Talking pen test report by Dwinguler

Page 1 of 21

EMC TEST REPORT For SHENZHEN NOBLE LIVING GOODS CO., LTD. DWINGULER TALKING PEN Model No.: DW-TP13-1 Test Report Number : ESTSZ130301216E

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD 4/F, 7th Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China Tel:+86-755-26648640 Fax:+86-755-26648637

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 2 of 21 TABLE OF CONTENTS 1. GENERAL INFORMATION......................................................................................................................... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................................ 3 1.2 TEST STANDARDS ....................................................................................................................................................... 3 1.3 TEST SUMMARY .......................................................................................................................................................... 4 1.4 TEST METHODOLOGY .................................................................................................................................................. 4 1.5 TEST FACILITY ............................................................................................................................................................ 4 1.6 TEST EQUIPMENT LIST AND DETAILS ............................................................................................................................. 5 2. SYSTEM TEST CONFIGURATION ............................................................................................................ 7 2.1 JUSTIFICATION ............................................................................................................................................................ 7 2.2 EUT EXERCISE SOFTWARE.......................................................................................................................................... 7 2.3 SPECIAL ACCESSORIES ............................................................................................................................................... 7 2.4 EQUIPMENT MODIFICATIONS......................................................................................................................................... 7 2.5 CONFIGURATION OF TEST SYSTEM ............................................................................................................................... 7 2.6 TEST SETUP DIAGRAM................................................................................................................................................. 7 3. RADIATED DISTURBANCES .................................................................................................................... 8 3.1 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 8 3.2 LIMIT OF RADIATED DISTURBANCES (EN55022) ............................................................................................................ 8 3.3 EUT SETUP ............................................................................................................................................................... 8 3.4 TEST RECEIVER SETUP ............................................................................................................................................... 8 3.5 TEST PROCEDURE ...................................................................................................................................................... 9 3.6 RADIATED EMISSIONS TEST RESULT ............................................................................................................................. 9 3.7 TEST RESULT ............................................................................................................................................................. 9 4. EN 55024 MEASUREMENT INSTRUMENTATION ................................................................................. 12 4.1 ELECTROSTATIC DISCHARGE TEST SYSTEM................................................................................................................. 12 4.2 RADIATED SUSCEPTIBILITY TEST SYSTEM .................................................................................................................... 12 5. EN 55024 TEST PROCEDURES .............................................................................................................. 13 5.1 EUT AND CABLE PLACEMENT..................................................................................................................................... 13 5.2 APPLICATION OF ELECTROSTATIC DISCHARGE IMMUNITY TEST ...................................................................................... 13 5.3 APPLICATION OF RADIATED SUSCEPTIBILITY TEST ........................................................................................................ 13 6. TEST DATA............................................................................................................................................... 14 6.1 ELECTROSTATIC DISCHARGE IMMUNITY TEST (IEC 61000-4-2) .................................................................................... 14 6.2 RADIATED SUSCEPTIBILITY TEST (IEC 61000-4-3) ...................................................................................................... 15 7. TEST RESULTS ........................................................................................................................................ 16 7.1 IEC 61000-4-2 ELECTROSTATIC DISCHARGE IMMUNITY TEST CONFIGURATION .............................................................. 16 7.2 IEC 61000-4-3 RADIATED SUSCEPTIBILITY TEST CONFIGURATION ................................................................................ 16 APPENDIX A. EUT PHOTOGRAPHS .......................................................................................................... 17 EUT - OVERALL VIEW ..................................................................................................................................................... 17 EUT - BACK VIEW .......................................................................................................................................................... 17 APPENDIX A. EUT PHOTOGRAPHS .......................................................................................................... 18 EUT - INSIDE VIEW ......................................................................................................................................................... 18 EUT - INSIDE VIEW ......................................................................................................................................................... 18 APPENDIX A. EUT PHOTOGRAPHS .......................................................................................................... 19 APPENDIX B. TEST SETUP PHOTOGRAPHS ........................................................................................... 20 RADIATED EMISSION ....................................................................................................................................................... 20 RADIATED SUSCEPTIBILITY TEST ...................................................................................................................................... 20 ELECTROSTATIC DISCHARGE IMMUNITY TEST .................................................................................................................... 21

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 4 of 21

1.3 Test Summary For the EUT described above. The standards used were EN55022 for Emissions & EN 55024 for Immunity.

Table 1: Tests Carried Out Under EN55022: 2010 Standard EN55022: 2006+ A1: 2007+A2: 2010

