Product catalogue 2015 Heating

Product catalogue 2015

Heating

All-in-one comfort for residential & commercial applications

Daikin Altherma:

at the heart of any heating solution

2

Why choose Daikin heating systems?

Thanks to our European R&D and 50 years of heat pump experience, our innovative heating technologies reduce running costs and optimise renewable energy usage.

3

Heating, domestic hot water and cooling

Sustainable & efficient energy solutions Your customer requires a new heating system ūū ūū

ust be energy efficient m must have low CO2 emissions

Your solution: Daikin ūū ūū

top seasonal efficiencies uses air-to-water and ground-to-water heat pump technology, hybrid technology or gas condensing technology

Your customer gains: ūū ūū ūū

reduced energy bill limited environmental impact optimal temperatures and comfort

Your gains: ūū ūū ūū

modular construction easy installation simple commissioning

Result: win-win for you and the customer

4

Offer your customer the benefits of a Daikin solution Advanced technologies deliver energy efficiency and cost savings 1 Ground-to-water technology: extracting heat from the ground Geothermal technology allows heat to be extracted from the ground and used to raise the temperature of the water in the system. ūū High seasonal efficiency even in colder climates, thanks to stable source temperatures.

2 Air-to-water technology: extracting heat from the outside air Using a heat pump, the system extracts heat from the outside air to raise the temperature of the water in the system ūū Guaranteed operation down to -25ºC so no winter worries ūū A solar solution can be included for pre-heating the domestic hot water.

3 Hybrid technology: a gas boiler combined with air-to-water technology Combining the latest and most efficient gascondensing boilers with our heat pump technology gives the customer the best of both worlds. ūū The most economical heating mode is chosen depending on settings selected ūū Ideal for the replacement of existing gas boilers.

4 Combustion technology: the latest and most efficient gas condensing boilers Our innovative heat exchanger will provide both space heating as domestic hot water. ūū Delivers maximum heating efficiency ūū Modulating control system results in low running costs at all times.

Optimal comfort Our solutions allow a single system to deliver heating in the winter, cooling in the summer and domestic hot water all year round and when combined with our user-friendly control system, it allows the customer to programme for perfect comfort!

Perfect for any application Daikin heating systems are the perfect solution for any application in both the residential and commercial fields, providing optimal comfort, energy efficiency and cost savings. Whether a new build or a renovation project and no matter what size of building, our systems can be tailored to provide the perfect solution.

Combines with all types of heat emitters The choice of heat emitters depends on what the customer needs in terms of comfort and aesthetics and the Daikin heating systems combine perfectly with underfloor heating, heat pump convectors and low or high temperature radiators.

5

Top energy-efficient solutions

for every application From renewable to combustion Ground-to-water technology

Air-to-water techno

Daikin Altherma ground source heat pump

Daikin Altherma low temperature split

Daikin Altherma low temperature monobloc

Different technologies

p8 Specifications: p 72

p 14 Specifications: p 73

p 26 Specifications: p 86

Different heating applications

›› Suitable for new houses and for renovations.

›› Ideal for new houses, low energy houses or together with an existing boiler (bivalent)

Installation

›› 1 indoor unit

›› 1 indoor unit ›› 1 outdoor unit

Different heat emitters

›› ›› ›› ››

Functionalities

6

Under floor heating Fan coil units Heat pump convector Low and high temperature radiators

›› Domestic hot water

›› ›› ›› ››

Under floor heating Low temperature radiators Fan coil units Heat pump convector

›› Domestic hot water ›› Cooling ›› Solar connection for hot water production

›› 1 outdoor unit

ology Daikin Altherma high temperature split

Daikin Altherma Flex Type

p 32 Specifications: p 92

p 42 Specifications: p 96

Hybrid technology

Combustion

Daikin Altherma hybrid heat pump

Gas condensing boiler

p 54 Specifications: p 100

p 64 Specifications: p 102

›› Ideal for replacement of a traditional boiler

›› Ideal for large hot water and heating requirements in ›› Apartments ›› Collective housing ›› Hotels ›› Fitness ›› Spa ›› Schools ›› Hospitals ›› Libraries

›› Ideal for replacement of a gas boiler

›› Ideal for replacement of an existing gas boiler

›› 1 indoor unit ›› 1 outdoor unit

›› Several indoor units ›› 1 or more outdoor units

›› 1 indoor unit + 1 gas condensing boiler ›› 1 outdoor unit

›› 1 indoor unit

›› High temperature radiators

›› ›› ›› ››

›› Under floor heating ›› Low and high temperature radiators

›› Under floor heating ›› Radiators

›› Domestic hot water ›› Solar connection for hot water production

›› Domestic hot water ›› Cooling (Heat recovery)

›› Domestic hot water ›› Cooling ›› Solar connection for hot water production

›› Domestic hot water

Under floor heating Low temperature radiators Fan coil units Heat pump convector

7

Ground-to-water technology

1. Daikin Altherma ground source heat pump

8

1. Daikin Altherma ground source heat pump

Why choose Daikin Altherma ground source heat pump?

Your customer requires a new heating system ūū must work in low ambient temperatures ūū must work with renewable energy sources and low environmental impact ūū low running costs Your solution: the Daikin Altherma ground source heat pump ūū provides heating and domestic hot water from renewable and free energy sources the underground ūū uses inverter heat pump technologies for higher seasonal efficiency Your customer benefits: ūū optimal comfort plus domestic hot water ūū low operating costs due to high efficiencies ūū low environmental impact Your gains: ūū thanks to a factory-fitted domestic hot water tank ūū easy installation ūū simple commissioning Result: win-win for you AND the customer 9

Ground-to-water technology

Making a difference High seasonal efficiency thanks to our inverter heat pump technology

The Daikin inverter heat pump technology has been shown to provide an increase in seasonal efficiency of up to 20% when compared to traditional on/off ground source heat pumps. ūū The brine, a water/anti-freeze mixture that operates as the heat transfer medium between the ground and the heat pump, is kept at a higher stable temperature. ūū Back up operation is reduced to a minimum ūū High compressor operating efficiencies are reached at partial load operation, i.e. when full capacity of the unit is not required.

This results in reduced running costs and a faster return on investment.return on investment.

10

1. Daikin Altherma ground source heat pump

Higher brine temperatures during continuous compressor operation, in partial load conditions

Case study Operation ON/OFF unit Partial load condition - ON/OFF

T (°C)

OFF

10 8 6 4 2 0 -2 -4 -6 -8

ON

OFF

ON

t

Typical application: • Location: Sweden • Design temperature: -17°C • Heat load: 13kW • Heating off temperature: 16°C

Outgoing Brine Temperature (HP as reference)

T (°C)

Operation Daikin unit Partial load condition - Inverter controlled

10 8 6 4 2 0 -2 -4 -6 -8

ON

t

Outgoing Brine Temperature (HP as reference)

In this typical application, when full capacity is not required the compressor works in partial load operation. Traditional on/off ground source heat pumps switch ON and OFF sequently in partial load conditions and the brine temperature decreases down to -4ºC when the unit is operating. Daikin’s inverter technology results in a stable outgoing brine temperature of around 0ºC. This increased stability in brine temperature results in a higher and more constant evaporating temperature which leads to higher operating efficiencies.

Less back up heater operation thanks to the boosting of the inverter compressor frequency

Capacity (kW)

Heat load line Traditional ON/OFF unit Daikin unit BUH* = Back-up heater

BUH*

Required heat output of your home Ambient temperature (Ta) °C

Compared to a traditional On/Off unit, the requirement for support from the back up heater is much lower for the Daikin Altherma ground source heat pump, thanks to the boosting effect of our inverter compressors, also this leads to lower running costs.

11

Ground-to-water technology

Big partial load operation at relevant ambient conditions

Case study

Typical Nordic climate application with standard heat load: • Location: Sweden • Design temperature: -17°C • Heat load: 12kW

14

80%

12

Capacity (kW)

10 8 6

Optimal operation 4 2

1

2

3 Ta

0 -16

-12

-8

-4

0

4

8

12

16

Ambient temperature (°C) Heat load line Daikin Altherma ground source heat pump - minimum capacity Daikin Altherma ground source heat pump -maximum

1 Full load operation with additional electric assistance (if required): the heat load is higher than the maximum heating capacity 2 Partial load operation: the heat load is lower than the maximum heating capacity and higher than the minimum heating capacity. This is the optimal operation zone.

The compressor will reduce its operating frequency to deliver the exact required capacities with high operating efficiencies.

3 On/Off operation: The heat load is below the minimum heating capacity, therefore the unit will go into On/Off mode to deliver the required capacity.

12

In a Nordic climate, around 80% of the required heat output has to be delivered in an ambient temperature range between -9°C and 8°C, indicated by the orange zone. To deliver a high seasonal Coefficiency of Performance (COP), it is crucial to have high operating efficiencies for this ambient temperature range as the majority of the required heat has to be delivered within this temperature range.

As you will see, thanks to its wide modulating range, the Daikin Altherma ground source heat pump almost completely covers the relevant ambient temperature range whilst in partial load operation, which it the optimal operational zone of the unit. This is, of course, a major benefit compared to traditional On/Off compressors.

1. Daikin Altherma ground source heat pump

Quick and easy installation including a domestic hot water tank To keep things simple, the domestic hot water tank is factory-fitted, thus reducing the installation time and with the pipework connections on the top of the unit it is very easy to connect.

The overall weight of the unit is reduced to facilitate ease of shipping and installation.

Compact indoor unit with pleasing design ūū The full integration of heat pump module and domestic hot water tank keeps the footprint very compact ūū High quality design helps the unit blend in with other household units ūū The footprint of the integrated unit is 728mm x 600mm - about the same as a normal household appliance - and at 1800mm high, it fits neatly in any standard room. A further benefit to both the installer and the user is that only 10mm side clearance is required and all the pipework connections are on top of the heat pump unit.

New user interface ūū Quick commissioning: the installer can program all the settings for an installation on a laptop computer and then simply upload them to the controller during commissioning. This not only reduces on-site time, but allows the installer to use a similar setting on similar installations. ūū User-friendly room thermostat functionality: the user can raise or lower water temperature as a function of the actual room temperature, resulting in a more stable room temperature and higher comfort levels. ūū Energy management functionality: the controller displays both the output and input energy of the unit allowing the user to manage their energy consumption more accurately. ūū Easy servicing: the controller records the time, date and nature of the last 20 error occurrences enabling quicker diagnostics and maintenance.

13

Air-to-water technology

2. Daikin Altherma low temperature split

14

2. Daikin Altherma low temperature split

Why choose Daikin Altherma low temperature?

Your customer requires: a new heating system ūū must work in a new build or low-energy house ūū must work with under floor heating, convectors and low temperature radiators Your solution: the Daikin Altherma low temperature ūū provides heating, domestic hot water and cooling with optional solar support ūū available in capacities from 4 to 16 kW depending on requirements ūū available as split floor standing, split wall mounted, or monobloc ūū ideal for new builds and low energy houses Your customer gains: ūū optimal comfort plus domestic hot water ūū low operating costs thanks to high efficiencies Your gains: ūū modular construction ūū flexible installation ūū simple commissioning Result: win-win for you AND the customer 15

Air-to-water technology

Daikin Altherma low temperature heat pump

the natural choice Daikin Altherma low temperature split Best seasonal efficiencies providing the highest savings on running costs. Perfect fit for new builds, as well as for low-energy houses.

1. Integrated heating and hot water unit, saving installation space and time ūū All components and connections factory-made ūū Very small installation footprint required ūū Minimum electrical input with constant availability of hot water ūū Model with integrated bi-zone kit available from spring 2015.

2. Integrated heating and hot water unit with extended flexibility ūū Solar support of domestic hot water with unpressurised (drain-back) and pressurised solar system ūū Lightweight plastic tank with exceptional hygienic benefits ūū Bivalent option: combinable with a secondary heat source ūū App control possible.

3. Wall mounted indoor unit with optional domestic hot water tank The best solution in specific situations: ūū Ideal when either no domestic hot water or more flexibility for domestic hot water is required ūū Combinable with a separate domestic hot water tank with optional solar connection.

16

Daikin Altherma low temperature monobloc A monobloc is the answer when the requirement is for a simple system relying on a single outside unit and no inside unit. ūū Everything combined in one outdoor ūū Quick and easy installation as only water pipes run indoors from the outdoor unit ūū Limited installation space required as only outdoor space is required ūū Freeze protection of hydraulic parts.

17

Air-to-water technology

Daikin Altherma low temperature split

Daikin is renowned for its know-how related to frost protection on its heat pump range.

The outdoor units are specifically designed to avoid ice build-up problems, even in the most severe winter conditions.

ūū The discharge grill is also specifically designed to avoid ice accumulation.

Daikin Altherma low temperature has a guaranteed operation down to an outside temperature of -25°C. This ensures sufficient heat pump operation for even the coldest climates.

ūū Hot gas pass: hot gaseous refrigerant coming from the compressor runs through the bottom plate to keep the base free of ice and all the drain holes open. ūū Sub-cool pass: before the refrigerant pipe is split by the distributor to the hairpins, the refrigerant passes through the bottom of the coil to keep this lower part free of ice.

1. The 4-8kW range of Daikin Altherma has a specifically designed casing to avoid the risk of ice formation on the outdoor unit coil. ūū The outdoor unit has a free hanging coil, ensuring no ice accumulates in the lower part of the outdoor unit. This is key to offering appropriate frost protection and has the additional advantage that no electrical bottom plate heater is required.

18

Guaranteed operation: Daikin Altherma is suitable for all climates, even withstanding severe winter conditions

2. The 11-16kW range of Daikin Altherma (ERLQ-C) has specific frost protection.

2. Daikin Altherma low temperature split

Free hanging coil

Hot gas pipe

Our advanced protection against frost and icing means that we can offer the Daikin Altherma across the whole of Europe.

Distributor New discharge grille

Sealing Sub-cool pass Only a small capacity bottom plate heater is installed (35W) on the ERLQ011,014,016C range, with smart operation logic only operating during defrost cycles.

This saves around 90% of electricity consumption compared to a thermostatically controlled bottom plate heater.

19

Air-to-water technology

Integrated floor standing unit, saving installation space and time ūū The stainless steel domestic hot water tank is included in the unit, with all connections between the heat pump module and tank factory mounted.

This allows for a fast installation compared to a traditional set-up (wall-mounted with separate domestic hot water tank) with only water and refrigerant pipes to be connected. ūū All hydraulic components are included (circulating pump, expansion vessel, back-up heater, etc.

No need to look for third party components. ūū The electric PCB board and hydraulic components are accessible from the front. This ensures easy serviceability and avoids the risk of any damage to electrical components due to water leakages. ūū All water and refrigerant connections are at the top of the unit, assuring easy connection and accessibility. This means no connections are required at the back of the unit, resulting in a lower installation footprint.

20

Components are accessible from the front

2. Daikin Altherma low temperature split

Thanks to the all-in-one design, the installation space is minimised both in terms of footprint and height

1

Compared to the traditional split-up version for a wall-mounted indoor unit and separate domestic hot water tank, the integrated indoor unit greatly reduces the installation space required.

Traditional set-up

Integrated indoor unit

Hydrobox

DHW tank

VS

580 mm

X

1732 mm

Space reduced by more than 30%

370 mm 72 8m m

950 mm + X

2 728 mm

3 600 mm + 10 mm clearance on both sides

4

m 600 m

Smaller footprint: with a width of only 600 mm and a depth of 728 mm, the integrated indoor unit has a similar footprint compared to other household appliances. For installation, almost no side clearances are required, and no space is required behind the unit for the piping, as the piping connections are at the top.This results in an installation footprint of only 0.45 m².

Low installation height: both the 180l and 260l version come with a height of 173 cm. The required installation hight is less than 2 m.

The compactness of the integrated indoor unit is emphasised by its sleek design and modern look, easily fitting with other household appliances.

21

Air-to-water technology

Integrated solar unit, maximising renewable energy and offering top comfort Solar support of domestic hot water with unpressurised (drain-back) or pressurised solar system

The graphic shows when and how much the solar system supports the heating and hot water generation.

The integrated solar unit uses free energy from the sun to support the production of domestic hot water.

At its peak, 80% of solar energy can be converted into usable heat, made possible by the extremely high efficiency of our flat solar panels. Solar energy and heat pumps complement each other ideally in this application. The heat pump adds the required amount of heat to the system to meet demand.

Combined with a heat pump, which also exploits regenerative ambient energy, the use of ancillary energy is reduced to an absolute minimum.

Solar energy utisisation for hot water and heating Heat pump (environmental heat) Auxiliary energy

kWh 3.000 2.500 2.000 1.500 1.000 500

Jan

Feb

Mar

Apr

May

Depending on your customer’s needs, an unpressurised or pressurised system can be offered.

Unpressurised solar system (with EHSH(X)-A) The solar collectors are only filled with water when sufficient heat is provided by the sun. In this case, both pumps in the control and pump unit switch on briefly and fill the collectors with storage tank water.

After filling, which takes less than a minute, one of the pumps switches off and water circulation is maintained by the remaining pump.

If there is insufficient sunshine or if the solar storage tank does not need more heat, the feed pump switches off and the entire solar system drains into the storage tank. The addition of antifreeze is not necessary since, if the installation is not in use, the collector surfaces are not filled with water.

Another environmental advantage!

22

Jun

Jul

Aug

Sep

Oct

Nov

Pressurised solar system (with EHSH(X)B-A) If needed, a pressurised thermal hot water system can also be offered. The system is filled with heat transfer fluid containing the correct amount of antifreeze to avoid freezing in winter.

The whole system is pressurised and sealed.

ON

ON

Unpressurised

Pressurised

solar system

solar system

Dec

2. Daikin Altherma low temperature split

Lightweight plastic tank with exceptional hygienic benefits The integrated domestic hot water tank is waterhygienic and is state of- the-art technology.

Thanks to the flow-through principle, legionella bacteria cannot grow, thus eliminating the need for a thermal disinfection cycle. Its exceptional water hygiene benefits have been confirmed in an extensive study by the Hygiene Institute at the University of T端bingen.

Bivalent option: combinable with a secondary heat source (EHSH(X)B-A only)

Heat from other sources can also be efficiently stored in the indoor unit. A solar system can also be supported by oil-fired and gas-fired boilers, pelletfired boilers or wood-fired stoves with back boilers for heating and hot water generation. If you are not installing a solar system from the beginning, it can be fitted quickly and easily at any time afterwards.

App control possible 1. Control with the app Simple consistent handling with intuitive menu navigation and control can be carried out via your smartphone with the app. available from beginning of 2014.

2. Clear display and easy modification The display shows values and parameters in clear text. All operating modes, timer programmes and operating parameters can be set and modified quickly.

3. Simple controller for easy regulation The water temperature for the heating is regulated in accordance with the outdoor temperature. The controller automatically detects winter and summer, and switches the heating mode on and off to suit the demand. The controller is easy and intuitive to operate and can be extended by the use of a room controller, which can be used conveniently to control and monitor the heating system.

