2.5 SIGN TYPE DRAWINGS
DURHAM COUNTY HUMAN SERVICES SIGNAGE & WAYFINDING DESIGN MADE
ISSUE DATES: 08-13-2010 06-25-2010 05-28-2010 06-03-2010
ISSUED TO PURCHASING DEPT. ISSUED FOR FINAL REVIEW ISSUED FOR COORDINATION - UPDATE ISSUED FOR COORDINATION
E1 EXTERIOR MONOLITH EXPLODED AXON- FOR REFERENCE
E1-18 E1-15 E1-17
E1-13
E1-14
E1-16
E1-10
120”
E1-12 E1-6 E1-11
E1-10
E1-13 E1-8 E1-7 E1-17 E1-18
E1-12 E1-5
E1-11 may occur
E1-16
E1-9 E1-8 E1-7 E1-_
E1-4
E1-2
E1-3
E1-1
NOTE: Design assumes structural frame welding sign post to base plate. Signage Manufacturer should discuss with designer during engineering to coordinate design intent with Contractor’s solution.
E1-14
Minimum 0.080” steel with custom bend and bent continuous offset flange powder coated - color: Red Powdercoat. Cap to be a single continuous metal piece. Seams are unacceptable.
E1-15 E1-17 E1-18
M6-M10 tamper-resistant screw fasteners to secure top cap (E1-14) to structural frame. Finish shall be same as adjacent exposed metal - powder coated red. Fasteners to be flat (countersunk). Fabricator to engineer.
E1-16
Minimum 0.080” steel with bent continuous offset flange powder coated sign cabinet side face panel - color: Red Powdercoat.
E1-10
E1-11 E1-12 E1-13
Double layer of Acrylite® Satin Ice acrylic sheet - color: Frosted (0D010 DF). Top layer shall be 0.354” dimensional laser/waterjet characters and pictograms permanently adhered to a base layer of minimum 0.098” same acrylic. Top layer shall fit through laser/waterjet cut-outs into face panels and protrude from sign face by a minimum of 3/8” and maximum of 3/4”. Minimum 0.080” steel with bent continuous offset flange powder coated sign cabinet face panel with laser/waterjet characters cut-out from face - color: Red Powdercoat
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
E1-6
4’ T5 fluorescent tube energy efficient light fixtures and bulbs. Ballasts to be located in base or top portion of frame (E1-5). Fixtures contained within metal box frame painted white.
E1-7
M6-M10 tamper-resistant screw fasteners to secure top cap (E1-14) to structural frame. Finish shall be same as adjacent exposed metal - powder coated red. Fasteners to be flat (countersunk). Fabricator to engineer.
E1-9
E1-8
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
Minimum 0.080” steel with bent continuous offset flange powder coated sign cabinet face panel color: Red Powdercoat. DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
E1-1 E1-2
Poured concrete footing with galvanized anchor bolts. Engineering shall be provided by Signage manufacturer and installer.
E1-3
Galvanized steel base plate.
E1-4
Galvanized washer and hex nut.
E1-5
Steel hollow tube structural frame with flanges welded to sides. Engineering shall be provided by Signage manufacturer and installer.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 1
10’-0” T.O. BOX
4
1
SAME
SG3
E1 MONOLITH 1A SG4
E1-14
2A SG4
12”
18”
1B SG4
2B SG4
E1-13
10’-0” (120”)
E1-16
E1-10 1
38 1/2”
SG5
E1-18 3 2C SG4
E1-17 E1-12 15”
E1-10
E1-11 E1-10 19 1/2”
5 2 SAME SG3
1C SG4
2D SG4
33 3/4”
5 3 SAME SG3
E1-8
0’-0” T.O.F.F.
2E SG4
1D SG4
E1-1
E1-1
NOTE: All seams to coordinate/align from side to side.
1
FACE PANEL ELEV. SCALE: 3/4” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
2
SECTION
3
SCALE: 3/4” = 1’-0” DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
SIDE PANEL ELEV. SCALE: 3/4” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
4
SECTION SCALE: 3/4” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 2
E1 MONOLITH 50”
2 SG-2
12”
E1-14 E1-15
1
PLAN - TOP VIEW
dimension from inside face of panel to face of light tube shall be equal or greater than the dimension from centerline of light tubes
SCALE: 1 1/2” = 1’-0”
E1-13 AIR VENT E1-5
A+
E1-16 E1-8
A
E1-7
2
AIR VENT
PLAN SECTION
E1-17
E1-6
SCALE: 1 1/2” = 1’-0”
E1-13 E1-3 E1-8
E1-5
4
E1-18
SAME
E1-16 E1-16
3
PLAN SECTION
E1-8
SCALE: 1 1/2” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
4
DETAIL E1 SCALE: 6”=1’-0” DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 3
E1-14
E1-18
E1
E1-15
E1-15
MONOLITH
R=1”
E1-17 E1-14 E1-5
1A
2A E1-17
E1-18 E1-14
E1-16
3 SAME
E1-17
E1-18
E1-17
E1-5
E1-5
LITEBOX
LITEBOX
E1-13
E1-6
E1-10
1B
2B
E1-10 E1-13 E1-12 LITEBOX
E1-17
R=1/4”
LITEBOX
2C E1-17
ALIGN/ COORDINATE WITH REMOVABLE SIDE PLATE
E1-18
E1-17
45°
1”
R=1/4”
E1-12 E1-16
3 SAME
E1-17
E1-7
E1-18
E1-11 E1-5
1C
2D
E1-3
E1-2
E1-7 E1-_
E1-11
E1-16 E1-17
E1-5 E1-18
E1-17
2
SECTION DETAIL: AIR VENT FOR COOLING SCALE: 6” = 1’-0”
E1-7 E1-3 1-1/4”
1”
E1-1
1-1/4”
1D 1
1”
ALL SIDES
E1-1
2E
SECTION DETAILS
2
SCALE: 3” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
SECTION DETAILS SCALE: 3” = 1’-0” DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 4
18”
4 1/2”
TO T.O. SIGN
6”
96
2” 30” 34”
6”
2”
84
52” 6”
2”
6”
72
4”
4 1/2”
60
12”
6” 48
2 3/4” 3” 14 1/4” 2 3/4” 3”
36
2 3/4”
E1
4 1/2”
DURHAM COUNTY HUMAN SERVICES 12”
DURHAM DURHAM COUNTY COUNTY HUMAN HUMAN SERVICES SERVICES 6”
12”
DURHAM COUNTY HUMAN SERVICES GRAPHIC LAYOUT
T34
SIGN SUMMARY - E1 DIMENSIONS
CALCULATIONS
1
D
10’-0”
1’-0”
FRONT FACE SIDE REAR
50 SF 10 SF 50 SF
SCALE: 1 1/2” = 1’-0”
DURHAM DURHAM COUNTY COUNTY HUMAN HUMAN SERVICES SERVICES
A1
Z9 A1
PUBLICPUBLIC HEALTHHEALTH PUBLICPUBLIC HEALTHHEALTH SOCIAL SOCIAL SERVICES SERVICES SOCIAL SOCIAL SERVICES SERVICES THE DURHAM THE DURHAM CENTERCENTER THE DURHAM THE DURHAM CENTERCENTER
30 1/2” TO B.O. SIGN
H
5’-0”
ELEV: GRIDS & LAYOUT
DURHAM DURHAM COUNTY COUNTY HUMAN HUMAN SERVICES SERVICES
PUBLIC HEALTH SOCIAL SERVICES THE DURHAM CENTER
W
DURHAM DURHAM COUNTY COUNTY HUMAN HUMAN SERVICES SERVICES
PUBLICPUBLIC HEALTHHEALTH PUBLICPUBLIC HEALTHHEALTH SOCIAL SOCIAL SERVICES SERVICES SOCIAL SOCIAL SERVICES SERVICES THE DURHAM THE DURHAM CENTERCENTER THE DURHAM THE DURHAM CENTERCENTER
PUBLIC HEALTH SOCIAL SERVICES THE DURHAM CENTER
P1 T23
0007 / 0012
2
0008/ 0011
ELEV: SIGN VISUALS SCALE: 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, 24 ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 5
E2
E2-15
EXTERIOR HALF MONOLITH EXPLODED AXON - FOR REFERENCE
E2-18 E2-14 E2-17 E2-12
E2-16 E2-5 E2-6
72”
E2-10
E2-11 E2-10 E2-8
E2-7
E2-7
E2-17
E2-16 E2-9 E2-8 E2-3
E2-4
E2-2
E2-18
E2-1
NOTE: Design assumes structural frame welding sign post to base plate. Signage Manufacturer should discuss with designer during engineering to coordinate design intent with Contractor’s solution.
E2-14
Minimum 0.080” steel with custom bend and bent continuous offset flange powder coated - color: Red Powdercoat. Cap to be a single continuous metal piece. Seams are unacceptable.
E2-15 E2-17 E2-18
M6-M10 tamper-resistant screw fasteners to secure top cap (E1-14) to structural frame. Finish shall be same as adjacent exposed metal - powder coated red. Fasteners to be flat (countersunk). Fabricator to engineer.
E2-16
Minimum 0.080” steel with bent continuous offset flange powder coated sign cabinet side face panel - color: Red Powdercoat.
E2-10
E2-11 E2-12 E2-13
Double layer of Acrylite® Satin Ice acrylic sheet - color: Frosted (0D010 DF). Top layer shall be 0.354” dimensional laser/waterjet characters and pictograms permanently adhered to a base layer of minimum 0.098” same acrylic. Top layer shall fit through laser/waterjet cut-outs into face panels and protrude from sign face by a minimum of 3/8” and maximum of 3/4”. Minimum 0.080” steel with bent continuous offset flange powder coated sign cabinet face panel with laser/waterjet characters cut-out from face - color: Red Powdercoat
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
E2-6
4’ T5 fluorescent tube energy efficient light fixtures and bulbs. Ballasts to be located in base or top portion of frame (E1-5). Fixtures contained within metal box frame painted white.
E2-7
M6-M10 tamper-resistant screw fasteners to secure top cap (E1-14) to structural frame. Finish shall be same as adjacent exposed metal - powder coated red. Fasteners to be flat (countersunk). Fabricator to engineer.
E2-9
E2-8
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
Minimum 0.080” steel with bent continuous offset flange powder coated sign cabinet face panel color: Red Powdercoat. DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
E2-1 E2-2
Poured concrete footing with galvanized anchor bolts. Engineering shall be provided by Signage manufacturer and installer.
E2-3
Galvanized steel base plate.
E2-4
Galvanized washer and hex nut.
E2-5
Steel angle structural frame. Engineering shall be provided by Signage manufacturer and installer. Ensure necessary internal support in sign corners for dent and impact resistance.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 6
E2
36”
HALF MONOLITH 5 SAME
E2-14
3
9”
SAME
E2-15
1
TOP ELEVATION
E2-10
SCALE: 3/4” = 1’-0” 1
5
3
SAME
SAME
6’-0” T.O.
8”
E2-17
6 1/4”
E2-14
E2-18 E2-10
72”
E2-17
1
1
2
SG10
SG9
SG9
E2-16 E2-10
E2-10
E2-12 48 1/2”
4
1 SG25
E2-8
24”
16”
2 SG25
0’-0” T.O.F.F.
E2-1
E2-1
2
FACE PANEL ELEV. SCALE: 3/4” = 1’-0”
3
4
SECTION SCALE: 3/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
SIDE PANEL ELEV. SCALE: 3/4” = 1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
5
SECTION SCALE: 3/4” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 7
E2 HALF MONOLITH dimension from inside face of panel to face of light tube shall be equal or greater than the dimension from centerline of light tubes
E2-12 air vent 3 SAME
SIM.
A+
A
E2-12 E2-16
E2-7
E2-18
air vent
E2-6
E2-11
1
PLAN SECTION
E2-5
E2-6
E2-18
SCALE: 1 1/2” = 1’-0”
E2-16 E2-8 E2-5 3 SAME
E2-16
3
DETAIL SCALE: 6” = 1’-0”
E2-18
E2-8
2
PLAN SECTION
E2-_
SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 8
E2-15
E2
E2-15
E2-5
R=1”
HALF MONOLITH E2-5
E2-17
E2-17
E2-5
E2-14
E2-16
1A
2A E2-5 E2-17
E2-17
E2-14
E2-17
3
E2-5
SAME
E2-5 E2-16 E2-18
E2-17
E2-18 E2-11
litebox E2-5
E2-10 E2-17
1B
2B
litebox E2-17
E2-18
E2-17
R=1/4”
E2-18 E2-11
45°
R=1/4”
E2-9
E2-9 3 SAME
E2-5
ALIGN/ COORDINATE WITH REMOVABLE SIDE PLATE 1”
SIM. E2-5
E2-5 E2-17
E2-17
litebox
litebox
E2-8
1C
2C
E2-7
E2-17
E2-5
E2-5
E2-11
E2-10
E2-8
E2-17
E2-7 E2-3
E2-3
3
SECTION DETAIL: AIR VENT FOR COOLING SCALE: 6” = 1’-0”
1-1/4”
1-1/4”
1”
1” E2-1
E2-1
1D 1
2D
SECTION DETAILS
2
SCALE: 6” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
SECTION DETAILS SCALE: 6” = 1’-0” DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 9
3”
12”
6”
12”
E2
3”
GRAPHIC LAYOUT
72
8”
SIGN SUMMARY - E2 DIMENSIONS
12”
60
Z9
A1
T31
A1
CALCULATIONS
W
H
D
3’-0”
6’-0”
0’-9”
FRONT FACE SIDE REAR
18 SF 4.5 SF 18 SF
16” 40”
4”
DURHAM COUNTY HUMAN DURHAM DURHAM COUNTYSERVICES COUNTY 48
4 1/2”
2”
4 1/2”
2”
36
A1
A1
4 1/2”
2”
DURHAM COUNTY HUMAN SERVICES
A1
4 1/2”
HUMAN SERVICES 24
HUMAN SERVICES P1
A1
DURHAM COUNTY HUMAN SERVICES
P1
24” 12
0007 / 0012 1
SCALE: 3” = 1’-0”
0 THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ELEV: GRIDS & LAYOUT
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
2
0008/ 0011
ELEV: SIGN VISUALS SCALE: 3/4” = 1’-0” DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 10
E3 PYLON EXPLODED AXON - FOR REFERENCE E3-11 E3-9 E3-10
E3-7
E3-5
E3-8
E3-6
E3-6
E3-8
E3-7 E3-4
E3-3 E3-2 E3-9 E3-1
NOTE: Design assumes structural frame welding sign post to base plate. Signage Manufacturer should discuss with designer during engineering to coordinate design intent with Contractor’s solution.
E3-10
E3-9 E3-11
Minimum 0.080” thick sheet steel powder coated sign cabinet top face panel with screen painted graphics (see sheet SG-14) - color: Red Powdercoat. Provide neoprene water-tight gasket between top panel and structural frame. M6-M10 tamper-resistant screw fasteners to secure sign faces to structural frame. Fasteners are concealed behind side panels (E3-7). Select fastener finish that will not react with adjacent metals. Fabricator to engineer.
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
E3-6
Minimum 0.080” steel with bent continuous offset flange powder coated sign cabinet face panel with screen painted graphics (see sheet SG-14) - color: Red Powdercoat. Fasteners are concealed behind panel (E3-7).
E3-7
Minimum 0.080” thick sheet steel powder coated sign cabinet face panel with screen painted graphics (see sheet SG-14) - color: Red Powdercoat.
E3-8
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
M6-M10 tamper-resistant screw fasteners to secure sign faces to structural frame. Finish shall be same as adjacent exposed metal - Red Powdercoat. Fasteners to be flat (countersunk). Fabricator to engineer. DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
E3-1 E3-2
Poured concrete footing with galvanized anchor bolts. Engineering shall be provided by Signage manufacturer and installer.
E3-3
Galvanized steel base plate.
E3-4
Galvanized washer and hex nut.
E3-5
Steel angle structural frame. Engineering shall be provided by Signage manufacturer and installer. Ensure necessary internal support in sign corners for dent and impact resistance.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 11
E3 PYLON 1 5
E3-11
E3-10
7’-6” T.O. PYLON
1A
1A
SG13
SG13
3
3
1 90”
1B
1B
SG13
SG13
5
PLAN - TOP VIEW SCALE: 1 1/2”” = 1’-0” 4 SAME
E3-6
E3-7
12”
1C
1C
SG13
SG13
2 SAME
12” 3
1 7 SAME 1D SG13
1D
E3-9
SIM.
SG13
SIM.
6
PLAN SECTION SCALE: 1 1/2” = 1’-0”
6 SAME
E3-7
0’-0” T.O.F.F.
E3-1
1E
1E
SG13
SG13
E3-1
E3-5 E3-9
12”
E3-8
12” E3-6
1
PANEL ELEV. SCALE: 3/4” = 1’-0”
2
SECTION SCALE: 3/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
3
PANEL ELEV.
4
SCALE: 3/4” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
PANEL ELEV.
7
SCALE: 3/4” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
DETAIL SCALE: 6” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 12
E3-11
E3-11
E3-10
E3-10
WEATHERSTRIP GASKET
WEATHERSTRIP GASKET
E3-9
E3 PYLON
E3-9 E3-5
E3-8
E3-8
E3-7
E3-6
E3-6
1A
1A
E3-9
E3-9
E3-6
E3-5
E3-8
E3-8 E3-6
E3-9
E3-9
1B
1B
E3-7
E3-5
E3-9
E3-9
E3-5
E3-6
E3-8
E3-8
1C
1C
E3-8
E3-8
E3-7 E3-2
E3-6
E3-9
E3-9
E3-4
1-1/4”
E3-5
E3-5
E3-3
E3-3 1-1/4”
1”
1”
E3-1
E3-1
GROUND
GROUND
1D 1
1D
SECTION DETAILS
2
SCALE: 6” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
SECTION DETAILS SCALE: 6” = 1’-0” DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 13
EQ. 1”
84
1”
6”
7”
DCHS
T25
P5 6”
P5
DURHAM AREA TRANSIT AUHORITY
CALCULATIONS
DATA DURHAM AREA TRANSIT AUHORITY
2
Few Gardens East Durham/ Hwy 70
15
Lorem Ipsum
Brier Creek Cntr.
(919) 485-RIDE gotriangle.org
Lorem Ipsum
3”
9” 3 1/2”
Downtown Durham
T5
V9 3 1/2”
Lorem Ipsum 3” 9”
Lorem Ipsum
DATA
P5
DURHAM AREA TRANSIT AUHORITY
3 1/2” 3 1/2”
2
1
ELEV: GRIDS & LAYOUT SCALE: 3” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
T20
V9
D
1’-0”
7’-6”
1’-0”
FRONT FACE SIDE REAR
DCHS
V9
DATA
DATA DURHAM AREA TRANSIT AUHORITY
ROUTES SERVED
2
Few Gardens East Durham/ Hwy 70
CONTENT IS V9
Downtown Terminal Page Rd.
Lorem Ipsum
Brier Creek Cntr.
T6
15
Downtown Terminal Page Rd. Brier Creek Cntr.
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
15
Lorem Ipsum
(919) 485-RIDE
V9
T20
V9
T6
V9
T8
V9
gotriangle.org
Lorem Ipsum
P1
gotriangle.org
7.5 SF 7.5 SF 7.5 SF
V9
Downtown Durham
Few Gardens East Durham/ Hwy 70
DESIGN MADE
V9
H
DURHAM AREA TRANSIT AUHORITY
(919) 485-RIDE
Lorem Ipsum
T8
W
CONTENT UNDER DEVELOPMENT AND PENDING REVIEW BY DURHAM TRANSIT AUTHORITY
SCREENPRINTED
ROUTES SERVED
Downtown Terminal 2” Page Rd.
Lorem Ipsum
48
DIMENSIONS
SCREENPRINTED
7”
SCREENROUTES SERVED PRINTED 6”
Downtown Durham
60
P5
12”
DATA
1”
Z15
SCREENPRINTED
DURHAM AREA TRANSIT AUHORITY
72
GRAPHIC LAYOUT SIGN SUMMARY - E3
DATA
6”
E3
1”
DCHS
12”
EQ.
1”
1”
P1
E3-01 ROUTES SERVED 2
ELEV: GRIDS & LAYOUT SCALE: 3” = 1’-0” DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
3
E3-02 MAP
ELEV SCALE: 3/4” = 1’-0” REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 14
E4/ E5 EXPLODED AXON - FOR REFERENCE E4-10 GRAPHICS
E4-9
E4-8
E4-6 E4-8
E4-7
E4-5
E4-7
E4-4 E4-3 E4-2
E4-1
E4-10
3M™ High Intensity Grade Prismatic Reflective Sheeting.
E4-7
Structural bolts to secure post to base assembly. Bolts shall be finished with either a powder coating to match post finish or galvanized.
E3-8
Sign flag shall be 1/8” sheet stock steel panel cut to size and powder coat all edges - color: Red Powdercoat. Panel shall receive a 3M printed reflective graphic (see E4-10) applied to one or both sides - varies per sign installation.
E4-9
Structural bolts to secure sign flag to sign post. Bolts to be powder coated finished to match post. Provide neoprene gaskets between screw and post.
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
E4-6
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
Steel hollow tube structural “L” shaped sign post. Seams between vertical of post and top horizontal shall be sanded and smooth. Visible seams are unacceptable. Sign post shall have shop executed cuts in upper portion to receive flag sign panels (E4-8). Top portion of sign to receive 3M reflective graphic film characters. Sign post shall be powder coated - color: Gray Powdercoat. ALL CUTS AND DRILL HOLES SHALL BE FACTORY EXECUTED AND SANDED, SMOOTH, AND FINISHED CLEAN PRIOR TO POWDER COATING.
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
E4-1 E4-2
Poured concrete footing with galvanized anchor bolts. Engineering shall be provided by Signage manufacturer and installer.
E4-3
Galvanized steel base assembly consisting of base plate and hollow steel tube shaft to fit inside sign post (E4-6). Engineering shall be provided by Signage manufacturer and installer.
E4-4 E4-5
Galvanized washer and hex nut.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 15
E4/ E5 FLAG 1 SG17
9’-6” T.O. FLAG 8”
2 SG17
2” E4-8
E4-8
9”
3
2”
SG17
84” MIN.
E4-8
9”
E4-8
NOTE: ON E5 SIGN THIS LOWER FLAG DOES NOT OCCUR, ONLY ONE FLAG.
E4-9
3
4 P2
E4-6
E4-6 E4-6
E4-3
E4-3
E4-2
E4-2
E4-3
E4-3
E4-1
E4-1
E4-7 4 SG17
E4-2 E4-3 E4-1 0’-0” T.O.F.F.
1
ELEVATION SCALE: 3/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
2
ELEVATION
3
SCALE: 3/4” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
ELEVATION SCALE: 3/4” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 16
E4/ E5 FLAG
40” EQ.
E4-6
EQ.
2”
LINE INDICATES EDGE OF TOP OF SIGN ABOVE.
EQ.
HORIZONTAL SECTION EQ.
1
HOLLOW METAL SLEEVE WELDED TO E4-6 TO RECEIVE E4-9 FASTENER. FASTENER DOES NOT EXTEND BEYOND CYLINDER.
SCALE: 1 1/2” = 1’-0”
E4-8 PROVIDE WATERTIGHT NEOPRENE GASKET BETWEEN POST AND SIGN FLAG
37”
E4-9
5
SECTION DETAIL SCALE: 6” = 1’-0”
2”
E4-7
2
HORIZONTAL SECTION
E4-6
SCALE: 1 1/2” = 1’-0”
E4-3 3”
E4-7 EQ. EQ.
