2 minute read

The new M2 Dual Teleskoper exemplifi es precision and flexibility: the two separate milling chambers, one equipped with Teleskoper Orbit (Ø 125 mm) and one with Ø 95 mm orbit, enable sequential wet and dry milling processes without manual in-between cleaning. Conceived as a stand-alone solution, the machine is provided with an integrated PC with touchscreen and a separate, contamination-protected tool chamber with automatic tool changer function for up to 63 tool slots.

Teleskoper Orbit (Ø 125 mm) Ø 95mm Orbit (can be upgraded to the Teleskoper Orbit)

Extra-large Teleskoper Orbit: for the elaboration of material blanks with Ø 95 mm, 98 mm, 106 mm or even 125 mm, mini zirconia blanks for single crowns as well as glass ceramic and Raw-Abutments ® blanks. Discs can be removed and reinserted later at exactly the same position with high precision in micron range – particularly useful for adjusting the friction of telescopic jobs and for the two stage production of immediate restorations in case of implant-supported prostheses (Double Milling technique) in series without in-between cleaning. The left chamber is equipped with the extra-large Teleskoper Orbit (ø 125 mm), whereas the right with a ø 95 mm orbit. The separate and contamination-protected tool chamber with tool magazine (x21) and automatic tool changer function, also offers space for up to two additional tool magazines with 21 slots each. In this way, the milling unit allows up to 63 milling burs to be tidily and safely stored. Moreover, the optical detection tool guarantees a secure tool selection, resulting in greater safety and precision. Finally, the automatic self-cleaning and dry function and the Cleaning Kit with shower and suction system always ensure a clean, ready-touse milling chamber.

Thanks to the M2/M2 Dual upgrade kit, the M2 Dual Teleskoper milling unit can be also upgraded to the M2 Dual Double Teleskoper milling unit by integrating an additional Teleskoper Orbit.

The highlight in terms of flexibility is the extra-large Teleskoper Orbit, a new extra-large orbit with a diameter of 125 mm. In combination with special interchangeable holders, material blanks with a diameter of 95, 98, 106 or even 125 mm can be processed in the same orbit. Oversized bridges, which would not fit in normal blanks, can be now easily positioned and milled. In just one milling process, bite splint production also doubles and a much larger number of crowns can be manufactured. With the new Teleskoper Orbit, by means of special holders, up to 9 glass ceramics blanks or 6 Raw-Abutments® blanks or 7 small zirconia blanks (size 1) for producing single crowns in different colours can now be milled in just one process. Moreover, blanks can be removed from the orbit and reinserted later at the same position with high precision in themicron range. This is particularly helpful for adjusting the friction of telescopic jobs or for the two-stage production of immediate restorations in case of implant-supported prostheses (with the Double Milling technique).

For info, visit www.zirkonzahn.com or call +39-0474-066-663 (in the Italian time zone).

This article is from: