
Roll
SBFS1020
St/St Fixing Band 20mm x 10m
Roll
PS40061
Splice Plates 400 x 61 x 18mm
Pk 4
PS55080
Splice Plates 550 x 80 x 18mm
Pk 4
PS55098
Splice Plates 550 x 90 x 18mm
Pk 4
THW25
High Wind Ties 1.2mm Steel
Each
THW4
High Wind Ties 0.9mm Steel
Each
PM24
Mending Nail Plate 50 x 100mm
Each
PM36
Mending Nail Plate 75 x 150mm
Each
PNS3872
Nail Stoppers 38 x 72mm
Each
AF100
Framing Anchors 100mm
Each
ASP38
Sole Plate Anchors 38mm
Each
ASP50
Sole Plate Anchors 50mm
Each
HRRC50
Ridge Rafter Connector 50mm
Each
CFBB195
PS55080
SBF1020
MP24
• Fixing band is a multi holed galvanised banding for all types of light fixing applications.
• Splice plates are suitable for butt jointing timbers of • • • •
similar cross section. Manufactured from 1.2mm thick galvanised steel. Joint consists of four pieces. All nail holes must be used. Minimum timber thickness 50mm. High wind ties are designed to provide ties for trusses and rafters likely to be subject to high winds. Used in pairs. Nail stoppers are for protection of plumbing and electrical wiring against random nailing into timber stud. Framing anchors are 1.2mm galvanised ties for securing a wide range of connections, when framing timber. The bending slot allows instant, accurate bending on site to suit many applications. Sole plate anchors are for attaching timber sole plates to concrete floors. Suitable to shot fire into concrete see page 76 for shot fire nails and cartridges.
THW2.5
PNS3872
AF100
ANGLE BRACKETS
BA150150
CODE
DESCRIPTION
Unit Qty
BA0640
Angle Bracket 60 x 40 x 63mm
Each
BA9090
Angle Bracket 90 x 90 x 63mm
Each
BA90150
Angle Bracket 90 x 150 x 63mm
Each
BA150150
Angle Bracket 150 x 150 x 63mm
Each
BA30030
Angle Plate 300 x 30mm
Each
BS352525
Angled Stretcher Bracket 35 x 25 x 25mm
100
BA9090
BA0640
BA90150 BA330
78
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
BUILDERS METALWORK CAM PLATES & JOIST STRUTS
CAM PLATES CODE
DESCRIPTION
Unit Qty
PC076100
Cam Plate 76 x 100mm
Each
PC076152
Cam Plate 76 x 150mm
Each
PC152051
Cam Plate 152 x 51mm
Each
PC150300
Cam Plate 152 x 300mm
Each
PC103152
Cam Plate 103 x 152mm
Each
PC103203
Cam Plate 103 x 203mm
Each
PC103254
Cam Plate 103 x 254mm
Each
PC103305
Cam Plate 103 x 305mm
Each
PC144178
Cam Plate 144 x 178mm
Each
PC144203
Cam Plate 144 x 203mm
Each
HERRINGBONE JOIST STRUTS CODE
DESCRIPTION
Unit Qty
SH400
Herringbone Joist Strut 400mm
Each
SH600
Herringbone Joist Strut 600mm
Each
GALVANISED TYING WIRE
WTG10
CODE
DESCRIPTION
Unit Qty
WTG10
1.0mm x ½kg Galvanised Tying Wire
½kg
WTG16
1.6mm x ½kg Galvanised Tying Wire
½kg
WTG20
2.0mm x ½kg Galvanised Tying Wire
½kg
keeps the roof on the construction industry with the NEW roofing nail Designed for fixing battens and counter battens. NailFire’s addition to the D-head nail range can save up to three hours work per roof!
FAST! EASY! SIMPLE! • Fixing Batten data available • Pull through capacity • Withdrawal capacity
• Shear capacity • Safe working load • Full Range Available
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
79
BUILDERS METALWORK DECKING PRODUCTS
FENCE & DECKING PRODUCTS CODE
DESCRIPTION
Unit Qty
SAP10
Post Anchor Support 70-110mm
Each
BPA100
Adjustable Post Base for 100 x 100mm post
Each
BP089089
Stand Off Post Base 89 x 89mm
Each
BP100100
Stand Off Post Base 100 x 100mm
Each
BP133133
Stand Off Post Base 133 x 133mm
Each
BPR100
Rigid Post Base 100 x 100mm
Each
BARG
Galvanised Arris Rail Bracket
Each
SDC4550
Coated Decking Screw 4.5 x 50mm
Bx 200
SDC4560
Coated Decking Screw 4.5 x 60mm
Bx 200
SDC4570
Coated Decking Screw 4.5 x 70mm
Bx 200
SDC4580
Coated Decking Screw 4.5 x 80mm
Bx 200
Allow 50mm minimum embedment when choosing screw length
BP100100
BPA100
SAP10
BPR100
BP133133
SDC4560
BP100100
BARG
80
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
NAILS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
81
NAILS BRIGHT NAILS
BRIGHT ROUND WIRE NAILS CODE
DESCRIPTION
Unit Qty
NBRW5026
Round Wire Nails Bright 50 x 2.65mm
25Kg
NBRW6533
Round Wire Nails Bright 65 x 3.35mm
25Kg
NBRW7537
Round Wire Nails Bright 75 x 3.75mm
25Kg
NBRW1C45
Round Wire Nails Bright 100 x 4.50mm
25Kg
BRIGHT ANNULAR RING SHANK NAILS CODE
DESCRIPTION
Unit Qty
NBAR2020
Annular Ring Shank Nails Bright 20 x 2.00mm 25Kg
NBAR2520
Annular Ring Shank Nails Bright 25 x 2.00mm 25Kg
NBAR3026
Annular Ring Shank Nails Bright 30 x 2.36mm 25Kg
NBAR4026
Annular Ring Shank Nails Bright 40 x 2.65mm 25Kg
NBAR5026
Annular Ring Shank Nails Bright 50 x 2.65mm 25Kg
NBAR6533
Annular Ring Shank Nails Bright 65 x 3.35mm 25Kg
NBAR7537
Annular Ring Shank Nails Bright 75 x 3.75mm 25Kg
NBAR1C50
Annular Ring Shank Nails Bright 100 x 5.00mm
25Kg
NBAR1X50
Annular Ring Shank Nails Bright 125 x 5.00mm
25Kg
• General purpose nails for various internal applications. • Ring shank provides good pull-out resistance. • Oval brads minimise splitting of timber. The oval head, when
punched below the surface, leaves a very small hole to be filled.
• Lost heads are small round headed nails for second fix carpentry.
BRIGHT NAILS
INFORMATION
NBRW5026
NBAR6533
BRIGHT OVAL BRAD NAILS
NBB05033
CODE
DESCRIPTION
Unit Qty
NBBO4026
Oval Brad Nails Bright 40 x 2.65mm
25Kg
NBBO5033
Oval Brad Nails Bright 50 x 3.35mm
25Kg
BRIGHT LOST HEAD NAILS
82
CODE
DESCRIPTION
Unit Qty
NBL4023
Lost Head Nails Bright 40 x 2.36mm
25Kg
NBL5030
Lost Head Nails Bright 50 x 3.00mm
25Kg
NBL6533
Lost Head Nails Bright 65 x 3.35mm
25Kg
NBL7537
Lost Head Nails Bright 75 x 3.75mm
25Kg
Salisbury 01722 414 011
NBL5030
sales@strukta.co.uk
www.strukta.co.uk
NAILS STEEL & GALVANISED NAILS • Clout nails have a large head for various uses including roofing &
GALVANISED ROUND WIRE NAILS
plasterboarding.
CODE
DESCRIPTION
Unit Qty
NGRW2518
Round Wire Nails Galvanised 25 x 1.80mm
25Kg
NGRW3020
Round Wire Nails Galvanised 30 x 2.00mm
25Kg
NGRW4023
Round Wire Nails Galvanised 40 x 2.36mm
25Kg
NGRW5026
Round Wire Nails Galvanised 50 x 2.65mm
25Kg
NGRW6526
Round Wire Nails Galvanised 65 x 2.65mm
25Kg
NGRW6533
Round Wire Nails Galvanised 65 x 3.35mm
25Kg
NGRW7537
Round Wire Nails Galvanised 75 x 3.75mm
25Kg
NGRW1C45
Round Wire Nails Galvanised 100 x 4.50mm
25Kg
NGRW1X56
Round Wire Nails Galvanised 125 x 5.60mm
25Kg
NGRW1L60
Round Wire Nails Galvanised 150 x 6.00mm
25Kg
• ELH clout nail for felt roofing, such as timber sheds. • Galvanised nail for fixing plasterboard. Jagged shank provides extra holding strength.
• Electro zinc plated ring shank nail for fixing plasterboard. • Springhead nails have a twisted square shank and are used for securing roof sheets and insulation.
• Slab nails have a large flat washered head for fixing and securing insulation to timber and soft masonry.
NGRW5026
GALVANISED CLOUT NAILS STD HEAD CODE
DESCRIPTION
Unit Qty
NGC3026
Clout Nails Standard Head Galv. 30 x 2.65mm
25Kg
NGC4026
Clout Nails Standard Head Galv. 40 x 2.65mm
25Kg
NGC5026
Clout Nails Standard Head Galv. 50 x 2.65mm
25Kg
NGC6526
Clout Nails Standard Head Galv. 65 x 2.65mm
25Kg
NGC7537
Clout Nails Standard Head Galv. 75 x 3.75mm
25Kg
NGC1C45
Clout Nails Standard Head Galv. 100 x 4.50mm
25Kg
NGC5026
GALVANISED CLOUT NAILS ELH CODE
DESCRIPTION
Unit Qty
NGCE1530
Clout Nails ELH Galv. 15 x 3.00mm
25Kg
NGCE2030
Clout Nails ELH Galv. 20 x 3.00mm
25Kg
NGCE2530
Clout Nails ELH Galv. 25 x 3.00mm
25Kg
NGCE3030
Clout Nails ELH Galv. 30 x 3.00mm
25Kg
NGCE4030
Clout Nails ELH Galv. 40 x 3.00mm
25Kg
NGCE5030
Clout Nails ELH Galv. 50 x 3.00mm
25Kg
PERFECT FOR
ROOFING FELT
NGCE1530
GALVANISED PLASTERBOARD NAILS CODE
DESCRIPTION
Unit Qty
NGP3026
Plasterboard Nails Galvanised 30 x 2.65mm
25Kg
NGP4026
Plasterboard Nails Galvanised 40 x 2.65mm
25Kg
NGP4026
DRYWALL NAILS EZP CODE
DESCRIPTION
Unit Qty
NED3026
Drywall Nails EZP 30 x 2.65mm
25Kg
NED4026
Drywall Nails EZP 40 x 2.65mm
25Kg
NED5026
Drywall Nails EZP 50 x 2.65mm
25Kg
NED6026
Drywall Nails EZP 60 x 2.65mm
25Kg
Portsmouth 023 92 385 656
sales@strukta.co.uk
NED5026
www.strukta.co.uk
83
NAILS STEEL & GALVANISED NAILS
SPRINGHEAD NAILS GALVANISED CODE
DESCRIPTION
Unit Qty
NGS6533
Springhead Nails Galvanised 65 x 3.35mm
10Kg NGS6533
SLAB NAILS GALVANISED CODE
DESCRIPTION
Unit Qty
NGS1033
Slab Nails Galvanised 100 x 3.35mm
10Kg
NGS1233
Slab Nails Galvanised 125 x 3.35mm
10Kg
NGS1537
Slab Nails Galvanised 150 x 3.75mm
10Kg
NGS1033
FENCING STAPLES GALVANISED CODE
DESCRIPTION
Unit Qty
NGS30
Fencing Staples Galvanised 30mm
25Kg
NGS40
Fencing Staples Galvanised 40mm
25Kg
NGS40
CUT CLASP NAILS - SELF COLOUR CODE
DESCRIPTION
Unit Qty
NSCC65
Cut Clasp Nails Self Colour 65mm
25Kg
NSCC75
Cut Clasp Nails Self Colour 75mm
25Kg
NSCC10
Cut Clasp Nails Self Colour 100mm
25Kg
SPECIALIST NAILS
• Clasp nails are a traditional fixing for timber to brickwork. • Rose heads are a traditional authentic nail for various decorative fixings.
• Pipe nails are a traditional fixing for cast iron rainwater downpipes.
NSCC75
CUT ROSE HEAD NAILS - GALVANISED CODE
DESCRIPTION
Unit Qty
NGCR150
Cut Rose Head Nails Galvanised 50mm
1Kg
NGCR165
Cut Rose Head Nails Galvanised 65mm
1Kg
NGCR175
Cut Rose Head Nails Galvanised 75mm
1Kg
NGCR110
Cut Rose Head Nails Galvanised 100mm
1Kg
NGCR175
PIPE NAILS - SELF COLOUR
84
CODE
DESCRIPTION
Unit Qty
NPBP7580
Pipe Nails Self Colour 75 x 8.00mm
1Kg
NPBP1080
Pipe Nails Self Colour 100 x 8.00mm
1Kg
Salisbury 01722 414 011
NPBP7480
sales@strukta.co.uk
www.strukta.co.uk
NAILS SHERADISED NAILS
ANNULAR RING SHANK NAILS SHERADISED CODE
DESCRIPTION
Unit Qty
NSAR4026
Annular Ring Shank Nails Sher'd 40 x 2.65mm
25Kg
NSAR5026
Annular Ring Shank Nails Sher'd 50 x 2.65mm
25Kg
NSAR6533
Annular Ring Shank Nails Sher'd 65 x 3.35mm
25Kg
NSAR7537
Annular Ring Shank Nails Sher'd 75 x 3.75mm
25Kg
NSAR1C50
Annular Ring Shank Nails Sher'd 100 x 5.00mm
25Kg
NSAR1X50
Annular Ring Shank Nails Sher'd 125 x 5.00mm
25Kg
SHERADISED NAILS
• Sheradised coating enables these nails to be used externally for fencing and decking applications.
• Flooring nail with ring shank to provide good pull-out resistance. • Lost heads are a small round headed nail for second fix carpentry. • Square twist nails provide exceptional pull-out resistance when fixing joist hangers and other metalwork components.
• Panel pins are used for internal and external glazing beads and other trims.
ROUND LOST HEAD NAILS SHERADISED CODE
DESCRIPTION
Unit Qty
NSL4023
Round Lost Head Nails Sheradised 40 x 2.36mm
25Kg
NSL5030
Round Lost Head Nails Sheradised 50 x 3.00mm
25Kg
NSL6533
Round Lost Head Nails Sheradised 65 x 3.35mm
25Kg
NSL7537
Round Lost Head Nails Sheradised 75 x 3.75mm
25Kg
NSAR1X50
NSL6533
STANDARD PANEL PINS SHERADISED CODE
DESCRIPTION
Unit Qty
NSPP1512
Standard Panel Pins Sheradised 15mm
25Kg
NSPP2016
Standard Panel Pins Sheradised 20mm
25Kg
NSPP2516
Standard Panel Pins Sheradised 25mm
25Kg
NSPP3016
Standard Panel Pins Sheradised 30mm
25Kg
NSPP4016
Standard Panel Pins Sheradised 40mm
25Kg
NSPP2016
SQUARE TWIST NAILS SHERADISED CODE
DESCRIPTION
Unit Qty
NSST3075
Square Twist Nails Sheradised 30 x 3.75mm
25Kg
NSST4037
Square Twist Nails Sheradised 40 x 3.75mm
25Kg
Portsmouth 023 92 385 656
sales@strukta.co.uk
NSST3075
www.strukta.co.uk
85
NAILS 2.5kg GALVANISED NAIL PACKS
2.5kg PRE-PACK NAILS - BRIGHT CODE
DESCRIPTION
Unit Qty
NPBAR2020
Annular Ring Shank Nails Bright 20 x 2.00mm
2.5Kg
NPBAR6533
Annular Ring Shank Nails Bright 65 x 3.35mm
2.5Kg
NPBBO4026
Oval Brad Head Nails Bright 40mm
2.5Kg
NPBBO5026
Oval Brad Head Nails Bright 50mm
2.5Kg
NPBL6533
Lost Head Nails Bright 65 x 3.35mm
2.5Kg
NPSCFB65
Cut Floor Brad Nail 65mm Self Colour
2.5Kg
NPBRW2516 NPBAR6533
2.5kg PRE-PACK NAILS - SELF COLOUR CODE
DESCRIPTION
Unit Qty
NPSCC65
Cut Clasp Nails Self Colour 65mm
2.5Kg
NPSCC75
Cut Clasp Nails Self Colour 75mm
2.5Kg
NPSCC100
Cut Clasp Nails Self Colour 100mm
2.5Kg
NPSCFB65
Cut Floor Brad Nail 65mm Self Colour
2.5Kg
2.5kg PRE-PACK NAILS - GALVANISED CODE
86
DESCRIPTION
NPBL6533
NPGP3026
Unit Qty
NPGRW4026
Round Wire Nails Galvanised 40 x 2.65mm
2.5Kg
NPGRW5026
Round Wire Nails Galvanised 50 x 2.65mm
2.5Kg
NPGRW6526
Round Wire Nails Galvanised 65 x 2.65mm
2.5Kg
NPGRW7537
Round Wire Nails Galvanised 75 x 3.75mm
2.5Kg
NPGRW1C45
Round Wire Nails Galvanised 100 x 4.50mm
2.5Kg
NPGRW1X56
Round Wire Nails Galvanised 125 x 5.60mm
2.5Kg
NPGRW1L60
Round Wire Nails Galvanised 150 x 6.00mm
2.5Kg
NPGC3026
Clout Nails Standard Head Galv. 30 x 2.65mm
2.5Kg
NPGC4026
Clout Nails Standard Head Galv. 40 x 2.65mm
2.5Kg
NPGCE2030
Clout Nails Xtra Large Head Galv. 20 x 3.00mm
2.5Kg
NPGP3026
Plasterboard Nails Galvanised 30 x 2.65mm
2.5Kg
NPGP4026
Plasterboard Nails Galvanised 40 x 2.65mm
2.5kg
NPGS6533
Spring Head Nails Galvanised 65 x 3.35mm
2.5Kg
NPGS1033
Slab Nails Galvanised 100 x 3.35mm
2.5Kg
NPGS1233
Slab Nails Galvanised 125 x 3.35mm
2.5Kg
NPGS1537
Slab Nails Galvanised 150 x 3.75mm
2.5Kg
NPGS20
Staples Galvanised 20mm
2.5Kg
NPGS25
Staples Galvanised 25mm
2.5Kg
NPGS30
Staples Galvanised 30mm
2.5Kg
NPGS40
Staples Galvanised 40mm
2.5Kg
Salisbury 01722 414 011
NPSCC65
NPSCFB65
NPGC4026
NPGS25
sales@strukta.co.uk
www.strukta.co.uk
NAILS PRE-PACKED NAILS & NAILFIRE
2.5kg PRE-PACK NAILS - SHERADISED CODE
DESCRIPTION
Unit Qty
NPSAR6533
Annular Ring Shank Nails Sheradised 65mm
2.5Kg
NPSPP2014
Panel Pin Standard Head Sher’d 20 x 1.4mm
2.5Kg
NPSPP2514
Panel Pin Standard Head Sher'd 25 x 1.4mm
2.5Kg
NPSPP3016
Panel Pin Standard Head Sher'd 30 x 1.6mm
2.5Kg
NPSPP4016
Panel Pin Standard Head Sher'd 40 x 1.6mm
2.5Kg
NPSST3037
Square Twist Nails Sheradised 30 x 3.75mm
2.5Kg
NPSRL4023
Sheradised Lost Heads 40 x 2.36mm
2.5Kg
NPSRL5030
Sheradised Lost Heads 50 x 3.00mm
2.5Kg
NPSRL6533
Sheradised Lost Heads 65 x 3.30mm
2.5Kg
NPSAR6533 NPSPP2514
NPSST3037
NPSPP4016
2.5kg PRE-PACK NAILS - EZP CODE
DESCRIPTION
Unit Qty
NPED3026
Drywall Nails EZP 30 x 2.65mm
2.5Kg
NPED4026
Drywall Nails EZP 40 x 2.65mm
2.5Kg
NPED6026
Drywall Nails EZP 60 x 2.65mm
2.5Kg
NPED4026
NEW range of premium nail guns NAILFIRE 1ST FIX GUN & NAILS CODE
DESCRIPTION
Unit Qty
NNFNFF
NailFire 1st Fix Cordless Gas Nailer
Each
NNFG5029
NailFire 1st Fix Nails E/Galv 50 x 2.9mm Ring
3000
NNFG6529
NailFire 1st Fix Nails E/Galv 65 x 2.9mm Ring
3000
NNFG6531
NailFire 1st Fix Nails E/Galv 65 x 3.1mm Ring
3000
NNFG7631
NailFire 1st Fix Nails E/Galv 76 x 3.1mm Ring
2000
NNFG9031
NailFire 1st Fix Nails E/Galv 90 x 3.1mm
2000
NPNFG5029
NailFire 1st Fix Nails Handy Pack E/Galv 50mm
1000
NPNFG6529
NailFire 1st Fix Nails Handy Pack E/Galv 65mm
1000
NPNFG7631
NailFire 1st Fix Nails Handy Pack E/Galv 76mm
1000
NPNFG9031
NailFire 1st Fix Nails Handy Pack E/Galv 90mm
1000
NNF1FC
NailFire Fuel Cell 1st Fix
Each
NailFire 1st Fix Gun Nails
• Fully compatible with Paslode IM350, Hitachi, BeA and Makita 1st Fix Nail Guns. • NailFire “Handy” packs now available for convenience. • Nails in a bucket ensures they are kept dry on site. • Our best selling Gun Nails!
NAILFIRE 2ND FIX GUN & NAILS CODE
DESCRIPTION
Unit Qty
NNFNFSS
NailFire 2nd Fix Brad Nailer Straight
Each
NNFGS25
NailFire 2nd Fix Straight Nails Galv 25mm
2000
NNFGS32
NailFire 2nd Fix Straight Nails Galv 32mm
2000
NNFGS38
NailFire 2nd Fix Straight Nails Galv 38mm
2000
NNFGS45
NailFire 2nd Fix Straight Nails Galv 45mm
2000
NNFGS51
NailFire 2nd Fix Straight Nails Galv 51mm
2000
NNFGS64
NailFire 2nd Fix Straight Nails Galv 64mm
2000
NNF2FC
NailFire 2nd Fix Fuel Cell
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
87
NAILS NAILFIRE & PASLODE NAILS
NAILFIRE 2ND FIX ANGLED BRADS CODE
DESCRIPTION
Unit Qty
NNFGAG32
NailFire Angled Brads & Gas Galv F16 32mm
2500
NNFGAG38
NailFire Angled Brads & Gas Galv F16 38mm
2500
NNFGAG45
NailFire Angled Brads & Gas Galv F16 45mm
2500
NNFGAG50
NailFire Angled Brads & Gas Galv F16 50mm
2500
NNFGAG63
NailFire Angled Brads & Gas Galv F16 63mm
2500
NNFGA32
NailFire Angled Brads No Gas Galv F16 32mm
2500
NNFGA38
NailFire Angled Brads No Gas Galv F16 38mm
2500
NNFGA45
NailFire Angled Brads & Gas Galv F16 45mm
2500
NNFGA50
NailFire Angled Brads No Gas Galv F16 50mm
2500
NNFGA63
NailFire Angled Brads No Gas Galv F16 63mm
2500
NNF2FC
NailFire 2nd Fix Fuel Cell
Each
PASLODE 1ST FIX - IM350 GUN & NAILS
PASLODE 1ST FIX - IM350 GUN & NAILS CODE
DESCRIPTION
Unit Qty
NP085010
IM350+ Paslode Impulse 1st Fix Nailer
Each
NP141204
IM350+ Nails Ring Galv. Plus 51x2.8mm
3300
NP141210
IM350+ Nails Ring Galv. Plus 63x2.8mm
3300
NP141227
IM350+ Nails Ring Galv. Plus 75x3.1mm
2200
NP141234
IM350+ Nails ST Galv. Plus 90x3.1mm
2200
NP141256
Handy Pack IM350+ Ring Galv. Plus 51x2.8mm
1100
NP141259
Handy Pack IM350+ Ring Galv Plus 63x2.8mm
1100
NP141265
Handy Pack IM350+ Ring HDGV 75x3.1mm
1100
NP141267
Handy Pack IM350+ ST HDGV 90x3.1mm
1100
NP141257
IM350+ Nails St/St 51 x 2.8mm
1100
NP141261
IM350+ Nails St/St 63 x 2.8mm
1100
NP141266
IM350+ Nails St/St 80 x 3.1mm
1100
• Large boxes of first fix nails designed to be used in the Paslode IM350 Impulse Nailer. Compatible with other nailers such as Hitachi, BeA and Makita. Range from 51mm - 90mm.
• Paslode “Handy” packs also available for convenience. • Stainless steel nails for use with the IM350 Nailer. For use in external applications such as cladding.
NP141256
88
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
NAILS PASLODE 1ST & 2ND FIX GUNS/NAILS
PASLODE 1ST FIX IM90i GUN & NAILS CODE
DESCRIPTION
Unit Qty
NP010333
IM90i Paslode Impulse 1st Fix Nailer
Each
NP142007
Ring Galv. Plus 51x2.8mm
3750
NP142013
Ring Galv. Plus 63x2.8mm
3750
NP142030
Ring Galv. Plus 75x3.1mm
2500
NP142037
ST Galv. Plus 90x3.1mm
2500
NP142039
Ring Galv. Plus 90x3.1mm
2500
• New Paslode IM90i cordless nailer, powered by
intelligent fuel injection system, making it reliable in all temperatures. Over 15% more powerful than other cordless nailers, will drive up to 90mm Ring shank nails. Fires round headed Nails. • A range of first fix full round head nails to suit. The new formula gas cells in the boxes enable this nailer to be used in extreme temperatures – from -15 to +46.
PASLODE POSITIVE REPLACEMENT PPN35i GUN & NAILS CODE
DESCRIPTION
Unit Qty
NP014091
PPN35i Paslode Positive Placement Nailer
Each
NP141185
PPN35i Hardened Twist Nails 3.4 x 35mm
2500
• The first cordless Positive Placement Nailer on the Market. • Drives 35mm hardened twist nails into timber. • Self Locating Probe.
PASLODE 2ND FIX IM65 GUN & NAILS CODE
DESCRIPTION
Unit Qty
NP013323
IM65 Paslode Impulse 2nd Fix Brad Nailer
Each
NP921586
IM65 Brad Nails Galv. F16 19mm
2000
NP921587
IM65 Brad Nails Galv. F16 25mm
2000
NP921588
IM65 Brad Nails Galv. F16 32mm
2000
NP921589
IM65 Brad Nails Galv. F16 38mm
2000
NP921590
IM65 Brad Nails Galv. F16 45mm
2000
NP921591
IM65 Brad Nails Galv. F16 50mm
2000
NP921592
IM65 Brad Nails Galv. F16 64mm
2000
NP921593
IM65 Brad Nails St/St F16 25mm
2000
NP921594
IM65 Brad Nails St/St F16 38mm
2000
NP921595
IM65 Brad Nails St/St F16 50mm
2000
NP921596
IM65 Brad Nails St/St F16 64mm
2000
• The IM65 nailer. A 16g straight brad nailer
for use in second fix applications, such as skirtings architraves and panelling. This light weight tool has been the professionals choice for many years.
info
• Straight brad nails to be used in the IM65 Brad Nailer. Range from 19 - 64mm.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
89
NAILS PASLODE GUNS & ACCESSORIES
PASLODE ANGLED 2ND FIX IM65A GUN/BRADS CODE
DESCRIPTION
Unit Qty
NP900600
IM65A Paslode Impulse Angled Brad Nailer
Each
NP300270
IM65A Angled Brad Nails Galvanised. 32mm
2000
NP300271
IM65A Angled Brad Nails Galvanised. 38mm
2000
NP300272
IM65A Angled Brad Nails Galvanised. 45mm
2000
NP300273
IM65A Angled Brad Nails Galvanised. 51mm
2000
NP300274
IM65A Angled Brad Nails Galvanised. 63mm
2000
• The IM65A has all the benefits
of the IM65 but with the advantage of having an angled nail magazine. This enables the gun to be used in tight spaces and corners.
• Angled brad nails to be used with the IM65A Brad Nailer. Range from 32mm - 63mm.
PASLODE ACCESSORIES CODE
DESCRIPTION
Unit Qty
NP300346
Paslode Fuel Cells Pink (IM350)
Pk 2
NP300341
Paslode Fuel Cells Yellow (IM65 & IM65A)
Pk 2
NP300348
Paslode Fuel Cells Gas (IM90i)
Pk 2
NP900352
Impulse Contact Element No Mark IM65
Each
NP404705
Impulse Contact Element No Mark IM350(S)
Each
NP012082
Impulse Contact Element No Mark IM350(M)
Each
NP900476
Charger Base
Each
NP900506
Charger Adapter
Each
NP900200
Charger Base & Adapter
Each
NP900507
In-Car Charger
Each
NP404717
Impulse Battery Cell
Each
NP013227
IM90i Battery Cell
Each
NP4401482
Lubricating Oil
Each
NP013060
Impulse Cleaning Kit
Each
NP115251
Cleaner
Each
• Replacement fuel cells for the
first (pink) & second (yellow) fix Paslode nailers.
• No-mark contact element
reduces unsightly surface damage to wood when fixing.
• Replacement charger systems for the Paslode impulse range of gas nailers.
• Replacement battery for the impulse nailers.
• Lubricating oil to maintain the impulse nailer system.
• Cleaning kit & cleaner to be
used with the impulse gas nailer system. Vital part of the ongoing maintenance of the tool.
• In-car charger enables the
operator to charge batteries whilst on the move.
IM350+
90
IM90i
Salisbury 01722 414 011
IM65
IM65A
sales@strukta.co.uk
PPN35i
www.strukta.co.uk
NAILS BALLISTIC & PULSA NAILS
BALLISTIC NAILS CODE
DESCRIPTION
Unit Qty
NB16
Ballistic Nails 16x3.7mm
100
NB19
Ballistic Nails 19x3.7mm
100
NB22
Ballistic Nails 22x3.7mm
100
NB27
Ballistic Nails 27x3.7mm
100
NB32
Ballistic Nails 32x3.7mm
100
NB42
Ballistic Nails 42x3.7mm
100
NB54
Ballistic Nails 54x3.7mm
100
NB62
Ballistic Nails 62x3.7mm
100
NB72
Ballistic Nails 72x3.7mm
100
NB82
Ballistic Nails 82x3.7mm
100
NBCL
Ballistic Cartridges Yellow Low
100
NBCM
Ballistic Cartridges Red Medium
100
NBCH
Ballistic Cartridges Black High
100
• Full range of nails for use with the DX450
cartridge gun & other compatible guns.
• Plastic washered nails for PA97 & compatible guns.
NBCM
NBCL
NBCH
NB22
PULSA 700E PINS CODE
DESCRIPTION
Unit Qty
NP046320
Pulsa 700 Concrete Nails C6/25
500
NP046350
Pulsa 700 Concrete Nails C6/40
500
PULSA P370 COLLATED PINS CODE
DESCRIPTION
Unit Qty
NP011340
P370 Collated Pins SC9/15
500
NP011341
P370 Collated Pins SC9/20
500
NP011344
P370 Collated Pins SC9/35
500
NP011346
P370 Collated Pins SC9/50
300
NP011347
P370 Collated Pins SC9/60
300
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
91
NAILS SPIT & MASONRY NAILS
P370 LOOSE PINS CODE
DESCRIPTION
Unit Qty
NP032500
P370 Loose Pins SC9/15
100
NP032510
P370 Loose Pins SC9/20
100
NP032950
P370 Loose Pins SC9/25
100
NP032920
P370 Loose Pins SC9/40
100
NP032910
P370 Loose Pins SC9/50
100
NP032900
P370 Loose Pins SC9/60
100
NP032890
P370 Loose Pins SC9/70
100
SPIT DISC CARTRIDGES CODE
DESCRIPTION
Unit Qty
NP031600
Green Disc Cartridges Low Strength
100
NP031700
Yellow Disc Cartridges Medium Strength
100
NP011658
Red Disc Cartridges High Strength
100
MASONRY NAILS CODE
DESCRIPTION
Unit Qty
NM25
Masonry Nails 25mm
200
NM30
Masonry Nails 30mm
200
NM40
Masonry Nails 40mm
200
NM50
Masonry Nails 50mm
100
NM60
Masonry Nails 60mm
100
NM70
Masonry Nails 70mm
100
NM80
Masonry Nails 80mm
100
NM100
Masonry Nails 100mm
100
HELICAL MULTIPURPOSE FIXINGS
92
CODE
DESCRIPTION
Unit Qty
FHS6050
Multipurpose Helical Fixing M6x50mm St/St
100
FHS670
Multipurpose Helical Fixing M6x70mm St/St
100
FHS6075
Multipurpose Helical Fixing M6x75mm St/St
100
FHS6100
Multipurpose Helical Fixing M6x100mm St/St
100
FHS6125
Multipurpose Helical Fixing M6x125mm St/St
100
FHS6140
Multipurpose Helical Fixing M6x140mm St/St
100
FHS6150
Multipurpose Helical Fixing M6x150mm St/St
100
FHS6160
Multipurpose Helical Fixing M6x160mm St/St
100
FHS6170
Multipurpose Helical Fixing M6x170mm St/St
100
FHS6190
Multipurpose Helical Fixing M6x190mm St/St
100
FHS6200
Multipurpose Helical Fixing M6x200mm St/St
100
FH26220
Multipurpose Helical Fixing M6x220mm St/St
100
FHS8075
Multipurpose Helical Fixing M8x75mm St/St
100
FHS8100
Multipurpose Helical Fixing M8x100mm St/St
100
FHS8125
Multipurpose Helical Fixing M8x125mm St/St
100
FHS8130
Multipurpose Helical Fixing M8x130mm St/St
100
FHS8195
Multipurpose Helical Fixing M8x195mm St/St
100
FHS8220
Multipurpose Helical Fixing M8x220mm St/St
100
FHS8245
Multipurpose Helical Fixing M8x245mm St/St
100
Salisbury 01722 414 011
A stainless steel helical fixing that is installed like a nail but holds like a screw. Excellent holding power when fixing counter battens
sales@strukta.co.uk
www.strukta.co.uk
NAILS NON FERROUS NAILS
NCC4033 NATP4045 NCT4045 NAC4026 NCAR2533
ALUMINIUM NAILS
COPPER NAILS
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
NATP3045
Aluminium Tile Pegs 30 x 4.5mm
1Kg
NCC3026
Copper Clouts 30 x 2.65mm
1Kg
NATP4045
Aluminium Tile Pegs 40 x 4.5mm
1Kg
NCC3033
Copper Clouts 30 x 3.35mm
1Kg
NATP5045
Aluminium Tile Pegs 50 x 4.5mm
1Kg
NCC3533
Copper Clouts 35 x 3.35mm
1Kg
NATP6545
Aluminium Tile Pegs 65 x 4.5mm
1Kg
NCC4026
Copper Clouts 40 x 2.65mm
1Kg
NAC3026
Aluminium Clouts 30 x 2.65mm
1Kg
NCC4033
Copper Clouts 40 x 3.35mm
1Kg
NAC3033
Aluminium Clouts 30 x 3.35mm
1Kg
NCC5026
Copper Clouts 50 x 2.65mm
1Kg
NAC4026
Aluminium Clouts 40 x 2.65mm
1Kg
NCAR2033
Copper Annular Rings 20 x 3.35mm
1Kg
NAC4033
Aluminium Clouts 40 x 3.35mm
1Kg
NCAR2533
Copper Annular Rings 25 x 3.35mm
1Kg
NAC4533
Aluminium Clouts 45 x 3.35mm
1Kg
NCT3045
Copper Tile Pegs 30 x 4.5mm
1kg
NAC5033
Aluminium Clouts 50 x 3.35mm
1Kg
NCT4045
Copper Tile Pegs 40 x 4.5mm
1kg
NAC6033
Aluminium Clouts 60 x 3.35mm
1kg
NCT5045
Copper Tile Pegs 50 x 4.5mm
1kg
NCT6545
Copper Tile Pegs 65 x 4.5mm
1kg
NAC6533
Aluminium Clouts 65 x 3.35mm
1Kg
NAC7033
Aluminium Clouts 70 x 3.35mm
1Kg
NAC7537
Aluminium Clouts 75 x 3.75mm
1Kg
NAC8033
Aluminium Clouts 80 x 3.35mm
1Kg
NAC8533
Aluminium Clouts 85 x 3.35mm
1Kg
NSSTP3030 NSSL5026
NSSAR6526 NSSPP4016
STAINLESS STEEL NAILS CODE
DESCRIPTION
Unit Qty
NSSTP3030
St/St Tile Pegs 30 x 3.0mm
1Kg
NSSAR2526
St/St Annular Rings 25 x 2.65mm
1Kg
NSSTP4040
St/St Tile Pegs 40 x 4.0mm
1Kg
NSSAR2533
St/St Annular Rings 25 x 3.35mm
1Kg
NSSTP5045
St/St Tile Pegs 50 x 4.5mm
1kg
NSSAR3026
St/St Annular Rings 30 x 2.65mm
1Kg
NSSPP2014
St/St Panel Pins 20 x 1.4mm
1Kg
NSSAR4026
St/St Annular Rings 40 x 2.65mm
1Kg
NSSPP2514
St/St Panel Pins 25 x 1.4mm
1Kg
NSSAR5030
St/St Annular Rings 50 x 2.65mm
1Kg
NSSPP3016
St/St Panel Pins 30 x 1.6mm
1Kg
NSSAR6526
St/St Annular Rings 65 x 3.35mm
1Kg
NSSPP4016
St/St Panel Pins 40 x 1.6mm
1Kg
NSSAR6533
St/St Annular Rings 65 x 3.35mm
1Kg
NSSL4026
St/St Lost Head Nails 40 x 2.65mm
1Kg
NSSAR7537
St/St Annular Rings 75 x 3.75mm
1Kg
NSSL5026
St/St Lost Head Nails 50 x 2.65mm
1Kg
NSSAR1C50
St/St Annular Rings 100 x 5.00mm
1Kg
NSSL6533
St/St Lost Head Nails 65 x 3.35mm
1Kg
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
93
NAILS NAIL COUNT TABLES
Approximate count of steel round wire nails per kg. Galvanised nails less approximately 10% Diameter Length (mm) (mm) 25 30 40 50 60 65 75 100 125 150 1.80 1847 1545 2.00 1446 1241 2.36 – 857 661 538 2.65 – – 542 441 372 346 3.00 – – – 342 3.35 – – – – 236 216 187 3.75 – – – – – – 145 4.50 – – – – – – – 79 5.60 – – – – – – – – 42 6.00 – – – – – – – – – 31
Approximate count of aluminium nails per kg Diameter Length (mm) (mm) 25 30 40 50 60 65 70 75
94
2.65 3.35 3.75 4.50
– 1848 1596 1225 – 1220 980 812 680 640 590 530 – – – – – – 460 420 – 600 490 390
Salisbury 01722 414 011
Approximate count of square twist nails per kg Dia. (mm)
Length 30 40
3.75 356 322
Approximate count of copper nails per kg Dia. Length (mm) (mm) 25 30 40 50 2.65 740 560 460 327 3.35 – 376 335 241
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
95
ROOFING PRODUCTS HELICAL FIXINGS & FELT
MINERAL FELT CODE
DESCRIPTION
Unit Qty
FGM20
Green Mineral Roofing Felt 20kg 1 x 10m
Roll
FGM38
Green Mineral Roofing Felt 38kg 1 x 10m
Roll
FUS1F1015
1F Underslaters Felt 1 x 15m
Roll
HELICAL ROOF FITTINGS CODE
DESCRIPTION
Unit Qty
FHH8135
Twistfix Insulation Panel Fixing 8 x 135mm
100
FHH8165
Twistfix Insulation Panel Fixing 8 x 165mm
100
FHH8195
Twistfix Insulation Panel Fixing 8 x 195mm
100
FHS6125
Helical Warm Roof Batten Fixings 125 x 6mm
50
FHS6140
Helical Warm Roof Batten Fixings 140 x 6mm
50
FHS6150
Helical Warm Roof Batten Fixings 150 x 6mm
50
FHS6160
Helical Warm Roof Batten Fixings 160 x 6mm
50
FHS6170
Helical Warm Roof Batten Fixings 170 x 6mm
50
FHS6190
Helical Warm Roof Batten Fixings 190 x 6mm
50
FHS6200
Helical Warm Roof Batten Fixings 200 x 6mm
50
FHST6
Support Tool M6
Each
FHPDSDS
Power Driver SDS
Each
Twistfix - Hammer driven fixings for securing structural 6mm plywood composite insulation board to flat roofs. Rotates as it is driven in, reducing the risk of timber splitting. Easy and fast installation, unique one-piece stress free fixing, larger helical section to prevent bending, 20mm head, excellent holding power, easy fixing selection, no drilling required, minimal compression of insulation and reduced thermal bridging.
