mundays.com.au / 03 5278 5722
WORKSHOP WORKSHOP ESSENTIALS ESSENTIALS ! 3RD EDITION
BIG SAVINGS ON ABRASIVES, LUBRICANTS, CUTTING TOOLS, WORKSHOP EQUIPMENT AND MORE INSIDE!
XDP1000 Soluble Cutting Fluid
Bag Of Rags Cotton 10kg
Part Number: XDP1000 An economical coolant that can be used on a wide range of ferrous or non ferrous metals, when mixed with water it forms a stable milky solution. Extreme Pressure additives have been included to increase tool life in demanding machining operations and produce excellent surface finishes
$
Part Number: 176541 Quality recycled product Clean and safe Cut to convenient size Screened for metal objects
20 90
$19.00 Ex GST
Hustler Riggers Gloves Quality cow grain leather. Winged thumb design for enhanced fit and comfort.Elasticed shirred back. Reinforced stitching
199 00
$
5
$ 28
$180.91 Ex GST
$4.80 Ex GST
Pipe Repair Bandage with Steel Putty
Quick Release Grease Gun Coupler Part Number: A14512 Suitable for high pressure, heavy duty greasing applications. Lock-on and free up both hands to operate your grease gun.Fits all metric and SAE specification grease nipples
Results in a strong, superior pipe repair in only 30mins. No mixing or measuring required. Easy to apply – simply immerse in water for 10secs, then apply. Resistant to most chemicals, acids, oils and fuels. Each pack includes a bandage, 90mm stick of epoxy putty and a pair of gloves.
51 00
$
$46.36 Ex GST Part Number: RAP122 50mm Wide
68 00
$
$61.82 Ex GST Part Number: RAP123 75mm Wide
AVAILABLE IN L , XL AND 2XL
74 00
$
$67.27 Ex GST Part Number: RAP124 100mm Wide
35 00
$
$31.00 Ex GST
mundays.com.au / 03 5278 5722
! BIG DEALS AEROSOLS CRC Brakleen Aerosol 500g
CRC CO Contact Cleaner Aerosol 350g
Part Number: 5089 Formulated to quickly and safely remove brake fluid, grease, oil and other contaminant from brake linings, pads, drums and callipers. Selected solvents, controlled evaporation, low surface tension and high density ensure superior cleaning and degreasing properties and can even lift and remove oil and grease that has already penetrated linings.
Part Number: 2016 A unique, plastic safe, scientifically formulated, technically proven, stable, inert high purity cleaning solvent. Non-corrosive, non-staining, rapid complete evaporation and contains no lubricants. Contains COZOL – a special proprietary blend of solvents which enhances the cleaning power without damaging plastics.
12
$
67
CLEANS WITHOUT DISASSEMBLY
24 40
$
LEAVES NO RESIDUE
$22.21 Ex GST
$11.51 Ex GST
CRC TAC2 Adhesive Lubricant Aerosol 300g Part Number: 5035 CRC TAC2 is an exceptional lubricant, with a tough adhesive quality, which will bond to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that cause metal fatigue.
15 89
$
$14.44 Ex GST
FOR CHAINS, BEARINGS AND SLIDING PARTS
CRC 2.26 Electrical Multipurpose Aerosol 450g Part Number: 2005 A stable, inert organic formula, especially prepared to prevent malfunction and deterioration due to the effect of moisture and corrosion, extends operational life, reduces down time and maintenance. It displaces water and moisture, seals hard surfaces with a continuous molecular film and never becomes dry, hard or brittle.
16 26
$
IMPROVES ELECTRICAL PROPERTIES
$14.79 Ex GST
CRC 808 Silicone Aerosol 330g
CRC Lectra-Clean Aerosol 400g
Part Number: 3055 A non-corrosive formula that provides a thin, durable, clear, odourless film that lubricates, protects and eliminates squeaking and binding caused by friction. CRC 808 Silicone Spray is an excellent mould release.
Part Number: 2018 A unique, scientifically formulated cleaner/degreaser that is effective in most heavy duty applications. It dissolves grease, oil and sludge quickly for more efficient operation of mechanical equipment CRC LECTRA-CLEAN is non-flammable.
