St proiezione gb

Page 1

FRAME

ALUMINIUM FRAME Frame in extruded aluminium alloy Al 6060 T5. Standard colours available: white (RAL 9010) & anodised silver. Powder coated RAL colours are available upon request.

140

®

40

31,5

37,5

GP42

GP32

42

GP42D

FD42

Only for double module

MARQUISOLETTE System

ST-PRO-GB

CT110

38,7

44

CP147

44

217

Ø 116

OVERALL DIMENSIONS 620 147 to be defined by customer W

(min. 57)

217

300

W-152

150

H

684

Face mounting with distancing brackets

®

Lateral mounting (GP32 only)

ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 039684611 Fax +39 0396846140 export@resstende.com www.resstende.com

Double sided channel GP42D for continuous covering of building façades

New lifestyles, new blind systems


Resstende S.rl. a leading Italian company in the production of roller blinds, proposes the MARQUISOLETTE system: a vertical blind designed for outdoor applications, specifically for side-to-side mounting on building façades. The blind has two arms that rotate from 0 to 160° hence tilting the bottom part of the fabric, allowing air to circulate in to the room without reducing the level of solar protection. The blind is available in a manual (crank) or motorised version.

EXPLODED VIEW OF MARQUISOLETTE BLIND MODELS PACGL370 / PMCGL3507

PRODUCT DESCRIPTION Manual system with crank (model PACGL370): Operated by a gear box ratio 1:5. Tubular crank rod in extruded aluminium, Ø 13 mm with PVC coated folding handle. Optional accessories: 90° through wall coupling ; bayonet fitting. Motorised system (models PMCGL350-PMCGL3507- PMCGL3507D): Single phase tubular motor Ø 47, 230V/50Hz complete with endstop and mains cable. Thermal cutout to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.

2

7

Structure composed of: Roller tube: in extruded aluminium (Ø 53/57) or 1.25 mm galvanized steel (Ø 70, Ø 78), with slot for easy dismounting & remounting of the fabric.

6 5

1

0

Box: available with or without box, mod. CT110 (Ø116 mm) in extruded aluminium or mod. CP147 (Ø 147 mm) in curved sheet aluminium. Powder coated or anodised cast aluminium end cheeks that fit into, and are supported by, single or double side channels.

7 L3

G

C PA

Sliding arms: the projecting system has a fixed idler tube (Ø 40 mm) in extruded aluminium that keeps the top part of the fabric in a vertical plane; two aluminium arms with sliders and self-aligning rollers that rotate from 0 to 160° hence inclining the bottom part of the fabric (0 to 80°); and an adequately weighted extruded aluminium front rail (mod. FD42, Ø 42 mm) fixed to the arms. The length of the drop arms is 600 mm with a stainless steel assist spring attached to the fixed arm. The whole system blocks automatically in retraction and extension (at the point where the arms start to project), these stop points may be set at any height.

21

4

11

07

3

Side channels: in extruded aluminium, mod. GP32 (31,5 x 37,5 mm), GP42 (40 x 44 mm) or mod. GP42D (double sided for continuous façades). The whole projecting arm structure (bottom rail, idler tube and arms) slides up and down the side channels.

10

1 CAST ALUMINIUM END CHEEKS 2 BOX CP147 3 GEAR BOX RATIO 1:5 4 END PLUG Ø 70 GEAR SIDE 5 BRASS BUSH BEARING 6 STEEL ROLLER TUBE Ø 70 7 OPPOSITE SIDE END PLUG 8 90° THROUGH WALL COUPLING & CRANK ROD 9 TUBULAR MOTOR 10 STEEL ROLLER TUBE Ø 78 11 OPPOSITE SIDE END PLUG 12 MOTOR MOUNTING BRACKET 13 GP42 SIDE CHANNELS 14 BOTTOM RAIL FD42 15 IDLER ROLLER TUBE Ø 40 16 DISTANCING BRACKETS 17 ARM ASSEMBLY 18 IDLER TUBE END CAPS 19 SIDE CHANNEL GP42 END CAPS 20 BOTTOM RAIL END CAPS 21 FABRIC

5 L3

CG

PM

18

8

Single blind with box CP147 and model GP42 side channels. Alternatively, the blind may be supplied with the CT110 box or without box.

9

15

12 14 20

Telo: Suitable fabrics for the Marquisolette blind are SUNSCREEN SATINE’ 5500, SOLTIS 86/92/92B and ESTORYL The blinds may be face mounting using distancing brackets (brackct height chosen according to specific application) or side mounted directly to the wall (mod. GP32 only). 13

17 16

Upon request: double module with single motor and double sided channels mod GP42D. The GP42D side channels allow blinds to be mounted side-to-side to form a contiuous covering of the façade.

