FRAME
ALUMINIUM FRAME Extruded aluminium alloy frame (Al 6060 T5). Standard colours available: white (RAL 9010), brown (RAL 8017) & anodised silver. Other powder coated RAL colours are available upon request.
65
65
143
GVS
®
57
Blind extension (mm)
1 module
2 modules
upto 1750
4
6
1751 - 2750
6
10
2751 - 4000
8
12
4001 - 5000
10
16
FIXING BRACKETS
A level mounting (standard)
B embedded mounting
C lateral mounting with angle plate 60x60x100
D lateral mounting with angle plate 50x100x100
VERANDA System
ST-VER-GB
FV92
92
N° OF BRACKETS
60
161
CV140
E distancing bracket (height 50-200 upon request)
OVERALL DIMENSIONS
2
SINGLE MODULE (VER507) 32,5
W - 65
30
Mounting double module model VER507D
min. distance from ceiling
50
145
300
min
900 max
H
ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 0396846122 Fax +39 0396846140 info@resstende.com www.resstende.com
65
W - 148 W
9
gap between guide and fabric
40-200
38
final position of traction bar
Ø120 max
All dimensions in mm
New lifestyles, new blind systems
Resstende S.r.l., a leading Italian company in the production of roller blinds, presents the VERANDA System: a solid and elegant awning designed for verandas and other large horizontal or slanted glassed areas. When installed outdoors, the system provides optimum sun protection and maximum reduction of the greenhouse effect. The Veranda blind has a specially designed traction bar to guarantee constant fabric tension in any position and is therefore ideale not only for horizontal/sloped applications but also vertical windows where the blind is required to open from the ground upwards. The blinds may be installed side by side to form a continuous facade, the double module is operated by a single motor.
EXPLODED VIEW OF VERANDA AWNING
PRODUCT DESCRIPTION Veranda System (model VER507 -VER507D): Motorised roller blind principally for outdoor installations with a specially designed system to guarantee constant fabric tension in any position. The fabric is kept taut by a large spring inside the traction bar attached to Ø 2.5 mm galvanised steel cables (PES HT) wound onto pulleys (PEHD) mounted on each end of the roller tube. Also available a double module blind (VER507D) operated by a single motor.
1
Tubolar motor : Ø 47 mm (230V/50Hz) with mains cable, adjustable limit switch, thermal cut-out to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.
2
10 8
The blind structure is made of heavy duty extruded aluminium profiles, consisting of:
11
9
7
Roller tube: Ø 78 mm galvanized steel tube, thickness 1.25 mm, with special groove into which the welded strip on the fabric is inserted.
6 3
4
Box: with removable cover, mod. CV140 (143 x 161 mm) with high resistance cast aluminium lateral cheeks.
13
Guide rails: mod. GVS (65x65 mm), with high resistance cast aluminium end covers and incorporated pulleys for the cable hidden inside the guide rails.
5
24
25
23
12
Traction bar: mod. FV92 with removable cover (80x55 mm) containing the pretensioning system. The traction bar is mounted on ball bearing sliding units.
TECHNICAL CHARACTERISTICS
17
Chamber of Commerce in Taranto
Fabric: The most suitable fabrics for the Veranda system are SOLTIS 86, SOLTIS 92, SOLTIS B92 and ESTORYL.
Max wind pressure = 110 N/m² (Beaufort scale 6) Wind resistance: Class 3
14 22
Optimum solar protection, and maximum reduction of the greenhouse effect, may be obtained by positioning the blind outdoors at approximately 40 cm from the window pane. The use of a centralised control unit with sun and wind sensors is recommended for outdoor awnings.
The Veranda has a wide choice of fixing brackets for mounting on any surface.
