Molding
420 OUTRAGE PHOTO ALBUM
Caption will go here.
Congratulations on the purchase of your new Boston Whaler 420 Outrage! And welcome to the next chapter in your boating story, filled with the many incredible experiences a 420 Outrage makes possible. This album will provide a window into the early, middle and final stages of your boat’s development, documenting its progress through the manufacturing and testing processes. We’ll be sharing regular updates with new photos in place each time, so be sure to flip through to see the very latest. We’re so glad to have you as part of the Boston Whaler family. Wishing you all the best in your adventures ahead! Sincerely, The Boston Whaler team
Chapter 1
MOLDING
Molding
It all starts with a strong foundation...
Molding
Witness the birth of your 420’s hull.
Molding
The hull is inverted to allow for lamination.
Molding
A period of “rest� inside the mold allows laminate to set.
Molding
Et voila! The mold has been separated from the hull.
Molding
Rough edges have yet to be smoothed, but your hull already glows.
Molding
Now entering the trim and grind process...
Chapter 2
TRIM & GRIND
Trim & Grind
Technicians remove any excess lamination.
Trim & Grind
Every inch gets a thorough polish.
Chapter 3
PA R T S I N T E G R AT I O N
Parts Integration
Preparing your 420 to accept the many parts and options you’ve selected.
Parts Integration
Holes are added with pinpoint precision to accommodate wiring.
Parts Integration
Your hardtop also gets a thorough buffing and is prepared to receive accessories.
Chapter 4
S TAT I O N 1 A S S E M B LY
Station 1 Assembly
Heading into Assembly, the base of the cockpit has come together nicely.
Station 1 Assembly
In Station 1, components including the bilge, battery stations, fuel tanks, lighting and generators are added.
Chapter 5
S TAT I O N 2 A S S E M B LY
Station 2 Assembly
Make way for the dive door!
Station 2 Assembly
The European Summer Kitchen installation in progress.
Station 2 Assembly
By Stage 2 Assembly, your 420 is ready for its helm console and electrical panels.
Station 2 Assembly
Work continues on the cabin...