Warm Roof Fixings - Specially designed for fixing insulation to rafters in warm roof situations. Stainless steel. Excellent holding characteristics. Other sizes available to order. Support tool recommended for lengths over 125mm. SDS driver / support tool is for use in SDS drills to speed up installation of helical fixings.
HEADLOK SCREWS CODE
DESCRIPTION
Unit Qty
SH115
Headlok Screws 115mm
250
SH125
Headlok Screws 125mm
250
SH150
Headlok Screws 150mm
250
SH175
Headlok Screws 175mm
250
SH200
Headlok Screws 200mm
250
SH225
Headlok Screws 225mm
250
SH250
Headlok Screws 250mm
250
SPH125
Headlok Screws 125mm
50
SPH150
Headlok Screws 150mm
50
SPH175
Headlok Screws 175mm
50
SPH200
Headlok Screws 200mm
50
SPH250
Headlok Screws 250mm
50
FHST6
FHS6200
FHS6125
heavy Duty flathead screws for an outstanding fixing for warm roofs
BREATHABLE ROOFING FELTS CODE
DESCRIPTION
Unit Qty
MB1050
Breathable Felt 1 x 50m (50m2)
Roll
MB1550
Breathable Felt 1.5 x 50m (75m2)
Roll
MBPF1050
Permo Forte Breathable Felt 1 x 50m (50m2)
Roll
MBPF1550
Permo Forte Breathable Felt 1.5 x 50m (75m2)
Roll
MBPA1050
Permo Air Breathable Felt 1.0 x 50m (50m2)
Roll
MRS1050
Roofshield Felt 1 x 50m (50m2)
Roll
MTY1550
Tyvek Supro Felt 1.5 x 50m (75m2)
Roll
MTYLJT50
D/S Tyvek Joint Tape 50mm x 25m
Roll
FUVP300
UV Protection Felt 5U 300mm x 10m
Roll
MPBF1550
MB1550 FUVP300
96
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS STAPLERS, TARPAULINS & FOIL INSULATION
HOUSE WRAP CODE
DESCRIPTION
MHW1410
Unit Qty
MHW1410
Tyvek House Wrap 1.4 x 100m
Roll
MUVF1550
UV Facade 1.5 x 50m
Roll
MBP420150
Sisalkraft Paper 420 (A1F) 1 x 50m
Roll
MBP4001100
Breather Paper 40 (4016) 1 x 100m
Roll
MKUP09100
Kraft Union Paper 900 x 100m
Roll
MBP4001100
FOIL INSULATION CODE
DESCRIPTION
Unit Qty
IMF1210
Multilayer Foil Insulation 1.2 x 10m
Roll
IFB1225
Foil Bubble Insulation 1.2 x 25m
Roll
TF50
Foil Tape 50mm x 45m
Roll
TF100
Foil Tape 100mm x 45m
Roll
IMF1210
STAPLERS & STAPLES CODE
DESCRIPTION
Unit Qty
SG50
Hammer Tacker T50
Each
SHT50
Stapler T50
Each
ST508
T50 Staples 8mm
5000
ST5010
T50 Staples 10mm
5000
ST5012
T50 Staples 12mm
5000
ST5014
T50 Staples 14mm
5000
SG50
ST5010
SHT50
TARPAULINS • Waterproof protection. • Tough woven, tear proof sheeting for water
CODE
DESCRIPTION
Unit Qty
TP4560
Polythene Tarpaulin 4.5 x 6.0m
Each
TP5470
Polythene Tarpaulin 5.4 x 7.0m
Each
• Nylon rope suitable for many applications
TP4590
Polythene Tarpaulin 4.5 x 9.0m
Each
RP0630
Polypropylene Rope 6mm x 30m
Each
• Premium tarpaulin is heavy duty reinforced,
RD622
Nylon Draw Rope 6mm x 220m
Each
RP06500
Blue Polypropylene Rope on Drum 6mm x 500m
Each
RN1030
Nylon Rope 10mm x 30m
Each
RP10220
Polypropylene Rope 10mm x 220m
Each
TP4050G
Premium Tarpaulin Green 4m wide x 5m long
Each
TP4050C
Premium Tarpaulin Clear 4m wide x 5m long
Each
TP4080G
Premium Tarpaulin Green 4m wide x 8m long
Each
TP4080C
Premium Tarpaulin Clear 4m wide x 8m long
Each
TP4010G
Premium Tarpaulin Green 4m wide x 10m long
Each
TP4010C
Premium Tarpaulin Clear 4m wide x 10m long
Each
tight protection complete with eyelets. including securing down tarpaulins. triple layer, UV protected.
RN1030
TP4050G TP4560
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
97
ROOFING PRODUCTS NETTING & GRP ACCESSORIES
NETTING & CABLE TIES CODE
DESCRIPTION
Unit Qty
BN250
Netlon Barrier 2 x 50m
Roll
ND250B
Debris Netting 2 x 50m
Roll
TC200B
Cable Ties Black 200 x 4.8mm
100
TC200N
Cable Ties Neutral 200 x 4.8mm
100
TC300B
Cable Ties Black 300 x 4.8mm
100
TC300N
Cable Ties Neutral 300 x 4.8mm
100
TC350B
Cable Ties Black 350 x 4.8mm
100
TC370B
Cable Ties Black 370 x 4.8mm
100
TC370N
Cable Ties Neutral 370 x 4.8mm
100
TC38076B
Cable Ties Black 380 x 7.6mm
100
• Netlon barrier is a strong plastic netting used to retain insulation between rafters and joists.
• Increase safety on scaffolding with debris netting, just cable tie it on.
GRP ACCESSORIES CODE
DESCRIPTION
Unit Qty
TV3T
Standard Tile Valley Trough 360mm x 3m
Each
TV3S
Slate Valley Trough 290mm x 3m
Each
TBG3
Bonding Gutter 225mm x 3m
Each
SG3
Secret Gutter GRP 3m
Each
TV3T
225
TV3S
160
TBG3
SG3 125
• Up to half the cost of lead installation. • 30 year guarantee. • Easy fitting.
98
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS ROOFING ACCESSORIES
ROOFING ACCESSORIES
• Spring head nails are large
• Hip irons are used to retain tiles • Eaves filler combs are to
washer head nails.
CODE
DESCRIPTION
Unit Qty
• Roofing washers are for use
NGS6533
Galvanised Spring Head Nails 65 x 3.35mm
10Kg
• Soakers are for use at
WP8
Roofing Washers Black M8 Hole
100
NDSG075
Drive Screws Galvanised 75mm
1Kg
NDSG0100
Drive Screws Galvanised 100mm
1Kg
NDSG0150
Drive Screws Galvanised 150mm
1Kg
WSW28CL
Sela Washers & Caps 28mm Clear
100
WSWCL
Sela Washers & Caps Small Clear
100
U1150
Undercloak 1m x 150mm
Each
SA150175
Aluminium Soakers 150 x 175mm
Each
SA300175
Aluminium Soakers 300 x 175mm
Each
RDC
Copper Disc Rivets
1000
HIG300
Galvanised Hip Iron 300 x 150 x 25 x 4mm
Each
CEF1
Eaves Filler Combs 1m
Each
TSE15
Underlay Support Tray 1.5m
Each
BWG25
Galvanised Wire Balloon 2.5" (65mm)
Each
BWG4
Galvanised Wire Balloon 4" (100mm)
Each
BWG6
Galvanised Wire Balloon 6" (150mm)
Each
BWG8
Galvanised Wire Balloon 8" (200mm)
Each
BWG9
Galvanised Wire Balloon 9" (225mm)
Each
RSG1502
Snow Guard 2m x 150mm
Each
RSGB
Snow Guard Brackets
Each
SSBS1
Bird Guard Spikes St/St
1m
on a hip roof.
with the spring head nails.
gable abutments or as a replacement for lead soakers around dormers.
• Copper disc rivets are the
traditional method for fixing slates and can also be used with man made slates.
prevent entry of birds, vermin and large insects into roof voids.
• Underlay support trays are
used to stop ponding at eaves and to support the roof at the verge.
• Wire balloons are to prevent entry of birds into chimneys.
HIG300
U1150
CEF1
WP8 WSW28CL
NDSG0100
RSG1502
RDC
SSBS1
BWG6
BWG4
SA300175
Portsmouth 023 92 385 656
SA150175
sales@strukta.co.uk
www.strukta.co.uk
99
ROOFING PRODUCTS SELF ADHESIVE FLASHBAND & LEAD FREE FLASHING
SLATE HOOKS CODE
DESCRIPTION
Unit Qty
SH30480
Slate Hook St/St Grade 304 80mm
1000
SH304100
Slate Hook St/St Grade 304 100mm
1000
SS30480
Slate Spike St/St Grade 304 80mm
1000
SS31680
Slate Spike St/St Grade 316 80mm
1000
SS304100
Slate Spike St/St Grade 304 100mm
1000
SS304110
Slate Spike St/St Grade 304 110mm
1000
SS316C117
Slate Spike St/St Grade 316 117mm Crossinated
1000
• A cost effective and quality alternative method of fixing slates. Available as batten hook or nail end hook
SH304100 SH30480 SS304100
SELF ADHESIVE FLASHBAND CODE
DESCRIPTION
Unit Qty
FB10010
Flashband 100mm x 10m
Roll
FB15010
Flashband 150mm x 10m
Roll
FB22510
Flashband 225mm x 10m
Roll
FB30010
Flashband 300mm x 10m
Roll
FB45010
Flashband 450mm x 10m
Roll
FBP1
Flashband Primer 1L
Can
• Can be used in all general
applications such as glazing bars, gutters and roofs.
• Porous or rough surfaces should be primed with bitumen primer.
LEAD FREE FLASHING UBIFLEX CODE
DESCRIPTION
Unit Qty
FLR15012
Lead Replacement Flashing 150mm x 12m
Roll
FLR20012
Lead Replacement Flashing 200mm x 12m
Roll
FLR25012
Lead Replacement Flashing 250mm x 12m
Roll
FLR30012
Lead Replacement Flashing 300mm x 12m
Roll
FLR40012
Lead Replacement Flashing 400mm x 12m
Roll
FLR5006
Lead Replacement Flashing 500mm x 6m
Roll
FLR6006
Lead Replacement Flashing 600mm x 6m
Roll
FLR10006
Lead Replacement Flashing 1000mm x 6m
Roll
• Non-lead flashing material which can be used in all applications where lead is traditionally used.
• BBA approved.
100
• 80% lighter than lead, 50% quicker to install.
• Can be used to form cavity trays and damp courses.
• Lead free - no scrap value.
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS LEAD ACCESSORIES
LEAD ACCESSORIES CODE
DESCRIPTION
Unit Qty
OP05
Patination Oil 0.5L
Each
OP10
Patination Oil 1.0L
Each
OP25
Patination Oil 2.5L
Each
CLSS
Hall Clips
50
CLSSL
Lead Clips St/St Large Complete with Tool
50
SL310
Lead Sealant 310ml
Tube
LSM25160
Multi Lead Slate 25-160mm
Each
LSP30100
Lead Slate 30° Pitched 100mm
Each
LSP45100
Lead Slate 45° Pitched 100mm
Each
LSS90100
Lead Slate 90° Straight 100mm
Each
LSP30150
Lead Slate 30° Pitched 150mm
Each
LDS20
Lead Dome Set (Pack of 20)
Each
UL125
Lead Underlay 1 x 25m
Roll
MS24
Mopstick 50 x 50mm x 2.4m
Each
LEJ2603
Lead Expansion Joint 260mm x 3m
Roll
SFS5020
St/St Fixing Strip 50mm x 20m
Roll
SFC5020
Copper Fixing Strip 50mm x 20m
Roll
SSC10150
Copper Slate Strap 150mm x 1mm
100
NCAR2533
Copper Annular Rings 25 x 3.35mm
1 Kg
NSSAR2533
St/St Annular Rings 25 x 3.35mm
1 Kg
• One coat of patination oil
• Lead underlay protects lead
should be applied to all leadwork.
from uneven roof decking and should always be used on lead sheet over 600mm wide.
• It helps prevent unsightly
staining on newly applied leadwork, and leaves it with a clean finish.
• Hall clips / stainless steel
clips used to secure lead flashing easily into masonry or brickwork. Easily pointed over. Up to 20 times faster than traditional methods.
• Lead multi slate is a 450mm lead square c/w a rubber mould to take 25-160mm pipes.
• Mopsticks are a PA timber
roll for forming joints on flat or pitched roofs.
• Fixing strips used for making clips to secure lead permanently in position.
• Copper ring shanks are for fixing lead flashings etc.
• Stainless steel ring shanks are for fixing zinc flashings etc.
CLSS
LSP45100 LDS20
MS24 LEJ2603
LS310
NSSAR2533
NCAR2533
UL125
SFC5020
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
101
ROOFING PRODUCTS LEAD FLASHING
LEAD FLASHING - CODE 3-5 CODE
DESCRIPTION
Unit Qty
LM53300
Lead Code 5 - 3m x 300mm [23Kg]
Roll
LM33150
Lead Code 3 - 3m x 150mm [7Kg]
Roll
LM56300
Lead Code 5 - 6m x 300mm [46Kg]
Roll
LM36150
Lead Code 3 - 6m x 150mm [13Kg]
Roll
LM53390
Lead Code 5 - 3m x 390mm [30Kg]
Roll
LM33240
Lead Code 3 - 3m x 240mm [11Kg]
Roll
LM56390
Lead Code 5 - 6m x 390mm [59Kg]
Roll
LM36240
Lead Code 3 - 6m x 240mm [22Kg]
Roll
LM53450
Lead Code 5 - 3m x 450mm [34Kg]
Roll
LM33300
Lead Code 3 - 3m x 300mm [13Kg]
Roll
LM56450
Lead Code 5 - 6m x 450mm [69Kg]
Roll
LM36300
Lead Code 3 - 6m x 300mm [27Kg]
Roll
LM53600
Lead Code 5 - 3m x 600mm [46Kg]
Roll
LM33390
Lead Code 3 - 3m x 390mm [17Kg]
Roll
LM56600
Lead Code 5 - 6m x 600mm [91Kg]
Roll
LM36390
Lead Code 3 - 6m x 390mm [35Kg]
Roll
LM43150
Lead Code 4 - 3m x 150mm [9Kg]
Roll
LM53760
Lead Code 5 - 3m x 760mm [58Kg]
Roll
LM56760
Lead Code 5 - 6m x 760mm [116Kg]
Roll
LM53914
Lead Code 5 - 3m x 914mm [70Kg]
Roll
LM46150
Lead Code 4 - 6m x 150mm [18Kg]
Roll
LM56914
Lead Code 5 - 6m x 914mm [139Kg]
Roll
LM43240
Lead Code 4 - 3m x 240mm [15Kg]
Roll
LM531000
Lead Code 5 - 3m x 1000mm [76Kg]
Roll
LM46240
Lead Code 4 - 6m x 240mm [29Kg]
Roll
LM561000
Lead Code 5 - 6m x 1000mm [152Kg]
Roll
LM43300
Lead Code 4 - 3m x 300mm [18Kg]
Roll
LM531100
Lead Code 5 - 3m x 1100mm [84Kg]
Roll
LM46300
Lead Code 4 - 6m x 300mm [37Kg]
Roll
LM561100
Lead Code 5 - 6m x 1100mm [168Kg]
Roll
LM43390
Lead Code 4 - 3m x 390mm [24Kg]
Roll
LM531200
Lead Code 5 - 3m x 1200mm [91Kg]
Roll
LM46390
Lead Code 4 - 6m x 390mm [48Kg]
Roll
LM561200
Lead Code 5 - 6m x 1200mm [183Kg]
Roll
LM43450
Lead Code 4 - 3m x 450mm [28Kg]
Roll
LM531400
Lead Code 5 - 3m x 1400mm [107Kg]
Roll
LM561400
Lead Code 5 - 6m x 1400mm [213Kg]
Roll
LM46450
Lead Code 4 - 6m x 450mm [55Kg]
Roll
LM43600
Lead Code 4 - 3m x 600mm [37Kg]
Roll
LM46600
Lead Code 4 - 6m x 600mm [73Kg]
Roll
LM43760
Lead Code 4 - 3m x 760mm [47Kg]
Roll
LM46760
Lead Code 4 - 6m x 760mm [93Kg]
Roll
LM43914
Lead Code 4 - 3m x 914mm [56Kg]
Roll
LM46914
Lead Code 4 - 6m x 914mm [112Kg]
Roll
LM411000
Lead Code 4 - 1m x 1000mm [20Kg]
Roll
LM411200
Lead Code 4 - 1m x 1200mm [24Kg]
Roll
LM431000
Lead Code 4 - 3m x 1000mm [61Kg]
Roll
LM461000
Lead Code 4 - 6m x 1000mm [122Kg]
Roll
LM431200
Lead Code 4 - 3m x 1200mm [73Kg]
Roll
LM461200
Lead Code 4 - 6m x 1200mm [147Kg]
Roll
LM431400
Lead Code 4 - 3m x 1400mm [86Kg]
Roll
LM461400
Lead Code 4 - 6m x 1400mm [172Kg]
Roll
• Milled lead is pressed and rolled from virgin material and is
produced to exacting standards making quality very consistent.
102
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS NAIL FIRE
keeps the roof on the construction industry with the NEW roofing nail
Designed for fixing battens and counter battens. NailFire’s addition to the D-head nail range can save up to three hours work per roof!
FAST! EASY! SIMPLE! • Fixing batten data available • Pull through capacity • Withdrawal capacity
Portsmouth 023 92 385 656
• Shear capacity • Safe working load • Full range available
sales@strukta.co.uk
www.strukta.co.uk
103
ROOFING PRODUCTS TILE VENTS
UNIVERSAL TILE VENTS CODE
DESCRIPTION
Unit Qty
VR985403
Universal Vent Tile Base & Cap Antique Red
Each
VR985434
Universal Vent Tile Base & Cap Terracotta
Each
VR985430
Universal Vent Tile Base & Cap Slate Grey
Each
VR985436
Universal Vent Tile Base & Cap Brown
Each
VR979800
Universal & Slate Vent Adaptor Pack
Each
• A ventilating tile which suits most popular interlocking and plain tile profiles for roofs with a pitch over 17.5°.
• Can be used for roof ventilation at high or low level, and can be used for soil ventilation or mechanical extraction when used with an adaptor (VR979800).
• Universal fitting to suit all popular profiles in new or reroofing situations.
VR985434 VR979800
TILE VENTS CODE
DESCRIPTION
Unit Qty
VR991803
Uni-Plain Tile Vent Antique Red
Each
VR991834
Uni-Plain Tile Vent Terracotta
Each
VR991830
Uni-Plain Tile Vent Slate Grey
Each
VR991836
Uni-Plain Tile Vent Brown
Each
VRA992800
Uni-Plain Tile Vent Adaptor Pack
Each
• Uni-plain vent can be used for soil and mechanical ventilation when used with an adaptor. An in-line ventilation tile which suits most clay and concrete plain tiles. Colour matching available.
VR991836 VRA992800
KLOBER TILE VENTS CODE
104
DESCRIPTION
Unit Qty
VR9856AR
Klober Tile Vent Flat Antique Red
Each
VR9856TC
Klober Tile Vent Flat Terracotta
Each
VR9856SG
Klober Tile Vent Flat Slate Grey
Each
VR9856BN
Klober Tile Vent Flat Brown
Each
VR9858AR
Klober Tile Vent Double Pantile Antique Red
Each
VR9858TC
Klober Tile Vent Double Pantile Terracotta
Each
VR9858SG
Klober Tile Vent Double Pantile Slate Grey
Each
VR9858BN
Klober Tile Vent Double Pantile Brown
Each
VR9858BN VR9858BN
VR9857AR
Klober Tile Vent Double Roman Antique Red
Each
VR9857TC
Klober Tile Vent Double Roman Terracotta
Each
VR9857SG
Klober Tile Vent Double Roman Slate Grey
Each
VR9857BN
Klober Tile Vent Double Roman Brown
Each
VR9690TC
VR9690AR
Klober Tile Vent 15x9" Antique Red
Each
• Klober Flat Vent fits: Marley - Modern, Redland - Mini Stonewold,
VR9690TC
Klober Tile Vent 15x9" Terracotta
Each
VR9690SG
Klober Tile Vent 15x9" Slate Grey
Each
VR9690BN
Klober Tile Vent 15x9" Brown
Each
VRA979200
Klober Tile Vent Adaptor Pack
Each
Salisbury 01722 414 011
Russell - Grampian, Sandtoft - Calderdale.
• Klober Double Pantile Vent fits: Marley Mendip, Redland Grovebury, Russell - Pennine, Sandtoft - Double Pantile.
• Klober Double Roman Vent fits: Marley, Redland, Russell, Sandtoft. • Klober 15 x 9” Tile Vent fits: Forticrete V2, Redland 49, Ludlow Plus, Standard Pattern.
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS VENTS & FLY SCREENS • Small slate vent is a ventilation slate to suit 600 x 300mm (24
SLATE VENTS CODE
DESCRIPTION
Unit Qty
VR972200
Small Slate Vent Slate Grey
Each
VRA972400
Small Slate Vent Flexible Adaptor
Each
VR963030
Uni-Line Slate Vent Slate Grey
Each
SOFFIT VENTS CODE
DESCRIPTION
VR972200
x 12”) and 500 x 250mm (20 x 10”) slates, for roof pitch of 20°-70°. • Use the 75/100mm flexible adaptor (VRA972400). Airflow 4500mm2. • Uni line slate vent is an in-line ventilation slate to suit both 600 x 300mm (24 x 12”) and 500 x 250mm (20 x 10”) double-lap slates, for 22.5° and above. Airflow 6500mm2. • Both vents for use in new or re-roofing situations.
VRA972400
Unit Qty
VSCWH
Push-in Soffit Vent White
Each
VSCBK
Push-in Soffit Vent Black
Each
VSCBR
Push-in Soffit Vent Brown
Each
SH070
Hole Saw 70mm Diameter
Each
VSC10WH
Continuous Soffit Vent 10000mm² White 2.4m
Each
VSC10BR
Continuous Soffit Vent 10000mm² Brown 2.4m
Each
VSC10BK
Continuous Soffit Vent 10000mm² Black 2.4m
Each
VSC25WH
Continuous Soffit Vent 25000mm² White 2.4m
Each
VSC25BR
Continuous Soffit Vent 25000mm² Brown 2.4m
Each
VSC25BK
Continuous Soffit Vent 25000mm² Black 2.4m
Each
CODE
DESCRIPTION
Unit Qty
FSM7530
Expanded Metal Fly Screen 75mm x 30m
Each
VSC10WH
FLYSCREENS
FSM61010
Aluminium Fly Screen 610mm x 10m
Each
FSN121M
Flyscreen Black Nylon 1.2 x 1m
Each
FSN1230
Flyscreen Black Nylon 1.2 x 30m
Each
FSM7530
OVER FASCIA VENTS CODE
DESCRIPTION
Unit Qty
VOF10BK
Over Fascia Vent 10000mm² Black 1m
Each
VOF25BK
Over Fascia Vent 25000mm² Black 1m
Each
EAVES VENTS CODE
DESCRIPTION
Unit Qty
VER6
Eaves Vent Roll 6m x300mm
Roll
V31
3-in-1 Vent Pack
Pack
VRC600
Roof Vent Mk 3 Cottage Style Vent 600mm
Each
VRC450
Roof Vent Mk 3 Cottage Style Vent 450mm
Each
VRT4050
Rafter Tray HD 400mm x 50mm
Each
VRT6050
Rafter Tray HD 600mm x 50mm
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
105
ROOFING PRODUCTS CHIMNEY FLUE LINERS
Concrete Chimney Flue Liners We offer a range of sizes to suit most domestic flue requirements. Round liner systems enable offsets to be constructed with the minimum number of bends. The 200mm and 225mm systems are suitable for use with firebacks, standard recess opening sizes of 500mm by 500mm and for stove connection up to 200mm external diameter pipe.
Chimney pot Capping for rendered chimney stack Casings rendered above roof
The larger flue liners enable householders to have larger fireplace openings as set out in the following table:
DM casings can be
Joints sealed with lip glue
info
All variations of chimney sets supplied. Please call the sales office with your requirements Staggered joints between casing
complete with damper
Fiirebrick lining
106
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS CHIMNEY COWLS & BACK FILL
CHIMNEY COWLS CODE
DESCRIPTION
Unit Qty
CCCT
Chimney Cowl Low Profile
Each
CCHT
Chimney Cowl High Top
Each
CCRT
Chimney Cowl Rain Top
Each
CBCB
Bird Guard Cone Top Black
Each
CHIMNEY BACK FILL CODE
DESCRIPTION
Unit Qty
CBF50
Chimney Back Fill 50ltr Bag
Bag
CCHT
CBCB
CBF50
CCCT
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
107
ROOFING PRODUCTS ROOF WINDOWS
4
5
Anot Brilli her Inno ant vatio n! 6
Keylite Roof Windows Performance at no extra cost! The new Keylite roof window range with Futuretherm Technology was designed with a 100% focus on innovation, making installation easier whilst improving the overall user experience. The Integrated Thermal Collar is a unique solution to preventing heat loss and provides yet another installer friendly feature found only in Keylite.
7
2
Futuretherm represents better value than ever, as these and many other features are now included as standard.
3 1
Fit Faster Fit Lower Fit Warmer
NEW
FEATURES
Latest Innovations
108
1
All glazing is now upgraded as standard to warm edge, which adds protection against condensation.
5
Simply pull away the release tape to allow our unique Integrated Thermal Collar to expand, filling the gap between the window frame and the roof.
2
The sash hinge finger spring allows the sash to be installed back into the frame in one smooth effortless motion.
6
Start by simply clicking the top of the hood under the clips. The cover flashings now require 50% less screws than before.
3
Our slimline ventilation handle has a new contemporary style.
7
4
Pre-fitted flick fit brackets are easy to use and make Keylite faster from the box to the roof.
The recessed fit is achieved with standard flashings which together with the new hood design create a low profile.
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS ROOF WINDOWS
Centre Pivot Roof Windows The Centre Pivot (CP) range is the most commonly specified and versatile range of roof windows. The CP Roof Window can be installed in any sloping roof with a pitch 15º - 90º making it a simple and cost effective way of bringing natural light into your roof space. The ventilation flap allows clean fresh air to circulate throughout the room, even when the window is locked and secure.
15º - 90º
Integral Blind Roof Windows
• The Roof Window… with the blind sealed inside the glass! • Blind is permanently sealed within the double glazing unit - a totally dust free environment.
• Requires NO CLEANING - ideal for sterile and/or hygienic environments eg. hospitals / surgeries
• Always appears new as it is protected from damage. • Provides enhanced sun-shading and improves the U-value of the sealed unit.
• Is factory-fitted. • Available for entire window range i.e. Centre Pivot, Top
Hung, Fire Escape/Access, Conservation and White Finish Windows.
• In standard sizes only. • Is manually or electrically operated. • Electric option is operated via a hard wired switch or remote controller.
White Finish Roof Window The White Finish (WF) Roof Window is ideal for kitchens and bathrooms, or any room prone to smoke, dust or steam. This wipe clean polyurethane painted coating has moisture resistant qualities and requires little or no maintenance. The White Finish painted coating is available for the entire roof window range. Please contact the sales team for prices.
Thermal • Toughened glass system. • 4mm Toughened Outer Pane • 20mm Cavity - Argon gas filled • 4mm Toughened Inner Pane
Window sizes
Centre Pivot Thermal Integral Blind Manual Window, Manual Blind
Centre Pivot White Finish
550x780
550x980
660x1180
780x980
780x1180
780x1400
CP01T
CP02T
CP03T
CP04T
CP05T
CP06T
550 x 1180 550 x 1180 550 x 1180
550 x 1180
ICP01T
WFCP01T
550 x 1400
550 x 1180
550 x 1180 660 x 980
550 x 1180550 x 1400
ICP02T 550 x 1400
WFCP02T
Portsmouth 023 92 385 656
550xx1400 1180 660
1400 660 940 x 980 660 x 550 x 1180 550 xx 980 1400 x 980 550 x550 550 x 1400550 x660 980 x 1400660 x 1400 1180
ICP03T
660 x 980
660 x 1400
WFCP03T
660 x 1400 940 x 1180 660 x 980
550 x 1400 550 x 1400 550 x 1400
940660 x660 980 1400 x x980
660 x 980 660 x 980 660 x 980
940 660xx980 1400
x 980 x940 1400 940 x 1180 940660 x 1400
660 x 1400 660 x 1400 660 x 1400
940 x 980 940 x 1180 940 x 980
ICP04T
ICP05T
WFCP04T
WFCP05T
940 x 980
940 x 1180
CP07T
940 x 980 940 x 980 940 x 980
940 x 1180940 x 1400
940 x 1180
940x1600 1140x1180 1340x980 1340x1400
940 x 1180 940 x 1180 940 x 1180
x 1180 940 x940 1400
940 x 1400
CP08T
CP09T
CP10T
940 x 1400 940 x 1400 940 x 1400
940 x 1400
940 x 1400
ICP06T
ICP07T
ICP08T
ICP09T
ICP10T
WFCP06T
WFCP07T
WFCP08T
WFCP09T
WFCP10T
940 x 1400
sales@strukta.co.uk
www.strukta.co.uk
109
ROOFING PRODUCTS ROOF WINDOWS
Top Hung Roof Windows The Top Hung (TH) Roof Window is available for low pitch roofs, where a wide and unobstructed view is desired. Opening outward, the TH Roof Window allows natural daylight and warmth to enter a room without encroaching on valuable floor space.
• Everyday operation of the window is facilitated by rotating the handle at the bottom of the window.
• A gentle push upward opens the window fully to 30 degrees. • This operation is made easy by the powerful pneumatic spring system.
• Although hinged at the top, the TH roof window retains its
ventilation flap and centre-pivoting hinge for cleaning purposes common to all roof windows.
15º - 75º
Fire Escape & Access Roof Windows The Fire Escape (FE) Roof Window opens to 45° in compliance with building regulations and safety standards. The unique design allows operation of this window to be achieved in 2 stages.
• This feature gives any position hold-control from 0º to 15º and with a push beyond 15º the window will gently move to its fully open position of 45º.**
• The pneumatic spring system eliminates the need for extra clumsy mechanical fixings.
• Although hinged at the top for escape purposes, the Fire Escape (FE) Roof Window retains its ventilation flap and centre-pivoting hinge for cleaning purposes common to all roof windows.
15º - 75º
• Thermal • Toughened glass system. • (28mm pane ‘Low E’ Argon Gas filled)
Window sizes 550x980 660x1180 780x980 780x1180 780x1400 940x1600 1140x1180
Top Hung Thermal
Fire Escape & Access
550 x 1180
TH02T
TH03T
–
FE03T
550 x 1180
TH04T
550 x 1180
550 x 1180
550 x 1180550550 550 x 1180 550 x 1400 x 1400 x 1400 x 1180 550
550 x 1400
x 1400 660 x 980 550 660 x 980 550 x 1400
660 x 980
550 x 1400
660 x 980
–
660 660 x 980x 1400 x 1400 660660 x 980
660 x 1400
TH05T
660 x 980
660 x 1400
940 x 980
660 x 1400
FE05T
940 x 980 940 x 980 660 x 1400 660 x 1400
940 x 980
940 x 980
940 x 980 940 x 1180
940 x 980
TH06T 940 x 1180
940 x 1180
FE06T
940 x 1180
940 x 1400 940 x 1180 940 x 1180
940 x 1180
*Check with your local Building Control Department with regards to the position of the window. **FE-07 (940 x 1600) opens to 30°, whilst still satisfying the current building regulations.
110
TH07T
Salisbury 01722 414 011
940 x 1400
940 x 1400
940 x 1400
FE07T 940 x 1400 940 x 1400
TH08T FE08T
940 x 1400
• The window should have an
unobstructed opening area that is at least 0.33m² and at least 450mm high and 450mm wide.
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS ROOF WINDOWS
Installation of the Flashing System is made easy by following our user friendly instructions. The success of any roof window depends on its resistance to penetration of wind and rain.
Window Flashing Kits
• Roof Windows have been subjected to extensive testing at the Centre for Sustainable Technologies at the University of Ulster.
• Prefabricated roof flashings can integrate with virtually any
roofing material overlapping harmoniously to provide a water tight seal around the window.
Tile: TRF
• For roof pitches from 20º - 90º. • Flashing to install single roof window with flat or profiled interlocking tiles should also be used for interlocking plain tile.
• Maximum profile 45mm.
max. 45mm
Slate: SRF
• For roof pitches from 15º - 90º. • Installation of a roof window with slate up to 10mm thick. • Not to be used for interlocking slate. max. 10mm
Deep Tile: DTRF
• For roof pitches from 15º - 90º. • Flashing for installing roof window with flat or profiled interlocking tiles. • Maximum profile 90mm. • Should also be used for interlocking slate and profile sheeting.
max. 90mm
Plain Tile: PTRF
• For roof pitches from 25º - 90º. • Flashings for installing roof window with plain tiles. • Maximum profile 15mm. • Not to be used for interlocking plain tile.
LHS
max. 15mm
RHS
Opening Poles Manually control your window or blackout blind with a telescopic opening pole. The telescopic pole is available in 2m and 3m lengths.
Portsmouth 023 92 385 656
2m
OP2M
3m
OP3M
sales@strukta.co.uk
www.strukta.co.uk
111
ROOFING PRODUCTS ROOF WINDOWS
Combination Flashing Systems
• The range of Combination Flashing Systems allow any of the
standard Roof Windows to be installed in vertical, horizontal or group blocks.
• The standard distance between window frames when installed in any of the combinations is 100mm.
• For variations on this dimension and prices
please contact our
Sales Team.
• Additional Flashing arrangements are also available. Please contact the Sales Team for further information.
Flashing Combinations Side by side - Combi Over & Under - Bi-Lite 2 x 2 Square - Quad-Lite
Window sizes
550x780
550x980
660x1180
780x980
780x1180
780x1400
940x1600
1140x1180
1340x980
1340x1400
Slate (8mm profile)
SRF01
SRF02
SRF03
SRF04
SRF05
SRF06
SRF07
SRF08
SRF09
SRF10
Tile (45mm profile)
TRF01
TRF07
TRF08
TRF09
TRF10
550 x 1180
550 x 1180
550 x 1400
TRF02
550 x 1180
112
x 1180 660 550 x 980
550 x 1400
x 1400 550 x550 1180 660 x 1400
TRF03
660 x 980
TRF04
940 550 x 1180660 550 x 1180 550 x 1400 660550 940 x550 980x 1180 x 1180 x 1400 660 x 980 660 x 550 1400 550 x 1400 x 980 x 1400 550 940 xx 980 1180 550660 x 1400 660xx1400 x980 980
660 x 1400
550 x 1400
660 x 980
940 x 980
660 x 1400
TRF05
940 x 980 940 660660 x 980 660 x 1400 660 x 980 940 xx 980 1400 x 1400940 x 1180 660 x 1400
940 x 980
660940 x 1400 940 x 980 x 1180
940 x 1180
940 x x980 940 x1400 1180 940
940 x 1180
TRF06
940 x 980
x 1400 940940 x 1180
940 x 1180 940 x 1400 940 x 1180
940 x 1400
940 x 1400
940 x 1400
940 x 1400
940 x 1400
Deep Tile 45mm profile)
DTRF01
DTRF02
DTRF03
DTRF04
DTRF05
DTRF06
DTRF07
DTRF08
DTRF09
DTRF10
Plain Tile (15mm profile)
PTRF01
PTRF02
PTRF03
PTRF04
PTRF05
PTRF06
PTRF07
PTRF08
PTRF09
PTRF10
Conservation Slate
CWSRF01
CWSRF02
CWSRF03
CWSRF04
CWSRF05
CWSRF06
CWSRF07
CWSRF08
CWSRF09
CWSRF10
Conservation Tile
CWTRF01
CWTRF02
CWTRF03
CWTRF04
CWTRF05
CWTRF06
CWTRF07
CWTRF08
CWTRF09
CWTRF10
Conservation Plain Tile
CWPTRF01
CWPTRF02
CWPTRF03
CWPTRF04
CWPTRF05
CWPTRF06
CWPTRF07
CWPTRF08
CWPTRF09
CWPTRF10
Combi Slate
CSRF01
CSRF02
CSRF03
CSRF04
CSRF05
CSRF06
CSRF07
CSRF08
CSRF09
CSRF10
Combi Tile
CTRF01
CTRF02
CTRF03
CTRF04
CTRF05
CTRF06
CTRF07
CTRF08
CTRF09
CTRF10
Bi-lite Slate
BLSRF01
BLSRF02
BLSRF03
BLSRF04
BLSRF05
BLSRF06
BLSRF07
BLSRF08
BLSRF09
BLSRF10
Bi-lite Tile
BLTRF01
BLTRF02
BLTRF03
BLTRF04
BLTRF05
BLTRF06
BLTRF07
BLTRF08
BLTRF09
BLTRF10
Quad-lite Slate
QLSRF01
QLSRF02
QLSRF03
QLSRF04
QLSRF05
QLSRF06
QLSRF07
QLSRF08
QLSRF09
QLSRF10
Quad-lite Tile
QLTRF01
QLTRF02
QLTRF03
QLTRF04
QLTRF05
QLTRF06
QLTRF07
QLTRF08
QLTRF09
QLTRF10
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS ROOF WINDOWS
Flat Roof System Roof Windows Many properties have extensions with flat, or near flat roofs. The Flat Roof System (FRS) has been specifically developed for this application, which allows daylight into the area beneath. The Flat Roof System (FRS) provides all the benefits of natural ventilation and daylight. All Roof Windows within the entire range can be integrated within a Flat Roof System.
The standard Flat Roof System consists of the following:
• An insulated timber upstand. • A Centre Pivot Thermal Roof Window. • FRS Flashings to integrate the window onto the timber upstand. • Available with Integral Blind System
0º - 15º
Conservation Roof Windows The Conservation (CW) Roof Window is designed to accommodate the renovation of traditional buildings. The window retains the standard pine frame and sash of the Roof Window range, with a low profile external flashing system.
• With standard lower position in the roof, the window is able to achieve a more streamlined effect.
• The Conservation (CW) Window is available in Centre Pivot (CP), Top Hung (TH), Fire Escape (FE) and White Finish (WF).
• Available with - tile, slate or plain tile flashings available - please specify when placing your order.
• Windows and flashings priced and sold separately.