“Solidarietà e Servizi” offices in Varese
1 BOX CV140 FIXED PART 2 BOX CV140 REMOVABLE PART 3 END CHEEKS CV140 4 ALUMINIUM BRACKET 5 OPPOSITE SIDE END CAP 6 Ø 78 CABLE PULLEY 7 Ø 78 MOTOR BRACKET 8 TUBOLAR MOTOR 30 Nm 9 SQUARE PIN FOR MOTOR 10 MOTOR ADAPTER Ø78 11 MOTOR FIXING BRACKET 12 FABRIC 13 STEEL ROLLER TUBE Ø78 14 MOUNTING BRACKETS TYPE A 15 GUIDE RAIL GVS 16 GUIDE RAIL CAP GVS 17 RIGID Ø 7 mm ROD 18 SLIDING UNIT FOR FV92 19 CABLE TERMINAL 20 SPRING 21 PVC TUBE FOR Ø40 SPRING 22 TRACTION BAR COVER FV92 23 TRACTION BAR FV92 24 CABLE BLOCK WITH SWIVEL 25 “S” HOOK 26 Ø 2.5 mm CABLE
19 18
20
26 21
16
15
Certificate: AK 60015107 Model: VER507
TECHNICAL DATA MODEL OPERATION NOMINAL COUPLE (Min)
VER507
MOTORISED 30 Nm
OPERATING SPEED MAX LIFTING WEIGHT
Galleria Mazzini in Genoa
VOLTAGE ABSORBED CURRENT CE MARKING Constant fabric tension even when mounted horizontally. The maximum surface area that may be covered is 18 m² per module.
USERS & MAINTENANCE MANUAL INSTALLATION SHEETS MAX DIMENSIONS PER MODULE
VER507D
35-40 Nm
11 cm/s max 75 Kg
90 Kg
230 V / 50 Hz 1.1 A CEI 60335-2-97 UNI EN 13561 MT-003 SP-001 Width 450 cm, Height 500 cm max surface area 18 m2
Resstende S.r.l., a leading Italian company in the production of roller blinds, presents the VERANDA System: a solid and elegant awning designed for verandas and other large horizontal or slanted glassed areas. When installed outdoors, the system provides optimum sun protection and maximum reduction of the greenhouse effect. The Veranda blind has a specially designed traction bar to guarantee constant fabric tension in any position and is therefore ideale not only for horizontal/sloped applications but also vertical windows where the blind is required to open from the ground upwards. The blinds may be installed side by side to form a continuous facade, the double module is operated by a single motor.
EXPLODED VIEW OF VERANDA AWNING
PRODUCT DESCRIPTION Veranda System (model VER507 -VER507D): Motorised roller blind principally for outdoor installations with a specially designed system to guarantee constant fabric tension in any position. The fabric is kept taut by a large spring inside the traction bar attached to Ø 2.5 mm galvanised steel cables (PES HT) wound onto pulleys (PEHD) mounted on each end of the roller tube. Also available a double module blind (VER507D) operated by a single motor.
1
Tubolar motor : Ø 47 mm (230V/50Hz) with mains cable, adjustable limit switch, thermal cut-out to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.
2
10 8
The blind structure is made of heavy duty extruded aluminium profiles, consisting of:
11
9
7
Roller tube: Ø 78 mm galvanized steel tube, thickness 1.25 mm, with special groove into which the welded strip on the fabric is inserted.
6 3
4
Box: with removable cover, mod. CV140 (143 x 161 mm) with high resistance cast aluminium lateral cheeks.
13
Guide rails: mod. GVS (65x65 mm), with high resistance cast aluminium end covers and incorporated pulleys for the cable hidden inside the guide rails.
5
24
25
23
12
Traction bar: mod. FV92 with removable cover (80x55 mm) containing the pretensioning system. The traction bar is mounted on ball bearing sliding units.
TECHNICAL CHARACTERISTICS
17
Chamber of Commerce in Taranto
Fabric: The most suitable fabrics for the Veranda system are SOLTIS 86, SOLTIS 92, SOLTIS B92 and ESTORYL.
Max wind pressure = 110 N/m² (Beaufort scale 6) Wind resistance: Class 3
14 22
Optimum solar protection, and maximum reduction of the greenhouse effect, may be obtained by positioning the blind outdoors at approximately 40 cm from the window pane. The use of a centralised control unit with sun and wind sensors is recommended for outdoor awnings.
The Veranda has a wide choice of fixing brackets for mounting on any surface.