√ ×

Test Items Radiated Disturbances (30MHz To 1000MHz)

Status √

Indicates that the test is applicable Indicates that the test is not applicable

Table 2: Tests Carried Out Under EN 55024: 2010 Standard

Test Items

Status

IEC61000-4-2: 2008

Electrostatic discharge Immunity

√

IEC61000-4-3: 2008

Radiated Susceptibility (80MHz to 1GHz)

√

√ ×

Indicates that the test is applicable Indicates that the test is not applicable

1.4 Test Methodology All measurements contained in this report were conducted with CISPR 16-1: 2002, Dwinguler Talking Pen disturbance and immunity measuring apparatus, and CISPR16-2: 2002, Method of measurement of disturbances and immunity.

1.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC – Registration No.: 600491 Global United Technology Service Co., Ltd has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 600491

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 5 of 21

1.6 Test Equipment List and Details Table 1: Test Equipment for Emission Test and Harmonic Current / Flicker Test Equipment 3m Semi-Anechoic Chamber EMI Test Receiver EMI Test Software Coaxial cable BiConiLog Antenna Amplifier(100KHz -3GHz) Double-ridged horn Amplifier(2GHz20GHz) Band filter Shielding Room LISN

Manufacturer ZhongYu Electro Rohde & Schwarz AUDIX GTS SCHWARZBECK MESS-ELEKTRONIK HP SCHWARZBECK MESS-ELEKTRONIK HP Amindeon Zhong Yu Electron

ISN

SCHWARZBECK MESS-ELEKTRONIK Rohde & Schwarz

ISN

Rohde & Schwarz

EMI Test Receiver Coaxial Cable AC Power Source Power Analyzer Test software

Rohde & Schwarz GTS EMTEST EMTEST EMTEST

Model# 9.2(L)*6.2( W)*6.4(H) ESU26 E3 N/A VULB9163

Serial # GTS201

Data of Cal . Apr.28, 2012

Due Data Apr.27, 2013

GTS203 N/A GTS400 GTS204

Dec. 12, 2012 N/A Mar. 18, 2013 Mar. 12, 2013

Dec. 11, 2013 N/A Mar. 17, 2014 Mar. 11, 2014

8347A

GTS210

Mar. 18, 2013

Mar. 17, 2014

9120D-829

GTS205

Mar. 12, 2013

Mar. 11, 2014

8349b

GTS224

Mar. 18, 2013

Mar. 17, 2014

82346 7.0(L)x3.0( W)x3.0(H) NSLK 8127 ENY22110 9 ENY41111 0 ESCS30 N/A ACS500 DPA500 ACS

SEL0094 GTS206

Mar. 18, 2013 Apr. 10, 2012

Mar. 17, 2014 Apr. 10, 2013

GTS207

Mar. 18, 2013

Mar. 17, 2014

EMC011 4 EMC011 5 GTS208 GTS207 GTS218 GTS217 N/A

Mar. 18, 2013

Mar. 17, 2014

Mar. 18, 2013

Mar. 17, 2014

Mar. 18, 2013 Mar. 18, 2013 Mar. 27, 2012 Mar. 27, 2012 N/A

Mar. 17, 2014 Mar. 17, 2014 Mar. 26, 2013 Mar. 26, 2013 N/A

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 6 of 21 Table 2: Test Equipment for Immunity Test Equipment ESD Simulator

Manufacturer EMPEK

Tsurge Capacitive Clamp

EMTEST system Thermo ELECTRON ETS-LINDGREN

3m Semi-Anechoic Chamber Signal Generator RF Amplifier 30M1GHz RF Amplifier 0.8M3.0GHz Power Meter Power Meter Power Meter Software EMC32 Log-periodic Antenna Antenna Tripod

Rohde & Schwarz Amplifier Research Amplifier Research Rohde & Schwarz Rohde & Schwarz Rohde & Schwarz Rohde & Schwarz Amplifier Research Amplifier Research ProPLUS System Thermo ELECTRON Pro PLUS Capacitive Thermo Clamp ELECTRON CM-HCOIL H-field Thermo loop ELECTRON RF-Generator SCHAFFNER Coupling/Decoupling SCHAFFNER Network EM CLAMP SCHAFFNER