19

TECHNICAL DATA MODEL OPERATION

PM0GL350 PMCGL350

CRANK

PM0GL3507 PMCGL3507

PM0GL3507D PMCGL3507D

MOTORISED

Ø 70

Ø 53/57

Ø 78

Ø 78

NOMINAL COUPLE

-

10 Nm

15 Nm

25 Nm

OPERATING SPEED

1:5

5 cm/s

7 cm/s

7 cm/s

15 Kg

32 Kg

39 Kg

65 Kg

ROLLER TUBE

MAX LIFTING WEIGHT

Blind with projecting arms 0° to 160°.

PA0GL370 PACGL370

VOLTAGE

-

ABSORBED POWER

-

CE MARKING

-

230 V / 50 Hz 120 W

140 W

180 W

CEI 60335-2-97 - UNI EN 13561 SP-010 SP-002

INSTALLATION SHEETS USERS & MAINTENANCE MANUAL

MT-004

MIN DIMENSIONS WxH (cm)

80x250

80x250

80x250

160x250

MAX DIMENSIONS WxH (cm)

300X320

300X320

250x500

500x500


Resstende S.rl. a leading Italian company in the production of roller blinds, proposes the MARQUISOLETTE system: a vertical blind designed for outdoor applications, specifically for side-to-side mounting on building façades. The blind has two arms that rotate from 0 to 160° hence tilting the bottom part of the fabric, allowing air to circulate in to the room without reducing the level of solar protection. The blind is available in a manual (crank) or motorised version.

EXPLODED VIEW OF MARQUISOLETTE BLIND MODELS PACGL370 / PMCGL3507

PRODUCT DESCRIPTION Manual system with crank (model PACGL370): Operated by a gear box ratio 1:5. Tubular crank rod in extruded aluminium, Ø 13 mm with PVC coated folding handle. Optional accessories: 90° through wall coupling ; bayonet fitting. Motorised system (models PMCGL350-PMCGL3507- PMCGL3507D): Single phase tubular motor Ø 47, 230V/50Hz complete with endstop and mains cable. Thermal cutout to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.

2

7

Structure composed of: Roller tube: in extruded aluminium (Ø 53/57) or 1.25 mm galvanized steel (Ø 70, Ø 78), with slot for easy dismounting & remounting of the fabric.

6 5

1

0

Box: available with or without box, mod. CT110 (Ø116 mm) in extruded aluminium or mod. CP147 (Ø 147 mm) in curved sheet aluminium. Powder coated or anodised cast aluminium end cheeks that fit into, and are supported by, single or double side channels.

7 L3

G

C PA

Sliding arms: the projecting system has a fixed idler tube (Ø 40 mm) in extruded aluminium that keeps the top part of the fabric in a vertical plane; two aluminium arms with sliders and self-aligning rollers that rotate from 0 to 160° hence inclining the bottom part of the fabric (0 to 80°); and an adequately weighted extruded aluminium front rail (mod. FD42, Ø 42 mm) fixed to the arms. The length of the drop arms is 600 mm with a stainless steel assist spring attached to the fixed arm. The whole system blocks automatically in retraction and extension (at the point where the arms start to project), these stop points may be set at any height.

21

4

11

07

3

Side channels: in extruded aluminium, mod. GP32 (31,5 x 37,5 mm), GP42 (40 x 44 mm) or mod. GP42D (double sided for continuous façades). The whole projecting arm structure (bottom rail, idler tube and arms) slides up and down the side channels.

10

1 CAST ALUMINIUM END CHEEKS 2 BOX CP147 3 GEAR BOX RATIO 1:5 4 END PLUG Ø 70 GEAR SIDE 5 BRASS BUSH BEARING 6 STEEL ROLLER TUBE Ø 70 7 OPPOSITE SIDE END PLUG 8 90° THROUGH WALL COUPLING & CRANK ROD 9 TUBULAR MOTOR 10 STEEL ROLLER TUBE Ø 78 11 OPPOSITE SIDE END PLUG 12 MOTOR MOUNTING BRACKET 13 GP42 SIDE CHANNELS 14 BOTTOM RAIL FD42 15 IDLER ROLLER TUBE Ø 40 16 DISTANCING BRACKETS 17 ARM ASSEMBLY 18 IDLER TUBE END CAPS 19 SIDE CHANNEL GP42 END CAPS 20 BOTTOM RAIL END CAPS 21 FABRIC

5 L3

CG

PM

18

8

Single blind with box CP147 and model GP42 side channels. Alternatively, the blind may be supplied with the CT110 box or without box.

