R
RESIDENTIAL
philihardware.com
New
The IP/IS Series Interconnected Lock is a new addition to our contemporary locks. They are designed to fit with ADA requirements.
1
Security Features 200B Series ANSI Grade 3 Certified Deadbolt (ANSI/BHMA A156.5-2001) for Auxiliary Lock and Associated Products Product meets and exceeds ANSI Grade 3 requirements for auxiliary locks CONSTRUCTION Steel construction for long-lasting operation. Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute.)
OUTSIDE COVER Wrought brass or stainless steel cover.
Twisting the latch bolt to adjust the backset.
SCREWS Combination screws suitable for both wood door or metal door mounting.
STRIKE Standard 1-3/4” x 2-1/4” full lip strike.
CYLINDER 5pins tumbler cylinder
LATCH
Precision cylinder construction provides excellent operative durability and reliability.
¼” dia hardened steel rod insert to resist sawing and cutting.
Pre-drilled construction hole for construction keying.
Full 1” throw antirust stainless steel latch bolt.
Nickel plated solid brass key.
1” x 2-1/4” Mortise in deadlatch, adjustable for both 2-3/8” and 2-3/4” backset requirement.
500T Series ANSI Grade 3 Certified Leverset
(ANSI/BHMA A156.2-2003) for bored & preassembled locks & latches Product meets and exceeds ANSI Grade 3 requirements for single-point locks and latches LEVER
ROSETTE
Solid Zinc lever.
Wrought brass or stainless steel cover.
Reversible lever design for both right-hand and left-hand door mounting.
CONSTRUCTION Steel construction with square spindle mechanism for long lasting operation.
Multiple design and finish to meet variety demands. (Please refer to page 9-10 for detail)
Exposed trim finish meets or exceeds 96hrs Salt Spray test required by ANSI (American National Standard Institute). Interior and exterior aligning tabs. For mounting on ø2-1/8" standard door prep.
SCREWS Combination screws suitable for both wood door or metal door mounting.
STRIKE Standard 1-3/4” x 2-1/4” full lip strike with adjustable tab.
CYLINDER 5pins tumbler cylinder
LATCH
Precision cylinder construction provides excellent operative durability and reliability
1” x 2-1/4” Mortise in latch, adjustable for both 2-3/8” and 2-3/4” backset requirement.
Pre-drilled construction hole for construction keying.
Industrial standard 1/2” throw latch bolt.
Nickel plated solid brass key.
2
Contemporary Design KELLINGTON HANDLESET
AM SERIES LEVER
HOLLYWOOD (HW) US15
2-23/64" 2-3/8"~2-3/4"
1/2”
3-15/16"
3-15/16"
2-33/64"
1-3/8"~2"
2-1/4"
37/64"
1" 1-3/8"~2"
1-3/8”~1-3/4” 1-1/8” 1”
2” 2-9/16” 5” or 5-1/2”
2-1/4”
4-1/2”
3-1/2”
2-1/4”
2-3/8”~2-3/4” 2-3/4” 1”
SOHO RC (SH) US26 Round Rosette
2-31/64”
8-27/64”
13-15/16”
2-3/4”
2-11/32" 1/2”
3-15/16"
KELLINGTON (KN) US15
SOHO SQ (SH) US15 Square Rosette 1-3/8"~2"
FINISHES
US15 Satin Nickel
3
US26 US26D Polish Chrome Satin Chrome (Soho & Deadbolt only)
AUSTIN (AT) US26
ANSI Grade 3 UL
5-1/2” CTC INTERCONNECTED LOCK
R
LISTED
200LT DEADBOLT
NEW!
LTR US26
IP US26
SPECIFICATIONS Door Prep Door Fitting Cylinder Latch Latch Bolt Strike Door Handing ADA
IS US26
2-1/8” cross bore, 1” edge bore. Handleset: 1-3/8”~1-3/4”, 2” door with thick door kit. Deadbolt/Lever 1-3/8”~2”. KW1 standard, SC1 optional. 2-3/8” and 2-3/4” adjustable. UL latch for IS/IP series. Deadbolt: 1” throw. Lever: 1/2” throw. 2-1/4” full lip round corner. Handleset/Privacy Lever: handed (specify LH or RH when ordering). Deadbolt Interior turn piece & Privacy Lever with Push Button. Meets 4.13.9 ADA requirements.
LTS US26
R
by PHILADELPHIA HARDWARE GROUP
4
Interconnected
ENTRANCE HANDLESETS NEW!