Centre Pivot Ranges 15º - 90º
Top Hung Ranges 15º - 75º
• Thermal • Toughened glass system. • (28mm pane ‘Low E’ Argon Gas filled)
Window sizes
550x780
550x980
660x1180
780x980
780x1180
780x1400
940x1600
1140x1180
1340x980
Flat Roof System Thermal
FRSCP01
FRSCP02T
FRSCP03T
FRSCP04T
FRSCP05T
FRSCP06T
FRSCP07T
FRSCP08T
FRSCP09T
–
CWCP02T
CWCP03T
–
CWCP06T
–
–
–
Conservation Thermal Centre Pivot Top Hung
–
Fire Escape
–
550 x 1180
–
550 x 1400
660 x 980
550 x550 1180 550 x550 1400 660 x660 980 550 x 1180 550 x 1400 x 980 550 x 1180 550 x 1400 660 x660 660 x 980 550x 1400 x 1180 550 x 1180 550660 x 1400 980x 1400 660 x 980660 550 x 980 550 x 1400 x 1180 x 1400 x 980
550 x 1180
550 x 1180
CWTH02T
CWTH03T
CWFE02T
CWFE03T
550 x 1400
Portsmouth 023 92 385 656
660 x 980
660 x660 1400 660 x 1400 940 x660 980x 1400 660 x 1400 660 x 1400 x 1400
660 x 1400
–
–
660 x 1400
940 x 980
940 x 980
940 x 980x 980 940 x 980 x 980 940940 x 980 x 1180 940940
–
–
940 x 980
940 x 1180
940 x1400 1180 940 xx1180 940 x 1180 940 x 1180 940 x 1180 940 940 x 1180
940 x 1180
CWTH06T CWFE06T
sales@strukta.co.uk
940 x 1400
940 x940 1400 940 x 1400 940 x 1400 940 x 1400 940 x 1400 x 1400
940 x 1400
–
–
–
–
–
–
www.strukta.co.uk
113
ROOFING PRODUCTS ROOF WINDOWS
Flat Roof Apex System Roof Windows The Flat Roof Apex System (FRX) creates an enhanced stream of light into the room below. System supplied complete with roof windows, insulated upstand and precision flashings. Ridge Roof Windows are ideal for both domestic and commercial applications, and are available for the following ranges: Centre Pivot, Top Hung, Conservation and White Finish Roof Windows all with the option of an Integral Blind. Usually installed in out-of-reach locations, these roof windows may be electrically operated by hand-held remote control or a wallmounted switch.
• The installation of Ridge Roof Windows is very similar to standard roof window installation.
• The roof windows must be positioned in a way to avoid opening without the sashes colliding.
• Ridge Windows that are positioned 280mm or greater below the ridge can be fitted using standard flashings. Windows that are positioned less than 280mm will require ridge flashings.
Ridge Windows Roof Windows Ridge (RG) Roof Windows may be installed along the roof ridge to maximise light and space at the highest point of the pitched ceiling.
Choose from the following combinations:
Glazing Options:
• Integral/Electric Integral • White Finish • Pine • Conservation • Electric Operation
• Thermal • Hi Therm • Triple Glazed • Frosted
Electric Operation Roof Windows Where roof windows are installed in out of reach locations they can be opened with ease by using an Electric Operation Kit.
• Electric Operation Kits allow the opening of roof windows via a wall-mounted switch or by remote control.
• They may also be equipped with rain sensors. There are many options available to this system:
• Multiple window operation from one switch; Hand-held remote
control operation; Rain sensor integration; Thermostatic control; Timer control; CO²
• To assist the customer, we can factory-fit the electric motors to the windows at no extra cost.
• For multiple window operation and commercial applications (eg. schools) please contact our Technical Team for your quotation.
• Electric Integral Blind available with all Electric Operation Roof windows.
114
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFING PRODUCTS ROOF DOMES
Em-Dome modular rooflights Em-Domes are quality thermoformed rooflights, designed to make optimum use of natural light. They are offered in a wide range of sizes, shapes and glazing options to meet virtually any specifier and client requirement. High security screwbolts Unique to the Em-Dome are the patented high security screwbolts, supplied factory fitted as standard to all units. Once installed, the fixing cannot be removed using common tools. The screwbolt provides a high level of resistance to tampering or forced entry. The fixing screw or bolt is sleeved within the body of the screwbolt which avoids pressure being exerted on the rooflight glazing as the fixing is tightened. This virtually eliminates the risk of stress fractures caused by over-tightening.
Em-Glaze modular rooflights High quality, aesthetically pleasing prefabricated flat glass rooflights. Em-Glaze Modular units are available in a wide range of standard sizes or can be made to measure and can also be colour coated to match other roof components if required. Em-Glaze Modular rooflights are designed to maximise the amount of natural daylight in a building and at the same time provide a clean minimalistic finish both inside and outside. They are manufactured with flat sealed glass units and incorporate a fully welded aluminium frame and cill detail. All visible aluminium is polyester powder coated light grey as standard. The flush design ensures efficient drainage of rainwater and the silkprint edge ensures that the double glazed unit holds the unrivalled insulation value over the full lifetime without deterioration.
Em-Vault continuous rooflights Em-Vaults are high quality continuous barrel vault rooflights designed to make optimum use of natural light. Em-Vaults are purpose made and are offered in a range of profiles and glazing options to meet virtually any specifier and client requirement. Em-Vaults are high quality continuous rooflights used to span openings up to 6m wide and unlimited length. Units consist of polycarbonate glazing and extruded aluminium cill sections, pre-formed curved glazing bars and capping profiles and are available with solid single, double or triple, or multiwall glazing. Em-Vaults use polycarbonate glazing and may be independently tested and certified according to EN 14963: 2006: 1200 Joules, and ACR(M): 001: 2005 Class B and be deemed Non-Fragile in accordance with (HSE) Health and Safety in Roofworks. Em-Vaults are tested to the highest standards and are proven suitable for use on most flat roofs, including single ply, felt, hot-melt, asphalt, liquid, GRP and lead. Em-Vaults are normally specified to fit to a site formed builder’s curb, although subject to loading calculations, can be supplied with the Em-Curb PVCu range of upstands.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
115
ROOFING PRODUCTS SUNPIPE SYSTEMS
Rigid SunPipe Systems The Monodraught SunPipe is a revolutionary new way to project natural daylight from your roof into your home - brightening rooms, from dawn to dusk, where daylight from windows cannot reach. For a FREE site survey and Full Technical Support call our Sales Team Available in 230, 300, 450 and 530mm diameter, delivery 2-3 days.
How it works... Sunlight is passed down into the desired area by means of silver coated aluminium pipes with a mirrored internal surface. At ceiling level, the diffuser distributes light in every direction, giving an even spread of natural light throughout the room.
Flexible SunPipe Kits All the benefits and quality of the original SunPipe system but even easier to install.
• Spring steel framework holds its rigidity when pulled tight. • Tough outer coating prevents any accidental tearing or damage. • 3m long as standard to suit every application. • British Standard compliant with Fire Test Certification. • Uses Patented Diamond dome and the Super reflective Sunpipe starter tube for superior light performance.
Includes Monodraught’s Patented Diamond dome and a 500mm length of the original rigid SunPipe tube for a higher level of performance.
The BRE (Building Research Establishment) tests have shown the Monodraught 300mm Diamond SunPipe to be the brightest lightpipe on the market.
116
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
117
ROOFLINE & RAINWATER FASCIA BOARD & FLAT BOARD
PR150
Refurbishment Fascia Cover Board 9mm 150mm
Each
PR175
Refurbishment Fascia Cover Board 9mm 175mm
Each
PR200
Refurbishment Fascia Cover Board 9mm 200mm
Each
PR225
Refurbishment Fascia Cover Board 9mm 225mm
Each
PR250
Refurbishment Fascia Cover Board 9mm 250mm
Each
PR300
Refurbishment Fascia Cover Board 9mm 300mm
Each
PR400
Refurbishment Fascia Cover Board 9mm 400mm
Each
PR405
Refurbishment Fascia Cover Board 9mm 405mm DE
Each
h-B As
d-R oo
-W
O
ak
- LO
Li g h t
Each
w
Unit Qty
Refurbishment Fascia Cover Board 9mm 100mm
R os e
DESCRIPTION
PR100
Blac k
CODE
Whit e
REFURBISHMENT FASCIA COVER BOARD 9mm
Note: To specify a colour simply add The colour code to the end of the product code ie: PR100B would be Black Ash finished.
Universal Square Fascia Board 16mm 150mm
Each
PU175
Universal Square Fascia Board 16mm 175mm
Each
PU200
Universal Square Fascia Board 16mm 200mm
Each
PU225
Universal Square Fascia Board 16mm 225mm
Each
PU250
Universal Square Fascia Board 16mm 250mm
Each
PU355
Universal Square Fascia Board 16mm 355mm DE
Each
PU405
Universal Square Fascia Board 16mm 405mm DE
Each
PU455
Universal Square Fascia Board 16mm 455mm DE
Each
PU405B
Square Fascia Box End 16mm 405mm x 1.25m
Each
-W
h-B As
d-R oo
O
ak
- LO
Li g h t
PU150
w
Unit Qty
R os e
DESCRIPTION
Blac k
CODE
Whit e
UNIVERSAL SQUARE FASCIA BOARD 16mm
Note: To specify a colour simply add The colour code to the end of the product code ie: PR100B would be Black Ash finished.
118
Multi-Purpose Flat Board 9mm 100mm
Each
PF150
Multi-Purpose Flat Board 9mm 150mm
Each
PF175
Multi-Purpose Flat Board 9mm 175mm
Each
PF200
Multi-Purpose Flat Board 9mm 200mm
Each
PF225
Multi-Purpose Flat Board 9mm 225mm
Each
PF250
Multi-Purpose Flat Board 9mm 250mm
Each
PF300
Multi-Purpose Flat Board 9mm 300mm
Each
PF405
Multi-Purpose Flat Board 9mm 405mm
Each
PF450
Multi-Purpose Flat Board 9mm 450mm
Each
PF500
Multi-Purpose Flat Board 9mm 500mm
Each
PF605
Multi-Purpose Flat Board 9mm 605mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
h-B As
d-R oo
-W
O
ak
- LO
Li g h t
PF100
w
Unit Qty
R os e
DESCRIPTION
Blac k
CODE
Whit e
MULTI PURPOSE FLAT BOARD 9mm
www.strukta.co.uk
ROOFLINE & RAINWATER VENTED SOFFIT BOARD & TRIMS
SOFFIT BOARD VENTED 9mm
Each
PV175
Soffit Board Vented 9mm 175mm
Each
PV200
Soffit Board Vented 9mm 200mm
Each
PV225
Soffit Board Vented 9mm 225mm
Each
PV250
Soffit Board Vented 9mm 250mm
Each
PV300
Soffit Board Vented 9mm 300mm
Each
PV405
Soffit Board Vented 9mm 405mm
Each
PV450
Soffit Board Vented 9mm 450mm
Each
PV605
Soffit Board Vented 9mm 605mm
Each
-W
Whit e
Soffit Board Vented 9mm 150mm
h-B As
d-R oo
O
ak
- LO
Li g h t
PV150
w
Unit Qty
R os e
DESCRIPTION
Blac k
CODE
Note: To specify a colour simply add The colour code to the end of the product code ie: PR100B would be Black Ash finished.
HOLLOW SOFFIT
PH300
CODE
DESCRIPTION
Unit Qty
PH300
Hollow Soffit 9mm 300mm
Each
PHJ
Hollow Soffit Joint Trim
Each
PHS
Hollow Soffit Starter Trim
Each
PHJ
PHS
FASCIA JOINTS & CORNERS
Each
Fascia Board Joint Trim 500mm (Pk2)
Each
PTFCE300
Fascia Board Corner Trim [Ext] 300mm
Each
PTFCE500
Fascia Board Corner Trim [Ext] 500mm (Pk 2)
Each
PTFCI300
Fascia Board Corner Trim [Int] 300mm
Each
PTFCI500
Fascia Board Corner Trim [Int] 500mm (Pk 2)
Each
PTFF
Roofline Finial
Each
PTFCE300135
Fascia Board Corner Trim 135 Deg. [Ext] 300mm
Each
Used to cover butt joints in fascia. Use double leg joiners with large fascias or making up box ends. Finials are an attractive alternative used at gable end peaks. Always allow a 5mm expansion gap between boards. Fix joiners with polytop pins, super glue or a gap filling adhesive.
PTFJ300 PTFCE300135
PTFF PTFCE300 PTFCI300 -W
h-B As
d-R oo
O
ak
- LO
Li g h t
Fascia Board Joint Trim 300mm
PTFJ500
w
PTFJ300
R os e
Unit Qty
Blac k
DESCRIPTION
Whit e
CODE
Covers the mitred ends of fascia boards. Use double leg corners with large fascias or making up box ends. Always allow a 5mm expansion gap between boards. Fix corners with polytop pins, super glue or a gap filling adhesive.
CLADDING Unit Qty
PCV100
Open V Cladding 100mm White
Each
PCS150
Shiplap 150mm White
Each
PCSJB150
Shiplap 150mm Butt Joint White
Each
d-R oo
O
ak
PCV100
- LO
Li g h t
h-B As
R os e
Blac k
-W
w
DESCRIPTION
Whit e
CODE
Portsmouth 023 92 385 656
PCS150
sales@strukta.co.uk
www.strukta.co.uk
119
ROOFLINE & RAINWATER TRIMS & CORNERS
PTCCM
2 Part Corner Trim (M)
Each
PTCCF
2 Part Corner Trim (F)
Each
PTCCJ
Centre Joint Trim
Each
PTSJ
Soffit Board Joint Trim
Each
PTWC
Windowboard Channel
Each
PTCU
Universal Trim
Each
PTCS
Starter Trim
Each
PTCW
Wall Starter Trim
Each
PTCD
Drip Trim
Each
PTCCF
PTCCJ
w
Unit Qty
-W
d-R oo
R os e
DESCRIPTION
PTCCM
O
ak
- LO
Li g h t
CODE
Whit e
TRIMS
PTCS
PA050
ANGLES Unit Qty
PA050
Angle 50mm
Each
PA080
Hollow Angle 80mm x 100mm
Each
PAF045
Flexi-Angle 45mm
Each
PAF075
Flexi-Angle 75mm
Each
d-R oo
O
ak
PA080
- LO
Li g h t
R os e
Blac k
-W
h-B As
w
DESCRIPTION
Whit e
CODE
TYPICAL CROSS SECTION OF PREFERRED INSTALLATION METHODS Refurbishment using capping board and Multi-purpose Soffit
The Fascia should have a suitable existing or new backboard. The capping board should be fixed so that the weight of the eaves course of tiles is distributed across the backboard and/or tilt fillets. The soffit board should be supported on bearers at the foot of every rafter and be securely supported at each end. A preferred method is to support them by battens nailed or screwed to the rafters as shown in the diagrams. The bearers should be checked for line and level and suitable packing installed where necessary.
120
Salisbury 01722 414 011
New Build using 16mm Board and Multi-purpose Board
When 16mm Fascia is specified the roof covering should be supported by adequate means at the rafter ends. This can be by means of a tilt fillet, lay board or a shaped batten which extends the full length of the roof line. A lay board is particularly desirable in the case of pitches less than 30ยบ as it will prevent any sagging of the Sarking felt. Vented soffit boards are available in a range of sizes when roof ventilation via the soffit is specified. The boards fit into the groove of the 16mm Board and should be fixed to suitable soffit bearers
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER
PA045
Architrave 45mm
Each
PS070
Skirting 70mm
Each
PS095
Skirting 95mm
Each
Blac k
Unit Qty
h-B As
PA045
PS070 d-R oo
O
ak
- LO
Li g h t
DESCRIPTION
w
CODE
-W
R os e
SKIRTING & ARCHITRAVE
Whit e
ARCHITRAVES, QUADRANTS & FASCIA ACCESSORIES
PS095
PD025
QUADRANTS ETC.
Each
Quadrant 17.5mm
Each
PE020
Edge Fillet 20mm
Each
PD025
D Section 25mm
Each
FASCIA ACCESSORIES CODE
DESCRIPTION
Unit Qty
NP3020
30 x 2.00mm Poly Top Nails
250
NP4020
40 x 2.00mm Poly Top Nails
250
NP5033
50 x 3.35mm Poly Top Nails
100
NP6533
65 x 3.35mm Poly Top Nails
100
GUTTER CARRYING CAPACITIES
PE020
-W Blac k
Quadrant 12mm
PQ017
d-R oo
h-B As
O
ak
- LO
Li g h t
PQ012
PQ017
Whit e
Unit Qty
w
DESCRIPTION
R os e
CODE
ROOF AREA (M2) =A + B X LENGTH OF ROOF 2
The Rainwater section starts with PVCu and leads on to Cast Iron Style, Cast Iron, Aluminium and Galvanised Steel. With large stocks on our shelves we can fulfil most requirements within 24 hours. However, should your project need a more original look we can source alternative types to your satisfaction.
OUTLET AT END OF GUTTER RUN
Gutter Fixed Level
Gutter Fixed at 1:350 Fall
OUTLET AT CENTRE OF GUTTER RUN Gutter Fixed Level
Gutter Fixed at 1:350 Fall
Gutter Flow l/s Roof Area m Gutter Flow l/s Roof Area m Gutter Flow l/s Roof Area m Gutter Flow l/s Roof Area m2 2
2
2
/2 Round 0.92 44 1.17 56 1.80 86 2.60 125
1
Square
1.70 81 2.00 96 3.14 163 3.95 189
Deepflow 2.05 98 2.56 123 3.80 183 5.00 240 Ogee
2.40 115 2.90 139 4.50 216 5.30 254
Commercial 4.30 206 6.20 297 8.62 413 12.40 594 Note: A rainwater system is suitable as long as the carrying capacity exceeds the calculated run-off.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
121
ROOFLINE & RAINWATER
RG4
Half Round Gutter 112 x 52mm 4m
Each
L -B
H -W
-BR
G
R
-
Unit Qty
Grey
DESCRIPTION
Brow n
CODE
Blac k
HALF ROUND 112MM GUTTERING
Whit e
PVC 112mm HALF ROUND GUTTER SYSTEM
HALF ROUND 112MM
CODE: RK1 DESC: Half Round Fascia Bracket UNIT: Each
122
HALF ROUND 112MM
HALF ROUND 112MM
HALF ROUND 112MM
CODE: RU1 DESC: Half Round Gutter Union Bracket UNIT: Each
CODE: RE2 DESC: Half Round Internal Gutter Stopend UNIT: Each
CODE: RE1 DESC: Half Round External Gutter Stopend UNIT: Each
HALF ROUND 112MM
HALF ROUND 112MM
HALF ROUND 112MM
CODE: RO1 DESC: Half Round Running Outlet UNIT: Each
CODE: RO2 DESC: Half Round Gutter Stopend Outlet UNIT: Each
CODE: RA1 DESC: Half Round 90째 Gutter Angle UNIT: Each
HALF ROUND 112MM
HALF ROUND 112MM
HALF ROUND 112MM
CODE: RA2 DESC: Half Round 135째 Gutter Angle UNIT: Each
CODE: RA3 DESC: Half Round Adjustable Gutter Angle UNIT: Each
CODE: RDS1 DESC: Square to Round Gutter Adaptor UNIT: Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER
RP25
Round Downpipe 68mm 2.5m
Each
RP4
Round Downpipe 68mm 4m
Each
L -B
H -W
-BR
G
R
-
Unit Qty
Grey
DESCRIPTION
Brow n
CODE
Blac k
68mm ROUND DOWNPIPE
Whit e
68mm ROUND DOWNPIPE SYSTEM
ROUND DOWNPIPE
CODE: RC1 DESC: Round Downpipe Clip UNIT: Each
ROUND DOWNPIPE
ROUND DOWNPIPE
ROUND DOWNPIPE
CODE: RB2 DESC: Round Downpipe 112.5째 Offset Bend UNIT: Each
CODE: RB1 DESC: Round Downpipe 90째 Bend UNIT: Each
CODE: RS1 DESC: Round Downpipe Socket UNIT: Each
ROUND DOWNPIPE
ROUND DOWNPIPE
ROUND DOWNPIPE
CODE: RY1 DESC: Round Downpipe Branch 67.5째 UNIT: Each
CODE: RB3 DESC: Round Downpipe Shoe UNIT: Each
CODE: RX1 DESC: Round Access Pipe UNIT: Each
ROUND DOWNPIPE
ROUND DOWNPIPE
CODE: RDS2 DESC: Square to Round Downpipe Adaptor UNIT: Each
CODE: RHS1 DESC: Square or Round Universal Hopper UNIT: Each
SEE PAGE 192
for Stainless Steel Screws
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
123
ROOFLINE & RAINWATER
RGS4
Square Gutter 114 x 60mm 4m
Each
L -B
H -W
-BR
G
R
-
Unit Qty
Grey
DESCRIPTION
Brow n
CODE
Blac k
114mm SQUARE GUTTERING
Whit e
114mm SQUARE GUTTER SYSTEM
SQUARE 114MM
CODE: RKS1 DESC: Square Fascia Bracket UNIT: Each
124
SQUARE 114MM
SQUARE 114MM
SQUARE 114MM
CODE: RUS1 DESC: Square Gutter Union Bracket UNIT: Each
CODE: RES2 DESC: Square Internal Gutter Stopend UNIT: Each
CODE: RES1 DESC: Square External Gutter Stopend UNIT: Each
SQUARE 114MM
SQUARE 114MM
SQUARE 114MM
CODE: ROS1 DESC: Square Running Outlet UNIT: Each
CODE: ROS2 DESC: Square Gutter Stopend Outlet UNIT: Each
CODE: RAS1 DESC: Square 90째 Gutter Angle UNIT: Each
SQUARE 114MM
SQUARE 114MM
CODE: RAS2 DESC: Square 135째 Gutter Angle UNIT: Each
CODE: RAS3 DESC: Square Adjustable Gutter Angle UNIT: Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER
RPS2.5
Square Downpipe 65mm 2.5m
Each
RPS4
Square Downpipe 65mm 4m
Each
L -B
H -W
-BR
G
R
-
Unit Qty
Grey
DESCRIPTION
Brow n
CODE
Blac k
65mm SQUARE DOWNPIPE
Whit e
68mm SQUARE DOWNPIPE SYSTEM
SQUARE DOWNPIPE
CODE: RCS1 DESC: Square Downpipe Clip UNIT: Each
SQUARE DOWNPIPE
SQUARE DOWNPIPE
SQUARE DOWNPIPE
CODE: RBS2 DESC: Square Downpipe 112.5째 Offset Bend UNIT: Each
CODE: RBS1 DESC: Square Downpipe 90째 Bend UNIT: Each
CODE: RSS1 DESC: Square Downpipe Socket UNIT: Each
SQUARE DOWNPIPE
SQUARE DOWNPIPE
SQUARE DOWNPIPE
CODE: RYS1 DESC: Square Downpipe Branch 67.5째 UNIT: Each
CODE: RBS3 DESC: Square Downpipe Shoe UNIT: Each
CODE: RXS1 DESC: Square Access Pipe UNIT: Each
Fit CAST IRON Style A lightweight and economical alternative to traditional cast iron. Perfectly suited to period properties.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
125
ROOFLINE & RAINWATER 110mm OGEE STYLE GUTTER SYSTEM
OGEE STYLE GUTTERING
RGN4
Ogee Gutter 110 x 80mm 4m
Each
126
-BR
G
R
-
H -W
Grey
L -B
Brow n
Unit Qty
Whit e
DESCRIPTION
Blac k
CODE
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
CODE: RKN1 DESC: Ogee Fascia Bracket UNIT: Each
CODE: RUN1 DESC: Ogee Gutter Union Bracket UNIT: Each
CODE: REN3 DESC: Ogee Internal Gutter Stopend LH UNIT: Each
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
CODE: REN4 DESC: Ogee Internal Gutter Stopend RH UNIT: Each
CODE: REN1 DESC: Ogee External Gutter Stopend LH UNIT: Each
CODE: REN2 DESC: Ogee External Gutter Stopend RH UNIT: Each
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
CODE: RON1 DESC: Ogee Running Outlet UNIT: Each
CODE: RON2 DESC: Ogee Gutter Stopend Outlet LH UNIT: Each
CODE: RON3 DESC: Ogee Gutter Stopend Outlet RH UNIT: Each
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
OGEE STYLE GUTTERING
CODE: RAN2 DESC: Ogee External 90째 Gutter Angle UNIT: Each
CODE: RAN1 DESC: Ogee Internal 90째 Gutter Angle UNIT: Each
CODE: RAN4 DESC: Ogee External 135째 Gutter Angle UNIT: Each
CODE: RAN3 DESC: Ogee Internal 135째 Gutter Angle UNIT: Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER
RGH4
Hi-Cap Gutter 115 x 75mm 4m
Each
L -B
H -W
-BR
G
R
-
Unit Qty
Grey
DESCRIPTION
Brow n
CODE
Blac k
HIGH CAPACITY GUTTERING
Whit e
115mm HIGH CAPACITY GUTTER SYSTEM
HIGH CAPACITY GUTTERING
CODE: RKH1 DESC: Hi-Cap Fascia Bracket UNIT: Each
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
CODE: RUH1 DESC: Hi-Cap Gutter Union Bracket UNIT: Each
CODE: REH2 DESC: Hi-Cap Internal Gutter Stopend UNIT: Each
CODE: REH1 DESC: Hi-Cap External Gutter Stopend UNIT: Each
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
CODE: ROH1 DESC: Hi-Cap Running Outlet UNIT: Each
CODE: RAH1 DESC: Hi-Cap 90째 Gutter Angle UNIT: Each
CODE: RAH2 DESC: Hi-Cap 135째 Gutter Angle UNIT: Each
The sustainable and cost effective answer for rainwater An easy to fit solution that compliments contemporary architecture. All coated products come with a 15 year guarantee.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
127
ROOFLINE & RAINWATER 112mm CAST STYLE HALF ROUND GUTTER SYSTEM
DESCRIPTION
Unit Qty
RG2CI
Cast Style Half Round Gutter 112 x 51mm 2m Black
Each
RG4CI
Cast Style Half Round Gutter 112 x 51mm 4m Black
Each
nree GN
d
Blu
e - OB
S a nd s
G
G
R
-
-BR
Grey
H -W
Whit e
L -B
Brow n
CODE
Ox f o r
Olive
Blac k
112mm CAST STYLE HALF ROUND GUTTERING
ne - SS to
CAST STYLE GUTTERING
CAST STYLE GUTTERING
CAST STYLE GUTTERING
CODE: RK1CI DESC: Cast Style Half Round Fascia Bracket Black UNIT: Each
CODE: RU1CI1 DESC: Cast Style Half Round Gutter Union Bracket Black UNIT: Each
CODE: RA2CI DESC: Cast Style Half Round Internal Gutter Stopend Black UNIT: Each
CAST STYLE GUTTERING
CAST STYLE GUTTERING
CAST STYLE GUTTERING
CODE: RE1CI DESC: Cast Style Half Round External Gutter Stopend Black UNIT: Each
CODE: RO1CI DESC: Cast Style Half Round Running Outlet Black UNIT: Each
CODE: RA1CI DESC: Cast Style Half Round 90째 Gutter Angle Black UNIT: Each
CAST STYLE GUTTERING
CODE: RA2CI DESC: Cast Style Half Round 135째 Gutter Angle Black UNIT: Each
128
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER 116mm CAST STYLE OGEE GUTTER SYSTEM
Cast Style Prostyle Gutter 106 x 70mm x 4m Black Each
G
nree GN
d
Blu
e - OB
G
R
-
RGN4CI
-BR
Grey
Each
Brow n
Cast Style Prostyle Gutter 106 x 70mm x 2m Black
H -W
S a nd s
RGN2CI
L -B
Whit e
Unit Qty
Ox f o r
DESCRIPTION
Olive
CODE
Blac k
112mm CAST STYLE HALF ROUND GUTTERING
ne - SS to
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CODE: RKN1CI DESC: Cast Style Ogee Fascia Bracket Black UNIT: Each
CODE: RUN1CI DESC: Cast Style Ogee Gutter Union Bracket Black UNIT: Each
CODE: REN3CI DESC: Cast Style Ogee Int. Gutter Stopend LH Black UNIT: Each
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CODE: REN4CI DESC: Cast Style Ogee Int. Gutter Stopend RH Black UNIT: Each
CODE: REN1CI DESC: Cast Style Ogee Ext. Gutter Stopend LH Black UNIT: Each
CODE: REN2CI DESC: Cast Style Ogee Ext. Gutter Stopend RH Black UNIT: Each
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CODE: RON1CI DESC: Cast Style Ogee Running Outlet Black UNIT: Each
CODE: RON2CI DESC: Cast Style Ogee Stopend Outlet LH Black UNIT: Each
CODE: RON3CI DESC: Cast Style Ogee Stopend Outlet RH Black UNIT: Each
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CAST STYLE OGEE GUTTERING
CODE: RAN2CI DESC: Cast Style Ogee Ext 90째 Gutter Angle Black UNIT: Each
CODE: RAN1CI DESC: Cast Style Ogee Int 90째 Gutter Angle Black UNIT: Each
CODE: RAN4CI DESC: Cast Style Ogee Ext 135째 Gutter Angle Black UNIT: Each
CODE: REN3CI DESC: Cast Style Ogee Int 135째 Gutter Angle Black UNIT: Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
129
ROOFLINE & RAINWATER CAST STYLE HIGH CAPACITY GUTTERING
G
nree GN
d
Blu
e - OB
-BR
R
-
G
Grey
Each
Brow n
Cast Style Deepstyle Gutter 115 x 75mm 4m Black
H -W
S a nd s
RGH4CI
L -B
Whit e
Unit Qty
Ox f o r
DESCRIPTION
Olive
CODE
Blac k
CAST STYLE HIGH CAPACITY GUTTERING
ne - SS to
HIGH CAPACITY GUTTERING
CODE: RKH1CI DESC: Cast Style Deepstyle Fascia Bracket UNIT: Each
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
CODE: RUH1CI DESC: Cast Style Deepstyle Gutter Union Bracket UNIT: Each
CODE: REH2CI DESC: Cast Style Deepstyle Internal Gutter Stopend UNIT: Each
CODE: REH1CI DESC: Cast Style Deepstyle External Gutter Stopend UNIT: Each
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
HIGH CAPACITY GUTTERING
CODE: RAH1CI DESC: Cast Style Deepstyle 90°Gutter Angle UNIT: Each
CODE: ROH1CI DESC: Cast Style Deepstyle Running Outlet UNIT: Each
CODE: RAH2CI DESC: Cast Style Deepstyle 135° Gutter Angle UNIT: Each
Traditional CAST IRON products, proven to be versatile, durable & reliable A sustainable material that is 100% recyclable. Cast Iron is cost effective owing to it’s longevity and low maintenance.
130
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER 68mm CAST STYLE DOWNPIPE
Cast Style Round Downpipe 68mm 2.5m Black
Each
G
nree GN
d
Blu
e - OB
G
R
-
RP25CI
-BR
Grey
Each
Brow n
Cast Style Round Downpipe 68mm 1.8m Black
H -W
S a nd s
RP18CI
L -B
Whit e
Unit Qty
Ox f o r
DESCRIPTION
Olive
CODE
Blac k
68MM CAST STYLE DOWNPIPE
ne - SS to
68MM CAST STYLE DOWNPIPE
CODE: RC1CI DESC: Cast Style Round Downpipe Clip UNIT: Each
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
CODE: RB2CI DESC: Cast Style Round Downpipe 112.5째 Offset Bend UNIT: Each
CODE: RB275CI DESC: Cast Style Round Downpipe 75mm Offset Bend UNIT: Each
CODE: RB2115CI DESC: Cast Style Round Downpipe 115mm Offset Bend UNIT: Each
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
CODE: RB2150CI DESC: Cast Style Round Downpipe 150mm Offset Bend UNIT: Each
CODE: RB2230CI DESC: Cast Style Round Downpipe 230mm Offset Bend UNIT: Each
CODE: RB2305CI DESC: Cast Style Round Downpipe 305mm Offset Bend UNIT: Each
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
CODE: RB2380CI DESC: Cast Style Round Downpipe 380mm Offset Bend UNIT: Each
CODE: RB2455CI DESC: Cast Style Round Downpipe 455mm Offset Bend UNIT: Each
CODE: RB1CI DESC: Cast Style Round Downpipe 92.5째 Bend UNIT: Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
131
ROOFLINE & RAINWATER
132
nree GN
d
Blu
-BR
R
-
G
Grey
Brow n
e - OB
S a nd s
G
H -W
Whit e
L -B
Ox f o r
Olive
Blac k
HOPPERS & ACCESSORIES
ne - SS to
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
CODE: RB3CI DESC: Cast Style Round Downpipe 135째 Bend UNIT: Each
CODE: RS1LCI DESC: Cast Style Round Downpipe Coupler with Lugs UNIT: Each
CODE: RY1CI DESC: Cast Style Round Downpipe Branch 135째 UNIT: Each
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
68MM CAST STYLE DOWNPIPE
CODE: RB3LCI DESC: Cast Style Round Downpipe Shoe with Lugs UNIT: Each
CODE: RHO1CI DESC: Cast Style Ogee Hopper Medium UNIT: Each
CODE: RHR1CI DESC: ast Style Small Rect. Hopper with Tudor Rose UNIT: Each
GUTTER ACCESSORIES
GUTTER ACCESSORIES
GUTTER ACCESSORIES
CODE: RBRS DESC: Side Rafter Bracket
CODE: RBRT DESC: Top Rafter Bracket
CODE: RBRF DESC: Rise & Fall Bracket Universal
UNIT: Each
UNIT: Each
GUTTER ACCESSORIES
GUTTER ACCESSORIES
GUTTER ACCESSORIES
CODE: ADUR DESC: Universal Rainwater Adaptor Sq/Rnd Rubber UNIT: Each
CODE: ROG065 DESC: Balloon Outlet Guard
CODE: RGGB DESC: Gutter Guard Leaf Catching Grate Black UNIT: 5m Pk
UNIT: Each
Salisbury 01722 414 011
Please state Half Round, Square or Deep Flow
UNIT: Each
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER
Large stocks in store... FREE next day delivery Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
133
ROOFLINE & RAINWATER 110mm SOIL PIPE SYSTEM
110MM SOIL PIPE SOCKET
CODE: PSS1103BS DESC: Soil Pipe Single Socket 110mm Black UNIT: Each
134
PIPE CLIP
DOUBLE SOCKET COUPLER
SINGLE SOCKET COUPLER
CODE: CP110BS DESC: Pipe Clip Black UNIT: Each
CODE: CDS110BS DESC: Coupler Double Socket Black UNIT: Each
CODE: CSS110BS DESC: Coupler Single Socket Black UNIT: Each
92.5° DOUBLE SOCKET BEND
92.5° SINGLE SOCKET BEND
112° SINGLE SOCKET BEND
CODE: BDS11090BS DESC: 92.5° Double Socket Bend Black UNIT: Each
CODE: BSS11090BS DESC: 92.5° Single Socket Bend Black UNIT: Each
CODE: BSS110112BS DESC: 112° Single Socket Bend Black UNIT: Each
135° SINGLE SOCKET BEND
DOUBLE SOCKET ADJ BEND
92.5° SINGLE SOCKET ACCESS
CODE: BSS110135BS DESC: 135° Single Socket Bend Black UNIT: Each
CODE: BDSA110BS DESC: Double Socket Adjustable Bend Black UNIT: Each
CODE: PASS11090BS DESC: 92.5° Single Socket Access Pipe Black UNIT: Each
135° (45°) OFFSET BEND TOP
135° (45°) OFFSET BEND BOTTOM
92.5° BRANCH WITH BOSS
CODE: BSSO135TBS DESC: 135° (45°) Offset Bend Top Black UNIT: Each
CODE: BSSO135BBS DESC: 135° (45°) Offset Bend Bottom Black UNIT: Each
CODE: TDB11090BS DESC: 92.5° Branch With Boss Black UNIT: Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
ROOFLINE & RAINWATER 110mm SOIL PIPE SYSTEM
92.5째 DOUBLE BRANCH
ACCESS PIPE DOUBLE SOCKET
ACCESS PIPE SINGLE SOCKET
CODE: XT11090BS DESC: 92.5째 Double Branch Triple Socket Black UNIT: Each
CODE: PADS110BS DESC: Access Pipe Double Socket Black UNIT: Each
CODE: PASS110BS DESC: Access Pipe Single Socket Grey Black UNIT: Each
TRIPLE BOSS PIPE
SHORT BOSS PIPE
STRAP ON BOSS
CODE: PBT110BS DESC: Triple Boss Pipe Black UNIT: Each
CODE: PBS110BS DESC: Short Boss Pipe Black UNIT: Each
CODE: BS110BS DESC: Strap On Boss Black UNIT: Each
WASTE INLET MANIFOLD
WASTE ADAPTOR 32MM
WASTE ADAPTOR 40MM
CODE: MWI110BS DESC: Waste Inlet Manifold Black UNIT: Each
CODE: AWR32GS DESC: Rubber Waste Adaptor 32mm UNIT: Each
CODE: AWR40GS DESC: Rubber Waste Adaptor 40mm UNIT: Each
WASTE ADAPTOR 50MM
SOLVENT ADAPTOR 32MM
SOLVENT ADAPTOR 40MM
CODE: AWR50GS DESC: Rubber Waste Adaptor 50mm UNIT: Each
CODE: ABS32BS DESC: Solvent Boss Adaptor 32mm UNIT: Each
CODE: ABS40BS DESC: Solvent Boss Adaptor 40mm UNIT: Each
SOLVENT ADAPTOR 50MM
AIR ADMITTANCE VALVE
AIR ADMITTANCE VALVE EXT
CODE: ABS50BS DESC: Solvent Boss Adaptor 50mm UNIT: Each
CODE: VAAP110BS DESC: Air Admittance Valve Push Fit Black UNIT: Each
CODE: VAAE110BS DESC: Air Admittance Valve External Black UNIT: Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
135
ROOFLINE & RAINWATER ABOVE GROUND SOIL PIPE & FITTINGS
136
SCREW ACCESS PLUG
250ML SOLVENT CEMENT
VENT COWL
CODE: PSA110BS DESC: Screwed Access Plug Black UNIT: Each
CODE: CS250 DESC: Solvent Cement 250ml UNIT: Each
CODE: CV110BS DESC: Vent Cowl Black UNIT: Each
EXTRACT COWL
WEATHERING COLLAR
INTUMESCENT PIPE WRAP 110MM
CODE: CE110BS DESC: Extract Cowl Black UNIT: Each
CODE: CW110BS DESC: Weathering Collar Black UNIT: Each
CODE: PWI110 DESC: Intumescent Pipe Wrap 110mm UNIT: Each
INTUMESCENT PIPE WRAP 160MM
FIRE PROTECTION COLLAR 55MM
FIRE PROTECTION COLLAR 110MM
CODE: PWI160 DESC: Intumescent Pipe Wrap 160mm UNIT: Each
CODE: PWC55 DESC: Fire Protection Collar 55mm UNIT: Each
CODE: PWC110 DESC: Fire Protection Collar 110mm UNIT: Each
FIRE PROTECTION COLLAR 160MM
LOW MODULUS PVCu SEALANT
ROOF & GUTTER SEALANT
CODE: PWC160 DESC: Fire Protection Collar 160mm UNIT: Each
CODE: SLM310CL DESC: Low Modulus PVCu Sealant 310ml Clear UNIT: Tube
CODE: SRG310 DESC: Roof & Gutter Sealant 310ml UNIT: Tube
SILICONE SPRAY
ACTI-FAST
SUPER GLUE
CODE: LSS DESC: Silicone Spray UNIT: Each
CODE: ASP200 DESC: SuperGlue Activator Spray PVCu 200ml UNIT: Each
CODE: GS20 DESC: SuperGlue 20g UNIT: Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
PLASTERING
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
137
PLASTERING ANGLE BEAD & STOP BEAD
STANDARD ANGLE BEAD 45mm WING
45mm
CODE
DESCRIPTION
Unit Qty
BAG24
Standard Angle Bead Galv. 2.4m
Length
BAG30
Standard Angle Bead Galv. 3m
Length
WIDE WING ANGLE BEAD 53mm WING CODE
DESCRIPTION
Unit Qty
BAGW24
Wide Wing Angle Bead Galv. 2.4m
Length
BAGWW30
Wide Wing Angle Bead Galv. 3m
Length
BASW30
Wide Wing Angle Bead St/St 3m
Length
BAG24
• Standard angle bead provides a true corner which protects and reinforces plaster where it is most vulnerable.
• Stainless steel beads are designed to be used externally with cement based renders.
DRYWALL ANGLE BEAD HOOK CODE
DESCRIPTION
Unit Qty
BGWHOG24
Drywall Angle Bead Galv. Hook On 2.4m
Length
NEW
• the pre-Toothed thin coat angle bead that needs no nails or
screws. Simply tap it to the corner of the wall and get plastering!
DRYWALL ANGLE BEAD CODE
DESCRIPTION
Unit Qty
BDWG24
Drywall Angle Bead Galv. Perforated 2.4m
Length
BDWG30
Drywall Angle Bead Galv. Perforated 3m
Length
22mm
• Galvanised angle bead, designed to be used internally on plasterboard corners.