23

Wall mounted unit, offering flexibility for installation and domestic hot water connection The wall-mounted indoor unit 1. When no domestic hot water is required in combination with the Daikin Altherma system ūū All hydraulic components are included in the heat pump unit (circulating pump, expansion vessel, back-up heater, etc), no need to look for third-party components ūū All hydraulic components and the PCB board, are accessible from the front for easy serviceability ūū Compact unit: 890 mm (height) x 480 mm (width) x 344 mm (depth) ūū Small installation space as almost no side clearances are required ūū Modern outlook easily fits in with other modern household appliances.

2. T he wall-mounted indoor unit can be combined with a separate domestic hot water tank ūū EKHWS stainless steel tank: 150l, 200l or 300l ūū EKHWE enameled tank: 150l, 200l or 300l.

24

3. When solar connection for hot water is required: Averaged over an entire year, the sun delivers half of the energy we need to bring our domestic hot water up to the desired temperature. High efficiency collectors with highly selective coating transfer all the short-wave solar radiation into heat.

The collectors can be mounted on virtually any kind of roof.

Pressurised solar system ūū System is filled with heat transfer fluid with the correct amount of antifreeze to avoid freezing in winter. ūū System is pressurised and sealed. ūū A solar kit and solar pump station will be needed to connect the domestic hot water tank (EKHWS or EKHWE) to the solar collector.

Unpressurised solar system ūū The solar collectors are only filled with water ūū Heat is provided by the sun. ūū Both pumps switch on briefly and fill the collectors with storage tank water. ūū After filling, water circulation is maintained by the remaining pump.

25

Air-to-water technology

Daikin Altherma low temperature monobloc Why choose a monobloc system? 큰큰 No indoor space required for the heating system 큰큰 Quick installation: only water pipes run indoors from the outdoor unit as all hydraulic parts are located within the outdoor unit.

26

2. Daikin Altherma low temperature split

Outdoor unit only Extra small casing

Daikin Altherma monobloc is available in the following versions: ūū heating only or heating and cooling ūū with or without bottom plate heater ūū single phase or three phase ūū 6kW, 8kW, 11kW, 14kW or 16kW. Back-up heater: optional in line 6 kW for 6-8 kW models. Standard built in for 11-14-16 kW models.

Daikin Altherma small capacity models (6 to 8 kW) are equipped with a swing compressor.

Swing compressors have been setting trends in the area of energy efficient performance for the past 10 years (leaks and friction are basically non-existent) in thousands of outdoor units.

6kW and 8kW casing

The scroll compressors provided in the Daikin Altherma monobloc models (11 to 16 kW) are designed as compact, robust, low-noise device to guarantee optimal operational reliability (no valves and built-in swing-link coupling) and efficiency (through a low initial flow and a constant compression ratio). A technology already used in many Daikin heat pumps.

H2O piping, No refrigerant piping Freeze protection of hydraulic parts In order to protect the water pipes from freezing up during winter, insulation is provided for all hydraulic components and special software has been applied to activate the pump and back-up heater if necessary.

This prevents the water temperature from dropping below freezing point and obviates the need for the addition of glycol to the water pipes.

11kW, 14kW and 16kW casing

27

Air-to-water technology

Domestic hot water tank and solar support Whether your customer wants domestic hot water only or the advantage of solar energy, Daikin offers you the domestic hot water tank that meets his or her requirements.

EKHWS / EKHWE Domestic hot water tank ūū Available in 150,200 and 300l ūū Stainless steel (EKHWS) or enameled (EKHWE).

Pressurised solar system Averaged over an entire year, the sun delivers half of the energy we need to bring our domestic hot water up to the desired temperature. High efficiency collectors with highly selective coating transfer all the short-wave solar radiation into heat.

The collectors can be mounted on roof tiles.

If needed, a pressurised thermal hot water system can also be offered. The system is filled with heat transfer fluid with the correct amount of antifreeze to avoid freezing in winter. The whole system is pressurised and sealed. A solar kit and solar pump station will be needed to connect the domestic hot water tank (EKHWS or EKHWE) to the solar collector.

28

EKHWP Domestic hot water tank with unpressurised solar support ūū Available in 2 capacities: 300 and 500 litres -- Can be combined with unpressurised solar system -- Optimised connections ūū Easier installation of each system circuit -- Improved design: attractive colour and new form -- Optimised for easy transport and installation -- Better insulation means reduced energy costs -- Higher flow-rate thanks to optimised connection technology -- Clear connections mean easier installation.

Unpressurised solar system The solar collectors are only filled with water when sufficient heat is provided by the sun. In this case, both pumps in the control and pump unit switch on briefly and fill the collectors with storage tank water.

After filling, which takes less than a minute, one of the pumps switches off and water circulation is maintained by the remaining pump.

If there is insufficient sunshine or if the solar storage tank does not need more heat, the feed pump switches off and the entire solar system drains into the storage tank. The addition of antifreeze is not necessary since, if the installation is not in use, the collector surfaces are not filled with water – another environmental advantage!

2. Daikin Altherma low temperature split

Easy control System controller for Daikin Altherma low temperature split

Graphical screen with backlight

In case something goes wrong, full-text error messages will guide the end-user to take appropriate action to try and resolve the problem. If the problem persists and a site intervention is necessary, the service engineer will be able to review the last 20 error occurrences. Detailed information on the operational conditions of the unit, such as the running hours of the different elements, operating temperatures or number of starts, can easily be read out from the extended end-user’s menu.

On/Off

Info

Confirm Menu back Navigational buttons

Home

System controller for Daikin Altherma low temperature monobloc The leaving water temperature is dependant on the outside ambient temperature thanks to the floating setpoint functionality. At low outside ambient temperatures, the leaving water temperature will increase to satisfy the increasing heating requirement of the building and vice versa.

Optional room thermostat The user can easily navigate between the different menus, the most common of which include: The thermostat measures the room temperature and communicates directly to the user interface.

The LCD screen of the room thermostat indicates all the necessary information regarding the setting of the Daikin Altherma system in the blink of an eye.

An external sensor (EKRTETS) can be placed between the under floor heating and the floor, as an option to the wireless room thermostat.

ūū Setting the temperature of the room based on measurements from the built-in or external sensor ūū Off function (with integrated frost-protection function) ūū Holiday function mode ūū Comfort and reduced function modes ūū Time (day and month) ūū Programmable week-timer with 2 user defined and 5 pre-set programmes, with up to 12 actions per day ūū Keylock function ūū Setting limits. The installer can change the upper and lower limits ūū Floor temperature protection.* * only in combination with EKRTETS

Home automation

tekst moet hier onderaan blijven staan:

The Daikin RTD-LT/CA accessory allows your customers to control their Daikin Altherma low temperature heat pump via their home automation system.

The user can easily navigate between the different menus, the most common of which include:

Light

RTD-LT/CA Daikin Altherma system

Shutter control Home automation TV

29

Air-to-water technology

Heat pump convector The latest in heat pump convector technology for high performance The Daikin heat pump convector is specifically designed to offer optimal efficiencies and comfort for residential applications. ūū Small dimensions compared to low temperature radiators ūū Low sound level, optimal for bedroom applications (down to 19 dBA) ūū High-capacity cooling with water temperatures down to 6°C.

2000mm

Standard low temperature radiator Daikin heat pump convector

600mm 600mm

700mm

30

31

Air-to-water technology

3. Daikin Altherma high temperature split

32

3. Daikin Altherma high temperature split

Why choose Daikin Altherma high temperature?

Your customer requires a new heating system ūū must work with existing high temperature radiators ūū must replace the existing boiler Your solution: the Daikin Altherma high temperature ūū provides heating and domestic hot water with optional solar support ūū available in capacities from 11 to 16 kW depending on requirements ūū works with existing high temperature radiators up to 80°C without additional back-up heater Your customer gains: ūū optimal comfort plus domestic hot water ūū low operating costs due to high efficiencies Your gains: ūū reduced installation time as a result of not having to replace radiators and piping ūū simple commissioning Result: win-win for you AND the customer

33

Air-to-water technology

For replacement of oil boilers

Daikin Altherma high temperature system offers heating and domestic hot water for your home.

This system can perfectly replace a tradional boiler and connect to the existing piping.

Daikin Altherma high temperature is therefore the ideal solution for renovations. The split system consists of an outdoor unit and an indoor unit and can be completed with solar connection.

ūū Low running costs and optimum comfort at even the coldest outdoor temperatures, thanks to the unique cascade compressor approach ūū No need to change your existing radiators and piping as water temperatures can be increased up to 80°C for heating and domestic hot water use ūū Only limited installation space needed as the indoor unit and domestic hot water tank can be stacked on each other.

A Indoor unit B Outdoor unit C Domestic hot water tank

C

B

34

A

B Outdoor unit C Domestic hot water tank

Split system A split system consists of an outdoor unit and an indoor unit The Daikin Altherma outdoor unit includes a heat pump that extracts heat from the outside air resulting in nearly 2/3 of all usable heat coming from a sustainable and free source.

The outdoor unit extracts heat from the ambient outdoor air. This heat is transferred to the indoor unit via refrigerant piping.

The indoor unit receives the heat from the outdoor unit and further increases the temperature, allowing water temperatures up to 80°C for heating through radiators and for domestic hot water use. Daikin’s unique cascade compressor approach to the heat pumps (one in the outdoor unit/one in the indoor

unit) means optimum comfort at even the coldest outdoor temperatures, without the need for an electric back-up heater. Available capacities are 11, 14 and 16 kW. If a greater heating capacity than 16 kW is required, you can now combine several indoor units with one single outdoor unit to give up to 40 kW of heating.

Daikin Altherma high temperature heats up to 3 times more efficiently than a traditional heating system based on fossil fuels or electricity. A lower running cost is thus achieved, while you can still enjoy a stable and pleasant level of comfort.

Accessories for high temperature applications User interface

Solar connection

With Daikin Altherma’s user interface, the ideal temperature can be easily, quickly and conveniently regulated. It allows for more precise measurement and can regulate your comfort even more optimally and energy efficiently.

The Daikin Altherma high temperature heating system can optionally use solar energy for hot water production.

If the solar energy is not required immediately, the purpose-built hot water tank (EKHWP) can store large quantities of heated water for up to a day for later use as domestic hot water or for heating.

Heat emitters The Daikin Atherma high temperature system is designed to work with high-temperature radiators, which come in various sizes and formats to suit the interior design as well as the heating requirement.

The radiators can be individually controlled or they can be regulated by the central heating control programme.

35

Air-to-water technology

Outdoor unit and indoor unit Outdoor unit Daikin Altherma high temperature uses 100% thermo-dynamic energy to obtain water temperatures up to 80°C without using an additional heater.

Inverter control means even more savings!

The inverter constantly adapts your system to actual heating demand. No need to fiddle with settings: the programmed temperature is optimally maintained regardless of outdoor and indoor factors such as the amount of sunlight, the number of people in the room, etc. This results in unmatched comfort, prolonged system life since it’s only in operation when needed, and 30% additional savings in energy costs compared to non-inverter heat pumps.

Heating operation: With inverter technology

Without inverter technology

Daikin Altherma cascade technology High performance in 3 steps:

1

36

The outdoor unit extracts heat from the ambient outdoor air.

This heat is transferred to the indoor unit via R-410A refrigerant.

Step

1

Outdoor

3. Daikin Altherma high temperature split

Indoor unit ūū Available in heating only applications ūū No back-up heater required thanks to cascade technology

5

6

2 1

3 7

4

1.

2.

3.

4.

5.

6.

7.

Heat exchanger R-134a H2O Heat exchanger R-410A R-134a Pump ( DC-inverter to maintain fixed ∆T) Compressor R-134a Air purge Manometer Expansion vessel (12l)

Indoor Step

2

Step

3

2 3

The indoor unit receives the heat and further increases the temperature with R-134a refrigerant.

The heat is transferred from the R-134a refrigerant circuit to the water circuit. Thanks to the unique cascade compressor approach, water temperatures of 80° C can be reached without using an additional back-up heater.

37

Air-to-water technology

Domestic hot water tank

Whether your customer wants domestic hot water only or the advantage of solar energy, Daikin offers you the domestic hot water tank that meets his or her requirements.

or

The indoor unit and domestic hot water tank can be stacked to save space, or installed next to each other, if only limited height is available.

Non-stacked

EKHTS: Domestic hot water tank

Stacked

13

12 6

ūū Available in 200 and 260 litres ūū Efficient temperature heat-up: from 10°C to 50°C in only 60 minutes* ūū Heat loss is reduced to a minimum thanks to the high quality insulation ūū At necessary intervals, the indoor unit can heat up the water to 60°C to prevent the risk of bacteria growth.

8 11 14 2 3 4 15 7 9

5 1 10

7

1

* Test done with a 16kW outdoor unit at ambient temperature of 7°C, 200L tank

5

9

10

1. Hot water connection 2. T-piece (field supply) 3. Pressure relief valve connection

13

12

4. Pressure relief valve

6

(field supply) 5. Recirculation hole

8

6. Thermistor socket

11

7. Flow inlet connection 8. Heat exchanger coil 9. Return outlet connection

14 2

10. Cold water connection

3 4

11. Thermistor 12. Anode 13. Knockout holes 14. Knockout holes

38

15 7 9

5 1 10

7

1

3. Daikin Altherma high temperature split

Solar connection Solar collector

Indoor unit and domestic hot water tank

Solar collectors

EKHWP: domestic hot water tank

Averaged over an entire year, the sun delivers half of the energy we need to bring our domestic hot water up to the desired temperature. High-efficiency collectors with highly selective coating transfer all the short-wave solar radiation into heat.

The collectors can be mounted on roof tiles.

The domestic hot water tank has two sections: The upper, always hot, section – the active water zone – and the lower, colder section – the solar zone.

The active water is heated in the upper section of the storage tank. The high temperature of this zone ensures that sufficient hot water is always available.

Unpressurised solar system The solar collectors are only filled with water when sufficient heat is provided by the sun. In this case, both pumps in the control and pump unit switch on briefly and fill the collectors with storage tank water.

After filling, which takes less than a minute, one of the pumps switches off and water circulation is maintained by the remaining pump.

Solar collectors work more efficiently when colder water flows through them. Therefore, the water that is fed directly to the solar collectors in solar operation is stored in the solar zone.

If there is insufficient sunshine or if the solar storage tank does not need more heat, the feed pump switches off and the entire Solar System drains into the storage tank. The addition of antifreeze is not necessary since, if the installation is not in use, the collector surfaces are not filled with water – another environmental advantage!

39

Air-to-water technology

Easy control System controller The user interface controls the high temperature heating system in two ways:

1/ Weather dependant floating set point When the floating set point functionality is enabled, the set point for the leaving water temperature will be dependant on the outside ambient temperature.

At low outside ambient temperatures, the leaving water temperature will increase to satisfy the increasing heating requirement of the building.

At warmer temperatures the leaving water temperature will decrease to save energy.

2/ Thermostat control With Daikin Altherma’s user interface with integrated temperature sensor, the ideal temperature can be easily, quickly and conveniently regulated.

The easy-to-control user interface for high temperature applications guarantees your comfort: ūū Space heating ūū Quiet mode ūū Setback function ūū Disinfection function

ūū Off function ūū Time scheduler ūū Domestic water heating mode

Optional room thermostat The thermostat measures the room temperature and communicates directly to the user interface.

The LCD screen of the room thermostat indicates all the necessary information regarding the setting of the Daikin Altherma system in the blink of an eye.

The user can easily navigate between the different menus, the most common of which include: ūū Setting the temperature of the room based on measurements from the built-in or external sensor ūū Off function (with integrated frost-protection function) ūū Holiday function mode ūū Comfort and reduced function modes ūū Time (day and month) ūū Programmable week-timer with 2 user defined and 5 pre-set programmes, with up to 12 actions per day ūū Keylock function ūū Setting limits. The installer can change the upper and lower limits ūū Floor temperature protection. * * only in combination with EKRTETS

40

41

Air-to-water technology

4. Daikin Altherma Flex Type

42

4. Daikin Altherma Flex Type

Why choose Daikin Altherma Flex Type?

Your customer requires: a new heating system ūū must work in a large building and in complex spaces such as apartments, spas, hotels and restaurants ūū must provide heating, cooling and large volumes of domestic hot water ūū each apartment or space must have individual control Your solution: the Daikin Altherma Flex Type ūū provides heating, domestic hot water and cooling for large volumes ūū uses heat recovery technology to deliver efficient cooling ūū capable of being expanded by adding outdoor units and additional indoor units Your customer benefits: ūū ease of maintenance ūū low operating costs due to high efficiencies ūū satisfied users Your gains: ūū modular construction ūū one flexible system for several solutions Result: win-win for you AND the customer

43

Air-to-water technology

Daikin Altherma Flex Type for large residential and commercial applications Heat emitters

Modular system

All types of heat emitters can be connected thanks to its wide water temperature range (up to 80째C) and its ability to work with multiple set points, allowing a combination of different heat emitters operating at different water temperatures.

One or more outdoor units can be connected to several indoor units (maximum 10 indoor units per outdoor unit).

Advanced control and monitoring To further increase the efficiency, an RTD-W per indoor unit and a sequencing controller for the full heating system can be installed to monitor the exact heating demand.

1 Heating 2 Cooling 3 Hot water

44

4. Daikin Altherma Flex Type

Apartment buildings & collective housing Daikin Altherma Flex Type is designed with the particular challenge of apartment building and collective housing in mind.

High efficiency is ensured by the combination of technologies with low operating costs as a result.

Next to central control, the latest integrated control technologies also allow the temperature of each residential space to be individually regulated and maintained.

Hotels Daikin Altherma Flex Type offers reliable solutions for hotel applications. The system efficiently generates hot water in both heating and cooling modes. Thanks to the heat recovery technology the rooms are cooled in the most efficient way.

Restaurants Highly efficient production of large hot water volume also makes the system a perfect solution for restaurants. With its very low environmental impact the system represents a perfect green energy solution.

Spas and leisure All types of hot water applications Daikin Altherma Flex Type easily provides heating and cooling to a large number of rooms of varying sizes, while at the same time large volumes of hot water are also needed. Advanced control and monitoring assure highly efficient operation. Furthermore only limited installation space is required.

45

Air-to-water technology

Two Daikin technologies combined Outdoor unit: Daikin VRV technology Modular flexibility

Heat recovery

The Daikin Altherma Flex type makes use of Daikin’s renowned VRV technology. Multiple indoor units can be connected to a single outdoor unit.

A combination of Proportional Integral Derivative controlled compressors and electronic expansion valves in the outdoor unit continuously adjust the circulating refrigerant volume in response to load variations in the indoor units connected to it.

This allows the indoor units to operate independently of each other, assuring total flexibility.

Heat absorbed while cooling one apartment can be recovered instead of being simply released into the air.

Each apartment retains control of its own heating, hot water and cooling.

