Products for Indoor Wood BASIC FINISHING 路 CLEANING 路 MAINTAINING
Preparing today for tomorrow
Index Basic finishing
Panel White
Basic Soap
Worktop Oil
Oil Mousse
Bees’ Wax Balm
Cleaning
Natural Soap in spray
Wood Cleaner
Basic finishing – Oil, wax and lacquer
Preparing today for tomorrow
Prior to an oil, wax or lacquer fi nishing, the wood must be completely clean, which means free from dirt and grease. Clean the wood with WOCA Wood Cleaner mixed with water in the recommended ratio. Ensure that the wood is completely dry before you treat it. Remove rising wood grain by sanding lightly with sandpaper. Panel White
Worktop Oil
Bees’ Wax
• Lightens up panels and ceilings made of light woods
• Strong protection against water, dirt and grease
• For fi nishing of small surfaces
• Gives a white wash fi nish
• For both light and dark wood species
• Enhances the natural structure of the wood
• Enhances the natural wood grain
• Solvent free
• Keeps the natural grains of the wood Basic Soap
• Water and dirt resistant
Natural Soap, sprayable
Oil Mousse
• For the unique „Scandinavian“ white wash soft fi nish
• For the cleaning of oiled, waxed
• Easy to apply
and soaped surfaces
• Low consumption • Does not create blotches • Does not drip
Furniture Panel Ceiling Worktop
Ba sp atu lm ra ra ya l S bl oa e p ,
W ax
N
s’ Be e
ou
ss e
Oi M
Oi l
kt op
ap So
W or
ic Ba s
Pa n
Basic Finishing
el
W
hi te
No
l
Yes
WOCA Panel White – for the lightening of yellowed wood, e.g. ceilings and wall panels
Preparing today for tomorrow
• For lightening of panels, doors and door frames made in light coloured types of wood • Ensures a light, lye treated appearance • Preserves the natural structure of the wood • Certifi ed by IBR
Product info Container: 2,5 litre Consumption: 10-12 m2/litre Available in white and extra white
Application area
After care
For lightening of any type of unfi nished or lacquered
Not required.
panels, doors and door frames made in light coloured types of wood. Not suitable for wood fl oors.
Result Penetrates into the pore system of the wood and provides the wood with a ”lye-like” appearance, which preserves the natural structure of the wood.
Application Apply with a brush in an even, not too thick layer. Clean all surfaces with Wood Cleaner before treatment. Sand lacquered surfaces slightly with a fi ne sandpaper.
Maintaining and cleaning Wash with a hard-wrung cloth.
How to do…
– WOCA Panel White: Lightening of yellowed wood
Preparing today for tomorrow
Tools Wide brush for lye or water based products. Small round brush for profi les and edges. Clean tools with water and soap.
Panel White is a water-based product for the lightening
Maintenance
up of yellowed wood, e.g. ceilings and wall panels.
The treated wood surface may be cleaned with Wood
Panel White is used indoors for untreated and lacquered
Cleaner mixed with water in the ratio 1:40.
softwood.
1 The wood must be clean and completely dry. Clean with Wood Cleaner mixed with water in the ratio 1:40. Wipe off with clean water. Loose lacquer residues applied earlier must be removed. It is recommendable to make a small test with the product on a less visible place to evaluate the result.
2 Stir Panel White carefully before and during use. Container with different batch numbers should be mixed before use to avoid differences in shade and gloss.
3 Apply the product with a brush in an even layer lengthwise the wood grain. Do not apply on more than 3-4 boards at the time and fi nish them to avoid overlaps.
It is recommendable to use a hard wrung cloth.
WOCA Basic Soap
– Soap treatment of furniture, floors and interior Preparing today for tomorrow
• Unique Scandinavian white wash soft fi nish • Protects the wood with a high soap concentrate • Water based • Easy saturation and cleaning • For the basic treatment of furniture, interior and wood fl oors • Certifi ed by IBR
Product info Container: 1 litre Consumption: 10-15 m2/litre Available in white
Application area
After care
WOCA Basic Soap is developed for basic treatment of furni-
After 24 hours the surface is cleaned with WOCA Natural
ture, interior and fl oors generally. Basic Soap is especially
Soap, White mixed with water 1:40, or WOCA Natural Soap
well suited for soaping of wood species such as oak, beech,
Spray, White.
ash, and soft wood. It does not discolour the wood and it saturates the wood grain.
Result Basic Soap creates a unique “Scandinavian” white wash soft fi nish which is resistant to dirt and fl uids.
Application Make sure that the soap is applied in a uniform quantity on surface using a sponge or a short haired paint roller.