2”
6
SECTION DETAIL SCALE: 6” = 1’-0”
5 SAME
0
3
5 1/4”
HORIZONTAL SECTION SCALE: 1 1/2” = 1’-0” 1” 114
8”
6”
1” 108 2”
8
16
20” +/-
24
36
DCHS T34
6
V4
P2
SAME
4
P2
HORIZONTAL SECTION SCALE: 1 1/2” = 1’-0” 96
7
ELEV: GRIDS & LAYOUT SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 17
0
S
C
16
24
36
DCHS DCHS
114
E4/ E5
ELEV: GRIDS & LAYOUT
ELEV: GRIDS & LAYOUT
SCALE: 1 1/2” = 1’-0”
SCALE: 3/8” = 1’-0”
114
Z9
8” DIA
108 108
1/2”
0
8
16
24
36
0
8
16
24
36
DCHS DCHS 8” DIA
96 114
DROP-OFF DIRECTION 108 108
84
DROP-OFF 96 (LOCATION) 96
72 72
STAFF 84 PARKING LOT 60
0013 60
72
DCHS
PUBLIC STAFF
DCHS V4
DCHS
DCHS
V4
DCHS
V3
P1
V4
DCHS
STAFF
FRONT 0010
REAR
DCHS PUBLIC
DCHS
DCHS
V4
DCHS
V3
P1
0018
DCHS
DCHS
0014
FRONT 0014
REAR
DCHS
0018
DCHS
DCHS
FRONT 0018
DCHS
REAR
DCHS
DCHS
STAFF
PUBLIC V3
V4
V4
P1
V3
V4
V4
P1
V4
V4
V3
P1
1” 1/2”
8”
DCHS
DCHS
E5 0019
0020
0019 FRONT
0020
DCHS
DCHS
REAR
1/2”
T32
72
PUBLIC PARKING LOT
0014
V4
V3
P1
V3
0018
DCHS
DCHS
DCHS
DCHS
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
0019
0019
DCHS
0014
DCHS
REAR
0017
DCHS
P1
0017 FRONT
DCHS
0013
E4 0010 11”
REAR
DCHS
0010
Z10
0017
0013 FRONT
DCHS
V4 V3 PUBLIC
0017
DCHS
DCHS STAFF
Z10
T32
2”
84
REAR
0009 1/2”
STAFF STAFF PUBLIC PUBLIC STAFF STAFF PUBLIC PUBLIC 8” DIA
60
0013
V4
8”
84
DCHS
TYP. ALL
E4 0009 0009 FRONT
96 114
60
SIGN E4-0018
P2
1”
36
DCHS
FLAG GRIDS & LAYOUT
11”
2”
PARKING DIRECTION
S
F
8
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 18
E6 AXON - FOR REFERENCE
E6-2
E6-7 GRAPHICS E6-1
E6-6 E6-5
E6-3 E6-4
E6-6
Structural barrel with epoxy set bolt to secure sign flag to post.
E6-2 E6-3 E6-4
E6-7
3M™ High Intensity Grade Prismatic Reflective Sheeting. E6-5
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
Structural anchor bolts epoxy set within building exterior wall to secure sign post to wall. Bolts shall be finished with either a powder coating to match post finIsh or galvanized. Provide neoprene gaskets between screw and post. Engineering shall be provided by Signage manufacturer and installer. Sign flag shall be 1/8” sheet stock steel panel cut to size and powder coat all edges - color: Red Powdercoat. Panel shall receive a 3M printed reflective graphic (see E6-10) applied to one side.
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
E6-1
Steel hollow tube “L” shaped sign post. Seams between vertical of post and top horizontal shall be sanded and smooth. Visible seams are unacceptable. Sign post shall have shop executed cuts in upper portion to receive flag sign panels (E4-8). Top portion of sign to receive 3M reflective graphic film characters. Sign post shall be powder coated - color: Gray Powdercoat. ALL CUTS AND DRILL HOLES SHALL BE FACTORY EXECUTED AND SANDED, SMOOTH, AND FINISHED CLEAN PRIOR TO POWDER COATING.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 19
0
40”
E6-7
T34
8
E6
16
24
36
AXON - FOR REFERENCE V4
7
36
SG17
DCHS
2 SG17
E6-1
8” E6-1
1 3/4”
P2 E6-4
1-1/2” E6-5
24
V3
SOUTH LOT: S AUTHORIZED A PARKING ONLY P
2”
3 1/2” 3” 33-1/2”
V4
3 1/2”
E6-5 24”
T28
12
3” 3 1/2” 3 SAME
0
E6-6
1
FRONT ELEV.
2
SIDE ELEV.
5
SCALE: 1 1/2” = 1’-0”
SCALE: 1 1/2” = 1’-0”
4
SCALE: 1 1/2” = 1’-0”
3/4”
SAME
3”
1/2” MIN.
37”
ELEV: GRID & LAYOUT
PROVIDE WATERTIGHT NEOPRENE GASKET BETWEEN POST AND SIGN FLAG E6-5
2”
E6-4 E6-1
E6-6
3
HORIZONTAL SECTION
3”
SCALE: 1 1/2” = 1’-0” 4
SECTION DETAIL SCALE: 6” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 20
E1/ E2/ E3/ E4/ E5/ FOOTINGS AXONS
FOOTINGS SHALL BE MIN. 3000 PSI CONCRETE SLAB FOUNDATION, SIZES VARY. SIGNAGE FABRICATOR TO ENGINEER DIMENSIONS PER SIGN AND LOCATION AND SHALL COORDINATE WITH ARCHITECT SITE CONDITIONS AND FINAL PLACEMENT. IN SITUATION OF EXISTING SIDEWALKS SIGNAGE FABRICATOR SHALL OBSERVE LOCATION OF EXISTING CONSTRUCTION JOINTS AS MUCH AS POSSIBLE TO AVOID DISRUPTION TO EXISTING SIDEWALKS. NOTE: DESIGN ASSUMES STRUCTURAL FRAME WELDING SIGN POST TO BASE PLATE. SIGNAGE MANUFACTURER SHOULD DISCUSS WITH DESIGNER DURING ENGINEERING TO COORDINATE DESIGN INTENT WITH CONTRACTOR’S SOLUTION.
1
FOOTING AXON E1
SIGN POST BASE PLATE
SIGN POST BASE PLATE
SIGN POST BASE PLATE
SIGN POST BASE FLANGE
GALVANIZED “J” ANCHOR BOLTS
GALVANIZED “J” ANCHOR BOLTS
GALVANIZED “J” ANCHOR BOLTS
GALVANIZED “J” ANCHOR BOLTS
2
FOOTING AXON E2
3
FOOTING AXON E3
4
FOOTING AXON E4/ E5
SCALE: NTS
SCALE: NTS
SCALE: NTS
SCALE: NTS
SHTS. SG1 - SG5
SHTS. SG6 - SG10
SHTS. SG11 - SG14
SHTS. SG15 - SG18
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 21
E7 WALL LETTERS & COUNTY SEAL
CENTER SEAL ON VERTICAL TILE SEAM 6”
DURHAM COUNTY HUMAN SERVICES
44 1/2”
DURHAM COUNTY HUMAN SERVICES Z8 E7-1
1
104 1/2” (8’-8 1/2”)
M2
T36
8 3/4”
EQ.
5” 8 3/4”
EQ.
M2
E7-3
ELEVATION SCALE: 1/4” = 1’-0”
3/8”
1 1/2”
2
E7-1
ENLARGED ELEV. SCALE: 1/2” = 1’-0”
URHAM COUNTY UMAN SERVICES 3
DRILL HOLE IN GRANITE AND FILL WITH EPOXY GROUT E7-1
E7-2
DURHAM COUNTY HUMAN SERVICES
SECTION THROUGH LETTER SCALE: 6” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
E7-1
Stainless steel fabricated dimensional letter. Finish shall be satin #6.
E7-2
Stainless Steel pin rod support welded to each letter. Fabricator to determine number of supports per letter and exact location. Letters shall be attached to stone safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8” diameter and shall be embedded at least 5 inches per NCB code.
E7-3
Stainless steel county seal plaque with laser-engraved or routed content and paint-filled black. Finish shall be satin #6. Set seal flush to wall. Seal shall be attached to stone safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8” diameter and shall be embedded at least 5 inches per NCB code.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 22
1 BAY
E8 (E8-01) CANOPY LETTERS
3A
3B
3C
SAME
SAME
SAME
1” STEEL CANOPY, BY OTHERS
ALIGN CENTERLINE OF SUPPORT (E8-3) WITH BLDG. FACADE MULLION.
E8-1
10 1/2”
DURHAM COUNTY HUMAN SERVICES
DURHAM COUNTY H GLASS PANEL CANOPY BY OTHERS
WEST
227.5” (18’-11 1/2”) EQ.
EQ.
EAST
ALIGN CENTER OF FULL LETTERING TO CENTERLINE OF CANOPY
DUR
E8-1
P3
E8-2
P3
E8-3
P3
1/2” 3/4”
STEEL CANOPY BY OTHERS
1
2
ELEV: E8-01
E8-1 # 2 SAME
T37
SECT: E8-01 SCALE: 3” = 1’-0”
SCALE: 1/2” = 1’-0”
P3
E8-1 11.6”
10.8”
ALIGN CENTERLINE OF SUPPORT (E8-3) WITH BLDG. FACADE MULLION.
11”
Hollow metal lettering powder coated to match architectural canopy. Canopy color may vary from main entry to side entries, coordinate with Architect. Same finish all exposed sides. Letters are welded prior to finishing to horizontal base rail (E8-2).
DUR DH UA RDM HUARCMH OA U CM N OU TCYNOTH UYU NM H TY U AM NHAUSNM ER A SV N E IRC SVEI S R CV E ISC E S E8-2
3A
3B
Hollow metal tube base rail powder coated to match E8-1.
E8-3
Metal bracket/ stand-off fastens base rail (E8-2) to Architectural canopy. Brackets/stand-offs occur along rail as shown in drawings.
3C 1/2 BAY, TYP.
E8-3
3
E8-2
ENLARGED ELEV: E8-01 SCALE: 1” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 23
E8-02/ E8-03
2 SAME
CANOPY LETTERS
E8-1
E8-1
T38
# 4 SAME
P3
16” METAL CANOPY BY OTHERS
E8-2
2
SCALE: 1” = 1’-0”
1
E8-3
ENLARGED ELEV: E8-02 1”
ELEV: E8-02 SCALE: 1/2” = 1’-0”
16”
E8-1
T38
P3
EAST
E8-1
DURHAM COU P3
METAL CANOPY BY OTHERS E8-2
P3
E8-3
P3
1/2” 3/4”
3
D U R4
ELEV: E8-03 SCALE: 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
SECT: E8-02/ E8-03
METAL CANOPY BY OTHERS
SCALE: 3” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 24
E9 EXTERIOR FACING DOOR ID
T18 T.O. CHARACTERS OF FIRST LINE
4”
V1
4”
STAFF ENTRY ONLY SECOND LINE THIRD LINE FOURTH LINE
2” 2” 2” 2”
1 1/2” 1 1/2” 1 1/2”
61”
1
ELEV: TYPICAL SCALE: 1” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 25
A SIGNS EXPLODED AXON - REFERENCE
1/8” alum band provides hang connection to A1-1 bracket.
a1-1
a1-2
a1-1 a1-2 a1-3
1
AXON SECTION
#1 SAME
a1-4
SCALE: NTS
a1-2
a1-1
Min. 1/16” bent anodized aluminum bracket with two elongated holes on vertical face for fastening to wall and a single hole in bottom bend to coordinate with flange on backside of “A” sign. The top portion is bent or welded assembly to connect to top of “A” sign.
a1-2
Phillips black oxide or other coated screw to fasten sign bracket to wall.
a1-3
Anodized aluminum flange. Single piece cut from aluminum stock, pretapped to receive A1-8 screw, and permanently adhered to backside of “A” sign.
a1-4
1/8” clear satin anodized aluminum pan sign with 3/4” returns on all sides. A 1/8” thick anodized alum. band occurs flush to top side of sign on back to provide hang connection to top of A1-1 bracket. All visible sign corners to be smooth and square. Slightly soften edge to within a 1/32” radius. DIMENSIONS VARY. LETTER & CONTENT METHOD VARY.
a1-5
Grade 2 raised braille to match anodized aluminum color/ finish. Braille should occur directly below last line of letters - see drawings for layout.
a1-6
TYPE 1 - 1/32” raised tactile Romark ADA dimensional letters TYPE 2 - Laser-engraving or routing with paint fill.
a1-3
a1-7 a1-6
a1-4
a1-5
a1-7
a1-6
LETTER & CONTENT METHOD VARY. DRAWINGS WILL NOTE WHICH TYPE OCCURS. COLOR VARIES. a1-7
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
Socket cap screw with hex or star drive. Finish is black oxide or other approved coated finish.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 26
MOUNTING BRACKETS SCREW HOLE. COORDINATE WITH SUPPORT ON BACKSIDE OF SIGN. TYPICAL BOTH ENDS.
SCRW HOLE. COORDINATE WITH SUPPORT ON BACKSIDE OF SIGN. TYPICAL BOTH ENDS.
2”
1/16”
5/8”
3”
3/4”
SCREW HOLE. COORDINATE WITH SUPPORT ON BACKSIDE OF SIGN.
1
2
AXON BRACKET 1 SCALE: NTS
3
AXON BRACKET 2 SCALE: NTS
AXON BRACKET 3
15 1/8”
SCALE: NTS
1/4”
2” 3/8”
1 3/4”
2” 7 1/4”
4A AXON
5/8”
2” 1/16”
7 1/8”
6 13/16” 2” EQ.
1/8”
3/4” EQ.
1/8R”
1 3/16”
5/8” 5/16”
1/4”
2”
5/8”
1/16”
FLANGE (SIGNS A1,A2,A3,A4,A5,A6,A7,A8) SCALE: 6”=1’-0”
3” 1 3/4”
5
ELEV.
9/16”
9/16”
1/16”
SECT.
6
BRACKET 1 (SIGNS A1,A2,A3,A4,A5,A6,A7) SCALE: 6”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ELEV.
SECT.
7
BRACKET 2 (SIGN A11) SCALE: 6”=1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
1/16”
ELEV.
SECT.
BRACKET 3 (SIGN A8, D2) SCALE: 6”=1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 27
8
E DE
0
8 0
8
8”
1”
ROOM NAME / NOMBRE DE LA SALA
8”
S5
T1
1/32” RAISED LETTERING
T2
ROOMROOM NAMENAME / NOMBRE / NOMBRE DE DE LA SALA LA SALA
T3
RESOURCE- RESOURCEJOB-LINK JOB-LINK CENTER CENTER
T1
2120 2120
MATCH TO
2120
A1
7”
ROOM PLATE 3/4”
1”
ROOM NAME / NOMBRE DE LA SALA
3/8”
T.O. BRAILLE
M1
RESOURCE- JOB-LINK CENTER
1”
M1
sharp bend 90° CORNERS softened close to 1/32” radius
3/4”
5”
RESOURCE- JOB-LINK CENTER
2120
3 1/2” 2” 1/2”
8
ARROW IS ROUTED WITH PAINT-FILL
1
ELEV: SIGN VISUAL
2
SCALE: 3”=1’-0”
A1-01 ELEV: GRIDS & LAYOUT
3
SCALE: 3”=1’-0”
a1-4
A1-02 ELEV: GRIDS & LAYOUT SCALE: 3”=1’-0”
a1-1
a1-3 # 3 SAME
# # 4 1 SG84 SAME
1/4” DIA.
1/2” Top
#
6 SAME
P5
P6
P6
ROUTED LETTERING WITH PAINT FILL
P5 ROUTED LETTERING WITH PAINT FILL
front
1/32” RAISED LETTERING
S1 1/32” RAISED LETTERING
COLOR/MATERIAL PALETTES
5
SECTION SCALE: 6”=1’-0”
M1
S2 1/32” RAISED LETTERING
M1
a1-3
Right side drilled hole for fastener screw
EQ.
M1
SECTION SCALE: 6”=1’-0”
a1-3
bottom
S4
4
lines indicate edge of alum. behind
left side
M1
5/16”
sharp bend 90° CORNERS softened close to 1/32” radius
EQ.
sharp bend 90° CORNERS softened close to 1/32” radius
S5 1/32” RAISED LETTERING
6
ELEV. - ALL FACES
7
SCALE: 3”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
sharp bend 90° CORNERS softened close to 1/32” radius
PLAN SECTION SCALE: 6”=1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 28
R
R O
16
0
16”
8
4”
1”
16
0
8 8
8”
O
0
RESOURCE JOB-LINK RESOURCECENTER /JOB-LINK RECURSOS CENTER JOB-LINK CENTRO / RECURSOS -
JOB-LINK CENTRO
8
8 8
0 T12
1
SCALE: 3”=1’-0”
1/32” RAISED LETTERING
G
M1 MATCH TO
S2
E
16
SUBLOBBY PLATE
1/2”
1/2”
M1
8
2
A2-01 ELEV: GRIDS & LAYOUT
T2
RESOURCE- JOB-LINK CENTER
1410
T1
SCALE: 3”=1’-0”
1/32” RAISED LETTERING
a1-4
1”
T3
GREEN MEADOWS MEETING ROOM GREEN MEADOWS MEETING /ROOM GREEN MEADOWS SALA DE REUNIONES / GREEN MEADOWS SALA DE REUNIONES 2002
T1
2002
T1
T2
RESOURCE- JOB-LINK CENTER
GREEN MEADOWS MEETING ROOM a1-3 GREEN MEADOWS MEETING /ROOM GREEN MEADOWS SALA DE REUNIONES / GREEN MEADOWS SALA DE REUNIONES 1/2” 2002
1”
1/2”
RESOURCE- JOB-LINK CENTER
RESOURCE- JOB-LINK CENTER
2002
RESOURCE- JOB-LINK CENTER
1/2”
RESOURCE- JOB-LINK CENTER
3
4
A2-02 ELEV: SIGN VISUAL SCALE: 3”=1’-0”
M1 MATCH TO
1/32” RAISED LETTERING
S4
M1
2002
2”
A2-02 ELEV: GRIDS & LAYOUT SCALE: 3”=1’-0”
1/32” RAISED LETTERING
4”
1/4” DIA.
RESOURCE- JOB-LINK CENTER
5/16”
sharp bend 90° CORNERS softened close to 1/32” radius
1”
S4
3/4”
JOB-LINK CENTRO
1410
1”
T3
sharp bend 90° RESOURCE CORNERS softenedCENTER close to JOB-LINK 1/32” radius RESOURCE /JOB-LINK RECURSOS CENTER JOB-LINK CENTRO / RECURSOS RESOURCE- JOB-LINK CENTER
2” 1/2”
3/4”
8 8
1”
RESOURCE- JOB-LINK CENTER
1410
8
GREEN MEADOWS MEETING ROOM GREEN MEADOWS MEETING /ROOM GREEN MEADOWS SALA DE REUNIONES / GREEN MEADOWS SALA DE REUNIONES 2002
G E
1410
T1
RESOURCE- JOB-LINK CENTER
A2-01 ELEV: SIGN VISUAL
A2
RESOURCE- JOB-LINK CENTER
1410 S4
16
RESOURCE JOB-LINK CENTER RESOURCE /JOB-LINK RECURSOS CENTER JOB-LINK CENTRO / RECURSOS JOB-LINK CENTRO
RESOURCE- JOB-LINK CENTER
1410
1”
5
# 5 # 1 SG84 SAME
SECTION SCALE: 6”=1’-0”
4”
lines indicate edge of alum. behind a1-3
# 5 SAME
drilled hole for fastener screw
M1
S1
M1
1/32” RAISED LETTERING
6
ELEV: BOTTOM FACE SCALE: 3”=1’-0”
7
a1-3
ELEV: FRONT FACE
S2
M1
1/32” RAISED LETTERING
S4
M1
1/32” RAISED LETTERING
S5 1/32” RAISED LETTERING
COLOR/MATERIAL PALETTES
SCALE: 3”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 29
CONFERENCE ROOM 24”
A3
8
8X24 3/4” sharp bend 90° CORNERS softened close to 1/32” radius
P11
8”
BETH ROSE CONFERENCE ROOM
16 1
24
A3-01 PARTIAL ELEV: SIGN VISUAL SCALE: 3”=1’-0”
P6
ROUTED LETTERING WITH PAINT FILL, TYP. ALL CONTENT
P5
2
1”
3/4”
0
1”
A3-02 PARTIAL ELEV: SIGN VISUAL SCALE: 3”=1’-0” 8
P5
ROUTED LETTERING WITH PAINT FILL
16
24 A1-4
4”
0
1”
A1-3
3-LINE NAME
Z1
1-LINE/ 2-LINE NAME
BETH ROSE CONFERENCE ROOM 5 1/2”
Z2
4”
1/2”
3
A3-01 PARTIAL ELEV: GRIDS & LAYOUT SCALE: 3”=1’-0”
8 Z3
4
# # 5 1 SG84 SAME
4”
A3-02 PARTIAL ELEV: GRIDS & LAYOUT SCALE: 3”=1’-0”
A1-3
SECTION
BETH ROSE CONFERENCE ROOM P11
A1-3
ELEVATION: SIGN VISUAL
5
SCALE: 6”=1’-0”
lines indicate edge of alum. behind 16
6
T10
4”
FRONT
5/16”
sharp bend 90° CORNERS softened close to 1/32” radius
1 1/2”
1”
1/4” DIA.
1/2”
drilled hole for fastener screw
P5 ROUTED LETTERING WITH PAINT FILL
P5
P6 ROUTED LETTERING WITH PAINT FILL
COLOR/MATERIAL PALETTES
BOTTOM
SCALE: 3”=1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 30
THIRD FLOOR
/ TERCER PISO
31 32
VITAL RECORDS LOBBY / VITAL REGISTRO LOBBY PUBLIC HEALTH ADMINISTRATIVE LOBBY / VESTÍBULO DEL PÚBLICO DE SALUD ADMINISTRATIVA
A4 60”
8X60 3/4”
THIRD SECOND FLOOR
/ TERCER SEGUNDO PISO PISER
8”
31 21 32 22 23 24 25 27 28
VITAL RECORDS / VITAL REGISTRO LOBBY DENTAL CLINIC LOBBY / CLÍNICA DENTAL PUBLIC HEALTH WOMEN’S CLINICADMINISTRATIVE / CLÍNICA DE LALOBBY MUJER / VESTÍBULO DEL PÚBLICO DE SALUD ADMINISTRATIVA NUTRITION CLINIC / NUTRICIÓN CLÍNICA OBSTETRICS ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS WORK FIRST & COMMUNITY INITIATIVES / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS THE DURHAM CENTER COUNTY WIDE MEETING ROOMS
sharp bend 90° CORNERS softened close to 1/32” radius
3/4”
1” TYP.
SECOND FIRST FLOOR
21 1 22 1 23 2 24 3 25 4 27 5 28
DENTAL CLINIC REGISTRATION / CLÍNICA DENTAL PUBLIC HEALTH / DE SALUD PÚBLICA DE REGISTRO WOMEN’S CLINICCHECK-OUT / CLÍNICA DE LA MUJERDE SALUD PÚBLICA A PUBLIC HEALTH / CONTROL NUTRITION CLINIC / NUTRICIÓN W.I.C. CLINIC / W.I.C. CLÍNICA CLÍNICA OBSTETRICSWAITING ORIENTATION ROOM /DE OBSTETRA PHARMACY / FARMACIA ESPERA ORIENTACIÓN HABITACIONES ENVIRONMENTAL HEALTH LOBBY / SALUD LOBBY LABORATORY WAITING / LABORATORIO DE AMBIENTAL ESPERA ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS WORK FIRST & COMMUNITY INITIATIVES / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS THE DURHAM CENTER COUNTY WIDE MEETING ROOMS
6
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS
11
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
PUBLIC HEALTH REGISTRATION / DE SALUD PÚBLICA DE REGISTRO PUBLIC HEALTH CHECK-OUT / CONTROL DE SALUD PÚBLICA A W.I.C. CLINIC / W.I.C. CLÍNICA PHARMACY WAITING / FARMACIA DE ESPERA LABORATORY WAITING / LABORATORIO DE ESPERA TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
6 7 8 9 10 11
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN RESOURCE - JOB-LINK CENTER / RECURSOS - JOB-LINK CENTRO MEDICAID LOBBY / RECEPCION DE MEDICAID FOOD & NUTRITION SERVICES LOBBY / LABORATORIO DE ESPERA TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
THIRD FLOOR
/ SEGUNDO PRIMER PISER PISO
8”
31 32
7 CLINIC / CLÍNICA DE VACUNACIÓN VITAL RECORDS LOBBY /IMMUNIZATION VITAL- JOB-LINK REGISTRO LOBBY 8 RESOURCE CENTER / RECURSOS - JOB-LINK CENTRO 9 MEDICAID LOBBY / RECEPCION DE MEDICAID / VESTÍBULO DEL PÚBLICO DE SALUD ADMINISTRATIVA PUBLIC HEALTH ADMINISTRATIVE LOBBY 10 FOOD & NUTRITION SERVICES LOBBY / LABORATORIO DE ESPERA
/ TERCER PISO / PRIMER
FIRST FLOOR
8”
PISO
1 1 2 3 4 5
A1-4
SIGNS FOR THE FLOOR WHERE LOCATED ARE DESIGNATED WITH REVERSE COLOR SCHEME
A1-3
FIRST FLOOR 1
1 1 2 3 4 5
- LETTERING is ROUTED WITH PUBLIC HEALTH REGISTRATION / DE SALUD PÚBLICA DE REGISTRO PUBLICFILL, HEALTHTYP. CHECK-OUT CONTROL DE SALUD PÚBLICA A PAINT ALL/ CONTENT
SECOND / PRIMER PISO FLOOR
W.I.C. CLINIC / W.I.C. CLÍNICA
21
/ SEGUNDO PISER
SCALE: 1 1/2”=1’-0”
23 24 25 27 28
11” 1”
2”
2”
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN RESOURCE - JOB-LINK CENTER / RECURSOS - JOB-LINK CENTRO MEDICAID LOBBY / RECEPCION DE MEDICAID FOOD & NUTRITION SERVICES LOBBY / LABORATORIO DE ESPERA TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
DENTAL CLINIC / CLÍNICA DENTAL / CLÍNICA DE LA MUJER NUTRITION CLINIC / NUTRICIÓN CLÍNICA OBSTETRICS ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS WORK FIRST & COMMUNITY INITIATIVES / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS 37” THE DURHAM CENTER COUNTY WIDE MEETING ROOMS
PHARMACY WAITING / FARMACIA DE ESPERA - base sign is painted, color LABORATORY WAITING / LABORATORIO 22 DE ESPERAWOMEN’S CLINIC varies TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
ELEV: SIGN VISUAL
6 7 8 9 10 11
1/4” DIA.