16 78
$
$31.45 Ex GST
CLEAR MULTI-PURPOSE ENHANCER
3145
$
ELECTRICAL EQUIPMENT CLEANER
$28.59 Ex GST
CRC 5-56 Multipurpose Lubricant A multi-purpose product with superior penetrating power that breaks through rust and corrosion while it clears away scale and dirt. Eliminates the need for many disassembly operations. Lubricates for smooth action, and silences annoying squeaks and squeals. Protects metals against corrosion and displaces moisture to help start wet engines. PENETRANT AND LUBRICANT
4 Litre
39
$
00
$35.45 Ex GST Part Number: 5004
20 Litre
147 00
$
$133.64 Ex GST Part Number: 5009
mundays.com.au / 03 5278 5722
! BIG DEALS QUICK SMART D’Grease It No 2 Degreaser 25 Litre
Super Solve Degreaser 25 Litre Part Number: DS25
Part Number: DW25
Super Solve Degreaser is a low viscosity emulsifiable solvent which is designed for the fast and efficient degreasing of motors, motor parts, chassis and metals. Super Solve is also a highly effective cleaner for garage floors. Super Solve works by penetrating and lifting oil and grease and when rinsed off with water, the oil and grease is emulsified and flushes away with rinsing water. Suitable for metallic and most non-metallic hard surfaces.
D’Grease It No 2 is a water based degreaser for quick and efficient degreasing and general cleaning in industrial, automotive and marine use. It swiftly removes stubborn oils greases and soils from engines, metal parts, tools, driveways, walls, trucks and trailers.
73 00
$
140 00
$
$66.36 Ex GST
$127.27 Ex GST
Air Tool Oil 5 Litre
Compressor Oil 5 Litre
Part Number: AT05
Part Number: CO5
Quick Smart Air Tool Oil offers the correct lubrication for most types of air tools. The oil offers corrosion protection and resists wash action due to action of wet air. This long lasting, super slick product allows air tools to run easier and last much longer. It is a complex blend of pure petroleum oils and additives especially formulated to combat rust and varnish for the working professional.
Compressor Oil – ISO Grade 68 is a premium mineral oil for the lubrication of all piston compressors, air compressors including rotary screw, reciprocating and certain types of rotary vane compressors.
37 00
$
37 00
$
$33.64 Ex GST
$33.64 Ex GST
Liquid Parts Wash Non-Flammable
Liquid Parts Wash – Flammable
Part Number: NFPW25
Part Number: LPW25
Our Non-Flammable Parts Washing solvent is a clear, colorless liquid hydrocarbon solvent, immiscible with water specially designed for use in a 90 litre bench top parts washing unit. Non-flammable 62°C flash point.
Our liquid parts wash is a clear, colorless liquid hydrocarbon cleaning solvent, immiscible with water. It is recommended for the large industrial parts washing units which sit on top of a 150 litre drum. The solvent is flammable 36°C flash point. It is a stronger solvent than our non-flammable solvent. It will remove any petroleum grime from engine parts, bearings, brakes etc and is a fast drying solvent.
121 00
$
$110.00 Ex GST
126 00
$
$114.55 Ex GST
Waterless Hand Cleaner Our Quick Smart Waterless Hand Cleaner is a heavy duty solvent based gel hand cleaner developed to remove a wide range of industrial soils, oil, grease, grime, printing ink, oil based paints etc. It cleans gently and thoroughly with or without water. Contains lanolin to help condition hands against cracking, soreness, dryness and irritation.
Orange Power Hand Cleaner 3.5kg
29
$
45
$26.77 Ex GST Part Number: QS3-5
19kg
117
$
00
$106.36 Ex GST Part Number: QS19
Part Number: OBP19 Orange Power Hand Cleaner with fine polybeads is a stiff hand cleaner containing lanolin and citrus oils. Orange Power removes the toughest grime, oil, paint, ink, silicone’s, metal stains and more.
130 00
$
$118.18 Ex GST
mundays.com.au / 03 5278 5722
DRIVING YOUR
SUCCESS SEW-EURODRIVE is a global designer, developer and manufacturer of mechanical power transmission systems and motor control electronics. Its comprehensive range of integrated solutions includes: geared motors and gear units, high torque industrial gear units, high-efficiency motors, electronic frequency inverters and servo drive technology, decentralised drive systems, plus complete engineered solutions and after-sales technical support/training.
