Rhino Final Portfolio Dylan Bermingham Fall 2017
Page 2
Page 3
Table of Contents Table of Contents Assignment 1 Assignment 2 Assignment 3 Assignment 4 Assignment 5 Assignment 6 Assignment 7 Assignment 8
Pg. 3 Pg. 4-5 Pg. 6-7 Pg. 8-11 Pg. 12-15 Pg. 16-19 Pg. 20-23 Pg. 24-29 Pg. 30-33
Assignment 1: Multi View Drawing Narrative: Create a mulit View Drawing of of various solid geometries that includes a plan, two elevations and use different line weights Strengths: I think that our project overall is strong, we chose shapes that vary in shape, sixe, height, length. The drawing that we produced has all required views and is very clean to see and understand Weaknesses: The weakest part of our drawing is the use of line weight. I think that we were able to communicate what we wnated with the line weights that we have however i think that we could have done some more varriation in line weights to convey things that are in front and in the back better Opportunities: If i were to repeat this project i would probably try to add some more shapes and space things out more in a way that the drawing could have been represented in a more clear concise way Risks: Problems that i could see if i were to do it again would be that adding more objects like i would want to could make it a more interesting project but all clutter the layout and make it too overwhelming
Page 4 Assignment 1
Page 5 Assignment 1
Assignment 2 : Folding Planar Objects Narrative: The objective of this assignment is to create a poly-surface object by folding a polygonal shape a minimum of 4 times. Strengths: I think that we did a good job in folding the polygonal shape many times to come up with a shape that would allow for an interesting layout and expldoded axon. Weaknesses: The weakest part of our project is the exploded axon drawing. The way that we made it convays what we want but it is not done in the best way that it coudlve been done. Opportunities: If i were to do this project again something i would have done differntly is take a section cut from a different or multiple angles to really show on the folds throughout the object Risks: Problems i woudl see if i were to do this problem differently would be that i can see trying to have drawings that show off the shape in some differnt ways but that ending up causing some confusion
Page 6 Assignment 2
Page 7 Assignment 2
Plan
Section
Exploded Axon
Front Elevation
Right Side Elevation
Assignment 3: Boolean Objects
Page 8 Assignment 3
Narrative: The objective of this project was to use cutting planes to carve away at a rectangle and then boolean a shape through the carved away rectangle and create a model that you can unrollsrf and create out of heavy print paper.
Steps for creating model
Create Solid Object
Use Clipping Plaanes to Change Object Shape
Boolean Shape Through Created Shape
Rotated Views of Created Shape
Strengths: I think a stong part of this project was creating an obscure shape with a hole punched through that we were able to create into a paper model.
Page 9 Assignment 3
Unrollsrf command to create makeable 3D object Weaknesses: I think that our rhino model accomplished the goal of the assignment well. I think that the weak aspect of our project was the actual construction of the paper model and way that it was put together with tape and it being slightly crushed
Page 10 Assignment 3
Page 11
Assignment 4: Grafting
Page 12 Assignment 4
Narrative: The objective of this assignment was to construct a graft surface inbetween two existing Nurbs surfaces using tangencies to the existing surfaces as the basis for the new surface
Nurbs Surfaces Nick and Dylan / Assignment 4 / 7Original Tangencies Steps for Creating New Surface
Create Boarder for New Surface
S.V.1 S.V.2 S.V.3 S.V.4 S.U.1
Extract Isocurves from Existing Surfaces
S.V.1
Use Clipping Planes to Create New Tanget Curves
S.V.2
S.V.3
New Surface
S.V.4
Create Boarder for New Surface
S.V.1 S.V.2 S.V.3 S.V.4
Extract Isocurves from Existing Surfaces
S.V.1
Use Clipping Planes to Create New Tanget Curves
S.V.2
S.V.3
New Surface
S.V.4
S.U.1 S.U.2
S.U.3 S.U.4
S.U.1
Section cuts of of U and V planes of the surfaces to show tangencies points 7 Tangencies Total
S.U.2
S.U.3
S.U.4