1/2”
5/16”
sharp bend 90° CORNERS softened close to 1/32” radius
3
SECTION SCALE: 6”=1’-0”
1”
T9
T8
FIRST FLOOR
/ PRIMER PISO
1 1 2 3 4 5
PUBLIC HEALTH REGISTRATION / DE SALUD PÚBLICA DE REGISTRO PUBLIC HEALTH CHECK-OUT / CONTROL DE SALUD PÚBLICA A W.I.C. CLINIC / W.I.C. CLÍNICA PHARMACY WAITING / FARMACIA DE ESPERA LABORATORY WAITING / LABORATORIO DE ESPERA TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
6 7 8 9 10 11
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN RESOURCE - JOB-LINK CENTER / RECURSOS - JOB-LINK CENTRO MEDICAID LOBBY / RECEPCION DE MEDICAID FOOD & NUTRITION SERVICES LOBBY / LABORATORIO DE ESPERA TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
P5
3/4” TYP.
4
FIRST FLOOR
T4
T4
/ PRIMER PISO
ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
P6
ROUTED LETTERING WITH PAINT CLINIC FILL / CLÍNICA
T5
1 PUBLIC HEALTH REGISTRATION / DE SALUD PÚBLICA DE REGISTRO 1 PUBLIC HEALTH CHECK-OUT / CONTROL DE SALUD PÚBLICA A INSTALLATION COMPOSITION 2 W.I.C. CLINIC / W.I.C. CLÍNICA SCALE: 3” = 1’-0” 3 PHARMACY WAITING / FARMACIA DE ESPERA 4 LABORATORY WAITING / LABORATORIO DE ESPERA MADE 7 WASHINGTON STREET THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL 5 TUBERCULOSIS CLINIC / CLÍNICADESIGN DE TUBERCULOSIS PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, 2ND FLOOR
P6
P5 ROUTED LETTERING WITH PAINT DEFILL SALUD DE
6 ADULT HEALTH LOS ADULTOS 7 IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN COLOR/MATERIAL PALETTES 8 RESOURCE - JOB-LINK CENTER / RECURSOS - JOB-LINK CENTRO 9 MEDICAID LOBBY / RECEPCION DE MEDICAID 10 FOOD & NUTRITION SERVICES LOBBY / LABORATORIO DE ESPERA DATE: 08 / 13 / 2010 REVISIONS:/ CLÍNICA DE TUBERCULOSIS DURHAM 11 COUNTY TUBERCULOSIS CLINIC HUMAN SERVICES WAYFINDING & SIGNAGE
08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
ISSUED FOR PROCUREMENT
SG- 31
8
RESOURCE - JOB-LINK CENTER
47 1/2”
A5 (A5-01)
/ RECURSOS - JOB-LINK CENTRO
8X48 MARKER
8
sharp bend 90° CORNERS softened close to 1/32” radius
RESOURCE - JOB-LINK CENTER
8”
3/4”
3/4”
/ RECURSOS - JOB-LINK CENTRO
1
ROUTED PUBLIC HEALTH CHECK-OUT /DISCHARGE LOBBY P5 LETTERING WITH 1 PAINT FILL, TYP. ELEVATION: SIGN VISUAL / CONTROL DE SALUD PÚBLICA A /PRESIÓN DE DESCARGA ALL CONTENT
P9 P9
ROUTED LETTERING WITH PAINT FILL
SCALE: 1 1/2”=1’-0” # # 1/3 3 SG84 SAME
24” 3 4
P5
P7
P8
P11
ROUTED LETTERING WITH PAINT FILL
P5 ROUTED LETTERING WITH PAINT FILL
COLOR/MATERIAL PALETTES
23 3/4”
W.I.C. CLINIC / W.I.C. CLÍNICA PHARMACY WAITING / FARMACIA DE ESPERA LABORATORY WAITING / LABORATORIO DE ESPERA
4”
A1-4
A1-3
5 6 FRONT 7
A1-3
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
A1-3
1/4” DIA.
1/2” BOTTOM
2
A1-3
lines indicate edge of alum. behind
ELEVATION: SIGN VISUAL SCALE: 1 1/2”=1’-0”
0
drilled hole for fastener screw
/ INFORMACIÓN INFORMATION 16 13”
8
T24
1”
3
24
36
1”
1”
RESOURCE - JOB-LINK CENTER
3 1/2”
/ RECURSOS - JOB-LINK CENTRO
1/2” TYP.
4
ELEVATION: GRIDS & LAYOUT SCALE: 3”=1’-0”
T9
8
SECTION SCALE: 6”=1’-0”
48
8
IF NAME LENGTH DOES NOT FIT, SHIFT BAck one GRID LINE
5/16”
sharp bend 90° CORNERS softened close to 1/32” radius
ALIGN BOTTOM OF TEXT TO MARGIN
T8
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
1”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
RESOURCE - JOB-LINK CENTER
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 32
8
RESOURCE - JOB-LINK CENTER
1
A5-02
/ RECURSOS - JOB-LINK CENTRO
47 1/2”
8X48 WAYFINDER
PUBLIC HEALTH CHECK-OUT /DISCHARGE LOBBY / CONTROL DE SALUD PÚBLICA A /PRESIÓN DE DESCARGA
8”
1/2”
8”
P5
2 3 4
W.I.C. CLINIC / W.I.C. CLÍNICA PHARMACY WAITING / FARMACIA DE ESPERA LABORATORY WAITING / LABORATORIO DE ESPERA
5 6 7
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
P6
ROUTED LETTERING WITH PAINT FILL
COLOR/MATERIAL PALETTES
P5
1/2”
8”
0
8
16
3 3/4”
P6
24
ROUTED LETTERING WITH PAINT FILL, TYP. ALL CONTENT
36
48 1”
1”
1
PUBLIC HEALTH CHECK-OUT /DISCHARGE LOBBY / INFORMACIÓN INFORMATION / CONTROL DE SALUD PÚBLICA A /PRESIÓN DE DESCARGA 3”
1” 0.8”
2/12”
4”
2”
ALIGN TOP OF NUMERAL TO GRID LINE
2 3 4
1”
1/2” 1 1/4”
1”
W.I.C. CLINIC / W.I.C. CLÍNICA 0.8” PHARMACY WAITING / FARMACIA DE ESPERA LABORATORY WAITING / LABORATORIO DE ESPERA 1/2” TYP.
5 6 7
T10
T6
1”
T7
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 33
A5-03 47 1/2”
INFORMATION / INFORMACIÓN
8X48 INFORMATION
8”
INFORMATION / INFORMACIÓN P5 P6
0
ROUTED LETTERING WITH PAINT FILL
13”
P6
ROUTED LETTERING WITH PAINT FILL
8
P5
ROUTED LETTERING WITH PAINT FILL
COLOR/MATERIAL PALETTES
16
1”
P6
24
36
48
4 1/2” dia.
0
1”
1 1/2”
INFORMATION / INFORMACIÓN 1/2” TYP.
4
PARTIAL ELEV: GRIDS & LAYOUT
Z5
T9
T8
1”
ALIGN BOTTOM OF TEXT TO MARGIN, SAME FOR BOTH
SCALE: 3”=1’-0”
INFORMATION / INFORMACIÓN
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 34
0
A6 8X72
INFORMATION / INFORMACIÓN
71 1/2”
3/4” sharp bend 90° CORNERS softened close to 1/32” radius
8”
INFORMATION / INFORMACIÓN
1
1
ROUTED LETTERING WITH P6 PAINT FILL PUBLIC HEALTH CHECK-OUT /DISCHARGE LOBBY P6
P5
ROUTED LETTERING WITH PAINT FILL
ELEVATION: SIGN VISUAL / CONTROL DE SALUD PÚBLICA A /PRESIÓN DE DESCARGA SCALE: 1 1/2”=1’-0”
P5
4”
# # 3 1 SG84 SAME
NOTE: SIGN A6-02 SAME CONTENT LAYOUT AS A5-02
21”
W.I.C. CLINIC / W.I.C. CLÍNICA PHARMACY WAITING / FARMACIA DE ESPERA LABORATORY WAITING / LABORATORIO DE ESPERA
ROUTED LETTERING WITH PAINT FILL
COLOR/MATERIAL PALETTES
21”
2 3 4
P6
3/4”
4”
A1-3
A1-4
A1-3 A1-3
A1-3 FRONT
2
lines indicate edge of alum. behind
ELEVATION: SIGN VISUAL SCALE: 1 1/2”=1’-0”
0
1/4” DIA.
1/2”
BOTTOM
sharp bend 90° CORNERS softened close to 1/32” radius
drilled hole for fastener screw, TYP. 13”
8
16
1”
5/16”
3
SECTION SCALE: 6”=1’-0”
24
36
48
4 1/2” dia.
0
1”
1 1/2”
INFORMATION / INFORMACIÓN 1/2” TYP.
4
PARTIAL ELEV: GRIDS & LAYOUT
Z5
T9
T8
1”
ALIGN BOTTOM OF TEXT TO MARGIN, SAME FOR BOTH
SCALE: 3”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 35
12”
A7
12”
BATHROOM PLATE 16
16
M1
3/4”
M1
12”
sharp bend 90° CORNERS softened close to 1/32” radius
12” P6 ROUTED WITH PAINT FILL
P6 ROUTED WITH PAINT FILL
1/32” RAISED
1/32” RAISED P6 LETTERING
P6 LETTERING MEN / HOMMESMEN / HOMMES WOMEN / FEMMES WOMEN / FEMMES RESOURCE- JOB-
1
RESOURCE- JOB-
RESOURCE- JOB-
match M1 to
A7-01 ELEV: SIGN VISUAL SCALE: 3”=1’-0”
0
RESOURCE- JOB-
0
2
8
M1
A7-02 ELEV: SIGN VISUAL SCALE: 3”=1’-0”
match to
8
6”
A1-4
6”
0
0
3/4”
Z1
Z2 A1-3
6”
6” Z3
Z3 1/4” DIA.
1/2” 2”
MEN / HOMMESMEN / HOMMES WOMEN / FEMMES WOMEN / FEMMES RESOURCEJOB1/2” TYP.
RESOURCE- JOB-
8
RESOURCE- JOB-
sharp bend 90° CORNERS softened close to 1/32” radius
RESOURCE- JOB-
1”
8 T1
4
T3
T2
T1
A7-01 ELEV: GRIDS & LAYOUT
5
T2
A7-02 ELEV: GRIDS & LAYOUT
# # 6 1 SG84 SAME
SCALE: 3”=1’-0”
T3
5/16”
6
SCALE: 3”=1’-0”
SECTION SCALE: 6”=1’-0”
# 6 SAME
16
16 3”
lines indicate edge of alum. behind
3”
3”
A1-3
7
3”
drilled hole for fastener screw, TYP.
A1-3
MEN / HOMMESMEN / HOMMES WOMEN / FEMMES WOMEN 8 ELEV: BOTTOM FACE/ FEMMES RESOURCE- JOB-
RESOURCE- JOB-
RESOURCE- JOB-
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
P6
COLOR/MATERIAL PALETTES
ELEV: FRONT FACE SCALE: 3”=1’-0”
M1
RESOURCE- JOB-
SCALE: 3”=1’-0” DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 36
A8 EXPLODED AXON - REFERENCE a8-3
a8-1
a8-2 a8-3
a8-4 a8-5
a8-1
a8-3
a8-2 a8-3
a8-5
a8-5
a8-1
Min. 1/16” bent anodized aluminum bracket with two elongated holes on face for fastening to wall and a hole in bends to coordinate with flange on backside of “A8” sign.
a8-2
Phillips black oxide or other coated screw to fasten sign bracket to wall.
a8-3
Anodized aluminum flange. Single piece cut from aluminum stock, pretapped to receive A1-8 screw, and permanently adhered to backside of “A” sign.
a8-4
1/8” painted aluminum pan sign with 3/4” returns on all sides. All visible sign corners to be smooth and square. Slightly soften edge to within a 1/32” radius. Lettering and content is laser-engraved or routed with paint fill. COLOR VARIES.
a1-5
Socket cap screw with hex or star drive drive. Finish is black oxide or other approved coated finish.
a8-5
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 37
16
24
16”
36
5 16”
0 1”
0 P7
ROUTED P8 LETTERING WITH PAINT FILL
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
ROUTED P8 LETTERING WITH PAINT FILL
ROUTED P8 LETTERING WITH PAINT FILL
T33
8T9
T8
5
8
16
24
A8
1”
5
SUBLOBBY SQUARE (16X16)
1”
3/4”
sharp bend 90° CORNERS softened close to 1/32” radius
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
A8-3
1/2” TYP.
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
1”
1
16
ELEV: SIGN VISUAL
2
SCALE: 3” = 1’-0”
ELEV: GRIDS & LAYOUT
3”
SCALE: 3” = 1’-0”
A8-4
# 4# 5 SG84 SAME
P7
P8
ROUTED LETTERING WITH PAINT FILL
P9
COLOR/MATERIAL PALETTES
P5
ROUTED LETTERING WITH PAINT FILL A8-3 blocking, by others A8-2
facility wall BRACKET 3 3 SAME
#
A8-1
3
A8-4 1/2”
INSTALLATION DETAIL SCALE: 6”=1’-0”
A8-3
sharp bend 90° CORNERS softened close to 1/32” radius
3”
sharp bend 90° CORNERS softened close to 1/32” radius
4
ELEV: FACES SCALE: 1 1/2”=1’-0” LEFT SIDE
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
5 FRONT
DESIGN MADE
RIGHT SIDE 7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
SECTION SCALE: 6”=1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 38
A1G/ A2G / A8G EXPLODED AXON - REFERENCE
aG-6
aG-2 aG-6
aG-3 aG-1 aG-5 aG-4 aG-2 aG-3
aG-1
1
2
EXPLODED AXON - A2/ A1 (SIMILAR) SCALE: NTS
EXPLODED AXON - A8 SCALE: NTS
ag-5
aG-6
Grade 2 raised braille to match anodized aluminum color/ finish. Braille should occur directly below last line of letters - see drawings for layout.
aG-3
3M™ Scotchcal™ ElectroCut™ Graphic Film 7725 cut to size to match sign and aligned to exact opposite side of glass as “A” sign. Color to match sign opposite side - see drawings.
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
1/8” aluminum pan sign with 3/4” returns on all sides and back panel full length of sign. All visible sign corners to be smooth and square. Slightly soften edge to within a 1/32” radius. DIMENSIONS: A1G - 8” wide x 8” high x 3/4” deep” A2G - 16” wide x 8” high x 3/4” deep” A8G - 16” wide x 16” high x 3/4” deep” FINISH: A1G - Clear satin anodized aluminum A2G - Clear satin anodized aluminum or Laser-engraving or routed with paint fill - coor varies. A8G - Laser-engraving or routed with paint fill. Color varies. DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
aG-1
Bldg. anodized aluminum storefront system
aG-2
Bldg. storefront glass
aG-4
1/32” raised tactile Romark ADA dimensional letters COLOR VARIES.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 39
R
16
ROOM PLATE - GLASS MOUNT
E
3/4”
8
8”
O
G
A1G/ A2G
16”
RESOURCE JOB-LINK CENTER / RECURSOS JOB-LINK CENTRO
sharp bend 90° CORNERS softened close to 1/32” radius
RESOURCE- JOB-LINK CENTER
M1
1410
S1
M1
1/32” RAISED LETTERING
1
M1
A2G-01 ELEV: SIGN VISUAL
MATCH TO
SCALE: 3”=1’-0”
S2
8
M1
1/32” RAISED LETTERING
S5
P10
1/32” RAISED LETTERING
P7
ROUTED LETTERING WITH PAINT FILL
3M VHB Tape adhesive product no. 4920 or approved equal.
P8 ROUTED LETTERING WITH PAINT FILL
COLOR/MATERIAL PALETTES aG-3
V5
16
0
V5
V5
V8
V6
COLOR OF VINYL BACK PANELS # 2 2# SG84 SAME
RESOURCE- JOB-LINK CENTER
2002
S6
1/32” RAISED LETTERING
GREEN MEADOWS MEETING ROOM / GREEN MEADOWS SALA DE REUNIONES 0
M1
S2
Good bye. 8
sharp bend 90° CORNERS softened close to 1/32” radius
Top
DCHS
V2
Good bye.
V1
0 3
8
ONLY OCCURS IN SUBLOBBY LOCATIONS
2
SECTION SCALE: 6”=1’-0”
16 lines indicate edge of alum. behind
ELEV: VINYL BACK PANEL SCALE: 1 1/2”=1’-0”
0
1”
left side
T1
Good bye.
Right side
2”
8 4
front
PARTIALELEV: GRID & LAYOUT VINYL BACK PANEL SCALE: 3”=1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
bottom
5
ELEV: ALL FACES SCALE: 6”=1’-0”
DCHS DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 40
0
8 0
E
8
8”
1”
ROOM NAME / NOMBRE DE LA SALA
8”
S5
T2
T3
RESOURCE- JOB-LINK CENTER
T1
2120
MATCH TO
2120
1” 3/8”
ROOM NAME / NOMBRE DE LA SALA
T.O. BRAILLE
M1
RESOURCE- JOB-LINK CENTER
SUBLOBBY PLATE
ROOM NAME / NOMBRE DE LA SALA
T1
1/32” RAISED LETTERING
A1G/ A2G-03/ A2G-04
1”
M1
RESOURCE- JOB-LINK CENTER
3 1/2” 2”
2120
M1
1/2”
8
1
2
A1G ELEV: SIGN VISUAL
16
1/32” RAISED LETTERING
A1G ELEV: GRIDS & LAYOUT
SCALE: 3”=1’-0”
S4
SCALE: 3”=1’-0”
16”
0
8
0
8
1”
16
1”
M1
S1
M1
1/32” RAISED LETTERING
S2 1/32” RAISED LETTERING
M1
S5
1/32” RAISED LETTERING
COLOR/MATERIAL PALETTES
16 16
0 0
THE DURHAM CENTER
8”
THE DURHAM CENTER
RESOURCE- JOB-LINK CENTER
T1
THE DURHAM CENTER
T3
RESOURCE- JOB-LINK CENTER
THE DURHAM CENTER
RESOURCE- JOB-LINK CENTER
2410 3
1/32” RAISED LETTERING
A2G-02 ELEV: SIGN VISUAL S6 SCALE: 3”=1’-0”
S6
MATCH TO
P10
8
4
2410
2”
2410
8
RESOURCE- JOB-LINK CENTER
4 1/2”
2410
T1
THE DURHAM CENTER
RESOURCE- JOB-LINK CENTER
6”
RESOURCE- JOB-LINK CENTER
2410
S6
THE DURHAM CENTER
2410
1/2”
P10
S6
COLOR/MATERIAL PALETTES
A2G-02 ELEV: GRIDS & LAYOUT SCALE: 3”=1’-0”
1/32” RAISED LETTERING
1”
3”
INTAKE LOBBY /INTAKE LA INGESTA DE LOBBY LOBBY / LA INGESTA DE LOBBY
INTAKE LOBBY /INTAKE LA INGESTA DE LOBBY LOBBY / LA INGESTA DE LOBBY
T1
T2
7”
2 1/2” 2”
INTAKE LOBBY /INTAKE LA INGESTA DE LOBBY LOBBY / LA INGESTA DE LOBBY P7
5
A2G-03 ELEV: SIGN VISUAL SCALE: 3”=1’-0”
6 P7 ROUTED WITH PAINT FILL, TYP. ALL CONTENT
P9
P8
A2-03 ELEV: GRIDS & LAYOUT COLOR/MATERIAL PALETTES
SCALE: 3”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 41
A8G 16
24
36
16”
THE DURHAM CENTER
16”
Managing Behavioral Health & Disability Services
SUBLOBBY SQUARE - GLASS MOUNT (16X16) 3/4”
TOP
sharp bend 90° CORNERS softened close to 1/32” radius
P10
P6
T18
ROUTED LETTERING WITH PAINT FILL
P6
3M VHB Tape adhesive product no. 4920 or approved equal.
T8
ROUTED LETTERING WITH PAINT FILL
aG-3
LEFT SIDE
1
RIGHT SIDE
ELEV: SIGN VISUAL SCALE: 3” = 1’-0”
NOTE: THIS SIGN IS SIMILAR TO SIGN “A8” EXCEPT FOR BACKPANEL AND MOUNTING METHOD 16”
BOTTOM
2
1# 5 # SG85 SAME
ELEV: FACES SCALE: 3” = 1’-0”
16
16”
P7
DCHS
P8
ROUTED LETTERING WITH PAINT FILL
P9
ROUTED
P5 LETTERING
WITH PAINT FILL
P10
P5
ROUTED LETTERING WITH PAINT FILL sharp bend 90° CORNERS softened close to 1/32” radius
COLOR/MATERIAL PALETTES
V6
3
ELEV: VINYL BACK PANEL SCALE: 1 1/2”=1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
V6
V7
V8
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
SECTION SCALE: 6”=1’-0”
COLOR OF VINYL BACK PANELS DESIGN MADE
5
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 42
A9, A10 EXPLODED AXON - REFERENCE
a9-5
a9-4
a9-1
a9-3
NUMBER KNOCK-OUT a9-2
a9-1
1/8” clear satin anodized aluminum pan sign with 3/4” returns on all sides. Sign is “L” shaped with one side flush to wall and other side projecting. All visible sign corners to be smooth and square. Slightly soften edge to within a 1/32” radius. Elongated circle cut-outs occur on wall side to receive screw fasteners. Numeral is waterjet or lasercut from projecting side to be read from back of sign.
a9-2
Phillips black oxide or other coated screw to fasten sign bracket to wall.
a9-3
1/8” aluminum sheet stock painted all sides. Part is permanently adhered/fastened to part A9-1, fasteners/ adhesives concealed.
a9-4
1/8” aluminum sheet stock lasercut or waterjet cut to shape of numeral. Painted all visible faces/sides. Part is permanently adhered to part A9-3 via welding or other permanent adhesion method.
a9-5
Industrial strength velcro on parts A9-1 coordinated to A9-6.
a9-6
Industrial strength velcro on part A9-7.
a9-7
1/8” aluminum sheet stock painted all sides. Part is applied after sign pan is fastened to wall. Part should be straight and square to A9-1.
a9-7 a9-6
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 43
8
12”
16”
5 5 16”
5 5
12”
A9
# 2 SG85
DESTINATION MARKER - RIGHT
3/4”
12”
M1
P7
P8
1
SCALE: 1 1/2”= 1’-0”
1
M1
CUT-OUT TO PANEL BEYOND
2
UNFOLDED ELEV: SIGN VISUAL- FRONT
a9-3
BLDG. WALL
P7
DIMENSIONAL PAINTED LETTER
1
a9-7
1/5
2/6
1/5
ELEV.: SIGN VISUAL - BACK SCALE: 1 1/2”= 1’-0”
P7
P9
P5 #
7 SAME
P8
P5
P6
a9-1
COLOR/MATERIAL PALETTES
0
0
8#2
2 1/2”
16 2 1/2”
3/4”
maintain 1/32” -24 1/16” space 24 between edge of panel and frame.
16
# 7 SAME
3
TOP VIEW
4
SCALE: 3” = 1’-0”
HORIZONTAL SECTION SCALE: 3” = 1’-0”
0 2”
0
SG85
8
55 55
a9-1
T35
8 1/2” TYP. 2”
8
a9-3 a9-4
NUMBER KNOCK-OUT
1/2” TYP.
1” 1”
5
UNFOLDED ELEV.: GRIDS & LAYOUT FRONT SIDE SCALE: 3” = 1’-0”
EDGE OF NUMBER IS JUSTIFIED TO MARGIN EDGE
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
1”
1”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
6
ELEV: GRIDS & LAYOUT BACKSIDE SCALE: 3” = 1’-0” DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
7
SECTION SCALE: 3” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 44
A9 M1
P5
P5
P6
M1
DESTINATION MARKER - RIGHT BATHROOM MARKER CONTENT
M1
a9-3
1
SCALE: 1 1/2”= 1’-0”
0 0
2
UNFOLDED ELEV: SIGN VISUAL
0
8
8
16
16
24
P6
KNOCK-OUT TO PAINTED PANEL (A9-3) BEYOND
ELEV.: SIGN VISUAL SCALE: 1 1/2”= 1’-0”
24
0
1/2” TYP.
