Spectra-System ® Catalog One- and Two-Piece Implants
ScrewPlant®
Bone Level 2-Stage
Tissue Level 1-Stage
ScrewPlant® Internal Hex
ScrewPlus® Internal Hex
ScrewDirect® Straight Snap-on
ScrewIndirect® Screw-Receiving
GoDirect™ OverDenture
ScrewRedirect® Angled Contoured
Table of Contents Page # Implant Design & Surface
1
1037-21 Straight Abutment Includes: Fixation Screw, Transfer and Comfort Cap
Length: 1mm Platform: 3.7mm Diam
xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment
2 Product Labeling: Definitions & Descriptions
3
4-5
ScrewPlus Implants
Zirconia,Titanium, Gold & Plastic, Engaging & Non-Engaging Abutments
26-28
29-31 Surgical Tray
Selection Chart for ScrewPlant & ScrewPlus Systems
22
23-25 Components for Screw-Receiving, Ball & GPSâ„¢ Abutments
FMT Packaging & Procedures for Contoured Abutments
18-19
20-21 Cover Screws, Healing Collars, Transfers & Analogs
GoDirect Implants
14-15
16-17 Prosthetic Procedures for ScrewIndirect & GoDirect Implants
ScrewDirect Implants
10-11
12-13
ScrewRedirect Implants
ScrewPlant Implants
6-7
8-9 ScrewIndirect Implants & Components
Application-Specific Guide
32-33
Instruments, Surgical Drills & Surgical Sequence
Implant Design & Surface Mini-threads with Double-lead Threads for Faster Insertion The body of all Spectra-System implants are tapered evenly down from the top to facilitate insertion in an undersized socket (stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Spectra-System implants. Mini-threads start 1mm below the crest of the bone and extend for 2-2.5mm before transitioning into double-lead threads to the apex of the implant. The mini-threads are half the depth and half the distance between adjacent peaks compared to the double-lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend halfway up the implant from the apex for self-tapping insertion. Crest of the Ridge 1.0mm 1.2mm
Quadruple Lead Threads
0.6mm
0.3mm
1.2mm 0.6mm
1.2mm
Double Lead Threads
0.6mm
SBM and HA Coated Surface Options SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for our SBM and HA coated surface treatments as was used by Paragon Implant Company from 1992-2000 when these studies were conducted. SEMs of Surfaces Mini-threads textured by blasting with SBM™: Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer SBM Surface 20X
SBM Surface 50X
HA Surface 20X
HA Surface 50X
Animal Studies Bone Response to SBM Surface
1
Application-Specific Selection Guide
Application-Specific Implant System 2-Stage Implant ScrewPlant
2
1-Stage Implant ScrewPlus
1-Piece Implant ScrewDirect
1-Piece Implant ScrewIndirect
1-Piece Implant GoDirect
1-Piece Implant ScrewRedirect
Product Labeling: Definitions & Descriptions
3.7 mm 3.7 mm 3.7 mm 3.7 mm
ScrewPlant Implant Vial and Cap Label 2 3 10 = ScrewPlant SBM 37 = 3.7mmD body diameter 13 = 13mmL body length
4
103713 ScrewPlant™
13
xxxxxxxxxxxx Body ScrewPlantTM # 103713 Platform xxxxxxxxxxxx Body TM ScrewPlant # 103713 Platform
1
Implant
SBM™ 3.7mm Diam 13mm 3.7mm Diam
5 6
12
7
11
8
10
9
xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment
ScrewPlant Prosthetic Vial and Cap Label 1 2 3 10 = ScrewPlant prosthetics 37 = 3.7mmD platform diameter -21= prosthetic specific code
4
1037-21 Straight Abutment Includes: Fixation Screw, Transfer and Comfort Cap
Length: 1mm Platform: 3.7mm Diam
13
1037-21 1mmL
7 13
8 14
9
10
11
1) Our products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product description 5) Use before expiration date (XXXX-XX) 6) Gamma sterilization symbol 7) Single-use only symbol 8) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 9) Tamper proof symbol 10) Refer to Instructions For Use (IFU) 11) Lot number (XXXXXXXXXX) 12) Implant body diameter color reference on surgical tray 13) Implant prosthetic platform diameter (written and color-coded) 14) Non-sterile symbol
3
ScrewPlant ScrewPlant Two-Stage Implant System featuring:
ScrewPlant Packaging
• Internal connection with 2mm long hex & external bevel • Color-coded fixture-mount usable as a transfer & shortened for use as a straight abutment with snap-on comfort cap • 2mm extender retained by cover screw for use as a healing collar or for one-stage surgery • Surface options: SBM (Soluble Blast Media) or HA-coated • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills
3.7mmD Platform
4.7mmD Platform
Carrier/Transfer
5.7mmD Platform
Snap-On Comfort Cap
3.7mmD Implant
4.7mmD Implant
5.7mmD Implant
Extender
Fixture-Mount Transfer: Shortened for final abutment with Snap-On Comfort Cap and Transfer
step 1
4
Cover Screw
step 2
step 3
step 4
ScrewPlant: Two-Piece Implant for Two-Stage Surgery ScrewPlant
SBM and HA Surface Implants
Includes Cover Screw, Fixture Mount, Extender & Comfort Cap
3.7mmD SBM Code 103708 103710 103711 103713 103716
HA Code 113708 113710 113711 113713 113716
Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD
Length 8mmL 10mmL 11.5mmL 13mmL 16mmL
Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD
HA Code 114708 114710 114711 114713 114716
Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD
Length 8mmL 10mmL 11.5mmL 13mmL 16mmL
Platform 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD
HA Code 115708 115710 115711 115713 115716
Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD
Length 8mmL 10mmL 11.5mmL 13mmL 16mmL
Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD
103708 113708
103710 113710
103711 113711
103713 113713
103716 113716
104708 114708
104710 114710
104711 114711
104713 114713
104716 114716
105708 115708
105710 115710
105711 115711
105713 115713
105716 115716
4.7mmD SBM Code 104708 104710 104711 104713 104716
