158 TUBE BENDER
de Ma SA in U
Hawke Tube Bender Aluminum Die Cast Frame 36 1/2" x 9 1/2" base 18" H Maximum Capacity- 2" x 2" x 11 ga tube
Pipe Roller Kit Sold Seperately Maximum capacity- 2", sch 40 or 2 1/4" cap rail
Side View
HAND SCROLLING MACHINE
Standalone Scroll Bender 17000 Bend 2 1/2” to 8” Scrolls THIS COMPLETE, STANDALONE SCROLL BENDER CAN BE MOUNTED IN A VISE RIGHT ON YOUR WORKBENCH. COMES COMPLETE WITH VISE-HELD SCROLL BENDER FRAME AND GENERAL PURPOSE SET OF SCROLL DIES FOR BENDING 2 1/2", 4", & 5" DIA. SINGLE TURN AND 6 1/2" & 8" DIA. 1 1/2 TURN SCROLLS (SEE 65B BELOW)
5" Single Turn
*BENCH VISE NOT INCLUDED
4" Single Turn
2 1/2" Single Turn
6 1/2" 1 1/2 Turns
4" Single Turn
6 1/2" 1 1/2 Turns
6 1/2" 1 1/2 Turns
8" 1 1/2 Turns
All components on this page have a black finish
D&D TECHNOLOGIES
159
MLTPS2BGA
MLVPS2BGA
TCHDMA1 TruClose Heavy-Duty Multi-Adjust 132 Lbs Max. Capacity
LLAA Series 2
MLSPS2 Side Pull
TCHD1AL2-MK2 TruClose Heavy Duty Align 132 Lbs.
LB118BX
TCA1L2-MK2 TruClose Regular Align 55 Lbs. Max. Capacity
TCHD1L2-MK2 TruClose Heavy-Duty 132 Lbs Max. Capacity
TCA4 TruClose Regular Deco 55 Lbs Max. Capacity
160
LOCINOX ORNAMENTAL LOCKS
RUSTPROOF
LAKY10FBL For 1/2" profile
LAKY20FBL
1 3/16"
For 3/4" profile
LAKY30FBL For 1 1/4" profile
Dead bolts extend an additional 3/8"
LAKY40FBL For 1 1/2" profile
LAKY50FBL For 2" profile
Aluminum powder coated black casing Dead bolts and mounting bolts are in stainless steel Profile
Samson Gate Closer Double adjustment for closing speed & latch speed Made of rust-proof material Designed for exterior use Max. Capacity: 180LBS
Technical Specs are available upon request
LOCINOX ACCESSORIES
3018LA Adapter for round profiles
3019LA Adapter for Round Profiles
LAKY SAKLQF Gate Keeper
IKIT60 Available for different profile thicknesses
3970LA Drilling Gig Adjustable for different profile thicknesses
161
162
POWERS FASTENERS, INC. PRODUCTS Adhesive Anchoring System AVAILABLE IN QUIK-SHOT (10 FL. OZ.)- 8487SD DUAL CARTIAGE (8 FL. OZ.)- 8480SD
Manual Injection Gun
MANUFACTURER’S INSTALLATION GUIDELINES ARE AVAILABLE FOR ALL PRODUCTS
VARIOUS SIZES AVAILABLE
Strap-Toggle™ HOLLOW WALL ANCHOR
Lag Shield™ SHELL EXPANSION ANCHOR
VARIOUS SIZES AVAILABLE
Hollow-Set Dropin™
Zamac Nailin®
INTERNALLY THREADED EXPANSION ANCHOR RECOMMENDED FOR HOLLOW CONCRETE BLOCKS
NAIL ANCHOR
VARIOUS SIZES AVAILABLE
Power-Stud™
Lok-Bolt™
WEDGE EXPANSION ANCHOR
SLEEVE EXPANSION ANCHOR
VARIOUS SIZES AVAILABLE
MACHINERY & ACCESSORIES
163
FMB Band Saws From the portable to the fully automatic 4" - 20" Cutting Capacity Many models to choose from
Shown at right: Phoenix Pull-Down Model Swivel saw head with a precision protractor 0-60° right only Also available in SEMI-AUTOMATIC 110V or 220V/3 Phase
Sawzit Synthetic cutting fluid Sold in: 1-Gallon 5-Gallon
Cutting Capacity
0°
45°
60°
Round
8 5/8"
5 7/8"
3 1/2"
4" x 6"
3 3/4" x 3 1/2"
5 1/4"
3 1/2"
Rectangle 7 3/4" x 9 1/2" Square
7 3/4"
Minor Portable Bandsaw
Blades
Swivel saw head with a precision protractor 0-45° right only 110 Volts
Available for all machinery carried by D.J.A.