Maintaining and cleaning Regular cleaning is done with WOCA Natural Soap, White mixed 1:40, or WOCA Natural Soap Spray, White.
How to do…
– WOCA Basic Soap: Soap treatment of furniture, floors and interior
Preparing today for tomorrow
Tools Wide brush for lye or water- based products. Small round brush for profi les and edges. Clean tools with water and soap.
1
2
3
4
WOCA Basic Soap is developed for basic treatment of
2 Immediately after, polish wet in wet with white or beige
furniture, interior and floors generally. Basic Soap is
polishing pad until surface appears saturated. Possibly
especially wellsuited for soaping of wood species such
repeat application to ensure full saturation.
as oak, beech, ash, and soft wood. It does not discolour the wood and it saturates the wood grain. Basic Soap creates a unique “Scandinavian” white wash soft finish which is resistant to dirt and fluids. Before the application of soap is done, make sure that the surface is freshly sanded with fi ne grit paper and cleaned with WOCA Wood Cleaner. Clean with 125 ml Wood Cleaner mixed with 5 litre water. Basic Soap is ready to use and do not mix it with water. Shake carefully before use.
1 Pour Basic Soap into a plastic bucket. Make sure that the soap is applied in a uniform quantity on surface using a sponge or a short haired paint roller.
3 Immediately after polishing, remove any excess material with cotton cloths. Keep polishing until the surface feels soft and smooth. Leave the surface to dry for approx. 24 hours.
4 After 24 hours the surface is cleaned with WOCA Natural Soap, White mixed with water 1:40, or WOCA Natural Soap Spray, White. After drying the surface is ready to use. Regular cleaning is done with WOCA Natural Soap, White mixed 1:40, or WOCA Natural Soap Spray, White.
WOCA Worktop Oil
– for the oil finishing of worktops in wood Preparing today for tomorrow
• Strong protection against water and dirt • Suitable for both light and dark types of wood • Enhances the colour of the wood • Certifi ed by IBR
Product info Container: 0,75 litre Consumption: 9-11 m2/litre Available in natural and white
Application area
After care
For the basic fi nishing and maintenance of worktops and
Remove excessive oil with a lint-free cotton cloth and
furniture.
polish the surface with a clean and dry cotton cloth. In case of a high absorbing surface it might become necessary to
Result Worktop Oil penetrates into the treated surface making the
repeat the treatment.
wood highly water- and dirt-repellent. Worktop Oil Natural
Maintaining and cleaning
provides dark types of wood with a golden nuance, whe-
For the regular cleaning apply Wood Cleaner or Natural
reas Worktop Oil White generates a lighter nuance.
Soap with a hard-wrung cloth. Treat with Worktop Oil as required.
Application Apply with a brush onto the clean and dry surface and polish with a pad.
How to do…
– WOCA Worktop Oil: Oil finishing of worktops in wood
Preparing today for tomorrow
Tools Brush, roller or lint-free cotton cloths. Possibly oil-wetted -sanding paper 320-400 grit and white polishing pad.
Clean tools with Solvent. Please notice!!
1
Risk of self-ignition! Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.
2
Worktop Oil is developed for untreated or previously
Next, wipe off all excess oil using a lint-free cotton cloth.
oiled/sanded wood surfaces. The oil makes the surface
Do not leave any excess oil on the surface.
highly water and dirt repellent.
Polish the wood carefully using a white polishing pad,
Use Worktop Oil, Natural, on dark wood species such as
which ensures a harder wearing surface.
mahogany, merbau, teak and cherry, etc. It gives the
Repeat the treatment on highly absorbent surfaces.
wood a mellow, golden colour.
The oil is thoroughly hardened after 24 hours at 20° C.
Use Worktop Oil, white, on light wood species such as ash, oak, beech, maple, birch and pine, to give the wood
Do not let the tabletop become wet during the hardening process.
a beautiful, light colour.
1 If the surface is particularly smooth, sand the surface
Maintenance
with sandpaper grit 180.
Use Worktop Oil or Oil Mousse to maintain the tabletop
Make sure the wood is dry and avoid of any dirt or grea-
four times a year, or as often as necessary. Before starting
se. Clean the wood with Wood Cleaner. After cleaning,
the maintenance procedure, clean the worktop using Wood
let the tabletop dry for at least 8 hours.
Cleaner, and let the surface dry for at least 8 hours.
2 Stir the oil thoroughly before use. Use a paintbrush to apply a suitable amount of oil in an even, adequate coat. Wait approx. 20-30 minutes at 20°C as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet lengthwise of the wood grain with sandpaper grit 320-400.