5.7mmD SBM Code 105708 105710 105711 105713 105716
5
ScrewPlus ScrewPlus One-Stage Implant System featuring:
ScrewPlus Packaging
• Internal connection with 2mm long hex & external bevel • Color-coded fixture-mount usable as a transfer & shortened for use as a straight abutment with snap-on comfort cap • 2mm extender retained by cover screw for use as a healing collar • Surface options: SBM (Soluble Blast Media) or HA-coated • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills
3.7mmD Platform
4.7mmD Platform
5.7mmD Platform
Carrier/Transfer
6.5mmD Platform
Snap-On Comfort Cap
3.7mmD Implant
3.7mmD Implant
4.7mmD Implant
5.7mmD Implant
Extender
Fixture-Mount Transfer: Shortened for final abutment with Snap-on Comfort Cap and Transfer
step 1
6
Cover Screw
step 2
step 3
step 4
ScrewPlus: Two-Piece Implant for One-Stage Surgery ScrewPlus
SBM and HA Surface Implants
Includes Cover Screw, Fixture Mount, Extender & Comfort Cap
3.7mmD SBM Code 203008 203010 203011 203013 203016
HA Code 213008 213010 213011 213013 213016
Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD
Length 8mmL 10mmL 11.5mmL 13mmL 16mmL
Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD
HA Code 213708 213710 213711 213713 213716
Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD
Length 8mmL 10mmL 11.5mmL 13mmL 16mmL
Platform 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD
HA Code 214708 214710 214711 214713 214716
Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD
Length 8mmL 10mmL 11.5mmL 13mmL 16mmL
Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD
HA Code 215708 215710 215711 215713 215716
Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD
Length 8mmL 10mmL 11.5mmL 13mmL 16mmL
Platform 6.5mmD 6.5mmD 6.5mmD 6.5mmD 6.5mmD
203008 213008
203010 213010
203011 213011
203013 213013
203016 213016
203708 213708
203710 213710
203711 213711
203713 213713
203716 213716
204708 214708
204710 214710
204711 214711
204713 214713
204716 214716
205708 215708
205710 215710
205711 215711
205713 215713
205716 215716
3.7mmD SBM Code 203708 203710 203711 203713 203716
4.7mmD SBM Code 204708 204710 204711 204713 204716
5.7mmD SBM Code 205708 205710 205711 205713 205716
7
ScrewDirect ScrewDirect One-Piece Implant System Featuring:
ScrewDirect Packaging
• Straight abutment head with retentive groove & beveled shoulder 1.5mm above crest of bone • Double-lead threads for 2X faster insertion & quadruple-lead threads near top • Color coded plastic fixture mount usable as a snap-on transfer • Snap-on plastic comfort cap usable as coping for temporary crown • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills
3.7mmD Platform
4.7mmD Platform
5.7mmD Platform
Carrier/Transfer
6.5mmD Platform
Snap-On Comfort Cap
3.0mmD Implant
3.7mmD Implant
4.7mmD Implant
5.7mmD Implant
Snap-On Comfort Cap Seat retentive snap-on comfort cap
Comfort cap maintains tissue opening
Snap-On Transfer Seat retentive snap-on transfer
8
Make transfer impression for abutment analog
ScrewDirect: One-Piece Implant for One-Stage Surgery ScrewDirect
SBM Surface Implants
Includes Carrier/Transfer & Comfort Cap
3.0mmD Code 303010 303013 303016
Diameter 3.0mmD 3.0mmD 3.0mmD
Length 10mmL 13mmL 16mmL
Platform 3.7mmD 3.7mmD 3.7mmD 303010
303013
303016
303710
303713
303716
304710
304713
304716
305710
305713
305716
3.7mmD Code 303710 303713 303716
Diameter 3.7mmD 3.7mmD 3.7mmD
Length 10mmL 13mmL 16mmL
Platform 4.7mmD 4.7mmD 4.7mmD
4.7mmD Code 304710 304713 304716
Diameter 4.7mmD 4.7mmD 4.7mmD
Length 10mmL 13mmL 16mmL
Platform 5.7mmD 5.7mmD 5.7mmD
5.7mmD Code 305710 305713 305716
Diameter 5.7mmD 5.7mmD 5.7mmD
Length 10mmL 13mmL 16mmL
Straight Abutment Analog
Code 3037 3047 3057 3065
Platform 6.5mmD 6.5mmD 6.5mmD
Includes Castable Coping
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
3037
3047
3057
3065
9
ScrewIndirect ScrewIndirect One-Piece Implant System Featuring:
ScrewIndirect Packaging Carrier/Transfer
• Screw-Receiving head with retentive groove & beveled shoulder 2.5mm above bone • Double-lead threads for faster insertion, with quadruple-lead mini-threads for reduced stress concentration near crest of bone • Color-coded plastic fixture mount usable as a snap-on transfer • Snap-on plastic comfort cap • Common prosthetic platform across all four diameters of implants • Includes 2mm implant extender • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills
5.0mmD Platform
5.0mmD Platform
5.0mmD Platform
5.0mmD Platform
Snap-On Comfort Cap
Extender
3.0mmD Implant
3.7mmD Implant
4.7mmD Implant
5.7mmD Implant
Extender Transfer
Snap-On Comfort Cap and Transfer Seat retentive snap-on comfort caps
Seat retentive snap-on transfers
Clinical Applications Screw-Retained Bar Overdenture
10
Fixed-Detachable Restoration
ScrewIndirect: One-Piece Implant for One-Stage Surgery ScrewIndirect
SBM Surface Implants
Includes Carrier/Transfer (orange), Extender, Transfer & Comfort Cap [Requires 2.5mmD Hex Tool]
3.0mmD Code 403008 403010 403013 403016
Diameter 3.0mmD 3.0mmD 3.0mmD 3.0mmD
Length 8mmL 10mmL 13mmL 16mmL
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD
Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD
Length 8mmL 10mmL 13mmL 16mmL
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD
Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD
Length 8mmL 10mmL 13mmL 16mmL
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD
Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD
Length 8mmL 10mmL 13mmL 16mmL
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD
403008
403010
403013
403016
403708
403710
403713
403716
404708
404710
404713
404716
405708
405710
405713
405716
3.7mmD Code 403708 403710 403713 403716
