Mining Equipment Buyers Catalogue v60

Page 1

Prospector Mining Equipment

Buyers’ Catalogue 60 Spring/Summer 2017


Introducing The S12H Hammer Head

KEY TO OPENING UP EXTRA WIDE OPENING WRENCH

original manufacturer (1988) 1

3/4 ”

A Unique Combination Hammer / Adjustable Wrench

1 st of its kind

Opens to same size as 15” Adjustable - But only 1/2 the weight

Miners’ Wrench by Rastall

Used for pulling Drill Steel and accommodates nuts on 1” - 3” couplings

13/4”opening

•  12” Adjustable with • 6” Measure Mark For Boot Leg •  Heavy Duty Construction •  Drop - Forged •  Heat Treated • Precision Machined • Weight - 1.55 lbs. •  Hex 7/8”

• Hammer Head heat treated separately to Rc 50-60 for extra safety • Extra material on major body stress points • Meets all U.S. and Canadian specifications • Heavy duty construction

Opens to same size as 15” Adjustable - But only 1/2 the weight

• High-Grade alloy steel • Drop-Forged • Heat-Treated

Used for pulling drill steel and accommodates nuts on 1” - 3” Victaulic couplings

Home of the Original Made and designed in 1969 by Rastall

RASTALL TOOL CORPORATION

Very close fit tolerance between knurl & travelling jaw so jaw does not skip over knurl when pressure is applied

RASTALL TOOL CORPORATION

telephone:(705)675-2431 telex: 067-7192

telephone:(705)675-2431 facsimile: (705)675-6502

268 Hemlock St, Sudbury Ontario Canada P3C 1H9

268 Hemlock St, Sudbury Ontario Canada P3C 1H9

Miners’ Wrenches

Cheater Steel (drill rod extension)

The Rastall RS15-H Hammer Head Adjustable Spud Wrench

The Rastall RS - 15 Adjustable Spud Wrench

Special Wide Opening 1 3/4" / 44.45mm

The Rastall Beaver RSWO series Adjustable Wrenches

The Rastall S12H Hammer Head Miners’ Wrench and Holder

RSWO - 10

Special Wide Opening

The Rastall DYWIDAG Installation Tool Rod Spinner and Nut Driver

1 15/16" / 50mm

Special Wide Opening

The Rastall RBD118L Roofbolt Dollies Custom Drives Available

1 3/4" / 44.45mm

The Rastall S12 Miners’ Wrench

R-25 R-28 R-32

RSWO - 8

7/8” Hex

Special Wide Opening 1 9/16” / 40mm

8 Socket Sizes Available

• • • •

RSW RSW RSW RSW

-

7/8” x 11/16” 9/16” x 3/4” 1-1/4” x 1-7/16” 1-1/4” x 1-5/8”

The Rastall Swivel Wrenches

RastallTool.com

Used On Groove-Type Couplings

RSWO - 6

The Rastall Scoop Tram Wheel Socket

All Sizes Available

Special Wide Opening

tel: 705-675-2431 toll free: 1-800-461-6255 fax: 705-675-6502

1 5/16” / 34mm

268 Hemlock St, Sudbury Ontario Canada P3C 1H9 crastall@rastallcorp.com

The Rastall Muck Scoop - Pelican Pick

3/4” Drive

1/2” Drive



Sellers

ref.#3178

The best way for you to show the equipment you have for sale is to deliver them with a regular flow of current, organized information, in one package: The Mining Equipment Prospector Our targeted and unique publication is distributed directly into the hands of astute mining equipment buyers, around the world. It features an updated and accurate catalogue of underground mining equipment available for sale, and contacts to get both suppliers and buyers connected.

Remember

It won't SELL if nobody knows you have it! Denis Martel, President List your Equipment list@miningequipment.net Subscriptions | Sales Leads list@miningequipment.net

Equipment Wanted list@miningequipment.net

Contents Company Profiles . . . . . . . . . . . . . . 43-46 Equipment Database . . . . . . . . . . . . 11-42 Press Releases . . . . . . . . . . . . . . . . . . . 47

Advertisers Bull Powertrain . . . . . . . . . . . . . . . . . . . . 5 BPT Components and Parts Inc. . . . . . . 8 Cardinal Equipment Group . . . . . . . . . . 51 Certified Mining & Construction . . . . . . . 3 DUX Machinery Corporation . . . . . . . . . 54 Element Mining Ltd. . . . . . . . . . . . . . . . 55 Gladiator Equipment Inc. . . . . . . . . . . . . 6 Hurley Ventilation Technologies Inc. . . . 52 Hurley Industrial Thermal Technologies. . 53 L&M Powertrain Parts . . . . . . . . . . . . . . 56 Miller Technology . . . . . . . . . . . . . . . . . . 1 MeMO Mine Operators Conference . . . 48 Normet . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PDAC . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Rastall Tool Corp. . . . . . . . . . . . . . . . . . . 2 Resemin . . . . . . . . . . . . . . . . . . . . . . . . . 6 Rock-Tech . . . . . . . . . . . . . . . . . . . . . 6, 7 Walden Group . . . . . . . . . . . . . . . . . . . 10 Wilson Mining Products Inc. . . . . . . 49, 50

www.miningequipment.net www.miningequipment.forsale

Interaction with buyers From the publications in which you've advertised ask yourself, which ones have contacted you directly with sales leads on a regular basis? Well, The Mining Equipment Prospector does. The database listings are free Sellers are contacted prior to publishing each issue and the database is completely updated. To keep the database current, non-renewed listings are dropped. This ensures that The Mining Equipment Prospector remains an efficient reference tool for buyers. Advertising is possible and optional Whether you'd like to feature equipment photo ads or advertise your services, many options are available.

Buyers The Mining Equipment Prospector is your source for new or quality used mining equipment and parts. This issue contains more than 2,600 current machine listings available around the globe, including all pertinent details and contact information. If you can't find the equipment you require or simply want a better selection, we invite you to try our Network Search. This will enable you to reach a vast network of equipment suppliers immediately and to get this team of experts working for you, at no cost. Simply send us an e-mail with your requirements at list@MiningEquipment.net or give us a call 705-560-5519. We will get the word out expeditiously. Over the years, we have built an extensive list of reliable equipment suppliers from around the globe. By simply contacting us with your requirements, you will maximize your buying options and reduce wait time. Contact us, it's that easy: Call us at: 705-560-5519 Regards Denis Martel

1- New Resemin Muki FF c/w Montabert HC50 drifter Only 1050 mm width. For more information contact: Ricky Lemieux at Rock-Tech, 705-692-7625, ricky@rock-tech.net

Ready to Go Underground Dump Truck DTX4100M4D Like New – 21.5 Hours, 14,000lbs Capacity, J&S Manufactured, Liquid Cooled Mercedes 904 Engine 147HP @ 2200RPM, Dana 20,000 Power Shift Transmission, Dana 123 Axles. Contact: Martin Short at Walden Equipment tel: 705-682-2084, mshort@waldenequipment.ca

ref. # 5153

2015 Getman A64 Fuel Truck. Getman anfo loader, scissordecks, shotcrete w/manlift, personnel carriers and A64’s with crane also available. Call Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca ref.# 2158

2- NEW DUX DT-20N u/g trucks, 20 tonne, Cummins QSB 6.7 (220 HP) engine. Contact: Hermann Bumueller at +1-450-581-8341, e-mail: sales@duxmachinery.com

ref. # 16149

1 of 2- Caterpillar R1700G Loaders​​, 2007, Erops​ For more information contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com


KESSL ER + CO

New Outright | Repair and Return | Rebuilt / Exchange BULL Drivelines

1-800-461-5959, fax: 705-560-5327 1510 Fairburn Street Sudbury, ON Canada P3A 1N7

705-560-2855

www.BULLIND.com


since 1989

Narrow Vein to Tunneling

Roof Bolters

Roof Bolters with Screen Handlers

RESEMIN offers the best alternative of drilling rigs for underground mining and civil works for tunnels. It’s simple and robust design avoids complexities and sophistication. Resulting in more productivity. resemin.com

World's Smallest Roof Bolter Front Face Jumbos

Safety first, last and always. No more manual bolt installations

Production Long-Hole Western Canada

Canadian Distributors

tel: 780-980-7555 gladiatorequipment.com

Eastern Canada

rock-tech.net



1 New Titanium SL812

scissor lift complete with: • 8 x 12 deck with 6,000 lbs cap. • +/- 24” side shift • 4 x 48” stroke stabilizers • Remote tram from deck • Mercedes 904 engine • 32,000 Dana transmission ref. # 1058 • 113 Dana axles,12:00 x 20 tires • Canopy Contact: Ricky Lemieux at Rock-Tech, 705-692-7625 • Manual Ansul fire suppression e-mail: ricky@rock-tech.net

ref.#877

ref.#878

2 Rear Frames and a Dump Box for TORO 40/50. Contact: Aibar Tokzhumanov at Kaz-Can Corporation, tel: 416-567-4077, e-mail: aibar.tok@gmail.com

Used M40, RL3000 Scissor Lift, Unit 3160, Deutz BF4M1013 liquid cooled diesel engine, 32000 series powershift transmission, New Holland D65I front axle and John Deere JD1200 rear axle, 7’ x 9’ rear shift deck Contact: Sandy Baril at Marcotte Mining Machinery tel: 705-566-5030, e-mail: info@mar-inc.com

ref. # 1057

NEW DUX S1-SL6000 u/g scissor lift truck, 6,000 lb. safe lift capacity, 4-meter reach, 6x12-ft deck, Cummins QSB 4.5 (148 HP) engine. For more information contact: Hermann Bumueller at +1-450-581-8341, e-mail: sales@duxmachinery.com

ref. # 7129

ref.# 1055 J&S SLX5000DF Scissor lift, (built in 2012, low hours) Deutz D914L06 engine, 5000 lbs capacity, 8’x12’ deck c/w side shift. Refurbished and ready to work. Contact Frank at RES Equipment Sales, tel: 705-822-1586, fcrites@resequip.com for more information or a quotation.

ref. # 1722B

1-Cat 135H, Underground approved 2008 grader with 13,400 hours. For more information contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com

ref. # 7132

1 of 3 11,000 lbs CAT TH514C, 2014 telehander For more information contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com


ref. # 16148

2 x 2012 Cat R1600G with 8465 hours For more information contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com ref. # 3148

ref. # 3176

2014 Atlas Copco Boltec S. 191 hrs, Open ROPS/FOPS, fire suppression, Swellex. For more information contact Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca 2014 Atlas Copco 282 Jumbo. 623 hrs, Open ROPS, fire suppression, set-up for 14’ drill steel

Quasar Bolter, presently set up for 5 foot long split set bolts, Deutz F3L912W tram, 480V electrics for drilling, Hydrastar 200 drill and impactor, 4 foot wide carrier, fire suppression, ROPS. E-mail mark.levin@minenv.com, call: 303-567-4174.

ref.#2149 2 DUX DT-50, 50 ton payload u/g dump trucks, only 1000 hours since new, DDEC 60 series, photo of similar unit. Contact Aibar Tokzhumanov at Kaz-Can Corporation tel: 416-567-4077, e-mail: aibar.tok@gmail.com

ref. # 3166 Contact Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca

MTI/JOY Veinrunners. 4 units with 3 of the 4 rebuilt/ upgraded by MTI in 2011. Approx. $100K worth of spare parts available with package purchase. Contact Frank at fcrites@resequip.com for more information or a quote. 3- New Deutz Engine, Model: TCD 2012 L04 2v, HP: 138

ref. # 16151

JCI 125M Scooptram, 1.25 Yard, Year: 1995, Wet Disc Brakes. For more info contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com

ref. # 3179

Tamrock/Sandvik HS 205 2 Boom Jumbo, Electric/Hydraulic Jumbo, C/W Tamrock Drills, 16 foot feeds For more information contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com

For more information contact: Tim McDowell at +1 602-885-6560 tim@mcdowellequipment.com

ref. # 882


• • • • • •

Tensioning Winching Services Hoist Installation Equipment Rebuilding Maintenance and Repair Equipment Sales and Rentals

Ph: 705-682-2084 1-877-682-2084

www.waldenequipment.ca

Walden Equipment offers the most diversified

tensioning and rope changing service to the industry today.

SOLD ref. # 7133

ref.# 2159 NEW DUX TD-18 u/g teledumper (telescopic dump box), enclosed fully-equipped cab, 18.8 tonne, Cummins QSB 6.7 (220 HP) engine. Contact: Hermann Bumueller at +1-450-581-8341, e-mail: sales@duxmachinery.com

ref. # 1831

National Series 1800 40 ton crane with 20000 km volvo truck For more information contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com

Normet Canada Refurbs, Rebuilds and Remanufactures: 2007, 5 cubic meter capacity Normet Transmixer, OEM rebuilt in 2016, BF4M1013 Tier 2 engine, Tier 3 MTU engine also available. Call Randy Ouimet tel: 705-692-2800 ext. 213 or e-mail: randy.ouimet@normet.com

ref.#1832

ref. # 3174 Secoma Quasar NV. Full diesel power with Tier III Cummins QSB 4.5, 160 HP, upgraded pumps, Hydrastar 300, 6/10 telescopic feed, dual rollovers, umbilical remote drill controls, NV-6 longholing feed with hydraulic centralizer available, fire suppression, ROPS. This versatile rig provides face drilling, bolt hole drilling and longhole drilling capability all on one platform, anywhere in the mine, independent of mine electrical power. E-mail: mark.levin@minenv.com or call: 303-567-4174.

ref. # 1829B

1- RDH Transmixer 600 Deutz F6L-914, 1400 hours since new 6 Yard capacity For more info contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com

Meyco Oruga wet mix concrete spayer, diesel/electric, only 1220mm wide, working range 11.2m x 8.2m. For more information call Micah Ferguson at Element Mining, t: 705-525-6163, e-mail: m.ferguson@elementminingltd.com

www.MiningEquipment.net

Atlas Copco ST2D, 2 Yard, Deutz Engine Approx 1900 hours, Year: 1997 For more information contact: Tim McDowell at +1 602-885-6560 e-mail: tim@mcdowellequipment.com

ref. # 16152


Mining Equipment Index Anfo Loaders . . . . . . . . Compressors & Fans . Crushers & Mills . . . . . Drills & Bolters . . . . . . Generators . . . . . . . . . .

Pages

13 16 31 26 24

Mine Hoists . . . . . . . Miscellaneous . . . . . Parts . . . . . . . . . . . . . Open Pit Mining . . . . Rail equipment . . . .

The Mining Equipment Prospector p.11 Ref# w 17.01

Pages

13 37 40 13 36

Scissor Lifts . . . . . . . . . Scooptrams (LHDs) . . Shotcrete equipment . . Underground Trucks . . Utility Vehicles . . . . . . . Wanted . . . . . . . . . . . . .

The Mining Equipment Prospector Pages

11 17 22 24 33 11

©

The Mining Equipment Prospector is not responsible for any cost or liability for misrepresentation due to incorrect information or clerical/typographical errors. Our intent is to provide a link between Buyers & Sellers of Mining Equipment. Copyright 2017 Reproduction in whole or in part of this directory is prohibited. All Rights Reserved to The Mining Equipment Prospector.

MEP Sales Leads, available to paid subscribers daily via e-mail

Equipment WANTED MEP SALES LEADS, AVAILABLE TO PAID MEMBERS DAILY VIA E-MAIL

Contact

Company

Telephone E-mail

Spicer / Dana / Clark Transmissions, Torque converters, Axles.... cores wanted

Pierre Paquette

Bull Powertrain

705-560-3700

ppaq@bullind.com

w 17.01

FORD Axles models D45, D62, D64, D65... cores wanted

Pierre Paquette

Bull Powertrain

705-560-3700

ppaq@bullind.com

w 17.02

Looking for a good Wagner ST-7.5Z, around the 1995 / 1997 model.

Jim Anderson

JDS Silver Inc.

1-778-738-0640

jima@jdssilver.com

w 17.03

Looking for HU Air tugger core

Micah Ferguson

Element Mining Ltd.

705 561 2480

m.ferguson@elementminingltd.com

w 17.03

We are also looking to buy used and core IR Air Tuggers Info

Micah Ferguson

Element Mining Ltd.

705 561 2480

m.ferguson@elementminingltd.com

w 17.04

looking for 12 month rentals, on the following, SEE BELOW (w 17.04)

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

2 ea. Jumbo,1Boom, diesel, electro - hydraulic, 100m cable, must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

4 ea. LHD, 3 yd., ( one c/w remote and retrieval hook) must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

3 ea. Personnel carrier, 3 man (Minecat 100 or similar) c/w manbasket, forks must work in 2.4m wide x 3m high

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

1 ea. Portable ANFO loader, min 50 kg capacity must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

2 ea. 5000 - 6000lb scissor lift. and 1 ea. Boom truck must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

3 ea. 5.5 ton haulage trucks must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

1 ea. Backhoe c/w blade for 4m x 4m ramp maintenance must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

1 ea. Underground water truck for 4m x 4m ramp must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.04

2 ea. Supervisor's/Mechanic's vehicles, (Minecat 100 or similar) must work in 2.4m wide x 3m high headings

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.05

I'm trying to find a light-weight stoper. a GD 53 stoper or S53F jackleg drill or simular

Mark Wagner

Terra Alta Resources, LLC

907-617-0507

mark@terraaltaresources.com

w 17.06

I'm looking to rent a good CAT AD30 ug haul truck, for a 6 month lease.

Justin Goudreault

Hard Line

705.855.1310

jgoudreault@hard-line.com

w 17.07

immediate requirement for a work ready, full size, MacLean Bolter, for 8 month rental in Ontario

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.08

looking for a 2010 or newer Atlas Copco M4C or M6C

Gerald Angell

Ballistic Drilling Corp.

306 362 0013

ga.ballisticdrilling@gmail.com

w 17.09

interested in purchase machine ST-2D, mine company in Montenegro, in Niksic town

Mile Tomasevic

Bumech Crna Gora

+38269345448

tomasevic.mile@gmail.com

w 17.10

short term rentals, Minecat UT99C personnel carrier, units for Sudbury

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.10

short term rentals, Kubota R520 forklift, units for Sudbury

Steve Stamp

DMC Mining

705 920 4477

sstamp@dmcmining.com

w 17.11

Looking for reman transmission for sandvik 56026885. Dana Clark unit R32421-667

Viktor Ivannikov

+372 55578224

parts@transmission.ee

w 17.12

Looking to buy Cat Elphistone R1300, R1600 and R1700 LHD's, have you any clients looking to sell any?

Stu Greaves

705-692-4764

sgreaves@toromont.com

Transmission Group OÜ Toromont CAT

Scissor Lifts

Model Model

2

DUX P1 Porter w/scissorlift, cassette system

DUX

S1-SL6000 1334

1

NEW u/g scissor lift truck, 6,000 lb. safe lift cap. 4-meter reach, 6x12-ft deck, Cummins QSB 4.5 (148 HP) engine Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

DUX

Scissorlift

2

DUX Scissorlift, one is a 2009

Randy Size

780-469-5677

rsize@amt-inc.ca

DUX

SL6000

1

Needs engine and clutch

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco

975

1

EIMCO 975 SCISSOR LIFT

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Genie Lift

AWP24

1

Genie Lift, Model AWP24, 24’ Lift height, 300 pound capacity, operates on 110 volt.

Mark Allen

705-929-9608

mallen@vianet.ca

Getman

A64

1

GETMAN A-64/PL14 SCISSOR LIFT CARRIER

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

1

Getman A-64 Scissor Truck, Completely rebuilt, New 914 Engine, New Ford axles, Rebuilt Clark Transmission,

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

1

Getman A-64 Scissor Lift, complete with all standard equipment. This unit is for Sale or Rent.

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Getman

A64

3

Getman A64 Scissor deck, 2013, 2012, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

DUX

P1

S/N # Serial

9988, 9990 4919, 9998

4901, 4902

Qut. Qut Description Description:

SCISSOR LIFTS

Make Make

Contact Contact:

Randy Size

Telephone Telephone:

780-469-5677

E-mail e-mail:

rsize@amt-inc.ca


Eimco Lift Genie

Genie Lift Getman

1 1

975 AWP24

1 1

AWP24 A64

The Mining Equipment Prospector p.12

Getman Getman

Make Getman Getman Getman Getman Getman Getman Getman J&S J&S J&S J&S J&S J&S J&S J&S JCI JCI JCI JCI JCI

JCI Schmitz Joe

Joe Schmitz M40 M40 MacLean

A64 A64

Model A64 A64 A64 A64

A64 Scissor Lift

S/N 4901, 4902

4901, 4902

Scissor Lift SLX5000D

1 1

Getman A64 A-64Scissor Scissordeck, Lift, complete withEdmonton all standard equipment. This unit is for Sale or Rent. Getman 2013, 2012,

1 1

(1) Getman A64 Scissorlift, 12’hours) height, 8x12D914L06 deck, Deutz engine. 5300 hours Scissor lift, (built in 2012, low Deutz engine, 5000 lbs capacity, 8’x12’ deck c/w side shift.

3 1

SLX5000 1304 SLX5000M WE477

1 3

WE476 1304

SLX5000M WE477 704SL 704SL M-60

3 1 3 1 1 1

M-60 Scissorlift

4285

1 2

M-40 lift Scissor

1409

1 1

Scissorlift M-40

4285 1409

MacLean MacLean

2 1 1 2

Scissor lift B40-520

2 1

LR3-004

1 2

1 1

MacLean MacLean

LR3

B40-520 LR3-004

MacLean MacLean

Scissor Lift SL-3

4690

2 1

SL-3 xlift SL-3

40 47

12

MacLean MacLean MacLean MacLean MacLean MacLean MacLean Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte Marcotte

Marcotte Minejack

Minejack Minejack

Minejack Minejenny

LR3 Scissor Lift SL-3 SL-3

SL-3 xlift JUT-41SL

4690 40 47

JCI 704 Scissorlift, 1993, Edmonton SCISSOR LIFT, good running condition

SCISSOR LIFT, good running M-40 modified Scissor lift, Sidecondition shift, Rebuilt

M40 M40 M40 M40 M40 M40

M40 M40RL

M40RL M60

M60 RL3000

RL3000 SL4000 SL4000 EC3 EC3 Aerial

Aerial

B40-531 B40-532 B40-532 B40-534 B40-534 B40-535 B40-535 4854 4854 WE327

WE327 3160 3160 1353

Scissor Scissor

Scissorlift 600EB

600EB LIFTMAST

South Bay Teledyne

Scissor Lift LP15AR UT45A SLX4000

SLX4000 460 460

1 2 2 1 1 5 5 1 1 1 1 1 1 1

269-628-5605 705-929-9608

pillar@pillarmfg.com mallen@vianet.ca

Greg Pillar Scott Pillar

269-628-5605 269-628-5605

pillar@pillarmfg.com pillar@pillarmfg.com

Mark Pillar Allen Greg

Contact Scott Pillar Mike Castron

Mike Castron Randy Size

Randy Size Tim McDowell

Tim McDowell Frank Crites Frank Crites Martin Short

Martin Short Short Martin Martin Short Short Martin MartinLevin Short Mark

Mark Alexander Levin Mark

Mark Alexander Randy Size Randy Size É ric Packwood

M-40 modified Scissor Mercedes lift, Side shift, Rebuilt Scissor lift w/sideshift, engine

Dominique Trottier Ghislain Grondin

Scissor lift w/sideshift, Mercedes engine MACLEAN SCISSOR LIFT

MACLEAN NEW Unit - SCISSOR Boom Lift, LIFT 6m deck lift, 8000lb capacity, 8x12' deck, Merc 906, Enclosed Cab

NEW Unit Lift,Scissor 6m deck lift, 8000lb capacity, 8x12' deck, Merc 906, Enclosed Cab Good Used- Boom MacLean Lifts., Standard equipped Good UsedSL-3 MacLean Scissor Lifts., Standard equipped MacLean Scissorlift 2009 used

MacLean SL-3 SL3 Scissorlift 2008 MacLean Scissor2009 lifts 1used reconditioned and certified unit, c/w with side shift, powered by Mercedes

2008 MacLean SL3 deck Scissor lifts 1 reconditioned and certified c/wtowith side shift, powered by Mercedes Scissor truck, 8x12 w/sideshift, Mercedes engine, Unit isunit, ready work!! ScissorF6L912W, truck, 8x12 deck w/sideshift, Mercedes engine, Unit iscore ready work!! Deutz One in excellent condition, other is running for to refurbishment or parts

Deutz F6L912W, One inFord excellent other is running Scissor lift, powershift, Axles,condition, F6L912 W Deutz engine core for refurbishment or parts

M40 Modified, Modified 8x10 deck, 11-380 Deutz F6L912W Clark HR18000 Clark CF2261 CNH D64 Refurbished M40 narrow vein, 11-385 Deutz F6L912W Clark HR18000 Clark CF2261 CNH D64 axle MARCOTTE M40 M40 SCISSORLIFT SCISSORLIFT(HIAB) MARCOTTE REBUILT DEUTZ POWER SOLID ARM SIDE SHIFT

MARCOTTE M40 M40 SCISSORLIFT SCISSORLIFT REBUILT REBUILT DEUTZ POWER SOLID ARM SIDE SHIFT MARCOTTE MARCOTTE M40 M40 SCISSORLIFT SCISSORLIFT REBUILT MARCOTTE

MARCOTTE M40 4000 SCISSORLIFT Marcotte M40RL, scissordeck bolter, 2012

Marcotte M40RL, 4000 scissordeck bolter,C5000 2012 Front D65 Rear JD1200 Rebuilt Deutz BF6M1013CP Clark R32000 Clark

Ghislain Grondin Kevin McDowell KevinStern McDowell Dan Dan Stern Mark Allen

Mark Allen Randy Size

Randy Size Mike Castron

Mike Castron Castron Mike Mike Castron Mark Levin Mark Levin Frank Crites

Frank Crites Martin Short

Martin Short Short Martin

MartinMcDowell Short Kevin

Kevin McDowell McDowell Kevin Kevin McDowell McDowell Kevin Kevin McDowell McDowell Kevin Kevin McDowell Randy Size Randy Short Size Martin

DeutzM40, BF6M1013CP Clark R32000 D65 Rear JD1200 Martin Short Used RL3000 Scissor Lift, UnitClark 3160,C5000 DeutzFront BF4M1013 liquid cooledRebuilt diesel engine, 32000 series powershift Sandy Baril

Used M40,Sl4000 RL3000 Scissor Lift Lift, Unit 3160, Deutz BF4M1013 liquid cooled diesel engine, 32000 series powershift Jeannot Sandy Baril Marcotte , Scissor Courchesne

705-929-9608 269-628-5605

Telephone 269-628-5605 705-693-9870 705-693-9870 780-469-5677

780-469-5677 1-602-885-6560

1-602-885-6560 807-221-4670 807-221-4670 705-682-2084 705-682-2084 705-682-2084 705-682-2084 705-682-2084 705-682-2084 303.567.4174 303.567.4174 705-671-2100

705-671-2100 780-469-5677 780-469-5677 418-872-0600 418-872-0600 819-279-5860 819-279-5860 819-825-6222 819-825-6222 705-566-8190

303.567.4174 807-221-4670

807-221-4670 705-682-2084 705-682-2084 705-682-2084 705-682-2084 705-566-8190 705-566-8190 705-566-8190 705-566-8190 705-566-8190 705-566-8190 705-566-8190 705-566-8190 780-469-5677 780-469-5677 705-682-2084 705-682-2084 705-566-5030 705-566-5030 705-857-2154

(1) Minejack2,000lbs Aerial Scissorlift 18’ Lift Minejenny, Scissor Lift

Tim McDowell Hugh Munro

1-602-885-6560 705-682-2084

4808 4737

2 1

4738

14-1279, 14

14-1279, 14

1361 B50-517

B50-517 4858 4858 B40-541

B40-541

Hugh Munro Randy Size

Normet Scissor Scissor platform deck cassette Normet only (x2)

Randy Size Size Randy

1 2

NormetScissorlift Scissor platform only only) Toyota (x2) (Platforms

1 3

RDH Scissor Lift Battery powered machine, low hours, s/n 1367, to Go LIFTMASTER 600R, SCISSOR LIFT, good running condition, 369, Ready 1477 and 1198 Hours

2 1

Toyota Scissorlift (x2) (Platforms only) RDH Scissor Lift Battery powered machine, low hours, s/n 1367, Ready to Go

Randy Size Size Randy

Randy Size Jeannot Courchesne

Jeannot Courchesne É ric Packwood

mshort@waldenequipment.ca mshort@waldenequipment.ca mshort@waldenequipment.ca mshort@waldenequipment.ca mshort@waldenequipment.ca mark.levin@minenv.com mark.levin@minenv.com mark@minesource.com mark@minesource.com rsize@amt-inc.ca

rsize@amt-inc.ca Eric.Packwood@ebcinc.com

Eric.Packwood@ebcinc.com jdtrottier@hotmail.com jdtrottier@hotmail.com ggrondin@em2000.ca

ggrondin@em2000.ca kevin_m@bmcdowell.com

705-566-8190 1-602-885-6560 705-682-2084 780-469-5677 780-469-5677 780-469-5677 780-469-5677 780-469-5677 780-469-5677 705-857-2154 705-857-2154 418-872-0600

rsize@amt-inc.ca MikeC@cardinalmining.com

MikeC@cardinalmining.com mark.levin@minenv.com mark.levin@minenv.com sales@resequip.com

sales@resequip.com mshort@waldenequipment.ca

mshort@waldenequipment.ca mshort@waldenequipment.ca mshort@waldenequipment.ca kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com rsize@amt-inc.ca

rsize@amt-inc.ca mshort@waldenequipment.ca

mshort@waldenequipment.ca info@mar-inc.com

info@mar-inc.com sales@rdhminingequipment.com

sales@rdhminingequipment.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com tim@mcdowellequipment.com

tim@mcdowellequipment.com hmunro@waldenequipment.ca

hmunro@waldenequipment.ca rsize@amt-inc.ca rsize@amt-inc.ca rsize@amt-inc.ca rsize@amt-inc.ca rsize@amt-inc.ca

rsize@amt-inc.ca sales@rdhminingequipment.com

sales@rdhminingequipment.com Eric.Packwood@ebcinc.com

3 1

LIFTMASTER 600R, SCISSOR LIFT, good running 1477Clark and 1198 Hours 8 x 12 Bay deckDesign with 6,000 lbs cap., sidedeck, shift,Deutz 4 xcondition, 48” stroke369, stabilizers, Remote tram from deck, Mercedes South Scissor lift, 8 +/x 1224” slide F6L914 engine, axles failsafe brakes

Éric Packwood Ricky Lemieux Doug Edmondson

418-872-0600 705-692-7625 705-682-0687

Eric.Packwood@ebcinc.com ricky@rock-tech.net Doug@southbaydesign.ca

2 1

(2) Canopy, power shift,slide deck, F6L914 BTI2008 LP15AR , Teledyne Scissor Lift

Tim McDowell Jeannot Courchesne

1-602-885-6560 705-857-2154

tim@mcdowellequipment.com sales@rdhminingequipment.com

1 2 1361

Minejenny, 2,000lbs Lift(x2) Normet Scissor deckScissor cassette

sales@resequip.com mshort@waldenequipment.ca

MikeC@cardinalmining.com MikeC@cardinalmining.com

705-693-9870 303.567.4174

1 1 1 2

tim@mcdowellequipment.com sales@resequip.com

705-693-9870 705-693-9870

WE063

Kevin McDowell Tim McDowell

rsize@amt-inc.ca tim@mcdowellequipment.com

mallen@vianet.ca rsize@amt-inc.ca

780-469-5677 705-693-9870

705-857-2154 705-566-8190

MINEJACK SCISSORLIFT (1) MinejackEC3 Aerial Scissorlift 18’ Lift

MikeC@cardinalmining.com rsize@amt-inc.ca

705-929-9608 780-469-5677

Jeannot Courchesne Kevin McDowell

1 1

E-mail pillar@pillarmfg.com MikeC@cardinalmining.com

705-445-5707 x256 mallen@vianet.ca dstern@macleanengineering.com 705-929-9608

Marcotte Sl4000 , Scissor Lift MINEJACK EC3 SCISSORLIFT

B40-503

mallen@vianet.ca pillar@pillarmfg.com

705-566-8190 x256 dstern@macleanengineering.com kevin_m@bmcdowell.com 705-445-5707

1 1

1353 B40-503

8 x 1244Lift MUKI Scissor LP15AR UT45A

1 1

Greg Allen Pillar Mark

Éric Packwood Dominique Trottier

M40 Modified,M40 narrow vein, 11-385 Deutz F6L912W Clark HR18000 Clark CF2261 CNH D64 axle MARCOTTE SCISSORLIFT(HIAB)

LIFTMAST Titanium 8 x 12

Young

JCI 704 M-60Scissorlift, Scissor Lift, Deutz 6 cyl, Clark Power Shift Transmission, ROPS, New Tires, ready to work JCI 1993, Edmonton

1 1

RDH Bay Rock-tech South

Walden Young

Narrow vein scissorlift, needs6 refurbished JCI M-60 Scissor Lift, Deutz cyl, Clark Power Shift Transmission, ROPS, New Tires, ready to work

WE385 B40-531

WE380 WE385

4737 4738

Wagner Walden

Mercedes 904 engine, Clark transmission, CNH D65I axles, 8 x 10 deck Narrow vein scissorlift, needsT20000 refurbished

M40 M40

M40 M40

Scissor Scissorlift

Teledyne Wagner

Mercedes 904 904 engine, engine, Clark Clark T20000 T20000 transmission, transmission, CNH DANAD65I axles, 8 x 10 Mercedes axles, 8 xdeck 10 deck

Scissor lift, powershift, Ford Axles, F6L912 W Deutz engine M40 Modified 8x10 deck, 11-380 Deutz F6L912W Clark HR18000 Clark CF2261 CNH D64 Refurbished

Normet Platolift

South Bay Bay Resemine South

Mercedes 904 904 engine, engine, Clark Clark T20000 T20000 transmission, transmission, DANA DANA axles, axles 8 x 10 deck Mercedes

1 1

WE063 4808

RDH RDH

Scissor lift,904 (built in 2012, lowT20000 hours) Deutz D914L06 engine, 5000 lbs capacity, 8’x12’ deck c/w side shift. Mercedes engine, Clark transmission, DANA axles

WE380

Scissor

Platolift RDH

1 2

Getman A64A64 Scissor deck, 2013, 2012,8x12 Edmonton (1) Getman Scissorlift, 12’ height, deck, Deutz engine. 5300 hours

M40 M40

Minejenny Normet Normet Normet

12

2 1

JUT-41SL M40

Scissor Lifts

GETMANA-64 A-64/PL14 LIFT CARRIER Getman Scissor SCISSOR Truck, Completely rebuilt, New 914 Engine, New Ford axles, Rebuilt Clark Transmission,

1 3

1 3

SLX4100 SLX5000

Genie Lift,A-64/PL14 Model AWP24, 24’ LiftLIFT height, 300 pound capacity, operates on 110 volt. GETMAN SCISSOR CARRIER

Qut. Description 1 Getman Getman A-64 Scissor Scissor Lift, Truck, Completely rebuilt, New equipment. 914 Engine,This Newunit Ford axles, Clark Transmission, 1 A-64 complete with all standard is for SaleRebuilt or Rent.

WE476

SLX5000D SLX4100

EIMCOLift, 975Model SCISSOR LIFT Genie AWP24, 24’ Lift height, 300 pound capacity, operates on 110 volt.