"WBJMBCMF GSPN ZPVS BVUIPSJTFE 4&8 &630%3*7& EJTUSJCVUPS %FT .VOEBZ 4PO #BDLXFMM 4USFFU ] /PSUI (FFMPOH ] 7JDUPSJB 1IPOF ] 'BY ] 8FC XXX NVOEBZT DPN BV
! BIG DEALS MAPRO Bearing Fitting Tool Kit
Hook Spanner Set 9 Piece Part Number: HN4-16/SET
Part Number: TMFT36
Contains 9 spanners suitable for tightening and loosening lock nut sizes 4 up to 16. Easy selection of the right size spanner. Packed in a sturdy carrying case
Facilitates the mounting of bearings with bore diameters from 10–55 mm The impact rings are suitable for use under a press The nylon double-side head of the dead-blow hammer helps to prevent damaging the components
620 00
$
$563.64 Ex GST
289 00
$
$262.73 Ex GST
MADE OF HIGH IMPACT RESISTANT MATERIAL
Induction Heater Part Number: TIH030M/230V Compact lightweight design weighing only 20.9kg 2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption Capable of heating a 28 kg bearing in just 20 minutes Temperature mode pre-set at 110 °C to help prevent bearing over-heating
3115 00
Ball Bearing Puller Kit Part Number: TMMD100
Designed to allow easy and quick dismounting of deep groove ball bearings with interference fit on both rings. Contains six sets of different size puller arms, two spindles and one handle packed in a carrying case. Suitable for dismounting up to 71 different SKF deep groove ball bearings from shaft diameter ranging between 10 and 100 mm
989 00
$
$
$2831.82 Ex GST
$899.09 Ex GST
Infrared Thermometer
Pre-Cut Machinery Shim Kits
Part Number: TKTL10 Maximum temperature always shown; helps identify the real hotspots Auto shut off feature; helps optimise battery life Colour display with temperature trend indication Temperature range using infrared: –60 to +625 °C
149 00
$
DISTANCE TO SPOT SIZE: 16:1
$135.00 Ex GST
Made of high quality stainless steel. Close tolerances for accurate alignment. Thickness clearly marked on each shim. Fully de-burred
460 00
$
$418.18 Ex GST TMAS50/KIT: 50x50mm
Digital Tachometer Part Number: TKRT10
Fast and accurate tachometer utilizing laser or contact to measure rotational and linear speeds. Equipped with a laser and a range of contact adapters to suit many different applications. Wide speed measurement range: up to 99 999 r/min for laser measurement and 20 000 r/min using contact adapters
299 00
$
$271.81 Ex GST
SUITABLE FOR USE IN BOTH BLIND HOUSINGS AND SHAFT APPLICATIONS
EASY TO FIT AND TO REMOVE
665 00 $890 00
$
$604.54 Ex GST TMAS75/KIT: 75x75mm
$809.09 Ex GST TMAS50/KIT: 100x100mm
EasyPull Mechanical Puller Unique red rings spring-operated opening mechanism allows the EasyPull to be placed behind the component with one movement of the hands.Self-locking arms help prevent the risk of puller slipping under load. Double hexagonal heads allow easier application of withdrawal force
490 00
$
$445.45 Ex GST Part Number: TMMA60
SELF-CENTRING CAPABILITY AND NOSEPIECE HELP TO AVOID DAMAGE TO SHAFT
615 00
$
$559.09 Ex GST Part Number: TMMA80
865 00
$
$786.36 Ex GST Part Number: TMMA120
mundays.com.au / 03 5278 5722
! BIG DEALS CUTTING TOOLS Drill Set HSS 25 Piece
Step Drill Set Metric 3 Piece
2003-M3: Metric 2000-F3: Imperial
Part Number: 2600-S1 Designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials. Manufactured from premium quality high speed steel with double fluted ground cutting edge for long service life.
Premium quality M2 HSS for strength and durability. 118º split point is self centering and reduces drill bit wander.
137 50
$
BLACK FINISH PROVIDES INCREASED PERFORMANCE
$125.00 Ex GST
$183.06 Ex GST
Countersink Set 5 Piece
Screw Extractor Set 10 Piece
Part Number: 3843-S
Part Number: 9900-SM2
For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. Made from 100% M35 Cobalt High Speed Steel which offers increased wear and heat resistance.
Chrome alloy screw extractors in sizes 1 to 5. Matching left hand HSS-Co5 Cobalt drills.
60 50
$
20137
$
WITH MATCHING LEFT HAND DRILLS
$55.00 Ex GST
299 00
$
$271.88 Ex GST
HSS Annular Cutter Set 7 Piece
UNC Tap and Die Set HSS 32 Piece
Part Number: 7400-S1X25
Part Number: ETDS38
Achieve burr-free finished holes without the need for pre-drilling or step drilling. CNC ground and feature multi-cut geometry for smooth and fast cutting. Precision ground flutes run the entire length of the cutter providing efficient chip removal.
Includes 9 button dies, 18 taps and 5 tap wrenches. Sizes range from 1/4” to 1” UNC Supplied in a high quality wooden box with foam inserts
1635 00
$
225 00
$
$1,486.36 Ex GST
MADE FROM HIGH-QUALITY HIGH SPEED STEEL
$204.55 Ex GST
Quick Change Ratchet Tap Wrench
Reduced Shank Drill Kit 4 Piece
Part Number: 4996-1/2QC
2654-S1: Metric 2651-S1: Imperial
Heavy duty ratchet mechanism. Suits metric sizes M2-M12 and imperial sizes 5G-1/2”. Includes 65mm extension
79 20
$
$72.00 Ex GST
SUPPLIED WITH TWO CHUCKS
118º notched point provides faster starting and reduced drill wander 1/2” reduced shank
176 00
$
$160.00 Ex GST
mundays.com.au / 03 5278 5722
! BIG DEALS PAINTS & MARKING Cold Galvanising Coating Aerosol 400g
Spray & Mark Paint Aerosol 350g
Part Number: 180091
184358: Yellow 184359: White
A zinc-rich high performance heavy duty corrosion inhibitive primer. Used extensively in metal fabrication. Provides superior galvanic protection to new weld joints.