Cutting Capacity
0°
45°
Round
4"
2 3/8"
Rectangle
4" x 6"
2 3/8" x 4"
Square
4"
2 3/8"
CUSTOMIZED SIZES FOR BLADES AVAILABLE AT REQUEST
Olympus III • SEMI-AUTOMATIC CYCLE CLAMPS, SAW CUTS, SAW UP, VISE UNCLAMPS • SWIVEL SAW BASE 45° RIGHT WITH DIGITAL READOUT OF THE CUTTING ANGLE • THRUST RING FOR MACHINE ROTATION • SAWHEAD IS SUPPORTED BY TWO ROUND COLUMNS • MAIN COLUMN IS 6" AND THE SUPPORT COLUMN IS 4" • COLUMNS ARE CHROME PLATED AND LUBRICATED • SAWBLADE TRAVELS WITH 10° INCLINATION FOR BEST CUTTING • HEAVY-DUTY MACHINE BASE OF WELDED STEEL CONSTRUCTION • SPECIAL HYDRAULIC VALVE FOR MAXIMUM CUTTING PERFORMANCE • MECHANICAL BLADE TENSION WITH BUILT-IN INDICATOR • PRECISION CARBIDE BLADE GUIDES WITH ROLLER GUIDES
Specifications
164
MACHINERY
CP-30 ROLLING MACHINE D.J.A. OFFERS MACHINERY FOR EVERY NEED, SIZE, AND APPLICATION
MACHINERY & ACCESSORIES
165
Metabo Products Grinding machines, cutting and grinding disks, die grinders. Other Metabo products available.
Straight Grinder
14" Chop Saw CS 25 355
Angle grinder W7-115 Spindle thread M14 Robust Metabo Marathon motor 4-1/2" angle grinder Rated input power 750W
W14-150Ergo
W23-230
1400 watt, 6" angle grinder Handle rotatable without tools Spindle stop
2300 watt, 9" angle grinder Metabo safety switch: lock against unintentional start
GE700 710 watt electronic straight grinder The multi-talented one with extended grinding spindle, double-ball bearing; ideal for grinding and sharpening at difficult-to-reach places
Makita G600 1/4" Die Grinder High speed (25000RPM) for maximum production •All ball bearing construction for long tool life •1/4" collet capacity •3/4" maximum wheel size for small grinding applications •Accepts metal cutters and burrs for production work •Double insulated
Other Makita products available.
Milwaukee Straight Grinder
High Quality Sanding Disc
Back Pad 4 1/2", 5", 7"
Available in 3", 5" and 6" Features of 6" diameter straight grinder: •15 AMP, 5500RPM •6" diameter wheel •Coated spindle housing for cool gripping surface •Hinged face plate for quick, easy wheel replacement
Grinding Disc 4 1/2", 5", 7"
4 1/2", 5", 7" Available in different grit Sold in pack of 25
Flap Sanding Disc 4 1/2", 5", 7" Available in different grit
Cutting Disk 4 1/2", 5", 6", 9", 10", 12", 14"
Carbide Burs SD
SC SB
SF
SE
SH
SL
SG
SM
166
MACHINERY & ACCESSORIES
Eureka Bending Unit BASE UNIT SHOWN WITH OPTIONAL BAR FOLDING TOOL
Base Unit Add-Ons
“C”- CIRCLES & CURVES ROUND: 3/4" MAX SQUARE: 3/4" MAX SOLID RECTANGLE: 2" X 3/8" MAX
“S”- SCROLLS ROUND: 3/8" MAX SQUARE: 3/8" MAX SOLID RECTANGLE: 1 1/4" X 3/8" MAX
“P”- BAR FOLDING ROUND: 3/4" MAX SQUARE: 3/4" MAX SOLID RECTANGLE: 3" X 1/4"
ACCESSORIES FOR ROGERS #10
Jolly PJE MANUAL BAR BENDER MAX. CAPACITY: ROUND: 3/4" SQUARE: 3/4" SOLID RECTANGLE: 4" X 3/16"
Notcher Rogers #10 Mechanical punch and sheer machine Ideal for channel punching MAX. CAPACITY: ROUND: 3/4" SQUARE: 3/4" FLAT: 1/4” X 4" ANGLE: 2” X 2” X 1/4" CHANNEL: 2” X 1/2” X 1/8" PUNCH 7/8" RD HOLE THROUGH 1/4" MATERIAL AVAILABLE 110V OR 220V