• Suitable for 3mm plaster. BDWG24
BSG1024
PLASTER STOP BEAD CODE
138
DESCRIPTION
Unit Qty
BSG1024
Plaster Stop Bead Galv. 10mm 2.4m
Length
BSG1030
Plaster Stop Bead Galv. 10mm 3m
Length
BSG1324
Plaster Stop Bead Galv. 13mm 2.4m
Length
BSG1330
Plaster Stop Bead Galv. 13mm 3m
Length
BSG1630
Plaster Stop Bead Galv. 16mm 3m
Length
BSG1930
Plaster Stop Bead Galv. 19mm 3m
Length
BSS1030
Plaster Stop Bead St/St 10mm 3m
Length
BSS1330
Plaster Stop Bead St/St 13mm 3m
Length
BSS1630
Plaster Stop Bead St/St 16mm 3m
Length
BSS1930
Plaster Stop Bead St/St 20mm 3m
Length
Salisbury 01722 414 011
10mm
• Plaster stop beads are used with 2 - 3 coat renders. • Galvanised beads are used internally and stainless steel externally. • Stop beads finish & reinforce the render edges.
sales@strukta.co.uk
www.strukta.co.uk
PLASTERING STOP BEAD, FEATURE BEAD & RENDER BEADS
RENDER STOP BEAD CODE
DESCRIPTION
Unit Qty
BBPG30
Render Stop Bead Galv. 3m (Bellcast)
Length
BBPS30
Render Stop Bead St/St 3m (Bellcast)
Length
• Commonly known as bell bead, bell cast render stop bead provides the bell shape required at the bottom edge of an externally rendered wall.
• Available in galvanised and stainless steel in 3m lengths.
BBPG30 25mm
DRYWALL STOP BEAD CODE
DESCRIPTION
Unit Qty
BDSG324
Drywall Stop Bead Galv. 3mm 2.4m
Length
BDSG330
Drywall Stop Bead Galv. 3mm 3m
Length
3mm
• Drywall stop bead finishes and protects edges of thin coat plaster used around door reveals, abutments and windows.
BDSG324
ARCHITRAVE & FEATURE BEAD CODE
DESCRIPTION
Unit Qty
BFEG1030
Feature Bead Engaging Galv. 10mm 3m
Length
BFEG1330
Feature Bead Engaging Galv. 13mm 3m
Length
BFAG1030
Feature Bead Abutting Galv. 10mm 3m
Length
BFAG1330
Feature Bead Abutting Galv. 13mm 3m
Length
BFEG1030
15mm
• Feature beads provide neat shadow lines and recesses around door frames and abutments.
• Engaging feature beads connect into the frame leaving a small gap around the edge.
• Abutting feature beads butt up to the frame,
leaving a regular measured gap around the edge.
PLASTERBOARD EDGING BEAD CODE
DESCRIPTION
Unit Qty
BEG9530
Plasterboard Edging Bead Galv. 9.5mm
Length
BEG12530
Plasterboard Edging Bead Galv. 12.5mm
Length
BEG1530
Plasterboard Edging Bead Galv. 15mm
Length
BEG12530
• A reversible, dual purpose bead which
reinforces plasterboard edges by enclosing them in a protective steel section.
• Provides clean edges at openings and
12.5mm
abutments – galvanised for internal work.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
139
PLASTERING MOVEMENT BEAD, STOP BEAD & DRYWALL BEAD
PVCu ANGLE BEAD RENDER & PLASTER CODE
DESCRIPTION
Unit Qty
BAP1030WH
PVCu Angle Bead White 10mm 3m
Length
BAP1530WH
PVCu Angle Bead White 15mm 3m
Length
BAP2030WH
PVCu Angle Bead White 20mm 3m
Length
BAP1030IV
PVCu Angle Bead Ivory 10mm 3m
Length
BAP1530IV
PVCu Angle Bead Ivory 15mm 3m
Length
BAP2030IV
PVCu Angle Bead Ivory 20mm 3m
Length
• Plastic angle beads provide all the benefits of metal beads, with the advantage of being flexible, lightweight & easy to use.
• Provides a true corner which protects and reinforces plaster where it is most vulnerable.
PVCu MOVEMENT BEAD CODE
DESCRIPTION
Unit Qty
BMP1030WH
PVCu Movement Bead White 10mm 3m
Length
BMP1530WH
PVCu Movement Bead White 15mm 3m
Length
BMP1030IV
PVCu Movement Bead Ivory 10mm 3m
Length
BMP15305IV
PVCu Movement Bead Ivory 15mm 3m
Length
• Used on external renders where minor movement is expected. • Also can be used when changes of colour in the render are required.
PVCu STOP BEAD CODE
DESCRIPTION
Unit Qty
BSP1030WH
PVCu Stop Bead White 10mm 3m
Length
BSP1530WH
PVCu Stop Bead White 15mm 3m
Length
BSP2030WH
PVCu Stop Bead White 20mm 3m
Length
BSP1030IV
PVCu Stop Bead Ivory 10mm 3m
Length
BSP1530IV
PVCu Stop Bead Ivory 15mm 3m
Length
BSP2030IV
PVCu Stop Bead Ivory 20mm 3m
Length
• Plastic stop beads protect and finish the edge of plaster.
PVCu DRYWALL BEAD CODE
DESCRIPTION
Unit Qty
BDWPRWH
PVCu Drywall Bead White 2mm Rigid 3m
Length
BDWPAWH
PVCu Drywall Bead White 2mm Arch 3m
Length
• Plastic rigid angle bead, designed to be used internally on plasterboard corners.
• Plastic flexible angle bead, designed to be used internally to create curved and arched forms.
• Both suitable for 3mm plaster.
PVCu BELLCAST BEAD CODE
DESCRIPTION
Unit Qty
BPP1030WH
Bellcast Bead White 10mm 3m
Length
BPP1530WH
Bellcast Bead White 15mm 3m
Length
BPP2030WH
Bellcast Bead White 20mm 3m
Length
BPP1030IV
Bellcast Bead Ivory 10mm 3m
Length
BPP1530IV
Bellcast Bead Ivory 15mm 3m
Length
BPP2030IV
Bellcast Bead Ivory 20mm 3m
Length
• For forming a Bellcast edge to render.
140
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
PLASTERING MESH & METAL LATH FIXINGS
EXPANDED LATH & RIBLATH CODE
DESCRIPTION
Unit Qty
MEMG
Expanded Metal Lath Galv. 2500 x 700mm
Sheet
MEMS
Expanded Metal Lath St/St 2500 x 700mm
Sheet
MRG
Riblath Galv. 2500 x 600mm
Sheet
MRS
Riblath St/St 2500 x 600mm
Sheet
• Expanded metal lathing is used for general plaster
reinforcement. Available in stainless steel and galvanised.
• EML provides a key for lightweight plasters over openings and on walls.
• Riblath provides a carrier for sand/cement plasters on solid backgrounds, such as blockwork.
FIXING INFO FOR METAL LATH TO SOLID BACKGROUND 200mm Max
350mm Max
150mm Max
2500mm
GALV & STAINLESS STEEL MESH CODE
DESCRIPTION
Unit Qty
MEM64G
Mesh Galv. 64mm x 20m
Roll
MEM114G
Mesh Galv. 114mm x 20m
Roll
MEM178G
Mesh Galv. 178mm x 20m
Roll
MEM229G
Mesh Galv. 229mm x 20m
Roll
MEM305G
Mesh Galv. 305mm x 20m
Roll
MEM64S
Mesh St/St 64mm x 20m
Roll
MEM114S
Mesh St/St 114mm x 20m
Roll
MEM178S
Mesh St/St 178mm x 20m
Roll
MEM229S
Mesh St/St 229mm x 20m
Roll
MEM305S
Mesh St/St 305mm x 20m
Roll
METAL LATH FIXINGS CODE
DESCRIPTION
Unit Qty
FN40
Insulation Fixings 10 x 70mm (40mm Capacity)
200
FN60
Insulation Fixings 10 x 100mm (60mm Capacity)
200
FN80
Insulation Fixings 10 x 120mm (80mm Capacity)
200
WR525S
St/St M5 Penny Washer
100
NED3026
Drywall Nails EZP 30 x 2.65mm
25Kg
NED4026
Drywall Nails EZP 40 x 2.65mm
25Kg
NED5026
Drywall Nails EZP 50 x 2.65mm
25Kg
NED6026
Drywall Nails EZP 60 x 2.65mm
25Kg
FN60
• Universal nylon fixing is suitable for fixing render lath back
to solid wall surfaces. Rough cast head provides excellent key for render, and the large diameter head provides excellent pull out resistance. Available in longer sizes up to 150mm.
• Stainless steel washer can be used with stainless steel screws to fix stainless steel lath to timber.
NED4026 WR525S
• Electro zinc plated ring shank nail for fixing plasterboard.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
141
PLASTERING DRYWALL SCREWS
FINE THREAD LOOSE DRYWALL SCREWS CODE
DESCRIPTION
Unit Qty
SDFL25
Drywall Screws Fine Thread Loose 25mm
1000
SDFL32
Drywall Screws Fine Thread Loose 32mm
1000
SDFL38
Drywall Screws Fine Thread Loose 38mm
1000
SDFL42
Drywall Screws Fine Thread Loose 42mm
1000
SDFL50
Drywall Screws Fine Thread Loose 50mm
1000
SDFL65
Drywall Screws Fine Thread Loose 65mm
1000
SDFL75
Drywall Screws Fine Thread Loose 75mm
1000
SDFL100
Drywall Screws Fine Thread Loose 100mm
1000
SDFL125
Drywall Screws Fine Thread Loose 125mm
1000
SDFL38
• Fine thread drywall screws are designed to pierce and drill into 0.9mm of metal channel.
COARSE THREAD LOOSE DRYWALL SCREWS CODE
DESCRIPTION
Unit Qty
SDCL25
Drywall Screws Coarse Thread Loose 25mm
1000
SDCL32
Drywall Screws Coarse Thread Loose 32mm
1000
SDCL38
Drywall Screws Coarse Thread Loose 38mm
1000
SDCL42
Drywall Screws Coarse Thread Loose 42mm
1000
SDCL50
Drywall Screws Coarse Thread Loose 50mm
1000
SDCL65
Drywall Screws Coarse Thread Loose 65mm
1000
SDCL75
Drywall Screws Coarse Thread Loose 75mm
1000
SDCL10
Drywall Screws Coarse Thread Loose 100mm
1000 SDCL38
• Coarse thread drywall screws wind into timber very fast giving a quick secure fixing for plasterboard into timber studs. Range from 25 – 75mm.
DRILL POINT DRYWALL SCREWS CODE
DESCRIPTION
Unit Qty
SDDL25
Drywall Drill Screw Loose 25mm
1000
SDDL32
Drywall Drill Screw Loose 32mm
1000
SDDL38
Drywall Drill Screw Loose 38mm
1000
SDDL42
Drywall Drill Screw Loose 42mm
1000
SDDL50
Drywall Drill Screw Loose 50mm
1000
SDDL65
Drywall Drill Screw Loose 65mm
1000
SDDL75
Drywall Drill Screw Loose 75mm
1000
SDDL38
PANHEAD SCREWS
142
CODE
DESCRIPTION
Unit Qty
SW13D
Panhead Drillpoint Screw 13mm
1000
SW13S
Panhead Sharpoint Screw 13mm
1000
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
PLASTERING COLLATED SCREWS & MESH • Collated screws are designed to be
FINE THREAD COLLATED DRYWALL SCREWS CODE
DESCRIPTION
Unit Qty
SDFC25
Drywall Screws Fine Thread Collated 25mm
1000
SDFC35
Drywall Screws Fine Thread Collated 35mm
1000
SDFC42
Drywall Screws Fine Thread Collated 42mm
1000
SDFC50
Drywall Screws Fine Thread Collated 50mm
1000
compatible with all leading branded collated screw guns.
COARSE THREAD COLLATED DRYWALL SCREWS CODE
DESCRIPTION
Unit Qty
SDCC25
Drywall Screws Coarse Thread Collated 25mm
1000
SDCC35
Drywall Screws Coarse Thread Collated 35mm
1000
SDCC38
Drywall Screws Coarse Thread Collated 38mm
1000
SDCC45
Drywall Screws Coarse Thread Collated 45mm
1000
SDCC50
Drywall Screws Coarse Thread Collated 50mm
1000
SDCC55
Drywall Screws Coarse Thread Collated 55mm
1000
SDCC75
Drywall Screws Coarse Thread Collated 75mm
1000
COLLATED SCREW GUN CODE
DESCRIPTION
Unit Qty
GCSB14V
Senco Collated Screw Gun 14v
Each
GCSB18V
Senco Collated Screw Gun 18v
Each
GCSM240V
Senco Collated Screw Gun 240v
Each
SDBPH13
Drive Bit for 14.4v Senco 130mm PH2
Each
SDBPH18
Drive Bit for 18v Senco 160mm PH2
Each
SDBSQ16
Drive Bit for 18v Senco 160mm Square
Each
GCSB18V
FIBRE MESH & ACCESSORIES CODE
DESCRIPTION
Unit Qty
TSSA50
Fibre Tape 50mm x 90m
Roll
TSSA100
Fibre Tape 100mm x 45m
Roll
MFG150
Fibremesh 1m x 50m
Roll
MWG0950
Screed Reinforcing 1.2 x 50m Wire Mesh
Roll
FC10
Gyproc Easifill Compound - 10Kg
Bag
TSSA100
TSSA50
• Fibre scrim is a high tack self-adhesive, fibreglass reinforced plasterers tape. For joint finishing, crack and hole repairs. Eliminates the need for pre plastering. Flexible to prevent bubbling. Available in 50 & 100mm wide rolls.
• Fibremesh reinforcing mesh is ideal for reinforcing plaster & render. Light, economical and easy to use. Very strong glass fibre.
MFG150
MWG0950
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
143
PLASTERING ARCH FORMERS
PLASTER ARCH FORMERS CODE
DESCRIPTION
Unit Qty
AFPSC0750
Warwick Semi Circle Arch Former 750 x 375mm
Each
AFPSC0800
Warwick Semi Circle Arch Former 800 x 400mm
Each
AFPSC0850
Warwick Semi Circle Arch Former 850 x 438mm
Each
AFPSC0900
Warwick Semi Circle Arch Former 900 x 450mm
Each
AFPSC1000
Warwick Semi Circle Arch Former 1000 x 500mm
Each
AFPSC1200
Warwick Semi Circle Arch Former 1200 x 600mm
Each
AFPSC1500
Warwick Semi Circle Arch Former 1500 x 750mm
Each
• A high quality cost effective solution to creating internal
arches in masonry walls. Suits a wall thickness of 90 - 150mm.
PLASTER ARCH FORMERS
144
CODE
DESCRIPTION
Unit Qty
AFPCO1050
Classic Oval Arch Former 1050 x 265mm
Each
AFPCO1200
Classic Oval Arch Former 1200 x 280mm
Each
AFPCO1500
Classic Oval Arch Former 1500 x 330mm
Each
AFPCO1800
Classic Oval Arch Former 1800 x 375mm
Each
AFPCO2100
Classic Oval Arch Former 2100 x 375mm
Each
AFPCO2400
Classic Oval Arch Former 2400 x 375mm
Each
AFPC03000
Classic Oval Arch Former 3000 x 375mm
Each
AFBP
Bridging Piece
Each
AFEP
Extension Piece
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
145
CONTRACTORS EQUIPMENT GLOVES & EYEWEAR
STANDARD RIGGER GLOVE
BUILDERS GLOVES
CODE
DESCRIPTION
Unit Qty
SGRS
Rigger Gloves Standard
Pair
PU GREY GLOVES
CODE
THERMAL GLOVE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SGBL
Builders Gloves Large
SGBXL
Builders Gloves X-Large
Pair
SGBTL
Thermal Builders Gloves Large
Pair
Pair
SGBTXL
Thermal Builders Gloves X-Large
Pair
GRIPPER GLOVES
LATEX GLOVES
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SGPUGL
PU Grey Gloves Large
Pair
SGG
Gripper Gloves
Pair
SGL
Latex Gloves
Pair
SGPUGXL
PU Grey Gloves X-Large
Pair
SGPUGXXL
PU Grey Gloves XX-Large
Pair
KNITWRIST GLOVES
ANTI-MIST GOGGLES
PVC GLOVES
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SGPVC
PVC Gloves
Pair
SGPVCKL
PVC Knit Wrist Gloves Large
Pair
SAFETY GOGGLES
146
CODE
DESCRIPTION
Unit Qty
SGAM
Safety Goggles with Anti-Mist Coating
Pair
WRAP AROUND SAFETY GLASSES
WRAP AROUND SAFETY GLASSES
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SG
Safety Goggles
Pair
SCS
Wrap Around Safety Glasses
Pair
SCSBM
As SCS with Blue Mirror Lens
Pair
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT RESPIRATORS & HEARING PROTECTION
FOAM EAR PLUGS
FOAM EAR PLUGS - PAIR
EAR DEFENDERS
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SPEP
Foam Ear Plugs (Pair)
10x
SEPH
Foam Ear Plugs on Headband
Pair
SED
Ear Defenders
Pair
NUISANCE MASK
VENTED DUST MASK
VENTED DUST MASK
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
SNM
Nuisance Mask
50
FFP2
Vented Dust Mask
Each
FFP3
Vented Dust Mask
Each
PROFILE DUST MASK
A2 GAS FILTER
P3 PARTICLE FILTER
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
MFS
Scott Profile Face Mask
Each
MFGA2
A2 Gas Filter
Pair
MFGP3
P3 Particle Filter
Pair
SHSR
SAFETY HELMETS CODE
DESCRIPTION
Unit Qty
SHSB
Standard Safety Helmet Blue
Each
SHSG
Standard Safety Helmet Green
Each
SHSR
Standard Safety Helmet Red
Each
SHSW
Standard Safety Helmet White
Each
SHSY
Standard Safety Helmet Yellow
Each
SHCW
Comfort Safety Helmet White
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
SHCW
www.strukta.co.uk
147
CONTRACTORS EQUIPMENT SAFETY FOOTWEAR
SAFETY FOOTWEAR CODE
DESCRIPTION
Unit Qty
SRB7
Rigger Boot Size 7
Pair
SRB8
Rigger Boot Size 8
Pair
SRB9
Rigger Boot Size 9
Pair
SRB10
Rigger Boot Size 10
Pair
SRB11
Rigger Boot Size 11
Pair
SRB12
Rigger Boot Size 12
Pair
SBBL7
Safety Boot Black Size 7
Pair
SBBL8
Safety Boot Black Size 8
Pair
SBBL9
Safety Boot Black Size 9
Pair
SBBL10
Safety Boot Black Size 10
Pair
SBBL11
Safety Boot Black Size 11
Pair
SBBL12
Safety Boot Black Size 12
Pair
SBBR7
Safety Boot Brown Size 7
Pair
SBBR8
Safety Boot Brown Size 8
Pair
SBBR9
Safety Boot Brown Size 9
Pair
SBBR10
Safety Boot Brown Size 10
Pair
SBBR11
Safety Boot Brown Size 11
Pair
SBBR12
Safety Boot Brown Size 12
Pair
SRB10 SBBL10
STBL10 SBBR10
STBL7
Safety Trainer Black Size 7
Pair
STBL8
Safety Trainer Black Size 8
Pair
STBL9
Safety Trainer Black Size 9
Pair
STBL10
Safety Trainer Black Size 10
Pair
STBL11
Safety Trainer Black Size 11
Pair
STBL12
Safety Trainer Black Size 12
Pair STBR10
STBR7
148
Safety Trainer Brown Size 7
Pair
STBR8
Safety Trainer Brown Size 8
Pair
STBR9
Safety Trainer Brown Size 9
Pair
STBR10
Safety Trainer Brown Size 10
Pair
STBR11
Safety Trainer Brown Size 11
Pair
STBR12
Safety Trainer Brown Size 12
Pair
SW7
Safety Wellington Size 7
Pair
SW8
Safety Wellington Size 8
Pair
SW9
Safety Wellington Size 9
Pair
SW10
Safety Wellington Size 10
Pair
SW11
Safety Wellington Size 11
Pair
SW12
Safety Wellington Size 12
Pair
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT HI-VIS CLOTHING & WORKWEAR
Hi-VIS CLOTHING CODE
DESCRIPTION
Unit Qty
SHVWCM
Hi Vis Waistcoat Medium
Each
SHVWCL
Hi Vis Waistcoat Large
Each
SHVWCXL
Hi Vis Waistcoat X-Large
Each
SHVWCXXL
Hi Vis Waistcoat XX-Large
Each
SHVBJM
Hi Vis Bomber Jacket-Medium
Each
SHVBJL
Hi Vis Bomber Jacket-Large
Each
SHVBJXL
Hi Vis Bomber Jacket-X-Large
Each
SHVBJXXL
Hi Vis Bomber Jacket-XX-Large
Each
SHVJM
Hi Vis Jacket Medium
Each
SHVJL
Hi Vis Jacket Large
Each
SHVJXL
Hi Vis Jacket X-large
Each
SHVJXXL
Hi Vis Jacket XX-large
Each
SHVTM
Hi Vis Trousers Medium
Pair
SHVTL
Hi Vis Trousers Large
Pair
SHVTXL
Hi Vis Trousers X-Large
Pair
POSUD
Disposable Oversuit
Each
POSHD
Disposable Overshoes
Bx 100
SHVWCM
SHVJCXL
SHVTL
WORKWEAR CODE
DESCRIPTION
SHVBJL
Unit Qty
WTLL
Thermal Leggings Large
Pair
WTLXL
Thermal Leggings X-Large
Pair
WTTL
Thermal T-Shirt Large
Each
WTTXL
Thermal T-Shirt X-Large
Each
WTR30
Work Trousers 30” R
Pair
WTR32
Work Trousers 32” R
Pair
WTR34
Work Trousers 34” R
Pair
WTR36
Work Trousers 36” R
Pair
WTR38
Work Trousers 38” R
Pair
WTR40
Work Trousers 40” R
Pair POSUD
WTTL
WTLL
WTR34
Portsmouth 023 92 385 656
POSHD
sales@strukta.co.uk
www.strukta.co.uk
149
CONTRACTORS EQUIPMENT LINE MARKERS & BARRIERS
SURVEY LINE CODE
DESCRIPTION
Unit Qty
CPSY
Marker Spray Paint Yellow
Each
CPSW
Marker Spray Paint White
Each
CPSG
Marker Spray Paint Green
Each
CPSBK
Marker Spray Paint Black
Each
CPSO
Marker Spray Paint Orange
Each
CPSG
Marker Spray Paint Green
Each
CPSR
Marker Spray Paint Red
Each
CPSB
Marker Spray Paint Blue
Each
CPSAH
Applicator Hand Held
Each
BARRIER TAPES/FENCE & THERMOMETERS CODE
DESCRIPTION
Unit Qty
CHA
Air Horn
Each
CTMM
Max / Min Thermometer
Each
SFB150O
Barrier Fencing 1 x 50m - Orange
Roll
SFB150B
Barrier Fencing 1 x 50m - Blue
Roll
SPRS
Steel Road Pin
Each
TBRW
High Level Warning Bunting - Ed & White
Roll
STZ500
Zebra Tape 500m
Roll
CHA
CTMM TBRW STZ500
SBRS
ROPES & STRAP
SFB150
RP10220
CODE
DESCRIPTION
Unit Qty
RP0630
Blue Polypropylene Rope 6mm x 30m
Each
RP06500
Blue Polypropylene Rope On Drum 6mm x 500m
Roll
RP10220
Blue Polypropylene Rope 10mm x 220m
Each
SB300
300mm Bungee Strap
5 Pack
SB450
450mm Bungee Strap
5 Pack
SB600
600mm Bungee Strap
5 Pack
SSRMIN
Mini Ratchet Strap 4m
Each
SSR63
Ratchet Strap 6m 3 Tonne
Each
SSR1010
Ratchet Strap 10m 10 Tonne
Each
SSR1010
SB300
SSRMIN
150
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT SITE SAFETY SIGNS
SITE SIGNS CODE
DESCRIPTION
Unit Qty
SPR6401
Sign Construction Site Keep Out 600 x 400mm
Each
SPR6402
Sign Caution Site Entrance 600 x 400mm
Each
SPR6403
Sign Report to Site Office 600 x 400mm
Each
SPR6404
Sign Safety Wear must be worn 600 x 400mm
Each
SPR6405
Sign Hi-Vis Jackets must be worn 600 x 400mm
Each
SPR6406
Sign Danger Demolition 600 x 400mm
Each
SPR9601
Sign Site Safety 900 x 600mm
Each
SPR9602
Sign Refurbishment in Progress 600 x 200mm
Each
With over 12,000 signs available next day please enquire Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
151
CONTRACTORS EQUIPMENT FIRST AID & FIRE EXTINGUISHERS
FIRST AID CODE
DESCRIPTION
Unit Qty
SFAT
First Aid Kit Travel
Each
SFAS
First Aid Kit Small (up to 5 persons)
Each
SFAM
First Aid Kit Medium (5-25 persons)
Each
SFAL
First Aid Kit Large (25+ persons)
Each
SPA
Assorted Plasters
Bx 100
SEWS
Eye Wash Station
Each
SEW500
Eye Wash 500ml
Each
SEWP20
Eye Wash Pods 20mm
Each
SBA
Accident Book
Each
SPHS
H & S Law Poster
Each
SPR
Resuscitation Poster
Each
FIRE EXTINGUISHERS CODE
152
DESCRIPTION
Unit Qty
SFEP2
Fire Extinguisher Powder 2Kg
Each
SFEP4
Fire Extinguisher Powder 4Kg
Each
SFEP6
Fire Extinguisher Powder 6Kg
Each
SFEW6
Fire Extinguisher Water 6L
Each
SFEW9
Fire Extinguisher Water 9L
Each
SFEF2
Fire Extinguisher Foam 2L
Each
SFEF6
Fire Extinguisher Faom 6L
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT BRICK LAYERS PROFILES, LINES & MARKERS
BRICKLAYERS PROFILES CODE
DESCRIPTION
Unit Qty
TBPEX
Blakes Profiles External Set
Each
TBPIN
Blakes Profiles Internal Set
Each
TBPIM
Blakes Profiles Intermediate Set
Each
TBPBD
Blakes Profiles Block Dollys
Each
TBPPEE
Blakes Profiles External Profile Extensions
Each
TBPCB9
Blakes Profiles Clamping Bolt 9”
Each
TBPCB14
Blakes Profiles Clamping Bolt 14”
Each
TBPCB18
Blakes Profiles Clamping Bolt 18”
Each
TBPC
Blakes Profiles Clamp
Each
TBPWN
Blakes Profiles Wing Nut
Each
TBPSD
Blakes Profiles Setting Device
Each
TBPSS
Blakes Profiles Setting Screw
Each
TBPSE
Blakes Profiles External Stabiliser
Each
TBPNHE
Blakes Profiles External Nylon Holder
Each
TBPPEI
Blakes Profiles Internal Profile Extension
Each
TBPHB9
Blakes Profiles Hook Bolt 9”
Each
TBPHB14
Blakes Profiles Hook Bolt 14”
Each
TBPSI
Blakes Profiles Internal Stabiliser
Each
TBPNHI
Blakes Profiles Internal Nylon Holder
Each
TBPQC
Blakes Profiles QQ Clips Pair
Each
LINES & MARKERS CODE
DESCRIPTION
Unit Qty
TLC50
Chalk Line 50m
Each
TLRP30
Orange Poly Ranging Line 30m
Each
TLBS75
Brick Line On Spool 75m
Each
TLBP36
Orange Poly Brick Line 36m
Each
TL18BL
Line Blocks & 18m line
Each
TLCN36B
Braided Nylon Chalk Line 36m
Each
TL18LP
2 Line Pins & 18m Line
Each
TLCN36T
Twisted Nylon Chalk Line 36m
Each
TLBHVY
Hi-Vis Brick Line Yellow
Each
TPC250Y
Chalk Powder Yellow 250g
Each
TLBHVP
Hi-Vis Brick Line Pink
Each
TPC250B
Chalk Powder Blue 250g
Each
TLP
Axis Line Pins Pair
Pair
Carpenters Pencil
Each
Carpenters Pencils Pack 12 with Sharpener
Pack
TPC250W
Chalk Powder White 250g
Each
CPC
TPC250R
Chalk Powder Red 250g
Each
CPC12S
TLC30
Chalk Line 30m
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
153
CONTRACTORS EQUIPMENT LIGHTS FOR SITES
SITE ELECTRICS CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
LH110P
110V Portable Light Halogen 500W
Each
LE110CR25
110V Cable Reel Extension Lead 25m
Each
LH240P
240V Portable Light Halogen 500W
Each
LE110CR50
110V Cable Reel Extension Lead 50m
Each
LH110TD
110V Tripod Light Double Halogen 500W
Each
LE110T14
110V Trailing Extension Lead 14m
Each
LH240TD
240V Tripod Light Double Halogen 500W
Each
ET1103
110V Transformer 3.3 KVA
Each
LH110T
110V Tripod Light Halogen 500W
Each
ET1103C
110V Transformer 3.3 KVA Continuous Output
Each
LH240T
240V Tripod Light Halogen 500W
Each
ET1105
110V Transformer 5 KVA
Each
LF110P
110V Portable Light Fluorescent 18W
Each
ET11010
110V Transformer 10 KVA (4x16A 2x 32A Outlets)
Each
LF5110T
110V Tripod Light Fluorescent 5'
Each
ESB4
4 Socket Distribution Box
Each
LF110T
Tripod Light 110V Fluorescent 18W
Each
ESS3
3 Way Splitter
Each
LG240
240V Goliath Light 55W
Each
ESS4
4 Way Spiderball Splitter Box
Each
LT110
110V Tasklight
Each
ESB1103
110V Splitter Branch 3 Way
Each
LT240
240V Tasklight
Each
HC1103
110V Heater Ceramic 3Kw
Each
LF25
Festoon Lighting Kit 25m
Each
HC24028
240V Heater Ceramic 2.8Kw
Each
LTB
Task Light Replacement Bulb
Each
HIR1103
110V Heater Infra-Red 3Kw
Each
LBFT1200
Fluorescent Tube
Each
HIR2403
240V Heater Infra-Red 3Kw
Each
LBH110500
110V Halogen Bulb 500W
Each
HFL1103
110V Heater Large Fan 3Kw
Each
LBH240500
240V Halogen Bulb 500W
Each
HFL2403
240V Heater Large Fan 3Kw
Each
LBH110300
110V 300W Halogen Bulb
Each
HFS2402
240V Heater Office Fan 2Kw
Each
LBH240300
240V 300W Halogen Bulb
Each
LBF60S
Festoon Bulb 60W Screw-in
Each
LBF60B
Festoon Bulb 60W Bayonet
Each
FPPPLUG32AMP
110V 32AMP Plug
Each
LS11032
110V 32AMP Socket
Each
FPPPLUG110
110V 16AMP Plug
Each
LS11016
110V 16AMP Socket
Each
LE240CR25
240V Cable Reel Extension Lead 25m
Each
LE240CR50
240V Cable Reel Extension Lead 50m
Each
LH110P LH110T
LT240
LT110 LBH110
154
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT LIGHTS FOR SITES
LG240
HC1103
LBF60S
ET1103
HFL1103 LE110CR25
LE110T14
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
155
CONTRACTORS EQUIPMENT TAPE MEASURES, LEVELS & DIGGING TOOLS
TAPE MEASURES CODE
DESCRIPTION
Unit Qty
TTM30F
Tape Measure Fibreglass 30m
Each
TTM50F
Tape Measure Fibreglass 50m
Each
TTM100F
Tape Measure Fibreglass 100m
Each
TTM5S
Tape Measure Steel 5m
Each
TTM8S
Tape Measure Steel 8m
Each
TTM30S
Tape Measure Steel 30m
Each
TTM50S
Tape Measure Steel 50m
Each
TTM30F
TTM50F
TTM100F
TTM8S
TTM5S
TTM50S
SPIRIT LEVELS CODE
DESCRIPTION
Unit Qty
STA043624
Fat Max Xtreme 600mm
Each
STA043648
Fat Max Xtreme 1200mm
Each
STA043672
Fat Max Xtreme 1800mm
Each
OXP024406
OX Pro Level 600mm
Each
OXP024409
OX Pro Level 900mm
Each
OXP024412
OX Pro Level1200mm
Each
OXP024418
OX Pro Level 1800mm
Each
OXP024420
OX Pro Level 2000mm
Each
DIGGING TOOLS CODE
DESCRIPTION
Unit Qty
TF
Road Digging Fork
Each
TSSM
Square Mouth Shovel
Each
TSTM
Taper Mouth Shovel
Each
TRT
Tarmac Rake
Each
THGM5
Grubbing Mattock Head 5Lb
Each
THPCP7
Pick Head Chisel & Point 7Lb
Each
THPH36
Pick Handle Hickory 36"
Each
THPF36
Pick Handle Fibreglass Yellow / Black 36"
Each
TSTM
TSSM
TF
THGM5
THPCP7
TRT
THPH36 THPF36
156
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT HAMMERS, SAWS & KNIVES
HAMMERS CODE
OXP083524
DESCRIPTION
TSFF7
Unit Qty
THS07F
Sledge Hammer Fibreglass 7Lb
Each
THS10F
Sledge Hammer Fibreglass 10Lb
Each
THS14F
Sledge Hammer Fibreglass 14Lb
Each
THC25F
Club Hammer Fibreglass 2.5Lb
Each
THC4F
Club Hammer Fibreglass 4Lb
Each
THC16
Steel Claw Hammer 16oz
Each
THC20
Steel Claw Hammer 20oz
Each
OXT091012
Trade Wrecking Bar 300mm
Each
OXT091018
Trade Wrecking Bar 450mm
Each
OXT091024
Trade Wrecking Bar 600mm
Each
OXT091036
Trade Wrecking Bar 900mm
Each
OXP083524
Pro Heavy Duty Wrecking Bar 600mm
Each
OXT0910224
THC4F
TCH20
KNIVES & SAWS CODE
DESCRIPTION
Unit Qty
OXP220310
Pro Heavy Duty Retractable Knife
Each
OXT220601
Trade Retractable Knife
Each
TKH
Silverline Knife & Holster
Each
TBK100
HD Trimming Knife Blades
Pk 100
TBK10
HD Trimming Knife Blades
Pk 10
TSFF7
‘Predator’ First Fix Saw 7TPI
Each
TSGP8
‘Predator’ General Purpose Saw 8TPI
Each
TSSF10
‘Predator’ Second Fix Saw 10TPI
Each
TSP10
‘Predator’ UPVC Saw 10TPI
Each
TSGP13
‘Predator’ Laminate Saw 13TPI
Each
TSJU20
Universal Jacksaw 8TPI 20”
Each
TSJX28
Jack Expert Concrete Saw 28”
Each
BAH33121
Roofing Bowsaw 21”
Each
BAH5121
Spare Blade for Above (BAH33121)
Each
TKH
OXP220310
TBK100
OXT220601
TBK10
TSJU20
TSFF7
TSGP8
TSF10
TXJX28
BAH33121
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
157
CONTRACTORS EQUIPMENT SCRAPERS, HACKSAWS & WHEELBARROWS
SCRAPERS & HACKSAWS CODE
DESCRIPTION
Unit Qty
TSFM
Mutt Tool
Each
TSF
Floor Scraper
Each
TSFB
Blade to Suit Floor Scraper
Each
TH12
Hacksaw 12"
Each
OXP130815
Pro Mini Professional Hacksaw 6”
Each
OXP131424
24 TPi Hacksaw Baldes 6”
Pk10
TH12B18
Hacksaw Blade 12" 18TPI
Each
TH12B24
Hacksaw Blade 12" 24TPI
Each
TSAS10
Straight Cutting Aviation Snips 10"
Each
OXP321119
Combination Pliers 190mm
Each
OXP320516
Diagonal Cutting Pliers 160mm
Each
OXP322225
Groove Joint Waterpump Pliers 250mm
Each
OXP320220
Long Nose Pliers 200mm
Each
OXP322016
Wire Strippers 160mm
Each
OXP200506
6” Heavy Duty Bar Clamp
Each
OXP200512
12” Heavy Duty Bar Clamp
Each
OXP200518
18” Heavy Duty Bar Clamp
Each
OXP200524
24” Heavy Duty Bar Clamp
Each
OXP200536
36” Heavy Duty Bar Clamp
Each
TSFM
TSFB
TSF
OXP320220
OXP321119
OXP322225
OXP320516 OXP322016
WHEELBARROWS CODE
DESCRIPTION
Unit Qty
TWG
Wheelbarrow Green Haemmerlin
Each
TWGV
Wheelbarrow Galvanised Haemmerlin
Each
TSTSW
Solid Wheel Sack Truck
Each
TH12
TH12
TH12B18
OXP200518
TWG
TSTSW
158
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT THE SMART MULTI-TOOL & ACCESSORIES
SMART MULTITOOL Versatile, universal multi fitting shank suiting all common oscillating tools.