South Bay DesignMuki Scissor lift, Montabert 8 x 12 slideHC50 deck,drifter Deutz F6L914 engine, Clark axles failsafe brakes 1New Resemin FFshift,slide c/w (2) 2008 Canopy, power deck, F6L914

1 1

BTI LP15AR , Teledyne Scissor Lift WAGNER UT45A 3'X6'SCISSOR

1 1

Walden SLX4000 Scissorlift, YOUNG 460 SCISSOR HIGH2011 LIFT 160",914 460-0285L SOLID ARM

1 1 1

Qut

WAGNER UT45A Scissorlift, 3'X6'SCISSOR Walden SLX4000 2011

YOUNG 460 SCISSOR HIGH LIFT 160",914 460-0285L SOLID ARM

ANFO LOADERS ANFO LOADERS

DougMcDowell Edmondson Ricky Lemieux Tim

705-682-0687 705-692-7625 1-602-885-6560

Jeannot Courchesne Kevin McDowell

705-857-2154 705-566-8190

RandyMcDowell Size Kevin

780-469-5677 705-566-8190

Kevin McDowell Randy Size Kevin McDowell

705-566-8190 780-469-5677 705-566-8190

Doug@southbaydesign.ca ricky@rock-tech.net tim@mcdowellequipment.com

sales@rdhminingequipment.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com rsize@amt-inc.ca rsize@amt-inc.ca kevin_m@bmcdowell.com

kevin_m@bmcdowell.com


Young

460

1

B40-541

YOUNG 460 SCISSOR HIGH LIFT 160",914 460-0285L SOLID ARM

Anfo ANFO LOADERS

The Mining Equipment Prospector p.13 Make Make

Anfo Pot

Model Model

Skid mount

BTI

S/N# Serial

Qut Description: Qut. Description

B60-508

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Loaders Contact Contact:

Telephone Telephone:

E-mail e-mail:

1

(1)New Skid mount anfo pot 750LB pot

1

BTI ALBT-15 ANFO LOADER,CAB,BFM1013C, 2 X 1000LB TANKS,CLARK,D65

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Getman

A64

1

GETMAN A-64 ANFO CARRIER

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

1

GETMAN A-64 ANFO BOOM TRUCK, C/W BOOM

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

1

GETMAN A-64 ANFO STOW BOOM

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

1

Getman A64 Emulsion Anfo Charger, 2013, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

R42

1

GETMAN R-42 ANFO CRUISER

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Maclean

Anfo

1

Maclean Anfo Loader, dual 500lb tanks, Mercedes engine

Mike Deziel

705-966-2505

dezielrepairsinc@bellnet.ca

Marcotte

Anfo

1

Scissor Lift / Anfo, 1000# Vesel, power shift, Deutz engine

Frank Crites

807-221-4670

sales@resequip.com

Marcotte

M40

1

Overhaul 2012, Scissor Manlift and tank. Good condition 500 hours

Warren Cayen

705-692-2204 x

WCayen@technicagroup.com

Marcotte

Anfo

1

Marcotte, Anfo Loader With New Anfo System With Dual 500 Lb Tanks With 800 Lb Capacity Basket

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Marcotte

Anfo

1

(1) Marcotte Anfo loader! 750LB pot

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Marcotte

Anfo loader

1

(1) Refurbished, Marcotte scissor lift/Anfo loader, mid 1990’s

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Normet

Anfo loader B60-502

1

NORMET ANFO LOADER with man basket,F6L912,P/S,750LB TANK

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

Anfo Truck

1

Cat power, dual ANFO pots, enclosed cab

Mark Levin

303.567.4174

mark.levin@minenv.com

Normet

Emulsion

4809

1

Normet Emulsion cassette with pot

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

Charmec

4812

1

Normet Charmec and platform 1995 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

Charmec

9984

1

Normet Charmec MC605B 2010, Ireland

Randy Size

780-469-5677

rsize@amt-inc.ca

Penberthy

Hole

5

Penberthy 1 bag Blast Hole Charger $275.00 Cnd. each

Frank Crites

807-221-4670

sales@resequip.com

Make Make

4906

1347

Model Model

Atlas Copco

ECM-720

S/N# Serial

Atlas Copco

T4BH

8726

Furukawa

OPEN PIT

Qut. Description Qut Description:

Open Pit Contact Contact:

Telephone Telephone:

E-mail e-mail:

1

2009 rock drill, AC200 drifter for T-WIZ 3 rods, 480CFM/150PSI, p/b CAT C11

1

2009 Blasthole drill, 1250CFM/350PSI, 30 ft. drill rods

Merle Hoover

570-966-7312

info@ewdrilling.com

HCR1500E 12375

1

2013 rock drill, Dust Collector, p/b CAT C9

Merle Hoover

570-966-7312

info@ewdrilling.com

Hitachi

EX-150

1

Low hours, quick detach bucket, aux hydraulics on stick, thumb, cab and side guards, forestry armor plate

Mark Levin

303.567.4174

mark.levin@minenv.com

Ingersoll Rand

ECM-350

S-4087

1

Rock Drilling package w/ VL-140 Drifter, good working order

Merle Hoover

570-966-7312

info@ewdrilling.com

Komatsu

WD600

4307

1

Komatsu WD600 Wheel Dozer, 2001

Randy Size

780-469-5677

rsize@amt-inc.ca

Make Make

Model Model

S/N# Serial

Contact Contact:

Telephone Telephone:

Air Tuggers

any

Air Winch

WA220

Merle Hoover

570-966-7312

info@ewdrilling.com

Mine Hoists, Slushers, Tuggers

Air Tuggers

Atlas Copco

Qut. Description Qut Description:

MINE HOISTS, SLUSHERS, TUGGERS

Assortment of Air Tuggers

Frank Crites

807-221-4670

E-mail e-mail:

sales@resequip.com

Various sizes models

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

1

NEW 22,000 lbs full drum linepull air winch. This WA220 air winch is in stock and ready to go.

Frank Crites

807-221-4670

sales@resequip.com

B175-5002

1

ATLAS COPCO 1 DRUM AIR WINCH

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

ATP

Tensioner

B175-5006

2

ATP HYRAULIC WINCH@TENSIONER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Beebe

4000P65

MA11222

1

6,100 lb

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Beebe

FA5

A1050491

1

11,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Bertram-

Electric

1

Bertram-Nordberg 12’ Double Drum 2500hp Electric Hoist 60,000lb Line pull

Mike Deziel

705-966-2505

dezielrepairsinc@bellnet.ca

C.I.R

5 ft Double

1

C.I.R 5 ft Double Drum Hoist, 250HP, 550v, 14,000 rope pull, skid mounted

Mark Alexander

705-671-2100

mark@minesource.com

B181-0005

2

CAGE NEW 63"X62"12 MAN,4000LBS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Cage Eimco

201M906

20113109

1

4,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Eimco

3500P115.24 A 297 511 SP

1

4,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

1

Fullerton, Hodgart and Barclay 14’ Double Drum 2500hp Electric Hoist 70,000lb Line pull

Mike Deziel

705-966-2505

dezielrepairsinc@bellnet.ca

1

GARDNER DENVER WINCH

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

9

Numerous GD Tuggers of various sizes (HM, HB, others)

Mark Levin

303.567.4174

mark.levin@minenv.com

2

2,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Fullerton

Electric

B175-5004

Gardner Denver Gardner Denver

Air Tuggers

Gardner Denver

HK-12

1392 679687


Eimco Eimco

The Mining

Fullerton

201M906

20113109

3500P115.24 A 297 511 SP Equipment Prospector

Electric

Make Gardner Denver Model

S/N B175-5004

1

4,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

1

4,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

1

Fullerton, Hodgart and Barclay 14’ Double Drum 2500hp Electric Hoist 70,000lb Line pull

Mike Deziel

705-966-2505

dezielrepairsinc@bellnet.ca

9

Numerous GD Tuggers of various sizes (HM, HB, others)

Mark Levin

303.567.4174

mark.levin@minenv.com

2

2,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

p.14

Mine Hoists, Slushers, Tuggers

Qut. 1 Description GARDNER DENVER WINCH

Contact Kevin McDowell

Telephone 705-566-8190

E-mail kevin_m@bmcdowell.com

Gardner Denver

Air Tuggers

Gardner Denver

HK-12

Gardner Denver

HM 2500

1

2500lbs Air Tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Gardner Denver

Slushers

8

Numerous GD air and electric Slushers of various sizes

Mark Levin

303.567.4174

mark.levin@minenv.com

2

Hagglund Winch x 2

Randy Size

780-469-5677

rsize@amt-inc.ca

3

Hydraulic power packs

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

1

AIR TUGGER WINCH IR D6U

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

7

3 x D-6U, D-6EUL +other IR air tuggers of various sizes

Mark Levin

303.567.4174

mark.levin@minenv.com

Ingersoll Rand Air Tugger all sizes

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

1

1,000 lb Air tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Hagglund Hydraulic

1392 679687

4147 power pack WE443 B175-5016

Ingersoll Rand Ingersoll Rand

Air Tuggers

Ingersoll Rand

Air tuggers

Ingersoll Rand

BU7A

Ingersoll Rand

D6U

2

1,000lbs Air tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Ingersoll Rand

EU

6

Rebuilt Ingersoll Rand EU Tuggers

Fred Delabbio

705-560-3705

info@nelmaco.com

Ingersoll Rand

EU

EU002104

1

2,000 lb, Air Tuggers

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

EUL

C16771

6

2,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

FA2

1

5600 lbs Air Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Ingersoll Rand

FA2

2

4,000 lb, Air Winch

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

FA2.5

1

Ingersoll Rand FA2

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Ingersoll Rand

FA2B

3

4,000 lb Air Tuggers

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

FA5

1

Ingersoll Rand FA5 10,000lbs air tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Ingersoll Rand

FA5A

1

10,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

FA7

3

Ingersoll Rand FA7 15,000lbs air tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Ingersoll Rand

FA7T-42

5

used, I.R. Model:FA7T-42 Tuggers,stow 4,700' of 3/4 cable,C/W auto brakes,drum dogs, fleeting sheaves,etc

Serge Harrison

514-386-7507

portkent@live.com

Ingersoll Rand

H4UL

1

Ingersoll Rand H4UL Long drum

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Ingersoll Rand

HU

3

Rebuilt Ingersoll Rand Tuggers HU model, single drum 2,500 lbs. pull

Fred Delabbio

705-560-3705

info@nelmaco.com

Ingersoll Rand

HU

40635

3

2,500 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

HU40

28838

1

4,000 lb Air Tuggers

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

HU40A

MW008330

4

4,000 lb Air Tuggers

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

HUL

1319

1

2,500 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

K4U

1

Ingersoll Rand K4U Air tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Ingersoll Rand

K5U

1

5,000 lb Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Ingersoll Rand

Slusher

3

3 - I.R. air slusher, 30 h.p., 2 drum, 1 unit is ready to go

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Ingersoll Rand

Slushers

11 Numerous 2 and 3 drum slushers, pneumatic and electric

Mark Levin

303.567.4174

mark.levin@minenv.com

Ingersoll Rand

UW50A30

2

12,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Jeamar

3

100,000 lbs A frames

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

2

GP130-1-10E electric lifting winch, For sale or rent.

Frank Crites

807-221-4670

sales@resequip.com

BU010870

A1990797 MW007079 MW003815

RTG71586

V12594

Jeamar

A1000.5

1

1000 lbs air winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

E2500TDD

1

2,500 lbs electric winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

E3000TGD

1

3,000 lbs electric winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

E70000

WE346

4

Jeamar 70,000 lbs Electric Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

E85000

WE450

4

Jeamar 85,000lbs Electric Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

GP 375

WE210

1

Jeamar GP 375 - 37,500lbs Electric Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

GP58000-1 WE454

4

GP 58000 - 58,000lbs Electric Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jeamar

Stage

2

4- 70,000 lbs. capacity

Martin Short

705-682-2084

mshort@waldenequipment.ca

B175-5001

1

JOY AIR HOIST, 26000LB PULL

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B2F 311

1

Electric Slusher, 3-Drum, 15HP

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

1

Joy 16000lbs air tugger long drum

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

1

8,700 lb

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

JOY JOY

3-Drum

JOY

AF-111

JOY

AF-111

31322


B175-5001

1

JOY AIR HOIST, 26000LB PULL

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B2F 311

1

Electric Slusher, 3-Drum, 15HP

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

1

Joy 16000lbs air tugger long drum

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

31322

1

8,700 lb

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

AF-312

B180-5017

1

JOY AF-312 3 DRUM 30

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JOY

AW80

WE431

2

1,000lbs Air tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

JOY

B2F311

B180-5010

4

JOY B2F311 ELECTR. SLUSHER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JOY

C2FG212

2

60 HP Slusher

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY

Slusher

2

JOY AF-212 slushers, new or rebuilt, double drum 4130 lbs pull

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY

Slusher

1

Joy electric Slusher 2/3 drums

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

JOY

Slusher

2

JOY AF-312 slusher, rebuilt, triple drum 4950 lbs pull

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY

Slusher

1

JOY FF-211 slushers, new or rebuilt, double drum 2400 lbs pull

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY

Slushers

6

Several air and electric slushers, 5 to 15 HP

Mark Levin

303.567.4174

mark.levin@minenv.com

JOY

Tugger

1

EW-111 Rebuilt, single drum, 2200 lbs pull

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY

Tugger

1

LF-113 Rebuilt, single drum, 3100 lbs pull

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY

Tugger

1

AF-111 Rebuilt, single drum, 10,400 lbs pull

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY

winch

1

Aw-80 Rebuilt, single drum, 1,000 lbs pull

Fred Delabbio

705-560-3705

info@nelmaco.com

Krantech

KTN281QQ B175-5010

1

KRANTECH KTN281QQ HYD. WINCH

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

1

150 HP, 360 fpm, 11,000 # line pull, 48 dia. x 21 inch wide drum, 11 inch ange height. Lilly model C.

Mark Levin

303.567.4174

mark.levin@minenv.com

1

Hydraulic Winches, Electric Winches, Air Tuggers, Air Winches, Slushers

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Pickrose

2

Pickrose winches, rebuilt

Fred Delabbio

705-560-3705

info@nelmaco.com

Pickrose

1

8,000lbs air tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

2

6,600 lb. Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

3

6 inch rebuilt swivel hook and eyebolt 6000 lbs cap,

Fred Delabbio

705-560-3705

info@nelmaco.com

JOY JOY

3-Drum

JOY

AF-111

JOY

AF-111

JOY

Mb Wild Hoist 48 x 21 Numerous

B175-5009

San Ei Seiki Sheave

W-30-36LAC-MB

1362354,

Lemac

Skip

B181-0002

1

SKIP NEW 62"X63"X10',5YD

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Skip

B181-0003

2

SKIP NEW 63"X62"X10'APPROX 5YD

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Assortment of Air & Electric Slushers

Frank Crites

807-221-4670

sales@resequip.com

All makes and models of 2 - 3 drum slushers, air or electric, available as rebuilt, rental and in for repairs

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Slushers Slushers

all

Tensioner

T100

1

10000lbs tensioner

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Thern

MTA11-13- 1515-82637

1

2,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Thern

TA2

1509-48075

1

5,700 lb Air Tuggers

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Thern

TA2.5

1510-53548

4

5,900 lb, Air Tugger year 2010 and 2015

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Thern

TA2P

1510-55672

1

3,600 lb Air Tuggers

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Thern

TA5-24AX1 1507-35995

2

14,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Thern

TA5P

1512-65533

1

8,400 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Thern

TA7

1511-59124

1

19,000 lb, Air Tugger

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

1

36 inch Hoist

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

8

Timberland GP 120 - 30,000lbs Electric

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Timberland Timberland

GP 120

Timberland

GP 200

7

GP 200 - 30000lbs Electric Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Timberland

Man Riding

1

1- 2,000 lbs. capacity

Martin Short

705-682-2084

mshort@waldenequipment.ca

Timberland

PH 110

2

e gress hoist

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Timberland

SW-9

1

E gress hoist, Manhoist

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Timberland

SSK200

1

SSK 200 - 20000lbs Electric Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

5

Various makes and models

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Tuggers

WE365

WE360

Tuggers

All sizes,

1000-20,000 lbs. line pull, rebuit to like new cond. , test certi. and warranty included, air and electric slushers, all

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Tuggers

all

Tuggers - All sizes ranging from 1000 lb. to 20,000 lb. line pull

Mark Garofolo

705-693-7900

markg@regmining.com

Tuggers

Slushers

Pneumatic Tuggers and Slushers - 5-30 hp.

Mark Allen

705-929-9608

mallen@vianet.ca

Winches

All sizes &

Winches Tuggers & Hoists, Electric Air or Hydraulic 1000 to 75000 LBS sales or rentals

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Wintech

B01-0271

1

6000lbs air winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Wintech

BA4000-45

1

Wintech 4000lbs Air Tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Wintech

1

The bullwheel Mining Equipment Prospector p.15 2 60,000 lbs Bullwheel tensioner with up to 3.125 inch rope


Tuggers

Slushers

Winches

All sizes &

Wintech

B01-0271

1

Pneumatic Tuggers and Slushers - 5-30 hp.

Mark Allen

705-929-9608

mallen@vianet.ca

Winches Tuggers & Hoists, Electric Air or Hydraulic 1000 to 75000 LBS sales or rentals

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

1

6000lbs air winch

Hugh Munro

Contact Hugh Munro

705-682-2084

Telephone 705-682-2084

hmunro@waldenequipment.ca

The Mining Equipment Prospector p. 16 S/N

Mine Hoists, Slushers, Tuggers

Make Wintech

Model BA4000-45

Qut. Description 1 Wintech 4000lbs Air Tugger

Wintech

bullwheel

2

60,000 lbs Bullwheel tensioner with up to 3.125 inch rope

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Wintech

bullwheel

1

40,000 lbs Bullwheel Tensioner with up to 2 1/2 inch rope

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Wintech

CP 12000

2

Wintech CP 12000

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Wintech

HW12000

1

12000lbs Hydraulic Winch

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Yellowstone

CJQH 50

3

Yellowstone 11,000 lbs Air tugger

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Make

Model

Contact

Telephone

WE006

E-mail hmunro@waldenequipment.ca

Compressors and Fans

Make ABC

Model

S/N

Serial #

Qut. Description Qut

Description:

COMPRESSORS AND FANS

90 50' Lengths ABC Mine Ventilation Ducting, 15 - 48 inch dia.

Contact:

Barry Paccagnan

E-mail

Telephone:

e-mail:

604-534-5313

sales@nelsonmachinery.com

ABC

Fan

1

MODEL VADS-48F21-15-A75, 48" ABC Mine Ventilation Package, 50,000 CFM

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

ABC

Mine Vent

2

42” Dia, Full Bladed, Adj. Pitch. 75HP, 575V, 1775 RPM WEG Motors. Fan Silencers and Reducers Available.

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

ABC / Alphair

mine fans

24 to 42 inch - 10 to 75 hp. Fans, Silencers, Reducers

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

Alphair

30 inch

B90-555

1

ALPHAIR 3000 30" VENTILATION 64093A01

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Alphair

34 inch

B90-554

1

ALPHAIR 34" VENTILATION

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Alphair

36 inch

B90-521

1

JETSTREAM ALPHAIR 36" FAN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Alphair

45

1

45 inch Alphair Series 1000,4 5-17-1770 Fan, 10HP, 575V

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Alphair

60 hp

2

60 inch Alphair Fans, 60HP, 575V, 70,000CFM, 1200RPM

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Alphair

60 Hp

4271

1

Alphair Fan, 60 Hp

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

GA30

AII322071

1

174 CFM Electric Compressor, 40 HP, 575V 3-Phase

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Cogemacoustic

B90-526

2

COGEMACOUSTIC 2XFANS+2SILENCER 355 KW

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Cogemacoustic

B90-527

1

COGEMACOUSTIC 1XFAN,2XSILENCER 355 KW

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Cogemacoustic

B90-528

1

COGEMACOUSTIC T2 TUNNEL FAN 355 KW

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Cogemacoustic

42 inch

B90-529

1

COGEMACOUSTIC T2.160.3,42" FAN 355 KW

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

G.E.

24 inch

B90-517

2

G.E. 24 inch FAN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

G.E.

44 inch

B90-522

1

G.E. 44 inch FAN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Gardner

D825

8003650

1

825CFM/150PSI Air Compressor p/b CAT 3306B

Merle Hoover

570-966-7312

info@ewdrilling.com

Gardner

J SERIES

1

J SERIES 302JHY2003, 1500 PSI Booster

Merle Hoover

570-966-7312

info@ewdrilling.com

Howden

45 inch

B90-523

1

HOWDEN BUFFALO AXIVANE 45" FAN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

4267

1

Howden Buffalo Fan, 50 Hp

Randy Size

780-469-5677

rsize@amt-inc.ca

416080

1

Air Compressor, Skidded, p/b CAT C-15

Merle Hoover

570-966-7312

info@ewdrilling.com

Howden Ingersoll Rand

1170 cfm /

Ingersoll Rand

375

1

Trailer Mounted air compressors, 125 psi, with Cummins or John Deere power, low hours

Mark Levin

303.567.4174

mark.levin@minenv.com

Ingersoll Rand

825

1

Cummins Diesel, low hours, fastrack

Mark Levin

303.567.4174

mark.levin@minenv.com

Ingersoll Rand

P1600WCU

1

Trailer Mounted air compressor, 100 psi, Cummins power, recently purchased from United Rentals fleet

Mark Levin

303.567.4174

mark.levin@minenv.com

Ingersoll Rand

VHP400W

1

400CFM/200 PSI Air Compressor p/b 5.9 Cummins

Merle Hoover

570-966-7312

info@ewdrilling.com

Jetair

E-3100-A

1

Jet Air Axiflow fan, voltage 460, 3 phase, 3550 rpm, 100 HP, 60 Cycle

Andy Pavlisick

970-872-3894

highc@paonia.com

Jetair

VAD-30F21

1

Jet Air Axiflow fan, model VAD-30F21-13-M40, voltage 460, 3 phase, 3600 rpm, 60 HP, 60 Cycle

Andy Pavlisick

970-872-3894

highc@paonia.com

JOY

21 inch

1

JOY 15 HP,440V, 21",3450RPM FAN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JOY

38-21-1770

2

Joy Fan 37.5 HP, 480V

Mark Levin

303.567.4174

mark.levin@minenv.com

JOY

48-260

1

Joy Fan 50 HP, 480V

Mark Levin

303.567.4174

mark.levin@minenv.com

JOY

Fans

1

Joy Fans - 25-30-50-75 HP.

Mark Allen

705-929-9608

mallen@vianet.ca

JOY

ventilation

84-30-1170

4

250 hp. SR2000 axial vent fans, variable pitch in motion, 150,000 CFM @ inch S.P.

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

JOY

WB-12

97-2-01

1

High Pressure Air Booster, p/b CAT 3406C

Merle Hoover

570-966-7312

info@ewdrilling.com

Joy / Wood

ventilation

All major makes. Rebuilt like new cond. c/w one year warranty & test certificates of the full load amp., vibration

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphair

Vent fans

1

600HP, Mine duty axial fran 4160/60/3, 180,000 CFM@ 14 inch 5.P wq each arr#8

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphair

Vent fans

11 800HP, Mine duty axial fran arr # 4 4160/60/3, 300,000 CFM@ 12 inch 5.P wq each

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphmir

Vent fans

84-43-1200

3

500 HP, mine duty axial vent from 4160/60/3, 250,000 CFM @ 8 inch 5.P. wq each arr #4

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphmir

Vent fans

90-50-880

1

350 HP, mine duty axial vent from 4160/60/3, 225,000 CFM @ 6 inch 5.P. wq arr#4

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

31815ULK42

B90-501


Joy / Alphair

Vent fans

1

600HP, Mine duty axial fran 4160/60/3, 180,000 CFM@ 14 inch 5.P wq each arr#8

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphair

Vent fans

11 800HP, Mine duty axial fran arr # 4 4160/60/3, 300,000 CFM@ 12 inch 5.P wq each

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphmir

Vent fans

84-43-1200

3

500 HP, mine duty axial vent from 4160/60/3, 250,000 CFM @ 8 inch 5.P. wq each arr #4

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphmir

Vent fans

90-50-880

1

350 HP, mine duty axial vent from 4160/60/3, 225,000 CFM @ 6 inch 5.P. wq arr#4

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Joy / Alphmir

Vent fans

120-65-710

1

650 HP, mine duty axial vent from 4160/60/3, 400,000 CFM @ 7 inch 5.P. wq each arr#8

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Korfman

B90-531

1

KORFMANN FAN SILENCER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Korfman

B90-553

1

KORFMAN AXIAL FLOW DIN EN 60034-1 1190

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B90-530

1

KORFMAN ESN9750,63"FAN+SILENCE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Korfman

63 inch

Leroi

185 cfm

1

LeRoi 185 CFM Portable Air Compressor

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Leroi

WE150

1

750 CFM, 150 HP, 125 psi, skidmounted compressor, 480V, low hours

Mark Levin

303.567.4174

mark.levin@minenv.com

Mine Fans

misc

Mark Levin

303.567.4174

mark.levin@minenv.com

Sheldon

45 inch

Smj Inc.

300 HP

30+ Numerous miscellaneous 480 V mine drift fans, ranging from 5 to 125 HP, call with needs. 1

SHELDON 660 45 inch FAN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

2

NEW - 300 HP low noise with silencers, model AFD 1.6 two stage, 63 inch diameter, Serial #222 & 223 -

Andy Pavlisick

970-872-3894

highc@paonia.com

Spendrup Fan 075-045

1

NEW. PERMISSIBLE. 2x60 HP in series, skidmounted with silencers and permissible control box. 480V.

Mark Levin

303.567.4174

mark.levin@minenv.com

Spendrup Fan 112-80

2

2x125 HP in series, with silencer, 480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Spendrup Fan 140-80

2

1 x 200 HP in series, with silencers, 480V, unused

Mark Levin

303.567.4174

mark.levin@minenv.com

Spendrup Fan 150-30

1

30 HP, 480V.

Mark Levin

303.567.4174

mark.levin@minenv.com

Spendrup Fan AMF-150

1

PERMISSIBLE. Skidmounted, 10 HP, with permissible control box. 480V.

Mark Levin

303.567.4174

mark.levin@minenv.com

Spendrup Fan AMF-150-5

1

PERMISSIBLE. Skidmounted, 5 HP, with permissible control box. 480V.

Mark Levin

303.567.4174

mark.levin@minenv.com

Spendrup Fan AMF-260H

4

2x10 HP in series, with and without silencers, 480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Spendrup Fan AMF-275

2

2x50 hp, 480v

Mark Levin

303.567.4174

mark.levin@minenv.com

Sullair

50hp

1

Sullair Model V120-50L/A Compressor, 50HP, 230/460V, Mfg. 2005

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Sullair

LS-25S

1

750 CFM, 150 HP, 125 psi, skidmounted enclosed compressor, 480V, low hours

Mark Levin

303.567.4174

mark.levin@minenv.com

Ventilation

Fans

Numerous Ventilation fans and parts

Randy Size

780-469-5677

rsize@amt-inc.ca

Ventilation fans - all sizes ranging from 12 to 144 inch diameter

Mark Garofolo

705-693-7900

markg@regmining.com

NEW - Fan 45 inch, 25 hp., 34,500 cfm

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

Contact Contact:

Telephone Telephone:

E-mail e-mail:

B90-524

4434, 4433,

Ventilation Fans

Alphair

1

4500VAX2

LHDs Undergound Loaders

The Mining Equipment Prospector p.17 Make Make

Model Model

S/N# Serial

Aramine

L130D

B10-622

Atlas

Qut. Description Qut Description:

LHDs UNDERGROUND LOADERS

2

ARAMINE L130D LOADER 2011 PERKINS 58 H.P. BRAKE PACKAGE 700-800 HOUR SINCE NEW

1

ARAMINE L130D LOADER 2011 PERKINS 58 H.P., 500 HOUR SINCE NEW

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Cavo 310

3

1 is READY TO GO! Cavo 310, rubber tired Mucking Machine, completely rebuilt, new tires..

Frank Crites

807-221-4670

sales@resequip.com

Atlas

Cavo 310

4

(4) Available, Atlas Copco, model Cavo 310 mucking machines, 1 unit completely reconditioned

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Atlas

Cavo 310

3

3 available, 1 disassembled for hoisting, one Cavo 310 remote unit available

Mark Levin

303.567.4174

mark.levin@minenv.com

Atlas

Cavo 320

7

3 available Cavo 320 rubber tire , air drive. .....2 available Cavo 310 rubber tire , air drive. ....2 available Cavo

Mark Garofolo

705-693-7900

markg@regmining.com

Atlas

Cavo 320

1

1 - Atlas Copco Cavo 320, rebuilt

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Atlas

LM56

1

1 - only Atlas LM56 mucking machine rebuilt.

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Atlas Copco

ST1010

1

6 yrd Loader, DDEC engine

Frank Crites

807-221-4670

sales@resequip.com

Atlas Copco

ST1010

1

Rebuilt, Atlas Copco 6 yd, 2002, model ST-1010

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Atlas Copco

ST1020

2

LHD SCOOPTRAM, good running condition, 3622 hours, 8845 hours

Éric

Packwood

418-872-0600

Eric.Packwood@ebcinc.com

Atlas Copco

ST1030

2

Atlas Copco ST-1030 Scooptram Ready to Go

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas Copco

ST1030

4

6.5 yd3 cap. Scooptrams; 2 are year 2013 and two year 2011; serials AVO12X592, AVO12X597, AVO11X121

Robinson Castro

+56 02-273 476 14

rrcastro@tie.cl

Atlas Copco

ST1030

B10-697

1

ATLAS COPCO ST1030 S AV012X188, AXLES, CUMMINS POWER, CAB

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

ST1030

4888 to 4892

5

Atlas Copco ST1030Loader , 5x 2014,

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ST14

2

8 yard capacity, loacated in Timmins ON. unit# LSG0700 & LSG1800

Mark Alexander

705-671-2100

mark@minesource.com

Atlas Copco

ST2D

3

2 yrds Scoop, Deutz 1013 engine

Frank Crites

807-221-4670

sales@resequip.com

Atlas Copco

ST2D

1

Reconditioned Atlas Copco ST2D, Ejector bucket, Deutz 1013, SAHR brakes,

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

ST2D

B10-711

1

ATLAS COPCO ST2D SCOOP High LIFT,914T3,2011R

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

ST2D

4051 4339

2

Atlas Copco ST2D Scooptram, 1997, 2010

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ST2D

1

(1) 1997 2 Yard, wet Disc, F6L912W, 1029 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Atlas Copco

ST2G

1

ATLAS COPCO ST2G, 2005,CORE, AV005X056

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Aramine

L130D

B10-620

AVOO4X006

B10-702

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com


Atlas Copco

ST2D

3

2 yrds Scoop, Deutz 1013 engine

Frank Crites

807-221-4670

sales@resequip.com

Atlas Copco

ST2D

1

Reconditioned Atlas Copco ST2D, Ejector bucket, Deutz 1013, SAHR brakes,

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

ST2D

1

ATLAS COPCO ST2D SCOOP High LIFT,914T3,2011R

Kevin McDowell

Contact Randy Size

705-566-8190

Telephone 780-469-5677

kevin_m@bmcdowell.com

Atlas Copco

ST2D

1

(1) 1997 2 Yard, wet Disc, F6L912W, 1029 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Atlas Copco

ST2G

B10-702

1

ATLAS COPCO ST2G, 2005,CORE, AV005X056

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

ST2G

4604

1

Atlas Copco ST2G Scooptram, 2005

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ST2G

1

(1) Good Used

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Atlas Copco

ST3.5

1

F8L413 Engine, 3.5 yard capacity

Frank Crites

807-221-4670

sales@resequip.com

Atlas Copco

ST3.5

2

wagner ST3.5 scooptrams, 13,200lbs capacity, 24 volt

Mark Alexander

705-671-2100

mark@minesource.com

Atlas Copco

ST3.5

2

2 x 2008 Atlas Copco ST 3.5 powered with NEW Deutz TCD914L06 ngines.

Bill Green

520-805-0739

desertdiesel@gmail.com

Atlas Copco

ST3.5

7

Atlas Copco ST3.5 Loader, 1980, 2x 1998, 2010, 2011, 2x 2012

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ST3.5

1

(1) 1994 3.5 yard,SAHR, F8L413 FW

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Atlas Copco

ST3.5

B10-708

2

ATLAS COPCO ST 3.5 2012, F8L413, ROCKTORQUE, 2011

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

ST6C

4775

1

Atlas Copco ST6C Loader 1997, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ST700

B10-693

1

Atlas Copco ST700 ,1998,DL07P0212, MERC, EOD, rocktorque

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

ST700

B10-715

1

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

ST710

1

ATLAS COPCO ST710 AVO7X444 2007,OROPS 1013 Deutz engine, 3.5 yard capacity

Frank Crites

807-221-4670

sales@resequip.com

Atlas Copco

ST710

1

Rebuilt, Atlas Copco 4 yd, 2007, model ST-710

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Atlas Copco

ST710

3

Atlas Copco ST710 Loader , 2x 2008, 1x 2004

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ST710

1

2010 excellent condition c/w Erops,air,heat, like new condition, 459 hrs

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Atlas Copco

ST710

1

2007 excellent cond. DDEC 40 series, c/w Erops, air, heat, new bucket & boom, new pins, new cab

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

R1300

B10-613

1

CAT R1300 LHD, MERC, 6QW, 3RD V, CAB

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1300

B10-653

1

CAT R1300 LOADER 2002, CAB, CAT 3306B,6QW00947

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1300

B10-699

1

CAT R1300, OROPS, 3306DI,6QW00853, ENGINE RUNS GOOD, FRONT AXLES REBUILT & OUT

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1300 SII

2

Cat C6.6, ďŹ re suppression, EOD, enclosed cab, good condition. In Elko yard.

Mark Levin

303.567.4174

mark.levin@minenv.com

CAT

R1300G

1

Caterpillar R1300G series II Loader, 2007, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1300G

3

(3)C6.6 engines,EOD Buckets, Encloseds cabs, TIER 3

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

R1600

1

Fire suppression, enclosed cab, needs rear axle rebuild. In Elko yard.