BLADES
T-Joint Pipe Notcher
Spearpoint MAX: 1" X 1" X 16GA. TUBE
MACHINERY & ACCESSORIES
167
NC Tools Whisper Daddy #2 Complete With: Hose Pressure Guage
3 Burner Propane Gas Forge Firebox: 6" x 12" x 9"
DOES NOT INCLUDE: Stand, Propane Tank or Blacksmith
Anvil Calvary Anvil 112 LBS
Complete line of forges and anvils is available
EVOLUTION POWER TOOLS PRODUCTS
BLADE SPECIFICATIONS Max Diameter: 15" Bore Diameter: 1" Kerf (Thickness): 0.090" (3/32”)
Blades for all Evolution Products are available
EVO180 7" diameter TCT blade
EVO380 High technology 15" TCT steel cutting super dry cut saw
Motor (115v ~ 60 Hz) Maximum Box Section 90° (1/4" Wall) Max Square 45° (1/4" Wall) Rectangle 90° (1/4" Wall) Rectangle 45° (1/4" Wall) Round 90° (1/4" Wall) Round 45° (1/4" Wall) RPM No Load Recommended Maximum Duty Cycle Sound Pressure Level (Under Load) Weight Maximum Dimensions (HxWxD)
2200w 4-3/4" x 4-3/4" 3-1/2" x 3-1/2" 3-3/4" x 7" 3-1/16" x 4-5/16" 5 1/8" 4 1/8" 1450 30mins 112.4dB(A) 50.6lbs 22" x 22" x 12-3/4"
Magnetic Drill Bits 3/4" Shank Available for 1" depth 2" depth
Motor (115v ~ 60 Hz) Maximum Box Cutting Capacity (1/8" Wall) Optimum Cutting Depth RPM No Load Recommended Maximum Duty Cycle Sound Pressure Level (Under Load) Vibration Level (Under Load) Weight Maximum Dimensions (HxWxD)
1200w 2" 1/4" 3500 30mins 98.5dB(A) 2.3m/s2 14.4lbs 9" x 16" x 10-1/2"
230-HDX 9" TCT steel cutting circular saw
ME3500 Magnetic Drill
Carbide Tipped Cutter Recommended for Stainless Steel & Harder Alloys 3/4" Shank 1", 2", 3", 4" depths
Motor (115v ~ 60 Hz) 1750w Maximum Box Cutting Capacity (1/4" Wall 90°) 3-1/4" Maximum Box Cutting Capacity (3/16" Wall 45°) 2-1/8" Optimum Cutting Depth 1/2" RPM No Load 270 Recommended Maximum Duty Cycle 30mins Sound Pressure Level (Under Load) 108.7dB(A) Vibration Level (Under Load) 3.9m/s2 Weight 19.8lbs Maximum Dimensions (HxWxD) 12-1/2" x 17" x 12-1/2"
Carbide Tipped Hole Cutter for cutting pipe, thick steel, steel plate, iron, aluminum, copper, cast iron, & stainless Up to 1" thick Other sizes available As Shown: CT7
168
MACHINERY & ACCESSORIES Strait-O-Flex
STRAIGHTENING Use the Strait-O-Flex for straightening stringers, floor gratings, plates, channel door frames, pipe, bars or angles that have been deformed during welding or punching. BENDING The Strait-O-Flex may be used for large radius bending of pipe, bars, handrail moulding, tubing, and small angles or channels.
41 LBS
22 LBS
Made In U.S.A. Made In Germany
Gruel
SFX1000
Portable or stationary mounting straightening and bending tool. Straightening of pipe, bars and angles that have been deformed during welding or punching process. Bending: radius bending of pipe, bars, handrail molding, tubing, and small angles or channels.
All R&B Wagner product images reprinted by permission of R&B Wagner.