MTB0PRKT
Positive, easy to remember coding system for re-ordering. Expansive broad range to ensure every possible application is covered with a SMART Tool blade
Shank compatible with: BOSCH, MILWAUKEE, MAKITA, FEIN, WORX & ROCKWELL
MTB032BM3
MTB044BMT3
SMART MULTI-TOOL CODE
DESCRIPTION
Unit Qty
MTB0PRKT
SMART Multi-Tool Professional Kit
Each
MTB032CT10
Multi Tool Coarse Tooth Wood Blade 32mm
Pk 10
MTB032AST3
Multi Tool Assortment Pack 32mm 3 Pack
Pk 3
MTB063CT3
Multi Tool Coarse Tooth Wood Blade 63mm
Pk 3
MTB032CT3
Multi Tool Coarse Tooth Wood Blade 32mm
Pk 3
MTB063CT10
Multi Tool Coarse Tooth Wood Blade 63mm
Pk 10
MTB063FT10
Multi Tool Fine Tooth Wood Blade 63mm
Pk 10
MTB032FT3
Multi Tool Fine Tooth Wood Blade 32mm
Pk 3
MTB035HCT10
Multi Tool Heat Treated Blade 35mm
PK 10
MTB035HCT3
Multi Tool Heat Treated Blade 35mm
PK 3
MTB075SB1
Multi Tool HSS Segment Saw Blade 75mm
Each
MTB032BM3
Multi Tool Metal Blade 32mm
Pk 3
MTB044BMT3
Multi Tool Titanium Nail Buster Blade 44mm
Pk 3
Portsmouth 023 92 385 656
MTB032FT3
MTB032CT3
MTB035HCT3
MTB063FT10
MTB063CT10
MTB063CT3
sales@strukta.co.uk
www.strukta.co.uk
159
CONTRACTORS EQUIPMENT OX PLASTERING TOOLS
®
UNLEASH THE POWER OXP010911
OXP013808
OXP011011
OXP010113 OXP016411
OXP013001
OXP010513
OX PLASTERING TOOLS
160
CODE
DESCRIPTION
Unit Qty
OXP010911
Plasterers Trowel Carbon Steel 11”
Each
OXP011011
Plasterers Trowel Stainless Steel 11”
Each
OXP016411
Polymer Sponge Float 12”
Each
OXP013001
Internal Corner Trowel Stainless Steel
Each
OXP013105
External Corner Trowel Stainless Steel
Each
OXP016811
Polyurethane Plasterers Float 11”
Each
OXP016933
Polyurethane Plasterers Hawk 13” x 13”
Each
OXP010513
Aluminium Plasterers Hawk 13” x 13”
Each
OXP013808
Small Trowel 8”
Each
OXP010113
Small Tool 13mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
OXP016811
OXP016933
www.strukta.co.uk
CONTRACTORS EQUIPMENT OX BRICKLAYING TOOLS
OXP018418
OXP011111
OXP011212
OXP013606
OXP018506
OXP100102
OKP011407
OXP103510
OXP011512
OX BRICKLAYING TOOLS CODE
DESCRIPTION
Unit Qty
OXP011111
Duragrip Brick Trowel London Pattern 11"
Each
OXP011212
Duragrip Brick Trowel Philadelphia Pattern 12"
Each
OXP013606
Pointing Trowel London 6"
Each
OXP018506
Pointing Trowel Philadelphia 6”
Each
OXP011407
Gauging Trowel 7”
Each
OXP011512
Tuck Pointer 12mm
Each
OXP031101
Brick Jointer 1/2” x 5/8”
Each
OXP031003
Brick Joint Raker
Each
OXP100102
Line Pins (Pack of 2)
Each
OXP103510
High-Vis Builders Line 350’ 105M
Each
OXP018418
Bucket Trowel 7”
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
OXP031101
OXP031003
www.strukta.co.uk
161
ygolonhcet retlif lanretnI
retliF gninaelc-fles ,orP xamitpO CONTRACTORS EQUIPMENT LADDERS, STEPS & HOSE FITTINGS
LADDERS, CODE ASUA500 AS2T ALCC
dleiy retaw % 59 revo sedivorP ygolonhcet retlif ytilauq hgih ,detnetap sesilitU )gninaelc-fles( ecnanetniam woL STEPS & MORTAR BATHS knat eht edisni ygolonhcet retlif gnivas-ecapS sloot rof deen eht Unit tuohQty tiw devomer ylisae eb nac gnisuoh retliF DESCRIPTION ytilibisiv retlif rof dil tnerapsnarT Aluminium Step-Up 500mm Each mqs 053 ot pu saera foor rof elbatiuS Aluminium 2 Tread Steps Each snoitcennoc mm 001 dradnatS teltuo dnEach a telni neewteb mm 561 fo thgieh tesffo woL Click & Climb Extending Ladder
LF5
Fibreglass/Aluminium 5 Tread Ladders
Each
LF8
Fibreglass/Aluminium 8 Tread Ladders
Each
CBP
Plasterers Bucket
Each
BH40
Hoist Bucket 40L eht fo gnisnir ralugeR ●
Each
CBM90
evlav citengam Mortar Bath 90L ytnarraw raey-2 ● Heavy Duty Mortar Bin 250L citengam ssarb .lcni ecirP ● Site Water Butt 210L evlav Water Butt 210L.elbac atad fo m 02 ●
Each
WMB250 SWB210 WB210
Each
● ● ● ● ● LF5
● ● ● ●
+lortnoC-a sehctiws dna knat eht ni level retaw tcaxe eht no resu eht smrofni +lortnoC-au noitarepo htooms serusne sihT .dedeen sa ekatni retaw gniknird ot yllacita ALCC
latigiD .gninnur yrd tsniaga detcetorp oslasi pmup eht dna noitalatsni eritne .spets % 1 ni tnuoma ekatni elbatsujda dna
Each Each
stcudorP lanoitid ASUA500
ttub niar dnuoR WB210
AS2T
ngised dradnats ttub niar dnuoR dna revoc htiw etelpmoC pat lasrevinu thgieH ]mm[ 067 808 008 520,1
dnats ttub niar dnuoR gniretaw a otni noitcartxe retaw ysae roF .pat eht gnisu nac mc 33 :thgieH
Ø ]mm[ 017 017 618 639
yticapaC ].rtl[ 502 522 003 005
CBP CBM90
3 BH40 SWB210
HOSE & HOSE ACCESSORIES CODE
DESCRIPTION
Unit Qty
CH30
Hose 30m
Each
CH50
Hose 50m
Each
CHCT
Hose Tap Connector
Each
CHCF
Hose Female Connector
Each
.scp 05 si redro Each muminiM .ylno klub ni redro ot elbaliava era sttub retaw esehT
CHJR
Hose Repair Joiner
CHNS
Hose Spray Nozzle
Each
CHC3W
Three way Hose Connector
Each
41
CH30 CHCF
162
CHJR
Salisbury 01722 414 011
CHCT
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT DECORATING EQUIPMENT
HOSE CLIPS CODE
DESCRIPTION
Unit Qty
JUB000
Hose Clip 9.5-12mm
Each
JUB00
Hose Clip 13-20mm
Each
JUB0X
Hose Clip 18-25mm
Each
JUB1
Hose Clip 25-35mm
Each
JUB1M
Hose Clip 32-45mm
Each
JUB2A
Hose Clip 35-50mm
Each
JUB3
Hose Clip 55-70mm
Each
JUB4
Hose Clip 70-90mm
Each
JUB5
Hose Clip 90-120mm
Each
JUB6X
Hose Clip 120-150mm
Each
DESCRIPTION
Unit Qty
ABRASIVES CODE DSP0506
Alu Oxide Sand Paper 60 Grit 5m
Roll
DSP0508
Alu Oxide Sand Paper 80 Grit 5m
Roll
DSP0512
Alu Oxide Sand Paper 120 Grit 5m
Roll
DSP5004
Aluminium Oxide Paper 100mm x 50m x 40g
Roll
DSP5006
Aluminium Oxide Paper 100mm x 50m x 60g
Roll
DSP5008
Aluminium Oxide Paper 100mm x 50m x 80g
Roll
DSP5010
Aluminium Oxide Paper 100mm x 50m x 100g
Roll
DSP5012
Aluminium Oxide Paper 100mm x 50m x 120g
Roll
DSP5018
Aluminium Oxide Paper 100mm x 50m x 180g
Roll PINWH5
PAINTING ACCESSORIES CODE
DESCRIPTION
Unit Qty
PINWH5
Intumescent Paint Steel White 5L
Each
PINWH20
Intumescent Paint Steel White 20L
Each
PRO1
Red Oxide Paint - 1 ltr
Can
PRO2
Red Oxide Paint - 2.5 ltr
Can
PRO5
Red Oxide Paint - 5 ltr
Can
PCGS500
Galvanised Cold Spray - 500ml
Can
PWU25
White Undercoat Paint 2.5 ltr
Can
PWP25
White Primer Paint 2.5 ltr
Can
PWG25
White Gloss Paint 2.5 ltr
Can
DWW
Wire Wool
Each
PBC89004
Paint Brush - 1/2"
Each
PBC89010
Paint Brush - 1"
Each
PBC89014
Paint Brush - 1 1/2"
Each
PBC89020
Paint Brush - 2"
Each
PBC89030
Paint Brush - 3"
Each
PBC89040
Paint Brush - 4"
Each
PBC89095
Paint Brush - 5 Piece set
Set
RC4129
Roller Tray - Small
Each
RC89210
Roller Tray - Large
Each
DPRE
Roller Extension Pole
Each
BP5W
Small Bucket 5kg White
Each
Portsmouth 023 92 385 656
PUC25 TRL
PUC25
TRS
sales@strukta.co.uk
www.strukta.co.uk
163
CONTRACTORS EQUIPMENT SALT, SPREADERS, DE-ICER & VACUUM CLEANERS
GRIT & SALT CODE
DESCRIPTION
Unit Qty
WGB196
Roadside Grit Bin 196 Litres
Each
SBR25
Brown Rock Salt
25kg
SWM25
White Marine Salt
25kg
TSSN
Snow Shovel
Eack
SS22
Salt Spreader
Eack
DIWP
Premium Windscreen De-Icer Trigger Spray
500ml
SWM25 SS22
SBR25
TSSN
WGB196
DIWP
VACUUM CLEANERS CODE
DESCRIPTION
Unit Qty
CVCWD110
Fox Wet & Dry Vacuum 110v
Each
CVCWD240
Fox Wet & Dry Vacuum 240v
Each
CVCB5
Fox Vacuum Bags
5pk
CVC110
Henry Vacuum 110v
Each
CVC240
Henry Vacuum 240v
Eack
CVCB10
Henry Vacuum Bags
10pk
CVCWD110
Built in 110v/240v power takeoff
CVC240
CVCB10
Dual inlet for dust extraction
164
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT SECURITY & JANITORIAL
LOCKS & CHAINS CODE
DESCRIPTION
Unit Qty
ABU6540
40mm Brass Padlock
Each
ABU6550
50mm Brass Padlock
Each
SPB50LS
50mm Long Shank Padlock
Each
SPBC
Combination Padlock
Each
ABU64TI50TC
50mm Titallium Padlock Twin Pack
2 Pk
KTL50
Key Tags
Box 50
KBL
Key Box Large
Each
KRJ
Large Jailer Ring
Each
SHSB115
Hasp & Staple 115mm
Each
SHSB152
Hasp & Staple 152mm
Each
SC6850
Chain 6 x 850mm
Each
SC81100
Chain 8 x 1100mm
Each
SC101400
Chain 10 x 1400mm
Each
ABU6540
ABU6550
ABU64TI50TC
KTL50
SHSB152
SHSB115 SC6850
KRJ KBL
BRUSHES & BROOMS CODE
DESCRIPTION
Unit Qty
BTS
Tar Brush Small
Each
BC300
Soft Broom 300mm
Each
BC450
Soft Broom 450mm
Each
BC600
Soft Broom 600mm
Each
BB300
Road Broom 300mm
Each
BB450
Stiff Broom 450mm
Each
BB600
Stiff Broom 600mm
Each
H2212
Handles 22mm x 1.2m
Each
H2912
Handles 29mm x 1.2m
Each
BBHD325
HD Stiff Broom
Each
BHST
Hand Brush Soft
Each
BHSF
Hand Brush Stiff
Each
BHW
Hand Brush Wire
Each
MOP12
String Mop & Handle
Each
BMP
Plastic Mop Bucket
Each
BMG
Galvanised Mop Bucket
Each
CDB
Dustpan and Brush
Each
CDBM
Dustpan and Bruch - Metal
Each
BB450
CDBM
CDB BMP
MOP12 BMG
BTS
BHW
BC300
BC600
BBHD325
Portsmouth 023 92 385 656
sales@strukta.co.uk
BHSF
www.strukta.co.uk
165
CONTRACTORS EQUIPMENT BUCKETS & JANITORIAL
BUCKETS,TUBS & RUBBISH SACKS CODE
DESCRIPTION
Unit Qty
CBGP3Y
Builders Bucket Yellow 14L
Each
CBGP3B
Builders Bucket Black 14L
Each
BF14L
Gorilla Tub 14L
Each
BF26L
Gorilla Tub 26L
Each
BF45L
Gorilla Tub 45L
Each
BF76L
Gorilla Tub 76L
Each
WDB95
Dustbin 95L
Each
WSR
Rubble Sacks
Pk 100
WSW
Black Refuse Sacks
Pk 100
BF45L
WDB95
WSR
CBGP3B
CBGP3Y
JANITORIAL PRODUCTS CODE
DESCRIPTION
Unit Qty
CMPC075
Multi Purpose Cleaner 750ml
Each
CPC050
PVC U Cream Cleaner 500ml
Each
CPS10
PVC U Solvent Cleaner 1L
Each
CG750
Glass Cleaner 750ml
Each
WS2
White Spirit 2L
Each
CGP50
All Purpose Cleaner 5L
Each
CT10
ACT Toilet Cleaner 1L
Each
CB50
Bleach 5L
Each
CD05
“One Shot” Drain Cleaner 500ml
Each
CWU10
Washing Up Liquid Detergent 1L
Each
CAH0414
Gojo Hand Cleaner 414ml
Each
CAH3780
Gojo Hand Cleaner 3.78L
Each
CF5
Flash Floor Cleaner 5L
Each
CWU50
Washing Up Liquid Detergent 5L
Each
WCB10
Barrier Cream 1L
Each
CUB3
Urinal Blocks 3kg
Tub
CG750
CB50 CWU50
CD05
CAH3780 CMPC075
WS2 CWU10
CPC050
166
CUB3
Salisbury 01722 414 011
CF5
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT JANITORIAL & HYGIENE
JANITORIAL PRODUCTS CODE
DESCRIPTION
Unit Qty
CCJ
General Purpose ‘J’ Cloths
Pk 50
CWHD
HD Boss Wipes
Pk 400
CWS10
Sweatshirt Wipes 10kg
Box
CSS
Sponge Scourers
Pk 10
CSJ
Jumbo Sponge
Each
CTHC
C-Fold Hand Towels (Pk 3600)
Box
CTHD
Hand Towel Dispenser
Each
CTHDCF
Centre Feed Hand Towel Dispenser
Each
CTHCFLB
Centre Feed Paper Towel Large
Roll
CWHCF
Centre Feed Paper Towel Small
Roll
CWAP100
All Purpose Wipes
Pk 80
CTR36
Toilet Roll 2 Ply (36 Rolls)
36 rolls
CTRU40
Ultimate Toilet Roll (40 Rolls)
40 rolls
CBT
Toilet Brush
Each
CWGR
Grime-eeze Wipes
Tub
CTHDCF
CTHCFLB
CSS
CSJ
CWGR CCJ
CTHD CTHC
CBT CTR36 CTUR40
CWHD
CWAP100
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
167
CONTRACTORS EQUIPMENT SITE CANTEEN & RESTROOM EQUIPMENT
SITE SETUP CODE
DESCRIPTION
Unit Qty
CCD
Dish Cloths
Pk 10
CTT
Cotton Tea Towel
Pk 2
WFUC
Under Counter Fridge
Each
WFCT
Counter Top Fridge
Each
WM
Microwave
Each
WK
Kettle
Each
WT
Toaster
Each
WHC
Convector Heater
Each
BEVERAGES ETC
168
CODE
DESCRIPTION
Unit Qty
WC750
Instant Coffee 750g
Tin
WCD500
Instant Coffee Decaffeinated 500g
Tin
WT400
Tea Bags 400 Approx
Bag
WSG1
Sugar 2kg
Bag
CCF1000
Foam Cups 1000x
Pack
WCP2000
Plastic Cups 2000x
Pack
TSM12
Metal Tea Spoons 12x
Pack
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT SDS MASONRY DRILL BITS
SDS MASONRY DRILL BITS CODE
DESCRIPTION
Unit Qty
SDS0416
SDS Drill Bit 4.0mm 160mm
Each
SDS4316
SDS Drill Bit 4.35mm 160mm
Each
SDS0511
SDS Drill Bit 5.0mm 110mm
Each
SDS0516
SDS Drill Bit 5.0mm 160mm
Each
SDS05516
SDS Drill Bit 5.5mm 160mm
Each
SDS05521
SDS Drill Bit 5.5mm 210mm
Each
SDS0616
SDS Drill Bit 6.0mm 160mm
Each
SDS0621
SDS Drill Bit 6.0mm 210mm
Each
SDS0626
SDS Drill Bit 6.0mm 260mm
Each
SDS06516
SDS Drill Bit 6.5mm 160mm
Each
SDS6517
SDS Drill Bit 6.5mm 170mm
Each
SDS0716
SDS Drill Bit 7.0mm 160mm
Each
SDS0721
SDS Drill Bit 7.0mm 210mm
Each
SDS0816
SDS Drill Bit 8.0mm 160mm
Each
SDS0821
SDS Drill Bit 8.0mm 210mm
Each
SDS0826
SDS Drill Bit 8.0mm 260mm
Each
SDS0845
SDS Drill Bit 8.0mm 450mm
Each
SDS1016
SDS Drill Bit 10mm 160mm
Each
SDS1021
SDS Drill Bit 10mm 210mm
Each
SDS1026
SDS Drill Bit 10mm 260mm
Each
SDS1045
SDS Drill Bit 10mm 450mm
Each
SDS1060
SDS Drill Bit 10mm 600mm
Each
SDS10100
SDS Drill Bit 10mm 1000mm
Each
SDS1126
SDS Drill Bit 11mm 260mm
Each
SDS1215
SDS Drill Bit 12mm 150mm
Each
SDS1221
SDS Drill Bit 12mm 210mm
Each
SDS1226
SDS Drill Bit 12mm 260mm
Each
SDS1245
SDS Drill Bit 12mm 450mm
Each
SDS1260
SDS Drill Bit 12mm 600mm
Each
SDS12100
SDS Drill Bit 12mm 1000mm
Each
SDS1326
SDS Drill Bit 13mm 260mm
Each
SDS1345
SDS Drill Bit 13mm 450mm
Each
SDS1421
SDS Drill Bit 14mm 210mm
Each
SDS1426
SDS Drill Bit 14mm 260mm
Each
SDS1445
SDS Drill Bit 14mm 450mm
Each
SDS1845
SDS Drill Bit 18mm 450mm
Each
SDS1460
SDS Drill Bit 14mm 600mm
Each
SDS2021
SDS Drill Bit 20mm 210mm
Each
SDS14100
SDS Drill Bit 14mm 1000mm
Each
SDS2026
SDS Drill Bit 20mm 260mm
Each Each Each
SDS1526
SDS Drill Bit 15mm 260mm
Each
SDS2030
SDS Drill Bit 20mm 300mm
SDS1545
SDS Drill Bit 15mm 450mm
Each
SDS2045
SDS Drill Bit 20mm 450mm
SDS1621
SDS Drill Bit 16mm 210mm
Each
SDS2060
SDS Drill Bit 20mm 600mm
Each
SDS1626
SDS Drill Bit 16mm 260mm
Each
SDS2226
SDS Drill Bit 22mm 260mm
Each
SDS1630
SDS Drill Bit 16mm 300mm
Each
SDS2245
SDS Drill Bit 22mm 450mm
Each
SDS1645
SDS Drill Bit 16mm 450mm
Each
SDS2426
SDS Drill Bit 24mm 260mm
Each
SDS1660
SDS Drill Bit 16mm 600mm
Each
SDS2445
SDS Drill Bit 24mm 450mm
Each
SDS16100
SDS Drill Bit 16mm 1000mm
Each
SDS2526
SDS Drill Bit 25mm 260mm
Each
SDS Drill Bit 25mm 450mm
Each
SDS1821
SDS Drill Bit 18mm 210mm
Each
SDS2545
SDS1826
SDS Drill Bit 18mm 260mm
Each
SDS2626
SDS Drill Bit 26mm 260mm
Each
SDS1830
SDS Drill Bit 18mm 300mm
Each
SDS2645
SDS Drill Bit 26mm 450mm
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
169
CONTRACTORS EQUIPMENT STANDARD, MULTI-CONSTRUCTION & HSS DRILL BITS
STANDARD MASONRY DRILL BITS CODE
DESCRIPTION
Unit Qty
BM515
Masonry Drill Bit 5 X 150mm
Each
BM5515
Masonry Drill Bit 5.5 X 150mm
Each
BM615
Masonry Drill Bit 6 X 150mm
Each
BM715
Masonry Drill Bit 7 X 150mm
Each
BM821
Masonry Drill Bit 8 X 210mm
Each
BM1220
Masonry Drill Bit 12 X 200mm
Each
BM14
Masonry Drill bit 14 x 150mm
Each
BM1440
Masonry Drill Bit 14 X 400mm
Each
BM1630
Masonry Drill Bit 16 X 300mm
Each
BM1830
Masonry Drill Bit 18 X 300mm
Each
BM2030
Masonry Drill Bit 20 X 300mm
Each
BM2230
Masonry Drill Bit 22 X 300mm
Each
BM2530
Masonry Drill Bit 25 X 300mm
Each
BM2540
Masonry Drill Bit 25 X 400mm
Each
MULTI-CONSTRUCTION DRILL BITS CODE
DESCRIPTION
Unit Qty
BMC05
Multi-Construction Drill Bit 5.0mm
Each
BMC06
Multi-Construction Drill Bit 6.0mm
Each
BMC07
Multi-Construction Drill Bit 7.0mm
Each
BMC08
Multi-Construction Drill Bit 8.0mm
Each
BMC10
Multi-Construction Drill Bit 10.0mm
Each
BMC12
Multi-Construction Drill Bit 12.0mm
Each
HSS DRILL BITS
170
CODE
DESCRIPTION
Unit Qty
HSSL02
HSS Drill Bits Long Series 2.0mm
Each
HSSL03
HSS Drill Bits Long Series 3.0mm
Each
HSSL32
HSS Drill Bits Long Series 3.2mm
Each
HSSL04
HSS Drill Bits Long Series 4.0mm
Each
HSSL42
HSS Drill Bits Long Series 4.2mm
Each
HSSL05
HSS Drill Bits Long Series 5.0mm
Each
HSSL06
HSS Drill Bits Long Series 6.0mm
Each
HSSL68
HSS Drill Bits Long Series 6.8mm
Each
HSSL07
HSS Drill Bits Long Series 7.0mm
Each
HSSL08
HSS Drill Bits Long Series 8.0mm
Each
HSSL85
HSS Drill Bits Long Series 8.5mm
Each
HSSL09
HSS Drill Bits Long Series 9.0mm
Each
HSSL10
HSS Drill Bits Long Series 10.0mm
Each
HSSL11
HSS Drill Bits Long Series 11.0mm
Each
HSSL12
HSS Drill Bits Long Series 12.0mm
Each
HSSL13
HSS Drill Bits Long Series 13.0mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT HSS STANDARD DRILL BITS
HSS STANDARD DRILL BITS CODE
DESCRIPTION
Unit Qty
HSS01
HSS Drill Bit 1mm
Each
HSS015
HSS Drill Bit 1.5mm
Each
HSS02
HSS Drill Bit 2mm
Each
HSS025
HSS Drill Bit 2.5mm M3
Each
HSS03
HSS Drill Bit 3mm
Each
HSS035
HSS Drill Bit 3.5mm
Each
HSS04
HSS Drill Bit 4mm
Each
HSS045
HSS Drill Bit 4.5mm
Each
HSS05
HSS Drill Bit 5mm M6
Each
HSS055
HSS Drill Bit 5.5mm
Each
HSS06
HSS Drill Bit 6mm M7
Each
HSS065
HSS Drill Bit 6.5mm
Each
HSS07
HSS Drill Bit 7mm
Each
HSS075
HSS Drill Bit 7.5mm
Each
HSS08
HSS Drill Bit 8mm
Each
HSS085
HSS Drill Bit 8.5mm M10
Each
HSS09
HSS Drill Bit 9mm
Each
HSS095
HSS Drill Bit 9.5mm M11
Each
HSS10
HSS Drill Bit 10mm
Each
HSS105
HSS Drill Bit 10.5mm
Each
HSS11
HSS Drill Bit 11mm
Each
HSS115
HSS Drill Bit 11.5mm
Each
HSS12
HSS Drill Bit 12mm M14
Each
HSS125
HSS Drill Bit 12.5mm
Each
HSS13
HSS Drill Bit 13mm
Each
HSS16
HSS Drill Bit 16mm
Each
HSS18
HSS Drill Bit 18mm
Each
HSS20
HSS Drill Bit 20mm
Each
HSS22
HSS Drill Bit 22mm
Each
HSS25
HSS Drill Bit 25mm
Each
HSSDS19
HSS Drill Bit Set 19 Piece
Each
HSSDS25
HSS Drill Bit Set 25 Piece
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
171
CONTRACTORS EQUIPMENT AUGER BITS
AUGER BITS STANDARD LENGTH CODE
DESCRIPTION
Unit Qty
AS06
Auger Bit Standard Length 8mm
Each
AS08
Auger Bit Standard Length 8mm
Each
AS10
Auger Bit Standard Length 10mm
Each
AS11
Auger Bit Standard Length 11mm
Each
AS12
Auger Bit Standard Length 12mm
Each
AS13
Auger Bit Standard Length 13mm
Each
AS14
Auger Bit Standard Length 14mm
Each
AS15
Auger Bit Standard Length 15mm
Each
AS16
Auger Bit Standard Length 16mm
Each
AS18
Auger Bit Standard Length 18mm
Each
AS19
Auger Bit Standard Length 19mm
Each
AS20
Auger Bit Standard Length 20mm
Each
AS22
Auger Bit Standard Length 22mm
Each
AS24
Auger Bit Standard Length 24mm
Each
AS25
Auger Bit Standard Length 25mm
Each
AS26
Auger Bit Standard Length 26mm
Each
AS28
Auger Bit Standard Length 28mm
Each
AS30
Auger Bit Standard Length 30mm
Each
AS32
Auger Bit Standard Length 32mm
Each
ASSET8
8-Piece Auger Bit Set
Each
AUGER BITS LONG SERIES CODE
172
DESCRIPTION
Unit Qty
AL06
Auger Bit Long Series 6mm
Each
AL08
Auger Bit Long Series 8mm
Each
AL10
Auger Bit Long Series 10mm
Each
AL12
Auger Bit Long Series 12mm
Each
AL13
Auger Bit Long Series 13mm
Each
AL14
Auger Bit Long Series 14mm
Each
AL16
Auger Bit Long Series 16mm
Each
AL18
Auger Bit Long Series 18mm
Each
AL19
Auger Bit Long Series 19mm
Each
AL20
Auger Bit Long Series 20mm
Each
AL22
Auger Bit Long Series 22mm
Each
AL24
Auger Bit Long Series 24mm
Each
AL25
Auger Bit Long Series 25mm
Each
AL26
Auger Bit Long Series 26mm
Each
AL28
Auger Bit Long Series 28mm
Each
AL32
Auger Bit Long Series 32mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT FLAT BITS & HOLE SAWS
FLAT BITS CODE
DESCRIPTION
Unit Qty
BF06
Flat Bit 6mm
Each
BF08
Flat Bit 8mm
Each
BF10
Flat Bit 10mm
Each
BF11
Flat Bit 11mm
Each
BF12
Flat Bit 12mm
Each
BF13
Flat Bit 13mm
Each
BF14
Flat Bit 14mm
Each
BF16
Flat Bit 16mm
Each
BF18
Flat Bit 18mm
Each
BF19
Flat Bit 19mm
Each
BF20
Flat Bit 20mm
Each
BF22
Flat Bit 22mm
Each
BF25
Flat Bit 25mm
Each
BF28
Flat Bit 28mm
Each
BF32
Flat Bit 32mm
Each
BF35
Flat Bit 35mm
Each
BF36
Flat Bit 36mm
Each
BF38
Flat Bit 38mm
Each
DESCRIPTION
Unit Qty
HOLE SAWS CODE AH1430
Arbor 14-30 x 11mm
Each
AH32210
Arbor 32-210 x 11mm
Each
ARD
Arbor Replacement Drill
Each
SH016
Hole Saw 16mm
Each
SH019
Hole Saw 19mm
Each
SH020
Hole Saw 20mm
Each
SH021
Hole Saw 21mm
Each
SH022
Hole Saw 22mm
Each
SH025
Hole Saw 25mm
Each
SH029
Hole Saw 29mm
Each
SH032
Hole Saw 32mm
Each
SH035
Hole Saw 35mm
Each
SH038
Hole Saw 38mm
Each
SH040
Hole Saw 40mm
Each
SH073
Hole Saw 73mm
Each
SH041
Hole Saw 41mm
Each
SH076
Hole Saw 76mm
Each
SH043
Hole Saw 43mm
Each
SH079
Hole Saw 79mm
Each
SH044
Hole Saw 44mm
Each
SH083
Hole Saw 83mm
Each
SH048
Hole Saw 48mm
Each
SH086
Hole Saw 86mm
Each
SH051
Hole Saw 51mm
Each
SH089
Hole Saw 89mm
Each
SH054
Hole Saw 54mm
Each
SH092
Hole Saw 92mm
Each
SH057
Hole Saw 57mm
Each
SH095
Hole Saw 95mm
Each
SH060
Hole Saw 60mm
Each
SH102
Hole Saw 102mm
Each
SH064
Hole Saw 64mm
Each
SH105
Hole Saw 105mm
Each
SH065
Hole Saw 65mm
Each
SH111
Hole Saw 111mm
Each
SH067
Hole Saw 67mm
Each
SH114
Hole Saw 114mm
Each
SH068
Hole Saw 68mm
Each
SH127
Hole Saw 127mm
Each
SH070
Hole Saw 70mm
Each
SH152
Hole Saw 152mm
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
173
CONTRACTORS EQUIPMENT DIAMOND DRILLS, CHISELS & ROUTER BITS
DIAMOND TILE DRILL BITS CODE
DESCRIPTION
Unit Qty
XT105
Diamond Tile Drill Bit 5 x 55mm
Each
XT106
Diamond Tile Drill Bit 6 x 55mm
Each
XT107
Diamond Tile Drill Bit 7 x 55mm
Each
XT108
Diamond Tile Drill Bit 8 x 55mm
Each
XT110
Diamond Tile Drill Bit 10 x 55mm
Each
XT120
Diamond Tile Drill Bit 20 x 55mm
Each
XTKIT
Diamond Tile Drill Bit Set 5,6,7,8,10mm
Each
SDS PLUS CHISEL DRILL BITS CODE
DESCRIPTION
Unit Qty
SDSCP14
SDS Plus Chisel Drill Bit 14mm Point 250mm
Each
SDSCF20
SDS Plus Chisel Drill Bit 20mm Flat 250mm
Each
SDSCS40
SDS Plus Chisel Drill Bit 40mm Spade 250mm
Each
SDSCC22
SDS Plus Chisel Drill Bit 22mm Chasing 250mm
Each
SDSCT75
SDS Plus Chisel Drill Bit 75mm Tile 250mm
Each
ROUTER BITS CODE
174
DESCRIPTION
Unit Qty
RB11
Router Bit Single Flute 3.2 x 8mm
Each
RB111
Router Bit 9.5mm Ovolo Rounding Over
Each
RB112
Router Bit 6.3mm Ovolo Rounding Over
Each
RB21
Router Bit Two Flute 4.0 x 11mm
Each
RB210
Router Bit Two Flute 12.7 x 19mm
Each
RB211
Router Bit Two Flute 12.7 x 50mm
Each
RB212
Router Bit Two Flute 12.7 x 63mm
Each
RB213
Router Bit Two Flute 15.9 x 19mm
Each
RB214
Router Bit Two Flute 18.2 x 21mm
Each
RB215
Router Bit Two Flute 19.0 x 25mm
Each
RB216
Router Bit Two Flute 15.9 x 50mm
Each
RB22
Router Bit Two Flute 5.0 x 16mm
Each
RB227
Router Bit Two Flute 15.0 x 25mm
Each
RB23
Router Bit Two Flute 6.0 x 16mm
Each
RB24
Router Bit Two Flute 8.0 x 19mm
Each
RB25
Router Bit Two Flute 11.0 x 25mm
Each
RB26
Router Bit Two Flute 12.0 x 19mm
Each
RB27
Router Bit Two Flute 6.3 x 16mm
Each
RB28
Router Bit Two Flute 10.0 x 19mm
Each
RB29
Router Bit Two Flute 10.0 x 35mm
Each
RB41
Router Bit Round Over 15.8 x 9.5mm
Each
RB51
Router Bit V Groove 13 x 19.1mm
Each
RB62
Router Bit Radius 5.0 x 10 x 18mm
Each
RB72
Router Bit Mini Trim 6.3 x 25.4mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT JIGSAW & RECIPROCATING SAW BLADES
JIGSAW BLADES CODE
DESCRIPTION
Unit Qty
OJB36
TX-36 Optimaxx Vari-Use Jigsaw Blades
Pack 5
DJB16
T144D Fast Cut for All Woods
Pack 5
DJB11
T101B Clean cut - Hardwood, softwood & plywood & plastic
Pack 5
FAIJBT111C
Softwood and Composite Materials 8TPI 75mm
Pack 5
DJB13
T101BR Splinter-free (reverse teeth) Woods & Laminates
Pack 5
FAIJBT244D
Curve Cutting All Woods
Pack 5
FAIJBT119B
Softwood and Composite Materials 12TPI 60mm
Pack 5
FAIJBT119BO
Curve Cutting Softwoods
Pack 5
DJB12
T101D Wood Cutting Jigsaw Blade
Pack 5
DJB34
T127D Aluminium Sheet Pipes & Profile 3-15mm Thick
Pack 5
DJB31
T118A Progressive Mild Steel - 1.5-4mm Thick
Pack 5
DJB32
T118B Non-Ferrous Metals Progressive 3-10mm Thick
Pack 5
RECIPROCATING SAW BLADES CODE
DESCRIPTION
Unit Qty
BSRM1015
Reciprocating Saw Blades Metal 10TPI 150mm
Pack 5
BSRM1415
Reciprocating Saw Blades Metal 14TPI 150mm
Pack 5
BSRM1815
Reciprocating Saw Blades Metal 18TPI 150mm
Pack 5
BSRM1820
Reciprocating Saw Blades Metal 18TPI 200mm
Pack 5
BSRM1423
Reciprocating Saw Blades Metal 14TPI 230mm
Pack 5
BSRW415
Reciprocating Saw Blades All Woods Fast Coarse Cut 4TPI 150mm
Pack 5
BSRW525
Reciprocating Saw Blades All Woods Fast Coarse Cut 5TPI 250mm
Pack 5
BSRMW1015
Reciprocating Saw Blades Metal & Wood 10TPI 150mm
Pack 5
BSRMW1020
Reciprocating Saw Blades Metal & Wood 10TPI 200mm
Pack 5
BSRMW1030
Reciprocating Saw Blades Metal & Wood 10TPI 300mm
Pack 5
BSRN0615
Reciprocating Saw Blades Nail Embedded Wood 6TPI 150mm
Pack 5
BSRN0622
Reciprocating Saw Blades Nail Embedded Wood 6TPI 225mm
Pack 5
BSRD0622
Reciprocating Saw Blades Demolition 6TPI 225mm
Pack 5
BSRW1015
Reciprocating Saw Blades Construction Wood 10TPI 150mm
Pack 5
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
175
CONTRACTORS EQUIPMENT CIRCULAR SAW BLADES & METAL CUTTING DISCS
CIRCULAR SAW BLADES CODE
DESCRIPTION
Unit Qty
BSC1604020
Circular Saw Blade 160mm 20mm Bore 40TPI
Each
BSC1653630
Circular Saw Blade 165mm 30mm Bore 36TPI
Each
BSC1842816
Circular Saw Blade 184mm 16mm Bore 28TPI
Each
BSC1842830
Circular Saw Blade 184mm 30mm Bore 28TPI
Each
BSC1844816
Circular Saw Blade 184mm 16mm Bore 48TPI
Each
BSC1902830
Circular Saw Blade 190mm 30mm Bore 28TPI
Each
BSC1904030
Circular Saw Blade 190mm 30mm Bore 40TPI
Each
BSC1904830
Circular Saw Blade 190mm 30mm Bore 48TPI
Each
BSC2162830
Circular Saw Blade 216mm 30mm Bore 28TPI
Each
BSC2166030
Circular Saw Blade 216mm 30mm Bore 60TPI
Each
BSC2352830
Circular Saw Blade 235mm 30mm Bore 28TPI
Each
BSC2164030
Circular Saw Blade 216mm 30mm Bore 40TPI
Each
BSC2354030
Circular Saw Blade 235mm 30mm Bore 40TPI
Each
BSC2502830
Circular Saw Blade 250mm 30mm Bore 28TPI
Each
BSC2508030
Circular Saw Blade 250mm 30mm Bore 80TPI
Each
BSC2504030
Circular Saw Blade 250mm 30mm Bore 40TPI
Each
BSC2506030
Circular Saw Blade 250mm 30mm Bore 60TPI
Each
BSC2604830
Circular Saw Blade 260mm 30mm Bore 48TPI
Each
BSC3056030
Circular Saw Blade 305mm 30mm Bore 60TPI
Each
BSC3059630
Circular Saw Blade 305mm 30mm Bore 96TPI
Each
BSC1652420
Circular Saw Blade 165mm 20mm Bore 24TPI
Each
BSC1654020
Circular Saw Blade 165mm 20mm Bore 40TPI
Each
BSC1804030
Circular Saw Blade 180mm 30mm Bore 40TPI
Each
BSC1902816
Circular Saw Blade 190mm 16mm Bore 28TPI
Each
BSC1902820
Circular Saw Blade 190mm 20mm Bore 28TPI
Each
BSC1904020
Circular Saw Blade 190mm 20mm Bore 40TPI
Each
BSC1903230
Circular Saw Blade 190mm 30mm Bore 32TPI
Each
BSCR3016
Circular Saw Blade Reducing Ring 30-16mm
Each
METAL CUTTING DISCS
176
CODE
DESCRIPTION
Unit Qty
BCM100
Cutting Metal Disc 100 x 16 x 3.2mm
Each
BGM100
Grinding Metal Disc 100 x 16 x 3.2mm
Each
BCSS115
St/St Cutting Disc 115 x 16 x 1.0mm
Each
BCM115
Cutting Metal Disc 115 x 22 x 3.2mm
Each
BGM115
Grinding Metal Disc 115 x 22 x 3.2mm
Each
BCM23019
Cutting Metal Disc 230 x 22 x 1.9mm
Each
BCM230
Cutting Metal Disc 230 x 22 x 3.2mm
Each
BCM300S
Cutting Metal Disc 300 x 20 x 3.2mm
Each
BCM300L
Cutting Metal Disc 300 x 22 x 3.2mm
Each
BCM350
Cutting Metal Disc 350 x 22 x 3.2mm
Each
BCS100
Cutting Stone Disc 100 x 16 x 3.2mm
Each
BCS115
Cutting Stone Disc 115 x 22 x 3.2mm
Each
BCS230
Cutting Stone Disc 230 x 22 x 3.2mm
Each
BCS300S
Cutting Stone Disc 300 x 20 x 3.2mm
Each
BCS300L
Cutting Stone Disc 300 x 22 x 3.2mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
CONTRACTORS EQUIPMENT DIAMOND BLADES & DRY CORE DRILL BITS
STANDARD DIAMOND BLADES CODE
DESCRIPTION
Unit Qty
BMR45RD6
Mortar Rake Blade 115 x 22mm Yellow
Each
BMR45RX6
Mortar Rake Blade 115 x 22mm Red
Each
BDS115
Standard Diamond Blade 115x22mm 12mm Segment
Each
BDS230
Standard Diamond Blade 230x22mm 12mm Segment
Each
BDS300
Standard Diamond Blade 300x20mm 12mm Segment
Each
BDS30022
Standard Diamond Blade 300x22mm 12mm Segment
Each
BDS350
Standard Diamond Blade 350x20mm 12mm Segment
Each
BDM115
Multi-Steel Diamond Blade 115x20mm 12mm Segment
Each
BDM125
Multi-Steel Diamond Blade 125x20mm 12mm Segment
Each
BDM230
Multi-Steel Diamond Blade 230x20mm 12mm Segment
Each
BDM300
Multi-Steel Diamond Blade 300x20mm 12mm Segment
Each
BDM300L
Multi-Steel Diamond Blade 300x22mm 12mm Segment
Each
BDM350S
Multi-Steel Diamond Blade 350x20mm 12mm Segment
Each
BDM350L
Multi-Steel Diamond Blade 350x25mm 12mm Segment
Each
DRY CORE DRILL BITS CODE
DESCRIPTION
Unit Qty
BDC028
Dry Core Drill Bit 28 x 300mm
Each
BDC032
Dry Core Drill Bit 32 x 150mm
Each
BDC038
Dry Core Drill Bit 38 x 150mm
Each
BDC048
Dry Core Drill Bit 48 x 150mm
Each
BDC052
Dry Core Drill Bit 52 x 150mm
Each
BDC065
Dry Core Drill Bit 65 x 150mm
Each
BDC078
Dry Core Drill Bit 78 x 150mm
Each
BDC102
Dry Core Drill Bit 102 x 150mm
Each
BDC108
Dry Core Drill Bit 108 x 150mm
Each
BDC117
Dry Core Drill Bit 117 x 150mm
Each
BDC127
Dry Core Drill Bit 127 x 150mm
Each
BDC142
Dry Core Drill Bit 142 x 150mm
Each
BDC152
Dry Core Drill Bit 152 x 150mm
Each
SDC
Dry Core Drilling Set Standard
Each
SDP