This recovered heat can be used ūū for domestic hot water production in the same apartment ūū for space heating and domestic hot water production in other apartments Maximum use is made of available energy, thus reducing electricity costs.

Inverter compressors Daikin Altherma Flex Type owes its remarkable low energy consumption to a unique combination of highly efficient inverter-controlled Daikin compressors with a variable operating point. This allows capacity to be exactly matched to the actual heating demand of the building. The ability to optimally control the heat capacity of the outdoor unit also means maximum comfort and minimum energy consumption.

Cooling: up to 43°C

Domestic hot water heating: up to 75°C discharge

liquid

R-410A

Heating: up to 80°C R-134A

Cooling: down to 5°C

suction R-410A H2O

46

4. Daikin Altherma Flex Type

Indoor unit: Daikin Altherma cascade technology The Daikin Cascade technology uses an outdoor unit that extracts heat from the surrounding air and transfers this to the indoor unit via a R-410A refrigerant circuit. The indoor unit then increases this heat via the R-134a refrigerant circuit and it is then used to heat the water circuit.

Using the unique cascade compressor approach, water temperatures of 80º C can be achieved without additional back-up heaters.

Space heating Daikin Altherma Flex Type makes use of the cascade technology to improve the efficiency of the spacing heating supplied because it has a number of significant advantages over single refrigerant heat pumps: ūū it provides for a wide range of water temperatures (25º - 80ºC) which enables all types of heat emitters to be connected including under floor heating, convectors and radiators and it is compatible with existing radiator systems ūū there is no drop in capacity with increasing water temperatures ūū it delivers high capacities at low ambient temperatures right down to -20ºC ūū No back-up electrical heater is required.

Domestic hot water heating The cascade technology also delivers water temperatures of 75°C that can be used to heat up the domestic hot water tank, which makes it highly efficient for the production of domestic hot water. ūū Domestic hot water can be produced up to 75° C, without the assistance of an electric heater ūū No electric heater required for Legionella disinfection ūū COP of 3.0 for heating from 15° C to 60° C ūū Heat-up time from 15° to 60° C in 70 minutes (200L tank) ūū Equivalent hot water volume of 320L at 40°C (without reheat) for a 200L tank at a tank temperature of 60°C. Higher volumes of equivalent hot water are available with the 260l tank, or using a higher tank temperature.

Cooling The second refrigerant cycle R-134a can be bypassed to offer efficient cooling. The R-410A refrigerant cycle is reversed, and the cool water circuit can be used to cool the rooms. ūū High cooling capacities with water temperatures down to 5°C, in combination with Daikin heat pump convector or Daikin fan coil units ūū Under floor cooling is possible, with water temperatures down to 18° C ūū Heat from cooling operation can be recovered to heat the domestic hot water tank.

Cascade technology Step

Heat from ambient outdoor air is extracted

1

Step

2

Transferring heat

Outdoor

Step

increasing temperature

3 Heat is then transferred to the water circuit

Indoor

47

1d. Daikin Altherma Flex Type

13

12

Domestic hot water tank

6 8 11 14 2 3 4 15 7 9

5 1 10

7

1

5

9

10

or

Stacked Non-stacked

The indoor unit and domestic hot water tank can be stacked to save space, or installed next to each other, if only limited height is available.

1. Hot water connection 2. T-piece (field supply) 3. Pressure relief valve connection 4. Pressure relief valve

EKHTS: Domestic hot water tank ūū Available in 200 and 260 litres ūū Efficient temperature heat-up: from 10°C to 50°C in only 60 minutes* ūū Heat loss is reduced to a minimum thanks to the high quality insulation ūū At necessary intervals, the indoor unit can heat up the water to 60°C to prevent the risk of bacteria growth.

13

12

(field supply)

6

5. Recirculation hole 6. Thermistor socket

8

7. Flow inlet connection

11

8. Heat exchanger coil 9. Return outlet connection 10. Cold water connection

14 2

11. Thermistor 12. Anode

3 4

13. Knockout holes 14. Knockout holes

15 7 9

5 1 10

7

1

* Test done with a 16kW outdoor unit at ambient temperature of 7°C, 200L tank

48

4. Daikin Altherma Flex Type

Easy control

System controller

2/ Thermostat control

The user interface controls the high temperature heating system in two ways:

With Daikin Altherma’s user interface with integrated temperature sensor, the ideal temperature can be easily, quickly and conveniently regulated.

The easy-to-control user interface for high temperature applications guarantees your comfort:

1/ Weather dependant floating set point When the floating set point functionality is enabled, the set point for the leaving water temperature will be dependant on the outside ambient temperature. At low outside ambient temperatures, the leaving water temperature will increase to satisfy the increasing heating requirement of the building.

At warmer temperatures the leaving water temperature will decrease to save energy.

ūū Space heating ūū Quiet mode ūū Setback function ūū Disinfection function

ūū Off function ūū Time scheduler ūū Domestic water heating mode

Optional room thermostat The user can easily navigate between the different menus, the most common of which include: The thermostat measures the room temperature and communicates directly to the user interface.

The LCD screen of the room thermostat indicates all the necessary information regarding the setting of the Daikin Altherma system in the blink of an eye.

An external sensor (EKRTETS) can be placed between the under floor heating and the floor, as an option to the wireless room thermostat.

Tekst moet hier onderaan blijven staan: The user can easily navigate between the different menus, the most common of which include:

ūū Setting the temperature of the room based on measurements from the built-in or external sensor ūū Cooling and heating mode ūū Off function (with integrated frost-protection function) ūū Holiday function mode ūū Comfort and reduced function modes ūū Time (day and month) ūū Programmable week-timer with 2 user defined and 5 pre-set programmes, with up to 12 actions per day ūū Keylock function ūū Setting limits. The installer can change the upper and lower limits ūū Floor temperature protection and protection against condensation for underfloor cooling. *

* only in combination with EKRTETS

49

Air-to-water technology

Advanced control and monitoring for high efficiency and ease of operation To further increase the efficiency, an RTD-W per indoor unit and a sequencing controller for the full heating system can be installed to monitor the exact heating demand.

LWTS

RTD

BMS

RTD

RTD

RTD

RTD

Sequencing controller

Central control thanks to RTD-W interface Daikin’s RTD control systems allow the company’s entire product portfolio to be integrated fully with other building systems. Designed for a wide range of applications, their pre-programmed functions ensure systems are highly efficient, delivering reduced energy consumption and carbon emissions, while maintaining excellent levels of comfort.

Whatever the application, Daikin’s RTD controls mean all systems can be controlled centrally, helping owners, building managers, operators and home owners to reduce energy consumption (and bills), as well as lowering carbon emissions.

The RTD-W control uses dry-contacts, 0-10V signal and Modbus interface to monitor, control and integrate domestic and commercial hot water and heating systems.

50

Sequencing controller Thanks to the Modbus interface of the RTD-W, the sequencing controller (EKCC8-W) can centrally monitor the whole heating system.

The sequencing controller transfers centralised settings and control through Modbus to the units: ūū weather dependent leaving water set point and schedule ūū domestic hot water set point and schedule ūū quiet mode schedule A centralised overview of the operating conditions of all units is shown on one screen, including error history.

A main energy reducing function is the cascade operation of units. The number of operating indoor units is defined based on the difference between measured common leaving water temperature and the set point. The order of start-up of the units is determined by running hours, domestic hot water operation and grouped per outdoor unit.

In case of capacity shortage and unit alarm, the back-up heater operation is enabled by the sequencing controller.

The advanced monitoring of the heating system ensures the building owner a low energy bill and a clear view on the operation of the system.

The installer has a clear view on the error history if intervention is needed.

51

Air-to-water technology

Heat pump convector The Daikin heat pump convector operates at typical water temperatures of 45°C, which can be efficiently produced thanks to the Daikin Altherma cascade technology.

The heat pump convector is therefore the ideal heat emitter for apartment applications, providing high comfort levels:

ūū Low sound level down to 19 dB(A), optimal for bedroom applications ūū High-capacity cooling with water temperatures down to 6° C

Small dimensions compared to low-temperature radiators: width is reduced with 2/3rd 2000mm

Standard low temperature radiator Daikin heat pump convector

600mm 600mm

700mm

Control Infrared remote control (Standard) ARC452A15

52

Each Daikin heat pump convector has its own control and every room can be independently heated (or cooled) as required. The remote control has a built-in weekly timer for optimum flexibility and comfort. Operation of the unit can be adapted to individual requirements.

4. Daikin Altherma Flex Type

Heating / Cooling operation Heating (45°C) / Cooling (6°C)

living room

bedroom 1

bedroom 2

45°C / 7°C

All types of heat emitters can be connected to Daikin Altherma for apartment buildings and collective housing, thanks to its wide water temperature range and its ability to work with multiple set points, allowing a combination of different heat emitters operating at different water temperatures. The set point of the indoor unit is a function of the actual demand of the various heat emitters, ensuring optimum efficiency at all times and under all conditions.

ZONE 1: TLw = 65°C

balancing vessel

pump radiators

living room

65°C

bathroom

Valves closed in cooling mode

ZONE 2: TLw = 45°C

bedroom

external control 45°C pump heat pump convectors mixing valve

Heat demand on/off living room

Off

On

Off

Off

bathroom

Off

Off/on

On

Off

bedroom

Off

Off/on

Off/on

On

Indoor unit

Off

65°C

65°C

45°C

53

Hybrid technology

5. Daikin Altherma hybrid heat pump

54

5. Daikin Altherma hybrid heat pump

Why choose Daikin Altherma hybrid heat pump?

What your customer wants: ūū more energy efficient systems ūū more cost effective systems Your solution: choose a Daikin Altherma hybrid heat pump ūū combination of gas condensing technologies and air-to-water heat pumps ūū delivers up to 35% more heating efficiency ūū optimises the operation of the most efficient gas condensing boilers Your customer benefits: ūū low running costs for heating and domestic hot water ūū low investment costs ūū ideal for renovation applications Your gains: ūū modular construction ūū Easy and fast installation Result: win-win for you AND the customer 55

56

5. Daikin Altherma hybrid heat pump

An opportunity in residential heating !

What is condensing boiler technology?

What is an air-to-water heat pump?

Condensing boiler technology converts the fuel used into usable heat, virtually without loss. This is both good for the environment and your wallet, since lower energy consumption means lower heating costs, less use of energy resources and a reduction in CO2 emissions. During this process, flue gases are cooled to the extent that the steam they contain is condensed.

The energy that is released by this process, is used as heating energy.

The Daikin Altherma air-to-water heat pump is a sustainable energy source: extracting heat from the outside air. In a closed loop containing a refrigerant, a thermodynamic cycle is created through evaporation, condensation, compression and expansion. This ‘pumps’ heat from a lower to a higher temperature level.

Air

+

Gas

The heat gained is transferred to your home’s central heating distribution system.

Hybrid Heating & hot water

57

2. Dakin Altherma hybrid heat pump

Looking at an average European climate, the largest part of the required heat output is covered by the hybrid and heat pump operation, resulting in up to 35% more heating efficiency.

Low running costs for heating and domestic hot water compared to traditional boilers

A. Space heating Most economical mode ūūheat pump only ūūhybrid mode ūūgas only

Energy prices & Efficiency Depending on the outdoor temperature, energy prices and the internal heat load, the Daikin Altherma hybrid heat pump smartly chooses between the heat pump and/or the gas boiler, possibly in simultaneous operation, always selecting the most economical mode to operate.

58

5. Daikin Altherma hybrid heat pump Illustration of an average European climate Required heat output kWh/°C

1800 1600 1400 1200 1000 800 600 400 200 0

ūū Heat load: 14 kW ūū 70% heat pump output ūū 30% gas boiler output

Gas operation

Hybrid operation

Heat pump operation

Ambient temperature °C

-7 0

15

+ 35% efficiency (space heating) compared to condensing boiler Heat load = the capacity of the space heating system required to maintain comfortable indoor temperatures at any time.

Required heat output = heat load x n° of occuring hours per year

Heat pump operation

the temperature of the water flowing from the radiators to the heat pump and so maximizing the heat pump efficiency.

The exact time the switch-over is made from heat pump operation to hybrid opertion depends on the house characteristics, energy prices, the requested indoor temperature setting and the outdoor temperature.

The heat pump integrated in the Daikin Altherma hybrid heat pump is the best available technology for optimizing running costs at moderate outdoor temperatures, resulting in a coefficient of performance of 5.041 !

Hybrid operation If a high heat load is required, or to achieve the highest efficiencies at the current conditions, both the gas boiler and heat pump operate at the same time in the most economical way.

The water flow rate will be automatically regulated, in order to have the possibility of lowering.

Gas operation When outdoor temperatures are dropping drastically, it is no longer efficient to operate in hybrid mode.

At that point, the unit will switch automatically to gas operation only.

(1) heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C)

B. Domestic hot water Hot water produced with gas condensing technology Efficiency increase up to 10-15% compared to traditional gas condensing boilers thanks to a special dual heat exchanger: ūū cold tap water flows directly into the heat exchanger ūū optimal and continuous condensing of the flue gases during domestic hot water preparation.

59

Hybrid technology

Low investment benefits There is no need to replace the existing radiators (up to 80째C) and pipe work as our Daikin Altherma hybrid heat pump connects directly to the existing heating system, thus reducing the cost and disruption of installation. Thanks to the compact dimensions, the space needed for the new system is very similar to that of an existing system, so there is no loss of space and no need for structural modifications.

890 mm Daikin Altherma hybrid heat pump

Ideal for renovation applicationss Several applications are possible using the Daikin Altherma hybrid heat pump as all heat loads are covered up to 27 kW. The gas boiler can be installed without the heat pump in the early stages, in order to quickly restart heating in the case of a breakdown of the existing gas boiler.

60

450 mm

400 mm

890 mm

450 mm

Existing gas boiler

35 0m m

2. Dakin Altherma hybrid heat pump

Easy and fast installation: 3 components ūū Heat pump outdoor unit ūū Heat pump indoor unit ūū Gas condensing boiler

As the heat pump indoor unit and gas condensing boiler are delivered as separate units, they are easier to handle and manipulate, and easier to install.

The heat pump indoor unit is easily mounted on the wall with a standard back plate.

With the quick interconnections, the gas condensing boiler is easily attached to the heat pump indoor unit, resulting in a very compact unit. Similar to all wall mounted gas boilers, all the connections are at the bottom and all the components can be accessed from the front, which makes the unit easy to service and maintain.

Gas condensing boiler

307 m m

735 mm

832 mm

Heat pump outdoor unit

Heat pump indoor unit

61

Replacing a gas boiler with a Daikin Altherma hybrid heat pump means saving on running costs for both space heating and the domestic hot water supply.

Case Study A running cost comparison is made based on below parameters for a typical Belgian winter.

Thanks to the hybrid principle, the most cost-efficient operation will be used no matter what the ambient outdoor temperature is.

Heat consumption during winter 2000 1800

A 100% use of gas boiler B Heat pump + gas boiler C 100% use of heat pump

1600 1400

Heat consumption (kWh /째C)

1200 1000 800 600 400 200 0

-7

0

15

째C

+35% efficiency (space heating) compared to existing condensing gas boiler 62

5. Daikin Altherma hybrid heat pump

Daikin altherma hybrid heat pump

New gas condensing boiler

Existing gas condensing boiler

Space heating Energy supplied by HP

12,800 kWh

HP efficiency

3.64 Scop

Energy supplied by gas boiler

6,700 kWh

Space heating efficiency Running costs

19,500 kWh

19,500 kWh

90%

90%

75%

1,220 €

1,520 €

1,820 €

DHW HEATING Energy supplied by gas boiler*

3,000 kWh

3,000 kWh

3,000 kWh

DHW heating efficiency*

90%

80%

65 %

Running costs*

230 €

260 €

320 €

Running costs

1,450 €

1,780 €

TOTAL 2,140 €

* for combi-boiler, no separate domestic hot water tank

Yearly savings: for space heating and domestic hot water -19%

versus new gas condensing boiler

330 €/year

-32%

versus existing gas condensing boiler

690 €/year

Conditions Heat load

16 kW

Design temperature

-8°C

Space heating off temperature

16°C

Maximum water temperature

60°C

Minimum water temperature

38°C

Gas price

0.070 €/kWh

Electricity price (day)

0.237 €/kWh

Electricity price (night)

0.152 €/kWh

Total space heating requirement

19,500 kWh

Total DHW heating requirement (4 persons)

3,000 kWh

63

Combustion

6. Gas condensing boiler

64

6. Gas condensing boiler

Why choose the Daikin gas condensing boiler?

Customer requirement: a new wall mounted boiler ūū must simply replace the existing boiler ūū must provide heating and domestic hot water ūū increased efficiency and lower operating costs Your solution: the Daikin gas condensing boiler ūū dual heat exchanger giving lower operating costs ūū small size and easy connections makes for easy installation Customer benefits: ūū simple and fast installation ūū low operating costs due to high efficiencies ūū high quality touch and feel Your gains: ūū plug-and-play replacement Result: win-win for you AND the customer

65

Combustion

A new generation of high-efficiency boilers for top comfort and low costs

Low costs for both heating and hot water thanks to new dual heat exchanger Unique in the market: double condensation, not only for heating but also for domestic hot water resulting in low running costs

1. With the heat exchanger for space heating, maximum efficiency is reached by removing excess heat from flue gases, the condensation effect.the flue gases

[Unique Daikin feature]

2. Thanks to the dedicated heat exchanger for instantaneous domestic hot water production, the condensation effect is used for outstanding domestic hot water efficiency

66

6. Gas condensing boiler

Top comfort You expect Daikin to deliver maximum heating comfort and the domestic hot water needed in your customer’s home. Our innovative gas-fired condensing boiler provides it all, exactly as required.

Modulating high-efficiency boiler: low running costs at all times The Daikin gas condensing boiler is fitted with an advanced modulating controller that automatically adjusts the heat output of the boiler to maintain the correct temperature within the home and to optimise the efficiency of the heat exchanger.

In addition, an ECO comfort switch is fitted so that in ECO mode the domestic hot water is quickly heated and made available in line with your consumption history whilst in Comfort mode it is available at all times.

Gas condensing boiler

Beyond the ordinary Daikin total solutions As the market leader in heating systems that use renewable or recovered heat, we have a very extensive product range that has been designed for optimal performance and provides a flexible and total solution in almost every possible circumstance.

Whether you are looking for heating, cooling or domestic hot water production, Daikin has a system to suit.

Well known for our innovative Daikin Altherma air-to-water heat pumps, we also have hybrid heat pumps, ground source heat pumps. solar systems and air-to-air heat pumps.

B-pack

Easy installation in minimum space Installation time can be reduced to the minimum by using our optional pre-assembled B-pack which contains all the components for the functional installation in one module and fits behind the boiler.

And as there are fewer parts, the Daikin condensing gas boiler is more reliable and easier to service

67

At your service, with the Daikin selection tools

68

Daikin worked out three selection tools for an accurate estimation of your specific project and doing so Daikin provides a maximum of comfort, even in the early stage of choosing! / even when considering the options!

