AkyDrive™ Interior
Strength and Durability for effective reinforcement Reinforcement and protection components designed to reduce vehicle weight the requirements of the automotive sector perfectly and contributes to reducing fuel consumption and CO2 emissions.
Optimum weight/ stability ratio
Low tooling cost for cutting
100% recyclable
AkyDrive™ Interior
AkyDrive Interior meets
AkyDrive™ Interior
The combination of lightness and strength means AkyDrive Interior is ideally suited for making boot floors, reinforcement components and soundproofing materials. Soundproofing material
Trunk floor
Choice of finishes
Battery protection
Seat reinforcement
Technical Characteristics
Method
D8 1000
D8 1300
D8 1500
D8 2000
Thickness (mm)
Internal
4.9
5.2
5.4
6.2
Grammage (g/m²)
Internal
1000
1300
1500
2000
5.4
8.4
8.9
14.4
605
815
537
845
500 g steel ball Fall height: 250 mm
No effect
No effect
No effect
No effect
FMVSS 302
< 10
< 10
< 10
< 10
Flexural strength (MPa) Flexural modulus (MPa) I mpact resistance (N.cm) at 23°C and -30°C
50 x 150 mm specimen
FMVSS (cm/min) Applications rammage (g/m²)/ G Thickness (mm)
D4
600 2.9
1000 3.4
Seat reinforcement Soundproofing material
Non-woven PP
Laminating of specific materials on request
D8
800 3.2
Non-woven PES
2000 4.4
1000 4.9
1300 5.2
1500 5.4
1800 5.8
2000 6.2
Trunk floor
Welded edges
NB: Quality options according to specific specifications
www.dssmith.com/akydrive
The information contained in this document is for information purposes and is non-contractual. The manufacturer reserves the right to change the product and its technical characteristics. This information has been supplied in good faith and does not in any way constitute a guarantee on our part for specific conditions of use. DS SMITH PLASTICS FRANCE - SAS with capital of 49,037,000 euros - 75 route de Lapoutroie, F 68240 KAYSERSBERG - COLMAR COMPANY REGISTER B 519 011 878 DRIVE 232 GB 01/2019 ©2018 DS Smith, Plastics Division, Extruded Products, EU All Rights Reserved