Dry Core Drilling Set Premium
Each
ACCESSORIES CODE
DESCRIPTION
Unit Qty
BDCAH
Hex Adaptor
Each
BDCASDS
SDS Adaptor
Each
BDCASDS250
SDS Adaptor 250mm
Each
BDCTA
A' Taper Drill
Each
BDCDK
Drift Key
Each
BDCER
Extension Rod
Each
BDCG1221
Guide Rod 12mm Diameter
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
177
CONTRACTORS EQUIPMENT SCREWDRIVER BITS
SCREWDRIVER BITS CODE
DESCRIPTION
Unit Qty
SBS9
Screwdriver Bit Set 9 Piece
Each
BSS2545
Screwdriver Bit Slotted Standard 25 x 4.5mm
Each
BSS2555
Screwdriver Bit Slotted Standard 25 x 5.5mm
Each
BSS2565
Screwdriver Bit Slotted Standard 25 x 6.5mm
Each
BSS2580
Screwdriver Bit Slotted Standard 25 x 8.0mm
Each
BSPH251
Screwdriver Bit PHD Phillips Std 25mm No.1
Each
BSPH252
Screwdriver Bit PHD Phillips Std 25mm No.2
Each
BSPH253
Screwdriver Bit PHD Phillips Std 25mm No.3
Each
BSPZ251
Screwdriver Bit PZD Pozi Drive Std 25mm No.1
Each
BSPZ252
Screwdriver Bit PZD Pozi Drive Std 25mm No.2
Each
BSPZ253
Screwdriver Bit PZD Pozi Drive Std 25mm No.3
Each
BSPZ254
Screwdriver Bit PZD Pozi Drive Std 25mm No.4
Each
BSTX2515
Screwdriver Bit TRX Torx Standard 25 x 1.5mm
Each
BSTX2520
Screwdriver Bit TRX Torx Standard 25 x 2.0mm
Each
BSTX2525
Screwdriver Bit TRX Torx Standard 25 x 2.5mm
Each
BSTX2530
Screwdriver Bit TRX Torx Standard 25 x 3.0mm
Each
BSPZ1502
Long Screwdriver Bit Pozi 150mm No.2
Each
BSPZ1503
Long Screwdriver Bit Pozi 150mm No.3
Each
BSPHT251
Screwdriver Bit Phillips Titanium 25mm No.1
Each
BSPHT252
Screwdriver Bit Phillips Titanium 25mm No.2
Each
BSPHT253
Screwdriver Bit Phillips Titanium 25mm No.3
Each
BSPZT251
Screwdriver Bit Pozi Titanium 25mm No.1
Each
BSPZT252
Screwdriver Bit Pozi Titanium 25mm No.2
Each
BSPZT253
Screwdriver Bit Pozi Titanium 25mm No.3
Each
DH8
8mm Hex Driver
Each
HBS
Standard Bit Holder
Each
HBP
Pro Bit Holder "Click Fit"
Each
WERAPZ1
Wera Bi-TOR Bit PZ1
Each
WERAPZ2
Wera Bi-TOR Bit PZ2
Each
WERAPZ3
Wera Bi-TOR Bit PZ3
Each
BSPZ252 BSTX2520
BSS2565 BSPZT252
HBP
WERAPZ2 HBS
DH8
178
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
179
SCREWS, BOLTS & FIXINGS
NEW
TIGER MULTI-PURPOSE WOODSCREWS
PRODUCT
IN STORE NOW
BEST VALUE
MULTI-PURPOSE
WOOD SCREWS
TIGER AD PAGE TIGER MULTI-PURPOSE WOODSCREWS
180
• Pozi Countersunk • Zinc Coated • Single Thread
CODE
DESCRIPTION
Unit Qty
WMT4070
Tiger Zinc Multi-Purpose Screw 4.0 x 70mm
1000
WMT3012
Tiger Zinc Multi-Purpose Screw 3.0 x12mm
1000
WMT4550
Tiger Zinc Multi-Purpose Screw 4.5 x 50mm
1000
WMT3020
Tiger Zinc Multi-Purpose Screw 3.0 x 20mm
1000
WMT4560
Tiger Zinc Multi-Purpose Screw 4.5 x 60mm
1000
WMT3025
Tiger Zinc Multi-Purpose Screw 3.0 x 25mm
1000
WMT4570
Tiger Zinc Multi-Purpose Screw 4.5 x 70mm
1000
WMT4580
Tiger Zinc Multi-Purpose Screw 4.5 x 80mm
1000
WMT3030
Tiger Zinc Multi-Purpose Screw 3.0 x 30mm
1000
WMT3512
Tiger Zinc Multi-Purpose Screw 3.5 x 12mm
1000
WMT5025
Tiger Zinc Multi-Purpose Screw 5.0 x 25mm
1000
WMT3516
Tiger Zinc Multi-Purpose Screw 3.5 x 16mm
1000
WMT5030
Tiger Zinc Multi-Purpose Screw 5.0 x 30mm
1000
WMT3520
Tiger Zinc Multi-Purpose Screw 3.5 x 20mm
1000
WMT5040
Tiger Zinc Multi-Purpose Screw 5.0 x 40mm
1000
WMT3525
Tiger Zinc Multi-Purpose Screw 3.5 x 25mm
1000
WMT5050
Tiger Zinc Multi-Purpose Screw 5.0 x 50mm
1000
WMT3530
Tiger Zinc Multi-Purpose Screw 3.5 x 30mm
1000
WMT5060
Tiger Zinc Multi-Purpose Screw 5.0 x 60mm
1000
WMT3535
Tiger Zinc Multi-Purpose Screw 3.5 x 35mm
1000
WMT5070
Tiger Zinc Multi-Purpose Screw 5.0 x 70mm
1000
WMT3540
Tiger Zinc Multi-Purpose Screw 3.5 x 40mm
1000
WMT5080
Tiger Zinc Multi-Purpose Screw 5.0 x 80mm
1000
WMT5090
Tiger Zinc Multi-Purpose Screw 5.0 x 90mm
1000
WMT3550
Tiger Zinc Multi-Purpose Screw 3.5 x 50mm
1000
WMT4016
Tiger Zinc Multi-Purpose Screw 4.0 x 16mm
1000
WMT5010
Tiger Zinc Multi-Purpose Screw 5.0 x100mm
1000
WMT4020
Tiger Zinc Multi-Purpose Screw 4.0 x 20mm
1000
WMT5012
Tiger Zinc Multi-Purpose Screw 5.0 x120mm
1000
WMT4025
Tiger Zinc Multi-Purpose Screw 4.0 x 25mm
1000
WMT6040
Tiger Zinc Multi-Purpose Screw 6.0 x 40mm
1000
WMT4030
Tiger Zinc Multi-Purpose Screw 4.0 x 30mm
1000
WMT6050
Tiger Zinc Multi-Purpose Screw 6.0 x 50mm
1000
WMT4035
Tiger Zinc Multi-Purpose Screw 4.0 x 35mm
1000
WMT6060
Tiger Zinc Multi-Purpose Screw 6.0 x 60mm
1000
WMT4040
Tiger Zinc Multi-Purpose Screw 4.0 x 40mm
1000
WMT6070
Tiger Zinc Multi-Purpose Screw 6.0 x 70mm
1000
WMT4045
Tiger Zinc Multi-Purpose Screw 4.0 x 45mm
1000
WMT6080
Tiger Zinc Multi-Purpose Screw 6.0 x 80mm
1000
WMT6010
Tiger Zinc Multi-Purpose Screw 6.0 x 100mm
1000
WMT4050
Tiger Zinc Multi-Purpose Screw 4.0 x 50mm
1000
WMT4060
Tiger Zinc Multi-Purpose Screw 4.0 x 60mm
1000
Salisbury 01722 414 011
WMT6012
Tiger Zinc Multi-Purpose Screw 6.0 x 120mm
1000
WMT6015
Tiger Zinc Multi-Purpose Screw 6.0 x 150mm
1000
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS DECK SCREWS, PLASTIC PLUGS & SCREW CAPS
DECKING SCREWS CODE
DESCRIPTION
Unit Qty
SDC4550
Coated Decking Screw 4.5x50mm
1000
SDC4560
Coated Decking Screw 4.5x60mm
1000
SDC4570
Coated Decking Screw 4.5x70mm
1000
SDC4580
Coated Decking Screw 4.5x80mm
1000
Allow 50mm minimum embedment when choosing screw length
NYLON & PLASTIC PLUGS CODE
DESCRIPTION
Unit Qty
PPYE
Plastic Plugs Yellow 4-8
1000
PPRE
Plastic Plugs Red 6-10 Drill Size 5.5mm
1000
PPBR
Plastic Plugs Brown 10-14 Drill Size 7mm
1000
PN1050
Nylon Plug 10 x 50mm
100
PN1260
Nylon Plug 12 x 60mm
100
PN1475
Nylon Plug 14 x 75mm
100
PPBR
PPRE
NP1050
PPYE
PLASTERBOARD FIXINGS CODE
DESCRIPTION
Unit Qty
FP12
Plasterboard Fixings 12mm
100
AHW560
Hollow Wall Anchor M5 x 60mm
100
SHW
Setting Tool
Each
AST550
Spring Toggles M5 x 50mm
100
AST580
Spring Toggles M5 x 80mm
100
AHW560
FP12
AST550
AST580
SCREW CAPS
CSN08
CODE
DESCRIPTION
Unit Qty
CSDP8W
Dome Caps White Plastic 8g
100
CSDP10W
Dome Caps White Plastic 10g
100
CSDP8BL
Dome Caps Light Brown Plastic 8g
100
CSDP8BD
Dome Caps Dark Brown Plastic 8g
100
CSDP8B
Dome Caps Black Plastic 8g
100
CSBS06
Brass Surface Screw Cups 6g
1000
CSBS08
Brass Surface Screw Cups 8g
1000
CSBS10
Brass Surface Screw Cups 10g
1000
CSN06
Nickel Surface Screw Cups 6g
1000
CSN08
Nickel Surface Screw Cups 8g
1000
CSN10
Nickel Surface Screw Cups 10g
1000
PTBL
Plus Tops Black
1000
PTDB
Plus Tops Dark Brown
1000
PTLB
Plus Tops Light Brown
1000
PTWH
Plus Tops White
1000
Portsmouth 023 92 385 656
CSBS08
sales@strukta.co.uk
CSDP8BD
CSDP8W
PTLB CSDP8BL
www.strukta.co.uk
181
SCREWS, BOLTS & FIXINGS TIMBERLOK, HEADLOK & LEDGERLOK SCREWS
TIMBERLOK SCREWS CODE
DESCRIPTION
Unit Qty
ST10012
100mm Timberlok Screw
12
ST15012
150mm Timberlok Screw
12
ST20012
200mm Timberlok Screw
12
ST25012
250mm Timberlok Screw
12
ST065
65mm Timberlok Screw
50
ST100
100mm Timberlok Screw
50
ST150
150mm Timberlok Screw
50
ST200
200mm Timberlok Screw
50
ST250
250mm Timberlok Screw
50
ST065250
65mm Timberlok Screw
500
ST100250
100mm Timberlok Screw
250
ST150250
150mm Timberlok Screw
250
ST200250
200mm Timberlok Screw
250
ST250250
250mm Timberlok Screw
250
Heavy duty wood screws that replace coach bolts in a variety of applications
HEADLOK SCREWS CODE
DESCRIPTION
Unit Qty
SH115
Headlok Screws 115mm
250
SH125
Headlok Screws 125mm
250
SH150
Headlok Screws 150mm
250
SH175
Headlok Screws 175mm
250
SH200
Headlok Screws 200mm
250
SH225
Headlok Screws 225mm
250
SH250
Headlok Screws 250mm
250
SPH125
Headlok Screws 125mm
50
SPH150
Headlok Screws 150mm
50
SPH175
Headlok Screws 175mm
50
SPH200
Headlok Screws 200mm
50
SPH250
Headlok Screws 250mm
50
LEDGERLOK SCREWS CODE
DESCRIPTION
Unit Qty
SL87250
Ledgerlok Screws 87mm
250
SL95250
Ledgerlok Screws 95mm
250
SL135250
Ledgerlok Screws 135mm
250
SL140250
Ledgerlok Screws 140mm
250
SL8750
Ledgerlok Screws 87mm
50
SL14050
Ledgerlok Screws 140mm
50
Heavy duty flathead screws for an outstanding fixing for warm roofs
STRUCTURAL TIMBER SCREWS
182
CODE
DESCRIPTION
Unit Qty
SST6365
Structural Timber Screws 6.7 x 65mm
100
SST6390
Structural Timber Screws 6.7 x 90mm
100
SST6312
Structural Timber Screws 6.7 x 125mm
100
SST6314
Structural Timber Screws 6.7 x 150mm
100
SST6319
Structural Timber Screws 6.7 x 190mm
100
SST6324
Structural Timber Screws 6.7 x 240mm
100
SST6330
Structural Timber Screws 6.7 x 300mm
100
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS OPTIMAXX PREMIUM WOODSCREWS
OPTIMUM DESIGN MAXIMUM PERFORMANCE
NEW
OPTIMAXX WOODSCREWS CODE
DESCRIPTION
Unit Qty
WPO3520
Optimaxx Yellow Pozi Woodscrew 3.5 x 20mm
1000
WPO3525
Optimaxx Yellow Pozi Woodscrew 3.5 x 25mm
1000
WPO3530
Optimaxx Yellow Pozi Woodscrew 3.5 x 30mm
1000
WPO3540
Optimaxx Yellow Pozi Woodscrew 3.5 x 40mm
1000
WPO4025
Optimaxx Yellow Pozi Woodscrew 4.0 x 25mm
1000
WPO4030
Optimaxx Yellow Pozi Woodscrew 4.0 x 30mm
1000
WPO4035
Optimaxx Yellow Pozi Woodscrew 4.0 x 35mm
1000
WPO4040
Optimaxx Yellow Pozi Woodscrew 4.0 x 40mm
1000
WPO4045
Optimaxx Yellow Pozi Woodscrew 4.0 x 45mm
1000
WPO4050
Optimaxx Yellow Pozi Woodscrew 4.0 x 50mm
1000
WPO4060
Optimaxx Yellow Pozi Woodscrew 4.0 x 60mm
1000
WPO4070
Optimaxx Yellow Pozi Woodscrew 4.0 x 70mm
1000
WPO5040
Optimaxx Yellow Pozi Woodscrew 5.0 x 40mm
1000
WPO5050
Optimaxx Yellow Pozi Woodscrew 5.0 x 50mm
1000
WPO5060
Optimaxx Yellow Pozi Woodscrew 5.0 x 60mm
1000
WPO5070
Optimaxx Yellow Pozi Woodscrew 5.0 x 70mm
1000
WPO5080
Optimaxx Yellow Pozi Woodscrew 5.0 x 80mm
1000
WPO5090
Optimaxx Yellow Pozi Woodscrew 5.0 x 90mm
1000
WPO5010
Optimaxx Yellow Pozi Woodscrew 5.0 x 100mm
1000
WPO6080
Optimaxx Yellow Pozi Woodscrew 6.0 x 80mm
1000
WPO6010
Optimaxx Yellow Pozi Woodscrew 6.0 x 100mm
1000
WOPSC
Optimaxx Sorta-Case V1
Each
Portsmouth 023 92 385 656
• Unique 24 slots cut into the underside of the head - self countersinks into all material without the need to counter bore and without surface damage. • Double reinforced collar significantly strengthens the underside of the head, preventing snapping and allowing a deeper pozi recess. • Sharp, wide, deep thread formation coated with a unique lubricant.
• Specifically positioned long thin groove - dramatically reduces pressure build up on insertion by dispersing wood fibres, preventing splitting when screwing close to the edge • Razor sharp point as low as 20 degrees, with a thread that extends to the tip of the screw - giving you an immediate start even with the hardest, smoothest surfaces.
• Sharp sawtooth formation cut out of the bottom threads - on insertion the threads bite into the timber reducing torque and resistance, enabling fast penetration without a pilot hole.
sales@strukta.co.uk
www.strukta.co.uk
183
SCREWS, BOLTS & FIXINGS THREADED BAR, STUDS & NUTS
STUDS WITH NUT & WASHER CODE
DESCRIPTION
Unit Qty
SNW0811
Stud with Nut & Washer M8x110mm
10
SNW1013
Stud with Nut & Washer M10x130mm
10
SNW1216
Stud with Nut & Washer M12x160mm
10
SNW1619
Stud with Nut & Washer M16x190mm
10
SNW2026
Stud with Nut & Washer M20x260mm
10
SNW2430
Stud with Nut & Washer M24x300mm
5
THREADED BAR - BZP CODE
DESCRIPTION
Unit Qty
BT6Z1
Threaded Bar B.Z.P. M6x1m
Each
BT6Z3
Threaded Bar B.Z.P. M6x3m
Each
BT8Z1
Threaded Bar B.Z.P. M8x1m
Each
BT8Z3
Threaded Bar B.Z.P. M8x3m
Each
BT10Z1
Threaded Bar B.Z.P. M10x1m
Each
BT10Z3
Threaded Bar B.Z.P. M10x3m
Each
BT12Z1
Threaded Bar B.Z.P. M12x1m
Each
BT12Z3
Threaded Bar B.Z.P. M12x3m
Each
BT16Z1
Threaded Bar B.Z.P. M16x1m
Each
BT16Z3
Threaded Bar B.Z.P. M16x3m
Each
BT20Z1
Threaded Bar B.Z.P. M20x1m
Each
BT20Z3
Threaded Bar B.Z.P. M20x3m
Each
BT24Z1
Threaded Bar B.Z.P. M24x1m
Each
STUD CONNECTORS CODE
DESCRIPTION
Unit Qty
NSCZ103
Nut Stud Connector BZP M10 X 30
100
NSCZ1235
Nut Stud Connector BZP M12 X 35
100
NSCZ1645
Nut Stud Connector BZP M16 X 45
100
ZINC NUTS CODE
DESCRIPTION
Unit Qty
NZ06
Steel Nut B.Z.P. M6
100
NZ08
Steel Nut B.Z.P. M8
100
NZ10
Steel Nut B.Z.P. M10
100
NZ12
Steel Nut B.Z.P. M12
100
NZ16
Steel Nut B.Z.P. M16
100
NZ20
Steel Nut B.Z.P. M20
100
NZ24
Steel Nut B.Z.P. M24
100
STEEL DOME NUTS
184
CODE
DESCRIPTION
Unit Qty
NDZ6
Steel Dome Nut BZP M6
100
NDZ8
Steel Dome Nut BZP M8
100
NDZ10
Steel Dome Nut BZP M10
100
NDZ12
Steel Dome Nut BZP M12
100
NDZ16
Steel Dome Nut BZP M16
100
NDZ20
Steel Dome Nut BZP M20
100
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS WASHERS, & CONNECTORS
SQUARE PLATE WASHERS CODE
DESCRIPTION
Unit Qty
WSP12Z
Square Plate Washers 50 x 50mm M12
100
WSP16Z
Square Plate Washers 50 x 50mm M16
100
WSP20Z
Square Plate Washers 50 x 50mm M20
100
STEEL ROUND WASHERS CODE
DESCRIPTION
Unit Qty
WFA06Z
Steel Round Washers B.Z.P. Form A M6
100
WFA08Z
Steel Round Washers B.Z.P. Form A M8
100
WFA10Z
Steel Round Washers B.Z.P. Form A M10
100
WFA12Z
Steel Round Washers B.Z.P. Form A M12
100
WFA16Z
Steel Round Washers B.Z.P. Form A M16
100
WFA20Z
Steel Round Washers B.Z.P. Form A M20
100
WFA24Z
Steel Round Washers B.Z.P. Form A M24
100
STEEL REPAIR WASHERS CODE
DESCRIPTION
Unit Qty
WRZ0620
Steel Repair Washers B.Z.P. M6 x 20mm
100
WRZ0825
Steel Repair Washers B.Z.P. M8 x 25mm
100
WRZ1030
Steel Repair Washers B.Z.P. M10 x 30mm
100
WRZ1250
Steel Repair Washers B.Z.P. M12 x 50mm
100
CONNECTORS & WASHERS CODE
DESCRIPTION
Unit Qty
CTDSZ12
Double Sided Timber Connectors B.Z.P M12 x 50mm
100
CTSSZ12
Single Sided Timber Connectors B.Z.P M12 x 50mm
100
CTDSZ16
Double Sided Timber Connectors B.Z.P M16 x 50mm
100
Don’t forget Chemical Resins
see page 44
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
185
SCREWS, BOLTS & FIXINGS COACH BOLTS
BOLTS - CUP SQUARE HEX CODE
DESCRIPTION
Unit Qty
BCZ0630
Bolt Cup Square Hex Zinc M6x30mm
100
BCZ0650
Bolt Cup Square Hex Zinc M6x50mm
100
BCZ0675
Bolt Cup Square Hex Zinc M6x75mm
100
BCZ0610
Bolt Cup Square Hex Zinc M6x100mm
100
BCZ0615
Bolt Cup Square Hex Zinc M6x150mm
100
BCZ0850
Bolt Cup Square Hex Zinc M8x50mm
100
BCZ0880
Bolt Cup Square Hex Zinc M8x80mm
100
BCZ8100
Bolt Cup Square Hex Zinc M8x100mm
100
BCZ8110
Bolt Cup Square Hex Zinc M8x110mm
100
BCZ8130
Bolt Cup Square Hex Zinc M8x130mm
100
BCZ8150
Bolt Cup Square Hex Zinc M8x150mm
100
BCZ8180
Bolt Cup Square Hex Zinc M8x180mm
100
BCZ1050
Bolt Cup Square Hex Zinc M10x50mm
100
BCZ1210
Bolt Cup Square Hex Zinc M12x100mm
100
BCZ1060
Bolt Cup Square Hex Zinc M10x60mm
100
BCZ1211
Bolt Cup Square Hex Zinc M12x110mm
100
BCZ1080
Bolt Cup Square Hex Zinc M10x80mm
100
BCZ1212
Bolt Cup Square Hex Zinc M12x120mm
100
BCZ1010
Bolt Cup Square Hex Zinc M10x100mm
100
BCZ1213
Bolt Cup Square Hex Zinc M12x130mm
100
BCZ1011
Bolt Cup Square Hex Zinc M10x110mm
100
BCZ1215
Bolt Cup Square Hex Zinc M12x150mm
100
BCZ1012
Bolt Cup Square Hex Zinc M10x120mm
100
BCZ1218
Bolt Cup Square Hex Zinc M12x180mm
100
BCZ1013
Bolt Cup Square Hex Zinc M10x130mm
100
BCZ1222
Bolt Cup Square Hex Zinc M12x220mm
100
BCZ1015
Bolt Cup Square Hex Zinc M10x150mm
100
BCZ1224
Bolt Cup Square Hex Zinc M12x240mm
100
BCZ1016
Bolt Cup Square Hex Zinc M10x160mm
100
BCZ1226
Bolt Cup Square Hex Zinc M12x260mm
100
BCZ1018
Bolt Cup Square Hex Zinc M10x180mm
100
BCZ1228
Bolt Cup Square Hex Zinc M12x280mm
100
BCZ1020
Bolt Cup Square Hex Zinc M10x200mm
100
BCZ1680
Bolt Cup Square Hex Zinc M16x80mm
100
BCZ1022
Bolt Cup Square Hex Zinc M10x220mm
100
BCZ1611
Bolt Cup Square Hex Zinc M16x110mm
100
BCZ1024
Bolt Cup Square Hex Zinc M10x240mm
100
BCZ1613
Bolt Cup Square Hex Zinc M16x130mm
100
BCZ1260
Bolt Cup Square Hex Zinc M12x60mm
100
BCZ1615
Bolt Cup Square Hex Zinc M16x150mm
100
BCZ1280
Bolt Cup Square Hex Zinc M12x80mm
100
BCZ1618
Bolt Cup Square Hex Zinc M16x180mm
100
HEX SET SCREWS - ZINC
186
CODE
DESCRIPTION
Unit Qty
BHZ0650
Hex Set Screw Zinc M6x50mm
100
BHZ0850
Hex Set Screw Zinc M8x50mm
100
BHZ0870
Hex Set Screw Zinc M8x70mm
100
BHZ0810
Hex Set Screw Zinc M8 X 100mm
100
BHZ1050
Hex Set Screw Zinc M10x50mm
100
BHZ1080
Hex Set Screw Zinc M10x80mm
100
BHZ1010
Hex Set Screw Zinc M10x100mm
100
BHZ1240
Hex Set Screw Zinc M12x40mm
100
BHZ1280
Hex Set Screw Zinc M12x80mm
100
BHZ1211
Hex Set Screw Zinc M12x110mm
100
BHZ1630
Hex Set Screws Zinc M16 X 30mm
100
BHZ1640
Hex Set Screws Zinc M16 X 40mm
100
BHZ1650
Hex Set Screw Zinc M16x50mm
100
BHZ1660
Hex Set Screw Zinc M16x60mm
100
BHZ1611
Hex Set Screw Zinc M16x110mm
100
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS HEX BOLTS
BOLTS - HEX ROUND HEX CODE
DESCRIPTION
Unit Qty
BHZ0625
Bolt Hex Round Hex Zinc M6x25mm
100
BHZ0630
Bolt Hex Round Hex Zinc M6x30mm
100
BHZ0640
Bolt Hex Round Hex Zinc M6x40mm
100
BHZ0650
Bolt Hex Round Hex Zinc M6x50mm
100
BHZ0830
Bolt Hex Round Hex Zinc M8x30mm
100
BHZ0840
Bolt Hex Round Hex Zinc M8x40mm
100
BHZ0850
Bolt Hex Round Hex Zinc M8x50mm
100
BHZ0875
Bolt Hex Round Hex Zinc M8x75mm
100
BHZ0880
Bolt Hex Round Hex Zinc M8x80mm
100
BHZ0810
Bolt Hex Round Hex Zinc M8x100mm
100
BHZ0813
Bolt Hex Round Hex Zinc M8x130mm
100
BHZ1040
Bolt Hex Round Hex Zinc M10x40mm
100
BHZ1050
Bolt Hex Round Hex Zinc M10x50mm
100
BHZ1080
Bolt Hex Round Hex Zinc M10x80mm
100
BHZ1011
Bolt Hex Round Hex Zinc M10x110mm
100
BHZ1012
Bolt Hex Round Hex Zinc M10x120mm
100
BHZ1013
Bolt Hex Round Hex Zinc M10x130mm
100
BHZ1015
Bolt Hex Round Hex Zinc M10x150mm
100
BHZ1018
Bolt Hex Round Hex Zinc M10x180mm
100
BHZ1240
Bolt Hex Round Hex Zinc M12x40mm
100
BHZ1280
Bolt Hex Round Hex Zinc M12x80mm
100
BHZ1211
Bolt Hex Round Hex Zinc M12x110mm
100
BHZ1615
Bolt Hex Round Hex Zinc M16x150mm
100
BHZ1212
Bolt Hex Round Hex Zinc M12x120mm
100
BHZ1618
Bolt Hex Round Hex Zinc M16x180mm
100
BHZ1213
Bolt Hex Round Hex Zinc M12x130mm
100
BHZ1620
Bolt Hex Round Hex Zinc M16x200mm
100
BHZ1215
Bolt Hex Round Hex Zinc M12x150mm
100
BHZ1622
Bolt Hex Round Hex Zinc M16x220mm
100
BHZ1218
Bolt Hex Round Hex Zinc M12x180mm
100
BHZ2040
Bolt Hex Round Hex Zinc M20x40mm
100
BHZ1222
Bolt Hex Round Hex Zinc M12x220mm
100
BHZ2050
Bolt Hex Round Hex Zinc M20x50mm
100
BHZ1224
Bolt Hex Round Hex Zinc M12x240mm
100
BHZ2070
Bolt Hex Round Hex Zinc M20x70mm
100
BHZ1226
Bolt Hex Round Hex Zinc M12x260mm
100
BHZ2080
Bolt Hex Round Hex Zinc M20x80mm
100
BHZ1640
Bolt Hex Round Hex Zinc M16x40mm
100
BHZ2010
Bolt Hex Round Hex Zinc M20x100mm
100
BHZ1611
Bolt Hex Round Hex Zinc M16x110mm
100
BHZ2013
Bolt Hex Round Hex Zinc M20x130mm
100
BHZ1612
Bolt Hex Round Hex Zinc M16x120mm
100
BHZ2015
Bolt Hex Round Hex Zinc M20x150mm
100
BHZ1613
Bolt Hex Round Hex Zinc M16x130mm
100
BHZ2022
Bolt Hex Round Hex Zinc M20x220mm
100
Don’t forget
Auger & Flat Bits
see page 172
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
187
SCREWS, BOLTS & FIXINGS ZINC COACHSCREWS & HAMMER FIXINGS
ZINC COACHSCREWS CODE
DESCRIPTION
Unit Qty
SCZ0625
Coachscrew Hex Head Zinc 6x25mm
100
SCZ0630
Coachscrew Hex Head Zinc 6x30mm
100
SCZ0640
Coachscrew Hex Head Zinc 6x40mm
100
SCZ0650
Coachscrew Hex Head Zinc 6x50mm
100
SCZ0660
Coachscrew Hex Head Zinc 6x60mm
100
SCZ0670
Coachscrew Hex Head Zinc 6x70mm
100
SCZ0610
Coachscrew Hex Head Zinc 6x100mm
100
SCZ0612
Coachscrew Hex Head Zinc 6x120mm
100
SCZ0840
Coachscrew Hex Head Zinc 8x40mm
100
SCZ0850
Coachscrew Hex Head Zinc 8x50mm
100
SCZ0860
Coachscrew Hex Head Zinc 8x60mm
100
SCZ0875
Coachscrew Hex Head Zinc 8x75mm
100
SCZ0890
Coachscrew Hex Head Zinc 8x90mm
100
SCZ0810
Coachscrew Hex Head Zinc 8x100mm
100
SCZ0812
Coachscrew Hex Head Zinc 8x120mm
100
SCZ0815
Coachscrew Hex Head Zinc 8x150mm
100
SCZ0830
Coachscrew Hex Head Zinc 8x300mm
100
SCZ1025
Coachscrew Hex Head Zinc 10x25mm
100
SCZ1030
Coachscrew Hex Head Zinc 10x30mm
100
SCZ1040
Coachscrew Hex Head Zinc 10x40mm
100
SCZ1050
Coachscrew Hex Head Zinc 10x50mm
100
SCZ1060
Coachscrew Hex Head Zinc 10x60mm
100
SCZ1080
Coachscrew Hex Head Zinc 10x80mm
100
SCZ1213
Coachscrew Hex Head Zinc 12x130mm
100
SCZ1010
Coachscrew Hex Head Zinc 10x100mm
100
SCZ1215
Coachscrew Hex Head Zinc 12x150mm
100
SCZ1012
Coachscrew Hex Head Zinc 10x120mm
100
SCZ1218
Coachscrew Hex Head Zinc 12x180mm
100
SCZ1015
Coachscrew Hex Head Zinc 10x150mm
100
SCZ1220
Coachscrew Hex Head Zinc 12x200mm
100
Coachscrew Hex Head Zinc 12x220mm
100
Coachscrew Hex Head Zinc 12x240mm
100
SCZ1018
Coachscrew Hex Head Zinc 10x180mm
100
SCZ1222
SCZ1250
Coachscrew Hex Head Zinc 12x50mm
100
SCZ1224
SCZ1260
Coachscrew Hex Head Zinc 12x60mm
100
SCZ1228
Coachscrew Hex Head Zinc 12x280mm
100
SCZ1275
Coachscrew Hex Head Zinc 12x75mm
100
SCZ1615
Coachscrew Hex Head Zinc 16x150mm
100
SCZ1290
Coachscrew Hex Head Zinc 12x90mm
100
SCZ1618
Coachscrew Hex Head Zinc 16x180mm
100
SCZ1210
Coachscrew Hex Head Zinc 12x100mm
100
SCZ1620
Coachscrew Hex Head Zinc 16x200mm
100
HAMMER FIXINGS CODE
188
DESCRIPTION
Unit Qty
FH640
Hammer Fixings M6x40mm
100
FH660
Hammer Fixings M6x60mm
100
FH670
Hammer Fixings M6x70mm
100
FH680
Hammer Fixings M6x80mm
100
FH860
Hammer Fixings M8x60mm
100
FH880
Hammer Fixings M8x80mm
100
FH8100
Hammer Fixings M8x100mm
100
FH8120
Hammer Fixings M8x120mm
100
FH8135
Hammer Fixings M8x135mm
100
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS FRAME, SHIELD & SLEEVE ANCHORS
NYLON FRAME ANCHORS CODE
DESCRIPTION
Unit Qty
AF860
Nylon Frame Anchor M8x60mm
100
AF880
Nylon Frame Anchor M8x80mm
100
AF8100
Nylon Frame Anchor M8x100mm
100
AF8120
Nylon Frame Anchor M8x120mm
100
AF8135
Nylon Frame Anchor M8x135mm
100
AF1080
Nylon Frame Anchor M10x80mm
100
AF10100
Nylon Frame Anchor M10x100mm
100
AF10115
Nylon Frame Anchor M10x115mm
100
AF10135
Nylon Frame Anchor M10x135mm
100
AF10160
Nylon Frame Anchor M10x160mm
100
SHIELD ANCHORS CODE
DESCRIPTION
Unit Qty
ASHLB610
Shield Anchors Loose Bolt M6 x 10mm
100
ASHLB625
Shield Anchors Loose Bolt M6 x 25mm
100
ASHLB640
Shield Anchors Loose Bolt M6 x 40mm
100
ASHLB810
Shield Anchors Loose Bolt M8 x 10mm
100
ASHLB825
Shield Anchors Loose Bolt M8 x 25mm
100
ASHLB840
Shield Anchors Loose Bolt M8 x 40mm
100
ASHLB1010
Shield Anchors Loose Bolt M10 x 10mm
100
ASHLB1025
Shield Anchors Loose Bolt M10 x 25mm
100
ASHLB1050
Shield Anchors Loose Bolt M10 x 50mm
100
ASHLB1075
Shield Anchors Loose Bolt M10 x 75mm
100
ASHLB1210
Shield Anchors Loose Bolt M12 x 10mm
100
ASHLB1225
Shield Anchors Loose Bolt M12 x 25mm
100
ASHLB1240
Shield Anchors Loose Bolt M12 x 40mm
100
ASHLB1260
Shield Anchors Loose Bolt M12 x 60mm
100
ASHLB1615
Shield Anchors Loose Bolt M16 x 15mm
100
ASHLB1630
Shield Anchors Loose Bolt M16 x 30mm
100
ASHLB1660
Shield Anchors Loose Bolt M16 x 60mm
100
ASHLB840
ASHLB1050
SLEEVE ANCHORS BOLT PROJECTING CODE
DESCRIPTION
Unit Qty
ASLBP665
Sleeve Anchors - Bolt Projecting M6 65Mm
100
ASLBP860
Sleeve Anchors - Bolt Projecting M8 60Mm
100
ASLBP8100
Sleeve Anchors - Bolt Projecting M8 100Mm
100
ASLBP1060
Sleeve Anchors - Bolt Projecting M10 60Mm
100
ASLBP10100
Sleeve Anchors - Bolt Projecting M10 100Mm
100
ASLBP1270
Sleeve Anchors - Bolt Projecting M12 70Mm
100
ASLBP12100
Sleeve Anchors - Bolt Projecting M12 100Mm
100
ASLBP12125
Sleeve Anchors - Bolt Projecting M12 125Mm
100
ASLBP16150
Sleeve Anchors - Bolt Projecting M16 150Mm
100
Portsmouth 023 92 385 656
ASLB1060
sales@strukta.co.uk
www.strukta.co.uk
189
SCREWS, BOLTS & FIXINGS THROUGH BOLTS & CONCRETE SCREWS
THROUGH BOLT CODE
DESCRIPTION
Unit Qty
BT0870
Through Bolt M8 x 70mm
100
BT1080
Through Bolt M10 x 80mm
100
BT1009
Through Bolt M10 x 95mm
100
BT1011
Through Bolt M10 x 115mm
100
BT1014
Through Bolt M10 x 140mm
100
BT1280
Through Bolt M12 x 80mm
100
BT12100
Through Bolt M12 x 100mm
100
BT12120
Through Bolt M12 x 120mm
100
BT1215
Through Bolt M12 x 150mm
100
BT1610
Through Bolt M16 x 100mm
100
BT1612
Through Bolt M16 x 120mm
100
BT1615
Through Bolt M16 x 150mm
100
BT1617
Through Bolt M16 x 170mm
100
BT1080
TAPCON SELF TAPPING HEX CODE
DESCRIPTION
Unit Qty
SC48032
Masonry Screw CSK 4.8 x 32mm (7mm Fixing)
100
SST4845C
Masonry Screw CSK 4.8 x 45mm (20mm Fixing)
100
SST4857C
Masonry Screw CSK 4.8 x 57mm (32mm Fixing)
100
SST4870C
Masonry Screw CSK 4.8 x 70mm (49mm Fixing)
100
SST4882C
Masonry Screw CSK 4.8 x 82mm (57mm Fixing)
100
SST48100C
Masonry Screw CSK 4.8 x 100mm (75mm Fixing)
100
SST48120C
Masonry Screw CSK 4.8 x 120mm (100mm Fixing)
100
SST4870C
FRAME SCREWS CODE
DESCRIPTION
Unit Qty
SC7550
Concrete Screw 7.5 x 50mm
100
SC7570
Concrete Screw 7.5 x 70mm
100
SC7582
Concrete Screw 7.5 x 82mm
100
SC7510
Concrete Screw 7.5 x 100mm
100
SC75112
Concrete Screw 7.5 x 112mm
100
SC7512
Concrete Screw 7.5 x 120mm
100
SC75132
Concrete Screw 7.5 x 132mm
100
SC7515
Concrete Screw 7.5 x 150mm
100
SC7518
Concrete Screw 7.5 x 180mm
100
SC75202
Concrete Screw 7.5 x 200mm
100
SC7550 SC7515
LARGE DIAMETER TAPCON
190
CODE
DESCRIPTION
Unit Qty
TLD1076
Large Diameter Tapcon 10mm x 76mm - 38mm
50
TLD10101
Large Diameter Tapcon 10mm x 101mm - 63mm
50
TLD10128
Large Diameter Tapcon 10mm x 128mm - 90mm
50
TLD1276
Large Diameter Tapcon 12mm x 76mm - 13mm
25
TLD12101
Large Diameter Tapcon 12mm x 101mm - 38mm
25
TLD12127
Large Diameter Tapcon 12mm x 127mm - 64mm
25
TLD12152
Large Diameter Tapcon 12mm x 152mm - 89mm
25
Salisbury 01722 414 011
TLD12101
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS DRILL SCREWS
DRILL SCREWS LIGHT CODE
DESCRIPTION
Unit Qty
SDL5525C
Drill Screws Light Section CSK 5.5 x 25mm
100
SDL5525H
Drill Screws Light Section HEX 5.5 x 25mm
100
SDL5532H
Drill Screws Light Section HEX 5.5 x 32mm
100
SDL5538C
Drill Screws Light Section CSK 5.5 x 38mm
100
SDL5538H
Drill Screws Light Section HEX 5.5 x 38mm
100
SDL5550C
Drill Screws Light Section CSK 5.5 x 50mm
100
SDL5550H
Drill Screws Light Section HEX 5.5 x 50mm
100
SDL5560H
Drill Screws Light Section CSK 5.5 x 60mm
100
SDL5570H
Drill Screws Light Section HEX 5.5 x 70mm
100
SDL5585C
Drill Screws Light Section CSK 5.5 x 85mm
100
SDL55100C
Drill Screws Light Section CSK 5.5 x 100mm
100
DRILL SCREWS HEAVY CODE
DESCRIPTION
Unit Qty
SDH5525H
Drill Screws Heavy Section HEX 5.5 x 25mm
100
SDH5532H
Drill Screws Heavy Section HEX 5.5 x 32mm
100
SDH5538H
Drill Screws Heavy Section HEX 5.5 x 38mm
100
SDHS5538H
Drill Screws Heavy Section HEX St/St 5.5x38mm
100
SDH5540C
Drill Screws Heavy Section CSK 5.5 x 40mm
100
SDH5540H
Drill Screws Heavy Section HEX 5.5 x 40mm
100
SDH5555H
Drill Screws Heavy Section HEX 5.5 x 55mm
100
SDH5560H
Drill Screws Heavy Section HEX 5.5 x 60mm
100
SDH5565C
Drill Screws Heavy Section CSK 5.5 x 65mm
100
SDH5580H
Drill Screws Heavy Section HEX 5.5 x 80mm
100
SDH5585C
Drill Screws Heavy Section CSK 5.5 x 85mm
100
SDH55100C
Drill Screws Heavy Section CSK 5.5 x 100mm
100
SDH55100H
Drill Screws Heavy Section HEX 5.5 x 100mm
100
WR16
Washer with EDPM Elastomer Backing 19mm
100
GASH POINT SCREWS CODE
DESCRIPTION
Unit Qty
SGP25
Gash Point HEX Head Screw & Washer 25mm
100
SGP32
Gash Point HEX Head Screw & Washer 32mm
100
SGP45
Gash Point HEX Head Screw & Washer 45mm
100
SGP60
Gash Point HEX Head Screw & Washer 60mm
100
DRILL SCREW CAPS CODE
DESCRIPTION
Unit Qty
SDC100BL
Drill Screws Cover Cap Black
100
SDC100BR
Drill Screws Cover Cap Brown
100
SDC100GR
Drill Screws Cover Cap Grey
100
SDC100OG
Drill Screws Cover Cap Olive Green
100
SDC100WH
Drill Screws Cover Cap White
100
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
191
SCREWS, BOLTS & FIXINGS STAINLESS STEEL SCREWS & WASHERS
STAINLESS STEEL WOODSCREWS CODE
DESCRIPTION
Unit Qty
WSS3030
St/St Pozi CSK Woodscrew 3.0 X 30mm
1000
WSS4025
St/St Pozi CSK Woodscrew 4.0 X 25mm
1000
WSS4030
St/St Pozi CSK Woodscrew 4.0 X 30mm
1000
WSS4040
St/St Pozi CSK Woodscrew 4.0 x 40mm
1000
WSS4050
St/St Pozi CSK Woodscrew 4.0 x 50mm
1000
WSS4060
St/St Pozi CSK Woodscrew 4.0 x 60mm
1000
WSS4070
St/St Pozi CSK Woodscrew 4.0 x 70mm
1000
WSS4075
St/St Pozi CSK Woodscrew 4.0 X 75mm
1000
WSS5025
St/St Pozi CSK Woodscrew 5.0 X 25mm
1000
WSS5030
St/St Pozi CSK Woodscrew 5.0 x 30mm
1000
WSS5040
St/St Pozi CSK Woodscrew 5.0 x 40mm
1000
WSS5050