Make a quick estimation of savings on running costs and savings on CO2 emissions thanks to the Energy Savings Calculator.

The Daikin Altherma simulation software provides for every specific application an appropriate heat pump selection based on the specific house and location details. And for new houses or renovations the Daikin Altherma selection and simulation software allows quick and easy identification of the optimal mix of components.

To select your flue gas system, please visit http://fluegas.daikin.eu

69

Energy savings calculator Daikin provides a web-based tool to give a quick estimation of savings on running costs and savings on CO2 emissions. Based on a few inputs from the customer (location, house type, floor area, number of people), a comparison is made between the Daikin Altherma heat pump system and traditional heating systems. This comparison includes the space heating and domestic hot water heating. This is available for both new builds and refurbishment applications. http://ecocalc.daikin.eu

70

Simulation software The Daikin Altherma simulation software provides for every specific application an appropriate heat pump selection, taking into account the needs of the building and specific climate data. An installer can provide the following data: ūū house application: heat/cool load, water temperatures, power supply ūū climate conditions: location, design temperature ūū domestic hot water requirements: tank volume, material, solar connection ūū preferences: “heating off“ temperature, night setback function.

As well as a full material selection, the software provides detailed information for the installer and the end-user, on the expected outcome of the specified Daikin Altherma unit for its specific application and climate: ūū seasonal efficiency of the heat pump system ūū amount of back-up heater operation ūū energy consumption and energy cost per month ū ū savings on running costs compared to traditional heating systems All this information will be summarised in a detailed report.

Based on the specific house and location details, the software provides a full dimensioning assuring a correct material selection.

Check your local Daikin website for availability of this simulation software.

Selection and design software for Daikin Altherma Flex Type The Daikin Altherma selection and simulation software for new houses or renovations allows quick and easy identification of the optimal mix of components.

It automatically selects indoor and outdoor units based on the required heat loads per housing unit and calculates the required refrigerant piping dimensions.

The software also features: ūū automatic or manual selection of indoor units ūū automatic selection of outdoor units ūū calculation of refrigerant piping diameters ūū automatic selection of refnet headers and joints ūū creation of piping and wiring diagrams with the possibility to export them as DXF file ūū creation of extensive selection report.

71

Technical

specifications

1. Daikin Altherma ground source heat pump EGSQH-A9W

Daikin Altherma ground source heat pump Indoor Unit Heating capacity

Power input COP Casing

Min. Nom. Max. Nom.

EGSQH kW kW kW kW

Colour Material Dimensions Unit HeightxWidthxDepth mm Weight Unit kg Tank Water volume l kWh/24h Insulation Heat loss Corrosion protection °C Operation range Installation space Min.~Max. Brine side Min.~Max. °C °C Heating Water side Min.~Max. Domestic hot water Water side Min.~Max. °C Refrigerant Type Charge kg Sound power level Nom. dBA Sound pressure level Nom. dBA Power supply Name/Phase/Frequency/Voltage Hz/V Current Recommended fuses A (1) EWB/LWB 0°C/-3°C - LWC 35°C (DT=5°C) (2) EWB/LWB 0°C/-3°C - LWC 45°C (DT=5°C)

72

EGSQH-A9W

10S18A9W 3.11 (1) / 2.47 (2) 10.2 (1) / 9.29 (2) 13.0 (1) / 11.9 (2) 2.34 (1) / 2.82 (2) 4.35 (1) / 3.29 (2) White Precoated sheet metal 1,732x600x728 210 180 1.36 Anode 5~30 -5~20 24~60 (heat pump)/24-65 (heat pump + back up heater) (25~55 (heatpump)/25~60 (back up heater) R-410A 1.8 46 32 9W/3~/50/400 25

2. Daikin Altherma low temperature split

EHVH-CB + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHVH + ERLQ

Efficiency data Heating capacity

Power input

ERLQ004CV3

Min. Nom.

kW kW

Max.

kW

Heating

Nom.

kW

Max.

kW

08S18CB3V / 08S18CB3V / 08S26CB9W 08S26CB9W + 006CV3 + 008CV3

04S18CB3V + 004CV3 4.40 (1) / 4.03 (2) 5.12 (1) / 4.90 (2) 0.87 (1) / 1.13 (2)

1.80 (1) / 1.80 (2) 6.00 (1) / 7.40 (1) / 5.67 (2) 6.89 (2) 8.35 (1) / 10.02 (1) / 7.95 (2) 9.53 (2) 1.27 (1) / 1.66 (1) / 1.59 (2) 2.01 (2) -

Nominal efficiency COP 5.04 (1) / 3.58 (2)

Indoor unit

EHVH

Colour Material Dimensions Unit HeightxWidthxDepth mm Weight Unit kg Tank Water volume l kWh/24h Insulation Heat loss Corrosion protection Sound power level Cooling dBA Sound pressure level Cooling Nom. dBA

4.74 (1) / 3.56 (2)

4.45 (1) / 3.42 (2)

08S18CB3V / 08S26CB9W

04S18CB3V

Casing

Outdoor unit Dimensions Weight Operation range

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Heating Sound pressure Heating Nom. level Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

ERLQ mm kg °CDB °CWB

116 180 1.4

117/126

11S18CB3V / 11S26CB9W + 011CV3

16S18CB3V / 16S26CB9W + 014CV3

16S18CB3V / 16S26CB9W + 016CV3

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4)

54

11S18CB3V / 11S26CB9W + 011CW1

16S18CB3V / 16S26CB9W + 014CW1

16S18CB3V / 16S26CB9W + 016CW1

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4)

-

11S18CB3V 11S26CB9W

16S18CB3V / 16S26CB9W White Precoated sheet metal 1,732x600x728 117/126 118/127 180/260 1.4/1.9 Anode

42 28 004CV3

EHVH-CB

11S18CB3V / 11S26CB9W

16S18CB3V / 16S26CB9W

117/126

118/127

-

006CV3 008CV3 735x832x307 56 -25~25 -25~35

011CV3

014CV3

016CV3 011CW1 1,345x900x320

014CW1

113

016CW1

114 -25~35 -20~35

R-410A kg dBA dBA Hz / V A

1.45

1.60

3.4

61

62

64

66

48

49

51

52

V3/1~/50/230 20

40

64

66

51

52

W1/3N~/50/400 20

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) Condition 3: heating Ta DB -7°C (RH85%) - LWC 35°C (4) Condition 4: heating Ta DB -7°C (RH85%) - LWC 45°C

73

EHVH-CB + ERHQ-BV3/BW1

Daikin Altherma low temperature split EHVH + ERHQ

Efficiency data Heating capacity Nom. Power input Heating Nominal efficiency COP

Nom.

Indoor unit Colour Material Dimensions Unit Weight Unit Sound power level Cooling Sound pressure level Cooling

EHVH-CB

11S18CB3V / 11S26CB9W + 011BV3

16S18CB3V / 16S26CB9W + 014BV3

16S18CB3V / 16S26CB9W + 016BV3

Outdoor unit Dimensions Weight Operation range

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Heating Sound pressure Heating Nom. level Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

mm kg dBA dBA ERHQ mm kg °CDB °CWB kg dBA dBA Hz / V A

(1) DB/WB 7°C/6°C - LWC 35°C (DT=5°C) - (2) DB/WB 7°C/6°C - LWC 45°C (Dt=5°C)

74

16S18CB3V / 16S26CB9W + 016BW1

11S18CB3V / 11S26CB9W

16S18CB3V / 16S26CB9W

16S18CB3V / 16S26CB9W

117/126

118/127

118/127

Casing

Nom.

16S18CB3V / 16S26CB9W + 014BW1

kW 11.2 (1) / 10.3 (2) 14.0 (1) / 13.1 (2) 16.0 (1) / 15.2 (2) 11.32 (1) / 10.98 (2) 14.50 (1) / 13.57 (2) 16.05 (1) / 15.11 (2) kW 2.55 (1) / 3.17 (2) 3.26 (1) / 4.04 (2) 3.92 (1) / 4.75 (2) 2.63 (1) / 3.24 (2) 3.42 (1) / 4.21 (2) 3.82 (1) / 4.69 (2) 4.39 (1) / 3.25 (2) 4.29 (1) / 3.24 (2) 4.08 (1) / 3.20 (2) 4.30 (1) / 3.39 (2) 4.24 (1) / 3.22 (2) 4.20 (1) / 3.22 (2) EHVH

HeightxWidthxDepth

11S18CB3V / 11S26CB9W + 011BW1

ERHQ-BV3

011BV3

014BV3 1,170x900x320 103

11S18CB3V / 11S26CB9W White Precoated sheet metal 1,732x600x728 117/126 -

016BV3

011BW1

014BW1 1,345x900x320 108

016BW1

-20~35 -20~35 R-410A 2.7 64 49

51 V3/1~/50/230 32

2.95 66

64

66

53

51

52

W1/3N~/50/400 20

EHVX-CB + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHVX + ERLQ

Efficiency data Heating capacity

Cooling capacity

EHVX-CB

Min. Nom.

kW kW

Max.

kW

Min. Nom.

Power input

Heating

Cooling

Nom.

kW

Max.

kW

Nom.

kW

08S18CB3V / 08S18CB3V / 08S26CB9W 08S26CB9W + 006CV3 + 008CV3

11S18CB3V / 11S26CB9W + 011CV3

16S18CB3V / 16S26CB9W + 014CV3

16S18CB3V / 16S26CB9W + 016CV3

1.80 (1) / 1.80 (2) 6.00 (1) / 7.40 (1) / 5.67 (2) 6.89 (2) 8.35 (1) / 10.02 (1) / 7.95 (2) 9.53 (2)

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4)

12.13 (1) / 11.72 (2) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 3.05 (1) / 4.31 (2) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4) 3.98 (1) / 2.72 (2)

12.72 (1) / 12.55 (2) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 3.21 (1) / 5.08 (2) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4) 3.96 (1) / 2.47 (2)

13.79 (1) / 13.12 (2) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 3.74 (1) / 5.73 (2) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4) 3.69 (1) / 2.29 (2)

04S18CB3V + 004CV3 4.40 (1) / 4.03 (2) 5.12 (1) / 4.90 (2) 2.00 (1) / 2.00 (2) 4.08 (1) / 4.17 (2) 0.87 (1) / 1.13 (2)

6.20 (1) / 5.36 (2) 1.66 (1) / 2.01 (2)

0.90 (1) / 1.80 (2)

1.51 (1) / 2.07 (2)

1.64 (1) / 2.34 (2)

5.04 (1) / 3.58 (2)

4.74 (1) / 3.56 (2)

4.45 (1) / 3.42 (2)

4.55 (1) / 2.32 (2)

3.89 (1) / 2.34 (2)

3.79 (1) / 2.29 (2)

Nominal efficiency COP

EER

Indoor unit

EHVX

Colour Material Dimensions Unit HeightxWidthxDepth mm Weight Unit kg Tank Water volume l kWh/24h Insulation Heat loss Corrosion protection Sound power level Cooling dBA Sound pressure level Cooling Nom. dBA

08S18CB3V / 08S26CB9W

04S18CB3V

Casing

Outdoor unit Dimensions Weight Operation range

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Cooling Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Cooling Heating Nom./Silent operation Sound pressure Cooling level Heating Nom. Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

117 180 1.4

119/128

004CV3

kg dBA dBA dBA dBA Hz / V A

1.45

54

16S18CB3V / 16S18CB3V / 16S26CB9W 16S26CB9W + 014CW1 + 016CW1

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4)

12.13 (1) / 11.72 (2) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 3.05 (1) / 4.31 (2) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4) 3.98 (1) / 2.72 (2)

12.72 (1) / 12.55 (2) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 3.21 (1) / 5.08 (2) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4) 3.96 (1) / 2.47 (2)

13.79 (1) / 13.12 (2) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 3.74 (1) / 5.73 (2) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4) 3.69 (1) / 2.29 (2)

-

11S18CB3V / 11S26CB9W

16S18CB3V / 16S26CB9W White Precoated sheet metal 1,732x600x728 120/129 180/260 1.4/1.9 Anode

42 28

ERLQ mm kg °CDB °CWB °CWB

11S18CB3V / 11S26CB9W + 011CW1 -

2.50 (1) / 2.50 (2) 5.88 (1) / 4.84 (2) 1.27 (1) / 1.59 (2)

ERLQ004CV3

11S18CB3V / 11S26CB9W

16S18CB3V / 16S26CB9W

119/128

120/129

-

006CV3 008CV3 735x832x307 56 -25~25 10~43 -25~35

011CV3

014CV3

016CV3 011CW1 1,345x900x320

014CW1

113

016CW1

114 -25~35 10~46 -20~35

R-410A 1.60 61

64

63

64

49

49 50 50 V3/1~/50/230

48 48

3.4 62

20

66 51 52 40

66 69 52 54

64 64

66 51

50

52 W1/3N~/50/400 20

66 69 52 54

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) Condition 3: heating Ta DB -7°C (RH85%) - LWC 35°C (4) Condition 4: heating Ta DB -7°C (RH85%) - LWC 45°C

75

EHVX-CB + ERHQ-BV3/BW1

Daikin Altherma low temperature split EHVX + ERHQ

Efficiency data Heating capacity Cooling capacity Power input

Nom. Nom. Heating Cooling Nominal efficiency COP EER

kW kW kW kW

Nom. Nom.

Indoor unit Colour Material Dimensions Unit Weight Unit Sound power level Cooling Sound pressure level Cooling

ERLQ004CV3

EHVX

Outdoor unit Dimensions Weight Operation range

Nom. Nom.

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Cooling Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Heating Cooling Sound pressure Heating Nom. level Cooling Nom. Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

mm kg dBA dBA ERHQ mm kg °CDB °CDB °CWB kg dBA dBA dBA dBA Hz / V A

(1)DB/WB 7°C/6°C - LWC 35°C (DT=5°C) - (2) DB/WB 7°C/6°C - LWC 45°C (Dt=5°C)

76

ERHQ-BV3

11S18CB3V / 11S26CB9W + 011BV3

16S18CB3V / 16S26CB9W + 014BV3

16S18CB3V / 16S26CB9W + 016BV3

11S18CB3V / 11S26CB9W + 011BW1

16S18CB3V / 16S26CB9W + 014BW1

16S18CB3V / 16S26CB9W + 016BW1

11.2 (1) / 10.30 (2) 13.9 (1) / 10.0 (2) 2.55 (1) / 3.17 (2) 3.86 (1) / 3.69 (2) 4.39 (1) / 3.25 (2) 3.60 (1) / 2.71 (2)

14.0 (1) / 13.1 (2) 17.3 (1) / 12.5 (2) 3.26 (1) / 4.04 (2) 5.86 (1) / 5.39 (2) 4.29 (1) / 3.24 (2) 2.95 (1) / 2.32 (2)

16.0 (1) / 15.2 (2) 17.8 (1) / 13.1 (2) 3.92 (1) / 4.75 (2) 6.87 (1) / 5.95 (2) 4.08 (1) / 3.20 (2) 2.59 (1) / 2.20 (2)

11.32 (1) / 10.98 (2) 15.05 (1) / 11.72 (2) 2.63 (1) / 3.24 (2) 4.53 (1) / 4.31 (2) 4.30 (1) / 3.39 (2) 3.32 (1) / 2.72 (2)

14.50 (1) / 13.57 (2) 16.06 (1) / 12.55 (2) 3.42 (1) / 4.21 (2) 5.43 (1) / 5.08 (2) 4.24 (1) / 3.22 (2) 2.96 (1) / 2.47 (2)

16.05 (1) / 15.11 (2) 16.76 (1) / 13.12 (2) 3.82 (1) / 4.69 (2) 6.16 (1) / 5.73 (2) 4.20 (1) / 3.22 (2) 2.72 (1) / 2.29 (2)

11S18CB3V / 11S26CB9W

16S18CB3V / 16S26CB9W

16S18CB3V / 16S26CB9W

119/128

120/129

120/129

Casing

HeightxWidthxDepth

EHVX-CB

011BV3

014BV3 1,170x900x320 103 -20~35

11S18CB3V / 11S26CB9W White Precoated sheet metal 1,732x600x728 119/128 -

016BV3

011BW1

014BW1 1,345x900x320 108 -25~35

016BW1

10~46 -20~35 R-410A 2.7 64 64 49 50

66 51 52 V3/1~/50/230 32

2.95 66 69 53 54

64 64

66 51

50

52 W1/3N~/50/400 20

66 69 52 54

EHSH-A + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHSH + ERLQ kW kW

Efficiency data Heating capacity

Power input

Min. Nom. Max. Heating

Nom. Max.

COP

Indoor Unit Casing

04P30A + 004CV3 1.80 / 1.81 4.53 / 3.98 / 4.26 / 3.47 kW 5.12 / 4.90 kW 0.87 / 1.04 / 1.49 / 0.85 kW 1.12 / 1.44 5.23 / 3.84 / 2.85 / 4.07

08P50A + 006CV3 1.80 / 1.81 6.06 / 5.78 / 5.14 / 4.60 8.35 / 7.95 1.30 / 1.58 / 1.88 / 1.26 1.99 / 2.32 4.65 / 3.66 / 2.73 / 3.64

EHSH 04P30A 08P50A

Colour Material Dimensions Unit HeightxWidthxDepth Weight Unit Tank Water volume Maximum water temperature Sound power level Nom. Sound pressure level Nom. Outdoor Unit Dimensions Weight Compressor

Unit HeightxWidthxDepth Unit Quantity Type Operation range Heating Min.~Max. Domestic hot water Min.~Max. Refrigerant Type Charge Sound power level Heating Nom. Sound pressure Heating Nom. level Power supply Name/Phase/Frequency/Voltage Current

EHSH04-08P30A

Recommended fuses

mm 1,945x615x595 1,945x790x790 kg 87 114 l 300 500 °C dBA dBA ERLQ 004CV3 mm kg 54

°CWB °CDB kg dBA dBA Hz/V A

08P30A + 006CV3 1.80 / 1.81 6.06 / 5.78 / 5.14 / 4.60 8.35 / 7.95 1.30 / 1.58 / 1.88 / 1.26 1.99 / 2.32 4.65 / 3.66 / 2.73 / 3.64

08P30A + 008CV3 1.80 / 1.81 7.78 / 7.27 / 5.53 / 5.51 10.02 / 9.53 1.69 / 2.04 / 1.98 / 1.56 2.54 / 2.96 4.60 / 3.57 / 2.78 / 3.54

08P50A + 008CV3 1.80 / 1.81 7.78 / 7.27 / 5.53 / 5.51 10.02 / 9.53 1.69 / 2.04 / 1.98 / 1.56 2.54 / 2.96 4.60 / 3.57 / 2.78 / 3.54

EHSH08-16P50A

ERLQ004-008CV3

16P50A 16P50A 16P50A 16P50A 16P50A 16P50A + + + + + + 011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 11.80 / 10.40 / 11.80 / 10.40 / 14.81 / 13.73 / 14.81 / 13.73 / 15.34 / 14.86 / 15.34 / 14.86 / 5.95 / 7.74 5.95 / 7.74 8.28 / 9.57 8.28 / 9.57 8.04 / 10.05 8.04 / 10.05 11.38 / 11.00 11.38 / 11.00 14.55 / 13.59 14.55 / 13.59 16.10 / 15.22 16.10 / 15.22 2.57 / 3.13 / 2.57 / 3.13 / 3.42 / 4.07 / 3.42 / 4.07 / 3.42 / 4.07 / 3.42 / 4.07 / 2.43 / 2.35 2.43 / 2.35 3.17 / 2.93 3.17 / 2.93 3.17 / 2.93 3.17 / 2.93 2.64 / 3.25 2.64 / 3.25 3.43 / 4.22 3.43 / 4.22 3.83 / 4.71 3.83 / 4.71 4.38 / 3.32 / 4.38 / 3.32 / 4.27 / 3.34 / 4.27 / 3.34 / 4.10 / 3.22 / 4.10 / 3.22 / 2.45 / 3.29 2.45 / 3.29 2.58 / 3.22 2.58 / 3.22 2.44 / 3.15 2.44 / 3.15

08P30A 08P50A 16P50A Traffic white (RAL9016) / Dark grey (RAL7011) Impact resistant polypropylene 1,945x615x595 1,945x790x790 87 114 116 300 500 85 40 28

006CV3 735x832x307 56

008CV3

Hermetically sealed swing compressor -25~25 -25~35 1.45

1.60 61

62

48

49

011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 1,345x900x320 113 114 113 114 113 114 1 Hermetically sealed scroll compressor -25~35 -20~35 R-410A 3.4 64 66 51

V3/1~/50/230 20

40

52

W1/3N~/ V3/1~/ W1/3N~/ V3/1~/ W1/3N~/ 50/400 50/230 50/400 50/230 50/400 20 40 20 40 20

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) EW 30°C; LW 35°C; ambient conditions: -7°CDB/-8°CWB (4) EW 30°C; LW 35°C; ambient conditions: 2°CDB/1°CWB

77

EHSHB-A + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHSHB + ERLQ kW kW

Efficiency data Heating capacity

Power input

Min. Nom. Max. Heating

Nom. Max.