CHATEAU (CH) US10B
FAIRMONT (FT) US15
1-3/8” ~ 2”
2-27/32”
5-1/2”
2-3/8” and 2-3/4”
15-29/32”
4-7/32”
Ruby
Venezia
7-15/16”
2-9/16”
2-3/4” 2-53/64”
2-3/8” and 2-3/4”
2-3/8” and 2-3/4”
2-27/32”
1-3/8” ~ 2”
3-1/8”
1-3/8” ~ 2”
4-9/64”
2-9/16”
7-15/16”
Royal
7-15/16”
2-9/16”
15-27/32”
5-1/2” 2-13/32”
16-3/4”
10-9/32”
5-1/2”
3-1/16”
2-53/64”
RICHMOND (RI) PVD
5
HAMPTON (HA) US12P
4-1/16”
Hartford
Solid Brass
500TB SERIES LEVERSETS HARTFORD (HD) US12P
ANSI Grade 3
2-9/32”
1-3/8” ~ 1-3/4”
2-9/32”
2-9/16”
4-7/32”
FASCINITE (FE) US15A
1-3/8” ~ 1-3/4” 2-31/64”
2-13/32”
2-9/16”
4-11/64”
LAFAYETTE (LA) US15
2-7/8”
1-3/8” ~ 1-3/4”
2-19/32”
2-9/16”
4-7/32”
2-13/32”
1-3/8” ~ 1-3/4”
2-13/32”
VENEZIA (VA) US10B
2-9/16”
4-1/16”
R
by PHILADELPHIA HARDWARE GROUP
6
Interconnected
IL SERIES
UL R
LISTED
301IL-CT Charlotte (CT) Lever US15 300IL-RY Royal (RY) Lever US15 300IL-SD San Diego (SD) Lever US15
3-5/16”
4”
7-15/16”
3-5/16”
4” 4-43/64” 4-39/64” 1-3/8” ~ 1-3/4” 1-5/8” ~ 2”
7
Mounting without Exterior Escutcheon Plate
ANSI Grade 2 IZ SERIES UL R
NEW!
LISTED
2-53-64” 1-5/64”
1-3/8” ~ 1-3/4”
17/32”
45/64”
5-1/2’”
2-61/64”
9-19/32”
1-57/64”
2-9/16”
2-3/8” 2-3/4”
2-41/64”
2-9/16”
4-9/64”
301IZ-CT Charlotte (CT) Lever US15
7/16” 23/64”
27/64” 11/32”
301IZ-CT-US15 Charlotte (CT) Lever 301IZ-SD-US15 San Diego (SD) Lever
INTERIOR APPLICATION
South Bay
Escort R
by PHILADELPHIA HARDWARE GROUP
8
Handlesets & Levers 400 SERIES HANDLESETS
500T SERIES LOCKSETS ROYAL (RY) US10B
MANHATTAN (MH) US5
ESCORT (ET) US3
MAYFAIR (MA) US10B
PALMER (PA) US26
IMPERIAL (IM) US15
KELLINGTON (KN) US12P
9
SHELBY (SY) US12P
Lever Design
ANSI Grade 3 500T SERIES LOCKSETS CAMBER (CM) US15
JURAN (JU) US15A
NEW!
Knob Design
100T SERIES LOCKSETS
RUBY (RB) US12P
OLYMPUS (OS) US10B
COMBOSET 300T Series
300T US32D
BALA (BA) US32D
GUARDIAN (GN) US32D
ESCUTCHEON PLATE 5” CENTER TO CENTER
US3
R
by PHILADELPHIA HARDWARE GROUP
10
Deadbolt
200B SERIES
SINGLE CYLINDER US3
DOUBLE CYLINDER US3
ONE SIDED (Full Bore) ONE SIDED (Half Bore) US32D US32D
Sliding
DOOR LOCK
2-3/4”
SPECIFICATIONS
US3
2-1/4”
Passage
US15
Door Prep Door Fitting Exposed Trim Strike
2-1/4” H x 1-3/4” W notch. 1-3/8” ~ 1-3/4” door thick. Brass, stainless steel, or zinc alloy. 1” x 2-1/4” rectangular.
Privacy
NEW!
Fits 2-1/8” cross bore 2-3/8” fixed backset latch
US15 Passage
US15 Privacy
FINISHES
PVD Lifetime
US3 Polish Brass
US5 Antique Brass
US10B US12P Oil Rubbed Bronze Tuscany Bronze
Not all styles available in all finishes. See finish chart on page 12 for details.