Strengths: In this assignment a strenth that we hah was our ability to get more then the minimum of three tangencies and being able to produce clear drawings that show the process and end product. This allowed us to be able to communicate our work in a way that most people would understand Weaknesses: This project was definitely a tough projet to do and we ran into some issues through the process. The toughest part of the project was being able to create curves that were tangent to exactly one point on the existing surfaces. Another part that was tough that we accomplished but coudlve been done better was creating the process of how we got to our final product drawings. I think they do the job but they are very vage in description and are not the best produced drawings and for someone who knew nothing about the project or Rhino might not understand what we did or how we got what we got
Page 13 Assignment 4
S.U.1
S.U.2
S.U.3
S.U.4
Opportunities: If i were to repeat this project and had more time to work on it something i would have done differently would be to try and get a higher number of tangencies and create an even more organic looking surface. Another thing i would have tried to do differently would be to create some more drawings that help explain the project as a whole
Page 14 Assignment 4
Page 15 Assignment 4
Risks: Some problems i would see encountering if i were to redo the project would be that if i were to try and have more tangencies in the surface it would start to get much more difficult to create the curves and keep track of the tangencies and make sure that they all are legitimate tangencies
Assignment 5 : Mashrabiya Narrative: Create a Mashrabiya design inspired from research of different existing designs
Inspiration
Initial Paper 2D Paper Model
Page 16 Assignment 5
Steps for Creation of Individual Unit
Strengths: In this project i think that the strongest aspect of what we created was having a very simple design in the begining stages that is esaily undertood in the way it was thought of and created yet in the end produces a much more complex final product
Elevation of Individial Unit
Plan of Individual Unit
Page 17 Assignment 5
Mirrioring and Multiplication of Individual Unit
Page 18 Assignment 5
Weaknesses: There were a couple things that we wanted to have our design include that we didnt get to doing or had trouble accomplishing. One thing was that we wanted to offset that individaul stacked units so that the straight vertival lines that we see no would not exist and it would create and even more complex looking design but we thought of it to late in the project that we didnt have enough time to go figure out how to accomplish that with our already created individual unit
Page 19 Assignment 5
Risks: Problems that i would see encountering while doing things differently in this project would be to actually think about structural integrity of the wall if it were actually created. I think if i went back i would want to make things more complex which in turn would make the ability for this to be created much more difficult Opportunites: If i were to repeat this project some some things that i would have done differently would have been to explore more in the begining sketching stages when making the individual unit think and thinking about the stacked overall look of the idea for the unit more then focusing on the unit itself as much
Shadows Created from Structure from multiple views
Dylan a Assignment 5: Mashrabiy Ar 10/
Assignment 6 : Anamorphic Projection
Page 20 Assignment 6
Narrative: The purpose of this assignment was to generate a projection of 4 solids from a specific camera view and then create another projection that looks the same from the given perspective to show that you can create the same image using only planar surfaces on solids. This assignmtn helped us learn how to use a the cmera and ligh tools in Rhino
Front
Right
Top
Page 21 Assignment 6
Strengths: I would say for this project overall it is preety stong. We used some basic shapes in a organized way that allows us to show off what we need to usinig the different lightings
Camera and Lights Position for Planes
Weaknesses: I think that the part of this project that couldve been improved the most was the rendering of the views. I think that if we had more time we could have worked on the colors we used for the solids and surfaces as well as possibly finding a way of lighing that would enhance the differnces and shadows more.
