Testing and Qualification Providing a full range of materials and corrosion testing services DNV provides you with cost effective solutions to materials, corrosion and integrity problems. Valuable Laboratory Testing Services With an increasing need to test and verify components, it is essential to have a complete, full service corrosion and materials laboratory available at all times. DNV provides laboratory testing to assist with a wide range of practical solutions when evaluating and selecting materials, coatings, inhibitors and qualifying new technologies. Our scientists have extensive experience in designing laboratory tests and selecting the critical variables that permit accurate simulation of field conditions. We provide testing, certification and verification of materials and technologies in accordance with NACE, ASTM, CSA, ISO, NORSOK and DNV standards. Where standards do not exist, we can help develop requirements and customize tests to qualify new technology. We offer a variety of testing techniques for many materials, corrosion and integrity problems including:
DNV (Columbus) 5777 Frantz Road Dublin, OH 43017 USA 614.761.1214 dnvcolumbus@dnv.com www.dnvcolumbus.com
Electrochemical techniques (EIS, CPP, CPT, CCT, ECPT, etc.)
Environmentally induced corrosion
Coupon testing for internal corrosion
Microbiological testing
Multiphase flow testing
Inhibitor and coating testing
Constant, cyclic and slow strain rate loading
Elastomers—non-metallic materials
Hydrogen sulfide testing
High temperature and pressure testing in different environments
Soil testing: chemistry, cations, anions, pH, resistivity, LPR, physical properties and particle distribution
Testing and Qualification Providing a full range of materials and corrosion testing services State-of-the-Art Equipment DNV provides specialists for assistance in selecting optimal test sequences and producing the desired information at the most economical cost. We also have modern equipment to perform tests to meet your needs, including:
Online sensors and sacrifical anodes
Constant, cyclic and slow strain rate loading
Over 50 autoclaves
Pressure, Volume, Temperature (PVT) quartz window cell
Salt fog chamber
UV exposure cabinet
Potentiostats, FRAs, ZRAs, RDE, RCE
Atomic Force Microscope (AFM) and Near-Field Scanning Optical Microscope (NSOM) for in-situ characterization of processes at the surface level
Scanning Electron Microscope (SEM) with Energy Dispersive Spectroscopy (EDS)
UV microscope
Flow loop Pressure: up to 10 bars Temperature: up to 130◦ C Superficial Gas Velocity: 0 to 25 m/s Superficial Liquid Velocity: 0 to 5 m/s Liquid Viscosity Range 0.5 to 300 cP
DNV (Columbus) 5777 Frantz Road Dublin, OH 43017 USA 614.761.1214 dnvcolumbus@dnv.com www.dnvcolumbus.com