High opacity, high quality, true colour pigment loading. Applications include construction, landscaping, civil works and surveying. Unique spray pattern specifically designed for spot marking as well as “writing� applications.
14 95
$
7
$ 99
$13.69 Ex GST
$7.26 Ex GST
Silver Zinc Aerosol 400g
Line Marking Paint Aerosol 500g
Part Number: 181257
184360: Yellow 184361: White
Fast drying, dual-action anti-corrosive primer and top coat. Provides excellent adhesion, corrosion resistance and long lasting durability to metal surfaces.
1180
$
A fast drying acrylic paint. Specially formulated to provide long lasting lines. Ideal for marking out car parks, factories, warehouses, sporting fields and courts.
12 78
$
98.5% ZINC PURITY
$10.73 Ex GST
$11.62 Ex GST
Zinc Guard Epoxy Enamel Aerosol 325g High build self priming top coat. Advanced zinc anti-corrosive formula for industrial use. Provides a durable, long lasting finish. Greater UV resistance.
14 97
$
EXCEPTIONAL GLOSS LEVELS
$13.60 Ex GST
Flawchek Crack Detection Kit Part Number: 180437 Dye penetration visible inspection system that detects cracks and flaws in metals and casting. 4-step system - Preclean, Penetrant, Remover and Developer. Fast, efficient and cost effective method.
49 00
Signal Red 179908
Golden Yellow Cottage Green 179910 179906
Deep Ocean 179905
Aluminium 179907
Gloss White 179909
Flat Black 179904
Zinc Guard Quick Dry Enamel Aerosol 325g
Quick dry. Advanced zinc anticorrosive formula for industrial use. Provides a durable, long lasting finish. Greater UV resistance. Exceptional gloss levels.
11 00
$
$
$44.54 Ex GST
$10.00 Ex GST
Golden Yellow Y14 181050
Flat Black 182557
Gloss White 180784
mundays.com.au / 03 5278 5722
! BIG DEALS ACCUD Vernier Caliper
Digital Caliper
Range: 0-150 mm Graduations: 0.05 mm/0.001’’ Stain chrome plated reading surface
0-150mm/0-6”
59
$
0-200mm/0-8”
89
00
$
$53.63 Ex GST
Part Number: AC-120-006-12
Coolant Proof Digital Caliper IP67
85
$
$80.90 Ex GST
Range: 0-150 mm/0-6’’ IP67 protection level Absolute measuring system Functions: zero point, mm/inch Calibration certificate is included
240
0-150mm/0-6”
00
00
$218.18 Ex GST
Part Number: AC-112-006-12
0-200mm/0-8”
275 00
$
$250.00 Ex GST
Part Number: AC-112-008-12
0-200mm/0-8”
125 00
00
$
$77.27 Ex GST
Part Number: AC-120-008-12
0-150mm/0-6”
$
Range: 0-150 mm/0-6’’ Functions: zero point, mm/inch USB data output Made of stainless steel Calibration certificate is included
$113.63 Ex GST
Part Number: AC-111-006-12
Part Number: AC-111-008-12
Dial Indicator w/ Magnetic Stand AC-280-000-02: Metric AC-280-001-02: Imperial Range: 10 mm Stem hole: 8mm, 4mm & 3/8” Height: 231 mm Arm length: 165 mm Magnetic Force: 60 kgf
145 00
$
$131.82 Ex GST
! BIG DEALS SUPRABEAM Q1 Mini Suprabeam Torch 80 Lumen
Q7XR Suprabeam Torch 320 Lumen
Part Number: SBQ1MINI
Part Number: SBQ7XR
The Q1mini is equipped with our versatile Hyperfocus system and the latest LED Power-Chip technology, producing up to 5 hours of light while using just 1xAAA battery and only weighs 38 grams. Perfect for use as a keyring, providing security and convenience or for the technician s pocket.
The most technologically advanced rechargeable torch in Suprabeam history. We created a torch that pushes the boundaries of light. The reflector is machined out of massive aluminium, designed to give you a minimum loss of light. Together with the Thermal Management Heat-sink the Q7xr will perform with a maximum light output till the battery is drained completely.
45 00
259 00
$
$
$40.90 Ex GST
$235.45 Ex GST
Q3 Suprabeam Torch, 320 Lumen Part Number: SBQ3
The compact and powerful Q3 delivers an impressive 320 lumens with only 3 x AAA batteries, and will last up to 60 hours on low light setting. Perfect for the professional user or enthusiast, who needs a torch with a powerful output with just one click Ideal for both long range and inspection viewing.