WOCA Oil Mousse – for the oil finishing of worktops in wood and indoor furniture
Preparing today for tomorrow
• Easy to dose • Economic in consumption • Does not blot • Does not drip • Suitable for vertical mounted woodwork • Certifi ed by IBR
Product info Container: 400 ml Consumption: 5-6 m2/400 ml Available in natural and white
Application area
After care
For the basic fi nishing of worktops and furniture.
In case of a high absorbing surface it might become necessary to repeat the treatment.
Result Oil Mousse penetrates into the treated surface making the
Maintaining and cleaning
wood highly water- and dirt-repellent. Oil Mousse Natural
For regular cleaning use Natural Cleaner or if necessary
provides dark types of wood with a golden nuance, whe-
Wood Cleaner. Use a hard-wrung cloth and as little water as
reas Oil Mousse White generates a lighter nuance.
possible. For regular maintenance treat with Oil Mousse if necessary.
Application Apply with a cloth on the clean and dry surface. Remove excessive oil and polish carefully with a white pad.
How to do…
– WOCA Oil Mousse: Oil finishing of worktops in wood and indoor furniture
Preparing today for tomorrow
Tools Cotton cloths and white polishing pad.
Clean tools with Solvent. Please notice!! Risk of self-ignition! Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.
1 2
Oil Mousse is developed for untreated or previously
2 Wait approx. 15-20 minutes at room temperature above
oiled/sanded wood surfaces. The mousse makes the
20°C as the oil penetrates into the wood. If necessary,
surface highly water and dirt repellent.
sand the wood while the surface is still wet with oil.
Oil Mousse Natural enhances the natural colour of the
Sand wet, lengthwise of the wood grain with sandpaper
wood and is particularly suitable for semi or dark colou-
320-400 grit to produce optimum surface fi nish.
red types of wood, e.g. mahogany, merbau, teak, cherry
Next, wipe off all excess oil using a lint-free cotton
et al., whereas Oil Mousse White provides light coloured
cloth. Do not leave any excess oil on the surface.
types of wood, such as ash, oak, beech, maple, birch,
Polish the wood carefully using a white polishing pad,
pine et al. with a natural light nuance.
which ensures a harder wearing surface.
1 Sand the surface with 180 or 220 grit to ensure the correct surface for maximum oil penetration result. Make sure the wood is dry and avoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning,
Repeat the treatment on highly absorbent surfaces. The oil is thoroughly hardened after 24 hours at room temperature above 20°C. Do not let the worktop become wet during the hardening process.
let the tabletop dry for at least 8 hours. Shake the can thoroughly before use.
Maintenance
Apply a suitable amount of Oil Mousse with a cloth in
Use Oil Mousse to maintain the tabletop as often as neces-
an even, adequate coat.
sary.
WOCA Bees’ Wax – for the waxing of indoor wood
Preparing today for tomorrow
• For the wax treatment of smaller wood surfaces • Water- and dirt resistant • Enhances the natural structure of the wood • Certifi ed by IBR
Product info Container: 250 ml can Available in natural Consumption: 8-10 m2/250 ml
Application area
After care
For the wax treatment of unifi nished, stain- or lye treated
Polish with a lint-free cotton cloth.
wood surfaces (typically trays, wood accessories and smaller pieces of furniture).
Result The treatment generates a silky-mat, smooth surface which is both water- and dirt resisitant and enhances the natural structure of the wood.
Application Use a dry cloth to polish on to clean and dustfree surfaces.
Maintenance and cleaning If necessary clean the treated surface with Wood Cleaner or Natural Soap. If necessary maintain with Bees’ Wax Balm.
How to do…
– WOCA Bees’ Wax Balm: Waxing of furniture and articles for everyday use
Preparing today for tomorrow
Tools Soft lint-free cotton cloths for the application and lint-free cotton cloths or polishing pad for the polishing. Clean tools with turpentine.
Bees’ Wax Balm is used for the basic treatment and
2 After a drying time of approx. 30 minutes the wood may
maintenance of untreated, stained or lye treated wood
be polished with a cotton cloth.
surfaces indoors (especially for furniture and toys).
Tip: To obtain a hard-wearing surface rough wood may
Bees’ Wax Balm is suitable for all wood species.
require an initial fi nish with Wood Floor Oil before it is
The wax treatment gives the wood a dirt resistant and easy to clean surface. Bees’ Wax Balm is not suitable for flooring. Bees’ Wax Balm is solvent free.
1 Before the application of Bees’ Wax the wood must be clean, free from grease and completely dry. Apply Bees’ Wax with a lint-free cotton cloth in a thin and even layer.
treated with Bees’ Wax after the drying time of the oil.