St/St Pozi CSK Woodscrew 5.0 x 50mm
1000
WSS5060
St/St Pozi CSK Woodscrew 5.0 x 60mm
1000
WSS5070
St/St Pozi CSK Woodscrew 5.0 x 70mm
1000
WSS5010
St/St Pozi CSK Woodscrew 5.0 x 100mm
1000
STAINLESS STEEL COACHSCREWS CODE
DESCRIPTION
Unit Qty
SCS650
Coachscrews Hex Head St/St 6 X 50mm
100
SCS850
Coachscrews Hex Head St/St 8 X 50mm
100
SCS860
Coachscrews Hex Head St/St 8 X 60mm
100
SCS880
Coachscrews Hex Head St/St 8 X 80mm
100
SCS810
Coachscrews Hex Head St/St 8 X 100mm
100
SCS812
Coachscrews Hex Head St/St 8 X 120mm
100
SCS1050
Coachscrews Hex Head St/St 10 X 50mm
100
SCS1070
Coachscrews Hex Head St/St 10 X 70mm
100
SCS1080
Coachscrews Hex Head St/St 10 X 80mm
100
SCS1010
Coachscrews Hex Head St/St 10 X 100mm
100
SCS1012
Coachscrews Hex Head St/St 10 X 120mm
100
SCS1015
Coachscrews Hex Head St/St 10 X 150mm
100
SCS1280
Coachscrews Hex Head St/St 12 X 80mm
100
SCS1210
Coachscrews Hex Head St/St 12 X 100mm
100
SCS1213
Coachscrews Hex Head St/St 12 X 130mm
100
SCS1215
Coachscrews Hex Head St/St 12 X 150mm
100
ST/ST/ROUND WASHERS CODE
192
DESCRIPTION
Unit Qty
WSFA10
St/St Round Washers M10
100
WSFA12
St/St Round Washers M12
100
WSFA16
St/St Round Washers M16
100
WSFA20
St/St Round Washers M20
100
WSM06
St/St Mudguard Washers M6x25
100
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
SCREWS, BOLTS & FIXINGS THREADED BAR, NUTS & BOLTS
THREADED BAR ST/ST CODE
DESCRIPTION
Unit Qty
BT08S1
Threaded Bar St/St M8x1m
Each
BT08S3
Threaded Bar St/St M8x3m
Each
BT10S1
Threaded Bar St/St M10x1m
Each
BT10S3
Threaded Bar St/St M10x3m
Each
BT12S1
Threaded Bar St/St M12x1m
Each
BT12S3
Threaded Bar St/St M12x3m
Each
BT16S1
Threaded Bar St/St M16x1m
Each
BT16S3
Threaded Bar St/St M16x3m
Each
BT20S1
Threaded Bar St/St M20x1m
Each
BT20S3
Threaded Bar St/St M20x3m
Each
CODE
DESCRIPTION
Unit Qty
NS04
St/St Nuts M4
100
ST/ST NUTS
NS06
St/St Nuts M6
100
NS08
St/St Nuts M8
100
NS10
St/St Nuts M10
100
NS12
St/St Nuts M12
100
NS16
St/St Nuts M16
100
NS20
St/St Nuts M20
100
BOLTS - CUP SQUARE HEX ST/ST CODE
DESCRIPTION
Unit Qty
BCS0850
Bolts - Cup Square Hex St/St M8 X 50mm
100
BCS0865
Bolts - Cup Square Hex St/St M8 X 65mm
100
BCS1075
Bolts - Cup Square Hex St/St M10 X 75mm
100
BCS1010
Bolts - Cup Square Hex St/St M10 X 100mm
100
BCS1013
Bolts - Cup Square Hex St/St M10 X 130mm
100
BCS1210
Bolts - Cup Square Hex St/St M12 X 100mm
100
BCS1213
Bolts - Cup Square Hex St/St M12 X 130mm
100
BCS1250
Bolts - Cup Square Hex St/St M12 X 150mm
100
BCS1217
Bolts - Cup Square Hex St/St M12 X 175mm
100
BOLTS - HEX ROUND HEX ST/ST CODE
DESCRIPTION
Unit Qty
BHS840
Bolts Hex Round Hex St/St M8 X 40mm
100
BHS850
Bolts Hex Round Hex St/St M8 X 50mm
100
BHS1050
Bolts Hex Round Hex St/St M10 X 50mm
100
BHS1010
Bolts Hex Round Hex St/St M10 X 100mm
100
BHS1250
Bolts Hex Round Hex St/St M12 X 50mm
100
BHS1275
Bolts Hex Round Hex St/St M12 X 75mm
100
BHS1210
Bolts Hex Round Hex St/St M12 X 100mm
100
BHS1213
Bolts Hex Round Hex St/St M12 X 130mm
100
BHS1215
Bolts Hex Round Hex St/St M12 X 150mm
100
BHS1218
Bolts Hex Round Hex St/St M12 X 180mm
100
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
193
SCREWS, BOLTS & FIXINGS HORSESHOE & GLAZING PACKERS
HORSESHOE PACKER CODE
DESCRIPTION
Unit Qty
PHL1
Horseshoe Packer Long 1mm (1000)
1000
PHL2
Horseshoe Packer Long 2mm (1000)
1000
PHL3
Horseshoe Packer Long 3mm (1000)
1000
PHL4
Horseshoe Packer Long 4mm (1000)
1000
PHL5
Horseshoe Packer Long 5mm (1000)
1000
PHL6
Horseshoe Packer Long 6mm (1000)
1000
PHS1
Horseshoe Packer Short 1mm (1000)
1000
PHS2
Horseshoe Packer Short 2mm (1000)
1000
PHS3
Horseshoe Packer Short 3mm (1000)
1000
PHS4
Horseshoe Packer Short 4mm (1000)
1000
PHS5
Horseshoe Packer Short 5mm (1000)
1000
PHS6
Horseshoe Packer Short 6mm (1000)
1000
PHS10
Horseshoe Packer Short 10mm (1000)
1000
GLAZING PACKER CODE
DESCRIPTION
Unit Qty
PG241
Glazing Packer 24 X 100 X 1mm
1000
PG242
Glazing Packer 24 X 100 X 2mm
1000
PG243
Glazing Packer 24 X 100 X 3mm
1000
PG244
Glazing Packer 24 X 100 X 4mm
1000
PG245
Glazing Packer 24 X 100 X 5mm
1000
PG246
Glazing Packer 24 X 100 X 6mm
1000
ASSORTED HORSESHOE PACKERS
194
CODE
DESCRIPTION
Unit Qty
PAH
Assorted Packers 101 x 43mm
200
PAF
Assorted Flat Packers - Window Type
100
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
195
INTERIOR FINISHINGS ACCESS PANELS & LOFT DOORS
ACCESS PANELS CODE
DESCRIPTION
Unit Qty
AP1116
Access Panel 110 x 160mm
Each
AP1515
Access Panel 150 x 150mm
Each
AP1523
Access Panel 150 x 230mm
Each
AP2020
Access Panel 200 x 200mm
Each
AP3030
Access Panel 300 x 300mm
Each
AP4646
Access Panel 464 x 464mm
Each
APHFR
AccessPanel 1hr Fire Rated 150x150mm
Each
APHFR
AP1116
AP1523
LOFT DOORS CODE
DESCRIPTION
Unit Qty
DLL5512
Loft Door & Ladder Timber 550 x 1200mm
Each
DLL6012
Loft Door & Ladder Timber 600 x 1200mm
Each
DLD
Loft Door Drop-in 526 x 626mm
Each
DLH
Loft Door Hinged 526 x 626mm
Each
DLHK
Loft Door Hinged with Keylock 526 x 626mm
Each
DLD035
Loft Door Drop-in 0.35 U Value 526 x 626mm
Each
DLH035
Loft Door Hinged 0.35 U Value 526 x 626mm
Each
DLHK035
Loft Door Hinged Keylock 0.35 U Value 526 x 626mm
Each
DLHFR
Steel Loft Door 1 Hour Fire Rated 500 x 705mm
Each
LLS08
Aluminium Loft Ladder 8ft
Each
LLS10
Aluminium Loft Ladder 10ft
Each
DLHFR
1
Timber Loft Access Features:
196
1
Continuous seal around trap door reduces heat loss
2
White 32mm Thick Insulated Trapdoor
3
Dovetail Joints for added durability
4
Slip resistant treads
5
Pre-fitted Handrail as Standard
6
Trap door fully recessed into frame flush with ceiling
7
Fully assembled and easy to install
8
U-value 1.23w/m2K
9
Recessed locking mechanism
2
3 5 4
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS INTUMESCENT PIPE WRAP & VENTILATORS
INTUMESCENT PIPE WRAP 110MM
FIRE PROTECTION COLLAR 55MM
FIRE PROTECTION COLLAR 110MM
CODE: PWI110 DESC: Intumescent Pipe Wrap 110mm UNIT: Each
CODE: PWC55 DESC: Fire Protection Collar 55mm UNIT: Each
CODE: PWC110 DESC: Fire Protection Collar 110mm UNIT: Each
INTUMESCENT PIPE WRAP 160MM
FIRE PROTECTION COLLAR 160MM
CODE: PWI160 DESC: Intumescent Pipe Wrap 160mm UNIT: Each
CODE: PWC160 DESC: Fire Protection Collar 160mm UNIT: Each
INTUMESCENT STRIPS CODE
DESCRIPTION
Unit Qty
IS104FOW
Intumescent Strip 10 x 4mm Fire Only 2.1m - White
Each
IS104FOB
Intumescent Strip 10 x 4mm Fire Only 2.1m - Brown
Each
IS154FOW
Intumescent Strip 15 x 4mm Fire Only 2.1m - White
Each
IS154FOB
Intumescent Strip 15 x 4mm Fire Only 2.1m - Brown
Each
IS204FOW
Intumescent Strip 20 x 4mm Fire Only 2.1m - White
Each
IS204FOB
Intumescent Strip 20 x 4mm Fire Only 2.1m - Brown
Each
IS104FSW
Intumescent Strip 10 x 4mm Fire & Smoke 2.1m - White
Each
IS104FSB
Intumescent Strip 10 x 4mm Fire & Smoke 2.1m - Brown
Each
IS154FSW
Intumescent Strip 15 x 4mm Fire & Smoke 2.1m - White
Each
IS154FSB
Intumescent Strip 15 x 4mm Fire & Smoke 2.1m - Brown
Each
IS204FSW
Intumescent Strip 20 x 4mm Fire & Smoke 2.1m - White
Each
IS204FSB
Intumescent Strip 20 x 4mm Fire & Smoke 2.1m - Brown
Each
IIHL100
Intumescent Hinge Liner 102mm
Each
IS104FOW
IS104FSW
INTERNAL VENTILATORS CODE
DESCRIPTION
Unit Qty
DIRVH93M
Internal Vent Louvre with Flyscreen 9 x 3" White
Each
DIRVH93BR
Internal Vent Louvre with Flyscreen 9 x 3" Brown
Each
DIRVH96M
Internal Vent Louvre with Flyscreen 9 x 6" White
Each
DIRVH96BR
Internal Vent Louvre with Flyscreen 9 x 6" Brown
Each
DIRVH99M
Internal Vent Louvre with Flyscreen 9 x 9" White
Each
DIRVH99BR
Internal Vent Louvre with Flyscreen 9 x 9" Brown
Each
DIHM93
Internal Vent Hit and Miss 9 x 3" White
Each
DIHM96
Internal Vent Hit and Miss 9 x 6" White
Each
DIHM99
Internal Vent Hit and Miss 9 x 9" White
Each
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
197
INTERIOR FINISHINGS 110 x 54mm RECTANGULAR AIR DUCT SYSTEM
RECTANGULAR VENT GRAVITY FLAP 110 x 54mm
RECTANGULAR VENT LOUVRE 110 x 54mm
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIT4RFB
Vent Gravity Flap Rectangular Brown 110 x 54mm
Each
DIT4RLB
Vent Louvre Rectangular Brown 110 x 54mm
Each
DIT4RLW
Vent Louvre Rectangular White 110 x 54mm
Each
DIT4RLT
Vent Louvre Rectangular Terracotta 110 x 54mm
Each
DIT4RFW
Vent Gravity Flap Rectangular White 110 x 54mm
Each
DIT4RFT
Vent Gravity Flap Rectangular Terracotta 110 x 54mm
Each
RECTANGULAR DUCTING 110 x 54mm
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIDS4R3
Flexible Ducting Rectangular 3m 110 x 54mm
Each
DIDS422
Duct Clip Rectangular 110 x 54mm
Each
DIDS420
Duct Connector Rectangular 110 x 54mm
Each
DIDS410
Rigid Ducting Rectangular 1m 110 x 54mm
Each
DIDS415
Rigid Ducting Rectangular 1.5m 110 x 54mm
Each
RECTANGULAR BENDS
198
RECTANGULAR DUCT CLIP AND CONNECTOR
FLAT TO ROUND CONNECTORS
AIRBRICK TO DUCT ADAPTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIDS450
Vertical Bend Rectangular 110 x 54mm
Each
DIDS470
Flat to Round Straight Connector Rectangular 110 x 54mm
Each
DIDS477
Airbrick to Duct Adaptor 110 x 54mm
Each
DIDS460
Horizontal Bend Rectangular 110 x 54mm
Each
DIDS430
90 Deg. Flat to Round Bend Rectangular 110 x 54mm
Each
DIDS480
Tee Connector Rectangular 110 x 54mm
Each
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS 204 x 60mm RECTANGULAR AIR DUCT SYSTEM
RECTANGULAR VENT GRAVITY FLAP 204 x 60mm
RECTANGULAR VENT LOUVRE 204 x 60mm
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIT10RFB
Vent Gravity Flap Rectangular Brown 204 x 60mm
Each
DIT10RLB
Vent Louvre Rectangular Brown 204 x 60mm
Each
DIT10RFW
Vent Gravity Flap Rectangular White 204 x 60mm
Each
DIT10RLW
Vent Louvre Rectangular White 204 x 60mm
Each
DIT10RFT
Vent Gravity Flap Rectangular Terracotta 204 x 60mm
Each
DIT10RLT
Vent Louvre Rectangular Terracotta 204 x 60mm
Each
RECTANGULAR DUCTING 204 x 60mm
RECTANGULAR DUCT CLIP AND CONNECTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIDS10R3
Flexible Ducting Rectangular 3m 204 x 60mm
Each
DIDS1022
Duct Clip Rectangular 204 x 60mm
Each
DIDS1010
Rigid Ducting Rectangular 1m 204 x 60mm
Each
DIDS1020
Duct Connector Rectangular 204 x 60mm
Each
DIDS1015
Rigid Ducting Rectangular 1.5m 204 x 60mm
Each
RECTANGULAR BENDS
FLAT TO ROUND CONNECTORS
CODE
DESCRIPTION
Unit Qty
DIDS1050
90 Deg. Vertical Bend Rectangular 204 x 60mm
Each
DIDS1060
Horizontal Bend Rectangular 204 x 60mm
Each
Portsmouth 023 92 385 656
CODE
DESCRIPTION
Unit Qty
DIDS1070
Flat to Round Straight Connector Rectangular 204 x 60mm
Each
DIDS1030
90 Deg. Flat to Round Bend Rectangular 204 x 60mm
Each
sales@strukta.co.uk
AIRBRICK TO DUCT ADAPTOR
CODE
DESCRIPTION
Unit Qty
DIDS1077
Airbrick to Duct Adaptor 204 x 60mm
Each
DIDS1080
Tee Connector Rectangular 204 x 60mm
Each
www.strukta.co.uk
199
INTERIOR FINISHINGS 100mm ROUND AIR DUCT SYSTEM
ROUND VENT GRAVITY FLAP 100mm
ROUND VENT LOUVRE 100mm
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIT4MFB
Vent Gravity Flap Round Brown 100mm
Each
DIT4MLB
Vent Louvre Round Brown 100mm
Each
DIT4MFW
Vent Gravity Flap Round White 100mm
Each
DIT4MLW
Vent Louvre Round White 100mm
Each
DIT4MFT
Vent Gravity Flap Round Terracotta 100mm
Each
DIT4MLT
Vent Louvre Round Terracotta 100mm
Each
ROUND DUCTING 100mm
ROUND DUCT CLIP AND CONNECTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIFDS4B1
Flexible Ducting Round 1m 100mm
Each
DIEPT435
Rigid Duct Round 350mm 100mm
Each
DIFDS4B2
Flexible Ducting Round 2m 100mm
Each
DIFDS425
Duct Fixing Clip Round 100mm
Each
DIFDS4B6
Flexible Ducting Round 6m 100mm
Each
DIDS493
Duct Connector Round 100mm
Each
ROUND BENDS
AIRBRICK TO DUCT ADAPTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIDS904
Duct 90째 Bend Round 100mm
Each
DIDS644
Duct Adaptor 150-100mm
Each
DIDS426
Wall Cover Plate Round 100mm
Each
Duct Adaptor 125-100mm
Each
Flexi Duct Connector Female Round 100mm
Each
DIDS544 DIDS655
Duct Adaptor 150-125mm
Each
DIDS424
Flexi Duct Connector Male Round 100mm
Each
DIWCP4
200
DUCT ADAPTORS
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS 125mm ROUND AIR DUCT SYSTEM
ROUND VENT GRAVITY FLAP 125mm
ROUND VENT LOUVRE 125mm
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIT5MFB
Vent Gravity Flap Round Brown 125mm
Each
DIT5MLB
Vent Louvre Round Brown 125mm
Each
DIT5MFW
Vent Gravity Flap Round White 125mm
Each
DIT5MLW
Vent Louvre Round White 125mm
Each
DIT5MFT
Vent Gravity Flap Round Terracotta 125mm
Each
DIT5MLT
Vent Louvre Round Terracotta 125mm
Each
ROUND DUCTING 125mm
ROUND DUCT CLIP AND CONNECTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIFDS5B1
Flexible Ducting Round 1m 125mm
Each
DIEPT535
Rigid Duct Round 350mm 125mm
Each
DIFDS5B2
Flexible Ducting Round 2m 125mm
Each
DIFDS525
Duct Fixing Clip Round 125mm
Each
DIFDS5B6
Flexible Ducting Round 6m 125mm
Each
DIDS593
Duct Connector Round 125mm
Each
ROUND BENDS
DUCT ADAPTORS
AIRBRICK TO DUCT ADAPTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIDB905
Duct 90째 Bend Round 125mm
Each
DIDS644
Duct Adaptor 150-100mm
Each
DIDS526
Wall Cover Plate Round 125mm
Each
Duct Adaptor 125-100mm
Each
Flexi Duct Connector Female Round 125mm
Each
DIDS544 DIDS655
Duct Adaptor 150-125mm
Each
DIDS524
Flexi Duct Connector Male Round 125mm
Each
DIWCP5
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
201
INTERIOR FINISHINGS 150mm ROUND AIR DUCT SYSTEM
ROUND VENT GRAVITY FLAP 150mm
ROUND VENT LOUVRE 150mm
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIT6MFB
Vent Gravity Flap Round Brown 150mm
Each
DIT6MLB
Vent Louvre Round Brown 150mm
Each
DIT6MFW
Vent Gravity Flap Round White 150mm
Each
DIT6MLW
Vent Louvre Round White 150mm
Each
DIT6MFT
Vent Gravity Flap Round Terracotta 150mm
Each
DIT6MLT
Vent Louvre Round Terracotta 150mm
Each
ROUND DUCTING 150mm
ROUND DUCT CLIP AND CONNECTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIFDS6B1
Flexible Ducting Round 1m 150mm
Each
DIEPT635
Rigid Duct Round 350mm 150mm
Each
DIFDS6B2
Flexible Ducting Round 2m 150mm
Each
DIFDS625
Duct Fixing Clip Round 150mm
Each
DIFDS6B6
Flexible Ducting Round 6m 150mm
Each
DIDS693
Duct Connector Round 150mm
Each
ROUND BENDS
FLEXI DUCT CONNECTOR
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
CODE
DESCRIPTION
Unit Qty
DIDS906
Duct 90째 Bend Round 150mm
Each
DIDS644
Duct Adaptor 150-100mm
Each
DIDS626
Wall Cover Plate Round 150mm
Each
Duct Adaptor 125-100mm
Each
Flexi Duct Connector Female Round 150mm
Each
DIDS544 DIDS655
Duct Adaptor 150-125mm
Each
DIDS624
Flexi Duct Connector Male Round 150mm
Each
DIWCP6
202
FLAT TO ROUND CONNECTORS
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS CYLINDER LOCKS & COMMERCIAL DOOR FURNITURE
CYLINDERS CODE
DESCRIPTION
Unit Qty
ICYA71145SC
Euro Single Cylinder 45mm - Satin Chrome
Each
ICYA71370SC
Euro Standard Cylinder & Turn 70mm - Satin Chrome Each
ICYA71270SC
Euro Double Cylinder 70mm - Satin Chrome
Each
ICYA71145SC
ICYA71370SC
ICYA1270SC
COMMERCIAL DOOR FURNITURE CODE
DESCRIPTION
Unit Qty
ICSL1190SSS
19mm Safety Lever on Sprung Rose - Satin Stainless Steel
Each
ICSL1192SSS
19mm Mitred Lever on Sprung Rose - Satin Stainless Steel
Each
IFPP1300SSS
Finger Plates 300 x 75mm - Plain - Satin Stainless Steel
Each
IFPP1300BSS
Finger Plates 300 x 75mm - Plain - Bright Stainless Steel
Each
IFPP1301SSS
Finger Plates 300 x 75mm - PULL - Satin Stainless Steel
Each
IFPP1301BSS
Finger Plates 300 x 75mm - PULL - Bright Stainless Steel
Each
IFPP1302SSS
Finger Plates 300 x 75mm - PUSH - Satin Stainless Steel
Each
IFPP1302BSS
Finger Plates 300 x 75mm - PUSH - Bright Stainless Steel
Each
ICSD1150SSS
Pull Handle 19mm - 150mm c/c - Satin Stainless Steel
Each
ICSD1225SSS
Pull Handle 19mm - 225mm c/c - Satin Stainless Steel
Each
ICSD1300SSS
Pull Handle 19mm - 300mm c/c - Satin Stainless Steel
Each
ICSD1450SSS
Pull Handle 19mm - 450mm c/c - Satin Stainless Steel
Each
ICSD1600SSS
Pull Handle 19mm - 600mm c/c - Satin Stainless Steel
Each
ICSP1005SSS
Lock Escutcheon - Satin Stainless Steel
Each
ICST1015SSS
Thumbturn & Release - Satin Stainless Steel
Each
ICSE1005SSS
Euro Profile Escutcheon - Satin Stainless Steel
Each
IAA20SC
Door Stop Floor Mounted (Oval) 32mm - Satin Chrome
Each
IAA20CP
Door Stop Floor Mounted (Oval) 32mm - Polished Chrome
Each
IAA20PB
Door Stop Floor Mounted (Oval) 32mm - Polished Brass
Each
IAA21SC
Door Stop Cylinder c/w (Rose) 64mm - Satin Chrome
Each
IAA21CP
Door Stop Cylinder c/w (Rose) 64mm - Polished Chrome
Each
IAA21PB
Door Stop Cylinder c/w (Rose) 64mm - Polished Brass
Each
IBB76PB
Barrel Bolt 76mm - Polished Brass
Each
IBB76SAA
Barrel Bolt 76mm - Silver Anodised Aluminium
Each
IBB100PB
Barrel Bolt 100mm - Polished Brass
Each
IBB100SAA
Barrel Bolt 100mm - Silver Anodised Aluminium
Each
IBB150SCS
Barrel Bolt 150mm Satin Chrome - Special
Each
IBBN76PB
Necked Barrel Bolt 76mm - Polished Brass
Each
IBBN76SAA
Necked Barrel Bolt 76mm - Silver Anodised Aluminium Each
IFB1520SC
Flush Bolt 150 x 20mm - Satin Chrome
Each
IFB1520CP
Flush Bolt 150 x 20mm - Polished Chrome
Each
IFB1520PB
Flush Bolt 150 x 20mm - Polished Brass
Each
IFB2020SC
Flush Bolt 202 x 20mm - Satin Chrome
Each
IFB2020CP
Flush Bolt 202 x 20mm - Polished Chrome
Each
IFB2020PB
Flush Bolt 202 x 20mm - Polished Brass
Each
IFB2020SSS
Flush Bolt 202 x 20mm - Satin Stainless Steel
Each
IFB2020BSS
Flush Bolt 202 x 20mm - Bright Stainless Steel
Each
IDCF2003SV
Overhead Door Closer Fixed Size 3 - Silver
Each
IDCS2025BCSV
Overhead Door Closer Variable Power Size 2-5 - Silver
Each
IDCT2024BCSV
Overhead Door Closer Adjustable Size 2-4 - Silver
Each
Portsmouth 023 92 385 656
ICSL1192SSS
ICSL1190SSS
ICSD1150SS
IFPP13
sales@strukta.co.uk
ICSP100SSS
ICSE1005SSS
ICST1015SSS IBBR76SAA
IBBN76SAA
IBB1502SCS
IDCF2003SV
www.strukta.co.uk
203
INTERIOR FINISHINGS GATE FURNITURE
TOWER BOLTS CODE
DESCRIPTION
Unit Qty
TBS152Z
Tower Bolt Straight 152mm - Zinc
Each
TBS152B
Tower Bolt Straight 152mm - Black
Each
TBS203Z
Tower Bolt Straight 203mm - Zinc
Each
TBS203B
Tower Bolt Straight 203mm - Black
Each
BRENTON PAD BOLTS 100mm – 200mm CODE
DESCRIPTION
Unit Qty
BPB150Z
Brenton Pad Bolt 150mm - Zinc
Each
BPB150B
Brenton Pad Bolt 150mm - Black
Each
BPB200Z
Brenton Pad Bolt 200mm - Zinc
Each
BPB200B
Brenton Pad Bolt 200mm - Black
Each
HASP & STAPLE 75mm – 152mm CODE
DESCRIPTION
Unit Qty
HS115Z
Hasp & Staple 115mm - Zinc
Each
HS115B
Hasp & Staple 115mm - Black
Each
HS152Z
Hasp & Staple 152mm - Zinc
Each
HS152B
Hasp & Staple 152mm - Black
Each
HSDP
Hasp for Discus Padlock ZP
Each
LOCKS & CHAINS CODE
DESCRIPTION
Unit Qty
ABU6540
40mm Brass Padlock
Each
ABU6550
50mm Brass Padlock
Each
SPB50LS
50mm Long Shank Padlock
Each
SPBC
Combination Padlock
Each
ABU64TI50TC
50mm Titallium Padlock Twin Pack
2 Pk
KTL50
Key Tags
Box 50
KBL
Key Box Large
Each
KRJ
Large Jailer Ring
Each
SC6850
Chain 6 x 850mm
Each
SC81100
Chain 8 x 1100mm
Each
SC101400
Chain 10 x 1400mm
Each
CABIN HOOKS
ICHCB
CODE
DESCRIPTION
Unit Qty
ICHB4
Cast Cabin Hook Black 4”
Each
ICHZ4
Cast Cabin Hook Zinc 4”
Each
ICHB6
Cast Cabin Hook Black 6”
Each
ICHZ6
Cast Cabin Hook Zinc 6”
Each
ICHB8
Cast Cabin Hook Black 8”
Each
ICHZ8
Cast Cabin Hook Zinc 8”
Each
GATE ACCESSORIES
204
IRGCB
CODE
DESCRIPTION
Unit Qty
IAGCBZP
Auto Gate Catch BZP
Each
IRGCB
Ring Gate Catch Black
Each
Salisbury 01722 414 011
IAGCBZP
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS BRACKETS & SHELVING
CORNER PLATES & BRACES CODE
DESCRIPTION
Unit Qty
ICB25
Corner Brace 25mm
Pk 100
ICB50
Corner Brace 50mm
Pk 100
ICB75
Corner Brace 75mm
Pk 100
ICB100
Corner Brace 100mm
Pk 100
17SP40
Stretcher Plates 40mm YZP
Pk 100
IMBW
Modesty Block White
Pk 25
ICB100
TEE HINGE LIGHT CODE
DESCRIPTION
Unit Qty
LTH150Z
Tee Hinge Light 150mm - Zinc
Pair
LTH150B
Tee Hinge Light 150mm - Black
Pair
LTH200Z
Tee Hinge Light 200mm - Zinc
Pair
LTH200B
Tee Hinge Light 200mm - Black
Pair
LTH250Z
Tee Hinge Light 250mm - Zinc
Pair
LTH250B
Tee Hinge Light 250mm - Black
Pair
TEE HINGE MEDIUM CODE
DESCRIPTION
Unit Qty
MTH350Z
Tee Hinge Medium 350mm - Zinc
Pair
MTH350B
Tee Hinge Medium 350mm - Black
Pair
MTH450Z
Tee Hinge Medium 450mm - Zinc
Pair
MTH450B
Tee Hinge Medium 450mm - Black
Pair
MTH600Z
Tee Hinge Medium 600mm - Zinc
Pair
MTH600B
Tee Hinge Medium 600mm - Black
Pair
IBS86W
SHELF BRACKETS CODE
DESCRIPTION
Unit Qty
IBS43W
Shelf Brackets 100 x 75mm
Each
IBS54W
Shelf Brackets 127 x 100mm
Each
IBS65W
Shelf Brackets 152 x 127mm
Each
IBS86W
Shelf Brackets 203 x 152mm
Each
IBS108W
Shelf Brackets 254 x 203mm
Each
IBS1210W
Shelf Brackets 305 x 254mm
Each
IBS65W
STB07
TWIN-SLOT SHELVING SYSTEM CODE
DESCRIPTION
Unit Qty
STB45
Twin-Slot Shelving Bracket 4.5”
Each
STB07
Twin-Slot Shelving Bracket 7”
Each
STB09
Twin-Slot Shelving Bracket 9”
Each
STB105
Twin-Slot Shelving Bracket 10.5”
Each
STB145
Twin-Slot Shelving Bracket 14.5”
Each
STB185
Twin-Slot Shelving Bracket 18.5”
Each
STB24
Twin-Slot Shelving Bracket 24”
Each
STU18
Twin-Slot Shelving Upright 18”
Each
STU63
Twin-Slot Shelving Upright 63”
Each
Twin-Slot Shelving Upright 78”
Each
Twin-Slot Shelving Upright 94”
Each
STB24
STU39
Twin-Slot Shelving Upright 39”
Each
STU78
STU48
Twin-Slot Shelving Upright 48”
Each
STU94
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
205
INTERIOR FINISHINGS LATCHES & HINGES
SOLID DRAWN BRASS BUTT HINGES CODE
DESCRIPTION
Unit Qty
IHBBH50
Solid Drawn Brass Butt Hinge 50mm
Pair
IHBBH75
Solid Drawn Brass Butt Hinge 75mm
Pair
IHBBH100
Solid Drawn Brass Butt Hinge 100mm
Pair
BRASS BUTT HINGES STEEL WASHER CODE
DESCRIPTION
Unit Qty
IHBWS75
Brass Butt Hinge Steel Washer 75mm
Pair
IHBWS100
Brass Butt Hinge Steel Washer 100mm
Pair
IHBWB75
Brass Butt Hinge Brass Phosphate Washer 75mm
Pair
IHBWB100
Brass Butt Hinge Brass Phosphate Washer 100mm
Pair
IHBBB100EB
Brass Butt Hinge Ball Bearing 100mm - Electro Brassed
Pair
DOUBLE STEEL WASHERED BUTT HINGE CODE
DESCRIPTION
Unit Qty
IHSSW75
St/St Washered Hinge 75mm
Pair
IHSSW100
St/St Washered Hinge 100mm
Pair
STAINLESS STEEL BEARING HINGES CODE
DESCRIPTION
Unit Qty
IHSBB75
St/St Ball Bearing Hinge 75mm
Pair
IHSBB100CSSS
St/St Ball Bearing Hinge 100x3mm C13 Contract Satin Stainless Steel
Pair
IHSBB100CPSS
St/St Ball Bearing Hinge 100x3mm C13 Contract Polished Stainless Steel
Pair
TUBULAR LATCHES CODE
DESCRIPTION
Unit Qty
ITLE8025EB
Tubular Latch 64mm Contract Electro Brassed
Each
ITLE8025NP
Tubular Latch 64mm Contract Nickel Plated
Each
ITLE8030EB
Tubular Latch 76mm Contract Electro Brassed
Each
ITLE8030NP
Tubular Latch 76mm Contract Nickel Plated
Each
ITLS5025EBSSS
Tubular Latch 64mm Heavy Sprung Electro Brass / Satin Stainless Steel
Each
ITLS5030BSSSSS
Tubular Latch 76mm Heavy Sprung Bright Stainless Steel / Satin Stainless Steel
Each
ITLS5030EBSSS
Tubular Latch 76mm Heavy Sprung Electro Brass/ Satin Stainless Steel
Each
ITLS5040EBSSS
Tubular Latch 102mm Heavy Sprung Bright Stainless Steel / Satin Stainless Steel
Each
ITLD5030EBSS
Tubular Dead Bolt 76mm Electro Brass / Satin Stainless Steel
Each
ITLE8025NP
ITLS5030BSS/SSS
ITLD5030EB/SSS
206
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS LOCKS, DOOR HANDLES & BATHROOM TURNS
SASHLOCKS
ILSE5530EB
CODE
DESCRIPTION
Unit Qty
ILSE5325EB
Sashlock 3 Lever 64mm - Electro Brassed
Each
ILSE5325NP
Sashlock 3 Lever 64mm - Nickel Plated
Each
ILSE5330EB
Sashlock 3 Lever 76mm - Electro Brassed
Each
ILSE5330NP
Sashlock 3 Lever 76mm - Nickel Plated
Each
ESCUTCHEONS & BATHROOM TURNS CODE
DESCRIPTION
Unit Qty
ISZC004CP
Serozzetta Turn & Release C Polished Chrome
Each
ISZM004CP
Serozzetta Turn & Release M Polished Chrome
Each
ISZC004SC
Serozzetta Turn & Release C Satin Chrome
Each
ISZM004SC
Serozzetta Turn & Release M Satin Chrome
Each
ISZC004PB
Serozzetta Turn & Release C Polished Brass
Each
ISZM004PB
Serozzetta Turn & Release M Polished Brass
Each
ISZC003SC
Escutcheon Serozzetta Std Profile C Satin Chrome
Each
ISZM003SC
Escutcheon Serozzetta Std Profile M Satin Chrome
Each
ILSE5330NP
SEROZZETTA TURN & RELEASE
ESCUTCHEON STANDARD
ESCUTCHEON EURO PROFILE
DOOR HANDLES CODE
DESCRIPTION
Unit Qty
IM30CP
VICTORIAN - Lock Polished Chrome
Each
IM30WCCP
VICTORIAN - Bathroom Polished Chrome
Each
IM31CP
VICTORIAN - Latch Polished Chrome
Each
ISZC011SC
UNO - Lock Satin Chrome
Each
ISZC013SC
UNO - Bathroom Satin Chrome
Each
ISZC012SC
UNO - Latch Satin Chrome
Each
ISZC031SC
TRES - Lock Satin Chrome
Each
ISZC033SC
TRES - Bathroom Satin Chrome
Each
ISZC032SC
TRES - Latch Satin Chrome
Each
UNO VICTORIAN
DOOR HANDLES - PRESS ON ROSE CODE
DESCRIPTION
Unit Qty
ISZC010CP
UNO Polished Chrome
Each
ISZC040CP
CUATRO Polished Chrome
Each
ISZC010SC
UNO Satin Chrome
Each
ISZC040SC
CUATRO Satin Chrome
Each
TRES
UNO
CUATRO
DOOR HANDLES - SCREW ON ROSE CODE
DESCRIPTION
Unit Qty
ISZM380CP
DESIGN Polished Chrome
Each
ISZS070CP
GRIS Polished Chrome
Each
ISZM380SC
DESIGN Satin Chrome
Each
ISZS070SC
GRIS Satin Chrome
Each
DESIGN
GRIS
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
207
INTERIOR FINISHINGS SURFACE PROTECTION & TEMPORARY DOWNPIPE
Glass Protection
SURFACE PROTECTION CODE
DESCRIPTION
Unit Qty
PWP6010
Window Protector 600mm x 100m
Roll
PCP6010
Carpet Protector 600mm x 100m
Roll
PHFP6050
Hard Floor Saver 600mm x 50m
Roll
PCF1050
Floor Protection Cardboard 1000mm x 50m
Roll
PBP1010
Building Paper 1000mm x 100m
Roll
PCC1075
Corrugated Card 1000mm x 75m
Roll
PBW0710S
Bubblewrap 750mm x 100m Small Bubble
Roll
PBW1210L
Bubblewrap 1200mm x 50m Large Bubble
Roll
PBW1210S
Bubblewrap 1200mm x 100m Small Bubble
Roll
A low tack self-adhesive film for easy use on smooth surfaces including glass and worktops.
Carpet protector A self-adhesive protection for carpets and laminates. Designed to protect from dust, spillages and foot traffic. Laid in seconds leaving no residue when taken up.
PROTECTIVE SHEETING CODE
DESCRIPTION
Unit Qty
PDS3624
Dust Sheets Cotton Twill 3.6 x 2.4m
Each
PDS0973
Dust Sheets Cotton Twill 0.9 x 7.3m (Stairs)
Each
PDS3624PB
Dust Sheets Cotton Twill Plastic Backed
Each
PSL425050
Clear Builders Polythene TPS 4 x 25m 66mu
Roll
PSM425125
Clear Builders Polythene TPS 4 x 25m 125mu
Roll
PSH425200
Clear Builders Polythene TPS 4 x 25m 200mu
Roll
ND250B
Debris Netting 2 x 50m - Blue
Roll
ND250G
Debris Netting 2 x 50m - Green
Roll
Protective Sheeting
• Traditional dust sheets - best
quality soft cotton sheets for protecting floors and furniture during building and decorating.
• Builders polythene - damp proofing and covering up polythene for protection against water damage.
• Tarpaulins - waterproof protection.
Tough woven, tear proof sheeting for water tight protection complete with eyelets to secure with.
• Rope - Heavy duty, tough, multi purpose polypropylene. • Debris netting - dust and debris protection. For increased safety on scaffolding and walk ways especially close to the public highways.
208
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INTERIOR FINISHINGS SURFACE & DOOR PROTECTION
SURFACE PROTECTION CODE
DESCRIPTION
Unit Qty
PPB24122
Protex Board 2.4 x 1.2m x 2mm Black
Sheet
PB24122TR
Protex Board 2.4 x 1.2m x 2mm Translucent
Sheet
PPB24123FR
Protex Board 2.4 x 1.2m x 3mm Flame Retardent
Sheet
Protex board An impact resistant floor protection. Fluted polypropylene board which is extremely versatile. Simple and fast to cut, form and crease to protect all floors.
DOOR PROTECTION CODE
DESCRIPTION
Unit Qty
PSD2090
Door Sleeve 2070mm x 895mm x 20m
Roll
PDE2010
Door Protector 2000mm x 45/60mm
Each
PDJ2010
Door Jamb Protector 2000mm x 100/125mm
Each
PEC2050
Cardboard Edge Protection 2000 x 50 x 50mm
Length
Door Protection
• Door sleeve - finished door protection.
Flame retardant door sleeve providing instant protection against scratches, dust, paint and mortar splashes.