89 00
$
$80.90 Ex GST
V3 Air Suprabeam Head Torch 250 Lumen Part Number: SBV3AIR
An essential companion on the pursuit of adventure, that offers best power to cost ratio. Designed with freedom and weightlessness in mind, to ensure maximum comfort and easy operation. The headlamp is equipped with a minimized battery pack containing 3 x AAA batteries, but keeping a fully electronic control system, durable switch and proven efficiency on the light curve.
79 00
$
$71.82 Ex GST
mundays.com.au / 03 5278 5722
! BIG DEALS ALEMLUBE Air Operated 20kg Grease Kit
Oil Transfer Kit with Oil Meter
Part Number: 424170
Part Number: 454110N
Integral filter protects pump from foreign particle contamination. 55:1 ratio air motor develops grease pressures up to 7,950psi. Will handle high density, tacky greases up to NLGI2. Covered by a unique two year warranty. Quiet operation due to exhaust muffler. Cast alloy dual cylinder air motor guarantees a long service life. Ideal for busy workshops where greasing is undertaken all day, every day
Maximum pump free flow rate of 35 L/min Flow rates with hose and metered gun (365534) of up to 12 L/min One piece die-cast cylinder eliminates leaks & simplifies repairs Maximum fluid outlet pressure of 420psi Air pressure operating range from 20psi to 140psi Air consumption 180 NL/min (6.4 cfm) Air inlet: 1/4″BSP(f) Fluid outlet: 1/2 “BSP(f) Noise level: 80dB
$1,100.00 Ex GST
$1,400.00 Ex GST
20V Lithium-ion Cordless Grease Gun 450gm
Lever Action Drum Pump
Part Number: 670AN5
Part Number: 304600
Delivery rates of up to 170 g/min. Up to 15 cartridges per battery charge. LCD for real time battery capacity, grease level and grease metering. Three way loading: 450g cartridge, bulk grease or filler pump. LED light with on/off control. Impact resistant LCD lens surrounded by impact absorbing bezel. Shape, weight and balance designed for less physical strain
Delivers approximately 0.45L per stroke. Telescopic downtube makes the pump suitable for 60L and 205L drums. Includes a delivery hose and outlet spout facilitates quicker, easy and contaminent free lubricant transfer. Suitable for the transfer of light to medium viscosity lubricants
1210 00
$
1250 00
$
1540 00
$
125 00
$
$113.63 Ex GST
$1136.36 Ex GST
Oil Drum Pump 20 Litre Part Number: 8828N2 Capable of delivering up to 110ml per stroke. Ideal pump for the transfer of engine gear, diff and hydraulic oils in busy vehicle servicing workshops. Incorporates a filter in the drain back holster to protect against foreign particle contamination. UV stabilised long life hose ensures a long service life.
65
$
00
12V Self Priming Diesel Fuel Pump Part Number: 52040 Flow rates of up to 50L/min. Self priming electric vane pump. 12V DC electric motor. Cast iron body. Fixed brush motor with permanent magnet stator. Up to 2m suction capacity
479 00
$
$435.45 Ex GST
$59.09 Ex GST
Diesel Storage & Dispensing Kit Part Number: L20040PA 200L storage tank capacity. Heavy duty polyethylene tank. Recessed pump improves overall tank strength. 4m long antistatic delivery hose. Lockable and secure. 12V diesel fuel pump up to 50L/min
1125 00
$
$1022.72 Ex GST
205L/180kg Drum Dolly Part Number: 80100 Provides a convenient and easy means of moving 205L drums. Industrial quality steel construction. Can convert an empty drum into a mobile container. Easy for one person to use. Includes 4 heavy duty 75mm castors. Occupational Health & Safety friendly
140 00
$
$127.27 Ex GST
mundays.com.au / 03 5278 5722
IMI Norgren Guardian Range Exceptional quality & reliability at an attractive price
IN STOCK!
Proven IMI Norgren quality
Flexible options & accessories Reliable, simple & easy to install Actuators PCA/702 Series ISO Standard Cylinder
About IMI Norgren Guardian Attractively priced and readily available from stock, the IMI Norgren Guardian range is suitable for a wide range of industrial applications. It comes with the high standard of service and support you would expect from IMI Precision Engineering.