Camera and Lights Position for Solids
Page 22 Assignment 6
Risks: Issues that i could see encountering if i were to do this project differently would be if i were to use more complex shapes that when trying to create planes to match the solids could become very complex and difficult
View of Planes with shadows
View of Solids with shadows
Page 23 Assignment 6
Opportunities: Some opportunities that i coul dhave in repeating this prohject would be to use more complex shapes becuse in doing that you could really use lights and shadows to show how you can make a complex set up using only planes to look the sane as the solids
View of Planes to show similarity
View of Solids to show similarity
Assignment 7 : Chess Piece
Page 24 Assignment 7
Narrative: This project was a whole class project where we were split into two teams and each team had to create a full set of chess pieces centered around a central theme. The group that i was a part of decied that we wanted our pieces to look somewhat natural and to seem like they were twisting and growing out of the base. This project was to help us use cage edit, basic transformations like twist, taper and bend. We also had to analyze our solids to make sure it is completly closed becasue we would have them 3D printed.
My Piece: The Rook
Page 25 Assignment 7
Strengths: I would say that the stongest aspect of my piece is successfully using cage edit to make it look like it is growing out from the base and that the top part still is recognizable as the rook piece if you know what the rook piece looks like and theme of design. Base Piece that Whole Team Used 1� in Diameter
Started with Cylinder
Tapered Cylinder
Used Cage edit to Trandsform Cylinder
Final Shape
Page 26 Assignment 7
Started with Cylinder
Tapered Cylinder
Multiplied Cylinder
Joined with Tapered Cylinder
All three parts of piece joined together
Cage Edit
Final Shape
Weaknesses: I would say that the wesakest part of my piece is the top. I think that there are some other ways that i could have made the top look like it was still growing more and the tapered cylinders at the top could be more complex of a shape Risks: A risk that i would see encountering if i were to redo this project is that if i tried to make the top and overall piece more complex at the size that we are printing the pieces is that it may not actually print completly the way that it was designed because of small part sbeing hard to print.
1.25�
Page 27 Assignment 7
Opportunities: I think that there are a lot of opportunities with this project. I think that for my individual piece i could have made it more complex and have more ties to the original rook piece. For the overall group i think that we could jave had a lot more of specific things each peiece would have so that all of the pieces look more related
Page 28 Assignment 7
Full Board Rhino Models Used to Print Pieces
Full Board 3D Printed
My Piece (Gold Team)
Perspectives of Full Printed Chess Set
Page 29 Assignment 7
Assignment 7 : Curtain Wall House
Page 30 Assignment 8
Narrative: For this assignment we had to fully model the Curtain Wall House in Japan based off the plans. Once that is complete we had to alter the original house and create a new house based off ideas that we thoght would benifit the hosue. For my redone house i thought adding a rooftop garden would add to the open idea of the house and the way to get to the roof i added a spiral outdoor staircase. To add the staircase we had to change the floor plan of the second floor from 3 bedrooms to 2 and change the area of the staircase to a living room are that leads to an outsdie deck which the stairs go up from. The last change to the house was removing one of the curtains and adding a mashriyaba wall that we had created in an earlier project to still have an open flow but allows for it to seem more enclosed
Original House
Updated House
Page 31 Assignment 8
Plans Used to Create Original Model
Elevation
First Floor
Second Floor
Strengths: I think the strongest part of this peoject was our ability to create the full model from the original plans with not many issues. I think that the stongest part of our updating of the building is the roof patio/garden becuse it adds another level to the house and give some outside area to hang out with which there isnt much of in the surrounding area.
Page 32 Assignment 8
Weaknesses: I think that we could have redeveloped the inside of the house more to create a completly new overall feel of the house. Another area of the house we didnt do to much with is the ground floor which has potential for a lot to be done. Risks: Some issues with altering this house again could included altering the floor plans in a way that makes the house more closed oof and has less rooms. Another issue could be if you tried to add a room on the ground floor to be used there may not be any where to park cars Opportunites: There are a lot of opportunites to change this house in other ways such as creating a completly different roof curtain structure along with an overall design that give the same feel of house but look completly different then just a house with curtains as walls
Page 33 Assignment 8