• Door jamb protector - finished jamb protection.
Self-gripping U-profile foam, ideal for door edges, jambs and handrails.
• Cardboard edge protection - a heavy duty
corner protector for economical protection to all exposed edges.
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
209
INTERIOR FINISHINGS ADHESIVE TAPES & DISPENSORS
TAPES CODE
DESCRIPTION
Unit Qty
TAPC5050
Grey All Purpose Cloth Tape 50mm x 50m
Roll
TAPC5075
Grey All Purpose Cloth Tape 75mm x 50m
Roll
TAPCB5050
Black All Purpose Cloth Tape 50mm x 50m
Roll
TLT2510
Low Tack Masking Tape 25mm x 100m
Roll
TLT5010
Low Tack Masking Tape 50mm x 100m
Roll
TDSH50
High Strength Double Sided Tape 50mm
Roll
THBY5033
Black and Yellow Hazard Tape 50mm x 33m
Roll
THRW5033
Red and White Hazard Tape 50mm x 33m
Roll
TM2550
Masking Tape 25mm x 50m
Roll
TM3850
Masking Tape 38mm x 50m
Roll
TM5050
Masking Tape 50mm x 50m
Roll
TM7550
Masking Tape 75mm x 50m
Roll
TCV5066
Plain Vinyl Tape 50mm x 66m
Roll
TD50
Dispenser for all 50mm Tapes
Each
TF50
Foil Tape 50mm x 45m
Roll
TF100
Foil Tape 100mm x 45m
TD50
TCV5066
Roll TAPCB5050
TLT2510
TLT5010
THRW5033 TF50
THBY5033 TF100
TEMPORARY DOWNPIPE CODE
DESCRIPTION
Unit Qty
PDT125
Temporary Downpipe 125mm x 165m
Roll
PDT300
Temporary Downpipe 300mm x 187m
Roll
GBTHJC
Jubilee Clip - Large
Each
Temporary Downpipe
• Temporary rainwater pipe for
preventing water damage to new brickwork and rendering on incomplete guttering.
TAPC5050
• Use jubilee clips or cable ties to secure to outlet.
TAPC5075 GBTHJC
210
Salisbury 01722 414 011
PDT125
sales@strukta.co.uk
www.strukta.co.uk
NOTES
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
211
NOTES
212
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
NOTES
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
213
NOTES
214
Salisbury 01722 414 011
sales@strukta.co.uk
www.strukta.co.uk
INDEX A Above Ground Double Socket Bends......134 Above Ground Drainage Branches..........134, 135 Above Ground Drainage Couplers..........134 Above Ground Drainage Pipe...................134 Above Ground Single Socket Bends.........134 Access Panels................................................196 Accident Book...............................................152 Acoustic Sealant...........................................43 Adhesives........................................................45 Air Admittance Valves.................................135 Air Ducting......................................................197 Air Horn............................................................150 Airbricks - Clay................................................24 Airbricks - Plastic.............................................24 All Purpose Tape............................................209 Aluminium Nails..............................................93 Angle Bead....................................................138 Angle Brackets...............................................78 Angles - PVC..................................................120 Anti-Draught Vents........................................25 Arbors...............................................................173 Arch Boards....................................................69 Arch Formers..................................................144 Architectural Ironmongery..........................207 Architrave - PVC............................................121 Architrave Bead............................................139 Auger Bits........................................................172 B Ballistic Nails....................................................91 Barrier Fence..................................................150 Baseline 8 Tanking Membrane Kit..............21 Bell Beads........................................................139 Bends - Above Ground................................134 Bends - Underground...................................6 Bit Holders........................................................178 Bleach..............................................................166 Blue Grit Plaster Bonding..............................41 Bluebird Ties....................................................34 Bolts – Cup Square Hex................................186 Bolts – Hex Round Hex..................................187 Boss Pipe - Above Ground..........................135 Box Lintels........................................................57, 66 Brackets - Angle............................................78 Branches - Above Ground..........................134 Branches - Underground.............................7 Brass Hinge......................................................206 Breathable Roofing Felts..............................96 Breather Paper...............................................97 Brenton Pad Bolt............................................204 Brick Acid Cleaner........................................41 Brick Reinforcement......................................30 Bricklayers Profiles..........................................153 Bright Nails.......................................................82 Broom..............................................................165 Bubble Wrap..................................................208 Bucket..............................................................162, 166 Buffalo Resins..................................................44 Builders Gloves...............................................146 Build in Hangers.............................................75 Building Paper................................................208 Bulbs.................................................................154 Butt Hinge........................................................206 C Cable Ties.......................................................98 Cam Plates.....................................................79 Carpet Protector...........................................208 Cast Style Guttering......................................128 Cavity Closer..................................................27 Cavity Lintels...................................................52 Cavity Sleeves - Clay....................................24 Cavity Sleeves - Plastic.................................24 Cavity Stop Sock FLAMSTOP.......................28
Cavity Trays - Horizontal...............................27 Cavity Trays - Stepped.................................25 Cementitious Grout......................................34 Centre Pivot Roof Windows........................109 Chain...............................................................165 Chamber Bases.............................................9 Chemical Resin Systems..............................44 Chimney Flue Liners......................................106 Chisel Bits.........................................................174 Circular Saw Blades......................................176 Cladding.........................................................119 Claw Hammer...............................................157 Cleaning Equipment....................................166 Coach Bolts....................................................186 Coachscrews.................................................188 Coachscrews - st/st.......................................192 Collated Drywall Screws..............................143 Combination Flashing Systems...................112 Commercial Door Furniture.........................203 Compriband..................................................29 Concrete Frame Screws..............................190 Concrete Hardener......................................41 Concrete Lintels.............................................48 Concrete Padstones....................................49 Conservation Roof Windows......................113 Contact Adhesives.......................................45 Continuous Soffit Vents................................105 Copper Nails..................................................93 Core Drill Bits...................................................177 Corner Brace..................................................205 Correx Board..................................................209 Cottage Style Vents......................................105 Couplers - Above Ground..........................134 Couplers - Underground..............................6 Cover Board...................................................118 Cowls...............................................................136 Cutting Discs...................................................176 Cylinder Locks................................................203 D Damcor...........................................................29 Damp Proof Membrane..............................18 De-Bonding Sleeves......................................33 Debris Netting.................................................98 Decking Products..........................................80 Decking Screws.............................................80 Diamond Blades............................................177 Diamond Tile Drilling System........................174 Door Closers...................................................203 Door Handles - Lever on Backplate..........207 Door Handles - Press on Rose.....................207 Door Handles - Screw on Rose...................207 Door Jamb Protector...................................209 Door Protection.............................................209 Door Sleeve....................................................209 Double Triangle Ties......................................32 Downpipe.......................................................123 DPC - Polythene............................................19 DPC - Zedex CPT...........................................19 DPC - Zedex Housing....................................19 DPM..................................................................18 Drain Plugs......................................................8 Drainage Channel - Cast Iron....................13 Drainage Channels - Polymer Concrete.13 Drainage Channels - Polypropylene........12 Drainage Crates............................................16 Drainage Lubricants.....................................13 Drill Bits..............................................................169 Drill Screws.......................................................191 Dry Core Drill Bits............................................177 DryFix Foam....................................................45 Drywall Angle Bead......................................138 Drywall Screws...............................................142
Portsmouth 023 92 385 656
sales@strukta.co.uk
Drywall Stop Bead.........................................139 Ducting............................................................197 Ducting - Twinwall.........................................13 Dustbin.............................................................166 Dust Masks......................................................147 Dust Sheets.....................................................209 Dustpan & Brush............................................165 E Ear Defenders................................................147 Eaves Lintels....................................................56 Eaves Vent Roll..............................................105 Electric Duct - Polythene.............................14 Electric Operation Roof Windows..............114 Escutcheons & Bathroom Turns..................207 Evercryl Roof Waterproofer.........................41 Expanded Metal Lathing.............................141 Expanding Foams.........................................45 Expanding Grout...........................................41 Expansion Joint..............................................29 Extension Leads.............................................154 Eye Wash.........................................................152 F Fascia...............................................................118 Fascia Joints & Corners................................119 Feature Bead.................................................139 Felt....................................................................96 Fencing............................................................80 Festoon Lighting.............................................154 Fibre Mesh.......................................................143 Fibre Tape.......................................................143 Finger Plates...................................................203 Fire Collars.......................................................197 Fire Escape Roof Windows..........................110 Fire Rated Foam............................................45 Fire Rated Loft Door......................................196 Fire Sealant.....................................................43 First Aid Kit........................................................152 First Fix Nails.....................................................87 Fixing Band......................................................78 Flamstop..........................................................28 Flashband.......................................................100 Flashing Kits.....................................................111 Flat Bits.............................................................173 Flat Board........................................................118 Flat Packers.....................................................194 Flat Roof Apex System..................................114 Flat Roof System............................................113 Flexi Bead........................................................140 Flexible Adaptors - Underground...............7 Flexible Additive.............................................41 Flexible Ducting.............................................202 Flexible SunPipe Kits.......................................116 Floor Scraper..................................................158 Flue Block........................................................106 Flyscreens........................................................105 Foil Tape..........................................................97 Forever White.................................................42 Fork...................................................................156 Frame Fixings..................................................189 Frame Ties – Safety End................................33 Framing Anchors...........................................189 Fridge...............................................................168 Frost Proofer....................................................40 G Galv. Beads....................................................138 Galv. Mesh Reinforcing................................141 Galvanised Nails............................................83 Gas Barrier System.........................................20 Gate Furniture................................................204 Geofix Paving Compound..........................44 Geotextile Membrane.................................16
www.strukta.co.uk
215
INDEX Girder Truss Shoes..........................................77 Glass Protector...............................................208 Gloves..............................................................146 Glue..................................................................45 Goggles...........................................................146 Gorilla Tub.......................................................166 Grey Tape.......................................................210 Grouts..............................................................41 Gullies - Underground...................................9 Guns - Paslode...............................................88 Guttering.........................................................122 H Hacksaw.........................................................158 Half Round Guttering...................................122 Hall Clips..........................................................101 Hammer..........................................................157 Hammer Fixings..............................................188 Hand Cleaner................................................166 Hand Towel.....................................................167 Hangers...........................................................75 Hard hat..........................................................147 Hasp & Staple................................................204 Headlok Screws.............................................182 Heater..............................................................168 Heavy Duty Lintels.........................................52 Heavy Straps..................................................74 Helical Bar.......................................................34 Helical Batten Fixings....................................92 Herringbone Joist Struts................................79 Hessian.............................................................29 Hex Bolts..........................................................187 Hex Sets...........................................................186 High Capacity Guttering.............................127 High Modulus Silicone...................................42 High Wind Ties................................................78 Hinges..............................................................206 Hip Irons...........................................................99 Hit & Miss Vent................................................197 Hi-Therm Lintels...............................................59 Hi-Vis.................................................................149 Hole Saws........................................................173 Hollow Soffit....................................................119 Hoppers - Drainage......................................9 Horseshoe Packers........................................194 Hose Pipe........................................................162 HSS Drill Bits......................................................170 I Insulated Vertical D.P.C...............................29 Insulation Retaining Discs.............................33 Integral Blind Roof Windows.......................109 Integral Waterproofer...................................40 Internal Ducting.............................................198 Internal Lintels ................................................57 Internal Ventilators.........................................198 Intumescent Pipe Wrap...............................197 Intumescent Strip...........................................197 J Jiffy Hangers...................................................76 Jigsaw Blades.................................................175 Joint Filler Foam.............................................29 Joist Caps........................................................31 Joist Caps........................................................76 K Kettle................................................................168 Key Box............................................................165 Knife..................................................................157 L Ladder.............................................................162 Ladder Brick Reinforcing..............................30 Latex Gloves...................................................146
216
Lead.................................................................102 Lead Free Flashing........................................100 Lead Sealant..................................................42 Lead Slates.....................................................101 Leaded Cavity Trays.....................................26 Ledgerlok........................................................182 Level.................................................................156 Light Straps......................................................74 Lights................................................................154 Lintels................................................................52 Liquid Bitumen................................................18 Loft Doors........................................................196 Loft Ladder.....................................................196 Long Leg Hangers.........................................76 Loose Drywall Screws....................................142 Low Modulus Silicone...................................42, 136 Low Tack Tape...............................................210 M Manhole Covers............................................12 Masking Tape.................................................210 Masonry Drill Bits.............................................170 Masonry Joist Hangers..................................75 Masonry Nails.................................................92 Masonry Repair..............................................34 Masonry Support Systems............................38 Max / Min Thermometer..............................150 Maxi Joist Hangers........................................77 MDPE Pipe - Water........................................15 MDPE Pipe Fittings.........................................14 Metal Lath Fixings..........................................141 Metal Lathing.................................................141 Meter Boxes....................................................31 Microwave......................................................168 Milled Lead.....................................................102 Mini Roller........................................................163 Mitre Fast.........................................................45 Mono Truss Shoes...........................................77 Mop..................................................................165 Mopstick..........................................................101 Mortar Additives............................................40 Mortar Dye......................................................40 Mortar Plasticisers..........................................40 Mortar Rake Blade........................................177 Movement Ties...............................................33 Movement Wall Starter Kit...........................30 Multi-Construction Drill Bits...........................170 Multi-Purpose Silicone...................................42 Multi-Steel Diamond Blade..........................177 Multi-Tool Smart..............................................159 N NailFire Gun Nails...........................................87 Nails..................................................................82 Netlon Barrier..................................................98 Non Ferrous Nails...........................................93 Non Shrinking Grout......................................41 Nuts...................................................................184 Nylon Fixings...................................................141 O Ogee Guttering.............................................126 Orange Barrier Fence...................................150 Optimaxx Screws...........................................183 Optimix............................................................40 Over Fascia Vents.........................................105 Overshoes.......................................................149 P Packers............................................................194 Padlock...........................................................165 Padstones.......................................................49 Paint Brush.......................................................163 Paint Roller......................................................163 Painters Caulk................................................42 Painting & Decorating Equipment............163
Salisbury 01722 414 011
Party Wall Fire & Acoustic Barrier...............28 Paslode Accessories.....................................90 Paslode Gun Nails.........................................88 Path & Patio Sealer.......................................41 Patination Oil..................................................101 Periscope Vents.............................................24 Pipe - Above Ground...................................134 Pipe - Underground......................................6 Plaster Arch Formers.....................................144 Plaster Stop Bead..........................................138 Plasterboard Edging Bead..........................139 Plasterboard Fixings......................................181 Plasterers Bucket............................................162 Plasters.............................................................152 Plastic Arch Boards.......................................69 Plastic Beads..................................................140 Plastic Plugs.....................................................181 Plasticisers........................................................40 Polysulphide Joint Sealants.........................43 Polythene - Clear TPS....................................18 Polythene DPC...............................................19 Portable Lights................................................154 Positive Placement Gun Nails.....................89 Post Anchor....................................................80 Post Base.........................................................80 PPE Equipment...............................................146 Premium Woodscrews.................................183 Pre-Pack Nails.................................................86 Profile Accessories.........................................153 Protection Board...........................................209 Protection Products......................................208 Protective Sheeting.......................................18 Protex Board...................................................209 PU Adhesive...................................................45 PU Gloves........................................................146 PVA Glue.........................................................45 PVC Fascia ....................................................118 PVC-U Angle Bead.......................................140 PVC-U Bellcast................................................140 PVC-U Drywall Bead.....................................140 PVC-U Movement Bead..............................140 PVC-U Stop Bead..........................................140 Q Quadrants - PVC...........................................121 R Rafter Brackets...............................................132 Rainwater Harvesting...................................22 Rake.................................................................156 Rapid Set Cement........................................41 Reciprocating Saw Blades..........................175 Reinforcement...............................................17 Remedial Ties.................................................34 Render Stop Bead........................................139 Resins................................................................44 Retaining Clips...............................................33 Return Hangers..............................................76 Rib Lath............................................................141 Ridge Windows..............................................114 Rigid Cavity Closer........................................27 Rise & Fall Bracket.........................................132 Road Pins........................................................150 Roofing Felt.....................................................96 Roof Window..................................................109 Rooflights.........................................................109 Rope................................................................150 Round Downpipe..........................................123 Router Bits........................................................174 Rubble Sacks..................................................166 S Safety Footwear............................................148 Safety Helmet.................................................147 Safety Specs...................................................146
sales@strukta.co.uk
www.strukta.co.uk
INDEX Sandpaper.....................................................163 Saws.................................................................157 SBR....................................................................40 Schtuk..............................................................43 Screw Caps....................................................181 Screw Cups.....................................................181 Screw In Frame Ties.......................................34 Screwdriver Bit Set.........................................178 Screwdriver Bits..............................................178 Screwdriver Bits - Grey Phosphate.............178 Screwdriver Bits - Titanium............................178 Screws - Optimaxx........................................183 Screws - Tiger..................................................180 Scrim.................................................................143 SDS Plus Chisel Bits.........................................174 SDS Plus Hammer Drill Bits.............................169 Sealant Gun...................................................42 Sealants...........................................................42 Sealing Joint Foam........................................29 Second Fix Brads...........................................87 Self Levelling Compound............................41 Sheradised Nails.............................................85 Shield Anchors...............................................189 Shovel..............................................................156 Signs..................................................................151 Silicone Spray.................................................44, 136 Silicones...........................................................42 Single Leaf Lintels...........................................58 Site Electrics....................................................154 Site Equipment...............................................156 Site Fencing....................................................150 Skirting - PVC..................................................121 Slate Vents......................................................105 Sledge Hammer............................................157 Sleeve Anchors..............................................189 Soak Away Crates........................................16 Soakers............................................................99 Soffit..................................................................118 Soffit Vent Mesh.............................................105 Soffit Vents......................................................105 Sole Plate Anchors........................................78 Solid Wall Lintels.............................................57 Solvent Adaptors...........................................135 Special Lintels.................................................67 Splice Plates....................................................78 Splitter Box.......................................................154 Spray Paint......................................................150 Square Downpipe.........................................125 Square Guttering...........................................124 Square Plate Washers...................................185 Square Twist Nails...........................................77 Square Twist Nails...........................................85 St/St Beads......................................................138 St/St Mesh Reinforcing..................................141 St/St Nails.........................................................93 St/St Woodscrews..........................................192 Stainless Steel Nails........................................93 Standard Angle Bead..................................138 Standard Diamond Blade...........................177 Staplers............................................................97 Steel Fabrication............................................70 Steel Lintels......................................................52 Step-Up............................................................162 Stop Beads......................................................138 Stop Socks.......................................................28 Strike Release Oil............................................41 StrongGrip.......................................................43 Structural Timber Screws..............................182 Studs with Nut and Washer.........................184 Sun Lounge Lintels.........................................67 SunPipe Systems............................................116 Surface Protection........................................209 T Tanking Membrane......................................18
Tanking Membrane - Baseline....................21 Tape Dispenser..............................................210 Tape Measure................................................156 Tapes................................................................210 Tarpaulins........................................................97 Tasklight...........................................................154 Telescopic Vents...........................................24 Temporary Downpipe..................................210 Temporary Protection...................................208 Thermal Gloves..............................................146 Thermometer..................................................150 Thin Coat Beads............................................138 Threaded Bar - BZP........................................184 Threaded Bar - St/St......................................193 Through Bolts..................................................190 Tiger Screws....................................................180 Tile Adhesive...................................................41 Tile Drill Bits.......................................................174 Tile Vents..........................................................104 Timber Connectors.......................................185 Timber Frame Lintels......................................58 Timber Frame Wall Ties.................................33 Timber Loft Access........................................196 Timberlok.........................................................182 Toaster.............................................................168 Toilet Cleaner.................................................166 Toilet Roll..........................................................167 Tools..................................................................160 Top Hung Roof Windows.............................110 Transformer.....................................................154 Trims..................................................................120 Tripod Lights....................................................154 Truss Clips.........................................................77 Tunnel Weep Vents.......................................25 Twinwall Ducting............................................13 Twistfix...............................................................96 Tychon Wall Connectors.............................30 Tying Wire........................................................17 Tying Wire........................................................79 U Ubiflex..............................................................100 Undercloak.....................................................99 Underfloor Vents............................................24 Underground Chambers.............................9 Underground Double Socket Bends.........6 Underground Drainage Adaptors.............7 Underground Drainage Branches.............7 Underground Drainage Couplers..............6 Underground Drainage Gullies..................9 Underground Drainage Hoppers...............9 Underground Drainage Pipe......................6 Underground Single Socket Bends............6 Underground Warning Tape.......................14 Underlay Support Trays.................................99 Uni-Plain Tile Vents.........................................104 Universal Tile Vents........................................104
Weep Vents....................................................25 Wheelbarrow.................................................158 White Finish Roof Window...........................109 Windpost Systems..........................................37 Wipes...............................................................167 Wire Balloon....................................................99 Woodscrews - Optimaxx.............................183 Woodscrews - Stainless Steel......................192 Woodscrews - Tiger.......................................180 Z Zedex...............................................................19
Call into
your nearest
TRADE STORE
and have a coffee
on the house!
Bean to Cup
V Vacuum Cleaner..........................................164 Valley Troughs................................................98 Vapour Barrier................................................18 Vented Soffit...................................................119 W Wall Connectors............................................30 Wall Ties – Timber Frame..............................33 Wall Ties – Type 1...........................................32 Wall Ties – Type 2...........................................32 Wall Ties – Type 4...........................................32 Washers...........................................................185 Waste Adaptor..............................................135 Waste Inlet Manifold - Above Ground.....135 Water Pipe......................................................15 Waterseal Brick Sealer..................................41
Portsmouth 023 92 385 656
sales@strukta.co.uk
www.strukta.co.uk
217
TERMS & CONDITIONS CONDITIONS OF SALE – STRUKTA Group Limited
3) PAYMENT a) Unless terms are agreed otherwise all sums become due and payable under these Conditions not later than [30] days from the [end] of the invoice [month].
1) INTERPRETATION In these Conditions:
b) There shall be no payment, for the purposes of these conditions until any cheque has been cleared.
a) ‘the Company’ means STRUKTA Group Limited (the Company) or any subsidiary company
c) Time for payment shall be of the essence.
or agent authorised by them and ‘the Purchaser’ means the person or persons, firm or company
(d) The Company reserves the right to charge interest at the rate of 3% above the base rate from time to time of Lloyds TSB on all overdue accounts such interest being deemed to accrue on a day to day basis of the due date of payment under paragraph (a) of this Condition.
purchasing from or doing business with the Company. b) ‘the Contract’ means the contract to supply Goods to the Purchaser as evidenced by any order made by the Purchaser and accepted by the Company and subject to these conditions
e) The Purchaser shall have no right of set off statutory or otherwise.
of sale.
f) If the Purchaser (being a company) has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purposes of a bona fide amalgamation or reconstruction or compounds with its creditors or commits a material or serious breach of this Agreement (and in the case of such a breach being remediable fails to remedy it within 7 days of receiving notice to do so) it will be deemed to have repudiated the Contract.
c) ‘the Goods’ means all products supplied by the Company to the Purchaser whether by means of sale, hire, rental or otherwise and whether the property of the Company is distributed by the Company as agents for another. 2) GENERAL a) These Conditions of Sale should be read in conjunction with any Special Conditions included in the Company’s quotations. b) The Company reserves the right to accept or refuse any order given on the basis of its quotation and in the event of the refusal of any order no damages or expenses of any kind shall be payable by the Company. c) The Company shall in no event be liable for any inaccuracy or misdescription of the Goods or for any loss or damage either direct or consequential flowing there from or from any other cause whatsoever including any defect whatsoever in the Goods notwithstanding any written or oral representations warranty or conditions which the Company or their representative or agent may have made or given prior to or in the course of making or purporting to be part of the agreement for sale from which are also excluded all implied warranties or conditions. The Company shall in no event be liable for fundamental breach of the agreement for sale. d) In purchasing Goods from the Company on these Conditions the Purchaser is deemed to acknowledge that they do not rely upon the skill or judgement of the Company or its employees as agents as to matters connected with the Goods. e) The Purchaser shall be responsible for providing any guard or protection necessary to comply with any statutory requirements in connection with the operation of machinery. f) Any complaints about the goods supplied shall only be entertained by the Company if made within three days of delivery. (g) Credit will only be given for Goods returned within 1 month of supply, if Delivery Note number is quoted and the Company has issued a Collection Note for the Goods that are re-saleable. (h) When Goods are returned to the Company’s stock for credit the Company reserves the right to deduct 25% from the original cost of the Goods, except where Goods are returned and exchanged at the same point in time for alternative goods, then 7.5% of the original cost will be deducted. i) All samples will be charged at the current rate and are non-returnable. Cancellation of special or purpose made orders cannot be accepted after the Goods have been manufactured by the Company’s supplier. j) The Purchaser shall ensure that the terms of its order are complete and accurate. k) These conditions shall be deemed to be incorporated into any contract (Contract) arising from the quotation to which this relates, to the exclusion of any other terms that the Purchaser seeks to impose or incorporate, or which are implied by trade, custom, practice or course of dealing and no stipulation or condition which would conflict with or in any way vary, qualify or negate any of these conditions (including the introduction of any additional terms and conditions) shall be binding upon the Company unless expressly agreed by the Company in writing. l) The Company’s quotation is subject to a condition that it must be accepted in its entirely in writing within 30 days otherwise it shall not remain valid after that date. m) If the Company’s performance of any of its obligations under the Contract is prevented or delayed by any act or omission by the Purchaser or failure by the Purchaser to perform any relevant obligation (Purchaser Default): i) The Company shall without limiting its other rights or remedies have the right to suspend performance of its obligations until the Purchaser remedies the Purchaser Default, and to rely on the Purchaser Default to relieve the Company from the performance of any of its obligations to the extent that the Purchaser Default prevents or delays the Company’s performance of any of its obligations; ii) The Company shall not be liable for any costs or losses sustained or incurred by the Purchaser arising directly or indirectly from the Company’s failure or delay to perform any of its obligations as set out in this clause; and iii) The Purchaser shall reimburse the Company on written demand for any costs or losses sustained or incurred by the Company arising directly or indirectly from the Purchaser Default. n) The Company shall not be liable to the Purchaser for delays or for the non-execution of the Contract either in whole or in part, caused by war, frost, floods, storms, tempests, accidents, strikes, lockouts, combinations of workmen, or other industrial disputes (whether involving the Company’s workforce or any other party), failure of a utility service or transport network, act of God, civil commotion, malicious damage, compliance with any law or governmental order, rule, regulation or direction, accident, breakdown of plant or machinery, fire or any failure to deliver to the Company by any supplier or subcontractor, or other circumstances beyond the Company’s reasonable control (Force Majeure Event). If the Force Majeure Event prevents the Company from discharging any of its obligations under the Contract for more than six weeks, the Company shall, without limiting its other rights or remedies, have the right to terminate the Contract immediately by giving written notice to the Purchaser. o) Any specification submitted shall be deemed to suit the conditions to be met and no liability will be accepted in respect of the unsuitability to such conditions of any specification.
218
Salisbury 01722 414 011
g) If the Purchaser (being a company) fails to pay an account by the due date its directors will be personally liable to the Company and in the case of two or more directors such liability will be both joint and several. h) The Company reserves the right at any time at its discretion to demand security for payment before continuing with or delivering any order. i) The Company’s quotation is submitted on the assumption that arrangements for payment (including reference as to credit-worthiness) will prove satisfactory to the Company. Should this prove not the case and should any payment to the Company be overdue, the Company reserve the right, at any time, to suspend any work proceeding, discontinue delivery of any [materials or] goods and the Company shall have no liability for such a suspension of, or failure to make delivery in these circumstances. j) Any query or dispute regarding any invoice rendered by the Company must be made in writing within 5 working days, after which period the invoice will be regarded as accepted and must be paid in accordance with its terms. 4) RISK AND THE PASSING OF PROPERTY a) Risk in the Goods shall pass to the Purchaser when the Goods are delivered to or collected by the Purchaser or its agent. b) Notwithstanding risk in the Goods passing in accordance with paragraph (a) of this Condition, title in the goods shall not pass to the Purchaser until whichever shall be the first to occur of the following: i) Payment being received by the Company for the Goods and no other amounts then being outstanding from the Purchaser to the Company in respect of other Goods supplied by the Company. ii) The Purchaser selling the Goods in accordance with the provisions of these Conditions in which case title to the Goods shall be deemed to have passed to the Purchaser immediately prior to delivery of the Goods to the Purchaser’s customer. iii) The Company waiving its rights under paragraph (b) of this Condition in respect of specified Goods whereupon title to the said Goods shall forthwith vest in the Purchaser. c) The Purchaser is licensed by the Company to use or to agree to the sale of the Goods delivered to the Purchaser subject to the Conditions set out in paragraph (d) below. d) Until title to the Goods passes: i) The Purchaser will hold the goods as fiduciary agent and bailee for the Company. ii) The Goods shall subject to paragraph (c) of this Condition be kept separate and distinct from all other property of the Purchaser and of third parties and in good and substantial repair and condition and be stored in such a way as to be clearly identifiable as belonging to the Company. iii) The Company may at any time revoke the power of sale and use contained in paragraph (c) of this Condition by notice to the Purchaser if the Purchaser is in default for longer than 14 days in the payment of any sum whatsoever due to the Company whether in respect of the Goods or any other Goods supplied at any time by the Company to the Purchaser or if the Company has bona fide doubts as to the solvency of the Purchaser. e) The Purchaser’s power of sale and use contained in paragraph (c) of this Condition shall automatically cease if the Purchaser has a petition presented for its winding-up or passes a resolution for voluntary winding-up otherwise than for the purpose of a bona fide amalgamation or reconstruction or compounds with its creditors or has a receiver appointed of all or any part of its assets or becomes bankrupt or insolvent or enters into any arrangement with creditors or takes or suffers any similar action in consequence of debts or carries out or undergoes any analogous act or proceeding under foreign law. f) Upon determination of the Purchaser’s power of sale and use pursuant to sub-clause (iii) of paragraph (d) of this Condition the Purchaser shall place any Goods in its possession or under its control and unsold at the disposal of the Company and the Company shall be entitled to enter upon any premises of the Purchaser for the purpose of removing such Goods. 5) DELIVERY a) Delivery will be deemed to have been effected after the Goods leave the premises of the Company or as the case may be the premises of the suppliers to the Company in circumstances where the Goods are delivered direct from such suppliers. b) Time of delivery is not of the essence. c) The Company shall not be liable for any loss whatsoever or howsoever arising caused by its non-delivery or by the failure to made goods ready for collection on the due date. d) The Company reserves the right to make delivery by instalments and to tender a separate invoice in respect of each instalment. e) When delivery is to be by instalments or the Company exercises its right to deliver by instalments under paragraph (d) of this Condition or if there be a delay in the delivery of any one or more instalments for whatever reason this will not entitle the Purchaser to treat the Contract as repudiated or to damages.
sales@strukta.co.uk
www.strukta.co.uk
TERMS & CONDITIONS f) Deviations in quantity of the Goods delivered (representing not more than 10 per cent by value) from that stated in these Conditions shall not give the Purchaser any right to reject the Goods or to claim damages and the Purchaser shall be obliged to accept and pay at the Contract rate for the quantity of the Goods delivered. g) The Company reserves the right to make an delivery charge according to the circumstances of each order. Deliveries of £25.00 nett goods value and over are carriage paid within the Company’s normal delivery area. Under £25.00 a surcharge of £5.00 will be applied. h) Shortages must be notified to the Company within three days of delivery. 6) INDEMNITY The Company shall not be liable for any indirect or consequential loss or damage of any description incurred by the Purchaser as a result of any failure or fault in the Goods or for any damages or personal injuries or other losses, howsoever arising and howsoever caused directly or indirectly by the Goods.
xii) The Purchaser (being an individual) dies or, by reason of illness or incapacity (whether mental or physical), is incapable of managing his own affairs or becomes a patient under any mental health legislation. b) Without limiting its other rights or remedies, the Company may terminate the Contract with immediate effect by giving written notice to the Purchaser if the Purchaser fails to pay any amount due under this Contract on the due date for payment. c) [Without limiting its other rights or remedies, each party shall have the right to terminate the Contract by giving the other party one months’ written notice.] d) Without limiting its other rights or remedies, the Company shall have the right to suspend provision of the Services under the Contract or any other contract between the Purchaser and the Company if the Purchaser becomes subject to any of the events
7) PRICES
listed in paragraph a)ii) to paragraph a)xii), or the Company reasonably believes that the Purchaser is about to become subject to any of them, or if the Purchaser fails to pay any amount due under this Contract on the due date for payment.
Goods will be invoiced at prices ruling at date of despatch unless agreed in writing between the parties.
11) CONSEQUENCES OF TERMINATION
8) LIABILITY (LIMITATION OF LIABILITY: THE PURCHASER’S ATTENTION IS PARTICULARLY DRAWN TO THIS CLAUSE)
On termination of the Contract for any reason:
a) Nothing in these Conditions shall limit or exclude the Company’s liability for: i) Death or personal injury caused by the Company’s negligence, or the negligence of its employees, agents or subcontractors; ii) Fraud or fraudulent misrepresentation; or iii) Breach of the terms implied by section 2 of the Supply of Goods and Services Act 1982 (title and quiet possession). b) Subject to paragraph 8) of this clause: i) The Company shall under no circumstances whatever be liable to the Purchaser, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, for any loss of profit, or any indirect or consequential loss arising under or in connection with the Contract; and ii) The Company’s total liability to the Purchaser in respect of all other losses arising under or in connection with the Contract, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, shall in no circumstances exceed the amount actually received by the Company by way of payment for provision of the Goods. iii) Except as set out in these Conditions, all warranties, conditions and other terms implied by statute or common law are, to the fullest extent permitted by law, excluded from the Contract. c) This clause 8 shall survive termination of the Contract. 9) ASSIGNMENT a) The Company may at any time assign, transfer, charge, subcontract or deal in any other matter with all or any of its rights under the Contract and may subcontract or delegate in any manner any or all of its obligations under the Contract to any third party or agent. b) The Purchaser shall not, without the Company’s prior written consent, assign, transfer, charge, subcontract or deal in any other manner with all or any of its rights or obligations under the Contract. 10) TERMINATION a) Without limiting its other rights or remedies, the Company may terminate the Contract with immediate effect by giving written notice to the Purchaser if: i) The Purchaser commits a material breach of the Contract and (if such a breach is remediable) fails to remedy that breach within 3 days of being notified in writing of the breach;
a) The Purchaser shall immediately pay to the Company all of its outstanding unpaid invoices and interest and, in respect of Goods supplied but for which no invoice has been submitted, the Company shall submit an invoice, which shall be payable by the Purchaser immediately on receipt; b) The Purchaser shall return all of the Goods which have not been fully paid for. If the Purchaser fails to do so, then the Company may enter the Purchaser’s premises and take possession of them. Until they have been returned, the Purchaser shall be solely responsible for their safe keeping and will not use them for any purpose not connected with this Contract; c) The accrued rights, remedies, obligations and liabilities of the parties as at expiry or termination shall not be affected, including the right to claim damages in respect of any breach of the Contract which existed at or before the date of termination or expiry; and d) Clauses which expressly or by implication have effect after termination shall continue in full force and effect. 12) NOTICES a) Any notice or other communication required to be given to a party under or in connection with this Contract shall be in writing and shall be delivered to the other party personally or sent by prepaid first-class post, recorded delivery or by commercial courier, at its registered office (if a company) or (in any other case) its principal place of business, or sent by fax to the other party’s main fax number. b) Any notice or other communication shall be deemed to have been duly received if delivered personally, when left at the address referred to above or, if sent by pre-paid first class post or recorded delivery, at 9.00 am on the second Business Day after posting, or if delivered by commercial courier, on the date and at the time that the courier’s delivery receipt is signed, or if sent by fax, on the next Business Day after transmission. c) This clause 12 shall not apply to the service of any proceedings or other documents in any legal action. For the purposes of this clause, “writing” shall not include e-mails and for the avoidance of doubt notice given under this Contract shall not be validly served if sent by e-mail. 13) WAIVER a) A waiver of any right under the Contract is only effective if it is in writing and shall not be deemed to be a waiver of any subsequent breach or default. No failure or delay by a party in exercising any right or remedy under the Contract or by law shall constitute a waiver of that or any other right or remedy, nor preclude or restrict its further exercise. No single or partial exercise of such right or remedy shall preclude or restrict the further exercise of that or any other right or remedy.
ii) The Purchaser suspends, or threatens to suspend, payment of its debts or is unable to pay its debts as they fall due or admits inability to pay its debts or (being a company) is deemed unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986 or (being an individual) is deemed either unable to pay its debts or as having no reasonable prospect of so doing, in either case, within the meaning of section 268 of the Insolvency Act 1986 or (being a partnership) have any partner to whom any of the foregoing apply:
b) Unless specifically provided otherwise, rights arising under the Contract are cumulative and do not exclude rights provided by law.
iii) The Purchaser commences negotiations with all or any class of its creditors with a view to rescheduling any of its debts, or makes a proposal for or enters into any compromise or arrangement with its creditors;
b) If any invalid, unenforceable or illegal provision of the Contract would be valid, enforceable and legal if some part of it were deleted, the provision shall apply with the minimum modification necessary to make it legal, valid and enforceable.
iv) A petition is filed, a notice is given, a resolution is passed, or an order is made, for or in connection with the winding up of the Purchaser (being a company) other than for the sole purpose of a scheme for a solvent amalgamation with one or more other companies or its solvent reconstruction; v) The Purchaser (being an individual) is the subject of a bankruptcy petition or order; vi) A creditor or encumbrance of the Purchaser attaches or takes possession of, or a distress, execution, sequestration or other such process is levied or enforced on or sued against, the whole or any part of the Purchaser’s assets and such attachment or process is not discharged within 14 days; vii) An application is made to court, or an order is made, for the appointment of an administrator or if a notice of intention to appoint an administrator is given or if an administrator is appointed over the Purchaser (being a company); viii) A floating charge holder over the Purchaser’s assets (the Purchaser being a company) has become entitled to appoint or has appointed an administrative receiver; ix) A person becomes entitled to appoint a receiver over the Purchaser’s assets or a receiver is appointed over the Purchaser’s assets;
14) SEVERANCE a) If a court or any other competent authority finds that any provision of the Contract (or part of any provision) is invalid, illegal or unenforceable, that provision or part-provision shall, to the extent required, be deemed deleted, and the validity and enforceability of the other provisions of the Contract shall not be affected.
15) NO PARTNERSHIP Nothing in the Contract is intended to, or shall be deemed to, constitute a partnership or joint venture of any kind between any of the parties, nor constitute any party the agent of another party for any purpose. No party shall have authority to act as agent for, or to bind, the other party in any way. 16) THIRD PARTIES A person who is not a party to the Contract shall not have any rights under or in connection with it. 17) GOVERNING LAW AND JURISDICTION This Contract, and any dispute or claim arising out of or in connection with it or its subject matter or formation (including non-contractual disputes or claims), shall be governed by, and construed in accordance with, English law, and the parties irrevocably submit to the exclusive jurisdiction of the courts of England and Wales.
x) Any event occurs or proceeding is taken with respect to the Purchaser in any jurisdiction to which the Purchaser is subject that has an effect equivalent or similar to any of the events mentioned in paragraph ii) to paragraph ix) of this Condition (inclusive); xi) The Purchaser suspends or ceases, or threatens to suspend or cease, to carry on all or a substantial part of its business; or
Salisbury 01722 414 011 Portsmouth 023 92 385 656
All content © strukta group 2014 The whole of this product guide is covered by copyright and must not be reproduced in part or in whole by photocopying, electronic reproduction, mechanical reproduction or any other means, without the written permission of strukta Group Ltd. E&OE
Portsmouth 023 92 385 656
Cherry Orchard Lane Churchfields Industrial Estate Salisbury Wiltshire SP2 7LD
sales@strukta.co.uk
Bournemouth 01202 614 041 sales@strukta.co.uk www.strukta.co.uk
www.strukta.co.uk
219
Cherry Orchard Lane Churchfields Industrial Estate Salisbury Wiltshire SP2 7LD
Salisbury 01722 414 011 Portsmouth 023 92 385 656 Bournemouth 01202 614 041
‘Building trade on trust’ 220
Salisbury 01722 414 011
sales@strukta.co.uk www.strukta.co.uk
™
sales@strukta.co.uk
www.strukta.co.uk