“Solidarietà e Servizi” offices in Varese
1 BOX CV140 FIXED PART 2 BOX CV140 REMOVABLE PART 3 END CHEEKS CV140 4 ALUMINIUM BRACKET 5 OPPOSITE SIDE END CAP 6 Ø 78 CABLE PULLEY 7 Ø 78 MOTOR BRACKET 8 TUBOLAR MOTOR 30 Nm 9 SQUARE PIN FOR MOTOR 10 MOTOR ADAPTER Ø78 11 MOTOR FIXING BRACKET 12 FABRIC 13 STEEL ROLLER TUBE Ø78 14 MOUNTING BRACKETS TYPE A 15 GUIDE RAIL GVS 16 GUIDE RAIL CAP GVS 17 RIGID Ø 7 mm ROD 18 SLIDING UNIT FOR FV92 19 CABLE TERMINAL 20 SPRING 21 PVC TUBE FOR Ø40 SPRING 22 TRACTION BAR COVER FV92 23 TRACTION BAR FV92 24 CABLE BLOCK WITH SWIVEL 25 “S” HOOK 26 Ø 2.5 mm CABLE
19 18
20
26 21
16
15
Certificate: AK 60015107 Model: VER507
TECHNICAL DATA MODEL OPERATION NOMINAL COUPLE (Min)
VER507
MOTORISED 30 Nm
OPERATING SPEED MAX LIFTING WEIGHT
Galleria Mazzini in Genoa
VOLTAGE ABSORBED CURRENT CE MARKING Constant fabric tension even when mounted horizontally. The maximum surface area that may be covered is 18 m² per module.
USERS & MAINTENANCE MANUAL INSTALLATION SHEETS MAX DIMENSIONS PER MODULE
VER507D
35-40 Nm
11 cm/s max 75 Kg
90 Kg
230 V / 50 Hz 1.1 A CEI 60335-2-97 UNI EN 13561 MT-003 SP-001 Width 450 cm, Height 500 cm max surface area 18 m2
Resstende S.r.l., a leading Italian company in the production of roller blinds, presents the VERANDA System: a solid and elegant awning designed for verandas and other large horizontal or slanted glassed areas. When installed outdoors, the system provides optimum sun protection and maximum reduction of the greenhouse effect. The Veranda blind has a specially designed traction bar to guarantee constant fabric tension in any position and is therefore ideale not only for horizontal/sloped applications but also vertical windows where the blind is required to open from the ground upwards. The blinds may be installed side by side to form a continuous facade, the double module is operated by a single motor.
EXPLODED VIEW OF VERANDA AWNING
PRODUCT DESCRIPTION Veranda System (model VER507 -VER507D): Motorised roller blind principally for outdoor installations with a specially designed system to guarantee constant fabric tension in any position. The fabric is kept taut by a large spring inside the traction bar attached to Ø 2.5 mm galvanised steel cables (PES HT) wound onto pulleys (PEHD) mounted on each end of the roller tube. Also available a double module blind (VER507D) operated by a single motor.
1
Tubolar motor : Ø 47 mm (230V/50Hz) with mains cable, adjustable limit switch, thermal cut-out to prevent overheating and water tight housing with level IP44 protection. Optional accessories: remote control with/without incorporated receiver, electronic board for multilevel centralised operation, sun/ wind control unit.
2
10 8
The blind structure is made of heavy duty extruded aluminium profiles, consisting of:
11
9
7
Roller tube: Ø 78 mm galvanized steel tube, thickness 1.25 mm, with special groove into which the welded strip on the fabric is inserted.
6 3
4
Box: with removable cover, mod. CV140 (143 x 161 mm) with high resistance cast aluminium lateral cheeks.
13
Guide rails: mod. GVS (65x65 mm), with high resistance cast aluminium end covers and incorporated pulleys for the cable hidden inside the guide rails.
5
24
25
23
12
Traction bar: mod. FV92 with removable cover (80x55 mm) containing the pretensioning system. The traction bar is mounted on ball bearing sliding units.
TECHNICAL CHARACTERISTICS
17
Chamber of Commerce in Taranto
Fabric: The most suitable fabrics for the Veranda system are SOLTIS 86, SOLTIS 92, SOLTIS B92 and ESTORYL.
Max wind pressure = 110 N/m² (Beaufort scale 6) Wind resistance: Class 3
14 22
Optimum solar protection, and maximum reduction of the greenhouse effect, may be obtained by positioning the blind outdoors at approximately 40 cm from the window pane. The use of a centralised control unit with sun and wind sensors is recommended for outdoor awnings.
The Veranda has a wide choice of fixing brackets for mounting on any surface.