8
8
5 3/4”
Z3
3
Z4
7”
7”
1”
1”
1”
1”
4
UNFOLDED ELEV.: GRIDS & LAYOUT FRONTSIDE SCALE: 3” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
Z4
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
Z3
ELEV: GRIDS & LAYOUT BACKSIDE SCALE: 3” = 1’-0” DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 45
27
8
16”
12”
16”
27
12”
P5
1
P9
M1
2
UNFOLDED ELEV: SIGN VISUAL - FRONT
A10 # 2 sim. SG85
27
12”
M1
27
3/4”
a9-7 BLDG. WALL
a9-3
1
1
P9
ELEV: SIGN VISUAL - BACK
1/5
SCALE: 1 1/2”= 1’-0”
SCALE: 1 1/2”= 1’-0”
2/6
1/5
7 SAME
P5
a9-1
#
P9
DESTINATION MARKER - LEFT
COLOR/MATERIAL PALETTES
0
maintain 1/32” - 1/16”8space 8 between edge of panel and frame.
0 1”
0
16
16 2 1/2”
24
2# SG85
24
3/4”
3
SCALE: 3” = 1’-0”
2 1/2”
27 27
T35
1/2” TYP.
1/2” TYP. 2”
8
HORIZONTAL SECTION SCALE: 3” = 1’-0”
1”
EDGE OF NUMBER IS JUSTIFIED TO MARGIN EDGE
8
4
TOP VIEW
2”
0
#7 SAME
1”
1”
5
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ELEV: GRIDS & LAYOUT - BACK
T35
a9-4
NUMBER KNOCK-OUT
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
1”
7
SECTION SCALE: 3” = 1’-0”
SCALE: 3” = 1’-0” DESIGN MADE
a9-3
1”
6
UNFOLDED ELEV.: GRIDS & LAYOUT - FRONT SCALE: 3” = 1’-0”
27 27
a9-1
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 46
A11 VARIABLE SIGN 1
A11-1 A11-2
A11-3
A11-2
a11-8
A11-3
a11-1
Min. 1/16” bent anodized aluminum bracket with two elongated holes on vertical face for fastening to wall and a single hole in bottom bend to coordinate with flange on backside of “A” sign. The top portion is bent or welded assembly to connect to top of “A” sign.
a11-2
Phillips black oxide or other coated screw to fasten sign bracket to wall.
a11-3
Anodized aluminum flange. Single piece cut from aluminum stock, pretapped to receive A1-8 screw, and permanently adhered to backside of “A” sign.
a11-4
1/8” clear satin anodized aluminum pan sign with 3/4” depth. Right side of sign is an elongated “c” shape to receive part A11-7 slid in from right. All visible sign corners to be smooth and square. Slightly soften edge to within a 1/32” radius.
a11-5
1/8” milk white lightweight acrylic with routed elongated holes larger than screw head to act as countersink for screw heads. The face of this panel should sit slightly proud of screw heads to prevent part A11-7 from touching screws.
a11-6
Phillips stainless steel or other non-corrosive finish screw to fasten sign to wall.
a11-7
1/4” clear satin anti-glare acrylic glass by Acrylite or approved other with all edges polished. Part has drill hole in bottom right to receive screw lock (part A11-9). Space between acrylic and back shall allow for a folded 80lb. sheet of paper easily slid in from side without removing acrylic part.
a11-8
Socket cap screw with hex or star drive. Finish is black oxide or other approved coated finish.
a11-9
Set screw standard socket with flat point and hex drive. Finish is black oxide, stainless steel or other approved non-corrosive finish.
a11-4
a11-7
a11-8
a11-5 a11-9
DRILL HOLE TO RECEIVE PART A11-9
a11-6
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 47
16”
A11
12 1/8”
VARIABLE SIGN 1 16
SS TRAINING SESSION 3PM - 4PM
8”
7 11/16”
LINE INDICATES EDGE OF ACRYLIC WHEN IN SIGN. SET BACK IS FOR FINGER PULL A1-4
1
3/8”
M1
A1-7
SIGN VISUAL SCALE: 3” = 1’-0”
# 4 SAME
32
2
# # 5 3 SAME SG85
# # 6 4 SAME SG85
SIGN VISUAL ACRYLIC INSERT SCALE: 3” = 1’-0”
# 7 SAME
3/4”
EQ.
5/16”
sharp bend 90° CORNERS softened close to 1/32” radius
4” 3 1/2”
1”
A2
1/2” EQ.
3 1/2”
sharp bend 90° CORNERS softened close to 1/32” radius ALUM. DIMPLE TO SET SIGN FLUSH WITH OFFSET FROM BRACKET
3/8” A1-3 2 1/4”
A1-3
7 1/4”
A1-4
A1-4 A1-7 A1-5
1 5/8” +/-
DRILL HOLE FOR SCREW FASTENER
DRILL HOLE FOR ACRYLIC LOCK
1”
A1-3
3/8”
A1-4
sharp bend 90° CORNERS softened close to 1/32” radius
A1-3
A1-9 1/4” DIA.
1/2”
48 3
SIGN A12 SCALE: 3” = 1’-0”
4
SECT A
sharp bend 90° CORNERS softened close to 1/32” radius
SCALE: 6” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
5/16”
5
SECT A
6
SCALE: 6” = 1’-0” 7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
SECT: FRAME ONLY
7
SCALE: 6” = 1’-0” REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
SECT: WITH BACKER PANEL & ACRYLIC SCALE: 6” = 1’-0” DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 48
A12, A13
# 1 SG86
TACKABLE BOARD
47 1/2”
a1-4
a12-1
SIGN A5
a12-2
A1-1
a1-2
3/4”
a1-4
A12-2
3/8” 31 1/2”
3/4”
SIGN A12 A12-1
23 1/2”
A12-3 A12-4
this side of frame is removable.
SG35/ SG36
1
A12-4 A12-3
SIGN A12 SCALE: 1” = 1’-0”
A12-2 A1-8 A12-1 # 2 SG86
SIGN A13
a1-4
SIGN A6
4
4 SAME
71 1/2”
DETAIL SCALE: 6” = 1’-0”
A12-4 A12-3
NICHE ON WALL TO RECEIVE TACKABLE SIGN, by others
31 1/2”
A1-1 23 1/2”
a1-2
“A” series pan sign. Refer to dwgs. SG35/SG36
a1-4 a12-1
Phillips screw in drive anchor to fasten sign bracket to wall.
a12-2
Clear satin anodized aluminum “j” channel frame with screw holes to fasten to wall. Fasteners concealed behind part A12-3.
a12-3
1/4” MDF or other stiff backer panel with part A12-4 adhered to front face. Paint edges of front face that may be visible between frame and Forbo.
a12-4
Forbo Bulletin board colored cork tackable surface adhered with low VOC adhesive to part A12-3. Edges shall be cut straight, non-fraying, and set within 1/8” of frame.
4 SAME
2
SIGN A13 SCALE: 1” = 1’-0” 3
EXPLODED SECTION SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 49
0
0 0
8
8”
B1
8
PANEL PLATE 1/32” RAISED
ROOM NAME / NOMBRE DE LA SALA
ROOM NAME ROOM NAME / NOMBRE / NOMBRE DE DE 8” LA SALALA SALA
LETTERINGNAME ROOMT1NAME ROOM /1/32” NOMBRE DE / NOMBRE DE RAISED T2 LETTERING LA SALALA SALA
ROOM ROOM NAMENAME / NOMBRE / NOMBRE DE DE LA SALA LA SALA
ROOM NAME ROOM NAME / NOMBRE / NOMBRE DE DE LA SALALA SALA
ROOM NAME / NOMBRE DE LA SALA
RESOURCE- JOB-LINK CENTER
RESOURCE- JOB-LINK RESOURCE- JOB-LINK CENTER CENTER
RAISED BRAILLE RESOURCE- T3 JOB-LINK RESOURCEJOB-LINK CENTER CENTER
RESOURCE- JOB-LINK RESOURCE- JOB-LINK CENTER CENTER
RESOURCE- JOB-LINK RESOURCE- JOB-LINK CENTER CENTER
RESOURCE- JOB-LINK CENTER
2120
2120
2120
2120
T1
b1-2
b1-1
1/32” RAISED 2120 LETTERING
2120 2120
2120
2120
2120
8 P8 1
ELEV:
2
0
8
SCALE: 3”=1’-0”
1/2”
0
1”
P5
P9
OR MATCH
P5
P10 OR
MATCH
ELEV: SIGN VISUAL - COLOR PALETTES SCALE: 3”=1’-0”
1/2”
3/8” - 1/2”
b1-1
1/2”
ROOM ROOM NAME NAME / NOMBRE DEDE / NOMBRE LALA SALA SALA
ROOM NAME / NOMBRE DE LA SALA RESOURCE- JOB-LINK CENTER
2120 2120
3”
2”
3
ELEV: GRIDS & LAYOUT
RESOURCECENTER
2120
2120
4
3/8” - 1/2” sign with rigid backer panel. Sign face and sides to be matte painted or have integral color that is visibly seamless with backer panel so that sign appears as single slab.Texture or dimpling is unacceptable. Subsurface painting or graphics is unacceptable. Sign face material shall have a high tolerance for cleaning agents and high resistance to vandalism. Backer panel shall be rigid and straight with square corners and no warping. The backer panel shall be integral to sign face or permanently adhered with edges sanded and smooth between joined pieces and painted single background color - color varies. All signs to be of same thickness.
ROOM NAME / NOMBRE DE LA SALA
b1-1
RESOURCERESOURCEJOB-LINK JOB-LINK CENTER CENTER
8
OR MATCH
1/2”
3/8”
E
P7
b1-2
Sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign. If sign is mounted to glass a piece of 3M Scotchal Electrocut graphic film shall be applied on opposite side of glass aligned to sign. Color of film is to match color of JOB-LINK sign face.
Tactile characters/symbols raised 1/32” from sign face shall occur. Characters shall be permanetly adhered or integral to sign face depicting name of room in both English (DIN PRO bold) and Spanish translation (DIN PRO regular) with Grade 2 braille below, and room number in lower left corner as shown in drawings. All characters to be raised and painted contrasting color to sign face - color varies. Grade 2 braille shall be rasied per ADA/ ANSI specifications and same color as sign face.
SECTION
SCALE: 6”=1’-0”
SCALE: 6”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 50
SS
STAIR 1
STAIR 1
STAIR STAIR 1 1
STAIR 1
STAIR 1
STAIR 1 NO ROOF ACCESS
STAIR 1 NO ROOF ACCESS
1 NO ACCESS ROOF ACCESS STAIR STAIR 1 NO ROOF
STAIR 1 NO ROOF ACCESS
STAIR 1 NO ROOF ACCESS
NO ROOF ACCESS
ROOF ACCESS NONO ROOF ACCESS
NO ROOF ACCESS 0
8”
NO ROOF ACCESS
8
0
NO ROOF ACCESS
8
PANEL PLATE STAIR
8 0 Z7
B2
0
RAISED pictogram
b2-2
8” b2-1
STAIR 1
T1
1/32” RAISED LETTERING
STAIR STAIR 2 2 STAIR 1
STAIR STAIR 21 b2-2STAIR 1
STAIR 2
STAIR 2
STAIR 1 NO ROOF ACCESS
1 NO ACCESS ROOFSTAIR ACCESS STAIR 1 NO ROOF ACCESSSTAIR STAIR 1 NO ROOF ACCESS STAIR 1 NO ROOF ACCESS 1 NO ROOF
T3
NO ROOF ACCESS
P12 P12
STAIR STAIR 11 NO NO ROOF ROOF ACCESS STAIR ACCESS1 NO ROOF ACCESS
STAIR12 STAIR
STAIR 1
STAIR1 1NONOROOF ROOFACCESS ACCESS STAIR
STAIR 1 NO ROOF ACCESS
1/32” RAISED NO ROOF ACCESSNO ROOF ACCESS ROOF ACCESS NO ROOF ACCESS T2 NO LETTERING
8
8 P6
1
ELEV.
2
0
SCALE: 3”=1’-0”
1/2”
0 1”
1/2”
NO ROOF ACCESS
ELEV.
3
8
SCALE: 3”=1’-0”
4 1/2”
ELEV: SIGN VISUAL
OR MATCH
4
ELEV: SIGN VISUAL
SCALE: 3”=1’-0”
1/2”
SCALE: 3”=1’-0”
3/8” - 1/2”
STAIR 2
STAIR 2
STAIR 2 STAIR 2
STAIR 2
STAIR 2
STAIR 1 NO ROOF ACCESS
STAIR 1 NO ROOF ACCESS
STAIR 1 NO ROOF STAIR ACCESS1 NO ROOF ACCESS
STAIR 1 NO ROOF ACCESS
STAIR 1 NO ROOF ACCESS
1/2” b1-1 b2-1
3/8”
STAIR STAIR1 1
3”
CESS
3 1/2”
STAIR STAIR 1 NO 1 NO ROOF ROOF ACCESS ACCESS 2”
NO NOROOF ROOFACCESS ACCESS
1 1/2”
Sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign. If sign is mounted to glass a piece of 3M Scotchal Electrocut graphic film shall be applied on opposite side of glass aligned to sign. Color of film is to match color of sign face.
STAIR 1
STAIR 1
STAIR 1 NO ROOF ACCESS
STAIR 1 NO ROOF ACCESS
NO ROOF ACCESS
8 5
ELEV: GRIDS & LAYOUT
6
SCALE: 6”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
3/8” - 1/2” sign with rigid backer panel. Sign face and sides to be matte painted or have integral color that is visibly seamless with backer panel so that sign appears as single slab. Texture or dimpling is unacceptable. Subsurface painting or graphics is unacceptable. Sign face material shall have a high tolerance for cleaning agents and high resistance to vandalism. Backer panel shall be rigid and straight with square corners and no warping. The backer panel shall be integral to sign face or permanently adhered with edges sanded and smooth between joined pieces and painted single background color - “Black”. All signs to be of same thickness.
SECTION
NO ROOF ACCESS b1-2
Tactile characters and symbols raised 1/32” from sign face shall occur. Characters and symbols shall be permanently adhered or integral to sign face depicting the following : - pictogram - stair name (DIN PRO bold) - if roof access is available (DIN PRO regular) - Grade 2 braille below stair name. All characters and symbol to be raised and painted - Jalite 310 Photoluminescent paint system or equal. Grade 2 braille shall be raised per ADA/ ANSI specifications and same color as sign face - “Black”.
SCALE: 6”=1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 51
CAL
NCY Y OSET
8 0 4”
0
CLOSET CLOSET 2120 2120 CLOSET
1
ELEV.
0 2120
SCALE: 3”=1’-0”
CLOSET
8
4 0
1/2”
PANEL MEETING ROOM PLATE
T1
2120 CLOSET
T3
1/2”
4
EMERGENCY EXIT ONLY
2120
8
CLOSET ELECTRICAL 2120
CLO2120 CLOSETSET 2120 ELECTRICAL 2120 ELECTRICAL
1/2”
3
2120 2120
b1-1CLO2120
2120
2120 ELECTRICAL
CLOSET ELECTRICAL
P12
OR MATCH
2120 ELECTRICAL
P6
2
ELEV: SIGN VISUAL - COLOR PALETTES SCALE: 3”=1’-0”
3/8” - 1/2” sign with rigid backer panel. Sign face and sides to be matte painted or have integral color that is visibly seamless with backer panel so that sign appears as single CLO2120 CLOSETSET 2120 ELECTRICAL slab. Texture or dimpling is unacceptable. Subsurface painting or graphics is unacceptable. Sign face material shall have a high tolerance for cleaning agents and high resistance to vandalism. Backer panel shall be rigid and straight with square corners and no warping. The backer panel shall be integral to sign face or permanently adhered with edges sanded and smooth between joined pieces and painted single background color - “Black”. All signs to be of same thickness. b1-1
2120 2120 CLOSET ELECTRICAL
2120 EMERGENCY EXIT ONLY ELECTRICAL EMERGENCY EXIT ONLY
2120
3/8” - 1/2”
T1
T3
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
CLOSETSET
2120 EMERGENCY EXIT ONLY ELECTRICAL CLOSET ELECTRICAL 2120
SCALE: 6”=1’-0”
2120 ELECTRICAL 2120 ELECTRICAL
2120
1/32” RAISED LETTERING
1/32” RAISED 2120 LETTERING
Sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign. If sign is mounted to glass a piece of 3M Scotchal Electrocut graphic film shall be applied on opposite side of glass aligned to sign. Color of film is to match color of sign face.
ELECTRICAL EMERGENCY EXIT ONLY
ELECTRICAL
b3-1
2120 ELECTRICAL 2120 ELECTRICAL
2120 b1-2 ELECTRICAL Tactile characters/symbols raised 1/32” from sign face shall occur. Characters shall be permanently adhered or 2120 ELECTRICAL integral to sign face depicting name of room (DIN PRO
2120
ELEV: GRIDS & LAYOUT
EMERGENCY ELECTRICAL EXIT ONLY
CLOSET
2120 ELECTRICAL
P6
2120 CLOSET
2120 ELECTRICAL
2120 ELECTRICAL
2120 EMERGENCY EXIT ONLY CLOSET ELECTRICAL EMERGENCY EXIT ONLY
OR MATCH
b1-2
ELECTRICAL
P5
EMERGENCY EXIT ONLY
2120 ELECTRICAL
2120
CLOSET 2120
2120 ELECTRICAL
T1
CLO2120 CLOSETSET
P6
CLO2120 CLOSETSET
2120 ELECTRICAL
2120 ELECTRICAL
1 1/2”
OR MATCH
ELECTRICAL
1/2”
1/2”
CLOSET
ELECTRICAL 2120
CLOSET
P5
2120
2120 2120 CLOSET ELECTRICAL 2”
1/32” RAISED CLOSET LETTERING 2120 CLOSET
2120
ELECTRICAL
1/2”
ECTRICAL
ELECTRICAL
0
B3
8
2120 CLOSET 4
CLOSET
20
0
8”
4
2120
SECTION SCALE: 6”=1’-0”
EMERGENCY EXIT ONLY
DESIGN MADE
bold) with Grade 2 braille below, and room number in lower left corner as shown in drawings. All characters to be raised and painted contrasting color to sign face - “White”. Grade 2 braille shall be raised per ADA/ ANSI specifications and same color as sign face.
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
2120 ELECTRICAL
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
EMERGENCY EXIT ONLY SG- 52 REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
2120 ELECTRICAL
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
DIRECTOR 0
2120 8”
8
0
2120
2120
2120
2120
2120
2120
2120
2120
8
2 1/2”
2120
PANEL PLATE VARIABLE
0
b4-3
JANE FULTON DIRECTOR
8”
B4
8”
1”
2120
8 2120
JANE FULTON DIRECTOR
b4-4
4 1/2”
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
2120
b4-1
8 T3
0
RAISED BRAILLE
1
A3
T1
2
SCALE: 3”=1’-0”
P8 MATCH
P5
P9
OR MATCH
P5
8
1/32” RAISED LETTERING
ELEV.
OR
P8
b4-2
ELEV: INSERT HOLDER
3
SCALE: 3”=1’-0”
ELEV: SIGN VISUAL - COLOR PALETTES SCALE: 3”=1’-0”
0
b1-1 b1-3
JANE FULTON DIRECTOR 2120 2”
2120
2120 2120
2120
2120
2120
2120
2120
2120
1/2”
4
ELEV: GRIDS & LAYOUT SCALE: 6”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
3/8” - 1/2”
5
SECTION SCALE: 6”=1’-0”
DESIGN MADE
6
3/8” - 1/2” sign with rigid backer panel. Sign face and sides to be matte painted or have integral color that is visibly seamless with backer panel so that sign appears as single slab. Texture or dimpling is unacceptable. Subsurface painting or graphics is unacceptable. Sign face material shall have a high tolerance for cleaning agents and high resistance to vandalism. Backer panel shall be rigid and straight with square corners and no warping. The backer panel shall be integral to sign face or permanently adhered with edges sanded and smooth between joined pieces and painted single background color - color varies. All signs to be of same thickness. Sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign. If sign is mounted to glass a piece of 3M Scotchal Electrocut graphic film shall be applied on opposite side of glass aligned to sign. Color of film is to match color of sign face.
b1-2
Tactile characters/symbols raised 1/32” from sign face shall occur. Characters shall be permanetly adhered or integral to sign face depicting name of room in both English (DIN PRO bold) and Spanish translation (DIN PRO regular) with Grade 2 braille below, and room number in lower left corner as shown in drawings. All characters to be raised and painted contrasting color to sign face - color varies. Grade 2 braille shall be raised per ADA/ ANSI specifications and same color as sign face.
b4-4
1/8” acrylic by Acrylite or Lexan with polished edges. Piece shall slide smoothly within sign frame and allow for insertion of single sheet of 80 lb. text paper behind.
1”
8
OR
P10 MATCH
SECTION SCALE: 6”=1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 53
B5
16”
0
5
5
00 0
055 5
5
00
1655
5”
11”
16
16 16 1”
5”
0
00
EETING MEETING MEETING MEETING MEETING MEETING T1
MEETING MEETING
120
MEETING 2120
MEETING MEETING MEETING 2120 2120 2120
2120 2120
21202120 2120
ETING
b5-1
T3 T1
MEETING MEETING 2120 2120
MEETING 2120
2120 2120
2120
1/32” RAISED LETTERING
MEETING 2120
0
5
ELEV.
2
SCALE: 3”=1’-0”
0
0
ELEV. SCALE: 3”=1’-0”
1/2”5
16
MEETING 2120
MEETING MEETING 2120 2120
2120
88
1
b5-2 MEETING MEETING MEETING MEETING MEETING MEETING MEETING MEETIN MEETIN MEETIN
MEETING MEETING
8”
MEETING 2120
8
PANEL MEETING VARIABLE
1 1/2”
MEETING MEETING
1/32” RAISED LETTERING
8”
TING 0
1”
2120
2120 2120
shop drilled holes for marker holder, behind
OR
P5
P6 MATCH
5
2
P8
0
1”
0 0
0
0
5
0
MEETING
5
16
5
16
MEETING MEETING MEETING MEETING MEETING
MEETING 2120
MEETING 2120
8 8
MEETING 2120
MEETING 2120
MEETING 2120
MEETING 2120
2120 2120
MEETING 2120
2120
3”
2”
2120 2120
2120
2120
MEETING 2120
2120 2120 OR
P8 MATCH
MEETING
b1-2 MEETING 2120
2120
2120 2120
ELEV: SIGN VISUAL SCALE: 6”=1’-0”
MEETING 2120
2120
2120
1/4”
b5-3
b5-3 b5-1
4B ELEV: GRIDS & LAYOUT SCALE: 6”=1’-0”
4
P5
OR
P10 MATCH
16
MEETING
MEETING MEETING
MEETIN MEETIN
Tactile characters/symbols raised 1/32” from sign face shall occur. Characters shall be permanently adhered or integral to sign face depicting name of room in both English (DIN MEETING PRO bold) and Spanish translation (DIN PRO regular) with 2120 Grade 2 braille below, and room number in lower left corner as shown in drawings. All characters to be raised and MEETING painted contrasting color to sign face - color varies. MEETING Grade 2 braille shall be raised2120 per ADA/ ANSI specifications2120 and same color as sign face. MEETING MEETING
2120
2120 2120 0.675” variable part made of of acrylic or other approved 2120 2120 light-weight material with slightly smoothed edges, primed 2120
The assembled sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign. If sign is mounted to glass a piece of 3M Scotchal Electrocut graphic film shall be applied on opposite side of glass aligned to sign. Color of film is to match color of sign face.
0.675”
3
OR
P9 MATCH
2120 2120 2120 2120
with one coat white base, and painted with Rust-Oleum Specialty Dry Erase Paint (color:241140) or IdeaPaintTM PRO solvent-based (dry-erase) coating. Drill three 1/2” holes in top of part to receive a fine point Expo Dry Erase marker provided by others. Sand and smooth edges of holes and prime and finish same. Part shall be rigid and straight with square corners and no warping. Paint and finish all visible sides of part the same.
4A
8
21202120 2120
2120
1/2” DIA. hole shop drilled, typ.