Mark Levin

303.567.4174

mark.levin@minenv.com

CAT

R1600

1

Caterpillar R1600 2008, GUATEMALA

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1600

1

(1) regular Bucket

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

R1600G

B10-625

1

CAT R1600G LOADER 2008,9YZ00418, CAB, A/C, EXCELLENT CONDITION

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1600G

B10-713

1

CAT R1600G SCOOP, 2011, CAB, 9YZ00696

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1600G

B10-716

1

CAT R1600G LOADER, OROPS, 2007 9PP00418

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1600G

4763, 4915

2

Caterpillar R1600G 1- 2007, Edmonton, 1- 2012 Timmins

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1600G

1

(1) 2012 Caterpillar R1600G Loader

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

R1600H

2

NEW THIS YEAR - AVAILABLE MARCH AND JULY 2017

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1700

2

1995 CAT Elphinstone R1700, Condition Used Reference: Unit# ST-17, ST-14

Dave Stobie

807 826 1112

dave@manroc.com

CAT

R1700 II

1

CAT R1700 II CAB, 3176B,REWIRED,RECONDITIONED, EXCELLENT CONDITION

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1700G

2

R1700G Elphinstone Underground Loaders

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

CAT

R1700G

1

2008 Caterpillar R1700G

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

CAT

R1700G

8XZ Series

1

2005 Caterpillar R1700G L0-8, s/n 8XZ Series

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

CAT

R1700G

SBR Series

1

Caterpillar R1700G, SBR Series

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

CAT

R1700G

4863

1

Caterpillar R1700G, 12016, Ontario

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1700G

4114

1

Caterpillar R1700G , 1999, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1700G

4056, 4554

2

Caterpillar R1700G (core/parts) 2011; CAT R1700 Series II (core/parts) 1996

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1700G

2

2- 2007 Caterpillar R1700G Loaders, Erops"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

R2800

1

CAT R2800 LOADER ,CAB S/N R2800-215

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R2900

1

(1) 11YRD, 1997

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

R2900G

3

Caterpillar R2900G Loaders 2x 2005 Austalia, 1x 2008 core unit Ontario, 1x 2012, 1- core, Austalia

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R2900G

1

(1) Caterpillar R2900G Loader"JLK Series, Erops"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

The Mining Equipment Prospector p.18

Make Atlas Copco

Model ST2D

B10-711

S/N 4051 4339

4555, 4646,

4082, 4175,

4789

4909

B10-614

B10-700 4362, 4736,

LHDs Undergound Loaders

Qut. Description 2 Atlas Copco ST2D Scooptram, 1997, 2010

E-mail rsize@amt-inc.ca


1

(1) 11YRD, 1997

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

3

Caterpillar R2900G Loaders 2x 2005 Austalia, 1x 2008 core unit Ontario, 1x 2012, 1- core, Austalia

Dave Erwin

780-469-5677

derwin@amt-inc.ca

R2900G

1

(1) Caterpillar R2900G Loader"JLK Series, Erops"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Eimco

115

1

1 x EJC 115 powered by a Deutz BF4M1013EC engine

Bill Green

520-805-0739

desertdiesel@gmail.com

Eimco

911

1

EIMCO 911, 1 YD,SCH 31,HYDROSTATIC,WHITE,57"WIDE,OROPS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

912

2

EIMCO 912 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

912

1

Eimco 912 LHD, rebuilt Deutz F6L 912W, dry brakes, reported to have fewer than 100 working hours

Mark Alexander

705-671-2100

mark@minesource.com

Eimco

912

1

EIMCO 912, 2YD,F6L912,60"WIDE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

913

1

EIMCO 913 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

913

1

3 yrd LHD in good condition, CAT engine, Ejector bucket

Andy Pavlisick

970-872-3894

highc@paonia.com

Eimco

913C

1

EIMCO 913C LHD SCHEDULE 31, CAT 3304, GD MINIBORE BOOMS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

915B

1

EIMCO 915-B LHD

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

936M-3

2

30 ton Sheilded Hauler/Scoop, CAT 3306 permissible

Andy Pavlisick

970-872-3894

highc@paonia.com

EJC

130D

4

3.5 yard scoops,

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

EJC

210DB

1

EJC210DB @CAT,ROCKWELL 5225,LCB, 3306 PCTA

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

JS220

1

Rebuilt 2.2 yard LHD, New Deutz 914 engine, wet disc brakes, upgraded hydraulics

Frank Crites

807-221-4670

sales@resequip.com

EJC

JS220

B10-642

2

EJC JS220, CAT 3304, LCB,Q/C, FORKS, blade 6 way new

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

JS220

B10-644

1

EJC JS220, 3304 HOLE IN BLOCK,DRY DISC,Q/C,FORKS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

JS350

B10-640

1

EJC JS350 LHD, POSI AXLES, NO ENG, NO TRANS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Em France

CTX1

2

EM FRANCE LOADER CTX-1 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Ghh

LF6.1

ID1034

1

Tunnel loader, Deutz engine F6L413FW (102 kW), Tires 17.5R25, Particulate filter, standard bucket 3 m#,

Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

Ghh

LF6.1

ID1034

1

Tunnel loader, Deutz engine F6L413FW (102 kW), Tires 17.5R25, Particulate filter, standard bucket 3 m#,

Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

J&S

LXD200

1

LHD, Deutz F6L914 Turbo, Clark T20000 transmission, DANA axles

Martin Short

705-682-2084

mshort@waldenequipment.ca

Jarvis Clark

JC210

1

SCOOPTRAM

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

Jarvis Clark

JCI600M

1

1985, Jarvis Clark JCI 600M Needs Refurbished , Reference: Unit# ST-03

Dave Stobie

807 826 1112

dave@manroc.com

Jarvis Clark

JS 600

1

1988, Tamrock JS 600 Condition: Used Reference: UNIT# ST-13

Dave Stobie

807 826 1112

dave@manroc.com

Jarvis Clark

JS-800

1

Deutz F12L413FW

Mark Levin

303.567.4174

mark.levin@minenv.com

Jarvis Clark

JS100

B10-688

1

JARVIS CLARK JS100

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Jarvis Clark

JS100

B10-694

2

SCOOPTRAM, JS100 , DEUTZ,hydrostatic,clark

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Jarvis Clark

JS220

1

1- Jarvis Clark JS220 loader Deutz power

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Jarvis Clark

JS500

1

JARVIS CLARK JS500 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

JCI

100M

1

JCI 100M LHD, 1.25 yd bucket capacity, Deutz Diesel engine

Mark Alexander

705-671-2100

mark@minesource.com

JCI

125

1

Rebuilt, JCI 125, Deutz D914LO4

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

JCI

125M

1

JCI 125 , only 40 hrs on rebuilt

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

JCI

125M

3

1.25 Yard Scoop

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

JCI

125M

1

1- JCI125M loader Deutz power w/ standard bucket

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

JCI

125M

1

JCI 125M scooptram Deutz BF4L914 power

Bill Green

520-805-0739

desertdiesel@gmail.com

JCI

125M

1

JCI 125M LHD F4L912

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JCI

125M

1

(1) 1995 Wet Disc/Diff, F4L912w, 1,241 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

JCI

250M

1

JCI 250M LHD REAR FRAME

Scott Pillar

269-628-5605

pillar@pillarmfg.com

JCI

250M

1

JCI 250M LHD, Deutz F5L413, Serial #60489

Mark Alexander

705-671-2100

mark@minesource.com

JCI

250M

1

1- JCI 250M loader Deutz power w/ ejector bucket

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

JCI

300M

3

3- JCI 300 3 yard scoops,1JCI 350 3.5 yard scoop, 1 is completely rebuilt

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

JCI

500M

1

5 yard scoop 3306 CAT engine, unit ST-05

Dave Stobie

807 826 1112

dave@manroc.com

JCI

50M

1

JCI 50M LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

JCI

50M

1

Deutz F2L511W engines, standard JCI specs

Mark Levin

303.567.4174

mark.levin@minenv.com

JCI

250M

B10-543

1

JCI 250M@F5L413,LCB,(213), AXLES LCB, CYL, TRANS REBUILT, AXLES REBUILT

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JCI

250M

B10-717

1

JCI 250M,F5L413,LCB,Good runner,71"W,OROPS,1200X24

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JCI

50M

1

(1) 1987 .5 Yard, hydrostatic

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

JCI/MTI

100/125M

6

Deutz F4L912W. One with remote.

Mark Levin

303.567.4174

mark.levin@minenv.com

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

R2900

CAT

R2900G

CAT

Joyglobal

4362, 4736,

B10-661

B10-665

B10-652

B10-523

09431

SC 125 0001

B10-710

TheLT1650 Mining Equipment Prospector p.19 3 3-Joyglobal LT1650 Loaders 2102 models, unused 0 hours !11cy capacity


JCI

250M

B10-543

1

JCI 250M@F5L413,LCB,(213), AXLES LCB, CYL, TRANS REBUILT, AXLES REBUILT

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JCI

250M

B10-717

1

JCI 250M,F5L413,LCB,Good runner,71"W,OROPS,1200X24

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JCI

50M

1

(1) 1987 .5 Yard, hydrostatic

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

The Mining Equipment Prospector p.20 S/N

LHDs Undergound Loaders

Make JCI/MTI

Model 100/125M

Joyglobal

LT1650

3

3-Joyglobal LT1650 Loaders 2102 models, unused 0 hours !11cy capacity

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Joyglobal

LT270

3

3- Joyglobal LT270 Loaders 2016 models, Rops RENT ME

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

MTI

125

1

1995 MTI 125, Forks and Bucket, unit ST-11

Dave Stobie

807 826 1112

dave@manroc.com

MTI

125M

1

Reconditioned MTI 125M, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

MTI

125M

1

Refurbished, JCI-125M, Deutz diesel, wet disc brakes, Canopy, ready to work!!

Mike Castron

705-693-9870

MikeC@cardinalmining.com

MTI

125M

1

Reconditioned MTI 125M, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

MTI

LT210

2

2- MTI LT210 loaders Deutz power w/ejector buckets

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

MTI

LT270

2

2- MTI LT270 loaders Cummins power w/ ejector buckets

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

MTI

LT350

1

MTI LT 350 LHD, Mercedez diesel, 882 hours, Reported to be in mint condition

Mark Alexander

705-671-2100

mark@minesource.com

MTI

LT650

1

1- MTI LT650 loader 4 yd loader Cummins power w/ejector bucket

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

MTI

210

1

MTI 210 LHD LOADER ,F4L912@54HP,56"W, ONLY 1500 HOUR SINCE NEW

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

MTI

50M

3

3- MTI 50M".5CY, 32 inch Wide, Good condition"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

MTI

M125

2

2- MTI 125M "1.5CY, 4’ Wide, Good condition"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

RDH

3TEB

1

RDH 3TEB, 1.5 YRD LHD, Battery powered machine, low hours, s/n 1320, Ready to Go

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

RDH

600D

1

RDH 600D 6 yrd. LHD, 600 hours, s/n 1288, Ready to Go

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Sandvik

0010

4142 4143,

5

Toro 0010 Loader, 1999, 2000, 2006

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

006

4602

1

Sandvik TORO 006, 2003, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

007

4139

1

2005, Toro 007 Loader, 2005

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

1400

B10-632

1

Sandvik,Toro 1400 ,CAB,POSI, 2001,DDEC,21D4354

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

1400

B10-686

2

SANDVIK TORO 1400 LHD,21D+53R300,DDEC60 300HP,posi

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

1400

B10-685

1

SANDVIK 1400 DDEC 300HP,2002,21D4354 posi,5422-149

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

151

1

1 x Toro 151 powered by a Deutz F6L912W engine

Bill Green

520-805-0739

desertdiesel@gmail.com

Sandvik

151D

4550

1

Sandvik Toro 151D Loader, 2004

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

306E

4606

1

Sandvik 306E LOADER (disassembled), Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

450

B10-681

2

SANDVIK TORO 450 ,DDEC 325HP,2005R,21D3847,POSI,8502

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

450

4242, 4243

2

Toro 450 Loader, 2000 & 2002,

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

450D

3

Toro 450D 8 yard scoops, DDEC series 60

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Sandvik

450D

B10-684

1

SANDVIK 450D,DDEC6063WK32,285HP,21D3847,POSI,4422TRANS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

501D

4600

1

Sandvik TORO 501D, 1992

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

514

4692

1

Sandvik 514 (core) Scoop, 2010,

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

EJC 130

1

Cat 3304 engine, Clark powertrain, dedicated forks only - no bucket, Rent or Buy ready to go

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Sandvik

EJC 130

1

Rebuilt EJC 130, with new Mercedes 906 engine

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

Sandvik

EJC 130

1

Rebuilt EJC 130, with Deutz F8L413 engine

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

Sandvik

EJC 210

1

Rebuilt EJC 210, 50 series DDEC

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

Sandvik

EJC 210

1

U/G Loader, 6 yard, 1990, s/n 2018, Deutz F10L413FW

Mark Alexander

705-671-2100

mark@minesource.com

Sandvik

EJC 210

3

(3) 2001 6 Yard, Posi stop, 50 series

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Sandvik

JS-220

3

JS-220 Referbished

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Sandvik

LH203

1

LH203 with low hours good condition

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Sandvik

LH306E

1

SANDVIK LH306E 575V,LOW HOUR,PIECES

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

LH514

4

Sandvik 4 Loader package plus spare parts

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

Sandvik

LH514

4753 4692

2

Sandvik LH514 Loader 1x 2007 , 1x 2010 (Scoop - Edm)

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

Toro 0010

975

1

LHD Standard Equipped, Possi Brake

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Sandvik

Toro 0010

1

2 - Sandvik Toro 0010 LHD's, 38,000kg tramming capacity, POSI-STOP brakes

Mark Alexander

705-671-2100

mark@minesource.com

Sandvik

0010

9992 9995

5

Sandvik TORO 0010 Loader 2000, 1999, 2006 used, Ireland and Sudbury

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

LH307

4893

1

Sandvik LH307 Loader 2012 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

LH517

4750, 4751,

3

Sandvik LH517 Loader 2011 used, Australia

Randy Size

780-469-5677

rsize@amt-inc.ca

SANDVIK EJC

911

4093

1

EIMCO 911 Loader

Randy Size

780-469-5677

rsize@amt-inc.ca

B10-709

B10-703

Qut. 6 Description Deutz F4L912W. One with remote.

Contact Mark Levin

Edmonton

Telephone 303.567.4174

E-mail mark.levin@minenv.com


Sandvik

0010

9992 9995

5

Sandvik TORO 0010 Loader 2000, 1999, 2006 used, Ireland and Sudbury

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

LH307

4893

1

Sandvik LH307 Loader 2012 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

LH517

4750, 4751,

3

Sandvik LH517 Loader 2011 used, Australia

Randy Size

780-469-5677

rsize@amt-inc.ca

SANDVIK EJC

911

4093

1

EIMCO 911 Loader

Randy Size

780-469-5677

rsize@amt-inc.ca

SANDVIK EJC

911B

4092

1

EIMCO 911B Loader

Randy Size

780-469-5677

rsize@amt-inc.ca

Side Dump

Loader

1

NEW Side Dump Loader, Deilmann Haniel L513 SD,

Wolfgang Stroebitzer

43-7232-34552-0

office@alba.at

Tamrock

EJ210D

2

SCOOPTRAM

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

Tamrock

EJC-210

5

6 yard LHD, series 50 engines

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Tamrock

EJC-300

1

EJC 300 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Tamrock

EJC130D

1

Tamrock EJC130 D, Rebuilt machine, Mercedes Engine

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Tamrock

TORO

1

Tamrock TORO 151E electric scoop s/n 6059, as is core

Frank Crites

807-221-4670

sales@resequip.com

TES

1.25 YARD

1

1.25 Yard Underground Loaders

Joelle Garside

705-855-4254

joelle.garside@tesinc.ca

TES

2.0 YARD

1

2.0 Yard Underground Loaders

Joelle Garside

705-855-4254

joelle.garside@tesinc.ca

TES

3.5 YARD

1

3.5 Yard Underground Loaders in pieces

Joelle Garside

705-855-4254

joelle.garside@tesinc.ca

TES

6.0 YARD

1

6.0 Yard Underground Loaders

Joelle Garside

705-855-4254

joelle.garside@tesinc.ca

TORO

006

2

TAMROCK TORO 006,2001,MERC, POSI, OROPS,17200KG,86"W

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TORO

007

2

2 - Toro 007 LHDs with 6.5 yd3 capacity buckets; year 2007; serials T7007327 and T7007355

Robinson Castro

+56 02-273 476 14

rrcastro@tie.cl

TORO

151D

5

Two with Deutz F6L912W, pending refurbishment. Two with Deutz 914s. One unit with Mercedes 904, low hours, Mark Levin

303.567.4174

mark.levin@minenv.com

TORO

250D

1

TORO 250D, F6L413, DRY DISC, 1400X24,NICE , ONLY 2200 HOURS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TORO

450D

2

Good Used Toro 450Ds., Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

TORO

500

B10-505

1

TORO 500 LHD, CAB, F12L413, LCB, RECONDITIONED, GOOD RUNNER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

EST 3.5

B10-517

1

WAGNER EST 3.5, ROCKWELL LCB, ELECTRIC

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

HST-1A

1

WAGNER HST1-A LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

HST1A

1

1- Wagner HST1A loader Deutz power

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Wagner

HST1A

B10-664

1

WAGNER HST1A,1YD,F4L912,48"WIDE,CURVED BUCKET,HYDRO STATIC DRIVE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

SST 2.5

B10-526

1

WAGNER SST 2.5,(04 507),NO ENG,POSI,16D,28000 TRANSMISSION

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

SST 2.5

B10-527

2

WAGNER SST 2.5,F6L413,(04 205),POSI,16D,28000

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-2B

1

WAGNER ST2-B LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

ST-2B

1

DEutz engine, modified wet disc brakes

Frank Crites

807-221-4670

sales@resequip.com

Wagner

ST-2B

B10-654

2

WAGNER ST2B CORE,DRUM,DEUTZ,NO TIRES

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-2B

B10-673

1

WAGNER ST2B S/N 396.71,F6L912,DRUM,AIR,62"W,GOOD RUNNER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-2D

1

Scoop S/N # DA03PO804, Schedule 31 Permissible, Cat. 3304 engine, 2076 hours, MSHA Certified

Andy Pavlisick

970-872-3894

highc@paonia.com

Wagner

ST-2D

1

WAGNER ST2D LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

ST-2D

4

(4) Reconditioned, Wagner 2yd, mid 1990’s, Deutz 4cylinder liquid cooled engines, "model ST-2D’s

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Wagner

ST-2D

3

Wagner ST2D, Rebuilt Ready to go

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Wagner

ST-2D

1

Wagner ST2D good condition scoop with recent rebuilt Deutz F6L912W engine and newly rebuilt hydraulic,

Bill Green

520-805-0739

desertdiesel@gmail.com

Wagner

ST-2D

B10-656

1

WAGNER ST2D CORE,DRY DISC,NO BOOM,NO BKT,DEUTZ,AIR

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-2D

B10-659

1

WAGNER ST2D, DEUTZ,LCB, REBUILD

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-2D

B10-672A

1

WAGNER ST2D,Deutz,LCB,AIR

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-2D

B10-692

1

WAGNER ST2D, DEUTZ,DRY DISC,AIR,COMPLETE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-3.5

1

WAGNER ST3.5 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

ST-3.5

1

WAGNER 3.5 8 CYL DEUTZ, CAT ENGINE, 471 DDEC

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Wagner

ST-3.5

1

Rebuilt Machine has a new Cummins engine

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Wagner

ST-3.5

1

Rebuilt, Wagner 3.5 yd, 1997, model ST-3.5

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Wagner

ST-3.5

B10-647

1

WAGNER ST3.5 F8L413,ROCKTORQUE, VERY GOOD

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-3.5

B10-676

1

WAGNER ST3.5 MERC 906,CLARK POSI,OROPS,R28000

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-3.5

B10-690

1

WAGNER ST3.5, MERC 906, ROCTORQUE,DA04P0077

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-3.5S

1

S/N # 31-224-0, Schedule 31 Permissible, Cat. 3306 engine, 2300 hours, internal wet brakes, exhaust filter,

Andy Pavlisick

970-872-3894

highc@paonia.com

Wagner

ST-5

2

WAGNER ST5 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

ST-5A

1

Scoop S/N #300.76, Cat. 3306 engine #230988

Andy Pavlisick

970-872-3894

highc@paonia.com

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

09582,

B10-667

B10-657

935

The ST-5D Mining Equipment Prospector p.21 1 WAGNER ST5D LHD


Wagner

ST-3.5

B10-676

1

WAGNER ST3.5 MERC 906,CLARK POSI,OROPS,R28000

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-3.5

B10-690

1

WAGNER ST3.5, MERC 906, ROCTORQUE,DA04P0077

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-3.5S

1

S/N # 31-224-0, Schedule 31 Permissible, Cat. 3306 engine, 2300 hours, internal wet brakes, exhaust filter,

Andy Pavlisick

970-872-3894

highc@paonia.com

Wagner

ST-5

2

WAGNER ST5 LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

The Mining Equipment Prospector p22

Make Wagner

Model

Scoop S/N #300.76, Cat. 3306 engine #230988

Contact Andy Pavlisick

Wagner

ST-5D

Wagner

ST-5DS

1

WAGNER ST5D LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

1

WAGNER ST5-DS LHD

Greg Pillar

269-628-5605

Wagner

ST-6C

pillar@pillarmfg.com

1

WAGNER ST6-C LHD

Greg Pillar

269-628-5605

Wagner

ST-6C

pillar@pillarmfg.com

1

LHD 6 Yard, LCB & SAHR Brakes, new rebuilt series 50 Detroit Engine, year 1995

Jeannot Courchesne

705-857-2154

Wagner

sales@rdhminingequipment.com

ST-6C

1

Completely rebuilt, RRC interface, New QSL9 Cummins, Rebuilt Clark powertrain, SAHR brakes, Canopy.

Scott Pillar

269-628-5605

Pillar@pillarmfg.com

Wagner

ST-6C

1

Mercedes 926, EOD, ROPS, Fire suppression, excellent condition, backfill jammer available

Mark Levin

303.567.4174

mark.levin@minenv.com

Wagner

ST-6C

WE449

1

Detroit 50 Series Clark R32000 Clark 8000 Clark D3770 Rebuilt

Martin Short

705-682-2084

mshort@waldenequipment.ca

Wagner

ST-6C

B10-572

1

WAGNER ST6C SCOOPTRAM, FRAME ONLY, REBUILT

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-6C

B10-603

1

WAGNER ST6C, CAB, 2001, ROCKTORQUE, 3V CUMMINS, TOTALLY REBUILT

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-6CN

B10-633

2

WAGNER ST6CN @ CAB & Bucket, DDEC 50,ROCKTORQUE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-700

1

Wagner ST700, Rebuilt Mercedes engine

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Wagner

ST-8A

1

WAGNER ST8-A LHD

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

ST-8A

1

LHD, 8 Yd., dry disc - Detroit 8V71, Yard Dog, core

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Wagner

ST-8A

1

Scoop S/N # DA12P0375, Engine Deutz, 1153 hours, tires 2 ea. 95% 2 ea. new, size 26.5 X 25 26 ply, paint new Andy Pavlisick

970-872-3894

highc@paonia.com

Wagner

ST-8A

B10-585

1

WAGNER ST8A LHD, F12L413, DRY DISC, RUNNER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-8B

DA15PO412

1

60 series DDEC ( only 3700 hrs on engine), Clark Powertrain, 26.5 x 25 tires , 8yd bucket, Just came out of

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Wagner

ST-8B

1

Reconditioned Wagner ST8B, certified ROPS canopy, Brand NEW QSM11 Cummins 330 hp. engine, New

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Wagner

ST-8B

B10-687

1

WAGNER ST8B DDEC60,11L siezed,good bucket,D75830 SAHR

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

ST-8B

DA15P0529

1

NEW Cummins QSM 11 engine, Clark Powertrain, 26.5 x 25 tires , 8yd bucket, Excellent Condition & ready to

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Wagner

ST-8B

DA15P0507

1

Underground LHD, 60 series DDEC, Clark Powertrain, 26.5 x 25 tires, 8yd bucket, just came out of service

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Wagner

ST1020

B10-670

1

WAGNER ST1020, 2005,DDEC,DF2544,EOD,CAB,19D2748,POSI,102"W

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

WBM

JS-220

SC 2 001

1

2.2 Yard Scoop

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

ST-5A

S/N

LHDs Undergound Loaders

Qut. 1 Description

997

442

Telephone 970-872-3894

E-mail highc@paonia.com

Grout Pumps and Shotcrete Equipment Make Make

Model Model

S/N # Serial

Qut. Qut Description Description:

SHOTCRETE EQUIPMENT

Contact Contact:

Telephone Telephone:

E-mail e-mail:

1

2006, Concrete Pump, ALIVA 263, Top Condition

+43-7232-34552-0

office@alba.at

Aliva

285

1

1999, Concrete Pump, ALIVA 285, Top Condition

Wolfgang Stroebitzer

+43-7232-34552-0

office@alba.at

Aliva

AL302

1

Spray Arm unit, low hours, 575 V, setup for tractor mount

Mark Levin

303.567.4174

mark.levin@minenv.com

1

Allentowm GM060 Yanmar 10kw dry Shotecrete Pump,200' lift,4-12YD/HR,350-750CFM

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Aliva

263

Allentowm

B96-502

Wolfgang Stroebitzer

Chemgrout

Grout

6

Various sizes, 2 inch to 6 inch, pneumatic, electric and hydraulic drive, with and without paddle and colloidal

Mark Levin

303.567.4174

mark.levin@minenv.com

Craelius

Colloidal

1

Pneumatic drive, can be converted to electric

Mark Levin

303.567.4174

mark.levin@minenv.com

Craelius

Grout Plant

1

Skidmounted, 575 V. piston pumps

Mark Levin

303.567.4174

mark.levin@minenv.com

Driftech

2100D

1

MSV 2100D SHOTCRETE UNIT, BF6M1013,92"W

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Driftech

MSV2100

1

Shotcrete Sprayer, HV Panel 575V, Meyco boom, Allentown pump and forward seating.

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Driftech

MSV2100E 1352

1

Driftech MSV2100E , Shotcrete Sprayer, Meyco With Enclosed Cab

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

B50-623

1

DUX SI-REMIXER S/N 1234,OROPS,CUMMINS,OROPS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

DUX

B50-606

DUX

DT-16

B50-553

1

DUX DT-16 TRANSMIXER,MERC,28000,16D,5.5YD DRUM,86"W

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

DUX

S1-REMIX

1327

1

NEW DUX S1-Remix u/g remix truck, 4.5 m# capacity, Cummins QSB 4.5 (148 HP) engine

Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

Eimco 975

Transmixer

1

Deutz power, good runner.

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco 985

Transmixer

1

Deutz power, good runner.

Mark Levin

303.567.4174

mark.levin@minenv.com

Getman

A64

4903

1

Getman A64 Batchplant, 2010, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

A64

4904, 4905

2

Getman A64 A64 w/ PK8501 crane, 2013, 2014 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

J&S

SSX4100M 1409

1

2014 Shotcrete Sprayer

Martin Short

705-682-2084

mshort@waldenequipment.ca

Jacon

ROBOSHO 01755

1

ROBOSHOT MIDGET SHOTCRETE SPRAYING MACHINE

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

Jacon

TRANSMIX 01754

1

SHOTCRETE MIXER

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

MacLean

SS-3

2

MacLean SS-3 Shotcrete Sprayer 2009 used Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

4687, 4688


Getman

A64

4903

1

Getman A64 Batchplant, 2010, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

A64

4904, 4905

2

Getman A64 A64 w/ PK8501 crane, 2013, 2014 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

J&S The

SSX4100M Prospector 1409 Equipment

Martin Short

705-682-2084

mshort@waldenequipment.ca

705-665-2227

jkirkbride@tracksandwheels.com

Jacon

Mining

ROBOSHO 01755

Grout Pumps and Shotcrete Equipment

1

ROBOSHOT MIDGET SHOTCRETE SPRAYING MACHINE

Jim Kirkbride

1

SHOTCRETE MIXER

Jim Kirkbride

Contact

Telephone

705-665-2227

jkirkbride@tracksandwheels.com rsize@amt-inc.ca

Make

Model

MacLean

SS-3

4687, 4688

2

MacLean SS-3 Shotcrete Sprayer 2009 used Edmonton

Randy Size

780-469-5677

MacLean

SS2

SS2-013

1

Shotcrete Sprayer - Diesel, NEW!, ROPS/FOPS, Water Scaler, 13m3/hr, Heavy-Duty Boom, Warranty

Dan Stern

705-445-5707 x256 dstern@macleanengineering.com

MacLean

TM3

1

NEW unit- Transmixer, 6m3 Drum, Merc 906, Enclosed Cab, Form Oil, Accelerant Transfer Tank

Dan Stern

705-445-5707 x256 dstern@macleanengineering.com

MacLean

TM3

1

MacLean TM3 Concrete Mixer 2009 used Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Marcotte

Shotecrete

1

Marcotte Shotcrete Sprayer, 2007, SHT010, M40 Carrier, S/N 3040, spare boom and pump

Mark Alexander

705-671-2100

mark@minesource.com

Marcotte

Shotecrete

1

Marcotte Wet Shotcrete Sprayer w/ Hi-Pressure Scaler, 2007, Mercedes MB906 201HP, many spare parts

Mark Alexander

705-671-2100

mark@minesource.com

Mayco

Grout

1

(1) Deutz Engine

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Meyco

COBRA

1

MEYCO COBRA SHOTCRETER,Diesel/Electric,Paus,F5L912,82"W,Remote control

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Meyco

Piccola

2

Dry mix shotcrete machines on skids, one is pneumatic, other pneumatic over hydraulic drive

Mark Levin

303.567.4174

mark.levin@minenv.com

Meyco

Poca

ID1002

1

Concrete spraying mobil, extremely compact, Driving with Diesel engine, spraying with electric motor (37KW),

Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

Meyco

Robojet

4097

1

Meyco Robojet Shotcrete, 1999

Randy Size

780-469-5677

rsize@amt-inc.ca

Moyno

Grout

18 Various sizes, 2 inch to 10 inch, pneumatic, electric drive, with and without paddle and colloidal mixers

Mark Levin

303.567.4174

mark.levin@minenv.com

MTI

UTV-MT

4423

1

MTI UVT-MT underground Mixer Truck 2008 used Colorado

Randy Size

780-469-5677

rsize@amt-inc.ca

MTI

UVT-MT

B50-624

1

2000 MTI UVT-MT U/G REMIXER , DEUTZ

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B50-628

1

NORMET 460V NORSTREAMER 30V SHOTCRETE PUMP/TRAILER LIKE NEW

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Jacon

S/N

1 2014 Shotcrete Sprayer p23

TRANSMIX 01754

Normet

4689

B50-605

Qut. Description

E-mail

Normet

1050

9991

1

Normet Spraymec 1050, 2007, 7 Ireland

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

1050M

B50-602

1

NORMET 1050M NT100,CONCRETE MIXER VARIOMEC,D914L05

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

1050M

B50-603

1

NORMET VARIOMEC 1050M CONCRETE MIXER VARIOMEC,D914L05,86" WX100"H

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

1500

4807

1

Normet Multimec 1500 Mixer Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

7110

B50-627

1

NORMET SPRAYMEC 7110 WPC,CUMMINS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

8100

4729

1

Normet Spraymec 8100 VC 2012 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

8100 VC

4729

1

Normet Spraymec 8100 VC, 2012, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

9150

4255

1

Normet Spraymec 9150 WPC, 2008 Ontario

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

9150W

B50-612

1

NORMET 9150WPC@NSB900 SHOTECRETE BOOM,very good condition

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

NT80,

B50-625

1

NORMET NT80, Shotecretor,PARTS,8 Ton Carrier, T80C91034

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

Spraymec

1

Normet

Mark Levin

303.567.4174

mark.levin@minenv.com

Normet

Transmixer

1

Normet, Transmixer, Low Hours

Mark Levin

303.567.4174

mark.levin@minenv.com

Normet

Variomec

B50-604

1

NORMET MIXER VARIOMEC,F6L914,NT100,ROPS/FOPS,CLARK AXLES,Kart 5.5m3 DRUMS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Putzmeister

SPM 4210

490701151

1

SHOTCRETE SPRAYER, good running condition, 444 hours

Éric

Packwood

418-872-0600

Eric.Packwood@ebcinc.com

Putzmeister

SPM-307

K3620

1

Putzmeister Allentown,SHOTCRETE SPRAYER, good running condition, 745 hours

Éric

Packwood

418-872-0600

Eric.Packwood@ebcinc.com

RDH

CRETEMA

14-1313, 14

2

REMIXER TRUCK 600R (Inclose cabin), good running condition, 398 and 372 hours

Éric

Packwood

418-872-0600

Eric.Packwood@ebcinc.com

RDH

Transmixer

1

(1)RDH Transmixer 600

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Reed

Lova 16

3

shotcrete dry mix machines on skids

Mark Levin

303.567.4174

mark.levin@minenv.com

Reed

Predampen

1

Pneumatic drives, skidmounted

Mark Levin

303.567.4174

mark.levin@minenv.com

Reed

Wet Mix

2

One on 18 gauge rail wheels, one on trailer, Deutz FL912W Powered.

Mark Levin

303.567.4174

mark.levin@minenv.com

Reed

Lova 3

1

shotcrete dry mix machine on skid

Mark Levin

303.567.4174

mark.levin@minenv.com

B50-567

1

ROCKTECH SHOT CRETE PUMP/BOOM

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

3862

1

Rocktech M60CT Shotcrete Pump & Boom

Randy Size

780-469-5677

rsize@amt-inc.ca

1

Shotcrete Technologies, Robot Arm Kit, 1 NEW, unused

Mark Levin

303.567.4174

mark.levin@minenv.com

418-872-0600

Eric.Packwood@ebcinc.com

Rock-Tech

Spraymec CO

1

Rock-Tech

M60CT

Shotcrete

Robot Arm

Sika

PM-407-P

490700334

1

Sika Putzmeister, SHOTCRETE SPRAYER, good running condition

Éric

Stabilator

Shotcreter

B50-511

1

STABILATOR SHOTCRETER LIKE NEW,deutz/clark/clark axles

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Terracrete

Cellular

1

575/480V, colloidal and paddle mixers, grout pump, soap injector, PLC autobatching, automated feeder, VFD

Mark Levin

303.567.4174

mark.levin@minenv.com

Packwood

GENERATORS Can't find what you need, try are MEP Network Search at WWW.MiningEquipment.net and get all our suppliers searching.

Make

Model 105 kw

Serial #

Qut Description: 1

105KW-131 KVA -480 Volt, 3 Phase, 3304 Cat. engine, 1512 hours, skid mounted

Contact:

Andy Pavlisick

Telephone:

970-872-3894

e-mail:

highc@paonia.com


Terracrete

1

Cellular

575/480V, colloidal and paddle mixers, grout pump, soap injector, PLC autobatching, automated feeder, VFD

Broadcrown

Model Model

S/N # Serial

303.567.4174

Contact Contact:

Telephone Telephone:

mark.levin@minenv.com

Generators

The Mining Equipment Prospector p.24 Make Make

Mark Levin

GENERATORS

Qut. Qut Description Description:

E-mail e-mail:

105 kw

1

105KW-131 KVA -480 Volt, 3 Phase, 3304 Cat. engine, 1512 hours, skid mounted

Andy Pavlisick

125 kw

1

125KW -155 KVA - 480 Volt, 3 Phase, Model: BF6Ml013CP, Deutz engine, 787 hours, 225 HP, skid mounted

Andy Pavlisick

970-872-3894

highc@paonia.com

21 kw

1

21KW - 26.25 KVA -120-240 Volt, Single Phase, Deutz engine, 10 hours, air cooled, skid mounted

Andy Pavlisick

970-872-3894

highc@paonia.com

100 KVA

1

Skidmounted with enclosure, Deere 4045T power, programmable load transfer, low hours. 480/240/120 output

Mark Levin

303.567.4174

mark.levin@minenv.com

B185-507

1

CAT 258KVA,3306DI GENSET,480volt

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

970-872-3894

highc@paonia.com

CAT

3412

4173

1

Caterpillar 3412 Genset Core

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

3512

3992

1

Cat 3512 Genset, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

3612

4057

1

Caterpillar 3612 Genset Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

398

4059

1

Caterpillar 398 Genset Core, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

XQ-350

1

350 KVA, Trailer Mounted, with enclosure, CAT 3406 power, 480V output

Mark Levin

303.567.4174

mark.levin@minenv.com

Marathon

300 KW

1

Load Bank Tested, Genset p/b CAT C-15

Merle Hoover

570-966-7312

info@ewdrilling.com

MCI Power

B185-511,

2

MCI POWER CENTER 525 36686-53253-0114 RECTIFIER 4160VAC/250VDC

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

MCI Power

B185-512

1

MCI POWER CENTER 500 36686-53254-0114

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Multiquip

DCA-275

1

275 KVA, trailer mounted, with enclosure, 240/480V output, Komatsu power

Mark Levin

303.567.4174

mark.levin@minenv.com

Myers Aplex

SC-45

1

Aplex Triplex Pump, 2200 PSI

Merle Hoover

570-966-7312

info@ewdrilling.com

Newage

250KVA

1

NEWAGE STAMFORD 250KVA GENERATER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

1

10 - Onan/Cummins 300kW portable generators, enclosed in shipping container, 440v, complete with control

Mark Alexander

705-671-2100

mark@minesource.com

B185-501

Onan/cummin 300kw

Underground Trucks

Make Make

Model Model

S/N # Serial

Atlas Copco

MT42

Atlas Copco

MT420

Atlas Copco

Qut Description Qut. Description:

UNDERGROUND TRUCKS

Contact Contact:

Telephone Telephone:

E-mail e-mail:

2

Atlas Copco MT416 Truck 2013 Spokane

4895, 4896,

3

Atlas Copco MT42 Truck 2- 2014, 1-2015

Randy Size

780-469-5677

rsize@amt-inc.ca

3927

1

Atlas Copco MT420, 1999, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

MT426

1

2 - Wagner MT426 Haul Truck, Detroit Series 60 DDEC3, Clark 5400-21 transmission, Rock Torque Axle

Mark Alexander

705-671-2100

mark@minesource.com

Atlas Copco

MT426

1

Wagner MT426 Haul Truck U/G DDEC Engine

Joelle Garside

705-855-4254

joelle.garside@tesinc.ca

Atlas Copco

MT426-30

2

(2) Copco MT426-30 U/G Trucks"DDEC Engine SAHR brakes"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Atlas Copco

MT433

1

2 - Atlas Copco Wagner MT433, 35 ton payload, SAHR brakes, refurbished condition.

