eMT3070A Human M achine Interface with 7" TFT Display Feature Display Resolution 2 Brightness (cd/m ) Display Contrast Ratio Backlight Type Backlight Life Time Colors Type Touch Panel Accuracy Flash Memory RAM
Aluminum enclosure greatly improves the reliability. 7" 800 x 480 TFT LCD, LED Backlight Fan-less Cooling System Built- in 256 MB Flash Memory and RTC SD Card Slot for Extension of Storage One USB Host and One USB Client Port COM1 and COM3 RS-485 & CAN Bus Built-in Isolation COM1 and COM3 RS-485 2W supports MPI 187.5K, please use one at one time CAN Bus port supports CANopen Protocol Built-in Power Isolator NEMA4 / IP66 Compliant Front Panel
7” TFT 800 x 480 500 500:1 LED >30,000 hrs. 16.7M 4-wire Resistive Type Active Area Length(X)±2%, Width(Y)±2% 256 MB 256 MB Processor 32 bit RISC CPU 600MHz SD Card Slot SD/SDHC USB Host USB 2.0 x 1 USB Client USB 2.0 x 1 Ethernet 10/100 Base-T x 1 COM1: RS-232/RS-485 2W/4W COM Port COM3: RS-232/RS-485 2W* I/O Port RS-485 Dual Isolation Yes CAN Bus Yes HDMI N/A Audio Output Audio Line Out - 3.5 mm jack x 1 Video Input N/A RTC Built-in Input Power 24±20%VDC Power Isolation Built-in Power Consumption 400m A@24VDC Power 500VAC (1 min.) Voltage Resistance Exceed 50M at 500VDC Isolation Resistance Vibration Endurance 10 to 25Hz (X, Y, Z direction 2G 30 minutes) PCB Coating Yes Enclosure Aluminum Dimensions WxHxD 200.3 x 146.3 x 42.5 mm Specification Panel Cutout 192 x 138 mm Weight Approx. 0.9 kg Mount Panel mount Protection Structure NEMA4 / IP66 Compliant Front Panel Storage Temperature -20° ~ 70°C (-4° ~ 158°F) Environment Operating Temperature -20° ~ 50°C (-4° ~ 122°F) Relative Humidity 10% ~ 90% (non-condensing) CE marked Certificate CE UL cULus Listed Software EasyBuilder Pro *Note: COM1 RS-232 RTS/CTS and COM3 RS-232 cannot be used simultaneously.
英文版
eMT3070A Top View
146,35 [5,762]
200,35 [7,888]
Side View
Front View
Side View
190,00 [7,480]
192,00 [7,559]
138,00 [5,433]
136,00 [5,354]
a
b c
192mm [7.559"] W x 138mm [5.433"] H
24VDC FG
SD
Rear View
f
g
h i j
42,55 [1,675]
d e
Cutout Dimensions
Bottom View
Ordering Information a
f
COM1 RS-485, COM3 RS-485, CAN Bus COM1 RS-232, COM3 RS-232 Ethernet Port USB Host Port USB Client Port
DIP SW b c d e
Fuse
g
Power Connector Line Out SD Card Slot
h i j
Pin Assignment: COM1 / COM3 [RS232] 9 Pin, Male, D-sub COM1 [RS232]
COM3 [RS232]
eMT3070A: 7" TFT LCD HMI, 256 MB flash memory / 256 MB RAM on board FLZ485000 Multi-Connector cable COM1[485] / COM3[485] / CAN Bus FLZ232000 Multi-Connector cable COM1[232] / COM3[232]
COM1 / COM3 [RS485] / CAN Bus 9 Pin, Fem ale, D-sub Com 1 Com 1 Com 3 PIN# Sym bol [RS485]2w [RS485]4w [RS485]
CAN Bus
PIN#
Sym bol
1
Not used
1
Rx-
Data-
Rx-
2
RxD
Received Data
2
Rx+
Data+
Rx+
3
TxD
Transmitted Data
3
Tx-
Tx-
4
Not used
4
Tx+
Tx+
5
GND
5
GND
6
Not used
6
Data-
7
RTS
Transmitted Data
7
CAN_L
CAN_L
8
CTS
Received Data
8
CAN_H
CAN_H
9
Not used
Ground Ready to send output Clear to send input
Contact: WEINTEK LABS., INC.
9
TEL: +886-2-22286770
Data+
Ground Data-
Data+
Web:www.weintek.com eMT3070A1_DataSheet_E NG_20150123