COP EER Indoor Unit Casing

Colour Material Dimensions Unit HeightxWidthxDepth Weight Unit Tank Water volume Maximum water temperature Sound power level Nom. Sound pressure level Nom. Outdoor Unit Dimensions Weight Compressor

Unit HeightxWidthxDepth Unit Quantity Type Operation range Heating Min.~Max. Domestic hot water Min.~Max. Refrigerant Type Charge Sound power level Heating Nom. Sound pressure level Heating Nom. Power supply Name/Phase/Frequency/Voltage Current

EHSHB04-08P30A

Recommended fuses

04P30A + 004CV3 1.80 / 1.81 4.53 / 3.98 / 4.26 / 3.47 kW 5.12 / 4.90 kW 0.87 / 1.04 / 1.49 / 0.85 kW 1.12 / 1.44 5.23 / 3.84 / 2.85 / 4.07 4.21 / 2.85

08P30A + 006CV3 1.80 / 1.81 6.06 / 5.78 / 5.14 / 4.60 8.35 / 7.95 1.30 / 1.58 / 1.88 / 1.26 1.99 / 2.32 4.65 / 3.66 / 2.73 / 3.64 3.65 / 2.51

08P50A + 006CV3 1.80 / 1.81 6.06 / 5.78 / 5.14 / 4.60 8.35 / 7.95 1.30 / 1.58 / 1.88 / 1.26 1.99 / 2.32 4.65 / 3.66 / 2.73 / 3.64 3.65 / 2.51

08P30A + 008CV3 1.80 / 1.81 7.78 / 7.27 / 5.53 / 5.51 10.02 / 9.53 1.69 / 2.04 / 1.98 / 1.56 2.54 / 2.96 4.60 / 3.57 / 2.78 / 3.54 3.65 / 2.51

08P50A + 008CV3 1.80 / 1.81 7.78 / 7.27 / 5.53 / 5.51 10.02 / 9.53 1.69 / 2.04 / 1.98 / 1.56 2.54 / 2.96 4.60 / 3.57 / 2.78 / 3.54 3.65 / 2.51

EHSHB08-16P50A

ERLQ004-008CV3

16P50A 16P50A 16P50A 16P50A 16P50A 16P50A + + + + + + 011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 11.80 / 10.40 / 11.80 / 10.40 / 14.81 / 13.73 / 14.81 / 13.73 / 15.34 / 14.86 / 15.34 / 14.86 / 5.95 / 7.74 5.95 / 7.74 8.28 / 9.57 8.28 / 9.57 8.04 / 10.05 8.04 / 10.05 11.38 / 11.00 11.38 / 11.00 14.55 / 13.59 14.55 / 13.59 16.10 / 15.22 16.10 / 15.22 2.57 / 3.13 / 2.57 / 3.13 / 3.42 / 4.07 / 3.42 / 4.07 / 3.42 / 4.07 / 3.42 / 4.07 / 2.43 / 2.35 2.43 / 2.35 3.17 / 2.93 3.17 / 2.93 3.17 / 2.93 3.17 / 2.93 2.64 / 3.25 2.64 / 3.25 3.43 / 4.22 3.43 / 4.22 3.83 / 4.71 3.83 / 4.71 4.38 / 3.32 / 4.38 / 3.32 / 4.27 / 3.34 / 4.27 / 3.34 / 4.10 / 3.22 / 4.10 / 3.22 / 2.45 / 3.29 2.45 / 3.29 2.58 / 3.22 2.58 / 3.22 2.44 / 3.15 2.44 / 3.15 3.32 / 2.72 3.32 / 2.72 2.96 / 2.47 2.96 / 2.47 2.72 / 2.29 2.72 / 2.29

EHSHB 04P30A 08P30A 08P50A 08P30A 08P50A 16P50A Traffic white (RAL9016) / Dark grey (RAL7011) Impact resistant polypropylene 1,945x790x790 mm 1,945x615x595 1,945x790x790 1,945x615x595 kg 92 119 92 119 121 l 300 500 300 500 °C 85 dBA 40 dBA 28 ERLQ 004CV3 mm kg 54

°CWB °CDB kg dBA dBA Hz/V A

006CV3 735x832x307 56

008CV3

Hermetically sealed swing compressor -25~25 -25~35 1.45

1.60 61 48

62 49 V3/1~/50/230 20

011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 1,345x900x320 113 114 113 114 113 114 1 Hermetically sealed scroll compressor -25~35 -20~35 R-410A 3.4 64 66 51 52 W1/3N~/ V3/1~/ W1/3N~/ V3/1~/ W1/3N~/ 50/400 50/230 50/400 50/230 50/400 40 20 40 20 40 20

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) EW 30°C; LW 35°C; ambient conditions: -7°CDB/-8°CWB (4) EW 30°C; LW 35°C; ambient conditions: 2°CDB/1°CWB

78

EHSXB-A + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHSXB + ERLQ kW kW

Efficiency data Heating capacity

Cooling capacity

Power input

Min. Nom.

Max. Min. Nom. Max. Heating

Cooling

EHSXB08-16P50A

Nom.

kW kW kW kW kW

Max. Nom. Max.

kW kW kW

COP

EER Indoor Unit Casing

Colour Material Dimensions Unit HeightxWidthxDepth Weight Unit Tank Water volume Maximum water temperature Operation range Domestic hot Water side Min.~Max. water Sound power level Nom. Sound pressure level Nom. Outdoor Unit Dimensions Weight Compressor

Unit HeightxWidthxDepth Unit Quantity Type Operation range Heating Min.~Max. Cooling Min.~Max. Domestic hot water Min.~Max. Refrigerant Type Charge Sound power level Heating Nom. Cooling Nom. Sound pressure Heating Nom. level Cooling Nom. Power supply Name/Phase/Frequency/Voltage Current

Recommended fuses

04P30A + 004CV3 1.80 (1) / 1.81 (2) 4.53 (1) / 3.98 (2) / 4.26 (3) / 3.47 (4) 5.12 (1) / 4.90 (2) 2.0 (1) / 2.1 (2) 4.4 (1) / 4.0 (2) 5.9 (1) / 4.5 (2) 0.87 (1) / 1.04 (2) / 1.49 (3) / 0.85 (4) 1.12 (1) / 1.44 (2) 1.05 (1) / 1.41 (2) 1.86 (1) / 2.04 (2) 5.23 (1) / 3.84 (2) / 2.85 (3) / 4.07 (4) 4.21 (1) / 2.85 (2)

08P30A 08P50A 08P30A 08P50A + + + + 006CV3 006CV3 008CV3 008CV3 1.80 (1) / 1.81 (2) 1.80 (1) / 1.81 (2) 1.80 (1) / 1.81 (2) 1.80 (1) / 1.81 (2) 6.06 (1) / 5.78 6.06 (1) / 5.78 7.78 (1) / 7.27 7.78 (1) / 7.27 (2) / 5.14 (3) / (2) / 5.14 (3) / (2) / 5.53 (3) / (2) / 5.53 (3) / 4.60 (4) 4.60 (4) 5.51 (4) 5.51 (4) 8.35 (1) / 7.95 (2) 8.35 (1) / 7.95 (2) 10.02 (1) / 9.53 (2) 10.02 (1) / 9.53 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 5.2 (1) / 4.6 (2) 5.2 (1) / 4.6 (2) 5.2 (1) / 4.6 (2) 5.2 (1) / 4.6 (2) 7.3 (1) / 5.5 (2) 7.3 (1) / 5.5 (2) 8.4 (1) / 6.4 (2) 8.4 (1) / 6.4 (2) 1.30 (1) / 1.58 (2) / 1.30 (1) / 1.58 (2) / 1.69 (1) / 2.04 (2) / 1.69 (1) / 2.04 (2) / 1.88 (3) / 1.26 (4) 1.88 (3) / 1.26 (4) 1.98 (3) / 1.56 (4) 1.98 (3) / 1.56 (4) 1.99 (1) / 2.32 (2) 1.99 (1) / 2.32 (2) 2.54 (1) / 2.96 (2) 2.54 (1) / 2.96 (2) 1.43 (1) / 1.85 (2) 1.43 (1) / 1.85 (2) 1.43 (1) / 1.85 (2) 1.43 (1) / 1.85 (2) 2.27 (1) / 2.51 (2) 2.27 (1) / 2.51 (2) 2.89 (1) / 3.20 (2) 2.89 (1) / 3.20 (2) 4.65 (1) / 3.66 4.65 (1) / 3.66 4.60 (1) / 3.57 4.60 (1) / 3.57 (2) / 2.73 (3) / (2) / 2.73 (3) / (2) / 2.78 (3) / (2) / 2.78 (3) / 3.64 (4) 3.64 (4) 3.54 (4) 3.54 (4) 3.65 (1) / 2.51 (2) 3.65 (1) / 2.51 (2) 3.65 (1) / 2.51 (2) 3.65 (1) / 2.51 (2)

EHSXB04-08P30A

ERLQ004-008CV3

16P50A 16P50A 16P50A 16P50A 16P50A 16P50A + + + + + + 011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 11.80 (1) / 10.40 11.80 (1) / 10.40 14.81 (1) / 13.73 14.81 (1) / 13.73 15.34 (1) / 14.86 15.34 (1) / 14.86 (2) / 5.95 (3) / (2) / 5.95 (3) / (2) / 8.28 (3) / (2) / 8.28 (3) / (2) / 8.04 (3) / (2) / 8.04 (3) / 7.74 (4) 7.74 (4) 9.57 (4) 9.57 (4) 10.05 (4) 10.05 (4) 11.38 (1) / 11.00 (2) 11.38 (1) / 11.00 (2) 14.55 (1) / 13.59 (2) 14.55 (1) / 13.59 (2) 16.10 (1) / 15.22 (2) 16.10 (1) / 15.22 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 15.1 (1) / 11.7 (2) 15.1 (1) / 11.7 (2) 16.1 (1) / 12.6 (2) 16.1 (1) / 12.6 (2) 16.8 (1) / 13.1 (2) 16.8 (1) / 13.1 (2) 15.1 (1) / 11.7 (2) 15.1 (1) / 11.7 (2) 16.1 (1) / 12.6 (2) 16.1 (1) / 12.6 (2) 16.8 (1) / 13.1 (2) 16.8 (1) / 13.1 (2) 2.57 (1) / 3.13 (2) / 2.57 (1) / 3.13 (2) / 3.42 (1) / 4.07 (2) / 3.42 (1) / 4.07 (2) / 3.42 (1) / 4.07 (2) / 3.42 (1) / 4.07 (2) / 2.43 (3) / 2.35 (4) 2.43 (3) / 2.35 (4) 3.17 (3) / 2.93 (4) 3.17 (3) / 2.93 (4) 3.17 (3) / 2.93 (4) 3.17 (3) / 2.93 (4) 2.64 (1) / 3.25 (2) 2.64 (1) / 3.25 (2) 3.43 (1) / 4.22 (2) 3.43 (1) / 4.22 (2) 3.83 (1) / 4.71 (2) 3.83 (1) / 4.71 (2) 4.55 (1) / 4.30 (2) 4.55 (1) / 4.30 (2) 5.44 (1) / 5.10 (2) 5.44 (1) / 5.10 (2) 6.18 (1) / 5.72 (2) 6.18 (1) / 5.72 (2) 4.53 (1) / 4.31 (2) 4.53 (1) / 4.31 (2) 5.42 (1) / 5.09 (2) 5.42 (1) / 5.09 (2) 6.15 (1) / 5.74 (2) 6.15 (1) / 5.74 (2) 4.38 (1) / 3.32 4.38 (1) / 3.32 4.27 (1) / 3.34 4.27 (1) / 3.34 4.10 (1) / 3.22 4.10 (1) / 3.22 (2) / 2.45 (3) / (2) / 2.45 (3) / (2) / 2.58 (3) / (2) / 2.58 (3) / (2) / 2.44 (3) / (2) / 2.44 (3) / 3.29 (4) 3.29 (4) 3.22 (4) 3.22 (4) 3.15 (4) 3.15 (4) 3.32 (1) / 2.72 (2) 3.32 (1) / 2.72 (2) 2.96 (1) / 2.47 (2) 2.96 (1) / 2.47 (2) 2.72 (1) / 2.29 (2) 2.72 (1) / 2.29 (2)

EHSXB 04P30A 08P30A 08P50A 08P30A 08P50A 16P50A Traffic white (RAL9016) / Dark grey (RAL7011) Impact resistant polypropylene 1,945x790x790 mm 1,945x615x595 1,945x790x790 1,945x615x595 kg 92 119 92 119 121 l 300 500 300 500 °C 85 °C 25~55 dBA dBA

40 28

ERLQ 004CV3 mm kg 54

°CWB °CDB °CDB kg dBA dBA dBA dBA Hz/V A

006CV3 735x832x307 56

008CV3

Hermetically sealed swing compressor -25~25 10~43 -25~35 1.45

1.60 61

62 63

48 48

49 50

49 V3/1~/50/230 20

011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 1,345x900x320 113 114 113 114 113 114 1 Hermetically sealed scroll compressor -25~35 10.0~46.0 10~46 10.0~46.0 10~46 10.0~46.0 10~46 -20~35 R-410A 3.4 64 66 64 66 69 51 52 50 52 54 W1/3N~/ V3/1~/ W1/3N~/ V3/1~/5 W1/3N~/ 50/400 50/230 50/400 0/230 50/400 40 20 40 20 40 20

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) EW 30°C; LW 35°C; ambient conditions: -7°CDB/-8°CWB (4) EW 30°C; LW 35°C; ambient conditions: 2°CDB/1°CWB

79

EHSX-A + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHSX + ERLQ kW kW

Efficiency data Heating capacity

Cooling capacity

Power input

Min. Nom. Max. Min. Nom. Max. Heating

Cooling

EHSX08-16P50A

Nom.

kW kW kW kW kW

Max. Nom. Max.

kW kW kW

COP EER

04P30A + 004CV3 1.80 (1) / 1.81 (2) 4.53 (1) / 3.98 (2) / 4.26 (3) / 3.47 (4) 5.12 (1) / 4.90 (2) 2.0 (1) / 2.1 (2) 4.4 (1) / 4.0 (2) 5.9 (1) / 4.5 (2) 0.87 / 1.04 / 1.49 / 0.85 1.12 (1) / 1.44 (2) 1.05 (1) / 1.41 (2) 1.86 (1) / 2.04 (2) 5.23 (1) / 3.84 (2) / 2.85 (3) / 4.07 (4) 4.21 (1) / 2.85 (2)

08P30A 08P50A 08P30A 08P50A + + + + 006CV3 006CV3 008CV3 008CV3 1.80 (1) / 1.81 (2) 1.80 (1) / 1.81 (2) 1.80 (1) / 1.81 (2) 1.80 (1) / 1.81 (2) 6.06 (1) / 5.78 (2) / 6.06 (1) / 5.78 (2) / 7.78 (1) / 7.27 (2) / 7.78 (1) / 7.27 (2) / 5.14 (3) / 4.60 (4) 5.14 (3) / 4.60 (4) 5.53 (3) / 5.51 (4) 5.53 (3) / 5.51 (4) 8.35 (1) / 7.95 (2) 8.35 (1) / 7.95 (2) 10.02 (1) / 9.53 (2) 10.02 (1) / 9.53 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 5.2 (1) / 4.6 (2) 5.2 (1) / 4.6 (2) 5.2 (1) / 4.6 (2) 5.2 (1) / 4.6 (2) 7.3 (1) / 5.5 (2) 7.3 (1) / 5.5 (2) 8.4 (1) / 6.4 (2) 8.4 (1) / 6.4 (2) 1.30 / 1.58 / 1.30 / 1.58 / 1.69 / 2.04 / 1.69 / 2.04 / 1.88 / 1.26 1.88 / 1.26 1.98 / 1.56 1.98 / 1.56 1.99 (1) / 2.32 (2) 1.99 (1) / 2.32 (2) 2.54 (1) / 2.96 (2) 2.54 (1) / 2.96 (2) 1.43 (1) / 1.85 (2) 1.43 (1) / 1.85 (2) 1.43 (1) / 1.85 (2) 1.43 (1) / 1.85 (2) 2.27 (1) / 2.51 (2) 2.27 (1) / 2.51 (2) 2.89 (1) / 3.20 (2) 2.89 (1) / 3.20 (2) 4.65 (1) / 3.66 (2) / 4.65 (1) / 3.66 (2) / 4.60 (1) / 3.57 (2) / 4.60 (1) / 3.57 (2) / 2.73 (3) / 3.64 (4) 2.73 (3) / 3.64 (4) 2.78 (3) / 3.54 (4) 2.78 (3) / 3.54 (4) 3.65 (1) / 2.51 (2) 3.65 (1) / 2.51 (2) 3.65 (1) / 2.51 (2) 3.65 (1) / 2.51 (2)