Mark Alexander

705-671-2100

mark@minesource.com

Atlas Copco

MT433

3777

1

Atlas Copco MT433 Truck 1998 Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

MT436B

4168

1

Atlas Copco MT436B Truck , 2005,

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

MTT420

1

Reconditioned Atlas Copco MTT 420 Truck, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

MT416

4666, 4665

Randy Size

780-469-5677

rsize@amt-inc.ca

BRUTE

B30-515

1

BRUTE DUMP TRUCK (33-558)

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

BRUTE

B30-553

1

SIEN BRUTE TRUCK (24-190)

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

AD-45

B30-594

1

CAT AD-45 TRUCK 2004,CAB,3408E HEUI(3100 eng hr),9'10"W,PAINTED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

AD30

B30-602

1

CAT AD30 TRUCK.2

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

AD30

B30-603

1

CAT AD30 CAB,FRAME

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

AD30

4820

1

Caterpillar AD30 2016 Model, 1 in Red Deer, 2 in Thunder Bay, Ontario

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

AD30

4913, 4914

2

Caterpillar AD30 Wide Body 2016 Model, Ontario

Dave Erwin

780-469-5677

derwin@amt-inc.ca

Cat

AD45

1

2004 Caterpillar AD45 truck, Good condition, EROPS

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Cat

AD45

1

1- Caterpillar AD45 Truck dump bed

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

AD45B

3

CAT AD45B Truck, 1x 2009, Ontario 2x 2013 (CCR), Austarlia

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

AD45B

2

NEW THIS YEAR - AVAILABLE FEBRUARY AND APRIL 2017

Dave Erwin

780-469-5677

derwin@amt-inc.ca

Cat

AD45B

2

2- Caterpillar AD45B Trucks, C18 engines, dump box

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Cat

AD45T

2

2- Caterpillar AD45T Trucks, C18 engines, EOD Box

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

AD60

4831

1

Caterpillar AD60 2014 Model, Austarlia

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

AE40

B30-574,

2

CAT AE40 DUMP TRUCK,CAB,EOD,3408

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

DUX

DT-20N

1326,1329

2

NEW DUX DT-20N u/g trucks, 20 tonne, Cummins QSB 6.7 (220 HP) engine

Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

DUX

DT-20T

1311131213

3

NEW DUX DT-20T u/g concrete haulers, 20 tonne, Cummins QSB 6.7 (220 HP) engine

Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

4836, 4837,


CAT

AD60

4831

1

Caterpillar AD60 2014 Model, Austarlia

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

AE40

B30-574,

2

CAT AE40 DUMP TRUCK,CAB,EOD,3408

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

DUX

DT-20N

1326,1329

2

NEW DUX DT-20N u/g trucks, 20 tonne, Cummins QSB 6.7 (220 HP) engine

Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

DUX

DT-20T

1311131213

3

NEW DUX DT-20T u/g concrete haulers, 20 tonne, Cummins QSB 6.7 (220 HP) engine

Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

DUX

DT-20U

1

20 ton u/g truck, Detroit 71 TI DDEC, year 1998

Mark Alexander

705-671-2100

mark@minesource.com

DUX

DT-22

1

1999, DUX DT-22 haul truck, rebuilt machine, new Engine and Transmission

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

DUX

DT-22

1

DUX DT22 - 22 TON TRUCK,DDEC50,36423,16D2149,POSI,RUNNER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

DUX

DT-22N

2

2- Dux DT22N 20 ton trucks

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

DUX

DT-50

2

2 DUX DT-50, 50 ton payload u/g dump trucks, only 1000 hours since new, DDEC 60 series

Aibar Tokzhumanov

416-567-4077

aibar.tok@gmail.com

DUX

DT-5N

1343

1

NEW DUX DT-5N u/g truck, 5 tonne, Deutz D914 L05 (97.2 HP) engine

Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

DUX

ET-24

4302, 4788

2

Ejector Truck 2005, 2013 Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

DUX

P1

9994

1

DUX P1 Porter Truck, Ireland

Randy Size

780-469-5677

rsize@amt-inc.ca

DUX

P1

4343

1

DUX P1 Carrier, 2005

Randy Size

780-469-5677

rsize@amt-inc.ca

DUX

TD-18

1331

1

NEW DUX TD-18 u/g teledumper (telescopic dump box), enclosed fully-equipped cab, 18.8 tonne, Cummins QSB Hermann Bumueller

+1-450-581-8341

sales@duxmachinery.com

DUX

TD-30

1

Haultruck,DDEC 60 engine, Ejector Box

Frank Crites

807-221-4670

sales@resequip.com

DUX

ET-24

1

Enclosed cab, Detroit Power, good runner, fire suppression. MTI Reman. In Elko yard.

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco

5 ton

1

(1) Rebuilt, Eimco 5 ton truck, model D5-4A

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Eimco

985T-15

1

15 ton u/g haul truck

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Eimco

985T-15

1

Eimco 985T-15 Rock Truck, Deutz F8L413 diesel, Wet disc brakes, Power Shift Transmission

Mark Alexander

705-671-2100

mark@minesource.com

Eimco

980T10

1

1- Eimco 980T10 10 ton 4WD articulated new Deutz 1013 engine

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

EJC

415

1

Deutz F8L413FW, ROPS, good runner

Mark Levin

303.567.4174

mark.levin@minenv.com

EJC

415C

1

EJC 415C F8L413,LCB,REWIRED,GOOD RUNNER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

416

1

Haulage truck, NEW Tier 3 Cummins QSB engine

Frank Crites

807-221-4670

sales@resequip.com

EJC

416

2

(2)"Available, Eimco Jarvis Clark 16 ton trucks, 1995-1996, 1 unit completely rebuilt with new Cummins tier 3

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

EJC

416

3

Deutz F8L413FW, ROPS, good runner

Mark Levin

303.567.4174

mark.levin@minenv.com

EJC

416

B30-577

1

EJC 416 TRUCK,POSI,NO ENGINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

416

4141

1

EJC 16, core Truck

Randy Size

780-469-5677

rsize@amt-inc.ca

EJC

416D

3918

1

EJC 416D truck, 1995

Randy Size

780-469-5677

rsize@amt-inc.ca

EJC

417

B30-612

1

SANDVIK EJC417,POSI,OROPS,DDEC 40,19D,92"W

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

417

4605

1

EJC 417 Truck used

Randy Size

780-469-5677

rsize@amt-inc.ca

EJC

426

B30-596

3

EJC 426 TRUCK,F12L413,DRY DISC,5420,2100X25@95%MICHILINS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

430

2

30 ton u/g haul truck, series 60

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

EJC

430

2

EJC 30 Haulage Truck with Regular Box

Joelle Garside

705-855-4254

joelle.garside@tesinc.ca

EJC

430

B30-598

3

EJC430 TRUCK,DDEC,POSI, REBUILT,2100X25

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC

430

4204, 4313

2

EJC 430 Haul Truck , Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

EJC

533

4691, 4698

2

EJC 533 Haul Truck , 2009

Randy Size

780-469-5677

rsize@amt-inc.ca

Elmac

10 ton

4664

1

YMC 472T10 10 Ton Truck 2006, Spokane

Randy Size

780-469-5677

rsize@amt-inc.ca

Elmac

D10

2

2- Elmac D10 10 ton dump trucks 4WD articulated

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Getman

5TA

1

GETMAN 5TA DUMP TRUCK

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Hagglund

HT12/90

B30-585

1

HAGGLUND HT12/90 12TON,DEUTZ,EOD,MPS,4 WHEEEL STEER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Hagglund

HT12/90

B30-586

1

HAGGLUND HT12/90 TRUCK,CHAIN CONVEYOR DUMP

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

J&S

DTX4100M

1

Ready to Go Underground Dump Truck Like New – 21.5 Hours, 14,000lbs Capacity, Liquid Cooled Mercedes

Martin Short

705-682-2084

mshort@waldenequipment.ca

Jarvis Clark

JDT413

1

JARVIS CLARK JDT 413 (TJ25)

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Jarvis Clark

JDT415

1

JARVIS CLARK JDT-415 DUMP TRUCK LESS

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Jarvis Clark

JDT426

1

JARVIS CLARK JDT-426 DUMP TRUCK

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Jarvis Clark

JDT426

09415

1

U/G ROCK TRUCK

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

JCI

2604

B30-516

2

JCI 2604 TRUCK (636)@6V92DDEC

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

JDT

426

1

JDT 426 Condition: Used Reference: Unit# MT-06

Dave Stobie

807 826 1112

dave@manroc.com

JDT426

JDT426

4216, 4290

2

JDT 426, 1995 and 1990

Randy Size

780-469-5677

rsize@amt-inc.ca

Kiruna

50TON

B30-530

1

KIRUNA ELECTRIC 50TON HAUL TRUCK PARTS MPS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

MTI DT 3302EJ Truck 2009

Randy Size

780-469-5677

rsize@amt-inc.ca

MTI

B30-601

B30-605

B30-519

The Mining Equipment Prospector p.25 3302EJ 4387 1


JCI

2604

JDT

426

B30-516

JDT426

Make Kiruna

JDT426

Model 50TON

4216, 4290

MTI

3302EJ

4387

RDH

26T

RDH

HAULMAS

Sandvik

40D

Sandvik

2

JCI 2604 TRUCK (636)@6V92DDEC

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

1

JDT 426 Condition: Used Reference: Unit# MT-06

Dave Stobie

807 826 1112

dave@manroc.com

2

JDT 426, 1995 and 1990

Randy Size

780-469-5677

The Mining Equipment Prospector p.26 S/N B30-530

Underground Trucks

Qut. 1 Description KIRUNA ELECTRIC 50TON HAUL TRUCK PARTS MPS

Contact Kevin McDowell

Telephone 705-566-8190

rsize@amt-inc.ca

E-mail kevin_m@bmcdowell.com

1

MTI DT 3302EJ Truck 2009

Randy Size

780-469-5677

rsize@amt-inc.ca

1

RDH 26 ton truck, low hours, s/n 1337 Ready to Go

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

14-1317, 14

2

HAULMASTER 800-30 , ARTICULATED MINING TRUCK 30T, good running condition, 1086 and 1295 hours

Éric

418-872-0600

Eric.Packwood@ebcinc.com

B30-604

2

SANDVIK TORO 40D 27040176,LCB,CAB,DDEC

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

EJC 416

1

Sandvik EJC 416 Truck Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Sandvik

EJC 426LP

2

2- Sandvik EJC 426LP! 70 inch high Trucks! enclosed cab

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Sandvik

EJC430

1

(1) Sandvik EJC 430 U/G Truck

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Sandvik

JDT 415

1

(1) 15 Ton, Mercedes 904

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Sandvik

TH320

1

20 TON HAUL TRUCK, sn TH320-4405, hours 3474, good operation condition

Mark Alexander

705-671-2100

mark@minesource.com

Sandvik

TH430

B30-613

1

SANDVIK TH430 2012,T230D031,PARTS,KESSLER D91,EOD,CAB, PARTS MACHINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

TH533

4368

1

Sandvik TH533 Truck 2011 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

TH540

4366, 4696

2

Sandvik TH540 Truck 1x 2010, 1x 2011 used, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Sandvik

Toro 50D

9980, 9989,

6

Toro 50D Dump Truck, 1998 to 2009 Irland

Randy Size

780-469-5677

rsize@amt-inc.ca

TAMROCK

EJC420

1

1- 20 ton cap. truck, with series 50 engines, year 1999

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

TAMROCK

JDT 426

09441

1

PIPE TRUCK

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

TAMROCK

JDT 426

B30-504

2

JDT 426,F12L413

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TORO

40D

B30-560

2

TAMROCK TORO 40D,CAT POWER,CAB

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Transteq

UMT 10

1

TransTeq UMT 10 Ton Truck, New Condition, Engine: Kubota V3800DI-T rated at 85.5 hp

Mark Alexander

705-671-2100

mark@minesource.com

Transteq

UMT 5

2

Two (2) TransTeq Model UMT 5 Ton Truck, New Condition, Engine: Deutz F4L 914 rated at 60 hp

Mark Alexander

705-671-2100

mark@minesource.com

Wagner

MT-2010

3

Atlas Copco MT-2010, year 2007, Rebuilt Cummins QSL9, SAHRtm Brakes, Low Hours, Ready to Go

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Wagner

MT-416

1

1 - Wagner MT416 w/Mercedes engine, Clark powertrain, 650 hrs since rebuilt

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Wagner

MT-416

1

Wagner MT416, Rebuilt Ready to go

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Wagner

MT-420

B30-606

1

WAGNER MT420, CAB, a/c,MERC,457 ROCKTORQUE,1600R25

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

MT-420

B30-607

1

WAGNER MT420 WATER TRUCK DB05P0260,DDEC40,ROCTORQUE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

MT-426

1

WAGNER MT-426HAUL TRUCK

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Wagner

MT-426

2

26 Ton Truck, (1 DDEC, 1 DEUTZ)

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Wagner

MT-426

3

Wagner MT426

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Wagner

MT-426

B30-540

1

WAGNER MT426 ENG/BOX/TIRES FRAME ONLY

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

MT-426

DB0701720,

2

ARTICULATED MINING TRUCK 26T, good running condition, 219 and 336 hours

Éric

Packwood

418-872-0600

Eric.Packwood@ebcinc.com

Wagner

MT-430

DB0700206 ,

2

ARTICULATED MINING TRUCK 30T, good running condition, 479 hours

Éric

Packwood

418-872-0600

Eric.Packwood@ebcinc.com

Wagner

MT-433

651,692,

2

30 Ton Truck 1 good runner ready to go, s/n 651, 692

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Wagner

MTT420

B30-528

1

WAGNER MTT420@F8L413,DRUM BRAKE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

MT-439

1

1 - only Wagner MT439 u/g truck w/new Detroit engine series 60, completely rebuilt

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Young Buggy

UMT 5

1

UMT 5 Ton (Young Buggy), Refurbished, Hours: 131.5, Engine: Deutz air cooled

Mark Alexander

705-671-2100

mark@minesource.com

Young's

470

2

2- Young's 470 10 ton dump trucks 4WD articulated

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Young's

5 ton

2

2- Young's 965 5 ton Young Buggies 2WD

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Young's

7 ton

2

2- Young's 967 7 ton Young Buggy 2WD

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Young's

7 ton

1

1- Young's 470T7DBA 7 ton 4WD articulated

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Young's

12 Ton

1

1- Young's 474T12DBA 12 ton 4WD articulated

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Youngs

7 TON

1

(1) Good used, Youngs’ Machine 7 ton Youngs’ Buggys, 2010/2011, model 965-7

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Make Make

Model Model

Alimak Raise

System

1020, 1021

Packwood

Drills and Bolters

RBM11-14

S/N # Serial B70-503

Atlas Copco Atlas Copco

1 BOOM

B20-518

Qut. Qut Description Description:

DRILLS AND BOLTER

Contact Contact:

Telephone Telephone:

E-mail e-mail:

1

RBM11-14 ROOF Bolter,F6L912,rockwell axles

1

complete system with two STH-5L climbers, rail, decks, etc. Call or email for complete list.

Mark Levin

303.567.4174

mark.levin@minenv.com

1

ATLAS COPCO DRILL JUMBO ON GETMAN 800DJC

Scott Pillar

269-628-5605

pillar@pillarmfg.com

1

Copco E/H 1 BOOM H210,575v,12'steel,aluminum feed,newer panel

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com


Alimak Raise

System

Atlas Copco

1

complete system with two STH-5L climbers, rail, decks, etc. Call or email for complete list.

Mark Levin

303.567.4174

mark.levin@minenv.com

1

ATLAS COPCO DRILL JUMBO ON GETMAN 800DJC

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Atlas Copco

1 BOOM

B20-518

1

Copco E/H 1 BOOM H210,575v,12'steel,aluminum feed,newer panel

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

2 BOOM

B20-522

1

Copco 2 BOOM E/H JUMBO,BUT28 Booms,575V,Aluminium feeds,HAD 1032'S,640 carrier

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

2 BOOM

B20-583

1

ATLAS COPCO AIR 2 BOOM

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

235

104

1

Atlas Copco 235 Bolter / 35PL Bolting Rig on DC 15C Carrier, 2006

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

282

1

Atlas Copco 282 standard equipped jumbo

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas Copco

282

1

Low Hour 2012 Atlas Copco 282 Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

282

1

1 - Rocket Boomer 282, 2 boom Jumbo, BMHT 14’ feeds, year 2007, serial AVO07A447, c/w two COP 1838 ME

Robinson Castro

+56 02-273 476 14

rrcastro@tie.cl

Atlas Copco

282

4882

1

Atlas Copco 282 Boomer 2014

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

3 BOOM

B20-633

1

ATLAS COPCO 3 BOOM Jumbo

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

322

3

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas Copco

322

1

Overhaul 2014, Converted to 282 from Operators controls forward. New electrical panel and wiring. Excellent

Warren Cayen

705-692-2204 x

WCayen@technicagroup.com

Atlas Copco

351 - Bolter

1

1 drill boom w/tele. feed, 1 manbasket, Deutz F6L912W. Canopy. Getman 640 carrier. Low hours, needs

Mark Levin

303.567.4174

mark.levin@minenv.com

Atlas Copco

35B

4676

1

Atlas Copco Bolter, 1994

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

Boltec S

4885

1

Atlas Copco Boltec S 2014

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

Bolter

3855

1

Atlas Copco Cable Bolter MN657

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

Boomer

ID0766

1

Atlas Copco Boomer with 3 drilling arms, engine - 1200 hours, Hammer 1 - 1560 hours, Hammer 2 - 1510 hours, Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

Atlas Copco

Cable

B70-506

1

COPCO E/H CABLE BOLTER,Getman carrier 640,no drill

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

D3

4624, 4634

2

Atlas Copco D3 Drill 2007

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

E2C

1

Unit in pieces, T-feeds, 1838 drills, Boom basket. Good condition 500 hours

Warren Cayen

705-692-2204 x

WCayen@technicagroup.com

Atlas Copco

H104

2

Atlas Copco Rocket Boomer 104 standard equipped

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas Copco

H104

1

Reconditioned Atlas Copco H104 Rocket Boomer, 1238 drill

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

H104

4549

1

Atlas Copco H104 Single boom Jumbo, 2000

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

H210

B20-517

1

Copco H210 E/H 1 Boom,m30,460v,BUT35AH boom,8'steel,rotary drill,std shift,rockwell axles,mps

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

H227

B20-628

1

ATLAS COPCO H227 JUMBO 000946

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

H273C

B20-632

1

ATLAS COPCO H273C

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

H281

1

Atlas Copco H281 jumbo w/1 boom,1238 drill

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Atlas Copco

H322

1

2 Boom Jumbo, 1838 Drifters

Frank Crites

807-221-4670

sales@resequip.com

Atlas Copco

H322

1

Atlas Copco two boom electric/hydraulic, model H-322

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Atlas Copco

H4353

3858, 3859

2

Atlas Copco H4353 Jumbo used, Sudbury, ON

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

H4353

B20-549

2

Atlas Copco Simba H4353 Long hole drill,4"x135',575v,1995,p/s,deutz,18000kg

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

L2C

4

ATLAS COPCO L2C, Built: 2005, Serial No.: AVO 05A 052, Low hours

Wolfgang Stroebitzer

+43-7232-34552-0

office@alba.at

Atlas Copco

L2C

1

2006 Atlas Copco L2C

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas Copco

L2C

1

Good Used Atlas Copco L2C, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

L2C

B20-627

1

ATLAS COPCO L2C DRILL AV099A014

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

L2C

4009

1

Atlas Copco L2C jumbo drill, 1999

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

L3C

1

ATLAS COPCO L3C, Built: 2002, Serial No.: AVO 02A 027

Wolfgang Stroebitzer

+43-7232-34552-0

office@alba.at

Atlas Copco

LC

4582

1

Atlas Copco Bolter, 2011

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

Longhole

B20-585

1

ATLAS COPCO LONGHOLE BUGGY

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

M2C

1

Atlas Copco Rocket Boomer M2C, year 2007, Low Hours, Like New, Ready to Go

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas Copco

M2C

1

Good Used Atlas Copco M2C, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

M2C

B20-589

1

ATLAS COPCO M2C BOOMER 1000V, 2XTELEFEED, CAB

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

M2C

B20-618

1

ATLAS COPCO M2C

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

M2C

4296, 4297

2

Atlas Copco M2C Jumbo, 2x 2011

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

M2D

AVO00A169

1

2 units to be sold 2010 & 2011 build, s/n AVO00A169 & AV011A209

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

Atlas Copco

M2D

4908 4214

2

Atlas Copco M2D Jumbo Drill,

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

M7C

9978

1

Atlas Copco M7C Bolter, 2008

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ML2D

AVO07A427

1

2 x units to be sold 2007 build, s/n AVO07A427 & AVO07A408

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

Atlas Copco

ROC612

B20-597

1

ATLAS COPCO ROC612 HYD DRILL,needs engine work,no drill

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

Rocket

1

Atlas Copco Rocket Simba Longhole Production Drill, Type: H2740, CAT 3304 PC, 4 cyl., 600 volt

Mark Alexander

705-671-2100

mark@minesource.com

The Mining Equipment Prospector p.27

Atlas Copco Rocket Boomer 322 standard equipped


Atlas Copco

M2D

4908 4214

2

Atlas Copco M2D Jumbo Drill,

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

M7C

9978

1

Atlas Copco M7C Bolter, 2008

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

ML2D

AVO07A427

1

2 x units to be sold 2007 build, s/n AVO07A427 & AVO07A408

Tony Newnham

Contact Kevin McDowell

+ 61 (0)8 9201

Telephone 705-566-8190

The Mining Equipment Prospector p.28 S/N B20-597

Drills and Bolters

Model ROC612

Atlas Copco

Rocket

1

Atlas Copco Rocket Simba Longhole Production Drill, Type: H2740, CAT 3304 PC, 4 cyl., 600 volt

Mark Alexander

705-671-2100

Atlas Copco

S1D

1

Jumbo Boomer S1D year 2010; BMHT Feed 14´; with COP 1838 ME AVO10D398E

Robinson Castro

+ 56 02-273 476 14 rrcastro@tie.cl

Atlas Copco

S1D

B20-636

1

Atlas Copco S1D jumbo ,telefeed 8/14',2238 AV010A3688991874900

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

S1D

4650

1

Atlas Copco S1D 2010

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

S1L

4380

1

Atlas Copco S1L Jumbo 2010 Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

SD7 Drill

4883

1

Atlas Copco SD7 Drilll 2014

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

Simba

4226, 4730

2

1- Atlas Copco Simba H1254 Drill , 2010 Edmonton 1- Atlas Copco Simba core unit, 1994, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

T1D

4544

1

Atlas Copco T1D Drilling Jumbo, 2012

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

T1D

B20-629

1

ATLAS COPCO T1D JUMBO 2012,Cab,1838ME,AV012A263

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

322-1B

AV0095A07

1

TUNNEL JUMBO * , good running condition, 2990 hours

Éric

418-872-0600

Eric.Packwood@ebcinc.com

Boart

BCI 2

B20-586

3

BOART BCI 2 LONGHOLE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Boart

RAIL jumbo B20-590

1

BOART 2 BOOM RAIL jumbo+ basket boom

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Boart

Tunnel

1

Boart 2-boom s/n 87011

Gervais Gagnon

450-467-2277

mineteq@videotron.ca

Boart

Tunnelmast B20-528

1

BOART TUNNELMASTER E/H 2 BOOM+basket,f6l912,clark,ford,575V

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Cannon

1 BOOM

B20-567

1

CANNON 1 BOOM,diesel or electric jumbo,20X26'Coverage,904,76"W,10' Steel,CH38 Drill,440v/60

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Cannon

DP12N

B20-565

2

CANNON DP12N HDE,1 boom jumbo,MERC 174HP, 440V/60H,CH38 DRILL

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Chicago

#8 core drill

1

Skidmounted Lightweight core drill, with aluminum mast, Lister diesel needs rebuilt or replaced.

Mark Levin

303.567.4174

mark.levin@minenv.com

Chicago

CP-65 Core

2

Pneumatic column mount core drill

Mark Levin

303.567.4174

mark.levin@minenv.com

Cmac

P-LH

1

1- CMAC 2000 P-LH"2008 Long hole buggy"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CMS

2 BOOM

B20-614

1

CMS 2 BOOM E/H JUMBO (1 FEED)

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Core Drill

B-24

86047

1

Core Drill, 4x4 buggy mounted

Merle Hoover

570-966-7312

info@ewdrilling.com

Cubex

5200

1

Low Hour 2012 Cubex 5200 Drill., Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Cubex

Aires

1

Low Hour 2012 Cubex Aires Drill., Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Deilmann

BTR L2

1

Deilmann Haniel BTR L2, Built: 2003 Serial No.: 808, 1500 Hours, 1432 Cop drills

Wolfgang Stroebitzer

+43-7232-34552-0

office@alba.at

Driftech

3000

B20-638

1

Driftech 3000 Long Hole Drill Buggy with S36IR Drill

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Furukawa

2 BOOM

B20-521

1

FURUKAWA 2 BOOM E/H JUMBO,575V, 6 CYL DEUTZ

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Gardner Denver

Minibore

1

Single boom, Deutz F3L912W, PR-55, fire suppression, good condition

Mark Levin

303.567.4174

mark.levin@minenv.com

Gardner Denver

MK35

1

2 Boom Jumbo ref # 1037

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

Gardner Denver

MK35

1

Gardner Denver MK35 2 boom jumbo Drill, 575v

Mark Alexander

705-671-2100

mark@minesource.com

Gardner Denver

MK35P

2

GARDNER DENVER MK35P 2 BOOM

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Gardner Denver

UNIVERSA

1

GARDNER DENVER UNIVERSAL 3 DRILL

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

MK23

1

GARDNER DENVER MK23 J31176,GETMAN 440 carrier,F6L912,P/S,Ford LCB

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Ingersoll Rand

DM45

1

Ingersoll Rand, Rotary drill, low air

Doug Edmondson

705-682-0687

Doug@southbaydesign.ca

J&J Machine

Longtom

1

2-Boom, setup for GD style drills, on pneumatic wheeled skid steer carrier

Mark Levin

303.567.4174

mark.levin@minenv.com

J&J Machine

Longtom

1

2-Boom, setup for GD style drills, on skid to be moved with LHD

Mark Levin

303.567.4174

mark.levin@minenv.com

Jarvis Clark

MJM20B

1

JARVIS CLARK MJM20B,2 BOOM AIR

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Joy

CD71 A

2

JOY CD71-A FACE DRILL

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Joy

HS-15 Core

3

Pneumatic column mount core drill, similar to CP or LY-65.

Mark Levin

303.567.4174

mark.levin@minenv.com

Joy

RDB8 B

2

JOY RDB8-B ROOFBOLTER

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Joy Global/mti CDJ-114N

4

(4) Available, Joy Global/MTI Vein Runners, 3 units rebuilt by MTI in 2011, with additional $120K usd. in unused

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Lodril

LM-50

1

Komatsu PC 220-3 year 1989 S/N 23706, 11,000 hrs complete with LoDril LM-50 year 1998 S/N LOD 982008.

Gerald Legault

705-671-7100

gerry.breakersdrills@vianet.ca

Longtom

3 Boom

1

2 only - 3 boom Long Tom, rail mounted

Mark Alexander

705-671-2100

mark@minesource.com

Maclean

748

1

Long Tom Drill, Two Boom, Pneumatic Drive, GD S83 / Midwestern Drill Adaptors (other avail.)

Dan Stern

705-445-5707 x256 dstern@macleanengineering.com

MacLean

914

1

MACLEAN 914 Bolter F6L912,STD Trans,Ford,solid arm,LCB,Compressor

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

MacLean

928

1

Bolter 928, remanufactured unit, Pilot operated RDS, Unit wired for 575 volts, 1 V-Twin Atlas Copco compressor, Joelle Garside

705-855-4254

joelle.garside@tesinc.ca

MacLean

928

1

MACLEAN 928 BOLTER RUNNER,NO DRILL,

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

MacLean

928 Bolter

2

Both Rebuilt in 2011. Setup for Copco 1132 & 1025 drills. Good condition, 500 hours

Warren Cayen

705-692-2204 x

WCayen@technicagroup.com

B20-529 B20-520

B20-599

B70-526 B20-607

Qut. 1 Description ATLAS COPCO ROC612 HYD DRILL,needs engine work,no drill

gesad4@g-es.net

Make Atlas Copco

Qty 1 Tunnel jumbo, F6L912W , 5M rods, HD-150 drifters. For refurbishing or

Packwood

E-mail kevin_m@bmcdowell.com mark@minesource.com


MacLean Longtom MacLean Maclean MacLean MacLean MacLean MacLean MacLean MacLean MacLean MacLean MacLean MacLean MacLean MacLean MTI MacLean MTI MacLean MTI MacLean MTI

928

928 Blockholer 928 Bolter MEM-928

B20-604 B20-607 B20-606

Blockholer Driftrunner

B20-606

2 1

MEM-928 SR360-T

B20-604 4621, 4622

Driftrunner 360 Vein Runner CD360M

Vein CDJ-H4 360 CJ240

CD360M CJ240

CD360M Vein Runner

B20-608 B20-537 B20-539

Vein Runner Titanium BHJ-25D

RDH Sandvik

100 07-527

RDH Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik Sandvik

Sandvik Sandvik /

Sandvik Sandvik/seco

`1 1 1 3 1 1 1 2 1 2

B20-537 B20-613

2 1

B20-608 B20-612 B20-539

CJ240 200DEH

MTI/JOY Rock-tech RDH

2 1

B20-577

MTI RDH

CJ240 100

1 1

3 1

CDJ-H4 Roof Bolter B20-577 4249

RDH Sandvik

2 2

4859

963 CD360

MTI Oldenburg

Oldenburg Resemine Sandvik

1 2 1 `1

SR360-T CD360M

MTI RDH

1 1

946 MEM-SSB

MTI MTI

MTI MTI/JOY

705-445-5707 dstern@macleanengineering.com 705-692-2204 x256 x WCayen@technicagroup.com

1 1

4621, 4622

MTI MTI

Long Tom Drill, Two Boom, Drive,& GD S83 / Midwestern Drill Adaptors (other avail.) Both Rebuilt in 2011. Setup Pneumatic for Copco 1132 1025 drills. Good condition, 500 hours

B70-526

928 963

CD360 Vein

MTI MTI

1 2

914 946

748 928 Bolter

MTI MTI

MTI MTI

705-855-4254

1 1

4859

MTI MTI

Bolter 928, remanufactured unit, Pilot operated RDS, Unit wired for 575 volts, 1 V-Twin Atlas Copco compressor, Joelle Garside

B20-607

MEM-SSB Vein Runner

MTI MTI

1

3 Boom 928

B20-612 4159 B20-613

Roof Bolter 4249 MUKI 44 06-226 B70-523 4159 B70-513

1 3 2 4 1 1 3 1 1 1

4246, 4640

1 1 1 1 1 1 1 1 1 2

4887 B20-605

1 1

DS530 H206T

4771 B20-591

EC-3 HS205

4246, 4640 B20-630 B20-603

H1008RA HS205L

B20-605 B20-631

H206T Mercury

B20-591 4793, 4610

H205D MB670

HS205 Quazar

HS205L Quazar

MB670 ROBOLT

B20-630 100

B20-631 100 B70-524

Mercury 4610 SOLO 1000 4793, B20-616 Quazar SV 1006 Quazar AXERA

09442 106D9071-1

ROBOLT Quasar NV B70-524 SOLO 1000 B20-616 Mercury

2 - only Maclean MEM-928 rock bolter w/Deutz BF4M-1013C engine MTI SR360-T In-the-hole Drill, compressor not included. Maclean MEM-SSB 2011 SPDD Vein Runner,Bolter, YU1200 Diamond Drill

MTI CD360 used Edmonton 3- MTI Vein Drill, Runner IPs2008 Diesel over hydraulic drill jumbos Cummins engine MTI boom Driftrunner jumbo, Deutz 1013 engine, HC80 drills MTI 2 360 CRAWLER DRILL

MTI In-the-hole compressor not included. DRILL 4", 575Volt,5' MAST, 26"SLIDE MTI SR360-T CD360M ITH IN THEDrill, HOLE ELECTRIC CRAWLER SPDD Vein Runner, YU1200 Diamond Drill MTI CD360M ITH CRAWLER DRILL,MPS

3MTI Vein Runner IPs Diesel over SMALL hydraulicTELEFEED drill jumbos Cummins engine MTI CDJ-H4, E/H 1 BOOM JUMBO MTI CRAWLER MTI 360 CJ-240 JUMBO DRILL

MTI ITH IN JUMBO THE HOLE ELECTRIC DRILL 4", 575Volt,5' MAST, 26"SLIDE MTI CD360M CJ240 2 BOOM E/H,HC80 DrillsCRAWLER rebuilt

MTI CD360M ITH CRAWLER DRILL,MPS CDJ-114N single boom jumbo, elec/hyd, HC50 Drill, F4L912 Deutz engine, 3 of the 4 rebuilt/upgraded by MTI in MTI CDJ-H4, 1 BOOM JUMBO SMALL TELEFEED Cannon Roof E/H Bolter 2004, Edmonton MTI JUMBO RDHCJ-240 100 Jumbo, 2010

MTI CJ240 200 2 BOOM E/H,HC80 Boltmaster DEH JUMBO Rebuilt ref# 1286 Drills rebuilt

1 1 2 2 1 1 1 1 1 1 2 3 1 2 1 1 1 1 3 1 2 1 1 1 1 1 1 1 1 1

Cannon Roof Bolter 2004, Edmonton 1New Resemin Muki FF c/w Montabert HC50 drifter Sandvik E/H Robolt 06-226,cab,BF4M1013,2005,79"W,TUC310,480v/60h

Boltmaster 200 DEH Rebuilt ref#L03B3673,575V/70kw,200 1286 Sandvik Mercury 1B E/H Bolter, DRILL,2003,like new

Drill Master 150DH 2008, Mercedes Benz 904 Series, Montabert HC50 drill, excellent condition (1) Sandvik 320-24 Blockhole, Robolter consignment Sandvik E/H Robolt 2 boom Jumbo, year06-226,cab,BF4M1013,2005,79"W,TUC310,480v/60h 2000, drifters Sandvik 510B, good operating condition

Sandvik E/H In-the-hole Robolter 07-527,Cab,7' rebar,575V/60h/60kw,Injection Cubex Aries drill, MEM-944 carrier, s/n 10136, Mercedes28mm,2001,ZRU707,BH21 940 engine, SAHR brakes Sandvik 1B E/H Bolter, L03B3673,575V/70kw,200 DRILL,2003,like new Sandvik Mercury DS311 2011 (1) Sandvik 320-24 Robolter Sandvik DS311-D-EC, 2013 consignment

2 boom Jumbo, year 2000, Sandvik 510B, good operating condition Sandvik/EJC/ DS510 Bolterdrifters 2x 2008 used Edmonton

Cubex In-the-hole SandvikAries DS530 Jumbo drill, 2009MEM-944 carrier, s/n 10136, Mercedes 940 engine, SAHR brakes Sandvik DS311 SANDVIK EC-3 32011 BOOM AIR JUMBO

Sandvik DS311-D-EC, 2013 SANDVIK H1008RA DATASOLO Longhole DRILL

Sandvik/EJC/ DS510 Bolter95D241A,powerclass,575v/60h 2x 2008 used Edmonton SANDVIK H205D 2 BOOM

Sandvik DS530 2 Jumbo 2009 Sandvik H206T, Boom+Basket Boom (TBB),1000V/50H,ZRU1000,TF500-16,55KW,1997 SANDVIK EC-3 3 BOOM AIR JUMBO (1) 2001 ELECTRIC/HYDRAULIC, 2 boom, HL510 B, 16ft SANDVIK DATASOLO Longhole DRILL SANDVIK H1008RA HS205L, 91D280A,good condition,575v/60h

SANDVIK H205D MB670 2 BOOM 95D241A,powerclass,575v/60h Sandvik Tamrock Bolter 2007

Sandvik Boom+Basket Boom (TBB),1000V/50H,ZRU1000,TF500-16,55KW,1997 Sandvik H206T, Mercury2 Bolter 2003, Edmonton

(1) 2001 ELECTRIC/HYDRAULIC, 2 boom, 2004-2005, HL510 B, 16ft Reconditioned, Tamrock Quazar, elec/hyd, with rebuilt spare HXL5 drifter, and additional $40K usd. SANDVIK HS205L, 91D280A,good condition,575v/60h Secoma Quazar single boom diesel/hydraulic

Sandvik MB670 Bolter 2007 head for 7' Rebar,575V Sandvik Tamrock E/H ROBOLT 07,CAB,BH21 Sandvik Bolter 2003, Edmonton SANDVIKMercury SOLO 1000

Reconditioned, Tamrock Quazar, elec/hyd, 2004-2005, with rebuilt spare HXL5 drifter, and additional $40K usd. LONGHOLE DRILL Secoma Quazar single boom diesel/hydraulic AXERA T08 S-290 C, TUNNEL JUMBO * , good running condition, 562 hours

Sandvik E/HCummins ROBOLTQSB 07,CAB,BH21 head 350, for 7'hydraulic Rebar,575V Full Diesel, 4.5, Hydrastar ROPS canopy, fire suppression, 6/10 telescopic feed SANDVIK SOLODeutz 1000F3L912W, 480Volts, Hydrastar 200, hydraulic ROPS canopy, fire suppression, swellex Mercury Bolter,

The Mining Equipment Prospector p.29 Sandvik SV 1006 1 DRILL Sandvik/seco Pluton 19 - 09442 1 LONGHOLE Deutz F6L012W, Hydrastar 200s, Screen handling arm, carousel setup for 8' split sets

Sandvik

AXERA

106D9071-1

Kevin McDowell Mike Deziel

Ghislain Grondin Mark Alexander Randy Size Mark Alexander

Randy Size Vanessa Young

Mike KevinDeziel McDowell Mark KevinAlexander McDowell Mark KevinAlexander McDowell Vanessa Young Kevin McDowell Kevin Kevin McDowell McDowell Kevin Kevin McDowell McDowell Kevin Frank McDowell Crites Kevin RandyMcDowell Size Kevin RandyMcDowell Size