Model# ESD2030A UCS500N N/A

Serial # GTS219

Data of Cal. Mar. 03, 2013

Due Data Mar. 02, 2014

GTS216 GTS220

Sept. 09, 2012 N/A

Sept. 09, 2013 N/A

N/A

Apr.28, 2012

Apr. 27, 2013

SML03 250W 1000A 60S1G3

SEL0068 SEL0066

Aug. 01, 2012 Apr.28, 2012

Jul. 31, 2013 Apr. 27, 2013

SEL0065

Apr.28, 2012

Apr. 27, 2013

NRVD URV5-Z2 URV5-Z2 EMC32-S AT1080

SEL0069 SEL0071 SEL0072 SEL0082 SEL0073

Mar. 18, 2013 Mar. 18, 2013 Mar. 18, 2013 N/A N/A

Mar. 17, 2014 Mar. 17, 2014 Mar. 17, 2014 N/A N/A

TP1000A

SEL0074

N/A

SEL0007

Dec. 12, 2012

Dec. 11, 2013

N/A

SEL0008

N/A

SEL0010

Dec. 12, 2012

Dec. 11, 2013

NSG2070 SEL0039 CDNM016 SEL0040

Dec. 12, 2012 Dec. 12, 2012

Dec. 11, 2013 Dec. 11, 2013

KEMZ801

SEL0041

Dec. 12, 2012

Dec. 11, 2013

Model# ZJ1-2B

Serial # GTS250

Data of Cal. Apr.28, 2012

Due Data Apr. 27, 2013

DYM3

GTS251

Jun. 22, 2012

Jun. 21, 2013

Table 3: General used equipment Equipment Manufacturer Humidity/Temperature Shanghai Indicator Barometer Changchun

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 7 of 21

2. SYSTEM TEST CONFIGURATION 2.1 Justification The system was configured for testing in a typical fashion (as normally used by a typical user).

2.2 EUT Exercise Software The EUT exercising program used during radiated and conducted testing was designed to exercise the various system components in a manner similar to a typical use. The software offered by manufacture, can let the EUT being normal operation.

2.3 Special Accessories As shown in section 2.5, interface cable used for compliance testing is shielded as normally supplied by SHENZHEN NOBLE LIVING GOODS CO., LTD. and its respective support equipment manufacturers.

2.4 Equipment Modifications The EUT tested was not modified by SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD.

2.5 Configuration of Test System

EUT

Battery

2.6 Test Setup Diagram

EUT Simulater

1.0m

1.5m

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 8 of 21

3. RADIATED DISTURBANCES 3.1 Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement is +4.0 dB.

3.2 Limit of Radiated Disturbances (EN55022) Frequency (MHz)

Distance (Meters)

Field Strengths Limits (dBµV/m)

30 ~ 230

230 ~ 1000

Note: (1) The tighter limit shall apply at the edge between two frequency bands. (2) Distance refers to the distance in meters between the test instrument antenna and the closest point of any part of the E.U.T. (3) If the highest frequency of the internal sources of the EUT is less than 108 MHz, the measurement shall only be made up to 1 GHz.

3.3 EUT Setup The radiated emission tests were performed in the open area 3-meter test site, using the setup accordance with the CISPR 16-1: 2002, CISPR16-2: 2002. The specification used was EN 55022 limits. The EUT was placed on the center of the test table. Maximum emission emitted from EUT was determined by manipulating the EUT, support equipment, interconnecting cables and varying the mode of operation and the levels in the final result of the test were recorded with the EUT running in the operating mode that maximum emission was emitted.

3.4 Test Receiver Setup According to EN55022 rules, the frequency was investigated from 30 to 1000 MHz. During the radiated emission test, the test receiver was set with the following configurations: Test Receiver Setting: Detector…………………………………..Peak & Quasi-Peak IF Band Width……………………….…..120KHz Frequency Range……………………….30MHz to 1000MHz Turntable Rotated……………………….0 to 360 degrees Antenna Position: Height………………………………….…1m to 4m Polarity…………………………………....Horizontal and Vertical

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 9 of 21

3.5 Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. All data was recorded in the peak detection mode. Quasi-peak readings performed only when an emission was found to be marginal (within -10 dBÂľV of specification limits), and are distinguished with a "QP" in the data table.