EHSX04-08P30A

16P50A 16P50A 16P50A 16P50A 16P50A 16P50A + + + + + + 011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 11.80 (1) / 10.40 (2) / 11.80 (1) / 10.40 (2) / 14.81 (1) / 13.73 (2) / 14.81 (1) / 13.73 (2) / 15.34 (1) / 14.86 (2) / 15.34 (1) / 14.86 (2) / 5.95 (3) / 7.74 (4) 5.95 (3) / 7.74 (4) 8.28 (3) / 9.57 (4) 8.28 (3) / 9.57 (4) 8.04 (3) / 10.05 (4) 8.04 (3) / 10.05 (4) 11.38 (1) / 11.00 (2) 11.38 (1) / 11.00 (2) 14.55 (1) / 13.59 (2) 14.55 (1) / 13.59 (2) 16.10 (1) / 15.22 (2) 16.10 (1) / 15.22 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 2.5 (1) / 2.6 (2) 15.1 (1) / 11.7 (2) 15.1 (1) / 11.7 (2) 16.1 (1) / 12.6 (2) 16.1 (1) / 12.6 (2) 16.8 (1) / 13.1 (2) 16.8 (1) / 13.1 (2) 15.1 (1) / 11.7 (2) 15.1 (1) / 11.7 (2) 16.1 (1) / 12.6 (2) 16.1 (1) / 12.6 (2) 16.8 (1) / 13.1 (2) 16.8 (1) / 13.1 (2) 2.57 / 3.13 / 2.57 / 3.13 / 3.42 / 4.07 / 3.42 / 4.07 / 3.42 / 4.07 / 3.42 / 4.07 / 2.43 / 2.35 2.43 / 2.35 3.17 / 2.93 3.17 / 2.93 3.17 / 2.93 3.17 / 2.93 2.64 (1) / 3.25 (2) 2.64 (1) / 3.25 (2) 3.43 (1) / 4.22 (2) 3.43 (1) / 4.22 (2) 3.83 (1) / 4.71 (2) 3.83 (1) / 4.71 (2) 4.55 (1) / 4.30 (2) 4.55 (1) / 4.30 (2) 5.44 (1) / 5.10 (2) 5.44 (1) / 5.10 (2) 6.18 (1) / 5.72 (2) 6.18 (1) / 5.72 (2) 4.53 (1) / 4.31 (2) 4.53 (1) / 4.31 (2) 5.42 (1) / 5.09 (2) 5.42 (1) / 5.09 (2) 6.15 (1) / 5.74 (2) 6.15 (1) / 5.74 (2) 4.38 (1) / 3.32 (2) / 4.38 (1) / 3.32 (2) / 4.27 (1) / 3.34 (2) / 4.27 (1) / 3.34 (2) / 4.10 (1) / 3.22 (2) / 4.10 (1) / 3.22 (2) / 2.45 (3) / 3.29 (4) 2.45 (3) / 3.29 (4) 2.58 (3) / 3.22 (4) 2.58 (3) / 3.22 (4) 2.44 (3) / 3.15 (4) 2.44 (3) / 3.15 (4) 3.32 (1) / 2.72 (2) 3.32 (1) / 2.72 (2) 2.96 (1) / 2.47 (2) 2.96 (1) / 2.47 (2) 2.72 (1) / 2.29 (2) 2.72 (1) / 2.29 (2)

Indoor Unit Casing

EHSX 04P30A 08P30A 08P50A 08P30A 08P50A 16P50A Traffic white (RAL9016) / Dark grey (RAL7011) Impact resistant polypropylene 1,945x790x790 mm 1,945x615x595 1,945x790x790 1,945x615x595 kg 87 114 87 114 116 l 300 500 300 500 °C 85 dBA 40 dBA 28

Outdoor Unit Dimensions Weight Compressor

ERLQ 004CV3 mm kg 54

Colour Material Dimensions Unit HeightxWidthxDepth Weight Unit Tank Water volume Maximum water temperature Sound power level Nom. Sound pressure level Nom.

Unit HeightxWidthxDepth Unit Quantity Type Operation range Heating Min.~Max. Cooling Min.~Max. Domestic hot water Min.~Max. Refrigerant Type Charge Sound power level Heating Nom. Cooling Nom. Sound pressure Heating Nom. level Cooling Nom. Power supply Name/Phase/Frequency/Voltage Current

Recommended fuses

°CWB °CDB °CDB kg dBA dBA dBA dBA Hz/V A

006CV3 735x832x307 56

008CV3

Hermetically sealed swing compressor -25~25 10~43 -25~35 1.45

1.60 61

62 63

48 48

49 50

49 V3/1~/50/230 20

ERLQ004-008CV3

011CV3 011CW1 014CV3 014CW1 016CV3 016CW1 1,345x900x320 113 114 113 114 113 114 1 Hermetically sealed scroll compressor -25~35 10.0~46.0 10~46 10.0~46.0 10~46 10.0~46.0 10~46 -20~35 R-410A 3.4 64 66 64 66 69 51 52 50 52 54 W1/3N~/ V3/1~/ W1/3N~/ V3/1~/5 W1/3N~/ 50/400 50/230 50/400 0/230 50/400 40 20 40 20 40 20

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) EW 30°C; LW 35°C; ambient conditions: -7°CDB/-8°CWB (4) EW 30°C; LW 35°C; ambient conditions: 2°CDB/1°CWB

80

volledig zwart Daikin logo

81

EHBH-CB + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHBH 08CB3V / 08CB3V / 04CB3V + 08CB9W 08CB9W + 004CV3 ERLQ + 006CV3 + 008CV3

Efficiency data Heating capacity

Power input

EHBH-CB

Min. Nom.

kW kW

Max.

kW

Heating

Nom.

kW

Max.

kW

4.40 (1) / 4.03 (2) 5.12 (1) / 4.90 (2) 0.87 (1) / 1.13 (2)

1.80 (1) / 1.80 (2) 6.00 (1) / 7.40 (1) / 5.67 (2) 6.89 (2) 8.35 (1) / 10.02 (1) / 7.95 (2) 9.53 (2) 1.27 (1) / 1.66 (1) / 1.59 (2) 2.01 (2) -

Nominal efficiency COP 5.04 (1) / 3.58 (2)

Indoor unit Colour Material Dimensions Unit Weight Unit Sound power level Cooling Sound pressure level Cooling

EHBH

4.74 (1) / 3.56 (2)

4.45 (1) / 3.42 (2)

08CB3V / 08CB9W

04CB3V

Outdoor unit Dimensions Weight Operation range

Nom.

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Heating Nom./Silent operation Sound pressure Heating level Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

mm kg dBA dBA ERLQ mm kg °CDB °CWB

41

11CB3V / 11CB9W +011CV3

16CB3V / 16CB9W +014CV3

16CB3V / 16CB9W + 016CV3

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4)

16CB3V / 16CB9W White Precoated sheet metal 890x480x344 43 44

43 40 26

004CV3 54

11CB3V / 11CB9W + 011CW1

16CB3V / 16CB9W + 014CW1

16CB3V / 16CB9W + 016CW1

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4)

-

11CB3V / 11CB9W

Casing

HeightxWidthxDepth

ERLQ004CV3

11CB3V / 11CB9W

16CB3V / 16CB9W

43

44

-

006CV3 008CV3 735x832x307 56 -25~25 -25~35

011CV3

014CV3

016CV3 011CW1 1,345x900x320

014CW1

113

016CW1

114 -25~35 -20~35

R-410A kg dBA dBA Hz / V A

1.45

1.60

3.4

61

62

64

66

48

49

51

52

V3/1~/50/230 20

40

64

66

51

52

W1/3N~/50/400 20

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) Condition 3: heating Ta DB -7°C (RH85%) - LWC 35°C (4) Condition 4: heating Ta DB -7°C (RH85%) - LWC 45°C

82

EHBH-CB + ERHQ-BV3/BW1

Daikin Altherma low temperature split EHBH + ERHQ

Efficiency data Heating capacity Nom. Power input Heating Nominal efficiency COP

11CB3V / 11CB9W + 011BV3

16CB3V / 16CB9W + 014BV3

16CB3V / 16CB9W + 016BV3

EHBH

11CB3V / 11CB9W

Outdoor unit Dimensions Weight Operation range

Nom.

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Heating Sound pressure level Heating Nom. Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

mm kg dBA dBA ERHQ mm kg °CDB °CWB kg dBA dBA Hz / V A

11CB3V / 11CB9W

16CB3V / 16CB9W

Casing

HeightxWidthxDepth

11CB3V / 11CB9W + 011BW1

ERHQ-BV3

16CB3V / 16CB9W + 014BW1

16CB3V / 16CB9W + 016BW1

kW 11.2 (1) / 10.3 (2) 14.0 (1) / 13.1 (2) 16.0 (1) / 15.2 (2) 11.32 (1) / 10.98 (2) 14.50 (1) / 13.57 (2) 16.05 (1) / 15.11 (2) kW 2.55 (1) / 3.17 (2) 3.26 (1) / 4.04 (2) 3.92 (1) / 4.75 (2) 2.63 (1) / 3.24 (2) 3.42 (1) / 4.21 (2) 3.82 (1) / 4.69 (2) 4.39 (1) / 3.25 (2) 4.29 (1) / 3.24 (2) 4.08 (1) / 3.20 (2) 4.30 (1) / 3.39 (2) 4.24 (1) / 3.22 (2) 4.20 (1) / 3.22 (2)

Nom.

Indoor unit Colour Material Dimensions Unit Weight Unit Sound power level Cooling Sound pressure level Cooling

EHBH-CB

43

44

011BV3

014BV3 1,170x900x320 103 -20~35

16CB3V / 16CB9W

White Precoated sheet metal 890x480x344 43 016BV3

011BW1

44

014BW1 1,345x900x320 108 -25~35

016BW1

-20~35 R-410A 2.7 64 49

51 V3/1~/50/230 32

66 53

2.95 64 51 W1/3N~/50/400 20

66 52

(1)DB/WB 7°C/6°C - LWC 35°C (DT=5°C) - (2) DB/WB 7°C/6°C - LWC 45°C (Dt=5°C)

83

EHBX-CB + ERLQ-CV3/CW1

Daikin Altherma low temperature split EHBX + ERLQ

Efficiency data Heating capacity

Cooling capacity

EHBX-CB

Min. Nom.

kW kW

Max.

kW

Min. Nom.

Power input

Heating

Cooling

Nom.

kW

Max.

kW

Nom.

kW

08CB3V / 08CB9W + 006CV3

08CB3V / 08CB9W + 008CV3

11CB3V / 11CB9W + 011CV3

14CB3V / 14CB9W + 014CV3

16CB3V / 16CB9W + 016CV3

1.80 (1) / 1.80 (2) 6.00 (1) / 7.40 (1) / 5.67 (2) 6.89 (2) 8.35 (1) / 10.02 (1) / 7.95 (2) 9.53 (2)

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4)

12.13 (1) / 11.72 (2) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 3.05 (1) / 4.31 (2) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4) 3.98 (1) / 2.72 (2)

12.72 (1) / 12.55 (2) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 3.21 (1) / 5.08 (2) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4) 3.96 (1) / 2.47 (2)

13.79 (1) / 13.12 (2) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 3.74 (1) / 5.73 (2) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4) 3.69 (1) / 2.29 (2)

04CB3V + 004CV3 4.40 (1) / 4.03 (2) 5.12 (1) / 4.90 (2) 2.00 (1) / 2.00 (2) 4.08 (1) / 4.17 (2) 0.87 (1) / 1.13 (2)

6.20 (1) / 5.36 (2) 1.66 (1) / 2.01 (2)

0.90 (1) / 1.80 (2)

1.51 (1) / 2.07 (2)

1.64 (1) / 2.34 (2)

5.04 (1) / 3.58 (2)

4.74 (1) / 3.56 (2)

4.45 (1) / 3.42 (2)

4.55 (1) / 2.32 (2)

3.89 (1) / 2.34 (2)

3.79 (1) / 2.29 (2)

Nominal efficiency COP

EER

Indoor unit Colour Material Dimensions Unit Weight Unit Sound power level Cooling Sound pressure level Cooling

EHBX

08CB3V / 08CB9W

04CB3V

Casing

Outdoor unit Dimensions Weight Operation range

HeightxWidthxDepth

Nom.

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Cooling Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Cooling Heating Nom./Silent operation Sound pressure Cooling level Heating Nom. Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

mm kg dBA dBA

42

44

004CV3

kg dBA dBA dBA dBA Hz / V A

1.45

54

16CB3V / 16CB9W + 014CW1

16CB3V / 16CB9W + 016CW1

11.2 (1) / 11.00 (2) 8.6 (3) / 8.60 (4)

14.5 (1) / 13.60 (2) 10.6 (3) / 10.80 (4)

16 (1) / 15.20 (2) 11.4 (3) / 10.90 (4)

12.13 (1) / 11.72 (2) 2.43 (1) / 3.10 (2) 3.13 (3) / 4.10 (4) 3.05 (1) / 4.31 (2) 4.6 (1) / 2.75 (3) / 3.55 (2) / 2.10 (4) 3.98 (1) / 2.72 (2)

12.72 (1) / 12.55 (2) 3.37 (1) / 4.10 (2) 4.00 (3) / 5.19 (4) 3.21 (1) / 5.08 (2) 4.3 (1) / 2.65 (3) / 3.32 (2) / 2.08 (4) 3.96 (1) / 2.47 (2)

13.79 (1) / 13.12 (2) 3.76 (1) / 4.66 (2) 4.32 (3) / 5.22 (4) 3.74 (1) / 5.73 (2) 4.25 (1) / 2.64 (3) / 3.26 (2) / 2.09 (4) 3.69 (1) / 2.29 (2)

-

11CB3V / 11CB9W

16CB3V / 16CB9W White Precoated sheet metal 890x480x344 43 44

40 26

ERLQ mm kg °CDB °CWB °CWB

11CB3V / 11CB9W + 011CW1 -

2.50 (1) / 2.50 (2) 5.88 (1) / 4.84 (2) 1.27 (1) / 1.59 (2)

ERLQ004-008CV3

11CB3V / 11CB9W

16CB3V / 16CB9W

43

44

-

006CV3 008CV3 735x832x307 56 -25~25 10~43 -25~35

011CV3

014CV3

016CV3 011CW1 1,345x900x320

014CW1

113

016CW1

114 -25~35

10.0~46.0

10~46 -20~35

R-410A 1.60 61

64

63

64

49

49 50 50 V3/1~/50/230

48 48

3.4 62

20

66 51 52 40

66 69 52 54

64 64

66 51

50

52 W1/3N~/50/400 20

66 69 52 54

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) Condition 3: heating Ta DB -7°C (RH85%) - LWC 35°C (4) Condition 4: heating Ta DB -7°C (RH85%) - LWC 45°C

84

EHBX-CB + ERHQ-BV3/BW1

Daikin Altherma low temperature split EHBX + ERHQ

Efficiency data Heating capacity Cooling capacity Power input

Nom. Nom. Heating Cooling Nominal efficiency COP EER

Nom. Nom.

Indoor unit Colour Material Dimensions Unit Weight Unit Sound power level Cooling Sound pressure level Cooling

EHBX-CB

kW kW kW kW

EHBX

11CB3V / 11CB9W + 011BV3

16CB3V / 16CB9W + 014BV3

16CB3V / 16CB9W + 016BV3

11CB3V / 11CB9W + 011BW1

16CB3V / 16CB9W + 014BW1

16CB3V / 16CB9W + 016BW1

11.2 (3) / 10.30 (4) 13.9 (2) / 10.0 (1) 2.55 (3) / 3.17 (4) 3.86 (2) / 3.69 (1) 4.39 (3) / 3.25 (4) 3.60 (2) / 2.71 (1)

14.0 (3) / 13.1 (4) 17.3 (2) / 12.5 (1) 3.26 (3) / 4.04 (4) 5.86 (2) / 5.39 (1) 4.29 (3) / 3.24 (4) 2.95 (2) / 2.32 (1)

16.0 (3) / 15.2 (4) 17.8 (2) / 13.1 (1) 3.92 (3) / 4.75 (4) 6.87 (2) / 5.95 (1) 4.08 (3) / 3.20 (4) 2.59 (2) / 2.20 (1)

11.32 (1) / 10.98 (2) 15.05 (1) / 11.72 (2) 2.63 (1) / 3.24 (2) 4.53 (1) / 4.31 (2) 4.30 (1) / 3.39 (2) 3.32 (1) / 2.72 (2)

14.50 (1) / 13.57 (2) 16.06 (1) / 12.55 (2) 3.42 (1) / 4.21 (2) 5.43 (1) / 5.08 (2) 4.24 (1) / 3.22 (2) 2.96 (1) / 2.47 (2)

16.05 (1) / 15.11 (2) 16.76 (1) / 13.12 (2) 3.82 (1) / 4.69 (2) 6.16 (1) / 5.73 (2) 4.20 (1) / 3.22 (2) 2.72 (1) / 2.29 (2)

11CB3V / 11CB9W

16CB3V / 16CB9W

Casing

Outdoor unit Dimensions Weight Operation range

HeightxWidthxDepth

Nom.

Unit HeightxWidthxDepth Unit Heating Ambient Min.~Max. Cooling Ambient Min.~Max. Domestic hot water Ambient Min.~Max. Refrigerant Type Charge Sound power level Heating Cooling Sound pressure Heating Nom. level Cooling Nom. Power supply Phase / Frequency / Voltage Current - 50Hz Maximum fuse amps (MFA)

mm kg dBA dBA ERHQ mm kg °CDB °CDB °CWB kg dBA dBA dBA dBA Hz / V A

ERHQ-BV3

11CB3V / 11CB9W

16CB3V / 16CB9W

White Precoated sheet metal 890x480x344 43

44

43

44

011BV3

014BV3 1,170x900x320 103 -20~35

016BV3

011BW1

014BW1 1,345x900x320 108 -25~35

016BW1

10~46 -20~35 R-410A 2.7 64 64 49 50

66 51 52 V3/1~/50/230 32

2.95 66 69 53 54

64 64

66 51

50

52 W1/3N~/50/400 20

66 69 52 54

(1)DB/WB 7°C/6°C - LWC 35°C (DT=5°C) - (2) DB/WB 7°C/6°C - LWC 45°C (Dt=5°C) (3) Condition 3: heating Ta DB -7°C (RH85%) - LWC 35°C (4) Condition 4: heating Ta DB -7°C (RH85%) - LWC 45°C

85

EKCB(H/X)-BC+EBHQ-BBV3

Daikin Altherma low temperature monobloc Single Unit Heating capacity Cooling capacity Power input

Nom. Nom. Cooling Heating

COP EER Dimensions

Unit

Weight Operation range

Unit Heating Cooling

Domestic hot water Indoor installation Refrigerant Type Charge Sound power level Heating Cooling Sound pressure Heating level Cooling Compressor Main power component supply

EBHQ kW kW kW kW

Nom. Nom.