9

15

12 14 20

Telo: Suitable fabrics for the Marquisolette blind are SUNSCREEN SATINE’ 5500, SOLTIS 86/92/92B and ESTORYL The blinds may be face mounting using distancing brackets (brackct height chosen according to specific application) or side mounted directly to the wall (mod. GP32 only). 13

17 16

Upon request: double module with single motor and double sided channels mod GP42D. The GP42D side channels allow blinds to be mounted side-to-side to form a contiuous covering of the façade.

19

TECHNICAL DATA MODEL OPERATION

PM0GL350 PMCGL350

CRANK

PM0GL3507 PMCGL3507

PM0GL3507D PMCGL3507D

MOTORISED

Ø 70

Ø 53/57

Ø 78

Ø 78

NOMINAL COUPLE

-

10 Nm

15 Nm

25 Nm

OPERATING SPEED

1:5

5 cm/s

7 cm/s

7 cm/s

15 Kg

32 Kg

39 Kg

65 Kg

ROLLER TUBE

MAX LIFTING WEIGHT

Blind with projecting arms 0° to 160°.

PA0GL370 PACGL370

VOLTAGE

-

ABSORBED POWER

-

CE MARKING

-

230 V / 50 Hz 120 W

140 W

180 W

CEI 60335-2-97 - UNI EN 13561 SP-010 SP-002

INSTALLATION SHEETS USERS & MAINTENANCE MANUAL

MT-004

MIN DIMENSIONS WxH (cm)

80x250

80x250

80x250

160x250

MAX DIMENSIONS WxH (cm)

300X320

300X320

250x500

500x500


Resstende S.rl. a leading Italian company in the production of roller blinds, proposes the MARQUISOLETTE system: a vertical blind designed for outdoor applications, specifically for side-to-side mounting on building façades. The blind has two arms that rotate from 0 to 160° hence tilting the bottom part of the fabric, allowing air to circulate in to the room without reducing the level of solar protection. The blind is available in a manual (crank) or motorised version.

EXPLODED VIEW OF MARQUISOLETTE BLIND MODELS PACGL370 / PMCGL3507

PRODUCT DESCRIPTION Manual system with crank (model PACGL370): Operated by a gear box ratio 1:5. Tubular crank rod in extruded aluminium, Ø 13 mm with PVC coated folding handle. Optional accessories: 90° through wall coupling ; bayonet fitting. Motorised system (models PMCGL350-PMCGL3507- PMCGL3507D): Single phase tubular motor Ø 47, 230V/50Hz complete with endstop and mains cable. Thermal cutout to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.

2

7

Structure composed of: Roller tube: in extruded aluminium (Ø 53/57) or 1.25 mm galvanized steel (Ø 70, Ø 78), with slot for easy dismounting & remounting of the fabric.

6 5

1

0

Box: available with or without box, mod. CT110 (Ø116 mm) in extruded aluminium or mod. CP147 (Ø 147 mm) in curved sheet aluminium. Powder coated or anodised cast aluminium end cheeks that fit into, and are supported by, single or double side channels.

7 L3

G

C PA

Sliding arms: the projecting system has a fixed idler tube (Ø 40 mm) in extruded aluminium that keeps the top part of the fabric in a vertical plane; two aluminium arms with sliders and self-aligning rollers that rotate from 0 to 160° hence inclining the bottom part of the fabric (0 to 80°); and an adequately weighted extruded aluminium front rail (mod. FD42, Ø 42 mm) fixed to the arms. The length of the drop arms is 600 mm with a stainless steel assist spring attached to the fixed arm. The whole system blocks automatically in retraction and extension (at the point where the arms start to project), these stop points may be set at any height.

21

4

11

07

3

Side channels: in extruded aluminium, mod. GP32 (31,5 x 37,5 mm), GP42 (40 x 44 mm) or mod. GP42D (double sided for continuous façades). The whole projecting arm structure (bottom rail, idler tube and arms) slides up and down the side channels.