3.6 Radiated Emissions Test Result Temperature ( â&#x201E;&#x192; ) Humidity ( %RH ) Barometric Pressure ( mbar ) EUT M/N Operating Mode

22 59 1001.0 DWINGULER TALKING PEN DW-TP13-1 On

Test data see following pages Remark: (1) When PK reading is less than relevant limit 20dB, the QP reading and AV reading will not be recorded. (2) Where QP reading is less than relevant AV limit, the AV reading will not be measured

3.7 Test Result Pass.

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 10 of 21 Radiated Emission

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 11 of 21 Radiated Emission

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 12 of 21

4. EN 55024 MEASUREMENT INSTRUMENTATION 4.1 Electrostatic Discharge Test System An simulator is used for all testing. It is capable of applying Electrostatic discharges in both contact discharge modes to 4 kV and air discharge modes to 8 kV in both positive and negative polarities. This is in accordance with the IEC 61000-4-2 basic EMC publication.

4.2 Radiated Susceptibility Test System An signal generator and a Amplifier Research power amplifier are used to provide a signal at the appropriate power and frequency to a transmitting antenna to obtain the required electromagnetic field at the position of the EUT in accordance with the IEC 61000-4-3 basic EMC publication. The field was monitored by Amplifier Research field probe and Amplifier Research PM2002 power meter according the IEC 61000-4-3 standards. In order to judge the performance of the EUT, a set of monitor system is used.

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 13 of 21

5. EN 55024 TEST PROCEDURES 5.1 EUT and Cable Placement The EUT and any peripherals are located at the center of the table for tabletop devices and in the center of the ground plane with the insulating support for floor-standing devices. The standards require that interconnecting cables to be connected to available ports of the unit and that the placement of the unit and the attached cables simulate a typical installation so far as to be practical.

5.2 Application of Electrostatic Discharge Immunity Test The test is conducted in the following order according to the basic standard IEC 61000-4-2: Air Discharge, Direct Contact Discharge, Indirect Contact Horizontal Coupling Plane Discharge, and Indirect Contact Vertical Coupling Plane Discharge. The Electrostatic Discharge test levels are set and discharges for the different test modes are set appropriately. The Electrostatic Discharge is applied to the conductive surface of the computer in which the EUT is enclosed, and along all seams and control surfaces on the computer. When a discharge occurs and an error is caused, the type of error, discharge level and location is recorded.

5.3 Application of Radiated Susceptibility Test The electromagnetic field is established at the front edge of the EUT. The frequency range is swept from 80 to 1000 MHz using a power level necessary to obtain a 3 volt/meter and 80% amplitude of a 1 kHz sine wave modulated field Strength is directed at the EUT. The test is performed with each of four sides of EUT facing the transmitting antenna. If an error is detected when the susceptible side of the EUT facing the transmitting antenna, the field is reduced until the error is not repeatable, the field is then manually increased until the error begins to occur. This threshold level, the frequency and the error created are noted before continuing. Both horizontal and vertical polarization of the antenna are set on test and measured individually

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 14 of 21

6. TEST DATA 6.1 Electrostatic Discharge Immunity Test (IEC 61000-4-2) Temperature ( â&#x201E;&#x192; ) Humidity ( %RH ) Barometric Pressure ( mbar ) EUT M/N Operating Mode

22 58 1001.1 DWINGULER TALKING PEN DW-TP13-1 On

Table 1: Electrostatic Discharge Immunity (Air Discharge) IEC 61000-4-2 Test Points Slots

8 points

Test Levels -2 kV

+2 kV

-4 kV

+4 kV

-6 kV

+6 kV

-8 kV

+8 kV

-15 kV

+15 kV

Table 2: Electrostatic Discharge Immunity (Indirect Contact HCP) IEC 61000-4-2 Test Points

Test Levels -2 kV

+2 kV

-4 kV

+4 kV

-6 kV

+6 kV

-8 kV

+8 kV

-15 kV

+15 kV

Front Side

Back Side

Left Side

Right Side

Table 3: Electrostatic Discharge Immunity (Indirect Contact VCP) IEC 61000-4-2 Test Points

Test Levels -2 kV

+2 kV

-4 kV

+4 kV

-6 kV

+6 kV

-8 kV

+8 kV

-15 kV

+15 kV

Front Side

Back Side

Left Side

Right Side

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 15 of 21

6.2 Radiated Susceptibility Test (IEC 61000-4-3) Frequency Range (MHz): 80~1000MHz Modulation: Amplitude 80%, 1kHz sine wave Severity Level: 3V/m Temperature ( â&#x201E;&#x192; ) Humidity ( %RH ) Barometric Pressure ( mbar ) EUT M/N Operating Mode

Frequency Range (MHz) 80-1000

Front (3 V/m)

22 59 1001.1 DWINGULER TALKING PEN DW-TP13-1 On

Rear (3 V/m)

Left Side (3 V/m)

Right Side (3 V/m)

VERT

HORI

VERT

HORI

VERT

HORI

VERT

HORI

Note: A ----- Performance Criteria A as stated in Section 1.2 of this report B ----- Performance Criteria B as stated in Section 1.2 of this report C ----- Performance Criteria C as stated in Section 1.2 of this report

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 16 of 21

7. TEST RESULTS The following tests were performed on the SHENZHEN NOBLE LIVING GOODS CO., LTD. â&#x20AC;&#x2DC;s product; model: DW-TP13-1; the actual test results are contained within the Test Data section of this report.