Height Width Depth Depth with remocon mounted on front plate Ambient Water side Ambient Water side Ambient Water side Ambient

Nom. Nom. Nom. Nom. Name Phase Frequency Voltage

Min.~Max. Min.~Max. Min.~Max. Min.~Max. Min.~Max. Min.~Max. Min. Max.

EKCB(H/X)-BCV3

006BBV3 6.00 (2) / 5.58 (4) 7.00 (1) / 5.12 (3) 2.20 (1) / 2.16 (3) 1.41 (2) / 1.79 (4) 4.26 (2) / 3.11 (4) 3.18 (1) / 2.37 (3)

mm mm mm mm kg °CWB °C °CDB °C °CDB °C °CDB °CDB kg dBA dBA dBA dBA

Hz V

008BBV3 8.85 (2) / 8.15 (4) 8.37 (1) / 6.08 (3) 2.97 (1) / 2.75 (3) 2.21 (2) / 2.72 (4) 4.00 (2) / 3.00 (4) 2.82 (1) / 2.21 (3) 805 1,190 360

EKCB(H/X) 008BCV3 390 412 100

-

120

95 -15~25 15~50 (5) 10~43 5~22 -15~35 25~80 R-410A 1.7

6 -~-~-~-~-~-~4 35 -

61

62 63

48 48

49 50 V3 1~ 50 230

(1) Tamb 35°C - LWE 18°C (DT=5°C) (2) DB/WB 7°C/6°C - LWC 35°C (DT=5°C) (3) Tamb 35°C - LWE 7°C (DT=5°C) (4) DB/WB 7°C/6°C - LWC 45°C (Dt=5°C) (5) 15°C-25°C: BUH only, no heat pump operation = during commisioning

86

EBHQ-BBV3

EB(L/H)Q-BB6V3/W1

Daikin Altherma low temperature monobloc Single Unit Heating capacity Cooling capacity Power input

Nom. Nom. Cooling Heating

COP EER Dimensions

Unit

Weight Hydraulic component Operation range

Unit Back-up heater current Heating Cooling

Domestic hot water Refrigerant Type Charge Sound power level Heating Cooling Sound pressure Heating level Cooling Compressor Main power component supply

Nom. Nom.

EBLQ/EBHQ kW kW kW kW

Height Width Depth

EB(L/H)Q-BB

011BB6V3 11.20 (1) / 10.87 (2) 12.85 (1) / 10.00 (2) 3.87 (1) / 3.69 (2) 2.56 (1) / 3.31 (2) 4.38 (1) / 3.28 (2) 3.32 (1) / 2.71 (2)

014BB6V3 14.00 (1) / 13.10 (2) 15.99 (1) / 12.50 (2) 5.75 (1) / 5.39 (2) 3.29 (1) / 4.01 (2) 4.25 (1) / 3.27 (2) 2.78 (1) / 2.32 (2)

mm mm mm kg

Type Power supply Phase/Frequency/Voltage Ambient Min.~Max. Water side Min.~Max. Ambient Min.~Max. Water side Min.~Max. Ambient Min.~Max. Water side Min.~Max.

6V3 1~/50/230 -20~35 (EBLQ)/-15~35 (EBHQ)

Hz/V °CWB °C °CDB °C °CDB °C kg dBA dBA dBA dBA

Nom. Nom. Nom. Nom. Name Phase Frequency Voltage

016BB6V3 011BB6W1 16.00 (1) / 15.06 (2) 11.20 (1) / 10.87 (2) 16.73 (1) / 13.10 (2) 12.85 (1) / 10.00 (2) 6.36 (1) / 5.93 (2) 3.87 (1) / 3.69 (2) 3.88 (1) / 4.71 (2) 2.60 (1) / 3.21 (2) 4.12 (1) / 3.20 (2) 4.31 (1) / 3.38 (2) 2.63 (1) / 2.21 (2) 3.32 (1) / 2.71 (2) 1,418 1,435 382 180

014BB6W1 14.00 (1) / 13.10 (2) 15.99 (1) / 12.50 (2) 5.40 (1) / 5.06 (2) 3.30 (1) / 4.07 (2) 4.24 (1) / 3.22 (2) 2.96 (1) / 2.47 (2)

016BB6W1 16.00 (1) / 15.06 (2) 16.73 (1) / 13.10 (2) 6.15 (1) / 5.75 (2) 3.81 (1) / 4.66 (2) 4.20 (1) / 3.23 (2) 2.72 (1) / 2.28 (2)

6W1 3~/50/400 -25~35 (EBLQ)/-15~35 (EBHQ) 15~55 (3) 10~46 5~22

-20~43 (EBLQ)/-15~43 (EBHQ)

-25~43 (EBLQ)/-15~43 (EBHQ) 25~80 R-410A 2.95

64 65

65 66

66 69 52 54

51 50

52 V3 1~

Hz V

64 65 49 50

65 66 51 52 W1 3N~

66 69 53 54

50 230

400

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) 15°C-25°C: BUH only, no heat pump operation = during commisioning

ED(L/H)Q-BB6V3/W1

Daikin Altherma low temperature monobloc Single Unit Heating capacity Power input COP Dimensions

Weight Hydraulic component Operation range

Nom. Heating Unit

Unit Back-up heater current Heating

Domestic hot water Refrigerant Type Charge Sound power level Heating Sound pressure level Heating Compressor Main power component supply

Nom.

EDLQ/EDHQ kW kW

Height Width Depth Type Power supply Phase/Frequency/Voltage Ambient Min.~Max. Water side Min.~Max. Ambient Min.~Max. Water side Min.~Max.

Nom. Nom. Name Phase Frequency Voltage

ED(L/H)Q-BB

011BB6V3 11.20 / 10.87 2.56 / 3.31 4.38 / 3.28

014BB6V3 14.00 / 13.10 3.29 / 4.01 4.25 / 3.27

016BB6V3 16.00 / 15.06 3.88 / 4.71 4.12 / 3.20

mm mm mm kg 6V3 1~/50/230 -20~35 (EDLQ)/-15~35 (EDHQ)

016BB6W1 16.00 / 15.06 3.81 / 4.66 4.20 / 3.23

6W1 3~/50/400 -25~35 (EDLQ)/-15~35 (EDHQ) 15~55

-20~43 (EDLQ)/-15~43 (EDHQ)

-25~43 (EDLQ)/-15~43 (EDHQ) 25~80 R-410A 2.95

64

65 51

66 52

64 49

V3 1~ Hz V

014BB6W1 14.00 / 13.10 3.30 / 4.07 4.24 / 3.22

1,418 1,435 382 180

Hz/V °CWB °C °CDB °C kg dBA dBA

011BB6W1 11.20 / 10.87 2.60 / 3.21 4.31 / 3.38

65 51 W1 3N~

66 53

50 230

400

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) 15°C-25°C: BUH only, no heat pump operation = during commisioning

87

Tanks and solar for Daikin Altherma low temperature EKHWP-B

Plastic domestic hot water tank with solar support Accessory Dimensions Weight Tank

Heat exchanger

Unit

Width Depth Empty

Unit Water volume Maximum water temperature Insulation Heat loss Domestic hot Tube material water Face area Internal coil volume Operating pressure Average specifc thermal output Charging Tube material Face area Internal coil volume Operating pressure Average specifc thermal output Auxiliary solar Tube material heating Face area Internal coil volume Operating pressure Average specifc thermal output

EKHWP300B

EKHWP mm mm kg l °C kWh/24h

300B 595 615 59 300

500B 790 790 93 500 85

1.3

1.4 Stainless steel

m² l bar W/K

5.8 27.9

6 29 6

2,790

2,900 Stainless steel

m² l bar W/K

2.7 13.2

3.8 18.5 3

1,300

1,800 Stainless steel

m² l bar W/K

-

0.5 2.3 3

-

280

EKHWS-B

Stainless steel domestic hot water tank Accessory Casing Dimensions Weight Tank

Heat exchanger Booster heater Power supply

88

EKHWS-B

EKHWS Colour Material Unit

Width Depth Empty

Unit Water volume Material Maximum water temperature Insulation Heat loss Quantity Tube material Capacity Phase/Frequency/Voltage

150B3V3

200B3V3

mm mm kg l

37 150

45 200

°C kWh/24h

1.55

1.77

kW Hz/V

1~/50/230

300B3V3 Neutral white Epoxy-coated mild steel 580 580 59 300 Stainless steel (DIN 1.4521) 85 2.19 1 Duplex steel LDX 2101 3

200B3Z2

300B3Z2

45 200

59 300

1.77

2.19

2~/50/400

EKHWE-A

Enameled domestic hot water tank Accessory Casing Dimensions Weight Tank

Booster heater Power supply

EKHWE200A

EKHWE Colour Material Unit Diameter Unit Empty Water volume Material Maximum water temperature Insulation Heat loss Capacity Phase/Frequency/Voltage

mm kg l 째C kWh/24h kW Hz/V

150A3V3

200A3V3

545 80 150 Enamel coated steel acc. DIN4753TL2 1.7

104 200

300A3V3 RAL9010 Epoxy coated steel 660 140 300

200A3Z2

300A3Z2

545 104 200

660 140 300

1.9

2.5

1.9

75 2.5 3.0

1~/50/230

2~/50/400

EKSRPS

Pump station Accessory Mounting Dimensions Control Power supply Sensor

Unit HeightxWidthxDepth Type Power consumption Voltage Solar panel temperature sensor Storage tank sensor Return flow sensor Feed temperature and flow sensor

EKSRPS3

mm W V

EKSRPS3 On side of tank 815x230x142 Digital temperature difference controller with plain text display 2 230 Pt1000 PTC PTC Voltage signal (3.5V DC)

EKSOLHW

Solar connection Accessory Dimensions Unit HeightxWidthxDepth Weight Unit Operation range Ambient temperature Min.~Max. Sound pressure level Nom. Power supply Phase/Frequency/Voltage Power supply intake

EKSOLHW

mm kg 째C dBA Hz/V

EKSOLHW 770x305x270 8 1~35 27 1~/50/220-240 Indoor unit

EKSR3P

Wired remote control for pump station EKSRDS1A Accessory Mounting Dimensions Control Power supply Sensor

Unit HeightxWidthxDepth Type Power consumption Voltage Solar panel temperature sensor Storage tank sensor Return flow sensor Feed temperature and flow sensor

mm W V

EKSR3PA On wall 332x230x145 Digital temperature difference controller with plain text display 2 230 Pt1000 PTC PTC Voltage signal (3.5V DC)

89

EKS(H/V)-P

Solar collector Accessory Dimensions Weight Volume Surface

Unit Unit

EKSH-P

HeightxWidthxDepth

Outer Aperture Absorber

Coating Absorber Glazing Allowed roof angle Min.~Max. Operating pressure Max. Stand still temperature Max.

mm kg l m² m² m²

° bar °C

EKSV21P EKSV26P EKSH26P 2,000x1,006x85 2,000x1,300x85 1,300x2,000x85 35 42 1.3 1.7 2.1 2.01 2.6 1.79 2.35 1.8 2.36 Micro-therm (absorption max. 96%, Emission ca. 5% +/-2%) Harp-shaped copper pipe register with laser-welded highly selective coated aluminium plate Single pane safety glass, transmission +/- 92% 15~80 6 200

Options for Daikin Altherma low temperature

EKRTR/EKRTW

Wired and wireless remote control Accessory

Weight

EKRTR 1 Thermostat Receiver Thermostat Receiver Storage Operation Heating Cooling

Ambient temperature Temperature setting range Clock Regulation function Power supply Thermostat Receiver Frequency Phase Connection Thermostat Receiver Maximum distance Indoor to receiver Outdoor

90

EKRTWA

HeightxWidthxDepth HeightxWidthxDepth

Min./Max. Min./Max. Min./Max. Min./Max.

Voltage Voltage

mm mm g g °C °C °C °C

V V Hz

m m

EKRTR

EKRTWA 87x125x34

170x50x28 210 125

-x-x215 -

-20/60 0/50 4/37 4/37 Yes Proportional band Battery powered 3x AA-LRG (alkaline) Battery powered 3* AA-LR6 (alkaline) 230 50 1~ Wireless Wired Wired approx.30m approx.100m -

FWXV-A

Heat pump convector Indoor Unit Heating capacity Cooling capacity

FWXV Total capacity Nom. kW Total capacity Nom. kW Sensible capacity Nom. kW Power input Heating Nom. kW Cooling Nom. kW Dimensions Unit HeightxWidthxDepth mm Weight Unit kg mm/inch Piping connections Drain/OD/Inlet/Outlet Sound pressure Heating Nom. dBA level Cooling Nom. dBA Power supply Phase/Frequency/Voltage Hz/V

ARC452A15

15A 1.5 1.2 0.98 0.013 0.013

FWXV-A

20A 2.0 1.7 1.4 0.015 0.015 600x700x210 15 18/G 1/2/G 1/2

19 19

29 29 1~/50/60/220-240/220

91

3. Daikin Altherma high temperature split EKHBRD-ACV1/Y1 + ER(R/S)Q-AV1/AY1/EMRQ-A

Daikin Altherma high temperature split Efficiency data Heating capacity

Nom.

Power input

Heating

Nom.

COP

Indoor Unit Casing Dimensions Weight Operation range

Sound pressure level

ER(R/S)Q-AV1/Y1

EKHBRD_ACV1/Y1

EMRQ14-16A

011ACV1 014ACV1 016ACV1 011ACV1 014ACV1 016ACV1 011ACY1 014ACY1 016ACY1 011ACY1 014ACY1 016ACY1 EKHBRD + ERSQ + ERSQ + ERSQ + ERRQ + ERRQ + ERRQ + ERSQ + ERSQ + ERSQ + ERRQ + ERRQ + ERRQ 011AV1 014AV1 016AV1 011AV1 014AV1 016AV1 011AY1 014AY1 016AY1 011AY1 014AY1 016AY1 kW 11 (3) / 14 (3) / 16 (3) / 11 (3) / 14 (3) / 16 (3) / 11 (3) / 14 (3) / 16 (3) / 11 (3) / 14 (3) / 16 (3) / 11 (4) / 14 (4) / 16 (4) / 11 (4) / 14 (4) / 16 (4) / 11 (4) 14 (4) 16 (4) 11 (4) 14 (4) 16 (4) 11 (5) 14 (5) 16 (5) 11 (5) 14 (5) 16 (5) kW 3.57 (3) / 4.66 (3) / 5.57 (3) / 3.57 (3) / 4.66 (3) / 5.57 (3) / 3.57 (3) / 4.66 (3) / 5.57 (3) / 3.57 (3) / 4.66 (3) / 5.57 (3) / 4.40 (4) / 5.65 (4) / 6.65 (4) / 4.40 (4) / 5.65 (4) / 6.65 (4) / 4.40 (4) 5.65 (4) 6.65 (4) 4.40 (4) 5.65 (4) 6.65 (4) 2.61 (5) 3.55 (5) 4.31 (5) 2.61 (5) 3.55 (5) 4.31 (5) 3.08 (3) / 3.00 (3) / 2.88 (3) / 3.08 (3) / 3.00 (3) / 2.88 (3) / 3.08 (3) / 3.00 (3) / 2.88 (3) / 3.08 (3) / 3.00 (3) / 2.88 (3) / 2.50 (4) / 2.48 (4) / 2.41 (4) / 2.50 (4) / 2.48 (4) / 2.41 (4) / 2.50 (4) 2.48 (4) 2.41 (4) 2.50 (4) 2.48 (4) 2.41 (4) 4.22 (5) 3.94 (5) 3.72 (5) 4.22 (5) 3.94 (5) 3.72 (5)

EKHBRD 011ACV1 014ACV1 016ACV1 011ACV1 014ACV1 016ACV1 011ACY1 014ACY1 016ACY1 011ACY1 014ACY1 016ACY1 Metallic grey Precoated sheet metal HeightxWidthxDepth mm 705x600x695 kg 144 147 Ambient Min.~Max. °C -20~20 Water side Min.~Max. °C 25~80 Domestic hot Ambient Min.~Max. °CDB -20~35 Water side Min.~Max. °C water 25~80 Nom. dBA 43 (1) / 45 (1) / 46 (1) / 43 (1) / 45 (1) / 46 (1) / 43 (1) / 45 (1) / 46 (1) / 43 (1) / 45 (1) / 46 (1) / 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) 46 (2) Night quiet mode Level 1 dBA 40 (1) 43 (1) 45 (1) 40 (1) 43 (1) 45 (1) 40 (1) 43 (1) 45 (1) 40 (1) 43 (1) 45 (1) Colour Material Unit Unit Heating

ERSQ ERRQ ERSQ ERRQ ERSQ/ERRQ 011AV1 014AV1 016AV1 011AV1 014AV1 016AV1 011AY1 014AY1 016AY1 011AY1 014AY1 016AY1 Unit HeightxWidthxDepth mm 1,345x900x320 Unit kg 120 Quantity 1 Type Hermetically sealed scroll compressor Operation range Heating Min.~Max. °CWB -20~20 Domestic hot water Min.~Max. °CDB -20~35 Refrigerant Type R-410A Charge kg 4.5 Sound power level Heating Nom. dBA 68 69 71 68 69 71 68 69 71 68 69 71 Sound pressure level Heating Nom. dBA 52 53 55 52 53 55 52 53 55 52 53 55 Power supply Name/Phase/Frequency/Voltage Hz/V V1/1~/50/220-440 V1/1~/50/220-240 Y1/3~/50/380-415 Current Recommended fuses A 25 16 Outdoor Unit Dimensions Weight Compressor

Outdoor Unit Heating capacity Dimensions Weight Operation range

Nom. Unit Unit Heating Domestic hot water Refrigerant Type Piping connections Liquid Suction High and low pressure gas Piping length Total piping length Sound power level Heating Sound pressure level Heating Power supply Phase/Voltage

EMRQ kW HeightxWidthxDepth mm kg Min.~Max. °CWB Ambient Min.~Max. °CDB OD OD OD OU - IU System System Nom. Nom.