MEETING 2120
MEETING MEETING MEETING MEETING 2120 2120 2120 2120
1/4” sign part. Sign face and sides to be matte painted or have integral color - color varies. Texture or dimpling is unacceptable. Subsurface painting or graphics is unacceptable. Sign face material shall have a high tolerance for cleaning agents and high resistance to vandalism. Sign part to be permanently adhered/fastened to variable part (B5-3) and set flush to top, bottom, and sides of variable part.
MEETING
MEETING 2120
4
P5
b1-1
MEETING MEETING
MEETING
G
0
MEETING b5-3
MEETING MEETING MEETING MEETING 2120 2120 2120 2120
SCALE: 3”=1’-0”
b5-4
5
MEETING 2120
ELEV: SIGN VISUAL - COLOR PALETTES
b5-1
0
MEETING 2120
SECTION b5-4
SCALE: 6”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
Fine point Dry Erase marker provided by others. Fabricator to use Expo brand fine point for sizing of drilled holes.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 54
A
B6
24
A
24”
CHECK-IN /REGISTRO
8”
1
PANEL OVERHEAD
P8
P7
NURSE’S STATION ENFERMERA DE LA EMISORA 2
SCALE: 3”=1’-0”
T18
T19
CHECK-IN /REGISTRO
1 1/2”
3 1/2”
8 6
ELEV: B6-02 PROJECTION MOUNT SCALE: 3”=1’-0”
1”
1” 0
b6-1 b6-2
ELEV: SIGN VISUAL
0
A
NURSE /ENFERMERA
T33
A
24 4- 6”
3- 4”
CHECK-IN /REGISTRO 4
ELEV: GRIDS & LAYOUT
b6-2
b6-1 b6-3 b6-3
PLAN SECT: B6-02 PROJECTION MOUNT
A
b6-2
1/8” aluminum “L” shaped bracket with pre-drilled countersunk holes to receive screw fasteners. Bracket is painted black.
b6-3
Flat cap Philips screw fasteners - finish to be black oxide - with anchor drive. Stagger screws to ensure bracket sits level on wall and for resistance to lateral impact.
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
b6-1
5
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
SECT: B6-01 FLAT MOUNT SCALE: 6”=1’-0”
B6-02 PROJECTION MOUNT: Layered 3/8” - 3/4” acrylic sign with all edges and faces painted same base color. Provide an opening on one side to receive a mounting bracket set within acrylic and secured with silicone or other permanent adhesive. Screen printed content occurs both sides. Slightly smooth edges no more than 1/32” radius.
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
b6-1
BELOW
SCALE: 3”=1’-0”
SCALE: 3”=1’-0”
3M VHB tape adhesive applied in coverage of 80% of backside of sign.
b6-1
NURS /ENF
NURSE’S S ENFERMER
B6-01 FLAT MOUNT: 3/8” acrylic sign with all edges and faces painted same base color. Screen printed content occurs both sides. Slightly smooth edges no more than 1/32” radius. Sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign. If sign is mounted to glass a piece of 3M Scotchal Electrocut graphic film shall be applied on opposite side of glass aligned to sign. Color of film is to match color of sign face.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 55
B *1 B 2*1 32 B
one
B
TWO one STAR PICTOGRAM WILL VARY
3
B7
ELEVATOR JAMB PLATES THREE
THREETWO
DEPENDING ON MANUFACTURER. SHOWN FOR REFERENCE ONLY.
4”
*1 32 B *1 B 2
3
Powder epoxy black background color. Heavy duty 19 gauge (.042) thick. INSTALL WITH PRESSURE SENSITVE ADHESIVE BACKING.
4”
brushed stainless steel copy. (font: news gothic standard. font is preferred of available standard options)
B
8 1
8
grade 2 raisedone braille
B
TWO one
ELEV: BASEMENT PLATE
2
SCALE: 6”=1’-0”
THREETWO
ELEV: FIRST FLOOR PLATE
2
SCALE: 6”=1’-0”
0 0
3
SCALE: 6”=1’-0”
ELEV: THIRD FLOOR PLATE SCALE: 6”=1’-0”
8
B *1 B
EQ.
one
2
EQ.
TWO
B *1 2 60”
8
ELEV: SECOND FLOOR PLATE
THREE
B
one
TWO
3 THREE
3 THREE
FACE OF ELEVATOR JAMB, TYPICAL BOTH SIDES AND ALL CONDITIONS
5
SAMPLE SIGN IMAGE SCALE: 6”=1’-0”
TO T.O.F.F.
4
MOUNTING HEIGHT SCALE: 3”=1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 56
24
24
B8 IN CASE OF FIRE
1/4
MATCH TO ELEVATOR CALL BUTTON WDITH
1/4 3/8”
OR P6 MATCH
P6
FNFIRE IN CASE OF FIRE CASE OF FIRE IN CASE OF FIRE CASE OFINFIRE P6 USE ELEVATOR E ELEVATOR DOELEVATOR NOT USEDO ELEVATOR NOT USE ELEVATOR DO NOT DO NOT USE TAIRS USE THE STAIRS USE THE STAIRS USE THE STAIRS USE THE STAIRS 7 1/2”
IN CASE OF FIRE DO NOT USE ELEVATOR USE THE STAIRS
IRE DO NOT IN CASE OF FIRE DO NOT IN CASE OF FIRE DO NOT USE LAS ESCALERAS USE THE USE THE USE ELEVATOR USE ELEVATOR THE
IN CASE OF FIRE DO NOT
IN CASE OF FIRE DO NOT
IN CASE OF FIRE DO NOT
USE ELEVATOR USE THE
USE ELEVATOR USE THE
USE ELEVATOR USE THE
b9-1
STAIR
STAIR
STAIR
b9-2
DE INCENDIO / EN CASO DE/ INCENDIO EN CASO DE INCENDIO / EN CASO DE INCENDIO 8” LEVADOR NOINCENDIO USAR ELEVADOR NO USAR ELEVADOR NO USAR ELEVADOR EN CASO DE 6” SCALERAS USAR LAS ESCALERAS USAR LAS ESCALERAS USAR LAS ESCALERAS NO USE ELELVADOR STAIR
STAIR
IN CASE OF FIRE T39NOT P12 USE ELEVATOR DO USE THE STAIRS
/ EN CASO DE INCENDIO NO USAR ELEVADOR USAR LAS ESCALERAS
/ EN DE INCENDIO T40 CASO P12 NO USAR ELEVADOR T3 USAR LAS ESCALERAS
N CASE OF FIRE DO 4 1/2”
OT USE ELEVATOR 3 3/8”
SE THE STAIR
1/2”
Z14 P12
1
ELEV: SIGN VISUAL SCALE: 6”=1’-0”
2
RED PAINT, SATIN OR MATTE FINISH
ELEV: GRIDS & LAYOUT
3
SCALE: 6”=1’-0”
SECTION
b1-1
SCALE: 6”=1’-0”
3/8” sign with rigid backer panel. Sign face and sides to be matte painted or have integral color that is visibly seamless with backer panel so that sign appears as single slab. Texture or dimpling is unacceptable. Subsurface painting or graphics is unacceptable. Sign face material shall have a high tolerance for cleaning agents and high resistance to vandalism. Backer panel shall be rigid and straight with square corners and no warping. The backer panel shall be integral to sign face or permanently adhered with edges sanded and smooth between joined pieces and painted single background color - “Black”. All signs to be of same thickness. Sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign.
b1-2
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
Tactile characters and symbols raised 1/32” from sign face shall occur. Characters and symbols shall be permanently adhered or integral to sign face depicting the following : - pictogram - In case of fire information in English (DIN PRO bold) and Spanish translation (DIN PRO regular) - Grade 2 braille below All characters and symbol to be raised and painted - Jalite 310 Photoluminescent paint system or equal. A single spot of “Red” paint occurs for the flame portion of symbol. Grade 2 braille shall be raised per ADA/ ANSI specifications and same color as sign face - “Black”.
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 57
12
0
12 B9
12
FIRECODE STAIRWELL SIGN
12”
STAIR B
STAIR C
ESS
ROOF ACCESS
B
ROOF ACCESS 16”
B
-3 EVEL B
OR
P6 MATCH
0
1”
2 1/2”
P12
STAIR STAIR BC
BB
1/32” DIMENSIONAL LETTERS, TYP. ALL CONTENT
5”
ELEV: GRIDS & LAYOUT
8
SCALE: 3”=1’-0”
b1-1
3/8” - 1/2” sign with rigid backer panel. Sign face and sides to be matte painted or have integral color that is visibly seamless with backer panel so that sign appears as single slab. Texture or dimpling is unacceptable. Subsurface painting or graphics is unacceptable. Sign face material shall have a high tolerance for cleaning agents and high resistance to vandalism. Backer panel shall be rigid and straight with square corners and no warping. The backer panel shall be integral to sign face or permanently adhered with edges sanded and smooth between joined pieces and painted single background color - “Black”. All signs to be of same thickness.
LEVELS B - 3 EXIT ON LEVEL B
Sign shall be installed with concealed fasteners or 3M VHB tape adhesive applied in coverage of 80% of backside of sign.
b1-2
Tactile characters and symbols raised 1/32” from sign face shall occur. Characters and symbols shall be permanently adhered or integral to sign face depicting the following : - stair name (DIN PRO bold) - if roof access is available (DIN PRO regular) - floor level (DIN PRO bold) - levels of stairs and exit to street level (DIN PRO regular) All characters to be raised and painted - Jalite 310 Photoluminescent paint system or equal. Grade 2 braille shall be raised per ADA/ ANSI specifications and same color as sign face - “Black”.
T9
ROOF ROOF ACCESS ACCESS
P12
LEVELS B - 3 EXIT ON LEVEL B
1
3/8”
4”
2 1/2”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ROOF ACC
B
T32
LEVELS LEVELS B -B3- 3 EXIT EXIT ONON LEVEL LEVEL BB 2
T8
STAIR B
ELEV: GRIDS & LAYOUT
T8
T8
LEVELS B EXIT ON L 3
SCALE: 6”=1’-0”
DESIGN MADE
SECTION SCALE: 6”=1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 58
B10 NOT USED
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 59
C1, C2 EXPLODED AXON - REFERENCE C1-1
C1-4
C1-2
C1-3
C1-10 C1-5 C1-8
C1-7
C1-6
DIAGONAL BRACING MAY OCCUR. FABRICATOR TO DETERmINE NECESSARY BRACING.
C1-11
C1-11
C1-9
C1-1
Metal nut welded to Unistrut.
C1-2
1 5/8”x 1 5/8” Unistrut with HS pattern.
C1-3
1/2” dia. solid metal rod. Finish to be blackened steel or powder-coat: black.
C1-4
2 1/2” dia. finished metal cover plate. Match finish to rod (C1-3).
C1-5
Metal base connection plate. Match finish to rod (C1-3).
C1-6
ALUM. FRAME: TOP HORIZONTAl: 2.5” X 1”x0.125” alum. tube BOTTOM HORIZONTAL & SIDES: 1”x1”x 0.125” C-Channel
C1-7
Bolts welded to frame.
C1-8
1/8” top plate. Finish to be blackened steel or powder-coat: black.
C1-9
1/8” alum. sign “box” with open top to be sleeved onto sign frame. Painted finish with screen-printed graphic.
C1-10
Hex nut. Match finish to rod (C1-3).
C1-11
Finish screw set flush to sign face. Finish is to be painted to match sign color.
C1-11
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 60
0
8
16
24
36
48
C1
0
C1-4
OVERHEAD LONG
C1-3
0
8
16
24
#7 SAME
3 SG87
56” 36
C1-5
48
C1-11
0
1 24
24
1
1
2”
14” 12”
SCREEN PRINTED
SOCIAL SERVICES
2
ELEV: OVERALL
SCALE: 3/4” = 1’-0”
PUBLIC HEALTH REGISTRATION
/ DE SALUD PÚBLICA DE REGISTRO
1” TYP.
2”
3
6 SAME
2-7
DETAIL
C1-5
8 - 11
SCALE: 6” = 1’-0”
DIA.= 2 1/2” DIA.= 1/2”
fastener holes
2-7
SOCIAL SERVICES
8 - 11
4
DETAIL
C1-5
SCALE: 6” = 1’-0”
T26
PUBLIC HEALTH REGISTRATION
C1-10
1”
/ DE SALUD PÚBLICA DE REGISTRO
12”
2-7
2”
8 - 11 C1-5 C1-8
C1-6 1/8”
C1-11 C1-6 C1-9 C1-9
C1-9
MIN. 1 1/4” MAX. 3/12”
T22
6
ELEV: GRIDS & LAYOUT
7
SECTION DETAIL SCALE: 6” = 1’-0”
SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
SOCIAL SERVICES C1-3
4”
5
SOCIAL SERVICES
12”
1
T35
P8
min. 1/4”, max. 1/2”
2 -PÚBLICA 7 8 - 11 / DE SALUD DE REGISTRO
/ DE SALUD PÚBLICA DE REGISTRO
SCALE: 3/4”= 1’-0” 2”
PUBLIC HEALTH REGISTRATION
+/- 3”
SCREEN PRINTED
PUBLIC HEALTH REGISTRATION
ELEV: SIGN VISUAL
C1-8
#
1
32”
P7
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
SECTION DETAIL SCALE: 6” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 61
36
48
48
C2
32” 36
48
0
8
16
24
36
48
0
32”
1 LTH HEALTH 2 - 7 RATION ON
UBLIC HEALTH EGISTRATION
PUBLIC HEALTH SOCIAL REGISTRATIONSERVICES
E SALUD PÚBLICA REGISTRO
SOCIAL SERVICES
P9
SOCIAL SOCIAL 8 - 112 - 7 SERVICES 8SERVICES - 11
/ DE SALUD PÚBLICA P8 DE REGISTRO
24
P5
SCREEN PRINTED
C1-4
SCREEN PRINTED
2 -27- 7 8 -811 - 11
UD ÚBLICA PÚBLICA UBLIC HEALTH TRO 1 EGISTRATION
E SALUD PÚBLICA REGISTRO
P7
1
2
ELEV: SIGN VISUAL
ELEV: SIGN VISUAL SCALE: 3/4”= 1’-0”
SCALE: 3/4”= 1’-0”
PUBLIC HEALTH SOCIAL REGISTRATIONSERVICES
2-7
2”
2”
SOCIAL SERVICES
8 - 112 - 7
/ DE 12” SALUD PÚBLICA DE REGISTRO
8 - 11
2” 2”
12”
C1-3 3” 2”
3 SG87
3”
#7 SG61
C1-5 C1-11
C1-8 12”
LTH HEALTH RATION ON
12”
SOCIAL SOCIAL SERVICES SERVICES
6 SAME
T26
UD ÚBLICA PÚBLICA TRO 1” TYP.
2”
2 -27- 7 8 -811 - 11 1” TYP.
2”
4”
4” T35
3
#
24
ELEV: GRIDS & LAYOUT SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
T35
4
ELEV: GRIDS & LAYOUT SCALE: 1 1/2” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
5
ELEV: OVERALL SCALE: 1 1/2” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 62
0
8
16
24
0
48 C3
C4-4
32”
0
36
8
16
24
36
48
OVERHEAD SPOT - COLUMN MOUNT
C4-3
0
16”
4-7
4-7 SCREEN
P8 PRINTED
24
1
4-7
SCALE: 1 1/2”= 1’-0” 6”
C3-1 C3-2
P7
ELEV: SIGN VISUAL
2”
21 - 25
6”
C3-4 C3-3
2
SIGN ELEV. IN SITU
21 - 25 SCALE: 1 1/2”= 1’-0”
C3-1
Blackened steel or black powder coated aluminum tube shape with rectangle holes to receive column strap clamp (C3-4).
C3-2
Provide neoprene or foam padding between column and C-sign.
21 - 25 C3-3
Neoprene or rubber seal between column and strap clamp (C3-4) to protect column and friction connection.
C3-4
Metal V-band coupling or strap assembly with neoprene or rubber seal by National Utilities Co. or approved alternate. V-band/strap finish to be satin finish to match column or black. Submit to Designer for sign-off.
2” C4-3 C4-4 C4-3 1 1/4” (max. 1 3/4”)
6”
24 2”
2”
4-7
21 - 25 C3-1 C3-2
C3-3 C3-4
BLDG. COLUMN BY OTHERS
C3-4
ELEV: GRIDS & LAYOUT
T35
4
SCALE: 3” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
PLAN SECTION
2
2 SG87
#
3
SCALE: 3”= 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 63
C4 EXPLODED AXON - REFERENCE
C4-1 C4-6
C4-7 C4-3
C4-1
Blackened steel or black powder coated aluminum “j” shape with holes to fasten to building stone tile wall. Signage manufacturer and installer to determine optimum anchor solution and coordinate with Architect and building Contractor.
C4-2
Hex head anchor bolts with black oxide finish or powdercoated to match part C4-1.
C4-3
1/8” aluminum frame made from “c” channel shapes or other light-weight best practice method. Parts C4-4 and C4-5 are welded to frame and connections are continuous and ground smooth to read as singole box. Full assembly is painted single base color.
C4-4
1/8” alum. sign “box” with open top to be sleeved onto sign frame. Painted finish with screen-printed graphic.
C4-5
NOT USED
C4-6
Hex head nuts with black oxide finish or powder-coated to match part C4-1.
C4-7
Hex head bolts with black oxide finish or powder-coated to match part C4-1.
C4-2 C4-4
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 64
0 0
C4
1 1/4”
32” 8
16
24
48LINES
INDICATE INTERNAL STRUCTURE
36
OVERHEAD SPOT - WALL MOUNT 1 1/4” (max. 1 3/4”)
0
16”
bldg. stone tile
27 - 29
27 - 29 SCREEN
P5 PRINTED
1
SCALE: 1 1/2”= 1’-0”
24
2”
2”
27 - 29 6”
10 - 11
C4-2
10 - 1
+/- 11”
P9
ELEV: SIGN VISUAL
C4-1
2
ELEV: SCALE: 1 1/2”= 1’-0”
DIM. COORDINATES TO HEIGHT OF STONE TILE
Z6 6”
7”
3
SECTION SCALE: 3”= 1’-0”
6”
24
bldg. stone tile ALIGN TO EDGE OF TILE
27 - 29
2”
C4-6/7
C4-4 C4-1 ANCHOR BOLTS, TO BE ENGINEERED BY FABRICATOR
ELEV: LAYOUT & GRID
5
SCALE: 3”= 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
3 SAME
bldg. CONC. BLOCk
T35 4
3 SAME
#
C4-2
#
2”
PLAN SECTION SCALE: 3”= 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 65
D1-01 EXPLODED AXON - REFERENCE DIRECTORY MONOLITH 1 D1-1 D1-2
Epoxy anchor bolts in concrete slab or poured concrete footing. Engineering provided by Signage manufacturer and installer.
D1-3
Metal base plate. NOTE: Design assumes structural frame welding sign post to base plate. Signage Manufacturer should discuss with designer during engineering to coordinate design intent with Contractor’s solution.
D1-19
D1-4 D1-5
Steel washer and hex nuts to secure frame to base condition.
D1-18
D1-6
Aluminum hollow tube frame. Engineering provided by Signage manufacturer and installer.
D1-7
Metal flange welded to side of frame. Flange connects to monitor bracket. Allow for easy monitor repair and replacement.
D1-8 D1-9 D1-10
Metal bolts with washer and hex nut fasteners to secure monitor bracket to flange. Engineering provided by Signage manufacturer and installer.
D1-11
Minimum 10-13 gauge clear satin anodized aluminum top face panel secured to frame. A perforated/ wire mesh inset screen shall occur for venting for LCD monitor. Provide samples to Designer for approval.
D1-12
Minimum 10-13 gauge clear satin anodized aluminum side face panel secured to frame. Fasteners shall be set flush to panel face and finished to match.
D1-13
Light gauge metal end cap with custom continuous bends. Finish shall be powder-coated - color varies. Part has no fasteners and snaps into frame connection. Part is removable to access modular sign system cover profiles.
D1-14
Samsung 460UX 46” LCD monitor with minimal bezel with built-in video wall processor.
D1-15 D1-15
Metal monitor bracket and fasteners to set and secure monitor in place. Bracket and fastener size shall be coordinated to monitor and engineering provided by Signage manufacturer and installer.
D1-17
Satin clear satin anodized aluminum rail fastened secure to frame to receive end cap (D1-13).
D1-18 D1-20
Minimum 10-13 gauge clear satin anodized aluminum face panels secured to frame. Fasteners shall be concealed.
D1-19
Minimum 10-13 gauge clear satin anodized aluminum removable access panel(s) secured to frame. Fasteners shall be set flush to panel face and finished to match. Panel(s) shall have perforated holes for air vent - see drawings for location and pattern.
D1-21
Minimum 10-13 gauge clear satin anodized aluminum face panels secured to frame. Panel is laser or waterjet cut for monitor opening. Opening to be 1/8” in from monitor bezel so as to conceal bezel. Fasteners shall be concealed.
D1-16 D1-11 D1-12 D1-17
D1-15 D1-14 D1-22
D1-10
D1-21
D1-9
D1-18
D1-7
D1-25
D1-8
D1-6
D1-13
D1-5 D1-4 D1-3 D1-2 D1-20
D1-1
D1-23 D1-24
D1-22
0.118” colorless Anti-Reflective acrylic sheet by Acrylite® or approved equal cut to size. Acrylic face shall be routed to have face set flush to aluminum face panel (D1-22).
D1-23
Modular sign system by Infonorm® or Systech with removable profile plates. Finish is standard anodized aluminum. Characters are standard laser-engraved with paint-fill - color varies. End caps are standard T-bar with same anodized aluminum finish with security locking device.
D1-24
D1-25
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
Modular sign system cover profile by Infonorm® or Systech. Finish is satin clear anodized aluminum to closest match to aluminum face panels and lettering is laserengraved with paint fill - color: black. 1/2” thick acrylic or metal dimensional letters painted and permanently adhered/fastened to sign cabinet face (D1-21).
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 66
D1-02 EXPLODED AXON - REFERENCE DIRECTORY MONOLITH 2 D1-#
SEE SHEET SG-66 FOR PART DESCRIPTIONS.
D1-10 D1-9
D1-16
D1-7 D1-11
D1-17
D1-19
D1-8
D1-12
D1-19
D1-19
D1-22 D1-18
D1-21 D1-15 D1-14
D1-6
D1-13
D1-5 D1-4 D1-3 D1-2 D1-20
D1-1
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 67
D1 D1-14 0
8
16
D1-14
24
36
48
BUILDING DIRECTORY VISUAL
D1-14
60
96
120
8’-0” T.O. SIGN
Public Health TIME 8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
Social Services
MEETING
ROOM
TIME
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
PUBLIC HEALTH DEPARTMENT / DEPARTAMENTO DE SALUD PÚBLICA 0
8
16
24
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
The Durham Center welcomes
MEETING
ROOM
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
MANAGING BEHAVIORAL HEALTH & DISABILITY SERVICES
FIRST FLOOR / PRIMER PLANTA
SECOND FLOOR / SEGUNDO PLANTA
PUBLIC HEALTH REGISTRATION / CONTROL DE SALUD PÚBLICA
8
RESOURCE/ JOB-LINK CENTER / RECURSOS / JOB-LINK CENTRO
2100
1
PUBLIC HEALTH CHECK-OUT / DE SALUD PÚBLICA DE REGISTRO
9
MEDICAID LOBBY / RECEPCION DE MEDICAID
THE DURHAM CENTER MANAGING BEHAVIORAL HEALTH & DISABILITY SERVICES
2
W.I.C. CLINIC / W.I.C. CLÍNICA
FOOD AND NUTRITION SERVICES LOBBY / ALIMENTACIÓN Y NUTRICIÓN RECEPCION DE SERVICIOS
2200
LOREM ISPUM SUD NOUM
3
PHARMACY WAITING / FARMACIA DE ESPERA
11
CHILD SUPPORT LOBBY / RECEPCION DE APOYO AL NIÑO
2200
LOREM ROOM
4
LABORATORY WAITING / LABORATORIO DE ESPERA
LOREM ROOM
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
SS TRAINING ROOM A SS TRAINING ROOM B
2200
5
1426 1428
2200
LOREM ROOM
6
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS
SECOND FLOOR / SEGUNDO PLANTA
2200
LOREM ROOM
7
IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
27
2200
LOREM ROOM
SECOND FLOOR / SEGUNDO PLANTA
28
21
DENTAL CLINIC
22
WOMEN’S CLINIC / CLÍNICA DE LA MUJER
2420 2421 2422 2423 2424 2425 2301
SS CONFERENCE A SS CONFERENCE B SS CONFERENCE C SS CONFERENCE D SS CONFERENCE E SS CONFERENCE F SS TRAINING ROOM C
/ CLÍNICA DENTAL
23
NUTRITION CLINIC / NUTRICIÓN CLÍNICA
24
OBSTETRICIAN ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES
25
ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY
- 10:00 AM - 8:30 AM - 11:00 AM - 12:00 PM - 12:30 AM - 2:30 PM - 3:00 PM - 3:00 PM - 4:30 PM - 4:00 PM - 4:30 PM - 5:45 PM
MEETING
ROOM
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
A B A B C A A B A C B A
D1-02 DIRECTORY MONOLITH 2
D1-14
Durham Open Trails Meeting Today
THE DURHAM CENTER
1
WORK FIRST & COMMUNITY INITIATIVES LOBBY / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS RECEPCION ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
Please check-in at The Duraham Center Lobby
FIRST FLOOR / PRIMER PLANTA
10
County Wide Meeting Roms TIME
Lorem Ipsum Sales Representatives
SOCIAL SERVICES DEPARTMENT / DEPARTAMENTO DE SERVICIOS SOCIALES
D1-01 DIRECTORY MONOLITH 1
County Wide Meeting Room A 3:00 - 4:00 PM
D1-14
D1-14
THIRD FLOOR / TERCER PLANTA
THIRD FLOOR / TERCER PLANTA
32
JOB WELFARE LOBBY / RECEPCION DE TRABAJO DE BIENESTAR
31
VITAL RECORDS LOBBY / VITAL REGISTRO LOBBY
34
CHILD WELFARE LOBBY
33
PUBLIC HEALTH ADMINISTRATIVE LOBBY / SALUD PÚBLICA DE ADMINISTRACIÓN LOBBY
3#
SOCIAL SERVICES ADMINISTRATIVE LOBBY / SERVICIOS SOCIALES DE ADMINISTRACIÓN LOBBY
D1-23
/ RECEPCION DE BIENESTAR DEL NIÑO
D1-23
D1-23
48
60
0’-0” T.O.F.F. M1
P7
D1-01 1
M1
D1-01
FRONT ELEV: SIGN VISUAL SCALE: 3/4” = 1’-0”
P9
PLAN
1” - 2”
M1
P11
D1-02 5”
5”
5”
P10
D1-01
3 7/8”
2
M1
3 7/8”
3 7/8”
NOTE: DIMENSIONS ON DWG. #2 SUBJECT TO CHANGE PENDING REVIEW AT FULL SCALE TO CHECK SUFFICIENT ROOM TO REMOVE CAP AND ACCESS MODULAR SIGN SYSTEM.
