79 Trenton Avenue Frenchtown, NJ 08825
www.designplan.com
Tel: (908) 996-7710 Fax: (908) 996-7042
65
ZEFIRO
• Cylindrical bollard light. • Configuration: die-cast aluminum cap, EN AB-47100
•
• • • •
•
alloy (low copper content) and extruded aluminum pole. Polycarbonate diffuser: Transparent and UV-stabilised. Double layer coating for high resistance to corrosion: the aluminum components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminum fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. Protection rating: IP65 In compliance with EN 60598-1 standards Class of insulation: II Installation: the luminaire is equipped with a piece of cable with a 2-way connector for 3-conductor cables for an easy to make connection. We recommend installation on a concrete basement or surface, directly with bolts or through a dedicated fixing plate (to be ordered separately). Outdoor use requires suitable flexible cables. We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
.1 White
.6 Grey .3 Anthracite VERSION: lass A/A+/A++ uminaire supplied ith integrated LED modules at cannot be replaced Bollard Light
Pre-wired with approx 3.94" of cable
Zefiro
.4 Black
.18 Deep Brown
Wall fitting
Protection against impact. IK 07 - 2.00 joule
Zefiro Mid-Power LED / H.7.87in U532002 A A A NATURAL WHITE 4000K MID-POWER LEDs 14W/120-277v Total power 17W lm LED 1937 ≠ lm OUTPUT 1494 CRI >80 +
++
fc 120˚ 90˚
1.02
60˚
2.88
8.45
0
150 cd / 1000 lm
Integral electronic power supply
6.56 0.09
C0 / C180
C90 / C270
-13.12
-6.56
0 ft
6.56
-6.56 13.12
U532003 A A A WARM WHITE 3000K MID-POWER LEDs 14W/120-277V Total power 17W lm LED 1845 ≠ lm OUTPUT 1423 CRI >80 Integral electronic power supply +
++
7.87"
2.83"
Ø 5.91" MID-POWER LED
Zefiro Mid-Power LED / H.23.62in U532005 A A A NATURAL WHITE 4000K MID-POWER LEDs 14W/120-277V Total power 17W lm LED 1937 ≠ lm OUTPUT 1494 CRI >80 +
++
fc 120˚
8.45 2.88
90˚
60˚
6.56 0.09
0
150 cd / 1000 lm
Integral electronic power supply
C0 / C180
C90 / C270
-13.12
-6.56
0 ft
6.56
-6.56 13.12
U532006 A A A WARM WHITE 3000K MID-POWER LEDs 14W/120-277V Total power 17W lm LED 1845 ≠ lm OUTPUT 1423 CRI >80 Integral electronic power supply +
2.83"
Ø 5.91"
23.62"
1.02
++
MID-POWER LED
Zefiro Mid-Power LED / H.39.37in U532008 A A A NATURAL WHITE 4000K MID-POWER LEDs 14W/120-277V Total power 17W lm LED 1937 ≠ lm OUTPUT 1494 CRI >80 Integral electronic power supply +
fc
++
6.56
120˚
1.02
90˚
8.45
2.88 0
8.45 60˚
150 cd / 1000 lm C0 / C180
C90 / C270
-13.12
-6.56
0 ft
6.56
-6.56 13.12
U532009 A A A WARM WHITE 3000K MID-POWER LEDs 14W/120-277V Total power 17W lm LED 1845 ≠ lm OUTPUT 1423 CRI >80 Integral electronic power supply +
39.37"
2.83"
Ø 5.91"
++
MID-POWER LED
Zefiro
Designplan | Ares
Accessories: Zefiro U21 BASE PLATE AND FIXING BOLTS 6.85" x H 7.87"
U185 HIGH RESISTANCE IN-GROUND FIXING BASE
Zefi ro + Code U185 (Code U185 high resistance in-ground fixing base)
6.85"
15.75"
7.87"
Ø 7.09"
Ø 8.66"
acc. code
U21 U185
prod. code
U532002 U532003 U532005 U532006 U532008 U532009
Correct Fixing Method Bollard fixed on plint + suitable installation screws
Correct Fixing Method Bollard fixed on plinth + fixing bolts
Incorrect Fixing Method Do not fix the bollard directly on the ground
Correct Fixing Method
Correct Fixing Method
Incorrect Fixing Method
Bollard fixed on plinth + plug
Bollard fixed on plinth + fixing bolts
Do not fix the bollard directly on the ground
Designplan | Ares
Zefiro