4.7mmD Code 404708 404710 404713 404716 5.7mmD Code 405708 405710 405713 405716
Components for use with 2mmL ScrewIndirect Extender on pg 28 ScrewIndirect Implant Copings
Code 4000-64 4000-65 4000-66 4000-67 4000-69 1000-01 1000-05
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -
Includes Fixation Screw [1000-01]
Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping (includes 1000-05) Replacement Fixation Screw - 2ea Replacement Extender Fixation Screw - 2ea
Gold
Titanium
Plastic
4000-64
4000-65
4000-66
Gold/Plastic Titanium
4000-67
4000-69
ScrewIndirect Comfort Cap, Transfers & Analog
Code 4000-13 4000-02 4000-62 4000-63 4000-06 1000-10 1000-06
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -
Description Plastic Comfort Cap - 2ea Plastic Implant Transfer - 2ea Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Aluminum Implant Analog Replacement Open-Tray Fixation Screw - 2ea Replacement Closed-Tray Fixation Screw - 2ea
4000-13
4000-02
4000-62
4000-63
4000-06
11
GoDirect GoDirect One-Piece Implant System Featuring:
GoDirect Packaging
• One-piece implant with GPS™ & Zest LOCATOR® compatible platform • Tapered, self-tapping body for increased stability in soft bone • 3.0mm narrow diameter implant with 1.8mm apical end allowing insertion with 2.3mmD drill • Double-lead threads for faster insertion plus quadruple-lead mini-threads for reduced stress concentration near crest of bone • Internal threads, capped off with cover screw allows for conversion to multi-unit abutment or fixeddetachable bars or bridges • All-in-1 Packaging includes snap-on transfer & comfort cap
Carrier/Transfer
Snap-On Comfort Cap
3.0mmD Implant
3.7mmD Implant
4.7mmD Implant
Snap-On Comfort Cap and Transfer Use plastic carrier to carry implant
Attach comfort cap to implant
Clinical Applications Attach implant carrier as impression transfer
12
Attach housing for chairside pickup
Locator® is a registered trademark of Zest Anchors Company. The GoDirect™ and GPS™ Systems are neither authorized, endorsed nor sponsored by Zest Anchors Company
GoDirect: One-Piece Implant for One-Stage Surgery GoDirect
SBM Surface Implants 3.0mmD Code 423010 423011 423013 433010 433011 433013
Diameter 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD
Length 10mmL 11.5mmL 13mmL 10mmL 11.5mmL 13mmL
3.7mmD Code 423710 423711 423713 433710 433711 433713
Shoulder Height 1.5mmL 1.5mmL 1.5mmL 3.0mmL 3.0mmL 3.0mmL
423010
423011
423013
433010
433011
433013
423710
423711
423713
433710
433711
433713
In dense bone, use CBD3.7 as final drill
Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD
Length 10mmL 11.5mmL 13mmL 10mmL 11.5mmL 13mmL
4.7mmD Code 424708 424710 424713
Includes Carrier/Transfer & Comfort Cap In dense bone, use CBD3.2 as final drill
Shoulder Height 1.5mmL 1.5mmL 1.5mmL 3.0mmL 3.0mmL 3.0mmL
In dense bone, use CBD4.7 as final drill
Diameter 4.7mmD 4.7mmD 4.7mmD
Length 8mmL 10mmL 13mmL
Shoulder Height 1.5mmL 1.5mmL 1.5mmL 424708
424710
424713
Components for GoDirect Implants on pg 28 Overdenture, Ball & GPS Abutment for GoDirect Implant
Code 4500-61 4500-71 4500-91
Platform 5.0mmD 5.0mmD 5.0mmD
Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]
Collar Heights 1mm 1mm 1mm
4500-61
4500-71
4500-91
Comfort Cap, Transfer, Analog and Alignment Tools
Code 1000-10 4500-06 4500-02 4500-26 1000-97 1000-99
Description Guide Screw for GoDirect Implant - 2ea GoDirect Implant Analog - 1ea GoDirect Implant Transfer - 2ea GoDirect Implant Comfort Cap- 2ea Parallel Post - 4ea Plastic Abutment Angle Measure Guide
1000-99
1000-10
4500-06
4500-02
4500-26
1000-97
GoDirect/GPS Instrumentation
Code GDT GDD GDIT 1000-96
Description GoDirect Implant Driver Tool - (Square connection for use with Ratchet or Torque Wrench) GoDirect Implant Driver Drill - (Latch connection for use with Surgical Motor) GoDirect Implant Tool - (Used with 4.7mmD implant) Core Tool - Male Removal & Seating Tool
GDT
GDD
GDIT
1000-96
13
ScrewRedirect ScrewRedirect One-Piece Implant System featuring:
ScrewRedirect Packaging Carrier
• 12° angled abutment head with contoured margins 1mm above crest of ridge • Single-lead threaded body is 0.3mm shorter than drill length to allow insertion of implant with desired direction of angled head • Double-lead mini-threads near top • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills
4.7mmD Platform
5.7mmD Platform
6.5mmD Platform
ScrewRedirect Implant Placement
3.7mmD Implant
14
4.7mm Implant
5.7mmD Implant
No interference if 1mm clearance
Screw in using 2mm carrier/hex tool
Single lead threads for rotation control
Align angle & contour
Prepare as required
Cement temporary out of occlusion
ScrewRedirect: One-Piece Implant for One-Stage Surgery ScrewRedirect
SBM Surface Implants
Includes Carrier [Requires 2.0mmD Hex Tool]
3.7mmD Code 503713 503716
Diameter 3.7mmD 3.7mmD
Length 13mmL 16mmL
Platform 4.7mmD 4.7mmD
503713
503716
504713
504716
505713
505716
4.7mmD Code 504713 504716
Diameter 4.7mmD 4.7mmD
Length 13mmL 16mmL
Platform 5.7mmD 5.7mmD
5.7mmD Code 505713 505716
Diameter 5.7mmD 5.7mmD
Guide Pin Code 5037-07 5047-07 5057-07
Length 13mmL 16mmL
Platform 6.5mmD 6.5mmD
Use after 2.3mmD Pilot Drill as a guide to ensure clearance & correct implant positioning
Description Guide Pin for 3.7mmD Implant Guide Pin for 4.7mmD Implant Guide Pin for 57mmD Implant 5037-07
5047-07
5057-07
o
12 Angled Abutment Head Double Lead Threads
Compatible with Zimmer’s Tapered Screw-Vent® drills
Single Lead Threads
o
12 angled head of Redirect implant requires minimum of 1mm clearance on either side of implant body to allow for free rotation during implant placement.