1” - 2”
1” - 2”
SCALE: 3/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 68
D1-01 1 SG72
BUILDING DIRECTORY note: coordinate with modular system standard widths including end caps.
40” 2”
34 7/8”
2 7/16”
2”
LINES INDICATE LOCATION OF LCD MONITOR (D1-14)
1 1/8”
8”
2A SG73
30 11/16” D1-15
19 5/8”
D1-14
29 9/16”
2B
D1-21
D1-19
SG73
D1-6
SG73
94” 2C
17 1/8” D1-19 4
3
SG71
33 13/16” D1-23 17 1/8”
D1-19
2D SG73
D1-20
D1-19
14 1/4”
D1-13
D1-13 14 1/4”
D1-2 2D
BASE CONDITION TO BE EngineerED by Signage manufacturer and installer.
D1-1/3
2”
1
FRONT ELEV: D1-01 SCALE: 3/4” = 1’-0”
2
SECTION: D1-01
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
D1-1/3
3
SCALE: 3/4” = 1’-0”
SIDE ELEV: D1-01 SCALE: 3/4” = 1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
SG73
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
4
SECTION: D1-01 SCALE: 3/4” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 69
D1-02 BUILDING DIRECTORY
1 SG72
40” 2”
34 7/8”
2 3/8”
2”
LINES INDICATE LOCATION OF LCD MONITOR (D1-14)
1 1/8”
8”
2A
D1-9
SG73
D1-15 D1-14
D1-14
22 1/6”
61 1/2” D1-19
65 11/16” 94”
D1-14 D1-19
D1-14 20 15/16” 2
3
SG71
D1-14 D1-14
22 1/16”
D1-19
2B SG73
1 13/16” D1-20
SIM.
12 13/16” D1-13
D1-18 D1-13
30”
14 1/2”
D1-2 2D
D1-1/3
2”
1
FRONT ELEV: D1-02 SCALE: 3/4” = 1’-0”
SG73
BASE CONDITION TO BE EngineerED by Signage manufacturer and installer.
2
SECTION: D1-02
3
SCALE: 3/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
SIDE ELEV: D1-02 SCALE: 3/4” = 1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
4
SECTION: D1-02 SCALE: 3/4” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 70
D1 1 SG72
1
note: coordinate with modular system standard widths including end caps.
SG72
8”
33 7/8”
8”
33 7/8”
D1-19
D1-19
30 11/16”
D1-12
22 11/16”
routed grill air vent
94”
routed grill air vent
94”
D1-19
21”
2
BUILDING DIRECTORY
33 5/16”
SAME
3
4
3
SG69
SAME
SG70
22 1/16”
D1-18
D1-12
D1-19
D1-12
D1-18
D1-12
D1-12
30” 28 5/16”
D1-18
1
REAR ELEV: D1-01 SCALE: 3/4” = 1’-0”
D1-12
2
SIDE ELEV: D1-01
3
SCALE: 3/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
REAR ELEV: D1-02 SCALE: 3/4” = 1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
4
SIDE ELEV: D1-02 SCALE: 3/4” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 71
D1 BUILDING DIRECTORY
inset perforated/ wire mesh screen 1 1/2”
D1-19
1 1/2”
1 1/2”
D1-7
1 1/2”
D1-17
1
TOP VIEW: D1-01/D1-02 SCALE: 1 1/2” = 1’-0”
4
4
SG69
SG70
D1-11
D1-6
D1-13
D1-15
D1-14
SIMILAR
D1-13
D1-21 4
D1-22
SAME
4
PLAN DETAIL: D1-01/ D1-02 SCALE: 3” = 1’-0”
2
2
SG69
SG70
D1-18
SIMILAR 3/16”
2
1”
1/8” r
D1-17
PLAN SECTION: D1-01/D1-02 SCALE: 1 1/2” = 1’-0”
D1-6
5 SAME
D1-2 D1-13 D1-20
D1-23
3
PLAN SECTION: D1-01/D1-02
5
SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
PLAN DETAIL: D1-01/ D1-02 SCALE: 3” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 72
D1 line indicates location of lcd monitor (d1-14)
BUILDING DIRECTORY
D1-11
D1-11
D1-6
D1-6
D1-19
D1-14
D1-7
D1-7
D1-15
D1-15
D1-13
D1-19
1A
D1-22
2A
D1-7
D1-7
D1-15
D1-15 D1-19
D1-19
D1-14
D1-13
D1-25
1B
2B D1-6
D1-18 D1-6
D1-13
D1-23
1C
2C D1-23 D1-13 D1-6
1D
2D
D1-2
D1-6
D1-6
D1-13
D1-18 D1-3
D1-3
D1-1
D1-1
1E 1
2E SECTION: D1-01/D1-02
2
SCALE: 3/4” = 1’-0”
SCALE: 3/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
SECTION: D1-01/D1-02
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 73
/ DEPARTAMENTO DE SALUD PÚBLICA Public Health
T5
TIME
ROOM
TIME
Breakfast T4 Session P6 Lorem Ipsum Sed Novum Illie Dolor Sit Amet T5 P6 Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
T4
FIRST FLOOR / PRIMER PLANTA
P6
T6
1
PUBLIC HEALTH REGISTRATION / CONTROL DE SALUD PÚBLICA
1
PUBLIC HEALTH CHECK-OUT / DE SALUD PÚBLICA DE REGISTRO
2
W.I.C. CLINIC / W.I.C. CLÍNICA
0
8
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
3
PHARMACY WAITING / FARMACIA DE ESPERA
4
LABORATORY WAITING / LABORATORIO DE ESPERA
5
1.25” TUBERCULOSIS 1” 5.1875” 1.25”
6 7
CLINIC
PUBLIC DEPARTMENT / CLÍNICA HEALTH DE TUBERCULOSIS / DEPARTAMENTO DE SALUD PÚBLICA
ADULT HEALTH 1.75” CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS 1.625”
PUBLIC HEALTH REGISTRATION / CONTROL DE SALUD PÚBLICA IMMUNIZATION 1.625” CLINIC 1/ CLÍNICA DE VACUNACIÓN 0
1
2 SECOND FLOOR / SEGUNDO PLANTA 1.625” 3
1.625”
22 24 25
33.8125”
7
1.625”
IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
SECOND FLOOR / SEGUNDO PLANTA NUTRITION1.625” CLINIC / NUTRICIÓN CLÍNICA
1.625”
21
16
DENTAL CLINIC
/ CLÍNICA DENTAL
WOMEN’S CLINIC/ / OBSTETRA CLÍNICA DE LA MUJERORIENTACIÓN HABITACIONES 22 OBSTETRICIAN ROOM 1.625” ORIENTATION
23
1.625”
NUTRITION CLINIC / NUTRICIÓN CLÍNICA
25
1.625”
THIRD FLOOR / TERCER 1.625” PLANTA 24 1.625”
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
9
MEDICAID LOBBY / REC
10
FOOD AND NUTRITION Social Services S
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
48
MEETING - 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
11
1426 1428
SS TRAINING ROOM A SS TRAINING ROOM B
SOCIAL SERVICES DE
0
FIRST FLOOR / PRIMER PLANTA
FIRST FLOOR / PRIMER PLANTA
1
8
RESOURCE/ JOB-LINK CENTER / RECURS
PUBLIC HEALTH CHECK-OUT / DE SALUD PÚBLICA DE REGISTRO
9
MEDICAID LOBBY / RECEPCION DE MEDIC
10
PUBLIC HEALTH REGISTRATION / CONTROL DE SALUD PÚBLICA
WORK FIRST & COMMUN 27 D1-23 MEDICAID LOBBY / RECEPCION DE MEDICAID / PRIMER TRABAJO E INI FOOD AND NUTRITION SERVICES LOBBY / ALIMENTACIÓN Y NUTRICIÓN RECEPCION DE SERVICIOS ADULT AND CRISIS SERV 28 2
W.I.C. CLINIC / W.I.C. CLÍNICA
9
3
PHARMACY WAITING / FARMACIA DE ESPERA
11
CHILD SUPPORT LOBBY / RECEPCION DE
4
LABORATORY WAITING / LABORATORIO DE ESPERA
5
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
1426 1428
SS TRAINING ROOM A SS TRAINING ROOM B
6
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS
8
FOOD AND NUTRITION SERVICES LOBBY /
SECOND FLOOR / SEGUNDO PLANTA
7 CHILD SUPPORT LOBBY / RECEPCION DE APOYO AL NIÑO
27
IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
SECOND FLOOR / SEGUNDO PLANTA
28
WORK FIRST & COMMUNITY INITIATIVES L / PRIMER TRABAJO E INICIATIVAS COMUN ADULT AND CRISIS SERVICES LOBBY / DE
21
DENTAL CLINIC
22
WOMEN’S CLINIC / CLÍNICA DE LA MUJER
23
NUTRITION CLINIC / NUTRICIÓN CLÍNICA
24
OBSTETRICIAN ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES
2420 2421 2422 2423 2424 2425 2301
SS CONFERENCE A SS CONFERENCE B SS CONFERENCE C SS CONFERENCE D SS CONFERENCE E SS CONFERENCE F SS TRAINING ROOM C
25
ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY
2420 SS CONFERENCE A 2421 SS CONFERENCE B COVER PROFILES SLIDE-OUT TOFLOOR RIGHT SECOND / SEGUNDO PLANTA 2422 SS CONFERENCE C AFTER END CAP IS REMOVED. WORK FIRST & COMMUNITY INITIATIVES LOBBY 27 2423 SS CONFERENCE D / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS RECEPCION ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS CRISIS 28 2424DE RECEPCION SSDECONFERENCE E 2420 SS CONFERENCE A 1 2425 SS CONFERENCE F 2421 SS CONFERENCE B 2422 SS CONFERENCE C 2301 SS TRAINING ROOM C 2423 SS CONFERENCE D SS TRAINING ROOM A SS TRAINING ROOM B
16
24
SS CONFERENCE E SS CONFERENCE F SS TRAINING ROOM C
ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY
THIRD FLOOR / TERCER PLANTA
/ CLÍNICA DENTAL
THIRD FLOOR / TERCER PLANTA
THIRD FLOOR / TERCER PLANTA
32
JOB WELFARE LOBBY / RECEPCION DE TR
31
VITAL RECORDS LOBBY / VITAL REGISTRO LOBBY
34
CHILD WELFARE LOBBY
33
PUBLIC HEALTH ADMINISTRATIVE LOBBY / SALUD PÚBLICA DE ADMINISTRACIÓN LOBBY
3#
SOCIAL SERVICES ADMINISTRATIVE LOBB
THIRD FLOOR / TERCER PLANTA
32
JOB WELFARE LOBBY / 48RECEPCION DE TRABAJO DE BIENESTAR
VITAL RECORDS LOBBY / VITAL REGISTRO LOBBY
PUBLIC HEALTH ADMINISTRATIVE LOBBY VITAL RECORDS / VITAL REGISTRO LOBBY 1.625” LOBBY 33
33
PUBLIC HEALTH ADMINISTRATIVE LOBBY / SALUD PÚBLICA DE ADMINISTRACIÓN LOBBY 1.625” t-bar standard an-
/ SALUD PÚBLICA DE ADMINISTRACIÓN LOBBY
34
1.625”
60
odized finish endcap with security locking device, typ. both ends
3#
SOCIAL SERVICES ADMIN
38.875”
D1-01 - PUBLIC HEALTH PARTIAL ELEV: SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS 48 AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
/ RECEPCION D
32 anodized JOB WELFARE LOBBY / standard finish profile with CHILD WELFARE LOBBY / RECEPCION DE BIENESTAR DEL NIÑO laser 34 engraved/ routed SOCIAL SERVICES ADMINISTRATIVE LOBBY / SERVICIOS SOCIALES DE ADMINISTRACIÓN 3#lettering CHILDLOBBY WELFARE LOBBY and paint fill, typ.
31
1
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat W Condimentum Commodo Ornare Sed Vitae Sit Vest Vestibulum interd Evening Session Lorem Ipsum Sed Interdum magna
CHILD SUPPORT LOBBY
RESOURCE/ JOB-LINK CENTER /1 RECURSOS / JOB-LINK CENTRO
2424 2425 2301
THIRD FLOOR / TERCER PLANTA
31
D1-24
OBSTETRICIAN ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES
24 LOBBY / SALUD AMBIENTAL LOBBY ENVIRONMENTAL HEALTH 1.625”
TIME
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
RESOURCE/ JOB-LINK C
8
1426 1428
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
8
/ DEPARTAMENTO DE SECOND FLOOR / SEGUNDO PLAN
11
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS 6 WOMEN’S 1.625” CLINIC / CLÍNICA DE LA MUJER
1.625”
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
2200 1600 1150 2400 2200 1710 36 2200 2100 1710 2100 ROOM 2400
/ DEPARTAMENTO DE SALUD PÚBLICA
PHARMACY WAITING / FARMACIA DE ESPERA / LABORATORIO DE ESPERA
Lorem Ipsum Sed D1-01 Novum Illie Dolor Sit Amet DIRECTORY MONOLITH 1 Vestibulum Erat Wisi Amet Wisi PUBLIC HEALTH DEPARTMENT Condimentum Commodo Ornare 0 8 16 24 Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Public Sed Health Interdum magna sed TIME MEETING
P8
10
LABORATORY WAITING 4 / CLÍNICA DENTAL
5
T13
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
SOCIAL SERVICES DEPARTMENT PUBLIC DEPARTMENTSOCIALES D1-25 /P8DEPARTAMENTO DE HEALTH SERVICIOS
W.I.C. CLINIC / W.I.C. CLÍNICA
DENTAL CLINIC 1.625”
23
24
PUBLIC HEALTH CHECK-OUT / DE SALUD PÚBLICA DE REGISTRO
21
8
T12
BUILDING DIRECTORY ROOM CONTENT LAYOUT Breakfast Session 2100/ PRIMER PLANTA FIRST FLOOR
MEETING
FIRST FLOOR / PRIMER PLANTA
FIRST FLOOR / PRIMER PLANTA
1.625”
16
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
Social Services
MEETING
P13
/ DEPARTAMEN
D1
P13
2
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
D1-01 - PUBLIC HEALTH ELEV: SIGN VISUAL SCALE: 3/4” = 1’-0” REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 74
A
Public Health TIME 8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
MEETING - 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
/ DEPARTAMENTO DE SERVICIOS SOCIALES T5 Social Services
ROOM
TIME
2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
FIRST FLOOR2100 / PRIMER PLANTA
Breakfast Session P13 T4 Lorem Ipsum Sed Novum Illie Dolor Sit Amet P6 T6 Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
MEETING
ROOM
Breakfast T4Session P6 Lorem Ipsum Sed Novum Illie Dolor Sit Amet T5 P6 Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
BUILDING DIRECTORY CONTENT LAYOUT Lorem Ipsum Sales Representatives SECOND FLOOR / SEGUNDO PLAN D1-01
RESOURCE/ JOB-LINK CENTER / RECURSOS / JOB-LINK CENTRO
9
MEDICAID LOBBY / RECEPCION DE MEDICAID
10
FOOD AND NUTRITION SERVICES LOBBY / ALIMENTACIÓN Y NUTRICIÓN RECEPCIONPublic DEHealth SERVICIOS
11
CHILD SUPPORT LOBBY / RECEPCION DE APOYO AL NIÑO
1426 1428
SS TRAINING ROOM A SS TRAINING ROOM B
Please check-in at The Duraham Center Lobby 2100 DIRECTORY MONOLITH 1 0
FIRST FLOOR / PRIMER PLANTA
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
8
16
24
LOBBY
27
1
PUBLIC HEALTH REGISTRATION / CONTROL DE SALUD PÚBLICA
1
PUBLIC HEALTH CHECK-OUT / DE SALUD PÚBLICA DE REGISTRO W.I.C. CLINIC / W.I.C. CLÍNICA
3
PHARMACY WAITING / FARMACIA DE ESPERA
28
2420 TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS 5 2421 ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS 6 2422 IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN 7 2423 SECOND FLOOR / SEGUNDO PLANTA 2424 DENTAL CLINIC / CLÍNICA DENTAL 21 2425 WOMEN’S CLINIC / CLÍNICA DE LA MUJER 22 2301 4
LABORATORY WAITING / LABORATORIO DE ESPERA
0
8
1.625”
0.8125” SS CONFERENCE A 0.8125” 0.8125” SS CONFERENCE B 0.8125” SS CONFERENCE 1.625” C SS CONFERENCE 1.625” D 33.8125” SS CONFERENCE 1.625” E 0.8125” SS CONFERENCE F 0.8125” 0.8125” SS TRAINING ROOM C 0.8125”
NUTRITION CLINIC / NUTRICIÓN CLÍNICA
24
OBSTETRICIAN ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES
25
ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY
11
CHILD SUPPORT LOBBY / RECEPCION DE APOYO AL NIÑO
1426 1428
SS TRAINING ROOM A SS TRAINING ROOM B
16
27
0.8125” 0.8125” 0.8125” 0.8125”
28
WORK FIRST & COMMUNITY INITIATIVES LOBBY / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS RECEPCION ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS
2420 2421 2422 2423 2424 2425 2301
SS CONFERENCE A SS CONFERENCE B SS CONFERENCE C SS CONFERENCE D SS CONFERENCE E SS CONFERENCE F SS TRAINING ROOM C
33
PUBLIC HEALTH ADMINISTRATIVE LOBBY / SALUD PÚBLICA DE ADMINISTRACIÓN LOBBY
60
Social Services TIME
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
T12
P9
2200
MEETING - 10:00 AM - 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
-
LOREM ISPUM NOU TheSUD Durham Cent ROOM
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
2200 2200
THE DURHAM CENTER
96
2200
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
SECOND FLOOR / SEGUNDO PLANTA
PUBLIC HEALTH REGISTRATION / CONTROL DE SALUD PÚBLICA
1
PUBLIC HEALTH CHECK-OUT / DE SALUD PÚBLICA DE REGISTRO
2100
2
W.I.C. CLINIC / W.I.C. CLÍNICA
3
PHARMACY WAITING / FARMACIA DE ESPERA
4
LABORATORY WAITING / LABORATORIO DE ESPERA
5
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
6
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS
7
IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
2200
D1-24
LOREM ROOM
2200
LOREM ROOM
2200
LOREM ROOM
2200
LOREM ROOM
21
DENTAL CLINIC
22
WOMEN’S CLINIC / CLÍNICA DE LA MUJER
23
NUTRITION CLINIC / NUTRICIÓN CLÍNICA
24
OBSTETRICIAN ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES
25
ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY
/ CLÍNICA DENTAL
FIRST FLOOR / PRIMER PLANTA
SECOND FLOOR / SEGUNDO PLANTA 2100
THE DURHAM CENTER MANAGING BEHAVIORAL HEALTH & DISA
RESOURCE/ JOB-LINK CENTER / RECURSOS / JOB-LINK CENTRO MEDICAID LOBBY / RECEPCION DE MEDICAID
LOREM ISPUM SUD NOUM
COVER PROFILES SLIDE-OUT RIGHTROOM 2200 TO LOREM AFTER END CAP IS REMOVED. 2200 LOREM ROOM
2200
LOREM ROOM 2200
LOREM ISPUM SUD NOUM
11
CHILD SUPPORT LOBBY / RECEPCION DE APOYO AL NIÑO
2200
LOREM ROOM
1426 1428
SS TRAINING ROOM A SS TRAINING ROOM B
2200
LOREM ROOM
2200
LOREM ROOM
SECOND FLOOR / SEGUNDO PLANTA
2200
LOREM ROOM
27
2200
LOREM ROOM
28
WORK FIRST & COMMUNITY INITIATIVES LOBBY / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS RECEPCION ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS
2420 2421 2422 2423 2424 2425 2301
SS CONFERENCE A SS CONFERENCE B SS CONFERENCE C SS CONFERENCE D SS CONFERENCE E SS CONFERENCE F SS TRAINING ROOM C
THIRD FLOOR / TERCER PLANTA
32
JOB WELFARE LOBBY / RECEPCION DE TRABAJO DE BIENESTAR
31
VITAL RECORDS LOBBY / VITAL REGISTRO LOBBY
34
CHILD WELFARE LOBBY
33
PUBLIC HEALTH ADMINISTRATIVE LOBBY / SALUD PÚBLICA DE ADMINISTRACIÓN LOBBY
3#
SOCIAL SERVICES ADMINISTRATIVE LOBBY / SERVICIOS SOCIALES DE ADMINISTRACIÓN LOBBY
THIRD FLOOR / TERCER PLANTA
THE DURHAM CENTE
MANAGING BEHAVIORAL HEAL ROOM
8
9 THE DURHAM CENTER FOOD AND NUTRITION SERVICES LOBBY / ALIMENTACIÓN Y NUTRICIÓN RECEPCION DE SERVICIOS 10 MANAGING BEHAVIORAL HEALTH & DISABILITY SERVICES
D1-23
Please check-in at The Duraha
LOREM ROOM
MANAGINGD1-25 BEHAVIORALSOCIAL HEALTH & DISABILITY SERVICES DEPARTMENTSERVICES PUBLIC HEALTH DEPARTMENT T13 P9 PÚBLICA / DEPARTAMENTO DE SALUD / DEPARTAMENTO DE SERVICIOS 2200 SOCIALES LOREM 1
Lorem Ipsum Sales Rep
LOREM ROOM
/ RECEPCION DE BIENESTAR DEL NIÑO
1
JOB WELFAREDE LOBBYTRABAJO / RECEPCION DE TRABAJO DE BIENESTAR 32 JOB WELFARE DE BIENESTAR 1.625”LOBBY / RECEPCION
VITAL RECORDS LOBBY / VITAL REGISTRO LOBBY
48
THIRD FLOOR / TERCER PLANTA
1.625”
31
24
36
ROOM
SECOND FLOOR / SEGUNDO PLANTA
SECOND FLOOR / SEGUNDO PLANTA
THIRD FLOOR / TERCER PLANTA
32
- 10:00 AM - 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
-
24
MEETING
RESOURCE/ JOB-LINKLOBBY CENTER / RECURSOS / JOB-LINK CENTRO 8 WORK FIRST & COMMUNITY INITIATIVES 1.625” MEDICAID LOBBY / RECEPCION DE MEDICAID 9 / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS RECEPCION 1.625” FOOD AND NUTRITION SERVICES LOBBY / ALIMENTACIÓN Y NUTRICIÓNDE RECEPCION DE SERVICIOS 10 ADULT AND1.625” CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS RECEPCION DE CRISIS
23
THIRD FLOOR / TERCER PLANTA
16
FIRST FLOOR / PRIMER PLANTA
FIRST FLOOR / PRIMER PLANTA
1.625”
8
TIME
SOCIAL SERVICES DEPARTMENT / DEPARTAMENTO DE SERVICIOS SOCIALES
1.25” 1” 1.25”
THE DURHAM CENTER BEHAVIORAL
SOCIAL SERVICES DEPARTMENTMANAGING
SECOND FLOOR / SEGUNDO PLANTA 1.75”
2
The DurhamD1 Center welcomes
P13
8
PUBLIC HEALTH DEPARTMENT 5.1875” / DEPARTAMENTO DE SALUD PÚBLICA 0
MANAGING BEHAVIO
34
1.625”
CHILD WELFARE LOBBY
48
/ RECEPCION DE BIENESTAR DEL NIÑO
standard anodized finish profile with laser engraved/ routed lettering and paint fill, typ.