7.1 IEC 61000-4-2 Electrostatic Discharge Immunity Test Configuration The EUT was subjected to the electrostatic discharge tests required by EN 55024 and all lower levels specified in IEC 61000-4-2.

The EUT continued to perform as intended during and after the application of the ESD. Test setup photographs presented in Appendix B. 7.2 IEC 61000-4-3 Radiated Susceptibility Test Configuration The EUT was subjected to a 3-volt/meter, 80% Amplitude, 1 kHz Sine wave field as required by EN 55024 and all lower levels specified in IEC 61000-4-3.

The EUT continued to perform as intended during and after the application of the electromagnetic field. Test setup photographs presented in Appendix B.

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 17 of 21

APPENDIX A. EUT PHOTOGRAPHS EUT - Overall View

EUT - Back View

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 18 of 21

APPENDIX A. EUT PHOTOGRAPHS EUT - Inside View

EUT - Inside View

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 19 of 21

APPENDIX A. EUT PHOTOGRAPHS EUT - Inside View

EUT - Inside View

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 20 of 21

APPENDIX B. TEST SETUP PHOTOGRAPHS Radiated Emission

Radiated Susceptibility Test

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

Page 21 of 21

Electrostatic Discharge Immunity Test

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. NO.: ESTSZ130301216E

TEST REPORT

NO.: ESTSZ130305216T

Date: Mar. 21, 2013

Page 2 of 8

Test Results: This report details the clauses appropriate to this item. Those clauses not referred to were considered not applicable. EN 62115:2005+A11:2012 Electric toys â&#x20AC;&#x201C; safety Section

Title

Results

4.1

General Requirement Toys shall be constructed so that they do not jeopardize the safety and /or health of users or third parties. In order to comply with this standard, electric toys also have to comply with EN71.

See comments

See next test report for EN 71-3 5

General Conditions for the tests

5.13

Electrical connections can be made as reversed polarity due to incorrect insertion

Selection of Tests

6.2

Battery toys are considered to comply with clauses 10, 11 (except11.1), 12, 15

Pass -

(except 15.2), 17 (except 17.1 for battery compartments intended to contain button cell batteries), 18 (except the additional distances for computer toys) and 19 if they meet the requirements for reduced testing specified in clause 6.2. This item meets

See comments

the requirements of this clause therefore reduced testing was applied. 7

Marking & Instructions

7.1

Name, Trade Mark Or Identification Mark

Toys or their packaging shall be marked with: z

Warnings & instructions for use under directive 2009/48/EC. The name, registered trade name or registered trade mark and a contact address for an

See comments

importer or distributor within the EU must be indicated on the toy or, where that is not possible, on its packaging or in a document accompanying the toy. 9

Heating & Abnormal Operation

9.3

Normal operating temperature

Electric Strength at Operating Temperature This clause was considered to comply when applying the criteria for reduced testing specified in clause 6.2 (No physical testing conducted).

EST

4/F, 7th Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

comments -

Moisture Resistance

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD.

See

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130305216T

Section

Title

11.2

Resistance To Humidity

Date: Mar. 21, 2013

Page 3 of 8 Results See

This clause was considered to comply when applying the criteria for reduced

comments

testing specified in clause 6.2 (No physical testing conducted). Electric Strength at Room Temperature

This clause was considered to comply when applying the criteria for reduced testing specified in clause 6.2 (No physical testing conducted).

See comments

Mechanical Strength

Pass

Construction

14.1

Voltage Shall Not Exceed 24V

Pass

14.6

Accessibility of button cells and type R1 batteries

Pass

4.11

Non detachable parts

Pass

14.14

Toys Shall Not Contain Asbestos

Visual examination did not reveal any material that resembled asbestos although no specific testing was conducted 15

Protection of Cords & Wires This clause was considered to comply when applying the criteria for reduced testing specified in clause 6.2 (No physical testing conducted).