15
ScrewPlant & ScrewPlus Fixture-Mount Packaging The implant is mounted on a color-coded fixture-mount designed for use as a transfer & shortened for use as a straight abutment. A snap-on comfort cap is provided for the modified abutment. A cover screw is included in each vial. The ScrewPlant & ScrewPlus also include a 2mm extender retained by the cover screw for use as a healing collar.
Prepare surgical site with double cutting drill
All of Implant Direct’s implants come in a sterile vial
Each label is color-coded with two tear-off labels
Each cap is color-coded by platform diameter of implant
Drop implant assembly out of vial onto a sterile surface
Remove implant assembly with a fixture-mount drill or ratchet
Insert implant into osteotomy
Index fixture-mount flat to labial
Remove the holder containing the cover screw & comfort cap
Snap-on comfort cap is located in the top portion of holder
Flat of hex indexed to buccal
Remove fixture-mount
Align the flat of the fixture-mount to the buccal
Attach fixture-mount to corresponding color-coded implant analog
Remove colored section from fixture-mount through groove creating a final straight abutment
To attach abutment, use 30Ncm in hard bone. In soft bone, use only finger pressure
Test retention & rotate if necessary to increase retention
16
Check for occlusal clearance prior to attaching comfort cap
Suture soft tissue around comfort cap
Clinical & Laboratory Procedures for Contoured Abutments Orienting the 15º Angled Abutment The flat side of the Fixture-Mount/Transfer [Fig. 1] & the angle of the 15° abutment [Fig. 2] are manufactured to align with the flat of the implant’s internal hexagon.
Fig. 2 The two-piece, 15º Angled Abutment consists of an angled body and a Fixation Screw
Fig. 1
Fixture Mount/Transfer
To establish the optimum angle of the abutment, index the flat surface of the Fixture-Mount/Transfer either toward or away from the desired direction of abutment angle at the time of implant placement.
Option 1 : Attaching an Angled Abutment & chairside procedures for preparation Remove the healing collar with a 1.25mmD hex tool
Attach the abutment with the 1.25mmD hex tool
Mark the required modifications to achieve appropriate clearance
Detach the abutment with the 1.25mmD hex tool
Attach the abutment to the corresponding implant analog & reduce the abutment to achieve appropriate clearance
Option 2 : Stage-One transfer followed by laboratory procedures for abutment preparation & provisionalization
During implant placement, index the flat of the fixture-mount
Block out the top of the fixture-mount & make a transfer impression
Attach the cover screw & submerge implant
Attach the fixturemount to the implant analog & seat into the negative of the impression
Pour the working cast in dental stone with soft tissue replication material
Remove the fixturemount from the working cast with the 1.25mmD hex tool
Attach the angled abutment to the implant analog in the working cast with a 1.25mmD hex tool
Modify angle of abutment & refine margins as required
Fabricate the temporary crown
At stage-2 surgery, attach the prepared abutment & tighten to 30 Ncm with a torque wrench
Occlude screw access hole & confirm contour of restoration
Cement the provisional restoration
Common procedures for abutment placement, margin finessing, impressing & placement of restoration Tighten to 30 Ncm with a torque wrench
Finesse the margins with a high-speed bur & copious irrigation prior to final impressing
Make an impression following standard clinical procedures
Attach provisional restoration & cement onto the prepared abutment
Follow standard laboratory procedures to fabricate the final restoration & cement onto the prepared abutment
17
ScrewIndirect Implant Prosthetic Technique
4000-69
1000-01 1000-05
1000-10
1. Use a forceps to remove the comfort caps exposing the tops of the implants.
2. Select the Titanium Temporary Coping matching the prosthetic platform. Titanium Coping [4000-69] is supplied with fixation screws [1000-01] and [1000-05]. An optional longer screw [1000-10] is also available.
3. Place the fixation screw through the coping & tighten using the 1.25mmD Hex Tool. Standard torque value for fixation screws is 30Ncm.
4. Confirm there is less than 40 degrees of relative divergence between copings to be splinted together.
5. Mark top of Titanium Temporary Copings with indelible marker. Place denture on top of copings to transfer their position to under surface of denture.
6. Confirm markings on under surface of denture. Use acrylic trimmer to drill holes through denture corresponding to marked positions.
7. Seat denture over Titanium Temporary Copings to confirm passive placement. Mark copings to indicate required vertical reduction prior to luting to denture base.
8. Occlude screw access hole with cotton pellet. Use autopolymerizing acrylic or similar light cure material to attach prosthesis to Titanium Temporary Copings. Allow to set prior to removal from mouth.
9. Remove prosthesis from the mouth and flip over to expose tissue side. Use additional autopolymerizing resin to fill in any voids around the processed copings.
10a & b. Attach implant replicas to copings and tighten using 1.25mmD Hex Tool. Pour a working cast using a soft tissue replication material if required due to anatomical undercuts.
11. Remove prosthesis from working cast and trim to allow access for patient cleaning. The prosthesis is now a fixed restoration, removable by clinician only.
12. Attach prosthesis to implants & tighten in place using the appropriate tooling. Occlude screw access holes with material of choice.
18
GoDirect Implant GPS Attachment Prosthetic Technique
Tissue height Tissue height Bone height
Bone height
1. Use the black plastic component to carry the GoDirect implant to site. Initiate self-tapping of implant into osteotomy by rotating black carrier. Remove black plastic carrier once implant is stabilized.
2. Use either the [GDT] or [GDIT for 4.7mmD] insertion tool or [GDD] insertion drill to rotate the GoDirect implant into the osteotomy. Stabilize the assembly with downward finger pressure.
3. The gold colored section of the implant should extend a minimum of 1.5mm above the soft tissue.
4. Attach the Parallel Posts [1000-97] to the implants to determine the divergence If the relative divergence between two assemblies is less than 20° use the white, red, orange or green GPS Male.
05a. Chairside Process: Place the White BlockOut Spacer over the head of the implant. Attach the metal cap with Black Processing Male from Processing Cap/Kit [1000-98S] or [1000-98SI].
5b. Chairside Process: Mark location of components on under surface of prosthesis. Relieve the areas within the prosthesis so it can be fully seated over the metal cap without interference. Process the cap into denture following standard procedures.
6a. Transfer Process: Place the Impression Coping [4500-02] onto the implant. Inject impression material around the coping & record a full-arch impression.