11
US15 Satin Nickel
US15A Pewter
US26 Polish Chrome
Finish
AVAILABILITY
SERIES
ITEM
Abbrev
PVD US3 US5 US10B US12P US15 US15A US26 US26D US32D 505
605
609
613
619
620
625
626
Interconnected Handleset and Solid Brass Levers CHATEAU (CH) 400 FAIRMONT Interconnected (FT) HAMPTON (HA) RICHMOND (RI) 500TB FASCINITE (FE) HARTFORD (HD) Solid Brass LAFAYETTE (LA) VENEZIA (VA) Handleset, Interconnected Lock, Levers, Knob, Deadbolt and Combo Pack 400 IMPERIAL (IM) KELLINGTON (KN) 2PC Type MAYFAIR (MA) 500T CAMBER (CM) ESCORT (ET) JURAN (JU) MANHATTAN (MH) PALMER (PA) ROYAL (RY) SHELBY (SY) 300IL 4”CTC 300IZ 5-1/2CTC 200B DEADBOLT BALA 100T (BA) GUARDIAN (GN) OLYMPUS (OS) RUBY (RB) 300T/310T Combo Contemporary Interconnected Lock, Levers and Deadbolt 500AM AUSTIN (AT) Contemporary HOLLYWOOD (HW) SOHO (SH) 301IP 5-1/2” CTC 301IS 5-1/2” CTC 200TS DEADBOLT 200TR DEADBOLT Product avaialble in stock. Please refer to price book for details. Other finishes may be available upon request. Please allow longer lead time, min. 300 lock order.
Accessories Lock Strikes
630
9101
9102
9103
9108
9125
1-1/8” x 2-3/4” “T” type with tab
1-3/4” x 2-1/4” Full lip with tab square corner
1-3/4” x 2-1/4” Full lip with tab 1/4” radius round corner
1-3/4” full round with tab for tubular type drive-in latch
1-1/4” x 2-3/4” “T” type adjustable
9111
9112
9113
9117
9119
1-1/8” x 2-3/4” Rectangular square corner
1” x 2-1/4” Rectangular square corner
1” x 2-1/4” Rectangular 1/4” radius round corner
1-3/4” x 2-1/4” Full lip 1/4” radius round corner
1-1/4” x 3-5/8” Security strike 1/4” radius round corner
Deadbolt Strikes
Keys KW1 5-Pins
TE5
HK5
SC1 5-Pins
SC5
SC4 6-Pins
HK6
SC6
9301-K KW1
9301-S
SC1 & SC4
R
by PHILADELPHIA HARDWARE GROUP
12
Accessories Dead Latches for 100T Entrance
Latches for 200B
Optional: 9091 square corner 9091UL UL square corner 9092UL UL round corner
Optional: 9071 square corner
9073 Mortise Dead Latch 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
Dead Latches for 500TB Entrance
Mortise Deadbolt Latch 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
Optional: 9050 square corner 9050UL UL square corner 9050RUL UL round corner
9075
9093
9050R
Drive-in Dead Latch 2-3/8” or 2-3/4” adjustable backset 1” Diameter
D904
9092
Mortise Dead Latch (Brass Bolt) 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
Dead latch drive-in cap for converting mortise latch to Drive-in Latch
9050C
Spring Latches for 101T, 102T, 501TZ, 502TZ
Drive-in Dead Latch (Brass Bolt) 2-3/8” or 2-3/4” adjustable backset 1” Diameter
Optional: 9072 square corner
Drive-in Deadbolt Latch 2-3/8” or 2-3/4” adjustable backset 1” Diameter
D909
Deadbolt latch drive-in cap for converting mortise latch to Drive-in Latch
Spring Latches for 400 Handleset (MA/IM/CA/KN) Optional: 9080 square corner 9080UL UL square corner 9080RUL UL round corner
9080R
9074 Mortise Spring Latch 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
9076 Drive-in Spring Latch 2-3/8” or 2-3/4” adjustable backset 1” Diameter
D907
Spring latch drive-in cap for converting mortise latch to Drive-in Latch
Dead Latches for 500TZ Entrance
(VA/HD/FE/LA)
9080C Drive-in Spring Latch 2-3/8” or 2-3/4” adjustable backset 1” Diameter
Spring Latches for AM Series (SH/HW/AT)
Optional: 9079 square corner 9079UL UL square corner 9079RUL UL round corner
Optional: G90A3T square corner
9079R
Optional: 9045 square corner
Mortise Dead Latch 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
Dead latch drive-in cap for converting mortise latch to Drive-in Latch
Mortise Spring Latch 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
G90A3C
9079C
Drive-in Spring Latch 2-3/8” or 2-3/4” adjustable backset 1” Diameter
Drive-in Spring Latch 2-3/8” or 2-3/4” adjustable backset 1” Diameter
9045C Drive-in Dead Latch 2-3/8” or 2-3/4” adjustable backset 1” Diameter
G90A3R
Mortise Spring Latch (Brass Bolt) 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
9045R
D924
Mortise Spring Latch 2-3/8” or 2-3/4” adjustable backset 1” x 2-1/4” Round Corner Faceplate
Spring Latches for 400 Interconnected Handleset (RI/CH/HA/FT), 501TB, 502TB, and 400 Handleset (MA/IM/KN) with Solid Brass lever
D927
Spring latch drive-in cap for converting mortise latch to Drive-in Latch
D927
Spring latch drive-in cap for converting mortise latch to Drive-in Latch
Parts 9782 4-way plate is available for converting drive-in latch to 1” x 2-1/4” square mortise latch.