Soapstone & Holder Sold with 3 refills 3/16" x 1/2" Additional Soapstone Sold in Package of 6 or Case of 144
Multiple Angle Square Short Leg: 23 5/8" Long Leg: 47 1/4" 0째 - 270째 Aluminum legs
Picket Spacing Tool Spaces can range from 1 1/4" to 6"
For Fast & Easy Fence & Railing Layout
Closed Position
Open Position
MACHINERY & ACCESSORIES HONDA Powered Portable Engine Driven Welder/Generator (MPM 165) Lightweight, compact design 150 Amps @ 24 VDC 2.0 KVA 110 VDC Pulsed Aux. 7.2 HP @ 4000 RPM Average Run Time (Tank) - 3 1/2 hours 70 LBS 18" L x 14 1/2" W x 16 1/2" H
Excellent Welding Characteristics: Runs 7018 Electrodes
Back View
Front View
Truly Portable, Goes Where Others Can’t! Arc One Portable Welder Input Voltage/Phase: 115 +/- 10% / Single Input Hz: 50/60 Dimensions: 12" L x 5" W x 8" H 10 LBS Electrode Capacity: 3/32" Includes Ground Cables & Electrode Cable Holders
Sliding T-Bevel 8" 10"
10" Abrasive Cut-Off Saw 3450 RPM 3 HP, 1 PH 110 V 23" x 10" x 14" H Swivel Vise Opens 4" Max. 110 LBS
Larger Models Are Available
Stainless Steel Blade Aluminum Handle
169
170
DYNAFLUX PRODUCTS
HTR-120 Solution Sold Seperately in 1 Gallon or 16 fl. oz. containers
HTR-200 Heat Tint Removal System Quickly removes heat tint and discoloration from welded heat-affected zones. Eliminates grinding, sanding, buffing and polishing 110 or 230 vac Power Supply System Includes: Spoon (As Shown, Recommended for curves and hard-to-reach areas) OR Roller (Recommended for Longer Welds) (6) Boots for Spoon (HTR120-3) (1) 16 fl. oz. HTR-120 Solution (HTR120-06)
Anti-Spatter (CR200-16) 16 oz. Sold Single Can or Case of 12 Recommended for use on MIG Gun Nozzle. Spatter falling on treated area will not stick, minimizing clean-up of welding area
Nozzle Dip (CR731-16) 16 fl. oz. Recommended for use on MIG Gun Nozzle and contact tips
Brite Galv (CR305-16) 16 oz. Sold Single Can or Case of 12 Zinc Rich Coating Prevents Rust & Corrosion Use for touch-ups on hot dipped galvanized surfaces *Recommendations & usage suggestions are per manufacturer
VINYLAST PAINT & PATINA
Vinylast can also be used to paint over hot dipped galvanized material Vinylast • RAL0001- Smithy Black • RAL0001G- Glossy Black • RAL0002- Brown • RAL0003- Graphite • RAL9010- White • RAL1016- Safety Yellow • RAL3000- Fire Red • RAL1013- Pearl White • RAL7030- Stone Grey • RAL9006- Aluminum • RAL6010- Grass Green • RAL6005- Moss Green • 113/19- Fast Primer, Zinc Phosphate • 112/13- Anti-Rust OTHER COLORS ARE AVAILABLE TO ORDER
Patina • Anitque Pink • Copper • Ruby Red • Gold • Green • Silver
MACHINERY & ACCESSORIES
Sold in: 1-Pint 1-Quart 1-Gallon 5-Gallon
ENTIRE LINE OF JAX PRODUCTS IS AVAILABLE
JAX BLACKENER Iron, steel, and nickel blackener Produces an antique metallic black finish on iron, steel, and nickel
JAX ANTIQUE RUST Produces an antique rust finish on iron and steel.
JAX BROWN Brass, Bronze, and Copper Darkener. Produces an antique brown finish on brass, bronze, and copper.
JAX BROWN-BLACK Brass, Bronze, and Copper Darkener Produces an antique brown-black finish on brass, bronze, and copper.
Hartline Products Rockite Cement Hydraulic cement for fastening railings and fences
JAX BLACK Brass, Bronze, and Copper Darkener Produces an antique black finish on brass, bronze, and copper.
AVAILABLE IN: 5-GALLON PAILS 1-GALLON PAILS
Manual Iron Worker
VOGEL TOOL & DIE PRODUCTS
Cutting Capacity: 3/4" rd, 3/4" sq, 2" x 2" x 3/16" angle Sheering Capacity: 1/4" plate Blade Length: 4"
Arc-Fit Angular Unit
Triple Base Turntable
250 LBS SMALLER MODELS ARE AVAILABLE
For Notch Tube or Pipe for Angled Weld Joints
FULL LINE OF VOGEL TOOL & DIE PRODUCTS IS AVAILABLE
Housing
For Notch Tube or Pipe for 90° Weld Joints Assembly
+
Fits Vogel’s Power Press Notch three sizes of pipe with no changeover
Complete Hand Press
Housing & Assembly
171
Accessories
25
CA-T Illustration
Stainless Steel Cleaner E-Z Clean
Dissolves minor corrosion, then leaves a protective coating that lasts for months. Includes an 8-oz. spray-on rust and stain remover and a 4-oz. bottle of protectant
DJA Design Collection Book
DJA 232 Table-Top Stainless Steel Cable Rail Display
252-Page Collection of Finished Gates, Balconies, and Railings, along with their individual components. Great Reference for the Office
26
Accessories
714600M
Multi-Purpose Tool Can be used as a level, protractor, or compass 0 degrees to 180 degrees
715
Multiple Angle Square 0 degrees to 270 degrees