“Solidarietà e Servizi” offices in Varese
1 BOX CV140 FIXED PART 2 BOX CV140 REMOVABLE PART 3 END CHEEKS CV140 4 ALUMINIUM BRACKET 5 OPPOSITE SIDE END CAP 6 Ø 78 CABLE PULLEY 7 Ø 78 MOTOR BRACKET 8 TUBOLAR MOTOR 30 Nm 9 SQUARE PIN FOR MOTOR 10 MOTOR ADAPTER Ø78 11 MOTOR FIXING BRACKET 12 FABRIC 13 STEEL ROLLER TUBE Ø78 14 MOUNTING BRACKETS TYPE A 15 GUIDE RAIL GVS 16 GUIDE RAIL CAP GVS 17 RIGID Ø 7 mm ROD 18 SLIDING UNIT FOR FV92 19 CABLE TERMINAL 20 SPRING 21 PVC TUBE FOR Ø40 SPRING 22 TRACTION BAR COVER FV92 23 TRACTION BAR FV92 24 CABLE BLOCK WITH SWIVEL 25 “S” HOOK 26 Ø 2.5 mm CABLE
19 18
20
26 21
16
15
Certificate: AK 60015107 Model: VER507
TECHNICAL DATA MODEL OPERATION NOMINAL COUPLE (Min)
VER507
MOTORISED 30 Nm
OPERATING SPEED MAX LIFTING WEIGHT
Galleria Mazzini in Genoa
VOLTAGE ABSORBED CURRENT CE MARKING Constant fabric tension even when mounted horizontally. The maximum surface area that may be covered is 18 m² per module.
USERS & MAINTENANCE MANUAL INSTALLATION SHEETS MAX DIMENSIONS PER MODULE
VER507D
35-40 Nm
11 cm/s max 75 Kg
90 Kg
230 V / 50 Hz 1.1 A CEI 60335-2-97 UNI EN 13561 MT-003 SP-001 Width 450 cm, Height 500 cm max surface area 18 m2
FRAME
ALUMINIUM FRAME Extruded aluminium alloy frame (Al 6060 T5). Standard colours available: white (RAL 9010), brown (RAL 8017) & anodised silver. Other powder coated RAL colours are available upon request.
65
65
143
GVS
®
57
Blind extension (mm)
1 module
2 modules
upto 1750
4
6
1751 - 2750
6
10
2751 - 4000
8
12
4001 - 5000
10
16
FIXING BRACKETS
A level mounting (standard)
B embedded mounting
C lateral mounting with angle plate 60x60x100
D lateral mounting with angle plate 50x100x100
VERANDA System
ST-VER-GB
FV92
92
N° OF BRACKETS
60
161
CV140
E distancing bracket (height 50-200 upon request)
OVERALL DIMENSIONS
2
SINGLE MODULE (VER507) 32,5
W - 65
30
Mounting double module model VER507D
min. distance from ceiling
50
145
300
min
900 max
H
ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 0396846122 Fax +39 0396846140 info@resstende.com www.resstende.com
65
W - 148 W
9
gap between guide and fabric
40-200
38
final position of traction bar
Ø120 max
All dimensions in mm
New lifestyles, new blind systems
FRAME
ALUMINIUM FRAME Frame is in extruded aluminium alloy Al 6060 T5. Standard colours available: white RAL9010, anodised silver, black & bronze. Powder coated RAL colours are available upon request.
28
12 80
23
42
42
®
FG42
G80
104,5 88,50
83
CT90
C90
103
116,5
116,5
CT76
99
99
88
76
CT105
Guided System
C105
143
161
CV140
CT76
C83
C103/CT103
CV140
C150
MAX WIDTH VERTICAL BLIND (cm)
BOX
220
330
500
500
500
MAX WIDTH HORIZONTAL BLIND (cm)
160
160
200
200
200
SP-104
SP-101
SP-105
SP-107
SP-106
INSTALLATION SHEET
OVERALL DIMENSIONS
ST-GR-GB
TYPE R
FG42R
MOUNTING OPTIONS FOR HORIZONTAL MODEL
VERTICAL MODEL 3
50
W 4,5
5
Reverse H
43,5
600 -900*
Standard
Oscurante Filtrante
* Reinforcement rod normally positioned every 600-900 mm
ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND ARCHITECTURE - ROLLER BLINDS AS FURNISHING AND Via Ghiringhella, 74 20864 Agrate Brianza (MB) - Italy Tel +39 0396846122 Fax +39 0396846140 Ph. +39 0396846122 Export info@resstende.com export@resstende.com www.resstende.com
80
3
Possibility of twin fabric upon request 23,5
New lifestyles, new blind systems