Solenoid Valves CM/71 Series Compact Cylinder
VCB22 Series Solenoid Valve
VCB10 Series Solenoid Valve
Air Preparation Filter F49G
Regulator R49G
Combination unit C49G
Filter-regulator lubricator BL49
Find out more Visit: www.imi-precision.com
Lubricator L49C
Filter-regulator B49G
! BIG DEALS ABRASIVES 1mm INOX Cutting Wheels
Grinding Discs
An all-round thin high-performance cutting-off wheel from Klingspor Optimized bonding provides for a significantly longer service life
With optimized recipe for use on steel Also suitable for use on stainless steel
105x1x16
115x1x22
2
2
$ 51
$ 72
$2.28 Ex GST
$2.47 Ex GST
Part Number: 326432
Part Number: 322180
125x1x22
3
$ 02 $2.75T Ex Part Number: 322181
100x6x16
115x6x22
2
2
$ 63
$ 96
$1.92 Ex GST
$2.39 Ex GST
$2.69 Ex GST
Part Number: 6578
Part Number: 13401
Part Number: 13402
Zirconia Linishing Belts
Maximum removal rate and service life Especially suitable for rough work on steel and stainless steel Optimal removal rate when used on high-power angle grinders under increased grinding pressure
Aggressive abrasive behaviour Cool grinding and increased grinding performance on stainless steel and high-alloy steels Very long service life also when used for grinding of non-ferrus metals
12
$
125x22 60G
12
$
07
$10.97 Ex GST
07
$10.97 Ex GST
Part Number: 321704
Part Number: 321707
12
$
3
50x915 120G
6
$ 70 $6.09 Ex GST
Part Number: 182456
Non-Woven Mop Discs 278498: 125x22 Brown Coarse 278500: 125x22 Green V/Fine 278499: 125x22 Maroon Medium
Green G/Purpose
3
$ 69
Brown Coarse
8
$ 37
$3.35 Ex GST
$7.61 Ex GST
Part Number: 258865
Part Number: 258862
High quality non-woven mop disc for stainless steel finish work Optimal results when used on variable speed angle grinders
25 28
$
$22.98 Ex GST
Quick Change Discs
Ceramic Fibre Discs
For light deburring and removal of rust and paint Long life due to hard, stable quality of non-woven web material
Premium product with excellent performance for working on steel High aggressiveness thanks to self-sharpening, aggressive ceramic grains throughout the service life Advanced coating technology (ACT) for extraordinary grain adhesion and extended service life
2
Part Number: 182455
$10.97 Ex GST
$3.40 Ex GST
$ 21
$6.62 Ex GST
Part Number: 321709
Part Number: 258866
50mm Blue V/Fine
7
$ 28
07
Outstanding for surface finishing, e.g. adaptation to an existing surface scratch pattern Size 152mm x 229mm
$ 74
50x915 60G
125x22 80G
Non-Woven Web Pads Maroon V/Fine
2
$ 11
Zirconia Flap Discs
125x22 40G
125x6x22
50mm Maroon Medium
2
$ 54
50mm Brown Coarse
2
$ 40
$2.01 Ex GST
$2.31 Ex GST
$2.18 Ex GST
Part Number: 295415
Part Number: 295414
Part Number: 295413
125x22 36G
2
125x22 60G
2
$ 54
$ 00
$2.31 Ex GST
$1.82 Ex GST
Part Number: 330485
Part Number: 330487
mundays.com.au / 03 5278 5722
! BIG DEALS SAFETY Sabre Safety Glasses Light weight rimless safety spectacle. Built-in brow and lateral guard provide extra front and side protection. Soft nose bridge and temples for non-slip fitting and pressure dispersion. Anti-scratch and anti-fog coated lens. 99.9% UV protection.
57
$
Aurora Safety Glasses
BOX OF 1 0
3SC9217: Clear
$14.77 Ex GST
3SS9217: Smoke
Polycarbonate lens. Lightweight and comfortable sunglass style with black nylon frame. 99.9% UV protection. Scratch resistant lens coating.
12
$
3SS012: Smoke
P1 Disposable Respirators Box 20
10
3SS2575
P2V Disposable Respirators Box 10 Part Number: 4SAD036 Suitable for dust, mist and fumes. Low breathing resistance. Adjustable nose bridge and soft foam nose piece. Elasticised dual straps for a firm comfortable fit. Valved.
17
Part Number: 4SAD031 Polarised
39 90
$
$36.27 Ex GST
$11.00 Ex GST
$
3SC012: Clear
16 25
Vega Safety Glasses
Smoke
Wrap around polycarbonate lens. Lightweight sporty and compact design. 99.9% UV protection. Scratch resitant lens coating. Lens curved for close eye fit and no distortion.
$
50
$52.27 Ex GST
BOX OF 1 0
60
3SP2575
Suitable for dust and mist. Low breathing resistance. Adjustable nose bridge and soft foam nose piece. Elasticised dual straps for a firm comfortable fit.