Kevin McDowell Jeannot Courchesne

705-566-8190 780-469-5677 705-566-8190 705-966-2505 819-825-6222 705-671-2100 780-469-5677 705-671-2100

780-469-5677 (435)587-2292 705-966-2505 705-566-8190 705-671-2100 705-566-8190 705-671-2100 705-566-8190

(435)587-2292 705-566-8190 705-566-8190 705-566-8190 705-566-8190 705-566-8190 705-566-8190 807-221-4670 705-566-8190 780-469-5677 705-566-8190 780-469-5677 705-566-8190 705-857-2154

WCayen@technicagroup.com ggrondin@em2000.ca

tim@mcdowellequipment.com rsize@amt-inc.ca kevin_m@bmcdowell.com rsize@amt-inc.ca

kevin_m@bmcdowell.com dezielrepairsinc@bellnet.ca ggrondin@em2000.ca mark@minesource.com rsize@amt-inc.ca mark@minesource.com

rsize@amt-inc.ca youngsmachine@frontiernet.net dezielrepairsinc@bellnet.ca kevin_m@bmcdowell.com mark@minesource.com kevin_m@bmcdowell.com mark@minesource.com kevin_m@bmcdowell.com

youngsmachine@frontiernet.net kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com sales@resequip.com kevin_m@bmcdowell.com rsize@amt-inc.ca kevin_m@bmcdowell.com rsize@amt-inc.ca

kevin_m@bmcdowell.com sales@rdhminingequipment.com

rsize@amt-inc.ca kevin_m@bmcdowell.com

DS311-D-EC H1008RA

DS510 H205D

MACLEAN MTI 2 boomBLOCKHOLER Driftrunner jumbo, Deutz 1013 engine, HC80 drills

Kevin RandyMcDowell Size

1-602-885-6560 780-469-5677

780-469-5677 705-566-8190

4771

4886 B20-603

MACLEAN MTI CD360963 Drill,BLOCKHOLER used 2008 Edmonton

kevin_m@bmcdowell.com kevin_m@bmcdowell.com

705-692-2204 819-825-6222 x

joelle.garside@tesinc.ca kevin_m@bmcdowell.com

Randy Size Kevin McDowell

1 1

DS311 EC-3

Tim McDowell Randy Size

Warren GhislainCayen Grondin

705-566-8190 705-566-8190

RDH 100E/H Jumbo, 201007-527,Cab,7' rebar,575V/60h/60kw,Injection 28mm,2001,ZRU707,BH21 Sandvik Robolter

B70-527 4886

Cubex DS530

(1) Maclean 946 Bolter complete Maclean MEM-SSB Bolter, 2011 7’ width

Both Rebuilt in 2011. Setup for Copco & 1025 drills. Good condition, 500 hours 2 - only Maclean MEM-928 rock bolter1132 w/Deutz BF4M-1013C engine

kevin_m@bmcdowell.com tim@mcdowellequipment.com

705-855-4254 705-566-8190

1 1

1B DS311

Axera DS510D06

Kevin Kevin McDowell McDowell

705-566-8190 1-602-885-6560

sales@resequip.com ricky@rock-tech.net mark@minesource.com

1 1

1 1

320-24 DS311-D-EC 4887

MACLEAN BOLTER RUNNER,NO DRILL, MACLEAN 928 BLOCKHOLER

mark@minesource.com kevin_m@bmcdowell.com

807-221-4670 705-692-7625 705-671-2100

B70-523 B70-513

Kevin McDowell Tim McDowell

Bolter 928, 963 remanufactured unit, Pilot operated RDS, Unit wired for 575 volts, 1 V-Twin Atlas Copco compressor, Joelle Garside MACLEAN BLOCKHOLER Kevin McDowell

joelle.garside@tesinc.ca

Frank Crites Ricky Lemieux Mark Alexander

06-226 Axera D06 07-527 Cubex

MACLEAN Trans,Ford,solid arm,LCB,Compressor (1) Maclean914 946Bolter BolterF6L912,STD complete 7’ width

Dan Stern Warren Cayen

705-671-2100 705-566-8190

CDJ-114N boom jumbo, elec/hyd, HC50 Drill, F4L912 Deutz engine,Remote 3 of thedrill, 4 rebuilt/upgraded by MTI in 8Drill x 12 deck single with 6,000 lbs cap.,2008, +/24” side shift, 4 x 48” stabilizers, tram from deck, Mercedes Master 150DH Blockhole, Mercedes Benz 904stroke Series, Montabert HC50 excellent condition

B70-527

BHJ-25D 320-24

Mark KevinAlexander McDowell

14 1

1 1

200DEH 1B

2 only - 3 boom Long Tom, rail mountedDRILL, MACLEAN 928 BOLTER RUNNER,NO

1

AXERA T08 S-290 C, TUNNEL JUMBO * , good running condition, 562 hours

Randy Size Ricky Kevin Lemieux McDowell

780-469-5677 705-692-7625 705-566-8190

Jeannot Courchesne Kevin McDowell

705-857-2154 705-566-8190

Kevin McDowell Mark Alexander

705-566-8190 705-671-2100

Mark Alexander Tim McDowell

Kevin McDowell Mark Alexander Kevin RandyMcDowell Size Tim McDowell Randy Size

Mark RandyAlexander Size Mark RandyAlexander Size

Randy Size Kevin McDowell Randy Size Kevin McDowell Randy Size Kevin McDowell Randy Size Kevin McDowell Kevin McDowell Tim McDowell Kevin Kevin McDowell McDowell Kevin RandyMcDowell Size Kevin RandyMcDowell Size Tim McDowell Blaze Julum

Kevin Blaze McDowell Julum Randy Size Kevin McDowell Randy Size Kevin McDowell Blaze Julum Jim Kirkbride

Blaze Julum Éric Packwood

Kevin McDowell Mark Levin Kevin McDowell Mark Levin

Jim MarkKirkbride Levin Éric

Packwood

705-671-2100 1-602-885-6560 705-566-8190 705-671-2100 705-566-8190 780-469-5677

1-602-885-6560 780-469-5677 705-671-2100 780-469-5677 705-671-2100 780-469-5677 780-469-5677 705-566-8190 780-469-5677 705-566-8190 780-469-5677 705-566-8190 780-469-5677 705-566-8190

705-566-8190 1-602-885-6560 705-566-8190 705-566-8190 705-566-8190 780-469-5677 705-566-8190 780-469-5677

1-602-885-6560 (208) 661-7510 705-566-8190 (208) 661-7510 780-469-5677 705-566-8190 780-469-5677 705-566-8190

(208) 661-7510 705-665-2227 (208) 661-7510 418-872-0600 705-566-8190 303.567.4174 705-566-8190 303.567.4174 705-665-2227 303.567.4174 418-872-0600

rsize@amt-inc.ca ricky@rock-tech.net kevin_m@bmcdowell.com sales@rdhminingequipment.com kevin_m@bmcdowell.com mark@minesource.com tim@mcdowellequipment.com kevin_m@bmcdowell.com mark@minesource.com kevin_m@bmcdowell.com mark@minesource.com kevin_m@bmcdowell.com rsize@amt-inc.ca

tim@mcdowellequipment.com rsize@amt-inc.ca mark@minesource.com rsize@amt-inc.ca mark@minesource.com rsize@amt-inc.ca

rsize@amt-inc.ca kevin_m@bmcdowell.com rsize@amt-inc.ca kevin_m@bmcdowell.com rsize@amt-inc.ca kevin_m@bmcdowell.com rsize@amt-inc.ca kevin_m@bmcdowell.com

kevin_m@bmcdowell.com tim@mcdowellequipment.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com rsize@amt-inc.ca kevin_m@bmcdowell.com rsize@amt-inc.ca

tim@mcdowellequipment.com Blazejulum55@gmail.com kevin_m@bmcdowell.com Blazejulum55@gmail.com rsize@amt-inc.ca kevin_m@bmcdowell.com rsize@amt-inc.ca kevin_m@bmcdowell.com

Blazejulum55@gmail.com jkirkbride@tracksandwheels.com Blazejulum55@gmail.com Eric.Packwood@ebcinc.com kevin_m@bmcdowell.com mark.levin@minenv.com kevin_m@bmcdowell.com mark.levin@minenv.com

jkirkbride@tracksandwheels.com mark.levin@minenv.com Eric.Packwood@ebcinc.com


Sandvik

Quazar

1

Reconditioned, Tamrock Quazar, elec/hyd, 2004-2005, with rebuilt spare HXL5 drifter, and additional $40K usd.

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Sandvik

Quazar

1

Secoma Quazar single boom diesel/hydraulic

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

The Mining Equipment Prospector p.30 Drills ROBOLT B70-524 1 Sandvik E/H ROBOLT 07,CAB,BH21 head for 7' Rebar,575V Make Model 1000 B20-616 S/N Qut. Description Sandvik SOLO 1 SANDVIK SOLO 1000 Sandvik

and Bolters

Contact Kevin McDowell

Telephone 705-566-8190

E-mail kevin_m@bmcdowell.com

Sandvik

SV 1006

09442

1

LONGHOLE DRILL

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

Sandvik

AXERA

106D9071-1

1

AXERA T08 S-290 C, TUNNEL JUMBO * , good running condition, 562 hours

Éric

418-872-0600

Eric.Packwood@ebcinc.com

Sandvik /

Quasar NV

1

Full Diesel, Cummins QSB 4.5, Hydrastar 350, hydraulic ROPS canopy, fire suppression, 6/10 telescopic feed

Mark Levin

303.567.4174

mark.levin@minenv.com

Sandvik/seco

Mercury

1

Mercury Bolter, Deutz F3L912W, 480Volts, Hydrastar 200, hydraulic ROPS canopy, fire suppression, swellex

Mark Levin

303.567.4174

mark.levin@minenv.com

Sandvik/seco

Pluton 19 -

1

Deutz F6L012W, Hydrastar 200s, Screen handling arm, carousel setup for 8' split sets

Mark Levin

303.567.4174

mark.levin@minenv.com

Sandvik/seco

Quasar

1

Deutz F3L912W, 480Volts, Hydrastar 200s, hydraulic ROPS canopy, fire suppression, split set carousel. 48 inch

Mark Levin

303.567.4174

mark.levin@minenv.com

Schroeder

CD8 2000A

1

Schroeder Cd8-2000a Face Drill

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Secoma

1 BOOM

1

SECOMA 1 BOOM D/H JUMBO-SCHOVON,DEUTZ,HYDRASTAR 200,8'STEEL,SPICER AXLES

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Secoma

Helios 12

1

Diesel Hydraulic - Deutz F5L912W, Montabert HC50, Montabert aluminum feed, needs refurbished

Mark Levin

303.567.4174

mark.levin@minenv.com

Secoma

Helios 12

1

Diesel Hydraulic - Deutz F4L912W, Hydrastar 200, needs refurbished

Mark Levin

303.567.4174

mark.levin@minenv.com

Secoma

PLUTON

B20-563

1

TAMROCK SECOMA PLUTON 1PSB Electric,Bolter with basket,deutz

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Secoma

PLUTON

B70-502

1

SECOMA PLUTON 30 BOLTER head removed parts

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Secoma

Quasar

1

1 boom Diesel jumbo, Duetz engine

Frank Crites

807-221-4670

sales@resequip.com

Secoma

QUASAR

B20-602

1

SECOMA QUASAR MERURY JUMBO

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Secoma

QUASAR

B20-635

1

EIMCO SECOMA 17 ONE BOOM DRILL P 2590

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Secoma

Quasar

1

Deutz F3L912W, 480Volts, Hydrastar 300, hydraulic canopy, fire suppression

Mark Levin

303.567.4174

mark.levin@minenv.com

Simba

H2740

1

ROCKET SIMBA, CABLE BOLTER

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

Soosan

1000E

1

hydraulic crawler drill, year 2003, comes with cab and rod changer, equipped with a Jet 9 drifter, drills 3 to 4 $

Gerald Legault

705-671-7100

gerry.breakersdrills@vianet.ca

Soosan

1300E

2

Hydraulic crawler drill, year 2005, comes with SP6 drifter, 3 to 4 % inch holes. Cab and Rod changer ready to

Gerald Legault

705-671-7100

gerry.breakersdrills@vianet.ca

Sprague &

PT-166

1

Sprague & Henwood, Core Drill, trailer mounted

Merle Hoover

570-966-7312

info@ewdrilling.com

Stu Blattner

Raise Bore

1

Stu Blattner Raise Bore machine with 10 inch steel, (260 pcs 5 ft), and cutter head

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

1

TAMROCK DRILL JUMBO ON GETMAN 640DJC CARRIER

Scott Pillar

269-628-5605

pillar@pillarmfg.com

1

TAMROCK 1 BOOM E/HJUMBO DT3199, F6L912,Hamworthy,steel feed,no drill,mps

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

1

Single Boom, Deutz F4L912W, fire suppression, good condition - HL500 drifter. In Elko yard.

Mark Levin

303.567.4174

mark.levin@minenv.com

B20-510

09460

TAMROCK TAMROCK

1 BOOM

TAMROCK

105

TAMROCK

2 BOOM

B20-525

1

TAMROCK 2 BOOM E/H JUMBO H307M, M50,F6L912,ROCKWELL,1982

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

2 BOOM

B20-526

1

TAMROCK 2 BOOM E/H JUMBO (314), Deutz,Hamworthy,LCB,NO feeds,no drills,mps

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

205D

2

2-Boom, 510 Drifters, Deutz F6L912W, 480V, low hours, one unit ready to work, other for parts or refurbishment

Mark Levin

303.567.4174

mark.levin@minenv.com

TAMROCK

AXERA

B20-600

1

TAMROCK AXERA SINGLE BOOM JUMB

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

Axera

ID1017

1

Boomer with 5 arms, Power 280 KW - 690 V, Powerpack HP560, arms have 5100-6300 hours, good condition

Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

TAMROCK

Commando 300

1

Commando 300 Drill, Yr. 2000, Rebuilt in 2007, Deutz B/FL1011, Hydr. knuckel fold-a-way boom, Tamrock drill

Mark Alexander

705-671-2100

mark@minesource.com

DH131

1

Robolter, Installed on a Sub-15 carrier. 95 % complete, carousel is optional. Spring applied brakes. Ready to go

Doug Edmondson

705-682-0687

Doug@southbaydesign.ca

TAMROCK

DH395-24S B70-508

1

TAMROCK DH395-24S Diesel Bolter+Basket,8'split sets,merc,H300/HL300,1996

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

DH495-18

B70-505

1

Tamrock Robolt DH495-18 Diesel bolter,ZR907 boom,BH18E8C Head,1.8m bolt,HE428 drill

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

DHA-1078

B20-617

1

TAMROCK DHA-1078 JUMBO 1292

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

DHA107-T

B20-571

1

TAMROCK DHA107-T one boom ,ZRU1000

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H1010RA

B20-576

1

TAMROCK DATA SOLO H1010RA longhole drill

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H102

1

TAMROCK H102 DRILL JUMBO

Scott Pillar

269-628-5605

pillar@pillarmfg.com

TAMROCK

H102

B20-507

1

TAMROCK H102 MICOMATIC E/H 1 BOOM,575V,MR300BOOM,10'STEEL

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H107LR

B20-524

1

TAMROCK MINIMATIC H107LR,480V,Clark axles drum,no boom,no feed,no drill

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H201M

B20-519

1

TAMROCK MINIMATIC 1 BOOM H201M E/H,ZRS700HR boom,no feed,clark axle drum brake

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H205

B20-509

1

TAMROCK H205 MINIMATIC 2 BOOM,M30,STD SHIFT,PR75 axles,575v,deutz,painted

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H205D

1

Tamrock H 205D, Refurbished condition, ready to work

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

TAMROCK

H207H

B20-559

1

TAMROCK H207H JUMBO,575V,MR600U,HAD 538's,std trans,deutz

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H207L

B20-523

1

TAMROCK H207L 1 BOOM E/H JUMBO,F6L912,Hamworth LCB,no feeds,no drills

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

H400-24

1

TAMROCK H400-24 DRILL JUMBO

Scott Pillar

269-628-5605

pillar@pillarmfg.com

TAMROCK

HS205L

B20-552

1

TAMROCK HS205L,2 BOOM E/H 575V,14' steel feeds,painted,M50carrier

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

HS207L

B20-532

1

TAMROCK MINIMATIC 2 BOOM HS207L,575v,14' steel feed,std trans,PR75,painted,cn,tic501 controls

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

B20-527

Packwood


TAMROCK

H400-24

1

TAMROCK H400-24 DRILL JUMBO

Scott Pillar

269-628-5605

pillar@pillarmfg.com

TAMROCK

HS205L

B20-552

1

TAMROCK HS205L,2 BOOM E/H 575V,14' steel feeds,painted,M50carrier

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

HS207L

B20-532

1

TAMROCK MINIMATIC 2 BOOM HS207L,575v,14' steel feed,std trans,PR75,painted,cn,tic501 controls

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

Mercury 1B

1

2 - Tamrock Mercury 1B Rock Bolter, 1 good runner, 1 core, spare components available

Mark Alexander

705-671-2100

mark@minesource.com

TAMROCK

MJM 20H

B20-533

2

MJM 20H, 2 BOOM, HC40 DRILLS,575,F6L912,STD,Rockwell

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

MJM10B

B20-625

1

MJM10B AIR JUMBO,F4L912,50"W,deutz, never had running,L550

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

MJM20B

1

Refirbished jumbo, F4L912W Deutz, 12 volt system, L550 Drills New, 2 extra slides

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

TAMROCK

MJM20B

1

Tamrock MJM 20B 2 boom jumbo drill, Hour Meter: 554 hours, complete with drills

Mark Alexander

705-671-2100

mark@minesource.com

TAMROCK

MJM20B

1

Narrow Vein 2 boom Jumbo, Refurbished, Deutz F4L912, 2x L550 drills

Frank Crites

807-221-4670

sales@resequip.com

TAMROCK

MJM20B

1

jumbo drill, F4L-912 Deutz diesel, 1089 hours, ROPS, 2 x 120 Drills, Rta-Boom Assemblies, ready to work

Mark Alexander

705-671-2100

mark@minesource.com

TAMROCK

MJM20B

2

Tamrock L-550 Drifters, Deutz F4L912W, runners

Mark Levin

303.567.4174

mark.levin@minenv.com

TAMROCK

MJM20B

1

(1)Sandvik MJM 20B Jumbo 4' wide, L550 drills

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

TAMROCK

Monomatic

B20-582

1

TAMROCK MONOMATIC ROCK DRILL

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

Para 360

ID1018

1

1997, Boomer with 3 arms (currently only 2 arms mounted), power 220 KW - 690/1000 V, Powerpack HP555,

Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

TAMROCK

Paramatic

B20-531

1

Tamrock paramatic 2 Boom E/H, JOB#1347,ZRU1000 Booms,14'steel feeds,F6L912

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

R107M

B20-584

1

TAMROCK R107M 1 BOOM JUMBO

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

ROBOLT

B70-501

1

TAMROCK BOLTER ROBOLT 06,BF4M1012C,Parts axle+osc removed

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

SECOMA

1134, 1135

2

Secoma Mercury 1B, 1 core 1 runner

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

TAMROCK

SOLO 606

B20-547

1

SOLO 606 LONGHOLE DRILL

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

TAMROCK

SOLO

09413

1

ROCK DRILL

jkirkbride@tracksandwheels.com

TAMROCK

T08-290

101D24481

1

TUNNEL JUMBO *, good running condition, 1200 hours

Jim Kirkbride

705-665-2227

Éric Packwood É

418-872-0600

Eric.Packwood@ebcinc.com

TAMROCK

T08S-290C ID0998

1

Boomer T08S-290C (year 2002), 3 x HLX5T, with 14" Drilling Lafettes, (2 x Lafettes Sandvik TF 500-10 (1 x

Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

TAMROCK

Zoomtrak

1

TAMROCK ZOOMTRAK CRAWLER HYD Drill,HLR438,1987,MPS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Terex

MK7

1

Terex MK7 Jumbo, Hour Meter: 1730 hours, Cat 3056E Diesel engine, 149HP

Mark Alexander

705-671-2100

mark@minesource.com

Terex

MK35

1

Terex MK35 jumbo drill, Hour meter: 1163, Deutz BF4M 1012C

Mark Alexander

705-671-2100

mark@minesource.com

Wiggins

BumbleBee

1

Tracked Single Boom GD Minibore style Jumbo Face Drill, PR-55 drill

Mark Levin

303.567.4174

mark.levin@minenv.com

Contact Contact:

Telephone Telephone:

B20-535

The Mining Equipment Prospector p.31 Make Make

Model Model

Adjustoveyor

Conveyor

1

Adjustoveyor, 15' - 48' Extendable Conveyor

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Allis Chalmers

13' X 21'

1

Mill, Ball, 13' X 21', Allis Chalmers, 2000 HP, R/L,

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com

Allis Chalmers

42-65

4261

1

Allis Chalmers 42-65 Superior Gyratory Crusher

Randy Size

780-469-5677

rsize@amt-inc.ca

Allis Chalmers

9' x 12'

4262

2

Allis Chalmers 9' x 12' Ball Mill - x 2

Randy Size

780-469-5677

rsize@amt-inc.ca

Allis Chalmers

Gygatory

1

42 x 65 Gygatory crusher 400 HP

Mark Alexander

705-671-2100

mark@minesource.com

Allis Chalmers

Slurry

3

8 x 8 x 25 Allis Chalmers SRL-XT Slurry Pumps

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Allis Chalmers

Slurry

2

8 x 6 x 18 Allis Chalmers SRL-C Slurry Pump

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Allis Chalmers

Slurry

10 98-432-130-501 Gland-Side Pump Casing for 12 x 10 x 25 SRL-C

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Arbra

10X16

B260-507

1

ARBRA 40F 10X16"JAW CRUSHER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Arbra

12X20

B260-505

2

ARBRA 50F 12"X20" JAW CRUSHER,mps

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Arbra

15X24

B260-504

1

ARBRA 15X24" JAW CRUSHER,mps

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

SBU160

26242

1

Refubished Hydraulic Breaker, Atlas Copco Model SBU160, 400 Ft Lb Class, year 2014

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

Atlas Copco

SBU202

4228

1

Refubished Hydraulic Breaker, Atlas Copco Model SBU202, 600 Ft Lb Class, year 2011

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

Atlas Copco

SBU220

0561

1

Refubished Hydraulic Breaker, Atlas Copco Model SBU220, 600 Ft Lb Class, year 2011

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

Belt Feeder

9’ x 9’ x 3’

1

1 – 30” x 15’ Inclined Belt Feeder with 9’ x 9’ x 3’ Deep Hopper. Refurbished and ready to work, NOW!

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

2

Bin, 1,440 CF, 10' X 18' X 8', 75 Ton, Cone, Sand (2)

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com

30,000 Tpd

Plant

Bin

S/N# Serial

Rock Breakers, Crushers, Mills, Processing

ROCK BREAKERS, CRUSHERS, MILLS, PROCESSING

C739789

Qut Description: Qut. Description 1 30,000 TPD Processing Plant, Endako Mine B.C.

Mark Alexander

705-671-2100

E-mail e-mail:

mark@minesource.com

BTI

CX4

4

Refubished Hydraulic Breaker, BTI Model, CX4, 400 Ft Lb Class, year 2014 and 2015

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

BTI

TB1280XC 190-1051

1

Refubished Hydraulic Breaker, BTI Model TB1280XC, 5500 Ft Lb Class, year 2010

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

BTI

TB625CM

1

Refubished Hydraulic Breaker, BTI Model TB625CM, 1500 Ft Lb Class, year 2010

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

Crushers

all size

3

Chipmunk and Atlas crushers, lab size. 3 available.

Fred Delabbio

705-560-3705

info@nelmaco.com

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Denver

6E-4325

20 Rebuilt Spare Drop-In Flotation Mechanisms - All sizes


Jeffrey

Hammermil S740537

1

includes 24-1/2 wide x 8-1/2 wide flange feed throat, leading to 24 inch wide grinding chamber, complete with

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com

BTI Knelson

CX4 Concentrat

14

Refubished Hydraulic Breaker, Model BTI Model, CX4, 400 Ft Lb Class, year 2014 and 2015 32 inch Knelson Concentrator, KC CVD32,

StevePaccagnan Archer Barry

905-673-8200 604-534-5313

Steve.archer@creightonrock.com sales@nelsonmachinery.com

BTI Lamella

TB1280XC 190-1051 thickener S740491

1

Refubished Hydraulic Breaker, BTI TB1280XC, 5500 Lb Class, yearstainless 2010 Steve Archer thickener/gravity settler, appears toModel be LGST Series 55. UnitFtconsists of (13) steel plates, measuring 98 Dominic A. Piazza

905-673-8200 415-467-3400

Steve.archer@creightonrock.com dominic@machineryandequipment.com

BTI Lochead

TB625CM Assay

51

Refubished Hydraulic Breaker, BTI2 Model 1500 Ft Lb Class, year 2010 Lochead Haggarty Drying Ovens, door, 5TB625CM, shelf

Contact Fred Delabbio Dan or Bart Hurley

905-673-8200 604-534-5313

Telephone 705-560-3705 705-682-0681

Steve.archer@creightonrock.com sales@nelsonmachinery.com

The Mining Equipment Prospector p.32

Make Crushers Marcy

Model all 5’ x size 7’

6E-4325

Rock Breakers, Crushers, Mills, Processing

StevePaccagnan Archer Barry

S/N

Qut. Description Chipmunk and Atlas crushers, size.c/w 3 available. 23 Ball Mill complete with 125 hp. lab motors, spare liners

C740223

20 Rebuilt Drop-In Mechanisms - All sizes 2 (2) Mill,Spare Ball, 22' X 38',Flotation Metso, 10,000 KW, Unused

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

E-mail info@nelmaco.com info@thehurleygroup.com

sales@nelsonmachinery.com dominic@machineryandequipment.com

C740224

1

8 x 6SAG, x 18 inch SRL-C20,000 Slurry Pump Mill, 36' XDenver 20.5', Metso, HP, Unused

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

Denver Metso

Mill, Ball

Denver Metso

SlurryMILL SAG

Dominion Mill

Ball TPD Mills 300

15

5- 12.5 15' Ball milling Mills, 1250 300 TPDXFlotation plantHP equipment package, located near Rico, Colorado.

Mark Levin Alexander

705-671-2100 303.567.4174

mark@minesource.com mark.levin@minenv.com

Dominion Moovinator

Rod Break Mills Bag

45

5- 12.5 15' Ball Mills, 1250 HPBag Break Stations, Moovinator, all stainless steel construction, complete with (4) HAFXEquipment Model 40 40

Mark Alexander Dominic A. Piazza

705-671-2100 415-467-3400

mark@minesource.com dominic@machineryandequipment.com

Dominion N/a

Ball Mill Screw

21

12.5' dia.8"Xdia. 15' X Dominion Engineering Ball Mill, 1250HP Unused 20' Stainless Screw Conveyors, 7.5 HP

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Dryer Nico

Rotary Apron

C739843

1

Dryer, 7' X 40', C/St, Bartlett Snow, System 48 x 25Rotary, Nico Apron Feeder

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Dryer Nordberg

Rotary 7'Shorthea

C739842

1

Dryer, Rotary, 7' X 33', C/St, Burner, Dust Nordberg / Symons 7' HD Shorthead ConeCollector Crusher

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Dryer Nordberg

Rotary 7'STD

C739844

21

Dryer, Rotary, 4' X 40', C/St, Skid mounted Nordberg / Symons 7' HD Standard Cone Crushers

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Feeder Nordstrong

55 X 45' Conveyor

1

Feeder, 55 in. Screw X 45', FAM, Hydraulic, Heavy Duty, 10" x 6'8"Apron, Nordstrong Conveyor

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Feeder NPK

80 X 45' E224A

1

Feeder, Belt, 80 in X 45', C/st, Hydraulic, Grizzly Refubished Hydraulic Breaker, NPK Model E224A, 10,000 Ft Lb Class,

Dominic A. Piazzai Steve Archer

415-467-3400 905-673-8200

dominic@machineryandequipment.com Steve.archer@creightonrock.com

1

Eliptex 6’5.5m x 20’dia. Horizontal Deck Vibrating Screen. 50HP, 575V Motor. Top 2”, Mid 1”, Bottom %”, All Unused X 9.15mTriple (18'x30') Outotec SAG Mill, 4500KW

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

S740518

40461

Hewitt Robins SAG Screen Outotec Mill Jacobson Outotec

hammer TC-20

S740429

61

Jacobson type hammermill / pulverizer 10Cells x 12 inlet, rotor 24 inch diameter x 13 inch wide, has 4 rows of 12 Unused Outotec TC-20, 20m3 Stainlesswith Tank

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Jeffrey Overland

Hammermil S740537 Conveyor

1

includes 24-1/2 wide x 8-1/2 wide flange dismantled feed throat,and leading to for 24 transport inch wide grinding chamber, complete with 1- 54 inch x 2,400 ft overland conveyor, ready

Dominic A. Piazza Mark Alexander

415-467-3400 705-671-2100

dominic@machineryandequipment.com mark@minesource.com

Knelson Pennsylvania

Concentrat Model CA-2

1

Knelson Concentrator, ModelCrusher, KC CVD32, 132– inch Pennsylvania Reversible Impact Model CA-2-30. 40HP, 460V, 1775 RPM with Belts and Guards.

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Lamella Premier

thickener Separator,

1 5

thickener/gravity settler, appears to beS/st, LGST Series 55. Unit consists of (13) plates,airlock measuring Separator, Cyclone, Air, 21 X 48 inch, Rotary Valve, (5) 5) Stainless steelstainless cyclone steel with rotary valve.98 Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com dominic@machineryandequipment.com

Lochead Primary

Assay Crusher

15

Lochead Roll, Haggarty Ovens, door,(2) 5 shelf Crusher, 78 X Drying 60 inch, 2-Roll,2Fam, 350 HP, Primary

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

Marcy Raymond

5’ x 7’

C739838

12

Ball Mill complete with 6058, 125 hp. spare liners Mill, Roller, Raymond, 8' motors, Whizzer,c/w Complete

Dan or Bart Hurley Dominic A. Piazza

705-682-0681 415-467-3400

info@thehurleygroup.com dominic@machineryandequipment.com

Metso Raymond

Mill, Ball

C740223 C739840

12

(2) Mill, Ball, 22' X 38',6058, Metso, 10,000 KW, Unused Mill, Roller, Raymond, Double Whizzer, 1979

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com dominic@machineryandequipment.com

Metso Raymond

SAG MILL

C740224 C739837

1

Mill, Roller, SAG, 36' X 20.5', Metso, 20,000 HP, Unused Raymond, 5448, Complete System

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com dominic@machineryandequipment.com

Mill Raymond

300 TPD

C739841

1

300 TPD Flotation milling plant equipment package, Mill, Roller, Raymond, 3036, Double Whizzer, 1962 located near Rico, Colorado.

Mark Levin Dominic A. Piazza

303.567.4174 415-467-3400

mark.levin@minenv.com dominic@machineryandequipment.com

Moovinator Ribbon

Bag Break mixer

S740518 C740463

14

(4) HAFRibbon Equipment 40 40 Bag300 Break Stations, Moovinator, all stainless steel construction, with Double mixer,Model approximately cubic feet total capacity (275 cubic feet working capacity),complete carbon steel

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com dominic@machineryandequipment.com

N/a Breaker Teledyne Screw Rock

12

Unused 8" dia. X 20' Stainless 7.545 HPdegree articulation, Rock-Tech rockbreaker, 1989 Refurbished Teledyne LP15ARScrew MobileConveyors, Rockbreaker,

BarryAlexander Paccagnan Mark

604-534-5313 705-671-2100

sales@nelsonmachinery.com mark@minesource.com

Nico Rocklab

Apron Crusher

21

48 25inch, Nico10 Apron 4 xx20 h.p. Feeder

BarryDelabbio Paccagnan Fred

604-534-5313 705-560-3705

sales@nelsonmachinery.com info@nelmaco.com

Nordberg Sag Mill

7'Shorthea

1

Nordberg / Symons 7' HD Shorthead Cone Crusher Liner Handler, Mclellan, 4,000 Lb, Hydraulic, Sag Mill

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

Nordberg Sag Mill

7'STD

12

Nordberg / Symons 7' HD Standard ConeR/L Crushers Mill, Sag, 18' X 10-1/2', Fuller, 1500 HP,

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

Nordstrong Schutz O'neil

Conveyor Hammer

S740451

1

10" 6'8" Nordstrong Conveyor Mill,xHammer, 16 inchScrew Dia, Schutz O'Neil, Air Swept, 50 HP, Schutz O'Neil air swept hammer mill with 50 hp,

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

NPK Separator

E224A

40461 C739518

1

RefubishedAir Hydraulic Breaker, Model E224A, Separator, Classifier, Alpine,NPK 6' Dia., Stand Alone10,000 Ft Lb Class,

Steve Archer Dominic A. Piazza

905-673-8200 415-467-3400

Steve.archer@creightonrock.com dominic@machineryandequipment.com

Outotec Separator

SAG Mill 36 X 96

31

Unused 5.5m dia. X 9.15m (18'x30') Outotec SAG(3)Mill, 4500KW Separator, Magnetic, 36 X 96, S/st, Eriez, Drum,

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

Outotec Separator

TC-20 DS15LB,

26

Unused Outotec TC-20, 20m3 Stainless Tank Cells Separator, Hydrocyclone, Krebs, 15, DS15LB, Pod of 4, (2)

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

Overland Silo

Conveyor

C740025

1

1- 543,800 inch CF, x 2,400 overland conveyor, dismantled and ready for transport Silo, C/st,ft 11-1/2' x 36', 125 Tons,

Mark Alexander Dominic A. Piazza

705-671-2100 415-467-3400

mark@minesource.com dominic@machineryandequipment.com

Pennsylvania Silo

Model CA-2 C740026

1

1 – Pennsylvania Reversible Impact System, Crusher,Dust Model CA-2-30. 40HP, 460V, 1775 RPM with Belts and Guards. Silo, 2,000 CF, 1,500 CF, Truckload Collection

Barry Paccagnan Dominic A. Piazza

604-534-5313 415-467-3400

sales@nelsonmachinery.com dominic@machineryandequipment.com

Premier Soosan

Separator, SQ100

S740525 14

15

Separator, Cyclone, 21 X 48 inch, S/st, Rotary Valve, (5)Ft5)Lb Stainless steel2011 cyclone with rotary airlock valve. Refubished HydraulicAir, Breaker, Soosan Model SQ100, 6500 Class, year

Dominic A. Piazza Steve Archer

415-467-3400 905-673-8200

dominic@machineryandequipment.com Steve.archer@creightonrock.com

Primary Soosan

Crusher SQ60

16

1

Crusher, Roll, 78 X 60Breaker, inch, 2-Roll, Fam, (2) 350 HP, 3000 Primary Refubished Hydraulic Soosan Model SQ60, Ft Lb Class, year 2011

Dominic A. Piazza Steve Archer

415-467-3400 905-673-8200

dominic@machineryandequipment.com Steve.archer@creightonrock.com

SQ80

C739838 26

1

Mill, Roller, Raymond, 6058, 8' Soosan Whizzer,Model Complete Refubished Hydraulic Breaker, SQ80, 5000 Ft Lb Class, year 2011

Dominic A. Piazza Steve Archer

415-467-3400 905-673-8200

dominic@machineryandequipment.com Steve.archer@creightonrock.com

MB20

C739840 1202

1

Mill, Roller, Raymond, 6058, Double Whizzer, 1979 Refubished Hydraulic Breaker, Stanley (Soosan) Model MB20 (SB45), 1500 Ft Lb Class,

Dominic A. Piazza Steve Archer

415-467-3400 905-673-8200

dominic@machineryandequipment.com Steve.archer@creightonrock.com

1

Mill, Roller, Raymond, 5448, Complete System Model MB50 (SB81A), 5000 Ft Lb Class, Refubished Hydraulic Breaker, Stanley (Soosan)

Dominic A. Piazza Steve Archer

415-467-3400 905-673-8200

dominic@machineryandequipment.com Steve.archer@creightonrock.com

Raymond Soosan Raymond Stanley Raymond Stanley

S740491 S740525

MB50

C739837 1652

Raymond Stedman

Crusher

C739841 C739845

1

Mill, Roller, Raymond, 3036,48Double Whizzer, 1962 Crusher, Impact, Stedman, X 60, Single Rotor

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com dominic@machineryandequipment.com