6b. Laboratory Procedure: Insert the Implant Analogs [4500-06] into the Impression Copings [4500-02]. The laboratory fabricates the working cast.
7. Place the white Block-Out Spacer over the head of the Implant Analog. Attach the metal cap with Black Processing Male. Process the denture following standard procedures.
8. Pull on the Black Processing Male at an angle & remove it from the metal cap. If needed, wedge a tool against the bottom inside of the black plastic to aid in removal.
9. Use the Male Seating Tool to firmly push the Replacement Male of choice into the empty metal cap located within the denture.
10. Insert the finished prosthesis. Instruct patient on standard cleaning instructions.
19
ScrewPlant/ScrewPlus Selection Chart
3.7mmD Platform
4.7mmD
Fixture Mount ScrewPlant
Fixture Mount ScrewPlus
Fixture Mount ScrewPlant
Cover Screws, Healing Collars, Implant Transfers & Analogs 1037-01
1037-13 1037-13N
Straight Abutments, Comfort Caps, Transfers & Analogs
Engaging & Non-Engaging Abutments
1037-05 1037-05N
1037-08 1037-08N
1037-06
1047-01
1047-13 1047-13N
1047-15 1047-15N
1037-31 1037-32
1037-21
1037-40
1037-23
1037-51-15C 1037-51-08C 1037-30L 1037-52-15C 1037-52-08C
1037-51 1037-52
1037-46
1037-71
1037-22
3037
3037-02
1037-31C 1037-32C
1047-05 1047-05N
3047-26
3037-26
1037-21N 1037-22N
Straight & Angled Contoured & Laboratory Abutments
1037-15 1037-15N
1037-47
1037-72
1037-49
1037-73
1047-21N 2047-20 1047-22N
1047-31 1047-32
3047-02
1047-31C 1047-32C
1047-40
1037-74
3047
1047-51 1047-52
1047-51-15C 1047-52-15C
1047-46
1047-71
1047-72
1047-61
1047-62
Ball, Screw-Receiving & GPS Abutments 1037-61
1037-91
20
1037-92
1037-62
1037-93
1037-64
1037-94
1037-95
1047-91
1047-92
1047-93
Platform
5.7mmD Platform
Fixture Mount ScrewPlus
1047-06
1047-08 1047-08N
6.5mmD Platform
Fixture Mount ScrewPlant
1057-01
Fixture Mount ScrewPlus
1057-13
1057-15
1057-05
1057-08
1057-06
Fixture Mount ScrewPlus
2065-01
2065-13
3057-26
1047-21
1047-22
1047-23
1047-30L
1057-21
2057-20
1047-47
1047-49
1047-73
1047-74
1047-64
1047-94
1047-95
1057-31
1057-71
1057-61
1057-92
1057-22
1057-23
2065-08
2065-06
2065-20 3065-02
3057
1057-32
1057-40
2065-05
3065-26
3057-02
1047-51-08C 1047-52-08C
2065-15
1057-51
1057-46
1057-72
1057-52
1057-47
1057-73
1057-62
1057-93
1057-94
3065
1057-30L
1057-49
2065-40
2065-46
2065-47
2065-49
1057-74
1057-64
1057-95
21
Cover Screws, Healing Collars, Transfers & Analogs Replacement Surgical Cover Screws
Code 1037-01 1047-01 1057-01 2065-01
Requires 1.25mmD Hex Tool
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
Healing Collars
Code 1037-13N 1037-13 1037-15N 1037-15 1047-13N 1047-13 1047-15N 1047-15 1057-13 1057-15 2065-13 2065-15
1047-01
1037-13N
1047-13N
1037-13
1047-13
1037-15N
1047-15N
1037-15
1047-15
1057-01
2065-01
1057-13
2065-13
1057-15
2065-15
Requires 1.25mmD Hex Tool
Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 6.5mmD 6.5mmD
Width 3.8mmD 4.8mmD 3.8mmD 4.8mmD 4.8mmD 5.8mmD 4.8mmD 5.8mmD 6.6mmD 6.6mmD 7.4mmD 7.4mmD
Closed-Tray Implant Transfers
Code 1037-05N 1037-05 1047-05N 1047-05 1057-05 2065-05
Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 6.5mmD
Length 3mmL 3mmL 5mmL 5mmL 3mmL 3mmL 5mmL 5mmL 3mmL 5mmL 3mmL 5mmL
Includes Fixation Screw
Replacement Screw 1000-06 1000-06 1000-06 1000-06 1000-06 1000-06
Open-Tray Implant Transfers
Code 1037-08N 1037-08 1047-08N 1047-08 1057-08 2065-08
1037-01
1037-05N
1037-05
1057-05
1047-05N
1047-05
2065-05
1037-08N
1037-08
1057-08
1047-08N
1047-08
2065-08
1057-06
2065-06
1000-06
Includes Fixation Screw
Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 6.5mmD
Replacement Screw 1000-10 1000-10 1000-10 1000-10 1000-10 1000-10
1000-10
Implant Analogs
Code 1037-06 1047-06 1057-06 2065-06
22
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
1037-06
1047-06
Straight Abutments, Snap-on Transfers and Lab Analogs Straight Abutments
Code 1037-21N 1037-22N 1037-21 1037-22 1037-23 2047-20 1047-21N 1047-22N 1047-21 1047-22 1047-23 2057-20 1057-21 1057-22 1057-23 2065-20
Includes Transfer, Comfort Cap & Fixation Screw [1000-01]
Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 6.5mmD
Collar Heights 1mm 2mm 1mm 2mm 3mm 0mm 1mm 2mm 1mm 2mm 3mm 0mm 1mm 2mm 3mm 0mm
Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD
1047-21N
1037-22N
1047-22N
1037-21
1047-21
1057-21
2047-20
1037-22
1047-22
1057-22
2057-20
1037-23
1047-23
1057-23
2065-20
Code 3037-26 3047-26 3057-26 3065-26
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
3047-02
3057-02
3065-02
3037-26
3047-26
3057-26
3065-26
3037
3047
3057
3065
3037-28
3047-28
3057-28
3065-28
Includes Castable Coping
Straight Abutment Analogs
Code 3037 3047 3057 3065
3037-02
Includes two pieces
Straight Abutment Comfort Caps
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
Includes two pieces
Straight Abutment Castable Copings
Code 3037-28 3047-28 3057-28 3065-28
1037-21N
Includes two pieces