19 80
$
$18.00 Ex GST
Hustler Riggers Gloves Quality cow grain leather. Winged thumb design for enhanced fit and comfort.Elasticed shirred back. Reinforced stitching
5
$ 28 $4.80 Ex GST
AVAILABLE IN L , XL AND 2XL
$16.00 Ex GST
Blue Forge Leather Welders Gloves Part Number: 5LW208 Durable black chrome leather. 40cm long fully cotton lined. Reinforced palm and thumb. Knuckle bar. KevlarÂŽ stitching.
7
$ 00 $6.36 Ex GST
Single Dipped Red PVC Gloves Chemical resistant. PVC dipped cotton interlock liner 27cm Long
2
45cm Long
4
$ 42
$ 62
$2.20 Ex GST
$4.20 Ex GST
5P328
5P331
mundays.com.au / 03 5278 5722
! BIG DEALS OILS ENI OSO Hydraulic Oils 20 Litre Eni OSO is a high performance antiwear hydraulic oil, specifically designed to meet the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers. It’s formulated with selected base oils treated with “low zinc” technology ensuring excellent antiwear, antirust and antioxidant properties.
99
$
00
$90.00 Ex GST
AVAILABLE IN ISO VG 32, 46 AND 68
ENI Blasia EP Gear Oils 20 Litre Eni Blasia is a gear oil with EP characteristics for enclosed industrial gears lubricated with splash or circulation systems especially where high loads and temperatures, high speeds and sliding friction is present. It can be also used to lubricate other heavily-loaded components such as couplings, transmission screws and low speed plain bearings.
135
$
00
$122.73 Ex GST
AVAILABLE IN ISO VG 150, 220, 320 AND 460
ENI Exidia HG Slideway Oils 20 Litre Eni Exidia HG is a premium quality lubricant especially designed for slideways, even under high loads, with circulation and total loss lubrication systems. It is recommended as hydraulic fluid in machines, especially grinding machines, where a single oil is used for guides and hydraulic drives lubrication.
160 00
$
AVAILABLE IN ISO VG 68 AND 220
$145.45 Ex GST
ENI Arnica HVI Hydraulic Oils 20 Litre Eni Arnica is a high performance antiwear hydraulic oil, specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems. It’s is recommended for outdoor equipment which are likely to operate in wide temperature range, such as systems where cold start-up and high operating temperatures are typical.
145 00
$
$131.81 Ex GST
AVAILABLE IN ISO VG 46 AND 68
ENI Dicrea Compressor Oils 20 Litre Eni Dicrea is a lubricant for reciprocating air compressors that can be used even in case of very high air delivery temperatures (more than 200°C). It is formulated from selected paraffinic base stocks treated with antioxidant antirust and antiwear additives.
165 00
$
$150.00 Ex GST
AVAILABLE IN ISO VG 46, 68 AND 100
ENI MU EP2 Lithium Grease 18kg Part Number: 184146
Eni Grease MU EP 2 is a ‘multipurpose’ lithium grease, homogeneous smooth-textured in appareance with a specific additive EP (Extreme Pressures). Suitable for the lubrication of flat and rolling bearings, also loaded, operating at high temperatures and in couplings with particularly critical start-up lubrication conditions. The ‘multipurpose’ characteristics make it suitable for lubricating gears and other components subjected to vibrations and operating at high temperatures.
295 00
$
$268.18 Ex GST
ENI SM2 Black Moly Grease 18kg Part Number: 184147 Eni Grease SM 2 is an EP grease, smooth-textured and black in color, with mineral oil based and lithium. The presence in the grease of extremely pure molybdenum disulphide assure long re-greasing intervals when this kind of operation is impossible or must be delayed. It adheres firmly to metal surfaces, filling the micro cavities thanks to its excellent adhesion properties. The resistance to water washout and the anticorrosive properties make the greases suitable for application exposed to wet environment and in presence of water.
380 00
ENI Antifreeze Plus Concentrated Coolant 20 Litre Part Number: 184168 Eni Antifreeze Plus is an amine, phosphate and nitrite free and concentrated engine coolant based on ethylene glycol. The product protects all parts of cooling system from frost, oxidation and overheating.
169 00
$
$
$345.45 Ex GST
$153.64 Ex GST
mundays.com.au / 03 5278 5722
! BIG DEALS OILS ENI i-Sigma 15W40 CJ-4 Engine Oil 20 Litre
ENI RotraMP 80W/90 Gear Oil 20 Litre
Part Number: 184152
Part Number: 184136
Eni i-Sigma top MS is a multigrade oil suitable for use in recent models of heavy duty diesel vehicles, designed to operate with ultra low sulphur diesel and equipped with after-treatment devices, also under severe operating conditions. It allows extended oil drain intervals according to engine manufacturers’ requirements.