13
Functions
400 Series Handleset – ANSI A156.2, Series 4000, Grade 3
400 410
501T
502TP
400 Single Cylinder Interconnected Handleset (ANSI F102) Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever. Both deadbolt and latch bolt are retracted to unlocked position by operating inside lever. 410 Double Cylinder Handleset Deadbolt thrown or retracted by key from either side. Latch retracted by thumbpiece from outside or by inside knob/lever.
405
500T
400 Single Cylinder Handleset Deadbolt thrown or retracted by key from outside or by inside turnpiece. Latch retracted by thumbpiece from outside or by inside knob/lever.
500TP
405 Dummy Handleset For use as door pull or as dummy trim on inactive leaf of double door. Fixed thumbpiece and inside knob/lever. Dummy cylinder with inside plate.
500T Series Lever Lock – ANSI A156.2, Series 4000, Grade 3 500T Entrance Turn button lock/unlock outside lever. Key lock/unlock from outside.
500TP Entrance (Push Button) Push inside button locks outside lever. Key lock/unlock from outside. Unlock by push down inside lever.
502T
501T Passage Both levers always unlocked. 502T Privacy Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism.
515T
500TP/502TP Push Button available
502TP Privacy (Push Button) Turn inside button locks outside lever. Can be opened from outside using outside turn mechanism. Unlock by push down inside lever. 515T Dummy Dummy trim for one side on door. Used for door pull or matching inactive trim.
100T Series Knob Lock – ANSI A156.2, Series 4000, Grade 3 100T
100T Entrance Turn button lock/unlock outside knob. Key lock/unlock from outside. 101T Passage Both knobs always unlocked.
101T 102T
102T Privacy Turn inside button locks outside knob. Can be opened from outside using outside turn mechanism. 115T Dummy Dummy trim for one side on door. Used for door pull or matching inactive trim.
115T
200 210
200 Series Deadbolt Lock – ANSI A156.36, Grade 3 200 Single Cylinder Deadbolt thrown or retracted by key from outside or by inside turnpiece. 210 Double Cylinder Deadbolt thrown or retracted by key from either side.
205
205 One-sided Half-Bore Deadbolt thrown or retracted by thumbpiece from inside. 206 One-sided Full-Bore Deadbolt thrown or retracted by thumbpiece from inside. Cover plate outside.
206
301
300 Series Interconnected Locks – ANSI A156.12, Grade 3
301 Entrance Single Locking, ANSI F95 Latch bolt operated by lever from either side. Deadbolt operated by turn from inside or key from outside. Operating inside lever retracted both deadbolt and latch bolt. 300 Entrance Double Locking, ANSI F97 Deadbolt operated by key from outside or by turnpiece inside. Deadlatch is locked by key from outside or by push button from inside. Turn inside lever to release deadbolt and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed.
300
304
304 Storeroom Double Locking, ANSI F98 Deadbolt operated by key from outside or by turnpiece inside. Outside lever is fixed, entrance by key only. Turn inside lever to release deadbolt and latchbolt simultaneously for immediate exit. Latch deadlocks when door is closed.
R
by PHILADELPHIA HARDWARE GROUP
14
DISTRIBUTION BY:
Philadelphia Hardware Group Inc. SAN DIEGO DISTRIBUTION CENTER (Home Office) 6590 Top Gun Street San Diego, CA 92121 Tel: (858) 642-0450 Fax: (858) 642-0454 Toll Free Tel: 1-800-545-2309 Toll Free Fax: 1-800-828-0988 www.philihardware.com
CHICAGO DISTRIBUTION CENTER 3687 Darlene Court Aurora, IL 60504 Toll Free Tel: 1-800-545-2309
Copyright ©2015 Philadelphia Hardware Group Inc. All rights reserved.
ATLANTA DISTRIBUTION CENTER 2319 Defoor Hills Road N.W. Atlanta, GA 30318 Toll Free Tel: 1-800-545-2309