Ribbon Tecman

mixer UA1500

C740463 08791

1

Double Ribbon mixer, approximately 300 cubic feet total capacity (275 cubic feet working capacity), carbon steel PEDESTAL BOOM FOR ROCK BREAKER

415-467-3400 705-665-2227

dominic@machineryandequipment.com jkirkbride@tracksandwheels.com

Rock Breaker Hammer Teledyne Teledyne

21

Refurbished Teledyne LP15AR Mobile Rockbreaker, 45 degree articulation, Rock-Tech rockbreaker, 1989 Hydraulic hammer

Dominic A. Piazza Jim Kirkbride

Mark Alexander Dominique Trottier

705-671-2100 819-279-5860

mark@minesource.com jdtrottier@hotmail.com

Rocklab Trommel

Crusher Wash Plant

12

4 xinch 20 inch, h.p. Trommel Wash Plant 36 x 14' 10 Portable

Fred Delabbio Barry Paccagnan

705-560-3705 604-534-5313

info@nelmaco.com sales@nelsonmachinery.com

Liner Handler, Sag Mill Volt Pump, Vacuum,Mclellan, 400 HP,4,000 Nash,Lb, MdlHydraulic, 904P2, 2300/4160

Dominic A. Piazza

415-467-3400

dominic@machineryandequipment.com dominic@machineryandequipment.com

Pump

1

Sag Mill Warman

Slurry

51

Mill, Sag, 18' X 10-1/2', Fuller, HP, R/L 1-1/2 x 1 Warman BAH all steel1500 Slurry Pumps

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Schutz O'neil Warman

Hammer Slurry

S740451

21

Mill, Hammer, 16 inch Dia, Swept, 50 HP, Schutz O'Neil air swept hammer mill with 50 hp, 1-1/2 x 1 inch Warman BAHSchutz all steelO'Neil, SlurryAir Pumps,

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Separator Wemco

120

C739518

1 Wemco Separator, Air Classifier, Alpine, 6' Dia., Stand Alone 25 Model 120 Flotation Mechanisms

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Separator Wemco

36 X 96 190

3 Wemco Separator, Magnetic, 36 X 96, S/st, Eriez, Drum, (3) 24 Model 190 Flotation Mechanisms

Dominic A. Piazza Barry Paccagnan

415-467-3400 604-534-5313

dominic@machineryandequipment.com sales@nelsonmachinery.com

Separator Williams

DS15LB, hog mill

S740430

2 1

Separator, 15,with DS15LB, 4, (2) hammers and 2 rows of 1 swinging hammer, screen Dominic A. Piazza Williams &Hydrocyclone, Pulverizer Co.Krebs, hog mill 2 rowsPod of 2 of swinging

415-467-3400

dominic@machineryandequipment.com dominic@machineryandequipment.com

C740025

1

Silo, 3,800 CF, C/st, 11-1/2' x 36', 125 Tons,

415-467-3400

dominic@machineryandequipment.com

Sag Mill Vacuum

Silo

Dominic A. Piazza


Worthington

1

250hp

Pump, Centrif., 250 HP, C/st, 18 X 20, Worthington

Model Model

S/N # Serial

AME

Cobra

4212

AME

415-467-3400

dominic@machineryandequipment.com

Utility Vehicles

The Mining Equipment Prospector p.33 Make Make

Dominic A. Piazza

Qut. Qut Description Description:

UTILITY VEHICLES

Contact Contact:

Telephone Telephone:

Cobra, III AWD Forklift with man basket, 2005

Randy Size

780-469-5677

rsize@amt-inc.ca

1

COBRA 11, MANCARRIER

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

1

ATLAS COPCO BROK250 MICOSCALER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Trucks

3

1- Teledyne, 1- Tamrock M-60, 1- Getman

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

BTI

Boom truck

1

(1) BTI Hiab Boom

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

TH514c

4

(4) 2014, Quick Attach, Forks, Enclosed Cab, 45 feet reach

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

DUX

boom truck

1

Boom truck with HIAB 071 boom, CAT engine, powershift

Frank Crites

807-221-4670

sales@resequip.com

DUX

DT-15FLP

2

(1) Reconditioned, Dux boom truck, model DT-15FLP

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

DUX

P1

4813

1

DUX P1 Maintenance Truck 1999

Randy Size

780-469-5677

rsize@amt-inc.ca

DUX

S1

4772, 4773,

3

DUX S1 Porter Truck, 1999, 2x 2007

Randy Size

780-469-5677

rsize@amt-inc.ca

DUX

S1-PC20

4568

1

DUX S1-PC20 Personnel Carrier, 2011

Randy Size

780-469-5677

rsize@amt-inc.ca

Eimco

950

1

EIMCO 950 Utility Vehicle

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

950

1

Utility Flatbed, Kubota Diesel

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco

955

3

Utility Flatbeds, two with Deutz F3L912W, one with Deutz F4L912W

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco

975

2

EIMCO 975 PERSONNEL CARRIGE

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

975

3

EIMCO 975 FLAT BED TRUCK

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

975

1

EIMCO 975 LUBE TRUCK

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

975

1

BOOM TRUCK

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Eimco

975

1

Used, Eimco, model 975 utility vehicle

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Eimco

975

1

Fuel and Lube Truck, hose reels, compressor, 8 product tanks, partially refurbished

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco

975

1

EIMCO 975 FLAT DECK,F6L912,clark,ford,6'6"w

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

Lube Truck

1

(1) Eimco U/G Lube truck! 4-oils, 1 fuel compartment

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Eimco

985

1

Water tank truck, Deutz V-6

Mark Levin

303.567.4174

mark.levin@minenv.com

Elmac

D54A

1

Personnel Carrier, 12 passenger

Frank Crites

807-221-4670

sales@resequip.com

Fortis

MB6

5396

3

6' Personnel Basket w/ Fork Pockets

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Fortis

MB8

5397

3

8' Personnel Basket w/ Fork Pockets

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Getman

200

B50-503

1

GETMAN 200 SUPER LOW PROFILE LUBE TRUCK

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

220

1

GETMAN 220 CRANE TRUCK

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

799T

1

GETMAN 799T TRAMMER/UTIL.TRUCK,ISUZU,PARTS MACHINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

3

GETMAN A-64 FLAT BED

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

2

GETMAN A-64 BOOM TRUCK

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

1

GETMAN A-64 MULE

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

A64

1

1 - Getman A64 boom truck, completely rebuilt

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Getman

A64

B50-580

1

GETMAN A-64 LIFT TILT BED TRUCK,F6L912,CLARK,PAINTED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-581

1

GETMAN A64 BOOM TRUCK,DDEC471,090 BOOM,LCB

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-583

1

GETMAN A64 14 MAN CARRIER TRUCK,MERCEDES POWER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-586

1

GETMAN A64 PALLET TILT AND LOAD DECK TRUCK,MERC, PAINTED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-588

1

GETMAN A64 14 MAN CARRIER,MERC,CLARK,PAINTED,CN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-595

1

GETMAN A64NX WATER TRUCK,MERCEDES POWER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-600

1

GETMAN A-64NX, 14 PERSONNEL CARRIER,904 MERC TURBO,6'6"W,PAINTED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

4685, 4686,

3

A64 Personnel Carrier, 2005, 2x 2014 New condition, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

A64

4710

1

Getman A64 Boom Truck , Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

A64

4900

1

Getman A64 Fuel Truck , 2015 like new, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

A64

1

Getman A64 fuel/lube truck

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Getman

A64

1

Getman A64 HIAB071A boomtruck w/new Deutz engine 914, completely rebuilt

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Getman

A64

1

GETMAN A64 LUBE TRUCK, f6l912, funk trans,d45 axles,parts machine

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

1

Agrale 4x4 pick up, Sprint 4.07 TCE 4 cyl inline diesel engine. Dana front and rear axles.

1

COBRA 11 09414

Atlas Copco

BROK250

Boom

Agrale

4x4

B50-509

B50-549

B50-587

B50-526

Sandy Baril

705-566-5030

E-mail e-mail:

info@mar-inc.com


Getman

A64

4685, 4686,

3

A64 Personnel Carrier, 2005, 2x 2014 New condition, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

A64

4710

1

Getman A64 Boom Truck , Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Getman

A64

4900

1

Getman A64 Fuel Truck , 2015 like new, Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

1

Getman A64 HIAB071A boomtruck w/new Deutz engine 914, completely rebuilt

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

The Mining Equipment Prospector p.34 S/N

Utility Vehicles

Make Getman

Model A64

Qut. Description 1 Getman A64 fuel/lube truck

Getman

A64

Getman

A64

B50-526

1

GETMAN A64 LUBE TRUCK, f6l912, funk trans,d45 axles,parts machine

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-614

1

GETMAN A64 TILT AND LOAD PALLET TRUCK,86"W

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

B50-615

1

GETMAN A64 WATER TRUCK,79" WIDE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

A64

5007

1

Palfinger boom, Canopy, MB-904 engine, Clark powertrain, and New seats. Ready to work!!

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Getman

A64

1

Deutz F6L912W, runner, needs refurbished

Mark Levin

303.567.4174

mark.levin@minenv.com

Getman

Boom

1

Getman Boom Truck, Refubished

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Getman

R62

1

GETMAN R-62 BOOM TRUCK

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Getman

R62

1

GETMAN R-62 PIPE TRUCK

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

S-330

1

GETMAN S-330 SCALER 6321,F5L413,CANOPY,129"W

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

S300

1

GETMAN S-300 SCALER

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

S324

1

GETMAN S-324 SCALER, only 750 hours since refurbished

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Getman

S330

1

GETMAN SCALER S330,CAB,F6L912,PAINTED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

S330

1

GETMAN S-330 SCALER

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

TRAMMER

4

GETMAN TRAMMER

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Getman

TRAMMER B50-601

1

GETMAN TRAMMER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Getman

Boom

1

Reconditioned Getman A64 Boom Truck, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Grader

John Deere

1

John Deere 570B Grader, Engine: John Deere 6059, 6 cyl., Direct Drive planetary power shift

Mark Alexander

705-671-2100

mark@minesource.com

Greenlee

6001

YF7602TE

2

6,500 lb, Cable Puller

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Hiab

M60CT

09670

1

BOOM TRUCK

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

1

Ready to Go Scaler Like New – 16 Hours, Cummins QSB3.3 Engine, Dana 20,000 Power Shift Transmission,

Martin Short

705-682-2084

mshort@waldenequipment.ca

2

Jama, Scaler SBU8000, 2008, 2009

Randy Size

780-469-5677

rsize@amt-inc.ca

1

Sellick Telescopic forklift, Underground forklift with enclosed cab, telescopic boom

Mike Castron

705-693-9870

MikeC@cardinalmining.com

B50-620

B50-599

J&S Jama

Scaler

9986, 9982

JCB

Contact Mike Castron

Telephone 705-693-9870

E-mail MikeC@cardinalmining.com

JCI

5 Ton

1

JCI 5 Ton Boom Truck, HIAB 090 Boom, Deck 8' x 10', 6 cyl Deutz, Clark Power Shift Transmission, ROPS

Mark Alexander

705-671-2100

mark@minesource.com

Kubota

5740

1

Man Carrier w/scissorlift

Ghislain Grondin

819-825-6222

ggrondin@em2000.ca

Kubota

K008-3

17929

1

Currently on RENTAL,For sale or rent. A Kubota K008-3 excavator with 12 inch bucket. Mfr 2014

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Kubota

L4310 DT

B50-561

1

KUBOTA TRACTOR L4310 DT

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Kubota

M5030DT

B50-507

1

KUBOTA M5030DT 4X4 TRACTOR

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Kubota

Mine

B50-546

1

KUBOTA MINE MASTER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Kubota

RTV1100

4777

1

Kubota RTV1100 2007 Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Kubota

RTV1140

4802, 4805,

3

Kubota RTV1140 (x3) Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Kubota

RTV1140C 24274 20943

1

Man Carrier 4 person, s/n 24274 20943 21368

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Kubota

RTV900

24255

1

Man Carrier 2 person

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Kubota

RTV900

4778

1

Kubota RTV900 2007 Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Kubota

RTV900C4 53320

1

Man Carrier 2 person

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Kubota

RTV900R

1

2006, KUBOTA, RTV900R UTV SXS

Martin Short

705-682-2084

mshort@waldenequipment.ca

Kubota

R410S

1

Kubota, R410S, Forklift

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Kubota

RTV900

8

Includes turbocharger kit for high altitude operation, low hours, good condition, some have fire supp.

Mark Levin

303.567.4174

mark.levin@minenv.com

M40

Boom

1

M40 Boom Truck, year 2010 only 400 hours since new, side shift, Deutz F6L914L, Hiab 071 boom

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

M60

Boom

2

M60 Boom Trucks, Rebuilt machines, New engines

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

MacLean

BT3

BT3-080

1

Boom Truck, NEW!, Hiab 095 Crane, Merc 906, ROPS/FOPS, MAC-10 Warranty

Dan Stern

705-445-5707 x256 dstern@macleanengineering.com

Maclean

Boom

B50-608

1

MCLEAN BOOM TRUCK

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Man Carrier

Mine

1

Several Mine Master man carriers available for sale

Mark Alexander

705-671-2100

mark@minesource.com

WE357

Marcotte

B50-618

1

MARCOTTE M40 FLAT DECK,F6L912,P/S,FORD D62,8'X13'DECK,104"W Machine

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Marcotte

B50-621

1

MARCOTTE BOOM TRUCK M60,F8L413,FORD,095 HIAB,8'W,RECONDITIONED, NEWBOOM

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Marcotte

B50-626

1

MARCOTTE M20 CARRIER BF4M1012C,ROPS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B40-525

1

MARCOTTE M40 CHIEF CARRIER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Marcotte

M40


Marcotte

B50-618

1

MARCOTTE M40 FLAT DECK,F6L912,P/S,FORD D62,8'X13'DECK,104"W Machine

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Marcotte

B50-621

1

MARCOTTE BOOM TRUCK M60,F8L413,FORD,095 HIAB,8'W,RECONDITIONED, NEWBOOM

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Marcotte

B50-626

1

MARCOTTE M20 CARRIER BF4M1012C,ROPS

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B40-525

1

MARCOTTE M40 CHIEF CARRIER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

1

M40 Boom Truck, Overhauled in 2012, John Deer axles, Detroit 2 stroke. Good condition

Warren Cayen

705-692-2204 x

WCayen@technicagroup.com

Marcotte

M40

Marcotte

M40 Boom

Marplex

B50-563

2

MARPLEX PERSONNEL TRUCK, FORD POWERTRAIN

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Marplex

B50-565

1

MARPLEX FLAT BED TRUCK

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Miller

B50-510

1

JCB/MILLER 4X4 TRACTOR WITH FO

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Miller

B50-574

1

MILLER 8 MAN PERSONAL CARRIER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Miller

Triple

1

(1) Miller Triple Force 4CE! 6 Man Carrier

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Mine Master

TW0131

1

MineMaster Torquematic TW0131, Model: T100-C3L, Serial: 050098 Year: 2006, comes with forks

Mark Alexander

705-671-2100

mark@minesource.com

Minecat

PL 108

1

1- Minecat PL 108 Tractor! 7 Man Carrier, New Iveco Engine

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Minecat

UT99

1

(1) Minecat UT99" Man carrier, Iveco Engine"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Minecat

UT99C

1

2012 Mechanics Truck, Cummins QSB 3.3, Max Load: 2000 lbs, wet disc brakes, Ready to work!!

Mike Castron

705-693-9870

MikeC@cardinalmining.com

1

Reconditioned Mine Cat Service Vehicle., Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

3

2008 Minecat with forks, additional seating for 6 person, ROPS, 2 are ready to go!!

Mike Castron

705-693-9870

MikeC@cardinalmining.com

7228

Minecat Minecat

MC100

6086, 6101

Minejack

Boom

1

(1)Minejack U/G Boom Truck"090 Hiab Boom"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

MTI

LubeTruck

1

(1) 1991 JCI

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Normet

B50-514,

2

NORMET CASSETTE CARRIER (931)deutz,clark,ford,painted

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

B50-578

1

NORMET TRUCK WITH MAN BASKET,F6L912,CLARK,FORD.PAINTED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

B50-611

1

NORMET 6600 tilt and load,Cab,F6L912 turbo,man caarier,emullsion,flat decks,fuel casseette

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Normet

Mechanic

1

Welder, lifting boom, toolboxes, enclosed cab, Deutz F6L912W, needs refurbished

Mark Levin

303.567.4174

mark.levin@minenv.com

Normet

Multimec

1

Deutz F6L912W, runner, needs refurbished. In Elko yard.

Mark Levin

303.567.4174

mark.levin@minenv.com

Normet

6600

4108

1

Normet 6600 Carrier with Flatdeck Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

Himec

9987

1

Normet Himec 9805B, 2001 Ireland

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

Himec

4235

1

Normet Himec 9915BA, 2001

Randy Size

780-469-5677

rsize@amt-inc.ca

Normet

Twinmac

4236

1

Normet Twinmac 9100

Randy Size

780-469-5677

rsize@amt-inc.ca

Oldenburg

SV26

1

(1) Oldenburg SV26 Scaler"900 hours since remanufacture"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Oldenburg

utility trucks

2

2ea Oldenburg utility trucks, cummins engines

Mike Deziel

705-966-2505

dezielrepairsinc@bellnet.ca

Pitbull

MUC1

2

PITBULL MUC1 MAN CARRIER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Pitbull

Man Carrier 3866, 3867

2

Pitbull Man Carrier, Sudbury, ON

Randy Size

780-469-5677

rsize@amt-inc.ca

Scorpion

CT-300

1

(1) Unused, Scorpion personnel carrier/utility vehicle, 2015-2016, model CT-300

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Southbay Sub 0

Man Carrier

Isuzu 6BD1 engine or other, Clark-Hurth FT-12000 powershift 3fwd 3 rev & 171 axles load 19,800 lbs., wet disc

Doug Edmondson

705-682-0687

Doug@southbaydesign.ca

Southbay Sub 0

Man Carrier

Deutz engine or other, Clark-Hurth FT-12000 powershift 3fwd 3 rev & 171 axles load 19,800 lbs., wet disc spring

Doug Edmondson

705-682-0687

Doug@southbaydesign.ca

Isuzu 6BD1 engine, Clark-Hurth FT-12000 powershift trans. 3 fwd. 3 rev. & 171 axles load 19800 lbs., wet disc

Doug Edmondson

705-682-0687

Doug@southbaydesign.ca

1

Mobile Rock Breaker

Jeannot Courchesne

705-857-2154

sales@rdhminingequipment.com

B50-551

4

Southbay Sub 14 Men Teledyne

LP15AR

Teledyne

B50-607

1

TELEDYNE BOOM TRUCK,F6L912,CLARK,ROCKWELL LCB,HIAB 650A,MAX 7720LB LIFT

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Teledyne

B50-616

1

TELEDYNE LUBE FUEL TRUCK,F8L413,CLARK,FORD 65,1 FUEL+2 OIL+GREASER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Toyota

HZJ79

JTELB71J70

1

2013, Landcruiser All-Terrain

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Toyota

HZJ79L-

JTEB71J477

1

2008, Landcruiser All-Terrain

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Toyota

HZJ79L-

JTELB71J88

1

Landcruiser All-Terrain

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Toyota

Land

4

(4) Standard Transmission, Personal Carrier, SHAR brakes

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Toyota

Landcruiser

1

New and used Toyota Landcruisers with mine specs, numerous configurations, man carriers, scissor lifts, Aerial

Steve Dunlop

705-476-4500

sdunlop@millertechnology.com

Toyota

T661H

09538

1

X DECK PU TRUCK

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

Toyota

HZJ79

WE441

1

Toyota 1HZ, 7239.2 hours, 7357.8 hours, Standard 5 speed

Martin Short

705-682-2084

mshort@waldenequipment.ca

United

Cub Cadet

1

(1) 2011 4 Person, power Shift

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Utility

Tractors

1

New and used utility tractors, Triple 4ce, with mine specs

Steve Dunlop

705-476-4500

sdunlop@millertechnology.com

Wagner

UT-45

B50-504

1

WAGNER UT45 FLATBED CARRIER PARTS MACHINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

UT-45

B50-579

1

WAGNER UT-45 OIL/LUBE TRUCK

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

UT-45A

B50-516

1

WAGNER UT45A FLATBED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Wagner

TheUT-45A Mining Equipment Prospector p.35 B50-518 2 WAGNER UT45A


Wallace

1

DUV12 4

WALLACE DUV12-4-418PC PERSONNEL CARRIER

Model Model

S/N # Serial

6 TON Asea

9 TON

Atlas

269-628-5605

Contact Contact:

Telephone Telephone:

pillar@pillarmfg.com

Rail Equipment

The Mining Equipment Prospector p.36 Make Make

Greg Pillar

Qut. Qut Description Description:

RAIL EQUIPMENT

E-mail e-mail:

1

10 TON LOCOMOTIVE

B80-616

1

1981 6 TON HIGA LOCO

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B80-521

1

ASEA 9 TON LOCI

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

3.5 ton

1

(1) Good condition, Atlas 3.5 ton locomotive, 24” gauge

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Atlas

J

1

1 Unit completely refurbished, two others for parts. 18-24 gauge convertible. Rebuilt EVC controller, new battery

Mark Levin

303.567.4174

mark.levin@minenv.com

Atlas

K

1

good condition, no battery box or controller. 24 to 30 inch gauge

Mark Levin

303.567.4174

mark.levin@minenv.com

Atlas

LM250

2

LM-250, 36 inch gauge

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas

LM56

2

Mucker, 24 and 36 gauge

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Atlas

LM56

3

Mucker, 24 x 36 inch track

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Atlas

Mucking

5

4 avilable LM56, 24-30-36 GGE, 1 only LM70, 24-30-36 GGE.

Mark Garofolo

705-693-7900

markg@regmining.com

B15-644

1

ATLAS COPCO MUCKER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

10 TON

Atlas Copco

B80-516

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

310

B15-535

1

ATLAS COPCO 310 MUCKER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

CAVO 310

B15-506

3

ATLAS COPCO CAVO 310

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

LM250

B15-533

2

ATLAS COPCO LM250

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

LM56

B15-502,

5

ATLAS COPCO LM56

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

LM56H

B15-512

1

ATLAS COPCO LM56H

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

LM56HE

B15-507,

2

ATLAS COPCO LM56HE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Balco

20 ton

2

Irwin 20 ton Balco locomotives. Units are in excellent running condition. Just back from rental ( batteries not

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Balco

4-ton

1

24 gauge, Deutz 4 cyl, hydraulic drive. Model DHL-4, Refurbishment in progress

Mark Levin

303.567.4174

mark.levin@minenv.com

Ballast

Side Dump B80-624

1

BALLAST CAR-SIDE DUM

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Battery Loco

5 TON

2

5 TON BATTERY LOCO 2

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Brookville

20 ton

2

(2) Used running, Brookville 20 ton locomotives, model BCD-20-UP’s

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Brookville

25 TON

B80-666

3

BROOKVILLE 25 TON LOCOMOTIVE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Camel

Bottom

B80-629

2

CAMEL BOTTOM DUMP CAR

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Card

Rocker

34 Rocker Dump ore cars, 18 and 24 inch gauge, also flatcars and specialty cars of various kinds

Mark Levin

303.567.4174

mark.levin@minenv.com

Clayton

10 TON

1

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Clayton

2 t o 12 ton

12 Battery Locomotives, 2 to 12 ton

Mark Garofolo

705-693-7900

markg@regmining.com

Clayton

5 TON

1

CLAYTON 5 TON LOCI

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Clayton

10 Ton

1

(1) Clayton 10t Diesel Loci"Deutz F6L-912W, Good condition"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Concrete

MIXER

B80-637

2

RAIL CONCRETE MIXER N/A

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B15-514

1

EIMCO ROCKER SHOVEL

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

B80-645

B80-615 B80-509

CLAYTON 10 TON LOCO

Eimco

12B

3

Several units available, refurbished, runners and cores. 18/24 gauge

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco

21

1

24 ga

Mark Levin

303.567.4174

mark.levin@minenv.com

Eimco

21

B15-517

3

EIMCO 21,24" GUAGE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

21

B15-520

4

EIMCO 21,30" GUAGE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

21

B15-529

1

EIMCO 21

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

21B

3

(3) Reconditioned, Eimco, overshot rail muckers, 24” gauge, model 21B’s

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Eimco

22

B15-537

4

EIMCO 22 AIR MUCKER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

24

B15-521

1

EIMCO 24

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

24B

1

(1) Eimco, model 24B, overshot rail muckers, 24 gauge, Good runners

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Eimco

24B

B15-524

1

EIMCO 24B

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

25

B15-643

1

EIMCO 25 MUCKER. 36" G, AQ-5413

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

621

B15-518

1

EIMCO 621

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

622

B15-510

2

EIMCO 622 CRAWLER MUCKER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Eimco

LM70

1

(1) Eimco, overshot rail mucker, 36” gauge, model LM-70

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Eimco

Mucking

11 Mucking Machines, 5 Available Eimco 21, 2 Available Eimco 22, 2 Available Eimco 24, 2 Available Eimco 12B,

Mark Garofolo

705-693-7900

markg@regmining.com

Electric

7 TON

1

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

B80-649

7 TON ELECTRIC LOC13 1414


Eimco

LM70

1

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Eimco

Mucking

11 Mucking Machines, 5 Available Eimco 21, 2 Available Eimco 22, 2 Available Eimco 24, 2 Available Eimco 12B,

Mark Garofolo

705-693-7900

markg@regmining.com

Electric

7 TON

1

7 TON ELECTRIC LOC13 1414

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Elgood Mayo

Mantrip

1

24 passenger, Deutz F6l912W, 36 gauge 6 cylinder 72 HP

Andy Pavlisick

970-872-3894

highc@paonia.com

8

Flat Cars , 48 x 58 inches, 24 gauge, 2 sizes

Frank Crites

807-221-4670

sales@resequip.com

B80-649

Flat Cars

(1) Eimco, overshot rail mucker, 36” gauge, model LM-70

Gia

B80-520

1

GIA DIESELLOK DHS # 306

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Goodman

B80-549

3

GOODMAN LOCOMOTIVE 24" GAUGE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Goodman

11 TON

B80-541

4

GOODMAN CBL-11TON,36",80V,75HP

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Goodman

15 TON

B80-515

1

GOODMAN 15 TON LOCI

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Goodman

15/20 TON

B80-665

1

GOODMAN 15/20 TON DI

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Goodman

8 ton

1

(1) Reconditioned, 8 ton Goodman locomotive, with spare parts machine

Blaze Julum

(208) 661-7510

Blazejulum55@gmail.com

Goodman

8 TON

B80-540

1

GOODMAN 8T BATTERY LOCI 36"

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Goodman

8 TON

B80-548

1

GOODMAN 8 TON BATTERY,36"GUAGE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Granby

4 TON

B80-607

6

GRANBY 4 TON ORE CAR

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Greensberg

4 TON

B80-511

2

GREENSBERG 4 TON LOCI

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Haglun

rail cars

3

rail cars

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Mancha

0.5 Ton

4

Battery locomotive, 24 ,30 or 36 inch track

Dan or Bart Hurley

705-682-0681

info@thehurleygroup.com

Mancha

1.5

1

Refurbished, complete with solid state controller, 40 Volt, 300 AH charger, 18-24 ga convertible

Mark Levin

303.567.4174

mark.levin@minenv.com

Mancha

1.5

1

Runner, cleaned and painted, needs battery box

Mark Levin

303.567.4174

mark.levin@minenv.com

Mancha /

Titan BN

1

24 gauge, excellent condition

Mark Levin

303.567.4174

mark.levin@minenv.com

Moran

B80-539

2

MORAN CAR AGITATOR,900 mm guage

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Muhlhauser

B80-605

2

MUHLHAUSER TUBE HANDLER,900mm guage,diesel

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Muhlhauser

remixer

B80-529

5

MUHLHAUSER KBM-5,900mm guage,remixer

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Muhlhauser

remixer

B80-533

3

MULHAUSER KBM-7,900mm guage,remixer

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Muhlhauser

remixer

B80-586

2

MUHLHAUSER REMIXER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Muhlhauser

side dump

B80-653

12 KARL-H MUHLHAUSER muck car side dump 24"gauge,5-6 yd

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Ore Cars

1.2504

8

Ore Cars Rocker Dumper, 24 gauge

Frank Crites

807-221-4670

sales@resequip.com

3

2 - 25 ton diesel locomotive, Cat engine 36-42 GGE, 1 - 20 ton diesel locomotive, Cat engine 36-42 GGE

Mark Garofolo

705-693-7900

markg@regmining.com

Plymouth

20 & 25 ton

Plymouth

8 TON

B80-596

1

PLYMOUTH 8 TON DIESEL LOCO

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Rail

BENDER

B80-614

1

HYDRAULIC RAIL BENDER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

4436

13 LOT Rail Cars x 13 Colorado

Randy Size

780-469-5677

rsize@amt-inc.ca

Rail Cars Rail Cars

10 ton

10 Rail cars

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

REG

EZM 4.5

1

EZM 4.5 ton, Diesel Loco, featuring a removable upper body for easy access to the powertrain and brakes,

Mark Garofolo

705-693-7900

markg@regmining.com

Rotating

Small Deck B80-651

2

ROTATING SMALL DECK

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Sandvik

630

1

(1) Eimco 630

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Schoma

23 ton

2

2 - 23 ton loco, 36 gauge

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Schoma

8 TON

4

2- Schoma 8t Diesel Loci 24 gauge

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Schöma Cfl

CFL-180

ID1035

1

2 units - Diesel-hydraulic Locomotive, Deutz engine F8L413FW (136 kW),Gauge 750 mm, Smallest curve radius

Bosch Baumaschinen

0049/991/99899543

Bosch-Baumaschinen@t-online.de

SIG

ETB70

B80-600

5

SIG ETB70 BATTERY LOCOMOTIVE,900mm guage

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Telluride

Side Dump B80-619

1

TELLURIDE CAR-SIDE D

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Titan

4 ton

1

Titan 4 ton Battery Locomotive, available in 24 to 36 inch gauge, 55 controls

Mark Garofolo

705-693-7900

markg@regmining.com

Contact Contact:

Telephone Telephone:

E-mail e-mail:

Miscellaneous = Tunnelling - Pumps - Scalers - Shaft Equipment

The Mining Equipment Prospector p.37 Make Make

Model Model

S/N# Serial

Qut. Description Qut Description:

MISCELLANEOUS = TUNNELLING - PUMPS - SCALERS - SHAFT EQUIPMENT

1

Allis Chalmers 14x12x36 SRL-XT Pumps

H-110

1

Low hours, diesel drive, electric tunnelling, been stored indoors whilst decommissioned,all parts working, comes

Frankie Warren

01604 880621

frankie.warren@mawsley.com

Antraquip

AQ-3

1

roadheader type cutter head attachment for backhoe or excavator

Mark Levin

303.567.4174

mark.levin@minenv.com

Atco

8ft x 28ft

1

Mobile Office Trailer , Air Condition and base board heat, Excellent condition

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Atlas Copco

10HR

1

Low Hour Atlas Copco Hagglund 10HR, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Atlas Copco

8HR

1

Reconditioned Atlas Copco Hagglund 8HR, Standard equipped

Mark Allen

705-929-9608

mallen@vianet.ca

Bean / Fmc

Triplex 20

8

Various power - electric, diesel, pneumatic, and bare

Mark Levin

303.567.4174

mark.levin@minenv.com

Allis Chalmers

Pumps

Alpine

M828112

Mark Alexander

705-671-2100

mark@minesource.com


1

roadheader type cutter head attachment for backhoe or excavator

Mark Levin

303.567.4174

mark.levin@minenv.com

1

Mobile Office Trailer , Air Condition and base board heat, Excellent condition

Mike Castron

705-693-9870

MikeC@cardinalmining.com

1

Low Hour Atlas Copco Hagglund 10HR, Standard equipped

Contact Mark Allen

705-929-9608

Telephone 705-929-9608

mallen@vianet.ca

Triplex 20

8

Various power - electric, diesel, pneumatic, and bare

Mark Levin

303.567.4174

mark.levin@minenv.com

Bean / Fmc

Triplex 35

8

Various power - electric, diesel, pneumatic, and bare

Mark Levin

303.567.4174

mark.levin@minenv.com

Bobcat

S770

1

(1) Enclosed Cab, A/C, Quick attach, 2,450 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Bobcat

S850

3

(3)2012 Skidsteer "Quick attach, Erops, 3,800 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Boderson

IC-80

1

(1) 4 wheel drive and steer, 46' height, 9 ton, 1,600 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Brain

60 inch

1

Dewatering system complete

Andy Pavlisick

970-872-3894

highc@paonia.com

Bredel

Pumps

14 Bredel Peristaltic Pumps, (8) 1 inch SPX25, (6) 2 inch SPX50

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

BTI

BXR85

181

1

NEW Hydraulic Breaker, BTI Model BXR85, 8500 Ft Lb Class, year 2016,

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

B240-515

1

CAT 120G GRADER low profile ,runner

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

4192

1

Caterpillar 120G Grader, 1981, Spokane

Dave Erwin

780-469-5677

derwin@amt-inc.ca

Antraquip

AQ-3

Atco

8ft x 28ft

Atlas Copco

10HR

Bean / Fmc

M828112

The Mining Equipment Prospector p.38

Make Atlas Copco

Model 8HR

CAT

S/N

Miscellaneous = Tunnelling - Pumps - Scalers - Shaft Equipment Mark Allen

Qut. Description Atlas Copco Hagglund 8HR, Standard equipped 1 Reconditioned

E-mail mallen@vianet.ca

CAT

120G

CAT

120G

1

(1) Cat 120G U/G Grader, OROPS, Low profile

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

135H

1

(1) Cat 135H (2008 model)"U/G approved"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

300 KW

1

300 KW Generator, item # 12785

Merle Hoover

570-966-7312

info@ewdrilling.com

CAT

420E

1

(1) Cat 420E IT U/G approved OROPS

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

420E

1

(1) Cat 420E IT Surface, 500 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

966G

1

(1) Cat 966G, Quick attach, bucket/forks

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

D6T

1

(1) Cat D6T LGP", S&T", 6,800 hours

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

IT14G

1

(1) Enclosed Cab, A/C, Forks

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

IT28F

1

(1)1994,Quick attach, Forks

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

IT28G

1

(1)Enclosed Cab, A/C, Forks, Bucket

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

CAT

IT28G

1

CAT IT28G Integrated Tool Carrier, 2004, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

IT420E

1

(1) Quick attach, enclosed cab

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

10 10- New! 20’ Containers!! New

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

4045

Containers Cryderman

buckets

3

3 Sinking buchets

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Cryderman

Clam

1

Cryderman Sinking clam

Dominique Trottier

819-279-5860

jdtrottier@hotmail.com

Cryderman

shaft

1

shaft mucker, complete with spare parts (2 jaws, swing, 3 sections of tower,1 spare boom)

Mark Garofolo

705-693-7900

markg@regmining.com

Darda

0312E

2

3 HP Rock Splitter, Size 12 c/w Electric Power Unit, 220/110

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Dosco

LH1300

1

Dosco LH1300 Road Header

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

Drumcutter

ER-1500X

142522

2

Drumcutter, Model ER-1500X-3 - No Mount, s/n 142593, 142522, year 2014

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

Drumcutter

ER-250-4

1212964

2

NEW Drumcutter, Model ER-250-4, s/n 1212964, year 2015

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

Electrical

Step Up -

1

Skidmounted, enclosed, mine power step up unit, 480V/13.8KV, with zig zag NGR

Mark Levin

303.567.4174

mark.levin@minenv.com

Flygt

3231/665

1

Flygt Submersible Pump 110Hp

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Flygt

pumps

Rebuilt pumps, 13 hp, 19 hp., 30 hp.