130 00
$
$118.18 Ex GST
Eni Rotra 80W-90 is a mineral-based, high VI gearbox lubricant, with a specific antiwear additivation. It is designed for the lubrication of some types of integrated transmissions (transaxle) without hypoid gears (for instance, front-wheel drive vehicles with transverse engines). It can be used in all gear trains where power transfer does not entail excessive pressures or tooth load, for which the manufacturer prescribes a lubricant with an API GL-3 performance level for antiwear properties.
135 00
$
$122.72 Ex GST
ENI i-Sigma 15W40 CI-4 Engine Oil 20 Litre Part Number: 184154
Eni i-Sigma performance E7 15W-40 is an engine lubricant formulated with high quality base oils, developed for turbocharged diesel engines operating even under severe duty. The product can also be used in diesel engines of previous generation and in engines of commercial vehicles on urban and long-distance service.
99 00
$
$90.00 Ex GST
ENI RotraMP 85W/140 Gear Oil 20 Litre Part Number: 184137
Eni Rotra 85W-140 is a mineral-based, high VI gearbox lubricant, with a specific antiwear additivation. It is designed for the lubrication of some types of integrated transmissions (transaxle) without hypoid gears (for instance, front-wheel drive vehicles with transverse engines). It can be used in all gear trains where power transfer does not entail excessive pressures or tooth load, for which the manufacturer prescribes a lubricant with an API GL-3 performance level for antiwear properties.
135 00
$
$122.72 Ex GST
ENI RotraLSX 75W/90 Gear Oil 20 Litre Part Number: 184138
Eni Rotra LSX 75W-90 is a special top sythetic lubricant for manual gearboxes requiring an API GL-4 or GL-5 level of performance. It has especially formulated for the lubrication of both gearboxes and differentials in modern vehicles. It is also suitable for the lubrication of gearboxes in outboard engines and sterndrive systems.
425
$
00
ENI Multitech CT 30 Oil 20 Litre Part Number: 184140
Eni Multitech CT 30 is a special lubricant to be used in CATERPILLAR machines. It is suitable for lubrication of transmissions, propulsion systems, differentials, winches, clutches, gears and bearings.
145 00
$
$131.82 Ex GST
$386.36 Ex GST
ENI Multitech CT 50 Oil 20 Litre
ENI Multitech JD/F 10W30 Oil 20 Litre
Part Number: 184141 Eni Multitech CT 50 is a special lubricant to be used in CATERPILLAR machines. It is suitable for lubrication of transmissions, propulsion systems, differentials, winches, clutches, gears and bearings.
Part Number: 184144 Eni Multitech JD/F 10W-30 is a multifunctional lubricant (UTTO) that complies with the John Deere JDM J20C specification, suitable for lubricating devices that are fitted in machines used in the agricultural sector such as tractors. Its characteristics makes it suitable for lubrication of transmissions, hydraulic systems, power take-offs, immersed oil brakes and clutches, end gear reducers and differentials.
145 00
$
$131.82 Ex GST
135 00
$
$122.72 Ex GST
mundays.com.au / 03 5278 5722
! BIG DEALS WORKSHOP Scissor Lift Table 200kg
Pallet Jack Part Number: PJR001 High-quality hydraulics Strong, reinforced steel construction Easy to use release lever DESIGNED SPECIFICALLY FOR AUSTRALIAN HARDWOOD PALLETS
484 00
$
Part Number: SLR001 Table size 700 x 450mm Max Table Height 780mm Min Table Height 265mm
407 00
$
$440.00 Ex GST
$370.00 Ex GST
Super Ultraflex PVC Hose
2 HP 10 CFM Piston Compressor
Abrasion resistant
Part Number: T200S1 Traditional cast iron quality. Designed and produced for optimum performance and reliability. Each compressor is tested tocomply with rigid standards ensuring supreme quality.
Kink Resistant Low temperature flexibility Working pressure 290psi 10mm x 20 Metre
43
$
AUSTRALIA MADE
12mm x 20 Metres
54 00
00 $
$39.09 Ex GST 201654-020
$49.09 Ex GST 201656-020
1017 00
$
$924.55 Ex GST
Airboy Air Blow Gun
Rubber-Lined Clamp Pack
Part Number: 109203 Durable and strong Ergonomically correct design Combines maximum air flow with a low level of noise
Part Number: TRLC90K Contains 10 different size rubber-lined zinc plated clamps
$
$
$17.41 Ex GST
$80.91 Ex GST
19 16
89 00
All prices include GST and are valid till the 30th of November 2019 and while stocks last. Some products may not be available in store and are subject to availability and freight were applicable. Des Munday & Son reserves the right to correct printing errors and omissions. Accessories shown with product are not included unless specified. Des Munday & Son Pty Ltd 6 Backwell Street, North Geelong 3215 Phone 03 5278 5722 Email sales@mundays.com.au www.mundays.com.au
mundays.com.au / 03 5278 5722