Components

16.2

Toys shall not be fitted with thermal cut-outs that can be reset by a soldering

Screws & Connections

17.2

Electrical connections carrying a current exceeding 0.5A testing specified in clause 6.2 (No physical testing conducted). Creepage Distances & Clearances This clause was considered to comply when applying the criteria for reduced testing specified in clause 6.2 (No physical testing conducted). Resistance to Heat & Fire This clause was considered to comply when applying the criteria for reduced testing specified in clause 6.2 (No physical testing conducted).

See comments

Pass -

This clause was considered to comply when applying the criteria for reduced

comments

operation; mercury switches shall not be used.

See

See comments See comments See comments

Radiation, Toxicity & Similar Hazards Toys shall not emit harmful radiation or present a toxic or similar hazard due to operation in normal use:

See comments

The toy will need to comply with EN71 part 3, see next test report for EN 71-3

EST

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. 4/F, 7th Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130305216T

Date: Mar. 21, 2013

Page 4 of 8

EN 71-1: 2011 Safety of toys â&#x20AC;&#x201D;Part 1: Mechanical and physical properties 4

General requirements

4.1

Materials

4.7

4.8

4.10

Remarks: No stain

Pass

Remarks: No sharp edge

Pass

Remarks: No sharp point

Pass

Remarks: No hazard

Pass

Edge

Points and wires

Parts moving against each other

Warnings and instructions for use

7.1

Necessary markings Name and / or trade name and/or mark and complete address of the manufacturer or his authorized representative or the

Pass

importer with the CE-marking

* Remark of tests of EN 71- Part 1: * Although no final packaging has been received, the manufacturer/trader/applicant has confirmed that the above information marked (*) will be shown onto the packaging of the toy.

EST

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130305216T

Date: Mar. 21, 2013

Page 5 of 8

EN 71-2: 2011 Safety of toys —Part 2: Flammability 4

General

4.1

Materials Remarks: see below

---

Pass

The following materials shall not be used in the manufacture of toys: — Celluloid (cellulose nitrate), except when used in varnish, paint or glue, or in balls of the type used for table tennis or similar games, and materials with the same

Pass

behaviour in fire as celluloid. — Materials with a piled surface which produce surface flash on the approach of a flame.

Pass

Note: All TEST RESULTS ARE ONLY VALID FOR THE SAMPLES BEING TESTED.

EST

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130305216T

Date: Mar. 21, 2013

Page 6 of 8

EN 71-3: 1994+A1:2000 Safety of toys â&#x20AC;&#x201D; Part 3: Migration of Certain Elements 8

Requirements

8.2

Polymeric and similar materials, including laminates, whether textile reinforced or not, but excluding other textiles

8.5

8.6

Remarks:

Pass

Remarks:

Pass

Glass/ceramic/metallic materials

Other materials whether mass coloured or not Remarks:

Pass

Part 3 of EN 71 is only applicable for toys or parts of toys- under consideration of a foreseen and reasonable use- which based on their function, mass, height or other properties will be put into the childâ&#x20AC;&#x2122;s mouth or if there is a foreseen possibility of sucking and swallowing toys or part of toys.

EST

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130305216T

Date: Mar. 21, 2013

Page 7 of 8

Analysis results: As per European standard on safety of Toys 71 Parts 3: 1994+A1:2000+A1/AC:2000+AC:2002 soluble toxic element contents are determined by inductively coupled plasma â&#x20AC;&#x201C; Atomic Emission Spectrometry. Detection limit: 5.0ppm for Cd, Pb, Cr, Hg, Sb, Ba, Se and 2.5 ppm for As of the 8 soluble toxic elements Testing element

Cadmium

No.

Lead Chromium

Mercury

Antimony

Barium

Arsenic Selenium

(Cr)

(Hg)

(Sb)

(Ba)

(As)

(Se)

(Cd)

(Pb)

1000

500

Limit [mg/kg] 1

White plastic enclosure

<5.0

<2.5

<5.0

Blue plastic base

<5.0

<2.5

<5.0

Blue plastic key

<5.0

<2.5

<5.0

White plastic rubber

<5.0

<2.5

<5.0

Red marking

<5.0

7.5

<5.0

<2.5

<5.0

Note: -

unit: mg/kg=ppm, <=Less than

Results shown are of the adjusted analytical results.

EST

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130305216T

Date: Mar. 21, 2013

Page 8 of 8

SAMPLE PHOTO:

ESTSZ130305216T

Dwinguler Talking Pen EST authenticate the photo on original report only ***** End of Report *****

EST

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130302216R

Date: Mar. 21, 2013

Page 2 of 16

TEST RESULTS: Part No.

