DELTA PL95H
HYDROSTATIC PIPELAYER
Solid basic design with advanced technology
STANDARD EQUIPMENT • • • • • • • • • • • • •
• • • • • •
Antifreeze Automatic boom stopper Boom length 9 m Hydraulic foot brakes Front bumper Hydraulically controlled counterweights Drawbar Fan blower Filters, engine oil, full Áow and by-pass with replaceable elements Filters transmission Filter hydraulic system Fuel filter Guards Brake Fuel level Temp. oil reducer Temp. oil exchanger Press. Boost Filter tank Oil level Filter exchanger Winches, two separate, for hook and boom Certified rollbar Instrument panel light Horn Lights w/guards, 4 front an tractor, 2 rear Master disconnect switch
8000
3646
3646
5727
3090
9880
DELTA PL95H HYDROSTATIC PIPELAYER
3640
2270
6433
4454
5053
TRANSMISSION
ENGINE Make and model I-6, 4-Stroke-Cycle Diesel Bore Stroke Displacement Certification rating Aspiration Aftercooled Compression Ratio Rotation (from flywheel end) Weight, Net Dry (approximate kg, lb)
3650
Caterpillar C13 ACERT 130.0 mm (5.12 in) 157.0 mm (6.18 in) 12.5 L (762.8 in3) 440HP Turbocharged 17.3:1 Counterclockwise 939 kg, 2070 lb
Main pump: Brand Max flow Main pressure Max pressure Service pump Main pump Max flow Final drive
: 2 axial piston pumps : Sauer Danfoss : 286.5 lit/min : 420 bar : 500 bar : tandem gear type : axial piston type: hydrostatic close circuit : 286,5l/min x 2” : separate oil circuit with oil cooler and replacement filter.
BOOM
OPERATING WEIGHT
Type : Std. 9 m A frame welded box square section Diameter wire rope : 19 mm - 3/4 in Minimum breaking strength rope : 305 KN - 68,58 lb Number of Hook lines :6 Number of Boom lines :5
56.800 kg
ADJUSTABLE COUNTERWEIGHTS
CONTROL SYSTEM
QD-CS: quick-disconnected counterweight system. For the possibility of disassembly in a short time (all the counterweight pack.) Removable counterweight : 4 unit 2600 kg each Total weight extendable : 10.400 kg
LIFTING CAPACITY Maximum lift 95.000 kg
Electronic governing, PTO speed control, Programmable ratings, Cold mode start strategy, Automatic altitude compensation, Power compensation for fuel temperature, Programmable low and high idle and total engine limit, Electronic diagnostics and fault logging, Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4
WINCH
Hook
Boom
Winches Drum diameter Flange diameter Drum length Hooklines
Two Braden dual brake 270 mm 330 mm 508 mm 546 mm 343 mm 500 mm 8
1
2
3
4
5
6
7
8
9
1 Caterpillar C13 ACERT Tier IIIA engine 440HP (made in USA) 2 Caterpillar Messenger Display (made in USA) 3 Caterpillar D9 ďŹ nal drive (made in USA) 4 Caterpilar D9 Chain (made in USA) 5 Paccar Braden winches (made in USA) 6 Rexroth hydraulic motors for winches (made in Germany) 7 Sauer Danfoss Hydraulic pumps for hydrostatic transmission (made in Germany) 8 Sauer Danfoss Hydraulic motors for hydrostatic transmission (made in Germany) 9 Joystick controlled Hydrostatic transmission 10 Joystick controlled hydraulic winches 11 LMI safety system on Request (made in Netherlands) CE marked 10
11
lb x 1000
kg x 1000
220 200
100 95 90
180
80
Max. Lift Capacity S.A.E. J743B
70
Max. Load Capacity ISO 8813
Lifting Capacity
160 140 120 100
1399 Engine Torque lb•ft
40 20
1159 1038
60
415 Engine Power bhp
50 45 40
380 344 308
80 60
1279
30
358
20
BSFC lb/bhp-hr
Working Range ISO 8813
10
1.5 2 4
6
2.5
3
8
10
3.5 4 12
344 337
0 1
351
4.5 5 14
16
5.5 18
Boom Overhang
6
6.5
20
22
7 24
M
1200
1400
1600
1800
2000
Ft
HYDRAULIC WINCHES
CONTROLS
Type
Joystick control winches Joystick counterweights Joystick controlled tracks
Final drive Brakes Hydr. Motors
: Hydraulic controlled drums (reversible.) Driven by variable flow hydraulic pump and control valve block in open circuit. : Compact hydrostatic drive unit, two-stage planetary gear : Integrated multiple disk brakes, spring applied hydraulic release : Rexroth
TRACK FRAME 8 roller track frame with sealed and lubricated Caterpillar D9 type chain Number of bottom rollers : 8 Number of carrying rollers : 2 Gauge : 2.6 m - 8.5 ft Standard shoes width : 32 in ELECTRIC SYSTEM Operating voltage Capacity (total) Starter capacity Alternator
: 24 V : 220 Ah : 7.5 Kw : 55 A
FLUID CAPACITIES Fuel tank Hydraulic system circuit Cooling system Engine oil Final drive each
: 360 liters : 410 liters : 60 liters : 40 liters : 24 liters
2200
WINCH SPECIFICATION Main Pump Type : Linde HPR 105-02 axial piston variable displacement pump Valves Max capacity : 286 lit/min Working pressure : 420 bar Control Type Pilot units for remote control of winch motors and counterweight Progressive and sensitive operations Service Pump Type : Gear pump Max capacity : 10 liters.min - 2.6 U.S. gal/min Working pressure : 30 bar - 435 p.s.i. OPTIONS • Delta LMS Safety System • E-rops enclosed cab with heather and/or Air conditioning. • Cold weather kit • Rear winch • GPS telemetry system WARRANTY 1 Year Limited Warranty
Disclaimer The information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifications mentioned. Illustrations do not necessarily show the product in standard conditions. The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.
DELTA PL95H
HYDROSTATIC PIPELAYER Dealer:
The Netherlands
United Arabic emirates
United Arabic emirates
Delta Machinery
Ras Al Khaimah Machineries LLC
Global Pipeline Supplies FZCO
Haven M529, Port of Moerdijk Mark S Clarkelaan 6 4761RK Zevenbergen The Netherlands
Kharran Road, Al ďŹ liyah Ras Al Khaimah United Arab Emirates
17553 Jebel Ali Free Zone Dubai United Arab Emirates
Tel + 31 888 966 966 Fax + 31 888 966 950
Tel + 971 72289338 Fax + 971 72289337
Tel + 971 48833442 Fax + 971 48833545
sales@deltaheavymachinery.com www.deltaheavymachinery.com
rakplant@emirates.net.ae www.rakmachineries.com
rpt@dial.pipex.com www.glpsupplies.com