PORI-P3 Mobile Automated Radar Data Processing Post

Mobile Automated Radar Data Processing Post

Mission

The PORI-P3 system is designed to receive and process radar data fed by mated radars and interoperating systems.

The PORI-P3 data processing post is a unified air situation data source for Polyana-D4M1 air defence missile brigade automated control system, Ranzhir UBCP, and PORI-P1M/PORIP2M/PORI-P2VM posts.

Simultaneous connections via digital datalinks: with superior CPs with interoperating installations 1 up to 2

with subordinate installations

up to 3 with radars with digitalsignal output up to 5 Simultaneous connections via remote multiplexing equipment: with radars with analogue signaloutput up to 2 with mobile radio altimeters with analogue signaloutput up to 2

Total number of targets received via coded datalinks up to 255

Singleand group target tracksand bearings: when working with digital output radar up to 70 when workingwith analogue output radar up to 30 Data transmission range to radios, km up to 40 Into-action time, min (with data received from digital output radar) not more than 20

Into-action time, min (with all radars/mobile radio altimeters connected and long-range communications antenna assemblydeployed), min not more than 45 Uninterrupted operation time, hrs not less than 72

The PORI-P3 ensures information and technical compatibility with different automated control systems, high ECM immunity, high operational capacity and minimal air target tracking errors, automatic tracking initiation by analogue and coordinate target echoes, calculation of target tracks with identification of all data sources.

Composition

The PORI-P3 system comprises MP204 mobile unit mounted on the Ural-43203 truck chassis, VP501 trailer mounted on the van body, and EDx30-T400-1RAM3 mounted on the KamAZ-4114 truck chassis.

EW, ELINT, AND COMMUNICATIONS SYSTEMS

AIR DEFENCESYSTEMS