Straight Abutment Transfers
Code 3037-02 3047-02 3057-02 3065-02
Use Analog 3037 3037 3047 3047 3047 3047 3047 3047 3057 3057 3057 3057 3065 3065 3065 3065
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
23
Straight & Angled Contoured, Titanium & Zirconia Abutments Straight Titanium Contoured Abutments
Code 1037-31 1037-32 1047-31 1047-32 1057-31 1057-32
Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD
Includes Fixation Screw [1000-01]
Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm
Straight Zirconia Contoured Abutments
Code 1037-30CB 1037-31C 1037-32C 1047-30CB 1047-31C 1047-32C
Platform 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD
Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD
Collar Heights .5mm 1.5mm 2.5mm .5mm 1.5mm 2.5mm
Angulation 15° 15° 15° 15° 15° 15°
8° & 15° Zirconia Contoured Abutments
Code 1037-51-08C 1037-51-15C 1037-52-08C 1037-52-15C 1047-51-08C 1047-51-15C 1047-52-08C 1047-52-15C
24
Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD
Angulation 8° 15° 8° 15° 8° 15° 8° 15°
1047-31
1057-31
1037-32
1047-32
1057-32
1037-30CB
1037-31C
1037-32C
1047-30CB
1047-31C
1047-32C
1037-51
1047-51
1057-51
1037-52
1047-52
1057-52
Includes Fixation Screw [1000-01]
Angled Titanium Contoured Abutments
Code 1037-51 1037-52 1047-51 1047-52 1057-51 1057-52
1037-31
Includes Fixation Screw [1000-01]
Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm
Includes Fixation Screw [1000-01]
Collar Heights 1.5mm 1.5mm 2.5mm 2.5mm 1.5mm 1.5mm 2.5mm 2.5mm
1037-51-08C
1037-51-15C
1037-52-08C
1037-52-15C
1047-51-08C
1047-51-15C
1047-52-08C
1047-52-15C
Lab, Engaging & Non-Engaging Abutments Full Contour Platform Switching Abutments
Code 1037-30L 1047-30L 1057-30L
Platform 3.7mmD 4.7mmD 5.7mmD
Includes Fixation Screw [1000-01]
Collar Heights 1mm 1mm 1mm
Gold Engaging Cast-to Abutments
Code 1037-40 1047-40 1057-40 2065-40
1047-30L
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
Collar Heights 1mm 1mm 1mm 1mm
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD GoDirect Implant only
1037-40
1047-40
1057-40
Collar Heights 0mm 0mm 0mm 0mm 0mm
Plastic Engaging Temporary Abutments
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
1037-46
1047-46
Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD
Collar Heights 0mm 0mm 0mm 0mm
4500-46
1037-47
1047-47
1057-47
2065-47
1037-49
1047-49
1057-49
2065-49
Includes Fixation Screw [1000-01]
Collar Heights 0mm 0mm 0mm 0mm Includes two pieces
Replacement Fixation Screws
Code 1000-01 1000-06 1000-10
1057-46
Includes Fixation Screw [1000-06]
Titanium Non-Engaging Temporary Abutments
Code 1037-49 1047-49 1057-49 2065-49
2065-40
Includes Fixation Screw [1000-01]
2065-46
Code 1037-47 1047-47 1057-47 2065-47
1057-30L
Includes Fixation Screw [1000-01]
Plastic Non-Engaging Castable Abutments
Code 1037-46 1047-46 1057-46 2065-46 4500-46
1037-30L
Description Short Fixation Screw Fixation Screw Long Fixation Screw
Closed-Tray Transfer & Temporary Abutment
Open-Tray Transfer & Waxing Screw
Abutments
1000-01
1000-06
1000-10
25
Selection Chart: Overdenture & Screw-Retained Restorations 3.7mmD Platform
4.7mmD Platform
5.7mmD Platform
6.5mmD Platform
Screw-Receiving Overdenture Abutments (*Includes Transfer and Comfort Cap) 1037-61 1037-62 1037-64
Overdenture Abutments
1047-61 1047-62 1047-64
1057-61 1057-62 1057-64
Screw-Receiving Overdenture Abutment Transfers, Analog & Comfort Cap Open-Tray Transfer
OD Abutment Comfort Cap Transfers & Analog *4000-13
*1000-68
1000-61
Closed-Tray Transfer
1000-62
1000-63
Overdenture Screw-Retained Copings Overdenture Abutment Components
1000-64
1000-65
Gold
1000-66
Titanium
Plastic
1000-67
Gold/Plastic
1000-69
Titanium
Ball Abutments (**Includes Transfer and Comfort Cap) 1037-71 1037-72 1037-73 1037-74
Ball Abutments
1047-71 1047-72 1047-73 1047-74
1057-71 1057-72 1057-73 1057-74
Ball Attachments
Ball Abutment Components **1000-87
**1000-84
1000-85
1000-81
1000-82
1000-88
1000-83
1000-86
GPS Abutments (***Includes Transfer, Abutment Housing Kit and Comfort Cap) GPS Abutments
1037-91 1037-92 1037-93 1037-94 1037-95
1047-91 1047-92 1047-93 1047-94 1047-95
1057-92 1057-93 1057-94 1057-95
GPS Attachments
GPS Abutment Components ***4500-26 ***1000-94
26
1000-95
1000-92C
1000-92G
1000-92R
1000-92E
1000-92P
1000-92B
1000-92W
1000-93
***1000-91
1000-98S
1000-98SI
1000-96
Screw-Receiving, Ball & GPS Abutments Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]
Screw-Receiving Overdenture Abutments
Code 1037-61 1037-62 1037-64 1047-61 1047-62 1047-64 1057-61 1057-62 1057-64
Platform 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD
Collar Heights 1mm 2mm 4mm 1mm 2mm 4mm 1mm 2mm 4mm
Ball Abutments
Code 1037-71 1037-72 1037-73 1037-74 1047-71 1047-72 1047-73 1047-74 1057-71 1057-72 1057-73 1057-74
GPS Abutments
Code 1037-91 1037-92 1037-93 1037-94 1037-95 1047-91 1047-92 1047-93 1047-94 1047-95 1057-92 1057-93 1057-94 1057-95 4000-92 2000-92