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

Flygt

pumps

3

3-New 58 HP Flygt pumps"High Head, new and unused 2014 models

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Flygt Pumps

2102

3

8.1 HP, high head impellors

Mark Levin

303.567.4174

mark.levin@minenv.com

Flygt Pumps

2151

2

30 HP, Rebuilt, high volume impellors

Mark Levin

303.567.4174

mark.levin@minenv.com

FMC

Belt Drive

1

3 x 400HP ABB Motors Technisys 480 Volt drives, Faulk Gear reducers, complete unit

Andy Pavlisick

970-872-3894

highc@paonia.com

FMC

Belt

1

5,000 ft 60 inch Catenary Belt Stucture

Andy Pavlisick

970-872-3894

highc@paonia.com

GE

150 KVA

1

UG Mine power centers - need refurbished - cores for transformer and skid, need all new breakers and

Mark Levin

303.567.4174

mark.levin@minenv.com

GE

300 KVA

5

UG Mine power centers - need refurbished - cores for transformer and skid, need all new breakers and

Mark Levin

303.567.4174

mark.levin@minenv.com

Getman

S324N

1

GETMAN S-324-N-4WD SCALER

Scott Pillar

269-628-5605

pillar@pillarmfg.com

Go Track

GT2000

1

Go Track GT2000, Cummins 6BT 5.9

Mark Allen

705-929-9608

mallen@vianet.ca

Grove

4625

B40-501

1

GROVE 4625 MANLIFT 25'lift

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Grove

AMZ 66'

B40-502

1

GROVE AMZ 66' MANLIFT 2X4

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

IBS

AS-1

1

roadheader type cutter head attachment for backhoe or excavator

Mark Levin

303.567.4174

mark.levin@minenv.com

Intermountain 100 PC

1

UG Mine power center, 13.2KV/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Intermountain 1000 PC

1

UG Mine Power center, 13.8kv/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

356012

665


Go Track

GT2000

1

Go Track GT2000, Cummins 6BT 5.9

Mark Allen

705-929-9608

mallen@vianet.ca

Grove

4625

B40-501

1

GROVE 4625 MANLIFT 25'lift

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Grove

AMZ 66'

B40-502

1

GROVE AMZ 66' MANLIFT 2X4

Kevin McDowell

Contact Mark Levin

705-566-8190

Telephone 303.567.4174

kevin_m@bmcdowell.com

Intermountain 100 PC

1

UG Mine power center, 13.2KV/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Intermountain 1000 PC

1

UG Mine Power center, 13.8kv/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Intermountain 225PC

2

UG Mine power center, 13.2KV/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Intermountain 300 PC

1

UG Mine power center, 13.2KV/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Intermountain 500 PC

2

UG Mine power center, 13.2KV/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

JCB

Fork Lift

1

(1) JCB Telescoping Forklift! 6000LB capacity, EROPS

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Jd Neuhaus

16TI

P901138

1

16t Air Chain Hoist with Motorized Trolley and Chain Bucket

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Jeamar

Sheave

WE313

8

4- 24 inch Sheave, 2- 52 inch Sheave, 3- 48 inch Sheave

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Jlg

Manlift

1

(1) JLG Manlift E450 Electric, 40' lift

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

2

JOHN DEERE 570B GRADER

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

The Mining Equipment Prospector p.39

Make IBS

Model AS-1

John Deere

S/N

Miscellaneous = Tunnelling - Pumps - Scalers - Shaft Equipment

Qut. 1 Description roadheader type cutter head attachment for backhoe or excavator

B240-501

E-mail mark.levin@minenv.com

John Deere

JD 5425

1

(1) U/G APPROVED Grader

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

John Deere

MAN

1

(1) John Deere Tractors"7 man Carrier, u/g equipped"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Line Power

500 PC

2

UG Mine Power centers, 13.8kV/480V and 4160/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Line Power

Disconnect

1

Skidmounted 4160V disconnect, with ground monitoring on output

Mark Levin

303.567.4174

mark.levin@minenv.com

Line Power

Transforme

5

Delta Wye Dry Type Mine Transformers, 300 KVA and 225 KVA, 4160/480 volt.

Mark Levin

303.567.4174

mark.levin@minenv.com

Long Airdox

T17

1

LONG-AIRDOX T-17 FEEDER BREAKER

Greg Pillar

269-628-5605

pillar@pillarmfg.com

M&P

2X3

2

2- Mather & Putt dewatering pumps

Frank Crites

807-221-4670

sales@resequip.com

Manac

trailer

2

2- Manac 53' Van Trailers Good condition

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Metalec

3 phase

1

Transformer 3 phase dry type

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Mine Paging

various

Mark Levin

303.567.4174

mark.levin@minenv.com

National

1800 series

10-10123.1A

100 12 volt, some coal mine permissible, Gaitronics, Femco, and other brands 1

(1) National c/w Volvo twin steer"National 40 T crane, Low Hours"

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Omega Forlift MPI

1

(1) 2012 4x4 Steer and drive, 6000 lbs Cap, 100 inch,

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Paco

Pump

1

New 100H.P. 2,000 gpm, 100' head, all Stainless

Fred Delabbio

705-560-3705

info@nelmaco.com

Pemco

VSH-1

1

Skidmounted Vacuum Switch house, with Toshiba Vacuum breaker, ground monitoring, 24.9KV max rating

Mark Levin

303.567.4174

mark.levin@minenv.com

Pengo

Clean Out

2

Pengo, Clean Out Bucket 68 inch, s/n 1001604, 2016, New,

Steve Archer

905-673-8200

Steve.archer@creightonrock.com

Pettibone

Crane

1

Pettibone Crane, Model 25, Multikrane, 25000 lbs @ 10' radius cap. 360 rotation, 4WD

Barry Paccagnan

604-534-5313

sales@nelsonmachinery.com

Pumps

All

Large stock of available, all makes, sizes, from 50 gpm to 7,718 gpm....

Mark Garofolo

705-693-7900

markg@regmining.com

07.2.A.3104

Rock Breaker Teledyne

1

Refurbished Teledyne LP15AR Mobile Rockbreaker, 45 degree articulation, Rock-Tech rockbreaker, 1989

Mark Alexander

705-671-2100

mark@minesource.com

Sandvik

MH620

1

2005 Sandvik MH620 AHM105 Alpine Miner

Tony Newnham

+ 61 (0)8 9201

gesad4@g-es.net

Silpak

K-300

1

UG Mine power center, 7200V/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Silpak

K500

2

UG Mine Power centers, 13.8kv/480V and 4160/480V

Mark Levin

303.567.4174

mark.levin@minenv.com

Tamrock

grader

1

1- Tamrock Low proďŹ le road grader Deutz power

Vanessa Young

(435)587-2292

youngsmachine@frontiernet.net

Teleledyne

TMTL-120

1

FORKLIFT

Jim Kirkbride

705-665-2227

jkirkbride@tracksandwheels.com

Terex

TXL 400-2

1

(1)Terex DXL 400-2 Loader new 26.5 tires, quick attach

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

Thern

4HPF2M

2

2,100 lb. 575/3/60 Electric Power, Plumb Bob Winch

Paul Cranford

306.242.4427

pcranford@fortiscorporation.com

Tsurmi

LH675-60

2

Rebuilt 100 Hp. 575v, 2 pumps available

Rob Koch

306-244-4384

robcolletteindustrial@sasktel.net

Versa-matic

Pumps

4

Versa-Matic 1.5/2 / 3 inch pumps in stock, Best pricing

Frank Crites

807-221-4670

sales@resequip.com

Volvo

MC110C

1

2012, Volvo MC110C only 313 hours

Mark Allen

705-929-9608

mallen@vianet.ca

Wacker

Pumps

5

ďŹ ve (5) x Wacker Neuson 5 h.p. submersible pumps, new in boxes. 220 volt, 3 phase, 115 max. head

Bill Green

520-805-0739

desertdiesel@gmail.com

Wilden Pump

M-4

7

Pneumatic, 125 psi

Mark Levin

303.567.4174

mark.levin@minenv.com

Wilden Pump

M-8

9

Pneumatic, 125 psi

Mark Levin

303.567.4174

mark.levin@minenv.com

3

48 inch 1/4 Moon Electrical sheaves

Hugh Munro

705-682-2084

hmunro@waldenequipment.ca

Wintech

09602 4012-67889,

MEP SALES LEADS, AVAILABLE TO PAID MEMBERS DAILY VIA E-MAIL

Remember

It won't SELL if nobody knows you have it!

Send us your equipment list Today! Tel: (705) 560-5519, e-mail: list@MiningEquipment.net


Parts & Components

The Mining Equipment Prospector p.40 Make

Model

Atlas Copco

Condition

Description

NEW

PARTS & COMPONENTS

Contact

Telephone

E-mail

ATLAS COPCO PARTS IN STOCK

Greg Pillar

269-628-5605

pillar@pillarmfg.com

1

Atlas Copco 1032 HD, reconditioned

Randy Size

780-469-5677

rsize@amt-inc.ca

1

drills rebuilt by OEM and ready to work.

Frank Crites

807-221-4670

sales@resequip.com

1838

2

Atlas Copco 1838 ME Drill Edmonton

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

Buckets

6

Atlas Copco std. used buckets, ST2G, ST3.5, ST6C, ST1030, ST1030 Ejector and ST1520

Randy Size

780-469-5677

rsize@amt-inc.ca

Atlas Copco

BUT 35

1

Atlas Copco BUT 35 rock drill head assy

Randy Size

780-469-5677

rsize@amt-inc.ca

ATLAS

Drifters

numerous models available, NEW rebuilts or various conditions

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Atlas Copco

drifters

3

(3) 1238, 2- 1532 Drifters

Tim McDowell

1-602-885-6560

tim@mcdowellequipment.com

ATLAS

ST1000

1

COPCO ST1000, DDEC,Clark, DL10P0201 PARTS CRUSHED

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

BCI

Carrier

1

numerous parts in stock

Frank Crites

807-221-4670

sales@resequip.com

BOART

Drifters

numerous models available, NEW rebuilts or various conditions

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Boart

HD150

4

4 available Boart model HD150 drifters

Gervais Gagnon

450-467-2277

mineteq@videotron.ca

cable

reels

11 cable reels (empty) 3 @ 40 w x 60 d, 2 @ 43w x 71 d, 2 @ 42 w x 65 d, 3 @42 w x 60 d, 1 @ 32 w x 47

CANNON

Drifters

Atlas Copco

1032

Atlas Copco

1132

Atlas Copco

Rebuilt

Canun

Sandy Baril

705-566-5030

info@mar-inc.com

numerous models available, NEW rebuilts or various conditions

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

Canun J/L Drill and Stoper parts in stock

Frank Crites

807-221-4670

sales@resequip.com

CAT

120G

3

CAT 120G GRADER parts

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

AD30

1

AD30 box, Austarlia

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

AD30

1

Cengine, drive shafts, radiator, Rims, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

AD45

AD45 Parts: engine, front and rear axles, transmission, new gear group, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

M120

1

1975 CATERPILLAR M-120 GRADER EDMONTON

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1300

1

CAT R1300 LHD 6QW00946, ARERT 6.6T3, OROPS,PARTS MACHINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1300

3

R1300 NEW standard Bucket 4.4 cyd., 1- ejector used 2.5m3/3.1cyd. R1300 used

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1300G

R1300G Engine, Hydraulic tank, cab, radiator, frt and rear axles, transmission torque many other parts

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1600G

1

CAT R1600G, 2007, 9PP00225, PARTS MACHINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1600G

NEW

2

1 New bucket lip, 1 used core, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1600G

NEW

R1600G - New CAB open ROPS, Front axles, torque convertors, and 1- used axle, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1600G

NEW

2

R1600G Ejector Buckets - 1 new, 1 used; 1 standard, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1600G

1

Caterpillar R1600G (Parts) Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1700G

1

R1700G, 2005, 8XZ003810, EROPS,PARTS,CN,NO AXLE SHAFTS PARTS MACHINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R1700G

NEW

R1700G NEW Parts: window, pump, control, windows, turbo charger, tranny, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1700G

NEW

4

R1700 NEW Standard Bucket 5.7m3 / 7.5 cyd, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R1700II

1

CAT R1700II LHD, LCB,3176B CAT,CAB,1996, SPLIT IN CENTER PARTS MACHINE

Kevin McDowell

705-566-8190

kevin_m@bmcdowell.com

CAT

R2900

3

R2900 Rebuilt Bucket 8.9m3 / 11.6y cyd, 1 New- 10.9 yd3, 1 used 11.6 yd3 Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

CAT

R2900

Rebuilt

1

Caterpillar R2900G Front Frame rebuilt, Edmonton

Dave Erwin

780-469-5677

derwin@amt-inc.ca

Cavotec

R-1000

NEW

1

NEW radio remote in stock

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Cavotec

Transmitter

NEW

1

Brand New Cavotec Transmitter/Receiver for underground LHD application.

Eric Duguay

705-693-9870

EricD@cardinalmining.com

Clark

NEW

NEW

Transmission And Torque Converter. Parts In Stock

Greg Pillar

269-628-5605

pillar@pillarmfg.com

Clark

12D Axles

NEW 8

Spares for MTI/JCI 100M/125M

Mark Levin

303.567.4174

mark.levin@minenv.com

Clark

21D3960

4

Clark 21D3960 ST8B axles w/SAHR

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Clark

5400 series

2

Transmission cores, as is or rebuilt

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Clark

8600 series

2

Torque Converter

Mike Castron

705-693-9870

MikeC@cardinalmining.com

Clark Hurth

cores rebuilt & new

Clark Hurth all models, transmissions R28000 HR 28000; R32000 HR 32000; R18000 HR18000.

Pierre Paquette

705-560-3700

ppaq@bullind.com

Clark Hurth

rebuilt & new

Clark Hurth all models, transmission 3420, 4420, 5420, 5800, 8420 and 8820 Series.

Pierre Paquette

705-560-3700

ppaq@bullind.com


DDECHurth Clark

60 series

Detroit Clark Hurth

DDEC

rebuilt & new

1

DDECHurth 60 series factorytransmission reman engine, 12.74420, L, 350 HP 5800, 8420 and 8820 Series. Clark all models, 3420, 5420,

Frank Paquette Crites Pierre

807-221-4670 705-560-3700

sales@resequip.com ppaq@bullind.com

rebuilt & new

2

DDECHurth 60 series Tier 2,converters Running Core Clark all models, C270, C2000, C5000 and C8000.

Mike Castron Pierre Paquette

705-693-9870 705-560-3700

MikeC@cardinalmining.com ppaq@bullind.com

Description 1 x New Deutz model TCD914L06 Clark Hurth all models, Differentials:engine CD5, CD10, CD20, CD30, CD40, CD70.

Greg Pillar Pierre Paquette

269-628-5605 705-560-3700

pillar@pillarmfg.com ppaq@bullind.com

1

The Mining Equipment Prospector p.41 Deutz NEW

Clark Hurth

NEW

Condition NEW Rebuilt&new

Parts & Components PARTS FOR 912W, 714, 413W, ENGINES - ALSO HAVE GOOD CORES Clark Hurth all812, models, OEM Clark repair parts for all Clark powertrain.

Make DeutzHurth Clark

Model TCD914L06

Contact Bill Green Pierre Paquette

Telephone 520-805-0739 705-560-3700

DeutzHurth Clark

BF6L914C

Rebuilt

1

Deutz BF6L914C, cyl. Engine all models, rebuild 6complete axles with OEM parts at competitive pricing.

RandyPaquette Size Pierre

780-469-5677 705-560-3700

E-mail desertdiesel@gmail.com ppaq@bullind.com rsize@amt-inc.ca ppaq@bullind.com

DeutzHurth Clark

BF6M1013E 172...

Rebuilt NEW

1

1 x Rebuilt BF6M1013E Axle series Deutz 172, 171, 271, 272 engine

Bill Green Doug Edmondson

520-805-0739 705-682-0687

desertdiesel@gmail.com Doug@southbaydesign.ca

EimcoHurth Clark

HR12000

NEW NEW

EIMCO DANA

123

NEW

EIMCO DANA

EIMCO PARTST12000 IN STOCK Transmission,

Greg Pillar Doug Edmondson

269-628-5605 705-682-0687

pillar@pillarmfg.com Doug@southbaydesign.ca

4

EIMCO,4 STEEL WHEELS 84 inch axle, fail safe wet disc brakes

KevinEdmondson McDowell Doug

705-566-8190 705-682-0687

kevin_m@bmcdowell.com Doug@southbaydesign.ca

913 axles 19D

1 2

EIMCO 913, MPS, 3304,PARTS Set of 19D axles forCAT ST1030 LHD, partMACHINE # 19D2748 DANA Axles only 1,400 hours, comes with 2 rebuilt

KevinCastron McDowell Mike

705-566-8190 705-693-9870

kevin_m@bmcdowell.com MikeC@cardinalmining.com

EIMCO DANA

922 HR 20000

NEW

1

EIMCOshift 922tranmissions SCOOP,F6L912,18000, PARTS MACHINE power

KevinEdmondson McDowell Doug

705-566-8190 705-682-0687

kevin_m@bmcdowell.com Doug@southbaydesign.ca

EJC DDEC

130series 60

NEW

1

Quick disconnect attachment bucket12.7 andL,forks DDEC 60 series factory remankit, engine, 350 HP

Doug Edmondson Frank Crites

705-682-0687 807-221-4670

Doug@southbaydesign.ca sales@resequip.com

EJC Detroit

430 BOX DDEC

22

1- Spare Injector 1- Spare HT Regular Box DDEC 60 HT series Tier Box, 2, Running Core

JoelleCastron Garside Mike

705-855-4254 705-693-9870

joelle.garside@tesinc.ca MikeC@cardinalmining.com

NEW NEW

ELMACFOR PARTS STOCK PARTS 812,IN912W, 714, 413W, ENGINES - ALSO HAVE GOOD CORES

Scott Pillar Pillar Greg

269-628-5605 269-628-5605

pillar@pillarmfg.com pillar@pillarmfg.com

new & used NEW

1

rebuiltDeutz parts for Joy, TCD914L06 Howden, Woods, HVT ... 1and x New model engine

DanGreen or Bart Hurley Bill

705-682-0681 520-805-0739

info@thehurleygroup.com desertdiesel@gmail.com

ELMAC Deutz Fan parts Deutz

all TCD914L06

Flyght Deutz

pumps BF6L914C

Rebuilt

11

assorted Flyght pumps Deutz BF6L914C, 6 cyl.rebuilt Engine

Rob Koch Randy Size

306-244-4384 780-469-5677

robcolletteindustrial@sasktel.net rsize@amt-inc.ca

FORD Deutz

D45,D62,D66 BF6M1013E

NEW Rebuilt

1

PARTS IN STOCK 1AXLE x Rebuilt Deutz BF6M1013E engine

Greg Pillar Bill Green

269-628-5605 520-805-0739

pillar@pillarmfg.com desertdiesel@gmail.com

GARDNER DENVER PARTS IN STOCK EIMCO PARTS IN STOCK

Scott Pillar Pillar Greg

269-628-5605 269-628-5605

pillar@pillarmfg.com pillar@pillarmfg.com

4

numerousSTEEL modelsWHEELS available, NEW rebuilts or various conditions EIMCO,4

Kevin McDowell McDowell Kevin

705-566-8190 705-566-8190

kevin_m@bmcdowell.com kevin_m@bmcdowell.com

NEW NEW

Gardner Denver Eimco GARDNER EIMCO

Drifters

Getman EIMCO

913

NEW

1

GETMAN PARTS STOCK EIMCO 913, MPS, IN CAT 3304,PARTS MACHINE

Greg Pillar Kevin McDowell

269-628-5605 705-566-8190

pillar@pillarmfg.com kevin_m@bmcdowell.com

Goodyear EIMCO

26.5 x 25 922

cores

18

Tires 26.5 25 EIMCO 922x SCOOP,F6L912,18000, PARTS MACHINE

Mike Castron Kevin McDowell

705-693-9870 705-566-8190

MikeC@cardinalmining.com kevin_m@bmcdowell.com

GRIZZELY EJC

130

NEW

1

GRIZZELY SCREEN BARS kit, bucket and forks Quick disconnect attachment

KevinEdmondson McDowell Doug

705-566-8190 705-682-0687

kevin_m@bmcdowell.com Doug@southbaydesign.ca

21

numerous models available, NEW HT rebuilts or various 1Spare HT Injector Box, 1- Spare Regular Box conditions

Kevin Garside McDowell Joelle

705-566-8190 705-855-4254

kevin_m@bmcdowell.com joelle.garside@tesinc.ca

Jacklegs EJC

430 BOX

Jarvis Clark ELMAC

JARVIS PARTS CLARK IN PARTS IN STOCK ELMAC STOCK

Greg Pillar Pillar Scott

269-628-5605 269-628-5605

pillar@pillarmfg.com pillar@pillarmfg.com

Jarvis Clark Fan parts

MJM 20B all

NEW NEW new & used

1

and rebuiltout, parts for Joy, Howden, Woods, HVT ... Parting MJM-20B - numerous parts available

MarkorLevin Dan Bart Hurley

303.567.4174 705-682-0681

mark.levin@minenv.com info@thehurleygroup.com

JCI Flyght

125M pumps

Rebuilt

12

for sale standard and ejector assorted Flyght pumps rebuiltbuckets for 125M JCI

Bill Green Rob Koch

520-805-0739 306-244-4384

desertdiesel@gmail.com robcolletteindustrial@sasktel.net

JCI FORD

125 D45,D62,D66

NEW

4

!Reconditioned, AXLE PARTS INJCI-125M STOCK buckets

BlazePillar Julum Greg

(208) 661-7510 269-628-5605

Blazejulum55@gmail.com pillar@pillarmfg.com

Gardner Denver JCI

125M

NEW

1

Unused, JCI-125M boom assembly GARDNER DENVER PARTS IN STOCK

BlazePillar Julum Scott

(208) 661-7510 269-628-5605

Blazejulum55@gmail.com pillar@pillarmfg.com

GARDNER JCI

600M Drifters

1

JCI 600M,models CAT 3306,LCB, ROCKWELL PARTS MACHINE numerous available,CN, NEW rebuilts or 5225 various conditions

Kevin McDowell McDowell Kevin

705-566-8190 705-566-8190

kevin_m@bmcdowell.com kevin_m@bmcdowell.com

NEW NEW

AXLE-PARTS IN STOCK GETMAN PARTS IN STOCK

Greg Pillar Pillar Greg

269-628-5605 269-628-5605

pillar@pillarmfg.com pillar@pillarmfg.com

Used cores

8

Axle 60 inches Tires 26.5 x 25 wide, wet disc, 20,000 lbs cap. as is or rebuilt

DougCastron Edmondson Mike

705-682-0687 705-693-9870

Doug@southbaydesign.ca MikeC@cardinalmining.com

John Deere Getman John Deere Goodyear

AN64x 25 26.5

KUBOTA GRIZZELY

M5030DT

11

KUBOTA M5030DT 4X4 PARTS MACHINE GRIZZELY SCREENTRACTOR BARS

Kevin McDowell McDowell Kevin

705-566-8190 705-566-8190

kevin_m@bmcdowell.com kevin_m@bmcdowell.com

Kubota Jacklegs

RTV1140

13

Kubota RTV1140, Parts, Edmonton numerous models available, NEW rebuilts or various conditions

RandyMcDowell Size Kevin

780-469-5677 705-566-8190

rsize@amt-inc.ca kevin_m@bmcdowell.com

KubotaClark Jarvis

RTV900

NEW

1

Kubota RTV900 (Parts), IN Edmonton JARVIS CLARK PARTS STOCK

Randy Size Greg Pillar

780-469-5677 269-628-5605

rsize@amt-inc.ca pillar@pillarmfg.com

LincolnClark Jarvis

MJM 20B

cores

12

Auto grease system - numerous parts available Parting out, MJM-20B

Mike Levin Castron Mark

705-693-9870 303.567.4174

MikeC@cardinalmining.com mark.levin@minenv.com

LONGTOM JCI

125M

NEW

2

LONGTOM 250 DRILL MUFFLED NEW or good condition for sale standard and ejector buckets for 125M JCI

Kevin McDowell Bill Green

705-566-8190 520-805-0739

kevin_m@bmcdowell.com desertdiesel@gmail.com

MacLean JCI

928 125

41

Complete BoomJCI-125M ( C Arm Included !Reconditioned, buckets ), Drill Feed Assemblies, Bolt Feed Assemblies

JoelleJulum Garside Blaze

705-855-4254 (208) 661-7510

joelle.garside@tesinc.ca Blazejulum55@gmail.com

MacLean JCI

928 125M

11

Rollover JCI-125M canopy, Front Outriggers, Unused, boom assembly Rear Outriggers

JoelleJulum Garside Blaze

705-855-4254 (208) 661-7510

joelle.garside@tesinc.ca Blazejulum55@gmail.com

600M

11

MARCOTTE M40 FLAT DECK-2 PIECE,471DDEC TURBO,PARTS JCI 600M, CAT 3306,LCB, CN, ROCKWELL 5225 PARTS MACHINEMACHINE,28420-119 TRANS

Kevin McDowell McDowell Kevin

705-566-8190 705-566-8190

kevin_m@bmcdowell.com kevin_m@bmcdowell.com

2

MARCOTTE M40 SCISSORLIFT PARTS MACHINE AXLE-PARTS IN STOCK

KevinPillar McDowell Greg

705-566-8190 269-628-5605

kevin_m@bmcdowell.com pillar@pillarmfg.com

wheels axles Axle 60 and inches wide, wet disc, 20,000 lbs cap. as is or rebuilt

Fred Delabbio Doug Edmondson

705-560-3705 705-682-0687

info@nelmaco.com Doug@southbaydesign.ca

1

MINEJACK PARTS TRACTOR IN STOCK 4X4 PARTS MACHINE KUBOTA M5030DT

Scott Pillar Kevin McDowell

269-628-5605 705-566-8190

pillar@pillarmfg.com kevin_m@bmcdowell.com

3

Conversion kit thatParts, eliminates the transfercase in the rear frame. Kubota RTV1140, Edmonton

Doug Edmondson Randy Size

705-682-0687 780-469-5677

Doug@southbaydesign.ca rsize@amt-inc.ca

MARCOTTE JCI MARCOTTE John Deere

M40

NEW

Mine Deere Car John

Wheels AN64

Used

Minejack KUBOTA

M5030DT

NEW

Minejack Kubota

M30-40-50 RTV1140

NEW

Miscell Items Kubota

RTV900

11

Large assortment of pumps, generators, compressors, tuggers, valves, silos, electric motors, hoist rope, Kubota RTV900 (Parts), Edmonton

Mark Alexander Randy Size

705-671-2100 780-469-5677

mark@minesource.com rsize@amt-inc.ca

MONTABERT Lincoln

Drifters

cores

2

numerous models Auto grease systemavailable, NEW rebuilts or various conditions

KevinCastron McDowell Mike

705-566-8190 705-693-9870

kevin_m@bmcdowell.com MikeC@cardinalmining.com

Montabert LONGTOM

HC

NEW NEW

4

New Montabert and HC-50NEW for good price. LONGTOM 250 HC-109 DRILL MUFFLED or good condition

Dominique Trottier Kevin McDowell

819-279-5860 705-566-8190

jdtrottier@hotmail.com kevin_m@bmcdowell.com

Rebuilt

12

drills rebuilt by OEM and Included ready to work. Complete Boom ( C Arm ), Drill Feed Assemblies, Bolt Feed Assemblies

Frank Garside Crites Joelle

807-221-4670 705-855-4254

sales@resequip.com joelle.garside@tesinc.ca

11

100 HP MOTOR W FUNK PTO Rollover canopy, Front Outriggers, Rear Outriggers

Kevin Garside McDowell Joelle

705-566-8190 705-855-4254

kevin_m@bmcdowell.com joelle.garside@tesinc.ca

Montabert MacLean

HC109 928

MOTOR MacLean

928


MTI Sandvik MONTABERT

Shaft Jumbo 006 Drifters

Oldenburg Sandvik Montabert

CH38 Drifters HC

The Mining Perkins Sandvik Montabert Sandvik Make MOTOR Sandvik MTI

3 numerous Shaft Jumbo 1 SANDVIK TORO 006,EOD, PARTS MACHINE models available, NEW rebuilts or various conditions

Rebuilt NEW

Equipment ENGINE Prospector NEW p.42 HL510 HC109 Rebuilt HLX5 Drifetrs Model 006 L550

NEW Rebuilt Condition NEW NEW

Sandvik Drifters Sandvik/Secom Hydrastar 350 MTI Shaft Jumbo

Rebuilt

Sandvik HL510 17 Sandvik/Secom Plution Oldenburg CH38

Rebuilt

Sandvik Secan Perkins

Rebuilt NEW

Sandvik SHEAVE Sandvik

HLX5 Drifetrs S-250 ENGINE L550

NEW NEW

Sandvik/Secom 006 Hydrastar 350 SHEAVE Sandvik

Rebuilt NEW

Sandvik/Secom Drifters Plution 17 TAMROCK Sandvik

NEW

Secan TAMROCK Sandvik

Rebuilt

S-250 Drifters HL510

FrankMcDowell Crites Kevin McDowell Kevin

807-221-4670 705-566-8190 705-566-8190

sales@resequip.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com

Frank McDowell Crites Kevin Dominique Trottier

807-221-4670 705-566-8190 819-279-5860

sales@resequip.com kevin_m@bmcdowell.com jdtrottier@hotmail.com

Tim McDowell Randy Size Frank Crites

1-602-885-6560 780-469-5677 807-221-4670

tim@mcdowellequipment.com rsize@amt-inc.ca sales@resequip.com

Scott McDowell Pillar Mark Alexander Contact Kevin

269-628-5605 705-671-2100 Telephone 705-566-8190

pillar@pillarmfg.com mark@minesource.com E-mail kevin_m@bmcdowell.com

KevinLevin McDowell Mark Frank Crites

705-566-8190 303.567.4174 807-221-4670

kevin_m@bmcdowell.com mark.levin@minenv.com sales@resequip.com

RandyLevin Size Mark Frank Crites

780-469-5677 303.567.4174 807-221-4670

rsize@amt-inc.ca mark.levin@minenv.com sales@resequip.com

Mark Alexander Frank Crites Tim McDowell

705-671-2100 807-221-4670 1-602-885-6560

mark@minesource.com sales@resequip.com tim@mcdowellequipment.com

Tim McDowell Kevin McDowell Scott Pillar

1-602-885-6560 705-566-8190 269-628-5605

tim@mcdowellequipment.com kevin_m@bmcdowell.com pillar@pillarmfg.com

Mark McDowell Levin Kevin McDowell Kevin

303.567.4174 705-566-8190 705-566-8190

mark.levin@minenv.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com

Mark McDowell Levin Greg Pillar Kevin

303.567.4174 269-628-5605 705-566-8190

mark.levin@minenv.com pillar@pillarmfg.com kevin_m@bmcdowell.com

Frank McDowell Crites Kevin Randy Size

807-221-4670 705-566-8190 780-469-5677

sales@resequip.com kevin_m@bmcdowell.com rsize@amt-inc.ca

KevinAlexander McDowell Scott Pillar Mark

705-566-8190 269-628-5605 705-671-2100

kevin_m@bmcdowell.com pillar@pillarmfg.com mark@minesource.com

Kevin McDowell Mark Alexander Tim McDowell

705-566-8190 705-671-2100 1-602-885-6560

kevin_m@bmcdowell.com mark@minesource.com tim@mcdowellequipment.com

GregLevin Pillar Scott Mark

269-628-5605 303.567.4174

pillar@pillarmfg.com mark.levin@minenv.com

numerous available, NEW rebuilts various conditions TAMROCK TORO no 007 ,2001,6 EOD,orMERC,27000KG,PAINTED, PARTS MACHINE 11 Parting out models carrier, booms or YARD feeds

KevinLevin McDowell Mark

705-566-8190 303.567.4174

kevin_m@bmcdowell.com mark.levin@minenv.com

TIMBERJACK PARTS IN STOCK, 2 Secan two rear frames for TORO 40/50 S-250 Stopers

Scott Pillar 269-628-5605 AibarCrites Tokzhumanov 807-221-4670 416-567-4077 Frank

pillar@pillarmfg.com aibar.tok@gmail.com sales@resequip.com

Mark Alexander 705-671-2100 AibarMcDowell Tokzhumanov 705-566-8190 416-567-4077 Kevin

mark@minesource.com aibar.tok@gmail.com kevin_m@bmcdowell.com

Scott McDowell Pillar Kevin McDowell Kevin

269-628-5605 705-566-8190 705-566-8190

pillar@pillarmfg.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com

KevinPillar McDowell Greg

705-566-8190 269-628-5605

kevin_m@bmcdowell.com pillar@pillarmfg.com

AibarMcDowell Tokzhumanov 705-566-8190 416-567-4077 Kevin McDowell 705-566-8190 Kevin

aibar.tok@gmail.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com

AibarPillar Tokzhumanov 269-628-5605 416-567-4077 Kevin McDowell 705-566-8190 Scott

aibar.tok@gmail.com kevin_m@bmcdowell.com pillar@pillarmfg.com

KevinAlexander McDowell Mark

705-566-8190 705-671-2100

kevin_m@bmcdowell.com mark@minesource.com

Kevinor McDowell Dan Bart Hurley Scott Pillar

705-566-8190 705-682-0681 269-628-5605

kevin_m@bmcdowell.com info@thehurleygroup.com pillar@pillarmfg.com

KevinMcDowell McDowell Greg Pillar Kevin

705-566-8190 269-628-5605 705-566-8190

kevin_m@bmcdowell.com pillar@pillarmfg.com kevin_m@bmcdowell.com

Rebuilt Drillmodels Assembly (060150), drills rebuilt by OEM conditions and ready to work. numerous available, NEW rebuilts various 43 New Montabert HC-109 and HC-50 for goodorprice. 1 drills (1) New Perkins 6cyland Engine!!New C6 Cat engine! HL510, L550 Parts 22 rebuilt byDrifters OEM ready to work.