3 Bees’ Wax may be applied in a thin layer and afterwards polished into the wood.
Cleaning – Oil, wax and lacquer
Preparing today for tomorrow
Maintenance of wood surfaces Natural Soap Spray – natural and white • Cleaning of oiled, waxed and soaped surfaces • Basic finish and maintenance of soaped surfaces
Furniture Panel Ceiling Worktop Wood floors
ne ea Cl
d W oo
at u N
Cleaning
ra l
So
ap
No
r
Sp
ra y
Yes
Wood Cleaner • Grease removing basic cleaning of all surfaces
WOCA Natural Soap, sprayable – Maintenance of oiled, waxed and soaped surfaces
Preparing today for tomorrow
• For the cleaning and maintenance of all wood surfaces • Suitable for toys • Replenishes grease • Certifi ed by IBR
Product info Container: 750 ml spray Available in natural and white
Application area
Application
Natural Soap is ideal for the cleaning of oiled, waxed and
Apply a cloth.
soaped surfaces. Natural Soap is a purpose-made qualitysoap, which due to its nourishing properties quickly closes the pores of the wood. This causes a good protection of the surface against dirt and liquids. Natural Soap White is used
After care Not required.
for white oiled surfaces, whereas Natural Soap Natural is used for surfaces which have been treated with Oil Natural or Colour Oil. The ready mixed spray facilitates the maintenance of oiled furniture, doors, table tops, panels, stairs, fl oors etc.
Result The cleaning with Natural Soap removes dirt and provides the wood with a protective fi nish and has therefore both cleaning and nourishing properties. Natural Soap is therefore ideal for the basic treatment of pine fl oors if a treatment with soap is preferred to one with oil.
Maintenance and cleaning With each cleaning process dirt and old soap layers are removed and replaced by a new protective soap layer.
How to do…
– WOCA Natural Soap: Cleaning of oiled, waxed and soaped surfaces
Preparing today for tomorrow
Tools Soft lint-free cotton cloths. Clean tools with water and soap.
1 2
Natural Soap is ideal for cleaning and maintenance of oiled, waxed and natural soaped surfaces. Natural Soap is a purpose-made quality soap, which due to its nourishing properties quickly closes the pores of the wood and protects against dirt and penetration of liquids. Natural Soap ‘White’ is recommended for surfaces treated with white oil, while Natural Soap ‘Natural’ is ideal for surfaces treated with natural or colour oil. The readymixed Spray makes the maintaining of oiled furniture, doors, table tops, panels, stairs, floors etc. easier.
1 Shake the spray well before use. 2 Spray the Natural Soap on the surface. 3 Wipe the surface with a cotton cloth. Tip: very dirty stains can be cleaned with the WOCA Spot Remover or WOCA Wood Cleaner.
WOCA Wood Cleaner
– for the basic cleaning of unfinished and treated wood surfaces, regardless of the basic finish
Preparing today for tomorrow
• For untreated, oiled or soaped indoor woodwork • Basic cleaning and grease removing • High effi ciency • Certifi ed by IBR
Product info Container: 1 l and 2,5 l Consumption: 200-300 m2/l depending on the surface
Application area
Application
Wood Cleaner is used for the cleaning of oiled surfaces
Mix 125 ml Wood Cleaner with 5 l lukewarm water.
indoors. Wood Cleaner is also used for the cleaning prior to
Apply with mop or machine.
a basic fi nish with oil or soap and prior to a treatment with lye.
Result Wood Cleaner has a high grease removing effect and dissolves e.g. old soapfi lm, grease and dirt, whereas oil is not affected.
After care Soaped fl oors with Natural Soap. Oiled fl oors with Maintenance Paste or Maintenance Oil.
How to do…
– WOCA Wood Cleaner: for the basic cleaning of unfinished and treated wood surfaces, regardless of the basic finish
Preparing today for tomorrow
Tools 2 plastic buckets, mop, polishing pad, fl oor cloth or - the like. Clean tools with water and soap.
Wood Cleaner may be used for the cleaning of lye treated, soaped, oiled, waxed and lacquered surfaces. Furthermore, it is well suited for cleaning of unfinished wall- and ceiling panels, furniture etc. Removes grease, dirt and soap residues.
1 Mix 125 ml Wood Cleaner into 5 l of lukewarm water. Wipe surface with solution with hard wrung cloth.
2 Always wipe a second time to minimise the exposure of water to the surface. Repeat operation if necessary. Tip: Always work with two buckets in cases of large areas – one with Wood Cleaner mix with water and one with rinse clear water.