34
CHILD WELFARE 1.625” LOBBY
3#
SOCIAL SERVICES ADMINISTRATIVE LOBBY / SERVICIOS SOCIALES DE ADMINISTRACIÓN t-bar LOBBY 1.625” standard an-
3#/
SOCIAL SERVICES ADMINISTRATIVE LOBBY / SERVICIOS SOCIALES DE ADMINISTRACIÓN LOBBY RECEPCION DE BIENESTAR DEL NIÑO
1.625”
60
odized finish endcap with security locking device, typ. both ends
38.875”
1
48
D1-01 - SOCIAL SERVICES PARTIAL ELEV: SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
2
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
D1-01 - PUBLIC HEALTH ELEV: SIGN VISUAL SCALE: 3/4” = 1’-0” REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 75
ALES
MANAGING BEHAVIORAL HEALTH & DISABILITY SERVICES T5
Social Services TIME
MEETING
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
DE SERVICIOS
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
P13
The Durham Center welcomes T4
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam P6Session T5 Evening Lorem Ipsum Sed Interdum magna sed
ROOM SECOND FLOOR / SEGUNDO PLANTA 2100
2100
2200 2200 2200
2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
Lorem Ipsum SalesT4Representatives P6
0
LOREM ISPUM SUD NOUM
8
2200 RESOURCE/ JOB-LINK CENTER / RECURSOS / JOB-LINK CENTRO
9
MEDICAID LOBBY / RECEPCION DE MEDICAID
LOREM ROOM
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
CHILD SUPPORT LOBBY / RECEPCION DE APOYO AL NIÑO
1426 1428
SS TRAINING ROOM A SS TRAINING ROOM B
SS CONFERENCE A SS CONFERENCE B SS CONFERENCE C SS CONFERENCE D SS CONFERENCE E SS CONFERENCE F SS TRAINING ROOM C
- 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
Social Services ROOM
TIME
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
/ DEPARTAMENTO DE SALUD PÚBLICA SECOND FLOOR / SEGUNDO PLANTA 0 2100
MEETING - 10:00 AM - 8:30 AM - 10:00 AM - 10:00 PM - 10:30 AM - 12:30 PM - 2:00 PM - 2:00 PM - 2:30 PM - 3:00 PM - 3:30 PM - 3:45 PM
1.625”
0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125” 0.8125”
2200
LOREM ISPUM SUD NOUM
2200
LOREM ROOM
2200
LOREM ROOM
2200
LOREM ROOM
2200
LOREM ROOM
2200
LOREM ROOM
16
24
2100 2200 1600 1150 2400 2200 1710 2200 2100 1710 2100 2400
County Wide M 3:00 - 4:00 PM
Lorem Ipsum Sed Novum Illie D1-01 Dolor Sit Amet DIRECTORY MONOLITH 1 Vestibulum Erat Wisi Amet Wisi SOCIAL SERVICES DEPARTMENT Condimentum Commodo Ornare 96 Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum The Sed Durham Center welcomes Interdum magna sed Lorem Ipsum Sales Representatives
FIRST FLOOR / PRIMER PLANTA RESOURCE/ JOB-LINK CENTER / RECURSOS / JOB-LINK CENTRO
9
MEDICAID LOBBY / RECEPCION DE MEDICAID
THE DURHAM CENTER
MANAGING BEHAVIORAL HEALTH & DISABILITY SERVICES SECOND FLOOR / SEGUNDO PLANTA 2100
THE DURHAM CENTER MANAGING BEHAVIORAL HEALTH & DISABILITY SERVICES
FOOD AND NUTRITION SERVICES LOBBY / ALIMENTACIÓN Y NUTRICIÓN RECEPCION DE SERVICIOS
2200
LOREM ISPUM SUD NOUM
PHARMACY WAITING / FARMACIA DE ESPERA
11
CHILD SUPPORT LOBBY / RECEPCION DE APOYO AL NIÑO
2200
LOREM ROOM
4
LABORATORY WAITING / LABORATORIO DE ESPERA
LOREM ROOM
TUBERCULOSIS CLINIC / CLÍNICA DE TUBERCULOSIS
SS TRAINING ROOM A SS TRAINING ROOM B
2200
5
1426 1428
2200
LOREM ROOM
6
ADULT HEALTH CLINIC / CLÍNICA DE SALUD DE LOS ADULTOS
SECOND FLOOR / SEGUNDO PLANTA
2200
LOREM ROOM
7
IMMUNIZATION CLINIC / CLÍNICA DE VACUNACIÓN
27
2200
LOREM ROOM
SECOND FLOOR / SEGUNDO PLANTA
28
WORK FIRST & COMMUNITY INITIATIVES LOBBY / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS RECEPCION ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS
21
DENTAL CLINIC
22
WOMEN’S CLINIC / CLÍNICA DE LA MUJER
SS CONFERENCE A SS CONFERENCE B SS CONFERENCE C SS CONFERENCE D SS CONFERENCE E SS CONFERENCE F SS TRAINING ROOM C
23
NUTRITION CLINIC / NUTRICIÓN CLÍNICA
24
OBSTETRICIAN ORIENTATION ROOM / OBSTETRA ORIENTACIÓN HABITACIONES
2420 2421 2422 2423 2424 2425 2301
25
ENVIRONMENTAL HEALTH LOBBY / SALUD AMBIENTAL LOBBY
THIRD FLOOR / TERCER PLANTA
County Wide Meeting TIME 8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
MEETING - 10:00 AM - 8:30 AM - 11:00 AM - 12:00 PM - 12:30 AM - 2:30 PM - 3:00 PM - 3:00 PM - 4:30 PM - 4:00 PM - 4:30 PM - 5:45 PM
Durham Ope Meeting Tod
COVER PROFILES SLIDE-OUT TO RIGHT AFTER END CAP IS REMOVED.
THIRD FLOOR / TERCER PLANTA
32
JOB WELFARE LOBBY / RECEPCION DE TRABAJO DE BIENESTAR
31
VITAL RECORDS LOBBY / VITAL REGISTRO LOBBY
34
CHILD WELFARE LOBBY
33
PUBLIC HEALTH ADMINISTRATIVE LOBBY / SALUD PÚBLICA DE ADMINISTRACIÓN LOBBY
3#
SOCIAL SERVICES ADMINISTRATIVE LOBBY / SERVICIOS SOCIALES DE ADMINISTRACIÓN LOBBY
/ RECEPCION DE BIENESTAR DEL NIÑO
1
3.28”
THIRD FLOOR / TERCER PLANTA
32
JOB WELFARE LOBBY / RECEPCION DE TRABAJO DE BIENESTAR
34
CHILD WELFARE LOBBY
3#
SOCIAL SERVICES ADMINISTRATIVE LOBBY / SERVICIOS SOCIALES DE ADMINISTRACIÓN LOBBY
CIÓN LOBBY
3.28”
48
standard anodized finish profile with laser engraved/ routed lettering and paint fill, typ.
/ RECEPCION DE BIENESTAR DEL NIÑO
3.28” 3.28”
60
t-bar standard anodized finish endcap with security locking device, typ. both ends
38.875”
1
D1-01 - SOCIAL SERVICES PARTIAL ELEV: SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
2
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
D1-01 - PUBLIC HEALTH ELEV: SIGN VISUAL SCALE: 3/4” = 1’-0” REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat W Condimentum Commodo Ornare Sed Vitae Sit Vesti Vestibulum interd Evening Session Lorem Ipsum Sed Interdum magna s
County Wide Meeting 3:00 - 4:00 PM
County Wide Meeting Room A 3:00 - D1-23 4:00 PM D1-24
3
/ CLÍNICA DENTAL
A B A B C A A 120 B A C B A
Please check-in at The Duraham Center Lobby
SOCIAL SERVICES DEPARTMENT D1-25 T13 P10 / DEPARTAMENTO DE SERVICIOS SOCIALES
10
ROOM
Durham Open Trails Meeting Today
T12 P10
8
PUBLIC HEALTH REGISTRATION / CONTROL DE SALUD PÚBLICA
- 10:00 AM - 8:30 AM - 11:00 AM - 12:00 PM - 12:30 AM - 2:30 PM - 3:00 PM 60 - 3:00 PM - 4:30 PM - 4:00 PM - 4:30 PM - 5:45 PM ROOM
Meeting
BUILDING DIRECTORY CONTENT LAYOUT Breakfast Session
MEETING
Breakfast Session Lorem Ipsum Sed Novum Illie Dolor Sit Amet Vestibulum Erat Wisi Amet Wisi Condimentum Commodo Ornare Sed Vitae Sit Vestibulum Vestibulum interdum magna quam Evening Session Lorem Ipsum Sed Interdum magna sed
1
PUBLIC HEALTH CHECK-OUT / DE SALUD PÚBLICA DE REGISTRO
8
8:00 AM 8:30 AM 10:00 AM 10:00 PM 10:30 AM 12:30 PM 2:00 PM 2:00 PM 2:30 PM 3:00 PM 3:30 PM 3:45 PM
FIRST FLOOR / PRIMER PLANTA
1 THE DURHAM CENTER W.I.C. CLINIC / W.I.C. CLÍNICA 2 MANAGING BEHAVIORAL HEALTH & DISABILITY SERVICES
1.625”
11
28
48
MEETING
MANAGING BEHAVIORALPUBLIC HEALTH & DISABILITY HEALTH DEPARTMENTSERVICES
1.625”
FOOD AND NUTRITION SERVICES LOBBY / ALIMENTACIÓN Y NUTRICIÓN RECEPCION DE SERVICIOS
2420 2421 2422 2423 2424 2425 2301
36
THE DURHAM CENTER
1.625” LOREM ROOM
WORK FIRST & COMMUNITY INITIATIVES LOBBY / PRIMER TRABAJO E INICIATIVAS COMUNITARIAS RECEPCION 33.8125” ADULT AND CRISIS SERVICES LOBBY / DE ADULTOS Y SERVICIOS DE RECEPCION DE CRISIS
24
P6
TIME
LOREM ROOM
SECOND FLOOR / SEGUNDO PLANTA
16
Public Health
10
27
8
T4
1.75”
FIRST FLOOR / PRIMER PLANTA
TIME
THE DURHAM CENTER Please check-in at The Duraham Center Lobby T5 SERVICES P6 MANAGING BEHAVIORAL HEALTH & DISABILITY
2200 LOREM ROOM 1.25” SOCIAL SERVICES DEPARTMENT 1” 5.1875” 1.25” / DEPARTAMENTO DE SERVICIOS SOCIALES 2200 LOREM ROOM
CRISIS
D1 County Wide Meeting Roms
P13
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 76
D2-1 16”
D2
D2-2
BUILDING DEDICATION SIGN D2-3 D2-2 D2-3
blocking, by others
4B SG78 #
d2-2 72”
D2-5 d2-5
facility wall d2-1
D2-4
DURHAM COUNTY HUMAN SERVICES
DURHAM COUNTY HUMAN SERVICES
D2-1
February 2011
February 2011
D2-3
City of Durham
City of Durham
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Lorem Ipsum Name Sed Noumne
Lorem Ipsum Name Sed Noumne
Lorem Ipsum Name Sed Noumne Lorem Ipsum Name Sed Noumne
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Lorem Ipsum Name Sed Noumne Lorem Ipsum Name Sed Noumne Lorem Ipsum Name Sed Noumne Lorem Ipsum Name Sed Noumne
INSTALLATION DETAIL SCALE: 6”=1’-0”
2
Lorem Ipsum Name Sed Noumne
Title Here
Lorem Ipsum Name Sed Noumne
d2-3
Lorem Ipsum Name Sed Noumne
Title Here
Lorem Ipsum Name Sed Noumne
1/2”
D2-5
Lorem Ipsum Name Sed Noumne
Title Here
Lorem Ipsum Name Sed Noumne
3
d2-4
Lorem Ipsum Name Sed Noumne
Title Here
Lorem Ipsum Name Sed Noumne
D2-2
sharp bend 90° CORNERS softened close to 1/32” radius
SG78
Lorem Ipsum Name Sed Noumne Lorem Ipsum Name Sed Noumne
D2-1
d2-1
Min. 1/16” bent anodized aluminum bracket with two elongated holes on vertical face for fastening to wall and a single hole in bottom bend to coordinate with flange on backside of “A” sign. The top portion is bent or welded assembly to connect to top of “A” sign.
d2-2
Phillips black oxide or other coated screw to fasten sign bracket to wall.
d2-3
Anodized aluminum flange. Single piece cut from aluminum stock, pretapped to receive A1-8 screw, and permanently adhered to backside of “A” sign.
d2-4
1/8” painted aluminum pan sign with 3/4” returns on all sides. A 1/8” thick anodized alum. band occurs flush to top side of sign on back to provide hang connection to top of A1-1 bracket. All visible sign corners to be smooth and square. Slightly soften edge to within a 1/32” radius. Content and lettering are laser-engraved /routed with paint fill.
d2-5
Socket cap screw with hex or star drive drive. Finish is black oxide or other approved coated finish.
Lorem Ipsum Name Sed Noumne Lorem Ipsum Name Sed Noumne
D2-2
Lorem Ipsum Name Sed Noumne
D2-3
Lorem Ipsum Name Sed Noumne Lorem Ipsum Name Sed Noumne
D2-5
Lorem Ipsum Name Sed Noumne
#4 SG78
1
ELEV: SIGN VISUAL SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
2
EXPLODED AXON - REFERENCE SCALE: NTS DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 77
2”
5 3/8”
T.O. SIGN 6’-8”
d2-1
elevation is measured from t.o.f.f.
D2 BUILDING DEDICATION SIGN 3/4”
4” sharp bend 90° CORNERS softened close to 1/32” radius
5 3/8” 4B SAME
ROUTED LETTERING WITH PAINT FILL
16 1/2” P6
Z8
#
20” # 4A SAME
ROUTED 72 LETTERING WITH PAINT FILL
P6
T14
P5
36”
d2-1
LINE INDICATES EDGE OF SIGN BEHIND
ROUTED LETTERING WITH PAINT FILL 60 ROUTED LETTERING WITH PAINT FILL ROUTED LETTERING WITH PAINT FILL
P6
P6 P6
T6
T39 T39
DURHAM COUNTY HUMAN SERVICES February 2011
1 1/2”
d2-4 d2-1
11”
4B
3 1/2”
2.1825” TYP.
#
4”
1
ELEV: SIGN FRONT WITH BRACKETS SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
Lorem Ipsum Name Sed Noumne
d2-3
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
Title Here
close to Title Here ened 1/32” radius
Lorem Ipsum d2-1 Name Sed Noumne
Lorem Ipsum Name Sed Noumne
Lorem Ipsum Name Sed Noumne
Lorem Ipsum Name Sed Noumne sharp bend 90° CORNERS soft-
Lorem Ipsum Name Sed Noumne
2
Lorem Ipsum Name Sed Noumne
4
ELEV.: GRIDS & LAYOUT
SECTION Title Here SCALE: 6”=1’-0”
SCALE: 3” = 1’-0” Title Here Lorem Ipsum Name Sed Noumne DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR Lorem Ipsum MORRISTOWN - NJ 07960 T: 973 270 0233 Name Sed Noumne W: design-made.com
Title Here
Title Here
d2-4
Lorem Ipsum Name Sed Noumne
Lorem Ipsum Name Sed Noumne
48
20”
#4 SAME
d2-4
Title Here
Lorem Ipsum Name Sed Noumne
3 SG77
February 2011 City of4A Durham
Lorem Ipsum Name Sed Noumne
d2-1
d2-3
intermediate support
City of Durham
Lorem Ipsum Name Sed Noumne
DURHAM COUNTY HUMAN SERVICES
Lorem Ipsum Name Sed Noumne DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS:
08/13/2010 Title Here- FOR PROCUREMENT
06/25/2010 - FOR FINAL REVIEW Lorem Ipsum 05/28/2010 - FOR COORD. UPDATE Name Sed Noumne 05/03/2010 - FOR COORDINATION
Title Here
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 78
F1
# 3 SAME
2 1/8”
4 1/4”
eq. TBD
6”
eq. 3”
F1-1
T30
coordinate layout so seam occurs between words and not behind a letter
M2
DIMENSIONAL S.S. LETTERS LINE INDICATES TILE SEAM OF BLDG. WALL
DURHAM COUNTY HUMAN SERVICES ALIGN
SECURITY / SEGURIDAD F1-1
T25
F1-1
M2
INFORMATION / INFORMACIÓN T27
F1-1
M2
T25
F1-1
M2
T27
M2
LINE INDICATES TILE SEAM OF BLDG. WALL
1
ELEVATION: GRIDS & LAYOUT SCALE: 1 1/2” = 1’-0”
1/4”
1”
F1-1
M2
DURHAM COUNTY HUMAN SERVICES
F1-2
SECURITY / SEGURIDAD
INFORMATION / INFORMACIÓN
F1-1
Stainless steel fabricated dimensional letter. Finish shall be satin #6.
F1-2
Stainless steel pin rod support welded to each letter. Fabricator to determine number of supports per letter and exact location. Letters shall be attached to stone safely and securely attached by means of metal anchors, bolts or expansions screws of not less than 3/8” diameter and shall be embedded at least 2 inches.
TBD
epoxy anchor
BLDG. GRANITE TILE SURFACE
2
NOT USED SCALE:
3
4
SECTION: SCALE: 6” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ELEVATION: MOUNTING HEIGHTS SCALE: 1/4”=1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 79
ST
114
84
G1 APPLIED VINYL MOUNTED TO GLASS (SECOND SURFACE)
DURHAM COUNTY HUMAN SERVICES 108
5
2
SAME
SAME
72
5”
1”
96
5” HOURS OF OPERATION
NO HANDGUNS ON PREMISES
MONDAY TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY SUNDAY
/ NO HAY ARMAS DE FUEGO EN LOS LOCALES DE
57 1/2”
60
V1
1
WEST
EAST
ELEVATION: SIGN VISUAL SCALE: 1/2” = 1’-0”
2
location IF THIRD INFORMATIONAL PICTOGRAM OCCURS
TYP. FOR ALL ARTWORK
TO TOP OF FINISHED FLOOR
84
EAST ELEVATION: GRID & LAYOUT
TYP. FOR ARTWORK AND LETTERING
48
SCALE: 1 1/2” = 1’-0”
DURHAM
V1
47”
72
2”
23”
Z13 5”
22”
1” 36
5”
AFF ENTRY ONLY
STAFF ENTRY ONLY
STAFF ENTRY ONLY
STAFF ENTRY ONLY
STAFF ENTRY ONLY
L PERSONAL SÓLO PUEDE TRAR EN
/ EL PERSONAL SÓLO PUEDE ENTRAR EN
/ EL PERSONAL SÓLO PUEDE ENTRAR EN
/ EL PERSONAL SÓLO PUEDE ENTRAR EN
/ EL PERSONAL SÓLO PUEDE ENTRAR EN
57 1/2”
ELEVATION: SIGN VISUAL SCALE: 1/2” = 1’-0”
4
ELEVATION: SIGN VISUAL 48
NO HANDGUNS ON PREMISES HOURS OF OPERATION
NO HANDGUNS ON PREMISES
/ NO/HAY EL PERSONAL ARMAS DE SÓLO FUEGO PUEDE EN LOS LOCALES ENTRAR DE EN
/ NO HAY ARMAS DE MONDAY FUEGO EN LOS LOCALES DE TUESDAY WEDNESDAY THURSDAY FRIDAY SATURDAY SUNDAY
/ NO HAY ARMAS DE FUEGO EN LOS LOCALES DE
MONDAY / LUNES: TUESDAY / MARTES: WEDNESDAY /MIÉRCOLES: 24 THURSDAY / JUEVES: FRIDAY / VIERNES: SATURDAY / SÁBADO: SUNDAY / DOMINGO:
T9
57 1/2”
T8
3
NO HANDGUNS STAFF ENTRY ONONLY PREMISES
HOURS OF OPERATION
60
57 1/2”
STAFF ENTRY ONLY / EL PERSONAL SÓLO PUEDE ENTRAR EN
SCALE: 1/2” = 1’-0”
TO TOP OF FINISHED FLOOR
NO HANDGUNS ON PREMISES 9AM - 5PM 9AM - 5PM 9AM - 5PM 9AM - 5PM 9AM - 5PM CLOSED CLOSED
/ NO HAY ARMAS DE FUEGO EN LOS LOCALES DE
1/2” 12
5
ELEVATION: GRID & LAYOUT SCALE: 11/2” = 1’-0”
36 THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE 0
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 80
LCD1
1 SG83
LINES INDICATE SEAM BREAK IN PANEL. PANEL SEAMS TO BE BUTT TIGHT AND FLUSH.
# 3 SG86
MARK INDICATES LOCATION OF POWER AND DATA PULLS. CENTER ON NICHE AND LOCATE AT TOP. LCD-8 M3
LCD-7 LCD-1
LCD-2
LCD-5
LCD-6 ALIGN
8’-0” T.O.F. NICHE
7’-11” T.O. BOX (R.O.)
COORDINATE WITH WALL REVEAL LINE
B.O. SUPPORT 7’-6 1/2”
LCD-5 25 1/2”
LCD-5
LCD-5
32”
5’-5” B.O. BOX (R.O.)
5’-4” B.O.F. NICHE LCD-3
64”
LINES INDICATE DATA RUNS TO MONITORS
64”
LCD-4
LCD-8 LCD-3
0’-0” T.O.F.F.
0’-0” T.O.F.F.
1
EXPLODED SECTION
2
SCALE: 1/2” = 1’-0”
LCD-8
SCALE: 1/2” = 1’-0”
Flat head cap screw countersunk and set flush. See elevation for recommended screw pattern. Signage manufacturer and installer to determine final screw placement.
LCD-5
Samsung 460UX 46” LCD monitor with minimal bezel with built-in video wall processor.
LCD-6
0.118” colorless Anti-Reflective acrylic sheet by Acrylite® or approved equal cut to size. Acrylic face shall be routed to have face set flush to aluminum face panel (LCD-6). Cut opening for monitor 1/8” inward from inside edge of monitor bezel. Acrylic to be set within 3/8” of monitor face.
LCD-7
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ELEVATION LCD MEDIA ARRAY - SIGN 2244
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
Blackened steel pan face with 3/4” return - return faces outward to conceal edge of surrounding gyp. bd. Blackened steel with water based clear satin lacquer. DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
LCD-1
Niche provided by others. Signage Fabricator to verify actual field conditions and coordinate with Architect and building Contratcor.
LCD-2
Aluminum or steel monitor box. Box is to be engineered to contain LCD monitor and be removable for repair or replacement of monitor. The box and monitor are to be removed as a single unit.
LCD-3
Knurled thumb screw fasteners.
LCD-4
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 81
LCD2, LCD3
# 4 SG86
2
1
SG83
SG83
# 3 SG86
MARK INDICATES LOCATION OF POWER AND DATA PULLS. CENTER ON NICHE AND LOCATE AT TOP.
8’-0” T.O.F. NICHE COORDINATE WITH WALL REVEAL LINE
LCD-1 LCD-2
LCD-5
“A3” SIGN
5’-4” B.O.F. NICHE 5’-4” B.O.F. NICHE
5’-3” T.O. BOX (R.O.) 14”
LCD-8
64” A5 ROOM SIGN
16”
4’-0” B.O.F. NICHE
LCD-4
LCD-5
LCD-9 LCD-7
4’-1” B.O. BOX (R.O.)
LCD-5
32”
LCD-3
MARK INDICATES LOCATION OF POWER AND DATA PULLS. LOCATE AT TOP OFFSET FROM CENTER.
48”
LCD-6
LINES INDICATE DATA RUNS TO MONITORS
49”
0’-0” T.O.F.F.
1
EXPLODED SECTION LCD3 SCALE: 1/2” = 1’-0”
2
ELEVATION LCD3
3
SCALE: 1/2” = 1’-0”
LCD-8
LCD-9
SCALE: 1/2” = 1’-0”
Flat head cap screw countersunk and set flush. See elevation for recommended screw pattern. Signage manufacturer and installer to determine final screw placement.