& Components

SANDVIK PARTS STOCK 2 only Drifters model Description 12 100 HPSandvik MOTOR WIN FUNK PTOHLX5 rebuilt by Barrick Gold 1 MTI SANDVIK TORO 006,EOD, PARTS MACHINE 2 2New"" Sandvik L550 Drifter PARTS IN STOCK

32

numerous models available, NEW or variousspare conditions Two Sandvik rebuilt Hydrastar 350s,rebuilts with numerous parts Shaft Jumbo

2 Rebuilt HL510,Drill L550 Drifters Parting out carrier, no (060150), booms or drills feedsrebuilt by OEM and ready to work. 31 Assembly 2 only Drifters model HLX5 by Barrick Gold Secan S-250 Stopers 12 (1) NewSandvik Perkins 6cyl Engine!!New C6rebuilt Cat engine! 2- New"" Sandvik L550 Drifter 2 SANDVIK 100TON,6 SHEAVE BLOCK NEW PARTS IN HOOK STOCK

Two Sandvik rebuilt Hydrastar 350s,MACHINE with numerous spare parts 30 TON HOOK BLOCK,4 SHEAVE NEW 12 SANDVIK TORO 006,EOD, PARTS 1 numerous Parting outmodels carrier, no or feeds TAMROCK PARTS INbooms STOCK available, NEW rebuilts or various conditions

2

Secan S-250 Stopers numerous models available, NEW rebuilts or various conditions HL510, L550 Drifters

100TON,6 SHEAVE HOOK BLOCK NEW by Barrick Gold PARTS IN STOCK, 22 2TIMBERJACK only Sandvik Drifters model HLX5 rebuilt

SHEAVE Timberjack Sandvik

HLX5 Drifetrs

NEW Rebuilt

SHEAVE Tires Sandvik

L550

NEW NEW

2 230New"" TON HOOK BLOCK,4 SHEAVE NEW(5) 29.5-25 L5 Firestone PTLD, (4) 35/35R33 Bridgestone VSNT Tires - (5) 29.5-25 Firestone PTLD L5S, 21 Sandvik L550 Drifter

NEW Rebuilt

2

TAMROCK TORO Sandvik/Secom Hydrastar 350 TAMROCK Drifters17 TORO 007 Sandvik/Secom Plution

TAMROCK PARTS IN STOCK350s, with numerous spare parts TORO PARTS IN STOCK, Two Sandvik rebuilt Hydrastar

Timberjack TORO Secan

40/50 S-250

NEW Rebuilt

Tires TORO SHEAVE

40/50

NEW

Tires -box (5) SHEAVE 29.5-25 Firestone PTLD L5S, dump for TORO 40/50 BLOCK 21 100TON,6 HOOK NEW(5) 29.5-25 L5 Firestone PTLD, (4) 35/35R33 Bridgestone VSNT

TORO SHEAVE

400

NEW NEW

PARTS IN STOCK, TORO TURBO PARTS 21 30 TON400@6V92DDEC HOOK BLOCK,4 SHEAVE NEW 19D LCB AXLES

TORO TAMROCK

007 400

TORO TAMROCK

40/50 400D Drifters

TORO Timberjack

40/50 400D

TORO Tires

400 501

TORO Ventilation TORO

400 Woods Joy/

NEW NEW

TORO Wagner TORO

400D 007

NEW

TORO Wagner TORO

400D 40/50

TORO Wagner TORO

501 MT-426,416 40/50

Ventilation Wagner TORO

Joy/ Woods RIMS 400

NEW

Wagner TORO

ST-2D 400

NEW

Wagner TORO

ST-3.5 400D

3 TORO (multiple) Wagner JCI cylinders (1) Wagner ST-3.5and Stabilizer link,PARTS unused,MACHINE 1) Wagner ST-3.5 boom assembly 21 400D@6V92DDEC, LCB,

Wagner WAGNER TORO

MT-426,416 ST-5B 400D

Numerous MT-426,416, parts inPARTS stock MACHINE37770,32421,5402 PARTS MACHINE WAGNER ST5B LHD@F8L413 52 TORO 400D,F10L413@215HP,LCB,(48705),19D,

Wagner WAGNER TORO

RIMS ST-6 501

Wagner Ventilation

ST-2D ST-710 Joy/ Woods

Wagner Wagner

ST-3.5 Bucket NEW ST-710 NEW

WAGNER Wagner

ST-5B ST-8A

WAGNER Wagner Wagner

ST-6 ST-8B MT-426,416

cores

Wagner Wagner

ST-710 ST-8B RIMS

Rebuilt

Wagner Wagner

ST-710 Bucket ST-8B ST-2D

NEW

WAGNER Wagner Wagner

ST-8A ST-8B ST-3.5

Wagner WAGNER

ST-8B ST-5B

Wagner WAGNER

ST-8B ST-6

Wagner Wagner

ST-8B ST-710

Rebuilt

Wagner Wagner

ST-8B Bucket ST-710

NEW

Wagner WAGNER

ST-8B ST-8A

Wagner Wagner

ST-8B ST-8B

Wagner Wagner

ST-8B ST-8B

Wagner Wagner

ST-8B ST-8B

NEW NEW

007 ,2001,6 EOD, MERC,27000KG,PAINTED, PARTS MACHINE 1 TAMROCK TAMROCKPARTS TORO MODEL 400 YARD PARTS MACHINE IN STOCK two rear400D@6V92DDEC, frames TORO 40/50 2 numerous TORO LCB, modelsforavailable, NEWPARTS rebuiltsMACHINE or various conditions

1 TIMBERJACK dump box for TORO 5 TORO 400D,F10L413@215HP,LCB,(48705),19D, 37770,32421,5402 PARTS MACHINE PARTS40/50 IN STOCK,

400@6V92DDEC TURBO LCB L5 AXLES TORO 501, CRUSHED,DDEC,LCB,21D3960,5422-114,8602-108, PARTS 11 Tires - (5) 29.5-25 Firestone PTLD PARTS L5S, (5)19D 29.5-25 Firestone PTLD, (4) MACHINE 35/35R33 Bridgestone VSNT 1 TORO TAMROCK TORO MODEL 400 used, PARTS MACHINE many surplus parts, new - good blades, nose caps, motors.... PARTS IN STOCK,

TORO 400D@6V92DDEC, LCB, PARTS MACHINE WAGNER PARTS IN STOCK 12 TAMROCK TORO 007 ,2001,6 YARD EOD, MERC,27000KG,PAINTED, PARTS MACHINE 5 two TORO 37770,32421,5402 PARTS MACHINE (multiple) Wagner JCI40/50 cylinders 23 rear400D,F10L413@215HP,LCB,(48705),19D, frames for and TORO

kevin_m@bmcdowell.com Blazejulum55@gmail.com aibar.tok@gmail.com kevin_m@bmcdowell.com sales@resequip.com aibar.tok@gmail.com

many parts, new -Dana good 19D used, blades, nose caps, motors.... Set ofsurplus 4 certified rims forTURBO axles for ST-1030 LHD. 14 TORO 400@6V92DDEC PARTS 19D LCB AXLES

Dan or Bart Hurley Mike Castron Kevin McDowell

705-682-0681 705-693-9870 705-566-8190

info@thehurleygroup.com MikeC@cardinalmining.com kevin_m@bmcdowell.com

WAGNER IN STOCK (3) WagnerPARTS ST-2DMODEL ejector and buckets used, (1)!Wagner ST-2D boom assembly 13 TAMROCK TORO 400standard PARTS MACHINE

Greg McDowell Pillar Blaze Julum Kevin

269-628-5605 (208) 661-7510 705-566-8190

pillar@pillarmfg.com Blazejulum55@gmail.com kevin_m@bmcdowell.com

BlazeMcDowell Julum Kevin

(208) 661-7510 705-566-8190

Blazejulum55@gmail.com kevin_m@bmcdowell.com

FrankMcDowell Crites Kevin McDowell Kevin

807-221-4670 705-566-8190 705-566-8190

sales@resequip.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com

Mike Castron Kevin McDowell Kevin McDowell

705-693-9870 705-566-8190 705-566-8190

MikeC@cardinalmining.com kevin_m@bmcdowell.com kevin_m@bmcdowell.com

Blaze Julum Tim McDowell Dan or Bart Hurley

(208) 661-7510 1-602-885-6560 705-682-0681

Blazejulum55@gmail.com tim@mcdowellequipment.com info@thehurleygroup.com

Blaze Julum Tim McDowell Greg Pillar

(208) 661-7510 1-602-885-6560 269-628-5605

Blazejulum55@gmail.com tim@mcdowellequipment.com pillar@pillarmfg.com

KevinJulum McDowell Blaze

705-566-8190 (208) 661-7510

kevin_m@bmcdowell.com Blazejulum55@gmail.com

KevinCastron McDowell Mike Frank Crites

705-566-8190 705-693-9870 807-221-4670

kevin_m@bmcdowell.com MikeC@cardinalmining.com sales@resequip.com

Tim McDowell Mike Castron Mike Castron

1-602-885-6560 705-693-9870 705-693-9870

tim@mcdowellequipment.com MikeC@cardinalmining.com MikeC@cardinalmining.com

Tim McDowell Mike Castron Blaze Julum

1-602-885-6560 705-693-9870 (208) 661-7510

tim@mcdowellequipment.com MikeC@cardinalmining.com Blazejulum55@gmail.com

KevinCastron McDowell Mike Blaze Julum

705-566-8190 705-693-9870 (208) 661-7510

kevin_m@bmcdowell.com MikeC@cardinalmining.com Blazejulum55@gmail.com

Mike Castron Kevin McDowell

705-693-9870 705-566-8190

MikeC@cardinalmining.com kevin_m@bmcdowell.com

Mike Castron Kevin McDowell

705-693-9870 705-566-8190

MikeC@cardinalmining.com kevin_m@bmcdowell.com

MikeMcDowell Castron Tim

705-693-9870 1-602-885-6560

MikeC@cardinalmining.com tim@mcdowellequipment.com

MikeMcDowell Castron Tim

705-693-9870 1-602-885-6560

MikeC@cardinalmining.com tim@mcdowellequipment.com

Mike Castron Kevin McDowell

705-693-9870 705-566-8190

MikeC@cardinalmining.com kevin_m@bmcdowell.com

MikeCastron Castron Mike

705-693-9870 705-693-9870

MikeC@cardinalmining.com MikeC@cardinalmining.com

MikeCastron Castron Mike

705-693-9870 705-693-9870

MikeC@cardinalmining.com MikeC@cardinalmining.com

MikeCastron Castron Mike

705-693-9870 705-693-9870

MikeC@cardinalmining.com MikeC@cardinalmining.com

Wagner ST-2D ejector and standard buckets used, (1)!Wagner 3 many (3) Rebuilt ST710 surplus parts,Booms new - good used, blades, nose caps, motors.... ST-2D boom assembly 1 WAGNER (1) Wagner ST-3.5 Stabilizer link, unused, 1) Wagner ST-3.5 boom assembly 2 New and Good used ST710 Bucket PARTS IN STOCK

ST5B LHD@F8L413 PARTS MACHINE WAGNERWagner ST8A,F12L413,SAHR UPDATE, PARTS, MACHINE 32 (multiple) and JCI cylinders 1 Numerous WAGNER ST6 2 Boom cores, asBF6M1013F is or rebuilt MT-426,416, partsPARTS in stockMACHINE

3 44

(3) Rebuilt ST710 Booms steer cores, as or rebuilt Set ofcylinder 4 certified rims forisDana 19D axles for ST-1030 LHD.

New and Good used ST710 Bucket Main control valve cores, as isstandard or rebuiltbuckets used, (1)!Wagner ST-2D boom assembly 32 (3) Wagner ST-2D ejector and WAGNER ST8A,F12L413,SAHR UPDATE, Boom cores, as is or rebuilt link, unused, 12 (1) Wagner ST-3.5 Stabilizer 1)PARTS, Wagner MACHINE ST-3.5 boom assembly Boom cores, as is or rebuilt Oscilating cradle cores, as is or PARTS rebuilt MACHINE 22 WAGNER ST5B LHD@F8L413 4 WAGNER steertub cylinder as is orPARTS rebuilt MACHINE rear cores 12 ST6cores, BF6M1013F

cores

kevin_m@bmcdowell.com tim@mcdowellequipment.com pillar@pillarmfg.com

Kevin Tokzhumanov McDowell 705-566-8190 Frank Crites 807-221-4670 Aibar 416-567-4077

4 TORO Set of501, 4 certified rims for Dana 19D axles for ST-1030 LHD. WAGNER ST6 BF6M1013F PARTS MACHINE 11 CRUSHED,DDEC,LCB,21D3960,5422-114,8602-108, PARTS MACHINE

cores

705-566-8190 1-602-885-6560 269-628-5605

Kevin Tokzhumanov McDowell 705-566-8190 Blaze Julum (208) 661-7510 Aibar 416-567-4077

TORObox 501, CRUSHED,DDEC,LCB,21D3960,5422-114,8602-108, PARTS MACHINE Numerous MT-426,416, 11 dump for TORO 40/50parts in stock

Rebuilt NEW

Kevin McDowell Tim McDowell Scott Pillar

Main control valveBooms cores, as is or rebuilt operator compartment cores 32 (3) Rebuilt ST710 Boom asused is orST710 rebuilt Bucket 8 cu and ydcores, bucket cores 22 New Good

Oscilating cradle cores, rebuilt Dump Cylinder cores, asas is is oror rebuilt 22 WAGNER ST8A,F12L413,SAHR UPDATE, PARTS, MACHINE rear tub cores Bogey cores 22 Boom cores, as is or rebuilt

operator compartment Lot Drivelines cores as cores 42 steer cylinder cores, is or rebuilt

8 cu control yd bucket cores Hydraulic pipes, Lot Pipes 22 Main valve cores, ascores is or rebuilt


IN ANY INDUSTRY, ANYWHERE AROUND THE WORLD,

The name Rastall is recognized around the globe from Norway to Australia, as a fastening and specialized tool company that helps hold the world together with a sense of security and quality. Rastall Mine Supply was created in 1975 to provide specialized fasteners to the mining industry when Don Rastall came up with a simple, yet innovative idea; an adjustable miner’s wrench that opened up a little wider than other wrenches available at the time making the miner’s work easier and quicker. The Miner’s wrench was an immediate hit and soon spawned a variety of specialized wrenches including a version with a hammer head grafted onto the end, a Spud Wrench and a Speed Wrench designed for specialized piping. Today, Rastall tools are distributed by over sixty companies around the world and are depended upon in job sites from the Los Angeles Via Duct, to the massive Boston tunneling project. Even the American military forces count on the quality of Rastall tools for successful missions. Rastall Nut & Bolt is the largest fastening supplier in the North carrying over twenty million pieces of inventory at any one time, serving the giants of the forestry and construction industries that require a thousand specialized fasteners to the homeowner or mechanic who needs one single nut or bolt to successfully complete a project. When it comes to being successful at helping hold the world together, the Rastall name can always be counted on to have the right tool to deliver the nuts and bolts of success.

in a range of industries, across the continent and around the globe, L&M Powertrain Parts is renowned for the reliability of its products, the speed of its response, the expertise of its people. Our export department is fully versed in handling contractual and currency issues for projects worldwide, and distance is no obstacle when it comes to ongoing support of the site. With a full inventory of the top brand-name parts you need to keep the wheels turning, you can plan on keeping your people productive at a price that keeps you profitable. QUALITY, DELIVERY, PRICE We have been able to increase our business because the parts we supply perform reliably and are priced competitively. Our plans are to continue expanding L&M and to concentrate on supporting our Dealer Network. WIDEST, HIGHEST, LOWEST, FASTEST Our business philosophy is simple: we stock the widest range of the highest quality parts available, we deliver them in the fastest time, at the lowest possible price. The success of this philosophy shows in the number of our repeat customers. Satisfied dealers, who continue to order, have helped L&M become one of the fastest-growing parts suppliers across North America and Internationally. L&M Powertrain Parts Limited 
 201 Snidercroft Road Ontario, Canada L4K 2J9 
 Telephone: 905-669-2292 Fax: 905-669-6319 
 Toll-Free: 1-800-387-3765 
 E-mail: parts@landmparts.com Website: www.lmpowertrainparts.com

Powertrain P

Normet is an innovative technology company with a passion to offer continuous improvement to underground construction and mining processes for increased safety, productivity and profitability. This is accomplished by providing complete technical solutions that create value through saving costs and shortening process cycle times. From conception to production to application, our solutions are developed based on the welfare of people and on the care of the environment. Normet has broad underground offerings:

> Equipment for concrete spraying and transport, explosives charging, scaling, lifting, installation works, and logistics. >

Construction chemicals for sprayed concrete, concrete ad mixtures, injection systems for rock improvement, reinforce ment systems for high deformation conditions and spray ap plied waterproofing systems.

> High quality and innovative rock reinforcement products that reduce the risk and consequences of accidents and facilitate high productivity in challenging rock conditions.

268 Hemlock St., Sudbury ON Canada P3C 1H9 705-675-2431, fax: 705-675-6502 Toll Free 1-800-461-6255 E-mail: crastall@rastallcorp.com www.rastalltool.com

Normet Americas, Inc. 1414 S Gladiola St., Suite#100 Salt Lake City, UT 84104, USA Tel: +1 (801) 596 4700

Normet Canada Ltd. 1 Columbus St. Lively, Ontario P3Y 0B3, Canada Tel: +1 705 692 2800

The Mining Equipment Prospector

p. 43


Best Products the World has to Offer... Hurley Ventilation Technologies Inc. (HVT) is an ISO 9001:2008 certified company specializing in the manufacture of new ventilation fan systems, parts and accessories. Hurley’s Canadian facilities, located in both Ontario and Quebec, produce affordable, rebuilt and newly manufactured ventilation products daily. Considerable effort is expanded to ensure that Hurley products are the best the world has to offer. The company maintains strict quality standards, which meet or exceed new manufacturer product performance and safety standards. These standards are achieved through dedicated and experienced personnel and a series of rigorous product performance tests. These tests ensure the quality, integrity and longevity of all repaired, remanufactured and new products. In support of this extensive product testing, customers are provided with a 12 to 24 month warranty on all Hurley manufactured and remanufactured ventilation products. Hurley Ventilation Technologies Inc.... Working Hard to Earn your Business. Hurley Ventilation Technologies Inc. 10 Nelson Road, P.O. Box 220 Lively, Ontario, Canada P3Y 1M3 Tel: (705) 682-0681 Fax: (705) 682-2572 www.thehurleygroup.com Info@thehurleygroup.com

The Hurley Group – HEATING UP “The Hurley Group” continues to grow and strengthen its niche in Industrial Ventilation. We are pleased to announce the addition of “Hurley Industrial Thermal Technologies Inc.” (HITT Inc.) to its portfolio. Along with this addition, “The Hurley Group” is pleased to welcome Denis Cloutier, a mechanical engineer, with 20+ years of experience in the heater design and manufacturing industry. HITT Inc. will be the design and manufacturing division for propane and / or natural gas air heating systems for mining, tunneling and industrial applications worldwide. The addition of HITT Inc. completes, “The Hurley Group’s” total Ventilation Package offerings, allowing for a one stop-shop for Mining, Civil and Industrial clients looking for a turn-key thermodynamic ventilation solution for their projects. HVT Inc. and HITT Inc. can now offer ventilation fan manufacturing, e-house package, heater and ductwork manufacturing, installation, engineering design and commissioning to clients, putting the responsibility and accountability in the hands of the experts, making for a seamless transition from the feasibility design stage to project start-up. “We don’t hold our breath when it comes to quality.” For more information, please contact: Dan Hurley P. Eng. President Telephone: 705-682-0681 ext. 224 Mobile: 705-670-5175 E-mail: Dan@thehurleygroup.com

Bart Hurley B. Comm Sales and Marketing Manager Telephone: 705-682-0681 ext. 223 Mobile: 705-690-7353 E-mail: Bart@thehurleygroup.com 10 Nelson Road, P.O. Box 4269 Lively, Ontario, Canada P3Y 1M3 www.thehurleygroup.com

DUX Machinery Corporation is a Canadian manufacturer

and supplier of heavy-duty underground equipment. With over 45 years of experience, DUX products are designed to meet the needs of underground mining and tunneling projects worldwide. DUX manufactures a full range of products including: • Dump Trucks • Teledumpers • Ejector Trucks • Scoop Loaders • Scalers • Multi-Purpose Cassette Systems • Boom Trucks • Scissor Lift Trucks With every truck sold, DUX is committed to offering superior after-sales service and parts back-up through its worldwide network of agents and distributors. DUX MACHINERY CORPORATION

615 Lavoisier, Repentigny QC, Canada J6A 7N2 PH 450-581-8341 FX 450-581-5138 www.duxmachinery.com

s

Spread the news

The Mining Equipment Prospector extends an invitation to all mining equipment related organizations to e-mail their press releases, articles or comments to: list@MiningEquipment.net If it is equipment related, our audience is interested.

Reach the Buyers Now.

The Mining Equipment Prospector

p. 44


Rock-Tech is a Canadian manufacturer of equipment designed purposely for underground mining applications. We offer a comprehensive range of models in each of our product lines:

• utility support vehicles • stationary rockbreaking systems • fuel/oil/grease handling/storage products

Our years of experience in mining applications have enabled us over the years to provide products that are cost-effective, productive and reliable to mining companies such as; Vale, Xstrata, De Beers, Diavik Diamond Mine, Goldcorp, Agnico Eagle, Barrick Gold, BHP Billiton, IAMGOLD while being mindful of safety and efficiency of workers. Our after sales and service teams are equipped to offer you extensive support by providing the following:

• • • • • •

comprehensive parts management program trained field service technicians certified rebuild programs service programs operator and mechanical training programs equipment audit programs

Our future sustainability and viability will be achieved through our commitment and social responsibility as we striving for the following: • • •

continually pursue new technologies through investment, research and promoted innovation establish long term partnerships with our customers by developing products that offer solutions and added value constant improvement to our health, safety and environmental practices of our operations for our employees, customers, suppliers and our community.

For more information, contact: 160 Magill Street Lively (Sudbury) Ontario Canada P3Y 1K7 Tel: (705) 692-7625 fax: (705) 692-9941 e-mail: sales@rock-tech.net website: www.rock-tech.net

Since 1977, Bull Powertrain has been servicing the power train needs of mines around the world with Genuine Dana (Clark) components and parts. With one of the industry’s largest inventories of Dana transmissions, torque converters, differentials, axles, planetaries and related parts, and a component exchange program like no other, Bull Powertrain has gained a reputation for reducing production downtime on heavy duty mining vehicles, and for providing fast, efficient service, anywhere in the world. Not only does Bull Powertrain supply new, Genuine Dana products, their experienced mechanical team also rebuilds Dana powertrain components and pre-tests them using an advanced testing system. Whether new or rebuilt, all powertrain items carry a 6-month or 1000-hour warranty. We are now completing the POWER LINK between BULL TORQUE CONVERTERS to BULL TRANSMISSIONS to BULL AXLES. With our new in-house driveline manufacturing and repair facility. BULL has the ability to supply drivelines and parts to all makes OF OFF-HIGHWAY equipment using Genuine parts, including the following: Wagner Sandvik Tamrock Atlas Copco Timberjack Minejack EJC Toro MTI JCI Authorized distributor for Spicer Drivelines and GWB Bull Powertrain’s success is based on service, quick delivery and superior performance on all levels.

Bull Powertrain 1510 Fairburn Street Sudbury, ON CAN P3A 1N7

The Mining Equipment Prospector

p. 45

Tel: 705-560-BULL (2855) Fax: 705-560-5327 Toll Free:1-800-461-5959 http://www.bullind.com e-mail: general@bullind.com


Miller Technology Inc. Established in 1979, ISO 9001:2008 registered, is a privately owned and operated Canadian business located in North Bay, Ontario that specializes in mobile and utility equipment for the mining and tunneling industry.

One

of three strong companies within the Walden Group, Walden Equipment is an industry leader in mine and industrial equipment. For nearly two decades, we have provided service, sales, leasing and rental of certified and reliable, new and late model brand mining and industrial equipment to the industry. Our extensive range of equipment includes: Scissor Lifts, Multi-Cassette Trucks, Scissor Boom Trucks, Boom Trucks, Fuel Lube Trucks, Personnel Carriers, Narrow-Vein Utility Vehicles, Transmixers, Concrete Trucks, Anfo Loaders, Vacuum Trucks, Scoops, Haul Trucks, Jumbo Drills and Hydraulic, Electric and Air Tuggers. At Walden Equipment, we employ qualified experts in maintenance, repair and remanufacture, both of surface and underground equipment. Our range of services runs the gamut and includes in-depth equipment training, cable tensioning to complete hoist installation and winching services. As a matter of fact, you could say we have the market cornered with a full line of new and used winches and tuggers, and our proven turnkey rope tensioning services across the country and beyond. Walden Equipment is also lead distributor of J&S Manufacturing high quality utility equipment, which is renowned for being: - made to order - extremely mechanically friendly - cost efficient - easy to troubleshoot - sent straight to work from factory - simple and designed for the end user Our comprehensive fleet of machines features interchangeable parts which in itself is an outstanding feature. As well, each piece of equipment is extensively tested prior to shipment: emissions, breaks, quality control and other checks are conducted for each machine. Success has translated into rapid expansion for Walden Equipment. Our workforce has grown to the tune of 150% in the past few years with sales and service extending to Honduras, Mexico, Peru, Brazil, Chile, the US, Australia, Africa, and of course Canada. And recently we opened a new branch in Timmins, Ontario to increase our capacity. Our name and products are quickly becoming well known and well established in the global mining equipment industry -- and we’re prepared to meet the demand. Our goal is to provide our customers with prompt service and parts delivery direct to your site when required. Your productivity is our main objective and our reliable staff of licenced mechanics, technicians, and sales support will be sure to assist you in with all your equipment needs.

106 Fielding Road, Lively, ON P3Y 1L5 Phone: 705-682-2084, Fax: 705-682-2564 2479 Riverside Drive Timmins, ON P4R 1M9 Phone: (705) 360-5177

Specialty options can be adapted such as; scissorlifts, aerial booms, work platforms; cable reel handlers, compact road graders, ANFO/ Emulsion loaders, forklifts, breaker hammers, wheel loader telescopic boom with various attachments, swivel man-baskets, heavyduty Hurth axles, fuel-lube trucks, 2-14 passenger trucks, water tanks, disposal boxes, ground engaging options, torque test benches cable/ANFO hose inserters, ROPS/FOPS, and much more. Miller Technology’s mission is to develop products that meets your increasing needs for improved safety, productivity, and utilization while lowering your total operating costs through exceptional service & sales support. Contact: Steve Dunlop Director of Sales and Services 175 Eloy Road North Bay, Ontario P1B 9T9 Canada Phone: 1-705-476-4500 Fax: 1-705-476-8811 E-mail: mtsales@millertechnology.com www.millertechnology.com

BPT Components & Parts Inc. is a leader in the Clark Powertrain market thanks to our state-of-the-art dyno-test machine which ensures that our products meet or exceed OEM standards. We inventory over $5 million in Clark Dana Powertrain components and replacement parts for the mining, logging and construction industries. With warehouses in Toronto and Sudbury, Ontario, Canada as well as Buffalo, NY, USA, we reduce equipment downtime, saving you valuable money and adding profits to your bottom line. BPT’s staff has worked with dealers and companies to solve many or all of your equipment problems. BPT can keep your equipment up and running with the highest quality parts and components at exceptional savings for you, the customer. BPT is now an authorized dealer for AxleTech as well as for many OEM manufacturers of equipment and products such as Stampler Corp., A.L. Lee, Mine Radio Systems Inc., Trojan Tire Inc., Catalytic Exhaust Products Ltd., and Paurat GmbH. BPT now supplies industrial seats & accessories Grammer - ISRI - BE-GE - Pilot.

HEAD OFFICE

Timmins Branch

Miller Technology offers products that are designed and built for rugged applications, including the Miller Max Mid-Range Utility 5-Ton Trucks, 4 & 6 wheel drive graders, Jeep J8 Diesel, Ram 3500 & 5500, Toyota 1-Ton Landcruiser, and JCB personnel & utility carriers.

Spanish Branch

26 Gagan Road Spanish, ON P0P 2A0 Phone: (705) 844-2598

Canadian Phone: 705-524-8400 Toll free 800-268-0051 USA Phone: 716-874-8990 Toll free 800-626-3947 PO Bag 4100 Sudbury, ON., Canada P3A 5Y9 www.bpt.on.ca The Mining Equipment Prospector

p.46


March 8, 2017

PDAC 2017 Convention exceeds expectations Toronto, March 8, 2017 – Attendance at the Prospectors & Developers Association of Canada’s (PDAC) 2017 Convention totalled 24,161—a strong indication that confidence has returned to the mineral exploration and mining industry. The annual PDAC Convention—the world’s largest industry event—attracted investors, analysts, mining executives, prospectors, geologists, government officials and students. “The mineral exploration and mining industry is cyclical in nature and has faced a variety of economic challenges over the past several years, but optimism has always remained and it’s fantastic to see this being reflected at the PDAC Convention,” says PDAC President Glenn Mullan, referring to sold out exhibitor space, investor meetings, Short Courses, Mineral Outlook Luncheon, and Awards Gala. “There was an upbeat vibe throughout the convention—a positive sign for the sector going forward.”

We look forward to seeing you at the PDAC 2018 Convention, March 4-7, 2018—where the world’s mineral and finance industry will once again meet! About the PDAC The Prospectors & Developers Association of Canada (PDAC) is the leading voice of the mineral exploration and development community. With over 8,000 members around the world in all sectors of the mining industry, the PDAC’s mission is to promote a globally-responsible, vibrant and sustainable minerals industry. As the trusted representative of the sector, PDAC encourages best practices in technical, operational, environmental, safety and social performance.

PDAC, in partnership with the World Economic Forum, hosted the International Mines Ministers Summit (IMMS) for the second year, bringing together 25 Ministers responsible for mining from around the world. The event, hosted at BMO, provided an important setting for the global mining community to explore challenges and opportunities affecting the industry. This year’s Summit focused on innovation in the mining industry and the clean innovation agenda.

“PDAC is seen as the voice of responsible mineral exploration and mining, not only in Canada but also abroad,” says PDAC Executive Director Andrew Cheatle. “We must continue to build strong working relationships, both nationally and internationally, and the PDAC Convention is the best opportunity to make these connections and showcase our industry and its importance to social-economic development.” The Honourable Jim Carr, Canada’s Minister of Natural Resources, announced the renewal of the Mineral Exploration Tax Credit (METC) for one year, along with the maintenance of the flow-through share system. Overall, over 20 Parliamentarians attended including three Cabinet Ministers.

Media contact Kristy Kenny Coordinator of Communications 416-807-8214 kkenny@pdac.ca

The Mining Equipment Prospector

p.47



Raise Climber Parts & Accessories

Sales Rentals Repairs

No matter whether you are in construction or mining, there is only one method that works successfully when driving shafts and raises in different types of rock. And it works despite all the variations to be found under different working conditions. It’s the Alimak method. In recent decades the Alimak method has been used to drive more shafts and raises than any other system. The main reason for this is the freedom it offers in choosing both inclination and size of cross section. Another reason is that you can correct the alignment of the shaft rapidly and easily to arrive right on your target.

Wilson Mining Products

1015 rue de l’Echo Val d’Or, Quebec J9P 6X6 Canada

tel: 819.824.6602 • fax: 819.825.1438 • sales@wilson-mining.com • www.wilson-mining.com

Agrale 4x4 pick up, Sprint 4.07 TCE 4 cyl inline diesel engine. Dana front and rear axles. Contact: Sandy Baril at Marcotte Mining Machinery tel: 705-566-5030, e-mail: info@mar-inc.com

ref. # 5143

2007 DUX S1 Porter Truck c/w Hiab boom cassette and crane. Encl. cab with a/c and heat. 543 hrs. Parts and Service manuals. Contact Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca ref. # 5154

Outdoor Displays Outdoor banner stands Portable outdoor billboards Portable flags up to 17’ tall Rotating outdoor banners/signs Rotating flags • Study outdoor construction • Quick and easy to assemble • Double sided graphics available

Authorized Dealer The Mining Equipment Prospector t: 705.560.5519, f: 705.673.8463 e-mail: list@MiningEquipment.net

Southbay Sub “0” man carrier, Deutz engine or other, Clark-Hurth FT-12000 powershift 3 fwd 3 rev & 171 axles load 19,800 lbs., wet disc spring applied brakes... For more information, call Doug Edmondson at 705-682-0687, fax: 705-682-0690. e-mail: doug@southbaydesign.ca

NEW 22,000 lbs full drum linepull air winch. This WA220 air winch is in stock for SALE or RENT. For more information contact Frank Crites at Resource Equipment Sales. tel: 705-822-1586 or e-mail: fcrites@resequip.com

ref. # 556

ref. #1323


Wilson Mining Products 1015 rue de l’Echo Val d’Or, Quebec J9P 6X6 Canada

tel: 819-824-6602, fax: 819-825-1438 sales@wilson-mining.com www.wilson-mining.com

Versa-Matic Diaphragm Pumps

ref. # 2160

2015 Atlas Copco MT42 Truck, 853 hrs, Encl. ROPS/FOPS, fire suppression, Cummins diesel engine, 2 additional models available. Contact Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca

When it comes to dependable, efficient, cost-effective performance, our pumps deliver. Versa-Matic pumps run dry indefinitely without damage and are self-priming from a dry start. They can even run completely submerged or installed with flooded suction. The pump stops immediately if the discharge is clogged or closed, which means less power is consumed with no heat buildup and less wear. Just open the discharge and flow starts automatically. Easily installed split clamp bands offer quick assembly or Available in sizes from 1/2" to 3" disassembly for maintenance.

ref.# 2157 NEW DUX DT-5N u/g truck, 5 tonne, Deutz D914 L05 (97.2 HP) engine. For more information contact: Hermann Bumueller at +1-450-581-8341, sales@duxmachinery.com

Slusher Hoists & Tugger Winches We carry a complete inventory of spare parts for all sizes of Domeq and Ingersoll-Rand Slusher Hoists and Tugger Winches.

ref. # 16147

2014 Atlas Copco ST1030, Loadrite payload weighing system, includes remote control, 4 additional models available Contact Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca

New and reconditioned units available.

2014 CAT AD60, Enclosed ROPS/FOPS, with A/C, CAT C27 ACERT engine, 47.9 cyd capacity, autolube ref. # 2147C

ref. # 2161

Contact Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca

Ready to Go Scaler SCX4100CD Like New – 16 Hours, J&S Manufactured, Cummins QSB3.3 Engine, Dana 20,000 Power Shift Transmission, Dana 123 Axles. Contact: Martin Short at Walden Equipment tel: 705-682-2084, mshort@waldenequipment.ca

1 of 2- Caterpillar AD45B Trucks, C18 engines, ejector box For more information contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com

ref. # 876

ref. # 3177

2014 Atlas Copco S7D Longhole Drill 344 hrs, Open ROPS, fire suppression. Contact Amalgamated Mining & Tunnelling at 780-469-5677 or email Randy Size at rsize@amt-inc.ca

Montabert HC109 drills, (x2), Copco 1132 drill (x1), Oldenburg CH38 (060150) drills (x3). All drills rebuilt by OEM and ready to work. Contact Frank at RES Equipment Sales, tel: 705-822-1586, fcrites@resequip.com for more information or a quotation.

ref. # 2162

Sandvik / EJC 415, Mercedes 904 engine, 15 ton Capacity ROPS, Fire Suppression Contact: Tim McDowell at +1 602-885-6560, e-mail: tim@mcdowellequipment.com

$275,000 USD

ref. # 7134

NEW Hydraulic Breaker, BTI Model BXR85, 8500 Ft Lb Class, year 2016. Contact Steve Archer at Creighton Rock Drill Limited, tel: 905-673-8200, e-mail Steve.archer@creightonrock.com

ref. # 430

300 TPD Flotation milling plant equipment package, located near Rico, Colorado. Email: mark.levin@minenv.com or call: 303-567-4174 for complete list.


ref. #1059

2- 2008 MacLean SL3 Scissor lifts, 1 reconditioned and certified unit, c/w with side shift, powered by Mercedes engine Contact: Mike Castron at Cardinal Mining Equipment Group, tel: 705-693-9870, MikeC@cardinalmining.com Refurbished JCI 125M, Deutz diesel, wet disc brakes, ROPS Canopy

+

Tel: 1.705.693.9870 • Sudbury, Ontario, Canada

Quality Remanufacturing • • • •

Ready to work!!

Ready to work!!

Contact: Mike Castron at Cardinal Mining Equipment Group, tel: 705-693-9870, e-mail:

Scooptramstm Underground Haul Trucks • Transmixers • Jumbos Utility Vehicles • Locomotives Shotcreters

MikeC@cardinalmining.com

ref. #16134

A64 Getman boom truck, Palfinger boom, Canopy, MB-904 engine, Clark powertrain, and New seats.

Ready to work!!

Contact: Mike Castron tel: 705-693-9870, e: MikeC@cardinalmining.com Reconditioned Wagner ST8B, certified ROPS canopy, Brand NEW QSM11 Cummins 330 hp. engine, New 26.5X25 tires, certified rims, Clark powertrain SAHR brakes, RRC interface. Call Mike Castron at Cardinal Mining Equipment, tel: 705-693-9870, e-mail:

MikeC@cardinalmining.com

ref. #5150B

Ready to work!!

ref. #16146

2012 Minecat UT99C, Mechanics Truck, Cummins QSB 3.3, Max Load: 2000 lbs, wet disc brakes.

Ready to work!!

Cardinal Mining Equipment Group

is a Canadian remanufacturer, parts and service provider of previously owned equipment including scooptramstm, underground haul trucks, utility vehicles, jumbos and locomotives. Cardinal is a recognized distributor of underground radio remote controls. Cardinal also manufactures and sells its own RRC interface. The RRC interface has been designed to provide safe, reliable service and multi-vendor radio and receiver support. Cardinal Mining Equipment Group 1197 O’ Neil Drive West Garson (Sudbury) Ontario, Canada P3L 1L5 t: 705.693.9870, c: 705.688.3663 e: MikeC@cardinalmining.com

Call: Mike Castron at Cardinal Mining Equipment Group, tel: 705-693-9870, MikeC@cardinalmining.com

ref. #5144

(1) “NEW” (2012) Normet 6050WP DH/EH Spraymec ONLY 3 hours on HV ONLY 50 hours on engine Call: Mike Castron tel: 705-693-9870, e-mail: MikeC@cardinalmining.com

ref. #1830 Minecat MC100E. with forks, 6 person seating, wet disc brakes c/w SAHR parking brakes, ROPS canopy

Ready to work!! The Mining Equipment Prospector

page 51

Call Mike Castron at Cardinal Mining Equipment Group, tel: 705-693-9870, MikeC@cardinalmining.com

ref. #5152B


HEAD OFFICE PO Box 220, 10 Nelson Road Lively, (Sudbury) ON, Canada P3Y 1M3 ph: 1.705.682.0681

USA OFFICE P.O. Box 3, 3 Augusta West Laguna Vista, Texas, USA 78578 ph: 1.866.682.0681


Complete Turn-key thermodynamic ventilation solutions

10 Nelson Road, Lively, ON, Canada P3Y 1M3 ph: 1.705.682.0681


SOLD


Anfo Loader and Kettle Loader Kits Parts and Certifications Magnum Booms and Cranes

Innovative Underground Mine Products Blasting Supplies and Consumables: • Anti-Static Hose • Blasting Machines • Decking Plugs • Dust Control • Drilling/Borehole Plugs • Liners • Loading Plugs • Stemming Plugs • Yellow PVC Loading Bags

Kettle Loaders Sales, Rentals Parts and Service

Crane Rebuilds and Certifications

Sales, Rentals, Parts and Service

Drill Technologies

ELEMENT MINING LTD 2597 Maley Drive, Sudbury, ON Canada

Authorised Distributor

Cranes

Phone: +1 705.525.6163 Air Tuggers sales@elementminingltd.com Rentals, Sales, and Service



Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.