5-1

5-2

5-3

EST

Part Name

White plastic enclosure

Silvery metal spring

Silvery metal sheet

Golden metal

Black plastic (DC power jack)

Copper metal (in No. 5-1)

Silvery metal pin (in No. 5-1)

Restricted substances

Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

\ \ \ \ N.D. N.D. \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply ----Comply Comply Comply Comply ----Comply Comply Comply Comply ----Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply ----Comply Comply Comply Comply -----

IN BL BL BL BL

--BL BL BL BL

BL BL BL BL BL

--BL BL BL BL

---

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

Part No.

7-1

7-2

7-3

8-1

8-2

8-3

EST

Part Name

Silvery solder

Black plastic (USB plastic parts)

Silvery cover (USB cover part)

Coppery metal pin

Black plastic (switch plastic part)

Silvery metal (switch spring sheet part)

Coppery metal (switch pin part)

NO.: ESTSZ130302216R

Restricted substances

Cd Pb Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013

Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ Negative \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply ----Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply

BL BL BL BL BL

BL BL BL BL IN

--BL BL BL BL

BL BL BL BL BL

--BL BL BL BL

Page 3 of 16

---

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT Part No.

EST

Part Name

Brown solid w/ silvery metal edge (chip capacitor)

Black solid w/ silvery metal pin (IC)

Black solid w/ w/ silvery metal edge (chip dynatron)

Black solid w/ silvery metal edge (Chip resistor)

Green “PCB”

Black body w/ silvery metal pin (Mixed) (IC)

Brown solid w/ silvery metal edge (chip capacitor)

NO.: ESTSZ130302216R

Restricted substances

Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013 Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ N.D. N.D. \ \ \ \ \ \ \ \ \ \ \ \

Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply

BL BL BL BL BL

IN BL BL BL BL

BL BL BL BL BL

Page 4 of 16

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT Part No.

20-1

20-2

20-3

Part Name

Black solid w/ silvery metal edge (Chip resistor)

Black solid w/ silvery metal edge (Chip inductors)

Block solid w/ silvery metal edge (Chip diode)

Black body w/ silvery metal pin (IC)

Black plastic (connector plastic part)

Green “PCB”

Silvery metal pin (on NO. 20-1)

NO.: ESTSZ130302216R

Restricted substances

Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

EST

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013 Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

BL BL BL BL BL

Page 5 of 16

---

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT Part No.

EST

Part Name

Black solid w/ silvery metal pin (IC)

Block solid w/ silvery metal edge (Chip diode)

Block solid w/ silvery metal edge (Chip TA-capacitor)

MIC (mix all part)

Black body w/ silvery metal pin (Mixed) (IC)

Semitranspare nt solid w/ silvery metal edge (Chip LED)

NO.: ESTSZ130302216R

Restricted substances

Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013 Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

BL BL BL BL BL

Page 6 of 16

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT Part No.

Part Name

Dk-grey part w/ silvery & golden metal (mixed) (Quartz crystal resonator)

30-1

30-2

30-3

30-4

30-5

EST

Black plastic w/ silvery metal (mixed) (subminiature switch)

Silvery metal holder (speaker)

Black adhesive foam (on No. 30-1)

Copper foil (on No. 30-1)

Black cloth (In No. 30-1)

Coppery metal wire w/ red surface layer (In No. 30-1)

NO.: ESTSZ130302216R

Restricted substances

Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013 Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply ----Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply ----Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply

BL BL BL BL BL

BL BL BL BL IN

Negative

--BL BL BL BL

BL BL BL BL BL

--BL BL BL BL

BL BL BL BL BL

Page 7 of 16

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT Part No.

30-6

30-9

Part Name

Greed “PCB” (on No. 30-1)

Black metal core (in No. 30-1)

Black plastic w/ white printing 30-10 (insulation layer )

Red plastic w/ black printing 30-11 (insulation layer )

30-12

31-1

31-2

EST

Coppery metal wire

Black plastic pellets (elven types)(plastic cover)

Nature acrylonitrile-but adiene-styrene copolymer (plastic cover)

NO.: ESTSZ130302216R

Restricted substances

Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013 Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply ----Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply ----Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply

BL BL BL BL BL

--BL BL BL BL

BL BL BL BL BL

--BL BL BL BL

BL BL BL BL BL

Page 8 of 16

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT Part No.