1037-61
1037-62
1037-64
1047-61
1047-62
1047-64
1057-61
1057-62
1057-64
Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]
Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD
Collar Heights 1mm 2mm 3mm 4mm 1mm 2mm 3mm 4mm 1mm 2mm 3mm 4mm
1037-71
1037-72
1037-73
1037-74
1047-71
1047-72
1047-73
1047-74
1057-71
1057-72
1057-73
1057-74
Includes Transfer, Comfort Cap, GPS Abutment Housing Kit, & Clear Male Liner [Requires 1.25mmD Hex Tool] *Abutment only
Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD
Collar Heights 1mm 2mm 3mm 4mm 5mm 1mm 2mm 3mm 4mm 5mm 2mm 3mm 4mm 5mm 2mm
1037-91
1037-92
1037-93
1037-94
1037-95
1047-91
1047-92
1047-93
1047-94
1047-95
1057-92
1057-93
1057-94
1057-95
ScrewIndirect GPS Abutment GPS Bar Abutment with M2 thread—2 ea*
4000-92
2000-92
27
Ancillary Components for Overdenture & Screw-Retained Restorations Overdenture Abutment Comfort Cap, Transfers & Analog
Code 1000-61 1000-62 1000-63 1000-68 4000-13 1000-14 1000-15
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -
Description Aluminum Analog Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Plastic Abutment Transfer - 2ea Plastic Comfort Cap - 2ea Replacement Open-Tray Fixation Screw - 2ea Replacement Closed-Tray Fixation Screw - 2ea
Overdenture Abutment Components
Code 1000-64 1000-65 1000-66 1000-67 1000-69 1000-05
Screws require 1.25mmD Hex Tool
Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -
1000-61
1000-62
1000-63
1000-68
4000-13
Includes Fixation Screw [1000-05]
Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping Coping Fixation Screw - 2ea
1000-05
1000-64
1000-65
1000-66
1000-67 1000-69
Ball Abutment Components
Code 1000-81 1000-82 1000-83 1000-84 1000-85 1000-86 1000-87 1000-88
Description Ball Abutment Housing - 2ea Nylon Liner - 2ea Nylon Liner Transfer - 2ea Ball Abutment Transfer - 2ea Ball Abutment Analog Ball Abutment Tools Ball Abutment Comfort Cap - 2ea Ball Abutment Housing & Nylon Liner
1000-81
1000-82
1000-83
1000-84
1000-85
1000-87
1000-86
1000-88
GPS Abutment Transfer, Analogs & Alignment Tools
Code 1000-94 1000-95 1000-97 1000-10 4500-26 1000-99
Description Impression Coping - 2ea Abutment Analog 4mmD - 2ea Abutment Parallel Post - 4ea Guide Screw for ScrewPlant/ScrewPlus - 2ea Comfort Cap - 2ea Plastic Abutment Angle Measure Guide
4500-26
1000-97
1000-10 1000-94
1000-99
1000-95
GoDirect & GPS Abutment Components
Code 1000-92W 1000-92P 1000-92B 1000-92C 1000-92G 1000-92E 1000-92R 1000-91 1000-93 1000-98SI 1000-98S
Retention Force 5.0lbs 3.0lbs 1.5lbs 4.5lbs 3.0lbs 2.0lbs 1.0lb Assorted Assorted
Description Internal Replacement Male White - 4ea Internal Replacement Male Pink - 4ea Internal Replacement Male Blue - 4ea External Replacement Male Clear - 4ea External Replacement Male Green - 4ea External Replacement Male Orange - 4ea External Replacement Male Red - 4ea GPS Abutment Housing Kit - 1ea Black Processing Male - 4ea Internal Processing Cap/Male Kit - 1ea External Processing Cap/Male Kit - 1ea
1000-92W
1000-93
1000-92C
1000-92G 1000-92P 1000-92E
1000-92B
1000-98SI
1000-92R
GPS Instrumentation
Code 1000-96
28
Description Core Tool - Male Removal & Seating Tool
1000-91
1000-96
1000-98S
Surgical & Prosthetic Instruments Tapered Hex Tools
Code THT1.25 THT1.25S
Description 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short
Straight Hex Tools
Code HT1.25L HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S
THT1.25
THT1.25S
Square connection for use with Ratchet or Torque Wrench
Description 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Short (For use with Torque Wrench) 2.0mmD Straight Hex Tool Long 2.0mmD Straight Hex Tool Short 2.5mmD Straight Hex Tool Long (with retentive O-ring) 2.5mmD Straight Hex Tool Short (with retentive O-ring) 3.0mmD Straight Hex Tool Long 3.0mmD Straight Hex Tool-Short
Hex Drills
HT1.25
HT2.0
HT2.5
HT3.0
HT1.25S
HT2.0S
HT2.5S
HT3.0S
HT1.25L
Latch head connection for use with Surgical Motor
Code HD1.25 HD2.0 HD2.5 HD3.0
Description 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill (with retentive O-ring) 3.0mmD Hex Drill
HD1.25
HD2.0
HD2.5
HD3.0
R
TW30
TW35
SSH2.5
FMD
PAR
LDRILL
DE
Ancillary Instruments
Code R TW30 TW35 SSH2.5 FMD PAR LDRILL DE TWM ABH
Description Ratchet 30Ncm Torque Wrench 35Ncm Torque Wrench 2.5mmD Stainless Steel Handle (with retentive O-ring) Fixture Mount Drill (with retentive O-ring) Paralleling Tool 2.8/2.3 Locator Drill (2.3mmD) Drill Extender Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) Analog Holder
TWM
ABH
Surgical Trays
Code ST BST CST
Description Empty Surgical Kit for Spectra System Implants Basic Surgical Kit for Spectra System Implants Complete Surgical Kit for Spectra System Implants
ST
BST
CST
29
Surgical Drills 3.0mmD Implants
Code SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2
SD2.3
30
CBD3.7
SD3.8
SD3.8S
CBD4.2
SD4.4
SD4.4S
CBD4.7
SD4.8
SD4.8S
CBD5.2
D5.1S
SD5.4
SD5.4S