10

1 CAST ALUMINIUM END CHEEKS 2 BOX CP147 3 GEAR BOX RATIO 1:5 4 END PLUG Ø 70 GEAR SIDE 5 BRASS BUSH BEARING 6 STEEL ROLLER TUBE Ø 70 7 OPPOSITE SIDE END PLUG 8 90° THROUGH WALL COUPLING & CRANK ROD 9 TUBULAR MOTOR 10 STEEL ROLLER TUBE Ø 78 11 OPPOSITE SIDE END PLUG 12 MOTOR MOUNTING BRACKET 13 GP42 SIDE CHANNELS 14 BOTTOM RAIL FD42 15 IDLER ROLLER TUBE Ø 40 16 DISTANCING BRACKETS 17 ARM ASSEMBLY 18 IDLER TUBE END CAPS 19 SIDE CHANNEL GP42 END CAPS 20 BOTTOM RAIL END CAPS 21 FABRIC

5 L3

CG

PM

18

8

Single blind with box CP147 and model GP42 side channels. Alternatively, the blind may be supplied with the CT110 box or without box.

9

15

12 14 20

Telo: Suitable fabrics for the Marquisolette blind are SUNSCREEN SATINE’ 5500, SOLTIS 86/92/92B and ESTORYL The blinds may be face mounting using distancing brackets (brackct height chosen according to specific application) or side mounted directly to the wall (mod. GP32 only). 13

17 16

Upon request: double module with single motor and double sided channels mod GP42D. The GP42D side channels allow blinds to be mounted side-to-side to form a contiuous covering of the façade.

19

TECHNICAL DATA MODEL OPERATION

PM0GL350 PMCGL350

CRANK

PM0GL3507 PMCGL3507

PM0GL3507D PMCGL3507D

MOTORISED

Ø 70

Ø 53/57

Ø 78

Ø 78

NOMINAL COUPLE

-

10 Nm

15 Nm

25 Nm

OPERATING SPEED

1:5

5 cm/s

7 cm/s

7 cm/s

15 Kg

32 Kg

39 Kg

65 Kg

ROLLER TUBE

MAX LIFTING WEIGHT

Blind with projecting arms 0° to 160°.

PA0GL370 PACGL370

VOLTAGE

-

ABSORBED POWER

-

CE MARKING

-

230 V / 50 Hz 120 W

140 W

180 W

CEI 60335-2-97 - UNI EN 13561 SP-010 SP-002

INSTALLATION SHEETS USERS & MAINTENANCE MANUAL

MT-004

MIN DIMENSIONS WxH (cm)

80x250

80x250

80x250

160x250

MAX DIMENSIONS WxH (cm)

300X320

300X320

250x500

500x500


FRAME

ALUMINIUM FRAME Frame in extruded aluminium alloy Al 6060 T5. Standard colours available: white (RAL 9010) & anodised silver. Powder coated RAL colours are available upon request.

140

®

40

31,5

37,5

GP42

GP32

42

GP42D

FD42

Only for double module

MARQUISOLETTE System

ST-PRO-GB

CT110

38,7

44

CP147

44

217

Ø 116

OVERALL DIMENSIONS 620 147 to be defined by customer W

(min. 57)

217

300

W-152

150

H

684

Face mounting with distancing brackets

®

Lateral mounting (GP32 only)

ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 039684611 Fax +39 0396846140 export@resstende.com www.resstende.com

Double sided channel GP42D for continuous covering of building façades

New lifestyles, new blind systems


FRAME

ALUMINIUM FRAME Frame is in extruded aluminium alloy Al 6060 T5. Standard colours available: white RAL9010, anodised silver, black & bronze. Powder coated RAL colours are available upon request.

28

12 80

23

42

42

®

FG42

G80

104,5 88,50

83

CT90

C90

103

116,5

116,5

CT76

99

99

88

76

CT105

Guided System

C105

143

161

CV140

CT76

C83

C103/CT103

CV140

C150

MAX WIDTH VERTICAL BLIND (cm)

BOX

220

330

500

500

500

MAX WIDTH HORIZONTAL BLIND (cm)

160

160

200

200

200

SP-104

SP-101

SP-105

SP-107

SP-106

INSTALLATION SHEET

OVERALL DIMENSIONS

ST-GR-GB

TYPE R

FG42R

MOUNTING OPTIONS FOR HORIZONTAL MODEL

VERTICAL MODEL 3

50

W 4,5

5

Reverse H

43,5

600 -900*

Standard

Oscurante Filtrante

* Reinforcement rod normally positioned every 600-900 mm

ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 0396846122 Fax +39 0396846140 Ph. +39 0396846122 Export info@resstende.com export@resstende.com www.resstende.com

80

3

Possibility of twin fabric upon request 23,5

New lifestyles, new blind systems


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.