Max. Equivalent Actual

mm mm mm m m m dBA dBA V

8A 22.4

10A 28

12A 33.6 1,680x1,300x765

14A 39.2

331

339 -15~20 -15~35 R-410A 12.7

9.52 19.1 15.9

22.2

13 28.6

19.1

78 58

16A 44.8

12.7 22.2

100 120 300 80 60 3~/380-415

83 62

84 63

(1) Sound levels are measured at: EW 55°C; LW 65°C; Dt 10°C; ambient conditions 7°CDB/6°CWB (2) Sound levels are measured at: EW 70°C; LW 80°C; Dt 10°C; ambient conditions 7°CDB/6°CWB (3) EW 55°C; LW 65°C; Dt 10°C; ambient conditions 7°CDB/6°CWB (4) EW 70°C; LW 80°C; Dt 10°C; ambient conditions 7°CDB/6°CWB (5)EW 30°C; LW 35°C; Dt 5°C; ambient conditions 7°CDB/6°CWB (ERSQ only)

92

Tanks and solar for Daikin Altherma high temperature

EKHTS-AC

Domestic hot water tank Accessory Casing Dimensions

Weight Tank

Heat exchanger

EKHTS260AC

EKHTS Colour Material Unit

200AC

EKHTS200AC

260AC Metallic grey Galvanised steel (precoated sheet metal)

Height

Integrated on indoor unit

Width Depth Empty

Unit Water volume Material Maximum water temperature Insulation Heat loss Quantity Tube material Face area Internal coil volume

mm mm mm kg l °C kWh/24h

2,010

2,285 600 695

70 200

78 260 Stainless steel (EN 1.4521) 75

1.2

1.5 1 Duplex steel (EN 1.4162) 1.56 7.5

m² l

EKHWP-B

Plastic domestic hot water tank with solar support Accessory Dimensions Weight Tank

Heat exchanger

Unit

Width Depth Empty

Unit Water volume Maximum water temperature Insulation Heat loss Domestic hot Tube material water Face area Internal coil volume Operating pressure Average specifc thermal output Charging Tube material Face area Internal coil volume Operating pressure Average specifc thermal output Auxiliary solar Tube material heating Face area Internal coil volume Operating pressure Average specifc thermal output

EKHWP mm mm kg l °C kWh/24h

EKHWP300B

300B 595 615 59 300

500B 790 790 93 500 85

1.3

1.4 Stainless steel

m² l bar W/K

5.8 27.9

6 29 6

2,790

2,900 Stainless steel

m² l bar W/K

2.7 13.2

3.8 18.5 3

1,300

1,800 Stainless steel

m² l bar W/K

-

0.5 2.3 3

-

280

93

EKS(H/V)-P

Solar collector Accessory Dimensions Weight Volume Surface

Unit Unit

EKSH-P

HeightxWidthxDepth

Outer Aperture Absorber

Coating Absorber Glazing Allowed roof angle Min.~Max. Operating pressure Max. Stand still temperature Max.

mm kg l m² m² m²

° bar °C

EKSV21P EKSV26P EKSH26P 2,000x1,006x85 2,000x1,300x85 1,300x2,000x85 35 42 1.3 1.7 2.1 2.01 2.6 1.79 2.35 1.8 2.36 Micro-therm (absorption max. 96%, Emission ca. 5% +/-2%) Harp-shaped copper pipe register with laser-welded highly selective coated aluminium plate Single pane safety glass, transmission +/- 92% 15~80 6 200

EKSRPS

Pump station Accessory Mounting Dimensions Control Power supply Sensor

94

Unit HeightxWidthxDepth Type Power consumption Voltage Solar panel temperature sensor Storage tank sensor Return flow sensor Feed temperature and flow sensor

EKSRPS3

mm W V

EKSRPS3 On side of tank 815x230x142 Digital temperature difference controller with plain text display 2 230 Pt1000 PTC PTC Voltage signal (3.5V DC)

95

4. Daikin Altherma Flex Type

EKHVM(R/Y)D-A

Daikin Altherma Flex Type Indoor Unit Casing Dimensions Weight Operation range

EKHVMRD/EKHVMYD Colour Material Unit Unit Heating Cooling

Refrigerant Sound pressure level Power supply Current

HeightxWidthxDepth Ambient Water side Ambient Water side Ambient Water side

Min./Max. Min./Max. Min./Max. Min./Max. Min.~Max. Min./Max.

Domestic hot water Type Charge Nom. Night quiet mode Level 1 Name/Phase/Frequency/Voltage Recommended fuses

EKHVM(R/Y)D-A

50A

mm kg °C °C °CDB °C °CDB °C kg dBA dBA Hz/V A

50A Metallic grey Precoated sheet metal 705x600x695

92

80A

120 -15/20 25/80

-/-/-

10/43 5/20 -15~35 45/75 R-134a 2

40 (1) / 43 (2)

(1) Sound levels are measured at: EW 55°C; LW 65°C (2) Sound levels are measured at: EW 70°C; LW 80°C

96

80A

42 (1) / 43 (2)

40 (1) / 43 (2) 38 (1) V1/1~/50/220-240 20

42 (1) / 43 (2)

EKHBRD-ACV1/Y1

Daikin Altherma Flex Type Indoor Unit Casing Dimensions Weight Operation range

EKHBRD Colour Material Unit Unit Heating Domestic hot water

Refrigerant Sound pressure level Power supply Current

HeightxWidthxDepth Ambient Water side Ambient Water side

Min./Max. Min./Max. Min.~Max. Min./Max (booster heater)/ Max.

Type Charge Nom. Night quiet mode Level 1 Name/Phase/Frequency/Voltage Recommended fuses

EKHBRD_ACV1/Y1

011ACV1

014ACV1

mm kg °C °C °CDB °C

016ACV1 011ACY1 Metallic grey Precoated sheet metal 705x600x695

014ACY1

144

016ACY1

147 -20/20 25/80 -20~35 25/-/80

kg dBA dBA Hz/V A

43 (1) / 46 (2) 40 (1)

45 (1) / 46 (2) 43 (1) V1/1~/50/220-240 25

R-134a 2.6 46 (1) / 46 (2) 43 (1) / 46 (2) 45 (1) 40 (1)

45 (1) / 46 (2) 43 (1) Y1/3~/50/380-415 16

46 (1) / 46 (2) 45 (1)

(1) Sound levels are measured at: EW 55°C; LW 65°C; Dt 10°C; ambient conditions 7°CDB/6°CWB (2) Sound levels are measured at: EW 70°C; LW 80°C; Dt 10°C; ambient conditions 7°CDB/6°CWB

EMRQ-A

Daikin Altherma Flex Type Outdoor Unit Heating capacity Cooling capacity Casing Dimensions Weight Operation range

Nom. Nom. Colour Material Unit Unit Heating

EMRQ kW kW

HeightxWidthxDepth

Min. Max. Domestic hot water Ambient Cooling Min. Max. Refrigerant Type Charge Piping connections Liquid OD Suction OD High and low pressure gas OD Piping length OU - IU System Total piping length System Sound power level Heating Nom. Sound pressure level Heating Nom. Power supply Phase/Voltage Current Recommended fuses

Min.~Max.

Max. Equivalent Actual

EMRQ-A

8A 22.4 (1) 20 (2)

10A 28 (1) 25 (2)

mm kg °CWB °CWB °CDB °CDB °CDB kg mm mm mm m m m dBA dBA V A

12A 33.6 (1) 30 (2) Daikin White Painted galvanized steel plate 1,680x1,300x765

14A 39.2 (1) 35 (2)

331

10.3

339 -15 20 -15~35 10 43 R-410A 10.8 12.7

10.6 9.52

19.1 15.9

22.2

11.1 13 28.6

19.1

25

12.7 22.2

100 120 300 80 60 3~/380-415

78 58 20

16A 44.8 (1) 40 (2)

83 62

84 63 40

(1) Condition: Ta=7°CDB/6°CWB, 100% connection ratio (2) Condition: Ta=35°CDB, 100% connection ratio

97

Tanks for Daikin Altherma Flex Type

EKHTS-AC

Domestic hot water tank Accessory Casing Dimensions

Weight Tank

Heat exchanger

EKHTS260AC

EKHTS Colour Material Unit

200AC

EKHTS200AC

260AC Metallic grey Galvanised steel (precoated sheet metal)

Height

Integrated on indoor unit

Width Depth Empty

Unit Water volume Material Maximum water temperature Insulation Heat loss Quantity Tube material Face area Internal coil volume

mm mm mm kg l °C kWh/24h

2,010

2,285 600 695

70 200

78 260 Stainless steel (EN 1.4521) 75

1.2

1.5 1 Duplex steel (EN 1.4162) 1.56 7.5

m² l

EKHWP-B

Plastic domestic hot water tank with solar support Accessory Dimensions Weight Tank

Heat exchanger

98

Unit

Width Depth Empty

Unit Water volume Maximum water temperature Insulation Heat loss Domestic hot Tube material water Face area Internal coil volume Operating pressure Average specifc thermal output Charging Tube material Face area Internal coil volume Operating pressure Average specifc thermal output Auxiliary solar Tube material heating Face area Internal coil volume Operating pressure Average specifc thermal output

EKHWP mm mm kg l °C kWh/24h

EKHWP300B

300B 595 615 59 300

500B 790 790 93 500 85

1.3

1.4 Stainless steel

m² l bar W/K

5.8 27.9

6 29 6

2,790

2,900 Stainless steel

m² l bar W/K

2.7 13.2

3.8 18.5 3

1,300

1,800 Stainless steel

m² l bar W/K

-

0.5 2.3 3

-

280

Options for Daikin Altherma Flex Type

FWXV-A

Heat pump convector Indoor Unit Heating capacity

FWXV kW Btu/h Cooling capacity Total capacity Nom. kW Sensible capacity Nom. kW Power input Heating Nom. kW Cooling Nom. kW Dimensions Unit HeightxWidthxDepth mm Weight Unit kg mm/inch Piping connections Drain/OD/Inlet/Outlet Sound pressure Heating Nom. dBA level Cooling Nom. dBA Power supply Phase/Frequency/Voltage Hz/V Total capacity

Nom.

ARC452A15

15A 1.5 5,100 1.2 0.98 0.013 0.013

FWXV-A

20A 2.0 6,800 1.7 1.4 0.015 0.015 600x700x210 15 18/G 1/2/G 1/2

19 19

29 29 1~/50/60/220-240/220

99

5. Daikin Altherma hybrid heat pump

EHYHBH-AV32/EHYKOMB-AA2/3 + EVLQ-CV3

Daikin Altherma hybrid heat pump Efficiency data Heating capacity

Power input COP Indoor Unit Gas

Central heating

Domestic hot water Supply air Flue gas Casing Dimensions Weight Power supply Electrical power consumption Operation range

Min. Nom. Max. Heating

Nom.

EHYHBH + EVLQ kW kW kW kW

EHYHBH Consumption (G20) Min-Max m³/h Consumption (G25) Min-Max m³/h Consumption (G31) Min-Max m³/h Connection Diameter mm Heat input Qn Nom Min-Max kW (net calorific value) Output Pn at 80/60°C Min-Nom kW Efficiency Net calorific value % Operation range Min-Max °C Output Min-Nom kW Water flow Rate Nom l/min Operation range Min-Max °C Connection mm Concentric Connection mm Colour Material Unit HeightxWidthxDepth mm Unit kg Phase/Frequency/Voltage Hz/V Max. W Standby W °C Heating Ambient Min.~Max. °C Water side Min.~Max.

05AV32 + 05CV3 4.40 (1) / 4.03 (2) 5.12 (1) / 4.90 (2) 0.87 (1) / 1.13 (2) 5.04 (1) / 3.58 (2)

Unit HeightxWidthxDepth Unit Quantity Type Operation range Heating Min.~Max. Refrigerant Type Charge Sound power level Heating Nom. Sound pressure level Heating Nom. Power supply Name/Phase/Frequency/Voltage Current Recommended fuses

7.40 (1) / 6.89 (2) 10.02 (1) / 9.53 (2) 1.66 (1) / 2.01 (2) 4.45 (1) / 3.42 (2)

05AV32

08AV32 -

30

Notes

Outdoor Unit Dimensions Weight Compressor

08AV32 + 08CV3 1.80 (1) / 1.80 (2)

-

7.6-27 (3)

White

8.2-26.6 (3) 98 (4) / 107 (5) 15-80 7.6-32.7 9.0 / 15.0 40-65 100 Yes 60 White - RAL9010

Precoated sheet metal 902x450x164 31.2 -25~25 25~55 -

EVLQ mm kg

°CWB kg dBA dBA Hz/V A

05CV3

08CV3 735x832x307

54

56 1 Hermetically sealed swing compressor -25~25 R-410A 1.45 1.60 61 62 48 49 V3/1~/50/230 20

(1) Condition: Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition: Ta DB/WB 7°C/6°C - LWC 45°C (Dt=5°C) (3) Values according to G20 (4) 80/60 (5) 40/30 (30%)

100

EHYKOMB33A2/3 0.78-3.39 0.90-3.93 0.30-1.29 15

820x490x270 36 1~/50/230 55 2 For water circuit central heating, safety valve: refer to EHYHB*

EHYHBH/X-AV32 / EHYKOMB33A2/3

EHYHBX-AV3/EHYKOMB-AA2/3 + EVLQ-CV3

EVLQ-CV3

Daikin Altherma hybrid heat pump Efficiency data Heating capacity

Cooling capacity Power input

Min. Nom. Max. Min. Nom. Heating Cooling

Nom. Nom.

EHYHBX + EVLQ kW kW kW kW kW kW kW

COP EER Indoor Unit Gas

Central heating

Domestic hot water Supply air Flue gas Casing Dimensions Weight Power supply Electrical power consumption Operation range

EHYHBX Consumption (G20) Min-Max m³/h Consumption (G25) Min-Max m³/h Consumption (G31) Min-Max m³/h Connection Diameter mm Heat input Qn Nom Min-Max kW (net calorific value) Output Pn at 80/60°C Min-Nom kW Efficiency Net calorific value % Operation range Min-Max °C Output Min-Nom kW Water flow Rate Nom l/min Operation range Min/Max °C Connection mm Concentric Connection mm Colour Material Unit HeightxWidthxDepth mm Unit kg Phase/Frequency/Voltage Hz/V Max. W Standby W Heating Ambient Min.~Max. °C Water side Min.~Max. °C Cooling Ambient Min.~Max. °CDB Water side Min.~Max. °C

Notes

Outdoor Unit Dimensions Weight Compressor

Unit HeightxWidthxDepth Unit Quantity Type Operation range Heating Min.~Max. Refrigerant Type Charge Sound power level Heating Nom. Sound pressure level Heating Nom. Power supply Name/Phase/Frequency/Voltage Current Recommended fuses

08AV3 + 08CV3 1.80 (1) / 1.80 (2) 7.40 (1) / 6.89 (2) 10.02 (1) / 9.53 (2) 2.50 (1) / 2.50 (2) 6.86 (1) / 5.36 (2) 1.66 (1) / 2.01 (2) 2.01 (1) / 2.34 (2) 4.45 (1) / 3.42 (2) 3.42 (1) / 2.29 (2) 08AV3 -

EHYKOMB33A2/3 0.78-3.39 0.90-3.93 0.30-1.29 15

-

7.6-27 (3)

White

8.2-26.6 (3) 98 (4) / 107 (5) 15~80 7.6-32.7 9.0 / 15.0 40~65 100 Yes 60 White - RAL9010 Precoated sheet metal

902x450x164 31.2 -25~25 25~55 10~43 5~22 -

EVLQ mm kg

°CWB kg dBA dBA Hz/V A

820x490x270 36 1~/50/230 55 2 For water circuit central heating, safety valve: refer to EHYHB*

08CV3 735x832x307 56 1 Hermetically sealed swing compressor -25~25 R-410A 1.60 62 49 V3/1~/50/230 20

(1) Condition 1: cooling Ta 35°C - LWE 18°C (DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) (2) Condition 2: cooling Ta 35°C - LWE 7°C ( DT = 5°C); heating Ta DB/WB 7°C/6°C - LWC 45°C ( DT = 5°C ) (3) Values according to G20 (4) 80/60 (5) 40/30 (30%)

101

6. Gas condensing boiler

EKOMB(G)-A

Gas condensing boiler

EKOMB(G)-A

22A 0.58-2.29 0.22-0.87

EKOMB 28A 0.74-2.46 0.28-0.94

33A 0.75-3.39 0.28-1.29

5.6-18.7 6.2-20.8 5.4-17.8 5.9-18.5 6.0

7.1-23.7 7.9-26.3 6.9-22.8 7.6-23.4 7.6

7.2-27.3 8.0-30.3 7.1-26.3 7.8-27.1 7.7

Indoor Unit Gas

Central heating

Domestic hot water

Supply air Flue gas Casing Dimensions Weight Power supply Electrical power consumption

Consumption (G20) Min-Max Consumption (G31) Min-Max Connection Diameter Heat input Qn (net calorific value) Nom Min-Max Heat input Qn (gross calorific value) Nom Min-Max Output Pn at 80/60°C Min-Nom Output Pnc at 50/30°C Min-Nom Output at 40/30°C Min Water pressure (PMS) Max Water temperature Max Efficiency Net calorific value Heat input (net calorific value) Qnw Nom Min-Max Heat input (gross calorific value) Qnw Nom Min-Max Output Min-Nom Domestic hot water threshold Water flow Rate Nom Temperature Factory setting Operation range Min/Max Connection Concentric Connection Colour Material Unit HeightxCasingxWidthxDepth Unit weight Phase/Frequency/Voltage Max. Standby

(1) Setpoint 40°C (2) Setpoint 60°C

102

m³/h m³/h mm kW kW kW kW kW bar °C % kW kW kW l/min l/min °C °C mm

EKOMBG 28A 0.75-3.02 0.28-1.15

33A 0.78-3.39 0.30-1.29

5.5-23.3 6.1-25.9 5.4-22.7 5.9-23.8 5.9

7.2-29.1 8.0-32.3 7.1-28.4 7.7-31.1 7.7

7.5-32.7 8.3-36.3 7.4-32.1 8.2-35.0 8.2

5.5-23.3 6.1-25.9 5.9-22.7

7.2-29.1 8.0-32.3 7.7-28.4

109 7.5-32.7 8.3-36.3 8.2-32.1

12.5 (1)/ 7.5 (2)

15 (1)/ 9 (2)

650x450x240 33

710x450x240 36

15

3 90 5.6-22.1 6.2-24.6 6.1-21.0

7.1-28.0 7.9-31.1 6.6-26.2

107 7.2-32.7 8.0-36.3 7.9-31.5

10 (1)/ 6 (2)

12.5 (1)/ 7.5 (2)

15 (1)/ 9 (2)

590x450x240 30

650x450x240 33

1.5

mm

mm kg Hz/V W W

22A 0.57-2.42 0.22-0.92

10 (1)/ 6 (2) 60 -/100 Yes 60 /100 White - RAL9010 Precoated sheet metal 710x450x240 590x450x240 36 30 1~/50/230

105

80 2

103

Daikin Europe N.V. Naamloze Vennootschap Zandvoordestraat 300 · 8400 Oostende · Belgium · www.daikin.eu · BE 0412 120 336 · RPR Oostende (Responsible Editor)

ECPEN15 - 721

600 · 10/14

Daikin Europe N.V. participates in the Eurovent Certification programme for Liquid Chilling Packages (LCP), Air handling units (AHU) and Fan coil units (FCU), Check ongoing validity of certificate online: www.eurovent-certification.com or using: www.certiflash.com The present publication is drawn up by way of information only and does not constitute an offer binding upon Daikin Europe N.V. Daikin Europe N.V. has compiled the content of this publication to the best of its knowledge.

No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this publication. All content is copyrighted by Daikin Europe N.V. The present publication supersedes ECPEN14-721. Printed on non-chlorinated paper.

Prepared by La Movida, Belgium.