Description 4.8/4.4mmD Step Drill with 6-16 markings 4.8/4.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.2mmD Implants
5.7mmD Implants
Code D5.1 D5.1S SD5.4 SD5.4S CBD5.7
SD3.4S
Description 4.4/3.8mmD Step Drill with 6-16 markings 4.4/3.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.7mmD Implants
Optional Drills
Code SD4.8 SD4.8S CBD5.2
SD3.4
CBD3.2
Description 3.8/3.4mmD Step Drill with 6-16 markings 3.8/3.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.2mmD Implants
4.7mmD Implants
Code SD4.4 SD4.4S CBD4.7
SD2.8S
Description 3.4/2.8mmD Step Drill with 6-16 markings 3.4/2.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.7mmD Implants
Optional Drills
Code SD3.8 SD3.8S CBD4.2
SD2.8
Description 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings 2.8/2.3mmD Step Drill with 6-16 markings 2.8/2.3mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.0 and 3.2mmD Implants
3.7mmD Implants
Code SD3.4 SD3.4S CBD3.7
SD2.3S
D5.1
Description 5.1mmD Straight Drill with 6-16 markings 5.1mmD Straight Drill with 6-10 markings 5.4/4.8mmD Step Drill with 6-16 markings 5.4/4.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.7mmD Implants
CBD5.7
Spectra System Drill Seque nce 3.0mmD Tapered Implant Body Soft Bone Final
Dense Bone Final
Optional Bone Contour
CBD3.2
SD2.3
SD2.8
2.3/2.0mmD
2.8/2.3mmD
Soft Bone Final
Dense Bone Final
Optional Bone Contour
CBD3.7
3.7mmD Tapered Implant Body
SD2.3
SD2.8
SD3.4
2.3/2.0mmD
2.8/2.3mmD
3.4/2.8mmD
Soft Bone Final
Dense Bone Final
Optional Bone Contour
CBD4.7
4.7mmD Tapered Implant Body Optional
SD2.3
SD2.8
SD3.4
SD3.8
SD4.4
2.3/2.0mmD
2.8/2.3mmD
3.4/2.8mmD
3.8/3.4mmD
4.4/3.8mmD
Soft Bone Final
Dense Bone Final
Optional Bone Contour
CBD5.7
5.7mmD Tapered Implant Body Optional
Optional
Optional
SD2.3
SD2.8
SD3.4
SD3.8
SD4.4
SD4.8
D5.1
SD5.4
2.3/2.0mmD
2.8/2.3mmD
3.4/2.8mmD
3.8/3.4mmD
4.4/3.8mmD
4.8/4.4mmD
5.1mmD
5.4/4.8mmD
31
32
HT1.25S
HD1.25
THT1.25S
FMD
R
HD2.0
HT2.0S
HT2.0
SD2.8S
SSH2.5
SD2.8
HT1.25
SD2.3S
THT1.25
SD2.3
HT3.0S
HD3.0
HD2.5
HT3.0
SD3.4
HT2.5S
HT2.5
CBD3.2 SD3.4S
SD3.8
SD3.8S CBD4.2
Lower level of surgical tray
CBD3.7 SD4.4
SD4.4S CBD4.7
SD4.8
SD4.8S
SD5.4S
D5.1
PAR (4)
LDRILL
SD5.4
CBD5.2
DE
CBD5.7
D5.1S
Complete Surgical Tray Contents
Surgical Tray
Lid
Code ST SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD5.4 SD5.4S CBD5.7 THT1.25 THT1.25S HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S HD1.25 HD2.0 HD2.5 HD3.0 FMD LDRILL DE R PAR (x4) SSH2.5
Surgical Tray Contents Description Empty Surgical Tray 2.3/2.0mmD Step Drill-Long 2.3/2.0mmD Step Drill-Short 2.8/2.3mmD Step Drill-Long 2.8/2.3mmD Step Drill-Short 3.2mmD Cortical Drill 3.4/2.8mmD Step Drill-Long 3.4/2.8mmD Step Drill-Short 3.7mmD Cortical Drill 3.8/3.4mmD Step Drill-Long 3.8/3.4mmD Step Drill-Short 4.2mmD Cortical Drill 4.4/3.8mmD Step Drill-Long 4.4/3.8mmD Step Drill-Short 4.7mmD Cortical Drill 4.8/4.4mmD Step Drill-Long 4.8/4.4mmD Step Drill-Short 5.2mmD Cortical Drill 5.1mmD Straight Drill-Long 5.1mmD Straight Drill-Short 5.4/4.8mmD Step Drill-Long 5.4/4.8mmD Step Drill-Short 5.7mmD Cortical Drill Hex Tools 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short 1.25mmD Straight Hex Tool-Long 1.25mmD Straight Hex Tool-Short 2.0mmD Straight Hex Tool-Long 2.0mmD Straight Hex Tool-Short 2.5mmD Straight Hex Tool-Long 2.5mmD Straight Hex Tool-Short 3.0mmD Straight Hex Tool-Long 3.0mmD Straight Hex Tool-Short 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill 3.0mmD Hex Drill Ancillary Instrumentation Fixture Mount Drill Locator Drill Drill Extender Ratchet Paralleling Tool 2.8/2.3 2.5mmD Stainless Steel Handle
Empty Tray
Inside
Complete Kit
Basic Kit
Conversion Kit
X X X X X X X X X X X X X X X X X X X X X X X
X X
X
X X X X X X X X X X X X X X
X
X X X X X X
X X X
X
X X X X
X
X
X X X X
X X X
X X X X X X X X
X X X X
33
Designed For Success, Packaged For Value
Customer Service & Technical Support online, over the phone, or in your office
Reality Check Zimmer Customers
ScrewPlant® and ScrewPlus® Implants
Comfort Cap
Cover Screw
Healing Collar
All-in-1 Packaging includes implant, abutment, transfer, cover screw, healing collar & comfort cap
ScrewPlant and ScrewPlus Implant Advantages: Internal Hex with External Bevel Internal Hex connection prevents rotation of prosthetic components External Bevel for added support
ScrewPlant
ScrewPlus
Bone Level 2-Stage
Tissue Level 1-Stage
Surgical Compatibility with Tapered Screw-Vent® No need to change surgical protocol or tools
Micro-Threads Reduce crestal stress for improved initial stability
Double-Lead Threads For faster insertion with Standard “V” threads matching Screw-Vent®
Tapered Body Facilitates soft bone expansion
www.implantdirect.com | 888-649-6425 All trademarks are property of their respective companies.
*5-01-12-0045*
5K-01-12-0045i Printed in the U.S.A. Copyright © 2011 Implant Direct Sybron International. All Rights Reserved