31-3

31-4

31-5

31-6

EST

Part Name

Transparent plastic pellets (optics lens)

Green “PCB” (In No. 31-1)

Transparent grain w/ silvery metal pin (LED) (on No. 31-1)

Black plastic w/ silvery metal pin (connector) (on No. 37-1)

Blue plastic key

White plastic w/ red printing

Blue plastic base

NO.: ESTSZ130302216R

Restricted substances

Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1)

BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013 Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

BL BL BL BL BL

Page 9 of 16

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT Part No.

EST

Part Name

White plastic sheet

Silvery metal screw

NO.: ESTSZ130302216R

Restricted substances Cd Pd Hg Cr6+ PBBs PBDEs Cd Pd Hg Cr6+ PBBs PBDEs

Results of EDXRF(1) BL BL BL BL

No. of Related Test Report

Date: Mar. 21, 2013 Results in Related Test Report (mg/kg)

Result of Wet Chemical Testing(2) (mg/kg)

Conclusion on RoHS

\ \ \ \ \ \ \ \ \ \ \ \

\ \ \ \ \ \ \ \ \ Negative \ \

Comply Comply Comply Comply Comply Comply Comply Comply Comply Comply -----

BL BL BL BL IN

Page 10 of 16

---

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130302216R

Date: Mar. 21, 2013

Page 11 of 16

REMARK: (1) (a) It is the result on total Br while test item on restricted substances is PBBs/PBDEs. It is the result on total Cr while test item on restricted substances is Cr6+. (b) Results are obtained by EDXRF for primary screening, and further chemical testing by ICP (for Cd, Pb, Hg), UV-VIS (for CrVI) and GCMSD (for PBBs, PBDEs) is recommended to be performed, if the concentration exceeds the below warning value according to IEC 62321, Ed.1 111/54/CDV (unit: mg/kg) Element

Polymer

Metal

Composite Materials

BL≤(70-3σ)<X<(130+3σ) ≤OL

LOD<X<(150+3σ) ≤OL

BL≤(700-3σ)<X<(1300+3σ) ≤OL

BL≤500-3σ)<X<(1500+3σ) ≤OL

BL≤(700-3σ)<X<(1300+3σ) ≤OL

BL≤500-3σ)<X<(1500+3σ) ≤OL

BL≤(70-3σ)<X

BL<X<(500-3σ) ≤X

(c) OL = Over Limit, BL = Below Limit, IN = Inconclusive, LOD = Limit of Detection (d) The XRF screening test for RoHS elements – The reading may be different to the actual content in the sample be of non-uniformity composition (2) (a) mg/kg = ppm=0.0001%, N.D. = not detected (<MDL), --- = not conducted. (b) Unit and Method Detection Limit (MDL) in wet chemical test

Test Items

Units

mg/kg

MDL

The MDL for single compound of PBBs & PBDEs is 5 mg/kg and MDL of Cr6+ for polymer & composite sample is 2 mg/kg. (c) According to IEC 62321:2008, result on Cr6+ for metal sample is shown as Positive/Negative. Negative= Absence of Cr6+ coating, Positive = Presence of Cr6+ coating. Storage conditions and production date of the tested sample are unavailable and thus results of Cr(VI) represent status of the sample at the time of testing.

EST

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130302216R

Date: Mar. 21, 2013

Page 12 of 16

DESCRIPTION OF PHOTO:

ESTSZ130302216R

1 4

EST

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130302216R

Date: Mar. 21, 2013

Page 13 of 16

ESTSZ130302216R

5 13 6

10 8

ESTSZ130302216R

15 18 17 16

EST

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130302216R

Date: Mar. 21, 2013

Page 14 of 16

ESTSZ130302216R

24 23

EST

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130302216R

Date: Mar. 21, 2013

Page 15 of 16

ESTSZ130302216R 25

ESTSZ130302216R

EST

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640

TEST REPORT

NO.: ESTSZ130302216R

Date: Mar. 21, 2013

Page 16 of 16

ESTSZ130302216R

32 34

EST authenticate the photo on original report only ***** End of Report *****

EST

SHENZHEN EXACT STANDARD TESTING TECHNOLOGY CO., LTD. th

4/F, 7 Building, Xinyuan Industrial Park, Xinguang Road, Xili, Nanshan District, Shenzhen 518055, China (Attention is drawn to the terms and conditions printed overleaf)

Fax: 86-755-26648637 http://www.estcl..com

Hotline 86-755-2664 8640