LCD-5
Samsung 460UX 46” LCD monitor with minimal bezel with built-in video wall processor.
LCD-6
0.118” colorless Anti-Reflective acrylic sheet by Acrylite® or approved equal cut to size. Acrylic face shall be routed to have face set flush to aluminum face panel (LCD-6). Cut opening for monitor 1/8” inward from inside edge of monitor bezel. Acrylic to be set within 3/8” of monitor face.
LCD-7
Blackened steel pan face with 3/4” return - return faces outward to conceal edge of surrounding gyp. bd. Blackened steel with water based clear satin lacquer.
Samsung 19” High Performance LCD Monitor (B1940R)
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ELEVATION LCD2 - SIGN 2254
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
LCD-1
Niche provided by others. Signage Fabricator to verify actual field conditions and coordinate with Architect and building Contratcor.
LCD-2
Aluminum or steel monitor box. Box is to be engineered to contain LCD monitor and be removable for repair or replacement of monitor. The box and monitor are to be removed as a single unit.
LCD-3
Knurled thumb screw fasteners.
LCD-4
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 82
LCD1, LCD2, LCD3 lines indicate edge of monitor box (LCD-2) behind LCD-8 LCD-3
+/- 7”
a3 sign
LCD-8 LCD-3
EQ.
lines indicate edge of monitor box (LCD-3) behind LCD-7 LCD-3
EQ. +/- 14”
fastener for face panel (lcd-7) to monitor box
LCD-8 LCD-6
+/- 3”
LCD-9
building reveal LCD-3 LCD-8 LCD-5 LCD-7
LINES INDICATE SEAM BREAK IN PANEL. PANEL SEAMS TO BE ABUTTED TIGHT AND FLUSH.
LCD-6
1
ENLARGED ELEV: LCD1/ LCD2
2
SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
ENLARGED ELEV: LCD3 SCALE: 1 1/2” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 83
SIGN SECTIONS GYP. BD. WALL SURFACE (BLDG.) SEE ARCH. PARTITION TYPES FOR WALL ASSEMBLY(S) 2 1/4”
A1-2
A1-4 A1-1 blocking by others A1-3 2 1/4” GYP. BD. WALL SURFACE (BLDG.) SEE ARCH. PARTITION TYPES FOR WALL ASSEMBLY(S)
A1-7 1” TYP.
A1-2 3” A8-2
A1-4 A1-1
A8-1
blocking by others A1-3 GYP. BD. WALL SURFACE (BLDG.) SEE ARCH. PARTITION TYPES FOR WALL ASSEMBLY(S) 2 1/4”
AG-2
blocking by others
A1-7
GLASS STOREFRONT (BLDG.)
1” TYP.
INDUSTRIAL STRENGTH 3M ADHESIVE, SEE SPEC
A1-2
A8-1
A8-4
A1-2 A8-2
AG-6 A1-4
A1-4
AG-3
A1-3 2 1/4”
A8-2
A1-1
A1-1
blocking by others A1-3 3”
INDUSTRIAL STRENGTH 3M ADHESIVE, SEE SPEC
BLOCKING BY OTHERS
A8-1 A8-1
A1-7
A1-7
1
SECTION DETAIL A1, A2, A3, A7 - WALL MOUNT SCALE: 3” = 1’-0”
2
SECTION DETAIL A1G, A2G, A3G - GLASS MOUNT SCALE: 3” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
3
SECTION DETAIL A4,A5,A6 - WALL MOUNT SCALE: 3” = 1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
4
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
SECTION DETAIL A8 - WALL MOUNT SCALE: 3” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 84
4# SAME
# 3 SAME
GYP. BD. WALL SURFACE (BLDG.) SEE ARCH. PARTITION TYPES FOR WALL ASSEMBLY(S)
ELEV.: SIGN A11 REFERENCE FOR SECTIONS THIS PAGE SCALE: NTS
PROJECTION OF SIGN EBYOND
2” AG-6 GLASS STOREFRONT (BLDG.) INDUSTRIAL STRENGTH 3M ADHESIVE, SEE SPEC
A11-2
AG-6 A9-7
2 1/4” A11-2
A9-7
AG-4 INDUSTRIAL STRENGTH 3M ADHESIVE, SEE SPEC
GYP. BD. WALL SURFACE (BLDG.) SEE ARCH. PARTITION TYPES FOR WALL ASSEMBLY(S)
GYP. BD. WALL SURFACE (BLDG.) SEE ARCH. PARTITION TYPES FOR WALL ASSEMBLY(S)
A9-2
2”
A9-6
A11-4
A11-4 BEYOND
A11-1
A11-7
A11-3
A11-5
blocking by others
A9-1
blocking by others
2 1/4”
blocking by others INDUSTRIAL STRENGTH 3M ADHESIVE, SEE SPEC
1
SECTION DETAIL A8 - GLASS MOUNT SCALE: 3” = 1’-0”
ALUM. DIMPLE TO SET SIGN FLUSH WITH OFFSET FROM BRACKET
A11-8
2
SECTION DETAIL A9,A10 - WALL MOUNT SCALE: 3” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
3
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
SECTION DETAIL A11 SCALE: 3” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
4
SECTION DETAIL A11 SCALE: 3” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 85
INSTALLATION SIGN SECTIONS GYP. BD. WALL SURFACE, (BLDG.) REVEAL (BLDG.) FASTENER FOR FACE PANEL, PTD. TO MATCH DBL LAYER OF GYP. BD. WALL SURFACE (BLDG.) SEE ARCH. PARTITION TYPES
CONDUIT FOR MONITOR DATA CABLES
reveal BY OTHERS
GYP. BD. WALL SURFACE (BLDG.)
LCD-8 A1-2 A1-4 64”
8”
LCD-6
“A” TYPE SIGN “A” TYPE SIGN see section #1 sht. sg84
A1-1
ROUGH OPENING SUPPORT (BLDG.) SIGN A3 LCD-4
A1-3
CONDUIT FOR MONITOR DATA CABLES
niche in wall by others to receive a13 sign
niche in wall by others to receive a12 sign
ROUGH OPENING SUPPORTS FOR MONITOR BOX (BLDG.)
A1-7 A12-2
A12-2
A12-1
A12-1
A12-3
A12-3
A12-4
A12-4
EDGE OF ALUM. FRAME BEYOND
LCD-6
LCD-2
LCD-2
LCD-5
LCD-5
LCD-7
LCD-7
EDGE OF ALUM. FRAME BEYOND
23” LCD-4 BRACKET FIXED TO MONITOR BOX, COORDINATE TO MONITOR HANGING SUPPORT
A12-1
A12-1
A12-2
A12-2
LCD-4
reveal BY OTHERS
ROUGH OPENING SUPPORTS FOR MONITOR BOX (BLDG.)
ROUGH OPENING SUPPORT (BLDG.) LCD-8
to t.o.f..f
1
SECTION DETAIL A12 - WALL MOUNT SCALE: 3” = 1’-0”
2
3
SECTION DETAIL A13 - WALL MOUNT SCALE: 3” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
SECTION DETAIL LCD 1, LCD 2 SCALE: 3” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
4
SECTION DETAIL LCD 3 SCALE: 3” = 1’-0” REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 86
INSTALLATION SIGN SECTIONS
C1-1 C1-2 C3-_ C3-_ FIN. CLG. ALIGN
C1-4 C1-3
C4-3
C3-_
INTERNAL FRAME
INTERNAL FRAME
C3-_ C4-2
C3-_
C1-3
C4-6/7 C4-4
C4-_
FACE
C1-3
FACE
NOTE TO ARCHITECT: HAVE CONTRACTOR PROVIDE AND INSTALL UNISTRUT WITH WELDED NUT AND TEMPORARY ROD EXTENDED THROUGH FINISHED CEILING.
1 1/2” BLDG. column
BLDG. STONE TILE
C1-8 C1-9
C4-6/7 C4-2
ALIGN
C4-3
INTERNAL FRAME
C4-4
FACE
C4-1
1
SECTION DETAIL C4 - WALL MOUNT - TO STONE SCALE: 1 1/2” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
2
3
SECTION DETAIL C3 - WALL MOUNT - TO COLUMN SCALE: 1 1/2” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
SECTION DETAIL C1,C2 SCALE: 3” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 87
SCALE = 1/4”=1’-0” MOUNTING HEIGHT ELEVATIONS GENERAL
SCALE = 1/4”=1’-0”
EDGE OF DOOR JAMB, TYP.
8”
8”
4”
ALIGN
4”
4”
CL
8”
SCALE: 1/4” = 1’-0”
DIM. TO OUTSIDE EDGE OF FRAME
60”
64”
64”
64”
64”
64”
64”
A1 A1
1
SIGN A1 WALL MOUNT - PH
2
3
SIGN A1 GLASS MOUNT - PH/SS
SIGN A1 WALL MOUNT - SS
SIGN A2 A2 WALL MOUNT - PH
4
5
6
SIGN A2 GLASS MOUNT - PH/SS
SIGN A2 WALL MOUNT - CW
4” ALIGN
ALIGN TO EDGE OF WALL
A3 LCD3
64”
64” 64” WALL BEYOND
7
SIGN A3 A3 WALL MOUNT - PH/SS
8
SIGN A3 - LCD3 A3 LCD WALL + MOUNT - CW
A4
9
N
SIGN A4 - FLOOR DIRECTORY WALL MOUNT - PH/SS (ELEVATOR CORRIDOR)
A5
A4
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 88
MOUNTING HEIGHT ELEVATIONS GENERAL
SCALE = 1/4”=1’-0”
SCALE: 1/4” = 1’-0”
ALIGN TO EDGE OF WALL
ALIGN
ALIGN
ALIGN
ALIGN 1” TYP. 1” TYP.
64”
A3
64”
A3 + LCD A1
64”
N A4
A5 A5 SIGN WALL MOUNT - PH
A5
STOREFRONT & DOORS RECESSED
1
2
SIGN A5 WALL MOUNT - SS
A2
3
SIGN A5 - SERIES WALL MOUNT INSTALLATION NOTE: INSTALL TOP SIGN FIRST AND CONTINUE DOWNWARD
DIM. IS TO OUTSIDE OF EDGE OF FRAME 4”
ALIGN
8”
ALIGN
ALIGN
64”
A6 A4
4
SIGN A6 WALL MOUNT - SS
A7
A9
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
93”
ALIGN
93”
64”
5
SIGN A7 WALL MOUNT - PH/SS/ CW
A10
DESIGN MADE
4”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
A8
6
A5
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
SIGN A8 WALL MOUNT - PH/SS
7
SIGN A8 GLASS MOUNT - PH/SS
A11
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 89
A
SCALE = 1/4”=1’-0”
MOUNTING HEIGHT ELEVATIONS GENERAL
ALIGN BOTTOM AND RIGHT SIGN EDGES TO EDGES OF REVEALS
SCALE: 1/4” = 1’-0”
3 SAME
ALIGN
ALIGN
ALIGN
ALIGN ALIGN
96”
96”
PROJECTING EDGE OF SIGN
TOP EDGE OF WALL OPENING (PH)
ALIGN
A6 A6 A6 A1A9
1
2 SIGN A10 A10 WALL MOUNT - SS
SIGN A9 WALL MOUNT - PH
REVEAL(BLDG.)
SIGN A9/A10 A11 DETAIL
A2
A12
3
SCALE: 1 1/2” = 1’-0”
NOTE: FOR SIGN A10, ORIENTATION IS OPPOSITE ABOUT THE VERTICAL AXIS
ALIGN TOP OF A12 TO BOTTOM OF SIGN ABOVE
ALIGN TO EDGE OF REVEAL SIGN A6
SIGN A5
1/2”
ALIGN
ALIGN
64”
64”
64”
A10 A10 A10
SIGN A11 A114A11 A11 WALL MOUNT - SS
SIGN A12 A12 A12 A12 WALL MOUNT - SS
6
A13 A13 A13
SIGN A13 WALL MOUNT - PH
A5
A4
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
5
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 90
SCALE = 1/4”=1’-0”
SCALE = 1/4”=1’-0” MOUNTING HEIGHT ELEVATIONS GENERAL DIM. TO OUTSIDE EDGE OF FRAME
EDGE OF DOOR JAMB, TYP.
IF SECOND SIGN OCCURS, PLACE HERE
IF SECOND SIGN OCCURS, PLACE HERE
IF SECOND SIGN OCCURS, PLACE HERE
8”
8”
8”
60”
64”
64”
B1/ B2/ B4 B1/ B2/ B4 1
8”
CL
CL
8”
SCALE: 1/4” = 1’-0”
2
SIGN B1/ B2/ B4 WALL MOUNT
60”
64”
B1/ B2/ B4 3
SIGN B1/ B2/ B4 GLASS MOUNT
B6
8”
CL
EDGE OF DOOR JAMB, TYP.
CL
SCALE = 1/4”=1’-0”
60”
62”
60”
62”
B3
N
B3
4
SIGN B1/ B2/ B4 DOUBLE DOOR WALL MOUNT
SIGN B3 WALL MOUNT
5
B3
B3 6
SIGN B3 GLASSS MOUNT
62”
SIGN B3 DOUBLE DOOR WALL MOUNT
8” 96”
CL
CL
96”
60”
7
B6
64”
B6 N
SIGN B5 GLASS MOUNT
N
60”
8
SIGN B6 FLAT MOUNT
9
B6
SIGN B6 PROJECTING MOUNT
SIGN B9 B8 B9N 9 B7 WALL MOUNT
B6 SIGN SHOULD BE INSTALLED SO THAT FACE IS PERPENDICULAR TO PRIMARY PATH OF TRAVEL/ APPROACH, I.E. FROM MAIN ENTRY
N
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
B7
B8
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
N
11 SIGN B8 WALL MOUNT DOUBLE ELEVATOR
B7
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
N B7
B812
SIGN B8 WALL MOUNT SINGLE ELEVATOR
B8
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 91
MOUNTING LAYOUT ELEVATIONS SPECIFIC - REFERENCE SHEET BATHROOM WALL
7
PUBLIC HEALTH CORRIDOR
SCALE: 1/8” = 1’-0”
ELEVATOR
6
ELEVATION: ELEVATOR LOBBY - QUADRANT A
4
5
SG94
SG90
ELEVATOR
HALLWAY
SCALE: 1/8” = 1’-0”
SCALE: NTS
ELEVATOR
5
ELEVATION: NAME
ELEVATOR
4
ELEVATION: NAME SCALE: 1/8” = 1’-0”
ELEVATION: NAME SCALE: 1/8” = 1’-0”
3
2
ELEVATION: NAME SCALE: 1/8” = 1’-0”
6
7
SG94
SG94
ELEVATION: NAME SCALE: 1/8” = 1’-0”
3 SG94 1
5
4
5
SG94
SG94
SG90
13
ELEVATION: PUBLIC HEALTH CORRIDOR SCALE: 1/8” = 1’-0”
1
INTERIOR ELEVATION: PUBLIC HEALTH EAST WALL
1
8
SG95
SG94
INTERIOR ELEVATIONS SIGN MOUNTING COND SCALE: 1/8” = 1’-0”
DESIGN MADE
ELEVATION: COUNTY WIDE SHARED CORRIDOR SCALE: 1/8” = 1’-0”
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
DATE: ISSUED
REVISIONS: -
SG
4 SG96
12
ELEVATION: SOCIAL SERVICES CORRIDOR SCALE: 1/8” = 1’-0”
2
1
SG96
SG96
3
INTERIOR ELEVATION: SOCIAL SERVICES NORTH WALL ELEVATOR
11
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DESIGN MADE
NOT USED
7 WASHINGTON STREET SCALE: 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
10
9
ELEVATION SCALE: 1/8” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
ELEVATION: NAME
REVISIONS: SCALE: 1/8” = 1’-0” 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
8
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 92
ELEVATIO BATHROO
SCALE: 1/
MOUNTING LAYOUT ELEVATIONS SPECIFIC - REFERENCE SHEET SCALE: NTS
13
1
2
3
3
SG97
SG97
SG97
SG97
ELEVATION: COUNTY WIDE SHARED CORRIDOR SCALE: 1/8” = 1’-0”
12
4
5
SG97
SG97
1
INTERIOR ELEVATION: COUNTY WIDE/ SS CORRDIOR SOUTH WALL
6
7
5
SG97
SG97
SG97
ELEVATION: SOCIAL SERVICES CORRIDOR SCALE: 1/8” = 1’-0”
ELEVATOR
11
10
NOT USED SCALE:
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
BATHROOM WALL
PUBLIC HEALTH CORRIDOR
ELEVATOR
ELEVATOR
HALLWAY
9
ELEVATION SCALE: 1/8” = 1’-0”
DESIGN MADE
ELEVATOR
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
8
ELEVATION: NAME SCALE: 1/8” = 1’-0”
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
ELEVATOR
ELEVATION: BATHROOM ENTRY WALL SCALE: 1/8” = 1’-0”
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 93
NAME NAME
ELEVATOR LOBBY - QUADRANT A
NAME NAME
SCALE:SCALE: 1/8” = 1’-0” 1/8” = 1’-0” SCALE: 1/8” = 1’-0”
SCALE:SCALE: 1/8” = 1’ 1/
MOUNTING LAYOUT ELEVATIONS SPECIFIC PUBLIC HEALTH WING
A8
A8
A2 A2
A2 A2
A4 A4 A4
64”
1
9
ELEVATION: NAME
DOOR 1120A SIGN 1012 SIGN 1011 SIGN 1010
2
ALIGN
SCALE: 1/4” = 1’-0”
DOOR 1125A SIGN 1015 SIGN 1014 SIGN 1013
3
6
ELEVATOR LOBBY - QUADRANT A ELEVATOR
B8
NOTE: ELEVATOR CONDITION IS SAME FOR EACH FLOOR.
ELEVATION: NAME
SCALE: 1/8” = 1’-0”
4
8
A1 A1
A5 A5
A1
A5
NOTE: WAYFINDING - HALLWAY CONDITION IS SIMILAR QUADRANT A FOR EACH FLOOR.
ELEVATION: BATHROOM ENTRY WALL SCALE: 1/8” = 1’-0”
SCALE: 1/8” = 1’-0” C4 C4
A9
A9
8’-0” A4
5
SECOND FLOOR BRIDGEWAY SIGNS 2297- 2300
A1
A5
A1
A5
A1
A5
6
SIGN 2029/ 2030 SIGN 2031/ 2032
A2
A5
A2
A4
A5 (4’ LENGTH)
A3 A1
A1 A4
SIGN 2034 SIGN 2033
DOOR 2180A SIGN 2035
7
DOOR 2190A
NOTE: CONDITION IS SIMILAR FOR THIRD FLOOR: SIGN 3155/ 3156
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
8
ELEVATOR LOBBY - QUADRANT B
NOTE: CONDITION IS SIMILAR FOR EACH FLOOR. THIRD FLOOR HAS LESS SIGNS.
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
2
ELEVATION: NAME
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 94
MOUNTING LAYOUT ELEVATIONS SPECIFIC PUBLIC HEALTH WING / BASEMENT
LINE INDICATES ALTERNATE POSITION , TBD ON FURTHER REVIEW
SCALE: 1/4” = 1’-0”
A9
A5
1
A2
DOOR 1170 SIGN 1037 SIGN 1036 / SIGN 1038
INTERIOR ELEVAT SIGN MOUNTING SCALE: 1/8” = 1’-0” DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: -
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 95
MOUNTING LAYOUT ELEVATIONS SPECIFIC SOCIAL SERVICES WING SCALE: 1/4” = 1’-0”
A10
A10
ELEVATOR
ELEVATION
A1
A1 A5
A2
A2
9
ELEVATION: A11 NAME
A5
SCALE: 1/8” = 1’-0”
1
DOOR 1410A SIGN 1341 SIGN 1339/ 1340
DOOR 1413A SIGN 1342
2
DOOR 1420 SIGN 1337 SIGN 1335/ 1336
3
DOOR 1426 SIGN 1331/ 1332
4
ALIGN
A5
SCALE: 1/8” = 1’-0”
ELEVATOR
N VATION:
5
NOT USED
B7
A4
A2
B7
A4
ALIGN
SIGN 1305
SS CORRIDOR SIGN 1325/ 1326 SIGN 1327/ 1328
ELEVATION: SOCIAL SERVICES CORRIDOR
A9
A4
DOOR 2310A / DOOR 1310A SIGN 1306
SIGN 1307
NOTE: CONDITION IS SAME FOR FLOORS 1-2.
STOREFRONT & DOORS RECESSED
6
B8
ELEVATOR LOBBY ELEVATOR NOTE: CONDITION IS SAME QUADRANT D
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
10
3
ELEVATION: NAME SCALE: 1/8” = 1’-0”
DESIGN MADE
11
B2
B8
FOR FLOORS 1-3.
SCALE:
SCALE: 1/8” = 1’-0”
A6
NOTE: CONDITION IS SAME FOR SECOND FLOOR.
12
ELEVATION: NAME
A6
SCALE: 1/8” = 1’-0”A1
line indicates clg. height on first floor
11
A1
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
NOT USED 9
7
ELEVATION
ELEVATOR LOBBY -
ELEVATOR QUADRANT D THIRD FLOOR
SCALE: 1/8” = 1’-0” DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
ELEVATION: 8 ELEVATION:
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 96
10
EL
2
2
3
SG81
SG82
SG82
MOUNTING LAYOUT ELEVATIONS SPECIFIC COUNTY WIDE CORRIDOR SCALE: 1/4” = 1’-0”
A9
LCD1
LCD2
A1 A8
A2
A5
A2
LCD3
1
CW CORRIDOR SIGN 2244 TYPE: LCD1
DOOR 2002E SIGN 2245
2
DOOR 2002D SIGN 2247 SIGN 2246 TYPE: LCD3
DOOR 2002D SIGN 2248
3
CW CORRDOR SIGN 2254 TYPE: LCD2
DOOR 2002A
SIGN 2253
SIGN 2256 SIGN 2255
C3 C3 A9 +/- 9’-0”
A2
4
13
DOOR 1030A SIGN 1297 TYPE: A2
A5
A2
5
DOOR 1035A SIGN 1298 TYPE: A2
6
ELEVATION: 13 ELEVATION: COUNTY WIDE SHARED CORRIDOR COUNTY WIDE SHARED CORRIDOR
DOOR 1002A SIGN 1299 TYPE: A5, A2
A2
SIGN 1301 SIGN 1300
SCALE: 1/8” = 1’-0” SCALE: 1/8” = 1’-0” THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
7
CW/SS CORRIDOR SIGN 1302 SIGN 1303 TYPE: C3
SCALE: 1/4” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 97
MOUNTING LAYOUT ELEVATIONS SPECIFIC MAIN LOBBY
C1
C2
C2
+ 8’-6”
A3
1
A2
SECT: ENTRY LOBBY (LOOKING SOUTH) SIGN 1347 (C1) SIGN 1345 (C2) SIGN 1343 (C2) SCALE: 1/4” = 1’-0”
A10
C3
C3
C3
C3 A9
10’-11”+/-
10’-11”
9’-6”+/-
1
NOTE: ALIGN BOTTOM OF SIGNS TO BOTTOM OF STONE WALL TILE. SEE ELEVATION DWGS.
SECT (2/A-516): SS CORRIDOR SIGN 2256 (C4) SIGN 2255 (C4) SCALE: 1/4” = 1’-0”
THIS DRAWING REPRESENTS VISUAL CONCEPTS AND CONSTRUCTION SUGGESTIONS AS THEY VISUALLY EFFECT THE FINAL PRODUCT. DESIGN MADE LLC., DOES NOT ASSUME LIABILITY FOR ENGINEERING, CONSTRUCTION, OR USE. THIS DRAWING, ALL SIGN DESIGNS, ICONS, SYMBOLS, AND DIGITAL IMAGES FOR THIS PROJECT ARE COPYRIGHTED BY DESIGN MADE LLC., AND MAY NOT BE REPRODUCED OR DISPLAYED IN ANY FORM WITHOUT WRITTEN PERMISSION FROM DESIGN MADE LLC..
9’-6”
2
SECT (1/A-516): PH CORRIDOR SIGN 1061 (C3) SIGN 1060 (C3) SCALE: 1/4” = 1’-0”
DESIGN MADE
7 WASHINGTON STREET 2ND FLOOR MORRISTOWN - NJ 07960 T: 973 270 0233 W: design-made.com
DURHAM COUNTY HUMAN SERVICES WAYFINDING & SIGNAGE
REVISIONS: 08/13/2010 - FOR PROCUREMENT 06/25/2010 - FOR FINAL REVIEW 05/28/2010 - FOR COORD. UPDATE 05/03/2010 - FOR COORDINATION
DATE: 08 / 13 / 2010 ISSUED FOR PROCUREMENT
SG- 98